Daily Papers

This is the second part of the two-paper sequence, which aims to present a comprehensive study for current-vortex sheets with or without surface tension in ideal compressible magnetohydrodynamics (MHD). The results of this paper are two-fold: First, we establish the zero-surface-tension limit of compressible current-vortex sheets under certain stability conditions on the free interface; Second, when the two-phase flows are isentropic and the density functions converge to the same constant as Mach number goes to zero, we can drop the boundedness assumption (with respect to Mach number) on high-order time derivatives by combining the paradifferential approach applied to the evolution equation of the free interface, the structure of wave equations for the total pressure and the anisotropic Sobolev spaces with suitable weights of Mach number. To our knowledge, this is the first result that rigorously justifies the incompressible limit of free-surface MHD flows. Moreover, we actually present a robust framework for the low Mach number limit of vortex-sheet problems, which was never established in any previous works.

Hypothesis: Bacterial contamination of surfaces poses a major threat to public health. Designing effective antibacterial or self-cleaning surfaces requires understanding how bacteria-laden droplets interact with solid substrates and how readily they can be removed. We hypothesize that bacterial motility critically influences the early-stage surface interaction (i.e., surface adhesion) of bacteria-laden droplets, which cannot be captured by conventional contact angle goniometry. Experiments: Sessile droplets containing live and dead Escherichia coli (E. coli) were studied to probe their wetting and interfacial behavior. Contact angle goniometry was used to probe dynamic wetting, while a cantilever-deflection-based method was used to quantify adhesion. Internal flow dynamics were visualized using micro-particle image velocimetry (PIV) and analyzed statistically. Complementary sliding experiments on moderately wettable substrates were performed to assess contact line mobility under tilt. Findings: Despite lower surface tension, droplets containing live bacteria exhibited lower surface adhesion forces than their dead counterparts, with adhesion further decreasing at higher bacterial concentrations. Micro-PIV revealed that flagellated live E. coli actively resist evaporation-driven capillary flow via upstream migration, while at higher concentrations, collective dynamics emerge, producing spatially coherent bacterial motion despite temporal variability. These coordinated flows disrupt passive transport and promote depinning of the contact line, thereby reducing adhesion. Sliding experiments confirmed enhanced contact line mobility and frequent stick-slip motion in live droplets, even with lower receding contact angles and higher hysteresis. These findings provide mechanistic insight into droplet retention, informing the design of self-cleaning/antifouling surfaces.

We present an analysis of the Rayleigh-Plesset equation for a three dimensional vacuous bubble in water. In the simplest case when the effects of surface tension are neglected, the known parametric solutions for the radius and time evolution of the bubble in terms of a hypergeometric function are briefly reviewed. By including the surface tension, we show the connection between the Rayleigh-Plesset equation and Abel's equation, and obtain the parametric rational Weierstrass periodic solutions following the Abel route. In the same Abel approach, we also provide a discussion of the nonintegrable case of nonzero viscosity for which we perform a numerical integration

Capillary-driven transport offers a simple, self-sustained alternative to externally pumped microfluidic systems, yet achieving precise control of such flows remains challenging. We experimentally and theoretically investigate capillary flow in rectangular microchannels when a liquid meniscus encounters a geometric step with varying channel width and height. Depending on the contact angle and step dimensions, the meniscus either pins or advances, defining distinct flow and no-flow regimes. Introducing a lateral offset between channel sidewalls provides an additional geometric control that enables reversible switching from a pinned to a flowing state, even for liquids with relatively high contact angles. We rationalize these transitions using numerical simulations and an energy-based scaling model that captures the balance between surface tension and Laplace pressure at the step. Finally, we demonstrate synchronization of capillary fronts in parallel microchannels by combining stepped and offset geometries. These results establish a simple, geometry-mediated mechanism for passive control and synchronization of capillary flows, expanding the design space for microfluidic systems.

We show the analogy between a generalization of the Rayleigh-Plesset equation of bubble dynamics including surface tension, elasticity and viscosity effects with a reformulation of the Friedmann-Lemaître set of equations describing the expansion of space in cosmology assuming a homogeneous and isotropic universe. By comparing both fluid and cosmic equations, we propose a bold generalization of the newly-derived cosmic equation mapping three continuum mechanics contributions. Conversely, the addition of a cosmological constant-like term in the fluid equation would lead also to a new phenomenology.

Video world models can produce visually convincing yet physically inconsistent sequences, raising concerns about their reliability for prediction and planning in embodied AI systems. Existing evaluations often rely on model-based judgments or reference videos, while direct physical tests largely focus on mechanics. We introduce World Models' Last Exam in Physics, a measurement-based benchmark for evaluating physical consistency in video world models. The benchmark comprises 40 controlled tasks spanning mechanics, optics, fluids, thermal and phase-change phenomena, electromagnetism, and surface tension. Each task pairs an initial image and a generation prompt with predefined physical criteria, enabling interpretable tests of observable physical relationships without requiring reference videos. Its evaluator combines task-observability screening with task-specific quantitative physical measurements. Experiments on eight video generation models across 1,280 videos reveal persistent physical inconsistencies and substantial variation across tasks, with the best model achieving an overall score of 57.76 out of 100. Evaluation on synthetic videos with known physical relationships provides evidence for the validity of the measurement module under controlled conditions. The evaluator also achieves higher agreement with human judgments than a direct vision-language model baseline in both within-task rankings and pairwise comparisons. By combining coverage across physical domains with scores grounded in measurable evidence and explicit measurement limitations, the benchmark provides an interpretable basis for diagnosing physical inconsistencies and tracking progress toward physically consistent video world models.

Organizations cannot address demographic disparities that they cannot see. Recent research on machine learning and fairness has emphasized that awareness of sensitive attributes, such as race and sex, is critical to the development of interventions. However, on the ground, the existence of these data cannot be taken for granted. This paper uses the domains of employment, credit, and healthcare in the United States to surface conditions that have shaped the availability of sensitive attribute data. For each domain, we describe how and when private companies collect or infer sensitive attribute data for antidiscrimination purposes. An inconsistent story emerges: Some companies are required by law to collect sensitive attribute data, while others are prohibited from doing so. Still others, in the absence of legal mandates, have determined that collection and imputation of these data are appropriate to address disparities. This story has important implications for fairness research and its future applications. If companies that mediate access to life opportunities are unable or hesitant to collect or infer sensitive attribute data, then proposed techniques to detect and mitigate bias in machine learning models might never be implemented outside the lab. We conclude that today's legal requirements and corporate practices, while highly inconsistent across domains, offer lessons for how to approach the collection and inference of sensitive data in appropriate circumstances. We urge stakeholders, including machine learning practitioners, to actively help chart a path forward that takes both policy goals and technical needs into account.

Surface bubbles are an abundant source of aerosols, with important implications for climate processes. In this context, we investigate the stability and thinning dynamics of soap films under effective gravity fields. Experiments are performed using a centrifugal thin-film balance capable of generating accelerations from 0.2 up to 100 times standard gravity, combined with thin-film interferometry to obtain time-resolved thickness maps. Across all experimental conditions, the drainage dynamics are shown to be governed by capillary suction and marginal regeneration-a mechanism in which thick regions of the film are continuously replaced by thin film elements (TFEs) formed at the meniscus. We consistently recover a thickness ratio of 0.8 - 0.9 between the TFEs and the adjacent film, in agreement with previous observations under standard gravity. The measured thinning rates also follow the predicted scaling laws. We identified that gravity has three distinct effects: (i) it induces a strong stretching of the initial film, extending well beyond the linear-elastic regime; (ii) it controls the meniscus size, and thereby the amplitude of the capillary suction and the drainage rate; and (iii) it reveals an inertia-to-viscous transition in the motion of TFEs within the film. These results are supported by theoretical modeling and highlight the robustness of marginal regeneration and capillary-driven drainage under extreme gravity conditions.

