Daily Papers

Brittle materials subjected to thermal shocks experience strong temperature gradients that in turn give rise to mechanical stresses that can be large enough to induce fracture. This work presents a complete model for phase-field fracture for coupled thermo-mechanical problems, wherein the bulk material properties, the material strength, and the fracture toughness are specified independently. The capabilities of the model are assessed across a wide span of scenarios in thermo-mechanical fracture, from the propagation of large pre-existing cracks to crack nucleation under spatially uniform states of stress. In particular, we revisit the controlled quenching of glass plates, and demonstrate how the model captures experimentally observed crack patterns across a range of thermal loads. Ceramic disks subjected to infrared radiation are also examined, with the model reproducing both straight cracks in notched specimens and branching in intact specimens. Finally, ceramic pellets subjected to rapid power pulses are examined, with the model explaining experimental transitions from intact to fractured pellets and the important role of material strength. The results demonstrate that the complete phase-field model unifies the treatment of distinct fracture scenarios under thermal shock, surpassing classical approaches and enabling more reliable prediction of brittle fracture in extreme environments.

The Richtmyer-Meshkov instability (RMI) results from the impulsive acceleration of a density interface where either it or the acceleration is perturbed. Density interfaces may arise due to a change in gas species, isotope, temperature or a combination of these. We computationally investigate the effect of interface type on the plasma RMI, which is relevant for a range of applications, including inertial confinement fusion. We simulate the evolution of single-mode perturbed thermal, species and isotope interfaces in an ideal ion-electron plasma using the multi-fluid plasma (MFP) model. We find that in the MFP model, the evolution of different types of interface differ significantly, in contrast to single-fluid models where they behave similarly if the Atwood number is matched. The thermal and species interfaces produce the most severe response to shock acceleration, experiencing the secondary instabilities and enhanced primary mode growth. The isotope interface evolution is restrained in comparison to the former cases, resembling the response predicted by single-fluid models. The determining factor in the severity of the MFP RMI is the density ratio across the initial interface in the electron fluid, which is unity for an isotope interface. We observe that as the density ratio across the electron interface decreases, so do the magnitudes of the self-generated fields and consequently the severity of the growth amplification. Generally, the evolution of the RMI with different types of interface becomes more similar as the level of coupling between the ion and electron fluids is increased, characterised by reducing the plasma non-dimensional skin depth

We present a 70ks Chandra observation of the radio galaxy 3C293. This galaxy belongs to the class of molecular hydrogen emission galaxies (MOHEGs) that have very luminous emission from warm molecular hydrogen. In radio galaxies, the molecular gas appears to be heated by jet-driven shocks, but exactly how this mechanism works is still poorly understood. With Chandra, we observe X-ray emission from the jets within the host galaxy and along the 100 kpc radio jets. We model the X-ray spectra of the nucleus, the inner jets, and the X-ray features along the extended radio jets. Both the nucleus and the inner jets show evidence of 10^7 K shock-heated gas. The kinetic power of the jets is more than sufficient to heat the X-ray emitting gas within the host galaxy. The thermal X-ray and warm H2 luminosities of 3C293 are similar, indicating similar masses of X-ray hot gas and warm molecular gas. This is consistent with a picture where both derive from a multiphase, shocked interstellar medium (ISM). We find that radio-loud MOHEGs that are not brightest cluster galaxies (BCGs), like 3C293, typically have LH2/LX~1 and MH2/MX~1, whereas MOHEGs that are BCGs have LH2/LX~0.01 and MH2/MX~0.01. The more massive, virialized, hot atmosphere in BCGs overwhelms any direct X-ray emission from current jet-ISM interaction. On the other hand, LH2/LX~1 in the Spiderweb BCG at z=2, which resides in an unvirialized protocluster and hosts a powerful radio source. Over time, jet-ISM interaction may contribute to the establishment of a hot atmosphere in BCGs and other massive elliptical galaxies.

