Daily Papers

Regret minimization in streaming multi-armed bandits (MABs) has been studied extensively in recent years. In the single-pass setting with K arms and T trials, a regret lower bound of Omega(T^{2/3}) has been proved for any algorithm with o(K) memory (Maiti et al. [NeurIPS'21]; Agarwal at al. [COLT'22]). On the other hand, however, the previous best regret upper bound is still O(K^{1/3} T^{2/3}log^{1/3}(T)), which is achieved by the streaming implementation of the simple uniform exploration. The O(K^{1/3}log^{1/3}(T)) gap leaves the open question of the tight regret bound in the single-pass MABs with sublinear arm memory. In this paper, we answer this open problem and complete the picture of regret minimization in single-pass streaming MABs. We first improve the regret lower bound to Omega(K^{1/3}T^{2/3}) for algorithms with o(K) memory, which matches the uniform exploration regret up to a logarithm factor in T. We then show that the log^{1/3}(T) factor is not necessary, and we can achieve O(K^{1/3}T^{2/3}) regret by finding an varepsilon-best arm and committing to it in the rest of the trials. For regret minimization with high constant probability, we can apply the single-memory varepsilon-best arm algorithms in Jin et al. [ICML'21] to obtain the optimal bound. Furthermore, for the expected regret minimization, we design an algorithm with a single-arm memory that achieves O(K^{1/3} T^{2/3}log(K)) regret, and an algorithm with O(log^{*}(n))-memory with the optimal O(K^{1/3} T^{2/3}) regret following the varepsilon-best arm algorithm in Assadi and Wang [STOC'20]. We further tested the empirical performances of our algorithms. The simulation results show that the proposed algorithms consistently outperform the benchmark uniform exploration algorithm by a large margin, and on occasion, reduce the regret by up to 70%.

A scientific agent can give the same verdict while reading and citing different evidence. BioAgent-DF tests this separation using paired reference and candidate values saved at the same scientific computation site. It restores or transplants those values at their original coordinates, then runs the agent on healthy hardware. Across eight SciFact batches, Qwen3.5-4B shows repeatable citation changes in three capture-claim combinations, and Gemma 3 4B IT shows repeatable read and citation changes in four. These seven combinations cover two claims. Full restoration recovers the reference evidence sets while verdicts remain unchanged. Verdict changes observed under the baseline prompt did not recur under the explicit-example prompt. Complementary tool and optimizer experiments distinguish recovery of numerical state, recovery of ranked lists, and restoration of an agent's visible history. These results show that an audit should track both the evidence an agent uses and its final answer. In hERG cardiac-safety assay allocation, silent numerical faults changed testing decisions while the fixed-budget shortlist kept the same number of compounds labeled as blockers. After the agent had used faulty values, restoring its earlier execution state and supplying certified scores recovered all 39 changed decisions, whereas replacing the prediction file recovered none; no incorrect action was committed. A streaming implementation of the arithmetic checks reduced the total time for forward execution and verification by 42.4% relative to the original FP64 implementation, with identical flags and recovery outputs.

Weight-activation quantization can reduce the memory and compute cost of neural-network inference, but recent methods often require expensive optimization and architecture-specific propagation of basis transforms across layers. We introduce MACaQ, an MXFP4 W4A4 post-training quantization method that treats every linear layer independently. MACaQ applies a per-channel scale and a block-Hadamard transform online to each layer's activations, while absorbing the corresponding inverse transforms into its weights. Retaining these transforms online avoids cross-layer dependencies and enables a simple streaming implementation of the quantization process, in which only one layer must reside in memory at a time. To improve over round-to-nearest quantization, we introduce Flip-Refinement, a Hessian-aware coordinate-descent procedure that greedily moves individual FP4 codes to adjacent representable values. Despite executing the activation transforms at inference time, MACaQ adds only 2.3% end-to-end overhead over pure MXFP4 on Qwen3-32B in vLLM. MACaQ reaches lower perplexity than DuQuant++ and MR-GPTQ, and already matches their best perplexity on Llama-3-8B in 11 times less quantization time. We further apply MACaQ without architecture-specific modifications to an image diffusion model, illustrating the generality of its layer-local design and show quantization of a 122B parameter model in 64 minutes, using only 32.5GB GPU RAM.

Conventional transformer inference engines are request-driven, paying an O(n) prefill cost on every query. In streaming workloads, where data arrives continuously and queries probe an ever-growing context, this cost is prohibitive. We introduce a data-driven computational model centred on stateful sessions: a persistent KV cache advanced incrementally as new data arrives, so prefill is moved off the critical path and query latency becomes O(|q|), independent of accumulated context size. Building on this, Flash Queries reclaim idle GPU cycles between data arrivals to pre-evaluate registered questions and return cached answers before the user asks, a pattern that is structurally impossible in stateless engines because they discard intermediate state between requests. A multi-tenant continuous-batching scheduler with cell-budget admission and prefix-aware grouped prefill lets dozens of stateful sessions coexist on a single GPU while preserving full quadratic self-attention. On streaming market-data benchmarks the reference implementation achieves up to 5.9x speedup over conventional inference engines (vLLM, SGLang, TensorRT-LLM, llama.cpp), holding query latency constant as accumulated context grows.

Strong solar activity is often accompanied by a variety of radio bursts. These bursts are valuable diagnostics of coronal and heliospheric processes and also have potential applications in space weather monitoring and forecasting. However, space weather applications require low-latency, high-sensitivity radio burst recording and reporting capabilities, which have remained limited. In this work, we present the development of a near-realtime radio burst recording and reporting system using the Owens Valley Radio Observatory Long Wavelength Array. The system directly clips data from a realtime buffer and streams them as a live radio dynamic spectrogram. These spectrograms are then processed by a deep-learning-based burst identification module for type III radio bursts. The identifier is based on a YOLO (You Only Look Once) architecture and is trained on synthetic type III radio bursts generated using a physics-based model to achieve accurate and robust detection. This system enables continuous realtime radio spectrum streaming and automatic reporting of type III radio bursts within approximately 10 seconds of their occurrence.

Streaming text-to-speech is essential for low-latency spoken dialogue systems, yet many systems wait for sentence-level text and are therefore only pseudo-streaming. True token-level synthesis must generate speech from uncertain prefixes while maintaining perceptual continuity over an unbounded stream with bounded context. We present X2Streaming-TTS, a causal TTS framework that consumes asynchronously arriving text tokens and emits speech without accessing future input. To handle uncertain prefixes, we introduce causal commitment, which keeps ambiguous expressions provisional through uncertainty-aware buffering and performs capacity-adaptive, punctuation-aware segmentation. To preserve acoustic continuity, we further introduce causal speech-state inheritance, which carries the complete Code2Wav state and selected historical Talker states across segment boundaries. Together with an attention prior constraint, it blocks access to future positions while retaining bounded acoustic context. Experiments show that X2Streaming-TTS outperforms existing pseudo-streaming models on most subjective and objective metrics. Further analysis shows that causal commitment stabilizes online segmentation and reduces failures caused by insufficient context, while speech-state inheritance improves boundary continuity without degrading naturalness or speaker identity. X2Streaming-TTS thus achieves strict token-level synthesis with quality comparable to the evaluated offline baselines, a median time to first audio token (TTFT) of 15.8 ms for a single request, and a median TTFT of 260.8 ms at 128 concurrent requests. Our implementation is publicly available at https://github.com/X-Square-Robot/X2Streaming-TTS .

Background Restriction site-associated DNA sequencing (RAD-seq) is widely used to discover sex-linked markers in non-model organisms, and RADSex provides the reference workflow for building marker-by-individual depth tables and testing sex-biased marker distributions. Its table-building commands grow memory-hungry as panels reach millions of RAD tags, it reports frequentist calls with no posterior evidence, and it offers no Python or C interface. Results rsx is a Rust implementation of the complete RADSex command set that preserves marker-table semantics and command-line compatibility. It combines 2-bit DNA keys, parallel ingestion, memory-mapped tables, external sorting, bitset group counts and a streamed Gram matrix so that writable allocations stay bounded by the number of individuals or by an explicit buffer, with false-discovery-rate ranking the one deliberate exception. Conjugate Beta-Binomial Bayes factors and directional posteriors grade each marker as a strict call, a posterior-supported hypothesis or a Bayes-factor-only row, and an optional CUDA backend batches the per-marker arithmetic on the GPU. On four published RAD-seq panels comprising 41.9 billion sequenced bases, rsx reproduced the RADSex v1.2.0 calls, recovered every Bonferroni-significant positive-control marker, and was 8.38-fold faster in geometric mean across 56 paired timings; the CUDA backend adds up to 29.86-fold on the p-value batch. Python and C bindings drive the same core from notebooks and pipelines. Conclusions rsx is an allocation-bounded, statistically extended replacement for RADSex that stays backward-compatible and reports its evidence in explicit grades. It is released under the GPL-3.0-or-later licence, with a reproducibility archive covering every reported number.

Semi-Markov Conditional Random Fields (semi-CRFs) assign labels to segments of a sequence rather than to individual positions, enabling exact inference over segment-level features and principled uncertainty estimates at their boundaries. However, existing implementations must materialize a large edge potential tensor whose size grows with sequence length, maximum segment length, and label count, becoming prohibitive for speech-scale state spaces and intractable at genomic scales where sequences can exceed 100,000 positions. This memory bottleneck has limited the adoption of exact segment-level inference for long sequences and large label sets. We identify that the core inefficiency is materializing edge potentials that can instead be evaluated on-the-fly from a compact prefix-sum array, and make several improvements. First, replacing the stored edge tensor with prefix-sum lookup reduces the memory footprint by a factor proportional to the product of segment length and label count. Second, a streaming forward-backward pass with checkpoint-boundary normalization keeps working memory sublinear in sequence length while preserving exact gradients. Third, zero-centered cumulative scores control numerical drift and induce an adaptive duration prior under label imbalance. We integrate these ideas into Flash-SemiCRF, a fused Triton kernel that enables exact semi-CRF inference on previously intractable problem sizes. Available at https://github.com/biobenkj/flash-semicrf.

We present FloodDiffusion, a new framework for text-driven, streaming human motion generation. Given time-varying text prompts, FloodDiffusion generates text-aligned, seamless motion sequences with real-time latency. Unlike existing methods that rely on chunk-by-chunk or auto-regressive model with diffusion head, we adopt a diffusion forcing framework to model this time-series generation task under time-varying control events. We find that a straightforward implementation of vanilla diffusion forcing (as proposed for video models) fails to model real motion distributions. We demonstrate that to guarantee modeling the output distribution, the vanilla diffusion forcing must be tailored to: (i) train with a bi-directional attention instead of casual attention; (ii) implement a lower triangular time scheduler instead of a random one; (iii) utilize a continues time-varying way to introduce text conditioning. With these improvements, we demonstrate in the first time that the diffusion forcing-based framework achieves state-of-the-art performance on the streaming motion generation task, reaching an FID of 0.057 on the HumanML3D benchmark. Models, code, and weights are available. https://shandaai.github.io/FloodDiffusion/

Industrial recommenders increasingly adopt the pretrain-then-transfer paradigm, yet behavioral distribution drift raises two questions: what to learn from behavior sequences, and how to transfer the learned knowledge while the pretrained model is continually refreshed. To resolve them, we propose Knowledge-Geometry Decoupling (KGD). For what to learn, conventional next-token prediction treats adjacency as dependency and may encode spurious transitions across unrelated sessions. We introduce Behavioral Multi-Token Prediction (BMTP) to retain only collaboratively or semantically related future items as supervision, yielding cleaner and more transferable behavioral knowledge. For how to transfer, pretrained knowledge and task-specific geometry impose conflicting optimization demands on shared parameters. To handle it, KGD assigns them to separate parameter sets: a refreshable encoder owns behavioral knowledge, while a task learner reads contextualized encoder states through read-only cross-attention and writes task-specific geometry through Anchored Calibration Residual (ACR) orthogonal to the pretrained embedding. The decoupled ownership enables continual knowledge refresh without task-gradient interference or invalidating downstream adaptation. KGD improves over strong pretrain-transfer baselines by 4-12% on eight public benchmarks and sustains its advantage over a 90-day production stream where baselines show no gains. KGD has been fully deployed in Shopee. In a live A/B test on Shopee Homepage Search, it increases GMV per user by 1.75% and advertising revenue by 1.53%, demonstrating its high practical value. We provide the core implementation of KGD at https://github.com/FuCongResearchSquad/KGD4REC.

Speaker anonymization aims to conceal cues to speaker identity while preserving linguistic content. Current machine learning based approaches require substantial computational resources, hindering real-time streaming applications. To address these concerns, we propose a streaming model that achieves speaker anonymization with low latency. The system is trained in an end-to-end autoencoder fashion using a lightweight content encoder that extracts HuBERT-like information, a pretrained speaker encoder that extract speaker identity, and a variance encoder that injects pitch and energy information. These three disentangled representations are fed to a decoder that re-synthesizes the speech signal. We present evaluation results from two implementations of our system, a full model that achieves a latency of 230ms, and a lite version (0.1x in size) that further reduces latency to 66ms while maintaining state-of-the-art performance in naturalness, intelligibility, and privacy preservation.

Retrievers, which form one of the most important recommendation stages, are responsible for efficiently selecting possible positive samples to the later stages under strict latency limitations. Because of this, large-scale systems always rely on approximate calculations and indexes to roughly shrink candidate scale, with a simple ranking model. Considering simple models lack the ability to produce precise predictions, most of the existing methods mainly focus on incorporating complicated ranking models. However, another fundamental problem of index effectiveness remains unresolved, which also bottlenecks complication. In this paper, we propose a novel index structure: streaming Vector Quantization model, as a new generation of retrieval paradigm. Streaming VQ attaches items with indexes in real time, granting it immediacy. Moreover, through meticulous verification of possible variants, it achieves additional benefits like index balancing and reparability, enabling it to support complicated ranking models as existing approaches. As a lightweight and implementation-friendly architecture, streaming VQ has been deployed and replaced all major retrievers in Douyin and Douyin Lite, resulting in remarkable user engagement gain.

This is an implementation and measurement study of what it costs to run a streaming speech enhancer on a CPU. We port FastEnhancer-Medium at 48 kHz to faster-enhancer.c, a C runtime with six int8 GEMM tiers selected at initialization, leaving architecture and weights untouched. One Apple M2 core reaches 0.069 real-time factor, against 0.230 for the fp32 ONNX Runtime graph on the same machine, a 3.3x speedup. A Galaxy S23+ (Snapdragon 8 Gen 2) reaches 0.096. The speedup comes from specializing every layer of the runtime around one fixed model. Activation ranges are recomputed per frame, so no calibration set is needed; the k=3 convolutions use Winograd F(2,3); cross-stage state is fp16; the GRU and the dequantization epilogues are fused; and nothing is allocated after startup. Over 824 VoiceBank-DEMAND utterances the engine tracks fp32 to within -0.006 PESQ and -0.08 dB SNR. Speed alone does not settle deployment cost. The enhancer holds a fraction of a core for as long as the microphone is open, so its real-time factor is a duty cycle. A benchmark races through a file; an audio callback does not. Pacing to the 6.67 ms deadline costs 4.2x per frame, saves 49% of the energy, and leaves the cheapest core placement missing 96% of its deadlines. All SIMD tiers within an architecture family emit byte-identical output. The runtime is released as a dependency-free library.

Deploying modern Speech Language Models (SpeechLMs) in streaming settings requires systems that provide low latency, high throughput, and strong guarantees of streamability. Existing systems fall short of supporting diverse models flexibly and efficiently. We present VoxServe, a unified serving system for SpeechLMs that optimizes streaming performance. VoxServe introduces a model-execution abstraction that decouples model architecture from system-level optimizations, thereby enabling support for diverse SpeechLM architectures within a single framework. Building on this abstraction, VoxServe implements streaming-aware scheduling and an asynchronous inference pipeline to improve end-to-end efficiency. Evaluations across multiple modern SpeechLMs show that VoxServe achieves 10-20x higher throughput than existing implementations at comparable latency while maintaining high streaming viability. The code of VoxServe is available at https://github.com/vox-serve/vox-serve.

