new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

May 28

It's Not the Capability: Harness Sensitivity Is Non-Monotone Across LLM Agent Tiers

A prevalent assumption in LLM agent deployment holds that more structured harnesses universally improve reliability, and that higher-capability models need proportionally less structural guidance -- together implying a monotone inverse relationship between model capability tier and optimal harness complexity. We test this hypothesis through a controlled 432-run experiment crossing six models across four capability tiers with three harness conditions (light, balanced, strict) on HEAT-24, a 24-task synthetic benchmark with git-based workspace verification. Our results refute the monotone inverse relationship on two fronts. First, for the frontier chat model evaluated (Gemini 2.5 Flash), increased harness verbosity lowers VTSR by 29-38 percentage points -- a harness-complexity paradox. Second, for the frontier reasoning model evaluated (Qwen3.5-122B, extended thinking enabled), strict harness achieves the highest VTSR (91.7%) and the lowest latency, the opposite of the prediction. Within the constrained tier, a 2B model (Gemma4:e2B) matches strong-open-tier stability at 91.7% across all harnesses. Because each tier is represented by a single model in this study, these results should be interpreted as model-specific observations; harness sensitivity appears non-monotone across the models evaluated, and depends critically on model type (chat vs. reasoning). We introduce a six-label failure taxonomy showing that format_violation dominates capable-model failures while wrong_file dominates low-capability failures, and we derive practical tier-aware harness selection guidelines.

  • 1 authors
·
May 25

Towards Direct Evaluation of Harness Optimizers via Priority Ranking

Harness optimization enables automated agent creation by having an optimizer agent iteratively update the harness of target agents. Despite its success, current studies evaluate optimizers solely by observing target agents' performance gains. This indirect end-improvement evaluation neglects optimizers' actions at intermediate steps, which are often erroneous and hinder agent performance. Therefore, it is unclear whether harness optimization is driven by optimizers' informed update actions or simply trial-and-error. This necessitates direct evaluation of harness optimizers. However, evaluating harness optimizers directly is non-trivial and costly due to the lack of oracle harnesses. To address this, we present a simple, low-cost design to directly evaluate them, namely priority ranking. By asking harness optimizers to rank components (e.g., tools) in a given harness by their potential to improve/hinder agent performance when updated, our design quantifies optimizer ability at the step level without expensive rollouts or manual examination. More importantly, optimizers' ranking performance correlates with their ability to improve agents in actual multi-step harness optimization, establishing priority ranking as a reliable predictor of optimization ability. Priority ranking is enabled by Shor, a collection of 182 human-verified optimization scenarios spanning across domains, designs, and time stages. Codes and data can be found at https://github.com/k59118/Harness_Optimizer_Evaluation.

  • 12 authors
·
May 20

The Last Harness You'll Ever Build

AI agents are increasingly deployed on complex, domain-specific workflows -- navigating enterprise web applications that require dozens of clicks and form fills, orchestrating multi-step research pipelines that span search, extraction, and synthesis, automating code review across unfamiliar repositories, and handling customer escalations that demand nuanced domain knowledge. Each new task domain requires painstaking, expert-driven harness engineering: designing the prompts, tools, orchestration logic, and evaluation criteria that make a foundation model effective. We present a two-level framework that automates this process. At the first level, the Harness Evolution Loop optimizes a worker agent's harness H for a single task: a Worker Agent W_{H} executes the task, an Evaluator Agent V adversarially diagnoses failures and scores performance, and an Evolution Agent E modifies the harness based on the full history of prior attempts. At the second level, the Meta-Evolution Loop optimizes the evolution protocol Λ= (W_{H}, H^{(0)}, V, E) itself across diverse tasks, learning a protocol Λ^{(text{best)} that enables rapid harness convergence on any new task -- so that adapting an agent to a novel domain requires no human harness engineering at all.} We formalize the correspondence to meta-learning and present both algorithms. The framework shifts manual harness engineering into automated harness engineering, and takes one step further -- automating the design of the automation itself.

  • 3 authors
·
Apr 21 2

ProofAgent Harness: Open Infrastructure for Adversarial Evaluation of AI Agents

AI agents are entering high-risk production settings, where they use tools, retain context, follow policies, handle private data, and interact with users over multiple turns. Yet many evaluation methods still judge isolated outputs or static tasks, missing failures that emerge through trajectory, pressure, and adversarial interaction. We introduce ProofAgent Harness, open infrastructure for scalable, auditable, and adversarial AI agent evaluation. The harness provides evaluation infrastructure around an agent: it curates evaluation intelligence, runs adversarial multi-turn trials, captures behavioral traces, applies post-hoc multi-juror scoring, resolves disagreement, and produces evidence-linked reports. Its open design allows developers and researchers to extend domains, traps, metrics, juror personas, scoring rules, and reporting formats. At its core is Adversarial Multi-Juror Scoring with Turn-Level Audit, which evaluates completed agent behavior under pressure using calibrated juror personas, consensus checks, and turn-level evidence. Experiments across customer support, medical triage, privacy and security, and code generation agents show that strong agents fail selectively through weak metrics, fragile turns, unsafe reframing, and manipulation paths. We also find that a small quantized local Harness LLM can challenge production agents powered by best-in-class large LLMs, suggesting that evaluation capability emerges from the full harness pipeline rather than model scale alone. ProofAgent Harness turns AI agent evaluation from a static score into scalable adversarial evaluation infrastructure: repeatable, evidence-backed, extensible, and actionable before deployment.

  • 1 authors
·
May 21

Agentic Harness Engineering: Observability-Driven Automatic Evolution of Coding-Agent Harnesses

Harnesses are now central to coding-agent performance, mediating how models interact with tools and execution environments. Yet harness engineering remains a manual craft, because automating it faces a heterogeneous action space across editable components, voluminous trajectories that bury actionable signal, and edits whose effect is hard to attribute. We introduce Agentic Harness Engineering (AHE), a closed loop that addresses these challenges through three matched observability pillars: (1) component observability gives every editable harness component a file-level representation so the action space is explicit and revertible; (2) experience observability distills millions of raw trajectory tokens into a layered, drill-down evidence corpus that an evolving agent can actually consume; and (3) decision observability pairs every edit with a self-declared prediction, later verified against the next round's task-level outcomes. Together, these pillars turn every edit into a falsifiable contract, so harness evolution proceeds autonomously without collapsing into trial-and-error. Empirically, ten AHE iterations lift pass@1 on Terminal-Bench 2 from 69.7% to 77.0%, surpassing the human-designed harness Codex-CLI (71.9%) and the self-evolving baselines ACE and TF-GRPO. The frozen harness transfers without re-evolution: on SWE-bench-verified it tops aggregate success at 12% fewer tokens than the seed, and on Terminal-Bench 2 it yields +5.1 to +10.1pp cross-family gains across three alternate model families, indicating the evolved components encode general engineering experience rather than benchmark-specific tuning. Ablations localize the gain to tools, middleware, and long-term memory rather than the system prompt, suggesting factual harness structure transfers while prose-level strategy does not.

  • 9 authors
·
Apr 29

Harder Tasks Need More Experts: Dynamic Routing in MoE Models

In this paper, we introduce a novel dynamic expert selection framework for Mixture of Experts (MoE) models, aiming to enhance computational efficiency and model performance by adjusting the number of activated experts based on input difficulty. Unlike traditional MoE approaches that rely on fixed Top-K routing, which activates a predetermined number of experts regardless of the input's complexity, our method dynamically selects experts based on the confidence level in expert selection for each input. This allows for a more efficient utilization of computational resources, activating more experts for complex tasks requiring advanced reasoning and fewer for simpler tasks. Through extensive evaluations, our dynamic routing method demonstrates substantial improvements over conventional Top-2 routing across various benchmarks, achieving an average improvement of 0.7% with less than 90% activated parameters. Further analysis shows our model dispatches more experts to tasks requiring complex reasoning skills, like BBH, confirming its ability to dynamically allocate computational resources in alignment with the input's complexity. Our findings also highlight a variation in the number of experts needed across different layers of the transformer model, offering insights into the potential for designing heterogeneous MoE frameworks. The code and models are available at https://github.com/ZhenweiAn/Dynamic_MoE.

  • 11 authors
·
Mar 12, 2024

ClawEnvKit: Automatic Environment Generation for Claw-Like Agents

Constructing environments for training and evaluating claw-like agents remains a manual, human-intensive process that does not scale. We argue that what is needed is not just a dataset, but an automated pipeline capable of generating diverse, verified environments on demand. To this end, we introduce ClawEnvKit, an autonomous generation pipeline that instantiates this formalism from natural language descriptions. The pipeline comprises three modules: (1) a parser that extracts structured generation parameters from natural language input; (2) a generator that produces the task specification, tool interface, and scoring configuration; and (3) a validator that enforces feasibility, diversity, structural validity, and internal consistency across the generated environments. Using ClawEnvKit, we construct Auto-ClawEval, the first large-scale benchmark for claw-like agents, comprising 1,040 environments across 24 categories. Empirically, Auto-ClawEval matches or exceeds human-curated environments on coherence and clarity at 13,800x lower cost. Evaluated across 4 model families and 8 agent harness frameworks, we find that harness engineering boosts performance by up to 15.7 percentage points over a bare ReAct baseline, completion remains the primary axis of variation with no model saturating the benchmark, and automated generation enables evaluation at a scale previously infeasible. Beyond static benchmarking, ClawEnvKit enables live evaluation: users describe a desired capability in natural language and obtain a verified environment on demand, turning evaluation into a continuous, user-driven process. The same mechanism serves as an on-demand training environment generator, producing task distributions that adapt to an agent's current weaknesses rather than being bounded by existing user logs.

umd-zhou-lab Tianyi Lab
·
Apr 19 2

Chain-of-Experts: Unlocking the Communication Power of Mixture-of-Experts Models

We propose Chain-of-Experts (CoE), a new Mixture-of-Experts (MoE) architecture that introduces sequential expert communication within each layer. Unlike traditional MoE models, where experts operate independently in parallel, CoE processes tokens iteratively across a chain of experts inside a layer. To support dynamic expert selection across iterations, CoE employs a dedicated router at each iteration step within a layer. This design allows tokens to re-evaluate and select different experts during each iteration, rather than being statically assigned. As a result, CoE introduces a flexible routing mechanism that increases the diversity of expert combinations and enriches the model's representational capacity. CoE demonstrates improved performance under fixed compute: on math reasoning tasks, it reduces validation loss from 1.20 to 1.12 compared to a standard MoE. Beyond performance, CoE offers a new scaling axis: depth through expert iteration, which complements conventional width/depth scaling. For example, using 2x iterations matches the performance of 3x expert selections (in width), while reducing memory usage by 17.6-42% relative to other scaling strategies. Our analysis reveals that CoE's benefits stem from its iterative residual structure and enhanced expert specialization empowered by iterative routing, which together unlock more expressive representations. Code is available at https://github.com/ZihanWang314/coe.

