new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Nov 20

AIRoA-0: Long-Horizon, Precise, Cross-Embodiment Manipulation from Handheld Data

AIRoA-0 (A-0) is a bimanual manipulation system learned from 16,151 hours of handheld demonstrations, with no robot data collected at any stage. The demonstrations are recorded with YUBI, our open-source handheld gripper, which lets people record manipulation data anywhere with no robot present. From a single instruction, A-0 sorts more than a dozen small parts into their numbered cells and changes the mop pads and brush of a robot vacuum; among other tasks, it unzips a pencil case and folds a towel. It performs these tasks using only a camera on each wrist, with no head or scene camera, at a site where none of its training data was recorded. Across the ten tasks of our evaluation, it averages a success rate of 78%, against 27% for the strongest of four other vision-language-action models post-trained on the same task demonstrations. We collect no teleoperation data and use no reinforcement learning or on-robot corrections, and the robot appears only at test time. The system learns which regions of each wrist view matter for the task, predicts the stage the task has reached, and decodes actions as a continuous stream. A-0 is embodiment-agnostic: it runs on robots that mount the YUBI gripper, such as a bimanual Franka, TX-G2, OpenArm and UR. We are releasing the dataset, to our knowledge the largest open dataset of handheld-gripper demonstrations with task and subtask instructions, together with the pre-trained weights and the post-training recipe. Videos of A-0 on every task are on the project page, https://a-0.airoa.io. Anyone can build the gripper, record a task of their own and post-train the model on it in under four hours on a single node of eight H200 GPUs.

  • 20 authors
·
Nov 1

Reverse to Advance: Teleoperation-Cost Effective Hard Policy Learning from Reversed Easy Tasks

High-quality teleoperation datasets are costly to collect, particularly for hard tasks. We observe that many tasks exhibit directional asymmetry: completing the forward hard task is difficult, whereas reversing it by relaxing or disrupting the environment is comparatively easy. This suggests that reversed easy-task trajectories can serve as a scalable supervision signal for the hard task, reducing the cost of manual demonstration collection. However, reversed data can be noisy, and directly training on it may yield suboptimal policies. To enable largely automated acquisition and effective use of reversed data, we propose a teleoperation-cost effective framework for hard policy learning via temporal reversal of easy tasks, consisting of three key components: a closed-loop data collection pipeline that alternates between hard-task and easy-task policies to autonomously reset the environment and generate diverse trajectories; a hierarchical data refinement pipeline that temporally inverts easy-task rollouts and filters low-quality motion using kinematic priors and a critic-guided advantage filter; and an iterative policy learning method that trains the hard-task policy using both initial reversed easy-task demonstrations and the filtered reversed data in a continuous online learning loop. By combining automated collection, hierarchical refinement, and iterative learning, our method enables scalable, reliable training of complex, high-precision manipulation tasks. Across two simulated benchmarks and real-robot experiments, we demonstrate that our method improves hard-task success rates with higher data efficiency and more stable training compared to reversal-based and reinforcement-learning baselines, without requiring extensive hard-task teleoperation.

  • 4 authors
·
Jul 14

VAG: Dual-Stream Video-Action Generation for Embodied Data Synthesis

Recent advances in robot foundation models trained on large-scale human teleoperation data have enabled robots to perform increasingly complex real-world tasks. However, scaling these systems remains difficult because collecting task-specific demonstrations is expensive and labor-intensive. Synthetic data, especially generated videos, offer a promising direction, but existing World Models (WMs) are not directly suitable for policy learning since they do not provide paired action trajectories. World-Action (WA) models partially address this by predicting actions with visual outputs, yet often lack strong video-action alignment, while two-stage pipelines that generate video first and then infer actions introduce inefficiency and error accumulation. To address these limitations, we propose VAG, a unified flow-matching-based dual-stream framework that jointly generates video and action under visual and language conditioning. By synchronizing denoising in both branches and using an adaptive 3D pooling mechanism to transfer compact global video context to the action branch, VAG improves cross-modal consistency during generation. Across both simulated and real-world settings, VAG produces aligned video-action pairs with competitive prediction quality, supports executable trajectory replay, and provides useful synthetic pretraining data that improves downstream policy generalization, indicating its potential as a practical world-action model for embodied data synthesis.

  • 13 authors
·
Apr 9

Pose6DAug: Physically Plausible Multi-view Object Swapping for Robot Data Augmentation

Vision-language-action (VLA) policies have shown strong potential for general-purpose manipulation, yet they often fail on novel, out-of-distribution objects whose appearance or geometry deviates from the training distribution. The standard remedy is to collect multi-view teleoperation data for every failure case, but this scales poorly in both cost and time. We introduce Pose6DAug, a failure-driven data augmentation framework that turns a policy's own successful episodes into targeted demonstrations for its failure modes, without any new data collection. Our key insight is that each successful episode already encodes a physically valid action trajectory together with calibrated multi-view observations. By swapping only the manipulated object while preserving this trajectory, we obtain new and physically grounded demonstrations. However, naive 2D video editing breaks multi-view consistency and physical plausibility, particularly under heavy occlusion and egocentric viewpoints. Our method instead operates directly in 3D, anchoring the target object with an explicit mesh driven by a temporally coherent 6D pose trajectory, ensuring geometrically consistent renderings across all camera views. Fine-tuning a VLA on data augmented by our method improves success rates by 16.5% relative to the state-of-the-art baseline on novel objects, while preserving in-distribution performance. These results show that multi-view and physically consistent augmentation is a practical path to scalable VLA generalization.

  • 5 authors
·
Jun 17

OASIS: From Simulation Data Collection to Real-World Humanoid Loco-Manipulation

Recent progress in robot manipulation has been largely driven by learning from large-scale demonstrations. For humanoid robot loco-manipulation tasks, however, existing data sources force an unsatisfying tradeoff between trajectory quality and scalability. Real-world teleoperation provides the highest-quality trajectories but requires dedicated physical space and time-consuming scene resets. Simulation offers an alternative way out of this dilemma: it can produce clean, embodiment-aligned data at scale without any physical hardware. In this paper, we propose OASIS, a simulation-data-driven framework for humanoid loco-manipulation. OASIS automatically reconstructs realistic object assets from real-world images using a 3D generative model. Based on these assets, trajectories are first collected through teleoperation in simulation, and then augmented under diverse domain randomizations in a post-processing stage. With the resulting simulation data, we further design a hierarchical visuomotor policy for humanoid loco-manipulation. Extensive experiments on the real humanoid robot show that, under zero-shot deployment, the policy trained on our simulation data achieves higher success rates on most tasks than that trained on real-robot teleoperation data, owing largely to the broad lighting and environmental variations covered by our simulation rendering, which real-robot data fails to capture. The project page is available at https://oasis-humanoid.github.io/.

  • 7 authors
·
Jun 6 2

Wh0: Generative World Models as Scalable Sources of Egocentric Human Hand Manipulation Data

Scaling dexterous manipulation requires generalization across objects, scenes, and tasks, yet existing data sources face a trade-off between scale and scene/embodiment alignment: teleoperation data is well aligned with robot deployment but expensive to collect; simulation is scalable but limited by the sim-to-real gap; and real egocentric videos scale effectively but remain misaligned with robot deployment. We propose Wh0, a framework that uses generative video world models as scalable and controllable sources of egocentric human-hand manipulation data to unlock the manipulation capabilities of pretrained dexterous VLA models. Conditioned on language, objects, and scenes, Wh0 uses a generative world model to produce WM-H, a 50k-episode dataset of egocentric human-object interaction videos. Wh0 then converts the generated videos into robot-trainable supervision through hand motion reconstruction and visual editing. Co-trained with a limited amount of real robot data, WM-H adapts pretrained VLA models to dexterous manipulation deployment. Across 18 real-world dexterous manipulation tasks, compared with a model post-trained only on robot data, Wh0 improves zero-shot success on unseen tasks from 8.3% to 38.9%. Ablation studies further show that scalable generation and scene/embodiment alignment are key drivers of performance gains. Videos and open-source code can be found on our project website: https://chenyt31.github.io/wh0.github.io/.

  • 7 authors
·
Jun 22

SimToolReal: An Object-Centric Policy for Zero-Shot Dexterous Tool Manipulation

The ability to manipulate tools significantly expands the set of tasks a robot can perform. Yet, tool manipulation represents a challenging class of dexterity, requiring grasping thin objects, in-hand object rotations, and forceful interactions. Since collecting teleoperation data for these behaviors is challenging, sim-to-real reinforcement learning (RL) is a promising alternative. However, prior approaches typically require substantial engineering effort to model objects and tune reward functions for each task. In this work, we propose SimToolReal, taking a step towards generalizing sim-to-real RL policies for tool manipulation. Instead of focusing on a single object and task, we procedurally generate a large variety of tool-like object primitives in simulation and train a single RL policy with the universal goal of manipulating each object to random goal poses. This approach enables SimToolReal to perform general dexterous tool manipulation at test-time without any object or task-specific training. We demonstrate that SimToolReal outperforms prior retargeting and fixed-grasp methods by 37% while matching the performance of specialist RL policies trained on specific target objects and tasks. Finally, we show that SimToolReal generalizes across a diverse set of everyday tools, achieving strong zero-shot performance over 120 real-world rollouts spanning 24 tasks, 12 object instances, and 6 tool categories.

EyeRobot 2.0: Active Gaze for Precise Manipulation without Wrist Cameras

Inspired by human vision, we introduce a framework using active gaze to enable fine-grained bimanual manipulation with only a single stereo camera. EyeRobot 2.0 physically attends to a 3D fixation point in the scene by swiveling two eye viewpoints to center their gaze on it. The resulting images are processed foveally by allocating more visual tokens to the image centers, focusing computation on task-relevant features. Such Active Visual Fixation (AVF) requires carefully coordinated gaze during task execution, which we accomplish hierarchically by first training a low-level gaze servoing policy conditioned on a goal object, then training a target selector which emits fixation goals based on task progress. Both modules are trained with RL on real-world data: the first is trained with a dense geometric reward and the second co-trains with the BC gripper policy which allows it to discover fixation sequences that can resemble a human's fixation sequence while performing the task. EyeRobot 2.0 further takes advantage of fixation by canonicalizing gripper information into a fixation-relative SE(3) frame, which compacts the size of the action distribution to learn. We collect teleoperation data for 7 real-world and 6 simulated tasks, and conduct over 1000 physical and 1800 simulated robot trials comparing EyeRobot 2.0 against passive stereo and ego + wrist camera policies trained on the same data. Removing wrist cameras is costly for standard policies: with only passive stereo, real-world success drops from 52% to 27%. EyeRobot 2.0 closes this gap with only stereo, outperforming passive stereo by 40% in real and 20% in sim. It matches ego + wrist policies when their wrist views are clear (69% vs. 64%), and more than doubles their success when grasped objects occlude the wrist cameras (48% vs. 22%)

Actions as Language: Fine-Tuning VLMs into VLAs Without Catastrophic Forgetting

Fine-tuning vision-language models (VLMs) on robot teleoperation data to create vision-language-action (VLA) models is a promising paradigm for training generalist policies, but it suffers from a fundamental tradeoff: learning to produce actions often diminishes the VLM's foundational reasoning and multimodal understanding, hindering generalization to novel scenarios, instruction following, and semantic understanding. We argue that this catastrophic forgetting is due to a distribution mismatch between the VLM's internet-scale pretraining corpus and the robotics fine-tuning data. Inspired by this observation, we introduce VLM2VLA: a VLA training paradigm that first resolves this mismatch at the data level by representing low-level actions with natural language. This alignment makes it possible to train VLAs solely with Low-Rank Adaptation (LoRA), thereby minimally modifying the VLM backbone and averting catastrophic forgetting. As a result, the VLM can be fine-tuned on robot teleoperation data without fundamentally altering the underlying architecture and without expensive co-training on internet-scale VLM datasets. Through extensive Visual Question Answering (VQA) studies and over 800 real-world robotics experiments, we demonstrate that VLM2VLA preserves the VLM's core capabilities, enabling zero-shot generalization to novel tasks that require open-world semantic reasoning and multilingual instruction following.