We systematically explored a spectrum of normalization algorithms related to Batch Normalization (BN) and propose a generalized formulation that simultaneously solves two major limitations of BN: (1) online learning and (2) recurrent learning. Our proposal is simpler and more biologically-plausible. Unlike previous approaches, our technique can be applied out of the box to all learning scenarios (e.g., online learning, batch learning, fully-connected, convolutional, feedforward, recurrent and mixed --- recurrent and convolutional) and compare favorably with existing approaches. We also propose Lp Normalization for normalizing by different orders of statistical moments. In particular, L1 normalization is well-performing, simple to implement, fast to compute, more biologically-plausible and thus ideal for GPU or hardware implementations.

Transformer models serve as the backbone of many state-ofthe-art language models, and most use the scaled dot-product attention (SDPA) mechanism to capture relationships between tokens. However, the straightforward implementation of SDPA has quadratic compute and memory complexity with respect to the sequence length. On processor architectures such as GPUs and TPUs, there is a robust body of prior work. However, little work has been performed on non-processor architectures.In this work, we show how the architecture and execution model of Streaming Dataflow Accelerators can help tackle this challenge. We first define abstract hardware that adopts a streaming execution model, and we implement a cycle-accurate simulator of the abstract hardware using the Dataflow Abstract Machine simulation framework. Second, we implement the naive SDPA algorithm on this abstract hardware and show it requires linear (O(N)) intermediate memory. Third, we then modify the naive algorithm, taking inspiration from prior processor-oriented works, by reordering the multiplication and division operations. Finally, we map the modified algorithm to abstract hardware, and confirm that the implementation computes SDPA at full throughput while only using a constant amount (O(1)) of intermediate memory.

Neural audio codecs optimized for mel-spectrogram reconstruction often fail to preserve intelligibility. While semantic encoder distillation improves encoded representations, it does not guarantee content preservation in reconstructed speech. In this work, we demonstrate that self-supervised representation reconstruction (SSRR) loss fundamentally improves codec training and performance. First, SSRR significantly accelerates convergence, enabling competitive results using only a single GPU. Second, it enhances intelligibility by reconstructing distilled self-supervised representations from codec outputs. Third, SSRR enables high intelligibility without additional lookahead in streaming Transformer-based codecs, allowing a zero-lookahead architecture for real-time deployment. As a result, our JHCodec achieves state-of-the-art performance while maintaining minimal latency and reduced training cost. We open-source the full implementation, training pipeline, and demo on Github https://github.com/jhcodec843/jhcodec.

Unification of automatic speech recognition (ASR) systems reduces development and maintenance costs, but training a single model to perform well in both offline and low-latency streaming settings remains challenging. We present a Unified ASR framework for Transducer (RNNT) training that supports both offline and streaming decoding within a single model, using chunk-limited attention with right context and dynamic chunked convolutions. To further close the gap between offline and streaming performance, we introduce an efficient Triton implementation of mode-consistency regularization for RNNT (MCR-RNNT), which encourages agreement across training modes. Experiments show that the proposed approach improves streaming accuracy at low latency while preserving offline performance and scaling to larger model sizes and training datasets. The proposed Unified ASR framework and the English model checkpoint are open-sourced.

Arabic maqam music microtonal, modal, and built on ornamented call and response is among the traditions most underserved by generative music models, whose training frameworks remain predominantly Western and equaltempered. Real time accompaniment sharpens this gap: an AI partner must listen, adapt dynamically, and respect idiomatic microtonal structures. Streaming text to music models provide strong generative capabilities but lack precise control interfaces. We present MazzikaAI, a knowledge based system that uses natural language as the actuator of a realtime control loop. By compiling live MIDI, gesture, and inferred harmony into continuously updated text prompts, MazzikaAI steers an unmodified streaming generator, Google Lyria RealTime, without requiring model finetuning. The system embeds expert knowledge of six core maqamat, characteristic ornaments, and ensemble dynamics, maintaining realtime responsiveness with subsecond keytoaudibleupdate latency. Empirical evaluations demonstrate that dynamic prompt compilation reliably grounds generation in microtonal scales, significantly increasing offgrid quartertone content over baseline generation. Beyond its core implementation, MazzikaAI illustrates how deterministic knowledgebased rules can effectively bridge expert, nonWestern musical traditions and unfinetuned foundation models. This architecture establishes a scalable paradigm for realtime humanAI cocreation, offering a generalizable blueprint for interactive accompaniment, adaptive music education, and culturally inclusive generative audio across diverse global idioms.

Full-duplex voice interaction allows users and agents to speak simultaneously with controllable barge-in, enabling lifelike assistants and customer service. Existing solutions are either end-to-end, difficult to design and hard to control, or modular pipelines governed by turn-taking controllers that ease upgrades and per-module optimization; however, prior modular frameworks depend on non-open components and external providers, limiting holistic optimization. In this work, we present a complete, practical full-duplex voice interaction system comprising a turn-taking controller, an interaction module, and a dialogue manager. The controller integrates streaming personalized VAD (pVAD) to suppress false barge-ins from noise and non-primary speakers, precisely timestamp primary-speaker segments, and explicitly enable primary-speaker barge-ins; a semantic end-of-turn detector improves stop decisions. It upgrades heterogeneous half-duplex pipelines, cascaded, semi-cascaded, and speech-to-speech, to full duplex. Using internal models, we implement cascaded and semi-cascaded variants; the semi-cascaded one captures emotional and paralinguistic cues, yields more coherent responses, lowers latency and error propagation, and improves robustness. A dialogue manager extends capabilities via tool invocation and context management. We also propose three system-level metrics, barge-in, end-of-turn detection accuracy, and end-to-end latency, to assess naturalness, control accuracy, and efficiency. Experiments show fewer false interruptions, more accurate semantic ends, and lower latency approaching industrial systems, enabling robust, natural, real-time full-duplex interaction. Demos: https://fireredteam.github.io/demos/firered_chat.

Scaling laws for Large Language Models (LLMs) establish that model quality improves with computational scale, yet edge deployment imposes strict constraints on compute, memory, and power. Since General Matrix Multiplication (GEMM) accounts for up to 90% of inference time, efficient GEMM acceleration is critical for edge AI. The Adaptive Intelligent Engines available in the AMD Versal adaptive SoCs are well suited for this task, but existing state-of-the-art (SOTA) frameworks maximize performance through spatial scaling, distributing workloads across hundreds of cores -- an approach that fails on resource-limited edge SoCs due to physical implementation failures, bandwidth saturation, and excessive resource consumption. We propose Tempus, a Resource-Invariant Temporal GEMM framework for the AMD Versal AI Edge SoC. Rather than expanding hardware resources with matrix size, Tempus employs a fixed compute block of 16 AIE-ML cores, achieving scalability through iterative graph execution and algorithmic data tiling and replication in the Programmable Logic. High-speed cascade streaming ensures low-latency partial sum reduction at Initiation Interval (II) of 1, while a deadlock-free DATAFLOW protocol maximizes transfer-compute overlap and PLIO reuse. Evaluated on GEMM workloads, Tempus achieves 607 GOPS at 10.677 W total on-chip power. By characterizing system-level efficiency through the Platform-Aware Utility (PAU) metric, we prove that Tempus achieves a 211.2x higher prominence factor than the leading spatial SOTA (ARIES). Furthermore, the framework maintains a 0.00% utilization of URAM/DSP, yielding 22.0x core frugality, 7.1x power frugality, and a 6.3x reduction in I/O demand, establishing a sustainable, scalable foundation for edge LLM inference.

Autoregressive video diffusion with causal diffusion transformers has emerged as a major paradigm for real-time streaming video generation and action-conditioned interactive world models. In this work, we extend rCM, an advanced diffusion distillation framework, to autoregressive video diffusion. The core philosophy of rCM lies in the complementarity between forward and reverse divergences, represented by consistency models (CMs) and distribution matching distillation (DMD), respectively, in diffusion distillation. This philosophy naturally carries over to the autoregressive setting, where teacher-forcing (TF) provides an offline, forward-divergence causal training paradigm, while self-forcing (SF) corresponds to an on-policy, reverse-divergence refinement. Our contributions are: (1) through extensive experiments, we show that teacher-forcing CM is currently the best complement to self-forcing DMD as an initialization strategy (2) we present the first implementation of teacher-forcing-based continuous-time CMs (e.g., sCM/MeanFlow) for autoregressive video diffusion, enabled by our custom-mask FlashAttention-2 JVP kernel, achieving 10times faster convergence compared to discrete-time CMs (dCMs) (3) we introduce Causal-rCM, a leading, unified, and scalable algorithm-infrastructure open recipe for diffusion distillation and causal training (4) we achieve state-of-the-art streaming video generation performance in both frame-wise and chunk-wise settings, using only synthetic data for training. Notably, our distilled 2-step causal Wan2.1-1.3B model achieves a VBench-T2V score of 84.63 with only 1 or 2 sampling steps. We further apply Causal-rCM to Cosmos 3, an advanced omnimodal world foundation model for physical AI with action-conditioned generation capability, enabling an interactive world model.

The AI trustworthiness crisis threatens to derail the artificial intelligence revolution, with regulatory barriers, security vulnerabilities, and accountability gaps preventing deployment in critical domains. Current AI systems operate on opaque data structures that lack the audit trails, provenance tracking, or explainability required by emerging regulations like the EU AI Act. We propose an artifact-centric AI agent paradigm where behavior is driven by persistent, verifiable data artifacts rather than ephemeral tasks, solving the trustworthiness problem at the data architecture level. Central to this approach is the Multimodal Artifact File Format (MAIF), an AI-native container embedding semantic representations, cryptographic provenance, and granular access controls. MAIF transforms data from passive storage into active trust enforcement, making every AI operation inherently auditable. Our production-ready implementation demonstrates ultra-high-speed streaming (2,720.7 MB/s), optimized video processing (1,342 MB/s), and enterprise-grade security. Novel algorithms for cross-modal attention, semantic compression, and cryptographic binding achieve up to 225 compression while maintaining semantic fidelity. Advanced security features include stream-level access control, real-time tamper detection, and behavioral anomaly analysis with minimal overhead. This approach directly addresses the regulatory, security, and accountability challenges preventing AI deployment in sensitive domains, offering a viable path toward trustworthy AI systems at scale.

When training neural rankers using Large Language Models, it's expected that a practitioner would make use of multiple GPUs to accelerate the training time. By using more devices, deep learning frameworks, like PyTorch, allow the user to drastically increase the available VRAM pool, making larger batches possible when training, therefore shrinking training time. At the same time, one of the most critical processes, that is generally overlooked when running data-hungry models, is how data is managed between disk, main memory and VRAM. Most open source research implementations overlook this memory hierarchy, and instead resort to loading all documents from disk to main memory and then allowing the framework (e.g., PyTorch) to handle moving data into VRAM. Therefore, with the increasing sizes of datasets dedicated to IR research, a natural question arises: s this the optimal solution for optimizing training time? We here study how three different popular approaches to handling documents for IR datasets behave and how they scale with multiple GPUs. Namely, loading documents directly into memory, reading documents directly from text files with a lookup table and using a library for handling IR datasets (ir_datasets) differ, both in performance (i.e. samples processed per second) and memory footprint. We show that, when using the most popular libraries for neural ranker research (i.e. PyTorch and Hugging Face's Transformers), the practice of loading all documents into main memory is not always the fastest option and is not feasible for setups with more than a couple GPUs. Meanwhile, a good implementation of data streaming from disk can be faster, while being considerably more scalable. We also show how popular techniques for improving loading times, like memory pining, multiple workers, and RAMDISK usage, can reduce the training time further with minor memory overhead.

Connectionist temporal classification (CTC) naturally supports offline and streaming speech recognition with utterance-level supervision, but conventional implementations materialize frame-by-vocabulary activations in memory, making CTC training with native LLM vocabularies prohibitively memory-intensive. A key observation is that every valid CTC alignment uses only target tokens and blank, and their union across a batch typically forms a small subset of the full vocabulary. We introduce Pruned CTC, which restricts alignment computation to this subset while retaining full-vocabulary normalization. We prove that this vocabulary reduction is exactly equivalent to full-vocabulary CTC in loss and gradients. Head-and-loss activation memory no longer scales linearly with vocabulary size. We further apply finite-beam alignment pruning. Building on Pruned CTC, we develop LLM-CTC, which adapts pretrained LLMs for non-autoregressive ASR while retaining causal attention and native vocabularies, and extend it to bounded-history streaming, avoiding chunk-level speech--text alignments. Experiments show that, with Zipformer-M encoder and 180K vocabulary, Pruned CTC reduces full-step memory by 5.1times with only 17% step-time overhead. Across three corpora, it matches standard CTC accuracy. On GigaSpeech, across six Qwen3 model sizes from 0.6B to 32B, LLM-CTC remains within 7% relative WER of LLM-CE with 7 to 10times faster recognition; when fine-tuning Qwen3-ASR for bounded-history streaming, LLM-CTC remains within 3% relative WER of matched offline models on the test set. Together, these results establish Pruned CTC as a scalable sequence objective for native-vocabulary LLM ASR across offline and streaming settings.

Whisper is one of the recent state-of-the-art multilingual speech recognition and translation models, however, it is not designed for real time transcription. In this paper, we build on top of Whisper and create Whisper-Streaming, an implementation of real-time speech transcription and translation of Whisper-like models. Whisper-Streaming uses local agreement policy with self-adaptive latency to enable streaming transcription. We show that Whisper-Streaming achieves high quality and 3.3 seconds latency on unsegmented long-form speech transcription test set, and we demonstrate its robustness and practical usability as a component in live transcription service at a multilingual conference.

We introduce a new class of algorithms, Stochastic Generalized Method of Moments (SGMM), for estimation and inference on (overidentified) moment restriction models. Our SGMM is a novel stochastic approximation alternative to the popular Hansen (1982) (offline) GMM, and offers fast and scalable implementation with the ability to handle streaming datasets in real time. We establish the almost sure convergence, and the (functional) central limit theorem for the inefficient online 2SLS and the efficient SGMM. Moreover, we propose online versions of the Durbin-Wu-Hausman and Sargan-Hansen tests that can be seamlessly integrated within the SGMM framework. Extensive Monte Carlo simulations show that as the sample size increases, the SGMM matches the standard (offline) GMM in terms of estimation accuracy and gains over computational efficiency, indicating its practical value for both large-scale and online datasets. We demonstrate the efficacy of our approach by a proof of concept using two well known empirical examples with large sample sizes.

This paper introduces StreamV2V, a diffusion model that achieves real-time streaming video-to-video (V2V) translation with user prompts. Unlike prior V2V methods using batches to process limited frames, we opt to process frames in a streaming fashion, to support unlimited frames. At the heart of StreamV2V lies a backward-looking principle that relates the present to the past. This is realized by maintaining a feature bank, which archives information from past frames. For incoming frames, StreamV2V extends self-attention to include banked keys and values and directly fuses similar past features into the output. The feature bank is continually updated by merging stored and new features, making it compact but informative. StreamV2V stands out for its adaptability and efficiency, seamlessly integrating with image diffusion models without fine-tuning. It can run 20 FPS on one A100 GPU, being 15x, 46x, 108x, and 158x faster than FlowVid, CoDeF, Rerender, and TokenFlow, respectively. Quantitative metrics and user studies confirm StreamV2V's exceptional ability to maintain temporal consistency.

Streaming videos is one of the methods for creators to share their creative works with their audience. In these videos, the streamer share how they achieve their final objective by using various tools in one or several programs for creative projects. To this end, the steps required to achieve the final goal can be discussed. As such, these videos could provide substantial educational content that can be used to learn how to employ the tools used by the streamer. However, one of the drawbacks is that the streamer might not provide enough details for every step. Therefore, for the learners, it might be difficult to catch up with all the steps. In order to alleviate this issue, one solution is to link the streaming videos with the relevant tutorial available for the tools used in the streaming video. More specifically, a system can analyze the content of the live streaming video and recommend the most relevant tutorials. Since the existing document recommendation models cannot handle this situation, in this work, we present a novel dataset and model for the task of tutorial recommendation for live-streamed videos. We conduct extensive analyses on the proposed dataset and models, revealing the challenging nature of this task.

Recent advancements in generative models are pushing video generation toward unbounded streaming audio-video generation for real-time interactive worlds. However, existing benchmarks primarily evaluate completed sequences and struggle to capture streaming properties. To bridge this gap, we introduce StreamAV-Bench, the first comprehensive benchmark tailored for streaming audio-video generation. StreamAV-Bench establishes a unified evaluation framework, including the progressive track for instruction adherence and long-horizon stability, and the interactive track for interactive response and state retention and reuse. With expert-verified evaluation cases across 32 fine-grained dimensions, we conduct an extensive evaluation of 13 representative systems. Our analysis reveals that current models suffer from temporal drift in progressive generation and responsiveness bottlenecks during interactive control. Based on a comprehensive failure analysis, we share insights to advance the development of native joint audio-video streaming models.