Personalized LLM systems have advanced rapidly, yet most operate in domains where user preferences are stable and ground truth is either absent or subjective. We argue that individual investor decision-making presents a uniquely challenging domain for LLM personalization - one that exposes fundamental limitations in current customization paradigms. Drawing on our system, built and deployed for AI-augmented portfolio management, we identify four axes along which individual investing exposes fundamental limitations in standard LLM customization: (1) behavioral memory complexity, where investor patterns are temporally evolving, self-contradictory, and financially consequential; (2) thesis consistency under drift, where maintaining coherent investment rationale over weeks or months strains stateless and session-bounded architectures; (3) style-signal tension, where the system must simultaneously respect personal investment philosophy and surface objective evidence that may contradict it; and (4) alignment without ground truth, where personalization quality cannot be evaluated against a fixed label set because outcomes are stochastic and delayed. We describe the architectural responses that emerged from building the system and propose open research directions for personalized NLP in high-stakes, temporally extended decision domains.

Individual chemically active drops suspended in a surfactant solution were observed to self-propel spontaneously with straight, helical, or chaotic trajectories. To elucidate how these drops can exhibit such strikingly different dynamics and `decide' what to do, we propose a minimal axisymmetric model of a spherical active drop, and show that simple and linear interface properties can lead to both steady self-propulsion of the droplet as well as chaotic behavior. The model includes two different mobility mechanisms, namely, diffusiophoresis and the Marangoni effect, that convert self-generated gradients of surfactant concentration into the flow at the droplet surface. In turn, surface-driven flow initiates surfactant advection that is the only nonlinear mechanism and, thus, the only source of dynamical complexity in our model. Numerical investigation of the fully-coupled hydrodynamic and advection diffusion problems reveals that strong advection (e.g., large droplet size) may destabilize a steadily self-propelling drop; once destabilized, the droplet spontaneously stops and a symmetric extensile flow emerges. If advection is strengthened even further in comparison with molecular diffusion, the droplet may perform chaotic oscillations. Our results indicate that the thresholds of these instabilities depend heavily on the balance between diffusiophoresis and the Marangoni effect. Using linear stability analysis, we demonstrate that diffusiophoresis promotes the onset of high-order modes of monotonic instability of the motionless drop. We argue that diffusiophoresis has a similar effect on the instabilities of a moving drop.

Air lubrication regimes were studied using simultaneous drag force measurements and multi-plane imaging to characterize the regimes and identify the governing mechanisms of drag reduction. A bubbly, transitional, and air layer regime are identified over a large range of freestream velocities (U_{infty}), air flow rates (Q_{air}), and Froude-depth numbers (Fr_d). For the lowest U_{infty}, drag reduction lags significantly behind the non-wetted area coverage at all cases and no simple correlation exists. Within the bubbly regime, a drag increase is found for low U_{infty} with large, slow-moving bubbles forming a single layer over the plate height. For higher velocities, bubbles become smaller and disperse vertically, while the drag starts decreasing. For higher Q_{air}, irrespective of U_{infty}, air patches start to form (transitional regime) and drag monotonically decreases, with the onset of the air layer regime at 60\% drag reduction. A new scaling of the associated critical Q_{air} is proposed, combining the air exit velocity, the liquid velocity close to the air layer and Fr_d. For a further increase of Q_{air} and low U_{infty}, a thicker and smoother air layer is formed with even lower drag; for higher U_{infty}, marginal differences are observed. The air layer morphology is significantly altered however, depending on Fr_d: for Fr_d>0.7, it is unbounded, extending beyond the current test section length, and for subcritical conditions (deep water regime, Fr_d<0.61) a closure is formed and the air layer transitions to a cavity of a specific length.

Wetting phenomena are widespread in both natural and technological contexts. Despite the well-established nature of this scientific field and our extensive knowledge of its underlying principles, wetting remains a dynamic and vibrant area of study. It continues to pose fundamental questions while offering innovative avenues for controlling these phenomena to develop novel applications. By tailoring the wetting properties of surfaces, researchers and engineers can design materials with specific functionalities, such as self-cleaning surfaces, anti-fog coatings, and enhanced slipperiness. Recent years have witnessed significant advancements in wetting research, owing to the exquisite control achieved in surface topography and chemistry and to the development of novel experimental techniques. Additionally, simulations and theory have played a crucial role in these advancements. They provid the fundamental knowledge and quantitative tools to control wettability and design surfaces with enhanced properties. Given these recent breakthroughs, this special collection Chemical Physics of Controlled Wettability and Super Surfaces becomes particularly timely and significant. It serves as a platform to showcase some of the latest developments in the field of wetting. It highlights the exciting progress and potential applications in controlling wetting properties that are enabled by the synergy between theory, simulations, and experiments.

Using absorbance measurements through a Couette cell containing an emulsion of buoyant droplets, volume fraction profiles are measured at various shear rates. These viscous resuspension experiments allow a direct determination of the normal stress in the vorticity direction in connection with the suspension balance model that has been developed for suspensions of solid particles. The results unambigously show that the normal viscosity responsible for the shear-induced migration of the droplets is independant on the capillary number, implying that particle deformation does not play a great role. It is similar to that of rigid particles at volume fractions below 40\% but much smaller at higher ones.

Monodisperse, purely repulsive, hard spheres (MPRHS) are an important model system for mechanistically exploring phase behavior in atomic systems and colloids. Since the 1940s, phase transitions in these systems have been obtained via simulation, theory, and experiments. But there is a gap in this literature: despite decades of reports of phase transition from one pure state to another, no computational studies report spontaneous phase separation into coexisting domains of liquid and crystal regions. This gap owes its origin to the underlying mechanism of entropically-driven phase separation in MPRHS - the competition between short-range entropy and long-range entropy. Frenkel proposed that spontaneous phase separation in simulations of up to 1,000,000 particles would require more than 317,000,000 years to sample enough microstates to converge to phase separated macrostate. Some brute-force simulations do show brief spontaneous coexistence but a metastable crystal or fluid subsequently overtakes the system. To bypass these difficulties, many studies use seeding, gravity, or direct construction of liquid and solid phases to study interfacial energy and nucleation rates of MPRHS systems. WCA potentials have also been used to bypass metastability, where softness provides free volume, lowers osmotic pressure and the energy barrier. It is argued that the transition path taken in bypassing metastability is mechanistically the same as without triggers. But as acknowledged by Alder & Wainwright, explicit observation of spontaneous coexistence is central to computational prediction of first-order transition. Such observation would provide satisfying demonstration of Frenkel's entropy exchange mechanism. We explore literature revealing these interesting behaviors and conclude that computational demonstration of Frenkel's mechanism for MPRHS awaits large systems with careful hardness perturbations.

