Daily Papers

Speculative decoding accelerates autoregressive inference by verifying multiple draft tokens in a single target forward pass. However, as the context grows, existing state-of-the-art drafters become increasingly expensive, eroding the very efficiency advantage they are designed to provide. We argue that this scaling is unnecessary. A standalone language model must grow with its prefix because it is solely responsible for every token it produces. A drafter, by contrast, only proposes candidates; the target catches and corrects every error before any token is committed. The drafter's decoding cost can therefore be made entirely independent of the prefix length. We introduce LongSpark, a block-diffusion drafter that achieves this by extracting fixed-size, multiscale views from the target's verification pass, thereby eliminating the need for a growing persistent state. Extensive evaluations demonstrate that LongSpark achieves state-of-the-art end-to-end efficiency across multiple model scales and realistic serving conditions. Notably, it delivers the lowest time-per-output-token on long-context tasks while reducing the drafter's context state by several orders of magnitude.

Speculative decoding accelerates memory-bound LLM inference without quality degradation by using a fast drafter to propose multiple candidate tokens and the target model to verify them in parallel. However, conventional sequential speculative decoding suffers from mutual waiting between drafting and verification, and repeated exchange of intermediate states further increases memory access overhead. Parallel speculative decoding addresses this limitation by performing drafting and verification within a single target forward pass, allowing future drafts to be prepared while current candidates are being verified. Although effective at small batch sizes, existing parallel speculative decoding methods either require costly continual pretraining with quality degradation or suffer from low acceptance rates. More importantly, this paradigm inherently suffers from uncertainty in both the bonus token and the accepted length, leading to draft verification mismatch and causing throughput gains to collapse at large batch sizes. To address these limitations, we introduce FlexDraft, a lossless speculative decoding framework that flexibly adapts to varying batch sizes through three key designs. (1) Attention Tuning enables block diffusion drafting by tuning only the attention projectors of the final few layers on mask tokens, while keeping the autoregressive path frozen to preserve the target distribution and produce high quality drafts with minimal trainable parameters. (2) Bonus-guided Calibration uses a lightweight MLP conditioned on the resolved bonus token to calibrate draft logits, mitigating draft verification mismatch caused by bonus token uncertainty. (3) Flex Decoding dynamically switches between parallel draft and verify at small batch sizes and sequential draft then verify at large batch sizes, and adjusts verification length based on draft confidence to eliminate redundant computation.

Accelerating the inference of large language models (LLMs) is a critical challenge in generative AI. Speculative decoding (SD) methods offer substantial efficiency gains by generating multiple tokens using a single target forward pass. However, existing SD approaches require the drafter and target models to share the same vocabulary, thus limiting the pool of possible drafters, often necessitating the training of a drafter from scratch. We present three new SD methods that remove this shared-vocabulary constraint. All three methods preserve the target distribution (i.e., they are lossless) and work with off-the-shelf models without requiring additional training or modifications. Empirically, on summarization, programming, and long-context tasks, our algorithms achieve significant speedups over standard autoregressive decoding. By enabling any off-the-shelf model to serve as drafter and requiring no retraining, this work substantially broadens the applicability of the SD framework in practice.

Speculative decoding accelerates LLM inference by verifying multiple drafted tokens in parallel, allowing a single target forward pass to accept several tokens. By construction, verification computes representations for both accepted and rejected tokens. Yet, conventional drafters retain only the representations of accepted tokens, leaving the substantial verifier computation spent on rejected tokens effectively wasted. We find that these discarded hidden states generated during target forward retain useful information about future tokens that can improve subsequent drafts. However, realizing this opportunity poses two distinct challenges. At inference, recycling overhead can increase drafting latency, diminishing the speedup gained from increased acceptance length. During training, standard parallel drafter training does not produce inference-aligned rejected states, while obtaining them through sequential rollouts would sacrifice parallelism across training positions. We introduce Carryover Drafting, which addresses both challenges. Carryover recycles rejected target hidden states as temporary KV context, allowing the drafter to selectively attend to them. It reuses the drafter's existing interface and adds only a single learned embedding to distinguish rejected states from committed context. The additional KV context is replaced each drafting round, keeping its length bounded by one proposal block. We introduce parallel draft--verify--draft training that exposes the drafter to inference-aligned rejected states while preserving parallelism across training positions. Experiments with DFlash and a DSpark-derived semi-autoregressive drafter across two target models show that this simple Carryover mechanism improves average acceptance length by 6.5--14.7% and end-to-end vLLM speedup by 7.9--14.4% over the corresponding baselines, with speedup gains reaching 28.8% on translation.

Speculative decoding accelerates autoregressive generation in large language models. In each drafting stage, a lightweight draft model proposes tokens that the target model subsequently verifies. With increasingly capable draft models, we find that the target model frequently accepts all tokens produced in a drafting stage. A verification nevertheless follows each drafting stage, resulting in unnecessary target-model forward passes even when drafting could have continued. Adaptive draft length methods decide during decoding how many draft tokens precede a verification, but they raise the speedup only for autoregressive draft models. For a parallel draft model, drafting further requires target-model hidden states for draft tokens that have not been verified. We propose DLoop, a looped form of speculative decoding that adaptively performs multiple drafting stages before verification. DLoop continues drafting while the draft model remains confident and verifies all accumulated draft tokens together. Loop-aware training keeps the draft model reliable in the additional drafting stages by exposing it to its own hidden states for unverified draft tokens. By spending additional draft-model forward passes, DLoop reduces the number of target-model forward passes required for verification. Across diverse speculative decoding methods including EAGLE-3, DFlash, Domino, DSpark, and multi-token prediction modules, DLoop improves the wall-clock speedup by 5 to 41 percent while preserving lossless decoding. Code will be available at https://github.com/naver-ai/DLoop.

Speculative decoding accelerates autoregressive language models by using a lightweight drafter to propose multiple future tokens, which the target model then verifies in parallel. DFlash shows that a block diffusion drafter can generate an entire draft block in a single forward pass and achieve state-of-the-art speculative decoding performance, outperforming strong autoregressive drafters such as EAGLE-3. Vanilla DFlash, however, still verifies only a single drafted trajectory per round, potentially limiting its acceptance length. We introduce DDTree (Diffusion Draft Tree), a method that constructs a draft tree directly from the per-position distributions of a block diffusion drafter. Under a fixed node budget, DDTree uses a simple best-first heap algorithm to select the continuations that are most likely to match the target model according to a surrogate defined by the draft model's output. The resulting tree is verified efficiently in a single target model forward pass using an ancestor-only attention mask. Because DDTree builds on DFlash, a leading draft model for speculative decoding, these gains place DDTree among the leading approaches to speculative decoding.