  • 5 authors
·
Sep 25, 2025

EXIMO: VLM Guided Exploration of VLA Policies

How to efficiently finetune robot policies to learn new tasks on the fly? State of the art robotic manipulation policies are based on behaviour cloning of large vision-language-action (VLA) models with billions of parameters on huge teleoperation datasets. While this simple approach has enabled significant advances for robotic manipulation, finetuning of VLA policies for learning new tasks still remains an open problem. In particular, collecting teleoperation datasets requires hundreds of hours of expensive human labour and the alternative, reinforcement learning (RL), can be notoriously sample-inefficient especially for long-horizon tasks. In addition, RL with VLAs imposes several challenges due to the model's size and architectural design. In this work, we propose EXIMO, an efficient algorithm for finetuning of VLA policies. EXIMO operates in three stages: explore, imitate, and optimize. During the explore phase, EXIMO equips the VLA with a vision language model (VLM) that acts as a planner. The VLM thinks and breaks down challenging long-horizon problems into shorter ones for the VLA. The VLM, together with the VLA, is used to collect an orchestrated dataset on new tasks. During the imitate phase, the VLA is finetuned with the orchestrated data. Finally, during the optimize stage, we use residual off-policy RL to further finetune the policy. In our experiments, we ablate all three stages of EXIMO and show that it outperforms existing approaches significantly in terms of sample-efficiency and final performance.

deepmind Deepmind
·
Aug 19 1

UniDex: A Robot Foundation Suite for Universal Dexterous Hand Control from Egocentric Human Videos

Dexterous manipulation remains challenging due to the cost of collecting real-robot teleoperation data, the heterogeneity of hand embodiments, and the high dimensionality of control. We present UniDex, a robot foundation suite that couples a large-scale robot-centric dataset with a unified vision-language-action (VLA) policy and a practical human-data capture setup for universal dexterous hand control. First, we construct UniDex-Dataset, a robot-centric dataset over 50K trajectories across eight dexterous hands (6--24 DoFs), derived from egocentric human video datasets. To transform human data into robot-executable trajectories, we employ a human-in-the-loop retargeting procedure to align fingertip trajectories while preserving plausible hand-object contacts, and we operate on explicit 3D pointclouds with human hands masked to narrow kinematic and visual gaps. Second, we introduce the Function-Actuator-Aligned Space (FAAS), a unified action space that maps functionally similar actuators to shared coordinates, enabling cross-hand transfer. Leveraging FAAS as the action parameterization, we train UniDex-VLA, a 3D VLA policy pretrained on UniDex-Dataset and finetuned with task demonstrations. In addition, we build UniDex-Cap, a simple portable capture setup that records synchronized RGB-D streams and human hand poses and converts them into robot-executable trajectories to enable human-robot data co-training that reduces reliance on costly robot demonstrations. On challenging tool-use tasks across two different hands, UniDex-VLA achieves 81% average task progress and outperforms prior VLA baselines by a large margin, while exhibiting strong spatial, object, and zero-shot cross-hand generalization. Together, UniDex-Dataset, UniDex-VLA, and UniDex-Cap provide a scalable foundation suite for universal dexterous manipulation.

  • 19 authors
·
Mar 23

ConLA: Contrastive Latent Action Learning from Human Videos for Robotic Manipulation

Vision-Language-Action (VLA) models achieve preliminary generalization through pretraining on large scale robot teleoperation datasets. However, acquiring datasets that comprehensively cover diverse tasks and environments is extremely costly and difficult to scale. In contrast, human demonstration videos offer a rich and scalable source of diverse scenes and manipulation behaviors, yet their lack of explicit action supervision hinders direct utilization. Prior work leverages VQ-VAE based frameworks to learn latent actions from human videos in an unsupervised manner. Nevertheless, since the training objective primarily focuses on reconstructing visual appearances rather than capturing inter-frame dynamics, the learned representations tend to rely on spurious visual cues, leading to shortcut learning and entangled latent representations that hinder transferability. To address this, we propose ConLA, an unsupervised pretraining framework for learning robotic policies from human videos. ConLA introduces a contrastive disentanglement mechanism that leverages action category priors and temporal cues to isolate motion dynamics from visual content, effectively mitigating shortcut learning. Extensive experiments show that ConLA achieves strong performance across diverse benchmarks. Notably, by pretraining solely on human videos, our method for the first time surpasses the performance obtained with real robot trajectory pretraining, highlighting its ability to extract pure and semantically consistent latent action representations for scalable robot learning.

  • 8 authors
·
Jan 31

SuperSuit: An Isomorphic Bimodal Interface for Scalable Mobile Manipulation

High-quality, long-horizon demonstrations are essential for embodied AI, yet acquiring such data for tightly coupled wheeled mobile manipulators remains a fundamental bottleneck. Unlike fixed-base systems, mobile manipulators require continuous coordination between SE(2) locomotion and precise manipulation, exposing limitations in existing teleoperation and wearable interfaces. We present SuperSuit, a bimodal data acquisition framework that supports both robot-in-the-loop teleoperation and active demonstration under a shared kinematic interface. Both modalities produce structurally identical joint-space trajectories, enabling direct data mixing without modifying downstream policies. For locomotion, SuperSuit maps natural human stepping to continuous planar base velocities, eliminating discrete command switches. For manipulation, it employs a strictly isomorphic wearable arm in both modes, while policy training is formulated in a shift-invariant delta-joint representation to mitigate calibration offsets and structural compliance without inverse kinematics. Real-world experiments on long-horizon mobile manipulation tasks show 2.6times higher demonstration throughput in active mode compared to a teleoperation baseline, comparable policy performance when substituting teleoperation data with active demonstrations at fixed dataset size, and monotonic performance improvement as active data volume increases. These results indicate that consistent kinematic representations across collection modalities enable scalable data acquisition for long-horizon mobile manipulation.

  • 6 authors
·
Mar 5 1

$π$, But Make It Fly: Physics-Guided Transfer of VLA Models to Aerial Manipulation

Vision-Language-Action (VLA) models such as π_0 have demonstrated remarkable generalization across diverse fixed-base manipulators. However, transferring these foundation models to aerial platforms remains an open challenge due to the fundamental mismatch between the quasi-static dynamics of fixed-base arms and the underactuated, highly dynamic nature of flight. In this work, we introduce AirVLA, a system that investigates the transferability of manipulation-pretrained VLAs to aerial pick-and-place tasks. We find that while visual representations transfer effectively, the specific control dynamics required for flight do not. To bridge this "dynamics gap" without retraining the foundation model, we introduce a Payload-Aware Guidance mechanism that injects payload constraints directly into the policy's flow-matching sampling process. To overcome data scarcity, we further utilize a Gaussian Splatting pipeline to synthesize navigation training data. We evaluate our method through a cumulative 460 real-world experiments which demonstrate that this synthetic data is a key enabler of performance, unlocking 100% success in navigation tasks where directly fine-tuning on teleoperation data alone attains 81% success. Our inference-time intervention, Payload-Aware Guidance, increases real-world pick-and-place task success from 23% to 50%. Finally, we evaluate the model on a long-horizon compositional task, achieving a 62% overall success rate. These results suggest that pre-trained manipulation VLAs, with appropriate data augmentation and physics-informed guidance, can transfer to aerial manipulation and navigation, as well as the composition of these tasks.

  • 10 authors
·
Mar 25

LEGS: Fine-Tuning Teleop-Free VLAs for Humanoid Loco-manipulation in an Embodied Gaussian Splatting World

Training vision-language-action (VLA) policies for humanoid loco-manipulation is constrained by the high cost and complexity of collecting human teleoperation demonstrations. VLA policies fine-tuned in simulators have, until now, failed to transfer effectively in humanoid loco-manipulation tasks. We present LEGS (Loco-manipulation via Embodied Gaussian Splatting), a hybrid simulator that composites a mesh foreground (robot, objects, props) over a photorealistic 3D Gaussian Splatting (3DGS) background reconstructed from a handheld scene capture. LEGS uses a procedural motion-primitive generator to synthesize labeled demonstrations at scale without human teleoperation, and a deterministic two-stage color calibration to align the rendered 3DGS image to the robot's deployment camera. On a Unitree G1 humanoid robot, across three pick-and-place tasks of increasing whole-body difficulty and three VLA backbones (psi_0, pi_0.5, GR00T N1.6), a policy trained purely on LEGS data matches or exceeds one trained on human teleoperation demos on every experiment. It also outperforms a mesh-only simulation baseline that ablates the effect of the 3DGS background, showing that photorealistic rendering is a key enabler for synthetic data transfer. Humanoid motion is recorded independently of scene appearance in LEGS, allowing the same auto-generated demonstrations to be re-rendered under new backgrounds and object meshes--covering a new scene at more than 15x lower cost than teleoperation--to augment training data for robustness to scene variations. Under combined object-and-scene appearance shift, the policy trained on re-rendered LEGS-AUG data maintains task success while the baseline trained on teleoperation data fails entirely. Our project page is located at https://legsvla.github.io/.

  • 7 authors
·
May 30

WT-UMI: Tactile-based Whole-Body Manipulation via Force-Supervised Contact-Aware Planning

Whole-body humanoid manipulation of bulky, deformable, and shared-load objects requires distributed contact sensing and explicit force regulation, yet most imitation policies treat contact force only implicitly. On the other hand, different demonstration sources provide complementary modalities with inherent trade-offs: human demonstrations capture natural contact forces but not robot-executable actions, while teleoperation directly records robot actions but with less natural force regulation. This paper presents WT-UMI, a wearable whole-body tactile interface worn by human operators or mounted on humanoids, providing accurate observations of tactile images, contact forces, and end-effector poses across both human demonstration and humanoid teleoperation modes. We introduce a force-conditioned target-pose correction module that converts measured human poses into contact-aware robot targets by learning corrections from teleoperation data. To leverage the natural force interaction in human data, we propose a force-supervised planner that predicts end-effector pose chunks and contact-force trajectories. The predicted contact force serves as the reference for a tactile-based admittance controller. Across five contact-rich tasks spanning deformable objects, bulky rigid objects, and human--humanoid collaboration, WT-UMI improves success rate and reduces contact-position tracking error over four policy baselines. Our project page is available at https://wt-umi.github.io/WTUMI/.

  • 18 authors
·
Jun 10

GigaWorld-1: A Roadmap to Build World Models for Robot Policy Evaluation

Evaluating embodied robot foundation models remains a critical bottleneck; unlike large language models efficiently assessed via digital benchmarks, robotic policies require slow, costly real-world rollouts limited by hardware and human supervision, which has driven interest in world models as surrogate policy evaluators, yet the key properties that make a world model reliable for policy assessment remain poorly understood. This work presents a systematic study of world models for robotic policy evaluation and introduces WMBench, a benchmark constructed from real-robot teleoperation data and matched policy rollouts covering diverse manipulation tasks to enable controlled comparisons across model families, action encodings, rollout horizons, and evaluation metrics. Using WMBench, we analyze 7 video world models, 4 action representation schemes, and over 324,000 simulated policy rollouts paired with real robot executions, further enriching our analysis with large-scale community submissions from the CVPR 2026 GigaBrain Challenge, curated synthetic trajectories, and a training videos spanning more than 12,000 hours. Our experiments deliver three core insights: evaluator quality is dominated by long-horizon, action-faithful rollout consistency rather than short-term visual realism; pretraining gains stem not only from data scale but from balancing general world knowledge with robot-specific controllability; and architectural choices including action encoding, memory design, and evaluator-focused post-training strongly determine alignment with real-world robot behavior. Drawing on these results, we derive a practical design roadmap and realize it in GigaWorld-1, a world model specially optimized for policy evaluation, and we fully release our code, models, datasets, and toolkits to advance scalable evaluation research for embodied foundation models.

open-gigaai GigaAI
·
Jul 1 2

RHINO: Learning Real-Time Humanoid-Human-Object Interaction from Human Demonstrations

Humanoid robots have shown success in locomotion and manipulation. Despite these basic abilities, humanoids are still required to quickly understand human instructions and react based on human interaction signals to become valuable assistants in human daily life. Unfortunately, most existing works only focus on multi-stage interactions, treating each task separately, and neglecting real-time feedback. In this work, we aim to empower humanoid robots with real-time reaction abilities to achieve various tasks, allowing human to interrupt robots at any time, and making robots respond to humans immediately. To support such abilities, we propose a general humanoid-human-object interaction framework, named RHINO, i.e., Real-time Humanoid-human Interaction and Object manipulation. RHINO provides a unified view of reactive motion, instruction-based manipulation, and safety concerns, over multiple human signal modalities, such as languages, images, and motions. RHINO is a hierarchical learning framework, enabling humanoids to learn reaction skills from human-human-object demonstrations and teleoperation data. In particular, it decouples the interaction process into two levels: 1) a high-level planner inferring human intentions from real-time human behaviors; and 2) a low-level controller achieving reactive motion behaviors and object manipulation skills based on the predicted intentions. We evaluate the proposed framework on a real humanoid robot and demonstrate its effectiveness, flexibility, and safety in various scenarios.