Vision-Language Models (VLMs) are increasingly required to process unbounded video streams in applications such as video-call assistants, live commentary, and embodied robots. An ideal streaming system should support proactive interaction, long-horizon memory, and real-time processing, while resting on a VLM backbone capable of handling diverse in-the-wild streaming tasks. However, existing VLMs excel at offline video understanding but fall short in streaming capabilities and lack dedicated infrastructure for streaming deployment. We address this gap on three fronts. (i) For backbone capability, we construct Streaming-Train-248K, a streaming dataset paired with a novel training objective for adapting VLMs to streaming interaction and understanding. (ii) For real-world deployment, we introduce Streaming Harness, a plug-and-play system that endows any VLM with three core abilities: proactive interaction (per-second response decisions), long-term memory (12-hour context retention), and real-time processing (sub-second latency). (iii) To drive continued community progress on streaming capabilities, we design Streaming-Eval, a benchmark that reflects models' capabilities across diverse in-the-wild scenarios. Extensive experiments demonstrate consistent gains from our approach across all core capabilities required for streaming video understanding. We will open-source our data, code, and benchmark to advance the community's shift from offline video understanding to deployable streaming intelligence.

Large Language Models have shown remarkable efficacy in generating streaming data such as text and audio, thanks to their temporally uni-directional attention mechanism, which models correlations between the current token and previous tokens. However, video streaming remains much less explored, despite a growing need for live video processing. State-of-the-art video diffusion models leverage bi-directional temporal attention to model the correlations between the current frame and all the surrounding (i.e. including future) frames, which hinders them from processing streaming videos. To address this problem, we present Live2Diff, the first attempt at designing a video diffusion model with uni-directional temporal attention, specifically targeting live streaming video translation. Compared to previous works, our approach ensures temporal consistency and smoothness by correlating the current frame with its predecessors and a few initial warmup frames, without any future frames. Additionally, we use a highly efficient denoising scheme featuring a KV-cache mechanism and pipelining, to facilitate streaming video translation at interactive framerates. Extensive experiments demonstrate the effectiveness of the proposed attention mechanism and pipeline, outperforming previous methods in terms of temporal smoothness and/or efficiency.

An ideal model for dense video captioning -- predicting captions localized temporally in a video -- should be able to handle long input videos, predict rich, detailed textual descriptions, and be able to produce outputs before processing the entire video. Current state-of-the-art models, however, process a fixed number of downsampled frames, and make a single full prediction after seeing the whole video. We propose a streaming dense video captioning model that consists of two novel components: First, we propose a new memory module, based on clustering incoming tokens, which can handle arbitrarily long videos as the memory is of a fixed size. Second, we develop a streaming decoding algorithm that enables our model to make predictions before the entire video has been processed. Our model achieves this streaming ability, and significantly improves the state-of-the-art on three dense video captioning benchmarks: ActivityNet, YouCook2 and ViTT. Our code is released at https://github.com/google-research/scenic.

Streaming Speech-to-Text Translation (StreamST) requires producing translations concurrently with incoming speech, imposing strict latency constraints and demanding models that balance partial-information decision-making with high translation quality. Research efforts on the topic have so far relied on the SimulEval repository, which is no longer maintained and does not support systems that revise their outputs. In addition, it has been designed for simulating the processing of short segments, rather than long-form audio streams, and it does not provide an easy method to showcase systems in a demo. As a solution, we introduce simulstream, the first open-source framework dedicated to unified evaluation and demonstration of StreamST systems. Designed for long-form speech processing, it supports not only incremental decoding approaches, but also re-translation methods, enabling for their comparison within the same framework both in terms of quality and latency. In addition, it also offers an interactive web interface to demo any system built within the tool.

Recently, great progress has been achieved in text-to-video (T2V) generation by scaling transformer-based diffusion models to billions of parameters, which can generate high-quality videos. However, existing models typically produce only short clips offline, restricting their use cases in interactive and real-time applications. This paper addresses these challenges by proposing StreamDiT, a streaming video generation model. StreamDiT training is based on flow matching by adding a moving buffer. We design mixed training with different partitioning schemes of buffered frames to boost both content consistency and visual quality. StreamDiT modeling is based on adaLN DiT with varying time embedding and window attention. To practice the proposed method, we train a StreamDiT model with 4B parameters. In addition, we propose a multistep distillation method tailored for StreamDiT. Sampling distillation is performed in each segment of a chosen partitioning scheme. After distillation, the total number of function evaluations (NFEs) is reduced to the number of chunks in a buffer. Finally, our distilled model reaches real-time performance at 16 FPS on one GPU, which can generate video streams at 512p resolution. We evaluate our method through both quantitative metrics and human evaluation. Our model enables real-time applications, e.g. streaming generation, interactive generation, and video-to-video. We provide video results and more examples in our project website: <a href="https://cumulo-autumn.github.io/StreamDiT/">this https URL.</a>

Streaming video editing has made rapid progress, yet practical deployment is still limited by two core issues: maintaining stable backgrounds and non-edited regions over time, and achieving the low latency required for real-time interactive scenarios. Meanwhile, recent streaming video generation methods are mostly developed for synthesis and cannot be directly applied to editing due to the strict preservation requirement and region-specific control. In this work, we present a novel streaming video editing framework that performs causal, frame-by-frame editing with strong content preservation and real-time responsiveness. Our key design is a three-stage distillation pipeline that progressively transfers editing capability from a powerful bidirectional foundation model to an efficient unidirectional streaming editor, enabling stable long-horizon edits without sacrificing visual fidelity. To further support real-time deployment, we introduce an AR-oriented mask cache that reuses region-related computation across frames, substantially reducing redundant processing and accelerating inference. Finally, we establish a dedicated benchmark for streaming video editing. Extensive evaluations demonstrate that our method achieves state-of-the-art visual quality among streaming baselines while drastically boosting inference speed to 12.66 FPS, making it suitable for interactive and augmented reality applications.

Generative models are reshaping the live-streaming industry by redefining how content is created, styled, and delivered. Previous image-based streaming diffusion models have powered efficient and creative live streaming products but have hit limits on temporal consistency due to the foundation of image-based designs. Recent advances in video diffusion have markedly improved temporal consistency and sampling efficiency for offline generation. However, offline generation systems primarily optimize throughput by batching large workloads. In contrast, live online streaming operates under strict service-level objectives (SLOs): time-to-first-frame must be minimal, and every frame must meet a per-frame deadline with low jitter. Besides, scalable multi-GPU serving for real-time streams remains largely unresolved so far. To address this, we present StreamDiffusionV2, a training-free pipeline for interactive live streaming with video diffusion models. StreamDiffusionV2 integrates an SLO-aware batching scheduler and a block scheduler, together with a sink-token--guided rolling KV cache, a motion-aware noise controller, and other system-level optimizations. Moreover, we introduce a scalable pipeline orchestration that parallelizes the diffusion process across denoising steps and network layers, achieving near-linear FPS scaling without violating latency guarantees. The system scales seamlessly across heterogeneous GPU environments and supports flexible denoising steps (e.g., 1--4), enabling both ultra-low-latency and higher-quality modes. Without TensorRT or quantization, StreamDiffusionV2 renders the first frame within 0.5s and attains 58.28 FPS with a 14B-parameter model and 64.52 FPS with a 1.3B-parameter model on four H100 GPUs, making state-of-the-art generative live streaming practical and accessible--from individual creators to enterprise-scale platforms.

Multimodal large language models (MLLMs) have shown strong performance on offline video understanding, but most are limited to offline inference or have weak online reasoning, making multi-turn interaction over continuously arriving video streams difficult. Existing streaming methods typically use an interleaved perception-generation paradigm, which prevents concurrent perception and generation and leads to early memory decay as streams grow, hurting long-range dependency modeling. We propose Think While Watching, a memory-anchored streaming video reasoning framework that preserves continuous segment-level memory during multi-turn interaction. We build a three-stage, multi-round chain-of-thought dataset and adopt a stage-matched training strategy, while enforcing strict causality through a segment-level streaming causal mask and streaming positional encoding. During inference, we introduce an efficient pipeline that overlaps watching and thinking and adaptively selects the best attention backend. Under both single-round and multi-round streaming input protocols, our method achieves strong results. Built on Qwen3-VL, it improves single-round accuracy by 2.6% on StreamingBench and by 3.79% on OVO-Bench. In the multi-round setting, it maintains performance while reducing output tokens by 56%. Code is available at: https://github.com/wl666hhh/Think_While_Watching/

Streaming video understanding is a critical capability for real-world applications, including embodied intelligence, autonomous driving, industrial monitoring, surveillance and early warning, and wearable assistants. However, processing continuous video streams with multimodal large language models (MLLMs) is computationally expensive. Existing efforts have explored reducing streaming overhead through visual token pruning, token merging, quantization, on-demand frame retrieval, and context offloading. However, most existing methods overlook the dimension of model depth. Repeatedly executing full-depth MLLM prefill over incoming frames is prohibitively expensive, incurring substantial computational overhead and causing the KV cache to grow at a rate directly proportional to the prefill depth. To address these challenges, we propose ShallowStream, a novel framework that leverages the shallow layers of an MLLM to simultaneously perform frame encoding and retrieval index building. During stream processing, ShallowStream maintains an always-on lightweight index using the KV cache of shallow layers. During query-time answering, we leverage the attention scores generated by the shallow layers to score context frames and employ a diversity-aware selection strategy to retrieve precise and comprehensive evidence. ShallowStream achieves performance on par with the strongest existing streaming methods, while reducing per-frame prefill latency and 10-second end-to-end latency by up to 52.1x and 11.9x, respectively. Our code is available at https://github.com/CURRENTF/ShallowStream.

Large language models (LLMs) have demonstrated remarkable capabilities in chain of thought (CoT) reasoning. However, the current LLM reasoning paradigm initiates thinking only after the entire input is available, which introduces unnecessary latency and weakens attention to earlier information in dynamic scenarios. Inspired by human cognition of thinking while reading, we first design a \textbf{streaming thinking} paradigm for LLMs, where reasoning unfolds in the order of input and further adjusts its depth once reading is complete. We instantiate this paradigm with StreamingThinker, a framework that enables LLMs to think while reading through the integration of streaming CoT generation, streaming-constraint training, and streaming parallel inference. Specifically, StreamingThinker employs streaming reasoning units with quality control for CoT generation, enforces order-preserving reasoning through streaming attention masks and position encoding, and leverages parallel KV caches that decouple input encoding from reasoning generation, thereby ensuring alignment and enabling true concurrency. We evaluate StreamingThinker on the Qwen3 model family across math reasoning, logical reasoning, and context-based QA reasoning tasks. Experimental results show that the StreamingThinker preserves performance comparable to batch thinking, while yielding an 80\% reduction in token waiting before the onset of reasoning and a more than 60\% reduction in time-level latency for producing the final answer, demonstrating the effectiveness of the streaming paradigm for LLM reasoning. Code is publicly available at https://github.com/EIT-NLP/StreamingLLM/tree/main/StreamingThinker.

Streaming video generation is emerging as a new serving workload in which users interact with long-lived sessions that generate video progressively, chunk by chunk. Unlike offline video generation or typical LLM serving, streaming video generation must preserve session state across active and idle periods, repeatedly schedule ongoing sessions, and deliver each chunk under a tight latency target. This creates two key serving challenges in multi-user, multi-GPU environments: session duration heterogeneity, where long-running sessions make placement decisions suboptimal over time, and temporal user-demand heterogeneity, where the number of active sessions fluctuates sharply across bursts and idle periods. We present TurboServe, the first serving system designed specifically for streaming video generation workloads. TurboServe formulates serving as an online scheduling problem that jointly coordinates session placement and GPU provisioning. Its closed-loop scheduling algorithm combines a migration-aware placement controller, which rebalances sessions across GPUs to reduce the maximum per-chunk latency, with a load-driven autoscaling controller, which adapts the GPU budget to workload variation for improved cost efficiency. To support these decisions at runtime, TurboServe implements coalesced chunk processing for batching concurrent active sessions on the same GPU, GPU-CPU offloading for session suspension and resumption, and NCCL-based GPU-GPU migration for online rebalancing. We evaluate TurboServe on real-world production traces from Shengshu Technology across multiple model sizes and GPU clusters with up to 64 NVIDIA B300 GPUs. Compared with baseline serving configurations, TurboServe reduces worst-case per-chunk latency by 37.5% and total GPU operating cost by 37.2% on average. Our code is publicly available at https://github.com/shengshu-ai/TurboServe.

Real-time streaming video-to-video editing (V2V) is critical for interactive applications such as live broadcasting and gaming, yet it remains a formidable challenge due to the stringent requirements for temporal consistency and inference throughput. In this paper, we present SANA-Streaming, a system-algorithm co-designed framework for high-resolution, real-time streaming video editing on consumer GPUs, with the following three core designs: (1) Hybrid Diffusion Transformer architecture introduces softmax attention in part of the blocks to improve local modeling capabilities while preserving the efficiency of linear layers. (2) Cycle-Reverse Regularization is a novel training strategy that enforces semantic consistency by predicting source frames from generated content via flow matching, improving temporal consistency without requiring paired long edited videos. (3) Efficient System Co-design combines fused GDN kernels and Mixed-Precision Quantization (MPQ) optimized for the NVIDIA Blackwell (RTX 5090) architecture. By profiling real-world throughput, our MPQ maximizes Tensor Core utilization while maintaining generation quality. The resulting system achieves real-time 1280 x 704 resolution editing at 24 end-to-end FPS on a single RTX 5090 GPU, with the DiT core running at 58 FPS. Experimental results demonstrate that our co-design approach significantly outperforms existing SOTA methods in both temporal coherence and system throughput.

We present Wan-Streamer, a native-streaming, end-to-end interactive foundation model designed from the ground up for real-time, low-latency, full-duplex audio-visual interaction. Wan-Streamer seamlessly models language, audio, and video as both input and output within a single Transformer, where the sequence is represented as interleaved visual, audio, and text input tokens together with visual, audio, and text output tokens, coordinated by block-causal attention for incremental streaming. Unlike cascaded interactive systems that rely on separate VAD, ASR, language, TTS, audio-driven animation, or video-generation modules, Wan-Streamer does not rely on external language, speech, avatar, or video-generation modules: perception, reasoning, generation, response timing, turn management, and cross-modal synchronization are learned jointly within one unified model, reducing pipeline latency and error accumulation. To support natural audio-visual responsiveness, we redesign the entire stack around streamability, including causal encoders, causal decoders, block-causal attention, and low-latency multimodal token scheduling, enabling streaming units as short as 160 ms at 25 fps. Wan-Streamer achieves approximately 200 ms model-side response latency and approximately 550 ms total interaction latency when combined with 350 ms bidirectional network latency, supporting sub-second duplex audio-visual communication. These results position Wan-Streamer as a unified, end-to-end, multimodal interactive foundation model for low-latency streaming interaction.

Existing streaming vision-language models (VLMs) continuously perceive and reason over visual streams, but their computational pathways remain fixed throughout inference. Consequently, they cannot adapt computation to evolving scene dynamics, where different future events demand different levels and forms of perception. We show that streaming VLMs inherently possess the ability to anticipate the immediate future, and leverage this capability to dynamically configure future computation in a training-free manner. Realizing such anticipatory computation, however, is very challenging: future anticipation must be sufficiently reliable to guide computation, planning must run concurrently with streaming inference, and online reconfiguration must incur negligible overhead. To address these challenges, we introduce FORESIGHT, a dual-stream architecture comprising two Siamese LLMs with shared weights, input encoders, and KV cache. The first LLM continuously processes incoming tokens, while the second runs ahead of the stream to anticipate future context, plan future computation, and generate task responses without interrupting streaming inference. Each plan decides when to reason next, what to check then, and how densely to sample, keeping transient evidence separate from persistent control. The resulting computation plan is executed online through an efficient reconfiguration protocol with schemaguided decoding and lightweight diff-based updates, enabling dynamic adaptation with low overhead. With a frozen Qwen3-VL-8B backbone, FORESIGHT achieves 23.0 mean joint F1 on OmniPro Online evaluation beating strongest trained baseline by 9.5%, while improving the backbone by 6.7 on StreamingBench and 15.4 on OVO-Bench, with the largest gain of 18.7 when evidence arrives later in the video stream. Our source code will be made publicly available.

