Daily Papers

Accurately predicting protein melting temperature changes (Delta Tm) is fundamental for assessing protein stability and guiding protein engineering. Leveraging multi-modal protein representations has shown great promise in capturing the complex relationships among protein sequences, structures, and functions. In this study, we develop models based on powerful protein language models, including ESM-2, ESM-3 and AlphaFold, using various feature extraction methods to enhance prediction accuracy. By utilizing the ESM-3 model, we achieve a new state-of-the-art performance on the s571 test dataset, obtaining a Pearson correlation coefficient (PCC) of 0.50. Furthermore, we conduct a fair evaluation to compare the performance of different protein language models in the Delta Tm prediction task. Our results demonstrate that integrating multi-modal protein representations could advance the prediction of protein melting temperatures.

This paper describes a method combining Bayesian optimization (BO) and a lamped-capacitance thermal circuit network model that is effective for speeding up the thermal design optimization of an electronic circuit board layout with transient heating chips. As electronic devices have become smaller and more complex, the importance of thermal design optimization to ensure heat dissipation performance has increased. However, such thermal design optimization is difficult because it is necessary to consider various trade-offs associated with packaging and transient temperature changes of heat-generating components. This study aims to improve the performance of thermal design optimization by artificial intelligence. BO using a Gaussian process was combined with the lamped-capacitance thermal circuit network model, and its performance was verified by case studies. As a result, BO successfully found the ideal circuit board layout as well as particle swarm optimization (PSO) and genetic algorithm (GA) could. The CPU time for BO was 1/5 and 1/4 of that for PSO and GA, respectively. In addition, BO found a non-intuitive optimal solution in approximately 7 minutes from 10 million layout patterns. It was estimated that this was 1/1000 of the CPU time required for analyzing all layout patterns.

The increasing popularity of large language models has not only led to widespread use but has also brought various risks, including the potential for systematically spreading fake news. Consequently, the development of classification systems such as DetectGPT has become vital. These detectors are vulnerable to evasion techniques, as demonstrated in an experimental series: Systematic changes of the generative models' temperature proofed shallow learning-detectors to be the least reliable. Fine-tuning the generative model via reinforcement learning circumvented BERT-based-detectors. Finally, rephrasing led to a >90\% evasion of zero-shot-detectors like DetectGPT, although texts stayed highly similar to the original. A comparison with existing work highlights the better performance of the presented methods. Possible implications for society and further research are discussed.

Large Language Models (LLMs) are increasingly used as probabilistic generators for simulation, synthetic data generation, and decision support in settings where real-world data are unavailable. Yet, the structure and reliability of the distributions they produce remain understudied. Here, we systematically analyze LLM-generated distributions of preferences for air travel, restaurants, and consumer products. Encouragingly, all models considered in our analysis exhibit self-coherence, with the most probable outcomes stabilizing rapidly under repeated sampling. At the same time, we observe substantial discordance across both model families and scales, with little consensus even among their most probable outcomes. These patterns hold across nine open-weight models, three choice domains, and show robustness under temperature changes, greedy decoding, and perturbations of prompt and ordering. Our findings indicate that outcomes are influenced more by the choice of model than by the wording of the prompt, challenging the common assumption that sufficiently capable LLMs produce similar preference distributions when used as stand-ins for survey respondents.

Calibrating large-scale camera arrays, such as those in dome-based setups, is time-intensive and typically requires dedicated captures of known patterns. While extrinsics in such arrays are fixed due to the physical setup, intrinsics often vary across sessions due to factors like lens adjustments or temperature changes. In this paper, we propose a dense-feature-driven multi-frame calibration method that refines intrinsics directly from scene data, eliminating the necessity for additional calibration captures. Our approach enhances traditional Structure-from-Motion (SfM) pipelines by introducing an extrinsics regularization term to progressively align estimated extrinsics with ground-truth values, a dense feature reprojection term to reduce keypoint errors by minimizing reprojection loss in the feature space, and an intrinsics variance term for joint optimization across multiple frames. Experiments on the Multiface dataset show that our method achieves nearly the same precision as dedicated calibration processes, and significantly enhances intrinsics and 3D reconstruction accuracy. Fully compatible with existing SfM pipelines, our method provides an efficient and practical plug-and-play solution for large-scale camera setups. Our code is publicly available at: https://github.com/YJJfish/Multi-Cali-Anything

A stochastic energetics framework is applied to examine how periodically shifting the frequency of a time-dependent oscillating temperature gradient affects heat transport in a nanoscale molecular model. We specifically examine the effects that frequency switching, i.e., instantaneously changing the oscillation frequency of the temperature gradient, has on the shape of the heat transport hysteresis curves generated by a particle connected to two thermal baths, each with a temperature that is oscillating in time. Analytical expressions are derived for the energy fluxes in/out of the system and the baths, with excellent agreement observed between the analytical expressions and the results from nonequilibrium molecular dynamics simulations. We find that the shape of the heat transport hysteresis curves can be significantly altered by shifting the frequency between fast and slow oscillation regimes. We also observe the emergence of features in the hysteresis curves such as pinched loops and complex multi-loop patterns due to the frequency shifting. The presented results have implications in the design of thermal neuromorphic devices such as thermal memristors and thermal memcapacitors.

In this research study, we empirically investigate the effect of sampling temperature on the performance of Large Language Models (LLMs) on various problem-solving tasks. We created a multiple-choice question-and-answer (MCQA) exam by randomly sampling problems from standard LLM benchmarks. Then, we used nine popular LLMs with five prompt-engineering techniques to solve the MCQA problems while increasing the sampling temperature from 0.0 to 1.6. Despite anecdotal reports to the contrary, our empirical results indicate that changes in temperature from 0.0 to 1.0 do not have a statistically significant impact on LLM performance for problem-solving tasks. In addition, these results appear to generalize across LLMs, prompt-engineering techniques, and problem domains. All code, data, and supplemental materials are available on GitHub at: https://github.com/matthewrenze/jhu-llm-temperature

Topological kagome systems have been a topic of great interest in condensed matter physics due totheir unique electronic properties. The vanadium-based kagome materials are particularly intrigu-ing since they exhibit exotic phenomena such as charge density wave (CDW) and unconventionalsuperconductivity. The origin of these electronic instabilities is not fully understood, and the re-cent discovery of a charge density wave in ScV6Sn6provides a new avenue for investigation. In thiswork, we investigate the electronic structure of the novel kagome metal ScV6Sn6using angle resolvedphotoemission spectroscopy (ARPES), scanning tunneling microscopy (STM), and first-principlesdensity functional theory calculations. Our analysis reveals for the first time the temperature-dependent band changes of ScV6Sn6and identifies a new band that exhibits a strong signatureof a structure with CDW below the critical temperature. Further analysis revealed that this newband is due to the surface kagome layer of the CDW structure. In addition, a Lifshitz transition isidentified in the ARPES spectra that is related to the saddle point moving across the Fermi levelat the critical temperature for the CDW formation. This result shows the CDW behavior may alsobe related to nesting of the saddle point, similar to related materials. However, no energy gap is observed at the Fermi level and thus the CDW is not a typical Fermi surface nesting scenario. These results provide new insights into the underlying physics of the CDW in the kagome materials and could have implications for the development of materials with new functionality.