  • 10 authors
·
Jun 22, 2025 1

Hierarchical Dataset Selection for High-Quality Data Sharing

The success of modern machine learning hinges on access to high-quality training data. In many real-world scenarios, such as acquiring data from public repositories or sharing across institutions, data is naturally organized into discrete datasets that vary in relevance, quality, and utility. Selecting which repositories or institutions to search for useful datasets, and which datasets to incorporate into model training are therefore critical decisions, yet most existing methods select individual samples and treat all data as equally relevant, ignoring differences between datasets and their sources. In this work, we formalize the task of dataset selection: selecting entire datasets from a large, heterogeneous pool to improve downstream performance under resource constraints. We propose Dataset Selection via Hierarchies (DaSH), a dataset selection method that models utility at both dataset and group (e.g., collections, institutions) levels, enabling efficient generalization from limited observations. Across two public benchmarks (Digit-Five and DomainNet), DaSH outperforms state-of-the-art data selection baselines by up to 26.2% in accuracy, while requiring significantly fewer exploration steps. Ablations show DaSH is robust to low-resource settings and lack of relevant datasets, making it suitable for scalable and adaptive dataset selection in practical multi-source learning workflows.

Data Science and Technology Towards AGI Part I: Tiered Data Management

The development of artificial intelligence can be viewed as an evolution of data-driven learning paradigms, with successive shifts in data organization and utilization continuously driving advances in model capability. Current LLM research is dominated by a paradigm that relies heavily on unidirectional scaling of data size, increasingly encountering bottlenecks in data availability, acquisition cost, and training efficiency. In this work, we argue that the development of AGI is entering a new phase of data-model co-evolution, in which models actively guide data management while high-quality data, in turn, amplifies model capabilities. To implement this vision, we propose a tiered data management framework, designed to support the full LLM training lifecycle across heterogeneous learning objectives and cost constraints. Specifically, we introduce an L0-L4 tiered data management framework, ranging from raw uncurated resources to organized and verifiable knowledge. Importantly, LLMs are fully used in data management processes, such as quality scoring and content editing, to refine data across tiers. Each tier is characterized by distinct data properties, management strategies, and training roles, enabling data to be strategically allocated across LLM training stages, including pre-training, mid-training, and alignment. The framework balances data quality, acquisition cost, and marginal training benefit, providing a systematic approach to scalable and sustainable data management. We validate the effectiveness of the proposed framework through empirical studies, in which tiered datasets are constructed from raw corpora and used across multiple training phases. Experimental results demonstrate that tier-aware data utilization significantly improves training efficiency and model performance. To facilitate further research, we release our tiered datasets and processing tools to the community.

openbmb OpenBMB
·
Feb 9 3

Auditing Agent Harness Safety

LLM agents increasingly run inside execution harnesses that dispatch tools, allocate resources, and route messages between specialized components. However, a harness can return a correct, benign answer over a trajectory that accesses unauthorized resources or leaks context to the wrong agent. Output-level evaluation cannot see these failures, yet most safety benchmarks score only final outputs or terminal states, even though many violations occur mid-trajectory rather than at termination. The central question is whether the harness respects user intent, permission boundaries, and information-flow constraints throughout execution. To address this gap, we propose HarnessAudit, a framework that audits full execution trajectories across boundary compliance, execution fidelity, and system stability, with a focus on multi-agent harnesses where these risks are most pronounced. We further introduce HarnessAudit-Bench, a benchmark of 210 tasks across eight real-world domains, instantiated in both single-agent and multi-agent configurations with embedded safety constraints. Evaluating ten harness configurations across frontier models and three multi-agent frameworks, we find that: (i) task completion is misaligned with safe execution, and violations accumulate with trajectory length; (ii) safety risks vary across domains, task types, and agent roles; (iii) most violations concentrate in resource access and inter-agent information transfer; and (iv) multi-agent collaboration expands the safety risk surface, while harness design sets the upper bound of safe deployment.

Mediocrity is the key for LLM as a Judge Anchor Selection

The ``LLM-as-a-judge'' paradigm has become a standard method for evaluating open-ended generation. To address the quadratic scalability costs of pairwise comparisons, popular benchmarks like Arena-Hard and AlpacaEval compare all models against a single anchor. However, despite its widespread use, the impact of anchor selection on the reliability of the results remains largely unexplored. In this work, we systematically investigate the effect of anchor selection by evaluating 22 different anchors on the Arena-Hard-v2.0 dataset. We find that the choice of anchor is critical: a poor anchor can dramatically reduce correlation with human rankings. We identify that common anchor choices (best-performing and worst-performing models) make poor anchors. Because these extreme anchors are consistently better or worse than all other models, they are seldom indicative of the relative ranking of the models. We further quantify the effect size of anchor selection, showing it is comparable to the selection of a judge model. We conclude with actionable recommendations. First, we conduct a power analysis, and compute sufficient benchmark sizes for anchor-based evaluation, finding that standard benchmark sizes are insufficient for pairwise evaluation and fail to distinguish between competitive models reliably. Second, we provide guidelines for selecting informative anchors to ensure reliable and efficient evaluation practices.

  • 4 authors
·
Mar 17

FAROS: Fair Graph Generation via Attribute Switching Mechanisms

Recent advancements in graph diffusion models (GDMs) have enabled the synthesis of realistic network structures, yet ensuring fairness in the generated data remains a critical challenge. Existing solutions attempt to mitigate bias by re-training the GDMs with ad-hoc fairness constraints. Conversely, with this work, we propose FAROS, a novel FAir graph geneRatiOn framework leveraging attribute Switching mechanisms and directly running in the generation process of the pre-trained GDM. Technically, our approach works by altering nodes' sensitive attributes during the generation. To this end, FAROS calculates the optimal fraction of switching nodes, and selects the diffusion step to perform the switch by setting tailored multi-criteria constraints to preserve the node-topology profile from the original distribution (a proxy for accuracy) while ensuring the edge independence on the sensitive attributes for the generated graph (a proxy for fairness). Our experiments on benchmark datasets for link prediction demonstrate that the proposed approach effectively reduces fairness discrepancies while maintaining comparable (or even higher) accuracy performance to other similar baselines. Noteworthy, FAROS is also able to strike a better accuracy-fairness trade-off than other competitors in some of the tested settings under the Pareto optimality concept, demonstrating the effectiveness of the imposed multi-criteria constraints.

  • 5 authors
·
Jul 4, 2025 1

Code as Agent Harness

Recent large language models (LLMs) have demonstrated strong capabilities in understanding and generating code, from competitive programming to repository-level software engineering. In emerging agentic systems, code is no longer only a target output. It increasingly serves as an operational substrate for agent reasoning, acting, environment modeling, and execution-based verification. We frame this shift through the lens of agent harnesses and introduce code as agent harness: a unified view that centers code as the basis for agent infrastructure. To systematically study this perspective, we organize the survey around three connected layers. First, we study the harness interface, where code connects agents to reasoning, action, and environment modeling. Second, we examine harness mechanisms: planning, memory, and tool use for long-horizon execution, together with feedback-driven control and optimization that make harness reliable and adaptive. Third, we discuss scaling the harness from single-agent systems to multi-agent settings, where shared code artifacts support multi-agent coordination, review, and verification. Across these layers, we summarize representative methods and practical applications of code as agent harness, spanning coding assistants, GUI/OS automation, embodied agents, scientific discovery, personalization and recommendation, DevOps, and enterprise workflows. We further outline open challenges for harness engineering, including evaluation beyond final task success, verification under incomplete feedback, regression-free harness improvement, consistent shared state across multiple agents, human oversight for safety-critical actions, and extensions to multimodal environments. By centering code as the harness of agentic AI, this survey provides a unified roadmap toward executable, verifiable, and stateful AI agent systems.

  • 42 authors
·
May 17 3

Performance Scaling via Optimal Transport: Enabling Data Selection from Partially Revealed Sources

Traditionally, data selection has been studied in settings where all samples from prospective sources are fully revealed to a machine learning developer. However, in practical data exchange scenarios, data providers often reveal only a limited subset of samples before an acquisition decision is made. Recently, there have been efforts to fit scaling laws that predict model performance at any size and data source composition using the limited available samples. However, these scaling functions are black-box, computationally expensive to fit, highly susceptible to overfitting, or/and difficult to optimize for data selection. This paper proposes a framework called <projektor>, which predicts model performance and supports data selection decisions based on partial samples of prospective data sources. Our approach distinguishes itself from existing work by introducing a novel *two-stage* performance inference process. In the first stage, we leverage the Optimal Transport distance to predict the model's performance for any data mixture ratio within the range of disclosed data sizes. In the second stage, we extrapolate the performance to larger undisclosed data sizes based on a novel parameter-free mapping technique inspired by neural scaling laws. We further derive an efficient gradient-based method to select data sources based on the projected model performance. Evaluation over a diverse range of applications demonstrates that <projektor> significantly improves existing performance scaling approaches in terms of both the accuracy of performance inference and the computation costs associated with constructing the performance predictor. Also, <projektor> outperforms by a wide margin in data selection effectiveness compared to a range of other off-the-shelf solutions.

  • 4 authors
·
Jul 5, 2023

Uncertainty-Aware Subset Selection for Robust Visual Explainability under Distribution Shifts

Subset selection-based methods are widely used to explain deep vision models: they attribute predictions by highlighting the most influential image regions and support object-level explanations. While these methods perform well in in-distribution (ID) settings, their behavior under out-of-distribution (OOD) conditions remains poorly understood. Through extensive experiments across multiple ID-OOD sets, we find that reliability of the existing subset based methods degrades markedly, yielding redundant, unstable, and uncertainty-sensitive explanations. To address these shortcomings, we introduce a framework that combines submodular subset selection with layer-wise, gradient-based uncertainty estimation to improve robustness and fidelity without requiring additional training or auxiliary models. Our approach estimates uncertainty via adaptive weight perturbations and uses these estimates to guide submodular optimization, ensuring diverse and informative subset selection. Empirical evaluations show that, beyond mitigating the weaknesses of existing methods under OOD scenarios, our framework also yields improvements in ID settings. These findings highlight limitations of current subset-based approaches and demonstrate how uncertainty-driven optimization can enhance attribution and object-level interpretability, paving the way for more transparent and trustworthy AI in real-world vision applications.

