Daily Papers

Large language models (LLMs) increasingly act as research agents, yet their ability to track shifts in research attention is difficult to evaluate because reviews and research ideas lack uniquely verifiable outcomes. We introduce Research Attention Prediction (RAP), a rolling benchmark covering 278 AI/ML fields and 1,390 episodes. At each cut-off, an LLM agent searches a temporally restricted arXiv corpus and predicts the next six months' paper shares across eight frozen research directions. Search generally helps, but all four diagnostic models perform worse than an exact-count exponentially weighted moving average (EWMA) baseline in compositional accuracy. We identify two linked bottlenecks. Under cumulative-history access, State carry-forward outperforms direct Forecast for all four diagnostic models; frozen-evidence replay links a shared component of this reversal to Forecast-oriented policies retrieving a smaller share of recent evidence. Even with exact historical activity, future-specific updating remains limited, with only GPT-5.5 plus reopened Search slightly surpassing EWMA. Fine-tuning on realised outcomes improves Qwen3-4B's forecast Spearman correlation by 0.105 on held-out fields at later origins, with gains also on change-rich episodes.

Underwater robots combine complementary sensors whose reliability changes abruptly with water visibility, viewpoint, and vehicle motion. We introduce AquaJEPA, an action-conditioned joint-embedding predictive model that fuses an RGB camera, forward-looking sonar, and proprioception with explicit sensor validity. It predicts a future latent target conditioned on eight-thruster commands and supplies velocity and sonar-profile predictions to a shared receding-horizon planner. We study the method in Stonefish against reactive, state-only, ordinary multimodal, supervised dynamics, and recurrent world-model baselines. We further isolate the EMA target, action margin, masks, and modality dropout. A preregistered 120-environment replication comprises five independent replicates of a grid crossing three unseen obstacle maps, four water-visibility coefficients, and nominal versus shifted dynamics, while intermittently removing DVL observations. In 120 fresh paired environments with scheduled DVL loss, AquaJEPA reaches 74 goals, versus 68 for both state-only and the recurrent world model, and attains the lowest mean final error (0.906 m). Paired final-error reductions relative to ordinary multimodal prediction, supervised dynamics, and the recurrent world model are 0.273 m (95% CI: 0.190-0.356), 0.364 m (0.260-0.468), and 0.106 m (0.025-0.187), respectively. AquaJEPA therefore achieves the best aggregate closed-loop performance and significantly outperforms three action-conditioned predictive baselines in paired final error; its advantage over state-only remains statistically unresolved.

Text-to-image models increasingly generate readable Chinese text that still contains local rendering defects, such as a character with an extra or missing stroke or a malformed component. Such errors are invisible to OCR and vision-language models, which are trained for recognition and are therefore invariant to the very structural deviations that define a rendering error. We formalize text rendering verification as a target-conditioned problem: given a target character and an image crop, decide whether the crop is a correct rendering of that character. Our verifier TEXTVERIFIER feeds the text tower a character's Ideographic Description Sequence (IDS) rather than a single-character symbol, and is trained on 12.7M crop-IDS pairs plus label-free "same-character, different-quality" hard pairs sampled from the training trajectory of a text-region inpainting model. To evaluate this ability we build TEXTRENDERBENCH-ZH, the first per-character benchmark for generated Chinese text, annotating position, identity, and correctness for 7,358 characters. TEXTVERIFIER reaches an F1 of 0.844, far above OCR confidence (0.526), a general VLM (0.329), and TextPecker (0.590). Used as a per-character reward for Flow-GRPO post-training, it further reduces rendering errors, showing that its score can both detect and correct errors.

Mobile manipulation requires robots to identify Floor Affordance (FloAff) that maximizes downstream manipulation success rather than merely ensuring navigation feasibility. FloAff prediction is a target-conditioned local spatial reasoning problem, yet existing methods suffer from representation ambiguity caused by irrelevant spatial context and arbitrary object orientations, while entangling shared and task-specific knowledge across heterogeneous manipulation skills. To address these challenges, we propose a unified framework for FloAff prediction from egocentric multimodal perception, consisting of canonical representation learning and progressive affordance prior learning. Specifically, we introduce a Canonical Floor Affordance Representation (CFAR), which learns canonical interaction geometry by preserving affordance-relevant local structure while eliminating nuisance spatial variations unrelated to robot base placement. We further propose Progressive Floor Affordance Learning (PFAL), which learns transferable FloAff priors from a foundation manipulation task and progressively adapts them to heterogeneous downstream manipulation skills. To facilitate systematic evaluation, we establish the first cross-scene, multi-view FloAff-Kitchen benchmark covering diverse manipulation skills, scene layouts, furniture styles, and viewpoints. Extensive experiments on three benchmark settings demonstrate that our method consistently outperforms strong baselines, while ablation studies validate the contribution of each proposed component. Project page: https://csu-hero-lab.github.io/FloAff-Kitchen_Web/

D-peptide binders targeting L-proteins have promising therapeutic potential. Despite rapid advances in machine learning-based target-conditioned peptide design, generating D-peptide binders remains largely unexplored. In this work, we show that by injecting axial features to E(3)-equivariant (polar) vector features, it is feasible to achieve cross-chirality generalization from homo-chiral (L--L) training data to hetero-chiral (D--L) design tasks. By implementing this method within a latent diffusion model, we achieved D-peptide binder design that not only outperforms existing tools in in silico benchmarks, but also demonstrates efficacy in wet-lab validation. To our knowledge, our approach represents the first wet-lab validated generative AI for the de novo design of D-peptide binders, offering new perspectives on handling chirality in protein design. Codes are available at https://github.com/YZY010418/PepMirror

Artificial intelligence has advanced scientific discovery, but most AI4Science systems remain fragmented tools that rely on humans to coordinate problem formulation, literature grounding, model use, simulation, validation, and knowledge reuse. This paper presents SCION (Scientific Collaborative Innovation with Agentic Organizational Nexus), an agentic scientific operating system that acts as an organizational nexus. Through a Science Agent serving as a Meta-Harness, SCION connects scientific tasks, tools, agents, artifacts, and memory, transforming research into an executable, auditable, and reusable operational process. At its core is the Research Execution Plan (REP), which compiles high-level scientific intent into staged objectives, dependencies, verification checkpoints, tool requirements, expected artifacts, and fallback conditions. SCION further integrates hierarchical multi-agent execution, profile-driven specialization, selective context construction, governed delegation, and layered epistemic memory to support long-horizon scientific work. We formulate discovery under SCION as Target-conditioned Inverse Search and extend it to hidden-target settings through batch active search under finite experimental budgets. Applications in materials analysis, molecule design, and protein or antibody screening, together with experiments on scientific reading, idea generation, molecule generation, and antibody screening, show that SCION outperforms existing autonomous research-agent baselines, especially in decomposition, verification, refinement, and memory reuse. Overall, SCION shifts AI from isolated tools toward a coordinated operational layer for traceable and reusable scientific innovation.

Large language models (LLMs) have shown remarkable potential as human-like autonomous language agents to interact with real-world environments, especially for graphical user interface (GUI) automation. However, those GUI agents require comprehensive cognition ability including exhaustive perception and reliable action response. We propose Comprehensive Cognitive LLM Agent, CoCo-Agent, with two novel approaches, comprehensive environment perception (CEP) and conditional action prediction (CAP), to systematically improve the GUI automation performance. First, CEP facilitates the GUI perception through different aspects and granularity, including screenshots and complementary detailed layouts for the visual channel and historical actions for the textual channel. Second, CAP decomposes the action prediction into sub-problems: action type prediction and action target conditioned on the action type. With our technical design, our agent achieves new state-of-the-art performance on AITW and META-GUI benchmarks, showing promising abilities in realistic scenarios. Code is available at https://github.com/xbmxb/AAgent.

Graphical User Interface (GUI) grounding is commonly framed as a coordinate prediction task -- given a natural language instruction, generate on-screen coordinates for actions such as clicks and keystrokes. However, recent Vision Language Models (VLMs) often fail to predict accurate numeric coordinates when processing high-resolution GUI images with complex layouts. To address this issue, we reframe GUI grounding as an interactive search task, where the VLM generates actions to move a cursor in the GUI to locate UI elements. At each step, the model determines the target object, evaluates the spatial relations between the cursor and the target, and moves the cursor closer to the target conditioned on the movement history. In this interactive process, the rendered cursor provides visual feedback to help the model align its predictions with the corresponding on-screen locations. We train our GUI grounding model, GUI-Cursor, using multi-step online reinforcement learning with a dense trajectory-based reward function. Our experimental results show that GUI-Cursor, based on Qwen2.5-VL-7B, improves the GUI grounding accuracy and achieves state-of-the-art results on ScreenSpot-v2 (88.8% rightarrow 93.9%) and ScreenSpot-Pro (26.8% rightarrow 56.5%). Moreover, we observe that GUI-Cursor learns to solve the problem within two steps for 95\% of instances and can adaptively conduct more steps on more difficult examples.

Bimanual dexterous tool use remains challenging for robots due to high-dimensional hand configurations and complex hand-tool-object dynamics and contact. Most existing control policies depend on future configuration references provided from demonstrations, while future action-conditioned world models require slow online planning over high-dimensional action sequences. A significant challenge is generating a dynamically consistent future reference trajectory without relying on privileged states from demonstrations or slow counterfactual planning. We propose DexFuture, a hierarchical system that couples a high-level Future-State Visuomotor Target Predictor with a low-level Target-Conditioned Structured Dexterous Policy. Conditioned on egocentric RGB, proprioceptive and geometric history, the high-level predictor constructs structured hand-tool-object visuomotor embeddings and uses a horizon-conditioned transformer to generate a multi-step future target trajectory. Then, the low-level policy tracks them with a target-conditioned per-link transformer. This hierarchy decouples coarse future reference generation from fine-grained action control, and slow long-horizon semantic prediction from high-frequency execution. On OakInk2 bimanual tool-use tasks, DexFuture achieves 90% of the privileged-oracle performance, compared to 7% for a no-reference policy. DexFuture operates at 60 Hz, approximately 250 times faster than DexWM-style Cross-Entropy Method (CEM) planning with a future action-conditioned world model.

Multimodal safety moderation requires distinguishing risks arising from visual content, user intent, and assistant behavior. Existing safeguards, however, are typically trained for a single judgment target and reduce safety assessment to a binary decision. Consequently, risk becomes difficult to compare across a multimodal interaction, and ambiguous cases are obscured. We introduce SafeAtlas-VL, a dataset of 1.5M training instances that places image-, request-, and response-level judgments on a five-level ordered scale. We curate a broad collection of safety-relevant data from both real-world and synthetic sources and apply a disagreement-aware annotation procedure. The resulting dataset spans 15 harm categories and 55 fine-grained subcategories, covering a broad range of multimodal safety scenarios. We also construct SafeAtlas-Bench, a held-out set of 5,000 instances for evaluating five-level predictions and continuous risk scores. Upon this dataset, we train the SafeAtlas Guard series of models via target-conditioned tuning for multimodal safety detection. Our models not only perform five-way classification of safety levels but also map safety to continuous scores through a soft cumulative ordinal head. Experimental results demonstrate that guard models trained on our dataset exhibit strong generalization: even without using the training sets of other benchmarks, they achieve competitive performance on the corresponding test sets. Notably, our 8B model attains the overall best performance, outperforming the previous SOTA by approximately 4% in F1 score. Code, data, and models are released to support further research. Warning: this paper contains example data that may be offensive, harmful, graphic, or disturbing.

Generative models for structure-based drug design are often limited to a specific modality, restricting their broader applicability. To address this challenge, we introduce FuncBind, a framework based on computer vision to generate target-conditioned, all-atom molecules across atomic systems. FuncBind uses neural fields to represent molecules as continuous atomic densities and employs score-based generative models with modern architectures adapted from the computer vision literature. This modality-agnostic representation allows a single unified model to be trained on diverse atomic systems, from small to large molecules, and handle variable atom/residue counts, including non-canonical amino acids. FuncBind achieves competitive in silico performance in generating small molecules, macrocyclic peptides, and antibody complementarity-determining region loops, conditioned on target structures. FuncBind also generated in vitro novel antibody binders via de novo redesign of the complementarity-determining region H3 loop of two chosen co-crystal structures. As a final contribution, we introduce a new dataset and benchmark for structure-conditioned macrocyclic peptide generation. The code is available at https://github.com/prescient-design/funcbind.

Molecular generation is a central challenge in drug discovery, requiring models that explore vast chemical space while satisfying diverse design constraints. We present Molexar, a unified multimodal molecular foundation model built on Fragment-SELFIES, a robust, fragment-aware molecular language with validity-preserving decoding and explicit fragment structure. A pretrained autoregressive decoder learns the Fragment-SELFIES syntax and molecular distribution; supervised fine-tuning (SFT) then trains the same decoder on condition-molecule pairs spanning scalar molecular properties, pharmacophore fingerprints, protein sequences, and binding pockets, injecting each condition by in-place replacement of value-token embeddings so that all generation modes share one autoregressive path. Molexar achieves strong efficiency at a small parameter count while matching or exceeding larger models. The pretrained model reaches 100% validity and high drug-likeness in unconditional and fragment-constrained generation; the SFT model follows single- and multi-property instructions and remains competitive on target-conditioned generation on the CrossDocked2020 test set. On MolGenBench, Molexar further generates molecules with favorable safety and potency. These results establish Molexar as a practical unified foundation for computational chemistry and drug-design workflows.

Target proteins that lack accessible binding pockets and conformational stability have posed increasing challenges for drug development. Induced proximity strategies, such as PROTACs and molecular glues, have thus gained attention as pharmacological alternatives, but still require small molecule docking at binding pockets for targeted protein degradation (TPD). The computational design of protein-based binders presents unique opportunities to access undruggable targets, but have often relied on stable 3D structures or predictions for effective binder generation. Recently, we have leveraged the expressive latent spaces of protein language models (pLMs) for the prioritization of peptide binders from sequence alone, which we have then fused to E3 ubiquitin ligase domains, creating a CRISPR-analogous TPD system for target proteins. However, our methods rely on training discriminator models for ranking heuristically or unconditionally-derived guide peptides for their target binding capability. In this work, we introduce PepMLM, a purely target sequence-conditioned de novo generator of linear peptide binders. By employing a novel masking strategy that uniquely positions cognate peptide sequences at the terminus of target protein sequences, PepMLM tasks the state-of-the-art ESM-2 pLM to fully reconstruct the binder region, achieving low perplexities matching or improving upon previously-validated peptide-protein sequence pairs. After successful in silico benchmarking with AlphaFold-Multimer, we experimentally verify PepMLM's efficacy via fusion of model-derived peptides to E3 ubiquitin ligase domains, demonstrating endogenous degradation of target substrates in cellular models. In total, PepMLM enables the generative design of candidate binders to any target protein, without the requirement of target structure, empowering downstream programmable proteome editing applications.

Whole-body humanoid manipulation of bulky, deformable, and shared-load objects requires distributed contact sensing and explicit force regulation, yet most imitation policies treat contact force only implicitly. On the other hand, different demonstration sources provide complementary modalities with inherent trade-offs: human demonstrations capture natural contact forces but not robot-executable actions, while teleoperation directly records robot actions but with less natural force regulation. This paper presents WT-UMI, a wearable whole-body tactile interface worn by human operators or mounted on humanoids, providing accurate observations of tactile images, contact forces, and end-effector poses across both human demonstration and humanoid teleoperation modes. We introduce a force-conditioned target-pose correction module that converts measured human poses into contact-aware robot targets by learning corrections from teleoperation data. To leverage the natural force interaction in human data, we propose a force-supervised planner that predicts end-effector pose chunks and contact-force trajectories. The predicted contact force serves as the reference for a tactile-based admittance controller. Across five contact-rich tasks spanning deformable objects, bulky rigid objects, and human--humanoid collaboration, WT-UMI improves success rate and reduces contact-position tracking error over four policy baselines. Our project page is available at https://wt-umi.github.io/WTUMI/.

The principal task in supervised neural machine translation (NMT) is to learn to generate target sentences conditioned on the source inputs from a set of parallel sentence pairs, and thus produce a model capable of generalizing to unseen instances. However, it is commonly observed that the generalization performance of the model is highly influenced by the amount of parallel data used in training. Although data augmentation is widely used to enrich the training data, conventional methods with discrete manipulations fail to generate diverse and faithful training samples. In this paper, we present a novel data augmentation paradigm termed Continuous Semantic Augmentation (CsaNMT), which augments each training instance with an adjacency semantic region that could cover adequate variants of literal expression under the same meaning. We conduct extensive experiments on both rich-resource and low-resource settings involving various language pairs, including WMT14 English-{German,French}, NIST Chinese-English and multiple low-resource IWSLT translation tasks. The provided empirical evidences show that CsaNMT sets a new level of performance among existing augmentation techniques, improving on the state-of-the-art by a large margin. The core codes are contained in Appendix E.