Tree-based speculative decoding accelerates autoregressive generation by verifying a branching tree of draft tokens in a single target-model forward pass. However, existing methods prioritize maximizing token-level likelihood or the number of accepted tokens while ignoring a critical ``efficiency paradox'': the computational overhead of drafting and verifying big trees can grow super-linearly, particularly at scale. This often leads to negative wall-clock speedup when batch sizes increase or hardware saturation limits are reached. To address this, we propose SMART, a system-aware marginal analysis framework for runtime tree construction. SMART reformulates tree expansion as a hardware-aware optimization problem that directly maximizes end-to-end speedup. By applying a principled marginal benefit--cost rule at inference time, SMART expands a node only when its marginal benefit--cost ratio exceeds the tree-level speedup. SMART is training-free and serves as a plug-and-play controller for existing frameworks like MSD and EAGLE. Extensive evaluations across three MLLMs (e.g., LLaVA, Qwen2-VL) and four LLMs (e.g., Llama-3.1, DeepSeek-R1) demonstrate that SMART consistently outperforms state-of-the-art baselines. It delivers an average additional speedup of 20.0\% for MLLMs and 15.4\% for LLMs across compute-bound batching regimes and diverse GPU architectures without performance loss.

Speculative decoding accelerates autoregressive generation by verifying a draft block with a target model in parallel. Under standard greedy verification, decoding stops at the first draft token that differs from the target argmax, discarding the remaining target-scored suffix. Although accepting such a mismatch changes the decoding trajectory, it can make a contiguous suffix reusable when its tokens remain target-greedy under the realized prefix. In this paper, we introduce Approximate Speculative Decoding (ASD), a training-free verifier that replaces binary first-mismatch truncation with budgeted longest-prefix selection. ASD accepts selected mismatches subject to a local target-logit regret gate, a per-block exception cap, and a persistent request-level regret budget, then reuses the contiguous target-greedy suffix without additional approximate decisions or target-model forward passes. ASD requires neither a new draft model nor fine-tuning, and exactly reduces to standard greedy verification when the budget is zero. Experiments show that ASD improves fixed-workload throughput by 3.05%--15.26% over matched strict verification and averages a 7.78% gain across seven Qwen3-14B + DSpark-14B tasks. On DeepSeek-V4-Flash (284B) with DSpark it also raises verifier-side acceptance by roughly 10%--16% on GSM8K and MATH-500 in an FP4-to-FP8 compatibility setting. The source code is publicly available at: https://github.com/Kissmetothemoon/ASD

Autoregressive decoding is bottlenecked by its sequential nature. Speculative decoding has become a standard way to accelerate inference by using a fast draft model to predict upcoming tokens from a slower target model, and then verifying them in parallel with a single target model forward pass. However, speculative decoding itself relies on a sequential dependence between speculation and verification. We introduce speculative speculative decoding (SSD) to parallelize these operations. While a verification is ongoing, the draft model predicts likely verification outcomes and prepares speculations pre-emptively for them. If the actual verification outcome is then in the predicted set, a speculation can be returned immediately, eliminating drafting overhead entirely. We identify three key challenges presented by speculative speculative decoding, and suggest principled methods to solve each. The result is Saguaro, an optimized SSD algorithm. Our implementation is up to 2x faster than optimized speculative decoding baselines and up to 5x faster than autoregressive decoding with open source inference engines.

Recent advances in text-to-image diffusion models have demonstrated remarkable generation capabilities, yet they raise significant concerns regarding safety, copyright, and ethical implications. Existing concept erasure methods address these risks by removing sensitive concepts from pre-trained models, but most of them rely on data-intensive and computationally expensive fine-tuning, which poses a critical limitation. To overcome these challenges, inspired by the observation that the model's activations are predominantly composed of generic concepts, with only a minimal component can represent the target concept, we propose a novel training-free method (ActErase) for efficient concept erasure. Specifically, the proposed method operates by identifying activation difference regions via prompt-pair analysis, extracting target activations and dynamically replacing input activations during forward passes. Comprehensive evaluations across three critical erasure tasks (nudity, artistic style, and object removal) demonstrates that our training-free method achieves state-of-the-art (SOTA) erasure performance, while effectively preserving the model's overall generative capability. Our approach also exhibits strong robustness against adversarial attacks, establishing a new plug-and-play paradigm for lightweight yet effective concept manipulation in diffusion models.

We describe PromptBoosting, a query-efficient procedure for building a text classifier from a neural language model (LM) without access to the LM's parameters, gradients, or hidden representations. This form of "black-box" classifier training has become increasingly important as the cost of training and inference in large-scale LMs grows. But existing black-box LM classifier learning approaches are themselves computationally inefficient, typically specializing LMs to the target task by searching in a large space of (discrete or continuous) prompts using zeroth-order optimization methods. Instead of directly optimizing in prompt space, PromptBoosting obtains a small pool of prompts via a gradient-free approach and then constructs a large pool of weak learners by pairing these prompts with different elements of the LM's output distribution. These weak learners are then ensembled using the AdaBoost algorithm. The entire learning process requires only a small number of forward passes and no backward pass. Experiments show that PromptBoosting achieves state-of-the-art performance in multiple black-box few-shot classification tasks, and matches or outperforms full fine-tuning in both few-shot and standard learning paradigms, while training 10x faster than existing black-box methods.

MLLM-based GUI grounding methods commonly formulate target localization as autoregressive coordinate generation, enabling models to leverage the strong instruction-following and semantic understanding capabilities of MLLMs. However, this formulation requires the model to retain region-level target evidence while decoding coordinate tokens with the spatial precision demanded by GUI clicking. Our diagnostic analysis reveals that target-region awareness emerges in intermediate decoder layers but is neither retained nor translated into the final coordinate prediction. Existing ZoomIn-style methods address this issue through an external crop-and-rerun pass, which improves localization but increases end-to-end latency and computational cost. To retain the accuracy benefits of two-pass zooming without this extra cost, we propose InnerZoom, a single-forward framework for cross-layer evidence bridging. InnerZoom transforms target-related cues from the original forward pass into a compact cross-layer evidence state, then preserves, refines, and reinjects this state throughout later decoding layers to guide coordinate prediction. Extensive experimental results suggest that InnerZoom-4B achieves state-of-the-art performance on all six GUI grounding benchmarks, obtaining 64.7 on OSWorld-G, 40.2 on UI-Vision, 73.1 on OSWorld-GR, and 87.6 on MMBench-GUI, surpassing the previous best results by 4.1, 3.2, 2.9, and 2.3 points, respectively. Under a controlled 4B setting, InnerZoom improves the same SFT+RL baseline by 5.3 points on average and outperforms two-pass ZoomIn by 1.3 points on average, while reducing end-to-end latency by up to 31.8% and TFLOPs by about 29%. Code and models will be publicly available.