  • 3 authors
·
Dec 9, 2025

Stitchable Neural Networks

The public model zoo containing enormous powerful pretrained model families (e.g., ResNet/DeiT) has reached an unprecedented scope than ever, which significantly contributes to the success of deep learning. As each model family consists of pretrained models with diverse scales (e.g., DeiT-Ti/S/B), it naturally arises a fundamental question of how to efficiently assemble these readily available models in a family for dynamic accuracy-efficiency trade-offs at runtime. To this end, we present Stitchable Neural Networks (SN-Net), a novel scalable and efficient framework for model deployment. It cheaply produces numerous networks with different complexity and performance trade-offs given a family of pretrained neural networks, which we call anchors. Specifically, SN-Net splits the anchors across the blocks/layers and then stitches them together with simple stitching layers to map the activations from one anchor to another. With only a few epochs of training, SN-Net effectively interpolates between the performance of anchors with varying scales. At runtime, SN-Net can instantly adapt to dynamic resource constraints by switching the stitching positions. Extensive experiments on ImageNet classification demonstrate that SN-Net can obtain on-par or even better performance than many individually trained networks while supporting diverse deployment scenarios. For example, by stitching Swin Transformers, we challenge hundreds of models in Timm model zoo with a single network. We believe this new elastic model framework can serve as a strong baseline for further research in wider communities.

  • 3 authors
·
Feb 13, 2023

TADS: Task-Aware Data Selection for Multi-Task Multimodal Pre-Training

Large-scale multimodal pre-trained models like CLIP rely heavily on high-quality training data, yet raw web-crawled datasets are often noisy, misaligned, and redundant, leading to inefficient training and suboptimal generalization. Existing data selection methods are either heuristic-based, suffering from bias and limited diversity, or data-driven but task-agnostic, failing to optimize for multi-task scenarios. To address these gaps, we introduce TADS (Task-Aware Data Selection), a novel framework for multi-task multimodal pre-training that integrates Intrinsic Quality, Task Relevance, and Distributional Diversity into a learnable value function. TADS employs a comprehensive quality assessment system with unimodal and cross-modal operators, quantifies task relevance via interpretable similarity vectors, and optimizes diversity through cluster-based weighting. A feedback-driven meta-learning mechanism adaptively refines the selection strategy based on proxy model performance across multiple downstream tasks. Experiments on CC12M demonstrate that TADS achieves superior zero-shot performance on benchmarks like ImageNet, CIFAR-100, MS-COCO, and Flickr30K, using only 36% of the data while outperforming baselines by an average of 1.0%. This highlights that TADS significantly enhances data efficiency by curating a high-utility subset that yields a much higher performance ceiling within the same computational constraints.

  • 7 authors
·
Feb 4

Rewiring Experts on the Fly:Continuous Rerouting for Better Online Adaptation in Mixture-of-Expert models

Mixture-of-Experts (MoE) models achieve efficient scaling through sparse expert activation, but often suffer from suboptimal routing decisions due to distribution shifts in deployment. While existing test-time adaptation methods could potentially address these issues, they primarily focus on dense models and require access to external data, limiting their practical applicability to MoE architectures. However, we find that, instead of relying on reference data, we can optimize MoE expert selection on-the-fly based only on input context. As such, we propose a data-free, online test-time framework that continuously adapts MoE routing decisions during text generation without external supervision or data. Our method cycles between two phases: During the prefill stage, and later in regular intervals, we optimize the routing decisions of the model using self-supervision based on the already generated sequence. Then, we generate text as normal, maintaining the modified router until the next adaption. We implement this through lightweight additive vectors that only update router logits in selected layers, maintaining computational efficiency while preventing over-adaptation. The experimental results show consistent performance gains on challenging reasoning tasks while maintaining robustness to context shifts. For example, our method achieves a 5.5\% improvement on HumanEval with OLMoE. Furthermore, owing to its plug-and-play property, our method naturally complements existing test-time scaling techniques, e.g., achieving 6\% average gains when incorporated with self-consistency on DeepSeek-V2-Lite.

  • 6 authors
·
Oct 16, 2025 3

Holistic Agent Leaderboard: The Missing Infrastructure for AI Agent Evaluation

AI agents have been developed for complex real-world tasks from coding to customer service. But AI agent evaluations suffer from many challenges that undermine our understanding of how well agents really work. We introduce the Holistic Agent Leaderboard (HAL) to address these challenges. We make three main contributions. First, we provide a standardized evaluation harness that orchestrates parallel evaluations across hundreds of VMs, reducing evaluation time from weeks to hours while eliminating common implementation bugs. Second, we conduct three-dimensional analysis spanning models, scaffolds, and benchmarks. We validate the harness by conducting 21,730 agent rollouts across 9 models and 9 benchmarks in coding, web navigation, science, and customer service with a total cost of about $40,000. Our analysis reveals surprising insights, such as higher reasoning effort reducing accuracy in the majority of runs. Third, we use LLM-aided log inspection to uncover previously unreported behaviors, such as searching for the benchmark on HuggingFace instead of solving a task, or misusing credit cards in flight booking tasks. We share all agent logs, comprising 2.5B tokens of language model calls, to incentivize further research into agent behavior. By standardizing how the field evaluates agents and addressing common pitfalls in agent evaluation, we hope to shift the focus from agents that ace benchmarks to agents that work reliably in the real world.

  • 31 authors
·
Oct 12, 2025

Governed Evolution of Agent Runtimes through Executable Operational Cognition

Recent advances in agentic systems increasingly treat code as an executable operational substrate rather than as a disposable output artifact. Prior work such as Code as Agent Harness frames validated agent-generated artifacts as runtime entities that can be created, executed, revised, persisted, and reused within long-running cognitive loops. However, the governance, lifecycle management, and operational evolution of such artifacts remain under-specified. This paper proposes a framework for governed runtime evolution in multi-agent systems through executable operational cognition. We formalize agent-generated artifacts as persistent runtime capabilities that progressively become part of the operational substrate rather than transient intermediate outputs. Building on this perspective, we introduce HarnessMutation as a governed mechanism for lifecycle-aware runtime adaptation operating under explicit validation, traceability, evaluation, and rollback constraints. Rather than treating runtime adaptation as unrestricted self-modification, the proposed framework models evolution as a bounded and observable process over persistent operational memory. It further shows how these ideas can be operationalized over modern agent runtimes and governance-oriented orchestration systems, providing a conceptual foundation for adaptive infrastructures whose evolution remains explicit, auditable, and constrained.

  • 1 authors
·
May 25

Exploring Learngene via Stage-wise Weight Sharing for Initializing Variable-sized Models

In practice, we usually need to build variable-sized models adapting for diverse resource constraints in different application scenarios, where weight initialization is an important step prior to training. The Learngene framework, introduced recently, firstly learns one compact part termed as learngene from a large well-trained model, after which learngene is expanded to initialize variable-sized models. In this paper, we start from analysing the importance of guidance for the expansion of well-trained learngene layers, inspiring the design of a simple but highly effective Learngene approach termed SWS (Stage-wise Weight Sharing), where both learngene layers and their learning process critically contribute to providing knowledge and guidance for initializing models at varying scales. Specifically, to learn learngene layers, we build an auxiliary model comprising multiple stages where the layer weights in each stage are shared, after which we train it through distillation. Subsequently, we expand these learngene layers containing stage information at their corresponding stage to initialize models of variable depths. Extensive experiments on ImageNet-1K demonstrate that SWS achieves consistent better performance compared to many models trained from scratch, while reducing around 6.6x total training costs. In some cases, SWS performs better only after 1 epoch tuning. When initializing variable-sized models adapting for different resource constraints, SWS achieves better results while reducing around 20x parameters stored to initialize these models and around 10x pre-training costs, in contrast to the pre-training and fine-tuning approach.

  • 4 authors
·
Apr 25, 2024

TAROT: Targeted Data Selection via Optimal Transport

We propose TAROT, a targeted data selection framework grounded in optimal transport theory. Previous targeted data selection methods primarily rely on influence-based greedy heuristics to enhance domain-specific performance. While effective on limited, unimodal data (i.e., data following a single pattern), these methods struggle as target data complexity increases. Specifically, in multimodal distributions, these heuristics fail to account for multiple inherent patterns, leading to suboptimal data selection. This work identifies two primary factors contributing to this limitation: (i) the disproportionate impact of dominant feature components in high-dimensional influence estimation, and (ii) the restrictive linear additive assumptions inherent in greedy selection strategies. To address these challenges, TAROT incorporates whitened feature distance to mitigate dominant feature bias, providing a more reliable measure of data influence. Building on this, TAROT uses whitened feature distance to quantify and minimize the optimal transport distance between the selected data and target domains. Notably, this minimization also facilitates the estimation of optimal selection ratios. We evaluate TAROT across multiple tasks, including semantic segmentation, motion prediction, and instruction tuning. Results consistently show that TAROT outperforms state-of-the-art methods, highlighting its versatility across various deep learning tasks. Code is available at https://github.com/vita-epfl/TAROT.

  • 4 authors
·
Nov 30, 2024

SWE-PRBench: Benchmarking AI Code Review Quality Against Pull Request Feedback

We introduce SWE-PRBench, a benchmark of 350 pull requests with human-annotated ground truth for evaluating AI code review quality. Evaluated against an LLM-as-judge framework validated at kappa=0.75, 8 frontier models detect only 15-31% of human-flagged issues on the diff-only configuration, demonstrating that AI code review remains far below human expert performance despite strong results on code generation benchmarks. Pull requests are drawn from active open-source repositories, filtered from 700 candidates using a Repository Quality Score, and evaluated under three frozen context configurations: diff only (config_A), diff with file content (config_B), and full context (config_C), enabling systematic ablation of context provision strategies. All 8 models degrade monotonically from config_A to config_C, even when context is provided via structured semantic layers including AST-extracted function context and import graph resolution. The dominant mechanism is a collapse of Type2_Contextual issue detection at config_B, consistent with attention dilution in long contexts: a structured 2,000-token diff-with-summary prompt outperforms a 2,500-token full-context prompt enriched with execution context, behaviour mapping, and test signatures across all 8 models. The top four models are statistically indistinguishable (mean score 0.147-0.153) while a clear tier gap separates them from the remaining four (mean score <= 0.113). Dataset, contexts, annotations, and evaluation harness are released publicly.