Current motion-conditioned video generation methods suffer from prohibitive latency (minutes per video) and non-causal processing that prevents real-time interaction. We present MotionStream, enabling sub-second latency with up to 29 FPS streaming generation on a single GPU. Our approach begins by augmenting a text-to-video model with motion control, which generates high-quality videos that adhere to the global text prompt and local motion guidance, but does not perform inference on the fly. As such, we distill this bidirectional teacher into a causal student through Self Forcing with Distribution Matching Distillation, enabling real-time streaming inference. Several key challenges arise when generating videos of long, potentially infinite time-horizons: (1) bridging the domain gap from training on finite length and extrapolating to infinite horizons, (2) sustaining high quality by preventing error accumulation, and (3) maintaining fast inference, without incurring growth in computational cost due to increasing context windows. A key to our approach is introducing carefully designed sliding-window causal attention, combined with attention sinks. By incorporating self-rollout with attention sinks and KV cache rolling during training, we properly simulate inference-time extrapolations with a fixed context window, enabling constant-speed generation of arbitrarily long videos. Our models achieve state-of-the-art results in motion following and video quality while being two orders of magnitude faster, uniquely enabling infinite-length streaming. With MotionStream, users can paint trajectories, control cameras, or transfer motion, and see results unfold in real-time, delivering a truly interactive experience.

Context retrieval systems for LLM inference face a critical challenge: high retrieval latency creates a fundamental tension between waiting for complete context (poor time-to-first-token) and proceeding without it (reduced quality). Streaming context incrementally--overlapping retrieval with inference--can mitigate this latency, but doing so with concurrent requests introduces new challenges: requests contend for GPU compute and memory, and scheduling must adapt to dynamic context arrivals. We present Stream2LLM, a streaming-aware LLM serving system for concurrent prefill-decode disaggregated deployments. Stream2LLM introduces adaptive scheduling and preemption for two distinct retrieval patterns: append-mode (progressive context accumulation) and update-mode (iterative refinement with cache invalidation). It decouples scheduling decisions from resource acquisition, enabling flexible preemption strategies guided by hardware-specific cost models, and uses longest common prefix matching to minimize redundant computation when input changes dynamically. To evaluate Stream2LLM, we collect two large-scale, real-world streaming workloads based on web crawling and approximate nearest neighbor search. Our evaluation demonstrates that streaming architecture delivers up to 11x TTFT improvements, with cost-aware scheduling providing critical benefits under memory pressure, all while maintaining throughput parity with non-streaming baselines. Code: https://github.com/rajveerb/stream2llm/tree/mlsys_artifact

We propose DeltaStreamer, a novel agentic framework for streaming video understanding inspired by how humans observe, remember, and investigate. Streaming video understanding requires a system to retain evidence before knowing which details future queries will need. Existing approaches often obscure event transitions and omit relevant details when compressing video history, and cannot recover missing visual evidence. DeltaStreamer addresses these limitations by combining change-aware memory with query-driven planning and targeted evidence gathering with replay. Before a query arrives, it continuously observes the stream and explicitly records visual changes in structured memory, preserving how events unfold rather than only what is present. When a query arrives, a query-driven planner identifies the required evidence and guides memory retrieval and targeted replay. By revisiting historical frames, the agent can recover visual details omitted during observation and ground its answer in evidence beyond the retained descriptions. This connects continuous observation with active investigation tailored to each question. Experiments on OVO-Bench and StreamingBench demonstrate improvements over representative streaming video understanding methods, with overall scores of 66.07% and 59.53%, respectively. Project page: https://bbbbchan.github.io/DeltaStreamer/

Existing zero-shot text-to-speech (TTS) systems are typically designed to process complete sentences and are constrained by the maximum duration for which they have been trained. However, in many streaming applications, texts arrive continuously in short chunks, necessitating instant responses from the system. We identify the essential capabilities required for chunk-level streaming and introduce LiveSpeech 2, a stream-aware model that supports infinitely long speech generation, text-audio stream synchronization, and seamless transitions between short speech chunks. To achieve these, we propose (1) adopting Mamba, a class of sequence modeling distinguished by linear-time decoding, which is augmented by cross-attention mechanisms for conditioning, (2) utilizing rotary positional embeddings in the computation of cross-attention, enabling the model to process an infinite text stream by sliding a window, and (3) decoding with semantic guidance, a technique that aligns speech with the transcript during inference with minimal overhead. Experimental results demonstrate that our models are competitive with state-of-the-art language model-based zero-shot TTS models, while also providing flexibility to support a wide range of streaming scenarios.

Large Language Models (LLMs) are primarily designed for batch processing. Existing methods for adapting LLMs to streaming rely either on expensive re-encoding or specialized architectures with limited scalability. This work identifies three key mismatches in adapting batch-oriented LLMs to streaming: (1) input-attention, (2) output-attention, and (3) position-ID mismatches. While it is commonly assumed that the latter two mismatches require frequent re-encoding, our analysis reveals that only the input-attention mismatch significantly impacts performance, indicating re-encoding outputs is largely unnecessary. To better understand this discrepancy with the common assumption, we provide the first comprehensive analysis of the impact of position encoding on LLMs in streaming, showing that preserving relative positions within source and target contexts is more critical than maintaining absolute order. Motivated by the above analysis, we introduce a group position encoding paradigm built on batch architectures to enhance consistency between streaming and batch modes. Extensive experiments on cross-lingual and cross-modal tasks demonstrate that our method outperforms existing approaches. Our method requires no architectural modifications, exhibits strong generalization in both streaming and batch modes. The code is available at repository https://github.com/EIT-NLP/StreamingLLM.

We present Wan-Streamer v0.3, which reframes our native-streaming interaction model under a single organizing view: a video is a world plus an event stream. The world is the persistent context in which a video unfolds, including the environment, scene, subjects, ambient acoustic conditions, voice characteristics, and other relatively stable conditions. The event stream is everything that changes over time within that world, including scene or environmental changes, subject behavior, speech, and other sounds. This yields a general-purpose pretraining task over large amounts of real video: given a world and incoming input, predict how the world moves, changes, and responds in real time. The resulting competence can be specialized to a broad family of real-time downstream tasks. We instantiate it on real-time full-duplex audio-visual interaction, where the event stream is the agent's speech together with free-form behavior. Functionally, the model's multimodal understanding process is vision-language-action-like: it maps multimodal user input to language-form speech and behavior actions. Wan-Streamer v0.3 preserves the v0.2 operating point: 640x368 video at 25 FPS, a 160 ms streaming unit, approximately 200 ms model-side response latency, and approximately 550 ms total interaction latency under a 350 ms bidirectional network budget.

Interactive video generation commonly relies on small bidirectional chunks to reduce response latency. Yet our preliminary experiments show that larger chunks improve video quality and better utilize GPU parallelism, allowing more latents to be sampled with only a modest increase in sampling time. Motivated by these observations, we propose Speculative Sampling, a strategy that combines the modeling power of large bidirectional windows with the low-latency interaction of small ones. It expands the modeling window by appending noise latents as padding and caches the resulting predictions for reuse when the condition remains unchanged. Predictions are delivered incrementally, while the uncommitted future remains replaceable. Our latency analysis shows that this removes the waiting-time lower bound imposed by chunk boundaries, shifting the optimization focus from reducing chunk size to accelerating per-chunk sampling. Bidirectional window size thus becomes a decision variable for jointly optimizing visual quality and sampling time, rather than a necessary constraint on low-latency interaction. This opens a path to serving large bidirectional models in interactive streaming systems without complex streaming post-training.

We present a novel task called online video editing, which is designed to edit streaming frames while maintaining temporal consistency. Unlike existing offline video editing assuming all frames are pre-established and accessible, online video editing is tailored to real-life applications such as live streaming and online chat, requiring (1) fast continual step inference, (2) long-term temporal modeling, and (3) zero-shot video editing capability. To solve these issues, we propose Streaming Video Diffusion (SVDiff), which incorporates the compact spatial-aware temporal recurrence into off-the-shelf Stable Diffusion and is trained with the segment-level scheme on large-scale long videos. This simple yet effective setup allows us to obtain a single model that is capable of executing a broad range of videos and editing each streaming frame with temporal coherence. Our experiments indicate that our model can edit long, high-quality videos with remarkable results, achieving a real-time inference speed of 15.2 FPS at a resolution of 512x512.

Speculative decoding is a prominent technique to speed up the inference of a large target language model based on predictions of an auxiliary draft model. While effective, in application-specific settings, it often involves fine-tuning both draft and target models to achieve high acceptance rates. As the number of downstream tasks grows, these draft models add significant complexity to inference systems. We propose Speculative Streaming, a single-model speculative decoding method that fuses drafting into the target model by changing the fine-tuning objective from next token prediction to future n-gram prediction. Speculative Streaming speeds up decoding by 1.8 - 3.1X in a diverse set of tasks, such as Summarization, Structured Queries, and Meaning Representation, without sacrificing generation quality. Additionally, Speculative Streaming is parameter-efficient. It achieves on-par/higher speed-ups than Medusa-style architectures while using ~10000X fewer extra parameters, making it well-suited for resource-constrained devices.

Unlike offline processing, streaming video vision-language models face two fundamental constraints: causality and accumulation. Causality prevents access to future frames that offline methods exploit, while accumulation causes tokens to grow unbounded, creating efficiency bottlenecks. However, existing approaches only regulate post-LLM kv-cache, leaving costly pre-LLM prefill unchanged. We introduce StreamingTOM, a training-free, plug-and-play two-stage framework that addresses both pre-LLM and post-LLM bottlenecks. Causal Temporal Reduction imposes a fixed per-frame budget and selects tokens based on adjacent-frame changes and token saliency, drastically reducing per-frame prefill cost by processing only a compact subset of visual tokens, ensuring predictable latency. Online Quantized Memory stores tokens in 4-bit format, retrieves relevant groups on demand, and dequantizes them, keeping the active kv-cache bounded regardless of stream length. Experiments demonstrate our method achieves 15.7times kv-cache compression ratio; compared to prior SOTA (LiveVLM), it delivers 1.2times lower peak memory and 2times faster TTFT. StreamingTOM achieves state-of-the-art accuracy among training-free methods with an average of 63.8% on offline benchmarks and 55.8% accuracy and 3.7 score on RVS. These results demonstrate that real-time streaming video understanding with bounded active memory is achievable without model retraining.

Text-to-video diffusion models enable the generation of high-quality videos that follow text instructions, making it easy to create diverse and individual content. However, existing approaches mostly focus on high-quality short video generation (typically 16 or 24 frames), ending up with hard-cuts when naively extended to the case of long video synthesis. To overcome these limitations, we introduce StreamingT2V, an autoregressive approach for long video generation of 80, 240, 600, 1200 or more frames with smooth transitions. The key components are:(i) a short-term memory block called conditional attention module (CAM), which conditions the current generation on the features extracted from the previous chunk via an attentional mechanism, leading to consistent chunk transitions, (ii) a long-term memory block called appearance preservation module, which extracts high-level scene and object features from the first video chunk to prevent the model from forgetting the initial scene, and (iii) a randomized blending approach that enables to apply a video enhancer autoregressively for infinitely long videos without inconsistencies between chunks. Experiments show that StreamingT2V generates high motion amount. In contrast, all competing image-to-video methods are prone to video stagnation when applied naively in an autoregressive manner. Thus, we propose with StreamingT2V a high-quality seamless text-to-long video generator that outperforms competitors with consistency and motion. Our code will be available at: https://github.com/Picsart-AI-Research/StreamingT2V

Streaming video-to-audio (V2A) generation is essential for immersive interactive applications. However, real-time constraints leave existing streaming V2A methods far behind offline models: (1) visual frontends shrink their receptive fields to cut look-ahead latency, severely degrading audio-visual alignment; (2) causal autoregressive diffusion backends denoise each audio patch in isolation, impairing audio quality. To this end, we present LiveFoley, a streaming causal autoregressive diffusion architecture that addresses both bottlenecks with imperceptible latency. For the visual frontend, we introduce a Trailing Sliding Window that converts non-causal segment-level encoders into streaming modules without retraining. By simply realigning the window, it preserves precise audio-visual alignment, while a configurable hop size reduces the frontend look-ahead well below the human perceptual threshold. Building on this tunable hop size, we propose the Unified Varhop Framework to accommodate scenarios with diverse latency and computation budgets. For the audio backend, we explore widening the denoising window of the local diffusion transformer (LocDiT) head in two temporal directions. History LocDiT adds past context to improve quality at no latency cost and serves as our default. Alternatively, Future-Warmup LocDiT breaks the autoregressive deadlock with an approximate future condition, further improving generation quality at the cost of an acceptable backend look-ahead. Extensive experiments demonstrate that LiveFoley matches offline models in temporal alignment and leads streaming systems in generation quality. Project page: https://dalision.github.io/livefoley-page/

Vision-language models (VLMs) could power real-time assistants and autonomous agents, but they face a critical challenge: understanding near-infinite video streams without escalating latency and memory usage. Processing entire videos with full attention leads to quadratic computational costs and poor performance on long videos. Meanwhile, simple sliding window methods are also flawed, as they either break coherence or suffer from high latency due to redundant recomputation. In this paper, we introduce StreamingVLM, a model designed for real-time, stable understanding of infinite visual input. Our approach is a unified framework that aligns training with streaming inference. During inference, we maintain a compact KV cache by reusing states of attention sinks, a short window of recent vision tokens, and a long window of recent text tokens. This streaming ability is instilled via a simple supervised fine-tuning (SFT) strategy that applies full attention on short, overlapped video chunks, which effectively mimics the inference-time attention pattern without training on prohibitively long contexts. For evaluation, we build Inf-Streams-Eval, a new benchmark with videos averaging over two hours that requires dense, per-second alignment between frames and text. On Inf-Streams-Eval, StreamingVLM achieves a 66.18% win rate against GPT-4O mini and maintains stable, real-time performance at up to 8 FPS on a single NVIDIA H100. Notably, our SFT strategy also enhances general VQA abilities without any VQA-specific fine-tuning, improving performance on LongVideoBench by +4.30 and OVOBench Realtime by +5.96. Code is available at https://github.com/mit-han-lab/streaming-vlm.

We introduce StreamDiffusion, a real-time diffusion pipeline designed for interactive image generation. Existing diffusion models are adept at creating images from text or image prompts, yet they often fall short in real-time interaction. This limitation becomes particularly evident in scenarios involving continuous input, such as Metaverse, live video streaming, and broadcasting, where high throughput is imperative. To address this, we present a novel approach that transforms the original sequential denoising into the batching denoising process. Stream Batch eliminates the conventional wait-and-interact approach and enables fluid and high throughput streams. To handle the frequency disparity between data input and model throughput, we design a novel input-output queue for parallelizing the streaming process. Moreover, the existing diffusion pipeline uses classifier-free guidance(CFG), which requires additional U-Net computation. To mitigate the redundant computations, we propose a novel residual classifier-free guidance (RCFG) algorithm that reduces the number of negative conditional denoising steps to only one or even zero. Besides, we introduce a stochastic similarity filter(SSF) to optimize power consumption. Our Stream Batch achieves around 1.5x speedup compared to the sequential denoising method at different denoising levels. The proposed RCFG leads to speeds up to 2.05x higher than the conventional CFG. Combining the proposed strategies and existing mature acceleration tools makes the image-to-image generation achieve up-to 91.07fps on one RTX4090, improving the throughputs of AutoPipline developed by Diffusers over 59.56x. Furthermore, our proposed StreamDiffusion also significantly reduces the energy consumption by 2.39x on one RTX3060 and 1.99x on one RTX4090, respectively.

Understanding continuous video streams plays a fundamental role in real-time applications including embodied AI and autonomous driving. Unlike offline video understanding, streaming video understanding requires the ability to process video streams frame by frame, preserve historical information, and make low-latency decisions. To address these challenges, our main contributions are three-fold. (i) We develop a novel streaming video backbone, termed as StreamFormer, by incorporating causal temporal attention into a pre-trained vision transformer. This enables efficient streaming video processing while maintaining image representation capability. (ii) To train StreamFormer, we propose to unify diverse spatial-temporal video understanding tasks within a multitask visual-language alignment framework. Hence, StreamFormer learns global semantics, temporal dynamics, and fine-grained spatial relationships simultaneously. (iii) We conduct extensive experiments on online action detection, online video instance segmentation, and video question answering. StreamFormer achieves competitive results while maintaining efficiency, demonstrating its potential for real-time applications.

