Daily Papers

Speculative decoding has emerged as a widely adopted method to accelerate large language model inference without sacrificing the quality of the model outputs. While this technique has facilitated notable speed improvements by enabling parallel sequence verification, its efficiency remains inherently limited by the reliance on incremental token generation in existing draft models. To overcome this limitation, this paper proposes an adaptation of speculative decoding which uses discrete diffusion models to generate draft sequences. This allows parallelization of both the drafting and verification steps, providing significant speed-ups to the inference process. Our proposed approach, Speculative Diffusion Decoding (SpecDiff), is validated on standard language generation benchmarks and empirically demonstrated to provide a up to 8.7x speed-up over standard generation processes and up to 2.5x speed-up over existing speculative decoding approaches.

Speculative decoding is a technique that accelerates the inference speed of autoregressive large language models (LLMs) by sampling from a faster, lower quality draft model. Traditionally, a fundamental characteristic of speculative decoding is that it is lossless with respect to the verifier distribution, guaranteeing speed without sacrificing quality. This differs from recently developed diffusion LLMs (dLLMs), which are notably able to achieve substantial speedups by degrading the quality of their outputs with less diffusion effort. Because diffusion models are able to sample faster than autoregressive models by generating tokens in parallel, they are considered strong candidates for draft models in speculative diffusion. While it is widely understood that diffusion models can sacrifice quality for speed, speculative decoding itself can also be generalized to generate lossy samples faster using more lenient acceptance criteria with respect to the verifier distribution. Presented with the two parameters of diffusion effort and speculative decoding leniency, this paper explores the full achievable Pareto frontier via joint variations of these parameters. Our experiments show that jointly varying diffusion effort and acceptance leniency can extend the speed-quality Pareto frontier over single step diffusion drafting.

Speculative decoding losslessly accelerates autoregressive language models by verifying multiple draft tokens in parallel. Diffusion-based drafters further reduce proposal latency by predicting an entire token block in parallel, but their position-wise distributions are marginal rather than conditioned on tokens selected along each draft path. Existing recurrent correction incorporates causal information along a single draft chain, whereas diffusion-based tree construction broadens candidate coverage without carrying this correction along individual branches. We introduce DARTree, a training-free speculative decoding method that extends a pretrained AR correction head from chains to trees. DARTree first constructs a fixed-width candidate tree by expanding and scoring all nodes at each depth in a single batch, and then only applies best-first pruning to select the verification tree, decoupling AR-head inference from sequential heap operations. Across seven math, code, and chat benchmarks, DARTree achieves the highest average acceptance length and speedup in all four model--temperature configurations, accepting up to 12.97 tokens per verification round, 98.6\% more than DFlash and 27.9\% more than Domino in the same setting, and reaching up to 9.73times lossless speedup over locally measured autoregressive decoding.

Block diffusion speculative decoding accelerates LLM inference by predicting all tokens within a block simultaneously for the target model to verify in parallel. Predicting an entire block at once requires a sufficiently capable draft model and effective utilization of the target model's internal knowledge. However, the state-of-the-art method DFlash constrains all draft layers to share a single fused representation derived from only a few target layers, limiting per-layer expressiveness and hindering further scaling of draft capacity. In this paper, we present \modelname, which flares out the narrow conditioning bottleneck of DFlash through a lightweight layer-wise fusion mechanism: each draft layer attends to its own learnable combination of a broad set of target layers at negligible overhead, simultaneously injecting richer target knowledge and providing every draft layer with a distinct input. This enhanced per-layer expressiveness enables scaling the draft model to deeper architectures with consistent gains. We further scale training data from 800K to 2.4M samples to fully exploit the enlarged capacity. On six benchmarks spanning mathematical reasoning, code generation, and conversation, \modelname attains average wall-clock speedups of 5.52x on Qwen3-4B, 5.46x on Qwen3-8B, and 3.91x on GPT-OSS-20B, improving over DFlash by roughly 11\%, 8\%, and 5\% respectively. Our code is available at https://github.com/Tencent/AngelSlim.

Block diffusion accelerates speculative decoding by drafting multiple tokens in one forward pass. However, each position predicts a marginal distribution without observing earlier proposed tokens, limiting draft quality and acceptance length. We identify a concrete failure, the repetition trap, in which neighboring positions produce redundant copies of the same token. We explain this tendency theoretically and empirically examine its association with shorter accepted drafts. Recent methods refine marginal predictions with an additional causal head or a separately trained drafter, increasing parameter storage and introducing separate training objectives. We instead propose D-Loop, which introduces intra-block causal conditioning within the original diffusion drafter without additional model components. Inspired by semi-autoregressive generation and parameter sharing, D-Loop reuses the same backbone across looped passes. The first pass proposes a block, and the second conditions on a selected prefix to regenerate the suffix in parallel. A complementary prefix--suffix objective trains the shared drafter for both anchor-only prefix prediction and prefix-conditioned suffix prediction. Across eight math, code, and chat benchmarks, D-Loop can beat DFlash and DSpark on Qwen3-4B and Qwen3-8B with obvious gains.

Speculative decoding is an effective and lossless approach for accelerating LLM inference. However, existing widely adopted model-based draft designs, such as EAGLE3, improve accuracy at the cost of multi-step autoregressive inference, resulting in high drafting latency and ultimately rendering the drafting stage itself a performance bottleneck. Inspired by diffusion-based large language models (dLLMs), we propose DART, which leverages parallel generation to reduce drafting latency. DART predicts logits for multiple future masked positions in parallel within a single forward pass based on hidden states of the target model, thereby eliminating autoregressive rollouts in the draft model while preserving a lightweight design. Based on these parallel logit predictions, we further introduce an efficient tree pruning algorithm that constructs high-quality draft token trees with N-gram-enforced semantic continuity. DART substantially reduces draft-stage overhead while preserving high draft accuracy, leading to significantly improved end-to-end decoding speed. Experimental results demonstrate that DART achieves a 2.03x--3.44x wall-clock time speedup across multiple datasets, surpassing EAGLE3 by 30% on average and offering a practical speculative decoding framework. Code is released at https://github.com/fvliang/DART.

Diffusion-based Large Language Models (dLLMs) have emerged as a competitive alternative to autoregressive models, offering unique advantages through bidirectional attention and parallel generation paradigms. However, the generation results of current parallel decoding methods deviate from stepwise decoding, introducing potential performance degradation, which limits their practical deployment. To address this problem, we propose Self Speculative Decoding (SSD), a lossless inference acceleration method that leverages the dLLM itself as both speculative decoding drafter and verifier without auxiliary modules. SSD introduces a self-drafting mechanism where the model generates predictions for multiple positions, then verifies them through hierarchical verification trees in a single forward pass. Unlike traditional speculative decoding that requires separate draft models, SSD eliminates model redundancy and memory overhead by exploiting the dLLM's inherent parallel prediction capability for multiple positions. This self-speculative approach allows the model to progressively verify and accept multiple tokens in a single forward pass. Our experiments demonstrate that SSD achieves up to 3.46times speedup while keeping the output identical to stepwise decoding on open source models such as LLaDA and Dream. Code will be made publicly available on GitHub.

Speculative decoding accelerates inference by using a lightweight draft model to generate candidate tokens in parallel, and are then verified by the target model, enabling lossless acceleration. Recently, diffusion-based speculative decoding further improves parallelism by generating multiple tokens per forward pass via block-level diffusion, achieving state-of-the-art (SOTA) performance. However, existing methods adopt a fixed inference block size and assume a uniform optimal decoding strategy across all inputs. In this paper, we show that this assumption is suboptimal, as the optimal block size varies across samples and plays a critical role in speculative decoding performance. Moreover, these values exhibit a clear local structure, concentrating around the training block size, which reduces the problem to a low-dimensional and structured decision space. Based on these insights, we propose BlockPilot, a sample-adaptive policy that predicts the optimal block size from the prefilling representation. Specifically, we formulate block size selection as a lightweight policy learning problem and propose an instance-adaptive decision mechanism that predicts the optimal block size based on the representation of the prefilling stage. The prediction is performed only once after prefilling, allowing for seamless integration. Extensive experiments demonstrate that our method is plug-and-play, introduces minimal overhead, and consistently improves efficiency, achieving an acceptance length of 5.92 and a 4.20times speedup on Qwen3-4B under temperature T=1.

Diffusion large language models (dLLMs) have recently emerged as a promising alternative to autoregressive (AR) LLMs, offering faster inference through parallel or blockwise decoding. However, their masked language modeling formulation remains incompatible with standard token-level speculative decoding, one of the most effective acceleration techniques for AR models. In AR decoding, the causal mask preserves temporally valid token-level contexts, enabling a target model to verify multiple drafted tokens in a single forward pass. In contrast, dLLMs rely on mask tokens and bidirectional attention, causing the effective context to change across denoising steps and preventing direct token-level speculative verification. To bridge this gap, we propose a simple but effective speculative decoding algorithm for diffusion language models, named SimSD, which mainly adopts a plug-and-play masking strategy that equips dLLMs with temporally valid token-level contexts for speculative decoding. Our method explicitly introduces reference tokens from draft-model predictions and designs an attention mask that regulates their interaction with current-step tokens, allowing dLLMs to compute valid logits for drafted tokens in a single forward pass. This restores the key verification ability provided by causal masking in AR models while preserving the parallel decoding advantages of dLLMs. The proposed method is training-free and can be flexibly integrated with other acceleration techniques such as KV cache and blockwise decoding. Experiments on SDAR-family dLLMs across four benchmarks show that our method achieves up to 7.46x higher decoding throughput while maintaining and even improving average generation quality.

Diffusion-based language models (dLLMs) enable parallel token generation through iterative denoising, but existing decoding strategies collapse to single-token generation under low confidence, severely limiting throughput. Unlike autoregressive models where speculative decoding operates on token sequences in a fixed left-to-right order, dLLMs require speculating over denoising trajectories-sequences of multi-token updates with explicit positions and unmasking orders. We develop a trajectory-level speculative framework that constructs draft denoising trajectories via confidence-stratified tree exploration and verifies them through blockwise parallel evaluation with bidirectional attention masking. Our method further introduces inter-block speculation, exploiting diffusion models' bidirectional structure to perform cross-block lookahead. We formally characterize when this approach is exact and identify trajectory drift as the fundamental cost of increased parallelism. Building on Fast-dLLM's dual-cache infrastructure, our framework reduces denoising iterations by 30-40% and increases tokens-per-step from 2.6 to 4.3, achieving 7-14x speedup over vanilla dLLMs and 1.3x over Fast-dLLM with less than 1% accuracy change across reasoning and code benchmarks.

Diffusion language models (DLMs) promise parallel text generation, but in practice face an unresolved speed-quality trade-off. Exact decoding fills in only one masked position per model pass, while faster multi-token decoding schemes are lossy. Speculative decoding is the standard lossless acceleration for autoregressive models. However, it does not transfer directly to DLMs, which must choose both what to generate and where. We show that this order is the missing piece: the model's own predictions from the previous pass already give the right token at over 90% of positions, but not which position comes next. We introduce Speculating Positions Order Trajectory (SPOT), a 0.62M-parameter model that reads only the target's output distributions, predicts this order and proposes a tree of candidate continuations, which the target verifies in a single pass by state equality. Coupled-noise match, which shares Gumbel noise between drafter and target, keeps this verification exact at any temperature. This approach also inspired us to introduce SPOT-Sets for dynamic threshold decoding, where a pass commits several positions: SPOT-Sets drafts whole commit sets together with their tokens. Our comprehensive experiments show that SPOT cuts target passes by up to 6.8times and reaches up to 3.4times the throughput of standard decoding on SDAR-8B, matching or beating the calibrated and training-free drafting baselines in every task and budget at T=0 and T=1. In addition, we show that SPOT's learned drafter transfers across models, demonstrating successful transfer across six different DLMs; with a light calibration, the SPOT-Sets drafter transfers as well. On top of dynamic threshold decoding, SPOT-Sets improves the throughput of SDAR-8B by 59% on average over the threshold decoder alone. Project page: https://eliezer318.github.io/SPOT-dLLM/

Speculative decoding accelerates large language model inference through parallel verification of tokens proposed by a drafter. Diffusion drafters further parallelize proposal generation, but greater proposal capacity or higher mean accepted tokens (MAT) need not yield higher throughput. Because verification accepts only a consecutive prefix, early rejections can render later correct predictions ineffective, limiting MAT gains, while even higher MAT may not improve throughput if per-round latency increases. We introduce DScout, which uses two complementary factorizations to guide diffusion drafter training and inference for higher throughput. For training, DScout factorizes position-wise loss into inclusion, weighting, and prediction loss. This guides the design and combination of mixed-horizon training, intra-block unmasking, and acceptance-weighted loss to align supervision with prefix acceptance and improve MAT. For inference, DScout factorizes throughput as the ratio of MAT to per-round latency, guiding target-conditioning depth, drafter depth, and inference block size selection to identify a high-throughput configuration for each workload. Across six benchmarks, DScout achieves 3.84times and 4.14times mean speedups over autoregressive decoding on Qwen3-4B and Qwen3-8B, respectively, improving mean speedup over the state-of-the-art baseline by 9.1% and 7.1%. Across models and concurrency settings, our inference configuration policy provides up to 9.75% additional mean speedup over DScout's fixed configuration.

Diffusion Large Language Models (dLLMs) offer fast, parallel token generation, but their standalone use is plagued by an inherent efficiency-quality tradeoff. We show that, if carefully applied, the attributes of dLLMs can actually be a strength for drafters in speculative decoding with autoregressive (AR) verifiers. Our core insight is that dLLM's speed from parallel decoding drastically lowers the risk of costly rejections, providing a practical mechanism to effectively realize the (elusive) lengthy drafts that lead to large speedups with speculative decoding. We present FailFast, a dLLM-based speculative decoding framework that realizes this approach by dynamically adapting its speculation length. It "fails fast" by spending minimal compute in hard-to-speculate regions to shrink speculation latency and "wins big" by aggressively extending draft lengths in easier regions to reduce verification latency (in many cases, speculating and accepting 70 tokens at a time!). Without any fine-tuning, FailFast delivers lossless acceleration of AR LLMs and achieves up to 4.9times speedup over vanilla decoding, 1.7times over the best naive dLLM drafter, and 1.4times over EAGLE-3 across diverse models and workloads. We open-source FailFast at https://github.com/ruipeterpan/failfast.

