Daily Papers

Computer architecture has long used benchmarks to make progress measurable. LLM agents create a different measurement problem: success is not merely writing code or tuning parameters. The agent must interpret workloads, choose mechanisms, use simulators, predict performance, satisfy hard constraints, and decide which feasible design is worth evaluating. This paper introduces ArchEval, a benchmark and platform for evaluating LLM agents on computer architecture design and optimization. It contains 20 challenges across CPU core mechanisms, system architecture, memory systems, accelerators, and compute-in-memory, backed by eight simulators. Each challenge is posed under three settings: L1 full harness, with repeated simulator feedback; L2 simulator-code container, where simulator source is available but the agent must assemble its own workflow; and L3 agent-only, with no runnable feedback before submission. Each run reports baseline-normalized verifier performance and records the full trajectory, connecting results to workload analysis, simulator-tool use, prediction, constraint handling, and artifact integrity. Initial results show a sharp boundary in current agents. With L1 support, all four evaluated agents reach or exceed baseline and improve real designs across diverse simulators. Removing support exposes weaknesses: many agents fail to turn simulator source into useful experiments, and L3 predictions often disagree with verifier results. In L3, only GPT-5.5 + Codex remains above baseline, reaching 1.21x geomean performance and a 65% win rate; the other three fall below baseline. Even GPT-5.5 + Codex has only a 15% performance-modeling pass rate. ArchEval frames today's agents as useful optimization assistants rather than autonomous architects, and identifies capabilities needed next: simulator-tool use, calibrated prediction, pre-feedback judgment, and useful mechanism discovery.

Large language models (LLMs) can call tools effectively, yet they remain brittle in multi-turn execution: following a tool call error, smaller models often degenerate into repetitive invalid re-invocations, failing to interpret error feedback and self-correct. This brittleness hinders reliable real-world deployment, where the execution errors are inherently inevitable during tool interaction procedures. We identify a key limitation of current approaches: standard reinforcement learning (RL) treats errors as sparse negative rewards, providing no guidance on how to recover, while pre-collected synthetic error-correction datasets suffer from distribution mismatch with the model's on-policy error modes. To bridge this gap, we propose Fission-GRPO, a framework that converts execution errors into corrective supervision within the RL training loop. Our core mechanism fissions each failed trajectory into a new training instance by augmenting it with diagnostic feedback from a finetuned Error Simulator, then resampling recovery rollouts on-policy. This enables the model to learn from the precise errors it makes during exploration, rather than from static, pre-collected error cases. On the BFCL v4 Multi-Turn, Fission-GRPO improves the error recovery rate of Qwen3-8B by 5.7% absolute, crucially, yielding a 4% overall accuracy gain (42.75% to 46.75%) over GRPO and outperforming specialized tool-use agents.

The recent paradigm shift toward large reasoning models (LRMs) as autonomous agents has intensified the demand for sophisticated, multi-turn tool-use capabilities. Yet, existing datasets and data-generation approaches are limited by static, predefined toolsets that cannot scale to the complexity of open-ended human-agent collaboration. To address this, we initially developed a framework for automated task-oriented multi-turn dialogue generation at scale, utilizing an LRM-based simulator to dynamically generate high-value, domain-specific tools to solve specified tasks. However, we observe that a purely task-oriented design often results in "solely task-solving" trajectories, where the agent completes the objective with minimal interaction, failing to generate the high turn-count conversations seen in realistic scenarios. To bridge this gap, we shift toward a user-oriented simulation paradigm. By decoupling task generation from a dedicated user simulator that mimics human behavioral rules - such as incremental request-making and turn-by-turn feedback - we facilitate more authentic, extended multi-turn dialogues that reflect the iterative nature of real-world problem solving. Our generation pipeline operates as a versatile, plug-and-play module capable of initiating generation from any state, ensuring high scalability in producing extended tool-use data. Furthermore, by facilitating multiple task completions within a single trajectory, it yields a high-density dataset that reflects the multifaceted demands of real-world human-agent interaction.

Enabling Large Language Models (LLMs) to reliably invoke external tools remains a critical bottleneck for autonomous agents. Existing approaches suffer from three fundamental challenges: expensive human annotation for high-quality trajectories, poor generalization to unseen tools, and quality ceilings inherent in single-model synthesis that perpetuate biases and coverage gaps. We introduce InfTool, a fully autonomous framework that breaks these barriers through self-evolving multi-agent synthesis. Given only raw API specifications, InfTool orchestrates three collaborative agents (User Simulator, Tool-Calling Assistant, and MCP Server) to generate diverse, verified trajectories spanning single-turn calls to complex multi-step workflows. The framework establishes a closed loop: synthesized data trains the model via Group Relative Policy Optimization (GRPO) with gated rewards, the improved model generates higher-quality data targeting capability gaps, and this cycle iterates without human intervention. Experiments on the Berkeley Function-Calling Leaderboard (BFCL) demonstrate that InfTool transforms a base 32B model from 19.8% to 70.9% accuracy (+258%), surpassing models 10x larger and rivaling Claude-Opus, and entirely from synthetic data without human annotation.

Long-horizon tool-using agents must reason over user goals, domain policies, tool calls, simulator state, and delayed verifiable rewards. Reinforcement learning (RL) is a natural fit for this setting, but multi-turn on-policy rollouts create long contexts, while model-specific attention layers may require custom masks and learned sink normalization. We present SINKFLEX-RL, a modular training system for RL in dual-control tool-use environments. The system combines a Gymnasium-compatible environment wrapper, a VERL-style rollout dataflow, group-relative policy optimization without a separate value model, and a sink-aware FlexAttention path designed to preserve model-specific sink scaling under causal and sliding-window masks. In a preliminary Tau2Bench retail run, validation reward (mean@1) rises from 0.25 early in training to 0.44 later in the observed training window, while training-score and trajectory-reward proxies also trend upward. In a fixed-configuration memory benchmark, the optimized attention path reduces peak VRAM from 28.06GB to 22.52GB at 4096 tokens, a 19.7% reduction, and runs the measured 8192-token configuration using 25.53~GB where the eager baseline runs out of memory. These results illustrate the value of integrating environment interfaces, RL dataflow, and attention-kernel design for memory-feasible long-horizon agent training.

Recent large language models (LLMs) advancements sparked a growing research interest in tool assisted LLMs solving real-world challenges, which calls for comprehensive evaluation of tool-use capabilities. While previous works focused on either evaluating over stateless web services (RESTful API), based on a single turn user prompt, or an off-policy dialog trajectory, ToolSandbox includes stateful tool execution, implicit state dependencies between tools, a built-in user simulator supporting on-policy conversational evaluation and a dynamic evaluation strategy for intermediate and final milestones over an arbitrary trajectory. We show that open source and proprietary models have a significant performance gap, and complex tasks like State Dependency, Canonicalization and Insufficient Information defined in ToolSandbox are challenging even the most capable SOTA LLMs, providing brand-new insights into tool-use LLM capabilities. ToolSandbox evaluation framework is released at https://github.com/apple/ToolSandbox

Human intelligence emerged through the process of natural selection and evolution on Earth. We investigate what it would take to re-create this process in silico. While past work has often focused on low-level processes (such as simulating physics or chemistry), we instead take a more targeted approach, aiming to evolve agents that can accumulate open-ended culture and technologies across generations. Towards this, we present JaxLife: an artificial life simulator in which embodied agents, parameterized by deep neural networks, must learn to survive in an expressive world containing programmable systems. First, we describe the environment and show that it can facilitate meaningful Turing-complete computation. We then analyze the evolved emergent agents' behavior, such as rudimentary communication protocols, agriculture, and tool use. Finally, we investigate how complexity scales with the amount of compute used. We believe JaxLife takes a step towards studying evolved behavior in more open-ended simulations. Our code is available at https://github.com/luchris429/JaxLife

While Vision-Language Models (VLMs) have shown strong visual reasoning capabilities, their spatial reasoning abilities remain largely constrained to the observed images and text-oriented chain-of-thought. They often struggle to infer unobserved layouts, maintain cross-view consistency, and reason from alternative viewpoints when only limited egocentric observations are available. In this work, we study this problem as thinking with imagination, where a VLM actively acquires imagined visual evidence by interacting with a world simulator during reasoning. We propose Astra, an agentic spatial reasoning framework that empowers VLMs with action-conditioned visual imagination. Specifically, Astra couples Astra-VL, an RL-trained VLM policy, with Astra-WM, a Bagel-based world simulator that generates novel-view observations from context images and natural-language camera motions. To provide reliable imagined evidence, Astra-WM is trained with view consistency tuning to improve pose and content consistency across views. In the RL stage, we propose a world-simulator-in-the-loop two-phase RL curriculum to stabilize tool-use exploration and advance the model's ability to invoke the simulator only when imagined observations improve over direct answering. Experiments demonstrate that both the world simulator and the agentic policy are necessary: Astra-WM improves simulator-augmented Gemini-3-Flash on MMSI-Bench from 45.1 to 49.5, while Astra-VL improves the Qwen3-VL backbone from 29.8 to 38.8 on MMSI-Bench and from 36.8 to 42.7 on MindCube. These results show that imagined observations can provide useful spatial evidence, but effective world-model-augmented reasoning requires learning when, where, and how to imagine.

Robust task-oriented spoken dialogue agents require exposure to the full diversity of how people interact through speech. Building spoken user simulators that address this requires large-scale spoken task-oriented dialogue (TOD) data encompassing spoken user behaviors, yet existing datasets are limited in scale and domain coverage, with no systematic pipeline for augmenting them. To address this, we introduce SpokenTOD, a spoken TOD dataset of 52,390 dialogues and 1,034 hours of speech augmented with four spoken user behaviors -- cross-turn slots, barge-in, disfluency, and emotional prosody -- across diverse speakers and domains. Building on SpokenTOD, we present SpokenUS, a spoken user simulator grounded in TOD with a dedicated architecture for barge-in. SpokenUS achieves comparable goal coverage to significantly larger models while substantially outperforming all baselines in Human MOS, disclosing slot values gradually across the dialogue as humans do rather than front-loading them. Further analysis confirms that SpokenUS's spoken behaviors pose meaningful challenges to downstream agents, making it a practical tool for training and evaluating more robust spoken dialogue systems.

Simulators are indispensable for research in autonomous systems such as self-driving cars, autonomous robots and drones. Despite significant progress in various simulation aspects, such as graphical realism, an evident gap persists between the virtual and real-world environments. Since the ultimate goal is to deploy the autonomous systems in the real world, closing the sim2real gap is of utmost importance. In this paper, we employ a state-of-the-art approach to enhance the photorealism of simulated data, aligning them with the visual characteristics of real-world datasets. Based on this, we developed CARLA2Real, an easy-to-use, publicly available tool (plug-in) for the widely used and open-source CARLA simulator. This tool enhances the output of CARLA in near real-time, achieving a frame rate of 13 FPS, translating it to the visual style and realism of real-world datasets such as Cityscapes, KITTI, and Mapillary Vistas. By employing the proposed tool, we generated synthetic datasets from both the simulator and the enhancement model outputs, including their corresponding ground truth annotations for tasks related to autonomous driving. Then, we performed a number of experiments to evaluate the impact of the proposed approach on feature extraction and semantic segmentation methods when trained on the enhanced synthetic data. The results demonstrate that the sim2real gap is significant and can indeed be reduced by the introduced approach.

Nowadays, realistic simulation environments are essential to validate and build reliable robotic solutions. This is particularly true when using Reinforcement Learning (RL) based control policies. To this end, both robotics and RL developers need tools and workflows to create physically accurate simulations and synthetic datasets. Gazebo, MuJoCo, Webots, Pybullets or Isaac Sym are some of the many tools available to simulate robotic systems. Developing learning-based methods for space navigation is, due to the highly complex nature of the problem, an intensive data-driven process that requires highly parallelized simulations. When it comes to the control of spacecrafts, there is no easy to use simulation library designed for RL. We address this gap by harnessing the capabilities of NVIDIA Isaac Gym, where both physics simulation and the policy training reside on GPU. Building on this tool, we provide an open-source library enabling users to simulate thousands of parallel spacecrafts, that learn a set of maneuvering tasks, such as position, attitude, and velocity control. These tasks enable to validate complex space scenarios, such as trajectory optimization for landing, docking, rendezvous and more.

Multi-turn LLM agents interleave model calls with external tool invocations, shifting serving from stateless request processing to stateful program execution. Serving these workloads requires scheduling, KV-cache management, and routing policies that use program-level context, including turn dependencies, tool-induced gaps, and reusable KV state. Evaluating such policies directly on real systems is costly, since each design point may require dedicated accelerator time across arrival rates, model scales, serving-instance counts, and memory hierarchies. Simulation offers a scalable alternative, but existing LLM serving simulators target stateless request-level workloads and therefore omit the core dynamics of agent serving: multi-turn program execution, cross-turn cache locality, and KV-cache residency during tool gaps. We present AGENTSERVESIM, a hardware-aware simulator for multi-turn LLM agent serving. AGENTSERVESIM evaluates serving policies at program granularity through composable modules: a Program Orchestrator preserves program identity and turn order, a Tool Simulator materializes tool-induced gaps, a Session-Aware Router maintains program-to-instance affinity for cache-aware dispatch, and a KV Residency Model tracks policy-defined KV placement across HBM, host DRAM/CXL, and eviction. Across real serving deployments and hardware configurations, AGENTSERVESIM reproduces real-system behavior within 6% error across key performance metrics while running entirely on commodity CPUs. These results show that AGENTSERVESIM enables controlled, repeatable exploration of agent-serving policies without requiring exhaustive deployment on costly accelerators.

Small LLMs often struggle to match the agentic capabilities of large, costly models. While reinforcement learning can help, progress has been limited by two structural bottlenecks: existing open-source agentic training data are narrow in task variety and easily solved; real-world APIs lack diversity and are unstable for large-scale reinforcement learning rollout processes. We address these challenges with SYNTHAGENT, a framework that jointly synthesizes diverse tool-use training data and simulates complete environments. Specifically, a strong teacher model creates novel tasks and tool ecosystems, then rewrites them into intentionally underspecified instructions. This compels agents to actively query users for missing details. When handling synthetic tasks, an LLM-based user simulator provides user-private information, while a mock tool system delivers stable tool responses. For rewards, task-level rubrics are constructed based on required subgoals, user-agent interactions, and forbidden behaviors. Across 14 challenging datasets in math, search, and tool use, models trained on our synthetic data achieve substantial gains, with small models outperforming larger baselines.

This paper presents an experimental study regarding the use of OpenAI's ChatGPT for robotics applications. We outline a strategy that combines design principles for prompt engineering and the creation of a high-level function library which allows ChatGPT to adapt to different robotics tasks, simulators, and form factors. We focus our evaluations on the effectiveness of different prompt engineering techniques and dialog strategies towards the execution of various types of robotics tasks. We explore ChatGPT's ability to use free-form dialog, parse XML tags, and to synthesize code, in addition to the use of task-specific prompting functions and closed-loop reasoning through dialogues. Our study encompasses a range of tasks within the robotics domain, from basic logical, geometrical, and mathematical reasoning all the way to complex domains such as aerial navigation, manipulation, and embodied agents. We show that ChatGPT can be effective at solving several of such tasks, while allowing users to interact with it primarily via natural language instructions. In addition to these studies, we introduce an open-sourced research tool called PromptCraft, which contains a platform where researchers can collaboratively upload and vote on examples of good prompting schemes for robotics applications, as well as a sample robotics simulator with ChatGPT integration, making it easier for users to get started with using ChatGPT for robotics.