Real-time streaming joint audio-video generation for character animation requires a generator to speak the requested transcript, maintain visual identity across chunks, and run within a strict playback budget. These requirements are difficult to satisfy simultaneously: chunk-wise autoregressive generation can accumulate transcript-audio misalignment and visual drift, while the few-step distillation needed for low latency often degrades spatial diversity and temporal quality. We present StreamChar, a streaming framework that separates long-horizon orchestration from short-window audio-video denoising. An LLM-based orchestrator uses the transcript and historical context to produce frame-aligned audio conditions, and a joint audio-video DiT performs local bidirectional denoising with reference and motion-frame conditioning. For efficient deployment, we use a two-stage distillation pipeline that first compresses the sampler and then fine-tunes the student under online chunk rollouts. A progress-aware pointer aligns partial transcripts with generated audio during rollout training, and a sink-chunk memory provides a persistent visual anchor for reducing long-horizon drift. Experiments on short-clip and long-horizon protocols show that StreamChar runs in real time on a single H100 GPU and provides a favorable system-level trade-off among transcript fidelity, audio-visual synchronization, visual quality, and streaming stability compared with recent joint and audio-driven baselines.

In this work we explore the latency and accuracy of keyword spotting (KWS) models in streaming and non-streaming modes on mobile phones. NN model conversion from non-streaming mode (model receives the whole input sequence and then returns the classification result) to streaming mode (model receives portion of the input sequence and classifies it incrementally) may require manual model rewriting. We address this by designing a Tensorflow/Keras based library which allows automatic conversion of non-streaming models to streaming ones with minimum effort. With this library we benchmark multiple KWS models in both streaming and non-streaming modes on mobile phones and demonstrate different tradeoffs between latency and accuracy. We also explore novel KWS models with multi-head attention which reduce the classification error over the state-of-art by 10% on Google speech commands data sets V2. The streaming library with all experiments is open-sourced.

Recent Large Language Models have been enhanced with vision capabilities, enabling them to comprehend images, videos, and interleaved vision-language content. However, the learning methods of these large multimodal models typically treat videos as predetermined clips, making them less effective and efficient at handling streaming video inputs. In this paper, we propose a novel Learning-In-Video-Stream (LIVE) framework, which enables temporally aligned, long-context, and real-time conversation within a continuous video stream. Our LIVE framework comprises comprehensive approaches to achieve video streaming dialogue, encompassing: (1) a training objective designed to perform language modeling for continuous streaming inputs, (2) a data generation scheme that converts offline temporal annotations into a streaming dialogue format, and (3) an optimized inference pipeline to speed up the model responses in real-world video streams. With our LIVE framework, we built VideoLLM-online model upon Llama-2/Llama-3 and demonstrate its significant advantages in processing streaming videos. For instance, on average, our model can support streaming dialogue in a 5-minute video clip at over 10 FPS on an A100 GPU. Moreover, it also showcases state-of-the-art performance on public offline video benchmarks, such as recognition, captioning, and forecasting. The code, model, data, and demo have been made available at https://showlab.github.io/videollm-online.

Recent feed-forward reconstruction models like VGGT and π^3 achieve impressive reconstruction quality but cannot process streaming videos due to quadratic memory complexity, limiting their practical deployment. While existing streaming methods address this through learned memory mechanisms or causal attention, they require extensive retraining and may not fully leverage the strong geometric priors of state-of-the-art offline models. We propose LASER, a training-free framework that converts an offline reconstruction model into a streaming system by aligning predictions across consecutive temporal windows. We observe that simple similarity transformation (Sim(3)) alignment fails due to layer depth misalignment: monocular scale ambiguity causes relative depth scales of different scene layers to vary inconsistently between windows. To address this, we introduce layer-wise scale alignment, which segments depth predictions into discrete layers, computes per-layer scale factors, and propagates them across both adjacent windows and timestamps. Extensive experiments show that LASER achieves state-of-the-art performance on camera pose estimation and point map reconstruction %quality with offline models while operating at 14 FPS with 6 GB peak memory on a RTX A6000 GPU, enabling practical deployment for kilometer-scale streaming videos. Project website: https://neu-vi.github.io/LASER/{https://neu-vi.github.io/LASER/}

Mixture-of-experts models make nearly trillion-parameter capacity accessible with sparse per-token computation, provided that the serving system can distribute the weights and coordinate their execution. We present Cascadia's resident execution of Inkling, a 975B-total/41B-active-parameter model, on eleven Intel Core Ultra X7 358H AI PCs, each with 64 GB of memory, Arc B390 integrated graphics and gigabit Ethernet. We contribute a custom resident MoE engine that preserves Inkling's routing rules, constructs compressed graphs for OpenVINO's fused iGPU primitives, and coordinates FP16 expert computation with FP32 output restoration. The engine fits six consecutive decoder layers per machine and represents dense feed-forward blocks as all-active expert slices, reducing measured dense-layer call time from approximately 8.1 to 4.5 ms. A streaming pipeline coordinates concurrent generation, while captured-state draft evaluation measures agreement with the deployed numerical path. Paired measurements at fifteen concurrency levels from 1 to 176 streams reach 60.29 aggregate decode tokens/s at 88 streams, with 46.87 tokens/s over the complete serving phases. At fifteen streams, median first-token latency is 6.05 s. Raising the context budget from the 1,024-position default, real prompts of 1k to 64k tokens recover the embedded code in all 19 measured answers, with first-token time growing as aN+bN^2 and decode latency growing approximately linearly, both bounded by a single-threaded CPU attention loop rather than by memory, which holds 512k positions per stream. Evaluation on captured fleet states separates the effects of vocabulary selection and weight quantization on draft agreement. Together, these contributions establish an execution and evaluation approach for large sparse models on distributed client systems with shared CPU-GPU memory.

Streaming video understanding requires processing unbounded video streams with limited memory and computation, posing two key challenges. First, continuously constructing new and evicting old key-value(KV) caches is required for unbounded streams. Secondly, due to the high cost of collecting and training on unbounded streams, models must learn from short sequences while generalizing to long streams. Existing streaming VideoVLLMs fail to scale to unbounded video streams or focus on cache reuse strategies, leaving the impact of cache construction underexplored. In this paper, we propose Decoupled Streaming Cache(DSCache), a training-free cache construction mechanism that adapts pretrained offline models to streaming settings. DSCache maintains a cumulative past KV cache while constructing a separate instant cache on-demand, decoupled from past caches to preserve the informativeness of recent inputs. To enable position extrapolation beyond the training length, DSCache further incorporates a position-agnostic encoding strategy, ensuring KV caches to support unseen positions and preventing position overflow. Experiments on Streaming Video QA benchmarks demonstrate DSCache's state-of-the-art performance, with an average 2.5% accuracy gains over prior methods.

The grand vision of enabling persistent, large-scale 3D visual geometry understanding is shackled by the irreconcilable demands of scalability and long-term stability. While offline models like VGGT achieve inspiring geometry capability, their batch-based nature renders them irrelevant for live systems. Streaming architectures, though the intended solution for live operation, have proven inadequate. Existing methods either fail to support truly infinite-horizon inputs or suffer from catastrophic drift over long sequences. We shatter this long-standing dilemma with InfiniteVGGT, a causal visual geometry transformer that operationalizes the concept of a rolling memory through a bounded yet adaptive and perpetually expressive KV cache. Capitalizing on this, we devise a training-free, attention-agnostic pruning strategy that intelligently discards obsolete information, effectively ``rolling'' the memory forward with each new frame. Fully compatible with FlashAttention, InfiniteVGGT finally alleviates the compromise, enabling infinite-horizon streaming while outperforming existing streaming methods in long-term stability. The ultimate test for such a system is its performance over a truly infinite horizon, a capability that has been impossible to rigorously validate due to the lack of extremely long-term, continuous benchmarks. To address this critical gap, we introduce the Long3D benchmark, which, for the first time, enables a rigorous evaluation of continuous 3D geometry estimation on sequences about 10,000 frames. This provides the definitive evaluation platform for future research in long-term 3D geometry understanding. Code is available at: https://github.com/AutoLab-SAI-SJTU/InfiniteVGGT

While video streaming understanding has made significant strides, real-world applications, such as live sports broadcasting, autonomous driving, and multi-screen collaboration, inherently demand continuous, multi-stream interactions. However, existing benchmarks are confined to single-stream paradigms, leaving a critical gap in evaluating online, cross-stream reasoning. To bridge this, we introduce X-Stream, the first benchmark dedicated to multi-stream streaming understanding. Comprising 4,220 rigorously curated QA pairs across 932 videos, X-Stream evaluates 11 subtasks across multi-window, multi-view, and multi-device scenarios. Crucially, our dataset is constructed using a novel dual-verification pipeline that prevents over-reliance on a single stream. Furthermore, we pioneer the conceptualization of multi-modal large language models (MLLMs) as naive multiplexers, systematically evaluating their performance through the lens of Signal Multiplexing Theory. Our extensive online inference experiments reveal a stark reality: state-of-the-art MLLMs struggle significantly with concurrent streams, achieving only about 50% score and exhibiting poor proactive ability. Ultimately, X-Stream exposes the trade-off of current multiplexing schemes, providing both a practical evaluation protocol and empirical guidance for next-generation multi-stream agents.

To serve as real-world personal assistants, streaming video models need persistent memory that retains past experiences for later use. Yet existing streaming benchmarks and methods often focus on individual continuous videos or short clips, overlooking that real-world interactions are often intermittent and require memory to persist across interruptions. To fill this gap, we introduce APM-Bench, which reformulates real-world streaming interaction as multi-session life trajectories. It contains 549 sessions, 104 trajectories, and 2,719 candidates, spanning both objective and open-ended questions. Each session is a video with fine-grained annotations, and sessions within a trajectory revolve around related activities. Models then use persistent memory to answer questions about past sessions and provide proactive responses while maintaining real-time interaction. This raises challenges: persistent memory must be storable, selectively retain information, be injected at the right time, and remain efficient. Moreover, finite storage may leave required evidence unavailable, so assistants should recognize missing evidence. Therefore, we systematically evaluate general video models under different memory protocols and diverse specialized streaming memory systems, and test whether models acknowledge insufficient evidence. Our evaluation reveals a clear utility--latency--storage trade-off: existing methods still struggle to simultaneously achieve reliable long-term recall, low overhead, and effective proactive assistance across sessions. APM-Bench provides a comprehensive testbed for developing and comparing persistent memory systems under realistic streaming conditions. We hope it encourages future work that jointly considers utility, latency, and storage toward more practical persistent memory for real-world streaming assistants.

Recent advances in Large Language Models (LLMs) have enabled the development of Video-LLMs, advancing multimodal learning by bridging video data with language tasks. However, current video understanding models struggle with processing long video sequences, supporting multi-turn dialogues, and adapting to real-world dynamic scenarios. To address these issues, we propose StreamChat, a training-free framework for streaming video reasoning and conversational interaction. StreamChat leverages a novel hierarchical memory system to efficiently process and compress video features over extended sequences, enabling real-time, multi-turn dialogue. Our framework incorporates a parallel system scheduling strategy that enhances processing speed and reduces latency, ensuring robust performance in real-world applications. Furthermore, we introduce StreamBench, a versatile benchmark that evaluates streaming video understanding across diverse media types and interactive scenarios, including multi-turn interactions and complex reasoning tasks. Extensive evaluations on StreamBench and other public benchmarks demonstrate that StreamChat significantly outperforms existing state-of-the-art models in terms of accuracy and response times, confirming its effectiveness for streaming video understanding. Code is available at StreamChat: https://github.com/hmxiong/StreamChat.

This paper presents StreamChat, a novel approach that enhances the interaction capabilities of Large Multimodal Models (LMMs) with streaming video content. In streaming interaction scenarios, existing methods rely solely on visual information available at the moment a question is posed, resulting in significant delays as the model remains unaware of subsequent changes in the streaming video. StreamChat addresses this limitation by innovatively updating the visual context at each decoding step, ensuring that the model utilizes up-to-date video content throughout the decoding process. Additionally, we introduce a flexible and efficient crossattention-based architecture to process dynamic streaming inputs while maintaining inference efficiency for streaming interactions. Furthermore, we construct a new dense instruction dataset to facilitate the training of streaming interaction models, complemented by a parallel 3D-RoPE mechanism that encodes the relative temporal information of visual and text tokens. Experimental results demonstrate that StreamChat achieves competitive performance on established image and video benchmarks and exhibits superior capabilities in streaming interaction scenarios compared to state-of-the-art video LMM.

As streaming video generation advances, enabling real-time interaction with generated video is becoming increasingly important. We introduce StreamEval, a unified benchmark for interactive streaming video generation spanning five tasks: avatar dialogue, avatar performance, world generation, instruction editing, and reference editing. StreamEval comprises 300 scripted test cases lasting 15-300s, each specifying initial assets, incrementally arriving multimodal requests, and explicit requirements for state changes and content preservation. Performance is assessed along four evaluation dimensions: task execution, state consistency, visual fidelity, and audiovisual coordination, instantiated through ten task-specific metrics on a 0-100 scale. Evaluating 37 distinct models across 300 test cases, we find that high visual quality and identity retention do not necessarily coincide with reliable request execution or sustained state consistency. In particular, request execution remains challenging: the highest task-specific scores are 36.90 for Following among seven avatar-performance models, 25.93 for Following in text-conditioned world generation, and 15.00 for Edit Success among three reported reference-editing models. These findings identify reliable request execution under timing and preservation constraints as a central challenge for advancing omni-modal real-time interactive systems. The leaderboard is available at https://streameval.ai

Streaming video understanding demands more than watching longer videos: assistants must decide when to speak in real time, balancing responsiveness against verbosity. Yet most video-language models (VideoLLMs) are trained for offline inference, and existing streaming benchmarks externalize this timing decision to the evaluator. We address this gap with RealStreamEval, a frame-level multi-turn evaluation protocol that exposes models to sequential observations and penalizes unnecessary responses. Under this protocol, we observed that strong offline VideoLLMs retain useful visual understanding but lack an interaction policy for deciding when to respond. Motivated by this observation, we propose EvoStreaming, a self-evolved streaming adaptation framework in which the base model itself acts as data generator, relevance annotator, and roll-out policy to synthesize streaming trajectories without external supervision. With only 1{,}000 self-generated samples (139times less than the leading streaming instruction-tuning approach) and no architectural changes, EvoStreaming consistently improves the overall RealStreamEval score by up to 10.8 points across five open VideoLLM backbones (Qwen2/2.5/3-VL, InternVL-3.5, MiniCPM-V4.5) while largely preserving offline video performance. These results suggest that data-efficient interaction tuning is a practical path for adapting existing VideoLLMs to streaming assistants.

Deploying Large Language Models (LLMs) in streaming applications such as multi-round dialogue, where long interactions are expected, is urgently needed but poses two major challenges. Firstly, during the decoding stage, caching previous tokens' Key and Value states (KV) consumes extensive memory. Secondly, popular LLMs cannot generalize to longer texts than the training sequence length. Window attention, where only the most recent KVs are cached, is a natural approach -- but we show that it fails when the text length surpasses the cache size. We observe an interesting phenomenon, namely attention sink, that keeping the KV of initial tokens will largely recover the performance of window attention. In this paper, we first demonstrate that the emergence of attention sink is due to the strong attention scores towards initial tokens as a ``sink'' even if they are not semantically important. Based on the above analysis, we introduce StreamingLLM, an efficient framework that enables LLMs trained with a finite length attention window to generalize to infinite sequence lengths without any fine-tuning. We show that StreamingLLM can enable Llama-2, MPT, Falcon, and Pythia to perform stable and efficient language modeling with up to 4 million tokens and more. In addition, we discover that adding a placeholder token as a dedicated attention sink during pre-training can further improve streaming deployment. In streaming settings, StreamingLLM outperforms the sliding window recomputation baseline by up to 22.2x speedup. Code and datasets are provided at https://github.com/mit-han-lab/streaming-llm.