Using a diffusion model for parallel drafting is a promising approach for speculative decoding. By predicting tokens at multiple future positions in a single forward pass, diffusion drafters substantially reduce drafting latency. However, this shifts the bottleneck to verification: verifying a single sequence limits acceptance length, while verifying large draft trees incurs excessive target-model latency. We identify a key mismatch in existing draft-tree methods: existing diffusion-tree methods rank nodes by the marginal probability, ignoring that verification is prefix-conditioned. As a result, they may verify unreachable descendants of rejected prefixes, increasing latency with limited acceptance gains. To address this, we propose TAPS, a target-aware prefix selection method that turns diffusion marginals into path-conditioned acceptance estimates. TAPS then selects a compact prefix-closed subtree under a fixed verification budget, improving the acceptance-cost tradeoff rather than simply expanding the draft tree. Experiments across diverse datasets and model families demonstrate that TAPS achieves up to 7.9x lossless end-to-end speedup over vanilla autoregressive decoding, outperforming state-of-the-art DFlash and DDTree by 1.36x and 1.74x respectively. Our work is available at https://anonymous.4open.science/r/TAPS-EMNLP2026-53DD

Speculative decoding accelerates generation without changing its output, but on vision-language models (VLMs) a self-reinforcing cycle holds it back. Because an autoregressive drafter pays a sequential pass for each drafted token, it must stay small and can ill afford to attend to the image at each pass. Prior work therefore compresses or hides the image, leaving the drafter weakest on the text the image determines. We present GLANCE, a one-pass block drafter that breaks this cycle on an unmodified VLM target. Its block-diffusion head drafts a whole block in one forward pass over the target's already fused vision-language states, reading the multimodal context once, however deep the draft. The target verifies a wide candidate tree in one pass and commits exactly its greedy output. In one production engine at a fixed round budget, GLANCE decodes up to 3.05 times faster than autoregressive decoding and outpaces the production EAGLE3-VL head on average and by about 11% on grounded tasks. An entropy law explains when drafting pays, predicting the longest accepted blocks on grounded tasks, where the target's next-token entropy is lowest. Our code is available at https://github.com/js-lee-AI/GLANCE.

Speculative Decoding (SD) has emerged as a premier technique for accelerating Large Language Model (LLM) inference by decoupling token generation into rapid drafting and parallel verification. While recent advancements in self-speculation and lookahead decoding have successfully minimized drafting overhead, they have shifted the primary performance bottleneck to the verification phase. Since verification requires a full forward pass of the target model, it remains strictly memory-bandwidth bound, fundamentally limiting the maximum achievable speedup.In this paper, we introduce Quasar (Quantized Self-speculative Acceleration for Rapid Inference), a novel, training-free framework designed to overcome this "memory wall" by employing low-bit quantization specifically for the verification stage. Our empirical analysis reveals that while aggressive structural pruning significantly degrades verification accuracy, quantization-based verification preserves the logit distribution with high fidelity while effectively halving memory traffic. Extensive experiments on state-of-the-art models (e.g., OpenPangu and Qwen3) demonstrate that Quasar maintains a speculative acceptance length comparable to full-precision methods while achieving a 1.28times improvement in end-to-end throughput. Being orthogonal to existing drafting strategies, Quasar offers a generic and efficient pathway to accelerate the verification leg of speculative execution. Code is available at https://github.com/Tom-HG/Quasar.

Autoregressive large language models (LLMs) deliver strong performance but require inherently sequential decoding, leading to high inference latency and poor GPU utilization. Speculative decoding mitigates this bottleneck by using a fast draft model whose outputs are verified in parallel by the target LLM; however, existing methods still rely on autoregressive drafting, which remains sequential and limits practical speedups. Diffusion LLMs offer a promising alternative by enabling parallel generation, but current diffusion models typically underperform compared with autoregressive models. In this paper, we introduce DFlash, a speculative decoding framework that employs a lightweight block diffusion model for parallel drafting. By generating draft tokens in a single forward pass and conditioning the draft model on context features extracted from the target model, DFlash enables efficient drafting with high-quality outputs and higher acceptance rates. Experiments show that DFlash achieves over 6x lossless acceleration across a range of models and tasks, delivering up to 2.5x higher speedup than the state-of-the-art speculative decoding method EAGLE-3.

Block drafters propose several tokens in one forward pass, before earlier target tokens are realised. Their rejection mixes two losses: missing within-block path information and imperfect modelling of observable information. Accepted length cannot distinguish them. We separate the two with an information floor, the minimum expected rejection at a specified conditioning order; rejection above this floor is the model gap. Estimating both from target rollouts across four domains, four open-weight targets, and a frontier API target yields three findings. First, the all-parallel floor reaches 0.286 at the final slot on Qwen3-4B, limiting even the best proposal to 71% per-slot acceptance. Second, one realised token removes 86--100% of this floor, a locality also recovered by an independent mutual-information analysis. Third, current drafters remain far above their floors: the final-slot model gap accounts for 43--64% of DFlash rejection and 85--92% of DSpark's oracle-conditioned rejection. These findings separate the value of short-range conditioning from proposal quality. Guided by this distinction, we replace a context-independent predecessor correction with a prefix-attention head that reads committed context conditional on the predecessor. With supporting backbone components, the resulting Qwen3-4B drafter improves mean serving accepted length by 3.83% over the released DSpark checkpoint across nine tasks, without increasing the conditioning order.

In high-stakes decision-making applications of large language models (LLMs), practitioners require not only accurate LLMs but also uncertainty estimates for their predictions. Existing approaches to uncertainty estimation for LLMs require access to log-probabilities output by the model or require fine-tuning access. However, many industrial LLM products use closed-source API models, and many such API models like GPT do not return log-probabilities and may not allow fine-tuning. We introduce Pinocchio, an external calibrator that estimates the correctness of responses from black-box API models. Trained jointly on responses from seven LLMs, it achieves 0.862 AUROC predicting the correctness of held-out responses from those same models, and shows zero-shot transfer to thirteen unseen models across eight organizations. Our model needs only a single forward pass to generate an uncertainty estimate and requires no access to the target model's logits, weights, or internal states. A lightweight text only 0.8B checkpoint matches our largest model's AUROC. We release code for adding uncertainty estimation to existing repos in only two additional lines of code.

Speculative decoding is an effective and lossless approach for accelerating LLM inference. However, existing widely adopted model-based draft designs, such as EAGLE3, improve accuracy at the cost of multi-step autoregressive inference, resulting in high drafting latency and ultimately rendering the drafting stage itself a performance bottleneck. Inspired by diffusion-based large language models (dLLMs), we propose DART, which leverages parallel generation to reduce drafting latency. DART predicts logits for multiple future masked positions in parallel within a single forward pass based on hidden states of the target model, thereby eliminating autoregressive rollouts in the draft model while preserving a lightweight design. Based on these parallel logit predictions, we further introduce an efficient tree pruning algorithm that constructs high-quality draft token trees with N-gram-enforced semantic continuity. DART substantially reduces draft-stage overhead while preserving high draft accuracy, leading to significantly improved end-to-end decoding speed. Experimental results demonstrate that DART achieves a 2.03x--3.44x wall-clock time speedup across multiple datasets, surpassing EAGLE3 by 30% on average and offering a practical speculative decoding framework. Code is released at https://github.com/fvliang/DART.

