Daily Papers

Gradient descent on a factored model W = UV^top is implicitly biased toward low-rank solutions, while Adam, starting from the same small initialization, is not. We trace the difference to the gauge symmetry of the loss, its invariance under (U, V) mapsto (UQ, VQ). Gradient flow's low-rank mechanism is available to an optimizer only if that optimizer is gauge-equivariant, a condition necessary for the transfer but not sufficient for low-rank recovery. Gradient descent, momentum, "shared-scalar" Adam, Muon, and Shampoo satisfy it. Adam, RMSProp, and the other coordinate-wise methods do not. A structure theorem characterizes the memoryless equivariant rules as exactly the Gram-determined left preconditioners, and a transfer theorem carries gradient flow's pathwise properties to common-scalar flows. We then sort nine update rules on underdetermined matrix sensing by recovery error against the planted ground truth. A one-parameter family from coordinate-wise to shared-scalar preconditioning restores the bias monotonically, isolating anisotropy as the cause. A "spectral schedule" reconciles two opposing reports about Muon: equal-rate updates recover exactly low-rank targets but lose their edge as the spectral tail grows. In transformers, Adam separates two gauge-equivalent initializations at the first step, where the equivariant optimizers stay at float precision, and ends with the per-head invariants W_Q^top W_K 56% apart in relative Frobenius distance, a gap no per-head rotation can close. On two hyperspectral datasets at matched training loss, gradient descent cuts held-out error by 43-44% at the lowest sampling density, and at lower effective rank. Basis choice is therefore not a tuning detail but a decision about which interpolant the optimizer selects.

Diffusion models are a strong backbone for visual generation, but their inherently sequential denoising process leads to slow inference. Previous methods accelerate sampling by caching and reusing intermediate outputs based on feature distances between adjacent timesteps. However, existing caching strategies typically rely on raw feature differences that entangle content and noise. This design overlooks spectral evolution, where low-frequency structure appears early and high-frequency detail is refined later. We introduce Spectral-Evolution-Aware Cache (SeaCache), a training-free cache schedule that bases reuse decisions on a spectrally aligned representation. Through theoretical and empirical analysis, we derive a Spectral-Evolution-Aware (SEA) filter that preserves content-relevant components while suppressing noise. Employing SEA-filtered input features to estimate redundancy leads to dynamic schedules that adapt to content while respecting the spectral priors underlying the diffusion model. Extensive experiments on diverse visual generative models and the baselines show that SeaCache achieves state-of-the-art latency-quality trade-offs.

Diffusion models have been shown to implicitly generate visual content autoregressively in the frequency domain, where low-frequency components are generated earlier in the denoising process while high-frequency details emerge only in later timesteps. This structure offers a natural opportunity for efficient generation, as high-resolution computation on noise-dominated frequencies is largely redundant. We propose Spectral Progressive Diffusion, a general framework that progressively grows resolution along the denoising trajectory of pretrained diffusion models. To this end, we develop a spectral noise expansion mechanism and derive an optimal resolution schedule from the model's power spectrum. Our framework supports training-free acceleration and a novel fine-tuning recipe that further improves efficiency and quality. We demonstrate significant speedups on state-of-the-art pretrained image and video generation models while preserving visual quality.

Denoising diffusion models are widely used for high-quality image and video generation. Their performance depends on noise schedules, which define the distribution of noise levels applied during training and the sequence of noise levels traversed during sampling. Noise schedules are typically handcrafted and require manual tuning across different resolutions. In this work, we propose a principled way to design per-instance noise schedules for pixel diffusion, based on the image's spectral properties. By deriving theoretical bounds on the efficacy of minimum and maximum noise levels, we design ``tight'' noise schedules that eliminate redundant steps. During inference, we propose to conditionally sample such noise schedules. Experiments show that our noise schedules improve generative quality of single-stage pixel diffusion models, particularly in the low-step regime.