Traditional methods for automating recommender system design, such as Neural Architecture Search (NAS), are often constrained by a fixed search space defined by human priors, limiting innovation to pre-defined operators. While recent LLM-driven code evolution frameworks shift fixed search space target to open-ended program spaces, they primarily rely on scalar metrics (e.g., NDCG, Hit Ratio) that fail to provide qualitative insights into model failures or directional guidance for improvement. To address this, we propose Self-EvolveRec, a novel framework that establishes a directional feedback loop by integrating a User Simulator for qualitative critiques and a Model Diagnosis Tool for quantitative internal verification. Furthermore, we introduce a Diagnosis Tool - Model Co-Evolution strategy to ensure that evaluation criteria dynamically adapt as the recommendation architecture evolves. Extensive experiments demonstrate that Self-EvolveRec significantly outperforms state-of-the-art NAS and LLM-driven code evolution baselines in both recommendation performance and user satisfaction. Our code is available at https://github.com/Sein-Kim/self_evolverec.

Equipping LLMs with tool-use capabilities via Agentic Reinforcement Learning (Agentic RL) is bottlenecked by two challenges: the lack of scalable, robust execution environments and the scarcity of realistic training data that captures implicit human reasoning. Existing approaches depend on costly real-world APIs, hallucination-prone LLM simulators, or synthetic environments that are often single-turn or depend on pre-collected documents. Moreover, synthetic trajectories are frequently over-specified, resembling instruction sequences rather than natural human intents, reducing their effectiveness for RL training. We introduce EnvFactory, a fully automated framework that addresses both challenges. EnvFactory autonomously explores and verifies stateful, executable tool environments from authentic resources, and synthesizes natural multi-turn trajectories through topology-aware sampling and calibrated refinement, producing grounded queries with implicit intents. Using only 85 verified environments across 7 domains, EnvFactory generates 2,575 SFT and RL trajectories. Despite using significantly fewer environments than prior work, which are often 5 times more, EnvFactory achieves superior training efficiency and downstream performance, improving Qwen3-series models by up to +15% on BFCLv3, +8.6% on MCP-Atlas, and +6% on conversational benchmarks including τ^2-Bench and VitaBench. By fully automating both environment construction and trajectory synthesis, EnvFactory provides a scalable, extensible, and robust foundation for Agentic RL.

Training large language model agents for long-horizon tool use typically relies on interactions with real or synthesized executable environments, whose construction and verification are costly, or on external simulators that are difficult to ground. We introduce EnvACE, an agentic reinforcement learning method that replaces external environment interaction during training with world rehearsal. The policy alternates between acting and rehearsal: it first generates a tool call, then plays the role of the environment to produce the response induced by that action, and conditions subsequent decisions on the rehearsed response. Both roles are jointly optimized end-to-end using task-success rewards. Through world rehearsal, the policy internalizes the relationship between actions and their environment responses in its parameters, yielding an agent world model that directly supports decision making. Across BFCL-v4, tau^2-Bench, VitaBench, and FinMCP-Bench, EnvACE achieves strong and transferable performance, outperforming environment-scaling baselines in the overall evaluation. Controlled studies further show that world rehearsal consistently improves policy learning across model scales. At test time, the internalized world model enables private rehearsal before committed execution, yielding further gains under a moderate rehearsal budget without additional external interaction. Our findings establish world rehearsal as a new path toward scaling LLM agent training beyond the constraints of external environments. Our code is publicly available at https://github.com/Within-yao/EnvACE.

We present Qiskit Machine Learning (ML), a high-level Python library that combines elements of quantum computing with traditional machine learning. The API abstracts Qiskit's primitives to facilitate interactions with classical simulators and quantum hardware. Qiskit ML started as a proof-of-concept code in 2019 and has since been developed to be a modular, intuitive tool for non-specialist users while allowing extensibility and fine-tuning controls for quantum computational scientists and developers. The library is available as a public, open-source tool and is distributed under the Apache version 2.0 license.

We introduce Infinigen Indoors, a Blender-based procedural generator of photorealistic indoor scenes. It builds upon the existing Infinigen system, which focuses on natural scenes, but expands its coverage to indoor scenes by introducing a diverse library of procedural indoor assets, including furniture, architecture elements, appliances, and other day-to-day objects. It also introduces a constraint-based arrangement system, which consists of a domain-specific language for expressing diverse constraints on scene composition, and a solver that generates scene compositions that maximally satisfy the constraints. We provide an export tool that allows the generated 3D objects and scenes to be directly used for training embodied agents in real-time simulators such as Omniverse and Unreal. Infinigen Indoors is open-sourced under the BSD license. Please visit https://infinigen.org for code and videos.

AI agents are increasingly used to solve real-world tasks by reasoning over multi-turn user interactions and invoking external tools. However, applying reinforcement learning to such settings remains difficult: realistic objectives often lack verifiable rewards and instead emphasize open-ended behaviors; moreover, RL for multi-turn, multi-step agentic tool use is still underexplored; and building and maintaining executable tool environments is costly, limiting scale and coverage. We propose CM2, an RL framework that replaces verifiable outcome rewards with checklist rewards. CM2 decomposes each turn's intended behavior into fine-grained binary criteria with explicit evidence grounding and structured metadata, turning open-ended judging into more stable classification-style decisions. To balance stability and informativeness, our method adopts a strategy of sparse reward assignment but dense evaluation criteria. Training is performed in a scalable LLM-simulated tool environment, avoiding heavy engineering for large tool sets. Experiments show that CM2 consistently improves over supervised fine-tuning. Starting from an 8B Base model and training on an 8k-example RL dataset, CM2 improves over the SFT counterpart by 8 points on tau^-Bench, by 10 points on BFCL-V4, and by 12 points on ToolSandbox. The results match or even outperform similarly sized open-source baselines, including the judging model. CM2 thus provides a scalable recipe for optimizing multi-turn, multi-step tool-using agents without relying on verifiable rewards. Code provided by the open-source community: https://github.com/namezhenzhang/CM2-RLCR-Tool-Agent.

Many animals, and an increasing number of artificial agents, display sophisticated capabilities to perceive and manipulate objects. But human beings remain distinctive in their capacity for flexible, creative tool use -- using objects in new ways to act on the world, achieve a goal, or solve a problem. To study this type of general physical problem solving, we introduce the Virtual Tools game. In this game, people solve a large range of challenging physical puzzles in just a handful of attempts. We propose that the flexibility of human physical problem solving rests on an ability to imagine the effects of hypothesized actions, while the efficiency of human search arises from rich action priors which are updated via observations of the world. We instantiate these components in the "Sample, Simulate, Update" (SSUP) model and show that it captures human performance across 30 levels of the Virtual Tools game. More broadly, this model provides a mechanism for explaining how people condense general physical knowledge into actionable, task-specific plans to achieve flexible and efficient physical problem-solving.

Large Language Models (LLMs) have displayed massive improvements in reasoning and decision-making skills and can hold natural conversations with users. Recently, many tool-use benchmark datasets have been proposed. However, existing datasets have the following limitations: (1). Insufficient evaluation scenarios (e.g., only cover limited tool-use scenes). (2). Extensive evaluation costs (e.g., GPT API costs). To address these limitations, in this work, we propose a multi-granularity tool-use benchmark for large language models called MTU-Bench. For the "multi-granularity" property, our MTU-Bench covers five tool usage scenes (i.e., single-turn and single-tool, single-turn and multiple-tool, multiple-turn and single-tool, multiple-turn and multiple-tool, and out-of-distribution tasks). Besides, all evaluation metrics of our MTU-Bench are based on the prediction results and the ground truth without using any GPT or human evaluation metrics. Moreover, our MTU-Bench is collected by transforming existing high-quality datasets to simulate real-world tool usage scenarios, and we also propose an instruction dataset called MTU-Instruct data to enhance the tool-use abilities of existing LLMs. Comprehensive experimental results demonstrate the effectiveness of our MTU-Bench. Code and data will be released at https: //github.com/MTU-Bench-Team/MTU-Bench.git.

Integrating external tools into Large Foundation Models (LFMs) has emerged as a promising approach to enhance their problem-solving capabilities. While existing studies have demonstrated strong performance in tool-augmented Visual Question Answering (VQA), recent benchmarks reveal significant gaps in real-world tool-use proficiency, particularly in functionally diverse multimodal settings requiring multi-step reasoning. In this work, we introduce ToolVQA, a large-scale multimodal dataset comprising 23K instances, designed to bridge this gap. Unlike previous datasets that rely on synthetic scenarios and simplified queries, ToolVQA features real-world visual contexts and challenging implicit multi-step reasoning tasks, better aligning with real user interactions. To construct this dataset, we propose ToolEngine, a novel data generation pipeline that employs Depth-First Search (DFS) with a dynamic in-context example matching mechanism to simulate human-like tool-use reasoning. ToolVQA encompasses 10 multimodal tools across 7 diverse task domains, with an average inference length of 2.78 reasoning steps per instance. The fine-tuned 7B LFMs on ToolVQA not only achieve impressive performance on our test set but also surpass the large close-sourced model GPT-3.5-turbo on various out-of-distribution (OOD) datasets, demonstrating strong generalizability to real-world tool-use scenarios.

The ability to manipulate tools significantly expands the set of tasks a robot can perform. Yet, tool manipulation represents a challenging class of dexterity, requiring grasping thin objects, in-hand object rotations, and forceful interactions. Since collecting teleoperation data for these behaviors is challenging, sim-to-real reinforcement learning (RL) is a promising alternative. However, prior approaches typically require substantial engineering effort to model objects and tune reward functions for each task. In this work, we propose SimToolReal, taking a step towards generalizing sim-to-real RL policies for tool manipulation. Instead of focusing on a single object and task, we procedurally generate a large variety of tool-like object primitives in simulation and train a single RL policy with the universal goal of manipulating each object to random goal poses. This approach enables SimToolReal to perform general dexterous tool manipulation at test-time without any object or task-specific training. We demonstrate that SimToolReal outperforms prior retargeting and fixed-grasp methods by 37% while matching the performance of specialist RL policies trained on specific target objects and tasks. Finally, we show that SimToolReal generalizes across a diverse set of everyday tools, achieving strong zero-shot performance over 120 real-world rollouts spanning 24 tasks, 12 object instances, and 6 tool categories.

Tool-use language agents are evaluated on benchmarks that assume clean inputs, unambiguous tool registries, and reliable APIs. Real deployments violate all these assumptions: user typos propagate into hallucinated tool names, a misconfigured request timeout can stall an agent indefinitely, and duplicate tool names across servers can freeze an SDK. We study these failures as a sim-to-real gap in the tool-use partially observable Markov decision process (POMDP), where deployment noise enters through the observation, action space, reward-relevant metadata, or transition dynamics. We introduce RobustBench-TC, a benchmark with 22 perturbation types organized by these four POMDP components, each grounded in a verified GitHub issue or documented tool-calling failure. Across 21 models from 1.5B to 32B parameters (including the closed-source o4-mini), the robustness profile is sharply uneven: observation perturbations reduce accuracy by less than 5%, while reward-relevant and transition perturbations reduce accuracy by roughly 40% and 30%, respectively; scale alone does not close these gaps. We then propose ToolRL-DR, a domain-randomization reinforcement learning (RL) recipe that trains a tool-use agent on perturbation-augmented trajectories spanning the three statically encodable POMDP components. On a 3B backbone, ToolRL-DR-Full retains roughly three-quarters of clean accuracy and reaches an aggregate perturbed accuracy comparable to open-source 14B function-calling baselines while substantially narrowing the gap to o4-mini. It closes approximately 27% of the Transition gap despite never seeing transition perturbations in training, suggesting that RL on adversarial static tool-use inputs induces a more persistent retry policy that transfers to unseen runtime failures. The dataset, code and benchmark leaderboard are publicly available.

Enabling large language models to utilize real-world tools effectively is crucial for achieving embodied intelligence. Existing approaches to tool learning have either primarily relied on extremely large language models, such as GPT-4, to attain generalized tool-use abilities in a zero-shot manner, or utilized supervised learning to train limited scopes of tools on compact models. However, it remains uncertain whether smaller language models can achieve generalized tool-use abilities without tool-specific training. To address this question, this paper introduces ToolAlpaca, a novel framework designed to automatically generate a diverse tool-use corpus and learn generalized tool-use abilities on compact language models with minimal human intervention. Specifically, ToolAlpaca first automatically creates a highly diversified tool-use corpus by building a multi-agent simulation environment. The corpus contains 3938 tool-use instances from more than 400 real-world tool APIs spanning 50 distinct categories. Subsequently, the constructed corpus is employed to fine-tune compact language models, resulting in two models, namely ToolAlpaca-7B and ToolAlpaca-13B, respectively. Finally, we evaluate the ability of these models to utilize previously unseen tools without specific training. Experimental results demonstrate that ToolAlpaca achieves effective generalized tool-use capabilities comparable to those of extremely large language models like GPT-3.5, demonstrating that learning generalized tool-use ability is feasible for compact language models.

Autonomous 6G network management requires agents that can execute tools, observe the resulting state changes, and adapt their decisions accordingly. Existing benchmarks based on static questions or scripted episode replay, however, do not support such closed-loop interaction, limiting agents to passive evaluation without the ability to learn from environmental feedback. This paper presents 6GAgentGym to provide closed-loop capability. The framework provides an interactive environment with 42 typed tools whose effect classification distinguishes read-only observation from state-mutating configuration, backed by a learned Experiment Model calibrated on NS-3 simulation data. 6G-Forge bootstraps closed-loop training trajectories from NS-3 seeds via iterative Self-Instruct generation with execution verification against the Experiment Model. Supervised fine-tuning on the resulting corpus followed by reinforcement learning with online closed-loop interaction enables an 8B open-source model to achieve comparable overall success rate to GPT-5 on the accompanying 6GAgentBench, with stronger performance on long-horizon tasks. Together, these components provide a viable path toward autonomous, closed-loop network management.

As robotic hardware and learning methods advance, humanoids need tools to perform tasks beyond their inherent physical limits. Successful tool use requires selecting a suitable tool and coordinating manipulation and, when needed, locomotion to complete the task. Existing benchmarks do not jointly evaluate these capabilities on a humanoid. We introduce HumanoidToolBench, an 18-task benchmark spanning three scenarios, three execution levels, and two tool-set modes, together with ToolBook, a dataset of 3.1k demonstrations collected in simulation and on a real Unitree G1. Evaluation of seven policies in simulation and three on the real robot reveals substantial gaps between selecting a suitable tool and completing the task. Focused GR00T N1.7 probes show reduced selection accuracy on unseen tools and continued task execution under unrelated instructions. Code and data are available at https://snu-pi.github.io/HumanoidToolBench/.

Tool use is a hallmark of advanced intelligence, exemplified in both animal behavior and robotic capabilities. This paper investigates the feasibility of imbuing robots with the ability to creatively use tools in tasks that involve implicit physical constraints and long-term planning. Leveraging Large Language Models (LLMs), we develop RoboTool, a system that accepts natural language instructions and outputs executable code for controlling robots in both simulated and real-world environments. RoboTool incorporates four pivotal components: (i) an "Analyzer" that interprets natural language to discern key task-related concepts, (ii) a "Planner" that generates comprehensive strategies based on the language input and key concepts, (iii) a "Calculator" that computes parameters for each skill, and (iv) a "Coder" that translates these plans into executable Python code. Our results show that RoboTool can not only comprehend explicit or implicit physical constraints and environmental factors but also demonstrate creative tool use. Unlike traditional Task and Motion Planning (TAMP) methods that rely on explicit optimization, our LLM-based system offers a more flexible, efficient, and user-friendly solution for complex robotics tasks. Through extensive experiments, we validate that RoboTool is proficient in handling tasks that would otherwise be infeasible without the creative use of tools, thereby expanding the capabilities of robotic systems. Demos are available on our project page: https://creative-robotool.github.io/.