Feed-forward view synthesis models predict a novel view in a single pass with minimal 3D inductive bias. Existing works encode cameras as Plücker ray maps, which tie predictions to the arbitrary world coordinate gauge and make them sensitive to small camera transformations, thereby undermining geometric consistency. In this paper, we ask what inputs best condition a model for robust and consistent view synthesis. We propose projective conditioning, which replaces raw camera parameters with a target-view projective cue that provides a stable 2D input. This reframes the task from a brittle geometric regression problem in ray space to a well-conditioned target-view image-to-image translation problem. Additionally, we introduce a masked autoencoding pretraining strategy tailored to this cue, enabling the use of large-scale uncalibrated data for pretraining. Our method shows improved fidelity and stronger cross-view consistency compared to ray-conditioned baselines on our view-consistency benchmark. It also achieves state-of-the-art quality on standard novel view synthesis benchmarks.

Membership inference attacks serves as useful tool for fair use of language models, such as detecting potential copyright infringement and auditing data leakage. However, many current state-of-the-art attacks require access to models' hidden states or probability distribution, which prevents investigation into more widely-used, API-access only models like GPT-4. In this work, we introduce N-Gram Coverage Attack, a membership inference attack that relies solely on text outputs from the target model, enabling attacks on completely black-box models. We leverage the observation that models are more likely to memorize and subsequently generate text patterns that were commonly observed in their training data. Specifically, to make a prediction on a candidate member, N-Gram Coverage Attack first obtains multiple model generations conditioned on a prefix of the candidate. It then uses n-gram overlap metrics to compute and aggregate the similarities of these outputs with the ground truth suffix; high similarities indicate likely membership. We first demonstrate on a diverse set of existing benchmarks that N-Gram Coverage Attack outperforms other black-box methods while also impressively achieving comparable or even better performance to state-of-the-art white-box attacks - despite having access to only text outputs. Interestingly, we find that the success rate of our method scales with the attack compute budget - as we increase the number of sequences generated from the target model conditioned on the prefix, attack performance tends to improve. Having verified the accuracy of our method, we use it to investigate previously unstudied closed OpenAI models on multiple domains. We find that more recent models, such as GPT-4o, exhibit increased robustness to membership inference, suggesting an evolving trend toward improved privacy protections.

Recent breakthroughs in large language models (LLMs) have fundamentally shifted recommender systems from discriminative to generative paradigms, where user behavior modeling is achieved by generating target items conditioned on historical interactions. Yet current generative recommenders still suffer from two core limitations: the lack of high-quality negative modeling and the reliance on implicit rewards. Reinforcement learning with verifiable rewards (RLVR) offers a natural solution by enabling on-policy sampling of harder negatives and grounding optimization in explicit reward signals. However, applying RLVR to generative recommenders remains non-trivial. Its unique generation space often leads to invalid or repetitive items that undermine sampling efficiency, and ranking supervision is sparse since most items receive identical zero rewards. To address these challenges, we propose Reinforced Preference Optimization for Recommendation (ReRe), a reinforcement-based paradigm tailored to LLM-based recommenders, an important direction in generative recommendation. ReRe incorporates constrained beam search to improve sampling efficiency and diversify hard negatives, while augmenting rule-based accuracy rewards with auxiliary ranking rewards for finer-grained supervision. Extensive experiments on three real-world datasets demonstrate that ReRe consistently outperforms both traditional and LLM-based recommenders in ranking performance. Further analysis shows that ReRe not only enhances performance across both base and SFT-initialized models but also generalizes robustly across different backbone families and scales. Beyond empirical gains, we systematically investigate the design space of RLVR in recommendation across generation, sampling strategy, reward modeling, and optimization algorithm, offering insights for future research.

Voice style conversion aims to transform an input utterance to match a target speaker's timbre, accent, and emotion, with a central challenge being the disentanglement of linguistic content from style. While prior work has explored this problem, conversion quality remains limited, and real-time voice style conversion has not been addressed. We propose StyleStream, the first streamable zero-shot voice style conversion system that achieves state-of-the-art performance. StyleStream consists of two components: a Destylizer, which removes style attributes while preserving linguistic content, and a Stylizer, a diffusion transformer (DiT) that reintroduces target style conditioned on reference speech. Robust content-style disentanglement is enforced through text supervision and a highly constrained information bottleneck. This design enables a fully non-autoregressive architecture, achieving real-time voice style conversion with an end-to-end latency of 1 second. Samples and real-time demo: https://berkeley-speech-group.github.io/StyleStream/.

We build on the Visual Autoregressive Modeling (VAR) framework and formulate style transfer as conditional discrete sequence modeling in a learned latent space. Images are decomposed into multi-scale representations and tokenized into discrete codes by a VQ-VAE; a transformer then autoregressively models the distribution of target tokens conditioned on style and content tokens. To inject style and content information, we introduce a blended cross-attention mechanism in which the evolving target representation attends to its own history, while style and content features act as queries that decide which aspects of this history to emphasize. A scale-dependent blending coefficient controls the relative influence of style and content at each stage, encouraging the synthesized representation to align with both the content structure and the style texture without breaking the autoregressive continuity of VAR. We train StyleVAR in two stages from a pretrained VAR checkpoint: supervised fine-tuning on a large triplet dataset of content--style--target images, followed by reinforcement fine-tuning with Group Relative Policy Optimization (GRPO) against a DreamSim-based perceptual reward, with per-action normalization weighting to rebalance credit across VAR's multi-scale hierarchy. Across three benchmarks spanning in-, near-, and out-of-distribution regimes, StyleVAR consistently outperforms an AdaIN baseline on Style Loss, Content Loss, LPIPS, SSIM, DreamSim, and CLIP similarity, and the GRPO stage yields further gains over the SFT checkpoint, most notably on the reward-aligned perceptual metrics. Qualitatively, the method transfers texture while maintaining semantic structure, especially for landscapes and architectural scenes, while a generalization gap on internet images and difficulty with human faces highlight the need for better content diversity and stronger structural priors.

We investigate whether the Feed-Forward Network (FFN) sublayer in a decoder-only transformer can be replaced by an explicit learned memory graph while preserving the surrounding autoregressive architecture. The proposed Graph Memory Transformer (GMT) keeps causal self-attention intact, but replaces the usual per-token FFN transformation with a memory cell that routes token representations over a learned bank of centroids connected by a learned directed transition matrix. In the base GMT v7 instantiation studied here, each of 16 transformer blocks contains 128 centroids, a 128 * 128 edge matrix, gravitational source routing, token-conditioned target selection, and a gated displacement readout. The cell therefore returns movement from an estimated source memory state toward a target memory state, rather than a retrieved value. The resulting model is a fully decoder-only language model with 82.2M trainable parameters and no dense FFN sublayers, compared with a 103.0M-parameter dense GPT-style baseline used in the evaluation. The base v7 model trains stably and exposes centroid usage, transition structure, and source-to-target movement as directly inspectable quantities of the forward computation. It remains behind the larger dense baseline in validation loss and perplexity (3.5995/36.58 vs. 3.2903/26.85), while showing close zero-shot benchmark behavior under the evaluated setting. These results are not intended as a state-of-the-art claim; they support the viability and structural interpretability of replacing dense within-token transformation with graph-mediated memory navigation. Broader scaling, optimized kernels, and more extensive benchmark evaluation are left for subsequent work.

Speech-to-text (S2T) systems for recognition (ASR) and translation (S2TT) typically generate discrete text tokens. In contrast, continuous-target language modelling performs generation in a continuous space, yet its potential for S2T remains unexplored. To bridge this gap, we propose ELF-S2T, an audio-conditioned continuous-target generative model for S2T. Built upon the pre-trained Embedded Language Flows (ELF) backbone, ELF-S2T processes speech via a frozen Whisper encoder and a single linear projector, prepending the resulting audio condition to the noisy text latent for in-context, flow-matching denoising. To prevent the model from over-relying on its pre-trained text context, we introduce audio forcing during training, and further amplify the audio condition via classifier-free guidance at inference. Experiments on LibriSpeech and CoVoST2 show that ELF-S2T achieves competitive ASR and S2TT performance. Crucially, our error analysis reveals that, although ASR and S2TT errors look very different on the surface, both stem from the same underlying cause, a close distance confusion in the continuous latent space. This finding naturally aligns with the continuous representation generation paradigm, indicating a common semantic mapping process beneath recognition and translation. Our code and pretrained models are publicly available at https://github.com/Sslnon/ELF-S2T.

Learning neural subset selection tasks, such as compound selection in AI-aided drug discovery, have become increasingly pivotal across diverse applications. The existing methodologies in the field primarily concentrate on constructing models that capture the relationship between utility function values and subsets within their respective supersets. However, these approaches tend to overlook the valuable information contained within the superset when utilizing neural networks to model set functions. In this work, we address this oversight by adopting a probabilistic perspective. Our theoretical findings demonstrate that when the target value is conditioned on both the input set and subset, it is essential to incorporate an invariant sufficient statistic of the superset into the subset of interest for effective learning. This ensures that the output value remains invariant to permutations of the subset and its corresponding superset, enabling identification of the specific superset from which the subset originated. Motivated by these insights, we propose a simple yet effective information aggregation module designed to merge the representations of subsets and supersets from a permutation invariance perspective. Comprehensive empirical evaluations across diverse tasks and datasets validate the enhanced efficacy of our approach over conventional methods, underscoring the practicality and potency of our proposed strategies in real-world contexts.

We present a generative framework for inverse design of five-layer transmissive Huygens' metasurfaces (HMSs), addressing a longstanding challenge in achieving full-phase, high-efficiency unit cell designs with minimal full-wave simulations. The key to achieving this is our reliance on the field-based semianalytical (SA) scheme developed in Part I of this paper, which allows rapid and highly effective synthesis of such multilayer composites, however with limited accuracy. To overcome the prohibitive data demands of traditional pipelines, we employ Mamba, a selective state space model well suited for long-range sequence modeling as the backbone of our learning framework. A bidirectional Mamba (Bi-Mamba) forward surrogate is first trained on SA-generated data and subsequently fine-tuned with full-wave CST samples. An ablation over a 1080-sample CST pool shows that as few as 270 full-wave calibration samples suffice to reach near-CST-level agreement at a fraction of the simulation cost. An autoregressive Mamba inverse generator is subsequently trained on surrogate-augmented data, treating unit-cell synthesis as a sequential generation task. The resulting one-to-many generative model produces diverse unit cell geometries conditioned on target scattering responses. It achieves CST-validated designs with field transmission magnitude 0.9 across the full 0-2π phase range at 20 GHz. Moreover, a CST-calibrated surrogate trained to accurately predict frequency responses (18-22 GHz) enables functional post-selection of inverse generated designs. Together, the hybrid SA-generative methodology in this two-part compilation establishes a scalable and data-efficient solution for multilayer HMS synthesis, with natural extensions toward broadband, oblique-incidence, and higher-dimensional electromagnetic inverse-design problems.

As a key component of talking face generation, lip movements generation determines the naturalness and coherence of the generated talking face video. Prior literature mainly focuses on speech-to-lip generation while there is a paucity in text-to-lip (T2L) generation. T2L is a challenging task and existing end-to-end works depend on the attention mechanism and autoregressive (AR) decoding manner. However, the AR decoding manner generates current lip frame conditioned on frames generated previously, which inherently hinders the inference speed, and also has a detrimental effect on the quality of generated lip frames due to error propagation. This encourages the research of parallel T2L generation. In this work, we propose a parallel decoding model for fast and high-fidelity text-to-lip generation (ParaLip). Specifically, we predict the duration of the encoded linguistic features and model the target lip frames conditioned on the encoded linguistic features with their duration in a non-autoregressive manner. Furthermore, we incorporate the structural similarity index loss and adversarial learning to improve perceptual quality of generated lip frames and alleviate the blurry prediction problem. Extensive experiments conducted on GRID and TCD-TIMIT datasets demonstrate the superiority of proposed methods. Video samples are available via https://paralip.github.io/.

Multi-image spatial reasoning remains challenging for current multimodal large language models (MLLMs). While single-view perception is inherently 2D, reasoning over multiple views requires building a coherent scene understanding across viewpoints. In particular, we study perspective taking, where a model must build a coherent 3D understanding from multi-view observations and use it to reason from a new, language-specified viewpoint. We introduce CAMCUE, a pose-aware multi-image framework that uses camera pose as an explicit geometric anchor for cross-view fusion and novel-view reasoning. CAMCUE injects per-view pose into visual tokens, grounds natural-language viewpoint descriptions to a target camera pose, and synthesizes a pose-conditioned imagined target view to support answering. To support this setting, we curate CAMCUE-DATA with 27,668 training and 508 test instances pairing multi-view images and poses with diverse target-viewpoint descriptions and perspective-shift questions. We also include human-annotated viewpoint descriptions in the test split to evaluate generalization to human language. CAMCUE improves overall accuracy by 9.06% and predicts target poses from natural-language viewpoint descriptions with over 90% rotation accuracy within 20° and translation accuracy within a 0.5 error threshold. This direct grounding avoids expensive test-time search-and-match, reducing inference time from 256.6s to 1.45s per example and enabling fast, interactive use in real-world scenarios.

Fragment-based drug discovery has been an effective paradigm in early-stage drug development. An open challenge in this area is designing linkers between disconnected molecular fragments of interest to obtain chemically-relevant candidate drug molecules. In this work, we propose DiffLinker, an E(3)-equivariant 3D-conditional diffusion model for molecular linker design. Given a set of disconnected fragments, our model places missing atoms in between and designs a molecule incorporating all the initial fragments. Unlike previous approaches that are only able to connect pairs of molecular fragments, our method can link an arbitrary number of fragments. Additionally, the model automatically determines the number of atoms in the linker and its attachment points to the input fragments. We demonstrate that DiffLinker outperforms other methods on the standard datasets generating more diverse and synthetically-accessible molecules. Besides, we experimentally test our method in real-world applications, showing that it can successfully generate valid linkers conditioned on target protein pockets.

Vision-and-Language Navigation (VLN) requires an embodied agent to ground complex natural-language instructions into long-horizon navigation in unseen environments. While Vision-Language Models (VLMs) offer strong 2D semantic understanding, current VLN systems remain constrained by limited spatial perception, 2D-3D representation mismatch, and monocular scale ambiguity. In this paper, we propose AgentVLN, a novel and efficient embodied navigation framework that can be deployed on edge computing platforms. We formulate VLN as a Partially Observable Semi-Markov Decision Process (POSMDP) and introduce a VLM-as-Brain paradigm that decouples high-level semantic reasoning from perception and planning via a plug-and-play skill library. To resolve multi-level representation inconsistency, we design a cross-space representation mapping that projects perception-layer 3D topological waypoints into the image plane, yielding pixel-aligned visual prompts for the VLM. Building on this bridge, we integrate a context-aware self-correction and active exploration strategy to recover from occlusions and suppress error accumulation over long trajectories. To further address the spatial ambiguity of instructions in unstructured environments, we propose a Query-Driven Perceptual Chain-of-Thought (QD-PCoT) scheme, enabling the agent with the metacognitive ability to actively seek geometric depth information. Finally, we construct AgentVLN-Instruct, a large-scale instruction-tuning dataset with dynamic stage routing conditioned on target visibility. Extensive experiments show that AgentVLN consistently outperforms prior state-of-the-art methods (SOTA) on long-horizon VLN benchmarks, offering a practical paradigm for lightweight deployment of next-generation embodied navigation models. Code: https://github.com/Allenxinn/AgentVLN.

Speaker-attributed automatic speech recognition (ASR) in multi-speaker environments remains a significant challenge, particularly when systems conditioned on speaker embeddings fail to generalize to unseen speakers. In this work, we propose Diarization-Conditioned Whisper (DiCoW), a novel approach to target-speaker ASR that leverages speaker diarization outputs as conditioning information. DiCoW extends the pre-trained Whisper model by integrating diarization labels directly, eliminating reliance on speaker embeddings and reducing the need for extensive speaker-specific training data. Our method introduces frame-level diarization-dependent transformations (FDDT) and query-key biasing (QKb) techniques to refine the model's focus on target speakers while effectively handling overlapping speech. By leveraging diarization outputs as conditioning signals, DiCoW simplifies the workflow for multi-speaker ASR, improves generalization to unseen speakers and enables more reliable transcription in real-world multi-speaker recordings. Additionally, we explore the integration of a connectionist temporal classification (CTC) head to Whisper and demonstrate its ability to improve transcription efficiency through hybrid decoding. Notably, we show that our approach is not limited to Whisper; it also provides similar benefits when applied to the Branchformer model. We validate DiCoW on real-world datasets, including AMI and NOTSOFAR-1 from CHiME-8 challenge, as well as synthetic benchmarks such as Libri2Mix and LibriCSS, enabling direct comparisons with previous methods. Results demonstrate that DiCoW enhances the model's target-speaker ASR capabilities while maintaining Whisper's accuracy and robustness on single-speaker data.