Scaling laws have made language-model performance predictable from model size, data, and compute, but they typically treat the optimizer as a fixed training detail. We show that this assumption misses a fundamental axis of representation scaling: how effectively the optimizer converts added FFN width into utilized spectral capacity. Using eigenspectra of feed-forward network representations, measured through soft and hard spectral-ranks, we find that the same Transformer architecture realizes markedly different spectral scaling laws when trained with different optimizers. Holding architecture and width schedule fixed, AdamW exhibits weak hard-rank scaling (β=0.44) on rare-token (TAIL) representations where learning is known to be hardest, whereas Muon achieves linear scaling (β=1.02) in the same regimes, a 2.3times increase in the scaling exponent. This difference is not reducible to validation loss: AdamW configurations can match low-rank Dion variants in perplexity, under extended training, while exhibiting sharply different spectral geometry, demonstrating that matched loss does not imply matched representation structure. Hard--soft rank asymmetry further reveals that optimizers differ not only in how much capacity is realized, but also in how that capacity is structured across eigenmodes. To disentangle optimizer effects from architectural ones, we compare against architectural interventions (e.g., attention rank and positional encoding), and find that optimizer-induced spectral shifts often exceed the architectural effects. These results suggest optimization as a first-class axis of representation scaling, motivating optimizer--architecture co-design.

The memory wall remains the primary bottleneck for training large language models on consumer hardware. We introduce Spectral Compact Training (SCT), a method that replaces dense weight matrices with permanent truncated SVD factors W = U diag(s) V^T, where the full dense matrix is never materialized during training or inference. Gradients flow through the compact spectral factors via standard backpropagation, and U, V are retracted to the Stiefel manifold via QR decomposition after each optimizer step. SCT achieves up to 199x memory reduction per MLP layer at rank 32, enabling full training steps of 70B-parameter architectures on a Steam Deck handheld (7.2 GB peak memory vs. 1,245 GB for dense FP32 training with Adam). Rank-sweep experiments on SmolLM2-1.7B (ranks 32-256, 2000 steps, NVIDIA A100) show that all tested ranks converge to the same loss floor (~4.2-4.5), identifying the learning rate schedule -- not MLP rank -- as the primary bottleneck. Rank 128 emerges as the efficiency sweet spot at 11.7x MLP compression with the lowest perplexity. GPU memory drops 46% at rank 32 while training throughput doubles.

In recent years, Muon has emerged as the dominant method for training large language models, and transformers more broadly. The essential difference, when compared to standard gradient descent methods, is to replace the usual update matrix M=UΣV^top with its polar factor UV^top. In this work, we consider a class of Muon-like updates, where we replace the update M with UΣ^p V^top for some parameter p. We call this a "spectral-shaping" operation, and develop a theory of how to pick p which depends on (a) local curvature of the loss function, (b) noise stemming from stochastic gradients and label noise, and (c) training stage. Our theory and experimentation reveal a previously overlooked behavior: positive p helps early by emphasizing high-curvature directions and accelerating signal contraction, while mildly negative p helps later by reallocating update strength toward low-curvature directions that still contain useful training signals. Building on the insight, we propose DynMuon, an efficient dynamic spectral shaping method that schedules p from positive to mildly negative over training. Extensive experiments across model sizes, architectures, and training settings show that DynMuon consistently achieves lower validation loss than Muon, while requiring 10.6-26.5% fewer steps to reach the same target loss.

3D Gaussian Splatting (3DGS) enables real-time, photorealistic novel view synthesis, making it a highly attractive representation for model-based video tracking. However, leveraging the differentiability of the 3DGS renderer "in the wild" remains notoriously fragile. A fundamental bottleneck lies in the compact, local support of the Gaussian primitives. Standard photometric objectives implicitly rely on spatial overlap; if severe camera misalignment places the rendered object outside the target's local footprint, gradients strictly vanish, leaving the optimizer stranded. We introduce SpectralSplats, a robust tracking framework that resolves this "vanishing gradient" problem by shifting the optimization objective from the spatial to the frequency domain. By supervising the rendered image via a set of global complex sinusoidal features (Spectral Moments), we construct a global basin of attraction, ensuring that a valid, directional gradient toward the target exists across the entire image domain, even when pixel overlap is completely nonexistent. To harness this global basin without introducing periodic local minima associated with high frequencies, we derive a principled Frequency Annealing schedule from first principles, gracefully transitioning the optimizer from global convexity to precise spatial alignment. We demonstrate that SpectralSplats acts as a seamless, drop-in replacement for spatial losses across diverse deformation parameterizations (from MLPs to sparse control points), successfully recovering complex deformations even from severely misaligned initializations where standard appearance-based tracking catastrophically fails.