The undergoing energy transition is causing behavioral changes in electricity use, e.g. with self-consumption of local generation, or flexibility services for demand control. To better understand these changes and the challenges they induce, accessing individual smart meter data is crucial. Yet this is personal data under the European GDPR. A widespread use of such data requires thus to create synthetic realistic and privacy-preserving samples. This paper introduces a new synthetic load curve dataset generated by conditional latent diffusion. We also provide the contracted power, time-of-use plan and local temperature used for generation. Fidelity, utility and privacy of the dataset are thoroughly evaluated, demonstrating its good quality and thereby supporting its interest for energy modeling applications.

The sampling temperature, a critical hyperparameter in large language models (LLMs), modifies the logits before the softmax layer, thereby reshaping the distribution of output tokens. Recent studies have challenged the Stochastic Parrots analogy by demonstrating that LLMs are capable of understanding semantics rather than merely memorizing data and that randomness, modulated by sampling temperature, plays a crucial role in model inference. In this study, we systematically evaluated the impact of temperature in the range of 0 to 2 on data sets designed to assess six different capabilities, conducting statistical analyses on open source models of three different sizes: small (1B--4B), medium (6B--13B), and large (40B--80B). Our findings reveal distinct skill-specific effects of temperature on model performance, highlighting the complexity of optimal temperature selection in practical applications. To address this challenge, we propose a BERT-based temperature selector that takes advantage of these observed effects to identify the optimal temperature for a given prompt. We demonstrate that this approach can significantly improve the performance of small and medium models in the SuperGLUE datasets. Furthermore, our study extends to FP16 precision inference, revealing that temperature effects are consistent with those observed in 4-bit quantized models. By evaluating temperature effects up to 4.0 in three quantized models, we find that the Mutation Temperature -- the point at which significant performance changes occur -- increases with model size.

With copper-substituted lead apatite below room temperature, we observe diamagnetic dc magnetization under magnetic field of 25 Oe with remarkable bifurcation between zero-field-cooling and field-cooling measurements, and under 200 Oe it changes to be paramagnetism. A glassy memory effect is found during cooling. Typical hysteresis loops for superconductors are detected below 250 K, along with an asymmetry between forward and backward sweep of magnetic field. Our experiment suggests at room temperature the Meissner effect is possibly present in this material.

While autoregressive machine-learning-based emulators have been trained to produce stable and accurate rollouts in the climate of the present-day and recent past, none so far have been trained to emulate the sensitivity of climate to substantial changes in CO_2 or other greenhouse gases. As an initial step we couple the Ai2 Climate Emulator version 2 to a slab ocean model (hereafter ACE2-SOM) and train it on output from a collection of equilibrium-climate physics-based reference simulations with varying levels of CO_2. We test it in equilibrium and non-equilibrium climate scenarios with CO_2 concentrations seen and unseen in training. ACE2-SOM performs well in equilibrium-climate inference with both in-sample and out-of-sample CO_2 concentrations, accurately reproducing the emergent time-mean spatial patterns of surface temperature and precipitation change with CO_2 doubling, tripling, or quadrupling. In addition, the vertical profile of atmospheric warming and change in extreme precipitation rates with increased CO_2 closely agree with the reference model. Non-equilibrium-climate inference is more challenging. With CO_2 increasing gradually at a rate of 2% year^{-1}, ACE2-SOM can accurately emulate the global annual mean trends of surface and lower-to-middle atmosphere fields but produces unphysical jumps in stratospheric fields. With an abrupt quadrupling of CO_2, ML-controlled fields transition unrealistically quickly to the 4xCO_2 regime. In doing so they violate global energy conservation and exhibit unphysical sensitivities of and surface and top of atmosphere radiative fluxes to instantaneous changes in CO_2. Future emulator development needed to address these issues should improve its generalizability to diverse climate change scenarios.

Vision-Language Models (VLMs), such as recent Qwen and Gemini models, are positioned as general-purpose AI systems capable of reasoning across domains. Yet their capabilities in scientific imaging, especially on unfamiliar and potentially previously unseen data distributions, remain poorly understood. In this work, we assess whether generic VLMs, presumed to lack exposure to astronomical corpora, can perform morphology-based classification of radio galaxies using the MiraBest FR-I/FR-II dataset. We explore prompting strategies using natural language and schematic diagrams, and, to the best of our knowledge, we are the first to introduce visual in-context examples within prompts in astronomy. Additionally, we evaluate lightweight supervised adaptation via LoRA fine-tuning. Our findings reveal three trends: (i) even prompt-based approaches can achieve good performance, suggesting that VLMs encode useful priors for unfamiliar scientific domains; (ii) however, outputs are highly unstable, i.e. varying sharply with superficial prompt changes such as layout, ordering, or decoding temperature, even when semantic content is held constant; and (iii) with just 15M trainable parameters and no astronomy-specific pretraining, fine-tuned Qwen-VL achieves near state-of-the-art performance (3% Error rate), rivaling domain-specific models. These results suggest that the apparent "reasoning" of VLMs often reflects prompt sensitivity rather than genuine inference, raising caution for their use in scientific domains. At the same time, with minimal adaptation, generic VLMs can rival specialized models, offering a promising but fragile tool for scientific discovery.

Severe convective weather events, such as hail, tornadoes, and thunderstorms, often occur quickly yet cause significant damage, costing billions of dollars every year. This highlights the importance of forecasting severe weather threats hours in advance to better prepare meteorologists and residents in at-risk areas. Can modern large foundation models perform such forecasting? Existing weather benchmarks typically focus only on predicting time-series changes in certain weather parameters (e.g., temperature, moisture) with text-only features. In this work, we introduce WeatherQA, the first multimodal dataset designed for machines to reason about complex combinations of weather parameters (a.k.a., ingredients) and predict severe weather in real-world scenarios. The dataset includes over 8,000 (multi-images, text) pairs for diverse severe weather events. Each pair contains rich information crucial for forecasting -- the images describe the ingredients capturing environmental instability, surface observations, and radar reflectivity, and the text contains forecast analyses written by human experts. With WeatherQA, we evaluate state-of-the-art vision language models, including GPT4, Claude3.5, Gemini-1.5, and a fine-tuned Llama3-based VLM, by designing two challenging tasks: (1) multi-choice QA for predicting affected area and (2) classification of the development potential of severe convection. These tasks require deep understanding of domain knowledge (e.g., atmospheric dynamics) and complex reasoning over multimodal data (e.g., interactions between weather parameters). We show a substantial gap between the strongest VLM, GPT4o, and human reasoning. Our comprehensive case study with meteorologists further reveals the weaknesses of the models, suggesting that better training and data integration are necessary to bridge this gap. WeatherQA link: https://github.com/chengqianma/WeatherQA.