  • 10 authors
·
Feb 18, 2025

Ropedia W0: Scaling Loco-Manipulation World Models across Embodiments with Human Experience

World models enable embodied agents to anticipate action consequences, yet jointly modeling locomotion and manipulation across diverse embodiments remains challenging due to heterogeneous action spaces and limited multimodal supervision. We present Ropedia W0, the first egocentric loco-manipulation world foundation model spanning humans and robots with diverse embodiments. We curate Xp-Data, comprising 10k hours of egocentric human data and 3k hours of robot data with unified multimodal annotations and systematic quality control. A unified kinematic representation encodes locomotion through camera poses and manipulation through projected skeletons, with robot skeletons combining embodiment-specific forward kinematics with extensive manual keypoint annotation and correction. We also introduce Xp-Teleop, a long-horizon loco-manipulation benchmark based on high-quality dexterous humanoid teleoperation data. Evaluations demonstrate state-of-the-art performance across five cross-embodiment benchmarks (DreamDojo, Ψ_0, ω-HOME, Xp-Teleop, and AgiBot) and on held-out human egocentric video, from zero-shot inference to few-shot and full-data post-training. Scaling human pre-training data improves performance on both human and robot evaluations. After distillation, our model supports real-time, minute-long rollouts, enabling live VR interaction. Applications in policy evaluation, model-based planning, and world-action modeling further demonstrate the model's utility for embodied decision-making.

ropedia-ai Ropedia
·
Oct 18 2

HandEdit: A Unified Benchmark for Egocentric Human-to-Robot Dexterous Hand Image Editing

Robotic manipulation with dexterous hands is a cornerstone of Embodied AI, yet its progress is stifled by the high cost of collecting embodiment-aware teleoperation data. While abundant egocentric videos of human hands offer a scalable alternative, the profound discrepancies in appearance, articulation, and camera viewpoints between human and robotic data raise significant challenges for co-training. Though existing general image-editing models demonstrate strong capabilities, they lack necessary embodiment-specific priors to fully bridge this gap. In this work, we present HandEdit, a unified large-scale embodiment-aware image-editing dataset and benchmark specifically designed to transform human hands and arms into various dexterous robotic embodiments within egocentric frames. HandEdit comprises over 200M editing instances derived from five diverse source datasets, covering 26 distinct URDFs, including 13 hand-only and 13 hand-arm configurations. Alongside the dataset, we establish a unified benchmark protocol with two tracks: Hand-only and Hand-Arm, supporting URDF-conditioned evaluation. We conduct extensive evaluations of 11 representative image-editing baselines using a multi-dimensional metric suite, including generic similarity metrics, VLM-based judgment, and embodiment-aware metrics. HandEdit serves as a critical resource at the intersection of image editing and robotics: it advances embodiment-aware editing models while enabling scalable dexterous robotic learning from abundant human video data, paving the way for more generalizable Embodied AI.

  • 21 authors
·
Aug 11

TrajBooster: Boosting Humanoid Whole-Body Manipulation via Trajectory-Centric Learning

Recent Vision-Language-Action models show potential to generalize across embodiments but struggle to quickly align with a new robot's action space when high-quality demonstrations are scarce, especially for bipedal humanoids. We present TrajBooster, a cross-embodiment framework that leverages abundant wheeled-humanoid data to boost bipedal VLA. Our key idea is to use end-effector trajectories as a morphology-agnostic interface. TrajBooster (i) extracts 6D dual-arm end-effector trajectories from real-world wheeled humanoids, (ii) retargets them in simulation to Unitree G1 with a whole-body controller trained via a heuristic-enhanced harmonized online DAgger to lift low-dimensional trajectory references into feasible high-dimensional whole-body actions, and (iii) forms heterogeneous triplets that couple source vision/language with target humanoid-compatible actions to post-pre-train a VLA, followed by only 10 minutes of teleoperation data collection on the target humanoid domain. Deployed on Unitree G1, our policy achieves beyond-tabletop household tasks, enabling squatting, cross-height manipulation, and coordinated whole-body motion with markedly improved robustness and generalization. Results show that TrajBooster allows existing wheeled-humanoid data to efficiently strengthen bipedal humanoid VLA performance, reducing reliance on costly same-embodiment data while enhancing action space understanding and zero-shot skill transfer capabilities. For more details, For more details, please refer to our https://jiachengliu3.github.io/TrajBooster/.

  • 11 authors
·
Sep 15, 2025

Robotic Data Inoculation

Modern robot learning systems feed on high-quality demonstration data, and their performance hinges on coverage. Without good coverage, small errors compound and the policy can quickly go into out-of-distribution states from which it cannot recover. Yet there is no principled way of collecting high-coverage data, and data collection often relies on heuristic instructions to human operators. Purely online reinforcement learning (RL) explores at the cost of safety and sample efficiency, while DAgger-style interventions require the policy to fail by chance before a human can correct it. In this paper, we ask instead whether we can modify how the robot behaves during data collection to collect more useful data. We propose Data Inoculation (DI), a shared-control framework in which a human provide closed-loop teleoperation commands while a residual policy perturbs these commands. The residual policy is trained online, on the growing dataset, with the same reward-maximizing objective later used for policy extraction, so its perturbations steer data collection toward the deviations a policy trained on the data would make. These perturbations expose the robot to a wider range of states, while the human's continuous corrections provide recovery demonstrations, "inoculating" the dataset against the learner's future mistakes while the human remains in control. On three challenging real-world robotic tasks, DI consistently improves or matches the success rate of policies trained with both behavioral cloning and offline RL, showing DI as an effective data collection strategy for improving downstream policy performance.

  • 4 authors
·
Oct 28

MILE: A Mechanically Isomorphic Exoskeleton Data Collection System with Fingertip Visuotactile Sensing for Dexterous Manipulation

Imitation learning provides a promising approach to dexterous hand manipulation, but its effectiveness is limited by the lack of large-scale, high-fidelity data. Existing data-collection pipelines suffer from inaccurate motion retargeting, low data-collection efficiency, and missing high-resolution fingertip tactile sensing. We address this gap with MILE, a mechanically isomorphic teleoperation and data-collection system co-designed from human hand to exoskeleton to robotic hand. The exoskeleton is anthropometrically derived from the human hand, and the robotic hand preserves one-to-one joint-position isomorphism, eliminating nonlinear retargeting and enabling precise, natural control. The exoskeleton achieves a multi-joint mean absolute angular error below one degree, while the robotic hand integrates compact fingertip visuotactile modules that provide high-resolution tactile observations. Built on this retargeting-free interface, we teleoperate complex, contact-rich in-hand manipulation and efficiently collect a multimodal dataset comprising high-resolution fingertip visuotactile signals, RGB-D images, and joint positions. The teleoperation pipeline achieves a mean success rate improvement of 64%. Incorporating fingertip tactile observations further increases the success rate by an average of 25% over the vision-only baseline, validating the fidelity and utility of the dataset. Further details are available at: https://sites.google.com/view/mile-system.

  • 9 authors
·
Nov 29, 2025

WetRobo: A Reproducible Robot Kit for Coding Agents in Biological Laboratories

Automating biological research requires general-purpose, reproducible robot systems that allow individual wet-lab researchers to delegate robot tasks without performing teleoperation or neural-network training. Vision-language-action policies have been proposed for general-purpose arms, but can lose performance when their operating environment changes. We therefore built WetRobo, a robot kit that can readily transfer between laboratories. It consists of one robot arm, laboratory equipment (an incubator, a reagent bottle with a cap, and a Petri dish), the existing code that moves the arm, teleoperation demonstrations of each task that we recorded, and a general AGENTS.md skill file. A biological experimentalist provides natural-language tasks without collecting local teleoperation training data or training a neural network. The coding agent observes the local laboratory and writes and executes programs, using external tools as needed for adaptation. We demonstrate use of WetRobo with OpenAI Codex (gpt-5.6-sol) on three successful tasks: lifting a Petri dish lid, removing a bottle cap, and opening the incubator door, all in real-world laboratories. The coding agent achieved the cap task in both laboratories, Lab X and Lab Y, whereas a VLA fine-tuned on Lab X demonstrations succeeded there but failed to transfer to Lab Y. These results point to a practical route for laboratory robotics: instead of training a policy for each laboratory, distribute a kit and let a coding agent adapt it in each laboratory. Code, demonstrations, and the evolved programs are available at https://github.com/tsudalab/WetRobo.

  • 8 authors
·
Sep 15

Human2LocoMan: Learning Versatile Quadrupedal Manipulation with Human Pretraining

Quadrupedal robots have demonstrated impressive locomotion capabilities in complex environments, but equipping them with autonomous versatile manipulation skills in a scalable way remains a significant challenge. In this work, we introduce a cross-embodiment imitation learning system for quadrupedal manipulation, leveraging data collected from both humans and LocoMan, a quadruped equipped with multiple manipulation modes. Specifically, we develop a teleoperation and data collection pipeline, which unifies and modularizes the observation and action spaces of the human and the robot. To effectively leverage the collected data, we propose an efficient modularized architecture that supports co-training and pretraining on structured modality-aligned data across different embodiments. Additionally, we construct the first manipulation dataset for the LocoMan robot, covering various household tasks in both unimanual and bimanual modes, supplemented by a corresponding human dataset. We validate our system on six real-world manipulation tasks, where it achieves an average success rate improvement of 41.9% overall and 79.7% under out-of-distribution (OOD) settings compared to the baseline. Pretraining with human data contributes a 38.6% success rate improvement overall and 82.7% under OOD settings, enabling consistently better performance with only half the amount of robot data. Our code, hardware, and data are open-sourced at: https://human2bots.github.io.

  • 14 authors
·
Jun 19, 2025

KineDex: Learning Tactile-Informed Visuomotor Policies via Kinesthetic Teaching for Dexterous Manipulation

Collecting demonstrations enriched with fine-grained tactile information is critical for dexterous manipulation, particularly in contact-rich tasks that require precise force control and physical interaction. While prior works primarily focus on teleoperation or video-based retargeting, they often suffer from kinematic mismatches and the absence of real-time tactile feedback, hindering the acquisition of high-fidelity tactile data. To mitigate this issue, we propose KineDex, a hand-over-hand kinesthetic teaching paradigm in which the operator's motion is directly transferred to the dexterous hand, enabling the collection of physically grounded demonstrations enriched with accurate tactile feedback. To resolve occlusions from human hand, we apply inpainting technique to preprocess the visual observations. Based on these demonstrations, we then train a visuomotor policy using tactile-augmented inputs and implement force control during deployment for precise contact-rich manipulation. We evaluate KineDex on a suite of challenging contact-rich manipulation tasks, including particularly difficult scenarios such as squeezing toothpaste onto a toothbrush, which require precise multi-finger coordination and stable force regulation. Across these tasks, KineDex achieves an average success rate of 74.4%, representing a 57.7% improvement over the variant without force control. Comparative experiments with teleoperation and user studies further validate the advantages of KineDex in data collection efficiency and operability. Specifically, KineDex collects data over twice as fast as teleoperation across two tasks of varying difficulty, while maintaining a near-100% success rate, compared to under 50% for teleoperation.

  • 6 authors
·
May 3, 2025

Closing the Loop in Teleoperation: Episode-Level Data Quality Assessment and Feedback for High-Quality Demonstration Collection

Industrial automation is at a pivotal moment, as Physical AI is driving a transition from rigid, hand-engineered automation systems toward more flexible and adaptive systems. This shift has created a growing demand for large-scale, real-world robot demonstration data, making teleoperation an increasingly important mechanism for data collection. However, high-quality teleoperated demonstrations remain difficult to obtain in practice, as novice operators often produce episodes that are task-successful but suboptimal for downstream use due to inefficient motion, repeated corrections, or operation near robot joint limits. We present a Data Quality Assessment and Feedback (DQAF) framework that closes the loop in teleoperation by providing immediate post-episode feedback grounded in semantic task progress and robot telemetry. The framework extracts quality relevant signals such as sub-task progress, motion smoothness, stalls, kinematic limits and converts them into structured quality assessments and actionable natural-language feedback. Unlike binary success or failure feedback, the proposed system explains why an episode is suboptimal and highlights specific behaviors to correct in the next trial. We evaluate the framework through a diagnostic validation study and a pilot user study. In the validation study, the system is compared with a human reviewer during dataset curation, producing rejection reasons and actionable feedback for improvement. In the pilot study with three novice operators across two manipulation tasks, the operator who received the systems immediate, automated post-episode feedback improved faster than those who did not, producing higher-quality demonstrations sooner.