The intrabinary shocks (IBS) of spider pulsars emit non-thermal synchrotron X-rays from accelerated electrons and positrons in the shocked pulsar wind, likely energized by magnetic reconnection. In redback spider pulsars, the IBS typically wraps around the sub-stellar companion, leading to a near-normal IBS shock with relatively bright X-ray emission. The characteristic energies of radiating particles and the magnetic fields in the IBS suggest spectral features in the hard X-ray band. Here we perform joint soft-hard X-ray analyses of three redback pulsars, J1723-2837, J2215+5135, and J2339-0533, including new J2215 NuSTAR data. We identify a significant cooling break in J1723-2837 and a marginal break in J2215+5135, while placing constraints on the break energy in J2339-0533. Interpreting these as synchrotron cooling features allows us to estimate the IBS magnetic field B_{rm IBS} sim 40-100 G and place lower bounds on the maximum radiating electron energy. Our results constrain the magnetization of the pulsar wind as well as pair-production in millisecond pulsar magnetospheres.

Foundation models have revolutionized natural language processing through a ``train once, deploy anywhere'' paradigm, where a single pre-trained model adapts to countless downstream tasks without retraining. Access to a Physics Foundation Model (PFM) would be transformative -- democratizing access to high-fidelity simulations, accelerating scientific discovery, and eliminating the need for specialized solver development. Yet current physics-aware machine learning approaches remain fundamentally limited to single, narrow domains and require retraining for each new system. We present the General Physics Transformer (GPhyT), trained on 1.8 TB of diverse simulation data, that demonstrates foundation model capabilities are achievable for physics. Our key insight is that transformers can learn to infer governing dynamics from context, enabling a single model to simulate fluid-solid interactions, shock waves, thermal convection, and multi-phase dynamics without being told the underlying equations. GPhyT achieves three critical breakthroughs: (1) superior performance across multiple physics domains, outperforming specialized architectures by up to 29x, (2) zero-shot generalization to entirely unseen physical systems through in-context learning, and (3) stable long-term predictions through 50-timestep rollouts. By establishing that a single model can learn generalizable physical principles from data alone, this work opens the path toward a universal PFM that could transform computational science and engineering.

Heatwaves pose significant health risks, particularly due to prolonged exposure to high summer temperatures. Vulnerable groups, especially pedestrians and cyclists on sun-exposed sidewalks, motivate the development of a route planning method that incorporates somatosensory temperature effects through shade ratio consideration. This paper is the first to introduce a pipeline that utilizes segmentation foundation models to extract shaded areas from high-resolution satellite images. These areas are then integrated into a multi-layered road map, enabling users to customize routes based on a balance between distance and shade exposure, thereby enhancing comfort and health during outdoor activities. Specifically, we construct a graph-based representation of the road map, where links indicate connectivity and are updated with shade ratio data for dynamic route planning. This system is already implemented online, with a video demonstration, and will be specifically adapted to assist travelers during the 2024 Olympic Games in Paris.

Climate change is increasing the intensity and frequency of many extreme weather events, including heatwaves, which results in increased thermal discomfort and mortality rates. While global mitigation action is undoubtedly necessary, so is climate adaptation, e.g., through climate-sensitive urban planning. Among the most promising strategies is harnessing the benefits of urban trees in shading and cooling pedestrian-level environments. Our work investigates the challenge of optimal placement of such trees. Physical simulations can estimate the radiative and thermal impact of trees on human thermal comfort but induce high computational costs. This rules out optimization of tree placements over large areas and considering effects over longer time scales. Hence, we employ neural networks to simulate the point-wise mean radiant temperatures--a driving factor of outdoor human thermal comfort--across various time scales, spanning from daily variations to extended time scales of heatwave events and even decades. To optimize tree placements, we harness the innate local effect of trees within the iterated local search framework with tailored adaptations. We show the efficacy of our approach across a wide spectrum of study areas and time scales. We believe that our approach is a step towards empowering decision-makers, urban designers and planners to proactively and effectively assess the potential of urban trees to mitigate heat stress.