  • 1 authors
·
Mar 27

Language Models Improve When Pretraining Data Matches Target Tasks

Every data selection method inherently has a target. In practice, these targets often emerge implicitly through benchmark-driven iteration: researchers develop selection strategies, train models, measure benchmark performance, then refine accordingly. This raises a natural question: what happens when we make this optimization explicit? To explore this, we propose benchmark-targeted ranking (BETR), a simple method that selects pretraining documents based on similarity to benchmark training examples. BETR embeds benchmark examples and a sample of pretraining documents in a shared space, scores this sample by similarity to benchmarks, then trains a lightweight classifier to predict these scores for the full corpus. We compare data selection methods by training over 500 models spanning 10^{19} to 10^{22} FLOPs and fitting scaling laws to them. From this, we find that simply aligning pretraining data to evaluation benchmarks using BETR achieves a 2.1x compute multiplier over DCLM-Baseline (4.7x over unfiltered data) and improves performance on 9 out of 10 tasks across all scales. BETR also generalizes well: when targeting a diverse set of benchmarks disjoint from our evaluation suite, it still matches or outperforms baselines. Our scaling analysis further reveals a clear trend: larger models require less aggressive filtering. Overall, our findings show that directly matching pretraining data to target tasks precisely shapes model capabilities and highlight that optimal selection strategies must adapt to model scale.

  • 10 authors
·
Jul 16, 2025

LEVI: Stronger Search Architectures Can Substitute for Larger LLMs in Evolutionary Search

LLM-guided evolutionary methods such as AlphaEvolve have proven effective in domains like math, systems research, and algorithmic discovery, but their reliance on frontier models makes each run expensive. We argue this is largely an artifact of how existing frameworks allocate search: archives that fail to preserve solution diversity force compensation through stronger mutation models; blind model use spends frontier dollars on local edits a smaller model could handle; and full-set evaluation wastes rollouts on redundant examples. We introduce LEVI, a harness-first evolutionary framework built on the bet that stronger search architectures can substitute for or even outperform larger LLMs in evolutionary search. LEVI improves on three core components of evolutionary search: a solution database that establishes diversity from the beginning, and then maintains it throughout the run; a smarter mutation router that plays into the strengths of large and small LLMs; and a rank-preserving proxy benchmark for rollout-heavy settings. Across systems-research benchmarks LEVI attains the highest score on a budget 3.3-6.7x smaller than the published frontier-model runs of existing frameworks like ShinkaEvolve, GEPA, and AdaEvolve; on one problem, LEVI matches the existing best at a 35x lower cost. On prompt optimization, LEVI matches or exceeds GEPA at less than half of its rollout budget on four different benchmarks. LEVI is available as an open-source framework at https://github.com/ttanv/levi.

  • 1 authors
·
May 9

DynaMoE: Dynamic Token-Level Expert Activation with Layer-Wise Adaptive Capacity for Mixture-of-Experts Neural Networks

Mixture-of-Experts (MoE) architectures have emerged as a powerful paradigm for scaling neural networks while maintaining computational efficiency. However, standard MoE implementations rely on two rigid design assumptions: (1) fixed Top-K routing where exactly K experts are activated per token, and (2) uniform expert allocation across all layers. This paper introduces DynaMoE, a novel MoE framework that relaxes both constraints through dynamic token-level expert activation and layer-wise adaptive capacity allocation. DynaMoE introduces a principled routing mechanism where the number of active experts per token varies based on input complexity. Concurrently, the framework implements six distinct scheduling strategies for distributing expert capacity across network depth, including descending, ascending, pyramid, and wave patterns. We theoretically analyze the expressivity gains of dynamic routing and derive bounds on computational efficiency. Through extensive experiments on MNIST, Fashion-MNIST, CIFAR-10 (image classification), and Recycling-the-Web (language modeling) across multiple model scales, we demonstrate that DynaMoE achieves superior parameter efficiency compared to static baselines. Our key finding is that optimal expert schedules are task- and scale-dependent: descending schedules (concentrating capacity in early layers) outperform uniform baselines on image classification. For language modeling, optimal schedules vary by model size, descending for Tiny, ascending for Small, and uniform for Medium. Furthermore, dynamic routing reduces gradient variance during training, leading to improved convergence stability. DynaMoE establishes a new framework for adaptive computation in neural networks, providing principled guidance for MoE architecture design.

  • 1 authors
·
Mar 2 2

MoS: Unleashing Parameter Efficiency of Low-Rank Adaptation with Mixture of Shards

The rapid scaling of large language models necessitates more lightweight finetuning methods to reduce the explosive GPU memory overhead when numerous customized models are served simultaneously. Targeting more parameter-efficient low-rank adaptation (LoRA), parameter sharing presents a promising solution. Empirically, our research into high-level sharing principles highlights the indispensable role of differentiation in reversing the detrimental effects of pure sharing. Guided by this finding, we propose Mixture of Shards (MoS), incorporating both inter-layer and intra-layer sharing schemes, and integrating four nearly cost-free differentiation strategies, namely subset selection, pair dissociation, vector sharding, and shard privatization. Briefly, it selects a designated number of shards from global pools with a Mixture-of-Experts (MoE)-like routing mechanism before sequentially concatenating them to low-rank matrices. Hence, it retains all the advantages of LoRA while offering enhanced parameter efficiency, and effectively circumvents the drawbacks of peer parameter-sharing methods. Our empirical experiments demonstrate approximately 8x parameter savings in a standard LoRA setting. The ablation study confirms the significance of each component. Our insights into parameter sharing and MoS method may illuminate future developments of more parameter-efficient finetuning methods.

  • 8 authors
·
Oct 1, 2024

Making, not Taking, the Best of N

Obtaining high-quality generations in modern LLMs has largely been framed as a selection problem: identifying a single winning generation from a diverse pool of N samples, the Best-of-N (BoN). Yet, this approach is inherently zero-sum, discarding diverse and potentially useful information from the pool. Instead, we explore a collaborative setup, where all candidates can potentially contribute to the final winning generation. To this end, we propose Fusion-of-N (FusioN): a method that uses a general LLM judge to synthesize the most informative elements of each sample into a single final answer. We compare FusioN to BoN in two settings, (i) test-time scaling, where we sample and aggregate from a single model at test-time (ii) synthetic data generation, where we fuse samples from a pool of diverse teachers to improve a student model. We extensively benchmark both setups across 11 languages, 3 diverse tasks and varying model scales. Across the bench, FusioN consistently outperforms BoN showing versatility and robustness both in test-time scaling and in downstream gains from synthetic data generation. We also perform extensive analysis on FusioN, where it shows surprising strengths and robustness under challenging settings. These results show that we should shift how we think about evaluating and utilizing LLM generations from a monolithic measure of quality, to embracing their polylithic nature. This shift allows us to integrate diverse strengths, unlock latent potential, and achieve improvements that were previously inaccessible through selection alone.

CohereLabs Cohere Labs
·
Oct 1, 2025 2

Improving Influence-based Instruction Tuning Data Selection for Balanced Learning of Diverse Capabilities

Selecting appropriate training data is crucial for effective instruction fine-tuning of large language models (LLMs), which aims to (1) elicit strong capabilities, and (2) achieve balanced performance across a diverse range of tasks. Influence-based methods show promise in achieving (1) by estimating the contribution of each training example to the model's predictions, but often struggle with (2). Our systematic investigation reveals that this underperformance can be attributed to an inherent bias where certain tasks intrinsically have greater influence than others. As a result, data selection is often biased towards these tasks, not only hurting the model's performance on others but also, counterintuitively, harms performance on these high-influence tasks themselves. As a remedy, we propose BIDS, a Balanced and Influential Data Selection algorithm. BIDS first normalizes influence scores of the training data, and then iteratively balances data selection by choosing the training example with the highest influence on the most underrepresented task. Experiments with both Llama-3 and Mistral-v0.3 on seven benchmarks spanning five diverse capabilities show that BIDS consistently outperforms both state-of-the-art influence-based algorithms and other non-influence-based selection frameworks. Surprisingly, training on a 15% subset selected by BIDS can even outperform full-dataset training with a much more balanced performance. Our analysis further highlights the importance of both instance-level normalization and iterative optimization of selected data for balanced learning of diverse capabilities.

  • 4 authors
·
Jan 21, 2025

Enhancing Neural Subset Selection: Integrating Background Information into Set Representations

Learning neural subset selection tasks, such as compound selection in AI-aided drug discovery, have become increasingly pivotal across diverse applications. The existing methodologies in the field primarily concentrate on constructing models that capture the relationship between utility function values and subsets within their respective supersets. However, these approaches tend to overlook the valuable information contained within the superset when utilizing neural networks to model set functions. In this work, we address this oversight by adopting a probabilistic perspective. Our theoretical findings demonstrate that when the target value is conditioned on both the input set and subset, it is essential to incorporate an invariant sufficient statistic of the superset into the subset of interest for effective learning. This ensures that the output value remains invariant to permutations of the subset and its corresponding superset, enabling identification of the specific superset from which the subset originated. Motivated by these insights, we propose a simple yet effective information aggregation module designed to merge the representations of subsets and supersets from a permutation invariance perspective. Comprehensive empirical evaluations across diverse tasks and datasets validate the enhanced efficacy of our approach over conventional methods, underscoring the practicality and potency of our proposed strategies in real-world contexts.

  • 8 authors
·
Feb 5, 2024

Multi-Objective GFlowNets

In many applications of machine learning, like drug discovery and material design, the goal is to generate candidates that simultaneously maximize a set of objectives. As these objectives are often conflicting, there is no single candidate that simultaneously maximizes all objectives, but rather a set of Pareto-optimal candidates where one objective cannot be improved without worsening another. Moreover, in practice, these objectives are often under-specified, making the diversity of candidates a key consideration. The existing multi-objective optimization methods focus predominantly on covering the Pareto front, failing to capture diversity in the space of candidates. Motivated by the success of GFlowNets for generation of diverse candidates in a single objective setting, in this paper we consider Multi-Objective GFlowNets (MOGFNs). MOGFNs consist of a novel Conditional GFlowNet which models a family of single-objective sub-problems derived by decomposing the multi-objective optimization problem. Our work is the first to empirically demonstrate conditional GFlowNets. Through a series of experiments on synthetic and benchmark tasks, we empirically demonstrate that MOGFNs outperform existing methods in terms of Hypervolume, R2-distance and candidate diversity. We also demonstrate the effectiveness of MOGFNs over existing methods in active learning settings. Finally, we supplement our empirical results with a careful analysis of each component of MOGFNs.