  • 5 authors
·
May 24

SkillWeaver: Agentic Exploration over Neural Interaction Skills for Scalable Robot Data Generation

Large-scale demonstrations have driven unprecedented progress in robot learning, yet collecting robot data through teleoperation is expensive and difficult to scale to diverse environments and long-horizon tasks. Simulation offers a scalable alternative, but existing data-generation pipelines often rely on open-loop controllers, scripted skill sequences, or task-specific programs. We introduce SkillWeaver, an agentic framework that autonomously generates robot experience by exploring over Neural Interaction Skills (NIS): reusable, parameterized, closed-loop policies that expose learned physical interaction capabilities to a reasoning agent. Given a task and a simulated environment, a VLM agent reasons about what to do next, invokes and parameterizes NIS to interact with the environment, observes their outcomes, and generates verification, reflection, and memory to guide subsequent exploration. We instantiate NIS as reinforcement-learned policies for closed-loop, contact-rich manipulation and organize exploration as verifier-guided tree search, enabling the agent to discover successful long-horizon behaviors without relying on predetermined execution pipelines. SkillWeaver scales autonomously to 39.1K demonstrations across 14.1K scenes, which we distill into visuomotor policies. Across simulation benchmarks and real-world manipulation, training on SkillWeaver-generated experience substantially improves generalization to novel objects, spatial configurations, tasks, and environments, and enables zero- and few-shot sim-to-sim and sim-to-real transfer. Our results suggest agentic exploration over neural interaction skills as a scalable alternative for robot data generation.

  • 5 authors
·
Sep 27

MV-UMI: A Scalable Multi-View Interface for Cross-Embodiment Learning

Recent advances in imitation learning have shown great promise for developing robust robot manipulation policies from demonstrations. However, this promise is contingent on the availability of diverse, high-quality datasets, which are not only challenging and costly to collect but are often constrained to a specific robot embodiment. Portable handheld grippers have recently emerged as intuitive and scalable alternatives to traditional robotic teleoperation methods for data collection. However, their reliance solely on first-person view wrist-mounted cameras often creates limitations in capturing sufficient scene contexts. In this paper, we present MV-UMI (Multi-View Universal Manipulation Interface), a framework that integrates a third-person perspective with the egocentric camera to overcome this limitation. This integration mitigates domain shifts between human demonstration and robot deployment, preserving the cross-embodiment advantages of handheld data-collection devices. Our experimental results, including an ablation study, demonstrate that our MV-UMI framework improves performance in sub-tasks requiring broad scene understanding by approximately 47% across 3 tasks, confirming the effectiveness of our approach in expanding the range of feasible manipulation tasks that can be learned using handheld gripper systems, without compromising the cross-embodiment advantages inherent to such systems.

  • 5 authors
·
Sep 23, 2025

Human-as-Humanoid: Enabling Zero-Shot Humanoid Learning from Ego-Exo Human Videos with Human-Aligned Embodiments

Vision-language-action (VLA) models across robot embodiments require high-quality observation--action supervision to learn deployable action distributions, yet scaling such robot data remains difficult, especially for high-DoF humanoids. Teleoperation provides controller-aligned supervision, while human egocentric videos capture diverse bimanual manipulation but do not directly provide executable robot actions. We introduce Human-as-Humanoid, a human-to-humanoid supervision framework that enables near-real-time human-centric action generation, making human demonstrations usable for high-DoF humanoid VLA training by jointly aligning the robot embodiment, the sensing setup, and the action-label interface. Built on PrimeU, a human-aligned 60-DoF upper-body humanoid, Human-as-Humanoid uses synchronized ego-exo videos to pair deployment-aligned egocentric observations with exocentric motion recovery, retargets the recovered human motion through staged Inverse Kinematics (IK) into controller-aligned 60-DoF action chunks, and trains the VLA model with Forward Kinematics (FK)-aware supervision to preserve wrist and fingertip task-space geometry. This converts large-scale human demonstrations from visual observations into executable observation--action supervision for the target humanoid. Experiments validate the conversion chain at the motion-recovery, robot-action-space, and real-robot deployment levels. Human-as-Humanoid yields a 4.8--7.2x raw demonstration-throughput gain over humanoid teleoperation in our data-collection analysis, and on several downstream tasks, policies post-trained only with the converted human labels generalize to real-robot deployment without target-task robot demonstrations. The official project website is available at https://zgc-embodyai.github.io/Human-as-Humanoid.

  • 17 authors
·
Jun 29

SimVLA: Zero-Shot Sim-to-Real VLA Learning for Mobile Manipulation

Large-scale, diverse datasets have driven the success of LLMs and VLMs. But VLAs for robotics remain limited by the cost and complexity of real-world data collection. While simulation offers a scalable alternative, its potential for sim-to-real VLA learning in mobile manipulation remains largely underexplored. We introduce SimVLA, an end-to-end framework that trains VLAs entirely on synthetic simulation data without teleoperation for mobile manipulation. SimVLA is first pre-trained on two complementary simulation-derived datasets: SimAction, a large-scale robot action dataset spanning 35 diverse mobile manipulation tasks, generated by composing atomic skills, and SimVQA, which leverages privileged simulator state to provide spatial, geometric, and subtask-level visual-language supervision. We further post-train SimVLA on a mixture of SimAction and SimDeploy, a dataset collected from policy rollouts across diverse simulated environments. We evaluate SimVLA on tasks including restocking, pouring, and cleaning, and show zero-shot transfer to real-world mobile manipulation, including real home environments. SimVLA outperforms policies trained on 50 in-domain real-world demonstrations, suggesting that simulation can enable scalable sim-to-real mobile manipulation. We further demonstrate the value of multiple complementary forms of supervision for effectively leveraging simulation in VLA training.

  • 2 authors
·
Oct 7

BEHAVIOR Robot Suite: Streamlining Real-World Whole-Body Manipulation for Everyday Household Activities

Real-world household tasks present significant challenges for mobile manipulation robots. An analysis of existing robotics benchmarks reveals that successful task performance hinges on three key whole-body control capabilities: bimanual coordination, stable and precise navigation, and extensive end-effector reachability. Achieving these capabilities requires careful hardware design, but the resulting system complexity further complicates visuomotor policy learning. To address these challenges, we introduce the BEHAVIOR Robot Suite (BRS), a comprehensive framework for whole-body manipulation in diverse household tasks. Built on a bimanual, wheeled robot with a 4-DoF torso, BRS integrates a cost-effective whole-body teleoperation interface for data collection and a novel algorithm for learning whole-body visuomotor policies. We evaluate BRS on five challenging household tasks that not only emphasize the three core capabilities but also introduce additional complexities, such as long-range navigation, interaction with articulated and deformable objects, and manipulation in confined spaces. We believe that BRS's integrated robotic embodiment, data collection interface, and learning framework mark a significant step toward enabling real-world whole-body manipulation for everyday household tasks. BRS is open-sourced at https://behavior-robot-suite.github.io/

  • 10 authors
·
Mar 7, 2025 2

GE-Sim 2.0: A Roadmap Towards Comprehensive Closed-loop Video World Simulators for Robotic Manipulation

We introduce GE-Sim 2.0 (Genie Envisioner World Simulator 2.0), a closed-loop video world simulator for robotic manipulation. Building on the action-conditioned video generation framework of Genie Envisioner, GE-Sim 2.0 is re-trained on thousands of hours of real-world robot data spanning teleoperation, contact-rich interaction, and on-robot policy deployment, substantially improving action-following fidelity and trajectory coverage. On top of this foundation, three new modules close the loop from video simulation to policy learning: a state expert that decodes proprioceptive state from video latents to support next-chunk prediction by downstream VLA policies; a world judge that scores generated rollouts against task instructions, yielding machine-verifiable success signals and rewards in place of manual inspection; and an acceleration framework that delivers a 25-frame rollout in 2.3 seconds on a single H100, with up to 4* frame skipping at inference for long-horizon evaluation. GE-Sim 2.0 tops the public WorldArena leaderboard at only 2B parameters, outperforming both dedicated robotic world models and closed-source general video generators, and policies trained against its rollouts and rewards translate into measurable real-world gains, establishing GE-Sim 2.0 as a practical platform for scalable evaluation and closed-loop learning of manipulation policies.

agibot-world AgiBot World
·
May 25 2

End-to-End Dexterous Arm-Hand VLA Policies via Shared Autonomy: VR Teleoperation Augmented by Autonomous Hand VLA Policy for Efficient Data Collection

Achieving human-like dexterous manipulation remains a major challenge for general-purpose robots. While Vision-Language-Action (VLA) models show potential in learning skills from demonstrations, their scalability is limited by scarce high-quality training data. Existing data collection methods face inherent constraints: manual teleoperation overloads human operators, while automated planning often produces unnatural motions. We propose a Shared Autonomy framework that divides control between macro and micro motions. A human operator guides the robot's arm pose through intuitive VR teleoperation, while an autonomous DexGrasp-VLA policy handles fine-grained hand control using real-time tactile and visual feedback. This division significantly reduces cognitive load and enables efficient collection of high-quality coordinated arm-hand demonstrations. Using this data, we train an end-to-end VLA policy enhanced with our novel Arm-Hand Feature Enhancement module, which captures both distinct and shared representations of macro and micro movements for more natural coordination. Our Corrective Teleoperation system enables continuous policy improvement through human-in-the-loop failure recovery. Experiments demonstrate that our framework generates high-quality data with minimal manpower and achieves a 90% success rate across diverse objects, including unseen instances. Comprehensive evaluations validate the system's effectiveness in developing dexterous manipulation capabilities.

  • 6 authors
·
Oct 31, 2025

PyRUA-DataFarm: LLM Agent as a Cost-Efficient Teleoperator for Real-Ready Robot Data

Teleoperation remains the default way to collect robot demonstrations, but every episode costs robot and operator time, and every new task starts from scratch. We ask whether a coding agent can take over the teleoperator's job. In our DataFarm, the agent receives a data request and one calibration episode of the robot in the target scene and rebuilds the task in simulation: it writes the scene, an expert controller, and a success judge. The simulator supplies exact actions, and a video model conditioned on real images renders each rollout as photographic video, generating all camera views together consistently. The output is real-ready data: synchronized camera views labelled with the robot's actions, on which a policy can be trained directly and deployed on the real robot. Independent judges certify the expert and every rendered episode before admission. On five real-robot tasks, policies trained only on farm data match policies trained on as many teleoperated episodes (93 vs. 84 successes in 100 trials), and under an unseen tablecloth and coloured light they keep 87 successes where the teleoperation-trained policies fall to 46. Adapting a task is fully automatic and costs \21 of API usage on average, paid once per task, plus 5 for a render contract; every further episode costs \0.80 on average for simulation, rendering, and review, with no robot or operator. One hour of three-view data for a task costs 107 on average, these costs included, slightly below a quote of \117 for teleoperation in China and below 290 in labour alone in North America.

DAGroup-PKU DAGroup-PKU
·
Nov 3 8

EgoLive: A Large-Scale Egocentric Dataset from Real-World Human Tasks

The advancement of robot learning is currently hindered by the scarcity of large-scale, high-quality datasets. While established data collection methods such as teleoperation and universal manipulation interfaces dominate current datasets, they suffer from inherent limitations in scalability and real-world deployability. Human egocentric video collection, by contrast, has emerged as a promising approach to enable scalable, natural and in-the-wild data collection. As such, we present EgoLive, a large-scale, high-quality egocentric dataset designed explicitly for robot manipulation learning. EgoLive establishes three distinctive technical advantages over existing egocentric datasets: first, it represents the largest open-source annotated egocentric dataset focused on real-world task-oriented human routines to date; second, it delivers leading data quality via a customized head-mounted capture device and comprehensive high-precision multi-modal annotations; third, all data is collected exclusively in unconstrained real-world scenarios and encompasses vertical field human working data, including home service, retail, and other practical work scenarios, providing superior diversity and ecological validity. With the introduction of EgoLive, we aim to provide the research community with a scalable, high-quality dataset that accelerates breakthroughs in generalizable robotic models and facilitates the real-world deployment of robot systems.