The classical theory of the wind-driven surface layer of a rotating ocean closes the momentum balance with a local flux-gradient law, in which the turbulent stress at a given depth is proportional to the shear at that depth. It predicts a surface current deflected forty-five degrees from the wind, which exceeds most direct measurements. This study asks what follows when locality is relaxed. Beginning from the exact integral relation between turbulent stress and mean shear, and requiring the memory kernel to carry no preferred vertical scale, we obtain a power-law kernel and therefore a stress law of fractional order. The resulting equation cannot be posed on the velocity, because the fractional derivative of a bounded profile vanishes at the surface, so the wind stress cannot be applied, while the alternative definition of the derivative leaves the surface current unbounded. Posed on the stress instead, the problem is solvable in closed form in Mittag-Leffler functions at every order between zero and one. The surface deflection then depends on the closure order alone and is smaller than forty-five degrees throughout, whereas the depth-integrated transport stays exactly normal to the wind, because that constraint follows from the momentum balance and not from the closure. The far field decays as a power law rather than exponentially, and its amplitude vanishes in the local limit, so that limit is singular. Under a suddenly applied stress the surface transient decays algebraically. Three independent algorithms agree closely, and no observational or model data are used.

Uncovering the rules governing the nonequilibrium dynamics of the membranes that define biological cells is of central importance to understanding the physics of living systems. We theoretically and computationally investigate the behavior of flexible quasispherical vesicles that exchange membrane constituents, internal volume, and heat with an external reservoir. The excess chemical potential and osmotic pressure difference imposed by the reservoir act as generalized thermodynamic driving forces that modulate vesicle morphology. We show that the renormalization of membrane mechanical properties by nonequilibrium driving gives rise to a morphological transition between a weakly driven regime, in which growing vesicles remain quasispherical, and a strongly driven regime, in which vesicles accommodate rapid membrane uptake by developing surface wrinkles. Additionally, we propose a minimal vesicle growth-shape law, derived using insights from stochastic thermodynamics, that robustly describes vesicle growth dynamics even in strongly driven, far-from-equilibrium regimes.

Predicting the relationship between surface charge density and electrostatic potential for spherical particles remains a fundamental challenge in colloid science. Because the governing non-linear Poisson--Boltzmann equation lacks a general exact analytical solution, researchers typically rely on numerical calculations or various semi-empirical approximations. In this paper, we overcome these limitations by developing a dual-asymptotic framework that provides explicit, closed-form expressions for this surface charge--potential relationship across the entire spectrum of particle curvature. For weakly curved systems, where the Debye length λ_D is much smaller than the particle radius R (λ_D/R ll 1), a formal mathematical derivation rigorously establishes the Ohshima--Healy--White formula as an exact regular perturbation expansion. Conversely, for highly curved spheres (R/λ_D ll 1), we employ singular perturbation analysis using the scaled particle radius as the small parameter. This approach provides a first-principles mathematical justification for the spherical Debye--Hückel theory, proving that its leading-order expansion remains asymptotically exact within the full non-linear Poisson--Boltzmann framework due to the geometric deactivation of non-linearity. Crucially, we map the exact limits of this geometric regulation, demonstrating how non-linear screening re-emerges as the particle radius increases, with the breakdown threshold governed by the interplay between curvature and surface charge density.

Biological tissues exhibit complex behaviors with their dynamics often resembling inert soft matter such as liquids, polymers, colloids, and liquid crystals. These analogies enable physics-based approaches for investigations of emergent behaviors in biological processes. A well-studied case is the spreading of cellular aggregates on solid surfaces, where they display dynamics similar to viscous droplets. In vivo, however, cells and tissues are in a confined environment with varying geometries and mechanical properties to which they need to adapt. In this work, we compressed cellular aggregates between two solid surfaces and studied their dynamics using microscopy, and computer simulations. The confined cellular aggregates transitioned from compressed spheres into dynamic living capillary bridges exhibiting bridge thinning and a convex-to-concave meniscus curvature transition. We found that the stability of the bridge is determined by the interplay between cell growth and cell spreading on the confining surfaces. This interaction leads to bridge rupture at a critical length scale determined by the distance between the plates. The force distributions, formation and stability regimes of the living capillary bridges were characterized with full 3D computer simulations that included cell division, migration and growth dynamics, directly showing how mechanical principles govern the behavior of the living bridges; cellular aggregates display jamming and stiffening analogously to granular matter, and cell division along the long axis enhances thinning. Based on our results, we propose a new class of active soft matter behavior, where cellular aggregates exhibit liquid-like adaptation to confinement, but with self-organized rupturing driven by biological activity.

We investigate the coupling effects of the two-phase interface, viscosity ratio, and density ratio of the dispersed phase to the continuous phase on the flow statistics in two-phase Taylor-Couette turbulence at a system Reynolds number of 6000 and a system Weber number of 10 using interface-resolved three-dimensional direct numerical simulations with the volume-of-fluid method. Our study focuses on four different scenarios: neutral droplets, low-viscosity droplets, light droplets, and low-viscosity light droplets. We find that neutral droplets and low-viscosity droplets primarily contribute to drag enhancement through the two-phase interface, while light droplets reduce the system's drag by explicitly reducing Reynolds stress due to the density dependence of Reynolds stress. Additionally, low-viscosity light droplets contribute to greater drag reduction by further reducing momentum transport near the inner cylinder and implicitly reducing Reynolds stress. While interfacial tension enhances turbulent kinetic energy (TKE) transport, drag enhancement is not strongly correlated with TKE transport for both neutral droplets and low-viscosity droplets. Light droplets primarily reduce the production term by diminishing Reynolds stress, whereas the density contrast between the phases boosts TKE transport near the inner wall. Therefore, the reduction in the dissipation rate is predominantly attributed to decreased turbulence production, causing drag reduction. For low-viscosity light droplets, the production term diminishes further, primarily due to their greater reduction in Reynolds stress, while reduced viscosity weakens the density difference's contribution to TKE transport near the inner cylinder, resulting in a more pronounced reduction in the dissipation rate and consequently stronger drag reduction. Our findings provide new insights into the turbulence modulation in two-phase flow.

It is demonstrated that self-diffusion and shear viscosity data for the TIP4P/Ice water model reported recently [L. Baran, W. Rzysko and L. MacDowell, J. Chem. Phys. {\bf 158}, 064503 (2023)] obey the microscopic version of the Stokes-Einstein relation without the hydrodynamic diameter.

Chemical potential of species in solution is essential for understanding various chemical processes at interfaces. Molecular dynamics (MD) simulations, constrained by fixed compositions, cannot satisfy a constant chemical potential condition as solute species can migrate to the interface and deplete the bulk due to solute-interface interactions. In this study, we introduce a simple and computationally efficient approach named iterative constant chemical potential molecular dynamics (iCuMD) simulation, which helps simulate targeted molar concentrations of species in solution. iCuMD overcomes the limitations of conventional MD by adjusting the number of species in the solution to reach a target concentration (chemical potential). We demonstrate our approach using solid-liquid and liquid-air interfacial systems as case studies. Specifically, we perform classical force field-based MD simulations of NaCl(aq)-air and NaCl(aq)-graphite interfaces and machine learning interatomic potential (MLIP)-based MD simulations of the Na2SO4(aq)-graphene interface. Our results show that the iCuMD approach efficiently achieves the desired bulk ion concentration within two iterations and can also be integrated with MLIP-driven simulations which enable constant potential simulations with DFT-level accuracy. We show that iCuMD offers a robust and simple computational framework for constant chemical potential simulations as its only requirement is to be able to converge interfacial simulations with a measurable bulk region.