We present 4DAnyone, a framework for reconstructing 4D humans from an uncalibrated monocular video by generating reconstruction-grade multiview-consistent videos and lifting them into 4D Gaussian Splatting (4DGS). Existing camera-controlled video diffusion models synthesize plausible novel-view videos but fail to maintain consistency when scaled to the tens of target views required for 4DGS reconstruction. We identify this failure as a bounded-attention-context problem: when target views exceed the capacity of a single DiT forward pass, they must be split into groups, exposing two coupled bottlenecks. On the reference-context side, conditioning on all previously generated views grows as O(N), weakening cross-view appearance guidance. On the target-context side, disjoint groups cannot directly exchange information, causing global structural drift. 4DAnyone addresses both bottlenecks with two complementary designs: Reference Context Packing (RCP) compresses growing reference views into a fixed-length mixed-resolution context with O(1) reference-context complexity, while Target Context Routing (TCR) rotates target-view groupings during denoising to share context across groups at high-noise steps and stabilize details at low-noise steps. We further build the MVGameHuman dataset using our in-house game engine and combine it with light-stage and in-the-wild video datasets for training. Experiments on DNA-Rendering and DyMVHumans show that 4DAnyone outperforms prior methods in both novel-view video quality and downstream 4DGS reconstruction, with robust in-the-wild generalization. See our project page for video results and source code: https://4danyone.github.io.

Universal Multimodal embedding models built on Multimodal Large Language Models (MLLMs) have traditionally employed contrastive learning, which aligns representations of query-target pairs across different modalities. Yet, despite its empirical success, they are primarily built on a "single-turn" formulation where each query-target pair is treated as an independent data point. This paradigm leads to computational inefficiency when scaling, as it requires a separate forward pass for each pair and overlooks potential contextual relationships between multiple queries that can relate to the same context. In this work, we introduce Multi-Turn Contrastive Learning (MuCo), a dialogue-inspired framework that revisits this process. MuCo leverages the conversational nature of MLLMs to process multiple, related query-target pairs associated with a single image within a single forward pass. This allows us to extract a set of multiple query and target embeddings simultaneously, conditioned on a shared context representation, amplifying the effective batch size and overall training efficiency. Experiments exhibit MuCo with a newly curated 5M multimodal multi-turn dataset (M3T), which yields state-of-the-art retrieval performance on MMEB and M-BEIR benchmarks, while markedly enhancing both training efficiency and representation coherence across modalities. Code and M3T are available at https://github.com/naver-ai/muco

We frame embedding inversion as conditional masked diffusion, recovering all tokens in parallel through iterative denoising rather than sequential autoregressive generation. A masked diffusion language model is conditioned on the target embedding via adaptive layer normalization, requiring only 8 forward passes through a 78M parameter model with no access to the target encoder. On 32-token sequences across three embedding models, the method achieves 81.3% token accuracy and 0.87 cosine similarity.

When researchers ask whether two transformer layers are "equivalent" for compression, they often conflate distinct tests. Replacement asks whether one layer's map can substitute for another's in place; interchange asks whether two layers approximately commute when their positions are swapped. Both are output-grounded swap-KL probes, but they need not agree: on pretrained transformers the protocol gap can change which layers look safe to prune by several-fold under the same evaluator, especially when replacement distances are high. We measure both protocols across checkpoints and architectures. On a Pythia training trajectory (410M and 1.4B), the replacement-interchange gap grows from initialization to convergence. Under one matched WikiText-2 contract at 8B scale, Qwen3-8B enters a divergent regime: interchange-guided removal is several-fold safer than replacement-guided at the same layer budgets, while Llama-3.1-8B ties the two protocols for pruning cost even though interchange KL is lower, showing metric gaps need not map one-to-one to removal. Before layer removal or merging, score both swap-KLs on the target checkpoint; the diagnostic requires only unlabeled forward passes.

Machine translation tests masked diffusion language models (dLLMs) because every source token must be rendered faithfully, while fixed canvas decoding must choose target length before denoising. Existing masked diffusion decoding work mainly studies token unmasking order, leaving this length decision under-explored despite its direct effect on coverage and redundancy. We introduce Entropy-Valley (EV), a training-free length selector that scores candidate target canvases by mean predictive entropy from all-mask forward passes and selects the canvas the backbone is most prepared to fill. Relative to a baseline using training corpus length statistics, EV recovers 64.9%, 65.3%, and 33.0% of the COMET-22 gain from reference target lengths on EntoZh, ZhtoEn, and EntoDe. Our diagnostics show that denoising-friendly lengths need not match reference lengths. Evaluation by three translation experts supports the EnleftrightarrowZh adequacy gains, with stronger evidence on ZhtoEn. Compared with a LLaMA-3-8B autoregressive (AR) model trained on the same fine-tuning data, the EV system ties on EntoZh and leads on ZhtoEn; an oracle-length diagnostic further shows that, in this masked diffusion MT setting, deciding which tokens to reveal first matters less than how the target length is supplied.

Although Neural Radiance Fields (NeRFs) have markedly improved novel view synthesis, accurate uncertainty quantification in their image predictions remains an open problem. The prevailing methods for estimating uncertainty, including the state-of-the-art Density-aware NeRF Ensembles (DANE) [29], quantify uncertainty without calibration. This frequently leads to over- or under-confidence in image predictions, which can undermine their real-world applications. In this paper, we propose a method which, for the first time, achieves calibrated uncertainties for NeRFs. To accomplish this, we overcome a significant challenge in adapting existing calibration techniques to NeRFs: a need to hold out ground truth images from the target scene, reducing the number of images left to train the NeRF. This issue is particularly problematic in sparse-view settings, where we can operate with as few as three images. To address this, we introduce the concept of a meta-calibrator that performs uncertainty calibration for NeRFs with a single forward pass without the need for holding out any images from the target scene. Our meta-calibrator is a neural network that takes as input the NeRF images and uncalibrated uncertainty maps and outputs a scene-specific calibration curve that corrects the NeRF's uncalibrated uncertainties. We show that the meta-calibrator can generalize on unseen scenes and achieves well-calibrated and state-of-the-art uncertainty for NeRFs, significantly beating DANE and other approaches. This opens opportunities to improve applications that rely on accurate NeRF uncertainty estimates such as next-best view planning and potentially more trustworthy image reconstruction for medical diagnosis. The code is available at https://niki-amini-naieni.github.io/instantcalibration.github.io/.