  • 29 authors
·
Apr 25

CLOT: Closed-Loop Global Motion Tracking for Whole-Body Humanoid Teleoperation

Long-horizon whole-body humanoid teleoperation remains challenging due to accumulated global pose drift, particularly on full-sized humanoids. Although recent learning-based tracking methods enable agile and coordinated motions, they typically operate in the robot's local frame and neglect global pose feedback, leading to drift and instability during extended execution. In this work, we present CLOT, a real-time whole-body humanoid teleoperation system that achieves closed-loop global motion tracking via high-frequency localization feedback. CLOT synchronizes operator and robot poses in a closed loop, enabling drift-free human-to-humanoid mimicry over long timehorizons. However, directly imposing global tracking rewards in reinforcement learning, often results in aggressive and brittle corrections. To address this, we propose a data-driven randomization strategy that decouples observation trajectories from reward evaluation, enabling smooth and stable global corrections. We further regularize the policy with an adversarial motion prior to suppress unnatural behaviors. To support CLOT, we collect 20 hours of carefully curated human motion data for training the humanoid teleoperation policy. We design a transformer-based policy and train it for over 1300 GPU hours. The policy is deployed on a full-sized humanoid with 31 DoF (excluding hands). Both simulation and real-world experiments verify high-dynamic motion, high-precision tracking, and strong robustness in sim-to-real humanoid teleoperation. Motion data, demos and code can be found in our website.

  • 11 authors
·
Feb 19

AutoDex: An Automated Real-World System for Dexterous Grasping Data Collection

Learning robust dexterous grasping requires real-world data that records the physical outcomes of grasp attempts. Such data is hard to obtain at scale: teleoperation yields valid physical outcomes but is slow and operator-biased, while simulation-based generation is cheap and scalable but cannot certify contact validity. A natural solution is to generate candidate grasps and verify them on real hardware, but this scales only if the entire collection loop (perception, execution, labeling, and reset) runs without human intervention. We present AutoDex, an automated real-world data-collection system that closes this loop: for each candidate from a replaceable generator, it localizes the object under severe hand-object occlusion with dense 20-camera perception, executes collision-monitored robot motions, labels lift-and-hold success or failure, and actively resets the object between trials to expose additional candidates across stable poses. The result is a reusable database of physically labeled grasp trials that downstream systems can query by retrieval and feasibility filtering. Using AutoDex, we collect 3,593 grasp trials across Allegro and Inspire hands on 100 diverse objects, with synchronized multi-view observations and robot-state logs. For a matched 500-trajectory collection, AutoDex requires 10.3 h versus 49.4 h for teleoperation, yielding a 4.8x throughput improvement, and grasps retrieved from the AutoDex-validated database succeed 76% versus 34% for simulation-only validation. Code and data will be publicly released.

  • 7 authors
·
Jun 21

HapTile: A Haptic-Informed Vision-Tactile-Language-Action Dataset for Contact-Rich Imitation Learning

Despite the importance of tactile sensing for reliable manipulation, most existing Vision-Language-Action (VLA) datasets remain vision-only, and those that do incorporate tactile information typically lack the joint combination of task diversity, language conditioning, and action trajectories. Furthermore, existing teleoperation pipelines rarely provide haptic feedback to the operator, despite its established role in demonstration quality and manipulation stability. In this work, we present HapTile, a contact-grounded visuotactile manipulation dataset that advances beyond vision-only trajectory datasets by embedding physical interaction sensing at two levels: fingertip tactile feedback at the robot end-effector, and haptic-informed demonstrations at the teleoperator side. The data collection platform integrates haptic feedback directly into the teleoperation controller, enabling the operator to perceive contact interactions in real time. It is built around a standard and reproducible robotic system equipped with custom-designed fingertip tactile sensors. The dataset comprises everyday manipulation tasks spanning a broad range of contact-rich skills, including pick-and-place, folding, pressing, stacking, and other routine activities. Each task is paired with language instructions that condition the policy on the manipulation objective, together with synchronized visuotactile observations and action trajectories. In addition, we provide a benchmarking study on contact-rich policy learning using two baseline models to evaluate the effectiveness of the proposed contact-grounded dataset. The dataset and additional details are available on our website: haptile-dataset.github.io.

  • 8 authors
·
Jun 18

DexFlyWheel: A Scalable and Self-improving Data Generation Framework for Dexterous Manipulation

Dexterous manipulation is critical for advancing robot capabilities in real-world applications, yet diverse and high-quality datasets remain scarce. Existing data collection methods either rely on human teleoperation or require significant human engineering, or generate data with limited diversity, which restricts their scalability and generalization. In this paper, we introduce DexFlyWheel, a scalable data generation framework that employs a self-improving cycle to continuously enrich data diversity. Starting from efficient seed demonstrations warmup, DexFlyWheel expands the dataset through iterative cycles. Each cycle follows a closed-loop pipeline that integrates Imitation Learning (IL), residual Reinforcement Learning (RL), rollout trajectory collection, and data augmentation. Specifically, IL extracts human-like behaviors from demonstrations, and residual RL enhances policy generalization. The learned policy is then used to generate trajectories in simulation, which are further augmented across diverse environments and spatial configurations before being fed back into the next cycle. Over successive iterations, a self-improving data flywheel effect emerges, producing datasets that cover diverse scenarios and thereby scaling policy performance. Experimental results demonstrate that DexFlyWheel generates over 2,000 diverse demonstrations across four challenging tasks. Policies trained on our dataset achieve an average success rate of 81.9\% on the challenge test sets and successfully transfer to the real world through digital twin, achieving a 78.3\% success rate on dual-arm lift tasks.

  • 11 authors
·
Sep 27, 2025

Real2Render2Real: Scaling Robot Data Without Dynamics Simulation or Robot Hardware

Scaling robot learning requires vast and diverse datasets. Yet the prevailing data collection paradigm-human teleoperation-remains costly and constrained by manual effort and physical robot access. We introduce Real2Render2Real (R2R2R), a novel approach for generating robot training data without relying on object dynamics simulation or teleoperation of robot hardware. The input is a smartphone-captured scan of one or more objects and a single video of a human demonstration. R2R2R renders thousands of high visual fidelity robot-agnostic demonstrations by reconstructing detailed 3D object geometry and appearance, and tracking 6-DoF object motion. R2R2R uses 3D Gaussian Splatting (3DGS) to enable flexible asset generation and trajectory synthesis for both rigid and articulated objects, converting these representations to meshes to maintain compatibility with scalable rendering engines like IsaacLab but with collision modeling off. Robot demonstration data generated by R2R2R integrates directly with models that operate on robot proprioceptive states and image observations, such as vision-language-action models (VLA) and imitation learning policies. Physical experiments suggest that models trained on R2R2R data from a single human demonstration can match the performance of models trained on 150 human teleoperation demonstrations. Project page: https://real2render2real.com

  • 8 authors
·
May 14, 2025 2

Humanoid Everyday: A Comprehensive Robotic Dataset for Open-World Humanoid Manipulation

From loco-motion to dextrous manipulation, humanoid robots have made remarkable strides in demonstrating complex full-body capabilities. However, the majority of current robot learning datasets and benchmarks mainly focus on stationary robot arms, and the few existing humanoid datasets are either confined to fixed environments or limited in task diversity, often lacking human-humanoid interaction and lower-body locomotion. Moreover, there are a few standardized evaluation platforms for benchmarking learning-based policies on humanoid data. In this work, we present Humanoid Everyday, a large-scale and diverse humanoid manipulation dataset characterized by extensive task variety involving dextrous object manipulation, human-humanoid interaction, locomotion-integrated actions, and more. Leveraging a highly efficient human-supervised teleoperation pipeline, Humanoid Everyday aggregates high-quality multimodal sensory data, including RGB, depth, LiDAR, and tactile inputs, together with natural language annotations, comprising 10.3k trajectories and over 3 million frames of data across 260 tasks across 7 broad categories. In addition, we conduct an analysis of representative policy learning methods on our dataset, providing insights into their strengths and limitations across different task categories. For standardized evaluation, we introduce a cloud-based evaluation platform that allows researchers to seamlessly deploy their policies in our controlled setting and receive performance feedback. By releasing Humanoid Everyday along with our policy learning analysis and a standardized cloud-based evaluation platform, we intend to advance research in general-purpose humanoid manipulation and lay the groundwork for more capable and embodied robotic agents in real-world scenarios. Our dataset, data collection code, and cloud evaluation website are made publicly available on our project website.

  • 10 authors
·
Oct 9, 2025

ACE-F: A Cross Embodiment Foldable System with Force Feedback for Dexterous Teleoperation

Teleoperation systems are essential for efficiently collecting diverse and high-quality robot demonstration data, especially for complex, contact-rich tasks. However, current teleoperation platforms typically lack integrated force feedback, cross-embodiment generalization, and portable, user-friendly designs, limiting their practical deployment. To address these limitations, we introduce ACE-F, a cross embodiment foldable teleoperation system with integrated force feedback. Our approach leverages inverse kinematics (IK) combined with a carefully designed human-robot interface (HRI), enabling users to capture precise and high-quality demonstrations effortlessly. We further propose a generalized soft-controller pipeline integrating PD control and inverse dynamics to ensure robot safety and precise motion control across diverse robotic embodiments. Critically, to achieve cross-embodiment generalization of force feedback without additional sensors, we innovatively interpret end-effector positional deviations as virtual force signals, which enhance data collection and enable applications in imitation learning. Extensive teleoperation experiments confirm that ACE-F significantly simplifies the control of various robot embodiments, making dexterous manipulation tasks as intuitive as operating a computer mouse. The system is open-sourced at: https://acefoldable.github.io/

  • 6 authors
·
Nov 25, 2025

HALO: Human-Aligned Data Collection for WhoLe-body MObile Manipulation

Learning whole-body mobile manipulation requires demonstrations that coordinate bimanual actions with locomotion across extended workspaces. However, existing interfaces trade off direct robot control, perception and action alignment, and natural operator mobility, making such demonstrations difficult to collect. We introduce HALO, a human-aligned data collection system for whole-body mobile manipulation. The system aligns the operator's perception and action space with the robot while preserving direct physical feedback and natural locomotion. Operators guide the robot end-effectors through kinesthetic teaching and move a low-resistance platform without the deployed mobile base while performing bimanual manipulation. This interface enables more natural whole-body demonstrations, but the close human-robot coupling introduces discrepancies between the demonstration and deployment settings. We address these discrepancies with deployment-aligned demonstration processing, which calibrates and temporally aligns platform motion with the deployed base response and masks and inpaints demonstrator hands in recorded observations. Compared with Mobile ALOHA and VR teleoperation, HALO enables up to 2.9x faster demonstration collection while maintaining comparable or higher success rates. Policies trained with HALO perform precise manipulation tasks, including zip-tie fastening, and achieve a 73.3% success rate on a six-stage long-horizon mobile manipulation task involving repeated coordinated base and arm motion. Project page: https://robbyant-research.github.io/Lingbot-ALOHA/

RoboMIND: Benchmark on Multi-embodiment Intelligence Normative Data for Robot Manipulation

Developing robust and general-purpose robotic manipulation policies is a key goal in the field of robotics. To achieve effective generalization, it is essential to construct comprehensive datasets that encompass a large number of demonstration trajectories and diverse tasks. Unlike vision or language data that can be collected from the Internet, robotic datasets require detailed observations and manipulation actions, necessitating significant investment in hardware-software infrastructure and human labor. While existing works have focused on assembling various individual robot datasets, there remains a lack of a unified data collection standard and insufficient diversity in tasks, scenarios, and robot types. In this paper, we introduce RoboMIND (Multi-embodiment Intelligence Normative Data for Robot manipulation), featuring 55k real-world demonstration trajectories across 279 diverse tasks involving 61 different object classes. RoboMIND is collected through human teleoperation and encompasses comprehensive robotic-related information, including multi-view RGB-D images, proprioceptive robot state information, end effector details, and linguistic task descriptions. To ensure dataset consistency and reliability during policy learning, RoboMIND is built on a unified data collection platform and standardized protocol, covering four distinct robotic embodiments. We provide a thorough quantitative and qualitative analysis of RoboMIND across multiple dimensions, offering detailed insights into the diversity of our datasets. In our experiments, we conduct extensive real-world testing with four state-of-the-art imitation learning methods, demonstrating that training with RoboMIND data results in a high manipulation success rate and strong generalization. Our project is at https://x-humanoid-robomind.github.io/.