This study investigates the hydrodynamics of droplet formation in a T-shaped cylindrical microfluidic device using micro-PIV experiments and CFD simulations. Devices of 150 micro-m internal diameter were fabricated from PDMS via a cost-effective embedded templating method. Flow visualization was conducted using immiscible silicone oil and deionized water, forming water-in-oil droplets. A mathematical model coupling the Navier-Stokes and conservative level-set equations was solved using the finite element method. Detailed flow fields (velocity, pressure, and phase distribution) were obtained over a wide range of flow-rate ratios (0.1-10) and capillary numbers (0.001-0.1) to characterize droplet formation mechanisms. Phase evolution revealed distinct breakup stages (lag, filling, necking, and pinch-off) and multiple regimes (squeezing, dripping, sausage flow, and parallel flow with tip streaming). A regime map delineating droplet and non-droplet regions was developed. Droplet size, curvature, and internal flow profiles exhibited strong dependence on Ca and Qr. Scaling analysis showed linear dependence of droplet size on Qr in the squeezing regime, with curvature nearly independent of Qr. In contrast, both size and curvature followed power-law dependence on Ca and Qr in the dripping regime. Velocity fields inside droplets were laminar and parabolic in the core. Fully developed plug-like profiles appeared in squeezing, whereas front and rear regions remained developing in dripping. Correlations for droplet length, curvature, and film thickness, including a novel thin-film model incorporating visco-inertial and capillary effects, enable predictive design within the studied range. These findings advance fundamental understanding of confined droplet dynamics and provide quantitative guidelines for optimizing droplet-based microfluidic systems.

In this paper, we explore osmotic transport by means of molecular dynamics (MD) simulations. We first consider osmosis through a membrane, and investigate the reflection coefficient of an imperfectly semi-permeable membrane, in the dilute and high concentration regimes. We then explore the diffusion-osmotic flow of a solute-solvent fluid adjacent to a solid surface, driven by a chemical potential gradient parallel to the surface. We propose a novel non-equilibrium MD (NEMD) methodology to simulate diffusion-osmosis, by imposing an external force on every particle, which properly mimics the chemical potential gradient on the solute in spite of the periodic boundary conditions. This NEMD method is validated theoretically on the basis of linear-response theory by matching the mobility with their Green-Kubo expressions. Finally, we apply the framework to more realistic systems, namely a water-ethanol mixture in contact with a silica or a graphene surface.

We study the self-diffusiophoresis of a spherical chemically active particle near a planar, impermeable wall, with a focus on the influence of particle orientation on propulsion. We analyze a Janus particle with asymmetric surface chemical activity, consisting of a small inert region within a catalytically active cap. While numerical simulations have been used to study such particles, they encounter difficulties resolving the flow and transport in the extreme near-wall regime due to geometric confinement and steep solute concentration gradients. We address this limitation through an asymptotic analysis in the near-contact limit, where the gap between the particle and the wall is narrow. In particular, we consider the distinguished limit in which the inert region is asymptotically comparable in size to the lubrication region. We analyze an axisymmetric configuration in which the inert face is oriented parallel to the wall and extend the analysis to slightly tilted orientations. We find that the capsize determines whether a tilted particle rotates back toward the axisymmetric state or continues to reorient, thereby characterizing its rotational stability in the near-contact regime.

In this note, we show that the Local Molecular Field theory of Weeks et. al. can be re-derived as an extremum problem for an approximate Helmholtz free energy. Using the resulting free energy as a classical, fluid density functional yields an implicit solvent method identical in form to the Molecular Density Functional theory of Borgis et. al., but with an explicit formula for the 'ideal' free energy term. This new expression for the ideal free energy term can be computed from all-atom molecular dynamics of a solvent with only short-range interactions. The key hypothesis required to make the theory valid is that all smooth (and hence long-range) energy functions obey Gaussian statistics. This is essentially a random phase approximation for perturbations from a short-range only, 'reference,' fluid. This single hypothesis is enough to prove that the self-consistent LMF procedure minimizes a novel density functional whose 'ideal' free energy is the molecular system under a specific, reference Hamiltonian, as opposed to the non-interacting gas of conventional density functionals. Implementation of this new functional into existing software should be straightforward and robust.

Entropically driven fluid-solid transitions in monodisperse, purely repulsive hard spheres (MPRHS) are well established in theory, simulation, and experiment for atomic and colloidal systems. For MPRHS, however, coexistence is usually located via bulk free-energy calculations; the underlying microscopic balance between configurational and vibrational entropy is left implicit. Frenkel clarified this mechanism explicitly as an exchange of long-range configurational entropy for short-range vibrational entropy, but in the pristine MPRHS limit the nucleation barrier near coexistence is so high that phase separation is predicted only on astronomical time scales. Consistent with this, even unbiased simulations do not show spontaneous, equilibrium fluid-crystal coexistence; transient mixtures are mostly overtaken by a single phase; observed coexistence is still algorithmically-driven. Nearly hard-sphere colloid experiments do observe fluid-crystal coexistence, but always in the presence of unavoidable triggers such as gravity, walls, and polydispersity. We treat the hard-sphere phase diagram as settled and ask how the entropic exchange mechanism can be revealed in nearly hard-sphere colloidal simulations. We probe the mechanism on finite time scales by introducing minimal perturbations that trigger phase separation: small reductions in hardness that increase locally accessible free volume (and thus gently increase vibrational entropy), and 2-4% distributed crystal seeds. These perturbations produce coexisting fluid and crystal domains with crystal fraction, phase envelope and osmotic pressure that, with systematically increasing particle hardness, approach the hard-sphere limit. These results demonstrate that slight enhancements to vibrational entropy provide a dynamically accessible route to realizing the long-range/short-range entropy exchange required for phase separation.

The Rayleigh-Plateau instability predicts that infinitesimal perturbations of a liquid jet grow only for kR < 1, with kR = 1 marking the classical stability boundary. Here, we show that femtosecond-laser-induced cavitation generates a localized, impulsive recoil perturbation on a flowing liquid jet, enabling a two-dimensional map of jet breakup across the (kR, epsilon/R) plane. The perturbation's spacing (wavelength) and strength (amplitude) are set independently by the laser repetition rate and pulse energy, respectively. At low amplitudes, tuning the repetition rate recovers the classical Rayleigh-Plateau dispersion relation and its kR = 1 cutoff, while increasing the wavelength enables controlled generation of monodisperse droplet trains, bidisperse droplet populations, and ultimately isolated single droplets. Along the amplitude axis, low pulse energies produce a seed that amplifies only the imposed wavenumber, whereas above a critical energy Ec, the seed broadens to excite many wavenumbers simultaneously. At still higher amplitudes, we demonstrate deterministic breakup for kR > 1, extending to kR = 1.9, with laser-synchronized droplet production rates up to 0.2 MHz. These results establish localized femtosecond-laser-induced cavitation as a route to controlled Rayleigh-Plateau breakup both within and beyond the classical linear-stability boundary.

This study investigates the impact of surface functionalization, oil coating, and oil absorption on droplet impact behavior on textured polydimethylsiloxane(PDMS) substrates. The textured surfaces were fabricated with square micro-posts having spacings of 5 and 20 microns. The PDMS samples were functionalized with octadecyltrichlorosilane (OTS) to improve water repellency. Following, the surfaces were either coated with or allowed to absorb two different lubricants, silicone oil (SO-5cSt) and hexadecane. We performed detailed wetting measurements on both untreated and OTS-functionalized substrates. These measurements provided useful insights into how water and lubricants were retained and distributed under static conditions. High-speed imaging was used to capture droplet impact across a range of Weber numbers. On SO-5cSt-absorbed substrates, droplets consistently showed complete rebound at all Weber numbers, regardless of post spacing. This robust rebound was attributed to the oil's ability to fill the gaps between the posts through capillary action, while also forming a stable lubricating layer above the texture. This thin oil film reduced friction between the droplet and the surface, enabling the droplet to retain sufficient energy for complete rebound. In contrast, hexadecane-absorbed substrates displayed different dynamics. At low Weber numbers, only partial rebound was observed, while at intermediate values, droplets rebounded completely. However, droplets no longer rebounded at higher Weber numbers and remained deposited. Repeated droplet impacts further demonstrated that hexadecane-infused surfaces gradually lost oil from the textured gaps, resulting in a decline in rebound performance over time. This effect was not observed with SO-5cSt, underscoring the importance of lubricant affinity and stability.