Deep learning time-series processing often relies on convolutional neural networks with overlapping windows. This overlap allows the network to produce an output faster than the window length. However, it introduces additional computations. This work explores the potential to optimize computational efficiency during inference by exploiting convolution's shift-invariance properties to skip the calculation of layer activations between successive overlapping windows. Although convolutions are shift-invariant, zero-padding and pooling operations, widely used in such networks, are not efficient and complicate efficient streaming inference. We introduce StreamiNNC, a strategy to deploy Convolutional Neural Networks for online streaming inference. We explore the adverse effects of zero padding and pooling on the accuracy of streaming inference, deriving theoretical error upper bounds for pooling during streaming. We address these limitations by proposing signal padding and pooling alignment and provide guidelines for designing and deploying models for StreamiNNC. We validate our method in simulated data and on three real-world biomedical signal processing applications. StreamiNNC achieves a low deviation between streaming output and normal inference for all three networks (2.03 - 3.55% NRMSE). This work demonstrates that it is possible to linearly speed up the inference of streaming CNNs processing overlapping windows, negating the additional computation typically incurred by overlapping windows.

The core challenge for streaming video generation is maintaining the content consistency in long context, which poses high requirement for the memory design. Most existing solutions maintain the memory by compressing historical frames with predefined strategies. However, different to-generate video chunks should refer to different historical cues, which is hard to satisfy with fixed strategies. In this work, we propose MemFlow to address this problem. Specifically, before generating the coming chunk, we dynamically update the memory bank by retrieving the most relevant historical frames with the text prompt of this chunk. This design enables narrative coherence even if new event happens or scenario switches in future frames. In addition, during generation, we only activate the most relevant tokens in the memory bank for each query in the attention layers, which effectively guarantees the generation efficiency. In this way, MemFlow achieves outstanding long-context consistency with negligible computation burden (7.9% speed reduction compared with the memory-free baseline) and keeps the compatibility with any streaming video generation model with KV cache.

We propose 4Real-Video, a novel framework for generating 4D videos, organized as a grid of video frames with both time and viewpoint axes. In this grid, each row contains frames sharing the same timestep, while each column contains frames from the same viewpoint. We propose a novel two-stream architecture. One stream performs viewpoint updates on columns, and the other stream performs temporal updates on rows. After each diffusion transformer layer, a synchronization layer exchanges information between the two token streams. We propose two implementations of the synchronization layer, using either hard or soft synchronization. This feedforward architecture improves upon previous work in three ways: higher inference speed, enhanced visual quality (measured by FVD, CLIP, and VideoScore), and improved temporal and viewpoint consistency (measured by VideoScore and Dust3R-Confidence).

Applications such as embodied intelligence rely on a real-time perception-decision-action closed loop, posing stringent challenges for streaming video understanding. However, current agents suffer from fragmented capabilities, such as supporting only offline video understanding, lacking long-term multimodal memory mechanisms, or struggling to achieve real-time reasoning and proactive interaction under streaming inputs. These shortcomings have become a key bottleneck for preventing them from sustaining perception, making real-time decisions, and executing actions in real-world environments. To alleviate these issues, we propose StreamingClaw, a unified agent framework for streaming video understanding and embodied intelligence. It is also an OpenClaw-compatible framework that supports real-time, multimodal streaming interaction. StreamingClaw integrates five core capabilities: (1) It supports real-time streaming reasoning. (2) It supports reasoning about future events and proactive interaction under the online evolution of interaction objectives. (3) It supports multimodal long-term storage, hierarchical evolution, and efficient retrieval of shared memory across multiple agents. (4) It supports a closed-loop of perception-decision-action. In addition to conventional tools and skills, it also provides streaming tools and action-centric skills tailored for real-world physical environments. (5) It is compatible with the OpenClaw framework, allowing it to fully leverage the resources and support of the open-source community. With these designs, StreamingClaw integrates online real-time reasoning, multimodal long-term memory, and proactive interaction within a unified framework. Moreover, by translating decisions into executable actions, it enables direct control of the physical world, supporting practical deployment of embodied interaction.

Streaming video understanding requires answering questions that arrive at arbitrary moments over an unbounded video stream. Existing systems primarily focus on what to retain in a bounded memory, yet access that memory using the same fixed-cost procedure for every query, despite substantial variation in the evidence required. We argue that deciding how deeply to access memory for each query is as important as deciding what the memory should store. To this end, we introduce StreamScout, an adaptive inference framework that maintains only a lightweight textual timeline in context as the stream unfolds. At query time, StreamScout progressively augments the timeline with up to three increasingly informative visual views: a glance at recent frames, a uniform look-back over the past stream, and query-salient retrieval. At each stage, the model answers immediately if the available evidence is sufficient; otherwise, it escalates to the next view. To improve this stop-or-escalate policy, we probe the cascade on an auxiliary set and distill the model's empirical competence boundary into supervision for a lightweight LoRA adaptation, yielding StreamScout-S. We further refine the policy through reinforcement learning, allowing the model to explore stopping behaviors beyond imitation of the distilled decisions, yielding StreamScout-R. Across three backbones and three streaming benchmarks, StreamScout and its variants consistently outperform prior streaming methods while substantially reducing inference cost and token consumption; on OVO-Bench, for instance, StreamScout-S improves Qwen3-VL-8B by 14.65 points while using 59% fewer tokens than uniform sampling and answering in 1.04 s on average.

Injecting new subjects naturally during streaming video generation requires integrating newly supplied visual references into the existing video while preserving established subjects and the scene. Encoding references independently of the current scene provides little guidance for this integration, while keeping their features in persistent memory can interfere with established context. We propose ReferStream, a framework that requires no additional training and combines reference construction using the current scene with transient cache injection. Joint Latent places reference latents in target regions of the latest scene latent, allowing reference features to be extracted in context. Cache Restoration uses these features to condition the injection chunk, then restores the overwritten global cache entries while retaining the newly generated history. This procedure incorporates new visual conditions without retraining the generator or revising emitted frames. We further introduce ReferStream Bench, a new benchmark with scheduled reference arrivals, evolving instructions, and explicit annotations of subject presence for InShot and MultiShot generation. Evaluation follows the event schedule and measures both the fidelity of new subjects and the preservation of established subjects, alongside video quality, text adherence, and count accuracy. Experiments on ReferStream Bench show higher scores for text adherence, subject similarity, and count accuracy than the compared baselines, including offline methods given all references in advance. Project page: https://xushuolin.github.io/ReferStream/.

We present StreamBridge, a simple yet effective framework that seamlessly transforms offline Video-LLMs into streaming-capable models. It addresses two fundamental challenges in adapting existing models into online scenarios: (1) limited capability for multi-turn real-time understanding, and (2) lack of proactive response mechanisms. Specifically, StreamBridge incorporates (1) a memory buffer combined with a round-decayed compression strategy, supporting long-context multi-turn interactions, and (2) a decoupled, lightweight activation model that can be effortlessly integrated into existing Video-LLMs, enabling continuous proactive responses. To further support StreamBridge, we construct Stream-IT, a large-scale dataset tailored for streaming video understanding, featuring interleaved video-text sequences and diverse instruction formats. Extensive experiments show that StreamBridge significantly improves the streaming understanding capabilities of offline Video-LLMs across various tasks, outperforming even proprietary models such as GPT-4o and Gemini 1.5 Pro. Simultaneously, it achieves competitive or superior performance on standard video understanding benchmarks.

Deploying high-quality automatic speech recognition (ASR) on edge devices requires models that jointly optimize accuracy, latency, and memory footprint while operating entirely on CPU without GPU acceleration. We conduct a systematic empirical study of state-of-the-art ASR architectures, encompassing encoder-decoder, transducer, and LLM-based paradigms, evaluated across batch, chunked, and streaming inference modes. Through a comprehensive benchmark of over 50 configurations spanning OpenAI Whisper, NVIDIA Nemotron, Parakeet TDT, Canary, Conformer Transducer, and Qwen3-ASR, we identify NVIDIA's Nemotron Speech Streaming as the strongest candidate for real-time English streaming on resource-constrained hardware. We then re-implement the complete streaming inference pipeline in ONNX Runtime and conduct a controlled evaluation of multiple post-training quantization strategies, including importance-weighted k-quant, mixed-precision schemes, and round-to-nearest quantization, combined with graph-level operator fusion. These optimizations reduce the model from 2.47 GB to as little as 0.67 GB while maintaining word error rate (WER) within 1% absolute of the full-precision PyTorch baseline. Our recommended configuration, the int4 k-quant variant, achieves 8.20% average streaming WER across eight standard benchmarks, running comfortably faster than real-time on CPU with 0.56 s algorithmic latency, establishing a new quality-efficiency Pareto point for on-device streaming ASR.

Streaming automatic speech recognition (ASR) for real-time voice agents and full-duplex dialogue must provide accurate partial transcripts with low commit latency. Existing systems commonly use a fixed chunk size, look-ahead, or target delay, or encourage emissions near estimated acoustic boundaries. These approaches do not directly optimize how much additional context to use at each output position under a single-pass, hard-commit constraint. We propose X2Streaming-ASR, which decomposes streaming recognition into when to commit and what to commit. Its three-stage training procedure first establishes streaming recognition ability, then warm-starts the commit policy with automatically probed trajectories, and finally refines the policy using character-level, segment-assigned group-relative rewards for recognition accuracy and latency. Across ten Chinese and English test sets, X2Streaming-ASR attains the lowest mean commit latency relative to forced-aligned endpoints, 32--109ms on Chinese characters and 12--85ms on English words, while recognition accuracy remains comparable to existing systems.

Current video object removal methods suffer from prohibitive latency (minutes per video) and non-causal processing that prevents real-time interaction. We present StreamErase, enabling sub-second latency with up to 26 FPS streaming generation on a single GPU. Our approach first augments a text-to-video model with mask input to generate high-quality videos that erase target objects and synthesize coherent backgrounds, but does not perform inference on the fly. As such, we progressively transfer the erasing capability from a powerful bidirectional foundation model to an efficient unidirectional streaming eraser, enabling long-horizon erasing without sacrificing visual fidelity. Several key challenges arise when generating videos over long, potentially infinite horizons: (1) bridging the domain gap from training on finite length and extrapolating to long horizons, (2) sustaining high quality by preventing error accumulation, and (3) maintaining fast inference, without increasing computational cost as the context grows. To address these challenges, we carefully designed sliding-window causal attention with attention sinks. By incorporating self-rollout with attention sinks and KV cache rolling during training, we simulate inference-time extrapolations with a fixed context window, enabling constant-speed generation of arbitrarily long videos. Finally, we establish a dedicated benchmark, LongErase, for streaming long-video object removal. Our model achieves strong performance compared to existing video object erasing models and generalizes well to real-world video scenarios, uniquely enabling infinite-length streaming. With StreamErase, users can input a mask and see the erasing results unfold in real-time, delivering a truly interactive experience.

Real-time understanding of continuous video streams is essential for interactive assistants and multimodal agents operating in dynamic environments. However, most existing video reasoning approaches follow a batch paradigm that defers reasoning until the full video context is observed, resulting in high latency and growing computational cost that are incompatible with streaming scenarios. In this paper, we introduce ThinkStream, a framework for streaming video reasoning based on a Watch--Think--Speak paradigm that enables models to incrementally update their understanding as new video observations arrive. At each step, the model performs a short reasoning update and decides whether sufficient evidence has accumulated to produce a response. To support long-horizon streaming, we propose Reasoning-Compressed Streaming Memory (RCSM), which treats intermediate reasoning traces as compact semantic memory that replaces outdated visual tokens while preserving essential context. We further train the model using a Streaming Reinforcement Learning with Verifiable Rewards scheme that aligns incremental reasoning and response timing with the requirements of streaming interaction. Experiments on multiple streaming video benchmarks show that ThinkStream significantly outperforms existing online video models while maintaining low latency and memory usage. Code, models and data will be released at https://github.com/johncaged/ThinkStream

Diffusion-based generative models have greatly impacted the speech processing field in recent years, exhibiting high speech naturalness and spawning a new research direction. Their application in real-time communication is, however, still lagging behind due to their computation-heavy nature involving multiple calls of large DNNs. Here, we present Stream.FM, a frame-causal flow-based generative model with an algorithmic latency of 32 milliseconds (ms) and a total latency of 48 ms, paving the way for generative speech processing in real-time communication. We propose a buffered streaming inference scheme and an optimized DNN architecture, show how learned few-step numerical solvers can boost output quality at a fixed compute budget, explore model weight compression to find favorable points along a compute/quality tradeoff, and contribute a model variant with 24 ms total latency for the speech enhancement task. Our work looks beyond theoretical latencies, showing that high-quality streaming generative speech processing can be realized on consumer GPUs available today. Stream.FM can solve a variety of speech processing tasks in a streaming fashion: speech enhancement, dereverberation, codec post-filtering, bandwidth extension, STFT phase retrieval, and Mel vocoding. As we verify through comprehensive evaluations and a MUSHRA listening test, Stream.FM establishes a state-of-the-art for generative streaming speech restoration, exhibits only a reasonable reduction in quality compared to a non-streaming variant, and outperforms our recent work (Diffusion Buffer) on generative streaming speech enhancement while operating at a lower latency.

We present Wan-Streamer v0.2, a latency-preserving upgrade of the native-streaming, end-to-end audio-visual interaction model. v0.2 keeps the v0.1 modeling formulation, but raises the interactive output stream from 192x336 to 640x368 while preserving approximately 200 ms model-side signal-to-signal latency at 25 FPS. The higher-resolution stream supports scene-grounded mid-shot agents whose posture, gaze, hands, nearby objects, and local scene layout remain legible during real-time conversation. To support the larger visual stream without adding user-visible delay, v0.2 keeps the thinker as a single-GPU low-latency path for streaming perception, the short language/state Transformer pass that builds the generation cache, and final decoding. The performer becomes a multi-GPU Ulysses-style context-parallel group for the expensive next-unit latent generation. Each performer rank writes incoming K/V into a pre-sharded local cache. The long high-resolution latent video sequence is split across ranks for denoising and gathered through Ulysses communication, while the much shorter audio latent sequence is generated without sequence sharding. In this split, the thinker's language/state computation reaches the performer only as K/V conditioning, so no separate language sequence has to be communicated inside the performer group. This concentrates additional hardware on visual generation while preserving the compact thinker-performer boundary, keeping total remote interaction latency at approximately 550 ms when a 350 ms bidirectional network budget is included.

A naive application of state-of-the-art bidirectional encoders for streaming sequence tagging would require encoding each token from scratch for each new token in an incremental streaming input (like transcribed speech). The lack of re-usability of previous computation leads to a higher number of Floating Point Operations (or FLOPs) and higher number of unnecessary label flips. Increased FLOPs consequently lead to higher wall-clock time and increased label flipping leads to poorer streaming performance. In this work, we present a Hybrid Encoder with Adaptive Restart (HEAR) that addresses these issues while maintaining the performance of bidirectional encoders over the offline (or complete) inputs while improving performance on streaming (or incomplete) inputs. HEAR has a Hybrid unidirectional-bidirectional encoder architecture to perform sequence tagging, along with an Adaptive Restart Module (ARM) to selectively guide the restart of bidirectional portion of the encoder. Across four sequence tagging tasks, HEAR offers FLOP savings in streaming settings upto 71.1% and also outperforms bidirectional encoders for streaming predictions by upto +10% streaming exact match.

Streaming speech-to-text translation (StreamST) is the task of automatically translating speech while incrementally receiving an audio stream. Unlike simultaneous ST (SimulST), which deals with pre-segmented speech, StreamST faces the challenges of handling continuous and unbounded audio streams. This requires additional decisions about what to retain of the previous history, which is impractical to keep entirely due to latency and computational constraints. Despite the real-world demand for real-time ST, research on streaming translation remains limited, with existing works solely focusing on SimulST. To fill this gap, we introduce StreamAtt, the first StreamST policy, and propose StreamLAAL, the first StreamST latency metric designed to be comparable with existing metrics for SimulST. Extensive experiments across all 8 languages of MuST-C v1.0 show the effectiveness of StreamAtt compared to a naive streaming baseline and the related state-of-the-art SimulST policy, providing a first step in StreamST research.