  • 7 authors
·
Oct 23, 2022

Selective Sinkhorn Routing for Improved Sparse Mixture of Experts

Sparse Mixture-of-Experts (SMoE) has gained prominence as a scalable and computationally efficient architecture, enabling significant growth in model capacity without incurring additional inference costs. However, existing SMoE models often rely on auxiliary losses (e.g., z-loss, load balancing) and additional trainable parameters (e.g., noisy gating) to encourage expert diversity, leading to objective misalignment and increased model complexity. Moreover, existing Sinkhorn-based methods suffer from significant training overhead due to their heavy reliance on the computationally expensive Sinkhorn algorithm. In this work, we formulate token-to-expert assignment as an optimal transport problem, incorporating constraints to ensure balanced expert utilization. We demonstrate that introducing a minimal degree of optimal transport-based routing enhances SMoE performance without requiring auxiliary balancing losses. Unlike previous methods, our approach derives gating scores directly from the transport map, enabling more effective token-to-expert balancing, supported by both theoretical analysis and empirical results. Building on these insights, we propose Selective Sinkhorn Routing (SSR), a routing mechanism that replaces auxiliary loss with lightweight Sinkhorn-based routing. SSR promotes balanced token assignments while preserving flexibility in expert selection. Across both language modeling and image classification tasks, SSR achieves faster training, higher accuracy, and greater robustness to input corruption.

  • 5 authors
·
Nov 11, 2025

MToP: A MATLAB Benchmarking Platform for Evolutionary Multitasking

Evolutionary multitasking (EMT) has emerged as a popular topic of evolutionary computation over the past decade. It aims to concurrently address multiple optimization tasks within limited computing resources, leveraging inter-task knowledge transfer techniques. Despite the abundance of multitask evolutionary algorithms (MTEAs) proposed for multitask optimization (MTO), there remains a need for a comprehensive software platform to help researchers evaluate MTEA performance on benchmark MTO problems as well as explore real-world applications. To bridge this gap, we introduce the first open-source benchmarking platform, named MToP, for EMT. MToP incorporates over 50 MTEAs, more than 200 MTO problem cases with real-world applications, and over 20 performance metrics. Based on these, we provide benchmarking recommendations tailored for different MTO scenarios. Moreover, to facilitate comparative analyses between MTEAs and traditional evolutionary algorithms, we adapted over 50 popular single-task evolutionary algorithms to address MTO problems. Notably, we release extensive pre-run experimental data on benchmark suites to enhance reproducibility and reduce computational overhead for researchers. MToP features a user-friendly graphical interface, facilitating results analysis, data export, and schematic visualization. More importantly, MToP is designed with extensibility in mind, allowing users to develop new algorithms and tackle emerging problem domains. The source code of MToP is available at: https://github.com/intLyc/MTO-Platform

  • 7 authors
·
Dec 13, 2023

Pareto Domain Adaptation

Domain adaptation (DA) attempts to transfer the knowledge from a labeled source domain to an unlabeled target domain that follows different distribution from the source. To achieve this, DA methods include a source classification objective to extract the source knowledge and a domain alignment objective to diminish the domain shift, ensuring knowledge transfer. Typically, former DA methods adopt some weight hyper-parameters to linearly combine the training objectives to form an overall objective. However, the gradient directions of these objectives may conflict with each other due to domain shift. Under such circumstances, the linear optimization scheme might decrease the overall objective value at the expense of damaging one of the training objectives, leading to restricted solutions. In this paper, we rethink the optimization scheme for DA from a gradient-based perspective. We propose a Pareto Domain Adaptation (ParetoDA) approach to control the overall optimization direction, aiming to cooperatively optimize all training objectives. Specifically, to reach a desirable solution on the target domain, we design a surrogate loss mimicking target classification. To improve target-prediction accuracy to support the mimicking, we propose a target-prediction refining mechanism which exploits domain labels via Bayes' theorem. On the other hand, since prior knowledge of weighting schemes for objectives is often unavailable to guide optimization to approach the optimal solution on the target domain, we propose a dynamic preference mechanism to dynamically guide our cooperative optimization by the gradient of the surrogate loss on a held-out unlabeled target dataset. Extensive experiments on image classification and semantic segmentation benchmarks demonstrate the effectiveness of ParetoDA

  • 8 authors
·
Dec 8, 2021

Resolving Interference When Merging Models

Transfer learning - i.e., further fine-tuning a pre-trained model on a downstream task - can confer significant advantages, including improved downstream performance, faster convergence, and better sample efficiency. These advantages have led to a proliferation of task-specific fine-tuned models, which typically can only perform a single task and do not benefit from one another. Recently, model merging techniques have emerged as a solution to combine multiple task-specific models into a single multitask model without performing additional training. However, existing merging methods often ignore the interference between parameters of different models, resulting in large performance drops when merging multiple models. In this paper, we demonstrate that prior merging techniques inadvertently lose valuable information due to two major sources of interference: (a) interference due to redundant parameter values and (b) disagreement on the sign of a given parameter's values across models. To address this, we propose our method, TrIm, Elect Sign & Merge (TIES-Merging), which introduces three novel steps when merging models: (1) resetting parameters that only changed a small amount during fine-tuning, (2) resolving sign conflicts, and (3) merging only the parameters that are in alignment with the final agreed-upon sign. We find that TIES-Merging outperforms several existing methods in diverse settings covering a range of modalities, domains, number of tasks, model sizes, architectures, and fine-tuning settings. We further analyze the impact of different types of interference on model parameters, highlight the importance of resolving sign interference. Our code is available at https://github.com/prateeky2806/ties-merging

  • 5 authors
·
Jun 2, 2023 1

DREAM: Scalable Red Teaming for Text-to-Image Generative Systems via Distribution Modeling

Despite the integration of safety alignment and external filters, text-to-image (T2I) generative models are still susceptible to producing harmful content, such as sexual or violent imagery. This raises serious concerns about unintended exposure and potential misuse. Red teaming, which aims to proactively identify diverse prompts that can elicit unsafe outputs from the T2I system (including the core generative model as well as potential external safety filters and other processing components), is increasingly recognized as an essential method for assessing and improving safety before real-world deployment. Yet, existing automated red teaming approaches often treat prompt discovery as an isolated, prompt-level optimization task, which limits their scalability, diversity, and overall effectiveness. To bridge this gap, in this paper, we propose DREAM, a scalable red teaming framework to automatically uncover diverse problematic prompts from a given T2I system. Unlike most prior works that optimize prompts individually, DREAM directly models the probabilistic distribution of the target system's problematic prompts, which enables explicit optimization over both effectiveness and diversity, and allows efficient large-scale sampling after training. To achieve this without direct access to representative training samples, we draw inspiration from energy-based models and reformulate the objective into simple and tractable objectives. We further introduce GC-SPSA, an efficient optimization algorithm that provide stable gradient estimates through the long and potentially non-differentiable T2I pipeline. The effectiveness of DREAM is validated through extensive experiments, demonstrating that it surpasses 9 state-of-the-art baselines by a notable margin across a broad range of T2I models and safety filters in terms of prompt success rate and diversity.

  • 10 authors
·
Jul 22, 2025

Unified Embedding: Battle-Tested Feature Representations for Web-Scale ML Systems

Learning high-quality feature embeddings efficiently and effectively is critical for the performance of web-scale machine learning systems. A typical model ingests hundreds of features with vocabularies on the order of millions to billions of tokens. The standard approach is to represent each feature value as a d-dimensional embedding, introducing hundreds of billions of parameters for extremely high-cardinality features. This bottleneck has led to substantial progress in alternative embedding algorithms. Many of these methods, however, make the assumption that each feature uses an independent embedding table. This work introduces a simple yet highly effective framework, Feature Multiplexing, where one single representation space is used across many different categorical features. Our theoretical and empirical analysis reveals that multiplexed embeddings can be decomposed into components from each constituent feature, allowing models to distinguish between features. We show that multiplexed representations lead to Pareto-optimal parameter-accuracy tradeoffs for three public benchmark datasets. Further, we propose a highly practical approach called Unified Embedding with three major benefits: simplified feature configuration, strong adaptation to dynamic data distributions, and compatibility with modern hardware. Unified embedding gives significant improvements in offline and online metrics compared to highly competitive baselines across five web-scale search, ads, and recommender systems, where it serves billions of users across the world in industry-leading products.

  • 7 authors
·
May 20, 2023

Building a Winning Team: Selecting Source Model Ensembles using a Submodular Transferability Estimation Approach

Estimating the transferability of publicly available pretrained models to a target task has assumed an important place for transfer learning tasks in recent years. Existing efforts propose metrics that allow a user to choose one model from a pool of pre-trained models without having to fine-tune each model individually and identify one explicitly. With the growth in the number of available pre-trained models and the popularity of model ensembles, it also becomes essential to study the transferability of multiple-source models for a given target task. The few existing efforts study transferability in such multi-source ensemble settings using just the outputs of the classification layer and neglect possible domain or task mismatch. Moreover, they overlook the most important factor while selecting the source models, viz., the cohesiveness factor between them, which can impact the performance and confidence in the prediction of the ensemble. To address these gaps, we propose a novel Optimal tranSport-based suBmOdular tRaNsferability metric (OSBORN) to estimate the transferability of an ensemble of models to a downstream task. OSBORN collectively accounts for image domain difference, task difference, and cohesiveness of models in the ensemble to provide reliable estimates of transferability. We gauge the performance of OSBORN on both image classification and semantic segmentation tasks. Our setup includes 28 source datasets, 11 target datasets, 5 model architectures, and 2 pre-training methods. We benchmark our method against current state-of-the-art metrics MS-LEEP and E-LEEP, and outperform them consistently using the proposed approach.