We demonstrate an all solid state semiconductor device, based on epitaxial single crystalline metal halide perovskites, enabling reversible control of a perovskite photoluminescence with a gate voltage. Fundamentally distinct from electroluminescent diodes, such a photoluminescence field effect transistor uses the gate electric field to electrostatically modulate the interfacial density of mobile charges, thereby affecting the radiative and nonradiative recombination channels of photocarriers. Varying the gate voltage in such transistors efficiently changes the rate of nonradiative interfacial recombination and modulates the photoluminescence intensity by 65 to 98 percent (depending on temperature). At favorable gating, nearly complete elimination of non-radiative losses can be achieved. This functionality, coupled with the strong visible-range absorption and emission, possible due to the high absorption coefficient, as well as controllable thickness and macroscopically homogeneous morphology of epitaxial perovskite films, leads to high external photoluminescence quantum efficiencies realized in large-area, thin-film devices. Such high-efficiency, scalable, electrostatically tunable optoelectronic switches broaden the potential applications of metal-halide perovskites in photonics and optoelectronics.

The Verwey transition in magnetite is a benchmark electronically driven phase transition that is highly sensitive to lattice imperfections and external perturbations. Doping, deviations from oxygen stoichiometry, and irradiation-induced point defects are known to lower the Verwey transition temperature, T_{rm V}. By contrast, the role of remanent strain fields and extended defect structures generated by uniaxial stress has remained largely unexplored. Here we combine dark-field x-ray microscopy (DFXM) and ac magnetic susceptibility to determine how strain-induced defects affect the Verwey transition in stoichiometric single-crystalline magnetite after uniaxial compression and unloading. The DFXM measurements were performed on two samples compressed along the same [011] direction: loading to 200~MPa generated stable line-like defects and remanent strain fields, whereas loading beyond the fracture threshold produced denser defect networks and mechanical fracture. To test the effect of a different loading geometry, we also measured the ac susceptibility of a sample fractured by compression along [001]. Real-space DFXM imaging, lattice-orientation mapping, and residual strain mapping show substantial remanent structural disorder after compression. Nevertheless, neither the transition temperature T_{rm V} nor the sharpness of the transition changes measurably in any of the compressed or fractured samples. This behavior contrasts with the strong suppression of T_{rm V} by point-like disorder. Our results show that extended line-like defects and remanent strain fields produced by plastic deformation do not measurably perturb the macroscopic electronic ordering responsible for the Verwey transition, thereby distinguishing the effects of point defects from those of extended slip-related defects in magnetite.

Green's functions are a useful technique for interpreting atmospheric state responses to changes in the spatial pattern of sea surface temperature (SST). Here we train version 2 of the Ai2 Climate Emulator (ACE2) on reference historical SST simulations of the US Department of Energy's EAMv3 global atmosphere model. We compare how well the SST Green's functions generated by ACE2 match those of EAMv3, following the protocol of the Green's Function Model Intercomparison Project (GFMIP). The spatial patterns of top-of-atmosphere (TOA) radiative response from the individual GFMIP SST patch simulations are similar for ACE and the EAMv3 reference. The derived sensitivity of global net TOA radiation sensitivity to SST patch location is qualitatively similar in ACE as in EAMv3, but there are statistically significant discrepancies for some SST patches, especially over the subtropical northeast Pacific. These discrepancies may reflect insufficient diversity in the SST patterns sampled over the course of the EAMv3 AMIP simulation used for training ACE. Both ACE and EAMv3 Green's functions reconstruct the historical record of the global annual-mean TOA radiative flux from a reference EAMv3 AMIP simulation reasonably well. Notably, under our configuration and compute resources, ACE achieves these results approximately 100 times faster in wall-clock time compared to EAMv3, highlighting its potential as a powerful and efficient tool for tackling other computationally intensive problems in climate science.

AI-generated text (AIGT) detection can be sensitive to the decoding choices of the source large language model (LLM). We observe that perturbing next-token logits or adjusting sampling temperature can reduce detection performance, providing a clear signal of detector vulnerability to decoding-time distribution changes. Building on this observation, we propose EASE (Entropy-Adaptive Distribution Shaping for Evasion), a training-free and detector-agnostic framework for evading AIGT detectors. EASE computes predictive entropy directly from the source LLM's next-token distribution and uses it to adapt both logit perturbation and sampling temperature, without detector feedback or model fine-tuning. Experiments across three source LLMs and multiple detectors demonstrate consistent reductions in detection performance, with negligible degradation in text quality and negligible inference overhead.

We use new interior models of cold planets to investigate the mass-radius relationships of solid exoplanets, considering planets made primarily of iron, silicates, water, and carbon compounds. We find that the mass-radius relationships for cold terrestrial-mass planets of all compositions we considered follow a generic functional form that is not a simple power law: log_{10} R_s = k_1 + 1/3 log_{10}(M_s) - k_2 M_s^{k_3} for up to M_p approx 20 M_{oplus}, where M_s and R_s are scaled mass and radius values. This functional form arises because the common building blocks of solid planets all have equations of state that are well approximated by a modified polytrope of the form rho = rho_0 + c P^n. We find that highly detailed planet interior models, including temperature structure and phase changes, are not necessary to derive solid exoplanet bulk composition from mass and radius measurements. For solid exoplanets with no substantial atmosphere we have also found that: with 5% fractional uncertainty in planet mass and radius it is possible to distinguish among planets composed predominantly of iron or silicates or water ice but not more detailed compositions; with sim~5% uncertainty water ice planets with gtrsim 25% water by mass may be identified; the minimum plausible planet size for a given mass is that of a pure iron planet; and carbon planet mass-radius relationships overlap with those of silicate and water planets due to similar zero-pressure densities and equations of state. We propose a definition of "super Earths'' based on the clear distinction in radii between planets with significant gas envelopes and those without.

Clouds play a significant role in global temperature regulation through their effect on planetary albedo. Anthropogenic emissions of aerosols can alter the albedo of clouds, but the extent of this effect, and its consequent impact on temperature change, remains uncertain. Human-induced clouds caused by ship aerosol emissions, commonly referred to as ship tracks, provide visible manifestations of this effect distinct from adjacent cloud regions and therefore serve as a useful sandbox to study human-induced clouds. However, the lack of large-scale ship track data makes it difficult to deduce their general effects on cloud formation. Towards developing automated approaches to localize ship tracks at scale, we present CloudTracks, a dataset containing 3,560 satellite images labeled with more than 12,000 ship track instance annotations. We train semantic segmentation and instance segmentation model baselines on our dataset and find that our best model substantially outperforms previous state-of-the-art for ship track localization (61.29 vs. 48.65 IoU). We also find that the best instance segmentation model is able to identify the number of ship tracks in each image more accurately than the previous state-of-the-art (1.64 vs. 4.99 MAE). However, we identify cases where the best model struggles to accurately localize and count ship tracks, so we believe CloudTracks will stimulate novel machine learning approaches to better detect elongated and overlapping features in satellite images. We release our dataset openly at {zenodo.org/records/10042922}.