Streaming anomaly detection requires algorithms that operate under strict constraints: bounded memory, single-pass processing, and constant-time complexity. We present PySAD, a comprehensive Python framework addressing these challenges through a unified architecture. The framework implements 17+ streaming algorithms (LODA, Half-Space Trees, xStream) with specialized components including projectors, probability calibrators, and postprocessors. Unlike existing batch-focused frameworks, PySAD enables efficient real-time processing with bounded memory while maintaining compatibility with PyOD and scikit-learn. Supporting all learning paradigms for univariate and multivariate streams, PySAD provides the most comprehensive streaming anomaly detection toolkit in Python. The source code is publicly available at github.com/selimfirat/pysad.

The rapid proliferation of LLM agent frameworks has forced developers to choose between vendor lock-in through provider-specific SDKs and complex multi-package ecosystems that obscure control flow and hinder reproducibility. Integrating tool calling across multiple LLM providers remains a core engineering challenge due to fragmented APIs, incompatible message formats, and inconsistent streaming and tool-calling behavior, making it difficult to build portable, reliable agent systems. We introduce Orchestral, a lightweight Python framework that provides a unified, type-safe interface for building LLM agents across major providers while preserving the simplicity required for scientific computing and production deployment. Orchestral defines a single universal representation for messages, tools, and LLM usage that operates seamlessly across providers, eliminating manual format translation and reducing framework-induced complexity. Automatic tool schema generation from Python type hints removes the need for handwritten descriptors while maintaining type safety across provider boundaries. A synchronous execution model with streaming support enables deterministic behavior, straightforward debugging, and real-time interaction without introducing server dependencies. The framework's modular architecture cleanly separates provider integration, tool execution, conversation orchestration, and user-facing interfaces, enabling extensibility without architectural entanglement. Orchestral supports advanced agent capabilities found in larger frameworks, including rich tool calling, context compaction, workspace sandboxing, user approval workflows, sub-agents, memory management, and MCP integration.

Recently, there has been an increasing interest in unifying streaming and non-streaming speech recognition models to reduce development, training and deployment cost. The best-known approaches rely on either window-based or dynamic chunk-based attention strategy and causal convolutions to minimize the degradation due to streaming. However, the performance gap still remains relatively large between non-streaming and a full-contextual model trained independently. To address this, we propose a dynamic chunk-based convolution replacing the causal convolution in a hybrid Connectionist Temporal Classification (CTC)-Attention Conformer architecture. Additionally, we demonstrate further improvements through initialization of weights from a full-contextual model and parallelization of the convolution and self-attention modules. We evaluate our models on the open-source Voxpopuli, LibriSpeech and in-house conversational datasets. Overall, our proposed model reduces the degradation of the streaming mode over the non-streaming full-contextual model from 41.7% and 45.7% to 16.7% and 26.2% on the LibriSpeech test-clean and test-other datasets respectively, while improving by a relative 15.5% WER over the previous state-of-the-art unified model.

Streaming video effect generation is highly desirable for live human-centric applications such as e-commerce streaming, entertainment, and vlogging, yet remains difficult due to the lack of suitable data and deployable editing models. Unlike generic video generation, this task requires real-time video-to-video editing that adds expressive effects while preserving human identity, background content, and temporal consistency. Existing acceleration efforts mainly focus on text-to-video generation, while efficient distillation for video editing remains largely underexplored. In this paper, we present StreamingEffect, a real-time human-centric streaming video effect framework. We adopt an in-context video editing architecture and train a high-quality bidirectional teacher, then distill it into a causal autoregressive student and further reduce sampling from 50 steps to 4 steps. We also introduce keyframe control, allowing reference effect frames to be injected online and propagated through the stream for interactive editing. To address the data bottleneck, we construct VideoEffect-130K, to our knowledge the largest human-centric video effect dataset, containing 70K effect videos and 60K editing videos across 600 effect categories curated from short-video and editing platforms. Experiments show that our method enables real-time, high-quality 720p video editing on a single H200 GPU.

In online streaming video understanding, a video stream continues to arrive and queries may be issued at any time. Because streaming frames grow without bound, the system must continuously compress and retain information from the observed video prefix while future frames and future queries remain unknown. The core challenge is deciding what information to retain and how to organize the maintained history: as this history grows with the stream, memory cost increases and many redundant visual details are retained, whereas later queries often depend on specific entities, actions, and their temporal changes. To address this challenge, we introduce FOLIO, a training-free focused semantic memory system that records important parts of the stream in higher detail while keeping surrounding context compact. As the stream arrives, FOLIO updates memory at the segment level, guided by a dynamic focus state, combining a short-term visual buffer with a long-term semantic memory organized around observed entities and linked to a visual-evidence cache. At query time, lightweight hybrid retrieval combines direct matching over the structured memory with semantic query expansion. FOLIO achieves state-of-the-art performance, reaching 82.0/69.1 Perception/Backward accuracy on OVO-Bench with Qwen3-VL-8B and 74.5 overall accuracy on StreamingBench, while substantially reducing the cost of maintaining streaming memory by reserving detailed records for focused entities and storing surrounding context compactly.

Streaming speech enhancement requires balancing algorithmic latency against quality, yet existing approaches largely treat this as a binary causal versus non-causal choice. LaCo-SENet addresses this issue with two mechanisms parameterized by a single training-time hyperparameter. First, asymmetric temporal padding redistributes past and future context in convolutions, enabling systematic latency configuration. Second, dual-buffer streaming combines state buffers for past context with lookahead buffers that supply future context at both the input and feature levels. Selective state updates also prevent future-frame leakage into the streaming state, ensuring training-inference consistency. On VoiceBank+DEMAND, a fixed-budget (1.37M parameters) backbone yields a family of models spanning 12.5-75.0 ms, with PESQ rising from 3.35 to 3.43. At just 12.5 ms (fully causal), a PESQ of 3.35 matches or exceeds the prior causal state-of-the-art (3.27 at 46.5 ms).

Streaming video models should respond the moment an event unfolds, not after the moment has passed. Yet existing online VideoQA benchmarks remain largely retrospective. They pause the video at fixed timestamps, pose questions about current or past events, and score models only at those moments. This protocol leaves streaming predictions untested. To close this gap, we introduce SPOT-Bench, featuring multi-turn proactive queries that evaluate general streaming perception and assistive capabilities required by an always-on, real-time assistant. SPOT-Bench comes with Timeliness-F1, a consolidated metric that measures streaming predictions by their temporal precision and balanced coverage across the entire video. Our benchmark reveals: (i) offline models detect events reliably but spam predictions unprompted; (ii) post-training for silence reduces spamming but induces unresponsiveness; (iii) half of the streaming video expects no response, which we term dead-time - compute spent here does not affect response latency. These findings motivate AsynKV, a training-free streaming adaptation of offline models, that retains their event perception while improving their streaming behavior. AsynKV features a long-short term memory, utilized efficiently by scaling compute during dead-time. It serves as a strong baseline on SPOT-Bench, outperforming existing streaming models, and achieves state-of-the-art on retrospective benchmarks.

Streaming video understanding (SVU) must answer queries that arrive asynchronously while visual tokens stream continuously under strict GPU-memory and query-time latency budgets. A key challenge is delayed query: decisive cues may appear briefly, yet many subsequent updates occur before the query arrives, increasing the risk that those cues are evicted or diluted under bounded memory. We propose ProtoKV, a constant-footprint SVU memory that represents far history as a fixed-capacity summary state rather than retaining token instances. ProtoKV keeps an exact near-window KV cache and aggregates older content into a semantic-spatial prototype bank with residual statistics. At query time, each prototype is exposed through a bounded pseudo-token interface that is drop-in compatible with standard attention. Under matched budgets and comparable query-time cost, ProtoKV improves accuracy by up to 12.5 points over token-retention baselines on SVU benchmarks in the long-delay regime, with gains that grow as query delay increases.

Large reasoning models typically follow a read-then-think paradigm: they observe the complete input, reason over a static context, and then produce the answer. Yet many real-world scenarios are inherently dynamic, such as audio and video stream, where information arrives as a continuous stream and models must reason, update, and respond under partial observations. Recent streaming reasoning methods allow models to think while reading, but they largely rely on supervised imitation of pre-constructed trajectories, which limits their flexibility. In this paper, we propose AdaSR, an adaptive streaming reasoning framework that enables models to reason during input streaming and perform final deliberation once the stream is complete, learning when to think, and how much computation to allocate across different stages. To optimize this hierarchical reasoning process, we introduce Hierarchical Relative Policy Optimization (HRPO), which decomposes policy optimization into streaming reasoning and deep reasoning phases, providing more fine-grained advantage assignment instead of uniformly distributing a single sequence-level advantage over all tokens. HRPO integrates format, accuracy, and adaptive thinking rewards to enforce valid reasoning protocols, preserve final task performance, and encourage latency-aware computation allocation. Experiments show that AdaSR achieves a better balance among reasoning accuracy, computational efficiency, and streaming latency compared with supervised fine-tuning baseline. We release our code at https://github.com/EIT-NLP/StreamingLLM/tree/main/AdaSR.

Real-time co-speech gesture generation must produce 3D motion clip by clip as speech arrives. Existing streaming methods are open-loop: each clip depends on past context, but the model cannot check or correct its trajectory. Small errors therefore accumulate and cause drift over long sequences. We observe that this failure is mainly caused by the lack of a forward constraint rather than poor short-clip quality. A plausible key pose at the end of each clip provides a destination anchor that limits drift. Based on this observation, we propose StreamTalk, a closed-loop framework with a periodic generate-retrieve-refine cycle. Streaming Pose-Guided Generation first predicts a coarse clip, retrieves a plausible tail pose from a speaker-specific motion database, and refines the clip using this pose before continuing to the next window. During training, Stochastic Anchor Masking randomly masks pose and translation frames, teaching the model to recover complete motion from sparse boundary conditions. A part-aware DiT separates hand, body, and translation streams to reduce interference between global displacement and local articulation. On BEAT2, StreamTalk achieves state-of-the-art FGD, reduces long-horizon drift relative to open-loop baselines, and runs in real time at 76 FPS. Project page: https://xiangyue-zhang.github.io/StreamTalk/.

We propose a first streaming accent conversion (AC) model that transforms non-native speech into a native-like accent while preserving speaker identity, prosody and improving pronunciation. Our approach enables stream processing by modifying a previous AC architecture with an Emformer encoder and an optimized inference mechanism. Additionally, we integrate a native text-to-speech (TTS) model to generate ideal ground-truth data for efficient training. Our streaming AC model achieves comparable performance to the top AC models while maintaining stable latency, making it the first AC system capable of streaming.

Recent years have seen a surge in deep learning approaches to accelerate numerical solvers, which provide faithful but computationally intensive simulations of the physical world. These deep surrogates are generally trained in a supervised manner from limited amounts of data slowly generated by the same solver they intend to accelerate. We propose an open-source framework that enables the online training of these models from a large ensemble run of simulations. It leverages multiple levels of parallelism to generate rich datasets. The framework avoids I/O bottlenecks and storage issues by directly streaming the generated data. A training reservoir mitigates the inherent bias of streaming while maximizing GPU throughput. Experiment on training a fully connected network as a surrogate for the heat equation shows the proposed approach enables training on 8TB of data in 2 hours with an accuracy improved by 47% and a batch throughput multiplied by 13 compared to a traditional offline procedure.

The rapid development of Multimodal Large Language Models (MLLMs) has expanded their capabilities from image comprehension to video understanding. However, most of these MLLMs focus primarily on offline video comprehension, necessitating extensive processing of all video frames before any queries can be made. This presents a significant gap compared to the human ability to watch, listen, think, and respond to streaming inputs in real time, highlighting the limitations of current MLLMs. In this paper, we introduce StreamingBench, the first comprehensive benchmark designed to evaluate the streaming video understanding capabilities of MLLMs. StreamingBench assesses three core aspects of streaming video understanding: (1) real-time visual understanding, (2) omni-source understanding, and (3) contextual understanding. The benchmark consists of 18 tasks, featuring 900 videos and 4,500 human-curated QA pairs. Each video features five questions presented at different time points to simulate a continuous streaming scenario. We conduct experiments on StreamingBench with 13 open-source and proprietary MLLMs and find that even the most advanced proprietary MLLMs like Gemini 1.5 Pro and GPT-4o perform significantly below human-level streaming video understanding capabilities. We hope our work can facilitate further advancements for MLLMs, empowering them to approach human-level video comprehension and interaction in more realistic scenarios.

Online Video Large Language Models (VideoLLMs) play a critical role in supporting responsive, real-time interaction. Existing methods focus on streaming perception, lacking a synchronized logical reasoning stream. However, directly applying test-time scaling methods incurs unacceptable response latency. To address this trade-off, we propose Video Streaming Thinking (VST), a novel paradigm for streaming video understanding. It supports a thinking while watching mechanism, which activates reasoning over incoming video clips during streaming. This design improves timely comprehension and coherent cognition while preserving real-time responsiveness by amortizing LLM reasoning latency over video playback. Furthermore, we introduce a comprehensive post-training pipeline that integrates VST-SFT, which structurally adapts the offline VideoLLM to causal streaming reasoning, and VST-RL, which provides end-to-end improvement through self-exploration in a multi-turn video interaction environment. Additionally, we devise an automated training-data synthesis pipeline that uses video knowledge graphs to generate high-quality streaming QA pairs, with an entity-relation grounded streaming Chain-of-Thought to enforce multi-evidence reasoning and sustained attention to the video stream. Extensive evaluations show that VST-7B performs strongly on online benchmarks, e.g. 79.5% on StreamingBench and 59.3% on OVO-Bench. Meanwhile, VST remains competitive on offline long-form or reasoning benchmarks. Compared with Video-R1, VST responds 15.7 times faster and achieves +5.4% improvement on VideoHolmes, demonstrating higher efficiency and strong generalization across diverse video understanding tasks. Code, data, and models will be released at https://github.com/1ranGuan/VST.

The advent of large language models (LLMs) has transformed text-based services, enabling capabilities ranging from real-time translation to AI-driven chatbots. However, existing serving systems primarily focus on optimizing server-side aggregate metrics like token generation throughput, ignoring individual user experience with streamed text. As a result, under high and/or bursty load, a significant number of users can receive unfavorable service quality or poor Quality-of-Experience (QoE). In this paper, we first formally define QoE of text streaming services, where text is delivered incrementally and interactively to users, by considering the end-to-end token delivery process throughout the entire interaction with the user. Thereafter, we propose Andes, a QoE-aware serving system that enhances user experience for LLM-enabled text streaming services. At its core, Andes strategically allocates contended GPU resources among multiple requests over time to optimize their QoE. Our evaluations demonstrate that, compared to the state-of-the-art LLM serving systems like vLLM, Andes improves the average QoE by up to 3.2times under high request rate, or alternatively, it attains up to 1.6times higher request rate while preserving high QoE.

Machine unlearning aims to remove knowledge of the specific training data in a well-trained model. Currently, machine unlearning methods typically handle all forgetting data in a single batch, removing the corresponding knowledge all at once upon request. However, in practical scenarios, requests for data removal often arise in a streaming manner rather than in a single batch, leading to reduced efficiency and effectiveness in existing methods. Such challenges of streaming forgetting have not been the focus of much research. In this paper, to address the challenges of performance maintenance, efficiency, and data access brought about by streaming unlearning requests, we introduce a streaming unlearning paradigm, formalizing the unlearning as a distribution shift problem. We then estimate the altered distribution and propose a novel streaming unlearning algorithm to achieve efficient streaming forgetting without requiring access to the original training data. Theoretical analyses confirm an O(T + V_T) error bound on the streaming unlearning regret, where V_T represents the cumulative total variation in the optimal solution over T learning rounds. This theoretical guarantee is achieved under mild conditions without the strong restriction of convex loss function. Experiments across various models and datasets validate the performance of our proposed method.

Automatic Speech Recognition (ASR) has seen remarkable progress, with models like OpenAI Whisper and NVIDIA Canary achieving state-of-the-art (SOTA) performance in offline transcription. However, these models are not designed for streaming (online or real-time) transcription, due to limitations in their architecture and training methodology. We propose a method to turn the transformer encoder-decoder model into a low-latency streaming model that is careless about future context. We present an analysis explaining why it is not straightforward to convert an encoder-decoder transformer to a low-latency streaming model. Our proposed method modifies the existing (non-causal) encoder to a causal encoder by fine-tuning both the encoder and decoder using Low-Rank Adaptation (LoRA) and a weakly aligned dataset. We then propose an updated inference mechanism that utilizes the fine-tune causal encoder and decoder to yield greedy and beam-search decoding, and is shown to be locally optimal. Experiments on low-latency chunk sizes (less than 300 msec) show that our fine-tuned model outperforms existing non-fine-tuned streaming approaches in most cases, while using a lower complexity. Additionally, we observe that our training process yields better alignment, enabling a simple method for extracting word-level timestamps. We release our training and inference code, along with the fine-tuned models, to support further research and development in streaming ASR.