Improvised explosives used for fishing on shallow Indonesian reefs shatter coral skeleton, yet the damage they cause has been described largely through empirical radii and ecological surveys. We formulate an idealized model of how free gas held within a coral canopy modifies the shock loading that such a charge delivers to skeletal plates. The canopy is treated as a relaxed bubbly mixture whose shock impedance follows from the conservation of mass and momentum, and the reef is represented as a layered column of water, canopy, skeletal plate, and canopy struck at normal incidence. Three closed-form results emerge. Above a crossover pressure set by the void fraction and the stiffness of seawater, the canopy becomes nearly transparent to the shock. The impulse transmitted through any lossless layered stack is independent of the canopy, so gas redistributes the pulse in time without changing its total push. A plate carries tension after reflection from its lower face only when the canopy impedance falls below a threshold fixed by the plate thickness and the pulse duration, which defines a critical thickness. For a one-kilogram charge directly overhead, a gas-rich canopy more than triples the standoff at which a twelve-centimeter plate spalls while shortening the standoff at which it is crushed. A prescribed daily cycle of photosynthetic gas makes the same charge markedly more damaging at noon than at night. Bubble dynamics show that the canopy does not reach equilibrium within the pulse, so the results are best read as upper bounds.

We construct the charged Hayward-anti-de Sitter (AdS) black hole (BH) with a cloud of strings (CS) and perfect fluid dark matter (PFDM), and analyze its extended thermodynamic phase structure. The Hayward parameter g replaces the central singularity with a de Sitter (dS) core, while the CS parameter a and the PFDM parameter β encode astrophysically motivated matter content. Treating the cosmological constant as pressure, we derive the thermodynamic quantities, verify the Smarr relation, and establish P--V criticality with a van der Waals (vdW)-like small-large BH phase transition and mean-field critical exponents. The Gibbs free energy (GFE) exhibits the characteristic swallowtail below the critical pressure. The Joule-Thomson (JT) expansion yields T_i^{rm min}/T_c approx 0.247, roughly half the Reissner--Nordström-AdS value. The parameters g and Q contract the cooling region, β expands it, and a reshapes it non-monotonically. A holographic heat engine with a rectangular cycle gives efficiencies η= 0.362--0.396 and Carnot benchmarking ratios η/η_C = 0.625--0.791 across six configurations. The CS parameter improves the engine efficiency by reducing the enthalpy at fixed thermodynamic volume, while the PFDM parameter degrades it by adding gravitational enthalpy without contributing to the mechanical work.

The use of chemical warfare agents (CWAs) in modern warfare cannot be disregarded due to their ease of use and potential for large-scale incapacitation. An effective countermeasure involves the physical adsorption of these agents, preventing their entry through the respiratory tract by non-specific adsorption. In this study, we investigate the physical interaction between potential adsorbents and model gases mimicking CWAs, thereby identifying sufficient conditions for higher physical adsorption performance. Our findings reveal that the physical adsorption capacity is highly sensitive to the surface properties of the adsorbents, with uniform development of micropores, rather than solely high surface area, emerging as a critical factor. Additionally, we identified the potential of porous organic polymers as promising alternatives to conventional activated carbon-based adsorbents. Through a facile introduction of polar sulfone functional groups on the polymer surface, we demonstrated that these polar surface polymers exhibit physical adsorption capabilities for formaldehyde under ambient conditions comparable to high-performance activated carbons. Notably, the superior activated carbon possessed a high BET surface area of 2400 m^2/g and an exceptionally uniform micropore structure with an average pore size of approximately 11 Angstroms. This research paves the way for designing adsorbents with high physical adsorption capacities tailored for CWAs protection, offering a significant advancement in developing next-generation protective materials.

The active Brownian particle (ABP) model is one of the most widely used particle-based models in studies of scalar active fluids. A collection of interacting ABPs is known to exhibit intriguing phenomena that are absent in equilibrium counterparts. A prominent example is spontaneous phase separation, known as motility-induced phase separation (MIPS), which occurs even in the absence of explicit attractive interactions. In parallel, the large-scale behavior of scalar active fluids is often modeled using continuum descriptions, namely, scalar field theories. Such scalar active field theories are usually formulated in a top-down manner, and establishing their connections to particle-based models remains challenging, with these connections not yet fully understood. To advance the microscopic derivation of scalar active field theories, we revisit the connection between ABPs interacting via a two-body potential in two dimensions and scalar field theories that include all possible terms up to fourth order in spatial gradients. Our approach is based on a pressure expansion and the renormalization group (RG) method in the context of singular perturbation theory. The RG method provides a systematic way to eliminate fast variables and identify the dynamics on the slow invariant manifold. Within this framework, scalar field theories can be obtained as RG flow equations. We also apply this method to a chiral variant of the ABP model, the chiral ABP (cABP) model, in which a constant torque biases particle rotation to the left or right. We show that the scalar field theory corresponding to the cABP model contains two ``odd'' terms in addition to those present in the scalar field theory for ABPs. The method developed here may also be useful for deriving hydrodynamic descriptions of other types of active matter systems.

In the present article we study diffuse interface models for two-phase biomembranes. We will do so by starting off with a diffuse interface model on R^n defined by two coupled phase fields u,v. The first phase field u is the diffuse approximation of the interior of the membrane; the second phase field v is the diffuse approximation of the two phases of the membrane. We prove a compactness result and a lower bound in the sense of Gamma-convergence for pairs of phase functions (u_varepsilon,v_varepsilon). As an application of this first result, we consider a diffuse approximation of a two-phase Willmore functional plus line tension energy.

To further understand their nature, micro cavitation bubbles were systematically diffused around the exterior of a test body (tube) fully submerged in a water tank. The primary purpose was to assess the feasibility of applying micro cavitation as a means of depth control for underwater vehicles, mainly but not limited to submarines. Ideally, the results would indicate the use of micro cavitation as a more efficient alternative to underwater vehicle depth control than the conventional ballast tank method. The current approach utilizes the Archimedes' principle of buoyancy to alter the density of the object affected, making it less than, or greater than the density of the surrounding fluid. However, this process is too slow for underwater vehicles to react to sudden obstacles inherent in their environment. Rather than altering its internal density, this experiment aimed to investigate the response that would occur if the density of its environment was manipulated instead. In theory, and in a hydrostatic fluid, diffusing micro air bubbles from the top surface of the submarine would dilute the column of water above it with air cavities, thus lowering the density of the water. The resulting pressure differential would then cause the submarine to gain buoyancy.

We present an analysis of an extended Rayleigh-Plesset (RP) equation for a three dimensional cell of microorganisms such as bacteria or viruses in some liquid, where the cell membrane in bacteria or the envelope (capsid) in viruses possess elastic properties. To account for rapid changes in the shape configuration of such microorganisms, the bubble membrane/envelope must be rigid to resist large pressures while being flexible to adapt to growth or decay. Such properties are embedded in the RP equation by including a pressure bending term that is proportional to the square of the curvature of the elastic wall. Analytical solutions to this extended equation are obtained in terms of elliptic functions.

