Daily Papers

Language model agents often appear capable of self-recovery after failing tool call executions, yet this behavior lacks a formal explanation. We present a predictive theory that resolves this gap by showing that recoverability follows a measurable law. To elaborate, we formalize recoverability through Expected Recovery Regret (ERR), which quantifies the deviation of a recovery policy from the optimal one under stochastic execution noise, and derive a first-order relationship between ERR and an empirical observable quantity, the Efficiency Score (ES). This yields a falsifiable first-order quantitative law of recovery dynamics in tool-using agents. We empirically validate the law across five tool-use benchmarks spanning controlled perturbations, diagnostic reasoning, and real-world APIs. Across model scales, perturbation regimes, and recovery horizons, predicted regret under the ERR-ES law closely matched observed post-failure regret measured from Monte Carlo rollouts, within delta less than or equal to 0.05. Our results reveal that recoverability is not an artifact of model scale or architecture, but a governed property of interaction dynamics, providing a theoretical foundation for execution-level robustness in language agents.

Existing guardrail systems for large language model agents operate as binary classifiers that block unsafe content, leaving organizations to discard failing outputs and retry from scratch. We introduce RAIL Guard, a closed-loop responsible AI pipeline that evaluates LLM outputs across eight measurable dimensions and iteratively remediates failing outputs through an evaluate-rewrite-reevaluate loop. We evaluate the pipeline across three experiments on four frontier LLMs and 4,276 content outputs plus 6,400 agent tool-call scenarios. Closed-loop remediation achieves 96.9% convergence versus 49.1% for block-and-retry, though the highest-convergence method reduces utility by 22.3%; feedback-driven self-repair achieves 86.6% convergence on fixable dimensions with no significant utility loss (p = 0.177). Pre-tool-call evaluation reduces unsafe agent executions by 33% (p = 0.007) with zero impact on task completion. We identify a key distinction between fixable dimensions that respond to remediation and structural dimensions (Transparency at 93.0%, Accountability at 92.8%, and Inclusivity at 82.5% failure) that require architectural rather than algorithmic solutions. The system is available as open-source SDKs.

Every agent interaction generates a next-state signal, namely the user reply, tool output, terminal or GUI state change that follows each action, yet no existing agentic RL system recovers it as a live, online learning source. We present OpenClaw-RL, a framework built on a simple observation: next-state signals are universal, and policy can learn from all of them simultaneously. Personal conversations, terminal executions, GUI interactions, SWE tasks, and tool-call traces are not separate training problems. They are all interactions that can be used to train the same policy in the same loop. Next-state signals encode two forms of information: evaluative signals, which indicate how well the action performed and are extracted as scalar rewards via a PRM judge; and directive signals, which indicate how the action should have been different and are recovered through Hindsight-Guided On-Policy Distillation (OPD). We extract textual hints from the next state, construct an enhanced teacher context, and provide token-level directional advantage supervision that is richer than any scalar reward. Due to the asynchronous design, the model serves live requests, the PRM judges ongoing interactions, and the trainer updates the policy at the same time, with zero coordination overhead between them. Applied to personal agents, OpenClaw-RL enables an agent to improve simply by being used, recovering conversational signals from user re-queries, corrections, and explicit feedback. Applied to general agents, the same infrastructure supports scalable RL across terminal, GUI, SWE, and tool-call settings, where we additionally demonstrate the utility of process rewards. Code: https://github.com/Gen-Verse/OpenClaw-RL

Frontier models can control robots, but reasoning through every reach, grasp, and retreat makes manipulation slow and token-intensive. We revisit code as policy with a different division of labor: models build executable tools, code handles multi-phase motions, and models decide what to do next. We introduce URAI (Universal Robot-Agent Interface), which couples a programming agent that constructs robot tools with an execution agent that uses them in a feedback loop. The programming agent writes reusable and task-specific tools from task intent and refines them through execution feedback and human guidance. The execution agent selects and parameterizes these tools from current observations; each call runs a complete motion locally before returning control to the agent. Unlike delegating subsequent decisions to a generated program, this design retains model-level decision-making between tool executions. Validated tool revisions persist across episodes without updating foundation-model weights, and a shared GUI and API make the same tools available to humans and agents. Across five RoboDojo tasks and four frozen execution agents, URAI raises aggregate success from 18.0% to 53.0% relative to direct fingertip control, with the largest gain on Swap Blocks; with the same tools, a program written in advance reaches only 24% against 56% for two agents deciding after each call. Three of the four agents also finish episodes 1.3-1.5 times faster with 1.5-1.7 times fewer execution-agent output tokens; DeepSeek-V4-Flash's cost barely changes. We further evaluate URAI on seven real-world AgileX dual-arm tasks, spanning object manipulation, cloth folding, and human-interactive tic-tac-toe. URAI connects the coding and decision-making capabilities of frontier agents, organizing robot control around reusable tools that agents can both invoke and revise.

Tool-using LLM agents increasingly read untrusted content while holding side-effecting tools such as payments, email, CRM, and infrastructure APIs, yet common framework defaults still conflate tool exposure with authorization. We audit whether LangChain/LangGraph, LlamaIndex, and the Stripe Agent Toolkit re-authorize each model-emitted call, with concrete argument values, before execution. Across pinned public-source commits, all three provide capability gating by default, but none provides a deterministic fail-closed per-call value authorization gate by default. We introduce ScopeGate, a five-stage PDP/PEP for agent tool calls: scope, authorization, money ceiling, idempotency, and default deny. Evaluation shows the identical unauthorized payout call executes under LangChain's default dispatch (with a companion LlamaIndex PoC) but is denied by ScopeGate; the tested control reports 0/48 static bypasses, 0/29 unauthorized attempts (40-iteration adaptive run), 0/10 benign false-denies, and Latam-GPT payment-agent containment at 10/10. ASR denotes attempted unauthorized action, containment is not a cure, deployment-tier claims are inference over measured model classes, and no CVE is asserted.

LLMs' capabilities are enhanced by using function calls to integrate various data sources or API results into the context window. Typical tools include search, web crawlers, maps, financial data, file systems, and browser usage, etc. Integrating these data sources or functions requires a standardized method. The Model Context Protocol (MCP) provides a standardized way to supply context to LLMs. However, the evaluation of LLMs and AI Agents' MCP tool use abilities suffer from several issues. First, there's a lack of comprehensive datasets or benchmarks to evaluate various MCP tools. Second, the diverse formats of response from MCP tool call execution further increase the difficulty of evaluation. Additionally, unlike existing tool-use benchmarks with high success rates in functions like programming and math functions, the success rate of real-world MCP tool is not guaranteed and varies across different MCP servers. Furthermore, the LLMs' context window also limits the number of available tools that can be called in a single run, because the textual descriptions of tool and the parameters have long token length for an LLM to process all at once. To help address the challenges of evaluating LLMs' performance on calling MCP tools, we propose MCPToolBench++, a large-scale, multi-domain AI Agent tool use benchmark. As of July 2025, this benchmark is build upon marketplace of over 4k MCP servers from more than 40 categories, collected from the MCP marketplaces and GitHub communities. The datasets consist of both single-step and multi-step tool calls across different categories. We evaluated SOTA LLMs with agentic abilities on this benchmark and reported the results.

AI agents increasingly assist with financial research, yet no benchmark evaluates their ability to retrieve specific numeric values from structured databases. We introduce FinRetrieval, a benchmark of 500 financial retrieval questions with ground truth answers, agent responses from 14 configurations across three frontier providers (Anthropic, OpenAI, Google), and complete tool call execution traces. Our evaluation reveals that tool availability dominates performance: Claude Opus achieves 90.8% accuracy with structured data APIs but only 19.8% with web search alone--a 71 percentage point gap that exceeds other providers by 3-4x. We find that reasoning mode benefits vary inversely with base capability (+9.0pp for OpenAI vs +2.8pp for Claude), explained by differences in base-mode tool utilization rather than reasoning ability. Geographic performance gaps (5.6pp US advantage) stem from fiscal year naming conventions, not model limitations. We release the dataset, evaluation code, and tool traces to enable research on financial AI systems.

The ability to use tools is fundamental for large language model (LLM) agents. Given a task, existing systems use LLMs to plan and generate tool calls, which are executed by real-world tools to complete the task. However, tool calls are prone to errors because they are derived merely from LLM intrinsic capabilities. What is more, while it is useful to let LLMs iteratively refine the tool-call sequence using execution results from real tools, this process can be expensive and lead to unsafe results. To improve LLM tool calls and address issues caused by using real tools for refinement, we introduce Gecko, a comprehensive environment that simulates tool responses using a combination of rules and LLMs. Specifically, Gecko checks the validity of tool calls including input arguments and tool names, synthesizes reasonable responses that adhere to the output schema, and assesses whether all task objectives have been achieved. These three types of feedback provided by Gecko allow LLMs to refine their tool calls, forming a simple yet effective test-time scaling method named GATS. On BFCLv3 and τ^2-bench, GATS consistently improves the tool calling performance of various LLMs including GPT-4o, GPT-5, and Gemini-3.0-pro. We further discuss working mechanisms of our method and share future possibilities.

AI agents increasingly act through external tools: they query databases, execute shell commands, read and write files, and send network requests. Yet in most current agent stacks, model-generated tool calls are handed to the execution layer with no framework-agnostic control point in between. Post-execution observability can record these actions, but it cannot stop them before side effects occur. We present AEGIS, a pre-execution firewall and audit layer for AI agents. AEGIS interposes on the tool-execution path and applies a three-stage pipeline: (i) deep string extraction from tool arguments, (ii) content-first risk scanning, and (iii) composable policy validation. High-risk calls can be held for human approval, and all decisions are recorded in a tamper-evident audit trail based on Ed25519 signatures and SHA-256 hash chaining. In the current implementation, AEGIS supports 14 agent frameworks across Python, JavaScript, and Go with lightweight integration. On a curated suite of 48 attackinstances, AEGIS blocks all attacks in the suite before execution; on 500 benign tool calls, it yields a 1.2% false positive rate; and across 1,000 consecutive interceptions, it adds 8.3 ms median latency. The live demo will show end-to-end interception of benign, malicious, and human-escalated tool calls, allowing attendees to observe real-time blocking, approval workflows, and audit-trail generation. These results suggest that pre-execution mediation for AI agents can be practical, low-overhead, and directly deployable.