Multimodal Large Language Models (MLLMs) have achieved strong performance across many tasks, yet most systems remain limited to offline inference, requiring complete inputs before generating outputs. Recent streaming methods reduce latency by interleaving perception and generation, but still enforce a sequential perception-generation cycle, limiting real-time interaction. In this work, we target a fundamental bottleneck that arises when extending MLLMs to real-time video understanding: the global positional continuity constraint imposed by standard positional encoding schemes. While natural in offline inference, this constraint tightly couples perception and generation, preventing effective input-output parallelism. To address this limitation, we propose a parallel streaming framework that relaxes positional continuity through three designs: Overlapped, Group-Decoupled, and Gap-Isolated. These designs enable simultaneous perception and generation, allowing the model to process incoming inputs while producing responses in real time. Extensive experiments reveal that Group-Decoupled achieves the best efficiency-performance balance, maintaining high fluency and accuracy while significantly reducing latency. We further show that the proposed framework yields up to 2x acceleration under balanced perception-generation workloads, establishing a principled pathway toward speak-while-watching real-time systems. We make all our code publicly available: https://github.com/EIT-NLP/Speak-While-Watching.

Existing streaming multimodal models process observations incrementally but still follow a turn-based prefill-then-decode pattern, making them non-duplex: new observations cannot naturally enter an active generation stream. Proactive alternatives use micro-turn polling or external response gates, which fragment continuous interaction, decouple response timing from language generation, and complicate KV-cache-friendly serving. We introduce Aero Realtime, a 4B streaming multimodal model with a duplex architecture for realtime generation. Aero Realtime aligns video, audio, and textual output on a shared temporal grid, where each approximately 80-ms audio slot predicts either a lexical token or a silence token. This allows input and output to advance together, enabling one autoregressive objective to learn both when to respond and what to generate. During inference, Aero Realtime appends only the newest multimodal slot, carries forward the previous output state, and reuses the KV cache for efficient incremental execution. We further provide a complete training and serving recipe, including realtime QA construction, slot-aligned supervision, hardware-aware distributed training, and resumable inference. On four NVIDIA A6000 workstation GPUs, Aero Realtime maintains 84-ms median and 173-ms P95 processing lag over 20 minutes of a continuously streamed video, remaining within 200~ms of the source timeline. These results demonstrate the feasibility of fully aligned input-output modeling for duplex, proactive, and hardware-aligned multimodal interaction.

Audio is an inherently interactive modality, yet today's Large Audio Language Models (LALMs) are offline, and streaming audio models each handle only a single task such as streaming ASR or voice chatting. It is time to unify them into one online LALM: a model that, through an always-on perceive-decide-respond loop, listens to sound, environment, and instructions in real time and reacts on the fly. We formalize this regime as the Audio Interaction Model, and realize it with Audio-Interaction, a unified streaming model that retains offline task execution while adding online general audio instruction following, from dialogue to full voice chatting, deciding when to respond from the semantics of the stream. To enable this, we propose SoundFlow, a framework that instantiates the perceive-decide-respond loop end to end, from data to training to deployment, through streaming-native data construction, comprehension-aware training, and asynchronous low-latency inference for stable real-time interaction. We further construct StreamAudio-2M, a 2.6M-item streaming corpus spanning 7 fundamental abilities and 28 sub-tasks, and Proactive-Sound-Bench for evaluating proactive audio intervention. Across 8 benchmarks, Audio-Interaction preserves competitive performance on mainstream audio tasks while unlocking capabilities inaccessible to offline LALMs, including real-time ASR, streaming audio instruction following, and proactive help.

Streaming video generation (SVG) distills a pretrained bidirectional video diffusion model into an autoregressive model equipped with sliding window attention (SWA). However, SWA inevitably loses distant history during long video generation, and its computational overhead remains a critical challenge to real-time deployment. In this work, we propose Hybrid Forcing, which jointly optimizes temporal information retention and computational efficiency through a hybrid attention design. First, we introduce lightweight linear temporal attention to preserve long-range dependencies beyond the sliding window. In particular, we maintain a compact key-value state to incrementally absorb evicted tokens, retaining temporal context with negligible memory and computational overhead. Second, we incorporate block-sparse attention into the local sliding window to reduce redundant computation within short-range modeling, reallocating computational capacity toward more critical dependencies. Finally, we introduce a decoupled distillation strategy tailored to the hybrid attention design. A few-step initial distillation is performed under dense attention, then the distillation of our proposed linear temporal and block-sparse attention is activated for streaming modeling, ensuring stable optimization. Extensive experiments on both short- and long-form video generation benchmarks demonstrate that Hybrid Forcing consistently achieves state-of-the-art performance. Notably, our model achieves real-time, unbounded 832x480 video generation at 29.5 FPS on a single NVIDIA H100 GPU without quantization or model compression. The source code and trained models are available at https://github.com/leeruibin/hybrid-forcing.

We introduce Delayed Streams Modeling (DSM), a flexible formulation for streaming, multimodal sequence-to-sequence learning. Sequence-to-sequence generation is often cast in an offline manner, where the model consumes the complete input sequence before generating the first output timestep. Alternatively, streaming sequence-to-sequence rely on learning a policy for choosing when to advance on the input stream, or write to the output stream. DSM instead models already time-aligned streams with a decoder-only language model. By moving the alignment to a pre-processing step,and introducing appropriate delays between streams, DSM provides streaming inference of arbitrary output sequences, from any input combination, making it applicable to many sequence-to-sequence problems. In particular, given text and audio streams, automatic speech recognition (ASR) corresponds to the text stream being delayed, while the opposite gives a text-to-speech (TTS) model. We perform extensive experiments for these two major sequence-to-sequence tasks, showing that DSM provides state-of-the-art performance and latency while supporting arbitrary long sequences, being even competitive with offline baselines. Code, samples and demos are available at https://github.com/kyutai-labs/delayed-streams-modeling

Recent streaming video understanding methods increasingly rely on complex memory mechanisms to handle long video streams. We challenge this trend with a simple finding: a sliding-window baseline that feeds only the most recent N frames to an off-the-shelf VLM already matches or surpasses published streaming models. We formalize this baseline as SimpleStream and evaluate it against 13 major offline and online video LLM baselines on OVO-Bench and StreamingBench. Despite its simplicity, SimpleStream delivers consistently strong performance. With only 4 recent frames, it reaches 67.7% average accuracy on OVO-Bench and 80.59% on StreamingBench. Controlled ablations further show that the value of longer context is backbone-dependent rather than uniformly increasing with model scale, and reveal a consistent perception-memory trade-off: adding more historical context can improve recall, but often weakens real-time perception. This suggests that stronger memory, retrieval, or compression modules should not be taken as evidence of progress unless they clearly outperform SimpleStream under the same protocol. We therefore argue that future streaming benchmarks should separate recent-scene perception from long-range memory, so that performance improvements from added complexity can be evaluated more clearly.

Streaming video LLMs must retain evidence before its relevance to future tasks is known and respond when sufficient evidence becomes available. The challenge is to form reusable factual memory without compromising real-time perception. We introduce OneStreamer, which jointly learns query-independent evidence recording and task response through a shared proactive generation process. Its Proactive Hierarchical Caption Memory (PHCM) produces time-grounded local-detail captions and summaries of completed events. Streaming caption targets supervise the interpretation of observed video prefixes during training. At inference, model-generated records complement a recent visual window, providing reusable factual context without revisiting historical visual features. Proactive State Transition Learning (PSTL) reduces the dominance of repeated waiting states by preserving supervision at all output anchors and selecting representative state-change and state-persistence tokens. We further develop a streaming data synthesis pipeline that aligns output content and timing with available evidence. Combining the resulting streaming captions and QA with cleaned open-source data yields OneStreamer-1M, a broad-coverage streaming video interaction dataset with over one million records spanning diverse tasks. Our 4B model achieves the best results among the compared methods across all eight evaluated streaming video understanding benchmarks. Ablations show that retaining generated captions improves historical QA without degrading real-time perception. PSTL also outperforms dense state supervision while supervising only 27.5% of annotated state tokens. Together, these results support proactive generation as a shared learning interface connecting perception, memory formation, and timely response in streaming video interaction.

Zero-shot voice conversion (VC) aims to transfer timbre from a source speaker to any unseen target speaker while preserving linguistic content. Growing application scenarios demand models with streaming inference capabilities. This has created a pressing need for models that are simultaneously fast, lightweight, and high-fidelity. However, existing streaming methods typically rely on either autoregressive (AR) or non-autoregressive (NAR) frameworks, which either require large parameter sizes to achieve strong performance or struggle to generalize to unseen speakers. In this study, we propose MeanVC, a lightweight and streaming zero-shot VC approach. MeanVC introduces a diffusion transformer with a chunk-wise autoregressive denoising strategy, combining the strengths of both AR and NAR paradigms for efficient streaming processing. By introducing mean flows, MeanVC regresses the average velocity field during training, enabling zero-shot VC with superior speech quality and speaker similarity in a single sampling step by directly mapping from the start to the endpoint of the flow trajectory. Additionally, we incorporate diffusion adversarial post-training to mitigate over-smoothing and further enhance speech quality. Experimental results demonstrate that MeanVC significantly outperforms existing zero-shot streaming VC systems, achieving superior conversion quality with higher efficiency and significantly fewer parameters. Audio demos and code are publicly available at https://aslp-lab.github.io/MeanVC.

Most evaluations of External Memory Module assume a static setting: memory is built offline and queried at a fixed state. In practice, memory is streaming: new facts arrive continuously, insertions interleave with retrievals, and the memory state evolves while the model is serving queries. In this regime, accuracy and cost are governed by the full memory lifecycle, which encompasses the ingestion, maintenance, retrieval, and integration of information into generation. We present Neuromem, a scalable testbed that benchmarks External Memory Modules under an interleaved insertion-and-retrieval protocol and decomposes its lifecycle into five dimensions including memory data structure, normalization strategy, consolidation policy, query formulation strategy, and context integration mechanism. Using three representative datasets LOCOMO, LONGMEMEVAL, and MEMORYAGENTBENCH, Neuromem evaluates interchangeable variants within a shared serving stack, reporting token-level F1 and insertion/retrieval latency. Overall, we observe that performance typically degrades as memory grows across rounds, and time-related queries remain the most challenging category. The memory data structure largely determines the attainable quality frontier, while aggressive compression and generative integration mechanisms mostly shift cost between insertion and retrieval with limited accuracy gain.

Real-time synthesis of high-fidelity 3D character motion from audio is a pivotal component for next-generation interactive avatars and virtual assistants. However, most existing approaches are limited to offline processing of complete audio sequences or are constrained to specific domains, rarely handling both speech and music effectively. In this paper, we introduce a novel framework designed to generate continuous, coherent full-body motion from streaming speech and music with low latency. Central to our approach is a unified streaming architecture capable of synthesizing continuous motion from incremental audio inputs. We employ a robust training strategy that enforces strong audio dependency, allowing the model to seamlessly generalize across conversational speech and rhythmic music without requiring explicit domain labels or mode switching. Additionally, we explored Reinforcement Learning to refine the quality of online generation. Furthermore, we bridge reactive animation with intent-driven behavior via a tool-call interface that allows upstream Large Language Models to inject explicit semantic control. By combining this controllability with stream audio-driven synthesis, our framework serves as a plug-and-play solution for transforming voice agents into interactive humanoid avatars. Extensive experiments demonstrate that our method outperforms state-of-the-art realtime baselines in motion quality and synchronization while maintaining the flexibility required for live deployment. Our code, pre-trained models, and videos are available at https://robinwitch.github.io/EchoAvatar-Page.

Current video diffusion models achieve impressive generation quality but struggle in interactive applications due to bidirectional attention dependencies. The generation of a single frame requires the model to process the entire sequence, including the future. We address this limitation by adapting a pretrained bidirectional diffusion transformer to a causal transformer that generates frames on-the-fly. To further reduce latency, we extend distribution matching distillation (DMD) to videos, distilling 50-step diffusion model into a 4-step generator. To enable stable and high-quality distillation, we introduce a student initialization scheme based on teacher's ODE trajectories, as well as an asymmetric distillation strategy that supervises a causal student model with a bidirectional teacher. This approach effectively mitigates error accumulation in autoregressive generation, allowing long-duration video synthesis despite training on short clips. Our model supports fast streaming generation of high quality videos at 9.4 FPS on a single GPU thanks to KV caching. Our approach also enables streaming video-to-video translation, image-to-video, and dynamic prompting in a zero-shot manner. We will release the code based on an open-source model in the future.

Natural intelligence processes experience as a continuous stream, sensing, acting, and learning moment-by-moment in real time. Streaming learning, the modus operandi of classic reinforcement learning (RL) algorithms like Q-learning and TD, mimics natural learning by using the most recent sample without storing it. This approach is also ideal for resource-constrained, communication-limited, and privacy-sensitive applications. However, in deep RL, learners almost always use batch updates and replay buffers, making them computationally expensive and incompatible with streaming learning. Although the prevalence of batch deep RL is often attributed to its sample efficiency, a more critical reason for the absence of streaming deep RL is its frequent instability and failure to learn, which we refer to as stream barrier. This paper introduces the stream-x algorithms, the first class of deep RL algorithms to overcome stream barrier for both prediction and control and match sample efficiency of batch RL. Through experiments in Mujoco Gym, DM Control Suite, and Atari Games, we demonstrate stream barrier in existing algorithms and successful stable learning with our stream-x algorithms: stream Q, stream AC, and stream TD, achieving the best model-free performance in DM Control Dog environments. A set of common techniques underlies the stream-x algorithms, enabling their success with a single set of hyperparameters and allowing for easy extension to other algorithms, thereby reviving streaming RL.

We present Streamo, a real-time streaming video LLM that serves as a general-purpose interactive assistant. Unlike existing online video models that focus narrowly on question answering or captioning, Streamo performs a broad spectrum of streaming video tasks, including real-time narration, action understanding, event captioning, temporal event grounding, and time-sensitive question answering. To develop such versatility, we construct Streamo-Instruct-465K, a large-scale instruction-following dataset tailored for streaming video understanding. The dataset covers diverse temporal contexts and multi-task supervision, enabling unified training across heterogeneous streaming tasks. After training end-to-end on the instruction-following dataset through a streamlined pipeline, Streamo exhibits strong temporal reasoning, responsive interaction, and broad generalization across a variety of streaming benchmarks. Extensive experiments show that Streamo bridges the gap between offline video perception models and real-time multimodal assistants, making a step toward unified, intelligent video understanding in continuous video streams.

Streaming video understanding requires models to robustly encode, store, and retrieve information from a continuous video stream to support accurate video question answering (VQA). Existing state-of-the-art approaches rely on key-value caching to accumulate frame-level information over time, but use a limited number of tokens per frame, leading to the loss of fine-grained visual details. In this work, we propose scaling the token budget to enable more granular spatiotemporal understanding and reasoning. First, we find that current methods are ill-equipped to handle dense streams: their feature encoding causes query-frame similarity scores to increase over time, biasing retrieval toward later frames. To address this, we introduce an adaptive selection strategy that reduces token redundancy while preserving local spatiotemporal information. We further propose a training-free retrieval mixture-of-experts that leverages external models to better identify relevant frames. Our method, MemStream, achieves +8.0% on CG-Bench, +8.5% on LVBench, and +2.4% on VideoMME (Long) over ReKV with Qwen2.5-VL-7B.

stream-learn is a Python package compatible with scikit-learn and developed for the drifting and imbalanced data stream analysis. Its main component is a stream generator, which allows to produce a synthetic data stream that may incorporate each of the three main concept drift types (i.e. sudden, gradual and incremental drift) in their recurring or non-recurring versions. The package allows conducting experiments following established evaluation methodologies (i.e. Test-Then-Train and Prequential). In addition, estimators adapted for data stream classification have been implemented, including both simple classifiers and state-of-art chunk-based and online classifier ensembles. To improve computational efficiency, package utilises its own implementations of prediction metrics for imbalanced binary classification tasks.