Modeling the mechanics of fluid in complex scenes is vital to applications in design, graphics, and robotics. Learning-based methods provide fast and differentiable fluid simulators, however most prior work is unable to accurately model how fluids interact with genuinely novel surfaces not seen during training. We introduce SURFSUP, a framework that represents objects implicitly using signed distance functions (SDFs), rather than an explicit representation of meshes or particles. This continuous representation of geometry enables more accurate simulation of fluid-object interactions over long time periods while simultaneously making computation more efficient. Moreover, SURFSUP trained on simple shape primitives generalizes considerably out-of-distribution, even to complex real-world scenes and objects. Finally, we show we can invert our model to design simple objects to manipulate fluid flow.

We show that Hertzian particle contacts are the underlying cause of the as-yet-unexplained noninteger power laws in weakly nonlinear rheology. In the medium amplitude oscillatory shear (MAOS) region, the cubic scaling of the leading order nonlinear shear stress (σ_3 sim γ_0^{m_3}, m_3=3) is the standard expectation. Expanding on the work by Natalia et al. [J. Rheol. 64 625-635 (2020)], we report an extensive data set of noncubical, noninteger power law scalings m_3 for particle suspensions in two immiscible fluids with a capillary attractive interaction, known as capillary suspensions. Here, we show that distinct power law exponents are found for the storage and loss moduli and these noninteger scalings occur at every secondary fluid concentration for two different contact angles. These compelling results indicate that the noninteger scalings are related to the underlying microstructure of capillary suspensions. We show that the magnitude of the third harmonic elastic stress scaling m_3,elastic originates from Hertzian-like contacts in combination with the attractive capillary force. The related third harmonic viscous stress scaling m_3,viscous is, found to be associated with adhesive-controlled friction. These observations, conducted for a wide range of compositions, can help explain previous reports of noninteger scaling for materials involving particle contacts and offers a new opportunity using the variable power law exponent of MAOS rheology to reveal the physics of particle bonds and friction in the rheological response under low deformation instead of at very high shear rates.

The Earth's atmosphere is an aerosol, it contains suspended particles. When air flows over an obstacle such as an aircraft wing or tree branch, these particles may not follow the same paths as the air flowing around the obstacle. Instead the particles in the air may deviate from the path of the air and so collide with the surface of the obstacle. It is known that particle inertia can drive this deposition, and that there is a critical value of this inertia, below which no point particles deposit. Particle inertia is measured by the Stokes number, St. We show that near the critical value of the Stokes number, St_c, the amount of deposition has the unusual scaling law of exp(-1/(St-St_c)^{1/2}). The scaling is controlled by the stagnation point of the flow. This scaling is determined by the time for the particle to reach the surface of the cylinder varying as 1/(St-St_c)^{1/2}, together with the distance away from the stagnation point (perpendicular to the flow direction) increasing exponentially with time. The scaling law applies to inviscid flow, a model for flow at high Reynolds numbers. The unusual scaling means that the amount of particles deposited increases only very slowly above the critical Stokes number. This has consequences for applications ranging from rime formation and fog harvesting to pollination.

The observed cosmological constant may originate as the minimum value U_{min} of a scalar field potential, where the scalar field is frozen due to a large mass. If this vacuum is metastable, it may decay to a true vacuum either at present or in the future. Assuming its decay rate Gamma is comparable to the Hubble expansion rate H_0, we estimate the scale of true vacuum bubbles and analyze their evolution. We find that their initial formation scale is sub-millimeter and their tension causes rapid collapse if m gtrsim 1.7 cdot 10^{-3}, eV. For smaller masses, the bubbles expand at the speed of light. We extend our analysis to scalar-tensor theories with non-minimal coupling, finding that the nucleation scale of gravitational constant bubbles remains consistent with the sub-millimeter regime of General Relativity. The critical mass scale remains around 10^{-3},eV. A theoretical estimate at redshift z_{obs} sim 0.01 suggests an observable bubble radius of sim 50 Mpc, implying a gravitational transition triggered sim 300 Myr ago, with a present-day size approaching 100 Mpc. Additionally, we explore mass ranges (m < 10^{-3},eV) and non-minimal coupling xi ranges (10^{-8},eV^{2-n} - 10^{-1},eV^{2-n}) that lead to a variation Delta G/G_N within the 1%-7% range. We assume non-minimal coupling of the form F(phi)=1/kappa - xi phi^n, with kappa=8pi G_N and 2 leq n leq 9. Finally, we review various local physics or/and transition based proposed solutions to the Hubble tension, including ultra-late-time transitional models (z sim 0.01), screened fifth-force mechanisms, and the Lambda_{rm s}CDM model, which features a transition at z sim 2. We discuss observational hints supporting these scenarios and the theoretical challenges they face.

Traditional theories of electrolyte and polyelectrolyte solutions overlook ion and polymer hydration, yielding an overly idealized perspective of the thermodynamic and dynamic properties of these solutions. In particular, the propensity of certain ions to increase or decrease the water diffusion coefficient at low solution concentrations, is poorly understood, a phenomenon that correlates strongly with the Hofmeister series describing the influence of salts on the solubility and self-assembly of synthetic and biomacromolecules as well as colloidal particles. These ion-specific effects have profound ramifications in diverse biological, medical science and technological applications. We address the general problem of understanding ion and uncharged water-soluble polymer hydration through molecular dynamics (MD) simulations of representative water-soluble polymers, polyacrylamide (PAM) and polyethylene oxide (PEO), in aqueous salt solutions. Careful attention is given to the capacity of our model to reproduce observed trends of added monovalent salts on the diffusion coefficient of water. Reproducing these ion-specific trends in the mobility of water has been a recurrent challenge in prior MD simulations of aqueous solutions based on a physically realistic model of water. Our work on salt solutions represents an important advance on which we build our modeling of aqueous polymer solutions with added salts. Simulations of our model polymers reveal an extended nanoscale dynamic hydration layer having a scale on the order of one nanometer (nm) in which the mobility is perturbed from its bulk value, and the mobility gradient in this layer appears to obey a near universal functional form.

We verify a recent prediction (Eq. 3.50 in G. L. Eyink, Phys. Rev. X 11, 031054 (2021)) for the drag on an object moving through a fluid. In this prediction the velocity field is decomposed into a nonvortical (potential) and vortical contribution, and so is the associated drag force. In the Josephson-Anderson relation the vortical contribution of the drag force follows from the flux of vorticity traversing the streamlines of the corresponding potential flow. The potential component is directly determined by the plate acceleration and its added mass. The Josephson-Anderson relation is derived from the quantum description of superfluids, but remarkably applies to the classical fluid in our experiment. In our experiment a flat plate is accelerated through water using a robotic arm. This geometry is simple enough to allow analytic potential flow streamlines. The monitored plate position shows an oscillatory component of the acceleration, which adds an additional test of the Josephson-Anderson relation. The instantaneous velocity field is measured using particle image velocimetry. It enables us to evaluate Eq. 3.50 from [1] and compare its prediction to the measured drag force. We find excellent agreement, and, most remarkably find that the added mass contribution to the drag force still stands out after the flow has turned vortical. We finally comment on the requirements on the experimental techniques for evaluating the Josephson-Anderson relation.

Information on liquid jet stream flow is crucial in many real world applications. In a large number of cases, these flows fall directly onto free surfaces (e.g. pools), creating a splash with accompanying splashing sounds. The sound produced is supplied by energy interactions between the liquid jet stream and the passive free surface. In this investigation, we collect the sound of a water jet of varying flowrate falling into a pool of water, and use this sound to predict the flowrate and flowrate trajectory involved. Two approaches are employed: one uses machine-learning models trained using audio features extracted from the collected sound to predict the flowrate (and subsequently the flowrate trajectory). In contrast, the second method directly uses acoustic parameters related to the spectral energy of the liquid-liquid interaction to estimate the flowrate trajectory. The actual flowrate, however, is determined directly using a gravimetric method: tracking the change in mass of the pooling liquid over time. We show here that the two methods agree well with the actual flowrate and offer comparable performance in accurately predicting the flowrate trajectory, and accordingly offer insights for potential real-life applications using sound.