Dialogue systems need to deal with the unpredictability of user intents to track dialogue state and the heterogeneity of slots to understand user preferences. In this paper we investigate the hypothesis that solving these challenges as one unified model will allow the transfer of parameter support data across the different tasks. The proposed principled model is based on a Transformer encoder, trained on multiple tasks, and leveraged by a rich input that conditions the model on the target inferences. Conditioning the Transformer encoder on multiple target inferences over the same corpus, i.e., intent and multiple slot types, allows learning richer language interactions than a single-task model would be able to. In fact, experimental results demonstrate that conditioning the model on an increasing number of dialogue inference tasks leads to improved results: on the MultiWOZ dataset, the joint intent and slot detection can be improved by 3.2\% by conditioning on intent, 10.8\% by conditioning on slot and 14.4\% by conditioning on both intent and slots. Moreover, on real conversations with Farfetch costumers, the proposed conditioned BERT can achieve high joint-goal and intent detection performance throughout a dialogue.

Learning a transport model that maps a source distribution to a target distribution is a canonical problem in machine learning, but scientific applications increasingly require models that can generalize to source and target distributions unseen during training. We introduce distribution-conditioned transport (DCT), a framework that conditions transport maps on learned embeddings of source and target distributions, enabling generalization to unseen distribution pairs. DCT also allows semi-supervised learning for distributional forecasting problems: because it learns from arbitrary distribution pairs, it can leverage distributions observed at only one condition to improve transport prediction. DCT is agnostic to the underlying transport mechanism, supporting models ranging from flow matching to distributional divergence-based models (e.g. Wasserstein, MMD). We demonstrate the practical performance benefits of DCT on synthetic benchmarks and four applications in biology: batch effect transfer in single-cell genomics, perturbation prediction from mass cytometry data, learning clonal transcriptional dynamics in hematopoiesis, and modeling T-cell receptor sequence evolution.

Film emulation reproduces the look of an analog film stock on a new digital photograph. We target its open-set form -- matching any reference film frame from a single example -- with a 3D lookup table (LUT) predicted from that reference. Real-time image enhancement predicts per-image weights over a fixed bank of 3D LUTs and blends them. We show this is a gated mixture of experts and inherits its failure: trained end-to-end against reconstruction, the gate collapses onto a single expert, so a bank of K LUTs delivers the capacity of one. An entropy term, the enhancement-setting analogue of mixture-of-experts load balancing, restores utilization and recovers about 1 dB PSNR. The deeper constraint survives: a fixed LUT basis is closed-set, freezing the achievable looks at training time. We therefore discard the basis and predict a single 3D LUT as a residual from a reference image (StyleLUTNet), trained by self-supervision on procedurally generated color transforms. The conditional design removes the gate and generalizes open-set to unseen film stocks without paired data or retraining. Around this color backbone we build Deep Analog, a film-emulation pipeline that adds histogram-based tone matching and a physics-informed optical renderer -- multi-scale grain and per-channel halation driven by parameters an inverse network regresses from the reference. On 350 self-supervised pairs the color stage reaches 22.05 dB PSNR / 0.925 SSIM and the full pipeline 21.72 dB / 0.923; the color path runs in 5.2 ms at 1080p (192 FPS) and exports a portable .cube LUT for standard editing tools. A second degeneracy in conditional LUT training -- residual-scale collapse -- shares the root cause and yields a general principle: auxiliary regularization must stay subordinate to reconstruction.

Cross-machine deployment of industrial world models requires transfer across changes in dynamics, sensing interfaces, sampling regimes, and control units. We study a schema-adaptive action-conditioned Joint-Embedding Predictive Architecture (SAAC-JEPA) for CNC dynamics, where the source machine has 17 canonical sensor channels and the target shares only 10. Evaluation uses group-disjoint source splits, source-only normalization, held-out self-supervised validation, unit audits, and a sealed target test after model locking. Across five seeds, JEPA pretraining gives no clean-source forecasting gain: scratch and pretrained-body models obtain \(RMSE=0.811\pm0.022\) and \(0.813\pm0.022\). A source-only search over 20 candidates selects a schema-consistent action-conditioned JEPA after seven-seed stability checks. On the confirmatory target pass, the locked model reaches zero-shot \(RMSE=0.546\), \(R^2=0.012\), and \(NLL=0.52\), outperforming persistence but not RevIN-equipped PatchTST and iTransformer baselines (\(0.503\) and \(0.498\)). A pre-declared paired ablation shows that RevIN in the same architecture improves RMSE to \(0.495\pm0.004\) over three seeds, but degrades target calibration (\(NLL=20.6\)) on stationary context windows. A pre-lock adaptation sweep further reduces RMSE to \(0.520\) with limited target support. These results show that source-domain forecasting accuracy alone is insufficient to assess industrial predictive representations, and that cross-machine adaptation under partial sensor overlap is a distinct evaluation axis.

We introduce target-speaker unlearning ASR (TSU-ASR) task in a fully end-to-end framework for multi-speaker ASR and diarization. Given a multi-speaker utterance and a set of opt-out speakers who do not wish to have their speech transcribed, the task requires an ASR system to transcribe all speakers except the opt-out ones, while still indicating when those speakers are active. As a first step towards tackling this task, we introduce a novel, light-weight Enrollment-Conditioned Gating (ECG) module attachable to a frozen dual-stream speech LLM that enables ASR for new opt-out speakers dynamically during inference, even those who were not seen during initial ECG training phase. Our experiments on both AMI (English) and AliMeeting (Mandarin) datasets show that speech transcription accuracy for corresponding opt-out words or characters falls from 72.3% to 48.2% and from 73.6% to 27.3%, respectively, while retained speakers' transcription error rates maintain more or less the same. Our approach provides a practical solution for modern video conferencing platforms, allowing speakers to dynamically opt-out from automated AI transcriptions without forcefully leaving the meeting sessions, enabling a privacy-preserving interface for potentially millions of online meetings daily.

Domain Adaptation (DA) attempts to transfer knowledge learned in the labeled source domain to the unlabeled but related target domain without requiring large amounts of target supervision. Recent advances in DA mainly proceed by aligning the source and target distributions. Despite the significant success, the adaptation performance still degrades accordingly when the source and target domains encounter a large distribution discrepancy. We consider this limitation may attribute to the insufficient exploration of domain-specialized features because most studies merely concentrate on domain-general feature learning in task-specific layers and integrate totally-shared convolutional networks (convnets) to generate common features for both domains. In this paper, we relax the completely-shared convnets assumption adopted by previous DA methods and propose Domain Conditioned Adaptation Network (DCAN), which introduces domain conditioned channel attention module with a multi-path structure to separately excite channel activation for each domain. Such a partially-shared convnets module allows domain-specialized features in low-level to be explored appropriately. Further, given the knowledge transferability varying along with convolutional layers, we develop Generalized Domain Conditioned Adaptation Network (GDCAN) to automatically determine whether domain channel activations should be separately modeled in each attention module. Afterward, the critical domain-specialized knowledge could be adaptively extracted according to the domain statistic gaps. As far as we know, this is the first work to explore the domain-wise convolutional channel activations separately for deep DA networks. Additionally, to effectively match high-level feature distributions across domains, we consider deploying feature adaptation blocks after task-specific layers, which can explicitly mitigate the domain discrepancy.

Generative models have recently shown great promise for accelerating the design and discovery of new functional materials. Conditional generation enhances this capacity by allowing inverse design, where specific desired properties can be requested during the generation process. However, conditioning of transformer-based approaches, in particular, is constrained by discrete tokenisation schemes and the risk of catastrophic forgetting during fine-tuning. This work introduces CrystaLLM-π (property injection), a conditional autoregressive framework that integrates continuous property representations directly into the transformer's attention mechanism. Two architectures, Property-Key-Value (PKV) Prefix attention and PKV Residual attention, are presented. These methods bypass inefficient sequence-level tokenisation and preserve foundational knowledge from unsupervised pre-training on Crystallographic Information Files (CIFs) as textual input. We establish the efficacy of these mechanisms through systematic robustness studies and evaluate the framework's versatility across two distinct tasks. First, for structure recovery, the model processes high-dimensional, heterogeneous X-ray diffraction patterns, achieving structural accuracy competitive with specialised models and demonstrating applications to experimental structure recovery and polymorph differentiation. Second, for materials discovery, the model is fine-tuned on a specialised photovoltaic dataset to generate novel, stable candidates validated by Density Functional Theory (DFT). It implicitly learns to target optimal band gap regions for high photovoltaic efficiency, demonstrating a capability to map complex structure-property relationships. CrystaLLM-π provides a unified, flexible, and computationally efficient framework for inverse materials design.

In this paper, we present a novel system that separates the voice of a target speaker from multi-speaker signals, by making use of a reference signal from the target speaker. We achieve this by training two separate neural networks: (1) A speaker recognition network that produces speaker-discriminative embeddings; (2) A spectrogram masking network that takes both noisy spectrogram and speaker embedding as input, and produces a mask. Our system significantly reduces the speech recognition WER on multi-speaker signals, with minimal WER degradation on single-speaker signals.

RNA design aims to identify sequences that fold into specified secondary structures. Existing methods formulate the task as target-specific search or conditional generation. However, natural RNA evolution proceeds through sequence variation and selection, with compensatory substitutions, whereas these methods do not explicitly model this process. To address this limitation, we propose a two-stage framework comprising RNA Inverse-Folding Flow (RNA-IFlow) and RNA-IFlow-RL. RNA-IFlow uses structure-conditioned Dirichlet Flow Matching to model coordinated variation across the sequence, while RNA-IFlow-RL maps the learned flow to a pairing-preserving finite policy and refines it with thermodynamic feedback. Our framework achieves leading performance on multiple benchmarks, reaching 85.19% Pass@1 on Rfam-27. Further analyses reveal thermodynamic gains, policy dynamics, and robustness across settings. Our work couples coordinated variation with thermodynamic selection, offering a novel paradigm for RNA design.

Identity-conditioned diffusion models enable high-quality and identity-consistent face generation, but they also raise severe privacy concerns, as models may continue to synthesize individuals despite their right to be forgotten. While machine unlearning has been extensively studied for concept and data removal, identity unlearning remains largely unexplored, particularly in models conditioned directly on identity embeddings rather than text prompts. In this work, we study identity unlearning in Arc2Face, a state-of-the-art identity-conditioned latent diffusion model for face generation, and introduce Proximity-guided Identity Unlearning (PIU), an anchor-guided framework for identity unlearning. Specifically, we formulate identity removal as an identity replacement objective that reassigns the source identity to a selected anchor identity in the learned identity space, and we complement it with a proximity-based anchor selection strategy motivated by the geometry of ArcFace representations. We further show that effective unlearning can be achieved through localized fine-tuning of a small subset of identity-sensitive cross-attention layers. Experiments across multiple target identities show that our framework effectively suppresses generation of the target identity while preserving realism and identity consistency for retained identities, as validated by improved performance on unlearning and image-quality metrics, together with qualitative evaluation. The source code for the PIU identity unlearning framework is made publicly available at https://github.com/edgarcancinoe/piu-unlearning.

Many localized large language model (LLM) unlearning methods select a small parameter subset from a localization signal and keep it fixed during optimization. The parameters most associated with a target, however, need not be the best ones to update, and candidate interventions can change value as optimization proceeds. In a controlled experiment, a storage-localization score reaches an area under the receiver operating characteristic curve (AUROC) of 0.981, yet storage identity agrees with the better intervention on only 17/36 targets, while low-rank adaptation (LoRA) wins 35/36. We introduce Intervention Score, which ranks editable groups by the predicted effect of the actual unlearning update while accounting for collateral damage, and use it to form the static intervention-value baseline (Static-IV). We then introduce selective dynamic intervention re-ranking (DIR-R), which revisits that subset only when a calibrated probe justifies the comparison. On the Natural-TOFU dataset, our method has positive descriptive margins in 19/20 comparisons between methods and objectives, although several are near zero. On the LACUNA localization-precision benchmark, our mean terminal utility is higher in all six negative preference optimization (NPO) and SimNPO comparisons: NPO margins range from +0.431 to +0.848, and SimNPO margins range from +0.503 to +0.571. The gradient-difference (GradDiff) objective reveals substantial field dependence. Relative to Static-IV, the primary four-field GradDiff evaluation has six wins, six ties, and no losses, with mean and median paired gains of +0.165 and +0.0025. The evidence supports separating localization, initial intervention selection, and checkpoint-dependent support revision.

Specifying robotic manipulation tasks in a manner that is both expressive and precise remains a central challenge. While visual goals provide a compact and unambiguous task specification, existing goal-conditioned policies often struggle with long-horizon manipulation due to their reliance on single-step action prediction without explicit modeling of task progress. We propose Act2Goal, a general goal-conditioned manipulation policy that integrates a goal-conditioned visual world model with multi-scale temporal control. Given a current observation and a target visual goal, the world model generates a plausible sequence of intermediate visual states that captures long-horizon structure. To translate this visual plan into robust execution, we introduce Multi-Scale Temporal Hashing (MSTH), which decomposes the imagined trajectory into dense proximal frames for fine-grained closed-loop control and sparse distal frames that anchor global task consistency. The policy couples these representations with motor control through end-to-end cross-attention, enabling coherent long-horizon behavior while remaining reactive to local disturbances. Act2Goal achieves strong zero-shot generalization to novel objects, spatial layouts, and environments. We further enable reward-free online adaptation through hindsight goal relabeling with LoRA-based finetuning, allowing rapid autonomous improvement without external supervision. Real-robot experiments demonstrate that Act2Goal improves success rates from 30% to 90% on challenging out-of-distribution tasks within minutes of autonomous interaction, validating that goal-conditioned world models with multi-scale temporal control provide structured guidance necessary for robust long-horizon manipulation. Project page: https://act2goal.github.io/

Whispered speech lacks vocal-fold excitation and exhibits reduced energy and shifted formant frequencies, making natural and intelligible voice reconstruction highly challenging. To address this issue, we propose WhisperVC, a three-stage framework for Mandarin whisper-to-speech (W2S) conversion. Stage~1 employs a fine-tuned Content Encoder based on the OpenAI Whisper-large~V3 model and a Conformer-based variational autoencoder with soft-DTW alignment to learn domain-invariant and temporally consistent representations. Stage~2 introduces a deterministic Length--Channel Aligner and a duration-free FastSpeech~2 model conditioned on speaker embeddings for controllable timbre and stable prosody. Stage~3 fine-tunes a HiFi-GAN vocoder on predicted mel-spectrograms to synthesize high-fidelity waveforms. Experiments on the AISHELL6-Whisper corpus demonstrate that WhisperVC achieves near ground-truth quality (DNSMOS~3.11, UTMOS~2.52, CER~18.67\%), while maintaining speaker similarity (cosine~0.76) and robust performance under whisper-only inference.

Video relighting requires balancing long-form temporal consistency with a physically grounded understanding of light transport, which depends on accurate estimation of intrinsic scene properties such as materials, geometry, and illumination. Existing methods follow two paradigms: (1) reconstruct a video's photometric properties via inverse rendering and relight them to a target illumination via forward rendering, using physically-based rendering (PBR) or a neural renderer; these suffer from noisy reconstructions and struggle with hard-to-model effects such as global illumination. (2) Frame the task as generative video-to-video translation conditioned on relighting targets (a target environment map or text); this limits relighting control and temporal stability, since diffusion models struggle to translate long-form videos, and is constrained by the availability of input/relit training pairs. We propose LightCrafter, a hybrid pipeline that reformulates video relighting as video translation of a proxy video: rather than translating the input video directly to the target, we translate a PBR rendering of the input under the target illumination to the final target. This bakes illumination targets into the PBR proxy, removing the need to teach the diffusion model illumination concepts like environment maps, and enables more intricate lighting control while naturally providing long-form temporal consistency. We show PBR renders alone already outperform some prior art but struggle with effects like global illumination; to capture these, we leverage photometric priors in video generation models by post-training CogVideoX on synthetic video pairs and real-world unpaired videos. We outperform prior state-of-the-art on existing real-world relighting benchmarks and contribute a synthetic benchmark for further analysis. We will release our dataset, benchmark, metrics, and code.

