Daily Papers

Forced alignment estimates the timestamps of each word, phone or character in speech given its transcript. Published comparisons normalize transcripts, split the data and match boundaries differently, so their numbers cannot be read together. We present FA-Bench, an open framework that fixes those choices once and releases the code, splits, phone mapping, text normalization and scoring script, with results published periodically. Track 1 gives every aligner the reference transcript and Track 2 gives it a recognizer's output, on the same audio, clean and degraded four ways, with 21 open models and 9 commercial APIs under a unified protocol. We score every boundary of an utterance and check the two labels beside it, so a word the recognizer missed or invented is charged. Using a tolerance-based F1 as our primary metric eliminates the 9% to 14% score inflation that standard MAE causes on recognition-dependent systems in conversational speech. We then group boundaries by position and how many adjacent words were recognized correctly, which shows where a system lost the score. We discovered systematic bias in how current systems time words, with Whisper about 150 ms early and several commercial ASR APIs over 50 ms late. Code and results are at https://github.com/olewave/fa-bench

Autonomous racing serves as a compelling testbed for advancing autonomous vehicle systems. The 1/10-scale F1Tenth platform is widely adopted for education and research, with annual competitions held worldwide. Yet, leading solutions in these tournaments remain dominated by rule-based approaches. While learning-based methods have been proposed, they focus primarily on single-vehicle settings, leaving challenging multi-vehicle interactions largely unexplored. To address this gap, we introduce End2Race, an end-to-end learning framework designed for head-to-head autonomous racing. Using this framework, we develop a computationally efficient policy network that achieves an inference latency below 1 ms on an F1Tenth onboard computer. Extensive evaluations show that the policy generalizes to both novel tracks and unseen opponent behaviors, demonstrating high racing speeds, robust safety, and adaptive overtaking maneuvers. These results substantially outperform both prior learning-based methods and rule-based baselines. Codebase is available at https://github.com/michigan-traffic-lab/End2Race.

AI systems can now write and optimize production GPU kernels, but validating them remains an important challenge. Evaluating the kernel on a few random inputs and checking that its outputs match a trusted reference kernel within numeric tolerances is not sufficient: races can cause nondeterministic behavior that fails to manifest in tests, and numeric tolerances can hide bugs and cause false positives even after extensive calibration. To address this challenge, we present RESOLVE, which combines testing and formal verification to build a comprehensive kernel validation pipeline. It operates in three steps: First, it tests for nondeterminism using binary instrumentation that perturbs execution timing to expose races. Second, an agent rewrites the candidate and reference kernels to obtain "reduced-concurrency" versions that are simpler to analyze but still produce bitwise-identical outputs in all tests. Third, the reduced kernels are formally analyzed in the F*/Pulse framework and prove that they perform the same computation on real numbers. This sidesteps the need for numeric tolerances. We show that RESOLVE can validate a broad selection of kernels using KernelBench, and prove equivalence across fused GEMMs in three state-of-the-art frameworks and languages: CUTLASS, Triton, and Gluon. It also analyzes mega-kernels, notoriously difficult to validate, and finds four previously unreported issues, including two clear bugs. We show that agents can use RESOLVE to repair the issues, with minimal performance impact, highlighting that agents can optimize aggressively when they can rigorously check their results.

Ensuring the safety of LLM-generated content is essential for real-world deployment. Most existing guardrail models formulate moderation as a fixed binary classification task, implicitly assuming a fixed definition of harmfulness. In practice, enforcement strictness - how conservatively harmfulness is defined and enforced - varies across platforms and evolves over time, making binary moderators brittle under shifting requirements. We first introduce FlexBench, a strictness-adaptive LLM moderation benchmark that enables controlled evaluation under multiple strictness regimes. Experiments on FlexBench reveal substantial cross-strictness inconsistency in existing moderators: models that perform well under one regime can degrade substantially under others, limiting their practical usability. To address this, we propose FlexGuard, an LLM-based moderator that outputs a calibrated continuous risk score reflecting risk severity and supports strictness-specific decisions via thresholding. We train FlexGuard via risk-alignment optimization to improve score-severity consistency and provide practical threshold selection strategies to adapt to target strictness at deployment. Experiments on FlexBench and public benchmarks demonstrate that FlexGuard achieves higher moderation accuracy and substantially improved robustness under varying strictness. We release the source code and data to support reproducibility.

Benchmarks for LLM-generated GPU kernels decide correctness with a few random inputs and a loose floating-point tolerance, and their verdicts now feed leaderboards and reinforcement-learning rewards. Recent work agrees these checkers are weak and patches them by hand---extra input distributions, fuzzing recipes, tighter tolerances---with no way to measure whether any patch suffices. We introduce mutation analysis as an adequacy metric for kernel-benchmark oracles: deterministic rules inject 10{,}303 compilable faults into verified CUDA implementations of 188 KernelBench problems, 7{,}384 of them with an independent kill witness; any test protocol is scored by the fraction it detects. The official check misses one in six witnessed faults (16.9%), deterministically, and the misses are skewed by family: 8.7% of arithmetic faults escape, but 78.6% of precision faults do. The metric explains why (a tolerance blind band growing with reduction size; a measured ceiling on input aggressiveness set by legitimate floating-point variance), audits the strongest existing patch (KernelBench-Verified's gain splits into +4.0 points from hidden inputs and +4.5 from tighter tolerance, a split its authors could not compute), and exposes a published fuzzing recipe that rejects correct kernels 107 times. Optimizing suites over the kill matrix reaches 98.0% detection with two inputs per problem (94.8% held-out), and the measurement's fault taxonomy teaches a test generator more than the raw faults themselves. Across 48 whole architectures, the blindness grows with scale, concentrating in deep homogeneous pipelines, and two problems prove unrefereeable: their official references violate the benchmark's own tolerance against fp64. We release everything as https://huggingface.co/datasets/Elfsong/KernelBench-M{KernelBench-M}.

To enhance the safety of VLMs, this paper introduces a novel reasoning-based VLM guard model dubbed GuardReasoner-VL. The core idea is to incentivize the guard model to deliberatively reason before making moderation decisions via online RL. First, we construct GuardReasoner-VLTrain, a reasoning corpus with 123K samples and 631K reasoning steps, spanning text, image, and text-image inputs. Then, based on it, we cold-start our model's reasoning ability via SFT. In addition, we further enhance reasoning regarding moderation through online RL. Concretely, to enhance diversity and difficulty of samples, we conduct rejection sampling followed by data augmentation via the proposed safety-aware data concatenation. Besides, we use a dynamic clipping parameter to encourage exploration in early stages and exploitation in later stages. To balance performance and token efficiency, we design a length-aware safety reward that integrates accuracy, format, and token cost. Extensive experiments demonstrate the superiority of our model. Remarkably, it surpasses the runner-up by 19.27% F1 score on average. We release data, code, and models (3B/7B) of GuardReasoner-VL at https://github.com/yueliu1999/GuardReasoner-VL/

Mathematical programming formulations are routinely modified through algebraic reformulations, perturbations of constraint functions, and the addition or removal of constraints. Some of these modifications preserve the feasible set, whereas others reflect newly imposed modeling requirements and therefore change the optimization problem itself. This paper develops a metric framework for quantifying the robustness of formulation-dependent properties. Formulations are modeled as typed collections of constraint functions. Within each fixed typed-cardinality class, their distance is defined by optimally matching constraints of the same type and measuring the resulting discrepancies in a norm on the underlying function space. As a concrete demonstration of the framework, we study the Linear Independence Constraint Qualification (LICQ). We introduce the pointwise LICQ radius, defined as the distance from a feasible formulation to the set of formulations that remain feasible at a prescribed point but fail LICQ there. Under suitable assumptions, we derive an explicit formula for this radius and characterize the effect of adding a single equality or inequality constraint.

Modern Lean theorem provers achieve strong performance only with substantial training and inference compute, driven in part by scarce verified proof data and the long reasoning traces of formal proof search, making both supervised fine-tuning (SFT) and sampling expensive. We introduce Pythagoras-Prover, a compute-efficient open-source family of Lean theorem provers built for practical compute budgets. The family spans two generation paradigms: autoregressive models at 4B and 32B parameters, and a first proof-of-concept diffusion-based prover (4B) that iteratively refines Lean proofs at inference time. For training efficiency, we build a Lean-verified corpus stratified into easy, medium, and hard problems for curriculum SFT, so models acquire proof skills progressively from shorter, simpler proofs to longer, harder ones. During SFT, a dynamic proof-reasoning filtering scheme preserves informative proof traces while keeping each instance within an 8k-token context budget. We also introduce Augmented Lean Formalisation (ALF), which expands scarce verified corpora into variants of formal statements, populated via self-distillation for extra training signal without formally verifying every mutated instance. By perturbing known problems while preserving their formal character, ALF reduces reliance on any statement's surface form. Empirically, Pythagoras-Prover-4B surpasses DeepSeek-Prover-V2-671B at pass@32 on MiniF2F-Test (86.1% vs 82.4%) with ~167x fewer parameters, while Pythagoras-Prover-32B sets the open-source state of the art at 93.0% on MiniF2F-Test and solves 93 of 672 PutnamBench problems. We release MiniF2F-ALF, an ALF-mutated contamination-sensitive benchmark on which every evaluated model loses accuracy; here our 32B remains strongest and our 4B matches the prior state of the art, Goedel-Prover-V2-32B.

Modern automobiles have evolved from just being mechanical machines to having full-fledged electronics systems that enhance vehicle dynamics and driver experience. However, these complex hardware and software systems, if not properly designed, can experience failures that can compromise the safety of the vehicle, its occupants, and the surrounding environment. For example, a system to activate the brakes to avoid a collision saves lives when it functions properly, but could lead to tragic outcomes if the brakes were applied in a way that's inconsistent with the design. Broadly speaking, the analysis performed to minimize such risks falls into a systems engineering domain called Functional Safety. In this paper, we present SafetyLens, a visual data analysis tool to assist engineers and analysts in analyzing automotive Functional Safety datasets. SafetyLens combines techniques including network exploration and visual comparison to help analysts perform domain-specific tasks. This paper presents the design study with domain experts that resulted in the design guidelines, the tool, and user feedback.

Neural networks require a careful design in order to perform properly on a given task. In particular, selecting a good activation function (possibly in a data-dependent fashion) is a crucial step, which remains an open problem in the research community. Despite a large amount of investigations, most current implementations simply select one fixed function from a small set of candidates, which is not adapted during training, and is shared among all neurons throughout the different layers. However, neither two of these assumptions can be supposed optimal in practice. In this paper, we present a principled way to have data-dependent adaptation of the activation functions, which is performed independently for each neuron. This is achieved by leveraging over past and present advances on cubic spline interpolation, allowing for local adaptation of the functions around their regions of use. The resulting algorithm is relatively cheap to implement, and overfitting is counterbalanced by the inclusion of a novel damping criterion, which penalizes unwanted oscillations from a predefined shape. Experimental results validate the proposal over two well-known benchmarks.

Alignment tuning is meant to make harmful-request refusal robust, yet this safety behavior can be erased by a small set of benign fine-tuning examples. This is a deployment risk for open-weight models because a checkpoint can pass refusal tests at release time and later lose refusal under low-cost downstream fine-tuning. Prior work has established these refusal failures, but existing studies do not show how to detect this fragility in the aligned model itself before an attack or fine-tuning intervention is run. We introduce Skin-Deep, a geometric diagnostic that detects alignment fragility directly from the aligned model's hidden-state activations before such an intervention is run and compresses the layer-wise safety geometry into a single scalar, the Geometric Fragility Score (GFS). Applied to twenty-one instruction-tuned models spanning six alignment recipes and 3B--32B parameters, Skin-Deep reveals a recurring low-rank safety subspace across model families. Direction ablations show that removing directions in this subspace weakens harmful-request refusal, providing causal evidence that the recovered geometry underlies refusal behavior. Crucially, GFS identifies, before any fine-tuning, the initially safe model that retains the most refusal after small-scale LoRA fine-tuning. These results establish GFS as a practical pre-deployment diagnostic for flagging fragile refusal behavior without running an attack.

Image guardrails are typically trained and evaluated under a fixed safety policy, implicitly treating safety as an intrinsic property of an image. Real deployments are different: the same image may be allowed in one product, restricted in another, and newly disallowed when a policy boundary changes. We study policy-adaptive image guardrailing, where a model must decide whether an image violates the currently supplied policy and generalize to held-out policy definitions. We introduce PolicyShiftBench, a comprehensive benchmark with 2,000 policy-discriminative instances over 265 images, where each image is paired with 7.55 policy-conditioned prompts on average to test whether models adapt to the active policy rather than relying on image-level safety priors. We then propose PolicyShiftGuard, a compact policy-conditioned guardrail trained with a two-stage training recipe that combines Randomized Policy SFT (RP-SFT) with Boundary-Pair Policy Adaptation (BP-Adapt). BP-Adapt trains matched prompts for the same image and risk category using standard label supervision and a pairwise comparison loss that separates blocking policies from passing policies. Experiments show that existing VLMs and specialized guardrails remain brittle under policy shifts, while PolicyShiftGuard substantially improves policy-sensitive performance. The 7B model achieves SOTA performance of 76.9 Avg. F1 and 72.1 Avg. PSS on PolicyShiftBench, transfers well to UnSafeBench and SafeEditBench, and improves the latency-performance trade-off with a concise output format. Ablations confirm that matched pass/block boundary pairs are essential for stable policy adaptation.

The advent of Federated Learning (FL) highlights the practical necessity for the right to be forgotten for all clients, allowing them to request data deletion from the machine learning models service provider. This necessity has spurred a growing demand for Federated Unlearning (FU). Feature unlearning has gained considerable attention due to its applications in unlearning sensitive, backdoor, and biased features. Existing methods employ the influence function to achieve feature unlearning, which is impractical for FL as it necessitates the participation of other clients, if not all, in the unlearning process. Furthermore, current research lacks an evaluation of the effectiveness of feature unlearning. To address these limitations, we define feature sensitivity in evaluating feature unlearning according to Lipschitz continuity. This metric characterizes the model outputs rate of change or sensitivity to perturbations in the input feature. We then propose an effective federated feature unlearning framework called Ferrari, which minimizes feature sensitivity. Extensive experimental results and theoretical analysis demonstrate the effectiveness of Ferrari across various feature unlearning scenarios, including sensitive, backdoor, and biased features. The code is publicly available at https://github.com/OngWinKent/Federated-Feature-Unlearning

Most vehicle predictive maintenance systems rely exclusively on internal diagnostic signals and are validated on deterministic synthetic data, limiting the credibility of reported metrics. This paper presents a simulation-validated proof-of-concept framework for V2X-augmented predictive maintenance, integrating on-board sensor streams with external contextual signals -- road quality, weather, traffic density, and driver behaviour -- acquired via V2X communication and third-party APIs, with inference at the vehicle edge. Field validation on instrumented vehicles is identified as the required next step. Three experiments address common shortcomings of prior work. A feature group ablation study shows that V2X contextual features contribute a 2.6-point F1 gain, with full context removal reducing macro F1 from 0.855 to 0.807. On the AI4I 2020 real-world industrial failure dataset (10,000 samples, five failure modes), LightGBM achieves AUC-ROC of 0.973 under 5-fold stratified CV with SMOTE confined to training folds. A noise sensitivity analysis shows macro F1 remains above 0.88 under low noise and degrades to 0.74 under very high noise. SHAP analysis confirms that V2X and engineered interaction features rank among the top 15 predictors. Edge inference is estimated to reduce latency from 3.5s to under 1.0s versus cloud-only processing.

Benchmark infrastructure for personally identifiable information (PII) detection remains limited: existing corpora cover few entity types, use ad hoc generation conditions, and do not show which surface conditions cause detector failures. We present REDACT, a systematically controlled multilingual PII benchmark with 13,427 records, 324,078 entity annotations, 51 entity types, 4,127 surface-form patterns, and 25 languages across 9 scripts. A strength-2 covering-array sampler controls nine generation axes: domain, format, difficulty, length, density, code-switching, language, adjacency, and co-occurrence. Three entity-level metadata fields (disclosure status, disclosure form, and a GDPR-aligned sensitivity tier) enable stratified evaluation beyond aggregate or per-type F1. From the full benchmark, we evaluate five detectors (Presidio, GLiNER, the OpenAI Privacy Filter, GPT-4.1, and Claude Sonnet 4.6) on a locked, language-stratified sample of 1,000 records. Aggregate F1 masks an architecture-dependent failure structure: the rule-based detector performs poorly on the highest-stakes data, including HIGH-sensitivity categories (recall 0.07) and non-verbatim disclosure forms, while the LLM detectors remain more robust, with the HIGH tier as their strongest sensitivity slice. A three-model reference-free LLM-as-judge assessment corroborates that sensitivity-tier assignment is the task's hardest axis. We release the benchmark, schema, prompts, and stratified evaluation harness.