Using a diffusion model for parallel drafting is a promising approach for speculative decoding. By predicting tokens at multiple future positions in a single forward pass, diffusion drafters substantially reduce drafting latency. However, this shifts the bottleneck to verification: verifying a single sequence limits acceptance length, while verifying large draft trees incurs excessive target-model latency. We identify a key mismatch in existing draft-tree methods: existing diffusion-tree methods rank nodes by the marginal probability, ignoring that verification is prefix-conditioned. As a result, they may verify unreachable descendants of rejected prefixes, increasing latency with limited acceptance gains. To address this, we propose TAPS, a target-aware prefix selection method that turns diffusion marginals into path-conditioned acceptance estimates. TAPS then selects a compact prefix-closed subtree under a fixed verification budget, improving the acceptance-cost tradeoff rather than simply expanding the draft tree. Experiments across diverse datasets and model families demonstrate that TAPS achieves up to 7.9x lossless end-to-end speedup over vanilla autoregressive decoding, outperforming state-of-the-art DFlash and DDTree by 1.36x and 1.74x respectively. Our work is available at https://anonymous.4open.science/r/TAPS-EMNLP2026-53DD

Speculative decoding, in which a lightweight draft model first generates a draft sequence that is then verified in parallel by the target model, has become a prevalent paradigm for accelerating large language model inference. Recent work such as DFlash further boosts drafting efficiency by leveraging diffusion drafters, whose parallel denoising mechanism enables draft generation in a single forward pass. In this work, we uncover a central pitfall of diffusion drafters: bidirectional attention is a double-edged sword. On one hand, it endows the model with parallel generation and global contextual modeling capabilities; on the other hand, this inherent global dependency introduces high variance at both the domain-level and the token-level: acceptance rates fluctuate substantially across different domains, and draft token quality also varies heterogeneously at different token positions. To tackle this issue, we propose AdaFlash framework, comprising two components: (i) an on-policy distillation (OPD) algorithm with reverse-KL divergence tailored for diffusion drafters, bringing stable convergence and effectively reducing domain-level variance; and (ii) an adaptive length head that dynamically adjusts the candidate sequence length on the fly, substantially lowering the verification cost of the target model and handling token-level variance. Experiments demonstrate that AdaFlash consistently improves speedup rate during deployment, with especially significant gains in high-concurrency scenarios, achieving up to approximately 66% higher throughput than previous state-of-the-art methods.

Diffusion large language models (DLLMs) generate text through iterative block denoising, and multi-branch speculative decoding accelerates this process by verifying a main branch together with multiple draft branches in a single forward pass. While prior DLLM acceleration methods primarily exploit temporal redundancy across denoising steps, we identify a complementary redundancy axis within each speculative verification step: multi-branch computational redundancy. During speculative verification, draft branches inherit most tokens from their parents while unmasking a small set of additional positions, causing large portions of hidden states to remain highly similar across branches. We propose SpecFold, an algorithm-system co-design that exploits this multi-branch redundancy to reduce the cost of multi-branch speculative verification. Algorithmically, SpecFold performs token-level residual gating and selectively reuses parent computation through folded attention and FFN while preserving residual hidden states. Systemically, a Triton kernel implementation translates this fine-grained reuse into end-to-end throughput gains through efficient sparse multi-branch execution. SpecFold is orthogonal to temporal caching and compatible with existing DLLM speculation strategies. Across two DLLM families, five models, and five standard benchmarks, SpecFold achieves up to 1.64x throughput over Spiffy and up to 1.99x over vanilla decoding, while maintaining comparable task performance.

The autoregressive nature of large language models (LLMs) remains a significant bottleneck for inference, particularly in complex agentic workloads. While speculative decoding (SD) accelerates inference, current approaches rely on static drafting paradigms, utilising either autoregressive drafting models for reasoning or diffusion-based parallel drafting models for structured outputs. We empirically find that drafting accuracy fluctuates dramatically within a single sequence, leaving significant performance unrealised by static paradigms and coarse-grained routing. To address this volatility, we introduce WhiFlash, the first cross-paradigm SD method that unifies autoregressive and diffusion-based parallel drafting under a single token-level controller. WhiFlash adopts a fine-grained routing mechanism that employs either a lightweight entropy-based or a learned neural policy, both parametrised to provide a tunable balance between expected token gain and latency. To make high-frequency switching computationally viable, we introduce novel cache-management optimisations, Lazy Catch-up and KV-only Prefill, reducing switching overhead to below 7% of per-round latency. By capitalising on the complementary strengths of fundamentally distinct drafting architectures, WhiFlash achieves significantly higher acceptance lengths, yielding category-specific throughput gains of up to 69.6% over the state-of-the-art autoregressive EAGLE-3 and 37.3% over the diffusion-based DFlash.

Autoregressive language models generate text one token at a time, yet natural language is inherently structured in multi-token units, including phrases, n-grams, and collocations that carry meaning jointly. This one-token bottleneck limits both the expressiveness of the model during pre-training and its throughput at inference time. Existing remedies such as speculative decoding or diffusion-based language models either leave the underlying bottleneck intact or sacrifice the causal structure essential to language modeling. We propose BitLM, a language model that represents each token as a fixed-length binary code and employs a lightweight diffusion head to denoise multiple tokens in parallel within each block. Crucially, BitLM preserves left-to-right causal attention across blocks while making joint lexical decisions within each block, combining the reliability of autoregressive modeling with the parallelism of iterative refinement. By replacing the large-vocabulary softmax with bitwise denoising, BitLM reframes token generation as iterative commitment in a compact binary space, enabling more efficient pre-training and substantially faster inference without altering the causal foundation that makes language models effective. Our results demonstrate that the one-token-at-a-time paradigm is not a fundamental requirement but an interface choice, and that changing it can yield a stronger and faster language model. We hope BitLM points toward a promising direction for next-generation language model architectures.

Speculative decoding accelerates LLM inference by having a small drafter propose tokens that a larger target model verifies in parallel. Recent diffusion-based parallel drafters such as DFlash predict the full B-token block in one forward pass, enabling deeper drafters and longer accepted blocks. However, existing multi-token drafter objectives often use fixed position-dependent weighting schedules, such as head-dependent weights or block-position decays, which do not adapt as the positions limiting acceptance change during training. To address this, we derive per-position training weights from a differentiable surrogate of expected accepted draft length, matching the weight of each position to its log-probability gradient contribution. The resulting loss, D-PACE (Dynamic Position-Aware Cross-Entropy), shifts training signal toward positions that currently limit acceptance as the drafter improves. Across six benchmarks, two Qwen3-4B draft depths, two decoding temperatures, and two additional target models, D-PACE consistently improves both wall-clock speedup and average emitted length, with 2.3\% measured training-time overhead and no changes to the drafter architecture or inference procedure.

Speculative decoding accelerates large language model inference by using a lightweight drafter to propose multiple tokens that are subsequently verified in parallel by the target model. Recent diffusion-based drafters make this paradigm particularly attractive: deep attention-based neural backbones provide strong predictions, while drafting multiple future positions in parallel avoids the sequential cost of autoregressive generation. This parallelism, however, comes at a cost. Tokens within a draft block are predicted without access to the realized identities of preceding draft tokens, removing intra-block dependencies that would naturally be available under autoregressive generation. We introduce DCOCO (DFlash Contextual Corrector), a lightweight mechanism that restores these dependencies while preserving parallel drafting. Rather than committing to each position's top prediction, DCOCO retains multiple candidate tokens and evaluates their contextual compatibility across adjacent draft positions in parallel, enabling contextually informed token selection at low additional cost. Across four verifier backbones and ten benchmarks, DCOCO achieves the highest average throughput in every evaluated configuration, spanning greedy and stochastic decoding with and without extended reasoning, with speedups of up to 6.6x over vanilla decoding. Its advantage persists under concurrent serving: DCOCO outperforms the strongest competing method by 6-23% across 4-32 concurrent requests, while other sequential correctors fall below uncorrected DFlash at these loads. These results demonstrate that recovering intra-block dependencies through parallel contextual scoring delivers consistent acceleration across decoding regimes and serving loads.

Autoregressive (AR) language modeling is the dominant paradigm for text generation, yet its sequential token-by-token decoding makes inference memory-bound and inefficient. Existing acceleration approaches, such as speculative decoding and diffusion language models, can yield speedups under certain conditions but do not directly address high-load batch serving--the scenario most critical for industrial-scale deployment. We introduce K-Forcing, a push-forward language modeling paradigm for joint next-k-token decoding. K-Forcing distills an existing AR model into a conditional push-forward mapping--one that transforms independent uniform noise variables into a joint sample of multiple future tokens in a single forward pass. This design preserves fixed-length outputs, reuses the AR teacher backbone, and remains compatible with standard AR serving infrastructure. We train this mapping via progressive self-forcing distillation, which gradually expands the prediction window while enabling the student to closely match the sequence distribution of the AR teacher. We evaluate K-Forcing on LM1B and OpenWebText using a standard causal Transformer backbone. When aggressively configured to generate k = 4 tokens per forward pass, K-Forcing delivers approximately 2.4-3.5x speedup across different batch sizes, while incurring modest quality degradation relative to its AR teacher. As inference increasingly dominates the lifetime compute cost of modern LLMs, K-Forcing offers a promising route toward accelerating AR generation under real-world high-load deployment.

As large language models (LLMs) scale up, accuracy improves, but the autoregressive (AR) nature of decoding increases latency since each token requires a serial forward pass. Speculative decoding addresses this by employing a fast drafter to propose multi-token drafts, which are then verified in parallel by the target model. However, many deployments still rely on AR drafters, where sequential passes limit wall-clock gains. We revisit the drafting stage and present DiffuSpec, a training-free drop-in framework that uses a pretrained diffusion language model (DLM) to produce multi-token drafts in a single forward pass, while remaining compatible with standard AR verifiers. Because DLM drafts are generated under bidirectional conditioning, parallel per-position candidates form a token lattice in which the locally highest-probability token at each position need not form a causal left-to-right path. Moreover, DLM drafting requires pre-specifying a draft length, inducing a speed-quality trade-off. To address these challenges, we introduce two practical components: (i) a causal-consistency path search (CPS) over this lattice that extracts a left-to-right path aligned with AR verification; and (ii) an adaptive draft-length (ADL) controller that adjusts next proposal size based on recent acceptance feedback and realized generated length. Across benchmarks, DiffuSpec yields up to 3x wall-clock speedup, establishing diffusion-based drafting as a robust alternative to autoregressive drafters for speculative decoding.

Autoregressive large language models (LLMs) deliver strong performance but require inherently sequential decoding, leading to high inference latency and poor GPU utilization. Speculative decoding mitigates this bottleneck by using a fast draft model whose outputs are verified in parallel by the target LLM; however, existing methods still rely on autoregressive drafting, which remains sequential and limits practical speedups. Diffusion LLMs offer a promising alternative by enabling parallel generation, but current diffusion models typically underperform compared with autoregressive models. In this paper, we introduce DFlash, a speculative decoding framework that employs a lightweight block diffusion model for parallel drafting. By generating draft tokens in a single forward pass and conditioning the draft model on context features extracted from the target model, DFlash enables efficient drafting with high-quality outputs and higher acceptance rates. Experiments show that DFlash achieves over 6x lossless acceleration across a range of models and tasks, delivering up to 2.5x higher speedup than the state-of-the-art speculative decoding method EAGLE-3.

Speculative decoding has become the standard approach for accelerating Large Language Model (LLM) inference. It exploits a lossless draft-then-verify procedure to circumvent the latency of autoregressive decoding, achieving impressive speed-ups. Yet, current speculative decoding approaches remain limited by two fundamental bottlenecks: (1) the autoregressive dependency during drafting which limits parallelism, and (2) frequent rejections of draft tokens caused by misalignment between the draft and verify models. This paper proposes SpecDiff-2, a novel framework to jointly address these two bottlenecks. It leverages discrete diffusion as a non-autoregressive drafter to address bottleneck (1) and develops novel techniques to calibrate discrete diffusion drafters with autoregressive verifiers, addressing bottleneck (2). Experimental results across a comprehensive benchmark suite show that SpecDiff-2 achieves a new state-of-the-art across reasoning, coding, and mathematical benchmarks, improving tokens-per-second by up to an average of +55% over previous baselines and obtaining up to 5.5x average speed-up over standard decoding, without any loss of accuracy.

Speculative decoding accelerates autoregressive language models by using a lightweight drafter to propose multiple future tokens, which the target model then verifies in parallel. DFlash shows that a block diffusion drafter can generate an entire draft block in a single forward pass and achieve state-of-the-art speculative decoding performance, outperforming strong autoregressive drafters such as EAGLE-3. Vanilla DFlash, however, still verifies only a single drafted trajectory per round, potentially limiting its acceptance length. We introduce DDTree (Diffusion Draft Tree), a method that constructs a draft tree directly from the per-position distributions of a block diffusion drafter. Under a fixed node budget, DDTree uses a simple best-first heap algorithm to select the continuations that are most likely to match the target model according to a surrogate defined by the draft model's output. The resulting tree is verified efficiently in a single target model forward pass using an ancestor-only attention mask. Because DDTree builds on DFlash, a leading draft model for speculative decoding, these gains place DDTree among the leading approaches to speculative decoding.

Diffusion-based vision-language-action models (dVLAs) are promising for embodied intelligence but are fundamentally limited in real-time deployment by the high latency of full inference. We propose Realtime-VLA FLASH, a speculative inference framework that eliminates most full inference calls during replanning by introducing a lightweight draft model with parallel verification via the main model's Action Expert and a phase-aware fallback mechanism that reverts to the full inference pipeline when needed. This design enables low-latency, high-frequency replanning without sacrificing reliability. Experiments show that on LIBERO, FLASH largely preserves task performance by replacing many 58.0 ms full-inference rounds with speculative rounds as fast as 7.8 ms, lowering task-level average inference latency to 19.1 ms (3.04x speedup). We additionally demonstrate effectiveness on real-world conveyor-belt sorting, highlighting its practical impact for latency-critical embodied tasks.

Block-diffusion drafters like dFlash generate an entire block of draft tokens in a single forward pass, drastically reducing the overhead of multiple-token drafting in speculative decoding. The crucial final step of the single-pass discrete denoising process involves using the logit distribution at each position to sample conditionally independent tokens. The resulting draft is thus a set of per-position marginals, rather than a joint distribution: no draft token is guaranteed to depend on its predecessors. Such independently sampled marginals tend to produce sequences with tokens that are individually likely, but jointly improbable under the target model's distribution, which verifies each token conditionally. This can cause early rejection and limits acceptance length. To address this, we propose xPress as a means to restore the missing causality in diffusion drafters. xPress is a lightweight causal refiner that reconciles the whole diffusion block at once through parallel refinement, restoring and propagating causal dependencies across the draft without a token-by-token loop. On Qwen3-8B, across seven math, code, and chat benchmarks, xPress raises acceptance length by about 30% on average (up to +56%) and its end-to-end decoding throughput by about 1.3 on average (up to 1.7) compared to the original dFlash diffusion drafter.

Autoregressive video diffusion is emerging as a promising paradigm for streaming video synthesis, with step distillation serving as the primary means of accelerating inference. Whether speculative decoding, the dominant acceleration strategy for large language models, can be effectively adapted to autoregressive video generation remains an open question, because video blocks are continuous spatiotemporal tensors with no token-level distribution for exact rejection sampling. We introduce SDVG, which brings speculative decoding to block-based autoregressive video diffusion by replacing token verification with an image-quality router. A 1.3B drafter proposes candidate blocks via four denoising steps; each block is VAE-decoded and scored by ImageReward using worst-frame aggregation--taking the minimum per-frame reward to catch single-frame artifacts that averaging would mask. Blocks scoring above a fixed threshold tau are accepted into the 14B target's KV cache; the rest are regenerated by the target. Two additional design choices prove critical: the first block is always force-rejected to anchor scene composition, and tau serves as a single knob that traces a smooth quality-speed Pareto frontier. On 1003 MovieGenVideoBench prompts (832x480), SDVG retains 98.1% of target-only VisionReward quality (0.0773 vs. 0.0788) at a 1.59x speedup with tau=-0.7, and reaches 2.09x at 95.7% quality retention--while consistently outperforming draft-only generation by over +17%. The framework is training-free, requires no architectural changes, and can be seamlessly integrated into existing autoregressive video generation pipelines.