Latent world models have emerged as a powerful planning paradigm by learning action-conditioned predictive dynamics and using them as internal simulators to imagine and evaluate candidate action sequences. However, as the planning horizon grows, performance becomes increasingly constrained by proposal quality: a fixed candidate budget must search an exponentially larger action space, making it difficult to expose the world model to high-quality candidate futures for evaluation. In this paper, we introduce a prior-conditioned planner that replaces random proposal initialization with structured guidance. At each planning stage, a goal-conditioned generator predicts the next reachable latent subgoal for a specified duration, which is then used to condition the generation of candidate action sequences. To capture semantic information across temporal scales, we use subgoals of varying durations as priors, balancing fine-grained local control with higher-level long-horizon progress. Then the frozen world model evaluates and refines these subgoal-conditioned proposals before execution. Experiments on PushT and OGBench Cube show that coupling latent subgoal decomposition with prior-conditioned action generation substantially improves long-horizon planning while preserving strong short-horizon performance. To be specific, when the target offset is 150, it raises PushT success from 12.7% to 64.7% and OGBench Cube success from 26.7% to 67.3%.

The ability of generative models to produce highly realistic synthetic face images has raised security and ethical concerns. As a first line of defense against such fake faces, deep learning based forensic classifiers have been developed. While these forensic models can detect whether a face image is synthetic or real with high accuracy, they are also vulnerable to adversarial attacks. Although such attacks can be highly successful in evading detection by forensic classifiers, they introduce visible noise patterns that are detectable through careful human scrutiny. Additionally, these attacks assume access to the target model(s) which may not always be true. Attempts have been made to directly perturb the latent space of GANs to produce adversarial fake faces that can circumvent forensic classifiers. In this work, we go one step further and show that it is possible to successfully generate adversarial fake faces with a specified set of attributes (e.g., hair color, eye size, race, gender, etc.). To achieve this goal, we leverage the state-of-the-art generative model StyleGAN with disentangled representations, which enables a range of modifications without leaving the manifold of natural images. We propose a framework to search for adversarial latent codes within the feature space of StyleGAN, where the search can be guided either by a text prompt or a reference image. We also propose a meta-learning based optimization strategy to achieve transferable performance on unknown target models. Extensive experiments demonstrate that the proposed approach can produce semantically manipulated adversarial fake faces, which are true to the specified attribute set and can successfully fool forensic face classifiers, while remaining undetectable by humans. Code: https://github.com/koushiksrivats/face_attribute_attack.

Imitation learning is a popular approach for teaching motor skills to robots. However, most approaches focus on extracting policy parameters from execution traces alone (i.e., motion trajectories and perceptual data). No adequate communication channel exists between the human expert and the robot to describe critical aspects of the task, such as the properties of the target object or the intended shape of the motion. Motivated by insights into the human teaching process, we introduce a method for incorporating unstructured natural language into imitation learning. At training time, the expert can provide demonstrations along with verbal descriptions in order to describe the underlying intent (e.g., "go to the large green bowl"). The training process then interrelates these two modalities to encode the correlations between language, perception, and motion. The resulting language-conditioned visuomotor policies can be conditioned at runtime on new human commands and instructions, which allows for more fine-grained control over the trained policies while also reducing situational ambiguity. We demonstrate in a set of simulation experiments how our approach can learn language-conditioned manipulation policies for a seven-degree-of-freedom robot arm and compare the results to a variety of alternative methods.

Recent 3D face reconstruction methods have made remarkable advancements, yet there remain huge challenges in monocular high-quality facial reflectance reconstruction. Existing methods rely on a large amount of light-stage captured data to learn facial reflectance models. However, the lack of subject diversity poses challenges in achieving good generalization and widespread applicability. In this paper, we learn the reflectance prior in image space rather than UV space and present a framework named ID2Reflectance. Our framework can directly estimate the reflectance maps of a single image while using limited reflectance data for training. Our key insight is that reflectance data shares facial structures with RGB faces, which enables obtaining expressive facial prior from inexpensive RGB data thus reducing the dependency on reflectance data. We first learn a high-quality prior for facial reflectance. Specifically, we pretrain multi-domain facial feature codebooks and design a codebook fusion method to align the reflectance and RGB domains. Then, we propose an identity-conditioned swapping module that injects facial identity from the target image into the pre-trained autoencoder to modify the identity of the source reflectance image. Finally, we stitch multi-view swapped reflectance images to obtain renderable assets. Extensive experiments demonstrate that our method exhibits excellent generalization capability and achieves state-of-the-art facial reflectance reconstruction results for in-the-wild faces. Our project page is https://xingyuren.github.io/id2reflectance/.

Recently, learning-based controllers have been shown to push mobile robotic systems to their limits and provide the robustness needed for many real-world applications. However, only classical optimization-based control frameworks offer the inherent flexibility to be dynamically adjusted during execution by, for example, setting target speeds or actuator limits. We present a framework to overcome this shortcoming of neural controllers by conditioning them on an auxiliary input. This advance is enabled by including a feature-wise linear modulation layer (FiLM). We use model-free reinforcement-learning to train quadrotor control policies for the task of navigating through a sequence of waypoints in minimum time. By conditioning the policy on the maximum available thrust or the viewing direction relative to the next waypoint, a user can regulate the aggressiveness of the quadrotor's flight during deployment. We demonstrate in simulation and in real-world experiments that a single control policy can achieve close to time-optimal flight performance across the entire performance envelope of the robot, reaching up to 60 km/h and 4.5g in acceleration. The ability to guide a learned controller during task execution has implications beyond agile quadrotor flight, as conditioning the control policy on human intent helps safely bringing learning based systems out of the well-defined laboratory environment into the wild.

We focus on the task of language-conditioned grasping in clutter, in which a robot is supposed to grasp the target object based on a language instruction. Previous works separately conduct visual grounding to localize the target object, and generate a grasp for that object. However, these works require object labels or visual attributes for grounding, which calls for handcrafted rules in planner and restricts the range of language instructions. In this paper, we propose to jointly model vision, language and action with object-centric representation. Our method is applicable under more flexible language instructions, and not limited by visual grounding error. Besides, by utilizing the powerful priors from the pre-trained multi-modal model and grasp model, sample efficiency is effectively improved and the sim2real problem is relived without additional data for transfer. A series of experiments carried out in simulation and real world indicate that our method can achieve better task success rate by less times of motion under more flexible language instructions. Moreover, our method is capable of generalizing better to scenarios with unseen objects and language instructions. Our code is available at https://github.com/xukechun/Vision-Language-Grasping

Scaling robot learning requires massive, diverse trajectory data, yet collection is currently bottlenecked by physical teleoperation, where every demonstration binds operator time to specific hardware and workspaces. We introduce digital teleoperation, a paradigm that decouples data collection from physical constraints by replacing the real robot with a generative world model. In this framework, an operator's hand-pose stream drives a robot-centric generative world model to synthesize high-fidelity egocentric videos from a single reference image. The recorded pose stream serves as an embodiment-agnostic action label transferable to any target robot via standard retargeting, yielding complete state-action trajectories for imitation learning independent of physical hardware. We instantiate this paradigm in RynnWorld-Teleop, a system that integrates depth-aware skeletal conditioning, progressive human-to-robot training on a video Diffusion Transformer, and streaming autoregressive distillation. This pipeline compresses the generative process into a single-pass inference, enabling 40+ FPS, real-time interactive generation on a single H100 GPU. Policies trained exclusively on RynnWorld-Teleop-generated data achieve effective zero-shot Sim2Real transfer across dexterous and diverse bimanual tasks. Moreover, augmenting real-world datasets with our digitally teleoperated data consistently improves success rates, demonstrating that RynnWorld-Teleop serves as a high-fidelity, scalable data engine for the next generation of robotic agents.

In this paper, we propose "personal VAD", a system to detect the voice activity of a target speaker at the frame level. This system is useful for gating the inputs to a streaming on-device speech recognition system, such that it only triggers for the target user, which helps reduce the computational cost and battery consumption, especially in scenarios where a keyword detector is unpreferable. We achieve this by training a VAD-alike neural network that is conditioned on the target speaker embedding or the speaker verification score. For each frame, personal VAD outputs the probabilities for three classes: non-speech, target speaker speech, and non-target speaker speech. Under our optimal setup, we are able to train a model with only 130K parameters that outperforms a baseline system where individually trained standard VAD and speaker recognition networks are combined to perform the same task.

Destructive single-cell measurements provide unpaired population snapshots rather than observations of the same cells across conditions. Local cell states and transition requests may also be insufficient to distinguish responses across source populations. We introduce TempoBridge, a common source-conditioned transport formulation for temporal, genetic, and chemical population transitions. Source cells initialize latent transport and provide a fixed empirical population summary. The velocity field receives this summary alongside the evolving cell state, flow time, and a structured transition descriptor. Minibatch optimal transport (OT) supplies couplings only for conditional flow-matching training paths; inference requires neither target expression nor OT computation. On held-out donors, TempoBridge achieves an Energy distance of 0.129 versus 0.144 for scGen. Genetic mean-expression L_2 error is 2.261 versus 3.156 for scGPT-scratch under Seen 2/2. On held-out compounds, condition-averaged drug-effect correlation is 0.598 versus 0.561 for the CellFlow adapter. Temporal ablations show higher mean distributional error after removing source context, replacing optimal transport with random pairing, or replacing flow matching with static residual regression. Together, these results demonstrate the predictive utility of a common source-conditioned transport formulation across held-out donors, gene combinations, and compounds.

A central task in virtual cell modeling is predicting single-cell transcriptional responses to unseen genetic perturbations and drug combinations, and biological networks provide valuable priors on gene relationships. Existing graph-based models commonly use the same network to structure gene representations and mediate intergene interactions, thereby implicitly treating stable associations as perturbation-response pathways. Gene Ontology and control-derived coexpression networks encode relatively stable relationships rather than intervention-specific response directions or magnitudes. We therefore propose GeneGeoFlow, which conditions a control-anchored residual flow on gene-wise geometry derived from biological networks to learn intervention-specific transcriptional responses. GeneGeoFlow derives multi-scale spectral coordinates from Gene Ontology and control-derived coexpression networks. A perturbation-conditioned, gene-wise gating module selects relevant structural scales and network sources, yielding intervention-specific gene geometry. The resulting geometry conditions a control-anchored residual flow without explicitly propagating target-derived signals along the graph. Condition-wise optimal transport couples unpaired control and perturbed populations for training, while a Delta-correlation objective aligns the predicted and observed condition-level expression-shift directions. GeneGeoFlow achieves Pearson Delta scores of 0.8979 on the Norman additive benchmark and 0.9088 on five held-out drug combinations in the fixed ComboSciPlex test split. These results support perturbation-conditioned gene geometry as an effective structural prior for intervention-specific response prediction, without conflating stable gene relationships with response propagation.

Fashion-image editing represents a challenging computer vision task, where the goal is to incorporate selected apparel into a given input image. Most existing techniques, known as Virtual Try-On methods, deal with this task by first selecting an example image of the desired apparel and then transferring the clothing onto the target person. Conversely, in this paper, we consider editing fashion images with text descriptions. Such an approach has several advantages over example-based virtual try-on techniques, e.g.: (i) it does not require an image of the target fashion item, and (ii) it allows the expression of a wide variety of visual concepts through the use of natural language. Existing image-editing methods that work with language inputs are heavily constrained by their requirement for training sets with rich attribute annotations or they are only able to handle simple text descriptions. We address these constraints by proposing a novel text-conditioned editing model, called FICE (Fashion Image CLIP Editing), capable of handling a wide variety of diverse text descriptions to guide the editing procedure. Specifically with FICE, we augment the common GAN inversion process by including semantic, pose-related, and image-level constraints when generating images. We leverage the capabilities of the CLIP model to enforce the semantics, due to its impressive image-text association capabilities. We furthermore propose a latent-code regularization technique that provides the means to better control the fidelity of the synthesized images. We validate FICE through rigorous experiments on a combination of VITON images and Fashion-Gen text descriptions and in comparison with several state-of-the-art text-conditioned image editing approaches. Experimental results demonstrate FICE generates highly realistic fashion images and leads to stronger editing performance than existing competing approaches.

Text-to-image diffusion models benefit artists with high-quality image generation. Yet its stochastic nature prevent artists from creating consistent images of the same character. Existing methods try to tackle this challenge and generate consistent content in various ways. However, they either depend on external data or require expensive tuning of the diffusion model. For this issue, we argue that a lightweight but intricate guidance is enough to function. Aiming at this, we lead the way to formalize the objective of consistent generation, derive a clustering-based score function and propose a novel paradigm, OneActor. We design a cluster-conditioned model which incorporates posterior samples to guide the denoising trajectories towards the target cluster. To overcome the overfitting challenge shared by one-shot tuning pipelines, we devise auxiliary components to simultaneously augment the tuning and regulate the inference. This technique is later verified to significantly enhance the content diversity of generated images. Comprehensive experiments show that our method outperforms a variety of baselines with satisfactory character consistency, superior prompt conformity as well as high image quality. And our method is at least 4 times faster than tuning-based baselines. Furthermore, to our best knowledge, we first prove that the semantic space has the same interpolation property as the latent space dose. This property can serve as another promising tool for fine generation control.

Target speaker extraction (TSE) aims to isolate a specific speaker's speech from a mixture using speaker enrollment as a reference. While most existing approaches are discriminative, recent generative methods for TSE achieve strong results. However, generative methods for TSE remain underexplored, with most existing approaches relying on complex pipelines and pretrained components, leading to computational overhead. In this work, we present FlowTSE, a simple yet effective TSE approach based on conditional flow matching. Our model receives an enrollment audio sample and a mixed speech signal, both represented as mel-spectrograms, with the objective of extracting the target speaker's clean speech. Furthermore, for tasks where phase reconstruction is crucial, we propose a novel vocoder conditioned on the complex STFT of the mixed signal, enabling improved phase estimation. Experimental results on standard TSE benchmarks show that FlowTSE matches or outperforms strong baselines.

Speaker-attributed automatic speech recognition (ASR) in multi-speaker environments remains a major challenge. While some approaches achieve strong performance when fine-tuned on specific domains, few systems generalize well across out-of-domain datasets. Our prior work, Diarization-Conditioned Whisper (DiCoW), leverages speaker diarization outputs as conditioning information and, with minimal fine-tuning, demonstrated strong multilingual and multi-domain performance. In this paper, we address a key limitation of DiCoW: ambiguity in Silence-Target-Non-target-Overlap (STNO) masks, where two or more fully overlapping speakers may have nearly identical conditioning despite differing transcriptions. We introduce SE-DiCoW (Self-Enrolled Diarization-Conditioned Whisper), which uses diarization output to locate an enrollment segment anywhere in the conversation where the target speaker is most active. This enrollment segment is used as fixed conditioning via cross-attention at each encoder layer. We further refine DiCoW with improved data segmentation, model initialization, and augmentation. Together, these advances yield substantial gains: SE-DiCoW reduces macro-averaged tcpWER by 52.4% relative to the original DiCoW on the EMMA MT-ASR benchmark.

We present Omni-Video 2, a scalable and computationally efficient model that connects pretrained multimodal large-language models (MLLMs) with video diffusion models for unified video generation and editing. Our key idea is to exploit the understanding and reasoning capabilities of MLLMs to produce explicit target captions to interpret user instructions. In this way, the rich contextual representations from the understanding model are directly used to guide the generative process, thereby improving performance on complex and compositional editing. Moreover, a lightweight adapter is developed to inject multimodal conditional tokens into pretrained text-to-video diffusion models, allowing maximum reuse of their powerful generative priors in a parameter-efficient manner. Benefiting from these designs, we scale up Omni-Video 2 to a 14B video diffusion model on meticulously curated training data with quality, supporting high quality text-to-video generation and various video editing tasks such as object removal, addition, background change, complex motion editing, etc. We evaluate the performance of Omni-Video 2 on the FiVE benchmark for fine-grained video editing and the VBench benchmark for text-to-video generation. The results demonstrate its superior ability to follow complex compositional instructions in video editing, while also achieving competitive or superior quality in video generation tasks.

Synthesizing controllable 6-DOF object manipulation trajectories in 3D environments is essential for enabling robots to interact with complex scenes, yet remains challenging due to the need for accurate spatial reasoning, physical feasibility, and multimodal scene understanding. Existing approaches often rely on 2D or partial 3D representations, limiting their ability to capture full scene geometry and constraining trajectory precision. We present GMT, a multimodal transformer framework that generates realistic and goal-directed object trajectories by jointly leveraging 3D bounding box geometry, point cloud context, semantic object categories, and target end poses. The model represents trajectories as continuous 6-DOF pose sequences and employs a tailored conditioning strategy that fuses geometric, semantic, contextual, and goaloriented information. Extensive experiments on synthetic and real-world benchmarks demonstrate that GMT outperforms state-of-the-art human motion and human-object interaction baselines, such as CHOIS and GIMO, achieving substantial gains in spatial accuracy and orientation control. Our method establishes a new benchmark for learningbased manipulation planning and shows strong generalization to diverse objects and cluttered 3D environments. Project page: https://huajian- zeng.github. io/projects/gmt/.