Generating high-fidelity 3D geometries under explicit parameter constraints is central to engineering design, yet current methods often require large datasets and fail to provide reliable control beyond the training distribution. We introduce LAMP, a data-efficient framework for controllable and interpretable 3D generation that aligns signed distance function (SDF) decoders by overfitting each exemplar from a shared initialization, then generates new designs by solving a parameter-constrained affine mixing problem in the aligned weight space. To improve reliability, we propose a linearity-mismatch safety metric that detects when mixed decoders leave the valid local regime. We evaluate LAMP on DrivAerNet++, BlendedNet, and additional industry-level vehicle families, including sports cars, SUVs, and convertibles. LAMP enables controlled interpolation with as few as 50 samples, safe extrapolation up to 100% beyond training ranges, and performance-guided optimization under fixed parameters, outperforming conditional autoencoder and Deep Network Interpolation (DNI) baselines in extrapolation, data efficiency, and parameter fidelity. Our results demonstrate that LAMP advances controllable, data-efficient, and safe 3D generation for design exploration, dataset generation, and performance-driven optimization.

Feedforward steering control is a key component of hierarchical control architectures for autonomous racing. The goal is to reduce steering corrections from the feedback controllers by predicting the vehicle's inverse lateral dynamics. This paper presents a systematic benchmark of two learning-based and two empirical (analytical) feedforward steering controllers. We introduce a new ehd formulation based on a polynomial surface fit that captures velocity-dependent nonlinear steering behavior with minimal parametrization. We test the feedforward controllers in a high-fidelity simulation framework based on the real-world Abu Dhabi Autonomous Racing League competition, using a high-fidelity double-track vehicle dynamics simulator. Open-loop evaluation shows that the learning-based controllers achieve the lowest prediction errors; however, closed-loop testing reveals that this improved accuracy does not translate into superior path tracking performance or lap times, even after iterative fine-tuning. In contrast, the proposed EHD approach achieves the best overall closed-loop robustness and lap time, highlighting the necessity of evaluating feedforward strategies within the complete trajectory planning and control software stack. Our code is available at https://github.com/TUMRT/steering_ff_control.

How do multi-turn reasoning systems fail? The expected answer is logical contradiction, in which the system's maintained state becomes unsatisfiable. We show that the dominant mode is instead satisfiable drift, where the internal state stays consistent while the returned answer silently violates prior commitments. We build DRIFT-Bench (Decomposing Reasoning Into Failure Types), a solver-instrumented benchmark of 816 test problems across three constraint domains, and evaluate four methods on it across four open-weight models (8B-120B parameters). MUS-Repair, which feeds minimal unsatisfiable subsets back to the generator, is strongest in every setting (+1.8 to +15.0 pp over the best non-MUS baseline). But the central finding is what repair leaves behind. After structured feedback, models rarely contradict themselves. They forget. Residual errors are 98-100% satisfiable drift across all settings, while contradiction drops to near zero. Reliable multi-turn systems must separately validate that the returned answer respects the maintained state. Code is available at https://github.com/kaons-research/drift-bench.

Mixed integer linear programs are commonly solved by Branch and Bound algorithms. A key factor of the efficiency of the most successful commercial solvers is their fine-tuned heuristics. In this paper, we leverage patterns in real-world instances to learn from scratch a new branching strategy optimised for a given problem and compare it with a commercial solver. We propose FMSTS, a novel Reinforcement Learning approach specifically designed for this task. The strength of our method lies in the consistency between a local value function and a global metric of interest. In addition, we provide insights for adapting known RL techniques to the Branch and Bound setting, and present a new neural network architecture inspired from the literature. To our knowledge, it is the first time Reinforcement Learning has been used to fully optimise the branching strategy. Computational experiments show that our method is appropriate and able to generalise well to new instances.

Proof-oriented programs mix computational content with proofs of program correctness. However, the human effort involved in programming and proving is still substantial, despite the use of Satisfiability Modulo Theories (SMT) solvers to automate proofs in languages such as F*. Seeking to spur research on using AI to automate the construction of proof-oriented programs, we curate a dataset of 600K lines of open-source F* programs and proofs, including software used in production systems ranging from Windows and Linux, to Python and Firefox. Our dataset includes around 32K top-level F* definitions, each representing a type-directed program and proof synthesis problem -- producing a definition given a formal specification expressed as an F* type. We provide a program-fragment checker that queries F* to check the correctness of candidate solutions. We believe this is the largest corpus of SMT-assisted program proofs coupled with a reproducible program-fragment checker. Grounded in this dataset, we investigate the use of AI to synthesize programs and their proofs in F*, with promising results. Our main finding in that the performance of fine-tuned smaller language models (such as Phi-2 or StarCoder) compare favorably with large language models (such as GPT-4), at a much lower computational cost. We also identify various type-based retrieval augmentation techniques and find that they boost performance significantly. With detailed error analysis and case studies, we identify potential strengths and weaknesses of models and techniques and suggest directions for future improvements.

Reinforcement learning (RL) fine-tuning of large language models (LLMs) often suffers from instability due to the numerical mismatch between the training and inference policies. While prior work has attempted to mitigate this issue through algorithmic corrections or engineering alignments, we show that its root cause lies in the floating point precision itself. The widely adopted BF16, despite its large dynamic range, introduces large rounding errors that breaks the consistency between training and inference. In this work, we demonstrate that simply reverting to FP16 effectively eliminates this mismatch. The change is simple, fully supported by modern frameworks with only a few lines of code change, and requires no modification to the model architecture or learning algorithm. Our results suggest that using FP16 uniformly yields more stable optimization, faster convergence, and stronger performance across diverse tasks, algorithms and frameworks. We hope these findings motivate a broader reconsideration of precision trade-offs in RL fine-tuning.

Effective reward design is a central challenge in Reinforcement Learning (RL) for code generation. Mainstream pass/fail outcome rewards enforce functional correctness via executing unit tests, but the resulting sparsity limits potential performance gains. While recent work has explored external Reward Models (RM) to generate richer, continuous rewards, the learned RMs suffer from reward misalignment and prohibitive computational cost. In this paper, we introduce VeRPO (Verifiable Dense Reward Policy Optimization), a novel RL framework for code generation that synthesizes robust and dense rewards fully grounded in verifiable execution feedback. The core idea of VeRPO is constructing dense rewards from weighted partial success: by dynamically estimating the difficulty weight of each unit test based on the execution statistics during training, a dense reward is derived from the sum of weights of the passed unit tests. To solidify the consistency between partial success and end-to-end functional correctness, VeRPO further integrates the dense signal with global execution outcomes, establishing a robust and dense reward paradigm relying solely on verifiable execution feedback. Extensive experiments across diverse benchmarks and settings demonstrate that VeRPO consistently outperforms outcome-driven and RM-based baselines, achieving up to +8.83\% gain in pass@1 with negligible time cost (< 0.02\%) and zero GPU memory overhead.

The rapid adaptation of data driven AI models, such as deep learning inference, training, Vision Transformers (ViTs), and other HPC applications, drives a strong need for runtime precision configurable different non linear activation functions (AF) hardware support. Existing solutions support diverse precision or runtime AF reconfigurability but fail to address both simultaneously. This work proposes a flexible and SIMD multiprecision processing element (FlexPE), which supports diverse runtime configurable AFs, including sigmoid, tanh, ReLU and softmax, and MAC operation. The proposed design achieves an improved throughput of up to 16X FxP4, 8X FxP8, 4X FxP16 and 1X FxP32 in pipeline mode with 100% time multiplexed hardware. This work proposes an area efficient multiprecision iterative mode in the SIMD systolic arrays for edge AI use cases. The design delivers superior performance with up to 62X and 371X reductions in DMA reads for input feature maps and weight filters in VGG16, with an energy efficiency of 8.42 GOPS / W within the accuracy loss of 2%. The proposed architecture supports emerging 4-bit computations for DL inference while enhancing throughput in FxP8/16 modes for transformers and other HPC applications. The proposed approach enables future energy-efficient AI accelerators in edge and cloud environments.

Automated evaluation of tool-using large language model (LLM) agents is widely assumed to be reliable, but this assumption has rarely been validated against human annotation. We introduce AgentProp-Bench, a 2,000-task benchmark with 2,300 traces across four domains, nine production LLMs, and a 100-label human-validated subset. We quantify judge reliability, characterize error propagation, and evaluate a runtime mitigation. Substring-based judging agrees with human annotation at kappa=0.049 (chance-level); a three-LLM ensemble reaches kappa=0.432 (moderate) with a conservative bias. Under validated evaluation, a parameter-level injection propagates to a wrong final answer with human-calibrated probability approximately 0.62 (range 0.46-0.73 across models). Rejection (catching bad parameters) and recovery (correcting after acceptance) are independent model capabilities (Spearman rho=0.126, p=0.747). A tuned runtime interceptor reduces hallucination on GPT-4o-mini by 23.0 percentage points under a concurrent n=600 control, but shows no significant effect on Gemini-2.0-Flash, whose aggressive parameter rejection eliminates the target failure mode. All code, data, traces, and human labels are released at https://github.com/bhaskargurram-ai/agenthallu-bench.

Current safety alignment of foundation models largely follows a one-size-fits-all paradigm, applying the same refusal policy across users and contexts. As a result, models may refuse requests that are unsafe for general users but legitimate for authorized professionals, limiting helpfulness in specialized professional settings. Existing approaches either require costly realignment or rely on inference-time steering that suffers from imprecise control and added latency. To this end, we propose Palette, a modular, controllable, and efficient framework that selectively relaxes refusal behavior on authorized target domains while preserving standard safety elsewhere. Our method identifies a refusal direction via multi-objective search and internalizes it into the model through lightweight adaptation. Palette further supports modular composition: it learns domain-specific safety controls independently and composes them through parameter merging, enabling on-demand multi-domain authorization without retraining. Experiments across four safety benchmarks, multiple model variants, and both LLMs and VLMs show that Palette delivers precise safety control without sacrificing general utility, offering a practical path toward foundation models that adapt to diverse professional needs.

Benchmarks for LLM-generated GPU kernels (KernelBench, TritonBench, GEAK) score correctness through fixed-shape, small-sample allclose-style checks. The number of inputs varies between benchmarks. The shape, dtype, and tolerance are fixed for each kernel. We test that oracle empirically. We construct a controlled corpus of 24 Triton and CPU stand-in kernels (15 correct controls and 9 LLM-style buggy variants seeded with documented transcription errors) and re-evaluate it under op-schema-aware seeded fuzzing with a high-precision (fp64) CPU reference and per-(op, dtype) absolute tolerances. The seeded oracle flags 9 of 9 buggy kernels and passes 15 of 15 correct controls, at zero precision cost on controls. We extend the corpus to 26 ops (adding a flash-attention pair) and re-run the same protocol on five GPU classes (RTX 3060, A10, L40S, A100 SXM4, H100 NVL). The verdicts are identical across all five GPUs: 10 of 10 illusions caught and 16 of 16 controls clean. The corpus result is about LLM-style transcription bugs that the allclose-on-one-shape oracle certifies as correct, not about the bug rate of any specific deployed LLM. Every flagged failure replays byte-for-byte from a stored seed.

Automated Theorem Proving (ATP) faces challenges due to its complexity and computational demands. Recent work has explored using Large Language Models (LLMs) for ATP action selection, but these methods can be resource-intensive. This study introduces FEAS, an agent that enhances the COPRA in-context learning framework within Lean. FEAS refines prompt generation, response parsing, and incorporates domain-specific heuristics for functional equations. It introduces FunEq, a curated dataset of functional equation problems with varying difficulty. FEAS outperforms baselines on FunEq, particularly with the integration of domain-specific heuristics. The results demonstrate FEAS's effectiveness in generating and formalizing high-level proof strategies into Lean proofs, showcasing the potential of tailored approaches for specific ATP challenges.

Recent advancements in large language models (LLMs) have spurred growing interest in automatic theorem proving using Lean4, where effective tree search methods are crucial for navigating proof search spaces. While the existing approaches primarily rely on value functions and Monte Carlo Tree Search (MCTS), the potential of simpler methods like Best-First Search (BFS) remains underexplored. This paper investigates whether BFS can achieve competitive performance in large-scale theorem proving tasks. We present BFS-Prover, a scalable expert iteration framework, featuring three key innovations. First, we implement strategic data filtering at each expert iteration round, excluding problems solvable via beam search node expansion to focus on harder cases. Second, we improve the sample efficiency of BFS through Direct Preference Optimization (DPO) applied to state-tactic pairs automatically annotated with compiler error feedback, refining the LLM's policy to prioritize productive expansions. Third, we employ length normalization in BFS to encourage exploration of deeper proof paths. BFS-Prover achieves a score of 71.31 on the MiniF2F test set and therefore challenges the perceived necessity of complex tree search methods, demonstrating that BFS can achieve competitive performance when properly scaled.

The rapid proliferation of Large Language Models (LLMs) and diverse specialized benchmarks necessitates a shift from fragmented, task-specific metrics to a holistic, competitive ranking system that effectively aggregates performance across multiple ability dimensions. Primarily using static scoring, current evaluation methods are fundamentally limited. They struggle to determine the proper mix ratio across diverse benchmarks, and critically, they fail to capture a model's dynamic competitive fitness or its vulnerability when confronted with sequential, high-stakes tasks. To address this, we introduce the novel Competitive Swiss-System Dynamics (CSD) framework. CSD simulates a multi-round, sequential contest where models are dynamically paired across a curated sequence of benchmarks based on their accumulated win-loss record. And Monte Carlo Simulation (N=100,000 iterations) is used to approximate the statistically robust Expected Win Score (E[S_m]), which eliminates the noise of random pairing and early-round luck. Furthermore, we implement a Failure Sensitivity Analysis by parameterizing the per-round elimination quantity (T_k), which allows us to profile models based on their risk appetite--distinguishing between robust generalists and aggressive specialists. We demonstrate that CSD provides a more nuanced and context-aware ranking than traditional aggregate scoring and static pairwise models, representing a vital step towards risk-informed, next-generation LLM evaluation.

The inherent rigidity of fixed-size benchmarks makes them an inefficient tool for model evaluation. Diverse evaluation objectives, including model ranking, model selection and testing throughout development, demand varying levels of statistical power. The mismatch between fixed sample sizes and these diverse needs results in either excessive computational cost or compromised reliability - a critical concern for model evaluation. To overcome these limitations, we call for adoption of sequential testing in our field. We provide an adaptive evaluation framework, that provides a principled way to navigate the trade-off between efficiency and reliability in model evaluation. Our framework combines the established statistical paradigm of sequential testing with stopping criteria tailored to common evaluation needs such as diminishing returns detection, and minimum detectable effect size. We demonstrate its ability to adaptively manage the efficiency-reliability trade-off on the Open VLM Leaderboard, including, for example, a 80% reduction in computational cost compared to fixed-size evaluation (with a 2.5-point CI width allowance) while maintaining statistical significance.

We extend conformal prediction to control the expected value of any monotone loss function. The algorithm generalizes split conformal prediction together with its coverage guarantee. Like conformal prediction, the conformal risk control procedure is tight up to an O(1/n) factor. We also introduce extensions of the idea to distribution shift, quantile risk control, multiple and adversarial risk control, and expectations of U-statistics. Worked examples from computer vision and natural language processing demonstrate the usage of our algorithm to bound the false negative rate, graph distance, and token-level F1-score.

Convex analysis is a modern branch of mathematics with many applications. As Large Language Models (LLMs) start to automate research-level math and sciences, it is important for LLMs to demonstrate the ability to understand and reason with convexity. We introduce \cb, a scalable and mechanically verifiable benchmark for testing whether LLMs can identify the convexity of a symbolic objective under deep functional composition. Experiments on frontier LLMs reveal a sharp compositional reasoning gap: performance degrades rapidly with increasing depth, dropping from an F1-score of 1.0 at depth 2 to approximately 0.2 at depth 100. Inspection of models' reasoning traces indicates two failure modes: parsing failure and lazy reasoning. To address these limitations, we propose an agentic divide-and-conquer framework that (i) offloads parsing to an external tool to construct an abstract syntax tree (AST) and (ii) enforces recursive reasoning over each intermediate sub-expression with focused context. This framework reliably mitigates deep-composition failures, achieving substantial performance improvement at large depths (e.g., F1-Score = 1.0 at depth 100).