Efficiency, as a critical practical challenge for LLM-driven agentic and reasoning systems, is increasingly constrained by the inherent latency of autoregressive (AR) decoding. Speculative decoding mitigates this cost through a draft-verify scheme, yet existing approaches rely on AR draft models (a.k.a., drafters), which introduce two fundamental issues: (1) step-wise uncertainty accumulation leads to a progressive collapse of trust between the target model and the drafter, and (2) inherently sequential decoding of AR drafters. Together, these factors cause limited speedups. In this paper, we show that a diffusion large language model (dLLM) drafters can naturally overcome these issues through its fundamentally different probabilistic modeling and efficient parallel decoding strategy. Building on this insight, we introduce DEER, an efficient speculative decoding framework that drafts with diffusion and verifies with AR models. To enable high-quality drafting, DEER employs a two-stage training pipeline to align the dLLM-based drafters with the target AR model, and further adopts single-step decoding to generate long draft segments. Experiments show DEER reaches draft acceptance lengths of up to 32 tokens, far surpassing the 10 tokens achieved by EAGLE-3. Moreover, on HumanEval with Qwen3-30B-A3B, DEER attains a 5.54x speedup, while EAGLE-3 achieves only 2.41x. Code, model, demo, etc, will be available at https://czc726.github.io/DEER/

The generation speed of LLMs are bottlenecked by autoregressive decoding, where tokens are predicted sequentially one by one. Alternatively, diffusion large language models (dLLMs) theoretically allow for parallel token generation, but in practice struggle to achieve the speed of autoregressive models without significantly sacrificing quality. We therefore introduce adaptive parallel decoding (APD), a novel method that dynamically adjusts the number of tokens sampled in parallel. We achieve this by defining a multiplicative mixture between the dLLM marginal probabilities and the joint probability of sequences under a small auxiliary autoregressive model. This inverts the standard setup of speculative decoding, where the goal is to sample from a large autoregressive verifier by drafting from a smaller model. We further optimize APD by enabling KV caching and limiting the size of the masked input. Altogether, our method puts forward three tunable parameters to flexibly tradeoff throughput and quality. We show that APD provides markedly higher throughput with minimal quality degradations on downstream benchmarks.

Block-diffusion language models offer a promising path toward faster-than-autoregressive generation by combining block-wise autoregressive decoding with within-block parallel denoising. However, in the few-step regime needed for practical acceleration, standard confidence-thresholded decoding is often brittle: aggressive thresholds hurt quality, while conservative thresholds require unnecessary denoising steps. Existing approaches that address this issue either require additional training or incur extra test-time compute. We present S2D2, a training-free self-speculative decoding framework for block-diffusion language models. Our key observation is that a block-diffusion model becomes autoregressive when the block size is reduced to one, allowing the same pretrained model to act as both drafter and verifier. S2D2 inserts a speculative verification step into standard block-diffusion decoding and uses lightweight routing policies to decide when verification is worth its cost. This yields a hybrid decoding trajectory in which diffusion proposes tokens in parallel, while the autoregressive mode acts as a local sequence-level critic. Across three mainstream block-diffusion families, S2D2 consistently improves the accuracy-speed tradeoff over strong confidence-thresholding baselines. On SDAR, we observe up to 4.7times speedup over autoregressive decoding, and up to 1.57times over a tuned dynamic decoding baseline while improving accuracy by up to 4.5 points. On LLaDA2.1-Mini, S2D2 remains complementary to built-in self-correction, including a conservative setting where it is 4.4times faster than the static baseline with slightly higher accuracy.

End-to-end autonomous driving via Vision-Language-Action (VLA) models demands a precarious balance between high-fidelity trajectory planning and efficient inference. Existing paradigms typically fall short: autoregressive (AR) VLAs are memory-bandwidth-bound on edge hardware and prone to exposure-bias drift, while full-sequence diffusion models preclude KV-cache reuse and suffer from "logical leakage" that violates the fundamental perceive-then-plan causality. We present Fast-dDrive, a block-diffusion VLA that performs bidirectional refinement within semantic units while enforcing strict causal ordering across them. Leveraging the observation that driving VLAs often emit structured JSON-like outputs, Fast-dDrive freezes structural tokens into a section scaffold and employs a section-aware training recipe that prioritizes safety-critical planning. We further introduce Scaffold Speculative Decoding to achieve AR-equivalent quality at significantly higher throughput. Finally, we propose a low-overhead test-time scaling scheme: by forking N stochastic trajectory rollouts from a single shared-prefix KV cache and averaging them, we effectively suppress prediction variance at a fractional computational cost. Empirical results demonstrate that Fast-dDrive redefines the speed-accuracy frontier for driving agents. On the WOD-E2E test set, Fast-dDrive achieves SOTA ADE@3s and ADE@5s, alongside the highest RFS among diffusion-based VLAs; on nuScenes, it reduces average L2 error to 0.32m (a 22% improvement). When integrated with SGLang, our framework delivers 12times throughput speedup over the AR baseline, narrowing the gap between high-capacity VLAs and the efficiency demands of real-time on-vehicle deployment.

Speculative decoding accelerates memory-bound LLM inference without quality degradation by using a fast drafter to propose multiple candidate tokens and the target model to verify them in parallel. However, conventional sequential speculative decoding suffers from mutual waiting between drafting and verification, and repeated exchange of intermediate states further increases memory access overhead. Parallel speculative decoding addresses this limitation by performing drafting and verification within a single target forward pass, allowing future drafts to be prepared while current candidates are being verified. Although effective at small batch sizes, existing parallel speculative decoding methods either require costly continual pretraining with quality degradation or suffer from low acceptance rates. More importantly, this paradigm inherently suffers from uncertainty in both the bonus token and the accepted length, leading to draft verification mismatch and causing throughput gains to collapse at large batch sizes. To address these limitations, we introduce FlexDraft, a lossless speculative decoding framework that flexibly adapts to varying batch sizes through three key designs. (1) Attention Tuning enables block diffusion drafting by tuning only the attention projectors of the final few layers on mask tokens, while keeping the autoregressive path frozen to preserve the target distribution and produce high quality drafts with minimal trainable parameters. (2) Bonus-guided Calibration uses a lightweight MLP conditioned on the resolved bonus token to calibrate draft logits, mitigating draft verification mismatch caused by bonus token uncertainty. (3) Flex Decoding dynamically switches between parallel draft and verify at small batch sizes and sequential draft then verify at large batch sizes, and adjusts verification length based on draft confidence to eliminate redundant computation.

Speculative decoding (SD) accelerates autoregressive Large Language Models (LLMs) by drafting multiple tokens and verifying them in parallel, but it faces a scaling limitation: increasing the draft budget improves speed only when acceptance remains high and drafting overhead stays low. This ceiling has been difficult to break because prior head-based SD methods face a causality-efficiency dilemma. Autoregressive drafters produce path-conditioned candidates that are effective for tree speculative decoding with higher acceptance length, but their drafting cost grows with tree depth. Bidirectional block-diffusion drafters generate all positions in one pass, but their branch-agnostic marginals can form individually plausible yet mutually inconsistent trees, wasting budget and reducing acceptance. We propose JetSpec, a head-based SD framework that combines one-forward drafting efficiency with branch-wise causal conditioning. JetSpec trains a causal parallel draft head over fused hidden states from the frozen target model, producing candidate trees whose scores align with the target model's autoregressive factorization. This enables JetSpec to convert larger draft budgets into longer accepted prefixes and higher end-to-end speedup. Across math, coding, and chat benchmarks on dense and MoE Qwen3 models, JetSpec consistently outperforms bidirectional-head and tree-based SD baselines. On H100 GPUs, JetSpec achieves up to 9.64x speedup on MATH-500 and 4.58x on open-ended conversational workloads, with further latency gains demonstrated through vLLM integration under realistic serving loads. Our code and models are available at https://github.com/hao-ai-lab/JetSpec.

Large Language Models (LLMs) owe much of their success to next-token prediction (NTP), but their autoregressive (AR) structure requires slow, sequential token generation. To overcome this bottleneck, we introduce diffusion-augmented LLMs, a new class of models that defines an AR model distribution while using diffusion to draw multiple tokens in parallel from that distribution. We decouple the parameters of these models into two sets: AR weights, trained using the standard NTP objective, and lightweight diffusion weights, trained to generate multiple tokens simultaneously. The diffusion weights are learned through a simple Diffusion Distillation phase that adds negligible overhead to existing LLM training pipelines. We also introduce Ψ-Spec, a family of samplers that enables lossless acceleration and inference-time scaling at a fixed context length. Unlike speculative decoding, our method requires no separate draft model. Unlike diffusion LLMs (d-LLMs), it accelerates generation without sacrificing the quality of the underlying AR model. The resulting models, called Uno, can be trained from scratch or built by augmenting existing open-weight AR LLMs. Uno achieves higher throughput than leading speculative-decoding methods at every evaluated batch size and delivers up to 3times speedups over the base AR model, including at the largest batch size supported by the device. Notably, our 8B Uno model outperforms the leading open d-LLM, the 26B DiffusionGemma, and the proprietary Mercury 2 across all evaluated benchmarks in agentic tool use, coding, and long-context reasoning. We release code and checkpoints at: https://s-sahoo.github.io/uno/

Orthrus is a hybrid autoregressive-diffusion architecture that accelerates autoregressive language-model inference by generating multiple tokens in parallel while using a frozen autoregressive backbone. Its central claim is that an intra-model consensus mechanism enables lossless speculative decoding, producing the same output sequence as the autoregressive model. We independently reproduce Orthrus and examine this claim under different numerical precisions. Under BF16 inference, exact trajectory matching occurs in only 45% of cases for the authors' checkpoint and 43% for our independently trained model across 1,190 prompts from 12 domains. The probability of exact matching is also strongly associated with the response-conditional perplexity of the reference model. Despite this trajectory divergence, Orthrus does not show systematic degradation on downstream lm-eval-harness benchmarks. In contrast, repeating the trajectory evaluation with FP32 yields exact trajectory matching on all evaluated prompts. These results show that the practical losslessness of Orthrus depends on numerical precision and that exact trajectory equivalence should be evaluated separately from downstream task performance.

Speculative decoding accelerates autoregressive LLMs by having a lightweight drafter propose tokens that the target model verifies in parallel. Diffusion-based drafters further reduce drafting latency by proposing multiple tokens at once. However, these tokens are predicted independently, so a single early error causes prefix verification to discard the rest of the draft, even when it contains useful downstream predictions. We introduce DEdit, a diffusion-based drafter that can not only draft by conventional parallel unmasking but also iteratively edit its draft through token-to-token predictions. Through editing, later predictions can serve as bidirectional context for repairing earlier errors and extending the accepted prefix. To teach the model to repair errors while preserving correct predictions, we propose ProposalMix, a training scheme that mixes draft predictions with ground-truth tokens based on first-pass confidence during training. Across seven benchmarks on Qwen3-4B and Qwen3-8B, DEdit achieves the highest macro-average token acceptance and speedup among the evaluated drafters, reaching macro-average speedups of 5.72times and 5.97times over autoregressive generation under greedy decoding, respectively. Further analysis shows that acceptance improves with more editing passes and wider drafting windows, and that ProposalMix halves harmful edits that shorten the accepted prefix. Moreover, restricting the editor to causal attention lowers acceptance, especially on highly predictable outputs, indicating that future context is a key source of these gains.

Speculative decoding accelerates language-model inference by drafting future tokens the target model verifies in parallel. A diffusion-style drafter such as DFlash drafts an entire block in one forward pass. It is trained on the per-position marginals rather than on the joint distribution over the block, so the tokens it emits are individually plausible yet jointly incoherent. We introduce LiLiCorr, a Lightweight Likelihood-based model that Correlates the per-position marginals such a drafter produces. It keeps the top-K tokens at each position and processes them jointly, emitting an in and an out vector for each. Two candidates at consecutive positions match when the earlier out vector aligns, in cosine similarity, with the later in vector. Training scores the correct pairings highest and pushes competing ones down, so coherent blocks outscore incoherent ones. The joint distribution over the block, exponential in its length, is never materialized. One lightweight network pass produces all the vectors, the pairwise scores follow as batched matrix operations, leaving only a cheap greedy walk sequential. We co-train the DFlash drafter with LiLiCorr, so it proposes candidates that correlate into longer accepted sequences. Over the vanilla DFlash drafter it builds on, LiLiCorr accepts more and serves faster at all 72 settings we test: nine benchmarks at two target sizes under greedy and temperature-one decoding, plus a throughput sweep over six concurrencies, two input lengths and three output-entropy tiers. It raises acceptance length by 7 to 19%, while its single-pass scoring head costs only about 3% of the per-block latency. Against three concurrently developed methods that also restore coherence at draft time, all equally optimized on a common stack, LiLiCorr holds the highest throughput in 63 of those settings, ties within a measured noise floor in 6, and trails in only 3.

In arbitrary-order language models, it is an open question how to sample tokens in parallel from the correct joint distribution. With discrete diffusion models, the more tokens they generate in parallel, the less their predicted distributions adhere to the originally learned data distribution, as they rely on a conditional independence assumption that only works with infinitesimally small timesteps. We find that a different class of models, any-subset autoregressive models (AS-ARMs), holds the solution. As implied by the name, AS-ARMs can generate tokens in any order, and in parallel. Moreover, AS-ARMs support parallelized joint probability density estimation, allowing them to correct their own parallel-generated token distributions, via our Any-Subset Speculative Decoding (ASSD) algorithm. ASSD provably enables generation of tokens from the correct joint distribution, with the number of neural network calls upper bounded by the number of tokens predicted. We empirically verify that ASSD speeds up language generation, without sacrificing quality. Furthermore, we provide a mathematically justified scheme for training AS-ARMs for generation, and show that AS-ARMs achieve state-of-the-art performance among sub-200M parameter models on infilling benchmark tasks, and nearly match the performance of models 50X larger on code generation. Our theoretical and empirical results indicate that the once-forgotten AS-ARMs are a promising direction of language modeling.

Block-diffusion language models are served at hand-picked operating points, such as acceptance thresholds, buffer depth, schedule, checkpoint and precision, and each point is chosen by its mean benchmark accuracy. However, a mean does not tell an operator how often a faster configuration fails on prompts that the slower one answers correctly. On the serving engine and its decode traces, the default commit rule already commits every fully resolved block, a static skip rule captures nearly all of the compute that allocation can save, and self-distillation on engine-decoded targets adds speed at unchanged accuracy. Larger speedups come from lower thresholds, which commit tokens that are still uncertain. We therefore present Redline, a finite-sample procedure that selects operating points, hand-picked or learned, from the correctness of their answers on calibration prompts. Redline keeps the reference-relative risk, the joint probability that the reference answers correctly and a candidate configuration does not, within a user-chosen budget with high probability, and deploys the fastest configuration that passes. It speeds up math at a smaller risk budget than code in both model families, and at a budget of ten percent it deploys a LLaDA2 math configuration that commits over a third more tokens in each forward. It also applies without modification to the acceptance rule of speculative decoding and to weight quantization. On the same calibration data, Redline stays within its stated failure probability, whereas each tolerance of a mean-accuracy rule either gains less speed for some model and task or exceeds the risk budget far more often for another. Code is available at https://github.com/js-lee-AI/Redline.

Speculative decoding accelerates generation without changing its output, but on vision-language models (VLMs) a self-reinforcing cycle holds it back. Because an autoregressive drafter pays a sequential pass for each drafted token, it must stay small and can ill afford to attend to the image at each pass. Prior work therefore compresses or hides the image, leaving the drafter weakest on the text the image determines. We present GLANCE, a one-pass block drafter that breaks this cycle on an unmodified VLM target. Its block-diffusion head drafts a whole block in one forward pass over the target's already fused vision-language states, reading the multimodal context once, however deep the draft. The target verifies a wide candidate tree in one pass and commits exactly its greedy output. In one production engine at a fixed round budget, GLANCE decodes up to 3.05 times faster than autoregressive decoding and outpaces the production EAGLE3-VL head on average and by about 11% on grounded tasks. An entropy law explains when drafting pays, predicting the longest accepted blocks on grounded tasks, where the target's next-token entropy is lowest. Our code is available at https://github.com/js-lee-AI/GLANCE.