What is certain is that surface temperatures around the globe vary considerably, regardless of the time scales or underlying causes. Since 1850, we have observed an average increase in global surface temperature anomalies of 1.2^{circ} and a median increase of 0.7^{circ}: this overall difference masks significant regional differences. Nearly 60\% of the world's population now lives in urban areas, where vegetation cover has been significantly reduced, despite the paradoxical fact that vegetation plays an important role in regulating the thermal environment (eg through the shading provided by tree canopies). Continuous electrical and thermal measurements of trees in a Parisian grove (France) show and quantify that canopies are not the only protectors against heat waves; we must also consider the role of tree trunks. It is clear that these trunks probably regulate themselves, possibly by modulating the uptake of groundwater, whose geothermal stability is well established at a depth of just one meter. This quantitative observation should not be overlooked in the urban planning of our cities.

Climate change is increasing the intensity and frequency of many extreme weather events, including heatwaves, which results in increased thermal discomfort and mortality rates. While global mitigation action is undoubtedly necessary, so is climate adaptation, e.g., through climate-sensitive urban planning. Among the most promising strategies is harnessing the benefits of urban trees in shading and cooling pedestrian-level environments. Our work investigates the challenge of optimal placement of such trees. Physical simulations can estimate the radiative and thermal impact of trees on human thermal comfort but induce high computational costs. This rules out optimization of tree placements over large areas and considering effects over longer time scales. Hence, we employ neural networks to simulate the point-wise mean radiant temperatures--a driving factor of outdoor human thermal comfort--across various time scales, spanning from daily variations to extended time scales of heatwave events and even decades. To optimize tree placements, we harness the innate local effect of trees within the iterated local search framework with tailored adaptations. We show the efficacy of our approach across a wide spectrum of study areas and time scales. We believe that our approach is a step towards empowering decision-makers, urban designers and planners to proactively and effectively assess the potential of urban trees to mitigate heat stress.

In 2023, the global mean temperature soared to 1.48K above the pre-industrial level, surpassing the previous record by 0.17K. Previous best-guess estimates of known drivers including anthropogenic warming and the El Nino onset fall short by about 0.2K in explaining the temperature rise. Utilizing satellite and reanalysis data, we identify a record-low planetary albedo as the primary factor bridging this gap. The decline is caused largely by a reduced low-cloud cover in the northern mid-latitudes and tropics, in continuation of a multi-annual trend. Understanding how much of the low-cloud trend is due to internal variability, reduced aerosol concentrations, or a possibly emerging low-cloud feedback will be crucial for assessing the current and expected future warming.

Humanity spends an increasing proportion of its time interacting online. Scholars are intensively investigating the societal drivers and resultant impacts of this collective shift in our allocation of time and attention. Yet, the external factors that regularly shape online behavior remain markedly understudied. Do environmental factors alter rates of online activity? Here we show that adverse meteorological conditions markedly increase social media use in the United States. To do so, we employ climate econometric methods alongside over three and a half billion social media posts from tens of millions of individuals from both Facebook and Twitter between 2009 and 2016. We find that more extreme temperatures and added precipitation each independently amplify social media activity. Weather that is adverse on both the temperature and precipitation dimensions produces markedly larger increases in social media activity. On average across both platforms, compared to the temperate weather baseline, days colder than -5°C with 1.5-2cm of precipitation elevate social media activity by 35%. This effect is nearly three times the typical increase in social media activity observed on New Year's Eve in New York City. We observe meteorological effects on social media participation at both the aggregate and individual level, even accounting for individual-specific, temporal, and location-specific potential confounds.

Detecting and attributing temperature increases due to climate change is crucial for understanding global warming and guiding adaptation strategies. The complexity of distinguishing human-induced climate signals from natural variability has challenged traditional detection and attribution (D&A) approaches, which seek to identify specific "fingerprints" in climate response variables. Deep learning offers potential for discerning these complex patterns in expansive spatial datasets. However, lack of standard protocols has hindered consistent comparisons across studies. We introduce ClimDetect, a standardized dataset of over 816k daily climate snapshots, designed to enhance model accuracy in identifying climate change signals. ClimDetect integrates various input and target variables used in past research, ensuring comparability and consistency. We also explore the application of vision transformers (ViT) to climate data, a novel and modernizing approach in this context. Our open-access data and code serve as a benchmark for advancing climate science through improved model evaluations. ClimDetect is publicly accessible via Huggingface dataet respository at: https://huggingface.co/datasets/ClimDetect/ClimDetect.

Understanding how households consume electricity in response to socioeconomic and climatic drivers is important for decision-makers designing energy policies in a changing climate and under geopolitical tensions. Consumers respond differently to thermal stress depending on income, consumption habits and the surrounding built environment, a nonlinear behaviour that most approaches oversimplify. In this study, households are treated as agents interacting with complex environments, and Inverse Reinforcement Learning is used to represent their consumption behaviour as model implied reward functions. Specifically, we observe how these reward functions change when households undergo socioeconomic and climatic shocks. The framework is tested on different clusters of electricity consumption profiles in Italy. Clusters' reward functions are retrieved and used to understand how cooling behaviour changes from summer 2021 to summer 2022 and 2023, before, during and after the energy crisis and a heatwave. We find that these shocks reshaped cooling behaviour heterogeneously across consumer groups, in directions conditioned by their prior habits and built environment. Across the 2021 to 2023 summers, we identify a spectrum of responses: transient adjustments that receded as the shocks eased, durable shifts persisting into 2023, and consumers exhibiting negligible change. At the intradaily scale, groups comparable in socioeconomic and environmental context but differing in their daily timing of consumption responded distinctly, identifying time of use as a separate dimension of behavioural heterogeneity. Energy policies and demand-response schemes should therefore account not only for who consumers are and where they live, but for when they consume and whether their response to a shock persists.

The subpolar gyre is at risk of crossing a tipping point under future climate change associated with the collapse of deep convection. As such tipping can have significant climate impacts, it is important to understand the mechanisms at play and how they are represented in modern climate models. In this study we use causal inference to investigate the representation of several proposed mechanisms of subpolar gyre variability in CMIP6 models. As expected, an increase in sea surface salinity or a decrease in sea surface temperature leads to an increase in mixed layer depth in nearly all CMIP6 models due to an intensification of deep convection. However, the effect of convection to modify sea surface temperature due to re-stratification is less clear. In most models the deepening of the mixed layer caused by an increase of sea surface salinity, does result in a cooling of the water at intermediate depths. The feedback from the subsurface temperature through density to the strength of the subpolar gyre circulation is more ambiguous, with fewer models indicating a significant link. Those that do show a significant link, do not agree on its sign. The CMIP6 models that have the expected sign for the links from density to the subpolar gyre strength and on to sea surface salinity, are also the models in which abrupt shifts in the subpolar gyre region have been found in climate change scenario runs. One model (CESM2) contains all proposed mechanisms, with both a negative and delayed positive feedback loop being significant.