Long-horizon complex tasks require foundation models to accumulate information, maintain internal states, and adapt over extended interactions. Safety should be an intrinsic property of the model itself, rather than a behavioral constraint relying solely on external safeguards or post-hoc alignment such as supervised fine-tuning. This motivates Safety from Within, where safety-relevant capabilities are represented and invoked through the model's native computation. We present Safin-1, a family of foundation models realizing this principle through memory routing and state evolution. Safin-1 is built on Memory-Anchor Routing across Context History (MARCH), a network architecture that maintains structured memory states and selectively retrieves relevant historical information through content-conditioned routing. It supports test-time adaptation of persistent capability states without repeatedly modifying the backbone, enabling controlled specialization over a shared foundation. We investigate this interface on downstream safety tasks through a Safety State, demonstrating effective state-based adaptation with substantial safety improvements. More broadly, the routed-state interface unifies contextual memory and persistent capability adaptation within the model's native computation, reframing memory from a passive record of prior context into an active substrate for maintaining and evolving model behavior. Evaluations across general capabilities, long-context understanding, retrieval, and efficiency further validate Safin-1. These findings provide a path toward safety as a state-native and adaptively maintainable capability. This work is only an initial architectural exploration of Safety from Within, and substantial further work is needed to realize this broader vision.

Quantified formulas with Uninterpreted Functions (UFs) over non-linear real arithmetic pose fundamental challenges for Satisfiability Modulo Theories (SMT) solving. Traditional quantifier instantiation methods struggle because they lack semantic understanding of UF constraints, forcing them to search through unbounded solution spaces with limited guidance. We present AquaForte, a framework that leverages Large Language Models to provide semantic guidance for UF instantiation by generating instantiated candidates for function definitions that satisfy the constraints, thereby significantly reducing the search space and complexity for solvers. Our approach preprocesses formulas through constraint separation, uses structured prompts to extract mathematical reasoning from LLMs, and integrates the results with traditional SMT algorithms through adaptive instantiation. AquaForte maintains soundness through systematic validation: LLM-guided instantiations yielding SAT solve the original problem, while UNSAT results generate exclusion clauses for iterative refinement. Completeness is preserved by fallback to traditional solvers augmented with learned constraints. Experimental evaluation on SMT-COMP benchmarks demonstrates that AquaForte solves numerous instances where state-of-the-art solvers like Z3 and CVC5 timeout, with particular effectiveness on satisfiable formulas. Our work shows that LLMs can provide valuable mathematical intuition for symbolic reasoning, establishing a new paradigm for SMT constraint solving.

Selecting a subset of features (columns) from a tabular dataset is a ubiquitous challenge in real-world applications. Industry experts seek to minimize model training costs, climate scientists require an interpretable subset of factors to understand extreme weather events, and clinicians need to choose among diagnostic tests due to financial and time constraints. When looking at the scientific literature to determine which feature selection method to use, practitioners across domains face an unrepresentative landscape of benchmarking. Despite extensive research, existing feature selection benchmarks provide limited guidance because they rely on outdated models, ad hoc evaluation protocols, or artificially generated data that do not reflect real-world problems. To close the gap between scientific benchmarking and real-world applications, we introduce SelectArena, a modern benchmark for feature selection. We compare 15 widely used feature selection methods on 71 manually curated real-world tabular datasets, covering classification and regression problems, using standardized evaluation protocols and state-of-the-art tabular (foundation) models. Our results reveal clear trade-offs across predictive performance, runtime, stability, and validity. Tree-based methods, CART and RFImportance, along with F-Test are Pareto-optimal when taking into account predictive performance and runtime. F-Test, information-theory-, and distance-based methods lead on stability and validity, with F-Test emerging as a balanced choice across our metrics. Search-based methods are slow, unstable and achieve low performance. SelectArena turns these findings into practical guidance and, as an extensible platform, supports future feature selection research.

Neurosymbolic approaches integrating large language models with formal reasoning have recently achieved human-level performance on mathematics competition problems in algebra, geometry and number theory. In comparison, combinatorics remains a challenging domain, characterized by a lack of appropriate benchmarks and theorem libraries. To address this gap, we introduce CombiBench, a comprehensive benchmark comprising 100 combinatorial problems, each formalized in Lean~4 and paired with its corresponding informal statement. The problem set covers a wide spectrum of difficulty levels, ranging from middle school to IMO and university level, and span over ten combinatorial topics. CombiBench is suitable for testing IMO solving capabilities since it includes all IMO combinatorial problems since 2000 (except IMO 2004 P3 as its statement contain an images). Furthermore, we provide a comprehensive and standardized evaluation framework, dubbed Fine-Eval (for Fill-in-the-blank in Lean Evaluation), for formal mathematics. It accommodates not only proof-based problems but also, for the first time, the evaluation of fill-in-the-blank questions. Using Fine-Eval as the evaluation method and Kimina Lean Server as the backend, we benchmark several LLMs on CombiBench and observe that their capabilities for formally solving combinatorial problems remain limited. Among all models tested (none of which has been trained for this particular task), Kimina-Prover attains the best results, solving 7 problems (out of 100) under both ``with solution'' and ``without solution'' scenarios. We open source the benchmark dataset alongside with the code of the proposed evaluation method at https://github.com/MoonshotAI/CombiBench/.

Live sports commentary is grounded generation under a deadline: statements concern real, named athletes, the grounding state changes every few seconds, and no reference text exists at generation time. We present Pitwall, a production system that generates natural-language Formula 1 strategy briefings in English, Spanish, and Portuguese, treating faithfulness as an architectural property rather than an aspiration: every published sentence is decomposed into typed factual claims (positions, gaps, tyres, pace, overtakes, race control) and each claim is verified against the probabilistic race state that prompted it. The same verifier gates the fine-tuning data: of 3,045 model-written targets, only the 81.9% whose every claim is state-supported are retained, the rest falling back to a provably faithful template, so the generator never sees an ungrounded target. Verification is meaningful because of the grounding substrate: a vectorized Monte Carlo engine (N=2,000 per-lap race continuations) calibrated on 126 races (2018-2024) and validated on fully held-out 2025-2026 seasons (winner-in-top-3 90.3% over 155 backtests; held-out Brier 0.0745). A recurring finding spans both halves of the system: virtues trade off and must be gated separately. In simulation, calibration-optimal is not decision-optimal; in generation, fine-tuning on richer targets buys vividness that collapses into hallucination when the grounding state is sparse -- a failure a four-base replication traces to base-model instruction adherence, not scale, and that sparse-context auditing removes from the production model. End-to-end operation -- live timing to verified trilingual briefings -- was confirmed at two consecutive live Grands Prix (Austria and Britain, 2026); at Silverstone a timestamped probability trace, committed to disk before the outcome was known, locked onto the eventual winner ten laps before the flag.

Point-adjustment (PA), for years the default scoring protocol in time-series anomaly detection (TSAD), was shown by Kim et al. (2022) to award near-perfect F1 to random anomaly scores. The field adopted a suite of replacement metrics (PA%K, range-based precision/recall, affiliation precision/recall, and Volume-Under-the-Surface, VUS, ROC/PR). We ask, independently and adversarially, whether these resist no-skill detectors on real benchmarks, and find the answer turns entirely on one overlooked variable: N, the number of random attempts an adversary reports the best of. Under a single honest run (N=1), not one replacement metric is gameable on any of six benchmarks (UCR, SMD, SMAP, MSL, NAB, PSM): a random detector reaches 90% of the best real detector's score on at most 11% of series for affiliation-F1, 5% for the ROC family, and 2% for the PR-based metrics and PA%K. But under best-of-N reporting, the seed-shopping endemic to ML, the metrics split sharply. affiliation-F1 and every ROC-based metric inflate steeply, affiliation crossing gameable (25% of series) by N=3 and reaching 0.98 at the full pool (N=41), the ROC family crossing by N=9-11; the PR-based metrics and PA%K stay near-flat at every N, floored near the anomaly prevalence (the lone exception is NAB at large N). A paired test finds VUS-ROC inflated on 131 series where its sibling VUS-PR is not, and never the reverse. The ROC-vs-PR split follows from the order-statistic behaviour of AUC under extreme class imbalance (a random PR-AUC is floored at prevalence); affiliation inflates by a second route, its extreme single-run leniency (already fragile at N=1). We release a pip-installable stress-test harness, and recommend reporting single-run scores or disclosing N and preferring PR-based metrics, which resist best-of-N inflation on nearly every benchmark.

High-throughput scientific facilities such as the Large Hadron Collider depend on real-time event filtering (triggering) under tight constraints on bandwidth, latency, and storage. In practice, trigger menus are largely static and hand-tuned and can become suboptimal as detector conditions, pileup, and background composition drift over time. We cast online threshold tuning as a sequential decision-making problem: a reinforcement learning agent ingests streaming summaries of recent rates and signal-sensitive features and updates trigger thresholds to maximize signal efficiency while tracking a target background rate within a tolerance band. We adapt Group-Filtered Policy Optimization (GFPO) to streaming control and introduce two variants (GFPO-F, GFPO-FR) that enforce background rate feasibility during training. On a benchmark that emulates realistic collider operation, we study two representative triggers: a total transverse energy (H_{T}) trigger sensitive to pileup variation, and an anomaly-detection (AD) trigger based on reconstruction loss for rare or non-standard signatures. On Monte Carlo streams, our agent increases the fraction of in-tolerance time intervals by 48\% (H_T) and 28\% (AD), with a cumulative gain of up to 2\% in signal efficiency on those in-tolerance intervals. Transferring from simulation to real collision data (CMS Run 283408), the same agent, without fine-tuning, achieves a 56\% (H_T) and 28\% (AD) in-tolerance improvement over baselines, with further signal-efficiency gain on both triggers. To our knowledge, this is the first demonstration of RL-based trigger control on real Large Hadron Collider collision data. Code is available at https://github.com/Zixind/GFPO_LHC (see repo for details).

Safe offline RL is a promising way to bypass risky online interactions towards safe policy learning. Most existing methods only enforce soft constraints, i.e., constraining safety violations in expectation below thresholds predetermined. This can lead to potentially unsafe outcomes, thus unacceptable in safety-critical scenarios. An alternative is to enforce the hard constraint of zero violation. However, this can be challenging in offline setting, as it needs to strike the right balance among three highly intricate and correlated aspects: safety constraint satisfaction, reward maximization, and behavior regularization imposed by offline datasets. Interestingly, we discover that via reachability analysis of safe-control theory, the hard safety constraint can be equivalently translated to identifying the largest feasible region given the offline dataset. This seamlessly converts the original trilogy problem to a feasibility-dependent objective, i.e., maximizing reward value within the feasible region while minimizing safety risks in the infeasible region. Inspired by these, we propose FISOR (FeasIbility-guided Safe Offline RL), which allows safety constraint adherence, reward maximization, and offline policy learning to be realized via three decoupled processes, while offering strong safety performance and stability. In FISOR, the optimal policy for the translated optimization problem can be derived in a special form of weighted behavior cloning. Thus, we propose a novel energy-guided diffusion model that does not require training a complicated time-dependent classifier to extract the policy, greatly simplifying the training. We compare FISOR against baselines on DSRL benchmark for safe offline RL. Evaluation results show that FISOR is the only method that can guarantee safety satisfaction in all tasks, while achieving top returns in most tasks.

Large language models (LLMs) show inherent brittleness in their safety mechanisms, as evidenced by their susceptibility to jailbreaking and even non-malicious fine-tuning. This study explores this brittleness of safety alignment by leveraging pruning and low-rank modifications. We develop methods to identify critical regions that are vital for safety guardrails, and that are disentangled from utility-relevant regions at both the neuron and rank levels. Surprisingly, the isolated regions we find are sparse, comprising about 3% at the parameter level and 2.5% at the rank level. Removing these regions compromises safety without significantly impacting utility, corroborating the inherent brittleness of the model's safety mechanisms. Moreover, we show that LLMs remain vulnerable to low-cost fine-tuning attacks even when modifications to the safety-critical regions are restricted. These findings underscore the urgent need for more robust safety strategies in LLMs.

Fast feedforward networks (FFFs) are a class of neural networks that exploit the observation that different regions of the input space activate distinct subsets of neurons in wide networks. FFFs partition the input space into separate sections using a differentiable binary tree of neurons and during inference descend the binary tree in order to improve computational efficiency. Inspired by Mixture of Experts (MoE) research, we propose the incorporation of load balancing and Master Leaf techniques into the FFF architecture to improve performance and simplify the training process. We reproduce experiments found in literature and present results on FFF models enhanced using these techniques. The proposed architecture and training recipe achieves up to 16.3% and 3% absolute classification accuracy increase in training and test accuracy, respectively, compared to the original FFF architecture. Additionally, we observe a smaller variance in the results compared to those reported in prior research. These findings demonstrate the potential of integrating MoE-inspired techniques into FFFs for developing more accurate and efficient models.

Existing benchmarks for tool-using LLM agents primarily report single-run success rates and miss reliability properties required in production. We introduce ReliabilityBench, a benchmark for evaluating agent reliability across three dimensions: (i) consistency under repeated execution using pass^k, (ii) robustness to semantically equivalent task perturbations at intensity ε, and (iii) fault tolerance under controlled tool/API failures at intensity λ. ReliabilityBench contributes a unified reliability surface R(k,ε,λ), action metamorphic relations that define correctness via end-state equivalence rather than text similarity, and a chaos-engineering-style fault injection framework (timeouts, rate limits, partial responses, schema drift). We evaluate two models (Gemini 2.0 Flash, GPT-4o) and two agent architectures (ReAct, Reflexion) across four domains (scheduling, travel, customer support, e-commerce) over 1,280 episodes. Perturbations alone reduce success from 96.9% at ε=0 to 88.1% at ε=0.2. Rate limiting is the most damaging fault in ablations. ReAct is more robust than Reflexion under combined stress, and Gemini 2.0 Flash achieves comparable reliability to GPT-4o at much lower cost. ReliabilityBench provides a systematic framework for assessing production readiness of LLM agents.

As Neural Processing Units (NPU) or accelerators are increasingly deployed in a variety of applications including safety critical applications such as autonomous vehicle, and medical imaging, it is critical to understand the fault-tolerance nature of the NPUs. We present a reliability study of Arm's Ethos-U55, an important industrial-scale NPU being utilised in embedded and IoT applications. We perform large scale RTL-level fault injections to characterize Ethos-U55 against the Automotive Safety Integrity Level D (ASIL-D) resiliency standard commonly used for safety-critical applications such as autonomous vehicles. We show that, under soft errors, all four configurations of the NPU fall short of the required level of resiliency for a variety of neural networks running on the NPU. We show that it is possible to meet the ASIL-D level resiliency without resorting to conventional strategies like Dual Core Lock Step (DCLS) that has an area overhead of 100%. We achieve so through selective protection, where hardware structures are selectively protected (e.g., duplicated, hardened) based on their sensitivity to soft errors and their silicon areas. To identify the optimal configuration that minimizes the area overhead while meeting the ASIL-D standard, the main challenge is the large search space associated with the time-consuming RTL simulation. To address this challenge, we present a statistical analysis tool that is validated against Arm silicon and that allows us to quickly navigate hundreds of billions of fault sites without exhaustive RTL fault injections. We show that by carefully duplicating a small fraction of the functional blocks and hardening the Flops in other blocks meets the ASIL-D safety standard while introducing an area overhead of only 38%.

Boolean satisfiability (SAT) problem, the first problem proven to be NP-complete, has become a fundamental challenge in computational complexity, with widespread applications in optimization and verification across many domains. Despite significant algorithmic advances over the past two decades, the performance of SAT solvers has improved at a limited pace. Notably, the 2025 competition winner shows only about a 2X improvement over the 2006 winner in SAT Competition performance after nearly 20 years of effort. This paper introduces GaloisSAT, a novel hybrid GPU-CPU SAT solver that integrates a differentiable SAT solving engine powered by modern machine learning infrastructure on GPUs, followed by a traditional CDCL-based SAT solving stage on CPUs. GaloisSAT is benchmarked against the latest versions of state-of-the-art solvers, Kissat and CaDiCaL, using the SAT Competition 2024 benchmark suite. Results demonstrate substantial improvements in the official SAT Competition metric PAR-2 (penalized average runtime with a timeout of 5,000 seconds and a penalty factor of 2). Specifically, GaloisSAT achieves an 8.41X speedup in the satisfiable category and a 1.29X speedup in the unsatisfiable category compared to the strongest baselines.

Large language models are increasingly used for content moderation, but most evaluations still report aggregate accuracy on individual benchmarks. We introduce Safety-Flag, which places seven widely used safety benchmarks (BeaverTails, XSTest, Ethics, WildGuard, Aegis, ToxiChat, and ToxiGen) into a single balanced flag / do-not-flag protocol. We release item-level decisions and confidence scores for six general-purpose LLMs and four dedicated guards, together with three reference models, evaluated on the same items. Safety-Flag measures three dimensions of moderator reliability: error direction, probability calibration, and confidence-based error ranking for human review. They often disagree. Aggregate accuracy does not reveal error direction: one model flags 85% of benign content, whereas another misses 54% of harmful content. All six general-purpose models are overconfident; fitting one temperature per model reduces calibration error by 2.8--6.0times without changing predicted labels or confidence ordering. Confidence-based abstention lowers selective risk for every model, although the gains depend on how well confidence ranks errors. Dedicated guards produce fewer false alarms and are better calibrated, but several have higher miss rates outside their documented coverage. We release the benchmark, fixed item lists, evaluation code, per-item model outputs, and leaderboard at: https://github.com/yibo-hu-lab/safety-flag-benchmark.