LLM agents increasingly operate in large tool ecosystems, where real-world tasks require discovering relevant tools, inferring implicit sub-goals, and adapting to dynamic environments over long horizons. However, existing benchmarks rarely evaluate planning under retrieval-limited tool visibility. To address this gap, we introduce PlanBench-XL, an interactive benchmark of 327 retail tasks over 1,665 tools that tests whether agents can iteratively retrieve usable tools, invoke them to uncover intermediate evidence for subsequent calls toward the final goal. PlanBench-XL further features an optional blocking mechanism that simulates real-world unpredictability through missing, failing, or distracting tool functions, forcing agents to detect disrupted paths and adapt at runtime. Experiments on ten leading LLMs show that massive-tool planning remains challenging: while GPT-5.4 achieves 51.90% accuracy in block-free settings, it collapses to 11.36% under the most severe blocking condition. Further analysis shows that agents are especially vulnerable when failures lack explicit error signals or when recovery requires longer alternative tool-use paths. These results establish PlanBench-XL as a testbed for diagnosing agentic planning failures and highlight the need for robust adaptive planning in long-horizon tasks with large, imperfect tool environments.

With the recent rapid advancement of Agentic Intelligence, agentic tool use in LLMs has become increasingly important. During multi-turn interactions between agents and users, the dynamic, uncertain, and stochastic nature of user demands poses significant challenges to the agent's tool invocation capabilities. Agents are no longer expected to simply call tools to deliver a result; rather, they must iteratively refine their understanding of user needs through communication while simultaneously invoking tools to resolve user queries. Existing reinforcement learning (RL) approaches for tool use lack the integration of genuinely dynamic users during the RL training process. To bridge this gap, we introduce MUA-RL (Multi-turn User-interacting Agent Reinforcement Learning for agentic tool use), a novel reinforcement learning framework that, for the first time in the field of agentic tool use, integrates LLM-simulated users into the reinforcement learning loop. MUA-RL aims to enable autonomous learning of models to communicate with users efficiently and use various tools to solve practical problems in dynamic multi-turn interactions. Evaluations are done on several multi-turn tool-using benchmarks (see Figure 1). Specifically, MUA-RL-32B achieves 67.3 on TAU2 Retail, 45.4 on TAU2 Airline, 28.3 on TAU2 Telecom, 28.4 on BFCL-V3 Multi Turn, and 82.5 on ACEBench Agent -- outperforming or matching the performance of larger open-source models such as DeepSeek-V3-0324 and Qwen3-235B-A22B in non-thinking settings.

Tools are essential for large language models (LLMs) to acquire up-to-date information and take consequential actions in external environments. Existing work on tool-augmented LLMs primarily focuses on the broad coverage of tools and the flexibility of adding new tools. However, a critical aspect that has surprisingly been understudied is simply how accurately an LLM uses tools for which it has been trained. We find that existing LLMs, including GPT-4 and open-source LLMs specifically fine-tuned for tool use, only reach a correctness rate in the range of 30% to 60%, far from reliable use in practice. We propose a biologically inspired method for tool-augmented LLMs, simulated trial and error (STE), that orchestrates three key mechanisms for successful tool use behaviors in the biological system: trial and error, imagination, and memory. Specifically, STE leverages an LLM's 'imagination' to simulate plausible scenarios for using a tool, after which the LLM interacts with the tool to learn from its execution feedback. Both short-term and long-term memory are employed to improve the depth and breadth of the exploration, respectively. Comprehensive experiments on ToolBench show that STE substantially improves tool learning for LLMs under both in-context learning and fine-tuning settings, bringing a boost of 46.7% to Mistral-Instruct-7B and enabling it to outperform GPT-4. We also show effective continual learning of tools via a simple experience replay strategy.

Large Language Models (LLMs) are increasingly serving as autonomous agents, and their utilization of external tools via the Model Context Protocol (MCP) is considered a future trend. Current MCP evaluation sets suffer from issues such as reliance on external MCP services and a lack of difficulty awareness. To address these limitations, we propose MCPAgentBench, a benchmark based on real-world MCP definitions designed to evaluate the tool-use capabilities of agents. We construct a dataset containing authentic tasks and simulated MCP tools. The evaluation employs a dynamic sandbox environment that presents agents with candidate tool lists containing distractors, thereby testing their tool selection and discrimination abilities. Furthermore, we introduce comprehensive metrics to measure both task completion rates and execution efficiency. Experiments conducted on various latest mainstream Large Language Models reveal significant performance differences in handling complex, multi-step tool invocations. All code is open-source at Github.

Machine learning-based interatomic potentials and force fields depend critically on accurate atomic structures, yet such data are scarce due to the limited availability of experimentally resolved crystals. Although atomic-resolution electron microscopy offers a potential source of structural data, converting these images into simulation-ready formats remains labor-intensive and error-prone, creating a bottleneck for model training and validation. We introduce AutoMat, an end-to-end, agent-assisted pipeline that automatically transforms scanning transmission electron microscopy (STEM) images into atomic crystal structures and predicts their physical properties. AutoMat combines pattern-adaptive denoising, physics-guided template retrieval, symmetry-aware atomic reconstruction, fast relaxation and property prediction via MatterSim, and coordinated orchestration across all stages. We propose the first dedicated STEM2Mat-Bench for this task and evaluate performance using lattice RMSD, formation energy MAE, and structure-matching success rate. By orchestrating external tool calls, AutoMat enables a text-only LLM to outperform vision-language models in this domain, achieving closed-loop reasoning throughout the pipeline. In large-scale experiments over 450 structure samples, AutoMat substantially outperforms existing multimodal large language models and tools. These results validate both AutoMat and STEM2Mat-Bench, marking a key step toward bridging microscopy and atomistic simulation in materials science.The code and dataset are publicly available at https://github.com/yyt-2378/AutoMat and https://huggingface.co/datasets/yaotianvector/STEM2Mat.

Large Language Models are being increasingly deployed as the decision-making core of autonomous agents capable of effecting change in external environments. Yet, in conversational benchmarks, which simulate real-world customer-centric issue resolution scenarios, these agents frequently fail due to the cascading effects of incorrect decision-making. These challenges are particularly pronounced for open-source LLMs with smaller parameter sizes, limited context windows, and constrained inference budgets, which contribute to increased error accumulation in agentic settings. To tackle these challenges, we present the Failure-Aware Meta-Agentic (FAMA) framework. FAMA operates in two stages: first, it analyzes failure trajectories from baseline agents to identify the most prevalent errors; second, it employs an orchestration mechanism that activates a minimal subset of specialized agents tailored to address these failures by injecting a targeted context for the tool-use agent before the decision-making step. Experiments across open-source LLMs demonstrate performance gains up to 27% across evaluation modes over standard baselines. These results highlight that targeted curation of context through specialized agents to address common failures is a valuable design principle for building reliable, multi-turn tool-use LLM agents that simulate real-world conversational scenarios.

Large Language Model (LLM) agents have developed rapidly in recent years to solve complex real-world problems using external tools. However, the scarcity of high-quality trajectories still hinders the development of stronger LLM agents. Most existing works on multi-turn dialogue synthesis validate correctness only at the trajectory level, which may overlook turn-level errors that can propagate during training and degrade model performance. To address these limitations, we introduce ToolMind, a large-scale, high-quality tool-agentic dataset with 160k synthetic data instances generated using over 20k tools and 200k augmented open-source data instances. Our data synthesis pipeline first constructs a function graph based on parameter correlations and then uses a multi-agent framework to simulate realistic user-assistant-tool interactions. Beyond trajectory-level validation, we employ fine-grained turn-level filtering to remove erroneous or suboptimal steps, ensuring that only high-quality reasoning traces are retained. This approach mitigates error amplification during training while preserving self-corrective reasoning signals essential for robust tool-use learning. Models fine-tuned on ToolMind show significant improvements over baselines on several benchmarks.

Current evaluations of Large Language Model (LLM) agents primarily emphasize task completion, often overlooking resource efficiency and adaptability. This neglects a crucial capability: agents' ability to devise and adjust cost-optimal plans in response to changing environments. To bridge this gap, we introduce CostBench, a scalable, cost-centric benchmark designed to evaluate agents' economic reasoning and replanning abilities. Situated in the travel-planning domain, CostBench comprises tasks solvable via multiple sequences of atomic and composite tools with diverse, customizable costs. It also supports four types of dynamic blocking events, such as tool failures and cost changes, to simulate real-world unpredictability and necessitate agents to adapt in real time. Evaluating leading open-sourced and proprietary models on CostBench reveals a substantial gap in cost-aware planning: agents frequently fail to identify cost-optimal solutions in static settings, with even GPT-5 achieving less than 75% exact match rate on the hardest tasks, and performance further dropping by around 40% under dynamic conditions. By diagnosing these weaknesses, CostBench lays the groundwork for developing future agents that are both economically rational and robust.

Voice assistants increasingly rely on Speech Language Models (SpeechLMs) to interpret spoken queries and execute complex tasks, yet existing benchmarks lack domain breadth, acoustic diversity, and compositional reasoning complexity to evaluate tool-calling performance. We introduce Audio2Tool, a large-scale dataset comprising approximately 30,000 queries designed to assess tool-calling capabilities of SpeechLMs across three primary domains: Smart Car, Smart Home, and Wearables. Our benchmark features a multi-tier complexity hierarchy, ranging from simple direct commands to complex multi-intent and needle-in-a-haystack extraction to isolate distinct failure modes. To ensure realism, we employ zero-shot voice cloning text-to-speech synthesis and diverse noise profiles to simulate in-the-wild conditions. Evaluations of state-of-the-art SpeechLMs and ASR-LLM pipelines show strong performance on simple commands but significant degradation under compositional and acoustic challenges. Code and dataset are publicly available on the project page: https://audio2tool.github.io/.

Tool calling allows large language models (LLMs) to interact with external systems like APIs, enabling applications in customer support, data analysis, and dynamic content generation. While recent benchmarks have advanced tool-use research, they suffer from key limitations, including reliance on simulated or restricted APIs, limited reproducibility, and a lack of cultural and geographic diversity. To address these gaps, we introduce International Tool Calling (ITC), a large-scale, multilingual benchmark designed for realistic, globally distributed tool-calling scenarios. ITC includes 3,571 real APIs and 17,540 tool calling tasks across 20 categories and 40 countries. Experiments reveal substantial performance gaps between open- and closed-source LLMs, while fine-tuning on ITC yields significant improvements, particularly for non-English queries, enhancing cross-lingual generalization, reasoning consistency, and robustness to out-of-domain tools. ITC provides a valuable benchmark for advancing LLM robustness and performance in complex, multi-tool, and international scenarios. Dataset: https://anonymous.4open.science/r/International-Tool-Calling-ITC-dataset-FAF4/.

With the growing demand for intelligent in-vehicle experiences, vehicle-based agents are evolving from simple assistants to long-term companions. This evolution requires agents to continuously model multi-user preferences and make reliable decisions in the face of inter-user preference conflicts and changing habits over time. However, existing benchmarks are largely limited to single-user, static question-answer settings, failing to capture the temporal evolution of preferences and the multi-user, tool-interactive nature of real vehicle environments. To address this gap, we introduce VehicleMemBench, a multi-user long-context memory benchmark built on an executable in-vehicle simulation environment. The benchmark evaluates tool use and memory by comparing the post-action environment state with a predefined target state, enabling objective and reproducible evaluation without LLM-based or human scoring. VehicleMemBench includes 23 tool modules, and each sample contains over 80 historical memory events. Experiments show that powerful models perform well on direct instruction tasks but struggle in scenarios involving memory evolution, particularly when user preferences change dynamically. Even advanced memory systems struggle to handle domain-specific memory requirements in this environment. These findings highlight the need for more robust and specialized memory management mechanisms to support long-term adaptive decision-making in real-world in-vehicle systems. To facilitate future research, we release the data and code.

Interactive tool-using agents must solve real-world tasks via multi-turn interaction with both humans and external environments, requiring dialogue state tracking, multi-step tool execution, while following complex instructions. Post-training such agents is challenging because synthesis for high-quality multi-turn tool-use data is difficult to scale, and reinforcement learning (RL) could face noisy signals caused by user simulation, leading to degraded training efficiency. We propose a unified framework that combines a self-evolving data agent with verifier-based RL. Our system, EigenData, is a hierarchical multi-agent engine that synthesizes tool-grounded dialogues together with executable per-instance checkers, and improves generation reliability via closed-loop self-evolving process that updates prompts and workflow. Building on the synthetic data, we develop an RL recipe that first fine-tunes the user model and then applies GRPO-style training with trajectory-level group-relative advantages and dynamic filtering, yielding consistent improvements beyond SFT. Evaluated on tau^2-bench, our best model reaches 73.0% pass^1 on Airline and 98.3% pass^1 on Telecom, matching or exceeding frontier models. Overall, our results suggest a scalable pathway for bootstrapping complex tool-using behaviors without expensive human annotation.

The Model Context Protocol (MCP) has emerged as a transformative standard for connecting large language models (LLMs) with external data sources and tools, and has been rapidly adopted across personal applications and development platforms. However, existing benchmarks predominantly focus on generic information-seeking tools and fail to capture the practical challenges posed by personal social applications, where tools interact with individual accounts or local databases. To bridge this critical gap, we introduce MCP-Persona, the first benchmark specifically designed for evaluating agent performance on real-world, personalized MCP tools. MCP-Persona encompasses a diverse set of widely-used applications, ranging from social media platforms like Reddit and Xiaohongshu (Rednote) to enterprise collaboration suites such as Lark (Feishu) and Slack. Our extensive experiments on various state-of-the-art (SOTA) agents demonstrate their significant struggles with personalized tool use, thereby highlighting the benchmark's crucial role in identifying and addressing these limitations. MCP-Persona is publicly available at https://github.com/wwh0411/MCP-Persona}{https://github.com/wwh0411/MCP-Persona.

This paper proposes AI Tour Meeting, a group travel planning framework powered by multiple Large Language Model (LLM)-based agents. The agents are instantiated with distinct personas and collaboratively seek an itinerary that satisfies their constraints and preferences through natural language discussion. The framework enables easy and flexible orchestration of such discussions by providing interfaces for configuring agent personas, discussion workflows, monitoring, and LLM deployment. Its primary use case is a simulation tool for analyzing the behavior of multiple LLM agents during tour planning discussions. This paper demonstrates the utility of the framework by presenting system validation and several analytical results obtained by the framework.

Problem: Effective patient-centered communication is a core competency for physicians. However, both seasoned providers and medical trainees report decreased confidence in leading conversations on sensitive topics such as goals of care or end-of-life discussions. The significant administrative burden and the resources required to provide dedicated training in leading difficult conversations has been a long-standing problem in medical education. Approach: In this work, we present a novel educational tool designed to facilitate interactive, real-time simulations of difficult conversations in a video-based format through the use of multimodal generative artificial intelligence (AI). Leveraging recent advances in language modeling, computer vision, and generative audio, this tool creates realistic, interactive scenarios with avatars, or "synthetic patients." These synthetic patients interact with users throughout various stages of medical care using a custom-built video chat application, offering learners the chance to practice conversations with patients from diverse belief systems, personalities, and ethnic backgrounds. Outcomes: While the development of this platform demanded substantial upfront investment in labor, it offers a highly-realistic simulation experience with minimal financial investment. For medical trainees, this educational tool can be implemented within programs to simulate patient-provider conversations and can be incorporated into existing palliative care curriculum to provide a scalable, high-fidelity simulation environment for mastering difficult conversations. Next Steps: Future developments will explore enhancing the authenticity of these encounters by working with patients to incorporate their histories and personalities, as well as employing the use of AI-generated evaluations to offer immediate, constructive feedback to learners post-simulation.

Travel planning is a realistic task for evaluating the planning and tool-use abilities of LLM agents. However, existing benchmarks typically assume only a single user, thereby avoiding one of the most challenging aspects of real-world scenarios: an agent's ability to identify and resolve conflicts among multiple users. To address this gap, we introduce GroupTravelBench, the first benchmark for multi-user, multi-turn travel planning. Based on real user profiles, POI data, and ticket price data, we synthesize 650 tasks and divide them into three difficulty levels. Beyond standard abilities in single-user itinerary planning, such as multi-step reasoning and tool use, our benchmark further evaluates three key capabilities required for travel agents: (i) elicitation -- proactively engaging in multi-turn dialogue to gather preferences from each user; (ii) coordination -- resolving conflicts among users through compromise or subgrouping strategies; and (iii) planning -- searching for travel plans that maximize overall group utility while maintaining fairness and feasibility. To simulate real-world conversational itinerary planning while enabling reliable tool use and offline evaluation, we build an interactive sandbox environment with cached real-world tool data. We evaluate a wide range of LLMs and find that even frontier models still show substantial weaknesses in preference coverage and group fairness. GroupTravelBench provides a practical and reproducible benchmark for advancing research on LLM agents for real-world travel planning.