Urban populations are increasingly exposed to extreme heat events such as heatwaves, which can be exacerbated in cities due to the urban heat island (UHI) effect. With the aim of developing adaptation strategies, recent years have seen a growing interest in deploying high-resolution measurement networks using low-cost devices (LCDs), which enable the evaluation of intra-urban temperature distribution and its impacts at an unprecedented spatial resolution. However, the reliability of LCD measurements has been called into question, especially regarding potential overheating due to inadequate radiation shielding. In this study, we develop a statistical method to correct temperature biases based on short-wave radiation using a generalized additive model (GAM) and then apply it to LCD measurements in the urban climate networks of the cities of Bern, Lausanne, Neuchatel and Zurich (Switzerland). To that end, we first calibrate the correction procedure to the LCD models used in each city using an intercomparison field study, in which the LCD models are collocated next to a professional automated weather station (AWS) operated by MeteoSwiss in the rural surroundings of Bern. Then, we evaluate how these corrections can influence two climate indices, namely the number of tropical nights and the number of heat warnings issued in each city according to MeteoSwiss heat warning system. The findings suggest that the current AWS underestimate the heat warnings, whereas some LCD models likely overestimate them due to radiative errors. Nevertheless, uncorrected LCD measurements still provide a more reliable estimate of urban temperatures than AWS located outside urban settings. The insights can guide selection of LCD models for new monitoring networks and support the application of model-specific radiative bias corrections to existing LCDs, enabling more accurate assessments of heat and its impacts.

Climate change communication in the mass media and other textual sources may affect and shape public perception. Extracting climate change information from these sources is an important task, e.g., for filtering content and e-discovery, sentiment analysis, automatic summarization, question-answering, and fact-checking. However, automating this process is a challenge, as climate change is a complex, fast-moving, and often ambiguous topic with scarce resources for popular text-based AI tasks. In this paper, we introduce ClimaText, a dataset for sentence-based climate change topic detection, which we make publicly available. We explore different approaches to identify the climate change topic in various text sources. We find that popular keyword-based models are not adequate for such a complex and evolving task. Context-based algorithms like BERT devlin2018bert can detect, in addition to many trivial cases, a variety of complex and implicit topic patterns. Nevertheless, our analysis reveals a great potential for improvement in several directions, such as, e.g., capturing the discussion on indirect effects of climate change. Hence, we hope this work can serve as a good starting point for further research on this topic.

Near-surface air temperature is a key physical property of the Earth's surface. Although weather stations offer continuous monitoring and satellites provide broad spatial coverage, no single data source offers seamless data in a spatiotemporal fashion. Here, we propose a data-driven, physics-guided deep learning approach to generate hourly air temperature data at 2 km resolution over the contiguous United States. The approach, called Amplifier Air-Transformer, first reconstructs GOES-16 surface temperature data obscured by clouds. It does so through a neural network encoded with the annual temperature cycle, incorporating a linear term to amplify ERA5 temperature values at finer scales and convolutional layers to capture spatiotemporal variations. Then, another neural network transforms the reconstructed surface temperature into air temperature by leveraging its latent relationship with key Earth surface properties. The approach is further enhanced with predictive uncertainty estimation through deep ensemble learning to improve reliability. The proposed approach is built and tested on 77.7 billion surface temperature pixels and 155 million air temperature records from weather stations across the contiguous United States (2018-2024), achieving hourly air temperature mapping accuracy of 1.93 C in station-based validation. The proposed approach streamlines surface temperature reconstruction and air temperature prediction, and it can be extended to other satellite sources for seamless air temperature monitoring at high spatiotemporal resolution. The generated data of this study can be downloaded at https://doi.org/10.5281/zenodo.15252812, and the project webpage can be found at https://skrisliu.com/HourlyAirTemp2kmUSA/.

With climate change-related extreme events on the rise, high dimensional Earth observation data presents a unique opportunity for forecasting and understanding impacts on ecosystems. This is, however, impeded by the complexity of processing, visualizing, modeling, and explaining this data. To showcase how this challenge can be met, here we train a convolutional long short-term memory-based architecture on the novel DeepExtremeCubes dataset. DeepExtremeCubes includes around 40,000 long-term Sentinel-2 minicubes (January 2016-October 2022) worldwide, along with labeled extreme events, meteorological data, vegetation land cover, and topography map, sampled from locations affected by extreme climate events and surrounding areas. When predicting future reflectances and vegetation impacts through kernel normalized difference vegetation index, the model achieved an R^2 score of 0.9055 in the test set. Explainable artificial intelligence was used to analyze the model's predictions during the October 2020 Central South America compound heatwave and drought event. We chose the same area exactly one year before the event as counterfactual, finding that the average temperature and surface pressure are generally the best predictors under normal conditions. In contrast, minimum anomalies of evaporation and surface latent heat flux take the lead during the event. A change of regime is also observed in the attributions before the event, which might help assess how long the event was brewing before happening. The code to replicate all experiments and figures in this paper is publicly available at https://github.com/DeepExtremes/txyXAI

The transition from the superconducting to the normal state in a magnetic field was considered as a irreversible thermodynamic process before 1933 because of Joule heating. But all physicists became to consider this transition as reversible after 1933 because of the obvious contradiction of the Meissner effect with the second law of thermodynamics if this transition is considered as a irreversible process. This radical change of the opinion contradicted logic since the dissipation of the kinetic energy of the surface screening current into Joule heat in the normal state cannot depend on how this current appeared in the superconducting state. The inconsistency of the conventional theory of superconductivity, created in the framework of the equilibrium thermodynamics, with Joule heating, on which Jorge Hirsch draws reader's attention, is a consequence of this history. In order to avoid contradiction with the second law of thermodynamics, physicists postulated in the thirties of the last century that the surface screening current is damped without the generation of Joule heat. This postulate contradicts not only logic and the conventional theory of superconductivity but also experimental results.