Safety alignment in Large Language Models (LLMs) often involves mediating internal representations to refuse harmful requests. Recent research has demonstrated that these safety mechanisms can be bypassed by ablating or removing specific representational directions within the model. In this paper, we propose the opposite approach: Rank-One Safety Injection (ROSI), a white-box method that amplifies a model's safety alignment by permanently steering its activations toward the refusal-mediating subspace. ROSI operates as a simple, fine-tuning-free rank-one weight modification applied to all residual stream write matrices. The required safety direction can be computed from a small set of harmful and harmless instruction pairs. We show that ROSI consistently increases safety refusal rates - as evaluated by Llama Guard 3 - while preserving the utility of the model on standard benchmarks such as MMLU, HellaSwag, and Arc. Furthermore, we show that ROSI can also re-align 'uncensored' models by amplifying their own latent safety directions, demonstrating its utility as an effective last-mile safety procedure. Our results suggest that targeted, interpretable weight steering is a cheap and potent mechanism to improve LLM safety, complementing more resource-intensive fine-tuning paradigms.

Symbolic benchmarks have emerged as a key approach to assess model robustness under minor modifications to STEM-related questions. However, existing symbolic benchmarks mostly remain limited to mathematical reasoning, lack visual grounding, and are predominantly in English. In this work, we introduce Sci-Rho (Science Rhobustness), a dynamic benchmark for visually-grounded STEM problems spanning five subjects and seven languages, comprising 4,242 problem templates (606 per language) crafted by domain experts, including Olympiad medalists. Each template is implemented as executable Python code that generates diverse but equivalent problem instances by varying numerical values, visual patterns, geometric shapes, color schemes, and function types, resulting in 42,420 instances in total, each paired with reasoning steps and ground-truth solutions. We evaluated 17 state-of-the-art VLMs and discovered a noticeable gap between worst-case accuracy (defined as the proportion of problem templates that a model answers correctly across every generated variation) and average accuracy. We also discovered that smaller models show noticeable performance degradation across languages, whereas proprietary and larger models remain robust. Step-level evaluation reflects this same trend, revealing a significant gap between average F1 and worst-case F1 scores. Finally, our inspection of attention heads of a VLM reveals substantial cross-lingual variation in the relative attention allocated to image tokens compared to text tokens. Our work highlights the importance of evaluation beyond static benchmarks as a metric to measure the quality of VLMs.

Arabic large language models must refuse harmful prompts without over-refusing benign or sensitive prompts, yet a single refusal rate hides this trade-off. We evaluate it using benign refusal B and harmful-prompt refusal H, where H measures refusal rather than harmful compliance. Across five Arabic-capable models and 130 runs on the full human-written AraSafe set, refusal-only supervised fine-tuning (SFT) collapses toward blanket refusal, whereas selected mixed-SFT configurations reach H = 90% to 93% at B = 14% to 23%; four selected configurations exceed the H = 90% target in all three runs, while Fanar does so in two of three. Direct Preference Optimization (DPO) and inference guards change B and H differently across models rather than acting as uniform upgrades. In a blinded 300-response audit, annotator binary-refusal agreement is 89.0% (kappa = 0.78); Qwen3Guard and Aya Expanse 32B reach 88.7% and 91.0% accuracy, respectively, with no conclusive paired difference. Selected SFT raises H on Arabizi for all five models, but none reaches 90%, showing only partial transfer from Modern Standard Arabic. Overall, the results support model-specific operating-point selection: set a deployment target and retain only interventions that improve it.

The rise of vision foundation models (VFMs) calls for systematic evaluation. A common approach pairs VFMs with large language models (LLMs) as general-purpose heads, followed by evaluation on broad Visual Question Answering (VQA) benchmarks. However, this protocol has two key blind spots: (i) the instruction tuning data may not align with VQA test distributions, meaning a wrong prediction can stem from such data mismatch rather than a VFM' visual shortcomings; (ii) VQA benchmarks often require multiple visual abilities, making it hard to tell whether errors stem from lacking all required abilities or just a single critical one. To address these gaps, we introduce AVA-Bench, the first benchmark that explicitly disentangles 14 Atomic Visual Abilities (AVAs) -- foundational skills like localization, depth estimation, and spatial understanding that collectively support complex visual reasoning tasks. By decoupling AVAs and matching training and test distributions within each, AVA-Bench pinpoints exactly where a VFM excels or falters. Applying AVA-Bench to leading VFMs thus reveals distinctive "ability fingerprints," turning VFM selection from educated guesswork into principled engineering. Notably, we find that a 0.5B LLM yields similar VFM rankings as a 7B LLM while cutting GPU hours by 8x, enabling more efficient evaluation. By offering a comprehensive and transparent benchmark, we hope AVA-Bench lays the foundation for the next generation of VFMs.

Autoformalisation (AF) systems map natural language reasoning steps into formal statements in a proof assistant such as Lean. We consider how to assess the faithfulness of these systems. Existing approaches require expensive human-annotated ground truth, or rely on LLM judges or embedding models, which come with limited guarantees of accuracy. In addition, these methods typically only consider inputs that are known to be correct, and therefore do not assess whether the AF translates incorrect inputs faithfully. To address these limitations, we propose a new benchmark for AF faithfulness that is cheap to apply, sound under weak assumptions, and assesses both positive and negative examples. Our method is based on automatically generating perturbed reasoning steps that are designed to be invalid, and then measuring validity preservation on unperturbed steps and invalidity preservation on perturbed steps. We apply our method to eight AF systems across four mathematical datasets, and observe pervasive sycophancy: many AFs "silently correct" invalid inputs into provable statements. The most validity-preserving fine-tuned AFs are also the most sycophantic, suggesting a tension between validity and invalidity preservation in current AF systems.

The deployment of large language models (LLMs) raises significant ethical and safety concerns. While LLM alignment techniques are adopted to improve model safety and trustworthiness, adversaries can exploit these techniques to undermine safety for malicious purposes, resulting in misalignment. Misaligned LLMs may be published on open platforms to magnify harm. To address this, additional safety alignment, referred to as realignment, is necessary before deploying untrusted third-party LLMs. This study explores the efficacy of fine-tuning methods in terms of misalignment, realignment, and the effects of their interplay. By evaluating four Supervised Fine-Tuning (SFT) and two Preference Fine-Tuning (PFT) methods across four popular safety-aligned LLMs, we reveal a mechanism asymmetry between attack and defense. While Odds Ratio Preference Optimization (ORPO) is most effective for misalignment, Direct Preference Optimization (DPO) excels in realignment, albeit at the expense of model utility. Additionally, we identify model-specific resistance, residual effects of multi-round adversarial dynamics, and other noteworthy findings. These findings highlight the need for robust safeguards and customized safety alignment strategies to mitigate potential risks in the deployment of LLMs. Our code is available at https://github.com/zhangrui4041/The-Art-of-Mis-alignment.

An LLM safety patch can pass a benchmark while still being a poor repair. This risk is especially acute for jailbreak repairs, where the goal is to correct a specific unsafe behaviour without changing unrelated behaviours. A patch may block exact evaluation prompts yet fail on close harmful variants, or suppress harmful behaviour by over-refusing benign prompts that share its wording or structure. Existing protocols primarily test whether models can be broken, while aggregate metrics (attack success, refusal rates, global capability) cannot distinguish selective repairs from broader local suppression. To address this gap, we introduce PatchBench, a benchmark of empirically observed model-specific jailbreak failures inducing actionable harmful answers. Starting from 27,870 prompts from 37 public datasets, we curate 15,314 English prompts and query 8 open-source instruction-tuned models. Combining WildGuard filtering, pairwise Elo ranking, and manual verification, we retain a curated bank of 400 high-confidence jailbreak failures. We further introduce PatchBench-Local, an evaluation protocol testing whether a patch is behaviourally precise. For each harmful source prompt, PatchBench-Local generates three families of local neighbours: harmful variants preserving malicious intent, benign prompts with matched structure, and benign prompts reusing key harmful terms. It evaluates harmful-neighbour correction and benign-neighbour preservation, distinguishing selective repair from broader local suppression. Evaluating four activation steering methods with PatchBench-Local and MMLU shows that global capability can remain nearly unchanged while local benign regressions are severe, confirming aggregate metrics miss important collateral damage. PatchBench-Local provides a more precise basis for developing and comparing jailbreak repair methods.

The Forward-Forward (FF) algorithm trains networks layer-by-layer using a local "goodness function," yet sum-of-squares (SoS) has remained the only choice studied. We systematically explore the goodness-function design space and identify a unifying principle: the goodness function must be sensitive to the shape of neural activity, not its total energy. This principle is motivated by the observation that deep network activations follow heavy-tailed distributions and that discriminative information is often concentrated in peak activities. We propose two complementary families: selective functions (top-k, entmax-weighted energy) that measure only peak activity, and shape-sensitive functions (excess kurtosis / "burstiness" and higher-order moments) that reward heavy-tailed distributions via scale-invariant statistics. Combined with separate label-feature forwarding (FFCL), controlled experiments across 13 goodness functions, 5 activations, 6 datasets, and three continuous sweeps, each tracing a characteristic inverted-U, yield 89.0% on Fashion-MNIST and 98.2+-0.1% on MNIST (4x2000), a +32.6pp gain over SoS, with consistent improvements across all benchmarks (+72pp USPS, +52pp SVHN). The scale-invariant nature of burstiness makes it particularly robust to magnitude shifts across layers and datasets.

State machine replication (SMR) and Byzantine fault-tolerant (BFT) consensus guarantee agreement despite a bounded number of arbitrary, colluding faulty participants. However, these guarantees rely on participants outside this set correctly executing the protocol's transition semantics. Agentic validators expose a weaker boundary: an authenticated, responsive, non-equivocating, and protocol-compliant reasoning participant may still endorse a semantically invalid transition due to reasoning errors. We call this failure mode an epistemic fault, and the collective phenomenon the Honest Quorum Problem (where "honest" means protocol-compliant, not semantically correct). Such a quorum can satisfy ordinary checks while forming a certificate for an invalid transition. Thus, agreement alone does not guarantee semantic validity or execution safety. Furthermore, because agentic validators often share model weights, training distributions, prompts, or toolchains, they are highly susceptible to correlated epistemic faults. We define Epistemic Byzantine Fault Tolerance (EBFT), a fault-tolerance model for agentic infrastructure and post-deterministic distributed systems. EBFT augments the conventional Byzantine fault bound with two separate, confidence-indexed quantities: e_δ bounds coherent invalid endorsements outside the Byzantine set, and u_ε bounds unusable validator support that degrades liveness. These quantities characterize semantic safety risk and liveness degradation independently. We derive quorum-threshold conditions for semantic validity, consensus agreement, liveness, and feasible threshold selection, and outline a calibration methodology for estimating these budgets. We show that adding nominally distinct agents improves fault tolerance only when it measurably reduces the upper-tail concentration of invalid endorsements or unusable support.

We present, to our knowledge, the first end-to-end FP4 RL post-training, in which both the rollout and training policies, including their forward and backward passes, operate at 4-bit precision. A systematic study reveals that the dominant source of degradation in FP4 RL is not training-side quantization error but rollout activation quantization: outliers stretch the dynamic range so far that a large number of activation values underflow to zero under FP4. Counterintuitively, restoring the training policy to higher precision while keeping the rollout in FP4 makes accuracy worse than full FP4 baseline, exposing rollout-training mismatch as the principal failure mode and ruling out standard pretraining-style fixes. We address this with Rollout Residual Quantization (Rollout-ResQ): a single residual correction term constrained to a hardware-friendly sparsity pattern, added only to the FP4 rollout matmul -- a lightweight correction that recovers most of the precision lost to outlier-driven underflow without inflating the rollout's compute footprint. On Qwen2.5-3B and Qwen2.5-Math-7B, Rollout-ResQ paired with the HiFloat4 (HiF4) format -- whose three-level hierarchical scaling preserves resolution under FP4's tight 4-bit budget -- closes the accuracy gap to BF16 from 4.9% to 1.1%, bringing fully quantized FP4 RL within striking distance of full precision. Applied to the open-standard MXFP4, the same recipe narrows the gap from 13.6% to 5.3%, revealing that FP4 format choice is a key factor that determines the ceiling on recoverable accuracy. Together, these results establish HiF4 as the enabling format for end-to-end FP4 RL post-training, and Rollout-ResQ as the activation-side mechanism that makes the gap to BF16 closable.

Mixed-precision quantization is a promising approach for compressing large language models under tight memory budgets. However, existing mixed-precision methods typically suffer from one of two limitations: they either rely on expensive discrete optimization to determine precision allocation, or introduce hardware inefficiencies due to irregular memory layouts. We propose SFMP, a search-free and hardware-friendly mixed-precision quantization framework for large language models. The framework is built upon four novel ideas: Fractional bit-width, which extends integer bit-width for weight matrix to fractional value and transforms discrete precision allocation as a continuous problem; 2)Block-wise mixed-precision, enabling fine-grained precision within weight matrices while remaining hardware-friendly; 3)Row-column weight reordering, which aggregates salient weights via row and column reordering, incurring only a small activation reordering overhead during inference; 4)Unified GEMM kernel, which supports mixed-precision GEMM at arbitrary average bit-width. Extensive experiments demonstrate that SFMP outperforms state-of-the-art layer-wise mixed-precision methods under the same memory constraints, while significantly reducing quantization cost and improving inference efficiency. Code is available at https://github.com/Nkniexin/SFMP

Ensuring safe, policy-compliant outputs from large language models requires real-time content moderation that can scale across multiple safety dimensions. However, state-of-the-art guardrail models rely on autoregressive decoders with 7B--27B parameters, reformulating what is fundamentally a classification problem as sequential text generation, a design choice that incurs high latency and scales poorly to multi-aspect evaluation. In this work, we introduce GLiGuard, a 0.3B-parameter schema-conditioned bidirectional encoder adapted from GLiNER2 for LLM content moderation. The key idea is to encode task definitions and label semantics directly into the input sequence as structured token schemas, enabling simultaneous evaluation of prompt safety, response safety, refusal detection, 14 fine-grained harm categories, and 11 jailbreak strategies in a single non-autoregressive forward pass. This schema-conditioned design lets supported task and label blocks be composed directly in the input schema at inference time. Across nine established safety benchmarks, GLiGuard achieves F1 scores competitive with 7B--27B decoder-based guards despite being 23--90times smaller, while delivering up to 16times higher throughput and 17times lower latency. These results suggest that compact bidirectional encoders can approach the accuracy of much larger guard models while drastically reducing inference cost. Code and models are available at https://github.com/fastino-ai/GLiGuard.

Safety alignment instills in Large Language Models (LLMs) a critical capacity to refuse malicious requests. Prior works have modeled this refusal mechanism as a single linear direction in the activation space. We posit that this is an oversimplification that conflates two functionally distinct neural processes: the detection of harm and the execution of a refusal. In this work, we deconstruct this single representation into a Harm Detection Direction and a Refusal Execution Direction. Leveraging this fine-grained model, we introduce Differentiated Bi-Directional Intervention (DBDI), a new white-box framework that precisely neutralizes the safety alignment at critical layer. DBDI applies adaptive projection nullification to the refusal execution direction while suppressing the harm detection direction via direct steering. Extensive experiments demonstrate that DBDI outperforms prominent jailbreaking methods, achieving up to a 97.88\% attack success rate on models such as Llama-2. By providing a more granular and mechanistic framework, our work offers a new direction for the in-depth understanding of LLM safety alignment.

Recent advances in reinforcement learning (RL) have led to substantial improvements in the mathematical reasoning abilities of LLMs, as measured by standard benchmarks. Yet these gains often persist even when models are trained with flawed signals, such as random or inverted rewards. This raises a fundamental question: do such improvements reflect genuine reasoning, or are they merely artifacts of overfitting to benchmark-specific patterns? To answer this question, we adopt an evaluation-centric perspective and highlight two critical shortcomings in existing protocols. First, benchmark contamination arises because test problems are publicly available, thereby increasing the risk of data leakage. Second, evaluation fragility results from reliance on single-instance assessments, which are sensitive to stochastic outputs and fail to capture reasoning consistency. These limitations suggest the need for a new evaluation paradigm that can probe reasoning ability beyond memorization and one-off success. As response, we propose VAR-MATH, a symbolic evaluation framework that converts fixed numerical problems into parameterized templates and requires models to solve multiple instantiations of each. This design enforces consistency across structurally equivalent variants, mitigates contamination, and enhances robustness through bootstrapped metrics. We apply VAR-MATH to transform three popular benchmarks, AMC23, AIME24, and AIME25, into their symbolic counterparts, VAR-AMC23, VAR-AIME24, and VAR-AIME25. Experimental results show substantial performance drops for RL-trained models on these variabilized benchmarks, especially for smaller models, with average declines of 47.9\% on AMC23, 58.8\% on AIME24, and 72.9\% on AIME25. These findings indicate that some existing RL methods rely on superficial heuristics and fail to generalize beyond specific numerical forms.