Speculative decoding accelerates autoregressive inference by verifying multiple draft tokens in a single target forward pass. However, as the context grows, existing state-of-the-art drafters become increasingly expensive, eroding the very efficiency advantage they are designed to provide. We argue that this scaling is unnecessary. A standalone language model must grow with its prefix because it is solely responsible for every token it produces. A drafter, by contrast, only proposes candidates; the target catches and corrects every error before any token is committed. The drafter's decoding cost can therefore be made entirely independent of the prefix length. We introduce LongSpark, a block-diffusion drafter that achieves this by extracting fixed-size, multiscale views from the target's verification pass, thereby eliminating the need for a growing persistent state. Extensive evaluations demonstrate that LongSpark achieves state-of-the-art end-to-end efficiency across multiple model scales and realistic serving conditions. Notably, it delivers the lowest time-per-output-token on long-context tasks while reducing the drafter's context state by several orders of magnitude.

Speculative decoding accelerates large language model (LLM) inference by using a lightweight drafter to propose a block of tokens that the target model verifies in one parallel pass. Autoregressive drafters generate this block one token at a time, whereas block diffusion drafters such as DFlash generate it in one pass, making drafting faster. However, these diffusion drafters predict each token independently, ignoring dependencies between tokens in the block. We introduce FlashMap, a continuous flow drafter that conditions a flow map language model on the target model's hidden states and generates the whole block in one forward pass while capturing inter-token dependencies. On Qwen3-8B, FlashMap is faster than a matched DFlash baseline on every benchmark, with 7% higher average speedup and up to 6.1x lossless acceleration.

Continuous-valued Autoregressive (AR) image generation models have demonstrated notable superiority over their discrete-token counterparts, showcasing considerable reconstruction quality and higher generation fidelity. However, the computational demands of the autoregressive framework result in significant inference overhead. While speculative decoding has proven effective in accelerating Large Language Models (LLMs), their adaptation to continuous-valued visual autoregressive models remains unexplored. This work generalizes the speculative decoding algorithm from discrete tokens to continuous space. By analyzing the intrinsic properties of output distribution, we establish a tailored acceptance criterion for the diffusion distributions prevalent in such models. To overcome the inconsistency that occurred in speculative decoding output distributions, we introduce denoising trajectory alignment and token pre-filling methods. Additionally, we identify the hard-to-sample distribution in the rejection phase. To mitigate this issue, we propose a meticulous acceptance-rejection sampling method with a proper upper bound, thereby circumventing complex integration. Experimental results show that our continuous speculative decoding achieves a remarkable 2.33times speed-up on off-the-shelf models while maintaining the output distribution. Codes will be available at https://github.com/MarkXCloud/CSpD

Diffusion language models hold the promise of fast parallel generation, while autoregressive (AR) models typically excel in quality due to their causal structure aligning naturally with language modeling. This raises a fundamental question: can we achieve a synergy with high throughput, higher GPU utilization, and AR level quality? Existing methods fail to effectively balance these two aspects, either prioritizing AR using a weaker model for sequential drafting (speculative decoding), leading to lower drafting efficiency, or using some form of left-to-right (AR-like) decoding logic for diffusion, which still suffers from quality degradation and forfeits its potential parallelizability. We introduce TiDAR, a sequence-level hybrid architecture that drafts tokens (Thinking) in Diffusion and samples final outputs (Talking) AutoRegressively - all within a single forward pass using specially designed structured attention masks. This design exploits the free GPU compute density, achieving a strong balance between drafting and verification capacity. Moreover, TiDAR is designed to be serving-friendly (low overhead) as a standalone model. We extensively evaluate TiDAR against AR models, speculative decoding, and diffusion variants across generative and likelihood tasks at 1.5B and 8B scales. Thanks to the parallel drafting and sampling as well as exact KV cache support, TiDAR outperforms speculative decoding in measured throughput and surpasses diffusion models like Dream and Llada in both efficiency and quality. Most notably, TiDAR is the first architecture to close the quality gap with AR models while delivering 4.71x to 5.91x more tokens per second.

Autoregressive video models offer distinct advantages over bidirectional diffusion models in creating interactive video content and supporting streaming applications with arbitrary duration. In this work, we present Next-Frame Diffusion (NFD), an autoregressive diffusion transformer that incorporates block-wise causal attention, enabling iterative sampling and efficient inference via parallel token generation within each frame. Nonetheless, achieving real-time video generation remains a significant challenge for such models, primarily due to the high computational cost associated with diffusion sampling and the hardware inefficiencies inherent to autoregressive generation. To address this, we introduce two innovations: (1) We extend consistency distillation to the video domain and adapt it specifically for video models, enabling efficient inference with few sampling steps; (2) To fully leverage parallel computation, motivated by the observation that adjacent frames often share the identical action input, we propose speculative sampling. In this approach, the model generates next few frames using current action input, and discard speculatively generated frames if the input action differs. Experiments on a large-scale action-conditioned video generation benchmark demonstrate that NFD beats autoregressive baselines in terms of both visual quality and sampling efficiency. We, for the first time, achieves autoregressive video generation at over 30 Frames Per Second (FPS) on an A100 GPU using a 310M model.

Recently, autoregressive (AR) image models have demonstrated remarkable generative capabilities, positioning themselves as a compelling alternative to diffusion models. However, their sequential nature leads to long inference times, limiting their practical scalability. In this work, we introduce Grouped Speculative Decoding (GSD), a novel, training-free acceleration method for AR image models. While recent studies have explored Speculative Decoding (SD) as a means to speed up AR image generation, existing approaches either provide only modest acceleration or require additional training. Our in-depth analysis reveals a fundamental difference between language and image tokens: image tokens exhibit inherent redundancy and diversity, meaning multiple tokens can convey valid semantics. However, traditional SD methods are designed to accept only a single most-likely token, which fails to leverage this difference, leading to excessive false-negative rejections. To address this, we propose a new SD strategy that evaluates clusters of visually valid tokens rather than relying on a single target token. Additionally, we observe that static clustering based on embedding distance is ineffective, which motivates our dynamic GSD approach. Extensive experiments show that GSD accelerates AR image models by an average of 3.7x while preserving image quality-all without requiring any additional training. The source code is available at https://github.com/junhyukso/GSD

Masked diffusion language models (MDLMs) offer the potential for parallel token generation, but most open-source MDLMs decode fewer than 5 tokens per model forward pass even with sophisticated sampling strategies. As a result, their sampling speeds are often comparable to AR + speculative decoding schemes, limiting their advantage over mainstream autoregressive approaches. Existing distillation-based accelerators (dParallel, d3LLM) finetune MDLMs on trajectories generated by a base model, which can become off-policy during finetuning and restrict performance to the quality of the base model's samples. We propose dUltra, an on-policy reinforcement learning framework based on Group Relative Policy Optimization (GRPO) that learns unmasking strategies for efficient parallel decoding. dUltra introduces an unmasking planner head that predicts per-token unmasking likelihoods under independent Bernoulli distributions. We jointly optimize the base diffusion LLM and the unmasking order planner using reward signals combining verifiable reward, distillation reward, and the number of unmasking steps. Across mathematical reasoning and code generation tasks, dUltra improves the accuracy--efficiency trade-off over state-of-the-art heuristic and distillation baselines, moving towards achieving ``diffusion supremacy'' over autoregressive models.

Block diffusion language models (BDLMs) combine autoregressive dependencies across blocks with parallel denoising within blocks, but long-context training is constrained by distributed attention communication and activation memory. Conventional context parallelism (CP) shards the combined clean-plus-corrupted sequence by position, communicating shared clean K/V together with block-specific corrupted K/V and their gradients. We observe that the BDLM objective separates over target blocks. We introduce block parallelism (BP), a new distributed parallelism dimension that assigns each corrupted-block computation to one rank. To scale BP to long contexts, we introduce context-sharded block parallelism (CSBP), which also shards the shared clean sequence across those ranks. CSBP keeps corrupted K/V and gradients local, avoids replicated clean prefixes, and preserves BDLM training semantics. On 16 H200 GPUs at 256K context, CSBP improves throughput over the best baseline by 1.18-1.45x for supervised fine-tuning and 1.27-1.33x for conversion of autoregressive models to BDLMs, while matching or reducing peak HBM. Full-model speedup reaches 1.61x at 512K. On eight H100 GPUs, CSBP accelerates DFlash2 speculative-decoder training by 2.48x at 512K and 7.59x at 1M. In matched 12-hour DiffusionGemma 26B-A4B SFT runs, CSBP achieves higher pass rates at every trained checkpoint on SWE-bench Verified and Terminal-Bench Lite. Code: https://github.com/ScalingIntelligence/Turbo-dLLM

We introduce DiffusionGemma, an experimental open-weight language model that uses discrete diffusion to generate text at exceptionally high speed. Rather than decoding one token at a time, DiffusionGemma iteratively refines blocks of 256 tokens in parallel, avoiding the sequential decoding bottleneck of conventional autoregressive (AR) large language models. Instead of training from scratch, we obtain DiffusionGemma by fine-tuning the mixture-of-experts Gemma 4 model with 3.8B activated and 25.2B total parameters. Our compute-efficient two-stage training pipeline uses fewer than 10% of the starting AR model's total training token budget. The first stage uses supervised fine-tuning to teach bidirectional denoising, while the second stage combines reinforcement learning with sampler distillation to jointly improve generation quality and inference efficiency. DiffusionGemma establishes a new Pareto frontier for the trade-off between generation speed and model capability. Averaged across our full evaluation suite, it generates around 20 tokens per forward pass and achieves roughly 1,500 output tokens per second on a single NVIDIA H100 GPU, which is substantially faster than AR models even with state-of-the-art speculative decoding. DiffusionGemma also retains the starting model's support for thinking mode, multimodal inputs, and long contexts. Despite diffusion fine-tuning, it remains capable of AR generation with only minor performance degradation, suggesting a path toward hybrid diffusion-AR decoding.

Vision-language models (VLMs) predominantly rely on autoregressive decoding, which generates tokens one at a time and fundamentally limits inference throughput. This limitation is especially acute in physical AI scenarios such as robotics and autonomous driving, where VLMs are deployed on edge devices at batch size one, making AR decoding memory-bandwidth-bound and leaving hardware parallelism underutilized. While block-wise discrete diffusion has shown promise for parallel text generation, extending it to VLMs remains challenging due to the need to jointly handle continuous visual representations and discrete text tokens while preserving pretrained multimodal capabilities. We present Fast-dVLM, a block-diffusion-based VLM that enables KV-cache-compatible parallel decoding and speculative block decoding for inference acceleration. We systematically compare two AR-to-diffusion conversion strategies: a two-stage approach that first adapts the LLM backbone with text-only diffusion fine-tuning before multimodal training, and a direct approach that converts the full AR VLM in one stage. Under comparable training budgets, direct conversion proves substantially more efficient by leveraging the already multimodally aligned VLM; we therefore adopt it as our recommended recipe. We introduce a suite of multimodal diffusion adaptations, block size annealing, causal context attention, auto-truncation masking, and vision efficient concatenation, that collectively enable effective block diffusion in the VLM setting. Extensive experiments across 11 multimodal benchmarks show Fast-dVLM matches its autoregressive counterpart in generation quality. With SGLang integration and FP8 quantization, Fast-dVLM achieves over 6x end-to-end inference speedup over the AR baseline.

Autoregressive language models (ARMs) are constrained by sequential, left-to-right generation, while masked diffusion models (MDMs) enable parallel decoding but suffer from high computational overhead due to the inability to reuse Key-Value (KV) cache and from incoherent generation arising from learning dependencies over an intractable space of token combinations. We introduce Zarya, a family of hybrid language models that jointly optimizes an autoregressive (AR) objective and a masked-diffusion objective within a single architecture. Zarya structures training data into variable-size slots and employs a curriculum that gradually increases slot granularity, enabling a smooth transition from fine-grained AR learning to coarse-grained diffusion learning. At inference, Zarya provides two distinct decoding paradigms through a unified interface: (i) MDM sampling with first-hitting denoising, and (ii) slotted speculative decoding that interleaves inter-slot diffusion-based selection with intra-slot autoregressive infilling, achieving full KV cache reuse. The training and inference regimes are fully decoupled, allowing a model trained with any configuration to be deployed in either mode. Extensive configurability --- including grouped noise patterns (Prefix Completion, Fill-In-the-Prefix, Fill-In-the-Middle), ordered sampling schedules, and noise-level permutation strategies --- enables flexible research exploration. We release Zarya models publicly in sizes 0.6B, 1.7B, and 4B, demonstrating performance on standard benchmarks while offering a principled integration of autoregressive and diffusion paradigms.

Residual context is key to unlocking the speed-quality Pareto frontier of diffusion language models (DLMs) by carrying forward predictive distributions across denoising steps. Yet turning this seemingly simple mechanism into an effective learning paradigm is far from simple: there is no clear recipe for how residual context should be learned. We introduce ORL, a framework for on-policy residual learning in DLMs. Algorithmically, we identify that residual learning is inherently on-policy. ORL learns from model-induced residual trajectories on the fly and introduces an entropy-contraction objective that sharpens predictions as the model revisits its own predictions. System-wise, exact residual supervision requires capturing, retaining, and reprocessing many trajectory-dependent states. ORL co-designs the algorithm with asynchronous residual capture and transport, specialized block-diffusion attention, and packed compute-balanced training, making it practical at scale. On a 4B DLM converted from Qwen3-4B, ORL improves tokens per forward (TPF) by up to 6.2x and, with our dlmrt engine, end-to-end throughput by approximately 6.9x at comparable or better quality. In single-request serving on one H100, this mode achieves a stronger speed-quality Pareto frontier than autoregressive models with EAGLE3 and DFlash speculative decoding under both strict and relaxed verification, running 1.74x faster than DFlash at matched accuracy. ORL also transfers to existing DLMs: on LLaDA-2.1-mini, 36 H100-hours and 4.2M self-generated tokens, about 10x less data than prior LLaDA recipes, yield up to 1.5x higher TPF and up to 3x higher throughput at comparable quality, and on DiffusionGemma, ORL raises TPF by 1.1-1.2x. With dlmrt and NVFP4 quantization, ORL models decode a single request at up to 5,046 tokens/s on one B200, 7,708 on eight B200s, and 2,788 on a consumer RTX 5090, with comparable quality.

Auto-Regressive (AR) models have recently gained prominence in image generation, often matching or even surpassing the performance of diffusion models. However, one major limitation of AR models is their sequential nature, which processes tokens one at a time, slowing down generation compared to models like GANs or diffusion-based methods that operate more efficiently. While speculative decoding has proven effective for accelerating LLMs by generating multiple tokens in a single forward, its application in visual AR models remains largely unexplored. In this work, we identify a challenge in this setting, which we term token selection ambiguity, wherein visual AR models frequently assign uniformly low probabilities to tokens, hampering the performance of speculative decoding. To overcome this challenge, we propose a relaxed acceptance condition referred to as LANTERN that leverages the interchangeability of tokens in latent space. This relaxation restores the effectiveness of speculative decoding in visual AR models by enabling more flexible use of candidate tokens that would otherwise be prematurely rejected. Furthermore, by incorporating a total variation distance bound, we ensure that these speed gains are achieved without significantly compromising image quality or semantic coherence. Experimental results demonstrate the efficacy of our method in providing a substantial speed-up over speculative decoding. In specific, compared to a na\"ive application of the state-of-the-art speculative decoding, LANTERN increases speed-ups by 1.75times and 1.76times, as compared to greedy decoding and random sampling, respectively, when applied to LlamaGen, a contemporary visual AR model.