Recent research in medical image analysis with deep learning almost exclusively focuses on grid- or voxel-based data representations. We challenge this common choice by introducing MedFuncta, a modality-agnostic continuous data representation based on neural fields. We demonstrate how to scale neural fields from single instances to large datasets by exploiting redundancy in medical signals and by applying an efficient meta-learning approach with a context reduction scheme. We further address the spectral bias in commonly used SIREN activations, by introducing an omega_0-schedule, improving reconstruction quality and convergence speed. We validate our proposed approach on a large variety of medical signals of different dimensions and modalities (1D: ECG; 2D: Chest X-ray, Retinal OCT, Fundus Camera, Dermatoscope, Colon Histopathology, Cell Microscopy; 3D: Brain MRI, Lung CT) and successfully demonstrate that we can solve relevant downstream tasks on these representations. We additionally release a large-scale dataset of > 550k annotated neural fields to promote research in this direction.

Diffusion models achieve state-of-the-art image synthesis, with their generative trajectories fundamentally exhibiting a spectral bias, resolving low-frequency global structures early and high-frequency fine details later. Conventional stochastic differential equation (SDE) solvers fail to account for this dynamic, naively injecting uniform white noise throughout the entire process and misusing the finite energy budget. In this work, we establish a mathematical framework that reconsiders SDE inference as a targeted, frequency-decoupled energy transfer. Leveraging this framework, we introduce Colored Noise Sampling (CNS), a novel, training-free stochastic solver. Rather than injecting uniform white noise, CNS utilizes a dynamic, timestep- and frequency-dependent schedule that more efficiently allocates injected energy toward structurally unresolved frequency bands. By actively exploiting the model's inherent spectral bias, CNS systematically steers the generated distribution toward the true data manifold. Extensive experiments demonstrate that CNS significantly outperforms standard ODE and SDE baselines as a strictly plug-and-play, inference-time sampler substitution across diverse architectures (SiT, JiT, FLUX). Compared to standard sampling on ImageNet-256, CNS achieves substantial unguided FID reductions, improving from 8.26 to 6.27 on SiT-XL/2, 32.39 to 26.69 on JiT-B/16, and 11.88 to 8.31 on JiT-H/16, while yielding consistent relative FID improvements with Classifier-Free Guidance. Project page is available at https://hadardavidson.github.io/CNS/.

We study the implicit bias of momentum-based optimizers on smooth homogeneous models. We show that momentum steepest descent algorithms like Muon (spectral norm), MomentumGD (ell_2 norm), and Signum (ell_infty norm) are approximate steepest descent trajectories under a decaying learning rate schedule, proving that these algorithms have a bias towards KKT points of the corresponding margin maximization problem. We extend the analysis to Adam (without the stability constant), which maximizes the ell_infty margin, and to Muon-Signum and Muon-Adam, which maximize a hybrid norm. Our experiments corroborate the theory and show that the identity of the margin maximized depends on the choice of optimizer. Overall, our results extend earlier lines of work on steepest descent in homogeneous models and momentum-based optimizers in linear models.

In this paper, we propose Iris, a deterministic framework for Monocular Depth Estimation (MDE) that integrates real-world priors into the diffusion model. Conventional feed-forward methods rely on massive training data, yet still miss details. Previous diffusion-based methods leverage rich generative priors yet struggle with synthetic-to-real domain transfer. Iris, in contrast, preserves fine details, generalizes strongly from synthetic to real scenes, and remains efficient with limited training data. To this end, we introduce a two-stage Priors-to-Geometry Deterministic (PGD) schedule: the prior stage uses Spectral-Gated Distillation (SGD) to transfer low-frequency real priors while leaving high-frequency details unconstrained, and the geometry stage applies Spectral-Gated Consistency (SGC) to enforce high-frequency fidelity while refining with synthetic ground truth. The two stages share weights and are executed with a high-to-low timestep schedule. Extensive experimental results confirm that Iris achieves significant improvements in MDE performance with strong in-the-wild generalization.