Modern instruction-tuned large language models (LLMs) have made remarkable progress in code generation. However, these LLMs fine-tuned with standard supervised fine-tuning (SFT) sometimes generate plausible-looking but functionally incorrect code variants. This issue likely stems from the limitation of standard SFT, which treats all tokens equally during optimization and fails to emphasize the error-sensitive segments-specific code differences between correct implementations and similar incorrect variants. To address this problem, we propose Fault-Aware Fine-Tuning (FAIT), a novel fine-tuning technique that enhances LLMs' code generation by (1) extracting multi-granularity (line/token-level) differences between correct and incorrect yet similar implementations to identify error-sensitive segments, and (2) dynamically prioritizing those segments during training via dynamic loss weighting. Through extensive experiments on seven LLMs across three widely-used benchmarks, our method achieves an average relative improvement of 6.9% on pass@1 with just one epoch of training, with some enhanced 6.7B LLMs outperforming closed-source models, e.g., GPT-3.5-Turbo. Furthermore, our fine-tuning technique demonstrates strong generalization with performance improvements ranging from 3.8% to 19.1% across diverse instruction-tuned LLMs, and our ablation studies confirm the contributions of different granularities of differences and loss function components.

Collisions between cyclists and pedestrians at urban intersections remain a persistent source of injuries, yet few systems attempt real-time warnings to unequipped road users using commodity hardware. We present a prototype collision warning system that runs on a single edge device with a wide-angle fisheye camera, producing audible and visual alerts at 30\,fps. The system makes four contributions. First, we develop a calibration pipeline for ultra-wide fisheye lenses that overcomes corner-detection failure and optimizer divergence through perspective remapping and direct bundle adjustment. Second, we combine fisheye-aware object detection with a closed-form ground-plane projection via a precomputed lookup table. Third, we introduce a design-time conformance simulation with 24 scripted hazard scenarios, stochastic size-aware detection failures, and a latency sweep showing that a first-order kinematic predictor maintains the mean warning budget above the distracted-pedestrian reaction time across realistic camera latencies. Fourth, we formalize the decision layer as a separable, auditable testbench with explicit deployment gates, contestability mechanisms, and a residual risk register. Under conformance testing with fisheye localization error, the selected pipeline configuration achieves 93.3\% sensitivity and 92.3\% specificity, with a mean warning budget of 3.3\,s. The system design was informed by community-aided design workshops. Code and replication scripts are available at https://github.com/mkturkcan/bikeped.

We develop a method for training neural networks on Boolean data in which the values at all nodes are strictly pm 1, and the resulting models are typically equivalent to networks whose nonzero weights are also pm 1. The method replaces loss minimization with a nonconvex constraint formulation. Each node implements a Boolean threshold function (BTF), and training is expressed through a divide-and-concur decomposition into two complementary constraints: one enforces local BTF consistency between inputs, weights, and output; the other imposes architectural concurrence, equating neuron outputs with downstream inputs and enforcing weight equality across training-data instantiations of the network. The reflect-reflect-relax (RRR) projection algorithm is used to reconcile these constraints. Each BTF constraint includes a lower bound on the margin. When this bound is sufficiently large, the learned representations are provably sparse and equivalent to networks composed of simple logical gates with pm 1 weights. Across a range of tasks -- including multiplier-circuit discovery, binary autoencoding, logic-network inference, and cellular automata learning -- the method achieves exact solutions or strong generalization in regimes where standard gradient-based methods struggle. These results demonstrate that projection-based constraint satisfaction provides a viable and conceptually distinct foundation for learning in discrete neural systems, with implications for interpretability and efficient inference.

Aligning large language models (LLMs) with deployment-specific requirements is critical but inherently imperfect. Despite extensive training, models remain susceptible to misalignment and adversarial inputs such as jailbreaks. Content moderation filters are commonly used as external safeguards, though they typically focus narrowly on safety. We introduce SGM (Specification-Guided Moderation), a flexible framework for training moderation filters grounded in user-defined specifications that go beyond standard safety concerns. SGM automates training data generation without relying on human-written examples, enabling scalable support for diverse, application-specific alignment goals. SGM-trained filters perform on par with state-of-the-art safety filters built on curated datasets, while supporting fine-grained and user-defined alignment control.

AI-based automated vehicle testing is challenging because a model that passes every test condition can still fail in the real world. Formal verification offers a way to directly address this gap. On a simulated highway and an arterial road we trained two small end-to-end steering networks each in CARLA, one on clear conditions alone and one on clear, fog, night and low sun. All four models were driven against a 2.19 ft lane-departure budget. Without driving again, we used bound propagation, a formal method that reads the trained weights, to compute how far steering can drift at every disturbance strength between two captured images. One calculation covers more than a campaign could drive: on the arterial it spans 133 poses, where ten intensities each would be 10^133 combinations, in minutes on one GPU. Not only did formal verification find conditions that broke the clear-trained policy without simulation testing, it provided some preliminary evidence for potential failures between the test cases. Our overall conclusion is that formal verification is a viable complement to simulation, and could be adopted as a part of verification and validation for automated driving.

We propose JFR, a Bellman-Ford-based optimization framework leveraging frontier contraction and abstract multi-hop jump propagation to accelerate shortest-path computation while strictly preserving correctness. JFR achieves substantial reductions in relaxation operations, ranging from 25 to 99 percent, across sparse, dense, and negative-edge graphs, ensuring robust performance even under adversarial or highly connected topologies. On ultra-large graphs with up to N=20,000 nodes and 295 million edges, JFR maintains strong operational reductions and comparable or improved runtime relative to SPFA-SLF, demonstrating consistent robustness across graph size and density. Lower relaxation counts imply reduced memory-access overheads and computational effort; this normalized work reduction highlights JFR's suitability for scenarios requiring high throughput or energy-conscious operation. Future work focuses on integrating high-performance queue structures, adaptive frontier strategies, and cache-aware techniques to further reduce constant-factor overheads and fully realize JFR's practical runtime potential.

Although LLMs have demonstrated improved performance by scaling parallel test-time compute, doing so relies on generating reasoning paths that are both diverse and accurate. For challenging problems, the forking tokens that trigger diverse yet correct reasoning modes are typically deep in the sampling tree. Consequently, common strategies to encourage diversity, such as temperature scaling, encounter a worsened trade-off between diversity and accuracy. Motivated by this challenge, we treat parallel reasoning as a set-of-next-token-prediction problem, and incorporate a set-based global loss into Supervised Fine-Tuning (SFT) using self-supervised bipartite matching between our global forking tokens and unique reasoning traces. We observe that, while naive fine-tuning with multiple reasoning traces collapses these unique reasoning modes, our proposed method, Set Supervised Fine-Tuning (SSFT), preserves these modes and produces emergent global forking tokens. Experiments on multiple reasoning benchmarks show that our SSFT consistently outperforms SFT under both Pass@1 and Cons@k metrics.

This paper presents the first comprehensive empirical study demonstrating the efficacy of the Brain Floating Point (BFLOAT16) half-precision format for Deep Learning training across image classification, speech recognition, language modeling, generative networks and industrial recommendation systems. BFLOAT16 is attractive for Deep Learning training for two reasons: the range of values it can represent is the same as that of IEEE 754 floating-point format (FP32) and conversion to/from FP32 is simple. Maintaining the same range as FP32 is important to ensure that no hyper-parameter tuning is required for convergence; e.g., IEEE 754 compliant half-precision floating point (FP16) requires hyper-parameter tuning. In this paper, we discuss the flow of tensors and various key operations in mixed precision training, and delve into details of operations, such as the rounding modes for converting FP32 tensors to BFLOAT16. We have implemented a method to emulate BFLOAT16 operations in Tensorflow, Caffe2, IntelCaffe, and Neon for our experiments. Our results show that deep learning training using BFLOAT16 tensors achieves the same state-of-the-art (SOTA) results across domains as FP32 tensors in the same number of iterations and with no changes to hyper-parameters.

Evaluating test cases automatically generated by Large Language Models (LLMs) is a critical yet challenging task. Existing benchmarks often evaluate the exclusion ratio on large, unstructured collections of wrong codes, suffering from high computational costs and score inflation. Furthermore, they inadvertently reward generators that detect common, trivial bugs, while failing to penalize their inability to identify rare yet critical faults. In this work, we connect two fundamental questions: (1) What is the minimal set of wrong codes sufficient to represent the entire error space? and (2) What is the minimal set of test cases needed to distinguish them? We introduce a novel framework that formalizes benchmark construction as finding an optimal diagnostic basis in a binary code-test matrix, where rows represent wrong codes and columns represent test case results. The rank of this matrix specifies the minimal number of independent error patterns (wrong codes) and provides a tight upper bound on the number of test cases required for complete fault coverage. Our objective is to identify a basis of size equal to the matrix rank that maximizes internal diversity. To tackle this NP-hard problem, we propose WrongSelect, an efficient approximation algorithm to select maximally diverse wrong codes. Applying this framework to millions of competitive programming submissions, we construct TC-Bench, a compact, diverse, and inflation-resistant benchmark. Extensive experiments show that even the most advanced test case generation methods achieve only ~60% exclusion rates on TC-Bench, exposing a significant gap in their diagnostic power and highlighting substantial room for future improvement. Our dataset is available at: https://huggingface.co/datasets/Luoberta/TC-Bench and our code is at: https://github.com/Luowaterbi/TC-Bench.

Counterexample-guided repair aims at creating neural networks with mathematical safety guarantees, facilitating the application of neural networks in safety-critical domains. However, whether counterexample-guided repair is guaranteed to terminate remains an open question. We approach this question by showing that counterexample-guided repair can be viewed as a robust optimisation algorithm. While termination guarantees for neural network repair itself remain beyond our reach, we prove termination for more restrained machine learning models and disprove termination in a general setting. We empirically study the practical implications of our theoretical results, demonstrating the suitability of common verifiers and falsifiers for repair despite a disadvantageous theoretical result. Additionally, we use our theoretical insights to devise a novel algorithm for repairing linear regression models based on quadratic programming, surpassing existing approaches.

Interactive driving exposes a failure mode that is easy to miss in rule-aware autonomous-driving stacks: a hard-rule margin can be negative for an ego candidate even though a small lawful accommodation by a non-priority agent would restore feasibility. Existing rulebooks, shields, and reachability filters are strong at vetoing unsafe actions, while prediction-based planners model likely responses. Neither returns a runtime proof object that states which bounded multi-agent edit repairs the maneuver, who owns the edit, whether the request is right-of-way affordable, and what ego fallback remains if the request is not observed. We formulate this missing object as *interactive repair certification* and introduce *CARVE*, a prediction-free certificate layer over a finite lattice of ego-owned and agent-owned tactical operators. Agent-owned requests are admissible only inside \(B_j(s) = β(π_j)α_j^{\max}(s)\), a cooperation envelope that separates kinematic reachability from normative priority. The resulting certificate records the binding rule, repair category, repair set, responsibility-weighted cost split, and fallback. On 589 Lanelet2-geometry-grounded INTERACTION replay episodes, CARVE-Greedy accepts 98.64% of initially vetoed maneuvers and recovers 370/378 human-resolved false vetoes, while preserving 589/589 right-of-way respect, zero priority-agent false positives, and 400/400 negative-stress vetoes. We prove certificate soundness, structural right-of-way respect, exact finite-lattice minimality, fallback contingency, and blame-consistency conditions. CARVE does not predict or require another driver's compliance; it certifies whether a proposed interaction is bounded, attributable, and normatively admissible under declared assumptions.

We propose prioritized unit propagation with periodic resetting, which is a simple but surprisingly effective algorithm for solving random SAT instances that are meant to be hard. In particular, an evaluation on the Random Track of the 2017 and 2018 SAT competitions shows that a basic prototype of this simple idea already ranks at second place in both years. We share this observation in the hope that it helps the SAT community better understand the hardness of random instances used in competitions and inspire other interesting ideas on SAT solving.

This study investigates how to efficiently build a domain-specialized large language model (LLM) for statistics using the lightweight LLaMA-3.2-3B family as the foundation model (FM). We systematically compare three multi-stage training pipelines--starting from a base FM with no instruction-following capability, a base FM augmented with post-hoc instruction tuning, and an instruction-tuned FM with strong general reasoning abilities--across continual pretraining, supervised fine-tuning (SFT), reinforcement learning from human feedback (RLHF) preference alignment, and downstream task fine-tuning (DTFT). Results show that pipelines beginning with a base FM fail to develop meaningful statistical reasoning, even after extensive instruction tuning, SFT, or RLHF alignment. In contrast, starting from LLaMA-3.2-3B-Instruct enables effective domain specialization. A comprehensive evaluation of SFT variants reveals clear trade-offs between domain expertise and general reasoning ability. We further demonstrate that direct preference optimization provides stable and effective RLHF preference alignment. Finally, we show that DTFT must be performed with extremely low intensity to avoid catastrophic forgetting in highly optimized models. The final model, StatLLaMA, achieves strong and balanced performance on benchmarks of mathematical reasoning, common-sense reasoning, and statistical expertise, offering a practical blueprint for developing resource-efficient statistical LLMs. The code is available at https://github.com/HuangDLab/StatLLaMA.

Feature Selection (FS) under domain adaptation (DA) is a critical task in machine learning, especially when dealing with limited target data. However, existing methods lack the capability to guarantee the reliability of FS under DA. In this paper, we introduce a novel statistical method to statistically test FS reliability under DA, named SFS-DA (statistical FS-DA). The key strength of SFS-DA lies in its ability to control the false positive rate (FPR) below a pre-specified level alpha (e.g., 0.05) while maximizing the true positive rate. Compared to the literature on statistical FS, SFS-DA presents a unique challenge in addressing the effect of DA to ensure the validity of the inference on FS results. We overcome this challenge by leveraging the Selective Inference (SI) framework. Specifically, by carefully examining the FS process under DA whose operations can be characterized by linear and quadratic inequalities, we prove that achieving FPR control in SFS-DA is indeed possible. Furthermore, we enhance the true detection rate by introducing a more strategic approach. Experiments conducted on both synthetic and real-world datasets robustly support our theoretical results, showcasing the superior performance of the proposed SFS-DA method.

Current multimodal toxicity benchmarks typically use a single binary hatefulness label. This coarse approach conflates two fundamentally different characteristics of expression: tone and content. Drawing on communication science theory, we introduce a fine-grained annotation scheme that distinguishes two separable dimensions: incivility (rude or dismissive tone) and intolerance (content that attacks pluralism and targets groups or identities) and apply it to 2,030 memes from the Hateful Memes dataset. We evaluate different vision-language models under coarse-label training, transfer learning across label schemes and a joint learning approach that combines the coarse hatefulness label with our fine-grained annotations. Our results show that fine-grained annotations complement existing coarse labels and, when used jointly, improve overall model performance. Moreover, models trained with the fine-grained scheme exhibit more balanced moderation-relevant error profiles and are less prone to under-detection of harmful content than models trained on hatefulness labels alone (FNR-FPR, the difference between false negative and false positive rates: 0.74 to 0.42 for LLaVA-1.6-Mistral-7B; 0.54 to 0.28 for Qwen2.5-VL-7B). This work contributes to data-centric approaches in content moderation by improving the reliability and accuracy of moderation systems through enhanced data quality. Overall, combining both coarse and fine-grained labels provides a practical route to more reliable multimodal moderation.

Synthetic data generation has become a cornerstone for advancing large language models. However, the lack of the quantitative analysis for error tolerance became a critical bottleneck. Consequently, current filtering strategies fluctuate between two extremes: they are either overly aggressive, risking the exclusion of potentially valuable samples, or overly permissive, failing to eliminate erroneous samples effectively. To bridge this gap, this paper introduces Atomic Tree Operation Modeling (ATOM), a framework that decomposes data into functional units (f(x)rightarrow y). ATOM distinguishes benign Operand x perturbations from fatal Operator f perturbations. The former are needlessly discarded by aggressive filtering, while the latter slip through permissive filtering. Our experiments reveal a double dissociation: models are robust to operand perturbations but collapse under operator perturbations. By prioritizing operator over aggressive operand precision, our ATOM-synthesized data outperforms rigorous baselines (e.g., +3.1% gain over LIMA), suggesting that operator diversity matters more than operand precision. Our code is available at https://github.com/Lut-hub/ATOM.