  • 36 authors
·
Dec 18, 2024

A Closed-Form Geometric Retargeting Solver for Upper Body Humanoid Robot Teleoperation

Retargeting human motion to robot poses is a practical approach for teleoperating bimanual humanoid robot arms, but existing methods can be suboptimal and slow, often causing undesirable motion or latency. This is due to optimizing to match robot end-effector to human hand position and orientation, which can also limit the robot's workspace to that of the human. Instead, this paper reframes retargeting as an orientation alignment problem, enabling a closed-form, geometric solution algorithm with an optimality guarantee. The key idea is to align a robot arm to a human's upper and lower arm orientations, as identified from shoulder, elbow, and wrist (SEW) keypoints; hence, the method is called SEW-Mimic. The method has fast inference (3 kHz) on standard commercial CPUs, leaving computational overhead for downstream applications; an example in this paper is a safety filter to avoid bimanual self-collision. The method suits most 7-degree-of-freedom robot arms and humanoids, and is agnostic to input keypoint source. Experiments show that SEW-Mimic outperforms other retargeting methods in computation time and accuracy. A pilot user study suggests that the method improves teleoperation task success. Preliminary analysis indicates that data collected with SEW-Mimic improves policy learning due to being smoother. SEW-Mimic is also shown to be a drop-in way to accelerate full-body humanoid retargeting. Finally, hardware demonstrations illustrate SEW-Mimic's practicality. The results emphasize the utility of SEW-Mimic as a fundamental building block for bimanual robot manipulation and humanoid robot teleoperation.

  • 14 authors
·
Feb 1

RynnWorld-Teleop: An Action-Conditioned World Model for Digital Teleoperation

Scaling robot learning requires massive, diverse trajectory data, yet collection is currently bottlenecked by physical teleoperation, where every demonstration binds operator time to specific hardware and workspaces. We introduce digital teleoperation, a paradigm that decouples data collection from physical constraints by replacing the real robot with a generative world model. In this framework, an operator's hand-pose stream drives a robot-centric generative world model to synthesize high-fidelity egocentric videos from a single reference image. The recorded pose stream serves as an embodiment-agnostic action label transferable to any target robot via standard retargeting, yielding complete state-action trajectories for imitation learning independent of physical hardware. We instantiate this paradigm in RynnWorld-Teleop, a system that integrates depth-aware skeletal conditioning, progressive human-to-robot training on a video Diffusion Transformer, and streaming autoregressive distillation. This pipeline compresses the generative process into a single-pass inference, enabling 40+ FPS, real-time interactive generation on a single H100 GPU. Policies trained exclusively on RynnWorld-Teleop-generated data achieve effective zero-shot Sim2Real transfer across dexterous and diverse bimanual tasks. Moreover, augmenting real-world datasets with our digitally teleoperated data consistently improves success rates, demonstrating that RynnWorld-Teleop serves as a high-fidelity, scalable data engine for the next generation of robotic agents.

  • 9 authors
·
Jul 6 1

Worlds in One Demo: A Synthetic Data Engine for Learning Open-World Mobile Manipulation

Learning open-world mobile manipulation policies requires vast data to achieve spatial generalization, long-horizon robustness, and scene generalization. Current prevailing data collection paradigms, teleoperation and UMI, demand prohibitive human effort and cost at scale. To scale beyond the limits of manual data collection, we seek to maximize the value of each human demonstration by scalable data generation. To this end, we introduce WANDA: learning open-World mobile mANipulation from one demonstration via a synthetic DAta engine. WANDA first reconstructs background Gaussian splats and robot-object interaction trajectories from source RGBD observations, as a world substrate for later planning and rendering. It then rearranges contact-rich robot-object interaction segments into extensive spatial configurations, utilizing whole-body motion planning to chain them into new trajectories. To enhance long-horizon robustness, it applies Corrective State Expansion to increase the robot and object state diversity at different stages of mobile manipulation. To unlock cross-environment generalization, trajectories are synthesized on diverse generated 3D worlds from everyday photos. Furthermore, we synthesize photo-realistic observations by compositing rendered robot and object meshes with Gaussian splatting backgrounds. We evaluate our approach on extensive simulation and real-world tasks in various scenes. Experiments show that policies trained with WANDA achieve long-horizon robustness, broad spatial generalization and cross-environment generalization from one real demonstration. Moreover, WANDA naturally supports cross-embodiment data generation, validated by zero-shot deployment on another mobile manipulator with a distinct morphology.

  • 3 authors
·
Jul 16

HiFi-UMI: Learning Deployable Manipulation Policies from High-Fidelity UMI Data Alone

Learning deployable manipulation policies is bottlenecked by the scarcity of data that is both high-fidelity and scalable. Real-robot teleoperation is accurate but costly to scale; robot-free UMI capture scales readily, and current practice uses the resulting data mainly for pre-training, adding a small real-robot "anchor" at post-training. We ask whether raising the fidelity of robot-free UMI data, rather than shrinking the real-robot fraction, can remove that anchor. We present HiFi-UMI, a portable UMI data-production system co-designed for trajectory accuracy, inter-gripper relative pose, synchronization, and field of view: head-mounted offline stereo-inertial SLAM, native rather than reconstructed relative pose, a shared microsecond GPIO trigger, and two wide-angle cameras per hand covering ~200 degrees. It reaches 3 mm workspace-local end-effector accuracy without external tracking infrastructure. Using this corpus, we demonstrate zero-robot post-training: a policy post-trained solely on HiFi-UMI demonstrations deploys directly on a real robot and matches in-domain teleoperation across three backbones spanning the vision-language-action and world-action-model families, with success-rate differences of -2.5, +3.1, and -0.6 percentage points on StarVLA-QwenPI, OpenPI-pi_0.5, and LingBot-VA; the strongest policy reaches 85% on a precision insertion task, even though the teleoperation baseline is collected in the evaluation scene and no HiFi-UMI trajectory is. Pre-training on 4,000 hours from the same corpus lowers action error on ten unseen tasks by 41% and, on StarVLA-QwenPI, raises real-robot success by a further 18.1 percentage points. We open-source HiFi-UMI-2K, 2,000 hours of microsecond-synchronized, ultra-wide-FoV demonstrations, each automatically reconstructed and validated through simulation replay, as a large-scale, high-fidelity resource for the robot-learning community.

MANIGUARD: A Benchmark and Data Suite for Specification-Grounded Safety Evaluation and Improvement of Robotic Manipulation

Foundation-model policies for robotic manipulation are advancing rapidly on task success, but rigorous evaluation of whether they succeed safely is still lacking. We introduce ManiGuard, a specification-grounded framework for evaluating and improving the safety of foundation-model manipulation, comprising the ManiGuard-Bench task suite and a paired safety-annotated trajectory-generation pipeline. ManiGuard-Bench organizes six contact-rich household task families into 200 locked base tasks along a skill times constraint taxonomy, with safety specified independently of task success. Each task is evaluated under one in-distribution and four single-axis out-of-distribution perturbations that hold the safety specification fixed, giving 1,000 locked scenarios. Every rollout is runtime-checked by LTL_f-grounded automaton monitors over physics-grounded predicates rather than learned classifiers or LLM judges, in simulation and on a physical Franka platform. The pipeline pairs an automated motion-planning generator with human teleoperation, annotated by the same per-step monitor, and directly supports safety-aware fine-tuning; we release 8,000 safety-annotated demonstrations, 40 per base task. Benchmarking zero-shot and fine-tuned VLAs across more than 23,000 rollouts, we find: (i) safety must be evaluated independently of task success, as 6-21% of successful rollouts violate the specification; (ii) fine-tuning on our suite raises safe task completion from near zero to 7.5-29.8% and engaged-and-safe behavior from 16-40% to 51-72%; but (iii) a gap remains that scaling demonstrations does not close, with 21-42% of engaged rollouts still violating, two of six families below 2% safe success for every policy, and these failures persisting under distribution shift and on hardware.

  • 14 authors
·
Aug 17 1

Learning Panorama-Aware VLA for Mobile Manipulation with Whole-Body Teleoperation

Mobile manipulation is a key capability for embodied intelligence, enabling robots to accomplish complex multi-stage tasks in open-world environments. However, mobile manipulation poses two key challenges for vision-language-action (VLA) policies: At the data level, the efficient collection of high-quality whole-body demonstrations demands the coordinated control of both the mobile base and the robotic arms; at the model level, existing VLA models predominantly rely on local camera observations, whose limited field of view hinders global spatial understanding. To address these challenges, we develop a whole-body teleoperation system and a panoramic-aware VLA policy. The system enables coordinated control of a wheeled bimanual robot through a single VR interface and supports the acquisition of a real-world mobile manipulation dataset comprising 5.5 hours of multimodal demonstrations. Building upon this dataset, we propose PanoVLA, a panorama-aware vision-language-action policy for mobile bimanual manipulation. Built upon a Mixture-of-Transformers architecture, PanoVLA introduces global spatial context through dedicated panorama encoding and fusion modules, enabling effective integration of panoramic observations with language instructions and robot states for action generation. Evaluation on four real-world mobile manipulation tasks demonstrates that PanoVLA achieves an average stage completion rate of 91.3\% and an end-to-end success rate of 73.4\%, substantially outperforming local-view baselines. These results demonstrate that incorporating panoramic spatial context improves spatial understanding and closed-loop manipulation performance in mobile robots.

  • 9 authors
·
Aug 2

Learning from the Best: Smoothness-Driven Metrics for Data Quality in Imitation Learning

In behavioral cloning (BC), policy performance is fundamentally limited by demonstration data quality. Real-world datasets contain trajectories of varying quality due to operator skill differences, teleoperation artifacts, and procedural inconsistencies, yet standard BC treats all demonstrations equally. Existing curation methods require costly policy training in the loop or manual annotation, limiting scalability. We propose RINSE (Ranking and INdexing Smooth Examples), a lightweight framework for scoring demonstrations based on trajectory smoothness that is policy-architecture-agnostic and operates on trajectory data alone, with TED additionally using a phase-boundary/contact signal. Grounded in motor control theory, which establishes smoothness as a hallmark of skilled movement, RINSE uses two complementary metrics: Spectral Arc Length (SAL), a spectral measure of frequency-domain regularity, and Trajectory-Envelope Distance (TED), a spatial measure of contact-aware geometric deviation. We show that smoothness filtering can reduce the conditional action variance of the retained data distribution, with downstream effects that can be amplified by action chunking and compounding error. On RoboMimic benchmarks, SAL filtering achieves 16% higher success using one-sixth of the data. On real-world manipulation, TED filtering achieves 20% improvement with half the data. As a retrieval-stage filter within STRAP on LIBERO-10, RINSE re-ranking improves mean success by 5.6%. As soft weights in Re-Mix domain reweighting, RINSE scores produce domain allocations highly correlated with the learned Re-Mix allocations (Spearman ρgeq 0.89). These results support smoothness as a useful quality signal across filtering, retrieval, and reweighting settings, especially in noisy or heterogeneous data regimes.