Multimodal large language models (MLLMs) face an inherent trade-off between faithfulness and creativity, as different tasks require varying degrees of associative reasoning. However, existing methods lack the flexibility to modulate this reasoning strength, limiting MLLMs' adaptability across factual and creative scenarios. To bridge this gap, we propose equipping MLLMs with mechanisms that enable flexible control over associative reasoning. We begin by investigating the internal mechanisms underlying associative behavior in MLLMs and find that: (1) middle layers play a pivotal role in shaping model's associative tendencies, (2) modifying representations in these layers effectively regulates associative reasoning strength, and (3) hallucinations can be exploited to derive steering vectors that guide this modulation. Building on these findings, we introduce Flexible Association Control (FlexAC), a lightweight and training-free framework for modulating associative behavior in MLLMs. FlexAC first induces hallucination-guided intermediate representations to encode associative directions. Then, it selects high-association instances to construct effective associative steering vectors, whose strengths are adaptively calibrated to balance creative guidance with output stability. Finally, recognizing the multi-dimensional nature of associative reasoning, FlexAC incorporates task-specific associative vectors derived from a forward pass on a few target-domain samples, enabling models to follow diverse associative directions and better adapt to creative tasks. Notably, our method achieves up to a 5.8x improvement in creativity on Creation-MMBench and a 29% reduction in hallucination rate on CHAIR, surpassing existing baselines and demonstrating its effectiveness in enabling flexible control over associative reasoning in MLLMs. Our code is available at https://github.com/ylhz/FlexAC.

Vision-Language-Action (VLA) models are emerging as a promising paradigm for robotic manipulation, enabling general-purpose policies trained from large corpora of demonstrations and action labels. However, adapting these models to new tasks still typically requires task-specific demonstrations, action annotations, and additional fine-tuning, making deployment costly and difficult to scale. We propose WIZARD, a weight-space meta-learning framework that sidesteps task-specific fine-tuning by generating task-specific LoRA parameters for a frozen VLA policy. Given only a language instruction and a short demonstration video, WIZARD predicts the corresponding adaptation weights in a single forward pass, without target-task action labels or test-time optimization. During meta-training, WIZARD learns to map task evidence directly to expert LoRA updates, capturing relationships between tasks in weight space. Experiments on LIBERO show that WIZARD improves performance by up to ~2x on unseen dataset collections and up to ~14x on unseen tasks. On a Franka Emika Panda, WIZARD consistently improves over a real-domain adapted baseline, showing that generated adapters provide task-level specialization beyond simulation.

Recently, increasing attention has been drawn to the internal mechanisms of convolutional neural networks, and the reason why the network makes specific decisions. In this paper, we develop a novel post-hoc visual explanation method called Score-CAM based on class activation mapping. Unlike previous class activation mapping based approaches, Score-CAM gets rid of the dependence on gradients by obtaining the weight of each activation map through its forward passing score on target class, the final result is obtained by a linear combination of weights and activation maps. We demonstrate that Score-CAM achieves better visual performance and fairness for interpreting the decision making process. Our approach outperforms previous methods on both recognition and localization tasks, it also passes the sanity check. We also indicate its application as debugging tools. Official code has been released.

The open-source model ecosystem now contains hundreds of thousands of pretrained models, yet picking the best model for a new dataset is increasingly infeasible: new models and unbenchmarked datasets emerge continuously, leaving practitioners with no prior records on either side. Existing approaches handle only fragments of this in-the-wild setting: AutoML and transferability estimation select models from small predefined pools or require expensive per-model forward passes on the target dataset, while model routing presupposes a given candidate pool. We introduce ModelLens, a unified framework for model recommendation in the wild. Our key insight is that public leaderboard interactions, though scattered and noisy, collectively trace out an implicit atlas of model capabilities across heterogeneous evaluation settings, a signal rich enough to learn from directly. By learning a performance-aware latent space over model--dataset--metric tuples, ModelLens ranks unseen models on unseen datasets without running candidates on the target dataset. On a new benchmark of 1.62M evaluation records spanning 47K models and 9.6K datasets, ModelLens surpasses baselines that either rely on metadata alone or require running each candidate on the target dataset. Its recommended Top-K pools further improve multiple representative routing methods by up to 81% across diverse QA benchmarks. Case studies on recently released benchmarks further confirm generalization to both text and vision-language tasks.

Speculative decoding speeds up autoregressive generation in Large Language Models (LLMs) through a two-step procedure, where a lightweight draft model proposes tokens which the target model then verifies in a single forward pass. Although the drafter network is small in modern architectures, its LM-head still performs projection to a large vocabulary, becoming one of the major computational bottlenecks. In prior work this issue has been predominantly addressed via static or dynamic vocabulary truncation. Yet mitigating the bottleneck, these methods bring in extra complexity, such as special vocabulary curation, sophisticated inference-time logic or modifications of the training setup. In this paper, we propose SlimSpec, a low-rank parameterization of the drafter's LM-head that compresses the inner representation rather than the output, preserving full vocabulary support. We evaluate our method with EAGLE-3 drafter across three target models and diverse benchmarks in both latency- and throughput-bound inference regimes. SlimSpec achieves 4-5times acceleration over the standard LM-head architecture while maintaining a competitive acceptance length, surpassing existing methods by up to 8-9% of the end-to-end speedup. Our method requires minimal adjustments of training and inference pipelines. Combined with the aforementioned speedup improvements, it makes SlimSpec a strong alternative across wide variety of draft LM-head architectures.

The immense model sizes of large language models (LLMs) challenge deployment on memory-limited consumer GPUs. Although model compression and parameter offloading are common strategies to address memory limitations, compression can degrade quality, and offloading maintains quality but suffers from slow inference. Speculative decoding presents a promising avenue to accelerate parameter offloading, utilizing a fast draft model to propose multiple draft tokens, which are then verified by the target LLM in parallel with a single forward pass. This method reduces the time-consuming data transfers in forward passes that involve offloaded weight transfers. Existing methods often rely on pretrained weights of the same family, but require additional training to align with custom-trained models. Moreover, approaches that involve draft model training usually yield only modest speedups. This limitation arises from insufficient alignment with the target model, preventing higher token acceptance lengths. To address these challenges and achieve greater speedups, we propose SubSpec, a plug-and-play method to accelerate parameter offloading that is lossless and training-free. SubSpec constructs a highly aligned draft model by generating low-bit quantized substitute layers from offloaded target LLM portions. Additionally, our method shares the remaining GPU-resident layers and the KV-Cache, further reducing memory overhead and enhance alignment. SubSpec achieves a high average acceptance length, delivering 9.1x speedup for Qwen2.5 7B on MT-Bench (8GB VRAM limit) and an average of 12.5x speedup for Qwen2.5 32B on popular generation benchmarks (24GB VRAM limit).

Diffusion large language models (dLLMs) have recently emerged as a promising alternative to autoregressive (AR) LLMs, offering faster inference through parallel or blockwise decoding. However, their masked language modeling formulation remains incompatible with standard token-level speculative decoding, one of the most effective acceleration techniques for AR models. In AR decoding, the causal mask preserves temporally valid token-level contexts, enabling a target model to verify multiple drafted tokens in a single forward pass. In contrast, dLLMs rely on mask tokens and bidirectional attention, causing the effective context to change across denoising steps and preventing direct token-level speculative verification. To bridge this gap, we propose a simple but effective speculative decoding algorithm for diffusion language models, named SimSD, which mainly adopts a plug-and-play masking strategy that equips dLLMs with temporally valid token-level contexts for speculative decoding. Our method explicitly introduces reference tokens from draft-model predictions and designs an attention mask that regulates their interaction with current-step tokens, allowing dLLMs to compute valid logits for drafted tokens in a single forward pass. This restores the key verification ability provided by causal masking in AR models while preserving the parallel decoding advantages of dLLMs. The proposed method is training-free and can be flexibly integrated with other acceleration techniques such as KV cache and blockwise decoding. Experiments on SDAR-family dLLMs across four benchmarks show that our method achieves up to 7.46x higher decoding throughput while maintaining and even improving average generation quality.