The increasing use of Machine Learning (ML) components embedded in autonomous systems -- so-called Learning-Enabled Systems (LESs) -- has resulted in the pressing need to assure their functional safety. As for traditional functional safety, the emerging consensus within both, industry and academia, is to use assurance cases for this purpose. Typically assurance cases support claims of reliability in support of safety, and can be viewed as a structured way of organising arguments and evidence generated from safety analysis and reliability modelling activities. While such assurance activities are traditionally guided by consensus-based standards developed from vast engineering experience, LESs pose new challenges in safety-critical application due to the characteristics and design of ML models. In this article, we first present an overall assurance framework for LESs with an emphasis on quantitative aspects, e.g., breaking down system-level safety targets to component-level requirements and supporting claims stated in reliability metrics. We then introduce a novel model-agnostic Reliability Assessment Model (RAM) for ML classifiers that utilises the operational profile and robustness verification evidence. We discuss the model assumptions and the inherent challenges of assessing ML reliability uncovered by our RAM and propose solutions to practical use. Probabilistic safety argument templates at the lower ML component-level are also developed based on the RAM. Finally, to evaluate and demonstrate our methods, we not only conduct experiments on synthetic/benchmark datasets but also scope our methods with case studies on simulated Autonomous Underwater Vehicles and physical Unmanned Ground Vehicles.

As LLM agents take on offensive security work, a single out-of-scope tool call can breach a client's engagement boundary, disrupt production, or void a bug-bounty finding. Unlike a fixed safety policy, the boundary that matters is declared in the user's request and must be inferred from intent. That challenge is sharpened by the adversarial nature of offensive security: the same tool call is in or out of scope depending not on the action itself but on the target it touches and the context in which it runs, which no fixed policy can enumerate in advance. We study pre-execution gating: a cheap, trusted LLM judge inspects each call proposed by a strong, swappable agent, and accepts or rejects it before it runs. We introduce ScopeJudge, a benchmark of 4,897 tool calls (7.7% scope violations) from agent trajectories on tasks engineered to tempt agents out of scope and labeled at the call level by professional penetration testers, with substantial inter-grader agreement (Fleiss kappa = 0.64) that sets an expert agreement reference point of F1 = 0.78. We evaluate eight judge models under five transcript strategies, varying how much context the judge sees, from the static policy alone to the full raw transcript, and chart the resulting cost-accuracy Pareto frontier. We find that a static policy is structurally insufficient for scope enforcement: blind to the user's request, judge recall collapses to near zero, confirming that scope lives in the request and that request-conditioned monitoring is necessary. Because a missed violation costs more than a spurious rejection, we report precision, recall, and F1 separately and recommend two operating points: a cost-sensitive configuration and a recall-first one for high-stakes deployments. We release the ScopeJudge dataset to support real-time monitoring and scalable oversight of autonomous security agents.

In critical applications, it is vital for classifiers to defer decision-making to humans. We propose a post-hoc method that makes existing classifiers selectively abstain from predicting certain samples. Our abstaining classifier is incentivized to maintain the original accuracy for each sub-population (i.e. no harm) while achieving a set of group fairness definitions to a user specified degree. To this end, we design an Integer Programming (IP) procedure that assigns abstention decisions for each training sample to satisfy a set of constraints. To generalize the abstaining decisions to test samples, we then train a surrogate model to learn the abstaining decisions based on the IP solutions in an end-to-end manner. We analyze the feasibility of the IP procedure to determine the possible abstention rate for different levels of unfairness tolerance and accuracy constraint for achieving no harm. To the best of our knowledge, this work is the first to identify the theoretical relationships between the constraint parameters and the required abstention rate. Our theoretical results are important since a high abstention rate is often infeasible in practice due to a lack of human resources. Our framework outperforms existing methods in terms of fairness disparity without sacrificing accuracy at similar abstention rates.

Lower numerical precision reduces storage and memory traffic but raises the perturbation floor. We study rank compensation: reinvesting saved memory in a larger approximation rank. For matrices, the singular-value error identity yields a directly testable sufficient condition requiring the additional singular component to offset the perturbation from storing the rank-augmented approximation in lower precision. On ten SuiteSparse matrices, all 100 truncation-dominated configurations (50 FP32 and 50 FP16) are certified non-increases and strict accuracy wins, with mean error ratio 0.963 and storage ratios 58.8% and 29.4% relative to the FP64 baseline. FP16 failures occur only in tail-rank stress tests near the perturbation floor. At the largest resident matrix-application batch, compensated FP32 and FP16 achieve geometric-mean A100 speedups of 1.28times and 2.12times; neither accelerates the smallest batch. For Tensor-Train (TT) approximation, we give a conditional a posteriori extension based on the measured truncation gain and rounded-core perturbation. Across three-way and six-way synthetic tests, FP32 and FP16 achieve combined accuracy-memory wins in 10 of 20 and 14 of 20 trials. On public hyperspectral tensors and FROSTT top-active subtensors, the corresponding counts are 44 of 60 and 54 of 60; four FP16 Salinas-A tail-stress cases fail. No certified TT case exceeds the FP64 error beyond numerical tolerance. Reconstruction of six public tensors yields geometric-mean compensated speedups of 1.38times (FP32) and 1.94times (FP16). Timings cover resident downstream kernels, not factorization, transfers, or end-to-end acceleration.

Time-Series Foundation Models (TSFMs) are rapidly transitioning from research prototypes to core components of critical decision-making systems, driven by their impressive zero-shot forecasting capabilities. However, as their deployment surges, a critical blind spot remains: their fragility under adversarial attacks. This lack of scrutiny poses severe risks, particularly as TSFMs enter high-stakes environments vulnerable to manipulation. We present a systematic, diagnostic study arguing that for TSFMs, robustness is not merely a secondary metric but a prerequisite for trustworthy deployment comparable to accuracy. Our evaluation framework, explicitly tailored to the unique constraints of time series, incorporates normalized, sparsity-aware perturbation budgets and unified scale-invariant metrics across white-box and black-box settings. Across six representative TSFMs, we demonstrate that current architectures are alarmingly brittle: even small perturbations can reliably steer forecasts toward specific failure modes, such as trend flips and malicious drifts. We uncover TSFM-specific vulnerability patterns, including horizon-proximal brittleness, increased susceptibility with longer context windows, and weak cross-model transfer that points to model-specific failure modes rather than generic distortions. Finally, we show that simple adversarial fine-tuning offers a cost-effective path to substantial robustness gains, even with out-of-domain data. This work bridges the gap between TSFM capabilities and safety constraints, offering essential guidance for hardening the next generation of forecasting systems.

Finite-state reasoning, the ability to understand and implement state-dependent behavior, is central to hardware design. In this paper, we present LLM-FSM, a benchmark that evaluates how well large language models (LLMs) can recover finite-state machine (FSM) behavior from natural-language specifications and translate it into correct register transfer-level (RTL) implementations. Unlike prior specification-to-RTL benchmarks that rely on manually constructed examples, LLM-FSM is built through a fully automated pipeline. LLM-FSM first constructs FSM with configurable state counts and constrained transition structures. It then prompts LLMs to express each FSM in a structured YAML format with an application context, and to further convert that YAML into a natural-language (NL) specification. From the same YAML, our pipeline synthesizes the reference RTL and testbench in a correct-by-construction manner. All 1,000 problems are verified using LLM-based and SAT-solver-based checks, with human review on a subset. Our experiments show that even the strongest LLMs exhibit sharply declining accuracy as FSM complexity increases. We further demonstrate that training-time scaling via supervised fine-tuning (SFT) generalizes effectively to out-of-distribution (OOD) tasks, while increasing test-time compute improves reasoning reliability. Finally, LLM-FSM remains extensible by allowing its FSM complexity to scale with future model capabilities.

Explaining why a language model produces a particular output requires local, input-level explanations. Existing methods uncover global capability circuits (e.g., indirect object identification), but not why the model answers a specific input query in a particular way. We introduce query circuits, which directly trace the information flow inside a model that maps a specific input to the output. Unlike surrogate-based approaches (e.g., sparse autoencoders), query circuits are identified within the model itself, resulting in more faithful and computationally accessible explanations. To make query circuits practical, we address two challenges. First, we introduce Normalized Deviation Faithfulness (NDF), a robust metric to evaluate how well a discovered circuit recovers the model's decision for a specific input, and is broadly applicable to circuit discovery beyond our setting. Second, we develop sampling-based methods to efficiently identify circuits that are sparse yet faithfully describe the model's behavior. Across benchmarks (IOI, arithmetic, MMLU, and ARC), we find that there exist extremely sparse query circuits within the model that can recover much of its performance on single queries. For example, a circuit covering only 1.3% of model connections can recover about 60% of performance on an MMLU questions. Overall, query circuits provide a step towards faithful, scalable explanations of how language models process individual inputs. The project page is at https://tony10101105.github.io/query-circuit/.

Alignment in LLMs is more brittle than commonly assumed: misalignment can be triggered by adversarial prompts, benign fine-tuning, emergent misalignment, and goal misgeneralization. Recent evidence suggests that some misalignment behaviors are encoded as linear structure in activation space, making it tractable via steering, while safety alignment has been shown to govern the first few output tokens primarily, leaving subsequent generation unguarded. These findings motivate activation steering as a lightweight runtime defense that continuously corrects misaligned activations throughout generation. We evaluate three methods: Steer-With-Fixed-Coeff (SwFC), which applies uniform additive steering, and two novel projection-aware methods, Steer-to-Target-Projection (StTP) and Steer-to-Mirror-Projection (StMP), that use a logistic regression decision boundary to selectively intervene only on tokens whose activations fall below distributional thresholds. Using malicious system prompts as a controlled proxy for misalignment, we evaluate under two threat models (dishonesty and dismissiveness) and two architectures (Llama-3.3-70B-Instruct, Qwen3-32B). All methods substantially recover target traits (honesty and compassion) while preserving coherence. StTP and StMP better maintain general capabilities (MMLU, MT-Bench, AlpacaEval) and produce less repetition in multi-turn conversations.

Training and deployed inference often cross export, conversion, and platform-specific runtime boundaries. Meganeura asks whether one compact native compiler can span both phases on consumer GPUs. Its typed static graph, automatic differentiation, optimizer, checkpoint, memory planner, and runtime lower specialized programs through Vulkan and Metal. We compare five matched workloads with PyTorch on NVIDIA and AMD discrete GPUs, an AMD APU, Apple silicon, and an Intel iGPU. The protocol separates strict f32 from validated fast paths and gates forward and backward independently. Forty-eight of 50 device-workload-mode cells pass both gates; the other two share one unresolved backward-reference disagreement on a newly supported APU. In strict f32, Meganeura wins 12 of 20 GPU-referenced minimal-latency cells and has a median valid training gap of 1.8x. On the discrete AMD GPU, four of five inference workloads are within 1.10x of compiled ROCm PyTorch and three training workloads are faster. Under accelerated contracts, the worst training gap is 4.6x. Compilation takes 0.1-2.4 seconds versus 6-96 seconds for torch.compile on supported GPU paths; the stripped binary is 13 MiB. Dispatch profiles localize the largest gaps to convolution derivatives and attention backward. A physical Android XR case study transfers a Meganeura-trained decoder into an Adreno/OpenXR application sharing the graphics queue. The results show that general consumer graphics APIs can support a compact shared train-to-deploy stack at useful, sometimes vendor-competitive performance. The measured gaps point to kernel coverage, scheduling, and arithmetic policy rather than an identified API limitation.

Federated learning (FL) is an emerging practical framework for effective and scalable machine learning among multiple participants, such as end users, organizations and companies. However, most existing FL or distributed learning frameworks have not well addressed two important issues together: collaborative fairness and adversarial robustness (e.g. free-riders and malicious participants). In conventional FL, all participants receive the global model (equal rewards), which might be unfair to the high-contributing participants. Furthermore, due to the lack of a safeguard mechanism, free-riders or malicious adversaries could game the system to access the global model for free or to sabotage it. In this paper, we propose a novel Robust and Fair Federated Learning (RFFL) framework to achieve collaborative fairness and adversarial robustness simultaneously via a reputation mechanism. RFFL maintains a reputation for each participant by examining their contributions via their uploaded gradients (using vector similarity) and thus identifies non-contributing or malicious participants to be removed. Our approach differentiates itself by not requiring any auxiliary/validation dataset. Extensive experiments on benchmark datasets show that RFFL can achieve high fairness and is very robust to different types of adversaries while achieving competitive predictive accuracy.

With the advancement of video generation foundation models (VGFMs), customized generation, particularly subject-to-video (S2V), has attracted growing attention. However, a key challenge lies in balancing the intrinsic priors of a VGFM, such as motion coherence, visual aesthetics, and prompt alignment, with its newly derived S2V capability. Existing methods often neglect this balance by enhancing one aspect at the expense of others. To address this, we propose LibraGen, a novel framework that views extending foundation models for S2V generation as a balance game between intrinsic VGFM strengths and S2V capability. Specifically, guided by the core philosophy of "Raising the Fulcrum, Tuning to Balance," we identify data quality as the fulcrum and advocate a quality-over-quantity approach. We construct a hybrid pipeline that combines automated and manual data filtering to improve overall data quality. To further harmonize the VGFM's native capabilities with its S2V extension, we introduce a Tune-to-Balance post-training paradigm. During supervised fine-tuning, both cross-pair and in-pair data are incorporated, and model merging is employed to achieve an effective trade-off. Subsequently, two tailored direct preference optimization (DPO) pipelines, namely Consis-DPO and Real-Fake DPO, are designed and merged to consolidate this balance. During inference, we introduce a time-dependent dynamic classifier-free guidance scheme to enable flexible and fine-grained control. Experimental results demonstrate that LibraGen outperforms both open-source and commercial S2V models using only thousand-scale training data.

Although randomized smoothing has demonstrated high certified robustness and superior scalability to other certified defenses, the high computational overhead of the robustness certification bottlenecks the practical applicability, as it depends heavily on the large sample approximation for estimating the confidence interval. In existing works, the sample size for the confidence interval is universally set and agnostic to the input for prediction. This Input-Agnostic Sampling (IAS) scheme may yield a poor Average Certified Radius (ACR)-runtime trade-off which calls for improvement. In this paper, we propose Input-Specific Sampling (ISS) acceleration to achieve the cost-effectiveness for robustness certification, in an adaptive way of reducing the sampling size based on the input characteristic. Furthermore, our method universally controls the certified radius decline from the ISS sample size reduction. The empirical results on CIFAR-10 and ImageNet show that ISS can speed up the certification by more than three times at a limited cost of 0.05 certified radius. Meanwhile, ISS surpasses IAS on the average certified radius across the extensive hyperparameter settings. Specifically, ISS achieves ACR=0.958 on ImageNet (sigma=1.0) in 250 minutes, compared to ACR=0.917 by IAS under the same condition. We release our code in https://github.com/roy-ch/Input-Specific-Certification.

Perturbation probing generates task-specific causal hypotheses for FFN neurons in large language models using two forward passes per prompt and no backpropagation, followed by a one-time intervention sweep of about 150 passes amortized across all identified neurons. Across eight behavioral circuits, 13 models, and four architecture families, we identify two circuit structures that organize LLM behavior. Opposition circuits appear when RLHF suppresses a pre-training tendency. In safety refusal, about 50 neurons, or 0.014 percent of all neurons, control the refusal template; ablating them changes 80 percent of response formats on 520 AdvBench prompts while producing near-zero harmful compliance, 3 of 520 cases, all with disclaimers. Routing circuits appear for pre-training behaviors distributed through attention. For language selection, residual-stream direction injection switches English to Chinese output on 99.1 percent of 580 benchmark prompts in the 3 of 19 tested models that satisfy three observed conditions: bilingual training, FFN-to-skip signal ratio between 0.3 and 1.1, and linear representability. The same intervention fails on the other 16 models and on math, code, and factual circuits, defining the limits of directional steering. The FFN-to-skip signal ratio, computed from the same two forward passes, distinguishes the two structures and predicts the appropriate intervention. Circuit topology varies by architecture, from Qwen's concentrated FFN bottleneck to Gemma's normalization-shielded circuit. In Qwen3.5-2B, ablating 20 neurons eliminates multi-turn sycophantic capitulation, while amplifying 10 related neurons improves factual correction from 52 percent to 88 percent on 200 TruthfulQA prompts. These results show that perturbation probing offers mechanistic insight into RLHF-organized behavior and a practical toolkit for precision template-layer editing.

Conflicting objectives are general in RL alignment, and training on them data-efficiently is hard. Training a safety guard with RL means optimizing two objectives that conflict: catch real harm, and do not refuse benign prompts. Our finding is that over-refusal improves 22.4% to 12.8%, while under-refusal on adversarial attacks silently worsens 0.27 to 0.33. We present C-Guard, a constitution-grid instrument that generates the RL training data, and C-LIM, a per-cell learnability score that decides each cell's move: prune, densify, amend, expand. C-LIM flags the dead-weight data region before any training budget is spent: 187 untargeted rows had bought zero gain, and our method lifts the same region's learning impact 0.733 to 0.80. Code and the constitution are open-sourced.