Large reasoning models have demonstrated strong problem-solving abilities, yet real-world tasks often require external tools and long-horizon interactions. Existing agent frameworks typically follow predefined workflows, which limit autonomous and global task completion. In this paper, we introduce DeepAgent, an end-to-end deep reasoning agent that performs autonomous thinking, tool discovery, and action execution within a single, coherent reasoning process. To address the challenges of long-horizon interactions, particularly the context length explosion from multiple tool calls and the accumulation of interaction history, we introduce an autonomous memory folding mechanism that compresses past interactions into structured episodic, working, and tool memories, reducing error accumulation while preserving critical information. To teach general-purpose tool use efficiently and stably, we develop an end-to-end reinforcement learning strategy, namely ToolPO, that leverages LLM-simulated APIs and applies tool-call advantage attribution to assign fine-grained credit to the tool invocation tokens. Extensive experiments on eight benchmarks, including general tool-use tasks (ToolBench, API-Bank, TMDB, Spotify, ToolHop) and downstream applications (ALFWorld, WebShop, GAIA, HLE), demonstrate that DeepAgent consistently outperforms baselines across both labeled-tool and open-set tool retrieval scenarios. This work takes a step toward more general and capable agents for real-world applications. The code and demo are available at https://github.com/RUC-NLPIR/DeepAgent.

Evaluating LLM agents for scientific tasks has focused on token costs while ignoring tool-use costs like simulation time and experimental resources. As a result, metrics like pass@k become impractical under realistic budget constraints. To address this gap, we introduce SimulCost, the first benchmark targeting cost-sensitive parameter tuning in physics simulations. SimulCost compares LLM tuning cost-sensitive parameters against traditional scanning approach in both accuracy and computational cost, spanning 2,916 single-round (initial guess) and 1,900 multi-round (adjustment by trial-and-error) tasks across 12 simulators from fluid dynamics, solid mechanics, and plasma physics. Each simulator's cost is analytically defined and platform-independent. Frontier LLMs achieve 46--64% success rates in single-round mode, dropping to 35--54% under high accuracy requirements, rendering their initial guesses unreliable especially for high accuracy tasks. Multi-round mode improves rates to 71--80%, but LLMs are 1.5--2.5x slower than traditional scanning, making them uneconomical choices. We also investigate parameter group correlations for knowledge transfer potential, and the impact of in-context examples and reasoning effort, providing practical implications for deployment and fine-tuning. We open-source SimulCost as a static benchmark and extensible toolkit to facilitate research on improving cost-aware agentic designs for physics simulations, and for expanding new simulation environments. Code and data are available at https://github.com/Rose-STL-Lab/SimulCost-Bench.

Training general robotic policies from heterogeneous data for different tasks is a significant challenge. Existing robotic datasets vary in different modalities such as color, depth, tactile, and proprioceptive information, and collected in different domains such as simulation, real robots, and human videos. Current methods usually collect and pool all data from one domain to train a single policy to handle such heterogeneity in tasks and domains, which is prohibitively expensive and difficult. In this work, we present a flexible approach, dubbed Policy Composition, to combine information across such diverse modalities and domains for learning scene-level and task-level generalized manipulation skills, by composing different data distributions represented with diffusion models. Our method can use task-level composition for multi-task manipulation and be composed with analytic cost functions to adapt policy behaviors at inference time. We train our method on simulation, human, and real robot data and evaluate in tool-use tasks. The composed policy achieves robust and dexterous performance under varying scenes and tasks and outperforms baselines from a single data source in both simulation and real-world experiments. See https://liruiw.github.io/policycomp for more details .

System One models choose an agent's next action by scoring a supplied set of options in a single pass. This makes them fast and cheap, but when they choose wrongly there is nothing to inspect: did the model misread what the agent has seen, or read it correctly and still act wrongly? We answer behaviorally. On a frozen benchmark of agent decision states from simulated environments, customer-service policies, tool use, web navigation and coding, we pair every next-action question with factual probes about the same state, each answered independently. Across seventeen fast systems and a reasoning model, the answer is consistent: most wrong actions follow correct reading, and the more accurate a system, the more of its errors take this form. These errors are not noise; they gather on the same states across systems of every kind. Where the probed facts provably determine the action, models that read every fact still fail to combine them, and their own answers, composed by code, repair the failure. On real states, what is missing is often not a fact but the next sub-goal.

We introduce OpenMobile-2, a near-frontier mobile agent with fully open training environments and recipes. We make three key advances: (1) Diverse environments with simulated commercial apps: We build MobileGym++, featuring 35 realistic, functionally rich commercial-style apps with cross-app workflows, while preserving full controllability for reset and verification. Together with newly configured apps in Android emulators, this yields a diverse playground spanning over 110 apps. (2) Open training data at scale: Building on this foundation, we curate nearly 12K mobile interaction trajectories for supervised fine-tuning and the largest open collection of verifiable RL training data for mobile agents, comprising over 2K executable tasks with automatic rewards. (3) Hybrid GUI and app-native tool use: We explore an experimental mobile-use setting where apps expose selected functionalities as app-native tools alongside their GUIs, allowing agents to interleave GUI actions and tool calls within a task. We implement this setting in MobileGym++ with over 300 carefully scoped tools across 50+ apps. Additionally, we introduce MobileGym++ Bench for complex, long-horizon commercial mobile scenarios, supporting both GUI-only and hybrid GUI-tool evaluation on a shared task suite. OpenMobile-2 performs competitively across established benchmarks, including AndroidWorld (79.9) and MobileWorld (50.4), while showing promising transfer to real-device mobile use, nearly doubling SPA-Bench performance from 31.9 to 59.6. All resources are available at https://os-copilot.github.io/OpenMobile2-Home/.

Continual-learning agents are systems of models, harnesses, and memory operating over long multi-session horizons. Evaluating and training them requires interleaving tasks with agent-side events such as session stop and start, crons, and memory consolidation. Yet existing benchmarks and training frameworks schedule only the benchmark's own events, leaving each benchmark and agent pair to build a custom scheduling loop. We present SCLATE, an execution substrate where benchmarks and unmodified agents each add their events to one open event scheduler through an adapter. A hybrid simulated clock runs these events on a shared timeline, flowing in real time while the agent works and skipping idle gaps, which compresses a month-long scenario into hours. SCLATE also serves as a rollout engine that runs any agent's harness and memory unmodified, recording the tokens and log probabilities of every model call through an in-container proxy. We port seven benchmarks to SCLATE and compare ten unmodified harness and memory configurations head to head on ten models. The comparison shows that an added memory system does not reliably beat the harness's native memory and that models differ widely in how they use the same harness and memory. We then post-train Qwen3.5-4B through unmodified harnesses and memory systems. The model learns to use both, reading 6.8x fewer file lines with a 16.7-point higher SWE-bench Verified pass rate, and writing richer memory records, while its held-out MetaClaw accuracy rises by up to 11.8 points.

As Large Language Models (LLMs) evolve from static chatbots into autonomous agents capable of tool execution, the landscape of AI safety is shifting from content moderation to action security. However, existing red-teaming frameworks remain bifurcated: they either focus on rigid, script-based text attacks or lack the architectural modularity to simulate complex, multi-turn agentic exploitations. In this paper, we introduce AJAR (Adaptive Jailbreak Architecture for Red-teaming), a proof-of-concept framework designed to bridge this gap through Protocol-driven Cognitive Orchestration. Built upon the robust runtime of Petri, AJAR leverages the Model Context Protocol (MCP) to decouple adversarial logic from the execution loop, encapsulating state-of-the-art algorithms like X-Teaming as standardized, plug-and-play services. We validate the architectural feasibility of AJAR through a controlled qualitative case study, demonstrating its ability to perform stateful backtracking within a tool-use environment. Furthermore, our preliminary exploration of the "Agentic Gap" reveals a complex safety dynamic: while tool usage introduces new injection vectors via code execution, the cognitive load of parameter formatting can inadvertently disrupt persona-based attacks. AJAR is open-sourced to facilitate the standardized, environment-aware evaluation of this emerging attack surface. The code and data are available at https://github.com/douyipu/ajar.

Artificial Intelligence (AI) is being incorporated in several optimization, scheduling, orchestration as well as in native communication network functions. This paradigm shift results in increased energy consumption, however, quantifying the end-to-end energy consumption of adding intelligence to communication systems remains an open challenge since conventional energy consumption metrics focus on either communication, computation infrastructure, or model development. To address this, we propose a new metric, the Energy Cost of AI Lifecycle (eCAL) of an AI model in a system. eCAL captures the energy consumption throughout the development, deployment and utilization of an AI-model providing intelligence in a communication network by (i) analyzing the complexity of data collection and manipulation in individual components and (ii) deriving overall and per-bit energy consumption. We show that as a trained AI model is used more frequently for inference, its energy cost per inference decreases, since the fixed training energy is amortized over a growing number of inferences. For a simple case study we show that eCAL for 100 inferences is 2.73 times higher than for 1000 inferences. Additionally, we have developed a modular and extendable open-source simulation tool to enable researchers, practitioners, and engineers to calculate the end-to-end energy cost with various configurations and across various systems, ensuring adaptability to diverse use cases.

Iterative industrial design-simulation optimization is bottlenecked by the CAD-CAE semantic gap: translating simulation feedback into valid geometric edits under diverse, coupled constraints. To fill this gap, we propose COSMO-Agent (Closed-loop Optimization, Simulation, and Modeling Orchestration), a tool-augmented reinforcement learning (RL) framework that teaches LLMs to complete the closed-loop CAD-CAE process. Specifically, we cast CAD generation, CAE solving, result parsing, and geometry revision as an interactive RL environment, where an LLM learns to orchestrate external tools and revise parametric geometries until constraints are satisfied. To make this learning stable and industrially usable, we design a multi-constraint reward that jointly encourages feasibility, toolchain robustness, and structured output validity. In addition, we contribute an industry-aligned dataset that covers 25 component categories with executable CAD-CAE tasks to support realistic training and evaluation. Experiments show that COSMO-Agent training substantially improves small open-source LLMs for constraint-driven design, exceeding large open-source and strong closed-source models in feasibility, efficiency, and stability.

Existing benchmarks do not test language agents on their interaction with human users or ability to follow domain-specific rules, both of which are vital for deploying them in real world applications. We propose tau-bench, a benchmark emulating dynamic conversations between a user (simulated by language models) and a language agent provided with domain-specific API tools and policy guidelines. We employ an efficient and faithful evaluation process that compares the database state at the end of a conversation with the annotated goal state. We also propose a new metric (pass^k) to evaluate the reliability of agent behavior over multiple trials. Our experiments show that even state-of-the-art function calling agents (like gpt-4o) succeed on <50% of the tasks, and are quite inconsistent (pass^8 <25% in retail). Our findings point to the need for methods that can improve the ability of agents to act consistently and follow rules reliably.

Reinforcement learning (RL) has become a prevalent paradigm for training tool calling agents, which typically requires online interactive environments. Existing approaches either rely on training data with ground truth annotations or require advanced proprietary language models (LMs) to synthesize environments that keep fixed once created. In this work, we propose TRUSTEE, a cost-friendly method for training tool calling agents with dynamic environments fully simulated by free open-source LMs that can be as small as 8B, including task generation, user simulation, tool simulation and trajectory evaluation, paired with an adaptive curriculum learning mechanism that controls task difficulty during training. Our empirical results show that TRUSTEE outperforms baselines which require extra external resources in most cases. These confirm that, with a sufficiently sophisticated design, even simulated environments with a local 8B LM as the backbone could set a strong baseline for tool learning. We hope our proposed paradigm could democratize tool learning and inspire future research on environment scaling with limited resources.

To realize the full potential of quantum computers, we must mitigate qubit errors by developing noise-aware algorithms, compilers, and architectures. Thus, simulating quantum programs on high-performance computing (HPC) systems with different noise models is a de facto tool researchers use. Unfortunately, noisy simulators iteratively execute a similar circuit for thousands of trials, thereby incurring significant performance overheads. To address this, we propose a noisy simulation technique called Tree-Based Quantum Circuit Simulation (TQSim). TQSim exploits the reusability of intermediate results during the noisy simulation, reducing computation. TQSim dynamically partitions a circuit into several subcircuits. It then reuses the intermediate results from these subcircuits during computation. Compared to a noisy Qulacs-based baseline simulator, TQSim achieves a speedup of up to 3.89x for noisy simulations. TQSim is designed to be efficient with multi-node setups while also maintaining tight fidelity bounds.

While self-supervised pretraining has reduced vision systems' reliance on synthetic data, simulation remains an indispensable tool for closed-loop optimization and rigorous out-of-distribution (OOD) evaluation. However, modern simulation platforms often present steep technical barriers, requiring extensive expertise in computer graphics and game development. In this work, we present LychSim, a highly controllable and interactive simulation framework built upon Unreal Engine 5 to bridge this gap. LychSim is built around three key designs: (1) a streamlined Python API that abstracts away underlying engine complexities; (2) a procedural data pipeline capable of generating diverse, high-fidelity environments with varying out-of-distribution (OOD) visual challenges, paired with rich 2D and 3D ground truths; and (3) a native integration of the Model Context Protocol (MCP) that transforms the simulator into a dynamic, closed-loop playground for reasoning agentic LLMs. We further annotate scene-level procedural rules and object-level pose alignments to enable semantically aligned 3D ground truths and automated scene modification. We demonstrate LychSim's capability across multiple downstream applications, including serving as a synthetic data engine, powering reinforcement learning-based adversarial examiners, and facilitating interactive, language-driven scene layout generation. To benefit the broader vision community, LychSim will be made publicly available, including full source code and various data annotations.

Generative models trained on internet data have revolutionized how text, image, and video content can be created. Perhaps the next milestone for generative models is to simulate realistic experience in response to actions taken by humans, robots, and other interactive agents. Applications of a real-world simulator range from controllable content creation in games and movies, to training embodied agents purely in simulation that can be directly deployed in the real world. We explore the possibility of learning a universal simulator (UniSim) of real-world interaction through generative modeling. We first make the important observation that natural datasets available for learning a real-world simulator are often rich along different axes (e.g., abundant objects in image data, densely sampled actions in robotics data, and diverse movements in navigation data). With careful orchestration of diverse datasets, each providing a different aspect of the overall experience, UniSim can emulate how humans and agents interact with the world by simulating the visual outcome of both high-level instructions such as "open the drawer" and low-level controls such as "move by x, y" from otherwise static scenes and objects. There are numerous use cases for such a real-world simulator. As an example, we use UniSim to train both high-level vision-language planners and low-level reinforcement learning policies, each of which exhibit zero-shot real-world transfer after training purely in a learned real-world simulator. We also show that other types of intelligence such as video captioning models can benefit from training with simulated experience in UniSim, opening up even wider applications. Video demos can be found at https://universal-simulator.github.io.

Generative artificial intelligence (AI) systems open new possibilities for experimentation in literary studies via controlled, grounded, large-scale, low-cost simulations of cultural production. Current systems have not yet been shown to produce high-quality, book-length narrative texts that reliably reflect arbitrarily specified cultural constraints or stylistic features. But there exists substantial relevant research on each of the components required for literary-historical simulation. These include the use and validation of AI systems as proxies for differentiable human populations; the narrative and stylistic properties of AI-generated texts; the stability and coherence of multiagent, multiturn AI simulations of human actors; and technical methods through which to alter in predictable ways the knowledge and behavior of generative systems. Together, these areas could provide a starting point for more ambitious AI-based modeling of cultural systems of literary production. We describe the possibilities and challenges of simulation-based experiments in literary studies, summarize the current state of the art in relevant fields, and explain key technical aspects of the work. To provide an example directly relevant to literary scholars, we present the results of experiments on literary text generation, including comparisons to high-status, human-authored novels. Our results include the first demonstration of (limited) in-distribution outputs by AI models in this domain. We conclude with a description of future work on full counterfactual literary-historical simulations using AI.