Speculative decoding accelerates large language model inference by using a draft model to generate candidate tokens, which are verified by the target model in a single forward pass. Verification proceeds sequentially and discards every position from the first rejection onward, yet existing draft training relies on token-level imitation of the target with a fixed per-position weighting that reflects neither property. We introduce Verification-Aware Training (VAT), a plug-in framework that simulates verification at every training step and turns the resulting accept and reject patterns into supervision. VAT consists of two components: (i) a verification head, a lightweight jointly trained binary classifier that supervises the draft model on whether each position survives sequential verification; (ii) verification-adaptive weighting, which replaces the fixed weighting schedule by keeping full weight up to each sample's first rejection point and re-anchoring the decay to start there. VAT modifies only the training objective, so it can be layered on top of existing methods without changing the draft architecture, the target model, or the inference procedure. Applied to EAGLE-3 and DFlash on Qwen3-4B, Qwen3-8B, and LLaMA-3.1-8B, VAT improves average acceptance length by up to 11.4% and wall-clock speedup by up to 8.7%, with consistent gains across math, code, and chat benchmarks. Code will be available at https://github.com/naver-ai/vat

PipeDream is a Deep Neural Network(DNN) training system for GPUs that parallelizes computation by pipelining execution across multiple machines. Its pipeline parallel computing model avoids the slowdowns faced by data-parallel training when large models and/or limited network bandwidth induce high communication-to-computation ratios. PipeDream reduces communication by up to 95% for large DNNs relative to data-parallel training, and allows perfect overlap of communication and computation. PipeDream keeps all available GPUs productive by systematically partitioning DNN layers among them to balance work and minimize communication, versions model parameters for backward pass correctness, and schedules the forward and backward passes of different inputs in round-robin fashion to optimize "time to target accuracy". Experiments with five different DNNs on two different clusters show that PipeDream is up to 5x faster in time-to-accuracy compared to data-parallel training.

On-policy self-distillation (OPSD) trains a student on its own rollouts using a privileged teacher, but its standard objective weights all generated tokens equally, implicitly treating the privileged teacher target as equally reliable at every student-visited prefix. Existing entropy-based OPD methods relax this uniformity by modulating token-level supervision with teacher entropy, but high teacher entropy in reasoning has an ambiguous reliability meaning: it can reflect either non-viable uncertainty or benign solution diversity. To identify this phenomenon, we introduce a branch-viability diagnostic. Specifically, we record next-token alternatives from the privileged-answer teacher prompt, force each alternative after the student prompt plus its on-policy spine prefix, and test whether the resulting student-template continuation recovers the correct answer. On Qwen3-4B, we find that an oriented within-sequence position score is the strongest tested predictor of teacher-token reliability, reaching an area-under-ROC-curve (AUROC) of 0.83; local uncertainty scores are at most 0.57. Motivated by this trajectory-level structure, we propose Position-Weighted On-Policy Self-Distillation (PW-OPSD), which applies an increasing position weight while keeping the same student rollout, privileged teacher pass, and clipped forward-KL target as OPSD. In our comprehensive evaluations with different random seeds, the diagnostic-derived PW-OPSD improves AIME 2024 and AIME 2025 Avg@12 by +1.0 and +1.1 points, and a generalization evaluation on two larger-scale models from different families, DeepSeek-R1-Distill-Llama-8B and Olmo-3-7B-Think, also demonstrates consistent aggregate Avg@12 improvements. These results show that teacher-token reliability in reasoning distillation is trajectory-structured and can be utilized without additional teacher computation.

Given the generational gap in available hardware between lay practitioners and the most endowed institutions, LLMs are becoming increasingly inaccessible as they grow in size. Whilst many approaches have been proposed to compress LLMs to make their resource consumption manageable, these methods themselves tend to be resource intensive, putting them out of the reach of the very user groups they target. In this work, we explore the problem of structured pruning of LLMs using only forward passes. We seek to empower practitioners to prune models so large that their available hardware has just enough memory to run inference. We develop Bonsai, a gradient-free, perturbative pruning method capable of delivering small, fast, and accurate pruned models. We observe that Bonsai outputs pruned models that (i) outperform those generated by more expensive gradient-based structured pruning methods, and (ii) are twice as fast (with comparable accuracy) as those generated by semi-structured pruning methods requiring comparable resources as Bonsai. We also leverage Bonsai to produce a new sub-2B model using a single A6000 that yields state-of-the-art performance on 4/6 tasks on the Huggingface Open LLM leaderboard.

To enable learning on edge devices with fast convergence and low memory, we present a novel backpropagation-free optimization algorithm dubbed Target Projection Stochastic Gradient Descent (tpSGD). tpSGD generalizes direct random target projection to work with arbitrary loss functions and extends target projection for training recurrent neural networks (RNNs) in addition to feedforward networks. tpSGD uses layer-wise stochastic gradient descent (SGD) and local targets generated via random projections of the labels to train the network layer-by-layer with only forward passes. tpSGD doesn't require retaining gradients during optimization, greatly reducing memory allocation compared to SGD backpropagation (BP) methods that require multiple instances of the entire neural network weights, input/output, and intermediate results. Our method performs comparably to BP gradient-descent within 5% accuracy on relatively shallow networks of fully connected layers, convolutional layers, and recurrent layers. tpSGD also outperforms other state-of-the-art gradient-free algorithms in shallow models consisting of multi-layer perceptrons, convolutional neural networks (CNNs), and RNNs with competitive accuracy and less memory and time. We evaluate the performance of tpSGD in training deep neural networks (e.g. VGG) and extend the approach to multi-layer RNNs. These experiments highlight new research directions related to optimized layer-based adaptor training for domain-shift using tpSGD at the edge.