  • 3 authors
·
Apr 23

DATAFARM: Distribution-Aligned Task and Motion Planning for Fine-Tuning Vision-Language-Action Models

Collecting high-quality robot data remains a fundamental challenge for training robot foundation models. Task and motion planning (TAMP) offers a scalable way to generate demonstrations, but our experiments show that raw TAMP trajectories provide surprisingly little benefit when used to fine-tune pretrained vision-language-action (VLA) models, despite successfully solving the target tasks. We hypothesize that this failure arises from a behavioral distribution mismatch between planner-generated trajectories and the data used to pretrain the VLA. To address this mismatch, we introduce DATAFARM: Distribution-Aligned Task And motion planning for Fine-tuning A Robot foundation Model, an approach that incorporates the pretraining distribution directly into TAMP trajectory generation. DATAFARM aligns generated trajectories with the pretraining data in robot joint configurations, motion style, and temporal execution profiles. We evaluate DATAFARM on three tabletop manipulation tasks that TAMP can perform and a cloth-folding task beyond the capability of TAMP. DATAFARM achieves an average success rate of 56.7%, substantially outperforming raw TAMP (8.3%) while approaching human teleoperation (61.7%). On Deformable Object Manipulation, which is outside the fine-tuning distribution, the fine-tuned model retains 85% success, compared with 90% for the pretrained model. These results show that aligning planner-generated demonstrations with the pretraining distribution can make TAMP an effective source of data for VLA fine-tuning. Website and code: https://prpl-group.com/datafarm/

  • 3 authors
·
Sep 10

VISTA: Vision-Grounded and Physics-Validated Adaptation of UMI data for VLA Training

Universal Manipulation Interface (UMI) enables scalable real-world robot data collection without hardware-specific teleoperation, yet leveraging UMI data to train large-scale Vision-Language-Action (VLA) models remains fundamentally challenging. We identify two critical mismatches: wrist-mounted fisheye views, with severe radial distortion and local gripper-centric perspectives, are out-of-distribution for pretrained VLMs; and human-collected trajectories frequently violate kinematic limits, incur collisions, or exceed controller bandwidth, teaching VLA policies physically infeasible actions. To address the challenges, we present VISTA, a framework that bridges this dual gap through three synergistic components. (i)~UMI-VQA, the first large-scale VQA dataset tailored to wrist-mounted fisheye observations, aligns VLM representations to the distorted visual regime via auxiliary vision-language supervision. (ii)~A systematic physical-validation pipeline performs a data-completeness pre-check and scores each valid trajectory for trajectory continuity, self-collision risk, and execution fidelity before it enters training. (iii)~A two-stage co-training recipe jointly learns vision-language grounding on UMI-VQA and action prediction on validated trajectories. Our experiments empirically show that incorporating UMI-VQA consistently improves downstream policy performance, and that physical-validation scores are strongly predictive of deployment success. On diverse simulation and real-world manipulation tasks, VISTA significantly outperforms strong baselines including π_{0.5}, LingBot-VLA, and Wall-X. We release the physical-validation pipeline, UMI-VQA, validated trajectory data, and the pre-trained model for the community.

  • 13 authors
·
Jun 2

SABER: A Scalable Action-Based Embodied Dataset for Real-World VLA Adaptation

Robotic deployment in real-world environments depends on rich, domain-specific action data as much as on strong model architecture. General-purpose robot foundation models show modest performance in complex unseen tasks such as manipulation in a retail domain when applied out of the box. The root cause is a data gap: retail environments are structurally absent from general robot pretraining distributions, and the path to filling that gap through teleoperation is prohibitively expensive, logistically constrained, and difficult to scale. We introduce SABER, a high-fidelity retail robotics action dataset built from over 100 hours of natural in-store capture across multiple real grocery environments. Egocentric footage from head-mounted cameras records fine-grained hand activity at the point of interaction, while exocentric 360-degree scene footage from DreamVu's ALIA camera simultaneously observes all actors and activities across the entire space. This combination yields a uniquely complete picture of human retail behavior: dexterous hand activity, whole-body motion, and scene dynamics, all captured without staging, scripting, or teleoperation overhead. The SABER corpus contains 44.8K training samples across three action representation streams: 25K latent action sequences via LAPA-style encoding, 18.6K dexterous hand-pose trajectories retargeted to robot joint space, and 1.2K whole-body synchronized motion sequences retargeted to a humanoid embodiment. When applied to GR00T N1.6 via a shared-backbone multi-task post-training recipe, SABER yields a mean success rate of 29.3% across ten retail manipulation tasks -- more than 2.19x over fine-tuning baselines (13.4%). SABER demonstrates that the path to capable retail robots runs through better data, which can be collected today, at scale, without a robot in the loop. The dataset and code are available at https://dreamvu.ai/saber

  • 9 authors
·
May 9

CRISP -- Compliant ROS2 Controllers for Learning-Based Manipulation Policies and Teleoperation

Learning-based controllers, such as diffusion policies and vision-language action models, often generate low-frequency or discontinuous robot state changes. Achieving smooth reference tracking requires a low-level controller that converts high-level targets commands into joint torques, enabling compliant behavior during contact interactions. We present CRISP, a lightweight C++ implementation of compliant Cartesian and joint-space controllers for the ROS2 control standard, designed for seamless integration with high-level learning-based policies as well as teleoperation. The controllers are compatible with any manipulator that exposes a joint-torque interface. Through our Python and Gymnasium interfaces, CRISP provides a unified pipeline for recording data from hardware and simulation and deploying high-level learning-based policies seamlessly, facilitating rapid experimentation. The system has been validated on hardware with the Franka Robotics FR3 and in simulation with the Kuka IIWA14 and Kinova Gen3. Designed for rapid integration, flexible deployment, and real-time performance, our implementation provides a unified pipeline for data collection and policy execution, lowering the barrier to applying learning-based methods on ROS2-compatible manipulators. Detailed documentation is available at the project website - https://utiasDSL.github.io/crisp_controllers.

  • 6 authors
·
Sep 8, 2025

Towards a General Humanoid Loco-Manipulation Model via Egocentric Whole-Body Human Data Pretraining

Humanoid whole-body manipulation has advanced rapidly, enabling policies to coordinate locomotion, posture, bimanual interaction, and dexterous hand movements. Meanwhile, egocentric human videos provide diverse examples of everyday interactions across objects and scenes, offering scalable supervision without robot operation. However, existing supervision from these videos provides limited coverage of whole-body movement and coordination with hand-object interaction, while obtaining such supervision through humanoid teleoperation is also costly and difficult to scale. We therefore explore how human experience can support scalable learning of humanoid loco-manipulation. To support this study, we introduce HumanVerse-500, a 500-hour dataset of diverse human loco-manipulation behaviors in open-world environments, collected with a lightweight wearable system that synchronizes egocentric video with body and hand motion. Building on this dataset, we develop λ_0, a whole-body humanoid vision-language-action policy, through three-stage training that first learns interaction from diverse egocentric datasets, then coordinates body and hand motion using HumanVerse-500, and finally adapts the policy to downstream tasks and robot embodiments. Across these stages, λ_0 learns a shared representation space for human experience transfer, while domain-specific interfaces handle differences between human and robot states and actions. We evaluate λ_0 on SIMPLE and 4 real-world loco-manipulation tasks, achieving state-of-the-art performance, and further analyze its scaling behavior, generalization, and training-stage contributions to understand how human data support downstream whole-body humanoid control. We will release our code, models, and data to support further research.

  • 12 authors
·
Sep 29

Toward QoE-Driven Dynamic Control Scheme Switching for Time-Delayed Teleoperation Systems: A Dedicated Case Study

Networked teleoperation with haptic feedback is a prime example for the emerging Tactile Internet, which requires a careful orchestration of haptic communication and control. One major challenge in this context is how to maximize the user's quality-of-experience (QoE) while ensuring at the same time the stability of the global control loop in the presence of communication delay. In this paper, we propose a dynamic control scheme switching strategy for teleoperation systems, which maximizes the QoE for time-varying communication delay. In order to validate the feasibility of the proposed approach, we perform a dedicated case study for a virtual teleoperation environment consisting of a one-dimensional spring-damper system, and conduct extensive subjective tests under various delay conditions for two control schemes: (1) teleoperation with the time-domain passivity approach (TDPA), which is highly delay-sensitive but supports highly dynamic interaction between the operator and a potentially quickly changing remote environment; (2) model-mediated teleoperation (MMT), which is tolerable to relatively larger communication delays, but unsuitable for quickly changing, highly dynamic remote environments. For both schemes, we use recently proposed extensions, which incorporate perceptual data reduction to reduce the required packet rate between the operator and the teleoperator. One key contribution of this paper lies in the exploration of the intrinsic relationship among QoE, communication delay and the control schemes which provides a fundamental guidance, not only to this research, but also to the future joint optimization of communication and control for time-delayed teleoperation systems.

  • 3 authors
·
May 15, 2017

ActiveScale: Scaling Active Perception for Robots across Model, Data, and Hardware

Active perception is essential for robotic manipulation when fixed viewpoints leave task-relevant information occluded or unobserved. However, enabling vision-language-action (VLA) models to reason across changing viewpoints and actively acquire informative observations remains challenging. We present ActiveScale, a framework that advances active perception through coordinated model, data, and hardware designs. Our model augments a VLA with historical video observations and explicit camera-pose supervision, using per-frame pose tokens and a lightweight prediction head to associate observations across viewpoints and support a coherent understanding of the scene. To learn from the camera motion naturally present in human activity, we introduce a scalable human--robot mid-training recipe using 1000 hours of egocentric and robotic data, adapting the model to temporal inputs and pose supervision. We further introduce Active-perception Mobile-manipulation Platform (AMP), a robotic platform that supports active perception and mobile manipulation through single-operator teleoperation, enabling scalable collection of demonstrations that coordinate viewpoint changes and manipulation. Experiments demonstrate improved success rates on active-perception tasks, while ablation studies validate the contributions of camera-pose-aware modeling and egocentric mid-training. Together, these components provide an integrated foundation for studying and developing active perception in robotic manipulation.

  • 6 authors
·
Sep 15

SEVO: Semantic-Enhanced Virtual Observation for Robust VLA Manipulation via Active Illumination and Data-Centric Collection

Vision-Language-Action (VLA) and imitation-learning policies trained via community toolchains on low-cost hardware frequently fail when deployed outside the training environment. Existing evaluations, including the original ACT and SmolVLA benchmarks, demonstrate high success rates under controlled, fixed backgrounds, yet community practitioners report near-zero transfer to new environments. We present SEVO (Semantic-Enhanced Virtual Observation), a data-centric approach that improves cross-environment manipulation robustness without modifying the policy architecture. SEVO transforms the raw RGB camera stream through three mechanisms: (1) body-fixed cameras whose combined fields of view cover the full manipulation workspace, (2) active red-spectrum illumination that physically normalizes object appearance, and (3) real-time YOLO segmentation overlay that provides a background-invariant semantic cue. Critically, we show that a diversified data collection protocol (systematically varying lighting, backgrounds, and distractors during teleoperation) is the single most important factor for generalization. We target transparent water bottles, objects that visually blend with their surroundings, and select a simple pick-and-place task to enable hundreds of controlled real-robot trials across two mobile platforms. The full pipeline achieves 95% grasp success with ACT and 83% with SmolVLA in the training environment, transferring to novel environments at 85% and 75%. Without SEVO, the same policies achieve only 75%/70% in training and collapse to 30-35% in novel environments. Our results demonstrate that principled observation design and environmental diversity during data collection, not model scaling, enable low-cost robots to operate reliably in everyday household environments.

  • 3 authors
·
May 10

DexGarmentLab: Dexterous Garment Manipulation Environment with Generalizable Policy

Garment manipulation is a critical challenge due to the diversity in garment categories, geometries, and deformations. Despite this, humans can effortlessly handle garments, thanks to the dexterity of our hands. However, existing research in the field has struggled to replicate this level of dexterity, primarily hindered by the lack of realistic simulations of dexterous garment manipulation. Therefore, we propose DexGarmentLab, the first environment specifically designed for dexterous (especially bimanual) garment manipulation, which features large-scale high-quality 3D assets for 15 task scenarios, and refines simulation techniques tailored for garment modeling to reduce the sim-to-real gap. Previous data collection typically relies on teleoperation or training expert reinforcement learning (RL) policies, which are labor-intensive and inefficient. In this paper, we leverage garment structural correspondence to automatically generate a dataset with diverse trajectories using only a single expert demonstration, significantly reducing manual intervention. However, even extensive demonstrations cannot cover the infinite states of garments, which necessitates the exploration of new algorithms. To improve generalization across diverse garment shapes and deformations, we propose a Hierarchical gArment-manipuLation pOlicy (HALO). It first identifies transferable affordance points to accurately locate the manipulation area, then generates generalizable trajectories to complete the task. Through extensive experiments and detailed analysis of our method and baseline, we demonstrate that HALO consistently outperforms existing methods, successfully generalizing to previously unseen instances even with significant variations in shape and deformation where others fail. Our project page is available at: https://wayrise.github.io/DexGarmentLab/.