Using a diffusion model for parallel drafting is a promising approach for speculative decoding. By predicting tokens at multiple future positions in a single forward pass, diffusion drafters substantially reduce drafting latency. However, this shifts the bottleneck to verification: verifying a single sequence limits acceptance length, while verifying large draft trees incurs excessive target-model latency. We identify a key mismatch in existing draft-tree methods: existing diffusion-tree methods rank nodes by the marginal probability, ignoring that verification is prefix-conditioned. As a result, they may verify unreachable descendants of rejected prefixes, increasing latency with limited acceptance gains. To address this, we propose TAPS, a target-aware prefix selection method that turns diffusion marginals into path-conditioned acceptance estimates. TAPS then selects a compact prefix-closed subtree under a fixed verification budget, improving the acceptance-cost tradeoff rather than simply expanding the draft tree. Experiments across diverse datasets and model families demonstrate that TAPS achieves up to 7.9x lossless end-to-end speedup over vanilla autoregressive decoding, outperforming state-of-the-art DFlash and DDTree by 1.36x and 1.74x respectively. Our work is available at https://anonymous.4open.science/r/TAPS-EMNLP2026-53DD

Vision-Language-Action (VLA) models have recently shown strong potential for robot learning by following language instructions. However, in practice, language alone is often insufficient to precisely convey human intent. It is difficult to describe which exact object to interact with among similar candidates, where to act on the object, or how the target may change during execution. To address this limitation, we propose Gaze2Act, a novel VLA framework that leverages human gaze as a dynamic and intuitive intent signal for complex interactive manipulation. Gaze2Act first bridges the ego-exo view gap by mapping first-person gaze into the robot's perspective through cross-view semantic matching, producing both an object mask and a gaze point for coarse-to-fine target specification. These cues are then integrated into the policy through perception-level prompting and action-level conditioning, allowing the robot to attend to relevant regions and execute precise interactions under dynamic intent. In a systematic evaluation across seven task categories and 16 real-robot tasks on a Unitree G1 humanoid, Gaze2Act achieves state-of-the-art performance in both intent accuracy and task success rate. It notably outperforms baselines in object disambiguation, fine-grained interaction, and dynamic intent steering. These results demonstrate that human gaze provides a natural, low-burden, and highly expressive modality for human-in-the-loop VLA control.

Critical events in multivariate time series, from turbine failures to cardiac arrhythmias, demand accurate prediction, yet labeled data is scarce because such events are rare and costly to annotate. We introduce HEPA (Horizon-conditioned Event Predictive Architecture), built on two key principles. First, a causal Transformer encoder is pretrained via a Joint-Embedding Predictive Architecture (JEPA): a horizon-conditioned predictor learns to forecast future representations rather than future values, forcing the encoder to capture predictable temporal dynamics from unlabeled data alone. Second, we freeze the encoder and finetune only the predictor toward the target event, producing a monotonic survival cumulative distribution function (CDF) over horizons. With fixed architecture and optimiser hyperparameters across all benchmarks, HEPA handles water contamination, cyberattack detection, volatility regimes, and eight further event types across 11 domains, exceeding leading time-series architectures including PatchTST, iTransformer, MAE, and Chronos-2 on at least 10 of 14 benchmarks, with an order of magnitude fewer tuned parameters and, on lifecycle datasets, an order of magnitude less labeled data.

Layered image assets are widely used in real-world creative workflows, enabling non-destructive iteration and flexible re-composition. Recent advances in layered image generation and decomposition synthesize or recover layered representations, yet controllable editing of layered images remains challenging. Manual editing requires careful coordination across layers to maintain consistent illumination and contact, while AI-based pipelines collapse layers into a flattened image for editing, then decompose them again, introducing background-to-foreground leakage and unstable transparency. To address these limitations, we propose LimeCross, a training-free context-conditioned layered image editing framework that edits user-selected RGBA layers according to text while keeping the remaining layers unchanged. It leverages contextual cues from other layers using a bi-stream attention mechanism to preserve cross-layer consistency, while explicitly maintaining layer integrity to prevent the contamination of edited layers. To evaluate our approach, we introduce LayerEditBench, a benchmark of 1500 layered scenes with paired source/target prompts, along with evaluation protocols that assess both edit fidelity and alpha channel stability. Extensive experiments demonstrate that LimeCross improves layer purity and composite realism over strong editing baselines, establishing context-conditioned layered editing as a principled framework for controllable generative creation.

Language-conditioned quadrotor flight requires a policy to ground semantic goals, anticipate the visual consequences of ego-motion, and output control references that remain smooth and dynamically executable under rapidly changing first-person views. Existing aerial vision-language navigation and vision-language-action methods commonly use discrete actions, high-level waypoints, or instantaneous velocity commands, which provide limited supervision about how flight actions change future observations. We present AeroAct, an action-centered world-action model (WAM) for quadrotor navigation. To the best of our knowledge, AeroAct is the first WAM instantiated and demonstrated for real-world aerial flight. The model adapts a pretrained video diffusion Transformer to predict local trajectory-action chunks from egocentric visual history, proprioception, and language. Future first-person frames are used during training as dense consequence supervision, while deployment directly decodes actions without generating future video. To obtain aligned visual, state, language, and dynamically feasible action data, we build a DiffAero-based pipeline with complementary Isaac Lab and 3D Gaussian splatting renderers. We further introduce a low-cost handheld collection device that couples camera observations with motion estimates to recreate flight-like egocentric trajectories, and a self-guidance procedure that improves temporal consistency across overlapping trajectory chunks. Closed-loop simulation and real-world experiments show that temporal visual context improves target tracking and object-search performance, and that WAM-based policies can be executed on a physical quadrotor.

Talking head video generation aims to animate a human face in a still image with dynamic poses and expressions using motion information derived from a target-driving video, while maintaining the person's identity in the source image. However, dramatic and complex motions in the driving video cause ambiguous generation, because the still source image cannot provide sufficient appearance information for occluded regions or delicate expression variations, which produces severe artifacts and significantly degrades the generation quality. To tackle this problem, we propose to learn a global facial representation space, and design a novel implicit identity representation conditioned memory compensation network, coined as MCNet, for high-fidelity talking head generation.~Specifically, we devise a network module to learn a unified spatial facial meta-memory bank from all training samples, which can provide rich facial structure and appearance priors to compensate warped source facial features for the generation. Furthermore, we propose an effective query mechanism based on implicit identity representations learned from the discrete keypoints of the source image. It can greatly facilitate the retrieval of more correlated information from the memory bank for the compensation. Extensive experiments demonstrate that MCNet can learn representative and complementary facial memory, and can clearly outperform previous state-of-the-art talking head generation methods on VoxCeleb1 and CelebV datasets. Please check our https://github.com/harlanhong/ICCV2023-MCNET{Project}.

Generating realistic human videos remains a challenging task, with the most effective methods currently relying on a human motion sequence as a control signal. Existing approaches often use existing motion extracted from other videos, which restricts applications to specific motion types and global scene matching. We propose Move-in-2D, a novel approach to generate human motion sequences conditioned on a scene image, allowing for diverse motion that adapts to different scenes. Our approach utilizes a diffusion model that accepts both a scene image and text prompt as inputs, producing a motion sequence tailored to the scene. To train this model, we collect a large-scale video dataset featuring single-human activities, annotating each video with the corresponding human motion as the target output. Experiments demonstrate that our method effectively predicts human motion that aligns with the scene image after projection. Furthermore, we show that the generated motion sequence improves human motion quality in video synthesis tasks.

Automatic Speech Recognition (ASR) in professional settings faces challenges that existing benchmarks underplay: dense domain terminology, formal register variation, and near-zero tolerance for critical entity errors. We present ProfASR-Bench, a professional-talk evaluation suite for high-stakes applications across finance, medicine, legal, and technology. Each example pairs a natural-language prompt (domain cue and/or speaker profile) with an entity-rich target utterance, enabling controlled measurement of context-conditioned recognition. The corpus supports conventional ASR metrics alongside entity-aware scores and slice-wise reporting by accent and gender. Using representative families Whisper (encoder-decoder ASR) and Qwen-Omni (audio language models) under matched no-context, profile, domain+profile, oracle, and adversarial conditions, we find a consistent pattern: lightweight textual context produces little to no change in average word error rate (WER), even with oracle prompts, and adversarial prompts do not reliably degrade performance. We term this the context-utilization gap (CUG): current systems are nominally promptable yet underuse readily available side information. ProfASR-Bench provides a standardized context ladder, entity- and slice-aware reporting with confidence intervals, and a reproducible testbed for comparing fusion strategies across model families. Dataset: https://huggingface.co/datasets/prdeepakbabu/ProfASR-Bench Code: https://github.com/prdeepakbabu/ProfASR-Bench

The Vision-Language-Action (VLA) models have demonstrated remarkable performance on embodied tasks and shown promising potential for real-world applications. However, current VLAs still struggle to produce consistent and precise target-oriented actions, as they often generate redundant or unstable motions along trajectories, limiting their applicability in time-sensitive scenarios.In this work, we attribute these redundant actions to the spatially uniform perception field of existing VLAs, which causes them to be distracted by target-irrelevant objects, especially in complex environments.To address this issue, we propose an efficient PosA-VLA framework that anchors visual attention via pose-conditioned supervision, consistently guiding the model's perception toward task-relevant regions. The pose-conditioned anchor attention mechanism enables the model to better align instruction semantics with actionable visual cues, thereby improving action generation precision and efficiency. Moreover, our framework adopts a lightweight architecture and requires no auxiliary perception modules (e.g., segmentation or grounding networks), ensuring efficient inference. Extensive experiments verify that our method executes embodied tasks with precise and time-efficient behavior across diverse robotic manipulation benchmarks and shows robust generalization in a variety of challenging environments.

End-to-end autonomous driving (E2E-AD) has achieved remarkable progress. However, one practical and useful function has been long overlooked: users may wish to customize the desired speed of the policy or specify whether to allow the autonomous vehicle to overtake. To bridge this gap, we present Bench2Drive-Speed, a benchmark with metrics, dataset, and baselines for desired-speed conditioned autonomous driving. We introduce explicit inputs of users' desired target-speed and overtake/follow instructions to driving policy models. We design quantitative metrics, including Speed-Adherence Score and Overtake Score, to measure how faithfully policies follow user specifications, while remaining compatible with standard autonomous driving metrics. To enable training of speed-conditioned policies, one approach is to collect expert demonstrations that strictly follow speed requirements, an expensive and unscalable process in the real world. An alternative is to adapt existing regular driving data by treating the speed observed in future frames as the target speed for training. To investigate this, we construct CustomizedSpeedDataset, composed of 2,100 clips annotated with experts demonstrations, enabling systematic investigation of supervision strategies. Our experiments show that, under proper re-annotation, models trained on regular driving data perform comparably to on expert demonstrations, suggesting that speed supervision can be introduced without additional complex real-world data collection. Furthermore, we find that while target-speed following can be achieved without degrading regular driving performance, executing overtaking commands remains challenging due to the inherent difficulty of interactive behaviors. All code, datasets and baselines are available at https://github.com/Thinklab-SJTU/Bench2Drive-Speed

Vision-Language Models (VLMs) enable robots to follow open-language instructions. However, dense VLM embeddings have shown to be noisy and lack spatial consistency. This is problematic for robotic applications, which require simultaneous reasoning over semantics and 3D space. We examine spatial structure across recent VLMs and propose ReSiReg, a feature reconstruction method that uses spatially consistent VLM intermediates to improve dense language-grounded retrieval. ReSiReg clusters intermediates into visual prototypes, derives their language descriptors, and reconstructs each patch as a soft mixture of prototype-level language embeddings. We evaluate quantitatively on OVSS and 3D mapping across backbones, and qualitatively in real-world manipulation scenes. Quantitative results show improved dense retrieval; manipulation scenes show more spatially consistent target activations. We further provide a compact 25M dense VLM for robotic applications, substantially smaller than and competitive with ViT-B baselines. Available at https://resireg.github.io

Pixel-goal navigation specifies targets directly in the agent's camera view, but a target pixel provides neither metric depth nor traversability, making 3D goal grounding and collision-free continuous planning challenging. We present OccPlanner, a goal-aware occupancy-conditioned diffusion planner that grounds pixel goals in egocentric metric space and sequentially conditions the goal representation on temporal visual context and learned local 3D occupancy features. To provide occupancy supervision at scale, we introduce L3ROcc, which converts monocular RGB navigation videos into robot-centric local 3D occupancy annotations through geometric reconstruction and ray-based visibility reasoning. We train OccPlanner on InternData-N1 and evaluate it in closed-loop simulation across four unseen scene categories from InternScenes and two goal-distance ranges. In the 5-8 m setting, OccPlanner increases the average success rate (SR) over NavDP from 20.81% to 71.55% across the four categories, reaching 86.20% and 84.92% in cluttered-easy and cluttered-hard scenes, respectively. Real-world open-loop experiments on a Unitree Go2 further provide initial evidence of sim-to-real transfer and adaptation with L3ROcc-generated supervision.

Natural-language critiques provide supervision beyond scalar rewards for non-verifiable generation, which lacks deterministic verifiers. In critique-guided refinement, a critic gives feedback on an initial response and an actor revises it. However, final revision quality does not reveal whether the critique was actually useful: a capable actor may improve without following the feedback, while valid feedback may fail if the actor cannot execute it. We frame critique as actor-conditioned revision guidance, where usefulness depends on whether the feedback helps the target actor address the intended weakness. We introduce TAIScore (Targeted Actionable Improvement Score), a reward that evaluates the instruction, initial response, critique, and revision together, assessing whether the critique targets a real weakness, whether the actor follows it, and whether the intended aspect improves. We use this reward to train an actor-tailored critic with GRPO, and use critique-guided refinements to construct DPO preference pairs for the actor, forming a co-evolving critic-actor loop where the critic adapts to the actor's changing capability. Experiments show that an 8B critic trained with TAIScore outperforms both a zero-shot 120B critic and critics trained with outcome-only or critique-only reward signals. Co-evolving the critic and actor further improves performance, suggesting that effective critique supervision should adapt as the actor changes.

Large Vision-Language Models produce fluent image descriptions but offer limited semantic control: users cannot reliably specify whether captions should emphasize attributes, relations, or particular image regions. We present Fine-grained Captioning Control Using Scene Rewards (FoCUS), a controllable image captioning method that lets users steer captions toward specific semantic emphases through natural-language control prompts. The core idea is a prompt-conditioned control objective based on scene-graph-aligned component scores. Generated captions are parsed and aligned to scene-graph components such as objects, attributes, and relations. These components are differentially weighted, including negative weights, according to the requested emphasis. We optimize this objective with GRPO and further improve its reliability through a stricter object validity threshold and reasoning-based verification for attribute and relation scoring. To evaluate controllability, we introduce Semantic Control and Precision Evaluation (SCoPE), a benchmark with contrastive Include/Avoid constraints for measuring both target content coverage and out-of-scope suppression. Experiments on two VLM backbones show that FoCUS consistently improves controllability and fine-grained caption quality without degrading general caption performance.

Locating a specific object instance in a cluttered scene using a single reference image and a short description, and reporting when that instance is absent, large vision-language models usually address this task. We ask whether the same capability is available far more cheaply, from representations already learned by a world-model pretraining objective. We present WALDO, a one-shot exemplar- and language-conditioned detection head with 3.4M trainable parameters that reads frozen V-JEPA 2.1 features to jointly predict object localization and target presence, with no gradient on the backbone. Because exemplar-conditioned supervision is scarce, we synthesize training episodes from instance annotations, mining exemplars from ground-truth boxes and constructing absence cases that exclude the referenced instance while leaving same-category distractors in view. This is easy to get wrong: in the obvious implementation, crop size alone predicts the label, and a head trained on it reaches 0.9998 absence AUROC without ever consulting the exemplar, and we report the negative controls that close the shortcut. On 35 held-out cluttered scenes, WALDO achieves a 0.461 catalogue AP@50, compared to 0.306 for a prompted Grounding DINO baseline under an identical scorer. Substituting DINOv3 for V-JEPA under a matched 576-token grid drops within-category absence AUROC from 0.880 to 0.726 and instance AP@50 from 0.201 to 0.141, isolating the pretraining objective rather than input resolution as the source of the gain. Instance-level Success@1, however, reaches only 0.190 against a 0.190 category-chance floor: world-model features transfer to localization precision and absence detection but not to instance identity.