Deciding whether to call a tool is a core competence of an LLM agent, and a costly one to get wrong: needless calls add latency, accrue cost, and may trigger irreversible side effects, while missing calls leave the model confidently wrong on questions it could only answer through tool-calls. Models manage this balance poorly, both over-using and under-using tools. Existing methods such as post-training and prompt engineering are expensive and difficult to modify at inference time. We show that whether an instruction-tuned model calls a tool can be controlled by a single linear direction in its residual stream, extracted without any training from the model's own tool-use preference signal and turned into an inference-time intervention with no prompt change. Adding the direction with strength α moves the call rate monotonically from near 0% to over 90% while keeping calls well-formed. The steering works in both directions: dialing it down suppresses calls, and dialing it up induces new calls that land precisely on the questions the model cannot answer from its own knowledge. We also show that the direction generalizes to unseen tools with strength comparable to each tool's own direction and without favoring any specific tool choice. With live tool execution, a single sweep of the steering traces a cost/accuracy Pareto frontier and nearly doubles open-domain QA accuracy (0.29 ! rightarrow ! 0.56); the same recipe transfers across a diverse range of models spanning dense, MoE, and multimodal architectures, without any training. Our code is publicly available at https://github.com/YuqiChen4188/Steering-Tool-Use-Propensity.

Large language models (LLMs) can call tools effectively, yet they remain brittle in multi-turn execution: following a tool call error, smaller models often degenerate into repetitive invalid re-invocations, failing to interpret error feedback and self-correct. This brittleness hinders reliable real-world deployment, where the execution errors are inherently inevitable during tool interaction procedures. We identify a key limitation of current approaches: standard reinforcement learning (RL) treats errors as sparse negative rewards, providing no guidance on how to recover, while pre-collected synthetic error-correction datasets suffer from distribution mismatch with the model's on-policy error modes. To bridge this gap, we propose Fission-GRPO, a framework that converts execution errors into corrective supervision within the RL training loop. Our core mechanism fissions each failed trajectory into a new training instance by augmenting it with diagnostic feedback from a finetuned Error Simulator, then resampling recovery rollouts on-policy. This enables the model to learn from the precise errors it makes during exploration, rather than from static, pre-collected error cases. On the BFCL v4 Multi-Turn, Fission-GRPO improves the error recovery rate of Qwen3-8B by 5.7% absolute, crucially, yielding a 4% overall accuracy gain (42.75% to 46.75%) over GRPO and outperforming specialized tool-use agents.

AI agents today have passwords but no permission slips. They execute tool calls (fund transfers, database queries, shell commands, sub-agent delegation) with no standard mechanism to enforce authorization before the action executes. Current safety architectures rely on model alignment (probabilistic, training-time) and post-hoc evaluation (retrospective, batch). Neither provides deterministic, policy-based enforcement at the individual tool call level. We characterize this gap as the pre-action authorization problem and present the Open Agent Passport (OAP), an open specification and reference implementation that intercepts tool calls synchronously before execution, evaluates them against a declarative policy, and produces a cryptographically signed audit record. OAP enforces authorization decisions in a measured median of 53 ms (N=1,000). In a live adversarial testbed (4,437 authorization decisions across 1,151 sessions, $5,000 bounty), social engineering succeeded against the model 74.6% of the time under a permissive policy; under a restrictive OAP policy, a comparable population of attackers achieved a 0% success rate across 879 attempts. We distinguish pre-action authorization from sandboxed execution (contains blast radius but does not prevent unauthorized actions) and model-based screening (probabilistic), and show they are complementary. The same infrastructure that enforces security constraints (spending limits, capability scoping) also enforces quality gates, operational contracts, and compliance controls. The specification is released under Apache 2.0 (DOI: 10.5281/zenodo.18901596).

LLM agents that invoke privileged tools are vulnerable to indirect prompt injection (IPI), in which adversarial instructions embedded in retrieved data hijack the agent's actions. A growing body of work evaluates defenses against IPI, but the validity of that evaluation is rarely examined. We audit an IPI benchmark and its harness and identify four defect classes -- silent payload non-delivery, attack success scored by tool identity rather than arguments, false-rejection rate conflated with model incapacity, and the absence of an audit trail -- each of which yields a plausible, publishable, and incorrect number. We quantify the distortion by re-scoring identical execution traces under the defective and corrected definitions: on real agent behaviour, the tool-identity scorer reports a 21.7% attack-success rate where the true argument-level rate is 1.2%. In the sharpest case, an open model previously reported at 62.8% registers 0% under the corrected harness -- the prior figure largely an artifact of undelivered payloads and identity-level scoring. We release a harness whose construction makes each defect unrepresentable -- machine-checkable payload placement, argument-level attacker predicates, per-scenario environments, and mandatory trace persistence -- and use it to report three quantities the field does not: whether a compromised agent discloses the attack, the full security/utility operating curve of an LLM-judge defense, and tool-calling capability disentangled from defensive over-blocking. A corrected harness further overturns a reported "capability barrier": a model deemed incapable of tool use is in fact fully capable, its earlier result an artifact of environment mismatch. We argue that evaluation validity is a prerequisite for, not a footnote to, defense claims in agentic security, and provide an instrument that enforces it.

Tool calling, invoking external tools on demand, is central to agentic LLMs, yet the mechanism that decides whether a model calls a tool or responds directly remains poorly understood. Agentic prompts are long and heavily scaffolded, combining role instructions, tool schemas, format templates, and the user's request across hundreds of tokens, creating a noisy, highly entangled context in which no single controllable variable for mechanistic analysis is obvious. To obtain such a variable, we propose a method that converts complex agentic prompts into minimal contrastive pairs in which a single request verb determines the tool-call decision: replacing an execution-verb (e.g., write) with an analysis-verb (e.g., discuss) reliably flips the decision, suggesting it is mediated by a compact internal state. We construct 500 such paired prompts across Python, Java, and C++ (300 for mechanistic analysis, 200 held out for evaluation). We trace the decision to a vector, μ_Δ, that is both causally necessary and sufficient and generalizes beyond the discovery prompts to native multi-turn τ^2-Bench trajectories and verb-free requests. Behavioral ablations show that the scaffold establishes a tool-call prior; Transcoder decomposition then reveals that analysis verbs suppress this prior through features signaling that tool use is unnecessary, whereas execution verbs largely leave it intact. Downstream scaffold-reading attention heads and MLP features read out the resulting state, and the same mechanism recurs across seven models from the Qwen, Mistral, and Granite families. Our code is available at https://github.com/XijieGo/MI4ToolCalling.

Tool-using voice agents often leave users waiting after speech ends, even when actionable information arrives earlier in the request. Speculative approaches begin work during speech, but chunk-bounded or interrupt-on-update generation can truncate a tool call before its arguments are complete. This couples computation time to speech updates, limiting useful work completed in advance. We introduce Heartbeat Thinking, which handles updated input through new Thinker invocations while allowing ongoing invocations and dispatched tools to finish. Periodic invocations read the latest partial transcript and a shared record of completed reasoning and tool results. These results help resolve missing arguments and initiate dependent calls, allowing preparation to progress across speech updates. Across SpeechFCEval, FDBench v3, and AudioCRAG, Heartbeat improves aggregate speculative tool coverage or retrieval reuse over a SHANKS-style windowed baseline, with benchmark-dependent effects on final task quality. On FDBench v3, it increases tool coverage by 16 percentage points and reduces mean final-response latency by 36.4\%. The results show that heartbeat thinking paradigm preserving ongoing computation during speech can turn listening time into reusable preparation for faster and more capable voice-agent responses.

Tool use enables large language models (LLMs) to access external information, invoke software systems, and act in digital environments beyond what can be solved from model parameters alone. Early research mainly studied whether a model could select and execute a correct single tool call. As agent systems evolve, however, the central problem has shifted from isolated invocation to multi-tool orchestration over long trajectories with intermediate state, execution feedback, changing environments, and practical constraints such as safety, cost, and verifiability. We comprehensively review recent progress in multi-tool LLM agents and analyzes the state of the art in this rapidly developing area. First, we unify task formulations and distinguish single-call tool use from long-horizon orchestration. Then, we organize the literature around six core dimensions: inference-time planning and execution, training and trajectory construction, safety and control, efficiency under resource constraints, capability completeness in open environments, and benchmark design and evaluation. We further summarize representative applications in software engineering, enterprise workflows, graphical user interfaces, and mobile systems. Finally, we discuss major challenges and outline future directions for building reliable, scalable, and verifiable multi-tool agents.

Training capable OS agents requires data that simultaneously captures structured user intents, multi-turn task delegation, and grounded tool execution--properties absent from existing datasets. We propose ISE (Intent -> Simulate -> Execute), a three-stage synthesis paradigm that addresses these gaps jointly. Stage 1 constructs roughly 50000 structured intents via a 4D framework (Persona x Domain x Task x Complexity); after deduplication the pool contains 43956 unique intents and attains a Vendi Score of 61.57 over the entire pool on mpnet-base-v2 embeddings (cosine kernel, q=1). Stage 2 drives multi-turn user-agent interaction through a role-locked user simulator that grounds each user turn in actual execution outcomes, producing 23132 complete trajectories averaging 8.12 user turns and 68.24 total dialogue turns. Stage 3 runs every tool call inside a live, isolated OS workspace, generating authentic failure-recovery dynamics instead of simulated responses. Fine-tuning on ISETrace improves ClawEval pass@1 from 19.3 to 37.7 using Qwen3-8B on agent tool-use tasks with a standard protocol. This result outperforms zero-shot GPT-4o and the larger Qwen3-32B base model which is four times bigger. An ablation on Stage 2 proves multi-turn simulation brings a large portion of the performance gain. We release all source code and dataset at https://github.com/Valiere01/ISE-Trace.

As LLM agents take on offensive security work, a single out-of-scope tool call can breach a client's engagement boundary, disrupt production, or void a bug-bounty finding. Unlike a fixed safety policy, the boundary that matters is declared in the user's request and must be inferred from intent. That challenge is sharpened by the adversarial nature of offensive security: the same tool call is in or out of scope depending not on the action itself but on the target it touches and the context in which it runs, which no fixed policy can enumerate in advance. We study pre-execution gating: a cheap, trusted LLM judge inspects each call proposed by a strong, swappable agent, and accepts or rejects it before it runs. We introduce ScopeJudge, a benchmark of 4,897 tool calls (7.7% scope violations) from agent trajectories on tasks engineered to tempt agents out of scope and labeled at the call level by professional penetration testers, with substantial inter-grader agreement (Fleiss kappa = 0.64) that sets an expert agreement reference point of F1 = 0.78. We evaluate eight judge models under five transcript strategies, varying how much context the judge sees, from the static policy alone to the full raw transcript, and chart the resulting cost-accuracy Pareto frontier. We find that a static policy is structurally insufficient for scope enforcement: blind to the user's request, judge recall collapses to near zero, confirming that scope lives in the request and that request-conditioned monitoring is necessary. Because a missed violation costs more than a spurious rejection, we report precision, recall, and F1 separately and recommend two operating points: a cost-sensitive configuration and a recall-first one for high-stakes deployments. We release the ScopeJudge dataset to support real-time monitoring and scalable oversight of autonomous security agents.