  • 10 authors
·
May 16, 2025

RynnWorld-Latent: A Cross-Embodiment World Model Conditioned on Universal Latent Actions

Learning controllable world dynamics from heterogeneous interaction videos is challenging because robot embodiments use incompatible action spaces, while human videos lack native control labels. We present RynnWorld-Latent, a cross-embodiment video world model that uses the 3D-grounded latent actions introduced by RynnLAM as a shared conditioning interface. This representation enables joint pretraining on human interaction videos, robot demonstrations, and simulation rollouts without requiring a common native action space. Built on a pretrained video transformer, RynnWorld-Latent combines global action tokens with an identity-initialized local pathway that aligns actions with future video latents. We pretrain on 23 datasets comprising approximately 553.5M frames and adapt the model to target robots through post-training. The framework supports two data-generation routes: digital teleoperation uses target robot commands to generate action-video demonstrations, while latent-action synthesis transfers source motion to an edited initial frame and pairs the resulting rollout with retargeted pseudo robot actions. Experiments show improved video prediction metrics on public benchmarks and two real-robot platforms, alongside qualitative action following when different action sequences share the same initial observation. Synthetic mid-training improves policy success rates on LIBERO and LIBERO-Plus, and both generation routes improve real-world policy success rates over real-demonstration-only training in the evaluated settings. These results support universal latent actions as a scalable interface for learning controllable visual dynamics across heterogeneous embodiments.

Alibaba-DAMO-Academy DAMO Academy
·
Oct 26 2

Dexora: Open-source VLA for High-DoF Bimanual Dexterity

Vision-Language-Action (VLA) models have recently become a central direction in embodied AI, but current systems are restricted to either dual-gripper control or single-arm dexterous hand manipulation. While low-dimensional gripper control can often be handled with simpler methods, high-dimensional dexterous hand control benefits greatly from full end-to-end VLA learning. In this work, we introduce Dexora, the first open-source VLA system that natively targets dual-arm, dual-hand high-DoF manipulation. We design a hybrid teleoperation pipeline that decouples gross arm kinematics (captured with a custom exoskeleton backpack) from fine finger motion (markerless hand tracking via Apple Vision Pro), and that drives both a physical dual-arm dual-hand platform and an identical MuJoCo digital twin. Using that interface, we assemble a large training corpus: an embodiment-matched synthetic corpus (100K simulated trajectories, 6.5M frames) and a real-world dataset of 10K teleoperated episodes (2.92M frames). To mitigate noisy teleoperation demonstrations, we propose a data-quality-aware training recipe: an offline discriminator provides clip-level weights for diffusion-transformer policy training, down-weighting low-quality demonstrations. Empirically, Dexora outperforms competitive VLA baselines on both basic and dexterous benchmarks (e.g., average dexterous success 66.7% vs. 51.7%), attains 90% success on basic tasks, and shows robust out-of-distribution and cross-embodiment generalization. Ablations confirm the importance of real data and the discriminator for dexterity.

  • 25 authors
·
May 17

RwoR: Generating Robot Demonstrations from Human Hand Collection for Policy Learning without Robot

Recent advancements in imitation learning have shown promising results in robotic manipulation, driven by the availability of high-quality training data. To improve data collection efficiency, some approaches focus on developing specialized teleoperation devices for robot control, while others directly use human hand demonstrations to obtain training data. However, the former requires both a robotic system and a skilled operator, limiting scalability, while the latter faces challenges in aligning the visual gap between human hand demonstrations and the deployed robot observations. To address this, we propose a human hand data collection system combined with our hand-to-gripper generative model, which translates human hand demonstrations into robot gripper demonstrations, effectively bridging the observation gap. Specifically, a GoPro fisheye camera is mounted on the human wrist to capture human hand demonstrations. We then train a generative model on a self-collected dataset of paired human hand and UMI gripper demonstrations, which have been processed using a tailored data pre-processing strategy to ensure alignment in both timestamps and observations. Therefore, given only human hand demonstrations, we are able to automatically extract the corresponding SE(3) actions and integrate them with high-quality generated robot demonstrations through our generation pipeline for training robotic policy model. In experiments, the robust manipulation performance demonstrates not only the quality of the generated robot demonstrations but also the efficiency and practicality of our data collection method. More demonstrations can be found at: https://rwor.github.io/

  • 12 authors
·
Jul 7, 2025

World Action Models: The Next Frontier in Embodied AI

Vision-Language-Action (VLA) models have achieved strong semantic generalization for embodied policy learning, yet they learn reactive observation-to-action mappings without explicitly modeling how the physical world evolves under intervention. A growing body of work addresses this limitation by integrating world models, predictive models of environment dynamics, into the action generation pipeline. We term this emerging paradigm World Action Models (WAMs): embodied foundation models that unify predictive state modeling with action generation, targeting a joint distribution over future states and actions rather than actions alone. However, the literature remains fragmented across architectures, learning objectives, and application scenarios, lacking a unified conceptual framework. We formally define WAMs and disambiguate them from related concepts, and trace the foundations and early integration of VLA and world model research that gave rise to this paradigm. We organize existing methods into a structured taxonomy of Cascaded and Joint WAMs, with further subdivision by generation modality, conditioning mechanism, and action decoding strategy. We systematically analyze the data ecosystem fueling WAMs development, spanning robot teleoperation, portable human demonstrations, simulation, and internet-scale egocentric video, and synthesize emerging evaluation protocols organized around visual fidelity, physical commonsense, and action plausibility. Overall, this survey provides the first systematic account of the WAMs landscape, clarifies key architectural paradigms and their trade-offs, and identifies open challenges and future opportunities for this rapidly evolving field.

OpenMOSS-Team OpenMOSS
·
May 11 2

EgoRecovery: Acquiring Failure Recovery Ability Through Human Recovery Demonstration

Robust embodied robots should be able to recover from failures and retry tasks in order to operate reliably in unstructured and noisy real-world environments. Achieving this capability requires training policies on data that captures recovery behaviors. However, collecting such data through robot teleoperation is difficult to scale, as it is time-consuming to induce diverse failure states, perform corrective actions, and reset the environment. This challenge is further exacerbated by the high diversity of failure modes, which demands substantially more recovery data than success demonstrations. In this work, we show that egocentric human data capturing failure recovery processes provides a scalable alternative. By efficiently arranging task-level failure configurations and recording short recovery segments, human operators can generate more than 10x as much valid recovery data per hour compared to robot teleoperation under our protocol. To address the embodiment gap between human and robot, we propose EgoRecovery, a co-training framework for learning recovery behavior, where human recovery demonstrations are aligned to a compact corrective-intent space shared with robot data, which captures the timing and magnitude of correction. Only a small number of robot recovery demonstrations are required to connect this intent to executable robot actions. At deployment, a learned recovery gate predicts when correction is needed from robot observations and activates the corrective intent only in recovery states. Experiments on real-world recovery tasks show that EgoRecovery improves success from failure starts over robot-only recovery, direct co-training with human recovery data, and direct intent-transfer baselines.

  • 11 authors
·
Jul 22

SIMPLE: Simulation-Based Policy Learning and Evaluation for Humanoid Loco-manipulation

Humanoid foundation models are advancing faster than we can evaluate them. While real-world testing is expensive and difficult to reproduce, existing simulation benchmarks focus primarily on table-top or wheeled robots. A scalable and reproducible benchmark for whole-body humanoid loco-manipulation remains an open problem. To this end, we present SIMPLE, a unified simulation testbed for humanoid policy learning and evaluation. SIMPLE couples the accurate contact-rich dynamics of MuJoCo with the photorealistic rendering of IsaacSim. It provides a large-scale environment comprising 60 diverse whole-body tasks, 50 indoor scenes, and over 1,000 object assets. To facilitate scalable data collection, the framework integrates two data generation pipelines: automated trajectory generation via motion planning and a low-latency VR teleoperation interface. We further integrate and benchmark mainstream humanoid policies at scale in SIMPLE, including lightweight imitation networks, large vision-language-action (VLA) models, and recent world action models (WAMs). Our experiments reveal a strong correlation between policy performance in simulation and the real world. Furthermore, we demonstrate that policies trained on data collected in SIMPLE can be transferred zero-shot to physical humanoid robots under similar settings, providing a robust and reproducible foundation for humanoid robotics research.

  • 12 authors
·
Jun 5

DexHiL: A Human-in-the-Loop Framework for Vision-Language-Action Model Post-Training in Dexterous Manipulation

While Vision-Language-Action (VLA) models have demonstrated promising generalization capabilities in robotic manipulation, deploying them on specific and complex downstream tasks still demands effective post-training. In parallel, Human-in-the-Loop (HiL) learning has proven to be a powerful mechanism for refining robot policies. However, extending this paradigm to dexterous manipulation remains challenging: multi-finger control is high-dimensional, contact-intensive, and exhibits execution distributions that differ markedly from standard arm motions, leaving existing dexterous VLA systems limited in reliability and adaptability. We present DexHiL, the first integrated arm-hand human-in-the-loop framework for dexterous VLA models, enabling coordinated interventions over the arm and the dexterous hand within a single system. DexHiL introduces an intervention-aware data sampling strategy that prioritizes corrective segments for post-training, alongside a lightweight teleoperation interface that supports instantaneous human corrections during execution. Real-robot experiments demonstrate that DexHiL serves as an effective post-training framework, yielding a substantial performance leap, outperforming standard offline-only fine-tuning baselines by an average of 25% in success rates across distinct tasks. Project page: https://chenzhongxi-sjtu.github.io/dexhil/

  • 8 authors
·
Mar 9

E-VLA: Event-Augmented Vision-Language-Action Model for Dark and Blurred Scenes

Robotic Vision-Language-Action (VLA) models generalize well for open-ended manipulation, but their perception is fragile under sensing-stage degradations such as extreme low light, motion blur, and black clipping. We present E-VLA, an event-augmented VLA framework that improves manipulation robustness when conventional frame-based vision becomes unreliable. Instead of reconstructing images from events, E-VLA directly leverages motion and structural cues in event streams to preserve semantic perception and perception-action consistency under adverse conditions. We build an open-source teleoperation platform with a DAVIS346 event camera and collect a real-world synchronized RGB-event-action manipulation dataset across diverse tasks and illumination settings. We also propose lightweight, pretrained-compatible event integration strategies and study event windowing and fusion for stable deployment. Experiments show that even a simple parameter-free fusion, i.e., overlaying accumulated event maps onto RGB images, could substantially improve robustness in dark and blur-heavy scenes: on Pick-Place at 20 lux, success increases from 0% (image-only) to 60% with overlay fusion and to 90% with our event adapter; under severe motion blur (1000 ms exposure), Pick-Place improves from 0% to 20-25%, and Sorting from 5% to 32.5%. Overall, E-VLA provides systematic evidence that event-driven perception can be effectively integrated into VLA models, pointing toward robust embodied intelligence beyond conventional frame-based imaging. Code and dataset will be available at https://github.com/JJayzee/E-VLA.

  • 5 authors
·
Apr 5

CARD: Contact-Anchored Retargeting for Dexterous Manipulation

Humans are dexterous, but traditional data collection paradigms such as teleoperation, kinesthetic teaching, and wearable exoskeletons force humans to act through the robot embodiment, bottlenecking their dexterity. Retargeting can avoid this. However, existing methods purely translate kinematics and ignore the real-world contact dynamics essential for task success. We present CARD: Contact-Anchored Retargeting for Dexterous Manipulation, a simulator and object-free framework that retargets human demonstrations to robot actions by explicitly preserving contact force targets. CARD unifies human data sources including video, motion capture, and tactile gloves via a shared hand--contact representation and generates explicit contact force targets in addition to kinematics. To maintain these contact targets during hardware open-loop replay, CARD also introduces a tactile tracking controller. For video which does not contain an explicit tactile source, we present Vid-HACO, our video-to-contact model that sets a new state of the art. Across our video, glove, motion-capture data and the GRAB dataset, CARD maintains contact on 43--78% of contact frames, while kinematic and object-aware retargeting methods maintain contact on <10% and 22.5% of the frames respectively. Further, integrating our formulation into physics-based retargeting improves strict task success from 12\% to 32\% on GRAB dataset. Finally, we show that our tactile tracker is critical to reproduce demonstrated forces during hardware replay. These results establish that contact preservation via CARD is a scalable interface for transferring human dexterity to robots.

  • 10 authors
·
Oct 26