Speculative decoding accelerates large language model inference without changing the target distribution, but no single drafting structure performs best across real-world workloads. Autoregressive multi-token prediction (MTP) is a lightweight, stable proposal mechanism, whereas block-parallel diffusion amortizes drafting latency over much longer candidate sequences; the better choice depends strongly on the output distribution. We present AngelSpec, a unified training framework for MTP and block-parallel speculative decoding that addresses this heterogeneity at three levels. At the training level, rather than fitting one universal drafter to a uniform data mixture, we co-specialize structure and data: the MTP drafter is trained on diverse conversational data for high-entropy open-ended chat, and the block-diffusion drafter on code and mathematics data for longer predictable continuations. At the architecture level, we propose DFly, a block-diffusion framework combining a hybrid target-conditioning backbone with a predecessor-conditioned autoregressive head, improving target-feature utilization and intra-block dependency modeling while keeping generation parallel. At the inference level, both acceptance length and verification cost vary with domain, request, online load, and hardware, so DFly treats verification as a shared batch-level resource: it reallocates compute toward high-confidence prefixes across requests and combines expected utility with a profiled cost model to adapt verification depth online. Across the Hy3 series, DFly raises the average accepted length on Hy3-A21B by roughly 30% and attains the highest average throughput at every tested concurrency from 4 to 64, a 1.98-2.40x speedup over autoregressive decoding and 10.5-11.8% higher throughput than DFlash. We release AngelSpec to support training and extending these methods.

Text-to-image (T2I) diffusion models offer powerful visual generation, but their controllability creates a critical safety challenge: adversarial prompts can steer the denoising trajectory toward policy-violating content such as explicit nudity or graphic violence. Existing safeguards mostly act before generation through prompt filtering or after generation through image classification, leaving the diffusion process itself unguarded and often yielding only refusal rather than safe visual repair. We introduce GuardPaint, a speculative decoding framework for safe T2I generation that intervenes inside the diffusion trajectory without modifying the base model. A lightweight auditor monitors intermediate images, localizes unsafe regions, and triggers surgical inpainting repair only where needed. Candidate repairs are generated by a policy-aligned inpainter and selected through a guarded tournament that accepts edits only when they improve policy compliance while preserving prompt fidelity and perceptual quality. Across five jailbreak families SneakPrompt, MMA, PGJ, DACA, and RABell and UNet/flow-matching models including SD~1.5, SDXL, SD~3.5, and FLUX.1-dev. GuardPaint reduces attack success and harmful generations with minimal degradation to image quality, prompt fidelity, and benign behavior. Content warning: This paper contains examples involving nudity and violence that some readers may find disturbing, distressing, or offensive.

Recent byte-level language models (LMs) match the performance of token-level models without relying on subword vocabularies, yet their utility is limited by slow, byte-by-byte autoregressive generation. We address this bottleneck in the Byte Latent Transformer (BLT) through new training and generation techniques. First, we introduce BLT Diffusion (BLT-D), a new model and our fastest BLT variant, trained with an auxiliary block-wise diffusion objective alongside the standard next-byte prediction loss. This enables an inference procedure that generates multiple bytes in parallel per decoding step, substantially reducing the number of forward passes required to generate a sequence. Second, we propose two extensions inspired by speculative decoding that trade some of this speed for higher generation quality: BLT Self-speculation (BLT-S), in which BLT's local decoder continues generating past its normal patch boundaries to draft bytes, which are then verified with a single full-model forward pass; and BLT Diffusion+Verification (BLT-DV), which augments BLT-D with an autoregressive verification step after diffusion-based generation. All methods may achieve an estimated memory-bandwidth cost over 50% lower than BLT on generation tasks. Each approach offers its own unique advantages, together removing key barriers to the practical use of byte-level LMs.

Unified multimodal models have recently attracted considerable attention for their remarkable abilities in jointly understanding and generating diverse content. However, as contexts integrate increasingly numerous interleaved multimodal tokens, the iterative processes of diffusion denoising and autoregressive decoding impose significant computational overhead. To address this, we propose Hyper-Bagel, a unified acceleration framework designed to simultaneously speed up both multimodal understanding and generation tasks. Our approach uses a divide-and-conquer strategy, employing speculative decoding for next-token prediction and a multi-stage distillation process for diffusion denoising. The framework delivers substantial performance gains, achieving over a 2x speedup in multimodal understanding. For generative tasks, our resulting lossless 6-NFE model yields a 16.67x speedup in text-to-image generation and a 22x speedup in image editing, all while preserving the high-quality output of the original model. We further develop a highly efficient 1-NFE model that enables near real-time interactive editing and generation. By combining advanced adversarial distillation with human feedback learning, this model achieves ultimate cost-effectiveness and responsiveness, making complex multimodal interactions seamless and instantaneous.

Speculative decoding is an effective method for accelerating inference of large language models (LLMs) by employing a small draft model to predict the output of a target model. However, when adapting speculative decoding to domain-specific target models, the acceptance rate of the generic draft model drops significantly due to domain shift. In this work, we systematically investigate knowledge distillation techniques for training domain draft models to improve their speculation accuracy. We compare white-box and black-box distillation approaches and explore their effectiveness in various data accessibility scenarios, including historical user queries, curated domain data, and synthetically generated alignment data. Our experiments across Function Calling, Biology, and Chinese domains show that offline distillation consistently outperforms online distillation by 11% to 25%, white-box distillation surpasses black-box distillation by 2% to 10%, and data scaling trends hold across domains. Additionally, we find that synthetic data can effectively align draft models and achieve 80% to 93% of the performance of training on historical user queries. These findings provide practical guidelines for training domain-specific draft models to improve speculative decoding efficiency.

Diffusion models, initially developed for image synthesis, demonstrate remarkable generative capabilities. Recently, their application has expanded to time series forecasting (TSF), yielding promising results. Existing surveys on time series primarily focus on the application of diffusion models to time series tasks or merely provide model-by-model introductions of diffusion-based TSF models, without establishing a systematic taxonomy for existing diffusion-based TSF models. In this survey, we firstly introduce several standard diffusion models and their prevalent variants, explaining their adaptation to TSF tasks. Then, we provide a comprehensive review of diffusion models for TSF, paying special attention to the sources of conditional information and the mechanisms for integrating this conditioning within the models. In analyzing existing approaches using diffusion models for TSF, we provide a systematic categorization and a comprehensive summary of them in this survey. Furthermore, we examine several foundational diffusion models applied to TSF, alongside commonly used datasets and evaluation metrics. Finally, we discuss the progress and limitations of these approaches, as well as potential future research directions for diffusion-based TSF. Overall, this survey offers a comprehensive overview of recent progress and future prospects for diffusion models in TSF, serving as a valuable reference for researchers in the field.

Speculative decoding is a prominent technique to speed up the inference of a large target language model based on predictions of an auxiliary draft model. While effective, in application-specific settings, it often involves fine-tuning both draft and target models to achieve high acceptance rates. As the number of downstream tasks grows, these draft models add significant complexity to inference systems. We propose Speculative Streaming, a single-model speculative decoding method that fuses drafting into the target model by changing the fine-tuning objective from next token prediction to future n-gram prediction. Speculative Streaming speeds up decoding by 1.8 - 3.1X in a diverse set of tasks, such as Summarization, Structured Queries, and Meaning Representation, without sacrificing generation quality. Additionally, Speculative Streaming is parameter-efficient. It achieves on-par/higher speed-ups than Medusa-style architectures while using ~10000X fewer extra parameters, making it well-suited for resource-constrained devices.

We introduce Nemotron-Labs-Diffusion, a tri-mode language model (LM) that unifies AR, diffusion, and self-speculation decoding within a single architecture. Trained with a joint AR-diffusion objective, Nemotron-Labs-Diffusion can switch modes to sustain high throughput across deployment settings and concurrency levels. Our study shows that (1) AR and diffusion objectives are complementary: diffusion improves lookahead planning, while AR provides left-to-right linguistic priors. (2) In self-speculation mode, diffusion drafts while AR verifies, outperforming multi-token prediction (MTP) methods in both acceptance rate and real-device efficiency. (3) A speed-of-light analysis further demonstrates diffusion's long-term potential, with up to 76.5% more tokens per forward pass than self-speculation under an optimal sampler. Scaling to 3B, 8B, and 14B parameters, our Nemotron-Labs-Diffusion family, including base, instruct, and vision-language models, consistently outperforms state-of-the-art open-source AR and diffusion LMs in both accuracy and speed. For example, Nemotron-Labs-Diffusion-8B decodes 6x more tokens per forward than Qwen3-8B with comparable accuracy, translating to 4x higher throughput on SPEED-Bench with SGLang on a GB200 GPU.

Large Language Models (LLMs) have become more prevalent in long-context applications such as interactive chatbots, document analysis, and agent workflows, but it is challenging to serve long-context requests with low latency and high throughput. Speculative decoding (SD) is a widely used technique to reduce latency without sacrificing performance but the conventional wisdom suggests that its efficacy is limited to small batch sizes. In MagicDec, we show that surprisingly SD can achieve speedup even for a high throughput inference regime for moderate to long sequences. More interestingly, an intelligent drafting strategy can achieve better speedup with increasing batch size based on our rigorous analysis. MagicDec first identifies the bottleneck shifts with increasing batch size and sequence length, and uses these insights to deploy speculative decoding more effectively for high throughput inference. Then, it leverages draft models with sparse KV cache to address the KV bottleneck that scales with both sequence length and batch size.

Speculative decoding is a pivotal technique to accelerate the inference of large language models (LLMs) by employing a smaller draft model to predict the target model's outputs. However, its efficacy can be limited due to the low predictive accuracy of the draft model, particularly when faced with diverse text inputs and a significant capability gap between the draft and target models. We introduce online speculative decoding (OSD) to address this challenge. The main idea is to continually update (multiple) draft model(s) on observed user query data using the abundant excess computational power in an LLM serving cluster. Given that LLM inference is memory-bounded, the surplus computational power in a typical LLM serving cluster can be repurposed for online retraining of draft models, thereby making the training cost-neutral. Since the query distribution of an LLM service is relatively simple, retraining on query distribution enables the draft model to more accurately predict the target model's outputs, particularly on data originating from query distributions. As the draft model evolves online, it aligns with the query distribution in real time, mitigating distribution shifts. We develop a prototype of online speculative decoding based on online knowledge distillation and evaluate it using both synthetic and real query data on several popular LLMs. The results show a substantial increase in the token acceptance rate by 0.1 to 0.65, which translates into 1.22x to 3.06x latency reduction.

Speculative decoding (SD) is a widely adopted approach for accelerating inference in large language models (LLMs), particularly when the draft and target models are well aligned. However, state-of-the-art SD methods typically rely on tightly coupled, self-attention-based Transformer decoders, often augmented with auxiliary pooling or fusion layers. This coupling makes them increasingly complex and harder to generalize across different models. We present Budget EAGLE (Beagle), the first, to our knowledge, cross-attention-based Transformer decoder SD model that achieves performance on par with leading self-attention SD models (EAGLE-v2) while eliminating the need for pooling or auxiliary components, simplifying the architecture, improving training efficiency, and maintaining stable memory usage during training-time simulation. To enable effective training of this novel architecture, we propose Two-Stage Block-Attention Training, a new method that achieves training stability and convergence efficiency in block-level attention scenarios. Extensive experiments across multiple LLMs and datasets show that Beagle achieves competitive inference speedups and higher training efficiency than EAGLE-v2, offering a strong alternative for architectures in speculative decoding.

Speculative decoding is a promising method for reducing the inference latency of large language models. The effectiveness of the method depends on the speculation length (SL) - the number of tokens generated by the draft model at each iteration. The vast majority of speculative decoding approaches use the same SL for all iterations. In this work, we show that this practice is suboptimal. We introduce DISCO, a DynamIc SpeCulation length Optimization method that uses a classifier to dynamically adjust the SL at each iteration, while provably preserving the decoding quality. Experiments with four benchmarks demonstrate average speedup gains of 10.3% relative to our best baselines.

World models can enable Model Predictive Control (MPC), but this requires dynamics prediction that is both fast enough for online use and expressive enough to represent uncertain futures. Diffusion models offer a natural mechanism for modeling uncertain dynamics, yet their iterative inference procedure makes them difficult to use for low-latency latent planning. We bridge this gap with Value Diffusion World Models (Valdi), combining end-to-end online training for MPC with a latent diffusion dynamics model. In preliminary experiments on the CarRacing environment, we show that Valdi, using a single diffusion step at both training and inference, matches a deterministic MLP baseline. Our experiments expose a trade-off between predictive multimodality and control performance in this setup. Code is available at https://github.com/Kit115/ValueDiffusionWorldModels.

Creative image generation has emerged as a compelling area of research, driven by the need to produce novel and high-quality images that expand the boundaries of imagination. In this work, we propose a novel framework for creative generation using diffusion models, where creativity is associated with the inverse probability of an image's existence in the CLIP embedding space. Unlike prior approaches that rely on a manual blending of concepts or exclusion of subcategories, our method calculates the probability distribution of generated images and drives it towards low-probability regions to produce rare, imaginative, and visually captivating outputs. We also introduce pullback mechanisms, achieving high creativity without sacrificing visual fidelity. Extensive experiments on text-to-image diffusion models demonstrate the effectiveness and efficiency of our creative generation framework, showcasing its ability to produce unique, novel, and thought-provoking images. This work provides a new perspective on creativity in generative models, offering a principled method to foster innovation in visual content synthesis.

Autoregressive decoding is bottlenecked by its sequential nature. Speculative decoding has become a standard way to accelerate inference by using a fast draft model to predict upcoming tokens from a slower target model, and then verifying them in parallel with a single target model forward pass. However, speculative decoding itself relies on a sequential dependence between speculation and verification. We introduce speculative speculative decoding (SSD) to parallelize these operations. While a verification is ongoing, the draft model predicts likely verification outcomes and prepares speculations pre-emptively for them. If the actual verification outcome is then in the predicted set, a speculation can be returned immediately, eliminating drafting overhead entirely. We identify three key challenges presented by speculative speculative decoding, and suggest principled methods to solve each. The result is Saguaro, an optimized SSD algorithm. Our implementation is up to 2x faster than optimized speculative decoding baselines and up to 5x faster than autoregressive decoding with open source inference engines.

Accelerating the inference of large language models (LLMs) is a critical challenge in generative AI. Speculative decoding (SD) methods offer substantial efficiency gains by generating multiple tokens using a single target forward pass. However, existing SD approaches require the drafter and target models to share the same vocabulary, thus limiting the pool of possible drafters, often necessitating the training of a drafter from scratch. We present three new SD methods that remove this shared-vocabulary constraint. All three methods preserve the target distribution (i.e., they are lossless) and work with off-the-shelf models without requiring additional training or modifications. Empirically, on summarization, programming, and long-context tasks, our algorithms achieve significant speedups over standard autoregressive decoding. By enabling any off-the-shelf model to serve as drafter and requiring no retraining, this work substantially broadens the applicability of the SD framework in practice.