Climate change is expected to intensify and increase extreme events in the weather cycle. Since this has a significant impact on various sectors of our life, recent works are concerned with identifying and predicting such extreme events from Earth observations. With respect to wildfire danger forecasting, previous deep learning approaches duplicate static variables along the time dimension and neglect the intrinsic differences between static and dynamic variables. Furthermore, most existing multi-branch architectures lose the interconnections between the branches during the feature learning stage. To address these issues, this paper proposes a 2D/3D two-branch convolutional neural network (CNN) with a Location-aware Adaptive Normalization layer (LOAN). Using LOAN as a building block, we can modulate the dynamic features conditional on their geographical locations. Thus, our approach considers feature properties as a unified yet compound 2D/3D model. Besides, we propose using the sinusoidal-based encoding of the day of the year to provide the model with explicit temporal information about the target day within the year. Our experimental results show a better performance of our approach than other baselines on the challenging FireCube dataset. The results show that location-aware adaptive feature normalization is a promising technique to learn the relation between dynamic variables and their geographic locations, which is highly relevant for areas where remote sensing data builds the basis for analysis. The source code is available at https://github.com/HakamShams/LOAN.

Temperature sampling is a conventional approach to diversify large language model predictions. As temperature increases, the prediction becomes diverse but also vulnerable to hallucinations -- generating tokens that are sensible but not factual. One common approach to mitigate hallucinations is to provide source/grounding documents and the model is trained to produce predictions that bind to and are attributable to the provided source. It appears that there is a trade-off between diversity and attribution. To mitigate any such trade-off, we propose to relax the constraint of having a fixed temperature over decoding steps, and a mechanism to guide the dynamic temperature according to its relevance to the source through KL-divergence. Our experiments justifies the trade-off, and shows that our sampling algorithm outperforms the conventional top-k and top-p algorithms in conversational question-answering and summarization tasks.

We introduce CLIMATE-FEVER, a new publicly available dataset for verification of climate change-related claims. By providing a dataset for the research community, we aim to facilitate and encourage work on improving algorithms for retrieving evidential support for climate-specific claims, addressing the underlying language understanding challenges, and ultimately help alleviate the impact of misinformation on climate change. We adapt the methodology of FEVER [1], the largest dataset of artificially designed claims, to real-life claims collected from the Internet. While during this process, we could rely on the expertise of renowned climate scientists, it turned out to be no easy task. We discuss the surprising, subtle complexity of modeling real-world climate-related claims within the fever framework, which we believe provides a valuable challenge for general natural language understanding. We hope that our work will mark the beginning of a new exciting long-term joint effort by the climate science and AI community.

The realization that complex systems such as ecological communities can collapse or shift regimes suddenly and without rapid external forcing poses a serious challenge to our understanding and management of the natural world. The potential to identify early warning signals that would allow researchers and managers to predict such events before they happen has therefore been an invaluable discovery that offers a way forward in spite of such seemingly unpredictable behavior. Research into early warning signals has demonstrated that it is possible to define and detect such early warning signals in advance of a transition in certain contexts. Here we describe the pattern emerging as research continues to explore just how far we can generalize these results. A core of examples emerges that shares three properties: the phenomenon of rapid regime shifts, a pattern of 'critical slowing down' that can be used to detect the approaching shift, and a mechanism of bifurcation driving the sudden change. As research has expanded beyond these core examples, it is becoming clear that not all systems that show regime shifts exhibit critical slowing down, or vice versa. Even when systems exhibit critical slowing down, statistical detection is a challenge. We review the literature that explores these edge cases and highlight the need for (a) new early warning behaviors that can be used in cases where rapid shifts do not exhibit critical slowing down, (b) the development of methods to identify which behavior might be an appropriate signal when encountering a novel system; bearing in mind that a positive indication for some systems is a negative indication in others, and (c) statistical methods that can distinguish between signatures of early warning behaviors and noise.

The increasing frequency of extreme weather events due to global climate change urges accurate weather prediction. Recently, great advances have been made by the end-to-end methods, thanks to deep learning techniques, but they face limitations of representation inconsistency in multivariable integration and struggle to effectively capture the dependency between variables, which is required in complex weather systems. Treating different variables as distinct modalities and applying a two-stage training approach from multimodal models can partially alleviate this issue, but due to the inconformity in training tasks between the two stages, the results are often suboptimal. To address these challenges, we propose an implicit two-stage training method, configuring separate encoders and decoders for each variable. In detailed, in the first stage, the Translator is frozen while the Encoders and Decoders learn a shared latent space, in the second stage, the Encoders and Decoders are frozen, and the Translator captures inter-variable interactions for prediction. Besides, by introducing a self-attention mechanism for multivariable fusion in the latent space, the performance achieves further improvements. Empirically, extensive experiments show the state-of-the-art performance of our method. Specifically, it reduces the MSE for near-surface air temperature and relative humidity predictions by 28.82\% and 23.39\%, respectively. The source code is available at https://github.com/ShremG/Met2Net.

Here we summarize the physical properties of the newly discovered Fe-chalcogenide superconductors. The Fe-chalcogenide superconductors attract us as the simplest Fe-based superconductors. Furthermore, Fe chalcogenides show a huge pressure effect on their superconducting properties. The origin of the high transition temperature was discussed with both the change in crystal structure and magnetism. The progress on the thin-film and superconducting-wire fabrications are also described.

Cool (approx 10^4K), dense material permeates the hot (approx 10^6K), tenuous solar corona in form of coronal condensations, for example prominences and coronal rain. As the solar atmosphere evolves, turbulence can drive mixing between the condensations and the surrounding corona, with the mixing layer exhibiting an enhancement in emission from intermediate temperature (approx10^5K) spectral lines, which is often attributed to turbulent heating within the mixing layer. However, radiative cooling is highly efficient at intermediate temperatures and numerical simulations have shown that radiative cooling can far exceed turbulent heating in prominence-corona mixing scenarios. As such the mixing layer can have a net loss of thermal energy, i.e., the mixing layer is cooling rather than heating. Here, we investigate the observational signatures of cooling processes in Kelvin-Helmholtz mixing between a prominence thread and the surrounding solar corona through 2D numerical simulations. Optically thin emission is synthesised for Si IV, along with optically thick emission for Halpha, Ca II K and Mg II h using Lightweaver The Mg II h probes the turbulent mixing layer, whereas Halpha and Ca II K form within the thread and along its boundary respectively. As the mixing evolves, intermediate temperatures form leading to an increase in Si IV emission, which coincides with increased radiative losses. The simulation is dominated by cooling in the mixing layer, rather than turbulent heating, and yet enhanced emission in warm lines is produced. As such, an observational signature of decreased emission in cooler lines and increased emission in hotter lines may be a signature of mixing, rather than an implication of heating.

The temperature parameter plays a profound role during training and/or inference with large foundation models (LFMs) such as large language models (LLMs) and CLIP models. Particularly, it adjusts the logits in the softmax function in LLMs, which is crucial for next token generation, and it scales the similarities in the contrastive loss for training CLIP models. A significant question remains: Is it viable to learn a neural network to predict a personalized temperature of any input data for enhancing LFMs"? In this paper, we present a principled framework for learning a small yet generalizable temperature prediction network (TempNet) to improve LFMs. Our solution is composed of a novel learning framework with a robust loss underpinned by constrained distributionally robust optimization (DRO), and a properly designed TempNet with theoretical inspiration. TempNet can be trained together with a large foundation model from scratch or learned separately given a pretrained foundation model. It is not only useful for predicting personalized temperature to promote the training of LFMs but also generalizable and transferable to new tasks. Our experiments on LLMs and CLIP models demonstrate that TempNet greatly improves the performance of existing solutions or models, e.g. Table 1. The code to reproduce the experimental results in this paper can be found at https://github.com/zhqiu/TempNet.