Existing agent benchmarks mainly evaluate final task success or tool-call correctness, providing limited insight into whether agents can reliably diagnose and recover from intermediate execution failures. This limitation becomes particularly critical in multi-turn parallel tool-use scenarios, where errors may propagate across dependent branches and trigger cascading failures. We introduce ParaRecover, a process-level benchmark for evaluating error localization and recovery in multi-turn parallel tool-use agents. Built upon a fine-grained taxonomy of 14 error types covering planning dependencies, tool selection, and argument matching, the benchmark comprises 10,626 instances spanning two difficulty levels. To enable finegrained, process-oriented evaluation, we further propose the SDE rubric, which measures structural integrity, diagnostic reasoning, and evolutionary strategy during agent execution.Experiments across more than ten mainstream LLMs reveal that even state-of-the-art models still struggle with multi-turn error propagation,implicit tool-use failures, and precise replanning. Moreover, we demonstrate that the SDE rubric provides effective supervision signals for improving agents' reflective recovery capabilities. Our data and code are available at https://github.com/gbw206/ParaRecover.

Large language models (LLMs) increasingly act as autonomous agents that must decide when to answer directly vs. when to invoke external tools. Prior work studying adaptive tool use has largely treated tool necessity as a model-agnostic property, annotated by human or LLM judge, and mostly cover cases where the answer is obvious (e.g., fetching the weather vs. paraphrasing text). However, tool necessity in the wild is more nuanced due to the divergence of capability boundaries across models: a problem solvable by a strong model on its own may still require tools for a weaker one. In this work, we introduce a model-adaptive definition of tool-necessity, grounded in each model's empirical performance. Following this definition, we compare the necessity against observed tool-call behavior across four models on arithmetic and factual QA dataset, and find substantial mismatches of 26.5-54.0% and 30.8-41.8%, respectively. To diagnose the failure, we decompose tool use into two stages: an internal cognition stage that reflects whether a model believes a tool is necessary, and an execution stage that determines whether the model actually makes a tool-call action. By probing the LLM hidden states, we find that both signals are often linearly decodable, yet their probe directions become nearly orthogonal in the late-layer, last-token regime that drives the next-token action. By tracing the trajectory of samples in the two-stage process, we further discover that the majority of mismatch is concentrated in the cognition-to-action transition, not in cognition itself. These results reveal a knowing-doing gap in LLM tool-use: improving tool-use reliability requires not only better recognition of when tools are needed, but also better translation of that recognition into action.

Tool-integrated reasoning (TIR) enables LLM agents to solve tasks through planning, tool use, and iterative revision, but outcome-only reinforcement learning in this setting suffers from sparse, delayed rewards and weak step-level credit assignment. In long-horizon TIR trajectories, an early irrecoverable mistake can determine success or failure, making it crucial to localize the first irrecoverable step and leverage it for fine-grained credit assignment. We propose Error-Localized Policy Optimization (ELPO), which localizes the first irrecoverable step via binary-search rollout trees under a fixed rollout budget, converts the resulting tree into stable learning signals through hierarchical advantage attribution, and applies error-localized adaptive clipping to strengthen corrective updates on the critical step and its suffix. Across TIR benchmarks in math, science QA, and code execution, ELPO consistently outperforms strong Agentic RL baselines under comparable sampling budgets, with additional gains in Pass@K and Major@K scaling, rollout ranking quality, and tool-call efficiency. Our code will be publicly released soon.

Dataspace connectors decide whether a transfer may occur, not what the transferred value contains, tolerable for contracted applications, not for LLM agents that compose tool calls and spawn sub-agents. Research on agents that generate governance artifacts evaluates output quality; who may authorize an artifact for use falls between that literature and the governance literature, and neither owns it. A published policy is what a dataspace's decision point enforces, so publication is a governance event, and an agent that is both policy subject and policy author writes the norms that bind it. We name this the authorship hazard and state one principle: an agent is a subject of the governance plane, never an author of it. Its authorization channel to publication is closed by construction; its influence channel, drafting what humans approve, is treated as an enforcement problem. On a frozen corpus of agent drafts, publishing without approval reverses 80 authorization decisions, most through drafts that change only a field's sensitivity classification and no policy text; a classifier that reads the policy diff misses every such draft, necessarily. Treating classification as authorship routes them all to review; the registry-held classification this requires is designed and modelled here, not yet implemented in the prototype. At the execution boundary, protected fields reach the model in 105 of 105 cases under prompt-stated duties and in 0 of 105 when the ODRL duty is compiled into an invocation-time tool-call constraint, but where the value is not confined to a named field the compiled condition exposes it in 7 of 7. A centrally provisioned approval pool does not scale to the participant volume that motivates the problem.

AI agents are increasingly deployed in multi-tenant cloud environments, where they execute diverse tool calls within sandboxed containers, each call with distinct resource demands and rapid fluctuations. We present a systematic characterization of OS-level resource dynamics in sandboxed AI coding agents, analyzing 144 software engineering tasks from the SWE-rebench benchmark across two LLM models. Our measurements reveal that (1) OS-level execution (tool calls, container and agent initialization) accounts for 56-74% of end-to-end task latency; (2) memory, not CPU, is the concurrency bottleneck; (3) memory spikes are tool-call-driven with a up to 15.4x peak-to-average ratio; and (4) resource demands are highly unpredictable across tasks, runs, and models. Comparing these characteristics against serverless, microservice, and batch workloads, we identify three mismatches in existing resource controls: a granularity mismatch (container-level policies vs. tool-call-level dynamics), a responsiveness mismatch (user-space reaction vs. sub-second unpredictable bursts), and an adaptability mismatch (history-based prediction vs. non-deterministic stateful execution). We propose AgentCgroup, an intent-driven eBPF-based resource controller that exploits agents ability to declare resource needs and reconstruct execution strategies, using hierarchical cgroup structures aligned with tool-call boundaries, in-kernel enforcement via sched_ext and memcg_bpf_ops, and runtime-adaptive policies. Preliminary evaluation demonstrates improved multi-tenant isolation and reduced resource waste. AgentCgroup is open-source at https://github.com/eunomia-bpf/agentcgroup

When will robots have their ChatGPT moment? Such a breakthrough requires a general-purpose robot that can handle unfamiliar tasks in unfamiliar environments, remain controllable over long interactions, and learn from experience. Today's embodied systems largely follow an end-to-end observation-to-action path. Despite rapid progress, they remain far from this goal: their generalization depends heavily on the coverage of robot training data, while long task execution remains difficult to control and inspect. To realize this goal, we introduce the Embodied Task Agent (ETA), a new paradigm for extending digital agents into the physical world, and release OpenETA as its open-source implementation. ETA centers the robot around a Planner that chooses one Tool call at a time, an Interface that controls execution, and a World that returns the result and a fresh observation. This loop allows the agent to verify outcomes, adapt its plan, and turn successful and failed interactions into reusable experience. OpenETA provides replaceable Planners, composable Tools and Skills, auditable memory, replayable trajectories, and common interfaces for simulation and real robots. For Codex, OpenETA can operate as a lightweight plugin that exposes only observe, mark_point, and move_to.

Spatial reasoning, the ability to determine where objects are, how they relate, and how they move in 3D, remains a fundamental challenge for vision-language models (VLMs). Tool-augmented agents attempt to address this by augmenting VLMs with specialist perception modules, yet their effectiveness is bounded by the action interface through which those tools are invoked. In this work, we study how the design of this interface shapes the agent's capacity for open-ended spatial reasoning. Existing spatial agents either employ single-pass code execution, which commits to a full analysis strategy before any intermediate result is observed, or rely on a structured tool-call interface that often offers less flexibility for freely composing operations or tailoring the analysis to each task. Both designs offer limited flexibility for open-ended, complex 3D/4D spatial reasoning. We therefore propose SpatialClaw, a training-free framework for spatial reasoning that adopts code as the action interface. SpatialClaw maintains a stateful Python kernel pre-loaded with input frames and a suite of perception and geometry primitives, letting a VLM-backed agent write one executable cell per step conditioned on all prior outputs, enabling the agent to flexibly compose and manipulate perception results and adapt its analysis to both intermediate text and visual observations and the demands of each problem. Evaluated across 20 spatial reasoning benchmarks spanning a broad range of static and dynamic 3D/4D spatial reasoning tasks, SpatialClaw achieves 59.9% average accuracy, outperforming the recent spatial agent by +11.2 points, with consistent gains across six VLM backbones from two model families without any benchmark- or model-specific adaptation.

LLM agents increasingly perform autonomous actions through external tools, leading to complex and evolving safety risks. However, existing safety testing targets expert-designed safety violations, and the corresponding outcomes are evaluated by hard-coded rules, making them costly to extend as agents evolve. To this end, we present Vera, an end-to-end automated safety testing framework that instantiates software engineering testing principles for non-deterministic agents through a three-stage, self-reinforcing pipeline. First, a literature-driven exploration continuously discovers and structures emerging risks into taxonomies of safety risks, attack methods, and tool execution environments. Second, combinatorial composition across taxonomy dimensions produces executable safety cases, each specifying a concrete safety goal, a programmatically constructed initial state, and a deterministic verification predicate grounded in observable artifacts. Third, adaptive execution runs heterogeneous agents in isolated sandboxes where a control agent steers multi-turn interaction based on runtime observations, while evidence-grounded verifiers judge outcomes from environment state and tool-call evidence rather than model self-report. We evaluate Vera on four production agent frameworks (OpenClaw, Hermes, Codex, Claude Code), revealing substantial safety weaknesses, with average attack success rates reaching 93.9\% under multi-channel attacks; we also release Vera-Bench, comprising 1600 executable safety cases spanning 124 risk categories across three execution settings. These results indicate that modular, executable testing infrastructure is essential for rigorous and maintainable safety evaluation of rapidly evolving agentic systems at scale. The code is publicly available at https://github.com/Yunhao-Feng/Vera.