Conditional diffusion and flow models routinely fail to satisfy the very constraints that define their task. For instance, a depth-conditioned model often produces images whose re-extracted depth disagrees with the input, even though the forward operator--the depth predictor defining the constraint--is available during both training and inference. Existing approaches generally fall into two categories: supervised models that treat the conditioning signal as a static cue and ignore alignment information at inference, and guidance-based methods that consult it through hand-tuned linear updates, typically trading fidelity to the condition against the plausibility of the generated sample. We argue that the fundamental gap in both paradigms is that the model is never trained to utilize its own alignment error. We introduce FlowBender, a closed-loop framework that treats this error as a first-class input, training the network to learn a correction policy conditioned on inference-time feedback. At each step, an unguided look-ahead pass estimates the clean signal, a task-specific deviation is computed via the forward operator, and a refinement pass consumes this signal to produce a corrected velocity. We propose several variants of FlowBender, including a gradient-based formulation for differentiable operators and a zero-order variant for non-differentiable settings such as JPEG compression. For efficient sampling, we introduce a prior-step shortcut that enables closed-loop correction at a minimal additional computational cost. Across image-to-image translation, restoration, and 3D mesh texturing, FlowBender consistently outperforms standard supervised baselines, alignment-loss-augmented training, and state-of-the-art inference-time guidance, improving fidelity and plausibility simultaneously rather than trading them against each other. Project page: https://flow-bender.github.io/

The aim of this paper is to introduce a new learning procedure for neural networks and to demonstrate that it works well enough on a few small problems to be worth further investigation. The Forward-Forward algorithm replaces the forward and backward passes of backpropagation by two forward passes, one with positive (i.e. real) data and the other with negative data which could be generated by the network itself. Each layer has its own objective function which is simply to have high goodness for positive data and low goodness for negative data. The sum of the squared activities in a layer can be used as the goodness but there are many other possibilities, including minus the sum of the squared activities. If the positive and negative passes could be separated in time, the negative passes could be done offline, which would make the learning much simpler in the positive pass and allow video to be pipelined through the network without ever storing activities or stopping to propagate derivatives.

Backpropagation provides a generalized configuration for overcoming catastrophic forgetting. Like, SGD and Adam are commonly used for weight updates in continual learning and continual pre-training. In practice, permission to access gradient information is not always granted (the gradient ban), such as black-box APIs, hardware limitations, and non-differentiable systems. To bridge this gap, we introduce the first benchmark ZeroFlow to evaluate gradient-free optimization algorithms for overcoming forgetting. This benchmark examines a suite of forward pass methods across multiple methods, forgetting scenarios, and datasets. We find that forward passes alone are enough to overcome forgetting. Our findings reveal new optimization principles that highlight the potential of forward-pass in mitigating forgetting, managing task conflicts, and reducing memory demands, alongside novel enhancements that further mitigate forgetting with just one forward pass. This work provides essential insights and tools for advancing forward pass methods to overcome forgetting.

MeanFlow (MF) has recently been established as a framework for one-step generative modeling. However, its ``fastforward'' nature introduces key challenges in both the training objective and the guidance mechanism. First, the original MF's training target depends not only on the underlying ground-truth fields but also on the network itself. To address this issue, we recast the objective as a loss on the instantaneous velocity v, re-parameterized by a network that predicts the average velocity u. Our reformulation yields a more standard regression problem and improves the training stability. Second, the original MF fixes the classifier-free guidance scale during training, which sacrifices flexibility. We tackle this issue by formulating guidance as explicit conditioning variables, thereby retaining flexibility at test time. The diverse conditions are processed through in-context conditioning, which reduces model size and benefits performance. Overall, our improved MeanFlow (iMF) method, trained entirely from scratch, achieves 1.72 FID with a single function evaluation (1-NFE) on ImageNet 256times256. iMF substantially outperforms prior methods of this kind and closes the gap with multi-step methods while using no distillation. We hope our work will further advance fastforward generative modeling as a stand-alone paradigm.

Forward-Forward (FF) training allows each layer to learn from a local goodness criterion. In cumulative-goodness variants, however, later layers can inherit a task that earlier layers have already partially separated. We formalize this phenomenon as layer free-riding: under the softplus FF criterion, the class-discrimination gradient reaching block d decays exponentially with the positive margin accumulated by preceding blocks. We then study three local remedies -- per-block, hardness-gated, and depth-scaled -- that recover current-layer separation measures without relying on backpropagated gradients. On CIFAR-10 and CIFAR-100, these remedies dramatically improve layer-separation statistics, with 4times--45times gains in deeper layers, while changing accuracy by less than one percentage point for non-degenerate training procedures. Tiny ImageNet provides a tougher cross-dataset check for our selected block-wise configuration and reveals the same qualitative gap between layer-health diagnostics and final accuracy. Calibration experiments further show that architecture and augmentation choices have a larger effect on final accuracy than the training-rule modifications studied here. Cumulative free-riding is therefore a real and repairable optimization pathology. Nonetheless, for the FF training rules, architectures, and datasets we study, it is not the dominant factor limiting achievable accuracy.

Skills extend an LLM agent beyond its parametric knowledge, and the gain they promise rests on picking the right one. Deployed harnesses route by preloading every skill's metadata into the context, which disperses the agent's attention and caps the library size. Retrieval pipelines move the selection out of the context, but also out of the agent's capability. We show that the frozen agent LLM already carries the routing signal in its own forward passes, and that two linear maps suffice to read it out with no skill text in the context. Gavel (Glance And Verdict from a frozen LLM) reads it in two steps. A glance projects the task's and each skill's mid-layer states through the two maps, the only parameters trained, and scores the full library against compact per-skill banks that one forward pass builds at installation. A verdict then resumes the shortlisted skills' forward passes and reads the model's own likelihood and yes/no judgment, fused with the glance as a product of experts. Trained once, Gavel transfers zero-shot to three public benchmarks and SkillTraj, our new benchmark of 372 simulated agent trajectories. On Qwen3-32B it outperforms progressive disclosure and retrieve-and-rerank pipelines that add 1.2B to 16B external parameters, by up to 13.4 points on written tasks and up to 21.9 when the need for a skill arises mid-rollout. Routing accuracy improves as the backbone does, and in a bash-agent harness the same 32B triggers the correct skill on Skill-Use more often than far larger frontier models running in Codex.

Zero-shot reinforcement learning (RL) promises to provide agents that can perform any task in an environment after an offline pre-training phase. Forward-backward (FB) representations represent remarkable progress towards this ideal, achieving 85% of the performance of task-specific agents in this setting. However, such performance is contingent on access to large and diverse datasets for pre-training, which cannot be expected for most real problems. Here, we explore how FB performance degrades when trained on small datasets that lack diversity, and mitigate it with conservatism, a well-established feature of performant offline RL algorithms. We evaluate our family of methods across various datasets, domains and tasks, reaching 150% of vanilla FB performance in aggregate. Somewhat surprisingly, conservative FB algorithms also outperform the task-specific baseline, despite lacking access to reward labels and being required to maintain policies for all tasks. Conservative FB algorithms perform no worse than FB on full datasets, and so present little downside over their predecessor. Our code is available open-source via https://enjeeneer.io/projects/conservative-world-models/.