Accurate aerodynamic modeling of satellites in very low Earth orbit (VLEO) requires gas-surface interaction (GSI) models that capture the full velocity spectrum from thermal to orbital speeds. Atmospheric particles initially strike spacecraft surfaces at hypersonic velocities of 6 000 - 10 000 m/s. Due to surface roughness and complex geometries, especially within air-breathing electric propulsion (ABEP) intake systems, multiple collisions occur, progressively reducing the particle velocities. A recent machine learning framework for deriving scattering kernels from molecular dynamics (MD) simulations has shown promise, but remains limited to high-velocity single impacts and possibly violates fundamental equilibrium principles such as detailed balance. This work extends this machine learning based scattering kernel to cover the complete velocity range using conditional normalizing flows trained with physics-informed constraints, enabling accurate modeling of multi-bounce scenarios in realistic VLEO applications. We train a conditional Real-valued Non-Volume Preserving (cRealNVP) model on expanded molecular dynamics simulations covering velocities from thermal to hypersonic speeds, incorporating a detailed balance loss term. The resulting model demonstrates improved accuracy compared to previous approaches even in the original high-velocity regime, while successfully capturing thermal-velocity scattering. Quantitative assessment shows that thermalization is approximated within acceptable tolerances. This framework provides essential capabilities for accurate ABEP intake optimization and VLEO mission planning while offering a general methodology applicable to broader rarefied gas dynamics problems requiring thermodynamic consistency.

Understanding how households consume electricity in response to socioeconomic and climatic drivers is important for decision-makers designing energy policies in a changing climate and under geopolitical tensions. Consumers respond differently to thermal stress depending on income, consumption habits and the surrounding built environment, a nonlinear behaviour that most approaches oversimplify. In this study, households are treated as agents interacting with complex environments, and Inverse Reinforcement Learning is used to represent their consumption behaviour as model implied reward functions. Specifically, we observe how these reward functions change when households undergo socioeconomic and climatic shocks. The framework is tested on different clusters of electricity consumption profiles in Italy. Clusters' reward functions are retrieved and used to understand how cooling behaviour changes from summer 2021 to summer 2022 and 2023, before, during and after the energy crisis and a heatwave. We find that these shocks reshaped cooling behaviour heterogeneously across consumer groups, in directions conditioned by their prior habits and built environment. Across the 2021 to 2023 summers, we identify a spectrum of responses: transient adjustments that receded as the shocks eased, durable shifts persisting into 2023, and consumers exhibiting negligible change. At the intradaily scale, groups comparable in socioeconomic and environmental context but differing in their daily timing of consumption responded distinctly, identifying time of use as a separate dimension of behavioural heterogeneity. Energy policies and demand-response schemes should therefore account not only for who consumers are and where they live, but for when they consume and whether their response to a shock persists.

Thermal cameras can watch over older people living alone without capturing faces, and multimodal large language models (LLMs) can judge a short video without task-specific training. We evaluate a production multimodal LLM, Gemini 3.8 Flash at temperature 0, as the decision stage of an event-triggered fall screener, used exactly as a deployed prototype uses it: one request per short thermal clip, with its sound track when there is one, and its predecessor Gemini 3.7 Flash on the same requests. On 438 staged falls and 563 non-fall windows that we located by hand in a public 32x24 thermal dataset, the deployed request called 69% of the held-out subjects' falls (67% over all subjects; bed falls excluded) and none of 499 non-fall windows, including people lying on the floor and getting up. Over 76 h of ordinary life in an occupied room, recorded at 160x120 with sound, it called none of 395 clips a fall (95% upper bound 1.2 false alarms per day) and caught 4 of the 9 staged falls the camera could see. One cautionary sentence in the prompt ("a person who goes out of view ... is not a fall") accounted for many of the misses: removing it raised sensitivity on the held-out subjects from 69% to 83% on 3.8 Flash and from 80% to 92% on Gemini 3.7 Flash, and in the home from 4 to 9 of the 9 visible falls, with no false call in ordinary living but at the price of calling deliberate lie-downs a fall. Sensitivity collapsed at 8x6 pixels (34%); identical requests disagreed on 4% of windows; and when the model called a fall, its explanation placed it within a second of the annotated landing 99% of the time. Two conventional detectors trained on the laboratory data caught nearly every held-out laboratory fall but raised 14.2 and 23.9 false alarms per day in the home. We release the frame-level fall annotations of the public dataset and every model answer on it.