  • 6 authors
·
Sep 5, 2023

Glider: Global and Local Instruction-Driven Expert Router

The availability of performant pre-trained models has led to a proliferation of fine-tuned expert models that are specialized to particular domains. This has enabled the creation of powerful and adaptive routing-based "Model MoErging" methods with the goal of using expert modules to create an aggregate system with improved performance or generalization. However, existing MoErging methods often prioritize generalization to unseen tasks at the expense of performance on held-in tasks, which limits its practical applicability in real-world deployment scenarios. We observe that current token-level routing mechanisms neglect the global semantic context of the input task. This token-wise independence hinders effective expert selection for held-in tasks, as routing decisions fail to incorporate the semantic properties of the task. To address this, we propose, Global and Local Instruction Driven Expert Router (GLIDER) that integrates a multi-scale routing mechanism, encompassing a semantic global router and a learned local router. The global router leverages LLM's advanced reasoning capabilities for semantic-related contexts to enhance expert selection. Given the input query and LLM, the router generates semantic task instructions that guide the retrieval of the most relevant experts across all layers. This global guidance is complemented by a local router that facilitates token-level routing decisions within each module, enabling finer control and enhanced performance on unseen tasks. Our experiments using T5-based models for T0 and FLAN tasks demonstrate that GLIDER achieves substantially improved held-in performance while maintaining strong generalization on held-out tasks. We also perform ablations experiments to dive deeper into the components of GLIDER. Our experiments highlight the importance of our multi-scale routing that leverages LLM-driven semantic reasoning for MoErging methods.

  • 7 authors
·
Oct 9, 2024

A Systematic Study of In-the-Wild Model Merging for Large Language Models

Model merging combines multiple fine-tuned checkpoints into a single model without additional training, offering an attractive approach to reusing models and efficiently improving performance. However, it remains unclear whether the advantages reported for settings where all merged experts have distinct roles and are tuned on clearly separated tasks also hold in settings where the merged experts do not have clearly distinct roles, but are trained on overlapping or even conflicting objectives. To evaluate this setting, we present a large-scale, systematic evaluation of "in-the-wild" model merging of heterogeneous experts, that may have been trained on overlapping or conflicting objectives. Concretely, we evaluate six state-of-the-art merging methods, including recent subspace methods, across four open-weight LLMs, twelve fine-tuned checkpoints per base model, and sixteen standard LLM benchmarks. Evaluating through standardized benchmarks, we measure both the probability that a model merged from a heterogeneous set of experts outperforms the base model and we measure relative gains over the best individual checkpoint. Our results show that the oldest and simplest method, Task Arithmetic, is the only approach that reliably yields performance gains on LLMs in this "in-the-wild" setting. Other interference-aware and subspace merging methods typically do not result in notable improvements over the base model. Our findings indicate that current merging techniques mostly do not enable extracting useful weight updates from heterogeneous and potentially conflicting versions. This motivates the design of LLM-specific merging algorithms and merging-aware fine-tuning methods.

  • 3 authors
·
Mar 28

carps: A Framework for Comparing N Hyperparameter Optimizers on M Benchmarks

Hyperparameter Optimization (HPO) is crucial to develop well-performing machine learning models. In order to ease prototyping and benchmarking of HPO methods, we propose carps, a benchmark framework for Comprehensive Automated Research Performance Studies allowing to evaluate N optimizers on M benchmark tasks. In this first release of carps, we focus on the four most important types of HPO task types: blackbox, multi-fidelity, multi-objective and multi-fidelity-multi-objective. With 3 336 tasks from 5 community benchmark collections and 28 variants of 9 optimizer families, we offer the biggest go-to library to date to evaluate and compare HPO methods. The carps framework relies on a purpose-built, lightweight interface, gluing together optimizers and benchmark tasks. It also features an analysis pipeline, facilitating the evaluation of optimizers on benchmarks. However, navigating a huge number of tasks while developing and comparing methods can be computationally infeasible. To address this, we obtain a subset of representative tasks by minimizing the star discrepancy of the subset, in the space spanned by the full set. As a result, we propose an initial subset of 10 to 30 diverse tasks for each task type, and include functionality to re-compute subsets as more benchmarks become available, enabling efficient evaluations. We also establish a first set of baseline results on these tasks as a measure for future comparisons. With carps (https://www.github.com/automl/CARP-S), we make an important step in the standardization of HPO evaluation.

  • 17 authors
·
Jun 6, 2025

Tryage: Real-time, intelligent Routing of User Prompts to Large Language Models

The introduction of the transformer architecture and the self-attention mechanism has led to an explosive production of language models trained on specific downstream tasks and data domains. With over 200, 000 models in the Hugging Face ecosystem, users grapple with selecting and optimizing models to suit multifaceted workflows and data domains while addressing computational, security, and recency concerns. There is an urgent need for machine learning frameworks that can eliminate the burden of model selection and customization and unleash the incredible power of the vast emerging model library for end users. Here, we propose a context-aware routing system, Tryage, that leverages a language model router for optimal selection of expert models from a model library based on analysis of individual input prompts. Inspired by the thalamic router in the brain, Tryage employs a perceptive router to predict down-stream model performance on prompts and, then, makes a routing decision using an objective function that integrates performance predictions with user goals and constraints that are incorporated through flags (e.g., model size, model recency). Tryage allows users to explore a Pareto front and automatically trade-off between task accuracy and secondary goals including minimization of model size, recency, security, verbosity, and readability. Across heterogeneous data sets that include code, text, clinical data, and patents, the Tryage framework surpasses Gorilla and GPT3.5 turbo in dynamic model selection identifying the optimal model with an accuracy of 50.9% , compared to 23.6% by GPT 3.5 Turbo and 10.8% by Gorilla. Conceptually, Tryage demonstrates how routing models can be applied to program and control the behavior of multi-model LLM systems to maximize efficient use of the expanding and evolving language model ecosystem.

  • 2 authors
·
Aug 22, 2023

A Theoretical Framework for Auxiliary-Loss-Free Load Balancing of Sparse Mixture-of-Experts in Large-Scale AI Models

In large-scale AI training, Sparse Mixture-of-Experts (s-MoE) layers enable scaling by activating only a small subset of experts per token. An operational challenge in this design is load balancing: routing tokens to minimize the number of idle experts, which is important for the efficient utilization of (costly) GPUs. We provide a theoretical framework for analyzing the Auxiliary-Loss-Free Load Balancing (ALF-LB) procedure -- proposed by DeepSeek's Wang et al. (2024) -- by casting it as a one-step-per-iteration primal-dual method for an assignment problem. First, in a stylized deterministic setting, our framework yields several insightful structural properties: (i) a monotonic improvement of a Lagrangian objective, (ii) a preference rule that moves tokens from overloaded to underloaded experts, and (iii) an approximate-balancing guarantee. Then, we incorporate the stochastic and dynamic nature of AI training using a generalized online optimization formulation. In the online setting, we derive a strong convexity property of the objective that leads to a logarithmic expected regret bound under certain step-size choices. Additionally, we present real experiments on 1B-parameter DeepSeekMoE models to complement our theoretical findings. Together, these results build a principled framework for analyzing the Auxiliary-Loss-Free Load Balancing of s-MoE in AI models.

Uchicago University of Chicago
·
Dec 3, 2025 2

AdaptOrch: Task-Adaptive Multi-Agent Orchestration in the Era of LLM Performance Convergence

As large language models from diverse providers converge toward comparable benchmark performance, the traditional paradigm of selecting a single best model per task yields diminishing returns. We argue that orchestration topology -- the structural composition of how multiple agents are coordinated, parallelized, and synthesized -- now dominates system-level performance over individual model capability. We present AdaptOrch, a formal framework for task-adaptive multi-agent orchestration that dynamically selects among four canonical topologies (parallel, sequential, hierarchical, and hybrid) based on task dependency graphs and empirically derived domain characteristics. Our framework introduces three key contributions: (1) a Performance Convergence Scaling Law, formalizing conditions under which orchestration selection outweighs model selection; (2) a Topology Routing Algorithm that maps task decomposition DAGs to optimal orchestration patterns in O(|V| + |E|) time; and (3) an Adaptive Synthesis Protocol with provable termination guarantees and heuristic consistency scoring for parallel agent outputs. We validate AdaptOrch across coding (SWE-bench), reasoning (GPQA), and retrieval-augmented generation tasks, demonstrating that topology-aware orchestration achieves 12-23% improvement over static single-topology baselines, even when using identical underlying models. Our results establish orchestration design as a first-class optimization target independent of model scaling.

  • 1 authors
·
Feb 18 1

MedSAMix: A Training-Free Model Merging Approach for Medical Image Segmentation

Universal medical image segmentation models have emerged as a promising paradigm due to their strong generalizability across diverse tasks, showing great potential for a wide range of clinical applications. This potential has been partly driven by the success of general-purpose vision models such as the Segment Anything Model (SAM), which has inspired the development of various fine-tuned variants for medical segmentation tasks. However, fine-tuned variants like MedSAM are trained on comparatively limited medical imaging data that often suffers from heterogeneity, scarce annotations, and distributional shifts. These challenges limit their ability to generalize across a wide range of medical segmentation tasks. In this regard, we propose MedSAMix, a training-free model merging method that integrates the strengths of both generalist models (e.g., SAM) and specialist models (e.g., MedSAM) for medical image segmentation. In contrast to traditional model merging approaches that rely on manual configuration and often result in suboptimal outcomes, we propose a zero-order optimization method to automatically discover optimal layer-wise merging solutions. Furthermore, for clinical applications, we develop two regimes to meet the demand of domain-specificity and generalizability in different scenarios by single-task optimization and multi-objective optimization respectively. Extensive evaluations on 25 medical segmentation tasks demonstrate that MedSAMix effectively mitigates model bias and consistently improves performance in both domain-specific accuracy and generalization, achieving improvements of 6.67% on specialized tasks and 4.37% on multi-task evaluations.

  • 6 authors
·
Aug 14, 2025 2

Generalizing Few-Shot NAS with Gradient Matching

Efficient performance estimation of architectures drawn from large search spaces is essential to Neural Architecture Search. One-Shot methods tackle this challenge by training one supernet to approximate the performance of every architecture in the search space via weight-sharing, thereby drastically reducing the search cost. However, due to coupled optimization between child architectures caused by weight-sharing, One-Shot supernet's performance estimation could be inaccurate, leading to degraded search outcomes. To address this issue, Few-Shot NAS reduces the level of weight-sharing by splitting the One-Shot supernet into multiple separated sub-supernets via edge-wise (layer-wise) exhaustive partitioning. Since each partition of the supernet is not equally important, it necessitates the design of a more effective splitting criterion. In this work, we propose a gradient matching score (GM) that leverages gradient information at the shared weight for making informed splitting decisions. Intuitively, gradients from different child models can be used to identify whether they agree on how to update the shared modules, and subsequently to decide if they should share the same weight. Compared with exhaustive partitioning, the proposed criterion significantly reduces the branching factor per edge. This allows us to split more edges (layers) for a given budget, resulting in substantially improved performance as NAS search spaces usually include dozens of edges (layers). Extensive empirical evaluations of the proposed method on a wide range of search spaces (NASBench-201, DARTS, MobileNet Space), datasets (cifar10, cifar100, ImageNet) and search algorithms (DARTS, SNAS, RSPS, ProxylessNAS, OFA) demonstrate that it significantly outperforms its Few-Shot counterparts while surpassing previous comparable methods in terms of the accuracy of derived architectures.