Large Vision-Language Models (LVLMs) struggle with puzzles, which require precise perception, rule comprehension, and logical reasoning. Assessing and enhancing their performance in this domain is crucial, as it reflects their ability to engage in structured reasoning - an essential skill for real-world problem-solving. However, existing benchmarks primarily evaluate pre-trained models without additional training or fine-tuning, often lack a dedicated focus on reasoning, and fail to establish a systematic evaluation framework. To address these limitations, we introduce VGRP-Bench, a Visual Grid Reasoning Puzzle Benchmark featuring 20 diverse puzzles. VGRP-Bench spans multiple difficulty levels, and includes extensive experiments not only on existing chat LVLMs (e.g., GPT-4o), but also on reasoning LVLMs (e.g., Gemini-Thinking). Our results reveal that even the state-of-the-art LVLMs struggle with these puzzles, highlighting fundamental limitations in their puzzle-solving capabilities. Most importantly, through systematic experiments, we identify and analyze key factors influencing LVLMs' puzzle-solving performance, including the number of clues, grid size, and rule complexity. Furthermore, we explore two Supervised Fine-Tuning (SFT) strategies that can be used in post-training: SFT on solutions (S-SFT) and SFT on synthetic reasoning processes (R-SFT). While both methods significantly improve performance on trained puzzles, they exhibit limited generalization to unseen ones. We will release VGRP-Bench to facilitate further research on LVLMs for complex, real-world problem-solving. Project page: https://yufan-ren.com/subpage/VGRP-Bench/.

The rising computational and energy demands of deep neural networks (DNNs), driven largely by backpropagation (BP), challenge sustainable AI development. This paper rigorously investigates three BP-free training methods: the Forward-Forward (FF), Cascaded-Forward (CaFo), and Mono-Forward (MF) algorithms, tracing their progression from foundational concepts to a demonstrably superior solution. A robust comparative framework was established: each algorithm was implemented on its native architecture (MLPs for FF and MF, a CNN for CaFo) and benchmarked against an equivalent BP-trained model. Hyperparameters were optimized with Optuna, and consistent early stopping criteria were applied based on validation performance, ensuring all models were optimally tuned before comparison. Results show that MF not only competes with but consistently surpasses BP in classification accuracy on its native MLPs. Its superior generalization stems from converging to a more favorable minimum in the validation loss landscape, challenging the assumption that global optimization is required for state-of-the-art results. Measured at the hardware level using the NVIDIA Management Library (NVML) API, MF reduces energy consumption by up to 41% and shortens training time by up to 34%, translating to a measurably smaller carbon footprint as estimated by CodeCarbon. Beyond this primary result, we present a hardware-level analysis that explains the efficiency gains: exposing FF's architectural inefficiencies, validating MF's computationally lean design, and challenging the assumption that all BP-free methods are inherently more memory-efficient. By documenting the evolution from FF's conceptual groundwork to MF's synthesis of accuracy and sustainability, this work offers a clear, data-driven roadmap for future energy-efficient deep learning.

Supervised open-loop training has been widely adopted for training traffic simulation models; however, it fails to capture the inherently dynamic, multi-agent interactions common in complex driving scenarios. We introduce RLFTSim, a reinforcement-learning-based fine-tuning framework that enhances scenario realism by aligning simulator rollouts with real-world data distributions and provides a method for distilling goal-conditioned controllability in scenario generation. We instantiate RLFTSim on top of a pre-trained simulation model, design a reward that balances fidelity and controllability, and perform comprehensive experiments on the Waymo Open Motion Dataset. Our results show improvements in realism, achieving state-of-the-art performance. Compared with other heuristic search-based fine-tuning methods, RLFTSim requires significantly fewer samples due to a proposed low-variance and dense reward signal, and it directly addresses the realism alignment issue by design. We also demonstrate the effectiveness of our approach for distilling traffic simulation controllability through goal conditioning. The project page is available at https://ehsan-ami.github.io/rlftsim.

Large language models (LLMs) are increasingly used as judges to replace costly human preference labels in pairwise evaluation. Despite their practicality, LLM judges remain prone to miscalibration and systematic biases. This paper proposes SCOPE (Selective Conformal Optimized Pairwise Evaluation), a framework for selective pairwise judging with finite-sample statistical guarantees. Under exchangeability, SCOPE calibrates an acceptance threshold such that the error rate among non-abstained judgments is at most a user-specified level α. To provide SCOPE with a bias-neutral uncertainty signal, we introduce Bidirectional Preference Entropy (BPE), which queries the judge under both response positions, aggregates the implied preference probabilities to enforce invariance to response order, and converts the aggregated probability into an entropy-based uncertainty score. Across MT-Bench, RewardBench, and Chatbot Arena, BPE improves uncertainty quality over standard confidence proxies, providing a stronger selection signal that enables SCOPE to consistently meet the target risk level while retaining good coverage across judge scales. In particular, at α= 0.10, SCOPE consistently satisfies the risk bound across all benchmarks and judge scales (empirical risk approx 0.097 to 0.099), while retaining substantial coverage, reaching 0.89 on RewardBench with Qwen-14B and 0.98 on RewardBench with Qwen-32B. Compared to naïve baselines, SCOPE accepts up to 2.4times more judgments on MT-Bench with Qwen-7B under the same target risk constraint, demonstrating that BPE enables reliable and high-coverage LLM-based evaluation.

Vision-language verifiers and routers must distinguish errors repairable by more reasoning from those caused by visual evidence never reaching the language model. This distinction lacks ground truth because annotators see full-resolution images while models receive preprocessed tensors. We introduce AliasForge to create cases where the relevant fact is provably absent from the interface. Fixed-point resampling makes the pre-rounding resize an exact integer linear map that can send nonzero integer perturbations to zero. Hiding a label-flipping perturbation there produces images with opposite step-correctness labels but bit-identical interface states. Every verifier therefore has the same output law on both members, giving pair-balanced accuracy exactly one half and zero gain from language-side repair. We prove that every fixed-point downscaler has such null vectors and bound their smallest size at the most common ratios, which rules out an 8-bit fit whenever the bound exceeds 255. From the resize configuration alone, a lattice criterion supplies realizable collisions and certifies their absence within the specified construction family. It resolves all 20 screened configurations, 17 as constructible and 3 as non-constructible. We construct certified pairs across three architectures and certify four additional processors, with zero decision-logit gap on all 18 scored pairs and none of the 18 controls. The pairs also screen routers that waste computation on re-attention or further reasoning. On natural items, per-item routing headroom exists, but no tested interface-only router improves over stopping. Our fiber ceiling bounds the headroom recoverable from the interface. Code: https://github.com/KurbanIntelligenceLab/aliasforge.

Large language models (LLMs) are increasingly deployed in multi-turn dialogue settings, but their behavior is still bottlenecked by fixed context windows and naive memory strategies. Replaying the full conversation at every turn is simple but expensive, while static summarization or recency-only heuristics often erase safety-critical user details. We present Adaptive Focus Memory (AFM), a dynamic context manager that assigns each past message one of three fidelity levels -- FULL, COMPRESSED, or PLACEHOLDER -- based on semantic similarity to the current query, half-life recency weighting, and importance classification. AFM packs messages chronologically under a strict token budget, preferring high fidelity for the most relevant turns while aiming to preserve a cheap trace of the dialogue. In a safety-oriented benchmark involving a user with a severe peanut allergy planning a trip to Thailand, AFM retains the allergy across both short and medium-length conversations, matches the safety performance of naive replay, and cuts average token usage by 66% relative to a replay baseline. We release a modular Python implementation of AFM designed for OpenAI-compatible APIs and offline operation, enabling practitioners to reduce inference cost without sacrificing safety or factual continuity in the evaluated scenario.

Fine-tuning large language models (LLMs) improves performance but introduces critical safety vulnerabilities: even minimal harmful data can severely compromise safety measures. We observe that perturbations orthogonal to the alignment direction - defined by weight differences between aligned (safe) and unaligned models - rapidly compromise model safety. In contrast, updates along the alignment direction largely preserve it, revealing the parameter space as a "narrow safety basin". To address this, we propose AsFT (Anchoring Safety in Fine-Tuning) to maintain safety by explicitly constraining update directions during fine-tuning. By penalizing updates orthogonal to the alignment direction, AsFT effectively constrains the model within the "narrow safety basin," thus preserving its inherent safety. Extensive experiments on multiple datasets and models show that AsFT reduces harmful behaviors by up to 7.60%, improves task performance by 3.44%, and consistently outperforms existing methods across multiple tasks.

Large Language Models (LLMs) continue to exhibit vulnerabilities despite deliberate safety alignment efforts, posing significant risks to users and society. To safeguard against the risk of policy-violating content, system-level moderation via external guard models-designed to monitor LLM inputs and outputs and block potentially harmful content-has emerged as a prevalent mitigation strategy. Existing approaches of training guard models rely heavily on extensive human curated datasets and struggle with out-of-distribution threats, such as emerging harmful categories or jailbreak attacks. To address these limitations, we propose RSafe, an adaptive reasoning-based safeguard that conducts guided safety reasoning to provide robust protection within the scope of specified safety policies. RSafe operates in two stages: 1) guided reasoning, where it analyzes safety risks of input content through policy-guided step-by-step reasoning, and 2) reinforced alignment, where rule-based RL optimizes its reasoning paths to align with accurate safety prediction. This two-stage training paradigm enables RSafe to internalize safety principles to generalize safety protection capability over unseen or adversarial safety violation scenarios. During inference, RSafe accepts user-specified safety policies to provide enhanced safeguards tailored to specific safety requirements.

Test-time scaling often uses an external verifier, such as compilers and test cases in coding or trained value functions in robotics applications, to obtain high-quality rollouts. Verifier-free test-time scaling (or VF-TTS) is gaining extensive attention as a mechanism to enhance Large Language Model (LLM) reasoning, primarily because we do not have access to such high-quality verifiers in many real-world applications. Among existing VF-TTS methods, confidence-based VF-TTS methods, which compute and rank rollouts solely by confidence, are particularly promising. Such methods introduce near-zero overhead for sample evaluation and require minimal access to internal model states, making the methods highly flexible across models and tasks. In this paper, we demonstrate a critical limitation of existing confidence-based VF-TTS methods by showing that such methods catastrophically break down on complex tasks. We observe a very interesting phenomenon: uniformly high confidence frequently indicates a failure to explore, favoring confidently wrong answers. To address this, our core insight is that robust cognitive search requires a specific confidence trajectory pattern: such methods perform exploratory branching at the beginning, as manifested by low initial confidence, and converge to a high final confidence solution. To implement this insight, we introduce consilience, a novel selection framework that explicitly evaluates the temporal asymmetry of confidence in reasoning. We operationalize this via a combinatorial metric that actively penalizes high initial confidence while strictly demanding final certainty. Extensive experiments covering both graduate-level mathematics problems and free-form code generation demonstrate that consilience effectively outperforms existing baselines, validating our novel perspective on completion confidence.

Biomedical Foundation Models (FMs) are rapidly transforming AI-enabled healthcare research and entering clinical validation. However, their susceptibility to learning non-biological technical features -- including variations in surgical/endoscopic techniques, laboratory procedures, and scanner hardware -- poses risks for clinical deployment. We present the first systematic investigation of pathology FM robustness to non-biological features. Our work (i) introduces measures to quantify FM robustness, (ii) demonstrates the consequences of limited robustness, and (iii) proposes a framework for FM robustification to mitigate these issues. Specifically, we developed PathoROB, a robustness benchmark with three novel metrics, including the robustness index, and four datasets covering 28 biological classes from 34 medical centers. Our experiments reveal robustness deficits across all 20 evaluated FMs, and substantial robustness differences between them. We found that non-robust FM representations can cause major diagnostic downstream errors and clinical blunders that prevent safe clinical adoption. Using more robust FMs and post-hoc robustification considerably reduced (but did not yet eliminate) the risk of such errors. This work establishes that robustness evaluation is essential for validating pathology FMs before clinical adoption and demonstrates that future FM development must integrate robustness as a core design principle. PathoROB provides a blueprint for assessing robustness across biomedical domains, guiding FM improvement efforts towards more robust, representative, and clinically deployable AI systems that prioritize biological information over technical artifacts.

Large language models increasingly operate over large collections of tools, functions, APIs, and specialized agents. As the candidate action space grows, a function-calling model must process more schemas, consume more prompt tokens, and distinguish among increasingly similar or irrelevant alternatives. We study a complementary systems strategy: reduce the candidate set before language-model inference while leaving the downstream model unchanged. We introduce AgentWeave, a deterministic pre-inference routing layer that constructs a bounded model-visible action space using eligibility, requirement, capability, and routing signals. We evaluate AgentWeave with a frozen BFCL-derived routing-pressure protocol using the public MadeAgents/Hammer2.1-1.5b model. On 48 fresh BFCL V4 multiple-function tasks, AgentWeave achieves 6/48 (12.5%) native BFCL successes, whereas all-tools, deterministic random top-8, and semantic top-8 baselines each achieve 0/48. The paired success difference is +12.5 percentage points with a 10,000-resample paired bootstrap 95% confidence interval of +4.17 to +22.92 points and exact McNemar p=0.03125. Relative to all-tools exposure, AgentWeave presents 70.18% fewer tools, uses 61.70% fewer input tokens, and exhibits 50.95% lower mean local-model latency. The result is deliberately narrow: this is a BFCL-derived routing-pressure study rather than an official full BFCL leaderboard score, and absolute task success remains low. The evidence nevertheless shows that candidate-space construction can materially affect a fixed model's function-calling behavior and motivates evaluating routing as a distinct stage before model reasoning.

While accelerated computing has transformed many domains of computing, its impact on logical reasoning, specifically Boolean satisfiability (SAT), remains limited. State-of-the-art SAT solvers rely heavily on inherently sequential conflict-driven search algorithms that offer powerful heuristics but limit the amount of parallelism that could otherwise enable significantly more scalable SAT solving. Inspired by neural network training, we formulate the SAT problem as a binarized matrix-matrix multiplication layer that could be optimized using a differentiable objective function. Enabled by this encoding, we combine the strengths of parallel differentiable optimization and sequential search to accelerate SAT on a hybrid GPU-CPU system. In this system, the GPUs leverage parallel differentiable solving to rapidly evaluate SAT clauses and use gradients to stochastically explore the solution space and optimize variable assignments. Promising partial assignments generated by the GPUs are post-processed on many CPU threads which exploit conflict-driven sequential search to further traverse the solution subspaces and identify complete assignments. Prototyping the hybrid solver on an NVIDIA DGX GB200 node, our solver achieves runtime speedups up to over 200x when compared to a state-of-the-art CPU-based solver on public satisfiable benchmark problems from the SAT Competition.

Rejection Fine-Tuning (RFT) is a standard method for training LLM agents, where unsuccessful trajectories are discarded from the training set. In the context of SWE-bench tasks, this corresponds to filtering out runs where the submitted patch does not pass the tests. However, this approach discards unresolved trajectories, even though they form a large portion of all trajectories for hard tasks and even then may be partially correct. In this work, we propose Step Rejection Fine-Tuning (SRFT) - a practical way to leverage these unresolved trajectories. For this, we employ a critic LLM to assess the correctness of each step in a trajectory. Consequently, during training, we mask the loss for erroneous steps while retaining them in the context window. This way we ensure the model learns to recover from errors without reproducing them. Evaluation on SWE-bench Verified shows that while RFT improves the resolution rate by 2.4% by excluding unresolved trajectories, SRFT improves it by 3.7% by filtering them instead of discarding completely, reaching the total resolution rate of 32.2%.

Recent 3D face editing methods using masks have produced high-quality edited images by leveraging Neural Radiance Fields (NeRF). Despite their impressive performance, existing methods often provide limited user control due to the use of pre-trained segmentation masks. To utilize masks with a desired layout, an extensive training dataset is required, which is challenging to gather. We present FFaceNeRF, a NeRF-based face editing technique that can overcome the challenge of limited user control due to the use of fixed mask layouts. Our method employs a geometry adapter with feature injection, allowing for effective manipulation of geometry attributes. Additionally, we adopt latent mixing for tri-plane augmentation, which enables training with a few samples. This facilitates rapid model adaptation to desired mask layouts, crucial for applications in fields like personalized medical imaging or creative face editing. Our comparative evaluations demonstrate that FFaceNeRF surpasses existing mask based face editing methods in terms of flexibility, control, and generated image quality, paving the way for future advancements in customized and high-fidelity 3D face editing. The code is available on the {https://kwanyun.github.io/FFaceNeRF_page/{project-page}}.

Current approaches to LLM safety fundamentally rely on a brittle cat-and-mouse game of identifying and blocking known threats via guardrails. We argue for a fresh approach: robust safety comes not from enumerating what is harmful, but from deeply understanding what is safe. We introduce Trust The Typical (T3), a framework that operationalizes this principle by treating safety as an out-of-distribution (OOD) detection problem. T3 learns the distribution of acceptable prompts in a semantic space and flags any significant deviation as a potential threat. Unlike prior methods, it requires no training on harmful examples, yet achieves state-of-the-art performance across 18 benchmarks spanning toxicity, hate speech, jailbreaking, multilingual harms, and over-refusal, reducing false positive rates by up to 40x relative to specialized safety models. A single model trained only on safe English text transfers effectively to diverse domains and over 14 languages without retraining. Finally, we demonstrate production readiness by integrating a GPU-optimized version into vLLM, enabling continuous guardrailing during token generation with less than 6% overhead even under dense evaluation intervals on large-scale workloads.