Temporal context is essential for camera-only multi-view 3D object detection. Existing streaming detectors maintain and propagate query states from one frame to the next, requiring sequence-aware training and chronological inference. We propose PQR3D, which performs progressive query refinement within referenceconditioned temporal windows. This design enables random frame sampling and independent inference without persistent query memory. Within each window, PQR3D progressively transfers motion-aligned high-confidence queries from earlier timestamps toward the target frame. We further introduce masked selfattention to regulate interactions among regular, propagated, and denoising queries while keeping denoising supervision isolated from detection queries. In addition, a stage-decoupled anchor embedding injects position before self-attention and size, orientation, and velocity afterward, reducing interference from temporally inconsistent attributes. With a ViT-L backbone, PQR3D sets a new state of the art on the nuScenes test set, achieving 71.6 NDS and 64.9 mAP. Source code is available at https://github.com/huiyegit/PQR3D

We study the task of language-conditioned pick and place in clutter, where a robot should grasp a target object in open clutter and move it to a specified place. Some approaches learn end-to-end policies with features from vision foundation models, requiring large datasets. Others combine foundation models in a zero-shot setting, suffering from cascading errors. In addition, they primarily leverage vision and language foundation models, focusing less on action priors. In this paper, we aim to develop an effective policy by integrating foundation priors from vision, language, and action. We propose A^2, an action prior alignment method that aligns unconditioned action priors with 3D vision-language priors by learning one attention layer. The alignment formulation enables our policy to train with less data and preserve zero-shot generalization capabilities. We show that a shared policy for both pick and place actions enhances the performance for each task, and introduce a policy adaptation scheme to accommodate the multi-modal nature of actions. Extensive experiments in simulation and the real-world show that our policy achieves higher task success rates with fewer steps for both pick and place tasks in clutter, effectively generalizing to unseen objects and language instructions. Videos and codes are available at https://xukechun.github.io/papers/A2.

Natural language is often the easiest and most convenient modality for humans to specify tasks for robots. However, learning to ground language to behavior typically requires impractical amounts of diverse, language-annotated demonstrations collected on each target robot. In this work, we aim to separate the problem of what to accomplish from how to accomplish it, as the former can benefit from substantial amounts of external observation-only data, and only the latter depends on a specific robot embodiment. To this end, we propose Video-Language Critic, a reward model that can be trained on readily available cross-embodiment data using contrastive learning and a temporal ranking objective, and use it to score behavior traces from a separate actor. When trained on Open X-Embodiment data, our reward model enables 2x more sample-efficient policy training on Meta-World tasks than a sparse reward only, despite a significant domain gap. Using in-domain data but in a challenging task generalization setting on Meta-World, we further demonstrate more sample-efficient training than is possible with prior language-conditioned reward models that are either trained with binary classification, use static images, or do not leverage the temporal information present in video data.

Recent advancements in video generation have enabled the development of ``world models'' capable of simulating potential futures for robotics and planning. However, specifying precise goals for these models remains a challenge; text instructions are often too abstract to capture physical nuances, while target images are frequently infeasible to specify for dynamic tasks. To address this, we introduce Goal Force, a novel framework that allows users to define goals via explicit force vectors and intermediate dynamics, mirroring how humans conceptualize physical tasks. We train a video generation model on a curated dataset of synthetic causal primitives-such as elastic collisions and falling dominos-teaching it to propagate forces through time and space. Despite being trained on simple physics data, our model exhibits remarkable zero-shot generalization to complex, real-world scenarios, including tool manipulation and multi-object causal chains. Our results suggest that by grounding video generation in fundamental physical interactions, models can emerge as implicit neural physics simulators, enabling precise, physics-aware planning without reliance on external engines. We release all datasets, code, model weights, and interactive video demos at our project page.

Generative world models (WMs) are increasingly used to synthesize controllable, sensor-conditioned driving videos, yet their reliance on physical priors exposes novel attack surfaces. In this paper, we present Physical-Conditioned World Model Attack (PhysCond-WMA), the first white-box world model attack that perturbs physical-condition channels, such as HDMap embeddings and 3D-box features, to induce semantic, logic, or decision-level distortion while preserving perceptual fidelity. PhysCond-WMA is optimized in two stages: (1) a quality-preserving guidance stage that constrains reverse-diffusion loss below a calibrated threshold, and (2) a momentum-guided denoising stage that accumulates target-aligned gradients along the denoising trajectory for stable, temporally coherent semantic shifts. Extensive experimental results demonstrate that our approach remains effective while increasing FID by about 9% on average and FVD by about 3.9% on average. Under the targeted attack setting, the attack success rate (ASR) reaches 0.55. Downstream studies further show tangible risk, which using attacked videos for training decreases 3D detection performance by about 4%, and worsens open-loop planning performance by about 20%. These findings has for the first time revealed and quantified security vulnerabilities in generative world models, driving more comprehensive security checkers.

An often overlooked factor of robot manipulation performance is the embodiment of the robot itself. Motivated by this problem, we study motion-conditioned robot co-design, where the goal is to generate complete robot designs that track target end-effector trajectories (from human demonstrations) while optimizing user-defined rewards. We introduce Transformer Transformer, a diffusion transformer trained on RoboTokens, a unified tokenization of robot embodiments, states, and actions. The same architecture can be used across embodiment spaces (e.g., wheeled bimanual, quadrupeds, humanoids) and use cases (embodiment generation, cross embodiment controller). Rather than overfitting to one reward function, Transformer Transformer is a dynamics model, whose reward-agnostic state and action predictions can be converted into reward-specific value predictions. These value predictions are used to steer embodiment diffusion towards high value robot designs, through a procedure we call Dynamics Self-Guidance. Experiments across multiple design spaces show zero-shot optimization of unseen rewards and trajectories, improving performance and runtime over the evolutionary baseline. Finally, we fabricated an optimized ALOHA design, which reduced tracking error by over 70% compared to the original design.

Simulated environments enable scalable training data generation for embodied agents, but more data does not necessarily provide what a particular agent needs to learn. Existing environment-generation pipelines largely optimize generic properties such as realism, diversity, or task coverage, while different pretrained policies can fail for different environmental reasons. We therefore introduce WEDGE, a framework for weakness-guided navigation learning in which the failure modes of a pretrained agent guide the generation of training environments at each adaptation round. Given a pretrained policy, WEDGE uses an LLM to propose executable weakness features from contrasting successful and failed rollouts, automatically validates them on the diagnostic set, and selects the strongest validated weakness based on its success-rate gap. The validated weaknesses are then mapped to the environmental factors that control them. WEDGE varies these factors to construct environments in the difficulty regimes where the policy struggles, producing targeted training experience for adaptation. Across three navigation agents with different adaptation mechanisms, we find that policies exhibit distinct weakness profiles and benefit from different training environments. Weakness-conditioned adaptation consistently outperforms matched random and hard-example alternatives on ProcTHOR, while the resulting gains for Uni-NaVid and Gemini also extend to HM3D after ProcTHOR adaptation. Iterative re-diagnosis further shows that dominant weaknesses can persist or shift as the policy improves, providing updated guidance for subsequent environment construction. Together, these results show that policy failures are not only diagnostic signals, but actionable guidance for constructing training environments that target a policy's current weaknesses.

Neural text-to-speech (TTS) has achieved human-like synthetic speech for single-speaker, single-language synthesis. Multilingual TTS systems are limited to resource-rich languages due to the lack of large paired text and studio-quality audio data. In most cases, TTS systems are built using a single speaker's voice. However, there is growing interest in developing systems that can synthesize voices for new speakers using only a few seconds of their speech. This paper presents ZMM-TTS, a multilingual and multispeaker framework utilizing quantized latent speech representations from a large-scale, pre-trained, self-supervised model. Our paper is the first to incorporate the representations from text-based and speech-based self-supervised learning models into multilingual speech synthesis tasks. We conducted comprehensive subjective and objective evaluations through a series of experiments. Our model has been proven effective in terms of speech naturalness and similarity for both seen and unseen speakers in six high-resource languages. We also tested the efficiency of our method on two hypothetical low-resource languages. The results are promising, indicating that our proposed approach can synthesize audio that is intelligible and has a high degree of similarity to the target speaker's voice, even without any training data for the new, unseen language.

Domain shifts such as sensor type changes and geographical situation variations are prevalent in Autonomous Driving (AD), which poses a challenge since AD model relying on the previous domain knowledge can be hardly directly deployed to a new domain without additional costs. In this paper, we provide a new perspective and approach of alleviating the domain shifts, by proposing a Reconstruction-Simulation-Perception (ReSimAD) scheme. Specifically, the implicit reconstruction process is based on the knowledge from the previous old domain, aiming to convert the domain-related knowledge into domain-invariant representations, e.g., 3D scene-level meshes. Besides, the point clouds simulation process of multiple new domains is conditioned on the above reconstructed 3D meshes, where the target-domain-like simulation samples can be obtained, thus reducing the cost of collecting and annotating new-domain data for the subsequent perception process. For experiments, we consider different cross-domain situations such as Waymo-to-KITTI, Waymo-to-nuScenes, Waymo-to-ONCE, etc, to verify the zero-shot target-domain perception using ReSimAD. Results demonstrate that our method is beneficial to boost the domain generalization ability, even promising for 3D pre-training.

This work introduces a new task, text-conditioned selective video-to-audio (V2A) generation, which produces only the user-intended sound from a multi-object video. This capability is especially crucial in multimedia production, where audio tracks are handled individually for each sound source for precise editing, mixing, and creative control. However, current approaches generate single source-mixed sounds at once, largely because visual features are entangled, and region cues or prompts often fail to specify the source. We propose SelVA, a novel text-conditioned V2A model that treats the text prompt as an explicit selector of target source and modulates video encoder to distinctly extract prompt-relevant video features. The proposed supplementary tokens promote cross-attention by suppressing text-irrelevant activations with efficient parameter tuning, yielding robust semantic and temporal grounding. SelVA further employs a self-augmentation scheme to overcome the lack of mono audio track supervision. We evaluate SelVA on VGG-MONOAUDIO, a curated benchmark of clean single-source videos for such a task. Extensive experiments and ablations consistently verify its effectiveness across audio quality, semantic alignment, and temporal synchronization. Code and demo are available at https://jnwnlee.github.io/selva-demo/.

Latent action world models let agents plan new behaviors at test time by predicting how actions change the environment, and joint-embedding predictive architectures (JEPAs) do so by forecasting future latent states rather than pixels. Yet nearly all such models see the world through a camera, even though robotic manipulation is fundamentally geometric: in robotics goals for manipulation are traditionally specified by target object poses, not by images of the object once placed. We ask whether latent planning survives a shift from appearance to geometry, on the observation side as well as on the goal specifications side. To answer this, we extend the stable-worldmodel evaluation platform with simulated LiDAR-style raycast point clouds as a new sensor modality, and adapt three JEPA designs to point clouds: a frozen-encoder model built on Utonia features, a distribution-prior model based on LeWM, and an action-sensitive model based on Delta-JEPA. We further introduce a goal-encoding mechanism that constructs the goal latent from the current latent and a 3D target pose, removing the need for goal images or goal point clouds. A comparative evaluation of the different anti-collapse mechanisms shows that point-cloud world models can match their image-based counterparts, demonstrating that the modality shift from appearance to geometry is achievable. All models are released as open weights with open-source training and inference code, to make world-model planning accessible for LiDAR-driven and pose-directed robotic tasks.

Natural language messages often contain quasi-identifiers that are weak in isolation but can jointly reveal an individual's private attributes. We call such a jointly revealing set of cues a quasi-evidence group. Existing privacy benchmarks focus on explicit identifiers, attribute inference, or task-driven disclosures, leaving inference from quasi-evidence groups largely unmeasured. In practice, whether exposing such a quasi-evidence group violates privacy also depends on sender-specified disclosure policies. We introduce QuasiLeak-Bench, a benchmark for policy-conditioned quasi-evidence group recovery, which evaluates whether detectors recover complete quasi-evidence groups and flag the disclosures the given policy prohibits. To obtain reliable ground truth at scale, a reverse-construction pipeline first selects weak quasi-identifiers, composes them into quasi-evidence groups verified to jointly reveal a target attribute, and generates documents around this evidence, followed by automated quality control. Experiments show that existing privacy detectors transfer poorly to QuasiLeak-Bench, and locally deployable LLM-based detectors fall far behind proprietary models, mainly because they miss most quasi-evidence groups altogether. However, a 4B model fine-tuned on our training split surpasses the strongest prompted model on held-out documents, showing that the task is learnable.

Diffusion-based models have recently revolutionized image generation, achieving unprecedented levels of fidelity. However, consistent generation of high-quality images remains challenging partly due to the lack of conditioning mechanisms for perceptual quality. In this work, we propose methods to integrate image quality assessment (IQA) models into diffusion-based generators, enabling quality-aware image generation. We show that diffusion models can learn complex qualitative relationships from both IQA models' outputs and internal activations. First, we experiment with gradient-based guidance to optimize image quality directly and show this method has limited generalizability. To address this, we introduce IQA-Adapter, a novel framework that conditions generation on target quality levels by learning the implicit relationship between images and quality scores. When conditioned on high target quality, IQA-Adapter can shift the distribution of generated images towards a higher-quality subdomain, and, inversely, it can be used as a degradation model, generating progressively more distorted images when provided with a lower-quality signal. Under high-quality condition, IQA-Adapter achieves up to a 10% improvement across multiple objective metrics, as confirmed by a user preference study, while preserving generative diversity and content. Furthermore, we extend IQA-Adapter to a reference-based conditioning scenario, utilizing the rich activation space of IQA models to transfer highly specific, content-agnostic qualitative features between images.

Large pre-trained language models have brought remarkable progress in NLP. Pre-training and Fine-tuning have given state-of-art performance across tasks in text processing. Data Augmentation techniques have also helped build state-of-art models on low or zero resource tasks. Many works in the past have attempted at learning a single massively-multilingual machine translation model for zero-shot translation. Although those translation models are producing correct translations, the main challenge is those models are producing the wrong languages for zero-shot translation. This work and its results indicate that prompt conditioned large models do not suffer from off-target language errors i.e. errors arising due to translation to wrong languages. We empirically demonstrate the effectiveness of self-supervised pre-training and data augmentation for zero-shot multi-lingual machine translation.

Fixed-layout indoor furniture styling requires selecting assets that form a coherent room without changing the prescribed furniture categories, positions, orientations, or scales. Existing approaches typically retrieve each asset independently or rely on static local relations, making them prone to shape, material, and color conflicts after scene composition. We introduce StyleForge, a scene-level structured selection framework built on a dynamic hypergraph style field. A frozen multimodal large language model extracts structured style priors from an open-ended style request and the fixed layout, while StyleForge maintains a learnable candidate distribution for each furniture slot. Conditioned on the target style, the dynamic hypergraph style field adaptively activates and weights layout-induced hyperedges to capture higher-order dependencies among furniture. Counterfactual style preference learning then treats each candidate as a local substitution in the current style field and evaluates its contextual compatibility using Mahalanobis energies. Training alternates between optimizing the style field and the candidate logits. At inference, the model remains frozen and test-time training updates only room-specific candidate logits, progressively correcting cross-slot style conflicts as the global scene context evolves. Experiments on 3D-FRONT demonstrate state-of-the-art furniture retrieval and scene-level style coherence, producing more coherent fixed-layout furniture arrangements than object- and scene-level retrieval baselines.

Recent advances in Multimodal Large Language Models (MLLMs) have significantly improved remote sensing (RS) multimodal understanding. Language-conditioned segmentation is crucial for fine-grained target understanding in Unmanned Aerial Vehicle (UAV) videos. However, this task remains challenging due to the prevalence of small, visually ambiguous targets and dynamic aerial perspectives. In this paper, we propose SkyVLaM, a multimodal large language model for UAV video understanding. SkyVLaM constructs sparse tokens directly from patch-level video representations through a temporal basis perceiver, regularizes the sparse basis to encourage complementary temporal cues, and adaptively selects a temporally coherent dense segment for high-resolution inspection. The resulting sparse and dense tokens are jointly processed by a large language model for query-conditioned segmentation. We further build SkyVid, consisting of SkyVid-VGCG and SkyVid-RVOS for video grounded conversation generation and referring video object segmentation, respectively. SkyVid contains 101 videos, 33.6K frames, and 1.53M pixel-level object instances. Experiments show that SkyVLaM provides a more effective allocation of the visual token budget and improves language-conditioned video segmentation in UAV scenarios.