  • 6 authors
·
Mar 28, 2022

Diversity-Aware Meta Visual Prompting

We present Diversity-Aware Meta Visual Prompting~(DAM-VP), an efficient and effective prompting method for transferring pre-trained models to downstream tasks with frozen backbone. A challenging issue in visual prompting is that image datasets sometimes have a large data diversity whereas a per-dataset generic prompt can hardly handle the complex distribution shift toward the original pretraining data distribution properly. To address this issue, we propose a dataset Diversity-Aware prompting strategy whose initialization is realized by a Meta-prompt. Specifically, we cluster the downstream dataset into small homogeneity subsets in a diversity-adaptive way, with each subset has its own prompt optimized separately. Such a divide-and-conquer design reduces the optimization difficulty greatly and significantly boosts the prompting performance. Furthermore, all the prompts are initialized with a meta-prompt, which is learned across several datasets. It is a bootstrapped paradigm, with the key observation that the prompting knowledge learned from previous datasets could help the prompt to converge faster and perform better on a new dataset. During inference, we dynamically select a proper prompt for each input, based on the feature distance between the input and each subset. Through extensive experiments, our DAM-VP demonstrates superior efficiency and effectiveness, clearly surpassing previous prompting methods in a series of downstream datasets for different pretraining models. Our code is available at: https://github.com/shikiw/DAM-VP.

  • 7 authors
·
Mar 14, 2023

TTS-VAR: A Test-Time Scaling Framework for Visual Auto-Regressive Generation

Scaling visual generation models is essential for real-world content creation, yet requires substantial training and computational expenses. Alternatively, test-time scaling has garnered growing attention due to resource efficiency and promising performance. In this work, we present TTS-VAR, the first general test-time scaling framework for visual auto-regressive (VAR) models, modeling the generation process as a path searching problem. To dynamically balance computational efficiency with exploration capacity, we first introduce an adaptive descending batch size schedule throughout the causal generation process. Besides, inspired by VAR's hierarchical coarse-to-fine multi-scale generation, our framework integrates two key components: (i) At coarse scales, we observe that generated tokens are hard for evaluation, possibly leading to erroneous acceptance of inferior samples or rejection of superior samples. Noticing that the coarse scales contain sufficient structural information, we propose clustering-based diversity search. It preserves structural variety through semantic feature clustering, enabling later selection on samples with higher potential. (ii) In fine scales, resampling-based potential selection prioritizes promising candidates using potential scores, which are defined as reward functions incorporating multi-scale generation history. Experiments on the powerful VAR model Infinity show a notable 8.7% GenEval score improvement (from 0.69 to 0.75). Key insights reveal that early-stage structural features effectively influence final quality, and resampling efficacy varies across generation scales. Code is available at https://github.com/ali-vilab/TTS-VAR.

  • 7 authors
·
Jul 24, 2025 2

Can We Recycle Our Old Models? An Empirical Evaluation of Model Selection Mechanisms for AIOps Solutions

AIOps (Artificial Intelligence for IT Operations) solutions leverage the tremendous amount of data produced during the operation of large-scale systems and machine learning models to assist software practitioners in their system operations. Existing AIOps solutions usually maintain AIOps models against concept drift through periodical retraining, despite leaving a pile of discarded historical models that may perform well on specific future data. Other prior works propose dynamically selecting models for prediction tasks from a set of candidate models to optimize the model performance. However, there is no prior work in the AIOps area that assesses the use of model selection mechanisms on historical models to improve model performance or robustness. To fill the gap, we evaluate several model selection mechanisms by assessing their capabilities in selecting the optimal AIOps models that were built in the past to make predictions for the target data. We performed a case study on three large-scale public operation datasets: two trace datasets from the cloud computing platforms of Google and Alibaba, and one disk stats dataset from the BackBlaze cloud storage data center. We observe that the model selection mechnisms utilizing temporal adjacency tend to have a better performance and can prevail the periodical retraining approach. Our findings also highlight a performance gap between existing model selection mechnisms and the theoretical upper bound which may motivate future researchers and practitioners in investigating more efficient and effective model selection mechanisms that fit in the context of AIOps.

  • 4 authors
·
May 5, 2025

Learning Query-Aware Budget-Tier Routing for Runtime Agent Memory

Memory is increasingly central to Large Language Model (LLM) agents operating beyond a single context window, yet most existing systems rely on offline, query-agnostic memory construction that can be inefficient and may discard query-critical information. Although runtime memory utilization is a natural alternative, prior work often incurs substantial overhead and offers limited explicit control over the performance-cost trade-off. In this work, we present BudgetMem, a runtime agent memory framework for explicit, query-aware performance-cost control. BudgetMem structures memory processing as a set of memory modules, each offered in three budget tiers (i.e., Low/Mid/High). A lightweight router performs budget-tier routing across modules to balance task performance and memory construction cost, which is implemented as a compact neural policy trained with reinforcement learning. Using BudgetMem as a unified testbed, we study three complementary strategies for realizing budget tiers: implementation (method complexity), reasoning (inference behavior), and capacity (module model size). Across LoCoMo, LongMemEval, and HotpotQA, BudgetMem surpasses strong baselines when performance is prioritized (i.e., high-budget setting), and delivers better accuracy-cost frontiers under tighter budgets. Moreover, our analysis disentangles the strengths and weaknesses of different tiering strategies, clarifying when each axis delivers the most favorable trade-offs under varying budget regimes.

Less Diverse, Less Safe: The Indirect But Pervasive Risk of Test-Time Scaling in Large Language Models

Test-Time Scaling (TTS) improves LLM reasoning by exploring multiple candidate responses and then operating over this set to find the best output. A tacit premise behind TTS is that sufficiently diverse candidate pools enhance reliability. In this work, we show that this assumption in TTS introduces a previously unrecognized failure mode. When candidate diversity is curtailed, even by a modest amount, TTS becomes much more likely to produce unsafe outputs. We present a reference-guided diversity reduction protocol (RefDiv) that serves as a diagnostic attack to stress test TTS pipelines. Through extensive experiments across open-source models (e.g. Qwen3, Mistral, Llama3.1, Gemma3) and two widely used TTS strategies (Monte Carlo Tree Search and Best-of-N), constraining diversity consistently signifies the rate at which TTS produces unsafe results. The effect is often stronger than that produced by prompts directly with high adversarial intent scores. This observed phenomenon also transfers across TTS strategies and to closed-source models (e.g. OpenAI o3-mini and Gemini-2.5-Pro), thus indicating that this is a general and extant property of TTS rather than a model-specific artifact. Additionally, we find that numerous widely used safety guardrail classifiers (e.g. Llama-Guard), are unable to flag the adversarial input prompts generated by RefDiv, demonstrating that existing defenses offer limited protection against this diversity-driven failure mode.

  • 4 authors
·
May 8

Structured Context Engineering for File-Native Agentic Systems: Evaluating Schema Accuracy, Format Effectiveness, and Multi-File Navigation at Scale

Large Language Model agents increasingly operate external systems through programmatic interfaces, yet practitioners lack empirical guidance on how to structure the context these agents consume. Using SQL generation as a proxy for programmatic agent operations, we present a systematic study of context engineering for structured data, comprising 9,649 experiments across 11 models, 4 formats (YAML, Markdown, JSON, Token-Oriented Object Notation [TOON]), and schemas ranging from 10 to 10,000 tables. Our findings challenge common assumptions. First, architecture choice is model-dependent: file-based context retrieval improves accuracy for frontier-tier models (Claude, GPT, Gemini; +2.7%, p=0.029) but shows mixed results for open source models (aggregate -7.7%, p<0.001), with deficits varying substantially by model. Second, format does not significantly affect aggregate accuracy (chi-squared=2.45, p=0.484), though individual models, particularly open source, exhibit format-specific sensitivities. Third, model capability is the dominant factor, with a 21 percentage point accuracy gap between frontier and open source tiers that dwarfs any format or architecture effect. Fourth, file-native agents scale to 10,000 tables through domain-partitioned schemas while maintaining high navigation accuracy. Fifth, file size does not predict runtime efficiency: compact or novel formats can incur a token overhead driven by grep output density and pattern unfamiliarity, with the magnitude depending on model capability. These findings provide practitioners with evidence-based guidance for deploying LLM agents on structured systems, demonstrating that architectural decisions should be tailored to model capability rather than assuming universal best practices.

  • 1 authors
·
Feb 5

X-Cross: Dynamic Integration of Language Models for Cross-Domain Sequential Recommendation

As new products are emerging daily, recommendation systems are required to quickly adapt to possible new domains without needing extensive retraining. This work presents ``X-Cross'' -- a novel cross-domain sequential-recommendation model that recommends products in new domains by integrating several domain-specific language models; each model is fine-tuned with low-rank adapters (LoRA). Given a recommendation prompt, operating layer by layer, X-Cross dynamically refines the representation of each source language model by integrating knowledge from all other models. These refined representations are propagated from one layer to the next, leveraging the activations from each domain adapter to ensure domain-specific nuances are preserved while enabling adaptability across domains. Using Amazon datasets for sequential recommendation, X-Cross achieves performance comparable to a model that is fine-tuned with LoRA, while using only 25% of the additional parameters. In cross-domain tasks, such as adapting from Toys domain to Tools, Electronics or Sports, X-Cross demonstrates robust performance, while requiring about 50%-75% less fine-tuning data than LoRA to make fine-tuning effective. Furthermore, X-Cross achieves significant improvement in accuracy over alternative cross-domain baselines. Overall, X-Cross enables scalable and adaptive cross-domain recommendations, reducing computational overhead and providing an efficient solution for data-constrained environments.