We introduce Diffusion World Model (DWM), a conditional diffusion model capable of predicting multistep future states and rewards concurrently. As opposed to traditional one-step dynamics models, DWM offers long-horizon predictions in a single forward pass, eliminating the need for recursive quires. We integrate DWM into model-based value estimation, where the short-term return is simulated by future trajectories sampled from DWM. In the context of offline reinforcement learning, DWM can be viewed as a conservative value regularization through generative modeling. Alternatively, it can be seen as a data source that enables offline Q-learning with synthetic data. Our experiments on the D4RL dataset confirm the robustness of DWM to long-horizon simulation. In terms of absolute performance, DWM significantly surpasses one-step dynamics models with a 44% performance gain, and achieves state-of-the-art performance.

Accurately anticipating how complex, diverse scenes will evolve requires models that represent uncertainty, simulate along extended interaction chains, and efficiently explore many plausible futures. Yet most existing approaches rely on dense video or latent-space prediction, expending substantial capacity on dense appearance rather than on the underlying sparse trajectories of points in the scene. This makes large-scale exploration of future hypotheses costly and limits performance when long-horizon, multi-modal motion is essential. We address this by formulating the prediction of open-set future scene dynamics as step-wise inference over sparse point trajectories. Our autoregressive diffusion model advances these trajectories through short, locally predictable transitions, explicitly modeling the growth of uncertainty over time. This dynamics-centric representation enables fast rollout of thousands of diverse futures from a single image, optionally guided by initial constraints on motion, while maintaining physical plausibility and long-range coherence. We further introduce OWM, a benchmark for open-set motion prediction based on diverse in-the-wild videos, to evaluate accuracy and variability of predicted trajectory distributions under real-world uncertainty. Our method matches or surpasses dense simulators in predictive accuracy while achieving orders-of-magnitude higher sampling speed, making open-set future prediction both scalable and practical. Project page: http://compvis.github.io/myriad.

Diffusion and flow-based models have enabled significant progress in generation tasks across various modalities and have recently found applications in world modeling. However, unlike typical generation tasks that encourage sample diversity, world models entail different sources of uncertainty and require consistent samples aligned with the ground-truth trajectory, which is a limitation we empirically observe in diffusion models. We argue that a key bottleneck in learning consistent diffusion-based world models lies in the suboptimal predictive ability, which we attribute to the entanglement of condition understanding and target denoising within shared architectures and co-training schemes. To address this, we propose Foresight Diffusion (ForeDiff), a diffusion-based world modeling framework that enhances consistency by decoupling condition understanding from target denoising. ForeDiff incorporates a separate deterministic predictive stream to process conditioning inputs independently of the denoising stream, and further leverages a pretrained predictor to extract informative representations that guide generation. Extensive experiments on robot video prediction and scientific spatiotemporal forecasting show that ForeDiff improves both predictive accuracy and sample consistency over strong baselines, offering a promising direction for diffusion-based world models.

Generative Recommendation (GR), powered by Large Language Models (LLMs), represents a promising new paradigm for industrial recommender systems. However, their practical application is severely hindered by high inference latency, which makes them infeasible for high-throughput, real-time services and limits their overall business impact. While Speculative Decoding (SD) has been proposed to accelerate the autoregressive generation process, existing implementations introduce new bottlenecks: they typically require separate draft models and model-based verifiers, requiring additional training and increasing the latency overhead. In this paper, we address these challenges with NEZHA, a novel architecture that achieves hyperspeed decoding for GR systems without sacrificing recommendation quality. Specifically, NEZHA integrates a nimble autoregressive draft head directly into the primary model, enabling efficient self-drafting. This design, combined with a specialized input prompt structure, preserves the integrity of sequence-to-sequence generation. Furthermore, to tackle the critical problem of hallucination, a major source of performance degradation, we introduce an efficient, model-free verifier based on a hash set. We demonstrate the effectiveness of NEZHA through extensive experiments on public datasets and have successfully deployed the system on Taobao since October 2025, driving the billion-level advertising revenue and serving hundreds of millions of daily active users.

Sparse Mixture-of-Experts (MoE) models have become an important approach for scaling Large Language Models (LLMs), but their inference efficiency depends strongly on expert activation patterns. Speculative decoding (SD) accelerates autoregressive generation by verifying multiple draft tokens in parallel, yet existing draft selection strategies primarily optimize acceptance likelihood. In large-scale MoE models, however, selecting draft tokens also determines the union of experts activated during verification. We observe that confidence-driven SD can introduce expert scattering: high-probability draft tokens may route to disjoint experts, increasing expert-weight memory traffic and reducing the speedup from speculation. Motivated by this observation, we revisit draft-tree selection under the non-uniform memory-cost structure of MoE inference. We propose EcoSpec, a cost-aware speculative decoding framework that incorporates predicted marginal expert activation cost into draft selection. With a lightweight expert predictor and a dynamic expert buffer, EcoSpec favors draft paths that preserve high acceptance likelihood while reusing experts already covered by the current verification set, without modifying the target-model verification rule. We evaluate EcoSpec on three large-scale MoE models, including DeepSeek-V3.1 (671B), Qwen3-235B-A22B, and GPT-OSS-120B, across reasoning, coding, question-answering, and dialogue benchmarks. EcoSpec consistently reduces active expert footprints and improves end-to-end decoding speed, achieving up to 1.62times speedup. These results show that accounting for expert activation cost is important for efficient speculative decoding in large-scale MoE models.

In spite of recent advancements in text-to-image generation, limitations persist in handling complex and imaginative prompts due to the restricted diversity and complexity of training data. This work explores how diffusion models can generate images from prompts requiring artistic creativity or specialized knowledge. We introduce the Realistic-Fantasy Benchmark (RFBench), a novel evaluation framework blending realistic and fantastical scenarios. To address these challenges, we propose the Realistic-Fantasy Network (RFNet), a training-free approach integrating diffusion models with LLMs. Extensive human evaluations and GPT-based compositional assessments demonstrate our approach's superiority over state-of-the-art methods. Our code and dataset is available at https://leo81005.github.io/Reality-and-Fantasy/.

Speculative Decoding (SD) is a technique to accelerate the inference of Large Language Models (LLMs) by using a lower complexity draft model to propose candidate tokens verified by a larger target model. To further improve efficiency, Multi-Candidate Speculative Decoding (MCSD) improves upon this by sampling multiple candidate tokens from the draft model at each step and verifying them in parallel, thus increasing the chances of accepting a token and reducing generation time. Existing MCSD methods rely on the draft model to initialize the multi-candidate sequences and use static length and tree attention structure for draft generation. However, such an approach suffers from the draft and target model's output distribution differences, especially in dynamic generation context. In this work, we introduce an improved version of MCSD that includes a target model initialized multi-candidate process, dynamic sliced topology-aware causal mask for dynamic length adjustment, and decision models to optimize early stopping. Our framework improves the acceptance rate, defined as the ratio of the longest draft sequence length accepted by the target model over the maximum draft sequence length, by a maximum of 164% and gains a maximum of 75% generation speed up over the MCSD baseline. We also conduct an ablation study to evaluate the impact of the decision model.

Speculative decoding is a relatively new decoding framework that leverages small and efficient draft models to reduce the latency of LLMs. In this study, we introduce GliDe and CaPE, two low-hassle modifications to vanilla speculative decoding to further improve the decoding speed of a frozen LLM. Specifically, GliDe is a modified draft model architecture that reuses the cached keys and values from the target LLM, while CaPE is a proposal expansion method that uses the draft model's confidence scores to help select additional candidate tokens for verification. Extensive experiments on different benchmarks demonstrate that our proposed GliDe draft model significantly reduces the expected decoding latency. Additional evaluation using walltime reveals that GliDe can accelerate Vicuna models up to 2.17x and further extend the improvement to 2.61x with CaPE. We will release our code, data, and the trained draft models.

Speculative decoding (SD) is a powerful technique for accelerating the inference process of large language models (LLMs) without sacrificing accuracy. Typically, SD employs a small draft model to generate a fixed number of draft tokens, which are then verified in parallel by the target model. However, our experiments reveal that the optimal draft length varies significantly across different decoding steps. This variation suggests that using a fixed draft length limits the potential for further improvements in decoding speed. To address this challenge, we propose Pacer, a novel approach that dynamically controls draft length using a lightweight, trainable pre-verification layer. This layer pre-verifies draft tokens blockwise before they are sent to the target model, allowing the draft model to stop token generation if the blockwise pre-verification fails. We implement Pacer on multiple SD model pairs and evaluate its performance across various benchmarks. Our results demonstrate that Pacer achieves up to 2.66x Speedup over autoregressive decoding and consistently outperforms standard speculative decoding. Furthermore, when integrated with Ouroboros, Pacer attains up to 3.09x Speedup.

Speculative Decoding (SD) is a widely used approach to accelerate the inference of large language models (LLMs) without reducing generation quality. It operates by first using a compact model to draft multiple tokens efficiently, followed by parallel verification using the target LLM. This approach leads to faster inference compared to auto-regressive decoding. While there are multiple approaches to create a draft model, one promising approach is to use early-exit methods. These methods draft candidate tokens by using a subset of layers of the primary model and applying the remaining layers for verification, allowing a single model to handle both drafting and verification. While this technique reduces memory usage and computational cost, its performance relies on the choice of the exit layer for drafting and the number of tokens drafted (speculation length) in each SD round. Prior works use hyperparameter exploration to statically select these values. However, our evaluations show that these hyperparameter values are task-specific, and even within a task they are dependent on the current sequence context. We introduce DEL, a plug-and-play method that adaptively selects the exit layer and speculation length during inference. DEL dynamically tracks the token acceptance rate if the tokens are drafted at each layer of an LLM and uses that knowledge to heuristically select the optimal exit layer and speculation length. Our experiments across a broad range of models and downstream tasks show that DEL achieves overall speedups of 2.16timessim2.50times over vanilla auto-regressive decoding and improves upon the state-of-the-art SD methods by up to 0.27times.

Speculative decoding is a technique that uses multiple language models to accelerate infer- ence. Previous works have used an experi- mental approach to optimize the throughput of the inference pipeline, which involves LLM training and can be costly. This study of spec- ulative decoding proposes a theory that ana- lytically connects the key hyperparameters of pre-trained LLMs to the throughput efficiency of a downstream SD-based inference system. The theory allows the prediction of throughput- optimal hyperparameters for the components of an inference system before their pre-training.

Diffusion models have achieved state-of-the-art performance in generative modeling tasks across various domains. Prior works on time series diffusion models have primarily focused on developing conditional models tailored to specific forecasting or imputation tasks. In this work, we explore the potential of task-agnostic, unconditional diffusion models for several time series applications. We propose TSDiff, an unconditionally trained diffusion model for time series. Our proposed self-guidance mechanism enables conditioning TSDiff for downstream tasks during inference, without requiring auxiliary networks or altering the training procedure. We demonstrate the effectiveness of our method on three different time series tasks: forecasting, refinement, and synthetic data generation. First, we show that TSDiff is competitive with several task-specific conditional forecasting methods (predict). Second, we leverage the learned implicit probability density of TSDiff to iteratively refine the predictions of base forecasters with reduced computational overhead over reverse diffusion (refine). Notably, the generative performance of the model remains intact -- downstream forecasters trained on synthetic samples from TSDiff outperform forecasters that are trained on samples from other state-of-the-art generative time series models, occasionally even outperforming models trained on real data (synthesize).

Speculative sampling has emerged as an important technique for accelerating the auto-regressive generation process of large language models (LLMs) by utilizing a draft-then-verify mechanism to produce multiple tokens per forward pass. While state-of-the-art speculative sampling methods use only a single layer and a language modeling (LM) head as the draft model to achieve impressive layer compression, their efficiency gains are substantially reduced for large-vocabulary LLMs, such as Llama-3-8B with a vocabulary of 128k tokens. To address this, we present FR-Spec, a frequency-ranked speculative sampling framework that optimizes draft candidate selection through vocabulary space compression. By constraining the draft search to a frequency-prioritized token subset, our method reduces LM Head computation overhead by 75% while ensuring the equivalence of the final output distribution. Experiments across multiple datasets demonstrate an average of 1.12times speedup over the state-of-the-art speculative sampling method EAGLE-2.

Predicting and anticipating future outcomes or reasoning about missing information in a sequence are critical skills for agents to be able to make intelligent decisions. This requires strong, temporally coherent generative capabilities. Diffusion models have shown remarkable success in several generative tasks, but have not been extensively explored in the video domain. We present Random-Mask Video Diffusion (RaMViD), which extends image diffusion models to videos using 3D convolutions, and introduces a new conditioning technique during training. By varying the mask we condition on, the model is able to perform video prediction, infilling, and upsampling. Due to our simple conditioning scheme, we can utilize the same architecture as used for unconditional training, which allows us to train the model in a conditional and unconditional fashion at the same time. We evaluate RaMViD on two benchmark datasets for video prediction, on which we achieve state-of-the-art results, and one for video generation. High-resolution videos are provided at https://sites.google.com/view/video-diffusion-prediction.

Speculative Decoding (SD) has emerged as a widely used paradigm to accelerate the inference of large language models (LLMs) without compromising generation quality. It works by efficiently drafting multiple tokens using a compact model and then verifying them in parallel using the target LLM. Notably, Self-Speculative Decoding proposes skipping certain layers to construct the draft model, which eliminates the need for additional parameters or training. Despite its strengths, we observe in this work that drafting with layer skipping exhibits significant sensitivity to domain shifts, leading to a substantial drop in acceleration performance. To enhance the domain generalizability of this paradigm, we introduce KNN-SSD, an algorithm that leverages K-Nearest Neighbor (KNN) search to match different skipped layers with various domain inputs. We evaluated our algorithm in various models and multiple tasks, observing that its application leads to 1.3x-1.6x speedup in LLM inference.

Predictive Coding (PC) is a theoretical framework in cognitive science suggesting that the human brain processes cognition through spatiotemporal prediction of the visual world. Existing studies have developed spatiotemporal prediction neural networks based on the PC theory, emulating its two core mechanisms: Correcting predictions from residuals and hierarchical learning. However, these models do not show the enhancement of prediction skills on real-world forecasting tasks and ignore the Precision Weighting mechanism of PC theory. The precision weighting mechanism posits that the brain allocates more attention to signals with lower precision, contributing to the cognitive ability of human brains. This work introduces the Cognitive Diffusion Probabilistic Models (CogDPM), which demonstrate the connection between diffusion probabilistic models and PC theory. CogDPM features a precision estimation method based on the hierarchical sampling capabilities of diffusion models and weight the guidance with precision weights estimated by the inherent property of diffusion models. We experimentally show that the precision weights effectively estimate the data predictability. We apply CogDPM to real-world prediction tasks using the United Kindom precipitation and ERA surface wind datasets. Our results demonstrate that CogDPM outperforms both existing domain-specific operational models and general deep prediction models by providing more proficient forecasting.

Speculative decoding is an effective technique for accelerating large language model inference by drafting multiple tokens in parallel. In practice, its speedup is often bottlenecked by a rigid verification step that strictly enforces the accepted token distribution to exactly match the target model. This constraint leads to the rejection of many plausible tokens, lowering the acceptance rate and limiting overall time speedup. To overcome this limitation, we propose Dynamic Verification Relaxed Speculative Decoding (DIVERSED), a relaxed verification framework that improves time efficiency while preserving generation quality. DIVERSED learns an ensemble-based verifier that blends the draft and target model distributions with a task-dependent and context-dependent weight. We provide theoretical justification for our approach and demonstrate empirically that DIVERSED achieves substantially higher inference efficiency compared to standard speculative decoding methods. Code is available at: https://github.com/comeusr/diversed.