We present results of the long-term multi-wavelength study of optical, UV and X-ray variability of the nearby changing-look (CL) Seyfert NGC 1566 observed with the Swift Observatory and the MASTER Global Robotic Network from 2007 to 2019. We started spectral observations with South African Astronomical Observatory 1.9-m telescope soon after the brightening was discovered in July 2018 and present here the data for the interval between Aug. 2018 to Sep. 2019. This paper concentrates on the remarkable post-maximum behaviour after July 2018 when all bands decreased with some fluctuations. We observed three significant re-brightenings in the post-maximum period during 17 Nov. 2018 - 10 Jan. 2019, 29 Apr. - 19 Jun. 2019 and 27 Jul.- 6 Aug. 2019. An X-ray flux minimum occurred in Mar. 2019. The UV minimum occurred about 3 months later. It was accompanied by a decrease of the Luv/Lx ratio. New post-maximum spectra covering (31 Nov. 2018 - 23 Sep. 2019) show dramatic changes compared to 2 Aug. 2018, with fading of the broad lines and [Fe X]6374 until Mar. 2019. These lines became somewhat brighter in Aug.-Sep. 2019. Effectively, two CL states were observed for this object: changing to type 1.2 and then returning to the low state as a type 1.8 Sy. We suggest that the changes are due mostly to fluctuations in the energy generation. The estimated Eddington ratios are about 0.055% for minimum in 2014 and 2.8% for maximum in 2018.

Heatwaves pose significant health risks, particularly due to prolonged exposure to high summer temperatures. Vulnerable groups, especially pedestrians and cyclists on sun-exposed sidewalks, motivate the development of a route planning method that incorporates somatosensory temperature effects through shade ratio consideration. This paper is the first to introduce a pipeline that utilizes segmentation foundation models to extract shaded areas from high-resolution satellite images. These areas are then integrated into a multi-layered road map, enabling users to customize routes based on a balance between distance and shade exposure, thereby enhancing comfort and health during outdoor activities. Specifically, we construct a graph-based representation of the road map, where links indicate connectivity and are updated with shade ratio data for dynamic route planning. This system is already implemented online, with a video demonstration, and will be specifically adapted to assist travelers during the 2024 Olympic Games in Paris.

Climate change has resulted in a year over year increase in adverse weather and weather conditions which contribute to increasingly severe fire seasons. Without effective mitigation, these fires pose a threat to life, property, ecology, cultural heritage, and critical infrastructure. To better prepare for and react to the increasing threat of wildfires, more accurate fire modelers and mitigation responses are necessary. In this paper, we introduce SimFire, a versatile wildland fire projection simulator designed to generate realistic wildfire scenarios, and SimHarness, a modular agent-based machine learning wrapper capable of automatically generating land management strategies within SimFire to reduce the overall damage to the area. Together, this publicly available system allows researchers and practitioners the ability to emulate and assess the effectiveness of firefighter interventions and formulate strategic plans that prioritize value preservation and resource allocation optimization. The repositories are available for download at https://github.com/mitrefireline.

Food choice is a complex phenomenon shaped by factors such as taste, ambience, culture or weather. In this paper, we explore food-related tweeting in different weather conditions. We inspect a Latvian food tweet dataset spanning the past decade in conjunction with a weather observation dataset consisting of average temperature, precipitation, and other phenomena. We find which weather conditions lead to specific food information sharing; automatically classify tweet sentiment and discuss how it changes depending on the weather. This research contributes to the growing area of large-scale social network data understanding of food consumers' choices and perceptions.

Knowledge Distillation (KD) trains a smaller student model using a large, pre-trained teacher model, with temperature as a key hyperparameter controlling the softness of output probabilities. Traditional methods use a fixed temperature throughout training, which is suboptimal. Moreover, architectural differences between teacher and student often result in mismatched logit magnitudes. We demonstrate that students benefit from softer probabilities early in training but require sharper probabilities in later stages. We introduce Dynamic Temperature Scheduler (DTS), which adjusts temperature dynamically based on the cross-entropy loss gap between teacher and student. To our knowledge, this is the first temperature scheduling method that adapts based on the divergence between teacher and student distributions. Our method integrates seamlessly with existing KD frameworks. We validate DTS across multiple KD strategies on vision (CIFAR-100, Tiny-ImageNet) and NLP tasks (GLUE, Dolly, SelfIns, UnNI, S-NI), consistently outperforming static-temperature baselines. Code is available at https://github.com/Sibgat-Ul/DTS.

Sri Lanka's fisheries sector is important for jobs and food supply. Between 2019 and 2025, it faced several major problems at the same time, and how these events together affected fish production and prices is still not well understood. This study develops a framework to connect weather changes, major disruption events, fish production, and prices, with the goal of helping policymakers, traders, and supply chain managers make better decisions. Seasonal patterns are studied using STL decomposition. Spearman lag correlation is used to find delayed effects of climate on production. Interrupted Time Series (ITS) regression measures the impact of major events. SARIMAX models predict monthly production and prices. Hotspot detection identifies unusual patterns. The results show that marine and inland fisheries behave differently in terms of seasons and climate effects. Major disruptions caused different levels of impact, and in some cases, one sector helped compensate for another. These findings can support better planning, for example, improving infrastructure in high-risk areas, strengthening cold storage systems, and using early warning alerts for unusual events. Price forecasting tools should be used as decision-support tools, not as direct market signals.

Recent work has highlighted the complex influence training hyperparameters, e.g., the number of training epochs, can have on the prunability of machine learning models. Perhaps surprisingly, a systematic approach to predict precisely how adjusting a specific hyperparameter will affect prunability remains elusive. To address this gap, we introduce a phenomenological model grounded in the statistical mechanics of learning. Our approach uses temperature-like and load-like parameters to model the impact of neural network (NN) training hyperparameters on pruning performance. A key empirical result we identify is a sharp transition phenomenon: depending on the value of a load-like parameter in the pruned model, increasing the value of a temperature-like parameter in the pre-pruned model may either enhance or impair subsequent pruning performance. Based on this transition, we build a three-regime model by taxonomizing the global structure of the pruned NN loss landscape. Our model reveals that the dichotomous effect of high temperature is associated with transitions between distinct types of global structures in the post-pruned model. Based on our results, we present three case-studies: 1) determining whether to increase or decrease a hyperparameter for improved pruning; 2) selecting the best model to prune from a family of models; and 3) tuning the hyperparameter of the Sharpness Aware Minimization method for better pruning performance.