  • 5 authors
·
Apr 29, 2025 3

ModelLens: Finding the Best for Your Task from Myriads of Models

The open-source model ecosystem now contains hundreds of thousands of pretrained models, yet picking the best model for a new dataset is increasingly infeasible: new models and unbenchmarked datasets emerge continuously, leaving practitioners with no prior records on either side. Existing approaches handle only fragments of this in-the-wild setting: AutoML and transferability estimation select models from small predefined pools or require expensive per-model forward passes on the target dataset, while model routing presupposes a given candidate pool. We introduce ModelLens, a unified framework for model recommendation in the wild. Our key insight is that public leaderboard interactions, though scattered and noisy, collectively trace out an implicit atlas of model capabilities across heterogeneous evaluation settings, a signal rich enough to learn from directly. By learning a performance-aware latent space over model--dataset--metric tuples, ModelLens ranks unseen models on unseen datasets without running candidates on the target dataset. On a new benchmark of 1.62M evaluation records spanning 47K models and 9.6K datasets, ModelLens surpasses baselines that either rely on metadata alone or require running each candidate on the target dataset. Its recommended Top-K pools further improve multiple representative routing methods by up to 81% across diverse QA benchmarks. Case studies on recently released benchmarks further confirm generalization to both text and vision-language tasks.

ucdavis UC Davis
·
May 7 2

Synthesizing Multi-Agent Harnesses for Vulnerability Discovery

LLM agents have begun to find real security vulnerabilities that human auditors and automated fuzzers missed for decades, in source-available targets where the analyst can build and instrument the code. In practice the work is split among several agents, wired together by a harness: the program that fixes which roles exist, how they pass information, which tools each may call, and how retries are coordinated. When the language model is held fixed, changing only the harness can still change success rates by several-fold on public agent benchmarks, yet most harnesses are written by hand; recent harness optimizers each search only a narrow slice of the design space and rely on coarse pass/fail feedback that gives no diagnostic signal about why a trial failed. AgentFlow addresses both limitations with a typed graph DSL whose search space jointly covers agent roles, prompts, tools, communication topology, and coordination protocol, paired with a feedback-driven outer loop that reads runtime signals from the target program itself to diagnose which part of the harness caused the failure and rewrite it accordingly. We evaluate AgentFlow on TerminalBench-2 with Claude Opus 4.6 and on Google Chrome with Kimi K2.5. AgentFlow reaches 84.3% on TerminalBench-2, the highest score in the public leaderboard snapshot we evaluate against, and discovers ten previously unknown zero-day vulnerabilities in Google Chrome, including two Critical sandbox-escape vulnerabilities (CVE-2026-5280 and CVE-2026-6297).

  • 7 authors
·
Apr 21

T-VEC: A Telecom-Specific Vectorization Model with Enhanced Semantic Understanding via Deep Triplet Loss Fine-Tuning

The specialized vocabulary and complex concepts of the telecommunications industry present significant challenges for standard Natural Language Processing models. Generic text embeddings often fail to capture telecom-specific semantics, hindering downstream task performance. We introduce T-VEC (Telecom Vectorization Model), a novel embedding model tailored for the telecom domain through deep fine-tuning. Developed by NetoAI, T-VEC is created by adapting the state-of-the-art gte-Qwen2-1.5B-instruct model using a triplet loss objective on a meticulously curated, large-scale dataset of telecom-specific data. Crucially, this process involved substantial modification of weights across 338 layers of the base model, ensuring deep integration of domain knowledge, far exceeding superficial adaptation techniques. We quantify this deep change via weight difference analysis. A key contribution is the development and open-sourcing (MIT License) of the first dedicated telecom-specific tokenizer, enhancing the handling of industry jargon. T-VEC achieves a leading average MTEB score (0.825) compared to established models and demonstrates vastly superior performance (0.9380 vs. less than 0.07) on our internal telecom-specific triplet evaluation benchmark, indicating an exceptional grasp of domain-specific nuances, visually confirmed by improved embedding separation. This work positions NetoAI at the forefront of telecom AI innovation, providing the community with a powerful, deeply adapted, open-source tool.

  • 3 authors
·
Apr 23, 2025

Subset Selection Based On Multiple Rankings in the Presence of Bias: Effectiveness of Fairness Constraints for Multiwinner Voting Score Functions

We consider the problem of subset selection where one is given multiple rankings of items and the goal is to select the highest ``quality'' subset. Score functions from the multiwinner voting literature have been used to aggregate rankings into quality scores for subsets. We study this setting of subset selection problems when, in addition, rankings may contain systemic or unconscious biases toward a group of items. For a general model of input rankings and biases, we show that requiring the selected subset to satisfy group fairness constraints can improve the quality of the selection with respect to unbiased rankings. Importantly, we show that for fairness constraints to be effective, different multiwinner score functions may require a drastically different number of rankings: While for some functions, fairness constraints need an exponential number of rankings to recover a close-to-optimal solution, for others, this dependency is only polynomial. This result relies on a novel notion of ``smoothness'' of submodular functions in this setting that quantifies how well a function can ``correctly'' assess the quality of items in the presence of bias. The results in this paper can be used to guide the choice of multiwinner score functions for the subset selection setting considered here; we additionally provide a tool to empirically enable this.

  • 5 authors
·
Jun 16, 2023

Layerwise Recurrent Router for Mixture-of-Experts

The scaling of large language models (LLMs) has revolutionized their capabilities in various tasks, yet this growth must be matched with efficient computational strategies. The Mixture-of-Experts (MoE) architecture stands out for its ability to scale model size without significantly increasing training costs. Despite their advantages, current MoE models often display parameter inefficiency. For instance, a pre-trained MoE-based LLM with 52 billion parameters might perform comparably to a standard model with 6.7 billion parameters. Being a crucial part of MoE, current routers in different layers independently assign tokens without leveraging historical routing information, potentially leading to suboptimal token-expert combinations and the parameter inefficiency problem. To alleviate this issue, we introduce the Layerwise Recurrent Router for Mixture-of-Experts (RMoE). RMoE leverages a Gated Recurrent Unit (GRU) to establish dependencies between routing decisions across consecutive layers. Such layerwise recurrence can be efficiently parallelly computed for input tokens and introduces negotiable costs. Our extensive empirical evaluations demonstrate that RMoE-based language models consistently outperform a spectrum of baseline models. Furthermore, RMoE integrates a novel computation stage orthogonal to existing methods, allowing seamless compatibility with other MoE architectures. Our analyses attribute RMoE's gains to its effective cross-layer information sharing, which also improves expert selection and diversity. Our code is at https://github.com/qiuzh20/RMoE

  • 7 authors
·
Aug 13, 2024 2

MATES: Model-Aware Data Selection for Efficient Pretraining with Data Influence Models

Pretraining data selection has the potential to improve language model pretraining efficiency by utilizing higher-quality data from massive web data corpora. Current data selection methods, which rely on either hand-crafted rules or larger reference models, are conducted statically and do not capture the evolving data preferences during pretraining. In this paper, we introduce model-aware data selection with data influence models (MATES), where a data influence model continuously adapts to the evolving data preferences of the pretraining model and then selects the data most effective for the current pretraining progress. Specifically, we fine-tune a small data influence model to approximate oracle data preference signals collected by locally probing the pretraining model and to select data accordingly for the next pretraining stage. Experiments on Pythia and the C4 dataset demonstrate that MATES significantly outperforms random data selection on extensive downstream tasks in both zero- and few-shot settings. It doubles the gains achieved by recent data selection approaches that leverage larger reference models and reduces the total FLOPs required to reach certain performances by half. Further analysis validates the ever-changing data preferences of pretraining models and the effectiveness of our data influence models to capture them. Our code is open-sourced at https://github.com/cxcscmu/MATES.

  • 3 authors
·
Jun 10, 2024

LLM Swiss Round: Aggregating Multi-Benchmark Performance via Competitive Swiss-System Dynamics

The rapid proliferation of Large Language Models (LLMs) and diverse specialized benchmarks necessitates a shift from fragmented, task-specific metrics to a holistic, competitive ranking system that effectively aggregates performance across multiple ability dimensions. Primarily using static scoring, current evaluation methods are fundamentally limited. They struggle to determine the proper mix ratio across diverse benchmarks, and critically, they fail to capture a model's dynamic competitive fitness or its vulnerability when confronted with sequential, high-stakes tasks. To address this, we introduce the novel Competitive Swiss-System Dynamics (CSD) framework. CSD simulates a multi-round, sequential contest where models are dynamically paired across a curated sequence of benchmarks based on their accumulated win-loss record. And Monte Carlo Simulation (N=100,000 iterations) is used to approximate the statistically robust Expected Win Score (E[S_m]), which eliminates the noise of random pairing and early-round luck. Furthermore, we implement a Failure Sensitivity Analysis by parameterizing the per-round elimination quantity (T_k), which allows us to profile models based on their risk appetite--distinguishing between robust generalists and aggressive specialists. We demonstrate that CSD provides a more nuanced and context-aware ranking than traditional aggregate scoring and static pairwise models, representing a vital step towards risk-informed, next-generation LLM evaluation.

ByteDance-Seed ByteDance Seed
·
Dec 24, 2025 2

MoE++: Accelerating Mixture-of-Experts Methods with Zero-Computation Experts

In this work, we aim to simultaneously enhance the effectiveness and efficiency of Mixture-of-Experts (MoE) methods. To achieve this, we propose MoE++, a general and heterogeneous MoE framework that integrates both Feed-Forward Network~(FFN) and zero-computation experts. Specifically, we introduce three types of zero-computation experts: the zero expert, copy expert, and constant expert, which correspond to discard, skip, and replace operations, respectively. This design offers three key advantages: (i) Low Computing Overhead: Unlike the uniform mixing mechanism for all tokens within vanilla MoE, MoE++ allows each token to engage with a dynamic number of FFNs, be adjusted by constant vectors, or even skip the MoE layer entirely. (ii) High Performance: By enabling simple tokens to utilize fewer FFN experts, MoE++ allows more experts to focus on challenging tokens, thereby unlocking greater performance potential than vanilla MoE. (iii) Deployment Friendly: Given that zero-computation experts have negligible parameters, we can deploy all zero-computation experts on each GPU, eliminating the significant communication overhead and expert load imbalance associated with FFN experts distributed across different GPUs. Moreover, we leverage gating residuals, enabling each token to consider the pathway taken in the previous layer when selecting the appropriate experts. Extensive experimental results demonstrate that MoE++ achieves better performance while delivering 1.1-2.1x expert forward throughput compared to a vanilla MoE model of the same size, which lays a solid foundation for developing advanced and efficient MoE-related models.

  • 4 authors
·
Oct 9, 2024