How much of a running workflow should a language model agent revise? ControlScope compares continuing generated code, editing the next tool call's data arguments, and replacing the unfinished workflow from the same public execution state. The nested permissions separate available repairs from the actions an agent selects. We evaluate one-time and repeated reviews across filesystem tasks, ALFWorld, and AppWorld. Across two source programs per task and three reasoning-reviewer draws on 20 filesystem tasks, FULL completes 15-16 tasks versus 13 for KEEP; across four fast draws it completes 10-13 versus 13. Fresh student-record confirmation reproduces a batch-read repair. ALFWorld fast panels yield KEEP/ARG/FULL scores of 85/86/87 on 87 tasks across 52 scenes and 134/134/127 on 134 tasks across four scenes; reasoning on the 87-task cohort also yields 85/86/87 with substantial review cost. An AppWorld V1 official-test panel of 585 task instances from 195 scenario templates shows small net differences. Frozen replays expose viable agent-written replacements interrupted by later revision in two failed file-organization runs. An offline source-trajectory midpoint comparison shows later reviews completing an insufficient repair. Five-call protection saves 19.4% of logged model output and loses one success across 20 fresh source runs. An argument-only shortcut shows that the broader sampled policy can overlook a cheaper successful edit available in both operation sets. These outcomes tie repair access to actual choices and subsequent execution.

AI agents execute tens to hundreds of chained LLM calls per task, yet GPU schedulers treat each call as independent, discarding gigabytes of intermediate state between steps and inflating end-to-end latency by 3-8x. We argue that this request-level abstraction is fundamentally mismatched to compound AI workloads, and propose a shift to program-level scheduling: treating the entire agent workflow (not individual inference calls) as the first-class schedulable unit. We present SAGA, a distributed scheduler that implements this abstraction through three mechanisms: (1) Agent Execution Graphs that capture workflow structure to predict KV cache reuse across tool-call boundaries, achieving within 1.31x of Bélády's optimal offline policy; (2) session-affinity batching with work stealing that co-locates correlated requests while maintaining global load balance; and (3) Agent Fair Share, a task-completion-time fairness metric with provable bounded-deviation guarantees. On a 64-GPU cluster serving SWE-bench coding agents and WebArena browser tasks, SAGA reduces task completion time by 1.64x (geometric mean, p < 0.001) over vLLM v0.15.1 with prefix caching and affinity routing, while improving GPU memory utilization by 1.22x and achieving 99.2% SLO attainment under multi-tenant interference. These latency gains come at a quantified cost: approximately 30% lower peak throughput than throughput-optimal batch scheduling, a tradeoff appropriate for the latency-sensitive interactive deployments that dominate compound AI usage. Our results demonstrate that workflow-aware scheduling is essential for efficient compound AI serving.

AI agent frameworks connecting large language model (LLM) reasoning to host execution surfaces--shell, filesystem, containers, and messaging--introduce security challenges structurally distinct from conventional software. We present a systematic taxonomy of 190 advisories filed against OpenClaw, an open-source AI agent runtime, organized by architectural layer and trust-violation type. Vulnerabilities cluster along two orthogonal axes: (1) the system axis, reflecting the architectural layer (exec policy, gateway, channel, sandbox, browser, plugin, agent/prompt); and (2) the attack axis, reflecting adversarial techniques (identity spoofing, policy bypass, cross-layer composition, prompt injection, supply-chain escalation). Patch-differential evidence yields three principal findings. First, three Moderate- or High-severity advisories in the Gateway and Node-Host subsystems compose into a complete unauthenticated remote code execution (RCE) path--spanning delivery, exploitation, and command-and-control--from an LLM tool call to the host process. Second, the exec allowlist, the primary command-filtering mechanism, relies on a closed-world assumption that command identity is recoverable via lexical parsing. This is invalidated by shell line continuation, busybox multiplexing, and GNU option abbreviation. Third, a malicious skill distributed via the plugin channel executed a two-stage dropper within the LLM context, bypassing the exec pipeline and demonstrating that the skill distribution surface lacks runtime policy enforcement. The dominant structural weakness is per-layer trust enforcement rather than unified policy boundaries, making cross-layer attacks resilient to local remediation.

Tool-using AI agents are increasingly deployed across enterprise software systems, yet widely used benchmarks primarily evaluate nominal task completion, conflating baseline planning competence with operational fault recovery. We introduce UndoBench, a benchmark spanning 36 base workflows and 36 fault scenarios across 8 enterprise domains, decoupling task competence from recovery capability via counterfactual paired trials under identical seeds alongside wire-level effect-history and environment-state oracles. On 12 held-out TEST workflows across two open-weight models, two frameworks, and three recovery paradigms (5,760 executions / 2,880 paired trials) in the frozen lost-acknowledgment study, nominal competence reached 83.54% while conditional recovery success rate (CRSR) fell to 46.72%, with naive retry producing duplicate external effects in 53.33% of trials. Extensions to commercial API models reproduced this competence-recovery separation. Evaluations across complementary execution boundaries show that recovery is phase-dependent: before mutation, methods perform similarly without duplicate effects among capable trials; during partial mutation, naive retry, per-call idempotency, and zero-privilege journaling collapse on the evaluated composite workflows; after commit but before acknowledgment, verification and server-side idempotency substantially improve safety. These findings demonstrate that evaluating nominal completion alone masks critical, phase-dependent recovery vulnerabilities in autonomous agents.

Large language models increasingly rely on external tools to access up-to-date information, perform computation, and interact with the outside world. For autoregressive models, tool use naturally fits the generation process: the model emits a tool call, waits for the result, and then continues generating. Diffusion language models (dLLMs), however, reason by repeatedly refining many parts of their output in parallel, making this stop-and-resume interaction pattern unnecessarily restrictive. It can force tool decisions before the model's reasoning has stabilized, delay useful observations until a discrete call finishes, and introduce redundant refinement and tool execution, potentially hurting both task accuracy and inference efficiency. We introduce Continuous Interaction Diffusion (CID), a diffusion-native model--runtime architecture that integrates tool interaction into iterative denoising. CID separates a model-read-only fact channel, a thought channel represented by a Typed Cognitive Tensor, and a display channel. Information needs can emerge before a textual or JSON call is fully serialized, allowing perceptual bindings to launch external reads while denoising continues. Returned results are projected into the evolving thought state and can revise earlier cognition and display regions. Persistent bindings reuse static results without repeated external execution and refresh changing sources when needed. CID is designed to expose evidence earlier, overlap tool latency with model computation, reduce duplicate external work, and preserve useful computation after new evidence arrives. We formalize the architecture, runtime, and training objectives, and define an evaluation protocol for task quality and end-to-end efficiency. This first paper focuses on read-only tools and makes no empirical performance claims.

LLM agents increasingly rely on external tools, expanding capability while creating a new security boundary: third-party tools may appear benign at the interface level while embedding unsafe behavior in implementation. Existing defenses rely on weak metadata, collapse characterization and policy judgment into a single decision, or use heuristic/LLM enforcement that lacks deterministic, auditable reasoning over task context and multi-tool composition. This paper presents ToolGuardian, a policy-driven framework for securing agent-tool interactions through pre-admission vetting and task-aware runtime authorization. ToolGuardian uses progressive characterization to convert evidence into structured facts: descriptions capture declared intent, system-call traces expose coarse behavior, mock execution reveals observed effects, and source analysis identifies latent behavior. ToolGuardian's core contribution is an Answer Set Programming (ASP)-based declarative policy layer that reasons explicitly over capabilities, effects, task context, and composition. We compare ASP against heuristic and LLM-based policy realizations using identical inputs and output contracts. We evaluate ToolGuardian on 16 MCP-style tools, including 8 malicious variants derived from real open-source tools, and 20 runtime scenarios. For vetting, ASP reaches a deny-class F1 of 0.86 and 88% accuracy using description, syscall, and observed-effect evidence. For runtime authorization, fully specified realizations classify all scenarios correctly, while ablations show that removing compositional and conformance rules substantially degrades performance.

Tool-augmented LLM agents tend to call tools indiscriminately, even when the model can answer directly. Each unnecessary call wastes API fees and latency, yet no existing benchmark systematically studies when a tool call is actually needed. We propose When2Tool, a benchmark of 18 environments (15 single-hop, 3 multi-hop) spanning three categories of tool necessity -- computational scale, knowledge boundaries, and execution reliability -- each with controlled difficulty levels that create a clear decision boundary between tool-necessary and tool-unnecessary tasks. We evaluate two families of training-free baselines: Prompt-only (varying the prompt to discourage unnecessary calls) and Reason-then-Act (requiring the model to reason about tool necessity before acting). Both provide limited control: Prompt-only suppresses necessary calls alongside unnecessary ones, and Reason-then-Act still incurs a disproportionate accuracy cost on hard tasks. To understand why these baselines fail, we probe the models' hidden states and find that tool necessity is linearly decodable from the pre-generation representation with AUROC 0.89--0.96 across six models, substantially exceeding the model's own verbalized reasoning. This reveals that models already know when tools are needed, but fail to act on this knowledge during generation. Building on this finding, we propose Probe&Prefill, which uses a lightweight linear probe to read the hidden-state signal and prefills the model's response with a steering sentence. Across all models tested, Probe&Prefill reduces tool calls by 48% with only 1.7% accuracy loss, while the best baseline at comparable accuracy only reduces 6% of tool calls, or achieves a similar tool call reduction but incurs a 5times higher accuracy loss. Our code is available at https://github.com/Trustworthy-ML-Lab/when2tool

Tool-using LLM agents can violate the very policies they are deployed to enforce while appearing to complete the task successfully. In policy-permissive environments, a tool may execute any well-formed call even when the corresponding state transition is forbidden by domain policy. The result is a silent wrong state (a booking cancelled, a passenger count changed, a claim acted on without verification) that neither the tool nor the agent's self-report exposes. We study this failure mode in the τ^2-bench airline domain. On a budget agent, 78% of observed failures are silent wrong-state failures with no tool error, and the aggregate failure rate is reproducible across disjoint seeds, not sampling noise. We then evaluate a lightweight intervention: deterministic, read-only pre-execution gates that inspect the proposed call and current state before allowing a write. A four-gate suite raises full-benchmark success from 29.6% to 42.0% on gpt-4o-mini (+12.4pp; paired task-level bootstrap P=0.0012), and the lift reproduces on a disjoint 15-seed set (+12.3pp; P=0.0008). The effect is concentrated where the gates fire: on the 26/50 firing tasks, success rises by +19.2pp, while movement on the 24 non-firing tasks does not exclude zero. Two negative controls (a self-enforcing retail domain and BFCL) bound the mechanism: gates help when tools are policy-permissive and add little where tools already self-enforce. As suggestive evidence, not a central claim, the same failure mode persists at the frontier: gpt-5.2 at default reasoning still attempts policy-violating writes, and the same suite improves success from 61.2% to 71.6% (+10.4pp; P=0.020; n=5, no replication). The contribution is a bounded evaluation and reliability result: deterministic gates do not guarantee task success, but they can deterministically prevent a known class of silent policy-violating writes at the action boundary.