A recent experiment has reported that body-centered cubic (bcc)-structured Ag is realized by bending face-centered cubic (fcc)-structured Ag nanowires [S. Sun {\it et al}., Phys. Rev. Lett. {\bf 128}, 015701 (2022)]. However, the bcc phase has been observed only near the Ag surface. Here, we explore how the bcc phase is stabilized near the surface by compressions. Our first-principles calculations for noble metals, Cu, Ag, and Au, indicate that body-centered tetragonal (bct) rather than bcc structure is preferred due to the surface effect. The bct-fcc boundary treated as a fixed boundary condition is necessary to thermodynamically stabilize the bct phase of Ag nanowire. The correlation between crystal structure and electron density-of-states is also discussed for three noble metals.

A droplet impacting a deep fluid bath is as common as rain over the ocean. If the impact is sufficiently gentle, the mediating air layer remains intact, and the droplet may rebound completely from the interface. In this work, we experimentally investigate the role of translational bath motion on the bouncing to coalescence transition. Over a range of parameters, we find that the relative bath motion systematically decreases the normal Weber number required to transition from bouncing to merging. Direct numerical simulations demonstrate that the depression created during impact combined with the translational motion of the bath enhances the air layer drainage on the upstream side of the droplet, ultimately favoring coalescence. A simple geometric argument is presented that rationalizes the collapse of the experimental threshold data, extending what is known for the case of axisymmetric normal impacts to the more general 3D scenario of interest herein.

We study the Cauchy problem for the one-dimensional isothermal compressible Navier--Stokes system with the van der Waals equation of state, and analyze the well-posedness and asymptotic stability of steady-state phase-transition solutions at subcritical temperatures. Working in Lagrangian coordinates, we use variational techniques to construct piecewise smooth steady-state solutions corresponding to two-phase equilibrium states under finite-mass perturbations. Introducing artificial-viscosity regularization, we first establish existence of the global minimizer of the regularized variational problem, unique within each fixed symmetry class; passing to the vanishing artificial-viscosity limit then yields a physically admissible steady-state solution with two phase interfaces. For initial perturbations that are small with respect to energy, piecewise-gradient, total-variation, and integral norms but may exhibit large pointwise jumps across phase boundaries, we derive uniform a priori bounds for weak solutions near the two-phase equilibrium profile. We further prove that these global weak solutions converge to the steady-state two-phase equilibrium in L^infty(R) as ttoinfty, thereby characterizing their large-time asymptotic behavior. Physically, finite mass perturbations break the uniqueness of the uniform steady state and generate infinitely many piecewise constant two-phase equilibria satisfying the Maxwell equal-area rule. Artificial viscosity acts as a selection principle that singles out the physically relevant two-interface steady-state configuration, and this two-phase equilibrium is asymptotically stable under small integral perturbations that allow large-amplitude discontinuities at phase interfaces.

Bubbles frequently emerge in dense chiral active fluids, yet it remains unclear whether they result from an instability of the homogeneous state or from rare nucleation events within a metastable phase. Here we develop a nucleation theory for chiral bubble formation by reducing the hydrodynamic equations to a single collective coordinate, the bubble radius. This reduction yields an effective nonlinear potential that captures the radial dynamics and predicts distinct stable, metastable, and unstable regimes of the homogeneous state. In the metastable regime, the theory identifies a critical bubble radius and an associated effective mechanical-work barrier, while its large-radius behavior determines whether bubble growth saturates at a finite size or becomes unbounded. We further analyze the stability of circular bubbles against noncircular perturbations, finding growing modes that can lead to elongation and breakup. The theoretical predictions are tested against event-driven molecular-dynamics simulations of chiral hard disks, which reproduce the predicted trends in the critical radius, nucleation barrier, and selected bubble size. Our results establish a unified framework for stability and nucleation in chiral active fluids and suggest routes to control bubble formation in experiments with spinning colloids and chiral spinners.

The classical Coulomb gas model has served as one of the most versatile frameworks in statistical physics, connecting a vast range of phenomena across many different areas. Nonequilibrium generalisations of this model have so far been studied much more scarcely. With the abundance of contemporary research into active and driven systems, one would naturally expect that such generalisations of systems with long-ranged Coulomb-like interactions will form a fertile playground for interesting developments. Here, we present two examples of novel macroscopic behaviour that arise from nonequilibrium fluctuations in long-range interacting systems, namely (1) unscreened long-ranged correlations in strong electrolytes driven by an external electric field and the associated fluctuation-induced forces in the confined Casimir geometry, and (2) out-of-equilibrium critical behaviour in self-chemotactic models that incorporate the particle polarity in the chemotactic response of the cells. Both of these systems have nonlocal Coulomb-like interactions among their constituent particles, namely, the electrostatic interactions in the case of the driven electrolyte, and the chemotactic forces mediated by fast-diffusing signals in the case of self-chemotactic systems. The results presented here hint to the rich phenomenology of nonequilibrium effects that can arise from strong fluctuations in Coulomb interacting systems, and a rich variety of potential future directions, which are discussed.

Dislocation model of the supersolid state of ^4He was proposed in 1987 by one of the authors of the review. The model obtained strong support by numerous experimental and theoretical investigations from 2007 to date. In these investigations the validity of the idea put forward in 1987 was confirmed, and new conceptions of superclimb of dislocations and of the giant isochoric compressibility or the syringe effect were proposed. In this paper we review main achievements of theoretical and experimental studies of dislocation-induced supersolid and present current understanding of this phenomenon.

Repeated impacts of a droplet on a vertically forced bath can produce a growing Faraday-wave response under forcing conditions for which the corresponding initially undisturbed bath remains linearly stable. We investigate this mechanism using axisymmetric two-phase direct numerical simulations over a wide range of Reynolds and Weber numbers. The resulting phenomenological regime map identifies quasi-periodic, decaying, faint, and unstable-bath responses. Along the parameter path considered here, the transition to the unstable-bath regime occurs over a narrow range of Weber numbers and varies only weakly with Reynolds number. In the unstable regime, the bath develops a coherent subharmonic response at half the forcing frequency, while disturbances in the decaying regime remain broadband and weaken between successive rebounds. Bath-only simulations show that a finite-amplitude perturbation representative of droplet impact can seed the confined radial mode susceptible to parametric forcing, initiating a growing subharmonic response below the linear instability threshold of the initially flat bath. A reduced capillary-dominated model provides a scaling estimate for the impact-equivalent perturbation amplitude, and bath-only simulations initialized with these perturbations reproduce the bounded-to-growing transition observed in the coupled simulations. Floquet analysis of the finite cylindrical bath identifies the first axisymmetric Neumann mode as having the lowest subharmonic instability threshold. A time-resolved Bessel decomposition independently shows that the growing bath response is dominated by the same radial mode, while the droplet-induced subharmonic response projects predominantly onto this structure. These results identify a finite-amplitude route by which localized droplet impacts can access Faraday-wave dynamics below the linear onset threshold of an initially undisturbed bath.