As large language models (LLMs) become high-privilege agents in risk-sensitive settings, they introduce systemic threats beyond hallucination, where minor compliance errors can cause critical data leaks. However, existing benchmarks focus on rule-based QA, lacking agentic execution modeling, overlooking compliance drift in adversarial interactions, and relying on binary safety metrics that fail to capture behavioral degradation. To bridge these gaps, we present CNFinBench, a comprehensive benchmark spanning 29 subtasks grounded in the triad of expertise, autonomy, and integrity. It assesses domain-specific capabilities through certified regulatory corpora and professional financial tasks, reconstructs end-to-end agent workflows from requirement parsing to tool verification, and simulates multi-turn adversarial attacks that induce behavioral compliance drift. To quantify safety degradation, we introduce the Harmful Instruction Compliance Score (HICS), a multi-dimensional safety metric that integrates risk-type-specific deductions, multi-turn consistency tracking, and severity-adjusted penalty scaling based on fine-grained violation triggers. Evaluations over 22 open-/closed-source models reveal: LLMs perform well in applied tasks yet lack robust rule understanding, suffer a 15.4-point drop single modules to full execution chains, and collapse rapidly in multi-turn attacks, with average violations surging by 172.3% in Round 2. CNFinBench is available at https://cnfinbench.opencompass.org.cn and https://github.com/VertiAIBench/CNFinBench.

Exposure-agnostic video frame interpolation (VFI) is a challenging task that aims to recover sharp, high-frame-rate videos from blurry, low-frame-rate inputs captured under unknown and dynamic exposure conditions. Event cameras are sensors with high temporal resolution, making them especially advantageous for this task. However, existing event-guided methods struggle to produce satisfactory results on severely low-frame-rate blurry videos due to the lack of temporal constraints. In this paper, we introduce a novel event-guided framework for exposure-agnostic VFI, addressing this limitation through two key components: a Target-adaptive Event Sampling (TES) and a Target-adaptive Importance Mapping (TIM). Specifically, TES samples events around the target timestamp and the unknown exposure time to better align them with the corresponding blurry frames. TIM then generates an importance map that considers the temporal proximity and spatial relevance of consecutive features to the target. Guided by this map, our framework adaptively blends consecutive features, allowing temporally aligned features to serve as the primary cues while spatially relevant ones offer complementary support. Extensive experiments on both synthetic and real-world datasets demonstrate the effectiveness of our approach in exposure-agnostic VFI scenarios.

Data-driven modeling of fluid dynamics has advanced rapidly with neural PDE solvers, yet a fair and strong benchmark remains fragmented due to the absence of unified PDE datasets and standardized evaluation protocols. Although architectural innovations are abundant, fair assessment is further impeded by the lack of clear disentanglement between spatial, temporal and loss modules. In this paper, we introduce FD-Bench, the first fair, modular, comprehensive and reproducible benchmark for data-driven fluid simulation. FD-Bench systematically evaluates 85 baseline models across 10 representative flow scenarios under a unified experimental setup. It provides four key contributions: (1) a modular design enabling fair comparisons across spatial, temporal, and loss function modules; (2) the first systematic framework for direct comparison with traditional numerical solvers; (3) fine-grained generalization analysis across resolutions, initial conditions, and temporal windows; and (4) a user-friendly, extensible codebase to support future research. Through rigorous empirical studies, FD-Bench establishes the most comprehensive leaderboard to date, resolving long-standing issues in reproducibility and comparability, and laying a foundation for robust evaluation of future data-driven fluid models. The code is open-sourced at https://anonymous.4open.science/r/FD-Bench-15BC.

Scientists often infer abstract procedures from specific instances of problems and use the abstractions to generate new, related instances. For example, programs encoding the formal rules and properties of a system have been useful in fields ranging from RL (procedural environments) to physics (simulation engines). These programs can be seen as functions which execute to different outputs based on their parameterizations (e.g., gridworld configuration or initial physical conditions). We introduce the term EFA (Executable Functional Abstraction) to denote such programs for math problems. EFA-like constructs have been shown to be useful for math reasoning as problem generators for stress-testing models. However, prior work has been limited to abstractions for grade-school math (whose simple rules are easy to encode in programs), while generating EFAs for advanced math has thus far required human engineering. We explore the automatic construction of EFAs for advanced math problems. We operationalize the task of automatically constructing EFAs as a program synthesis task, and develop EFAGen, which conditions an LLM on a seed math problem and its step-by-step solution to generate candidate EFA programs that are faithful to the generalized problem and solution class underlying the seed problem. Furthermore, we formalize properties any valid EFA must possess in terms of executable unit tests, and show how the tests can be used as verifiable rewards to train LLMs to become better writers of EFAs. We demonstrate that EFAs constructed by EFAGen behave rationally by remaining faithful to seed problems, produce learnable problem variations, and that EFAGen can infer EFAs across multiple diverse sources of competition-level math problems. Finally, we show downstream uses of model-written EFAs e.g. finding problem variations that are harder or easier for a learner to solve, as well as data generation.

Fine-tuning-as-a-Service (FaaS) enables personalization of large language models (LLMs), but it can weaken safety-alignment under harmful fine-tuning attacks. Recent work has shown that activating harmful-behavior modules during fine-tuning can prevent models from learning undesired behaviors, but its mechanism remains unclear. In this paper, we revisit temporary jailbreaking as a defense against harmful fine-tuning and provide a gradient-level analysis showing that it saturates safety-degrading gradients while preserving benign task-relevant gradients. Based on this insight, we propose a Buffer-and-Reinforce fine-tuning framework that buffers harmful updates during user fine-tuning and reinforces safety after adaptation. Specifically, BufferLoRA induces temporary jailbreaking as a removable adapter to reduce harmful updates during user fine-tuning. After adaptation, ReinforceLoRA, trained to recover refusal behavior under the temporarily jailbroken state, is integrated with UserLoRA via QR decomposition-based merging to reinforce safety while preserving user-task performance. Extensive experiments show that our framework achieves superior safety and utility with no additional safety data during user fine-tuning and minimal computational cost.

Sequential trial emulation (STE) estimates the effect of a sustained treatment by stacking nested emulated trials with inverse-probability weighting. Additive-hazards STE estimators of the marginal risk difference recommend the nonparametric bootstrap without evaluating its coverage. Using a correctly-specifiable mechanism (up to a small, disclosed residual), we compare analytic and bootstrap standard errors for both estimands. Exploiting the closed-form linearity of the additive-hazards estimating equation, we derive the influence functions and prove the default row-level robust variance inconsistent for the marginal risk-difference curve, and show the same failure empirically for the constant hazard difference: the row-level variance omits a within-subject cross-trial covariance that is positive under a sign condition we verify across our mechanisms, and is anticonservative at every horizon except the first - only there, where the covariance is zero, is the row-level standard error unimpaired. The subject-clustered variance and multiplier bootstrap are consistent for the fixed-weight linearisation and support simultaneous confidence bands, whose measured coverage is 0.88. Across our simulations the model-based and row-level robust intervals are anticonservative and worsen with sample size, coverage falling to 0.71 at n=5000; clustering leaves the constant-hazard-difference coverage near 0.86 at n=5000, and the multiplier bootstrap leaves the risk-difference-curve coverage near 0.90 (0.86 at the longest horizon). The STE constant hazard difference is a design-weighted summary of a time-varying effect, dependent on the trial structure. We illustrate on the Stanford heart transplant data and provide them in the steCI R package.

We examine the connections between deterministic, complete, and general global optimisation of continuous functions and a general concept of regression from the perspective of constructive type theory via the concept of 'searchability'. We see how the property of convergence of global optimisation is a straightforward consequence of searchability. The abstract setting allows us to generalise searchability and continuity to higher-order functions, so that we can formulate novel convergence criteria for regression, derived from the convergence of global optimisation. All the theory and the motivating examples are fully formalised in the proof assistant Agda.

We introduce SATBench, a benchmark for evaluating the logical reasoning capabilities of large language models (LLMs) through logical puzzles derived from Boolean satisfiability (SAT) problems. Unlike prior work that focuses on inference rule-based reasoning, which often involves deducing conclusions from a set of premises, our approach leverages the search-based nature of SAT problems, where the objective is to find a solution that fulfills a specified set of logical constraints. Each instance in SATBench is generated from a SAT formula, then translated into a story context and conditions using LLMs. The generation process is fully automated and allows for adjustable difficulty by varying the number of clauses. All 2100 puzzles are validated through both LLM-assisted and solver-based consistency checks, with human validation on a subset. Experimental results show that even the strongest model, o4-mini, achieves only 65.0% accuracy on hard UNSAT problems, close to the random baseline of 50%. SATBench exposes fundamental limitations in the search-based logical reasoning abilities of current LLMs and provides a scalable testbed for future research in logical reasoning.

Working agents need to read diverse files, coordinate tools, and produce deliverables. Training such agents requires tasks built on many real files with verifiable results, but few pipelines exist to synthesize this kind of data. Existing pipelines either generate files with models, which lack realism and diversity, or build tasks on real files without task-specific verifiers, leaving result quality unchecked. We introduce GraphForge, an evidence-graph based framework that grounds both the task and its verification in real files. Starting from occupation-grounded seeds for controlled diversity, GraphForge assembles a workspace of real files for each seed and builds an evidence graph over their relations. Since the task statement and rubrics are both derived from this graph, task requirements are backed by the workspace files and each criterion is anchored to the files needed to verify it. An initial rollout further tests executability, and a revision agent repairs the task and rubrics against the original files before trajectories are collected. Fine-tuning Qwen3.6-27B on 2,169 GraphForge trajectories brings GDPVal to 1445.7 (+65.7) under OpenHands, and Workspace-Bench-Lite and SpreadsheetBench II to 63.7 (+7.7) and 24.0 (+13.7) under Claude Code. Rejection fine-tuning on the SFT model's own rollouts, with candidates selected by the evidence-anchored rubrics, yields further improvements on all three benchmarks, suggesting that the rubrics provide a useful selection signal. The data and models are available.

Outer-learning algorithms use infinitesimal sensitivities to propose finite changes to initialization or training parameters. For hard-ReLU training, the derivative of the finite program and the derivative of its flow limit do not by themselves specify the response at a chosen radius. We characterize the intervening regime in which the perturbation radius is proportional to the GD step. Integer event rounding then survives at leading order: smooth Euler bias shifts each discrete phase, and upstream rounding moves downstream branch boundaries. We derive the crossing indices and a uniform endpoint expansion for finitely many separated transverse events in piecewise-C^2 dynamics, away from recursive phase boundaries. In contractive affine regions, an explicit remainder and complete branch verification certify finite candidate comparisons. Scalar phase frequencies and a coupled feedback ablation test the mechanism; frozen nonlinear-network experiments show radius-dependent prediction accuracy, including incomplete branch matches and failed-word tails. Together with local AD and uniform flow consistency, the result identifies sufficient response regimes: differentiating training is a choice of perturbation resolution as well as a choice of derivative.

Instance-specific algorithm configuration and algorithm portfolios have been shown to offer significant improvements over single algorithm approaches in a variety of application domains. In the SAT and CSP domains algorithm portfolios have consistently dominated the main competitions in these fields for the past five years. For a portfolio approach to be effective there are two crucial conditions that must be met. First, there needs to be a collection of complementary solvers with which to make a portfolio. Second, there must be a collection of problem features that can accurately identify structural differences between instances. This paper focuses on the latter issue: feature representation, because, unlike SAT, not every problem has well-studied features. We employ the well-known SATzilla feature set, but compute alternative sets on different SAT encodings of CSPs. We show that regardless of what encoding is used to convert the instances, adequate structural information is maintained to differentiate between problem instances, and that this can be exploited to make an effective portfolio-based CSP solver.

Structured reasoning requires making and revising interdependent decisions to reach a globally consistent solution. Existing architectures struggle with this: autoregressive models commit sequentially and cannot revise earlier decisions, while masked diffusion models often require careful decoding schemes to coordinate interdependent predictions. We introduce Flow Reasoning Models (FRMs), a novel framework for structured reasoning that adapts continuous flows over discrete structured outputs with a simple recurrent refinement mechanism. By self-conditioning a flow model on its own past outputs, we turn one-shot denoising into iterative solution refinement. This lets FRMs make and revise decisions in parallel, efficiently coordinating interdependent choices across solutions. Yet conventional self-conditioning becomes unreliable at greater recurrent depth due to exposure bias between one-step training predictions and recursively generated inference states. We address this mismatch with Fixed-Point Forcing (FPF), which trains FRMs on states produced by their own inference dynamics while preserving the standard flow-matching objective. FRMs achieve solve rates of 99.5%, 100.0%, and 99.9% on Sudoku-Extreme, Zebra, and Maze-Unique, respectively. On Sudoku-Extreme, FRMs achieve higher peak accuracy than the evaluated masked-diffusion and specialized reasoning baselines while remaining highly compute-efficient, matching the next-best method's 98.7% peak solve rate with 44times fewer inference FLOPs.

This survey delves into the realm of Parameter-Efficient Fine-Tuning (PEFT) within the context of Foundation Models (FMs). PEFT, a cost-effective fine-tuning technique, minimizes parameters and computational complexity while striving for optimal downstream task performance. FMs, like ChatGPT, DALL-E, and LLaVA specialize in language understanding, generative tasks, and multimodal tasks, trained on diverse datasets spanning text, images, and videos. The diversity of FMs guides various adaptation strategies for PEFT. Therefore, this survey aims to provide a comprehensive overview of PEFT techniques applied to diverse FMs and address critical gaps in understanding the techniques, trends, and applications. We start by providing a detailed development of FMs and PEFT. Subsequently, we systematically review the key categories and core mechanisms of PEFT across diverse FMs to offer a comprehensive understanding of trends. We also explore the most recent applications across various FMs to demonstrate the versatility of PEFT, shedding light on the integration of systematic PEFT methods with a range of FMs. Furthermore, we identify potential research and development directions for improving PEFTs in the future. This survey provides a valuable resource for both newcomers and experts seeking to understand and use the power of PEFT across FMs. All reviewed papers are listed at https://github.com/THUDM/Awesome-Parameter-Efficient-Fine-Tuning-for-Foundation-Models.

Safety heads are lightweight classifiers attached to pretrained language models for flagging harmful inputs before generation. Their empirical detection performance has been studied, but their formal robustness properties remain largely unexplored. We ask when a State Space Model (SSM)-based safety head can be certified to produce the same prediction for all inputs within a bounded embedding-space perturbation. We prove that the answer turns on a single condition: the l_infty norm of the state transition matrix must satisfy A_infty<1 (the contraction condition), which enables exact interval bound propagation (IBP) certification for linear time-invariant classifiers. When the contraction condition holds, the reachable output interval has bounded steady-state width and examples can be certified as robustly classified. When it fails, the interval grows exponentially with sequence length and certification is impossible at any practical perturbation radius. We enforce contraction with a hinge penalty and show on toxic comment data that certified fraction improves from 41\% to 59\%, with a sharp empirical phase transition at A_infty=1 matching the theory. Applying a contraction-regularized S4 head to jailbreak detection on JailbreakBench, we achieve a zero-shot transfer to AdvBench (DR=0.994) and HarmBench (DR=0.988). A logistic regression on mean-pooled Mamba-130M embeddings matches or exceeds the S4 head on every detection metric, confirming that harmful intent is already linearly separable in the embedding space. The S4 safety head's contribution is not superior discrimination but the formal certification that no probe-based approach provides.

The increasing computational demands of foundation models have spurred research into low-precision training, with 4-bit floating-point (FP4) formats emerging as a frontier for maximizing hardware throughput. While numerous techniques have been proposed to stabilize FP4 training, they often present isolated solutions with varying, and not always clear, computational overheads. This paper aims to provide a unified view of the design space of FP4 training. We introduce a comprehensive, quantisation gradient-based framework for microscaling quantization that allows for a theoretical analysis of the computational costs associated with different stabilization methods on both the forward and backward passes. Using a simulator built on this framework, we conduct an extensive empirical study across a wide range of machine learning tasks, including regression, image classification, diffusion models, and language models. By systematically evaluating thousands of combinations of techniques, such as novel gradient approximations, rounding strategies, and scaling methods, we identify which configurations offer the most favourable performance-to-overhead trade-off. We find that the techniques enabling the best trade-off involve carefully combining Hadamard transformations, tensor scaling and stochastic rounding. We further find that using UE5M3 as a scaling factor potentially offers a good compromise between range and precision with manageable computational overhead.