We study how initial model selection, later handoff, and training targets affect success and cost in LLM tasks that span multiple turns. We compare several router architectures using handoff curves, which record task success and cost as the handoff step changes. Our dataset contains 34,204 complete executions of three Qwen models across BFCL, MultiWOZ, and τ-retail, providing offline supervision for routing decisions. In our primary comparison, with Qwen3.5 35B-A3B as the starting model, allowing a later handoff does not establish an improvement in utility over initial selection on BFCL or MultiWOZ, and increases cost on BFCL across a range of cost weights. Changing the supervision targets improves router performance on both our dataset and TwinRouterBench. On our dataset, replacing noisy training success curves with monotone fits raises success by 0.2 to 4.1 percentage points at the same cost across the reported operating points. On TwinRouterBench, we construct targets that describe the model capability needed for the remaining work and difficult steps ahead. Compared with training on the benchmark's per-step labels, these targets raise trajectory pass scores by 7.8 percentage points and cost savings by 6.3 percentage points on the full static bank. A live deployment of the router trained with these targets resolves 79 of 100 instances at a router cost of 0.59 US dollars per instance.

We present AdvantageFlow, a forward-process reinforcement learning (RL) algorithm for rectified flow models. The algorithm minimizes an advantage-weighted prediction loss, which maximizes reward, regularized by the rollout policy, which convexifies the objective and makes its optimization stable. Our objective can be viewed as fitting a local reward-improving target distribution. The rollout regularization arises as a variance reduction step. We evaluate AdvantageFlow empirically on text-to-image generation with Stable Diffusion 3.5 Medium and FLUX.1, and compare it to both forward- and reverse-process RL algorithms.

As machine learning has moved towards leveraging large models as priors for downstream tasks, the community has debated the right form of prior for solving reinforcement learning (RL) problems. If one were to try to prefetch as much computation as possible, they would attempt to learn a prior over the policies for some yet-to-be-determined reward function. Recent work (forward-backward (FB) representation learning) has tried this, arguing that an unsupervised representation learning procedure can enable optimal control over arbitrary rewards without further fine-tuning. However, FB's training objective and learning behavior remain mysterious. In this paper, we demystify FB by clarifying when such representations can exist, what its objective optimizes, and how it converges in practice. We draw connections with rank matching, fitted Q-evaluation, and contraction mapping. Our analysis suggests a simplified unsupervised pre-training method for RL that, instead of enabling optimal control, performs one step of policy improvement. We call our proposed method one-step forward-backward representation learning (one-step FB). Experiments in didactic settings, as well as in 10 state-based and image-based continuous control domains, demonstrate that one-step FB converges to errors 10^5 smaller and improves zero-shot performance by +24% on average. Our project website is available at https://chongyi-zheng.github.io/onestep-fb.

A model that lies while knowing the truth is the central case ELK cannot handle with behavioral evaluation alone. We ask whether such deception leaves an internal signature distinguishing it from honest error. Our key move is a control for wrongness: we contrast a sleeper agent (knows the truth, lies on trigger) against a naive liar (fine-tuned to emit the same wrong answers with no honest training). Both produce identical wrong outputs; any difference is about knowledge conflict, not incorrectness. We find deceptive forward passes carry a conflict signature - 2.1-2.3x higher residual rank than naive-liar passes on the same wrong answer - strong enough to identify which of two responses is the lie with 100% accuracy and no labels, across GPT-2 small/medium (three seeds) and three instruct models. Across Qwen2.5-1.5B/7B and Phi-3-mini, instructed deception raises residual rank on every tested fact (18/18, 40/40, 34/34); on Phi-3, lies separate perfectly from both honest answers and hallucinations (AUC 1.0, Wilcoxon p~6e-11). The signature survives strategic self-constructed deception (model invents its own lie, AUC 1.0), active concealment attempts (AUC 1.0), and length-controlled replication (20/20, AUC 1.0, p~1e-6). Using basis-free relative representations, a probe trained on one model family detects deception in two other families zero-shot (mean AUC 0.933), surviving simultaneous architecture and format change (AUC 0.821), and transfers across five languages (AUC 1.000, length-controlled). The signature is read-only: detectable but not injectable (0/8 both directions). Honest limitations and six negative experiments are documented in full.

We present a target-aware video diffusion model that generates videos from an input image in which an actor interacts with a specified target while performing a desired action. The target is defined by a segmentation mask and the desired action is described via a text prompt. Unlike existing controllable image-to-video diffusion models that often rely on dense structural or motion cues to guide the actor's movements toward the target, our target-aware model requires only a simple mask to indicate the target, leveraging the generalization capabilities of pretrained models to produce plausible actions. This makes our method particularly effective for human-object interaction (HOI) scenarios, where providing precise action guidance is challenging, and further enables the use of video diffusion models for high-level action planning in applications such as robotics. We build our target-aware model by extending a baseline model to incorporate the target mask as an additional input. To enforce target awareness, we introduce a special token that encodes the target's spatial information within the text prompt. We then fine-tune the model with our curated dataset using a novel cross-attention loss that aligns the cross-attention maps associated with this token with the input target mask. To further improve performance, we selectively apply this loss to the most semantically relevant transformer blocks and attention regions. Experimental results show that our target-aware model outperforms existing solutions in generating videos where actors interact accurately with the specified targets. We further demonstrate its efficacy in two downstream applications: video content creation and zero-shot 3D HOI motion synthesis.

Learning image classification and image generation using the same set of network parameters is a challenging problem. Recent advanced approaches perform well in one task often exhibit poor performance in the other. This work introduces an energy-based classifier and generator, namely EGC, which can achieve superior performance in both tasks using a single neural network. Unlike a conventional classifier that outputs a label given an image (i.e., a conditional distribution p(y|x)), the forward pass in EGC is a classifier that outputs a joint distribution p(x,y), enabling an image generator in its backward pass by marginalizing out the label y. This is done by estimating the energy and classification probability given a noisy image in the forward pass, while denoising it using the score function estimated in the backward pass. EGC achieves competitive generation results compared with state-of-the-art approaches on ImageNet-1k, CelebA-HQ and LSUN Church, while achieving superior classification accuracy and robustness against adversarial attacks on CIFAR-10. This work represents the first successful attempt to simultaneously excel in both tasks using a single set of network parameters. We believe that EGC bridges the gap between discriminative and generative learning.

Reward post-training of flow models either reweights the model's own samples under a KL penalty or a frozen reference, often for thousands of updates, or backpropagates the reward and moves every sample without checking that the move is worth its size. We introduce MEND, a reinforcement learning method built on proximal velocity matching. MEND caps rewards within each prompt group, so samples that already score well receive no move. Below the cap, it proposes moves along the reward gradient and accepts one only when its capped reward gain exceeds a quadratic displacement price. The model then regresses onto the resulting velocity targets, with no KL term, frozen reference model, or advantage weights. In 100 updates, MEND outperforms Flow-GRPO (about 4k updates) on five of six evaluators at the same distance to base-model images. Under an equal-budget protocol, it surpasses ReFL and DiffusionNFT at every evaluated update across four training rewards, reaching PickScore 24.03 versus 23.92 and 23.43, respectively. A 300-update three-reward run also surpasses the five-reward DiffusionNFT model on all three rewards it trains on. MEND is general and easy to adopt: it applies to any flow backbone with a differentiable reward.