Ocean scientists have been collecting visual data to study marine organisms for decades. These images and videos are extremely valuable both for basic science and environmental monitoring tasks. There are tools for automatically processing these data, but none that are capable of handling the extreme variability in sample populations, image quality, and habitat characteristics that are common in visual sampling of the ocean. Such distribution shifts can occur over very short physical distances and in narrow time windows. Creating models that are able to recognize when an image or video sequence contains a new organism, an unusual collection of animals, or is otherwise out-of-sample is critical to fully leverage visual data in the ocean. The FathomNet2023 competition dataset presents a realistic scenario where the set of animals in the target data differs from the training data. The challenge is both to identify the organisms in a target image and assess whether it is out-of-sample.

We present a new approach to forecasting North Pacific Sea Surface Temperatures (SST) by recognizing that interannual variability primarily reflects amplitude changes in four dominant seasonal cycles. Our multivariate linear model simultaneously captures these amplitude-modulated seasonal cycles along with the Pacific Decadal Oscillation (PDO), which naturally emerges as an intrinsic feature of the system rather than a separate phenomenon. Using sixteen-dimensional regression based on four spatially distributed time series per variable, the model delivers unprecedented forecast accuracy for both interannual amplitude modulations and PDO evolution, maintaining skill beyond 36 months -- a substantial improvement over current operational and research forecasts, including machine learning methods. Predictions initialized in 2024 project that the PDO will remain in its negative phase through late 2026, implying reduced likelihood of severe marine heatwaves in the eastern North Pacific during this period. These findings have direct implications for regional climate impacts, including storm tracks, precipitation patterns, and marine ecosystem health. By treating seasonal and interannual variability as coupled rather than independent processes, this framework advances our understanding of North Pacific climate dynamics and provides a powerful tool for stakeholders managing climate-sensitive resources and planning adaptation strategies in regions strongly influenced by North Pacific conditions.

Early warning signals have been proposed to forecast the possibility of a critical transition, such as the eutrophication of a lake, the collapse of a coral reef, or the end of a glacial period. Because such transitions often unfold on temporal and spatial scales that can be difficult to approach by experimental manipulation, research has often relied on historical observations as a source of natural experiments. Here we examine a critical difference between selecting systems for study based on the fact that we have observed a critical transition and those systems for which we wish to forecast the approach of a transition. This difference arises by conditionally selecting systems known to experience a transition of some sort and failing to account for the bias this introduces -- a statistical error often known as the Prosecutor's Fallacy. By analysing simulated systems that have experienced transitions purely by chance, we reveal an elevated rate of false positives in common warning signal statistics. We further demonstrate a model-based approach that is less subject to this bias than these more commonly used summary statistics. We note that experimental studies with replicates avoid this pitfall entirely.

This article describes location aware temperature profiles from six strawberry shipments across the continental United States. Three pallets were instrumented in each shipment with three vertically placed loggers to take a longitudinal and latitudinal snapshot of 9 strategically different locations (including the top, middle and bottom layers of the pallets placed in the back, middle and the front of the shipping container) for a combined 54 measurement points across shipments of varying lengths. The sensors were instrumented in the field, right at the point of harvest, recorded temperatures every every 5 to 10 minutes depending on the shipment, and uploaded their data periodically via cellular radios on each device. The data is a result of significant collaboration between stakeholders from farmers to distributors to retailers to academics, which can play an important role for researchers and educators in food engineering, cold-chain, machine learning, and data mining, as well as in other disciplines related to food and transportation.

Recent JWST observations with NIRCam and MIRI of the ultra-short-period super-Earth 55 Cancri e indicate a possible volatile atmosphere surrounding the planet. Previous analysis of the NIRCam spectra suggested potential absorption features from CO2 or CO and significant sub-weekly variability. The MIRI low-resolution spectrum does not contain substantial features but was found to be consistent with effective heat redistribution models. In this work, we computed a grid of over 25000 self-consistent 1D forward models incorporating H-N-O-C-S-P-Si-Ti equilibrium chemistry and assessed plausible atmospheric compositions based on the current JWST data. Despite exhaustive analysis, the composition and properties of the atmosphere remain elusive. While our results statistically favour a global, hydrogen-free, nitrogen-dominated atmosphere enriched in PO and CO2, various alternative compositions, including H2O-,CO-, PH3-, or Si-bearing remain viable explanations. Unconstrained heat redistribution efficiency and absolute NIRCam flux are among the largest sources of uncertainty in our analysis. We also find that the heat redistribution factor and surface pressure are highly degenerate with atmospheric composition, and that these parameters cannot be independently constrained using current JWST observations. Furthermore, we show that the observed variability may arise from dynamic interactions between the atmosphere and an underlying magma ocean, driving rapid shifts in atmospheric chemistry and thermal emission. Our results highlight the importance of using self-consistent forward models when analysing novel JWST spectra with limited signal-to-noise ratios -- such as those of 55 Cancri e -- as it allows for a more comprehensive evaluation of potential atmospheric scenarios while also being less sensitive to subtle spectral differences than retrievals...

Neutron stars provide unique laboratories for probing physics of dense nuclear matter under extreme conditions. Their thermal and luminosity evolution reflects key internal properties such as the equation of state (EoS), nucleon superfluidity and superconductivity, envelope composition, and magnetic field, and so on. Recent observations [e.g., V. Abramkin et al., ApJ 924, 128 (2022)] have revealed unexpectedly warm old neutron stars, which cannot be explained by standard neutrino-photon cooling models. The failure of the standard cooling models implies the presence of additional internal heating mechanism. Building on the previous study [M. Fujiwara et al., JCAP 03, 051 (2024)], which proposed vortex creep heating (VCH) from the frictional motion of superfluid vortices as a viable mechanism, we extend the cooling framework to include both VCH and direct Urca (DUrca) processes. These are implemented in our code to explore their combined impact, particularly for massive neutron stars where DUrca operates. By varying rotational parameters (P, P, P_0), EoS models (APR, BSk24), pairing gaps, and envelope compositions, we examine how heating-cooling interplay shapes the temperature evolution. Our results show that VCH can substantially mitigate the rapid cooling driven by DUrca, offering new evolutionary pathways for massive neutron stars.

In a two-band superconductor, two qualitatively different fluctuation modes related to the gap modules contribute to free energy and heat capacity, in addition to the phase fluctuations. The first mode has divergent temperature behaviour since it accounts for the critical fluctuations around the phase transition point, Tc, along with pseudo-critical ones associated with former instability of the weaker-superconductivity component. The involvement of these two factors, competing under interband interaction, results in the Ginzburg number which increases with Tc non-monotonically, allowing the reduction up to 75%. This makes fluctuations effective for revealing additional superconducting component in the system. The second mode does not diverge, but has a jump at Tc, defined uniquely by the strength of interband interaction. This mode contributes fundamentally beyond critical domain.