Navigation and manipulation are core capabilities in Embodied AI, yet training agents with these capabilities in the real world faces high costs and time complexity. Therefore, sim-to-real transfer has emerged as a key approach, yet the sim-to-real gap persists. This survey examines how physics simulators address this gap by analyzing their properties overlooked in previous surveys. We also analyze their features for navigation and manipulation tasks, along with hardware requirements. Additionally, we offer a resource with benchmark datasets, metrics, simulation platforms, and cutting-edge methods-such as world models and geometric equivariance-to help researchers select suitable tools while accounting for hardware constraints.

Significant focus has been placed on integrating large language models (LLMs) with various tools in developing general-purpose agents. This poses a challenge to LLMs' tool-use capabilities. However, there are evident gaps between existing tool-use evaluations and real-world scenarios. Current evaluations often use AI-generated queries, single-step tasks, dummy tools, and text-only interactions, failing to reveal the agents' real-world problem-solving abilities effectively. To address this, we propose GTA, a benchmark for General Tool Agents, featuring three main aspects: (i) Real user queries: human-written queries with simple real-world objectives but implicit tool-use, requiring the LLM to reason the suitable tools and plan the solution steps. (ii) Real deployed tools: an evaluation platform equipped with tools across perception, operation, logic, and creativity categories to evaluate the agents' actual task execution performance. (iii) Real multimodal inputs: authentic image files, such as spatial scenes, web page screenshots, tables, code snippets, and printed/handwritten materials, used as the query contexts to align with real-world scenarios closely. We design 229 real-world tasks and executable tool chains to evaluate mainstream LLMs. Our findings show that real-world user queries are challenging for existing LLMs, with GPT-4 completing less than 50% of the tasks and most LLMs achieving below 25%. This evaluation reveals the bottlenecks in the tool-use capabilities of current LLMs in real-world scenarios, which provides future direction for advancing general-purpose tool agents. The code and dataset are available at https://github.com/open-compass/GTA.

Recent advances in large language models (LLMs) have opened new avenues for applying multi-agent systems in very large-scale simulations. However, there remain several challenges when conducting multi-agent simulations with existing platforms, such as limited scalability and low efficiency, unsatisfied agent diversity, and effort-intensive management processes. To address these challenges, we develop several new features and components for AgentScope, a user-friendly multi-agent platform, enhancing its convenience and flexibility for supporting very large-scale multi-agent simulations. Specifically, we propose an actor-based distributed mechanism as the underlying technological infrastructure towards great scalability and high efficiency, and provide flexible environment support for simulating various real-world scenarios, which enables parallel execution of multiple agents, centralized workflow orchestration, and both inter-agent and agent-environment interactions among agents. Moreover, we integrate an easy-to-use configurable tool and an automatic background generation pipeline in AgentScope, simplifying the process of creating agents with diverse yet detailed background settings. Last but not least, we provide a web-based interface for conveniently monitoring and managing a large number of agents that might deploy across multiple devices. We conduct a comprehensive simulation to demonstrate the effectiveness of the proposed enhancements in AgentScope, and provide detailed observations and discussions to highlight the great potential of applying multi-agent systems in large-scale simulations. The source code is released on GitHub at https://github.com/modelscope/agentscope to inspire further research and development in large-scale multi-agent simulations.

Tool-using LLM agents still struggle in open-world settings with large tool pools, long-horizon objectives, wild constraints, and unreliable tool states. For scalable and realistic training and testing, we introduce an open-world tool-using environment, built on 5,571 format unified tools across 204 commonly used apps. It includes a task creation engine that synthesizes long-horizon, multi-tool workflows with wild constraints, and a state controller that injects interruptions and failures to stress-test robustness. On top of this environment, we develop a tool select-then-execute agent framework with a planner-actor decomposition to separate deliberate reasoning and self-correction from step-wise execution. Comprehensive evaluation of state-of-the-art LLMs reveals the misalignment between tool planning and execution abilities, the constraint following weakness of existing LLMs, and DeepSeek-v3.2's strongest robustness. Finally, we collect 1,170 trajectories from our environment to fine-tune LLMs, achieving superior performance to baselines using 119k samples, indicating the environment's value as both a realistic benchmark and a data engine for tool-using agents. Our code and data will be publicly released.

Real-world embodied tasks, from everyday activities to professional procedures, require agents to act under physical constraints while tracking evolving object and task states. Tool use sits at the heart of such tasks, as many everyday and professional activities are tool-mediated. Understanding them requires reasoning about affordances, hand-tool-object geometry, procedural progress, and causal effects on target objects. Yet despite strong performance on perception-oriented video tasks such as captioning and general video QA, current multimodal video models remain limited in this form of tool-centric embodied reasoning. Progress in this direction has been limited by the lack of real-world egocentric data and diagnostic benchmarks. To address this gap, we introduce EgoTools, the first comprehensive suite for egocentric tool-use understanding. It consists of two complementary components: EgoTools-Data, a large-scale corpus of 100 hours of tool-centric egocentric recordings with synchronized audio, dense captions, reasoning-heavy narrations, and supplementary 3D information; and EgoTools-Bench, a diagnostic benchmark of 1,000 QA pairs across four tracks that cover tool-use understanding from perception and geometry to procedure and causal reasoning. Experimental results show that current models still struggle to ground tool use in visual evidence: Gemini-3.1-Pro achieves 66.9% overall accuracy but only 51.7% on Perception & Grounding. Beyond evaluation, we validate EgoTools-Data as a training resource. On the full 1,000-question benchmark, full supervised fine-tuning improves Qwen3-VL-8B-Instruct from 50.0% to 60.9%, under strict source-video separation. Together, these results establish EgoTools as a unified resource for both training and diagnostic evaluation of real-world egocentric tool-use understanding.

AI agents increasingly rely on external tools to solve complex, long-horizon tasks. Advancing such agents requires reproducible evaluation and large-scale training in controllable, diverse, and realistic tool-use environments. However, real-world APIs are limited in availability, domain coverage, and stability, often requiring access keys and imposing rate limits, which render them impractical for stable evaluation or scalable training. To address these challenges, we introduce SynthTools, a flexible and scalable framework for generating synthetic tool ecosystems. Our framework consists of three core components: Tool Generation for automatic and scalable creation of diverse tools, Tool Simulation to emulate realistic tool behaviors, and Tool Audit to ensure correctness and consistency of tool simulation. To illustrate its scalability, we show that SynthTools can readily produce toolsets that span twice as many domains and twice as many tools per domain as prior work. Furthermore, the tool simulation and tool audit components demonstrate strong reliability, achieving 94% and 99% accuracy respectively. Finally, we construct downstream tasks from the generated tools that even state-of-the-art models struggle to complete. By enabling scalable, diverse, and reliable tool ecosystems, SynthTools provides a practical path toward large-scale training and stable evaluation of tool-use agents. Our code is available at https://github.com/namkoong-lab/SynthTools.

Tools serve as pivotal interfaces that enable humans to understand and reshape the world. With the advent of foundational models, AI systems can utilize tools to expand their capabilities and interact with the world. Existing tool learning methodologies, encompassing supervised fine-tuning and prompt engineering approaches, often induce language models to utilize tools indiscriminately, as complex problems often exceed their own competencies. However, introducing tools for simple tasks, which the models themselves can readily resolve, can inadvertently propagate errors rather than enhance performance. This leads to the research question: can we teach language models when and how to use tools? To meet this need, we propose Tool leaRning wIth exeCution fEedback (TRICE), a two-stage end-to-end framework that enables the model to continually learn through feedback derived from tool execution, thereby learning when and how to use tools effectively. Experimental results, backed by further analysis, show that TRICE can make the language model to selectively use tools by decreasing the model's dependency on tools while enhancing the performance. Code and datasets will be available in https://github.com/zjunlp/trice.

Humans possess an extraordinary ability to create and utilize tools, allowing them to overcome physical limitations and explore new frontiers. With the advent of foundation models, AI systems have the potential to be equally adept in tool use as humans. This paradigm, i.e., tool learning with foundation models, combines the strengths of specialized tools and foundation models to achieve enhanced accuracy, efficiency, and automation in problem-solving. Despite its immense potential, there is still a lack of a comprehensive understanding of key challenges, opportunities, and future endeavors in this field. To this end, we present a systematic investigation of tool learning in this paper. We first introduce the background of tool learning, including its cognitive origins, the paradigm shift of foundation models, and the complementary roles of tools and models. Then we recapitulate existing tool learning research into tool-augmented and tool-oriented learning. We formulate a general tool learning framework: starting from understanding the user instruction, models should learn to decompose a complex task into several subtasks, dynamically adjust their plan through reasoning, and effectively conquer each sub-task by selecting appropriate tools. We also discuss how to train models for improved tool-use capabilities and facilitate the generalization in tool learning. Considering the lack of a systematic tool learning evaluation in prior works, we experiment with 18 representative tools and show the potential of current foundation models in skillfully utilizing tools. Finally, we discuss several open problems that require further investigation for tool learning. In general, we hope this paper could inspire future research in integrating tools with foundation models.

Agentic AI architectures augment LLMs with external tools, unlocking strong capabilities but potentially incurring substantial costs. Moreover, tool use is not always beneficial: redundant or low-utility calls can even harm task performance. Effective tool use, therefore, hinges on a core LLM decision: whether to call or not call a tool when performing a task. We introduce a principled framework inspired by decision-making theory to understand tool-use decisions along three key factors: necessity, utility, and affordability. Our analysis combines two complementary lenses: a normative perspective that infers true need and utility for optimal tool calls, and a descriptive perspective that infers the model's self-perceived need and utility from their observed behaviors. We evaluate six open models and a proprietary OpenAI model across native and customized harnesses, two tools, and six tasks. Models' perceived need and utility remain misaligned with their true values, particularly under budget constraints. This misalignment produces both costly overuse and performance-degrading calls. To improve the tool decisions, we train lightweight latent estimators of need (LNEs) from model hidden states. LNEs generally predict true need more accurately than model self-reports and improve budgeted tool allocation across model scales and tool types. Code and dataset available at https://github.com/QinyuanWu0710/ToCall_or_NotToCall.

Large language models (LLMs) are increasingly used in interactive applications, and human evaluation remains the gold standard for assessing their performance in multi-turn conversations. Since human studies are costly, time-consuming, and hard to reproduce, recent work explores using LLMs to simulate users for automatic assistant evaluation. However, there is no benchmark or systematic study to evaluate whether these simulated users are reliable stand-ins for real users. To address this, we introduce SimulatorArena, a benchmark of 909 annotated human-LLM conversations on two interactive tasks -- math tutoring and document creation. SimulatorArena evaluates simulators based on how closely their messages match human behavior and how well their assistant ratings align with human judgments. Experiments on various simulator methods show that simulators conditioned on user profiles, capturing traits like background and message styles, align closely with human judgments. They reach Spearman's rho of 0.7 on both tasks, providing a practical, scalable alternative to human evaluation. Using the best simulator for each task, we benchmark 18 assistants, including the latest LLMs such as GPT-5, Claude 4.1 Opus, and Gemini 2.5 Pro.

Realistic physics engines play a crucial role for learning to manipulate deformable objects such as garments in simulation. By doing so, researchers can circumvent challenges such as sensing the deformation of the object in the realworld. In spite of the extensive use of simulations for this task, few works have evaluated the reality gap between deformable object simulators and real-world data. We present a benchmark dataset to evaluate the sim-to-real gap in cloth manipulation. The dataset is collected by performing a dynamic as well as a quasi-static cloth manipulation task involving contact with a rigid table. We use the dataset to evaluate the reality gap, computational time, and simulation stability of four popular deformable object simulators: MuJoCo, Bullet, Flex, and SOFA. Additionally, we discuss the benefits and drawbacks of each simulator. The benchmark dataset is open-source. Supplementary material, videos, and code, can be found at https://sites.google.com/view/cloth-sim2real-benchmark.

Hybrid computer-use agents can act through screenshots or call text tools. We find that having a tool available does not settle which way the effect goes. Under one identical GUI-MCP harness on the OSWorld-MCP benchmark (309 tasks), the same MCP tools improve a reasoning model by +4.0pp and degrade a non-reasoning model by -5.9pp (5 runs each, both beyond 2 SE). What separates the two is tool-decision behavior. The non-reasoning policy ignores, misnames, or falsely terminates around tools. The reasoning model avoids these failures, yet still calls a tool on only 55/309 tasks, 23.9% of the tool-reachable ones. We call this shortfall the adoption gap. Both levels of the problem share one cause: the model already has a cheaper route and is never trained to take it. Multi-turn RL probes that cause. At the action level, a dense tool bonus raises spreadsheet adoption 0.03 -> 0.33 and carries into greedy decoding, but held-out accuracy does not follow. Behavior is steerable; competence is not. The bottleneck lies in tool-call semantics. At the context level, a successful tool call often makes the next screenshot redundant. Dropping it and halving image history cuts input tokens by about a third, at a small accuracy cost. Retraining under the same observation rule removes that cost. The compressed agent then reaches 37.8% against 33.0% for the uncompressed operating point, at 53% of the input cost, and closes the rich-lean gap on a pre-registered degraded subset to zero. Tools help when the model chooses and integrates them, and current hybrid agents leave many such choices unused. Code and checkpoints: https://github.com/redai-infra/hybrid-routing-agent

Robotic assembly is a longstanding challenge, requiring contact-rich interaction and high precision and accuracy. Many applications also require adaptivity to diverse parts, poses, and environments, as well as low cycle times. In other areas of robotics, simulation is a powerful tool to develop algorithms, generate datasets, and train agents. However, simulation has had a more limited impact on assembly. We present IndustReal, a set of algorithms, systems, and tools that solve assembly tasks in simulation with reinforcement learning (RL) and successfully achieve policy transfer to the real world. Specifically, we propose 1) simulation-aware policy updates, 2) signed-distance-field rewards, and 3) sampling-based curricula for robotic RL agents. We use these algorithms to enable robots to solve contact-rich pick, place, and insertion tasks in simulation. We then propose 4) a policy-level action integrator to minimize error at policy deployment time. We build and demonstrate a real-world robotic assembly system that uses the trained policies and action integrator to achieve repeatable performance in the real world. Finally, we present hardware and software tools that allow other researchers to reproduce our system and results. For videos and additional details, please see http://sites.google.com/nvidia.com/industreal .

Realistic simulation is critical for applications ranging from robotics to animation. Traditional analytic simulators sometimes struggle to capture sufficiently realistic simulation which can lead to problems including the well known "sim-to-real" gap in robotics. Learned simulators have emerged as an alternative for better capturing real-world physical dynamics, but require access to privileged ground truth physics information such as precise object geometry or particle tracks. Here we propose a method for learning simulators directly from observations. Visual Particle Dynamics (VPD) jointly learns a latent particle-based representation of 3D scenes, a neural simulator of the latent particle dynamics, and a renderer that can produce images of the scene from arbitrary views. VPD learns end to end from posed RGB-D videos and does not require access to privileged information. Unlike existing 2D video prediction models, we show that VPD's 3D structure enables scene editing and long-term predictions. These results pave the way for downstream applications ranging from video editing to robotic planning.