Tool-calling has changed Large Language Model (LLM) applications by integrating external tools, significantly enhancing their functionality across diverse tasks. However, this integration also introduces new security vulnerabilities, particularly in the tool scheduling mechanisms of LLM, which have not been extensively studied. To fill this gap, we present ToolCommander, a novel framework designed to exploit vulnerabilities in LLM tool-calling systems through adversarial tool injection. Our framework employs a well-designed two-stage attack strategy. Firstly, it injects malicious tools to collect user queries, then dynamically updates the injected tools based on the stolen information to enhance subsequent attacks. These stages enable ToolCommander to execute privacy theft, launch denial-of-service attacks, and even manipulate business competition by triggering unscheduled tool-calling. Notably, the ASR reaches 91.67% for privacy theft and hits 100% for denial-of-service and unscheduled tool calling in certain cases. Our work demonstrates that these vulnerabilities can lead to severe consequences beyond simple misuse of tool-calling systems, underscoring the urgent need for robust defensive strategies to secure LLM Tool-calling systems.

Tool-calling agents are increasingly deployed in real-world customer-facing workflows. Yet most studies on tool-calling agents focus on idealized settings with general, fixed, and well-specified tasks. In real-world applications, user requests are often (1) ambiguous, (2) changing over time, or (3) infeasible due to policy constraints, and training and evaluation data that cover these diverse, complex interaction patterns remain under-represented. To bridge the gap, we present Trajectory2Task, a verifiable data generation pipeline for studying tool use at scale under three realistic user scenarios: ambiguous intent, changing intent, and infeasible intents. The pipeline first conducts multi-turn exploration to produce valid tool-call trajectories. It then converts these trajectories into user-facing tasks with controlled intent adaptations. This process yields verifiable task that support closed-loop evaluation and training. We benchmark seven state-of-the-art LLMs on the generated complex user scenario tasks and observe frequent failures. Finally, using successful trajectories obtained from task rollouts, we fine-tune lightweight LLMs and find consistent improvements across all three conditions, along with better generalization to unseen tool-use domains, indicating stronger general tool-calling ability.

Tool-augmented LLM agents commonly rely on step-wise atomic tool calls, where each invocation, observation, and value transfer is exposed in the main reasoning trace. This creates an execution-granularity mismatch: locally deterministic tool workflows are unfolded into repeated model-visible decisions, consuming context and forcing the model to manage low-level dataflow in the trace. We introduce HyperTool, a unified executable MCP-style tool interface that changes the model-visible unit of tool execution. A model invokes HyperTool with a code block that can call existing tools through their original schemas, manipulate returned values, and pass intermediate results locally, folding deterministic tool subroutines into a single outer call. To train models to use this interface, we synthesize HyperTool-format trajectories from cross-tool compositional tasks and verify them in real MCP environments. On MCP-Universe, HyperTool improves average accuracy from 15.69\% to 35.29\% on Qwen3-32B and from 9.93\% to 33.33\% on Qwen3-8B, and surpass GPT-OSS and Kimi-k2.5 on average accuracy, showing that our HyperTool can substantially improve multi-step tool use.

Tool-use capability is a fundamental component of LLM agents, enabling them to interact with external systems through structured function calls. However, existing research exhibits inconsistent interaction representations, largely overlooks the structural distribution of tool-use trajectories, and relies on incompatible evaluation benchmarks. We present UniToolCall, a unified framework for tool learning that standardizes the entire pipeline from toolset construction and dataset generation to evaluation. The framework curates a large tool pool of 22k+ tools and constructs a hybrid training corpus of 390k+ instances by combining 10 standardized public datasets with structurally controlled synthetic trajectories. It explicitly models diverse interaction patterns, including single-hop vs. multi-hop and single-turn vs. multi-turn, while capturing both serial and parallel execution structures. To support coherent multi-turn reasoning, we further introduce an Anchor Linkage mechanism that enforces cross-turn dependencies. Furthermore, we convert 7 public benchmarks into a unified Query--Action--Observation--Answer (QAOA) representation with fine-grained evaluation at the function-call, turn, and conversation levels. Experiments show that fine-tuning Qwen3-8B on our dataset substantially improves tool-use performance. Under the distractor-heavy Hybrid-20 setting, achieves 93.0% single-turn Strict Precision, outperforming commercial models including GPT, Gemini, and Claude.

A coding agent must emit a valid tool call--a parseable invocation of a tool in the provided schema--before the harness can execute its chosen action. We study how local serving stacks affect this protocol step and show that measured outcomes can depend on the serving layer rather than model behavior alone. In Ollama, the default tools= request is gated per model by a static template flag: some models are accepted and return calls as text, some return native tool_calls, while Phi-3 and Gemma-3 are rejected before inference. In our harness, rejection and retry exhaustion are not preserved as structured failure metadata, so downstream analysis can misclassify them as model non-calls and naively report 0% fidelity. Adding a text tool list while retaining the native channel recovers much of the measured fidelity for accepted models, whereas a uniform text protocol reduces fidelity for Llama-3.2, which has native tool-call support. Cross-stack probes on Ollama, llama.cpp, vLLM, and SGLang show different handling of the same request. Constrained decoding removes parse failures but can induce non-termination, and turn-pooled versus per-instance estimates differ by up to about 55 points. We conclude with a checklist for treating serving behavior as part of the evaluation protocol.

Tool calling has greatly expanded the practical utility of large language models (LLMs) by enabling them to interact with external applications. As LLM capabilities advance, effective tool use increasingly involves multi-step, multi-turn interactions to solve complex tasks. However, the resulting growth in tool interactions incurs substantial latency, posing a key challenge for real-time LLM serving. Through empirical analysis, we find that tool-calling traces are highly structured, conform to constrained schemas, and often exhibit recurring invocation patterns. Motivated by this, we propose ToolSpec, a schema-aware, retrieval-augmented speculative decoding method for accelerating tool calling. ToolSpec exploits predefined tool schemas to generate accurate drafts, using a finite-state machine to alternate between deterministic schema token filling and speculative generation for variable fields. In addition, ToolSpec retrieves similar historical tool invocations and reuses them as drafts to further improve efficiency. ToolSpec presents a plug-and-play solution that can be seamlessly integrated into existing LLM workflows. Experiments across multiple benchmarks demonstrate that ToolSpec achieves up to a 4.2x speedup, substantially outperforming existing training-free speculative decoding methods.

Tool calling has emerged as a critical capability for AI agents to interact with the real world and solve complex tasks. While the Model Context Protocol (MCP) provides a powerful standardized framework for tool integration, there is a significant gap in benchmarking how well AI agents can effectively solve multi-step tasks using diverse MCP tools in realistic, dynamic scenarios. In this work, we present LiveMCP-101, a benchmark of 101 carefully curated real-world queries, refined through iterative LLM rewriting and manual review, that require coordinated use of multiple MCP tools including web search, file operations, mathematical reasoning, and data analysis. Moreover, we introduce a novel evaluation approach that leverages ground-truth execution plans rather than raw API outputs, better reflecting the evolving nature of real-world environments. Experiments show that even frontier LLMs achieve a success rate below 60\%, highlighting major challenges in tool orchestration. Detailed ablations and error analysis further reveal distinct failure modes and inefficiencies in token usage, pointing to concrete directions for advancing current models. LiveMCP-101 sets a rigorous standard for evaluating real-world agent capabilities, advancing toward autonomous AI systems that reliably execute complex tasks through tool use.

Tool Calling and Structured Output are two core capabilities of modern Agent systems, yet their interaction under joint deployment conditions remains insufficiently understood. This paper reports a reproducible phenomenon observed in a production Agent system: when Tool Calling and JSON Schema constraints are simultaneously enabled, multiple open-weight models cease invoking tools despite maintaining high schema compliance. We refer to this behavior as Tool Suppression. Through controlled experiments across multiple model families and deployment settings, we consistently reproduce Tool Suppression under joint constraints, while tool execution and schema compliance remain functional when evaluated independently. Further analysis reveals that JSON Schema constraints are compiled into grammar-based token masks, causing tool-call tokens to become unreachable during decoding. This provides an implementation-level explanation for the observed behavior. To interpret the phenomenon, we formulate the Constraint Priority Inversion (CPI) hypothesis, which suggests that schema satisfaction may dominate action-selection behavior under multiple simultaneous constraints. We present CPI as a behavioral hypothesis consistent with the observed evidence rather than a verified internal mechanism. To mitigate the problem, we propose Transparent Two-Pass Execution, an inference-time strategy that decouples tool execution from schema-constrained response generation. Experimental results show that this approach restores tool invocation while preserving structured output guarantees without requiring model retraining. These findings suggest that evaluating tool use and structured output separately may overlook important reliability issues in production Agent systems. Code, data, and docs will be released at https://github.com/Fzsama/Constrain-Tax-26-06.git.

Tool-calling is a central component of modern large language model (LLM) agents, equipping them with skills beyond their parametric knowledge. This paper studies tool-calling along two complementary axes: effectiveness, i.e., how this capability is measured, and efficiency, i.e., how it is learned. On effectiveness, we systematically analyze tool-calling evaluation pipelines and show that results can be highly sensitive to seemingly minor, often undocumented implementation choices including the random seed, system prompt, multi-turn template construction, and how prior interaction/reasoning history is carried forward. These choices can lead to substantial differences in reported performance, especially in multi-turn settings where without rigorous standardization, leaderboard rankings are unreliable. On efficiency, we examine standard reinforcement learning (RL) for tool-calling and identify two sources of computational waste: (i) during rollouts, many prompts produce no learning signal, and (ii) during policy updates, optimization incurs high computational cost. Guided by these findings, we introduce two techniques that accelerate RL-based tool-calling training, achieving substantial wall-clock speedup without degrading performance.

Large language model (LLM)-based agents have shown strong capabilities in using external tools to solve complex tasks. However, existing evaluations often overlook the temporal dimension of tool use, especially the impact of tool response latency, and are usually limited to single-task settings. In real-world applications, multiple tasks often need to be executed concurrently, and overall efficiency depends on whether an agent can use idle time while waiting for tool responses. We refer to this capability as asynchronous tool calling. To evaluate it, we propose AsyncTool, a benchmark for assessing LLM-based agents in interactive multi-task tool-use environments with delayed tool feedback. AsyncTool presents multiple heterogeneous tasks simultaneously and simulates realistic tool response latency during execution. Using a hybrid data evolution strategy, we construct a diverse asynchronous multitasking dataset that covers multiple scenarios and tool-use patterns. We evaluate models at the step, sub-task, and task levels, and introduce efficiency-oriented metrics to measure task coordination and completion efficiency. Extensive experiments show that delayed tool feedback poses substantial challenges to current agents and leads to clear performance degradation. Models that better coordinate task switching, dependency tracking, and state maintenance achieve stronger performance on AsyncTool. Our analysis identifies key failure modes of current tool-using agents and provides practical insights for designing future systems with stronger temporal reasoning and coordination capabilities.