We introduce MORAD, an online reinforcement learning framework for backbone-conditioned RNA diffusion models that trains a single shared policy across diverse target backbones. Structure-conditioned RNA inverse design seeks nucleotide sequences compatible with a target three-dimensional backbone, yet existing reinforcement learning approaches either optimize a separate policy for each target backbone or rely on offline preference optimization, leaving online post-training of a reusable backbone-conditioned model largely unexplored. MORAD combines backbone-conditioned group sampling, group-relative reward normalization, and a forward-process diffusion objective. Beyond existing RL rewards that primarily target tertiary structural quality, MORAD jointly optimizes six measurements spanning tertiary geometry, base pairing, ensemble behavior, and sequence composition. To aggregate these heterogeneous objectives despite differences in scale and optimization direction, MORAD maps each measurement to a bounded desirability score and combines them with a weighted geometric mean. Compared with a tertiary-structure-only reward, this multi-objective formulation improves 10 of the 11 evaluation metrics that have a preferred direction. Applied to pretrained RIDE, MORAD improves GDT-TS by 16.0% (from 0.3300 to 0.3827) and pairing MCC by 19.4% (from 0.6110 to 0.7295), while reducing normalized ensemble defect by 27.5% (from 0.3906 to 0.2830). On the test set, MORAD outperforms RiboDiffusion, gRNAde, and RDesign across tertiary structural accuracy, secondary-structure pairing, and thermodynamic quality, establishing a new state of the art in structure-conditioned RNA inverse design.

Scaling generalist vision-language-action (VLA) policies is severely bottlenecked by the inherent heterogeneity of embodied data, which spans diverse robot morphologies, camera configurations, and low-level action spaces. Existing paradigms typically address this mismatch through explicit action retargeting, human-to-robot video synthesis, or dataset-specific adaptation branches, fundamentally hindering the joint learning of a unified policy. We introduce UCAG-P, a camera-centric unified action formulation that structurally aligns heterogeneous embodied datasets into a shared geometric action space. Rather than treating robot-specific commands as the shared policy target, UCAG-P represents manipulation through camera-observable anchor motion in image and camera-frame coordinates, treating robot arms, humanoids, and human hands as different embodiments of a common action schema. A geometry-conditioned action translator combines predicted motion with target-embodiment kinematics to produce executable controls. The resulting decoupled architecture allows a shared VLA policy to learn transferable manipulation geometry while retaining embodiment-specific controllability. UCAG-P is trained on 4.03K hours of robot and simulation data and 2.34K hours of human demonstrations. A single checkpoint reaches 98.3% on LIBERO, 88.7% and 89.2% on RoboTwin Easy and Hard, 82.0% zero-shot on LIBERO-Plus, and 62.0% on RoboCasa GR-1, without benchmark-specific fine-tuning.

Generative models have advanced image-conditioned 3D content creation, yet generating controllable and executable 3D scenes from a single image remains challenging. Existing 3D generative approaches can synthesize visually plausible objects and scenes, but their spatial layout estimation is coupled with specific asset generators. They struggle to jointly model object semantics, metric geometry, and scene-level spatial relationships, which are essential for interactive editing, physical simulation, and embodied applications. We propose Fysiverse-3D-Vision, a unified vision-language-geometry framework for generative 3D scene reconstruction and executable asset construction from a single image. We establish a shared representation where spatial reasoning and geometric reconstruction mutually enhance each other, allowing object layouts to be inferred beyond the constraints of individual asset generators. Our model integrates textual supervision, semantic visual cues, and geometric representations within a unified Transformer to capture scene context, metric geometry, and object-level interactions. An object-conditioned layout module performs cross-attention between target object representations and global geometric features to predict object translation, rotation, and scale. Training progressively learns geometry-language alignment, introduces layout reasoning while preserving reconstruction capability, and refines physical consistency through collision-aware optimization. By separating spatial layout reasoning from asset synthesis, Fysiverse-3D-Vision provides an adaptable interface for interactive scene editing, object-level manipulations, and executable 3D content generation. Experiments demonstrate that our framework achieves superior geometric consistency, layout estimation, rendering quality, and physical property understanding compared with existing approaches.

Depth-of-field control is a fundamental tool in photography, yet post-capture bokeh editing from a single image remains challenging. A practical editor should handle images captured under arbitrary focus and aperture settings. Existing methods typically assume an all-in-focus input, or first recover an all-in-focus image before rendering new bokeh. Such pipelines can discard useful blur cues from the source image and propagate reconstruction artifacts into the final edit. We introduce AnyBokeh, a physics-guided framework for any-to-any bokeh editing. Instead of treating source blur merely as a degradation to be removed, AnyBokeh estimates the source blur state with a signed circle-of-confusion map and a disparity map. By modeling the linear relation between signed circle of confusion and disparity difference, AnyBokeh estimates a source-specific optical fingerprint and transfers the source optical characteristics to the desired focus and aperture setting. A generative editor conditioned on both source and target circle-of-confusion maps then performs relative blur synthesis, enabling spatially adaptive deblurring, preservation, and defocus rendering. To support physically supervised learning, we further construct a high-fidelity synthetic dataset with accurate depth, focus distance, and full EXIF metadata. Experiments on real-world benchmarks show that AnyBokeh achieves faithful and controllable editing across any-to-any bokeh editing, all-in-focus-to-bokeh rendering, and defocus deblurring, while avoiding all-in-focus reconstruction and test-time bokeh-level calibration commonly required by existing approaches. The code and dataset will be available at https://github.com/itsmag11/AnyBokeh.

Current computational approaches for drug design typically focus on generating molecules conditioned on specific targets or general molecular properties, often neglecting the influence of disease context on target behavior and therapeutic outcomes. To address this gap, we introduce DrugGen-2, a novel generative model that designs small molecules conditioned on both disease ontology and target protein sequences. DrugGen-2 was developed by fine-tuning a pre-trained GPT-2 model on a curated dataset of approved drugs linked to their diseases and targets, using a two-step strategy of supervised fine-tuning followed by reinforcement learning via group relative policy optimization (GRPO). This process was guided by reward functions optimizing for chemical validity, novelty, diversity, and high predicted binding affinity. When evaluated on five protein targets relevant to diabetic nephropathy, DrugGen-2 significantly outperformed baseline models (DrugGPT and DrugGen). It demonstrated a superior capacity to generate unique molecules, exhibited greater structural similarity to approved drugs, and achieved improved predicted binding affinities across all targets. Molecular docking analyses further supported these findings, identifying candidate ligands with strong binding potential, including compounds with predicted affinities (-9.917, -9.485, and -9.367) exceeding those of reference drugs such as enalapril for angiotensin-converting enzyme (-8.283). By integrating disease-specific context into molecular generation, DrugGen-2 advances AI-assisted drug discovery, offering a powerful tool for de novo design and drug repurposing that accounts for the complex interplay between diseases and molecular targets.

Word alignment, which aims to align translationally equivalent words between source and target sentences, plays an important role in many natural language processing tasks. Current unsupervised neural alignment methods focus on inducing alignments from neural machine translation models, which does not leverage the full context in the target sequence. In this paper, we propose Mask-Align, a self-supervised word alignment model that takes advantage of the full context on the target side. Our model masks out each target token and predicts it conditioned on both source and the remaining target tokens. This two-step process is based on the assumption that the source token contributing most to recovering the masked target token should be aligned. We also introduce an attention variant called leaky attention, which alleviates the problem of unexpected high cross-attention weights on special tokens such as periods. Experiments on four language pairs show that our model outperforms previous unsupervised neural aligners and obtains new state-of-the-art results.

Recent advances in diffusion models have brought remarkable visual fidelity to instruction-guided image editing. However, their global denoising process inherently entangles the edited region with the entire image context, leading to unintended spurious modifications and compromised adherence to editing instructions. In contrast, autoregressive models offer a distinct paradigm by formulating image synthesis as a sequential process over discrete visual tokens. Their causal and compositional mechanism naturally circumvents the adherence challenges of diffusion-based methods. In this paper, we present VAREdit, a visual autoregressive (VAR) framework that reframes image editing as a next-scale prediction problem. Conditioned on source image features and text instructions, VAREdit generates multi-scale target features to achieve precise edits. A core challenge in this paradigm is how to effectively condition the source image tokens. We observe that finest-scale source features cannot effectively guide the prediction of coarser target features. To bridge this gap, we introduce a Scale-Aligned Reference (SAR) module, which injects scale-matched conditioning information into the first self-attention layer. VAREdit demonstrates significant advancements in both editing adherence and efficiency. On standard benchmarks, it outperforms leading diffusion-based methods by 30\%+ higher GPT-Balance score. Moreover, it completes a 512times512 editing in 1.2 seconds, making it 2.2times faster than the similarly sized UltraEdit. The models are available at https://github.com/HiDream-ai/VAREdit.

We frame embedding inversion as conditional masked diffusion, recovering all tokens in parallel through iterative denoising rather than sequential autoregressive generation. A masked diffusion language model is conditioned on the target embedding via adaptive layer normalization, requiring only 8 forward passes through a 78M parameter model with no access to the target encoder. On 32-token sequences across three embedding models, the method achieves 81.3% token accuracy and 0.87 cosine similarity.

Multimodal retail agents should not only recognize what a customer is doing, but also decide whether and how to assist before an explicit request is made. We study this setting through the See--Infer--Intervene (SII) framework, where a device must see pre-interaction behavior, infer latent customer intent, and act by selecting an appropriate service intervention or choosing to wait. We instantiate SII with the Proactive Intent World Model (PIWM), which represents customer state with AIDA (Attention, Interest, Desire, Action) purchasing phases and BDI (belief, desire, intention) psychological fields, predicts action-conditioned intent transitions, and selects from five response classes: Greet, Elicit, Inform, Recommend, and Hold. We further construct GuidanceSalesBench, a smart-retail benchmark containing state manifests, pre-interaction videos, candidate responses, action-conditioned outcomes, and best-action labels. When conditioned on ground-truth customer state to isolate action selection, PIWM achieves 0.641 macro F1 on 30 held-out target videos, outperforming a zero-shot Qwen2.5-VL-7B baseline and training variants without balanced action supervision; end-to-end video-only selection drops to 0.295, below the 5-class balanced random baseline of 0.414, identifying video-to-state grounding as the dominant deployment-time bottleneck. A preliminary staged real-store pilot (recorded with paid participants performing scripted customer behaviors) reaches 0.579 action macro F1 on 20 fully annotated videos, with 10 additional accessible videos released with index-level labels.

Generated images often have coherent layouts and visual content, yet local errors in small text and complex characters still limit their readability and practical use. Scene-text refinement requires accuracy, preservation, and efficiency. Existing methods based on variational autoencoders (VAEs) can lose fine strokes during reconstruction, while full-image editing can shift background colors. In this work, we introduce PixText, a model that formulates local text refinement as grouped image generation in pixel space. Conditioned on the original image, PixText generates only the target regions, preserves unedited content, and uses MeanFlow for four-step generation. We further introduce Text Refinement Bench to evaluate text correction and image preservation in generated images. On this benchmark, PixText achieves 83.06% glyph pass and 94.66% exact target-character OCR accuracy, versus 36.77% and 52.31% for the strongest baseline. Its four-step MeanFlow variant retains an 81.84% pass rate with less than one GPU-second of amortized generation cost per image.

Generative Flow Networks (GFlowNets) have recently emerged as a suitable framework for generating diverse and high-quality molecular structures by learning from rewards treated as unnormalized distributions. Previous works in this framework often restrict exploration by using predefined molecular fragments as building blocks, limiting the chemical space that can be accessed. In this work, we introduce Atomic GFlowNets (A-GFNs), a foundational generative model leveraging individual atoms as building blocks to explore drug-like chemical space more comprehensively. We propose an unsupervised pre-training approach using drug-like molecule datasets, which teaches A-GFNs about inexpensive yet informative molecular descriptors such as drug-likeliness, topological polar surface area, and synthetic accessibility scores. These properties serve as proxy rewards, guiding A-GFNs towards regions of chemical space that exhibit desirable pharmacological properties. We further implement a goal-conditioned finetuning process, which adapts A-GFNs to optimize for specific target properties. In this work, we pretrain A-GFN on a subset of ZINC dataset, and by employing robust evaluation metrics we show the effectiveness of our approach when compared to other relevant baseline methods for a wide range of drug design tasks. The code is accessible at https://github.com/diamondspark/AGFN.

Recent advances in Vision-Language-Action (VLA) models have enabled robotic agents to integrate multimodal understanding with action execution. However, our empirical analysis reveals that current VLAs struggle to allocate visual attention to target regions. Instead, visual attention is always dispersed. To guide the visual attention grounding on the correct target, we propose ReconVLA, a reconstructive VLA model with an implicit grounding paradigm. Conditioned on the model's visual outputs, a diffusion transformer aims to reconstruct the gaze region of the image, which corresponds to the target manipulated objects. This process prompts the VLA model to learn fine-grained representations and accurately allocate visual attention, thus effectively leveraging task-specific visual information and conducting precise manipulation. Moreover, we curate a large-scale pretraining dataset comprising over 100k trajectories and 2 million data samples from open-source robotic datasets, further boosting the model's generalization in visual reconstruction. Extensive experiments in simulation and the real world demonstrate the superiority of our implicit grounding method, showcasing its capabilities of precise manipulation and generalization. Our project page is https://zionchow.github.io/ReconVLA/.

Understanding how cellular morphology, gene expression, and spatial context jointly shape tissue function is a central challenge in biology. Image-based spatial transcriptomics technologies now provide high-resolution measurements of cell images and gene expression profiles, but existing methods typically analyze these modalities in isolation or at limited resolution. We address the problem by introducing SPATIA, a multi-level generative and predictive model that learns unified, spatially aware representations by fusing morphology, gene expression, and spatial context from the cell to the tissue level. SPATIA also incorporates a spatially conditioned generative framework with confidence-aware OT reweighting and morphology-profile alignment for modeling target-state morphology distributions. Specifically, we propose a confidence-aware flow matching objective that reweights weak optimal-transport pairs based on uncertainty. We further apply morphology-profile alignment to encourage biologically meaningful image generation, enabling the modeling of microenvironment-dependent phenotypic transitions. We assembled a multi-scale dataset consisting of 25.9 million cell-gene pairs across 17 tissues. We benchmark SPATIA against 18 models across 12 tasks, spanning categories such as phenotype generation, annotation, clustering, gene imputation, and cross-modal prediction. SPATIA achieves improved performance over state-of-the-art models, improving generative fidelity by 8% and predictive accuracy by up to 3%.

Visual object tracking has gained promising progress in past decades. Most of the existing approaches focus on learning target representation in well-conditioned daytime data, while for the unconstrained real-world scenarios with adverse weather conditions, e.g. nighttime or foggy environment, the tremendous domain shift leads to significant performance degradation. In this paper, we propose UMDATrack, which is capable of maintaining high-quality target state prediction under various adverse weather conditions within a unified domain adaptation framework. Specifically, we first use a controllable scenario generator to synthesize a small amount of unlabeled videos (less than 2% frames in source daytime datasets) in multiple weather conditions under the guidance of different text prompts. Afterwards, we design a simple yet effective domain-customized adapter (DCA), allowing the target objects' representation to rapidly adapt to various weather conditions without redundant model updating. Furthermore, to enhance the localization consistency between source and target domains, we propose a target-aware confidence alignment module (TCA) following optimal transport theorem. Extensive experiments demonstrate that UMDATrack can surpass existing advanced visual trackers and lead new state-of-the-art performance by a significant margin. Our code is available at https://github.com/Z-Z188/UMDATrack.

Visual goal and dynamics prediction can provide language-conditioned robot policies with both a target outcome and a representation of action-dependent scene changes. We bring these predictions into action generation and selection through a shared trajectory model. Dynin-Robotics implements this formulation on Dynin-Omni, an omnimodal masked-diffusion backbone, representing language, visual observations, goals, and actions as discrete tokens. By varying conditioning and target spans, the same model learns action prediction, action-conditioned next-observation prediction, terminal goal-state prediction, and trajectory-to-instruction reconstruction. These interfaces support test-time scaling through goal prediction, action-candidate evaluation, and joint refinement of action and future-state predictions. We continually pretrain the model on approximately 1.33 million trajectories from 48 Open X-Embodiment datasets and adapt it separately to downstream domains. On two VLABench tasks, robot pretraining improves adaptation within a fixed Stage-2 step budget, and the full objective mixture improves shifted-instruction success over Policy-only post-training under the same coupled decoder. Combining goal guidance with joint action-next-state denoising further improves shifted-instruction success over action-only decoding; the benefit depends on how the predictions are composed. Dynin-Robotics achieves competitive performance on LIBERO and zero-shot LIBERO-Plus, together with a 78.4% average success rate across four manipulation conditions on a Franka Research 3 robot. An optimized block-parallel implementation accelerates model-side action decoding by up to 29.2x relative to the base implementation under the reported profiling setup. These results support shared trajectory modeling as a common interface for learning complementary robot objectives and composing their predictions during control.