Language model agents are increasingly deployed in open-world tool environments, which require balancing exploring unknown capabilities and exploiting known ones. Existing methods face a performance-efficiency tradeoff: they either rigidly decouple exploration and execution or interleave them without coordination. We argue that the key lies not in whether to decouple or interleave them, but in how to coordinate them across granularities. We introduce ParaAct, a structured parallel-action loop that combines phase-level Exploration rightleftharpoons Execution with action-level parallelism. To learn this loop, ParaAgent combines multi-agent cold-start demonstrations with reinforcement learning under multi-level advantage decoupling, making planning structure explicit and supervising it with step-, phase-, and trajectory-level rewards. Learning is supported by our ToolEnv, a scalable simulator grounded in 50,011 realistic tool interfaces. On two open-world tool benchmarks, ParaAgent-4B achieves the best average success among all baselines, including GPT-4.1 systems, with the largest gains on multi-tool tasks. Behavioral analyses show that these gains stem from this action organization, highlighting its importance for capable and efficient open-world agents.

Most existing embodied intelligence methods formulate perception, reasoning, planning, and control within a unified parameterized policy. Yet these capabilities are inherently hierarchical and heterogeneous, making them difficult to reliably learn and modularize within a single model. We propose a capability externalization approach that decouples heterogeneous capabilities into independently optimized tools, dynamically invoked at inference time. To this end, we introduce Embodied Tool Protocol (ETP), a standardized protocol for embodied tool registration, discovery, invocation, and execution, and curate 100+ validated tools spanning perception, cognition, reasoning, and execution as the tool base. Building on this, we construct EmbodiedToolBench to evaluate both whether tool augmentation improves embodied performance and how well current models use tools across tool-necessity recognition, tool selection, tool execution, and tool-chain composition. Experiments across simulation and real-world platforms confirm that capability externalization consistently improves embodied performance (avg. gain 31% on EB-ALFRED and 36% on EB-Navigation), yet reveal a clear boundary: gains are substantial for cognition and perception but are limited for execution-type capabilities. Moreover, our analysis reveals that knowing when, which, and how to invoke tools remains a persistent challenge across all models, thereby highlighting embodied tool competence as a critical direction for future research.

Deciding whether to call a tool is a core competence of an LLM agent, and a costly one to get wrong: needless calls add latency, accrue cost, and may trigger irreversible side effects, while missing calls leave the model confidently wrong on questions it could only answer through tool-calls. Models manage this balance poorly, both over-using and under-using tools. Existing methods such as post-training and prompt engineering are expensive and difficult to modify at inference time. We show that whether an instruction-tuned model calls a tool can be controlled by a single linear direction in its residual stream, extracted without any training from the model's own tool-use preference signal and turned into an inference-time intervention with no prompt change. Adding the direction with strength α moves the call rate monotonically from near 0% to over 90% while keeping calls well-formed. The steering works in both directions: dialing it down suppresses calls, and dialing it up induces new calls that land precisely on the questions the model cannot answer from its own knowledge. We also show that the direction generalizes to unseen tools with strength comparable to each tool's own direction and without favoring any specific tool choice. With live tool execution, a single sweep of the steering traces a cost/accuracy Pareto frontier and nearly doubles open-domain QA accuracy (0.29 ! rightarrow ! 0.56); the same recipe transfers across a diverse range of models spanning dense, MoE, and multimodal architectures, without any training. Our code is publicly available at https://github.com/YuqiChen4188/Steering-Tool-Use-Propensity.

Simulation agents are essential for designing and testing systems that interact with humans, such as autonomous vehicles (AVs). These agents serve various purposes, from benchmarking AV performance to stress-testing the system's limits, but all use cases share a key requirement: reliability. A simulation agent should behave as intended by the designer, minimizing unintended actions like collisions that can compromise the signal-to-noise ratio of analyses. As a foundation for reliable sim agents, we propose scaling self-play to thousands of scenarios on the Waymo Open Motion Dataset under semi-realistic limits on human perception and control. Training from scratch on a single GPU, our agents nearly solve the full training set within a day. They generalize effectively to unseen test scenes, achieving a 99.8% goal completion rate with less than 0.8% combined collision and off-road incidents across 10,000 held-out scenarios. Beyond in-distribution generalization, our agents show partial robustness to out-of-distribution scenes and can be fine-tuned in minutes to reach near-perfect performance in those cases. Demonstrations of agent behaviors can be found at this link. We open-source both the pre-trained agents and the complete code base. Demonstrations of agent behaviors can be found at https://sites.google.com/view/reliable-sim-agents.

Tool-calling is a central component of modern large language model (LLM) agents, equipping them with skills beyond their parametric knowledge. This paper studies tool-calling along two complementary axes: effectiveness, i.e., how this capability is measured, and efficiency, i.e., how it is learned. On effectiveness, we systematically analyze tool-calling evaluation pipelines and show that results can be highly sensitive to seemingly minor, often undocumented implementation choices including the random seed, system prompt, multi-turn template construction, and how prior interaction/reasoning history is carried forward. These choices can lead to substantial differences in reported performance, especially in multi-turn settings where without rigorous standardization, leaderboard rankings are unreliable. On efficiency, we examine standard reinforcement learning (RL) for tool-calling and identify two sources of computational waste: (i) during rollouts, many prompts produce no learning signal, and (ii) during policy updates, optimization incurs high computational cost. Guided by these findings, we introduce two techniques that accelerate RL-based tool-calling training, achieving substantial wall-clock speedup without degrading performance.

Simulating object dynamics from real-world perception shows great promise for digital twins and robotic manipulation but often demands labor-intensive measurements and expertise. We present a fully automated Real2Sim pipeline that generates simulation-ready assets for real-world objects through robotic interaction. Using only a robot's joint torque sensors and an external camera, the pipeline identifies visual geometry, collision geometry, and physical properties such as inertial parameters. Our approach introduces a general method for extracting high-quality, object-centric meshes from photometric reconstruction techniques (e.g., NeRF, Gaussian Splatting) by employing alpha-transparent training while explicitly distinguishing foreground occlusions from background subtraction. We validate the full pipeline through extensive experiments, demonstrating its effectiveness across diverse objects. By eliminating the need for manual intervention or environment modifications, our pipeline can be integrated directly into existing pick-and-place setups, enabling scalable and efficient dataset creation. Project page (with code and data): https://scalable-real2sim.github.io/.

Tool-calling agents are increasingly deployed in real-world customer-facing workflows. Yet most studies on tool-calling agents focus on idealized settings with general, fixed, and well-specified tasks. In real-world applications, user requests are often (1) ambiguous, (2) changing over time, or (3) infeasible due to policy constraints, and training and evaluation data that cover these diverse, complex interaction patterns remain under-represented. To bridge the gap, we present Trajectory2Task, a verifiable data generation pipeline for studying tool use at scale under three realistic user scenarios: ambiguous intent, changing intent, and infeasible intents. The pipeline first conducts multi-turn exploration to produce valid tool-call trajectories. It then converts these trajectories into user-facing tasks with controlled intent adaptations. This process yields verifiable task that support closed-loop evaluation and training. We benchmark seven state-of-the-art LLMs on the generated complex user scenario tasks and observe frequent failures. Finally, using successful trajectories obtained from task rollouts, we fine-tune lightweight LLMs and find consistent improvements across all three conditions, along with better generalization to unseen tool-use domains, indicating stronger general tool-calling ability.

The ability to use tools is fundamental for large language model (LLM) agents. Given a task, existing systems use LLMs to plan and generate tool calls, which are executed by real-world tools to complete the task. However, tool calls are prone to errors because they are derived merely from LLM intrinsic capabilities. What is more, while it is useful to let LLMs iteratively refine the tool-call sequence using execution results from real tools, this process can be expensive and lead to unsafe results. To improve LLM tool calls and address issues caused by using real tools for refinement, we introduce Gecko, a comprehensive environment that simulates tool responses using a combination of rules and LLMs. Specifically, Gecko checks the validity of tool calls including input arguments and tool names, synthesizes reasonable responses that adhere to the output schema, and assesses whether all task objectives have been achieved. These three types of feedback provided by Gecko allow LLMs to refine their tool calls, forming a simple yet effective test-time scaling method named GATS. On BFCLv3 and τ^2-bench, GATS consistently improves the tool calling performance of various LLMs including GPT-4o, GPT-5, and Gemini-3.0-pro. We further discuss working mechanisms of our method and share future possibilities.

Simulated user agents are increasingly deployed in usability testing to support fast, iterative UX workflows, as they generate rich data such as action logs and think-aloud reasoning, but the unstructured nature of this output often obscures actionable insights. We present UXCascade, an interactive tool for extracting, aggregating, and presenting agent-generated usability feedback at scale. Our core contribution is a multi-level analysis workflow that (1) highlights patterns across persona traits, goals, and outcomes, (2) links agent reasoning to specific issues, and (3) supports actionable design improvements. UXCascade operationalizes this approach by listing agent goals, traits, and issues in a structured overview. Practitioners can explore detailed reasoning traces and annotated views, propose interface edits, and assess their impact across personas. This enables a top-down, exploration-driven analysis from patterns to concrete, actionable UX interventions. A user study with eight UX professionals demonstrates that UXCascade integrates into existing workflows, enabling iterative feedback during early-stage interface development.

Simulation forms the backbone of modern self-driving development. Simulators help develop, test, and improve driving systems without putting humans, vehicles, or their environment at risk. However, simulators face a major challenge: They rely on realistic, scalable, yet interesting content. While recent advances in rendering and scene reconstruction make great strides in creating static scene assets, modeling their layout, dynamics, and behaviors remains challenging. In this work, we turn to language as a source of supervision for dynamic traffic scene generation. Our model, LCTGen, combines a large language model with a transformer-based decoder architecture that selects likely map locations from a dataset of maps, and produces an initial traffic distribution, as well as the dynamics of each vehicle. LCTGen outperforms prior work in both unconditional and conditional traffic scene generation in terms of realism and fidelity. Code and video will be available at https://ariostgx.github.io/lctgen.

Large language models are increasingly used as agentic workflow executors, yet existing training data and benchmarks largely assume informationally complete, single-turn queries. Our analysis of 16K real-world sessions shows that 75.9% of interactions are multi-turn, revealing a substantial gap between how users interact with agents and how such systems are trained and evaluated. We introduce PersonaForge, a user simulation framework for synthesizing realistic multi-turn user--agent interactions. PersonaForge combines a four-dimensional persona space, SOUL-driven behavioral control calibrated to real-user statistics, and Reverse Deep Construction grounded in authentic seed queries. Using PersonaForge, we construct a 6.3K-record training dataset and PersonaForge-Bench, a manually annotated 138-task benchmark spanning over 20 professional domains with four-dimensional scoring. Experiments on Qwen3.5-27B show that PersonaForge training improves the composite score by +4.1%, with gains across all four dimensions and the largest improvements in Task Completion (+6.0%) and Response Quality (+6.8%). Further analyses show that PersonaForge-trained agents use fewer turns and tool calls, suggesting improved interaction efficiency, while ablations confirm the contribution of SOUL components and adaptive simulation. Together, PersonaForge and PersonaForge-Bench establish a foundation for training and evaluating agents under realistic multi-turn user interaction.

Tool-augmented LLM agents tend to call tools indiscriminately, even when the model can answer directly. Each unnecessary call wastes API fees and latency, yet no existing benchmark systematically studies when a tool call is actually needed. We propose When2Tool, a benchmark of 18 environments (15 single-hop, 3 multi-hop) spanning three categories of tool necessity -- computational scale, knowledge boundaries, and execution reliability -- each with controlled difficulty levels that create a clear decision boundary between tool-necessary and tool-unnecessary tasks. We evaluate two families of training-free baselines: Prompt-only (varying the prompt to discourage unnecessary calls) and Reason-then-Act (requiring the model to reason about tool necessity before acting). Both provide limited control: Prompt-only suppresses necessary calls alongside unnecessary ones, and Reason-then-Act still incurs a disproportionate accuracy cost on hard tasks. To understand why these baselines fail, we probe the models' hidden states and find that tool necessity is linearly decodable from the pre-generation representation with AUROC 0.89--0.96 across six models, substantially exceeding the model's own verbalized reasoning. This reveals that models already know when tools are needed, but fail to act on this knowledge during generation. Building on this finding, we propose Probe&Prefill, which uses a lightweight linear probe to read the hidden-state signal and prefills the model's response with a steering sentence. Across all models tested, Probe&Prefill reduces tool calls by 48% with only 1.7% accuracy loss, while the best baseline at comparable accuracy only reduces 6% of tool calls, or achieves a similar tool call reduction but incurs a 5times higher accuracy loss. Our code is available at https://github.com/Trustworthy-ML-Lab/when2tool

Sim-to-real transfer remains a significant challenge in robotics due to the discrepancies between simulated and real-world dynamics. Traditional methods like Domain Randomization often fail to capture fine-grained dynamics, limiting their effectiveness for precise control tasks. In this work, we propose a novel approach that dynamically adjusts simulation environment parameters online using in-context learning. By leveraging past interaction histories as context, our method adapts the simulation environment dynamics to real-world dynamics without requiring gradient updates, resulting in faster and more accurate alignment between simulated and real-world performance. We validate our approach across two tasks: object scooping and table air hockey. In the sim-to-sim evaluations, our method significantly outperforms the baselines on environment parameter estimation by 80% and 42% in the object scooping and table air hockey setups, respectively. Furthermore, our method achieves at least 70% success rate in sim-to-real transfer on object scooping across three different objects. By incorporating historical interaction data, our approach delivers efficient and smooth system identification, advancing the deployment of robots in dynamic real-world scenarios. Demos are available on our project page: https://sim2real-capture.github.io/

Large language model (LLM) agents integrated with external tools are vulnerable to indirect prompt injections embedded in environmental states. However, existing studies largely rely on manually implemented or reused environments, stochastic LLM-based tool simulation, and predefined injection locations, limiting scalable security research across broader domains. To bridge this gap, we propose **ToolHazard**, a scalable adversarial environment synthesis framework that reduces human engineering and supports expansion with additional seed domains and compute. Through an Environment Simulator, an Attacker Agent, and a User Simulator, ToolHazard synthesizes executable stateful environments, discovers viable injection points and generates environment-specific payloads, and constructs state-grounded long-horizon tasks. Based on ToolHazard, we build **ToolHazard-Bench** for stress-testing agents under complex workflows and diverse environmental attacks. Experiments reveal substantial agent vulnerabilities and show that injection timing and placement affect attack effectiveness. Moreover, ToolHazard-generated alignment data improves security on both ToolHazard-Bench and AgentDojo while preserving benign task utility.

Large language models are increasingly deployed as agents that solve tasks by interacting with external tool environments. Although recent tool-use benchmarks increasingly cover complex task settings, they still largely assume clean, stable, and trustworthy tool environments, leaving tool-environment unreliability insufficiently examined. We introduce ToolBench-X, a benchmark for evaluating agents under recoverable reliability hazards. ToolBench-X contains executable multi-step tasks across diverse domains and sequential, parallel, and mixed workflows, each paired with deterministic tools and a canonical final answer for automatic evaluation. Starting from clean tool environments, ToolBench-X injects five structured hazard types: Specification Drift, Invocation Error, Execution Failure, Output Drift, and Cross-source Conflict. Crucially, each injected instance remains solvable through at least one valid recovery path, such as retrying, fallback, verification, or cross-checking. Experiments reveal a substantial reliability gap: agents that perform well with reliable tools often fail under recoverable hazards. Further analysis shows that failures are driven less by tool-use volume or inference budget than by limited hazard diagnosis and ineffective recovery. Targeted recovery hints recover many failed tasks, while test-time scaling yields more limited gains. These results suggest that tool-use evaluation should move beyond function-call accuracy toward task completion under unreliable tool environments. The code and data is available at https://github.com/Foreverskyou/ToolBench-X.

Language models (LMs) are powerful yet mostly for text generation tasks. Tools have substantially enhanced their performance for tasks that require complex skills. However, many works adopt the term "tool" in different ways, raising the question: What is a tool anyway? Subsequently, where and how do tools help LMs? In this survey, we provide a unified definition of tools as external programs used by LMs, and perform a systematic review of LM tooling scenarios and approaches. Grounded on this review, we empirically study the efficiency of various tooling methods by measuring their required compute and performance gains on various benchmarks, and highlight some challenges and potential future research in the field.