Diffusion models, despite their impressive demos, often produce hallucinatory samples with structural inconsistencies that lie outside of the support of the true data distribution. Such hallucinations can be attributed to excessive smoothing between modes of the data distribution. However, semantic interpolations are often desirable and can lead to generation diversity, thus we believe a more nuanced solution is required. In this work, we introduce Dynamic Guidance, which tackles this issue. Dynamic Guidance mitigates hallucinations by selectively sharpening the score function only along the pre-determined directions known to cause artifacts, while preserving valid semantic variations. To our knowledge, this is the first approach that addresses hallucinations at generation time rather than through post-hoc filtering. Dynamic Guidance substantially reduces hallucinations on both controlled and natural image datasets, significantly outperforming baselines.

Interactive video generation commonly relies on small bidirectional chunks to reduce response latency. Yet our preliminary experiments show that larger chunks improve video quality and better utilize GPU parallelism, allowing more latents to be sampled with only a modest increase in sampling time. Motivated by these observations, we propose Speculative Sampling, a strategy that combines the modeling power of large bidirectional windows with the low-latency interaction of small ones. It expands the modeling window by appending noise latents as padding and caches the resulting predictions for reuse when the condition remains unchanged. Predictions are delivered incrementally, while the uncommitted future remains replaceable. Our latency analysis shows that this removes the waiting-time lower bound imposed by chunk boundaries, shifting the optimization focus from reducing chunk size to accelerating per-chunk sampling. Bidirectional window size thus becomes a decision variable for jointly optimizing visual quality and sampling time, rather than a necessary constraint on low-latency interaction. This opens a path to serving large bidirectional models in interactive streaming systems without complex streaming post-training.

Speculative decoding reduces the inference latency of a target large language model via utilizing a smaller and faster draft model. Its performance depends on a hyperparameter K -- the candidate length, i.e., the number of candidate tokens for the target model to verify in each round. However, previous methods often use simple heuristics to choose K, which may result in sub-optimal performance. We study the choice of the candidate length K and formulate it as a Markov Decision Process. We theoretically show that the optimal policy of this Markov decision process takes the form of a threshold policy, i.e., the current speculation should stop and be verified when the probability of getting a rejection exceeds a threshold value. Motivated by this theory, we propose SpecDec++, an enhanced version of speculative decoding that adaptively determines the candidate length on the fly. We augment the draft model with a trained acceptance prediction head to predict the conditional acceptance probability of the candidate tokens. SpecDec++ will stop the current speculation when the predicted probability that at least one token gets rejected exceeds a threshold. We implement SpecDec++ and apply it to the llama-2-chat 7B & 70B model pair. Our adaptive method achieves a 2.04x speedup on the Alpaca dataset (an additional 7.2% improvement over the baseline speculative decoding). On the GSM8K and HumanEval datasets, our method achieves a 2.26x speedup (9.4% improvement) and 2.23x speedup (11.1% improvement), respectively.

Speculative Decoding (SD) enforces strict distributional equivalence to the target model when accepting candidate tokens. While it maintains the target model's generation quality, this strict equivalence limits the speedup achievable by SD and prevents users from trading deviations from the target distribution in exchange for further inference speed gains. To address these limitations, we introduce Fuzzy Speculative Decoding (FSD) - a decoding algorithm that generalizes SD by accepting candidate tokens based on the divergences between the target and draft model distributions. By allowing for controlled divergence from the target model, FSD enables users to flexibly trade generation quality for inference speed. Across several benchmarks, our method is able to achieve significant runtime improvements of over 5 tokens per second faster than SD at only an approximate 2% absolute reduction in benchmark accuracy. In many cases, FSD is even able to match SD benchmark accuracy at over 2 tokens per second faster, demonstrating that distributional equivalence is not necessary to maintain target model performance. Furthermore, FSD can be seamlessly integrated into existing SD extensions; we demonstrate this by applying FSD to EAGLE-2, greatly enhancing this existing extension's efficiency while allowing it to leverage FSD's tunable quality-speed trade-off.

Speculative decoding (SD) is a widely used approach for accelerating decode-heavy LLM inference workloads. While online inference workloads are highly dynamic, existing SD systems are rigid and take a coarse-grained approach to SD management. They typically set the speculative token length for an entire batch and serialize the execution of the draft and verification phases. Consequently, these systems fall short at adapting to volatile online inference traffic. Under low load, they exhibit prolonged latency because the draft phase blocks the verification phase for the entire batch, leaving GPU computing resources underutilized. Conversely, under high load, they waste computation on rejected tokens during the verification phase, overloading GPU resources. We introduce FASER, a novel system that features fine-grained SD phase management. First, FASER minimizes computational waste by dynamically adjusting the speculative length for each request within a continuous batch and by performing early pruning of rejected tokens inside the verification phase. Second, FASER breaks the verification phase into frontiers, or chunks, to overlap them with the draft phase. This overlap is achieved via fine-grained spatial multiplexing with minimal resource interference. Our FASER prototype in vLLM improves throughput by up to 53% and reduces latency by up to 1.92times compared to state-of-the-art systems.

Adapting large language models (LLMs) via reinforcement learning (RL) is often bottlenecked by the generation stage, which can consume over 75\% of the training time. Speculative decoding (SD) accelerates autoregressive generation in serving systems, but its behavior under RL training remains largely unexplored. We identify three critical gaps that hinder the naive integration of SD into RL systems: diminishing speedups at large batch sizes, drafter staleness under continual actor updates, and drafter-induced policy degradation. To address these gaps, we present ReSpec, a system that adapts SD to RL through three complementary mechanisms: dynamically tuning SD configurations, evolving the drafter via knowledge distillation, and weighting updates by rollout rewards. On Qwen models (3B--14B), ReSpec achieves up to 4.5x speedup while preserving reward convergence and training stability, providing a practical solution for efficient RL-based LLM adaptation.

Speculative Decoding is a widely used technique to speed up inference for Large Language Models (LLMs) without sacrificing quality. When performing inference, speculative decoding uses a smaller draft model to generate speculative tokens and then uses the target LLM to verify those draft tokens. The speedup provided by speculative decoding heavily depends on the choice of the draft model. In this work, we perform a detailed study comprising over 350 experiments with LLaMA-65B and OPT-66B using speculative decoding and delineate the factors that affect the performance gain provided by speculative decoding. Our experiments indicate that the performance of speculative decoding depends heavily on the latency of the draft model, and the draft model's capability in language modeling does not correlate strongly with its performance in speculative decoding. Based on these insights we explore a new design space for draft models and design hardware-efficient draft models for speculative decoding. Our newly designed draft model for LLaMA-65B can provide 60% higher throughput than existing draft models and can generalize further to the LLaMA-2 model family and supervised fine-tuned models.

Speculative decoding has rapidly emerged as a leading approach for accelerating language model (LM) inference, as it offers substantial speedups while yielding identical outputs. This relies upon a small draft model, tasked with predicting the outputs of the target model. State-of-the-art speculative decoding methods use a draft model comprising a single decoder layer and output embedding matrix, with the latter dominating drafting time for the latest LMs. Recent work has sought to address this output distribution bottleneck by reducing the vocabulary of the draft model. While this can improve throughput, it compromises speculation effectiveness when the target token is out-of-vocabulary. In this paper, we argue for vocabulary speculation as an alternative to a reduced vocabulary. We propose SpecVocab, an efficient and effective method that selects a vocabulary subset per decoding step. Across a variety of tasks, we show that SpecVocab can achieve a higher acceptance length than state-of-the-art speculative decoding method, EAGLE-3. Notably, this yields up to an 8.1% increase in average throughput over EAGLE-3.

Speculative decoding accelerates large language model (LLM) inference by using a small draft model to propose candidate tokens that a larger target model verifies. A critical hyperparameter in this process is the speculation length γ, which determines how many tokens the draft model proposes per step. Nearly all existing systems use a fixed γ (typically 4), yet empirical evidence suggests that the optimal value varies across task types and, crucially, depends on the compression level applied to the target model. In this paper, we present SpecKV, a lightweight adaptive controller that selects γ per speculation step using signals extracted from the draft model itself. We profile speculative decoding across 4 task categories, 4 speculation lengths, and 3 compression levels (FP16, INT8, NF4), collecting 5,112 step-level records with per-step acceptance rates, draft entropy, and draft confidence. We demonstrate that the optimal γ shifts across compression regimes and that draft model confidence and entropy are strong predictors of acceptance rate (correlation approx 0.56). SpecKV uses a small MLP trained on these signals to maximize expected tokens per speculation step, achieving a 56.0% improvement over the fixed-γ=4 baseline with only 0.34 ms overhead per decision (<0.5% of step time). The improvement is statistically significant (p < 0.001, paired bootstrap test). We release all profiling data, trained models, and notebooks as open-source artifacts.

Diffusion models have garnered considerable interest in the field of text generation. Several studies have explored text diffusion models with different structures and applied them to various tasks, including named entity recognition and summarization. However, there exists a notable disparity between the "easy-first" text generation process of current diffusion models and the "keyword-first" natural text generation process of humans, which has received limited attention. To bridge this gap, we propose InfoDiffusion, a non-autoregressive text diffusion model. Our approach introduces a "keyinfo-first" generation strategy and incorporates a noise schedule based on the amount of text information. In addition, InfoDiffusion combines self-conditioning with a newly proposed partially noising model structure. Experimental results show that InfoDiffusion outperforms the baseline model in terms of generation quality and diversity, as well as exhibiting higher sampling efficiency.

In this manifesto, we put forward the idea of data alchemy as a narrative device to discuss storytelling and transdisciplinarity in visualization. If data is the prima materia of modern science, how does one perform the Great Work? We use text-to-image diffusion-based generative art to develop the concept, and structure our argument in ten propositions, as if they were ten issues of a comic novel on data alchemy: Ad Disco Diffusionem. To follow the argument, the reader must immerse themselves in our miro board, and navigate a multimedia semiotic topology that includes comics, videos, code demos, and ergotic literature in a true alchemic sense. By accessing this paradigm one might find new sources of inspiration for scientific inquiry in familiar places, or get lost in the creative exploration of the unknown. Our colorful, sometimes poetic, exposition should not distract the reader from the seriousness of the ideas discussed, but ultimately it is about the journey.

Modern Large Language Models achieve impressive reasoning capabilities with long Chain of Thoughts, but they incur substantial computational cost during inference, and this motivates techniques to improve the performance-cost ratio. Among these techniques, Speculative Decoding accelerates inference by employing a fast but inaccurate draft model to autoregressively propose tokens, which are then verified in parallel by a more capable target model. However, due to unnecessary rejections caused by token mismatches in semantically equivalent steps, traditional token-level Speculative Decoding struggles in reasoning tasks. Although recent works have shifted to step-level semantic verification, which improve efficiency by accepting or rejecting entire reasoning steps, existing step-level methods still regenerate many rejected steps with little improvement, wasting valuable target compute. To address this challenge, we propose Arbitrage, a novel step-level speculative generation framework that routes generation dynamically based on the relative advantage between draft and target models. Instead of applying a fixed acceptance threshold, Arbitrage uses a lightweight router trained to predict when the target model is likely to produce a meaningfully better step. This routing approximates an ideal Arbitrage Oracle that always chooses the higher-quality step, achieving near-optimal efficiency-accuracy trade-offs. Across multiple mathematical reasoning benchmarks, Arbitrage consistently surpasses prior step-level Speculative Decoding baselines, reducing inference latency by up to sim2times at matched accuracy.

Diffusion models have been central to the development of recent image, video, and even text generation systems. They posses striking geometric properties that can be faithfully portrayed in low-dimensional settings. However, existing resources for explaining diffusion either require an advanced theoretical foundation or focus on their neural network architectures rather than their rich geometric properties. We introduce Diffusion Explorer, an interactive tool to explain the geometric properties of diffusion models. Users can train 2D diffusion models in the browser and observe the temporal dynamics of their sampling process. Diffusion Explorer leverages interactive animation, which has been shown to be a powerful tool for making engaging visualizations of dynamic systems, making it well suited to explaining diffusion models which represent stochastic processes that evolve over time. Diffusion Explorer is open source and a live demo is available at alechelbling.com/Diffusion-Explorer.

Speculative decoding (SD) has emerged as a powerful method for accelerating autoregressive generation in large language models (LLMs), yet its integration into vision-language models (VLMs) remains underexplored. We introduce DREAM, a novel speculative decoding framework tailored for VLMs that combines three key innovations: (1) a cross-attention-based mechanism to inject intermediate features from the target model into the draft model for improved alignment, (2) adaptive intermediate feature selection based on attention entropy to guide efficient draft model training, and (3) visual token compression to reduce draft model latency. DREAM enables efficient, accurate, and parallel multimodal decoding with significant throughput improvement. Experiments across a diverse set of recent popular VLMs, including LLaVA, Pixtral, SmolVLM and Gemma3, demonstrate up to 3.6x speedup over conventional decoding and significantly outperform prior SD baselines in both inference throughput and speculative draft acceptance length across a broad range of multimodal benchmarks. The code is publicly available at: https://github.com/SAI-Lab-NYU/DREAM.git

We present Seed Diffusion Preview, a large-scale language model based on discrete-state diffusion, offering remarkably fast inference speed. Thanks to non-sequential, parallel generation, discrete diffusion models provide a notable speedup to mitigate the inherent latency of token-by-token decoding, as demonstrated recently (e.g., Mercury Coder, Gemini Diffusion). Seed Diffusion Preview achieves an inference speed of 2,146 token/s over H20 GPUs while maintaining competitive performance across a sweep of standard code evaluation benchmarks, significantly faster than contemporary Mercury and Gemini Diffusion, establishing new state of the art on the speed-quality Pareto frontier for code models.

Speculative decoding (SD) has become a popular technique to accelerate Large Language Model (LLM) inference, yet its real-world effectiveness remains unclear as prior evaluations rely on research prototypes and unrealistically small batch sizes. We present, to our knowledge, the first systematic study of SD on a production-grade and widely deployed inference engine (vLLM), covering multiple SD variants (n-gram, EAGLE/EAGLE-3, Draft-Model, Multi-Token Prediction) across diverse workloads, model scales, and batch sizes. We analyze key factors governing SD performance, and quantify a theoretical upper bound on SD speedup. Our results show that verification by the target model dominates the execution, while acceptance length varies markedly across output token positions, requests, and datasets. Comparing measured performance with theoretical bounds reveals substantial gaps between observed and theoretical upper bounds, and we leverage this observation to highlight new research opportunities that our study opens up in improving SD.

We propose the Fourier Adaptive Lite Diffusion Architecture (FALDA), a novel probabilistic framework for time series forecasting. First, we introduce the Diffusion Model for Residual Regression (DMRR) framework, which unifies diffusion-based probabilistic regression methods. Within this framework, FALDA leverages Fourier-based decomposition to incorporate a component-specific architecture, enabling tailored modeling of individual temporal components. A conditional diffusion model is utilized to estimate the future noise term, while our proposed lightweight denoiser, DEMA (Decomposition MLP with AdaLN), conditions on the historical noise term to enhance denoising performance. Through mathematical analysis and empirical validation, we demonstrate that FALDA effectively reduces epistemic uncertainty, allowing probabilistic learning to primarily focus on aleatoric uncertainty. Experiments on six real-world benchmarks demonstrate that FALDA consistently outperforms existing probabilistic forecasting approaches across most datasets for long-term time series forecasting while achieving enhanced computational efficiency without compromising accuracy. Notably, FALDA also achieves superior overall performance compared to state-of-the-art (SOTA) point forecasting approaches, with improvements of up to 9%.