The interstellar medium (ISM) is all but empty. To date, more than 300 molecules have already been discovered. Because of the extremely low temperature, the gas-phase chemistry is dominated by barrierless exothermic reactions of radicals and ions. However, several abundant molecules and organic molecules cannot be produced efficiently by gas-phase reactions. To explain the existence of such molecules in the ISM, gas-surface interactions between small molecules and dust particles covered with amorphous solid water (ASW) mantles must be considered. In general, surface processes such as adsorption, diffusion, desorption, and chemical reactions can be linked to the binding energy of molecules to the surface. Hence, a lot of studies have been performed to identify the binding energies of interstellar molecules on ASW surfaces. Cosmic radiation and free electrons may induce a negative charge on the dust particles, and the binding energies may be affected by this charge. In this study, we calculate the binding energies of CO, CH4, and NH3, on neutral and charged ASW surfaces using DFT calculations. Our results indicate that CO can interact with the surface charge, increasing its binding energy. In contrast, the binding energy of CH4 remains unchanged in the presence of surface charge, and that of NH3 typically decreases.

This review presents the elastic theory of low-dimensional (one- and two-dimensional) continua and its applications in bio- and nano-structures. First, the curve and surface theory, as the geometric representation of the low-dimensional continua, is briefly described through Cartan moving frame method. The elastic theory of Kirchhoff rod, Helfrich rod, bending-soften rod, fluid membrane, and solid shell is revisited. Secondly, the application and availability of the elastic theory of low-dimensional continua in bio-structures, including short DNA rings, lipid membranes, and cell membranes, are discussed. The kink stability of short DNA rings is addressed by using the theory of Kirchhoff rod, Helfrich rod, and bending-soften rod. The lipid membranes obey the theory of fluid membrane. A cell membrane is simplified as a composite shell of lipid bilayer and membrane skeleton, which is a little similar to the solid shell. It is found that the membrane skeleton enhances highly the mechanical stability of cell membranes. Thirdly, the application and availability of the elastic theory of low-dimensional continua in nano-structures, including graphene and carbon nanotubes, are discussed. A revised Lenosky lattice model is proposed based on the local density approximation. Its continuum form up to the second order terms of curvatures and strains is the same as the free energy of 2D solid shells. Several typical mechanical properties of carbon nanotubes are revisited and investigated based on this continuum form. It is possible to avoid introducing the controversial concepts, the Young's modulus and thickness of graphene and single-walled carbon nanotubes, with this continuum form.

The relationship between balance laws and the Principle of Virtual Work as well as the structure of contact interactions in continua remain foundational issues in Mechanics. In this work, we revisit these issues within the distributional framework emphasized by Paul Germain. We show that while the Principle of Virtual Work implies balance of forces and moments for nth-gradient continua, balance laws alone do not suffice to characterize equilibrium for n geq 2. We then reexamine Noll's classical theorem asserting that surface contact forces depend solely on the unit normal to the surface and identify the precise role of his additional assumptions, namely the absence of edge and wedge contact interactions and the boundedness of the surface contact density on the space of oriented surfaces. We demonstrate that these hypotheses fail for general higher-gradient continua. Consequently, the presence of curvature-dependent surface contact forces in such materials does not conflict with Noll's theorem and refutes his claim of their nonexistence.

Viscosity measurement is essential for process monitoring and autonomous laboratory operation, yet conventional viscometers remain invasive and require controlled laboratory environments that differ substantially from real process conditions. We present a computer-vision-based viscometer that infers viscosity by exploiting how a fixed background pattern becomes optically distorted as light refracts through the mixing-driven, continuously deforming free surface. Under diverse lighting conditions, the system achieves a mean absolute error of 0.113 in log m2 s^-1 units for regression and reaches up to 81% accuracy in viscosity-class prediction. Although performance declines for classes with closely clustered viscosity values, a multi-pattern strategy improves robustness by providing enriched visual cues. To ensure sensor reliability, we incorporate uncertainty quantification, enabling viscosity predictions with confidence estimates. This stand-off viscometer offers a practical, automation-ready alternative to existing viscometry methods.

Machine-learned coarse-grained (CG) models often suffer from noisy training data, limiting their accuracy and transferability. We propose a method to generate low-noise training data based on the potential of mean force by constraining CG beads during atomistic simulations and accumulating time-averaged forces. Implemented within the neuroevolution potential (NEP) framework, our approach achieves training accuracy comparable to atomistic models trained on density functional theory data. For liquid water, the NEP-CG model accurately reproduces densities from 1 bar to 1 GPa, successfully extrapolating beyond the 0.5 GPa training limit, with a virial correction essential for the correct equation of state. For an anisotropic C_{60} monolayer, distinguishing crystallographically distinct bead types reduces stress errors by an order of magnitude and captures directional thermal conductivity. We further introduce a multiscale NEP-AACG model integrating all-atom (AA) and CG degrees of freedom, demonstrated for gold nanowire fracture at an experimentally relevant strain rate. Computational speeds for NEP-CG models reach hundreds to thousands of ns/day using a single consumer-grade GPU. This work provides a robust framework for constructing accurate, transferable, and efficient CG models across diverse systems.

The gradual insertion method for direct calculation of the chemical potential by molecular simulation is applied in the NpT ensemble to different quadrupolar two-centre Lennard-Jones fluids at high density state points. The results agree well with Widom's test particle insertion but show at very high densities significantly smaller statistical uncertainties. The gradual insertion method, which is coupled here with preferential sampling, extends the density range where reliable information on the chemical potential can be obtained. Application details are reported.

Catalysis at solid-liquid interfaces plays a central role in the advancement of energy storage and sustainable chemical production technologies. By enabling accurate, long-time scale simulations, machine learning (ML) models have the potential to accelerate the discovery of (electro)catalysts. While prior Open Catalyst datasets (OC20 and OC22) have advanced the field by providing large-scale density functional theory (DFT) data of adsorbates on surfaces at solid-gas interfaces, they do not capture the critical role of solvent and electrolyte effects at solid-liquid interfaces. To bridge this gap, we introduce the Open Catalyst 2025 (OC25) dataset, consisting of 7,801,261 calculations across 1,511,270 unique explicit solvent environments. OC25 constitutes the largest and most diverse solid-liquid interface dataset that is currently available and provides configurational and elemental diversity: spanning 88 elements, commonly used solvents/ions, varying solvent layers, and off-equilibrium sampling. State-of-the-art models trained on the OC25 dataset exhibit energy, force, and solvation energy errors as low as 0.1 eV, 0.015 eV/A, and 0.04 eV, respectively; significantly lower than than the recently released Universal Models for Atoms (UMA-OC20). Additionally, we discuss the impact of the quality of DFT-calculated forces on model training and performance. The dataset and accompanying baseline models are made openly available for the community. We anticipate the dataset to facilitate large length-scale and long-timescale simulations of catalytic transformations at solid-liquid interfaces, advancing molecular-level insights into functional interfaces and enabling the discovery of next-generation energy storage and conversion technologies.

We investigate whether the geometry of a curved conductor--dielectric interface can modify the effective mass and propagation of scalar surface plasmons (SSPs). In the hydrodynamic limit, we describe SSPs as density perturbations in a semiclassical jellium electron gas. Using a thin--layer dimensional reduction procedure, we derive a massive Klein--Gordon equation for SSPs on the curved interface with a geometric potential. We find that under specific conditions, the geometric potential allows SSP propagation with a vanishing effective mass. We then apply the formalism to a well known analogue black hole configuration, determining the corresponding quasinormal mode frequencies. Our results show that interface curvature provides a geometric handle on plasmon propagation and localization, suggesting new possibilities for plasmon transport and analogue gravity experiments with surface plasmons.