Hyperspectral image classification remains a challenging task due to the high dimensionality of spectral data, significant inter-band redundancy, and the limited availability of annotated samples. While recent transformer-based models have improved the global modeling of spectral-spatial dependencies, their scalability and adaptability under label-scarce conditions remain limited. In this work, we propose LoLA-SpecViT(Low-rank adaptation Local Attention Spectral Vision Transformer), a lightweight spectral vision transformer that addresses these limitations through a parameter-efficient architecture tailored to the unique characteristics of hyperspectral imagery. Our model combines a 3D convolutional spectral front-end with local window-based self-attention, enhancing both spectral feature extraction and spatial consistency while reducing computational complexity. To further improve adaptability, we integrate low-rank adaptation (LoRA) into attention and projection layers, enabling fine-tuning with over 80\% fewer trainable parameters. A novel cyclical learning rate scheduler modulates LoRA adaptation strength during training, improving convergence and generalisation. Extensive experiments on three benchmark datasets WHU-Hi LongKou, WHU-Hi HongHu, and Salinas demonstrate that LoLA-SpecViT consistently outperforms state-of-the-art baselines, achieving up to 99.91\% accuracy with substantially fewer parameters and enhanced robustness under low-label regimes. The proposed framework provides a scalable and generalizable solution for real-world HSI applications in agriculture, environmental monitoring, and remote sensing analytics. Our code is available in the following https://github.com/FadiZidiDz/LoLA-SpecViT{GitHub Repository}.

Efficient task scheduling is paramount in the Linux kernel, where the Completely Fair Scheduler (CFS) meticulously manages CPU resources to balance high utilization with interactive responsiveness. This research pioneers the use of deep learning techniques to predict the sequence of tasks selected by CFS, aiming to evaluate the feasibility of a more generalized and potentially more adaptive task scheduler for diverse workloads. Our core contributions are twofold: first, the systematic generation and curation of a novel scheduling dataset from a running Linux kernel, capturing real-world CFS behavior; and second, the development, training, and evaluation of a Long Short-Term Memory (LSTM) network designed to accurately forecast the next task to be scheduled. This paper further discusses the practical pathways and implications of integrating such a predictive model into the kernel's scheduling framework. The findings and methodologies presented herein open avenues for data-driven advancements in kernel scheduling, with the full source code provided for reproducibility and further exploration.

Time series data, characterized by its intrinsic long and short-range dependencies, poses a unique challenge across analytical applications. While Transformer-based models excel at capturing long-range dependencies, they face limitations in noise sensitivity, computational efficiency, and overfitting with smaller datasets. In response, we introduce a novel Time Series Lightweight Adaptive Network (TSLANet), as a universal convolutional model for diverse time series tasks. Specifically, we propose an Adaptive Spectral Block, harnessing Fourier analysis to enhance feature representation and to capture both long-term and short-term interactions while mitigating noise via adaptive thresholding. Additionally, we introduce an Interactive Convolution Block and leverage self-supervised learning to refine the capacity of TSLANet for decoding complex temporal patterns and improve its robustness on different datasets. Our comprehensive experiments demonstrate that TSLANet outperforms state-of-the-art models in various tasks spanning classification, forecasting, and anomaly detection, showcasing its resilience and adaptability across a spectrum of noise levels and data sizes. The code is available at https://github.com/emadeldeen24/TSLANet

A basic unanswered question in neural network training is: what is the best learning rate schedule shape for a given workload? The choice of learning rate schedule is a key factor in the success or failure of the training process, but beyond having some kind of warmup and decay, there is no consensus on what makes a good schedule shape. To answer this question, we designed a search procedure to find the best shapes within a parameterized schedule family. Our approach factors out the schedule shape from the base learning rate, which otherwise would dominate cross-schedule comparisons. We applied our search procedure to a variety of schedule families on three workloads: linear regression, image classification on CIFAR-10, and small-scale language modeling on Wikitext103. We showed that our search procedure indeed generally found near-optimal schedules. We found that warmup and decay are robust features of good schedules, and that commonly used schedule families are not optimal on these workloads. Finally, we explored how the outputs of our shape search depend on other optimization hyperparameters, and found that weight decay can have a strong effect on the optimal schedule shape. To the best of our knowledge, our results represent the most comprehensive results on near-optimal schedule shapes for deep neural network training, to date.