Large language models are increasingly deployed as agents that solve tasks by interacting with external tool environments. Although recent tool-use benchmarks increasingly cover complex task settings, they still largely assume clean, stable, and trustworthy tool environments, leaving tool-environment unreliability insufficiently examined. We introduce ToolBench-X, a benchmark for evaluating agents under recoverable reliability hazards. ToolBench-X contains executable multi-step tasks across diverse domains and sequential, parallel, and mixed workflows, each paired with deterministic tools and a canonical final answer for automatic evaluation. Starting from clean tool environments, ToolBench-X injects five structured hazard types: Specification Drift, Invocation Error, Execution Failure, Output Drift, and Cross-source Conflict. Crucially, each injected instance remains solvable through at least one valid recovery path, such as retrying, fallback, verification, or cross-checking. Experiments reveal a substantial reliability gap: agents that perform well with reliable tools often fail under recoverable hazards. Further analysis shows that failures are driven less by tool-use volume or inference budget than by limited hazard diagnosis and ineffective recovery. Targeted recovery hints recover many failed tasks, while test-time scaling yields more limited gains. These results suggest that tool-use evaluation should move beyond function-call accuracy toward task completion under unreliable tool environments. The code and data is available at https://github.com/Foreverskyou/ToolBench-X.

Currently, the vast majority of locally deployed open-source large language models (LLMs) and some commercial model interfaces do not support stable tool calling functionality. The existing solution involves fine-tuning LLMs, which results in significant time and computational resource consumption. This paper proposes a method that enables LLMs to achieve stable tool calling capabilities using only prompt engineering and some ingenious code design. We conducted experiments on multiple LLMs that lack tool calling capabilities across various tool calling tasks, achieving a success rate of 100%.

Language-model agents read attacker-writable context to solve tasks. Tool execution needs a separate authority check for protected sink fields, sink-interpreted payloads, and the invocation event. Context-to-Execution Integrity (CXI) is an execution-boundary system for this setting. Policies mark protected sink fields, typed releases carry narrow validated values from writable context to specific destinations, opaque data slots keep evidence as data, and a deterministic gate admits a call only after field authority, exact-effect authorization, and invocation authority all bind to the same action manifest. We evaluate CXI on open-weight field-projection runs, AgentDojo live episodes, a code-agent exact-effect benchmark, manifest-bound ledger faults, proposal-pressure controls, and hosted/API compatibility traces. AgentDojo covers 720 live episodes and 1,739 LLM calls; the code-agent benchmark covers 400 repository episodes with exact-effect authorization and lease-bound execution, yielding 231 safe task completions and zero observed field, effect, or invocation escapes. The accounting reports parser outcomes, authorization outcomes, and task-quality outcomes together with the admission-integrity result. Across the evaluated sinks, CXI admits execution only when field, effect, and invocation authority bind to the same action manifest.

Tool-augmented vision-language agents can acquire external perceptual evidence through OCR, detection, segmentation, and other tools, but executing every proposed tool call is costly and sometimes unnecessary. We study the pre-call control problem: after a ReAct-style VLM agent proposes a perceptual tool call, should the call be executed, or skipped before its output enters the context? Across five benchmarks, we find that the baseline agent exhibits poor local selectivity: helpful and harmful calls occur at similar rates (11.8% vs. 9.9%), while most calls do not change the immediate forced-answer prediction. We introduce ToolGate, a lightweight external controller that predicts execute/skip decisions from trajectory text and simple structural features. Across two Qwen3-VL backbones, ToolGate reduces token cost to 64-69% of the unrestricted ReAct baseline while preserving average accuracy in cross-domain settings. With matched-domain trajectory training on Qwen3-VL-30B, it further improves average accuracy by 1.65 points. These results show that tool-augmented VLM agents benefit not only from better perceptual tools, but also from explicit control over when tool outputs are worth paying for.

The complexity of large language model (LLM) serving workloads has substantially increased due to the integration with external tool invocations, such as ChatGPT plugins. In this paper, we identify a new opportunity for efficient LLM serving for requests that trigger tools: tool partial execution alongside LLM decoding. To this end, we design Conveyor, an efficient LLM serving system optimized for handling requests involving external tools. We introduce a novel interface for tool developers to expose partial execution opportunities to the LLM serving system and a request scheduler that facilitates partial tool execution. Our results demonstrate that tool partial execution can improve request completion latency by up to 38.8%.

To standardize interactions between LLM-based agents and their environments, the Model Context Protocol (MCP) was proposed and has since been widely adopted. However, integrating external tools expands the attack surface, exposing agents to tool poisoning attacks. In such attacks, malicious instructions embedded in tool metadata are injected into the agent context during MCP registration phase, thereby manipulating agent behavior. Prior work primarily focuses on explicit tool poisoning or relied on manually crafted poisoned tools. In contrast, we focus on a particularly stealthy variant: implicit tool poisoning, where the poisoned tool itself remains uninvoked. Instead, the instructions embedded in the tool metadata induce the agent to invoke a legitimate but high-privilege tool to perform malicious operations. We propose MCP-ITP, the first automated and adaptive framework for implicit tool poisoning within the MCP ecosystem. MCP-ITP formulates poisoned tool generation as a black-box optimization problem and employs an iterative optimization strategy that leverages feedback from both an evaluation LLM and a detection LLM to maximize Attack Success Rate (ASR) while evading current detection mechanisms. Experimental results on the MCPTox dataset across 12 LLM agents demonstrate that MCP-ITP consistently outperforms the manually crafted baseline, achieving up to 84.2% ASR while suppressing the Malicious Tool Detection Rate (MDR) to as low as 0.3%.

Tool calling is a critical capability that allows Large Language Models (LLMs) to interact with external systems, significantly expanding their utility. However, research and resources for tool calling are predominantly English-centric, leaving a gap in our understanding of how to enable this functionality for other languages, such as Arabic. This paper investigates three key research questions: (1) the necessity of in-language (Arabic) tool-calling data versus relying on cross-lingual transfer, (2) the effect of general-purpose instruction tuning on tool-calling performance, and (3) the value of fine-tuning on specific, high-priority tools. To address these questions, we conduct extensive experiments using base and post-trained variants of an open-weight Arabic LLM. To enable this study, we bridge the resource gap by translating and adapting two open-source tool-calling datasets into Arabic. Our findings provide crucial insights into the optimal strategies for developing robust tool-augmented agents for Arabic.

The performance of LLM-based agents depends not only on the agent itself but also on the quality of the tool interfaces it consumes. While prior work has focused heavily on agent fine-tuning, tool interfaces-including natural language descriptions and parameter schemas-remain largely human-oriented and often become a bottleneck, especially when agents must select from large candidate tool sets. Existing approaches to improving tool interfaces rely on execution traces, which are frequently unavailable in cold-start or privacy-constrained settings, and typically optimize each tool independently, limiting scalability and generalization to unseen tools. We propose Trace-Free+, a curriculum learning framework that progressively transfers supervision from trace-rich settings to trace-free deployment, encouraging the model to abstract reusable interface-usage patterns and tool usage outcomes. To support this approach, we construct a large-scale dataset of high-quality tool interfaces using a structured workflow over a diverse collection of tools. Experiments on StableToolBench and RestBench show consistent gains on unseen tools, strong cross-domain generalization, and robustness as the number of candidate tools scales to over 100, demonstrating that tool interface optimization is a practical and deployable complement to agent fine-tuning.

Agent usage is shifting toward long-horizon tasks such as coding and scientific discovery, among which terminal tasks are especially important. We introduce T1, a Mixture-of-Experts model of 122B total trained with reinforcement learning, operating a real shell in a cloud sandbox for up to 300+ tool-call turns per task, rewarded by executing each task's own verifier. We provide a comprehensive recipe: First, an aggressively warm-started to stabilize actor-critic training, with a dense process reward scoring trajectories by the absolute number of passing verifiers. Second, stable optimization through TITO construction, training on the exact sampled token identifiers with drift repair at turn boundaries, and rollout routing replay, recording the sampler's per-token expert choices at every MoE layer and replaying them during training. Third, fully out-of-distribution training corpus: isolated seeds and synthesized tasks disjoint from Terminal-Bench 2.1 ensures gains reflect genuine capability transfer over benchmark overfitting. Together, TITO and R3 cut the training-to-inference log-probability difference from 0.021 to 0.013, with exactly aligned zero token drift in the loss region. On Terminal-Bench 2.1, our post-train pipeline raises initial base model from 43.8% to T1 with 64.0% resolved. On Long-Horizon Terminal Bench, T1 reaches 27.9% and surpasses GPT-5.4 and GLM-5.1.

Large language model (LLM) agents must generalize from tools seen during training to unseen tools at deployment. A key challenge is tool trialing, i.e., excessive trials waste the interaction budget, whereas selective trials enable exploration of unfamiliar tools. Existing outcome-based post-training leaves wasteful trials unguided, while turn-level supervision may suppress necessary exploration. We introduce ToolCompass, a post-training framework that guides tool trialing by organizing tool-call representations according to shared functions. Specifically, ToolCompass models each function class as a von Mises--Fisher distribution and jointly reduces intra-function variation across domains and increases inter-function separation. This structure transfers experience from seen tools to functionally similar unseen tools, directing exploration away from unrelated alternatives. ToolCompass requires no ground-truth call traces or unseen-tool access and incurs no inference overhead. Experiments on AppWorld and FTRL show consistent gains across GRPO, RFT, and DMPO. improves AppWorld OOD task success by up to 10.71 percentage points over vanilla post-training and performs best among competitive baselines on both benchmarks.