A central capability of embodied agents is to accomplish complex objectives through sequences of interdependent tasks. Yet existing visual goal-conditioned policies underlying these agents are typically evaluated on isolated interactions where the target is already visible, and thus do not capture the conditions that arise during continuous long-horizon task execution. In such settings, each task begins from the state left by the previous one: the agent may end at a different position and orientation, the world may have been modified, and the next interaction target may lie outside the current field of view. As a result, agents relying on such policies may struggle to proceed to the next task when they cannot ground their target in the current observation. To address this challenge, we propose Attacca, a new approach that trains visual goal-conditioned policies on complete search-to-interact trajectories using goal images decoupled from the execution environment. Attacca uses context-decoupled goal sampling to pair each demonstration with a class-compatible masked goal image from another world, removing direct scene and pose correspondence. It learns dense current-view grounding through a target-mask prediction head, providing auxiliary supervision beyond action imitation. We further introduce behavioral-phase conditioning that teaches the policy to distinguish Search, Approach, and Interact stages and adapt its control as execution progresses. We evaluate Attacca on multiple short- and long-horizon embodied tasks in Minecraft. Our method achieves 39.0-47.5% clean success, improving over the strongest baseline by 1.7-2.4x. On long-horizon tasks, it attains 54%, 30%, and 28% completion, yielding up to a 7x improvement.

Neural captioners are typically trained to mimic human-generated references without optimizing for any specific communication goal, leading to problems such as the generation of vague captions. In this paper, we show that fine-tuning an out-of-the-box neural captioner with a self-supervised discriminative communication objective helps to recover a plain, visually descriptive language that is more informative about image contents. Given a target image, the system must learn to produce a description that enables an out-of-the-box text-conditioned image retriever to identify such image among a set of candidates. We experiment with the popular ClipCap captioner, also replicating the main results with BLIP. In terms of similarity to ground-truth human descriptions, the captions emerging from discriminative finetuning lag slightly behind those generated by the non-finetuned model, when the latter is trained and tested on the same caption dataset. However, when the model is used without further tuning to generate captions for out-of-domain datasets, our discriminatively-finetuned captioner generates descriptions that resemble human references more than those produced by the same captioner without finetuning. We further show that, on the Conceptual Captions dataset, discriminatively finetuned captions are more helpful than either vanilla ClipCap captions or ground-truth captions for human annotators tasked with an image discrimination task.

We propose a simple yet effective pipeline for stylizing a 3D scene, harnessing the power of 2D image diffusion models. Given a NeRF model reconstructed from a set of multi-view images, we perform 3D style transfer by refining the source NeRF model using stylized images generated by a style-aligned image-to-image diffusion model. Given a target style prompt, we first generate perceptually similar multi-view images by leveraging a depth-conditioned diffusion model with an attention-sharing mechanism. Next, based on the stylized multi-view images, we propose to guide the style transfer process with the sliced Wasserstein loss based on the feature maps extracted from a pre-trained CNN model. Our pipeline consists of decoupled steps, allowing users to test various prompt ideas and preview the stylized 3D result before proceeding to the NeRF fine-tuning stage. We demonstrate that our method can transfer diverse artistic styles to real-world 3D scenes with competitive quality.

Sign language translation (SLT) is challenging, as it involves converting sign language videos into natural language. Previous studies have prioritized accuracy over diversity. However, diversity is crucial for handling lexical and syntactic ambiguities in machine translation, suggesting it could similarly benefit SLT. In this work, we propose DiffSLT, a novel gloss-free SLT framework that leverages a diffusion model, enabling diverse translations while preserving sign language semantics. DiffSLT transforms random noise into the target latent representation, conditioned on the visual features of input video. To enhance visual conditioning, we design Guidance Fusion Module, which fully utilizes the multi-level spatiotemporal information of the visual features. We also introduce DiffSLT-P, a DiffSLT variant that conditions on pseudo-glosses and visual features, providing key textual guidance and reducing the modality gap. As a result, DiffSLT and DiffSLT-P significantly improve diversity over previous gloss-free SLT methods and achieve state-of-the-art performance on two SLT datasets, thereby markedly improving translation quality.

Semantic control entails steering LM generations towards satisfying subtle non-lexical constraints, e.g., toxicity, sentiment, or politeness, attributes that can be captured by a sequence-level verifier. It can thus be viewed as sampling from the LM distribution conditioned on the target attribute, a computationally intractable problem due to the non-decomposable nature of the verifier. Existing approaches to LM control either only deal with syntactic constraints which cannot capture the aforementioned attributes, or rely on sampling to explore the conditional LM distribution, an ineffective estimator for low-probability events. In this work, we leverage a verifier's gradient information to efficiently reason over all generations that satisfy the target attribute, enabling precise steering of LM generations by reweighing the next-token distribution. Starting from an initial sample, we create a local LM distribution favoring semantically similar sentences. This approximation enables the tractable computation of an expected sentence embedding. We use this expected embedding, informed by the verifier's evaluation at the initial sample, to estimate the probability of satisfying the constraint, which directly informs the update to the next-token distribution. We evaluated the effectiveness of our approach in controlling the toxicity, sentiment, and topic-adherence of LMs yielding generations satisfying the constraint with high probability (>95%) without degrading their quality.

State-of-the-art text-to-image models produce visually impressive results but often struggle with precise alignment to text prompts, leading to missing critical elements or unintended blending of distinct concepts. We propose a novel approach that learns a high-success-rate distribution conditioned on a target prompt, ensuring that generated images faithfully reflect the corresponding prompts. Our method explicitly models the signal component during the denoising process, offering fine-grained control that mitigates over-optimization and out-of-distribution artifacts. Moreover, our framework is training-free and seamlessly integrates with both existing diffusion and flow matching architectures. It also supports additional conditioning modalities -- such as bounding boxes -- for enhanced spatial alignment. Extensive experiments demonstrate that our approach outperforms current state-of-the-art methods. The code is available at https://github.com/grimalPaul/gsn-factory.

Auto-bidding systems aim to maximize advertiser value over long horizons under budget constraints and ratio targets such as cost-per-acquisition, yet future traffic and auction dynamics are non-stationary and uncertain. Existing approaches face distinct limitations: control-based pacing reacts to deviations but cannot anticipate future conditions, while RL and generative methods fold constraints into reward signals, obscuring violations and degrading under distribution shift. We shift the learning target from actions to responses with the Generative Response Model (GRM), a history-conditioned sequence model that jointly predicts future traffic volume and horizon-aggregate cost/value curves as functions of a single bid multiplier. We show that under mild monotonicity conditions, the optimality gap relative to full per-tick control is bounded by the dispersion of per-tick marginal value-per-cost. Given predicted responses, a lightweight analytic controller enforces each active constraint via a 1D root-finding step. We prove this controller is exact for the single-multiplier problem and bound constraint violations under receding-horizon replanning in terms of prediction error. Experiments on AuctionNet show that GRM improves constraint stability and overall score compared to existing baselines.

Autonomous robots often need to move their camera before they can act: to inspect an object, reveal an occluded region, or obtain a view that responds to a user's intent. While vision-language navigation translates instructions to base motion and vision-language-action policies map instructions to manipulation actions, language-conditioned camera motion remains comparatively underexplored as a first-class action. We formulate language-conditioned camera motion generation: given a current RGB observation and a free-form natural-language intent, predict a relative target camera pose for the next observation. This task is inherently non-trivial: viewpoint changes are driven by latent perceptual intentions, and a valid motion may operate at different semantic granularity, from entering a room to looking around a corner, inspecting a visible object, or revealing an occluded detail. To model this structure, we mine multi-intention camera-motion supervision from egocentric video, pairing plausible intents and observation-gain descriptions with relative SE(3) target poses. We propose LIME, a vision-language camera-motion generator that combines an auto-regressive observation-gain output with a continuous flow-matching pose head. This design lets the model jointly predict what the next view should reveal while representing multi-hypothesis target views. Across experiments and downstream robotic tasks, we show that LIME can learn to actively choose camera poses from passive human video, turning ordinary egocentric recordings into supervision for intent-aware active perception.

Mobility simulation supports logistics, safety, and communications planning in industrial environments such as ports, mines, and airports. Existing trajectory models, however, rely on absolute coordinates, road-network tokens, or semantic zones: representations that are site-specific and not well suited to unstructured industrial terrain. We introduce the Industrial Kinematic Trajectory Model (IKTM), a coordinate-free trajectory generator that represents industrial vehicle motion through kinematic sequences (speed and heading change) with no absolute spatial reference. IKTM uses an autoregressive causal transformer with probabilistic mixture heads and extends our prior coordinate-free Markovian model with deep sequence modelling and an explicit duration-conditioning signal. Trained on one site and evaluated zero-shot on three unseen sites, it matches the small-turn shape of the empirical turn-rate distributions of held-out telematics; across all four sites, the per-site mean Jensen-Shannon divergence over 100 sampling seeds spans approximately 0.035-0.050 bits under an oracle-length duration-target protocol and approximately 0.032-0.042 bits under a fully zero-shot prior-length protocol, with similar ranges whether out-of-distribution (OOD) duration targets are drawn from each held-out site's empirical length distribution or from the Site A prior. Both protocols stay above the metric's sampling-noise floor (<=0.0049 bits). Paired by site, the oracle-length values are 5.3-6.0x lower than those of a re-implementation of our prior Markovian model under the same 1 Hz protocol. Termination is duration-conditioned rather than spatial: rollouts stop on 100% of trials with a length-tracking error of +0.0 +/- 0.0 s against the sampled target (100 of 100 exactly on target; N=100, T=0.2, untouched in-distribution test split).

Speech-guided referring video object segmentation aims to recover the mask tracks of objects specified by a spoken motion description. Here, speech carries a linguistic instruction rather than acoustic evidence from a sounding object, so a solution must connect speech recognition, motion-centric temporal grounding, mask tracking, and explicit no-target handling. We introduce Speech2MaskTrack, our approach for the MeViS-Audio track of the 8th LSVOS Challenge. Speech2MaskTrack transcribes the spoken query and compiles it into structured constraints over category, count, direction, interaction role, and temporal phase. SAM3.1 enumerates multiple instance tracks, which TRACE ranks using complete-trajectory motion and relation evidence. A frozen lexical presence gate may suppress the ranked SAM3.1 base prediction. When the gate predicts that a target is present, an available full-expression-conditioned SaSaSa2VA track replaces the SAM3.1 mask. Only outputs that remain empty enter GPT-assisted recovery, which invokes SaSaSa2VA again under query- and mask-level verification. Speech2MaskTrack achieved second place in the official challenge ranking.

Universal Multimodal embedding models built on Multimodal Large Language Models (MLLMs) have traditionally employed contrastive learning, which aligns representations of query-target pairs across different modalities. Yet, despite its empirical success, they are primarily built on a "single-turn" formulation where each query-target pair is treated as an independent data point. This paradigm leads to computational inefficiency when scaling, as it requires a separate forward pass for each pair and overlooks potential contextual relationships between multiple queries that can relate to the same context. In this work, we introduce Multi-Turn Contrastive Learning (MuCo), a dialogue-inspired framework that revisits this process. MuCo leverages the conversational nature of MLLMs to process multiple, related query-target pairs associated with a single image within a single forward pass. This allows us to extract a set of multiple query and target embeddings simultaneously, conditioned on a shared context representation, amplifying the effective batch size and overall training efficiency. Experiments exhibit MuCo with a newly curated 5M multimodal multi-turn dataset (M3T), which yields state-of-the-art retrieval performance on MMEB and M-BEIR benchmarks, while markedly enhancing both training efficiency and representation coherence across modalities. Code and M3T are available at https://github.com/naver-ai/muco

We formalize action emergence as a target capability for end-to-end autonomous driving: the ability to generate physically feasible, semantically appropriate, and safety-compliant actions in arbitrary, long-tail traffic scenes through scene-conditioned reasoning rather than retrieval or interpolation of learned scene-action mappings. We show that previous paradigms cannot deliver action emergence: autoregressive trajectory decoders collapse the inherently multimodal future into a single averaged output, while diffusion and flow-matching generators express multimodality but are not steerable by reasoned intent. We propose Streaming Intent as a concrete way to approach action emergence: a mechanism that makes driving intent (i) semantically streamed through a continuous chain-of-thought that causally derives the intent from scene understanding, and (ii) temporally streamed across clips so that intent commitments remain coherent along the driving horizon. We realize Streaming Intent in a VLA model we call SI (Streaming Intent). SI autoregressively decodes a four-step chain-of-thought and emits an intent token; the decoded intent then drives classifier-free guidance (CFG) on a flow-matching action head, requiring only two denoising steps to generate the final trajectory. On the Waymo End-to-End benchmark, SI achieves competitive aggregate performance, with an RFS score of 7.96 on the validation set and 7.74 on the test set. Beyond aggregate metrics, the model demonstrates -- to our knowledge for the first time in a fully end-to-end VLA -- intent-faithful controllability: for a fixed scene, varying the intent class at inference yields qualitatively distinct yet consistently high-quality plans, arising purely from data-driven learning without any pre-built trajectory bank or hand-coded post-hoc selector.

Multimodal large language models (MLLMs) and diffusion models have each reached remarkable maturity: MLLMs excel at reasoning over heterogeneous multimodal inputs with strong semantic grounding, while diffusion models synthesize images and videos with photorealistic fidelity. We argue that these two families can be unified through a simple division of labor: MLLMs perform semantic planning, while diffusion models render pixels from high-level semantic guidance and low-level visual features. Building on this idea, we propose Bernini, a unified framework for video generation and editing. An MLLM-based planner predicts the target semantic representation directly in the ViT embedding space, and a DiT-based renderer synthesizes pixels conditioned on this plan, augmented by text features and, for editing, source VAE features for detail preservation. Because semantics serve as the interface, the planner and renderer can be trained separately and only lightly co-trained, preserving the pretrained strengths of both components while keeping training efficient. To better handle multiple visual inputs, we introduce Segment-Aware 3D Rotary Positional Embedding (SA-3D RoPE), and further incorporate chain-of-thought reasoning in the planner to better transfer understanding into generation. Bernini achieves state-of-the-art performance across a wide range of video generation and editing benchmarks, with the MLLM's pretrained understanding translating into strong generalization on challenging editing tasks.

Online egocentric gaze estimation predicts where a camera wearer is looking from first-person video using only past and current frames, a task essential for augmented reality and assistive technologies. Unlike third-person gaze estimation, this setting lacks explicit head or eye signals, requiring models to infer current visual attention from sparse, indirect cues such as hand-object interactions and salient scene content. We observe that gaze exhibits strong temporal continuity during goal-directed activities: knowing where a person looked recently provides a powerful prior for predicting where they look next. Inspired by vision-conditioned autoregressive decoding in vision-language models, we propose ARGaze, which reformulates gaze estimation as sequential prediction: at each timestep, a transformer decoder predicts current gaze by conditioning on (i) current visual features and (ii) a fixed-length Gaze Context Window of recent gaze target estimates. This design enforces causality and enables bounded-resource streaming inference. We achieve state-of-the-art performance across multiple egocentric benchmarks under online evaluation, with extensive ablations validating that autoregressive modeling with bounded gaze history is critical for robust prediction. We will release our source code and pre-trained models.

Embodied visual tracking (EVT) requires a mobile agent to continuously follow a specific target described in natural language using only onboard vision. While recent vision-language-action (VLA) policies unify target identification and trajectory planning, their chain-of-thought (CoT) reasoning often operates in abstract spatial latents that are difficult to supervise and weakly aligned with explicit image-space detections. To address this, we introduce ReferTrack, a referring-then-tracking paradigm that grounds EVT using a single forward-facing camera. Our model first selects the target from an indexed set of bounding boxes, then decodes tracking waypoints conditioned on this image-grounded decision. To preserve target motion cues over time, ReferTrack maintains a sliding-window queue of previously selected bounding boxes, injecting their geometric features into the visual history via temporal-viewpoint-bbox indicator (TVBI) tokens. We further enhance target identification by co-training on a custom Refer-QA dataset. On EVT-Bench, ReferTrack achieves state-of-the-art single-view performance with success rates of 89.4%, 73.3%, and 74.1% on the single-target, distracted, and ambiguity tracking splits, respectively -- matching or even surpassing several multi-camera baselines on identification-heavy tasks. Finally, real-world deployments on legged and humanoid robots validate its robust sim-to-real transfer capabilities. Code is available at https://github.com/MedlarTea/referTrack.