Quantum communication can enhance internet technology by enabling novel applications that are provably impossible classically. The successful execution of such applications relies on the generation of quantum entanglement between different users of the network which meets stringent performance requirements. Alongside traditional metrics such as throughput and jitter, one must ensure the generated entanglement is of sufficiently high quality. Meeting such performance requirements demands a careful orchestration of many devices in the network, giving rise to a fundamentally new scheduling problem. Furthermore, technological limitations of near-term quantum devices impose significant constraints on scheduling methods hoping to meet performance requirements. In this work, we propose the first end-to-end design of a centralized quantum network with multiple users that orchestrates the delivery of entanglement which meets quality-of-service (QoS) requirements of applications. We achieve this by using a centrally constructed schedule that manages usage of devices and ensures the coordinated execution of different quantum operations throughout the network. We use periodic task scheduling and resource-constrained project scheduling techniques, including a novel heuristic, to construct the schedules. Our simulations of four small networks using hardware-validated network parameters, and of a real-world fiber topology using futuristic parameters, illustrate trade-offs between traditional and quantum performance metrics.

Foundation models have triggered a paradigm shift in computer vision and are increasingly being adopted in remote sensing, particularly for multispectral imagery. Yet, their potential in hyperspectral imaging (HSI) remains untapped due to the absence of comprehensive and globally representative hyperspectral datasets. To close this gap, we introduce SpectralEarth, a large-scale multi-temporal dataset designed to pretrain hyperspectral foundation models leveraging data from the Environmental Mapping and Analysis Program (EnMAP). SpectralEarth comprises 538,974 image patches covering 415,153 unique locations from more than 11,636 globally distributed EnMAP scenes spanning two years of archive. Additionally, 17.5% of these locations include multiple timestamps, enabling multi-temporal HSI analysis. Utilizing state-of-the-art self-supervised learning (SSL) algorithms, we pretrain a series of foundation models on SpectralEarth. We integrate a spectral adapter into classical vision backbones to accommodate the unique characteristics of HSI. In tandem, we construct four downstream datasets for land-cover and crop-type mapping, providing benchmarks for model evaluation. Experimental results support the versatility of our models, showcasing their generalizability across different tasks and sensors. We also highlight computational efficiency during model fine-tuning. The dataset, models, and source code will be made publicly available.

Euclid is an ESA mission designed to constrain the properties of dark energy and gravity via weak gravitational lensing and galaxy clustering. It will carry out a wide area imaging and spectroscopy survey (EWS) in visible and near-infrared, covering roughly 15,000 square degrees of extragalactic sky on six years. The wide-field telescope and instruments are optimized for pristine PSF and reduced straylight, producing very crisp images. This paper presents the building of the Euclid reference survey: the sequence of pointings of EWS, Deep fields, Auxiliary fields for calibrations, and spacecraft movements followed by Euclid as it operates in a step-and-stare mode from its orbit around the Lagrange point L2. Each EWS pointing has four dithered frames; we simulate the dither pattern at pixel level to analyse the effective coverage. We use up-to-date models for the sky background to define the Euclid region-of-interest (RoI). The building of the reference survey is highly constrained from calibration cadences, spacecraft constraints and background levels; synergies with ground-based coverage are also considered. Via purposely-built software optimized to prioritize best sky areas, produce a compact coverage, and ensure thermal stability, we generate a schedule for the Auxiliary and Deep fields observations and schedule the RoI with EWS transit observations. The resulting reference survey RSD_2021A fulfills all constraints and is a good proxy for the final solution. Its wide survey covers 14,500 square degrees. The limiting AB magnitudes (5σ point-like source) achieved in its footprint are estimated to be 26.2 (visible) and 24.5 (near-infrared); for spectroscopy, the H_α line flux limit is 2times 10^{-16} erg cm^{-2} s^{-1} at 1600 nm; and for diffuse emission the surface brightness limits are 29.8 (visible) and 28.4 (near-infrared) mag arcsec^{-2}.