Equipping Large Language Models (LLMs) with external tools enables them to solve complex real-world problems. However, the robustness of existing methods remains a critical challenge when confronting novel or evolving tools. Existing trajectory-centric paradigms primarily rely on memorizing static solution paths during training, which limits the ability of LLMs to generalize tool usage to newly introduced or previously unseen tools. In this paper, we propose ToolMaster, a framework that shifts tool use from imitating golden tool-calling trajectories to actively learning tool usage through interaction with the environment. To optimize LLMs for tool planning and invocation, ToolMaster adopts a trial-and-execution paradigm, which trains LLMs to first imitate teacher-generated trajectories containing explicit tool trials and self-correction, followed by reinforcement learning to coordinate the trial and execution phases jointly. This process enables agents to autonomously explore correct tool usage by actively interacting with environments and forming experiential knowledge that benefits tool execution. Experimental results demonstrate that ToolMaster significantly outperforms existing baselines in terms of generalization and robustness across unseen or unfamiliar tools. All code and data are available at https://github.com/NEUIR/ToolMaster.

Simulation is an integral part in the process of developing autonomous vehicles and advantageous for training, validation, and verification of driving functions. Even though simulations come with a series of benefits compared to real-world experiments, various challenges still prevent virtual testing from entirely replacing physical test-drives. Our work provides an overview of these challenges with regard to different aspects and types of simulation and subsumes current trends to overcome them. We cover aspects around perception-, behavior- and content-realism as well as general hurdles in the domain of simulation. Among others, we observe a trend of data-driven, generative approaches and high-fidelity data synthesis to increasingly replace model-based simulation.

The ability to automatically detect and track surgical instruments in endoscopic videos can enable transformational interventions. Assessing surgical performance and efficiency, identifying skilled tool use and choreography, and planning operational and logistical aspects of OR resources are just a few of the applications that could benefit. Unfortunately, obtaining the annotations needed to train machine learning models to identify and localize surgical tools is a difficult task. Annotating bounding boxes frame-by-frame is tedious and time-consuming, yet large amounts of data with a wide variety of surgical tools and surgeries must be captured for robust training. Moreover, ongoing annotator training is needed to stay up to date with surgical instrument innovation. In robotic-assisted surgery, however, potentially informative data like timestamps of instrument installation and removal can be programmatically harvested. The ability to rely on tool installation data alone would significantly reduce the workload to train robust tool-tracking models. With this motivation in mind we invited the surgical data science community to participate in the challenge, SurgToolLoc 2022. The goal was to leverage tool presence data as weak labels for machine learning models trained to detect tools and localize them in video frames with bounding boxes. We present the results of this challenge along with many of the team's efforts. We conclude by discussing these results in the broader context of machine learning and surgical data science. The training data used for this challenge consisting of 24,695 video clips with tool presence labels is also being released publicly and can be accessed at https://console.cloud.google.com/storage/browser/isi-surgtoolloc-2022.

Large Language Models (LLMs) have made significant strides in code generation and problem solving. Current approaches employ external tool-based iterative debuggers that use compiler or other tool-based runtime feedback to refine coarse programs generated by various methods. However, the effectiveness of these approaches heavily relies on the quality of the initial code generation, which remains an open challenge. In this paper, we introduce CodeSim, a novel multi-agent code generation framework that comprehensively addresses the stages of program synthesis-planning, coding, and debugging-through a human-like perception approach. As human verifies their understanding of any algorithms through visual simulation, CodeSim uniquely features a method of plan verification and internal debugging through the step-by-step simulation of input/output. Extensive experiments across seven challenging competitive problem-solving and program synthesis benchmarks demonstrate CodeSim's remarkable code generation capabilities. Our framework achieves new state-of-the-art (pass@1) results-(HumanEval 95.1%, MBPP 90.7%, APPS 22%, and CodeContests 29.1%). Furthermore, our method shows potential for even greater enhancement when cascaded with external debuggers. To facilitate further research and development in this area, we have open-sourced our framework in this link (https://kagnlp.github.io/codesim.github.io/).

As AI agents increasingly operate in open, real-world environments, they require a deep synergy of multimodal perception, tool invocation with multi-hop reasoning, and dynamic interaction with users. However, existing benchmarks fail to jointly evaluate these capabilities due to challenges in designing strictly coupled multi-capability tasks, simulating natural and task-constrained user feedback, and ensuring objective evaluation of dynamic interaction. To bridge this gap, we introduce EgoBench, the first interactive multimodal benchmark for tool-using agents. EgoBench comprises 1,045 egocentric-video-grounded tasks covering four daily scenarios, along with a user-agent-tool interactive environment for evaluation. We implement a three-stage synergistic pipeline through which each task is designed to enforce the joint application of visual perception and tool-augmented multi-hop reasoning. We additionally develop a multi-agent simulated user within EgoBench to evaluate agents' interaction capabilities, which generates high-fidelity, task-aligned responses to agents. Furthermore, we establish a deterministic joint validation framework that guarantees objective assessment through process-based and result-based equivalence. Benchmarking eight SOTA video-MLLM agents on EgoBench reveals a severe performance ceiling: the best model achieves only 30.62% accuracy in the best-performing scenario, averaging 19.43% across all four scenarios. Finally, we conduct a multi-dimensional error analysis to disentangle failure modes, exposing capability bottlenecks for advancing future AI agents.

As user simulators are increasingly used for interactive training and evaluation of AI assistants, it is essential that they represent the diverse behaviors of real users. While existing works train user simulators to generate human-like responses, whether they capture the broad and heterogeneous distribution of real user behaviors remains an open question. In this work, we introduce a method to measure the distributional gap between real and simulated user behaviors, validated through a human study and ablations. Given a dataset of real and simulated conversations, our method extracts representations of user behavior from each conversation, quantizes them into discrete distributions via clustering, then computes divergence metrics. We provide the first systematic evaluation of 24 LLM-based user simulators on coding and writing tasks, and reveal a large distributional gap from real users that varies across model families, scales, and behavioral facets. Pairwise comparisons show that most simulators behave similarly, while a few stand apart. Combining behaviorally complementary simulators brings the resulting distribution closer to real users compared to either simulator on its own. Finally, a TF-IDF analysis of the clusters surfaces interpretable patterns of behaviors that simulators capture, miss, and hallucinate.

Proactive agents that anticipate user needs and autonomously execute tasks hold great promise as digital assistants, yet the lack of realistic user simulation frameworks hinders their development. Existing approaches model apps as flat tool-calling APIs, failing to capture the stateful and sequential nature of user interaction in digital environments and making realistic user simulation infeasible. We introduce Proactive Agent Research Environment (Pare), a framework for building and evaluating proactive agents in digital environments. Pare models applications as finite state machines with stateful navigation and state-dependent action space for the user simulator, enabling active user simulation. Building on this foundation, we present Pare-Bench, a benchmark of 143 diverse tasks spanning communication, productivity, scheduling, and lifestyle apps, designed to test context observation, goal inference, intervention timing, and multi-app orchestration.

Tool-Augmented Language Models (TALMs) leverage external APIs to answer user queries across various domains. However, existing benchmark datasets for TALM research often feature simplistic dialogues that do not reflect real-world scenarios, such as the need for models to ask clarifying questions or proactively call additional APIs when essential information is missing. To address these limitations, we construct and release ToolDial, a dataset comprising 11,111 multi-turn dialogues, with an average of 8.95 turns per dialogue, based on APIs from RapidAPI. ToolDial has two key characteristics. First, the dialogues incorporate 16 user and system actions (e.g., "Request", "Clarify", "Fail inform") to capture the rich dynamics of real-world interactions. Second, we simulate dialogues where the system requests necessary information from the user based on API documentation and seeks additional APIs if the user fails to provide the required information. To facilitate this process, we introduce a method for generating an API graph that represents input and output compatibility between APIs. Using ToolDial, we evaluate a suite of language models on their ability to predict correct actions and extract input parameter values for API calls from the dialogue history. Modern language models achieve accuracy scores below 70%, indicating substantial room for improvement. We release our dataset and code at https://github.com/holi-lab/ToolDial.

Tool-augmented LLM agents commonly rely on step-wise atomic tool calls, where each invocation, observation, and value transfer is exposed in the main reasoning trace. This creates an execution-granularity mismatch: locally deterministic tool workflows are unfolded into repeated model-visible decisions, consuming context and forcing the model to manage low-level dataflow in the trace. We introduce HyperTool, a unified executable MCP-style tool interface that changes the model-visible unit of tool execution. A model invokes HyperTool with a code block that can call existing tools through their original schemas, manipulate returned values, and pass intermediate results locally, folding deterministic tool subroutines into a single outer call. To train models to use this interface, we synthesize HyperTool-format trajectories from cross-tool compositional tasks and verify them in real MCP environments. On MCP-Universe, HyperTool improves average accuracy from 15.69\% to 35.29\% on Qwen3-32B and from 9.93\% to 33.33\% on Qwen3-8B, and surpass GPT-OSS and Kimi-k2.5 on average accuracy, showing that our HyperTool can substantially improve multi-step tool use.

Model-free control strategies such as reinforcement learning have shown the ability to learn control strategies without requiring an accurate model or simulator of the world. While this is appealing due to the lack of modeling requirements, such methods can be sample inefficient, making them impractical in many real-world domains. On the other hand, model-based control techniques leveraging accurate simulators can circumvent these challenges and use a large amount of cheap simulation data to learn controllers that can effectively transfer to the real world. The challenge with such model-based techniques is the requirement for an extremely accurate simulation, requiring both the specification of appropriate simulation assets and physical parameters. This requires considerable human effort to design for every environment being considered. In this work, we propose a learning system that can leverage a small amount of real-world data to autonomously refine a simulation model and then plan an accurate control strategy that can be deployed in the real world. Our approach critically relies on utilizing an initial (possibly inaccurate) simulator to design effective exploration policies that, when deployed in the real world, collect high-quality data. We demonstrate the efficacy of this paradigm in identifying articulation, mass, and other physical parameters in several challenging robotic manipulation tasks, and illustrate that only a small amount of real-world data can allow for effective sim-to-real transfer. Project website at https://weirdlabuw.github.io/asid

Machine learning has facilitated significant advancements across various robotics domains, including navigation, locomotion, and manipulation. Many such achievements have been driven by the extensive use of simulation as a critical tool for training and testing robotic systems prior to their deployment in real-world environments. However, simulations consist of abstractions and approximations that inevitably introduce discrepancies between simulated and real environments, known as the reality gap. These discrepancies significantly hinder the successful transfer of systems from simulation to the real world. Closing this gap remains one of the most pressing challenges in robotics. Recent advances in sim-to-real transfer have demonstrated promising results across various platforms, including locomotion, navigation, and manipulation. By leveraging techniques such as domain randomization, real-to-sim transfer, state and action abstractions, and sim-real co-training, many works have overcome the reality gap. However, challenges persist, and a deeper understanding of the reality gap's root causes and solutions is necessary. In this survey, we present a comprehensive overview of the sim-to-real landscape, highlighting the causes, solutions, and evaluation metrics for the reality gap and sim-to-real transfer.

Current Large Language Model (LLM) agents demonstrate strong reasoning and tool use capabilities, but often lack self-awareness, failing to balance these approaches effectively. This imbalance leads to Tool Overuse, where models unnecessarily rely on external tools for tasks solvable with parametric knowledge, increasing computational overhead. Inspired by human metacognition, we introduce SMART (Strategic Model-Aware Reasoning with Tools), a paradigm that enhances an agent's self-awareness to optimize task handling and reduce tool overuse. To support this paradigm, we introduce SMART-ER, a dataset spanning three domains, where reasoning alternates between parametric knowledge and tool-dependent steps, with each step enriched by rationales explaining when tools are necessary. Through supervised training, we develop SMARTAgent, a family of models that dynamically balance parametric knowledge and tool use. Evaluations show that SMARTAgent reduces tool use by 24% while improving performance by over 37%, enabling 7B-scale models to match its 70B counterpart and GPT-4o. Additionally, SMARTAgent generalizes to out-of-distribution test data like GSM8K and MINTQA, maintaining accuracy with just one-fifth the tool calls. These highlight the potential of strategic tool use to enhance reasoning, mitigate overuse, and bridge the gap between model size and performance, advancing intelligent and resource-efficient agent designs.

Recent benchmarks rely on user simulators to evaluate AI agents in multi-turn interaction. While existing simulation techniques demonstrate surface fidelity to human style and behavior, ecologically valid interactive benchmarking also requires alignment in when and how agents fail across simulated and real user populations. We find that existing simulators lack outcome calibration: agreement with observed success rates and failure patterns when real users interact with the same agent. We introduce Calibrated User Embeddings (CUE), a framework that both encodes observed sessions and samples continuous representations, then decodes them into persona commands to steer LLMs to act as user simulators without training. Through this, we evaluate user-conditioned replay of past sessions and aggregate metric agreement when sampling novel personas for the same tasks. On τ^2-Bench, CUEd simulators commit fewer simulator-attributed errors and more faithfully reproduce real-user agent failure modes, aggregate success rates, and outcomes for specific task-user pairs than other persona-based simulation methods. These gains coexist with competitive user fidelity as measured using metrics established in prior work. After being fit to mostly customer support interactions, the same CUEd simulators generalize to document creation, math tutoring, and casual conversation, and remain effective across different simulator LLMs without CUE retraining.

Virtual reality enables users to experience real-life situations in immersive environments. Interaction methods significantly shape user experience, particularly in high fidelity simulations mimicking real world tasks. This study evaluates two primary VR interaction techniques, hand based and controller based, through virtual shopping tasks in a simulated supermarket with 40 participants. Hand-based interaction was preferred for its natural, immersive qualities and alignment with real-world gestures but faced usability challenges, including limited haptic feedback and grasping inefficiencies. In contrast, controller-based interaction offered greater precision and reliability, making it more suitable for tasks requiring fine motor skills.

Data scaling and standardized evaluation benchmarks have driven significant advances in natural language processing and computer vision. However, robotics faces unique challenges in scaling data and establishing evaluation protocols. Collecting real-world data is resource-intensive and inefficient, while benchmarking in real-world scenarios remains highly complex. Synthetic data and simulation offer promising alternatives, yet existing efforts often fall short in data quality, diversity, and benchmark standardization. To address these challenges, we introduce RoboVerse, a comprehensive framework comprising a simulation platform, a synthetic dataset, and unified benchmarks. Our simulation platform supports multiple simulators and robotic embodiments, enabling seamless transitions between different environments. The synthetic dataset, featuring high-fidelity physics and photorealistic rendering, is constructed through multiple approaches. Additionally, we propose unified benchmarks for imitation learning and reinforcement learning, enabling evaluation across different levels of generalization. At the core of the simulation platform is MetaSim, an infrastructure that abstracts diverse simulation environments into a universal interface. It restructures existing simulation environments into a simulator-agnostic configuration system, as well as an API aligning different simulator functionalities, such as launching simulation environments, loading assets with initial states, stepping the physics engine, etc. This abstraction ensures interoperability and extensibility. Comprehensive experiments demonstrate that RoboVerse enhances the performance of imitation learning, reinforcement learning, world model learning, and sim-to-real transfer. These results validate the reliability of our dataset and benchmarks, establishing RoboVerse as a robust solution for advancing robot learning.