We are witnessing rapid progress in automatically generating and manipulating 3D assets due to the availability of pretrained text-image diffusion models. However, time-consuming optimization procedures are required for synthesizing each sample, hindering their potential for democratizing 3D content creation. Conversely, 3D diffusion models now train on million-scale 3D datasets, yielding high-quality text-conditional 3D samples within seconds. In this work, we present Spice-E - a neural network that adds structural guidance to 3D diffusion models, extending their usage beyond text-conditional generation. At its core, our framework introduces a cross-entity attention mechanism that allows for multiple entities (in particular, paired input and guidance 3D shapes) to interact via their internal representations within the denoising network. We utilize this mechanism for learning task-specific structural priors in 3D diffusion models from auxiliary guidance shapes. We show that our approach supports a variety of applications, including 3D stylization, semantic shape editing and text-conditional abstraction-to-3D, which transforms primitive-based abstractions into highly-expressive shapes. Extensive experiments demonstrate that Spice-E achieves SOTA performance over these tasks while often being considerably faster than alternative methods. Importantly, this is accomplished without tailoring our approach for any specific task.

In this work, we aim to reconcile several apparently contradictory observations in market microstructure: is the famous "square-root law" of metaorder impact, which decays with time, compatible with the random-walk nature of prices and the linear impact of order imbalances? Can one entirely explain the volatility of prices as resulting from the flow of uninformed metaorders that mechanically impact them? We introduce a new theoretical framework to describe metaorders with different signs, sizes and durations, which all impact prices as a square-root of volume but with a subsequent time decay. We show that, as in the original propagator model, price diffusion is ensured by the long memory of cross-correlations between metaorders. In order to account for the effect of strongly fluctuating volumes q of individual trades, we further introduce two q-dependent exponents, which allow us to describe how the moments of generalized volume imbalance and the correlation between price changes and generalized order flow imbalance scale with T. We predict in particular that the corresponding power-laws depend in a non-monotonic fashion on a parameter a, which allows one to put the same weight on all child orders or to overweight large ones, a behaviour that is clearly borne out by empirical data. We also predict that the correlation between price changes and volume imbalances should display a maximum as a function of a, which again matches observations. Such noteworthy agreement between theory and data suggests that our framework correctly captures the basic mechanism at the heart of price formation, namely the average impact of metaorders. We argue that our results support the "Order-Driven" theory of excess volatility, and are at odds with the idea that a "Fundamental" component accounts for a large share of the volatility of financial markets.

Speculative decoding (SD) accelerates large language model inference by using a smaller draft model to predict multiple tokens, which are then verified in parallel by the larger target model. However, the limited capacity of the draft model often necessitates tree-based sampling to improve prediction accuracy, where multiple candidates are generated at each step. We identify a key limitation in this approach: the candidates at the same step are derived from the same representation, limiting diversity and reducing overall effectiveness. To address this, we propose Jakiro, leveraging Mixture of Experts (MoE), where independent experts generate diverse predictions, effectively decoupling correlations among candidates. Furthermore, we introduce a hybrid inference strategy, combining autoregressive decoding for initial tokens with parallel decoding for subsequent stages, and enhance the latter with contrastive mechanism in features to improve accuracy. Our method significantly boosts prediction accuracy and achieves higher inference speedups. Extensive experiments across diverse models validate the effectiveness and robustness of our approach, establishing a new SOTA in speculative decoding. Our codes are available at https://github.com/haiduo/Jakiro.

Speculative decoding is an inference-acceleration method for large language models (LLMs) where a small language model generates a draft-token sequence which is further verified by the target LLM in parallel. Recent works have advanced this method by establishing a draft-token tree, achieving superior performance over a single-sequence speculative decoding. However, those works independently generate tokens at each level of the tree, not leveraging the tree's entire diversifiability. Besides, their empirical superiority has been shown for fixed length of sequences, implicitly granting more computational resource to LLM for the tree-based methods. None of the existing works has conducted empirical studies with fixed target computational budgets despite its importance to resource-bounded devices. We present Recursive Speculative Decoding (RSD), a novel tree-based method that samples draft tokens without replacement and maximizes the diversity of the tree. During RSD's drafting, the tree is built by either Gumbel-Top-k trick that draws tokens without replacement in parallel or Stochastic Beam Search that samples sequences without replacement while early-truncating unlikely draft sequences and reducing the computational cost of LLM. We empirically evaluate RSD with Llama 2 and OPT models, showing that RSD outperforms the baseline methods, consistently for fixed draft sequence length and in most cases for fixed computational budgets at LLM.

Diffusion models are a class of generative models that learn to synthesize samples by inverting a diffusion process that gradually maps data into noise. While these models have enjoyed great success recently, a full theoretical understanding of their observed properties is still lacking, in particular, their weak sensitivity to the choice of noise family and the role of adequate scheduling of noise levels for good synthesis. By identifying a correspondence between diffusion models and a well-known paradigm in cognitive science known as serial reproduction, whereby human agents iteratively observe and reproduce stimuli from memory, we show how the aforementioned properties of diffusion models can be explained as a natural consequence of this correspondence. We then complement our theoretical analysis with simulations that exhibit these key features. Our work highlights how classic paradigms in cognitive science can shed light on state-of-the-art machine learning problems.

Recently, diffusion models have garnered significant interest in the field of text processing due to their many potential advantages compared to conventional autoregressive models. In this work, we propose Diffusion-of-Thought (DoT), a novel approach that integrates diffusion models with Chain-of-Thought, a well-established technique for improving the reasoning ability of autoregressive language models. In contrast to autoregressive language models that make decisions in a left-to-right, token-by-token manner, DoT allows reasoning steps to diffuse over time through a diffusion language model and offers greater flexibility in trading-off computation for reasoning performance. Our experimental results demonstrate the effectiveness of DoT in multi-digit multiplication, boolean logic, and grade school math problems, with a small diffusion model outperforming a much larger autoregressive model in both efficiency and accuracy. In addition to that, DoT showcases promising self-correction abilities and benefits from existing reasoning-enhancing techniques like self-consistency decoding. Our findings contribute to the understanding and development of reasoning with diffusion language models.

Diffusion models are a class of probabilistic generative models that have been widely used as a prior for image processing tasks like text conditional generation and inpainting. We demonstrate that these models can be adapted to make predictions and provide uncertainty quantification for chaotic dynamical systems. In these applications, diffusion models can implicitly represent knowledge about outliers and extreme events; however, querying that knowledge through conditional sampling or measuring probabilities is surprisingly difficult. Existing methods for conditional sampling at inference time seek mainly to enforce the constraints, which is insufficient to match the statistics of the distribution or compute the probability of the chosen events. To achieve these ends, optimally one would use the conditional score function, but its computation is typically intractable. In this work, we develop a probabilistic approximation scheme for the conditional score function which provably converges to the true distribution as the noise level decreases. With this scheme we are able to sample conditionally on nonlinear userdefined events at inference time, and matches data statistics even when sampling from the tails of the distribution.

Speculative decoding has emerged as a powerful method to improve latency and throughput in hosting large language models. However, most existing implementations focus on generating a single sequence. Real-world generative AI applications often require multiple responses and how to perform speculative decoding in a batched setting while preserving its latency benefits poses non-trivial challenges. This paper describes a system of batched speculative decoding that sets a new state of the art in multi-sequence generation latency and that demonstrates superior GPU utilization as well as quality of generations within a time budget. For example, for a 7.8B-size model on a single A100 GPU and with a batch size of 8, each sequence is generated at an average speed of 5.8ms per token, the overall throughput being 1.1K tokens per second. These results represent state-of-the-art latency and a 2.15X speed-up over optimized regular decoding. Within a time budget that regular decoding does not finish, our system is able to generate sequences with HumanEval Pass@First of 43% and Pass@All of 61%, far exceeding what's feasible with single-sequence speculative decoding. Our peak GPU utilization during decoding reaches as high as 15.8%, more than 3X the highest of that of regular decoding and around 10X of single-sequence speculative decoding.

Speculative decoding has emerged as a promising approach to accelerate autoregressive inference in large language models (LLMs). Self-draft methods, which leverage the base LLM itself for speculation, avoid the overhead of auxiliary draft models but face limitations: shallow layers often produce overconfident yet incorrect token predictions, and the presence of difficult tokens in a draft sequence forces redundant computation through deeper layers, undermining both draft acceptance and overall speedup. To address these issues, we propose a novel self-draft framework that suppresses spurious confidence via layer-wise temperature annealing in early-exit decision and adaptively bounds speculation length based on token-wise decoding difficulty. By reprocessing the hidden states of draft tokens in a unified parallel pass through deep layers, our method maintains exact output equivalence with the original model while maximizing computational efficiency. It requires no modifications to the base LLM parameters and achieves up to 2.33x wall-time speedup over standard autoregressive decoding across diverse long-form generation tasks and multiple model architectures.

Speculative decoding accelerates LLM inference by using a draft model to look ahead, but gains are capped by the cost of autoregressive draft generation: increasing draft size elevates acceptance rates but introduces additional latency overhead exacerbating the speed-accuracy tradeoff. Prior methods (Medusa, Hydra, EAGLE) partially reduce draft cost but either degrade acceptance or introduce overheads that limit scaling. We present Mirror Speculative Decoding (Mirror-SD), an inference algorithm that breaks the latency-acceptance tradeoff. Mirror-SD launches branch-complete rollouts from early-exit signals in parallel with the target model's suffix and explicitly maps computation across heterogeneous accelerators (GPU and NPU) to exploit cross-device parallelism. The draft speculates forward continuations for the target to verify, while the target simultaneously speculates correction paths for the draft, converting speculation into two complementary execution pipelines. To further cut draft latency without weakening acceptance semantics, we add speculative streaming so the draft emits multiple tokens per step. This dual strategy of parallel heterogeneous execution plus multi-token speculative streaming pushes speculative decoding toward its ideal regime of high acceptance with low overhead. On SpecBench with server-scale models from 14B to 66B parameters, Mirror-SD delivers consistent end-to-end gains, achieving 2.8x-5.8x wall-time speedups across diverse tasks and a 30% average relative improvement over the strongest baseline, EAGLE3.

Existing approaches for analyzing neural network activations, such as PCA and sparse autoencoders, rely on strong structural assumptions. Generative models offer an alternative: they can uncover structure without such assumptions and act as priors that improve intervention fidelity. We explore this direction by training diffusion models on one billion residual stream activations, creating "meta-models" that learn the distribution of a network's internal states. We find that diffusion loss decreases smoothly with compute and reliably predicts downstream utility. In particular, applying the meta-model's learned prior to steering interventions improves fluency, with larger gains as loss decreases. Moreover, the meta-model's neurons increasingly isolate concepts into individual units, with sparse probing scores that scale as loss decreases. These results suggest generative meta-models offer a scalable path toward interpretability without restrictive structural assumptions. Project page: https://generative-latent-prior.github.io.

Colloquially speaking, image generation models based upon diffusion processes are frequently said to exhibit "hallucinations," samples that could never occur in the training data. But where do such hallucinations come from? In this paper, we study a particular failure mode in diffusion models, which we term mode interpolation. Specifically, we find that diffusion models smoothly "interpolate" between nearby data modes in the training set, to generate samples that are completely outside the support of the original training distribution; this phenomenon leads diffusion models to generate artifacts that never existed in real data (i.e., hallucinations). We systematically study the reasons for, and the manifestation of this phenomenon. Through experiments on 1D and 2D Gaussians, we show how a discontinuous loss landscape in the diffusion model's decoder leads to a region where any smooth approximation will cause such hallucinations. Through experiments on artificial datasets with various shapes, we show how hallucination leads to the generation of combinations of shapes that never existed. Finally, we show that diffusion models in fact know when they go out of support and hallucinate. This is captured by the high variance in the trajectory of the generated sample towards the final few backward sampling process. Using a simple metric to capture this variance, we can remove over 95% of hallucinations at generation time while retaining 96% of in-support samples. We conclude our exploration by showing the implications of such hallucination (and its removal) on the collapse (and stabilization) of recursive training on synthetic data with experiments on MNIST and 2D Gaussians dataset. We release our code at https://github.com/locuslab/diffusion-model-hallucination.

Leveraging the visual priors of pre-trained text-to-image diffusion models offers a promising solution to enhance zero-shot generalization in dense prediction tasks. However, existing methods often uncritically use the original diffusion formulation, which may not be optimal due to the fundamental differences between dense prediction and image generation. In this paper, we provide a systemic analysis of the diffusion formulation for the dense prediction, focusing on both quality and efficiency. And we find that the original parameterization type for image generation, which learns to predict noise, is harmful for dense prediction; the multi-step noising/denoising diffusion process is also unnecessary and challenging to optimize. Based on these insights, we introduce Lotus, a diffusion-based visual foundation model with a simple yet effective adaptation protocol for dense prediction. Specifically, Lotus is trained to directly predict annotations instead of noise, thereby avoiding harmful variance. We also reformulate the diffusion process into a single-step procedure, simplifying optimization and significantly boosting inference speed. Additionally, we introduce a novel tuning strategy called detail preserver, which achieves more accurate and fine-grained predictions. Without scaling up the training data or model capacity, Lotus achieves SoTA performance in zero-shot depth and normal estimation across various datasets. It also significantly enhances efficiency, being hundreds of times faster than most existing diffusion-based methods.

Speculative decoding enhances the efficiency of large language models (LLMs) by leveraging a draft model to draft for a larger target model to review. However, drafting in speculative decoding involves slow autoregressive generation and generating tokens of different importance with the same time allocation. These two inefficiencies lead to its suboptimal performance. To address this issue, we introduce Cascade Speculative Drafting (CS. Drafting), a novel approach that employs two types of cascades. The Vertical Cascade eliminates autoregressive generation from neural models. The Horizontal Cascade constitutes efficient time allocation in drafting with its optimality supported by our theoretical analysis. Combining both cascades, our CS. Drafting algorithm has achieved up to 72 percent additional speedup over speculative decoding in our experiments while keeping the same output distribution.

We consider multi-draft speculative sampling, where the proposal sequences are sampled independently from different draft models. At each step, a token-level draft selection scheme takes a list of valid tokens as input and produces an output token whose distribution matches that of the target model. Previous works have demonstrated that the optimal scheme (which maximizes the probability of accepting one of the input tokens) can be cast as a solution to a linear program. In this work we show that the optimal scheme can be decomposed into a two-step solution: in the first step an importance sampling (IS) type scheme is used to select one intermediate token; in the second step (single-draft) speculative sampling is applied to generate the output token. For the case of two identical draft models we further 1) establish a necessary and sufficient condition on the distributions of the target and draft models for the acceptance probability to equal one and 2) provide an explicit expression for the optimal acceptance probability. Our theoretical analysis also motives a new class of token-level selection scheme based on weighted importance sampling. Our experimental results demonstrate consistent improvements in the achievable block efficiency and token rates over baseline schemes in a number of scenarios.

We present speculative sampling, an algorithm for accelerating transformer decoding by enabling the generation of multiple tokens from each transformer call. Our algorithm relies on the observation that the latency of parallel scoring of short continuations, generated by a faster but less powerful draft model, is comparable to that of sampling a single token from the larger target model. This is combined with a novel modified rejection sampling scheme which preserves the distribution of the target model within hardware numerics. We benchmark speculative sampling with Chinchilla, a 70 billion parameter language model, achieving a 2-2.5x decoding speedup in a distributed setup, without compromising the sample quality or making modifications to the model itself.