Efficient operator scheduling is a fundamental challenge in software compilation and hardware synthesis. While recent differentiable approaches have sought to replace traditional ones like exact solvers or heuristics with gradient-based search, they typically rely on categorical distributions that fail to capture the ordinal nature of time and suffer from a parameter space that scales poorly. In this paper, we propose a novel differentiable framework, GauS, that models operator scheduling as a stochastic relaxation using Gaussian distributions, which fully utilize modern parallel computing devices like GPUs. By representing schedules as continuous Gaussian variables, we successfully capture the ordinal nature of time and reduce the optimization space by orders of magnitude. Our method is highly flexible to represent various objectives and constraints, which provides the first differentiable formulation for the complex pipelined scheduling problem. We evaluate our method on a range of benchmarks, demonstrating that Gaus achieves Pareto-optimal results.

Semidefinite programming is a fundamental problem class in convex optimization, but despite recent advances in solvers, solving large-scale semidefinite programs remains challenging. Generally the matrix functions involved are spectral or unitarily invariant, i.e., they depend only on the eigenvalues or singular values of the matrix. This paper investigates how spectral matrix cones -- cones defined from epigraphs and perspectives of spectral or unitarily invariant functions -- can be used to enhance first-order conic solvers for semidefinite programs. Our main result shows that projecting a matrix can be reduced to projecting its eigenvalues or singular values, which we demonstrate can be done at a negligible cost compared to the eigenvalue or singular value decomposition itself. We have integrated support for spectral matrix cone projections into the Splitting Conic Solver (SCS). Numerical experiments show that SCS with this enhancement can achieve speedups of up to an order of magnitude for solving semidefinite programs arising in experimental design, robust principal component analysis, and graph partitioning.

This paper studies sequence modeling for prediction tasks with long range dependencies. We propose a new formulation for state space models (SSMs) based on learning linear dynamical systems with the spectral filtering algorithm (Hazan et al. (2017)). This gives rise to a novel sequence prediction architecture we call a spectral state space model. Spectral state space models have two primary advantages. First, they have provable robustness properties as their performance depends on neither the spectrum of the underlying dynamics nor the dimensionality of the problem. Second, these models are constructed with fixed convolutional filters that do not require learning while still outperforming SSMs in both theory and practice. The resulting models are evaluated on synthetic dynamical systems and long-range prediction tasks of various modalities. These evaluations support the theoretical benefits of spectral filtering for tasks requiring very long range memory.

We introduce Mosaic, a probabilistic weather forecasting model that addresses two distinct failure modes of spectral degradation in ML-based weather prediction: (1) spectral damping caused by deterministic training against ensemble means; and (2) aliasing artifacts caused by compressive encoding onto a coarse latent grid. Mosaic generates ensemble members through learned functional perturbations and operates on native-resolution grids via mesh-aligned block-sparse attention, a hardware-aligned mechanism that captures long-range dependencies at linear cost by sharing keys and values across spatially adjacent queries. At 1.5° resolution with 214M parameters, Mosaic matches or outperforms models trained on 6times finer resolution on key variables and achieves state-of-the-art results among 1.5° models, producing well-calibrated ensembles whose individual members exhibit near-perfect spectral alignment across all resolved frequencies. A 24-member, 10-day forecast takes under 12\,s on a single H100~GPU. Code is available at https://github.com/maxxxzdn/mosaic.

Time-domain surveys such as the Zwicky Transient Facility (ZTF) have opened a new frontier in the discovery and characterization of transients. While photometric light curves provide broad temporal coverage, spectroscopic observations remain crucial for physical interpretation and source classification. However, existing spectral analysis methods -- often reliant on template fitting or parametric models -- are limited in their ability to capture the complex and evolving spectra characteristic of such sources, which are sometimes only available at low resolution. In this work, we introduce SpectraNet, a deep convolutional neural network designed to learn robust representations of optical spectra from transients. Our model combines multi-scale convolution kernels and multi-scale pooling to extract features from preprocessed spectra in a hierarchical and interpretable manner. We train and validate SpectraNet on low-resolution time-series spectra obtained from the Spectral Energy Distribution Machine (SEDM) and other instruments, demonstrating state-of-the-art performance in classification. Furthermore, in redshift prediction tasks, SpectraNet achieves a root mean squared relative redshift error of 0.02, highlighting its effectiveness in precise regression tasks as well.