Thermonuclear flame fronts in Type Ia supernovae develop hydrodynamic instabilities that generate turbulent mesoscale flow and substantial local thermodynamic variability. Recent work by Brooker+25 demonstrated systematic shortening of fuel ignition times near Rayleigh--Taylor unstable deflagration fronts, but the physical origin remained unclear. We investigate the thermodynamic evolution of fuel near the flame front using multidimensional simulations and Lagrangian tracer-particle analysis, focusing on flame-driven expansion and ignition-time variability in partially degenerate carbon--oxygen plasma. Tracer trajectories show that the most strongly preconditioned fuel parcels near the flame front, which form a minority of the fuel layer, undergo approximately pressure-constrained expansion with modest density reductions and temperature increases of approx 2times10^{8}~K to approx7times10^{8}~K (approx13 to 63 per cent above the unperturbed fuel temperature) between the low- and high-density models. Despite moderate thermodynamic perturbations, the strong temperature sensitivity of carbon ignition produces substantial shortening of ignition times. The results indicate a two-step mechanism: flame thermal expansion perturbs the fuel away from hydrostatic equilibrium, while restoration of pressure balance by weak acoustic waves redistributes internal energy from degenerate to thermal components. This raises the fuel temperature and produces localized thermodynamic preconditioning. These results suggest that unsteady thermonuclear flames can shorten ignition times ahead of the flame, influencing fuel over distances larger than the laminar flame thickness. Whether this preconditioning leads to secondary ignition or contributes to deflagration-to-detonation transition remains untested here, as nuclear burning is disabled in the analyzed fuel.

Inferring past human motion from RGB images is challenging due to the inherent uncertainty of the prediction problem. Thermal images, on the other hand, encode traces of past human-object interactions left in the environment via thermal radiation measurement. Based on this observation, we collect the first RGB-Thermal dataset for human motion analysis, dubbed Thermal-IM. Then we develop a three-stage neural network model for accurate past human pose estimation. Comprehensive experiments show that thermal cues significantly reduce the ambiguities of this task, and the proposed model achieves remarkable performance. The dataset is available at https://github.com/ZitianTang/Thermal-IM.

Neutron stars provide unique laboratories for probing physics of dense nuclear matter under extreme conditions. Their thermal and luminosity evolution reflects key internal properties such as the equation of state (EoS), nucleon superfluidity and superconductivity, envelope composition, and magnetic field, and so on. Recent observations [e.g., V. Abramkin et al., ApJ 924, 128 (2022)] have revealed unexpectedly warm old neutron stars, which cannot be explained by standard neutrino-photon cooling models. The failure of the standard cooling models implies the presence of additional internal heating mechanism. Building on the previous study [M. Fujiwara et al., JCAP 03, 051 (2024)], which proposed vortex creep heating (VCH) from the frictional motion of superfluid vortices as a viable mechanism, we extend the cooling framework to include both VCH and direct Urca (DUrca) processes. These are implemented in our code to explore their combined impact, particularly for massive neutron stars where DUrca operates. By varying rotational parameters (P, P, P_0), EoS models (APR, BSk24), pairing gaps, and envelope compositions, we examine how heating-cooling interplay shapes the temperature evolution. Our results show that VCH can substantially mitigate the rapid cooling driven by DUrca, offering new evolutionary pathways for massive neutron stars.

Paired RGB-thermal data is crucial for visual-thermal sensor fusion and cross-modality tasks, including important applications such as multi-modal image alignment and retrieval. However, the scarcity of synchronized and calibrated RGB-thermal image pairs presents a major obstacle to progress in these areas. To overcome this challenge, RGB-to-Thermal (RGB-T) image translation has emerged as a promising solution, enabling the synthesis of thermal images from abundant RGB datasets for training purposes. In this study, we propose ThermalGen, an adaptive flow-based generative model for RGB-T image translation, incorporating an RGB image conditioning architecture and a style-disentangled mechanism. To support large-scale training, we curated eight public satellite-aerial, aerial, and ground RGB-T paired datasets, and introduced three new large-scale satellite-aerial RGB-T datasets--DJI-day, Bosonplus-day, and Bosonplus-night--captured across diverse times, sensor types, and geographic regions. Extensive evaluations across multiple RGB-T benchmarks demonstrate that ThermalGen achieves comparable or superior translation performance compared to existing GAN-based and diffusion-based methods. To our knowledge, ThermalGen is the first RGB-T image translation model capable of synthesizing thermal images that reflect significant variations in viewpoints, sensor characteristics, and environmental conditions. Project page: http://xjh19971.github.io/ThermalGen