Real-world tool-using agents operate over long-horizon workflows with recurring structure and diverse demands, where effective behavior requires not only invoking atomic tools but also abstracting, and reusing higher-level tool compositions. However, existing benchmarks mainly measure instance-level success under static tool sets, offering limited insight into agents' ability to acquire such reusable skills. We address this gap by introducing SkillCraft, a benchmark explicitly stress-test agent ability to form and reuse higher-level tool compositions, where we call Skills. SkillCraft features realistic, highly compositional tool-use scenarios with difficulty scaled along both quantitative and structural dimensions, designed to elicit skill abstraction and cross-task reuse. We further propose a lightweight evaluation protocol that enables agents to auto-compose atomic tools into executable Skills, cache and reuse them inside and across tasks, thereby improving efficiency while accumulating a persistent library of reusable skills. Evaluating state-of-the-art agents on SkillCraft, we observe substantial efficiency gains, with token usage reduced by up to 80% by skill saving and reuse. Moreover, success rate strongly correlates with tool composition ability at test time, underscoring compositional skill acquisition as a core capability.

Tool-augmented Language Models (TaLMs) can invoke external tools to solve problems beyond their parametric capacity. However, it remains unclear whether these tool-enabled gains reflect trustworthy reasoning. Focusing on the Code Interpreter tool, we show that even when tools are selected and executed correctly, TaLMs treat tool outputs as substitutes for reasoning, producing solutions that appear correct but lack coherent justification. We term this failure mode Tool-Induced Myopia (TIM), and study it using PYMATH, a benchmark of 1,679 competition-level mathematical problems for which Python code is helpful but not sufficient. We further develop a multi-dimensional evaluation suite to quantify reasoning degradation in TaLMs relative to their non-tool counterparts. Our findings reveal that while TaLMs achieve up to a 19.3 percentage point gain in final-answer accuracy, their reasoning behavior consistently deteriorates (e.g., non-tool LLMs win up to 41.5% more often in pairwise comparisons of the reasoning process). This degradation intensifies with tool use; the more frequently a model invokes tools, the less coherent its reasoning becomes. Moreover, tool use shifts errors from arithmetic mistakes toward global reasoning failures (logic, assumption, creativity); with TIM present in ~55% of high-risk cases. Finally, we propose a preference-optimization-based framework that realigns TaLMs to use tools as assistive evidence, improving both final-answer accuracy and reasoning depth under tool use. Codes and data are available at: https://github.com/megagonlabs/TIM.

Accurately simulating real world object dynamics is essential for various applications such as robotics, engineering, graphics, and design. To better capture complex real dynamics such as contact and friction, learned simulators based on graph networks have recently shown great promise. However, applying these learned simulators to real scenes comes with two major challenges: first, scaling learned simulators to handle the complexity of real world scenes which can involve hundreds of objects each with complicated 3D shapes, and second, handling inputs from perception rather than 3D state information. Here we introduce a method which substantially reduces the memory required to run graph-based learned simulators. Based on this memory-efficient simulation model, we then present a perceptual interface in the form of editable NeRFs which can convert real-world scenes into a structured representation that can be processed by graph network simulator. We show that our method uses substantially less memory than previous graph-based simulators while retaining their accuracy, and that the simulators learned in synthetic environments can be applied to real world scenes captured from multiple camera angles. This paves the way for expanding the application of learned simulators to settings where only perceptual information is available at inference time.

Robotic simulators play a crucial role in the development and testing of autonomous systems, particularly in the realm of Uncrewed Aerial Vehicles (UAV). However, existing simulators often lack high-level autonomy, hindering their immediate applicability to complex tasks such as autonomous navigation in unknown environments. This limitation stems from the challenge of integrating realistic physics, photorealistic rendering, and diverse sensor modalities into a single simulation environment. At the same time, the existing photorealistic UAV simulators use mostly hand-crafted environments with limited environment sizes, which prevents the testing of long-range missions. This restricts the usage of existing simulators to only low-level tasks such as control and collision avoidance. To this end, we propose the novel FlightForge UAV open-source simulator. FlightForge offers advanced rendering capabilities, diverse control modalities, and, foremost, procedural generation of environments. Moreover, the simulator is already integrated with a fully autonomous UAV system capable of long-range flights in cluttered unknown environments. The key innovation lies in novel procedural environment generation and seamless integration of high-level autonomy into the simulation environment. Experimental results demonstrate superior sensor rendering capability compared to existing simulators, and also the ability of autonomous navigation in almost infinite environments.

As NLP evaluation shifts from static benchmarks to multi-turn interactive settings, LLM-based simulators have become widely used as user proxies, serving two roles: generating user turns and providing evaluation signals. Yet, these simulations are frequently assumed to be faithful to real human behaviors, often without rigorous verification. We formalize the Sim2Real gap in user simulation and present the first study running the full τ-bench protocol with real humans (451 participants, 165 tasks), benchmarking 31 LLM simulators across proprietary, open-source, and specialized families using the User-Sim Index (USI), a metric we introduce to quantify how well LLM simulators resemble real user interactive behaviors and feedback. Behaviorally, LLM simulators are excessively cooperative, stylistically uniform, and lack realistic frustration or ambiguity, creating an "easy mode" that inflates agent success rates above the human baseline. In evaluations, real humans provide nuanced judgments across eight quality dimensions while simulated users produce uniformly more positive feedback; rule-based rewards are failing to capture rich feedback signals generated by human users. Overall, higher general model capability does not necessarily yield more faithful user simulation. These findings highlight the importance of human validation when using LLM-based user simulators in the agent development cycle and motivate improved models for user simulation.

An effective multi-turn instruction-following assistant can be developed by creating a simulator that can generate useful interaction data. Apart from relying on its intrinsic weights, an ideal user simulator should also be able to bootstrap external knowledge rapidly in its raw form to simulate the multifarious diversity of text available over the internet. Previous user simulators generally lacked diversity, were mostly closed domain, and necessitated rigid schema making them inefficient to rapidly scale to incorporate external knowledge. In this regard, we introduce, Kaucus, a Knowledge-Augmented User Simulator framework, to outline a process of creating diverse user simulators, that can seamlessly exploit external knowledge as well as benefit downstream assistant model training. Through two GPT-J based simulators viz., a Retrieval Augmented Simulator and a Summary Controlled Simulator we generate diverse simulator-assistant interactions. Through reward and preference model-based evaluations, we find that these interactions serve as useful training data and create more helpful downstream assistants. We also find that incorporating knowledge through retrieval augmentation or summary control helps create better assistants.

Real-world videos provide rich demonstrations of manipulation, but turning them into reusable robot skills requires visually aligned environments, executable physical interactions, and mechanisms for learning from experience. We introduce Real2Gym, an agentic Real2Sim2Real framework that turns human and robot demonstrations into interactive simulation gyms and brings skills acquired in simulation to physical robots. The Real2Sim module reconstructs editable scenes, aligns objects and cameras with the input, validates demonstrated or retargeted actions through native physics execution, and generates task-conditioned variations with action-feasibility checks. Within these environments, the agent generates executable code for manipulation stages, observes their outcomes, and distills successful attempts and failures into reusable task procedures, object-relative motions, and recovery strategies. Through a shared perception-and-control interface, these skills guide subsequent execution in simulation and on real robots, with motions adapted to current observations and no updates to the underlying model weights. Extensive evaluations demonstrate that Real2Gym enables high-fidelity simulation environment reconstruction, outperforming GPT-6 Astra Direct Mode by 16.7% in success rate with approximately 74.9% fewer policy-execution tokens across these environments, while exceeding it by 33.3% in physical robot execution success rate across four tasks on a real Franka robot.

Agentic vision-language models (VLMs), which interleave textual reasoning with explicit tool calls such as cropping and code-based image manipulation, have emerged as a compelling paradigm for reliable and interpretable multimodal reasoning. However, recent studies have revealed that such models often use tools unfaithfully. Many process images are irrelevant to the question (e.g., the tool crops the wrong region or misses the queried target), yet the call still receives full credit and the model still answers correctly. Such decorative or misaligned tool calls waste computation and reveal that the model leans on prior knowledge or the original image rather than the evidence it retrieves. This may stem from two limitations of prevailing methods: the tool reward fails to distinguish useful from useless calls, and tool feedback carries no signal of usefulness. To this end, we introduce FaithEyes, a multi-agent self-judging framework. Concretely, we use a VLM to judge whether each process image helps answer the question. The judgement is injected into the reasoning context as part of the tool observation to help subsequent reasoning, and meanwhile is used to scale the tool reward by the helpful-tool ratio to suppress reward hacking. To keep judgement available at evaluation and thus ensure train-test consistency, we further design a multi-agent framework where the model itself serves as a subagent to judge the tool calls from main agent, eliminating any dependence on an external model at inference. Training via a two-stage SFT + RL pipeline on adapted open-source data, FaithEyes attains competitive or superior accuracy across visual perception and reasoning benchmarks, while markedly improving tool faithfulness. The homepage is at https://github.com/Mosi-AI/FaithEyes.

LLM agents extend large language models with tool-calling capabilities, but ambiguous user instructions often lead to incorrect invocations and task failures. We introduce a principled formulation of structured uncertainty over tool-call parameters, modeling joint tool-argument clarification as a POMDP with Expected Value of Perfect Information (EVPI) objective for optimal question selection and aspect-based cost modeling to prevent redundancy. Our SAGE-Agent leverages this structured uncertainty to achieve superior efficiency: increasing coverage on ambiguous tasks by 7-39\% while reducing clarification questions by 1.5-2.7times compared to strong prompting and uncertainty-based baselines. We present ClarifyBench, the first multi-turn tool-augmented disambiguation benchmark with realistic LLM-based user simulation across diverse domains including document editing, vehicle control, and travel booking. Additionally, we demonstrate that structured uncertainty provides effective training signals for reinforcement learning, boosting When2Call accuracy from 36.5\% to 65.2\% (3B model) and 36.7\% to 62.9\% (7B model) through uncertainty-weighted GRPO training. These results establish structured uncertainty as a principled, efficient approach for tool-augmented agents, improving both task success and interaction efficiency in real-world scenarios.

Generative models offer a scalable and flexible paradigm for simulating complex environments, yet current approaches fall short in addressing the domain-specific requirements of autonomous driving - such as multi-agent interactions, fine-grained control, and multi-camera consistency. We introduce GAIA-2, Generative AI for Autonomy, a latent diffusion world model that unifies these capabilities within a single generative framework. GAIA-2 supports controllable video generation conditioned on a rich set of structured inputs: ego-vehicle dynamics, agent configurations, environmental factors, and road semantics. It generates high-resolution, spatiotemporally consistent multi-camera videos across geographically diverse driving environments (UK, US, Germany). The model integrates both structured conditioning and external latent embeddings (e.g., from a proprietary driving model) to facilitate flexible and semantically grounded scene synthesis. Through this integration, GAIA-2 enables scalable simulation of both common and rare driving scenarios, advancing the use of generative world models as a core tool in the development of autonomous systems. Videos are available at https://wayve.ai/thinking/gaia-2.

Recently, the incredible progress of large language models (LLMs) has ignited the spark of task automation, which decomposes the complex tasks described by user instructions into sub-tasks, and invokes external tools to execute them, and plays a central role in autonomous agents. However, there lacks a systematic and standardized benchmark to foster the development of LLMs in task automation. To this end, we introduce TaskBench to evaluate the capability of LLMs in task automation. Specifically, task automation can be formulated into three critical stages: task decomposition, tool invocation, and parameter prediction to fulfill user intent. This complexity makes data collection and evaluation more challenging compared to common NLP tasks. To generate high-quality evaluation datasets, we introduce the concept of Tool Graph to represent the decomposed tasks in user intent, and adopt a back-instruct method to simulate user instruction and annotations. Furthermore, we propose TaskEval to evaluate the capability of LLMs from different aspects, including task decomposition, tool invocation, and parameter prediction. Experimental results demonstrate that TaskBench can effectively reflects the capability of LLMs in task automation. Benefiting from the mixture of automated data construction and human verification, TaskBench achieves a high consistency compared to the human evaluation, which can be utilized as a comprehensive and faithful benchmark for LLM-based autonomous agents.

As AI agents integrate into enterprise applications, their evaluation demands benchmarks that reflect the complexity of real-world operations. Instead, existing benchmarks overemphasize open-domains such as code, use narrow accuracy metrics, and lack authentic complexity. We present UNDERWRITE, an expert-first, multi-turn insurance underwriting benchmark designed in close collaboration with domain experts to capture real-world enterprise challenges. UNDERWRITE introduces critical realism factors often absent in current benchmarks: proprietary business knowledge, noisy tool interfaces, and imperfect simulated users requiring careful information gathering. Evaluating 13 frontier models, we uncover significant gaps between research lab performance and enterprise readiness: the most accurate models are not the most efficient, models hallucinate domain knowledge despite tool access, and pass^k results show a 20% drop in performance. The results from UNDERWRITE demonstrate that expert involvement in benchmark design is essential for realistic agent evaluation, common agentic frameworks exhibit brittleness that skews performance reporting, and hallucination detection in specialized domains demands compositional approaches. Our work provides insights for developing benchmarks that better align with enterprise deployment requirements.

Multimodal Large Language Models (MLLMs) have shown promising reasoning capabilities in general domains, yet their performance remains limited in specialized settings such as healthcare, especially in multilingual and low-resource scenarios. This gap is critical in regions like rural India, where patients often express complex medical queries in native Indic languages and rely on multimodal inputs such as medical images. Existing English-centric MLLMs struggle to support such use cases, limiting equitable access to AI-driven healthcare assistance. To address this challenge, we introduce ArogyaBodha, a large-scale multilingual multimodal medical question-answer dataset constructed from eight heterogeneous sources, covering 31 body systems, six imaging modalities, and 21 clinical domains across English and seven major Indian languages. We further propose ArogyaSutra, an actor-critic-based multi-agent framework that integrates tool grounding with dual-memory mechanisms for step-wise, reasoning-aware decision making, and uses stored actor-critic simulation trajectories for distillation. Experiments show that our dataset and framework improve multilingual medical reasoning accuracy across all Indic languages, with ablations validating the contribution of each component. The source code and dataset are available at: https://iitp-cse.github.io/ ArogyaSutra/

The Model Context Protocol (MCP) standardizes how large language model (LLM) agents discover, describe, and call external tools. While MCP unlocks broad interoperability, it also enlarges the attack surface by making tools first-class, composable objects with natural-language metadata, and standardized I/O. We present MSB (MCP Security Benchmark), the first end-to-end evaluation suite that systematically measures how well LLM agents resist MCP-specific attacks throughout the full tool-use pipeline: task planning, tool invocation, and response handling. MSB contributes: (1) a taxonomy of 12 attacks including name-collision, preference manipulation, prompt injections embedded in tool descriptions, out-of-scope parameter requests, user-impersonating responses, false-error escalation, tool-transfer, retrieval injection, and mixed attacks; (2) an evaluation harness that executes attacks by running real tools (both benign and malicious) via MCP rather than simulation; and (3) a robustness metric that quantifies the trade-off between security and performance: Net Resilient Performance (NRP). We evaluate nine popular LLM agents across 10 domains and 405 tools, producing 2,000 attack instances. Results reveal the effectiveness of attacks against each stage of MCP. Models with stronger performance are more vulnerable to attacks due to their outstanding tool calling and instruction following capabilities. MSB provides a practical baseline for researchers and practitioners to study, compare, and harden MCP agents. Code: https://github.com/dongsenzhang/MSB

Simulation has been pivotal in recent robotics milestones and is poised to play a prominent role in the field's future. However, recent robotic advances often rely on expensive and high-maintenance platforms, limiting access to broader robotics audiences. This work introduces Wheeled Lab, a framework for the low-cost, open-source wheeled platforms that are already widely established in education and research. Through integration with Isaac Lab, Wheeled Lab introduces modern techniques in Sim2Real, such as domain randomization, sensor simulation, and end-to-end learning, to new user communities. To kickstart education and demonstrate the framework's capabilities, we develop three state-of-the-art policies for small-scale RC cars: controlled drifting, elevation traversal, and visual navigation, each trained in simulation and deployed in the real world. By bridging the gap between advanced Sim2Real methods and affordable, available robotics, Wheeled Lab aims to democratize access to cutting-edge tools, fostering innovation and education in a broader robotics context. The full stack, from hardware to software, is low cost and open-source.