AI agents increasingly rely on external tools to solve complex, long-horizon tasks. Advancing such agents requires reproducible evaluation and large-scale training in controllable, diverse, and realistic tool-use environments. However, real-world APIs are limited in availability, domain coverage, and stability, often requiring access keys and imposing rate limits, which render them impractical for stable evaluation or scalable training. To address these challenges, we introduce SynthTools, a flexible and scalable framework for generating synthetic tool ecosystems. Our framework consists of three core components: Tool Generation for automatic and scalable creation of diverse tools, Tool Simulation to emulate realistic tool behaviors, and Tool Audit to ensure correctness and consistency of tool simulation. To illustrate its scalability, we show that SynthTools can readily produce toolsets that span twice as many domains and twice as many tools per domain as prior work. Furthermore, the tool simulation and tool audit components demonstrate strong reliability, achieving 94% and 99% accuracy respectively. Finally, we construct downstream tasks from the generated tools that even state-of-the-art models struggle to complete. By enabling scalable, diverse, and reliable tool ecosystems, SynthTools provides a practical path toward large-scale training and stable evaluation of tool-use agents. Our code is available at https://github.com/namkoong-lab/SynthTools.

Tool-calling benchmarks are increasingly used to rank language-model agents, yet their scores are often treated as ground truth without validating the evaluators themselves. We present a systematic validity and reproducibility audit of four major tool-calling benchmark families: BFCL v4, τ2-Bench, LiveMCPBench, and MCP-Atlas. Across 496 expert-reviewed benchmark tasks, we find 92 evaluator-human disagreements, corresponding to an 18.5% misalignment rate. The failures are not isolated annotation mistakes: deterministic benchmarks exhibit brittle state matching, trajectory lock-in, incorrect ground truths, substring-based communication failures, and reward-basis misalignment, while LLM-judge benchmarks exhibit rubric drift, hallucinated completion, answer-only scoring, and substantial run-to-run variance. In LiveMCPBench, 23 repeated evaluations of the same setup produce scores ranging from 57.9% to 76.8%, a spread of 18.9 percentage points, large enough to change leaderboard conclusions. These results show that current tool-calling scores can reflect evaluator artifacts rather than agent capability. We introduce a unified taxonomy of tool-calling evaluation failures, release trace-level audit artifacts and corrected evaluation components, and argue for decomposed metrics that separately measure tool invocation, task completion, and outcome verification. Our findings suggest that progress in tool-using agents requires benchmarks whose evaluators are themselves reproducible, auditable, and aligned with human judgments of task success. We further introduce Tool-Veritas, a configurable benchmark that combines deterministic state verification with optional qualitative judging, and Harness Lab, an open-source system for benchmark execution, trace inspection, repeated-run comparison, and evaluator debugging.

Recently, tool-augmented LLMs have gained increasing attention. Given an instruction, tool-augmented LLMs can interact with various external tools in multiple rounds and provide a final answer. However, previous LLMs were trained on overly detailed instructions, which included API names or parameters, while real users would not explicitly mention these API details. This leads to a gap between trained LLMs and real-world scenarios. In addition, most works ignore whether the interaction process follows the instruction. To address these issues, we constructed a training dataset called MGToolBench, which contains statement and category-level instructions to better reflect real-world scenarios. In addition, we propose ToolPlanner, a two-stage reinforcement learning framework that utilizes path planning and two feedback mechanisms to enhance the LLM's task completion and instruction-following capabilities. Experimental results show that ToolPlanner significantly improves the Match Rate, Pass Rate and Win Rate by 26.8%, 20.2%, and 5.6% compared to the SOTA model. Human evaluation verifies that the multi-granularity instructions can better align with users' usage habits. Our data and code will be released upon acceptance.

Large language models (LLMs) augmented with external tools have demonstrated remarkable capability in solving complex real-world tasks. However, existing approaches suffer from two key challenges: brittle multi-step and multi-turn reasoning caused by incompatible tool output types and API schemas, and performance degradation under large tool catalogues. To address these, we introduce Tool Primitives, a design that replaces rigid API schema-based invocation with natural language as the interface for tool calling, where each tool is wrapped with an LLM interface that handles schema resolution and execution internally, enabling natural inter-tool communication for nested and multi-turn tool calling. Building on Tool Primitives, we host ToolFace, a centralized repository of 25,519 functions from which LLMs dynamically retrieve only the relevant tools at inference time, eliminating the need to enumerate raw API schemas in context. To orchestrate Tool Primitives and ToolFace reliably in complex settings, we further propose HEART, a Harness Engineering framework via Agent-native, Reusable Tool Primitives, comprising a Planner, Router, and Verifier that jointly support dynamic tool invocation planning, multi-step execution, and feedback-driven recovery. Experiments on five benchmarks demonstrate that HEART outperforms SFT-based models by 10% on average and surpasses GPT-5.4, Claude-4.6-Sonnet, and Gemini-3.1-Pro by 6% on average while reducing API cost by up to 85%. On 50 real-world tasks, HEART achieves 84% task completion, 3.8times the average of three frontier commercial models (22%).

Tool-augmented LLM agents raise new security risks: tool executions can introduce runtime-only behaviors, including prompt injection and unintended exposure of external inputs (e.g., environment secrets or local files). While existing scanners often focus on static artifacts, analyzing runtime behavior is challenging because directly executing untrusted tools can itself be dangerous. We present MCP-SandboxScan, a lightweight framework motivated by the Model Context Protocol (MCP) that safely executes untrusted tools inside a WebAssembly/WASI sandbox and produces auditable reports of external-to-sink exposures. Our prototype (i) extracts LLM-relevant sinks from runtime outputs (prompt/messages and structured tool-return fields), (ii) instantiates external-input candidates from environment values, mounted file contents, and output-surfaced HTTP fetch intents, and (iii) links sources to sinks via snippet-based substring matching. Case studies on three representative tools show that MCP-SandboxScan can surface provenance evidence when external inputs appear in prompt/messages or tool-return payloads, and can expose filesystem capability violations as runtime evidence. We further compare against a lightweight static string-signature baseline and use a micro-benchmark to characterize false negatives under transformations and false positives from short-token collisions.

By providing a standardized interface for LLM agents to interact with external tools, the Model Context Protocol (MCP) is quickly becoming a cornerstone of the modern autonomous agent ecosystem. However, it creates novel attack surfaces due to untrusted external tools. While prior work has focused on attacks injected through external tool outputs, we investigate a more fundamental vulnerability: Tool Poisoning, where malicious instructions are embedded within a tool's metadata without execution. To date, this threat has been primarily demonstrated through isolated cases, lacking a systematic, large-scale evaluation. We introduce MCPTox, the first benchmark to systematically evaluate agent robustness against Tool Poisoning in realistic MCP settings. MCPTox is constructed upon 45 live, real-world MCP servers and 353 authentic tools. To achieve this, we design three distinct attack templates to generate a comprehensive suite of 1312 malicious test cases by few-shot learning, covering 10 categories of potential risks. Our evaluation on 20 prominent LLM agents setting reveals a widespread vulnerability to Tool Poisoning, with o1-mini, achieving an attack success rate of 72.8\%. We find that more capable models are often more susceptible, as the attack exploits their superior instruction-following abilities. Finally, the failure case analysis reveals that agents rarely refuse these attacks, with the highest refused rate (Claude-3.7-Sonnet) less than 3\%, demonstrating that existing safety alignment is ineffective against malicious actions that use legitimate tools for unauthorized operation. Our findings create a crucial empirical baseline for understanding and mitigating this widespread threat, and we release MCPTox for the development of verifiably safer AI agents. Our dataset is available at an anonymized repository: https://anonymous.4open.science/r/AAAI26-7C02.

Reusing and invoking existing code remains costly and unreliable, as most practical tools are embedded in heterogeneous code repositories and lack standardized, executable interfaces. Although large language models (LLMs) and Model Context Protocol (MCP)-based tool invocation frameworks enable natural language task execution, current approaches rely heavily on manual tool curation and standardization, which fundamentally limits scalability. In this paper, we propose ToolRosetta, a unified framework that automatically translates open-source code repositories and APIs into MCP-compatible tools that can be reliably invoked by LLMs. Given a user task, ToolRosetta autonomously plans toolchains, identifies relevant codebases, and converts them into executable MCP services, enabling end-to-end task completion with minimal human intervention. In addition, ToolRosetta incorporates a security inspection layer to mitigate risks inherent in executing arbitrary code. Extensive experiments across diverse scientific domains demonstrate that ToolRosetta can automatically standardize a large number of open-source tools and reduce the human effort required for code reproduction and deployment. Notably, by seamlessly leveraging specialized open-source tools, ToolRosetta-powered agents consistently improve task completion performance compared to commercial LLMs and existing agent systems.

While enabling large language models to implement function calling (known as APIs) can greatly enhance the performance of LLMs, function calling is still a challenging task due to the complicated relations between different APIs, especially in a context-learning setting without fine-tuning. This paper proposes a simple yet controllable target-driven approach called Reverse Chain to empower LLMs with capabilities to use external APIs with only prompts. Given that most open-source LLMs have limited tool-use or tool-plan capabilities, LLMs in Reverse Chain are only employed to implement simple tasks, e.g., API selection and argument completion, and a generic rule is employed to implement a controllable multiple functions calling. In this generic rule, after selecting a final API to handle a given task via LLMs, we first ask LLMs to fill the required arguments from user query and context. Some missing arguments could be further completed by letting LLMs select another API based on API description before asking user. This process continues until a given task is completed. Extensive numerical experiments indicate an impressive capability of Reverse Chain on implementing multiple function calling. Interestingly enough, the experiments also reveal that tool-use capabilities of the existing LLMs, e.g., ChatGPT, can be greatly improved via Reverse Chain.

Computer-use agents (CUAs) automate tasks specified with natural language such as "order the cheapest item from Taco Bell" by generating sequences of calls to tools such as click, type, and scroll on a browser. Current implementations follow a sequential fetch-screenshot-execute loop where each iteration requires an LLM call, resulting in high latency and frequent errors from incorrect tool use. We present agent just-in-time (JIT) compilation, a system that compiles task descriptions directly into executable code that may include LLM calls, tool calls, and parallelization. Our approach comprises three components: (1) JIT-Planner, which generates multiple code plans, validates each against tool specifications, and selects the minimum-cost candidate; (2) JIT-Scheduler, which explores parallelization strategies via Monte Carlo cost estimation from learned latency distributions; and (3) an invariant-enforcing tool protocol specifying precondition and postcondition requirements to reduce the rate of incorrect tool use. Across five applications, JIT-Planner achieves 10.4times speedup and 28% higher accuracy over Browser-Use, while JIT-Scheduler achieves 2.4times speedup and 9\% higher accuracy over OpenAI CUA.

Current tool-use large language models (LLMs) are trained on static datasets, enabling them to interact with external tools and perform multi-step, tool-integrated reasoning, which produces tool-call trajectories. However, these models imitate how a query is resolved in a generic tool-call routine, thereby failing to explore possible solutions and demonstrating limited performance in an evolved, dynamic tool-call environment. In this work, we propose PORTool, a reinforcement learning (RL) method that encourages a tool-use LLM to explore various trajectories yielding the correct answer. Specifically, this method starts with generating multiple rollouts for a given query, and some of them share the first few tool-call steps, thereby forming a tree-like structure. Next, we assign rewards to each step, based on its ability to produce a correct answer and make successful tool calls. A shared step across different trajectories receives the same reward, while different steps under the same fork receive different rewards. Finally, these step-wise rewards are used to calculate fork-relative advantages, blended with trajectory-relative advantages, to train the LLM for tool use. The experiments utilize 17 tools to address user queries, covering both time-sensitive and time-invariant topics. We conduct ablation studies to systematically justify the necessity and the design robustness of step-wise rewards. Furthermore, we compare the proposed PORTool with other training approaches and demonstrate significant improvements in final accuracy and the number of tool-call steps.

Large Language Model (LLM) agents rely on external tools to perform multistage tasks. Existing agent frameworks typically assume that tool calls are atomic and return binary success or failure signals. However, real-world systems exhibit non-atomic behaviors such as timeouts after dispatch, delayed visibility, and partial state updates. These mismatches lead to reliability issues including duplicate actions, task success, and unnecessary tool executions. A lightweight, verification-aware tool wrapper is introduced that augments tool calls with postcondition verification, verify-before-retry logic, and idempotency keys. The approach is evaluated in a controlled simulated environment with injected non-atomic failures across multiple task templates. The results demonstrate that the proposed method significantly reduces duplicate actions, while maintaining comparable task success rates. Overall, the findings suggest that strengthening tool interaction semantics is a promising direction for improving LLM agent reliability without requiring modifications to the underlying language model.

Equipped with the capability to call functions, modern large language models (LLMs) can leverage external tools for addressing a range of tasks unattainable through language skills alone. However, the effective execution of these tools relies heavily not just on the advanced capabilities of LLMs but also on precise user instructions, which often cannot be ensured in the real world. To evaluate the performance of LLMs tool-use under imperfect instructions, we meticulously examine the real-world instructions queried from users, analyze the error patterns, and build a challenging tool-use benchmark called Noisy ToolBench (NoisyToolBench). We find that due to the next-token prediction training objective, LLMs tend to arbitrarily generate the missed argument, which may lead to hallucinations and risks. To address this issue, we propose a novel framework, Ask-when-Needed (AwN), which prompts LLMs to ask questions to users whenever they encounter obstacles due to unclear instructions. Moreover, to reduce the manual labor involved in user-LLM interaction and assess LLMs performance in tool utilization from both accuracy and efficiency perspectives, we design an automated evaluation tool named ToolEvaluator. Our experiments demonstrate that the AwN significantly outperforms existing frameworks for tool learning in the NoisyToolBench. We will release all related code and datasets to support future research.

As AI agents increasingly act through external tools, tool results are no longer simple outputs but execution artifacts that must remain correctly associated with the context that produced them. Yet as results persist across caches, recovery mechanisms, and shared runtime state, this association can break, causing a real and unmodified result to be consumed in an incompatible execution context and lead the agent to an unsafe action. We characterize this failure as tool-result misbinding. To systematically study this failure, we introduce ReplayBench, a benchmark that uses controlled tool-result replay to evaluate misbinding across 19 representative agent scenarios, 4 failure properties, and 3 replay mechanisms. Across eight LLMs, three agent frameworks, and diverse stateful workflows, we find widespread replay-induced failures, with a mean Final-State Error Rate of 0.649 under cross-task replay. Stage-wise analysis localizes these failures to model-side action generation. Further analyses show that replay susceptibility varies with task similarity, shows little dependence on object similarity, and remains high under result staleness and implicit environment changes. These findings motivate runtime validity mechanisms that eliminate final-state errors in our evaluated settings while preserving legitimate recovery. The results call for explicit contextual binding in tool-using agent runtimes. Our work is public at https://github.com/Phitooo/Replaybench.

Large Language Models (LLMs) currently struggle with tool invocation and chaining, as they often hallucinate or miss essential steps in a sequence. We propose RE-GAINS and EnChAnT, two novel frameworks that empower LLMs to tackle complex user queries by making API calls to external tools based on tool descriptions and argument lists. Tools are chained based on the expected output, without receiving the actual results from each individual call. EnChAnT, an open-source solution, leverages an LLM format enforcer, OpenChat 3.5 (an LLM), and ToolBench's API Retriever. RE-GAINS utilizes OpenAI models and embeddings with a specialized prompt based on the Reasoning via Planning (RAP) framework. Both frameworks are low cost (0.01\$ per query). Our key contribution is enabling LLMs for tool invocation and chaining using modifiable, externally described tools.

Production LLM agents often waste latency and reliability by regenerating code for the same procedural steps on every request. We replace this inference-time coding loop with an agentic tool-making pipeline that compiles repeated SOP steps into validated, versioned tools before deployment. The tool-maker grounds synthesis in the live environment as it collects execution traces, observes backend schemas and values, generates candidate tools, and repairs them against labeled cases. At runtime, the production agent calls these tools directly and falls back to code generation only when needed. We deploy the approach in a Fulfillment Center alarm-triage system, where an agent diagnoses alarms against a 44-node SOP over heterogeneous metric backends. In production, tool calls reduce p50 latency by 42%. On 1,500 historical alarms, they reduce end-to-end error rate by up to 53% by suppressing run-to-run variance in repeated steps. Because tools return compact structured verdicts, they also enable a simpler direct-call architecture, reducing p50 latency by a further 62% in a controlled ablation. Versioned tools also improve auditability and expose specification gaps and upstream data drift. Our results show that self-evolving agents can make industrial LLM systems faster, more reliable, and easier to operate.

Leveraging external tools is a key feature for modern Language Models (LMs) to expand their capabilities and integrate them into existing systems. However, existing benchmarks primarily focus on the accuracy of tool calling -- whether the correct tool is called with the correct parameters -- and less on evaluating when LMs should (not) call tools. We develop a new benchmark, When2Call, which evaluates tool-calling decision-making: when to generate a tool call, when to ask follow-up questions and when to admit the question can't be answered with the tools provided. We find that state-of-the-art tool-calling LMs show significant room for improvement on When2Call, indicating the importance of this benchmark. We also develop a training set for When2Call and leverage the multiple-choice nature of the benchmark to develop a preference optimization training regime, which shows considerably more improvement than traditional fine-tuning. We release the benchmark and training data as well as evaluation scripts at https://github.com/NVIDIA/When2Call.

Tool-augmented LLM agents call APIs whose intermediate outputs, such as presigned URLs, session tokens, and OAuth state parameters, are observation contracts: artifacts whose later use is constrained by the external system that produced them. We show that observation contract compliance (preserving the temporal validity and byte-level integrity) is an emergent, regression-prone capability: it is neither guaranteed by general tool-use ability nor consistently improved by larger or newer models. To measure this, we introduce ContractBench, a benchmark of 33 dual-axis tasks that probe two orthogonal failure modes no existing benchmark evaluates: validity failures (using an artifact after expiry) and integrity failures (corrupting an artifact's bytes through the observation-to-action pipeline). Our evaluation is deterministic and programmatic, with a virtual clock controlling time and SHA-256 hashes verifying byte integrity. We assign each outcome a failure label drawn from real-world API specifications. We evaluate 38 models and report four findings: (i) no evaluated model clears 80%, with Claude-Opus-4.6 leading at 77.8%, revealing that current frontier models still fail to comply with observation contracts; (ii) a sharp within-family capability cliff in Qwen 3.5 between 4B (0%) and 9B (56.6%), smoothing to 70.7% at 397B-A17B: what emerges across the cliff is mid-trajectory restraint, not tool-call competence; (iii) non-monotonic scaling across the GPT-5 family: agentic post-training can erode compliance through sycophancy-driven regression; (iv) our failure taxonomy works as an actionable in-context reward signal, yielding +7.1 pp on 42 paired GPT-5.1 failures.

Despite the advancements of open-source large language models (LLMs) and their variants, e.g., LLaMA and Vicuna, they remain significantly limited in performing higher-level tasks, such as following human instructions to use external tools (APIs). This is because current instruction tuning largely focuses on basic language tasks instead of the tool-use domain. This is in contrast to state-of-the-art (SOTA) LLMs, e.g., ChatGPT, which have demonstrated excellent tool-use capabilities but are unfortunately closed source. To facilitate tool-use capabilities within open-source LLMs, we introduce ToolLLM, a general tool-use framework of data construction, model training and evaluation. We first present ToolBench, an instruction-tuning dataset for tool use, which is created automatically using ChatGPT. Specifically, we collect 16,464 real-world RESTful APIs spanning 49 categories from RapidAPI Hub, then prompt ChatGPT to generate diverse human instructions involving these APIs, covering both single-tool and multi-tool scenarios. Finally, we use ChatGPT to search for a valid solution path (chain of API calls) for each instruction. To make the searching process more efficient, we develop a novel depth-first search-based decision tree (DFSDT), enabling LLMs to evaluate multiple reasoning traces and expand the search space. We show that DFSDT significantly enhances the planning and reasoning capabilities of LLMs. For efficient tool-use assessment, we develop an automatic evaluator: ToolEval. We fine-tune LLaMA on ToolBench and obtain ToolLLaMA. Our ToolEval reveals that ToolLLaMA demonstrates a remarkable ability to execute complex instructions and generalize to unseen APIs, and exhibits comparable performance to ChatGPT. To make the pipeline more practical, we devise a neural API retriever to recommend appropriate APIs for each instruction, negating the need for manual API selection.

Equipping Large Language Models (LLMs) with external tools enables them to solve complex real-world problems. However, the robustness of existing methods remains a critical challenge when confronting novel or evolving tools. Existing trajectory-centric paradigms primarily rely on memorizing static solution paths during training, which limits the ability of LLMs to generalize tool usage to newly introduced or previously unseen tools. In this paper, we propose ToolMaster, a framework that shifts tool use from imitating golden tool-calling trajectories to actively learning tool usage through interaction with the environment. To optimize LLMs for tool planning and invocation, ToolMaster adopts a trial-and-execution paradigm, which trains LLMs to first imitate teacher-generated trajectories containing explicit tool trials and self-correction, followed by reinforcement learning to coordinate the trial and execution phases jointly. This process enables agents to autonomously explore correct tool usage by actively interacting with environments and forming experiential knowledge that benefits tool execution. Experimental results demonstrate that ToolMaster significantly outperforms existing baselines in terms of generalization and robustness across unseen or unfamiliar tools. All code and data are available at https://github.com/NEUIR/ToolMaster.

Large language models (LLMs) have displayed massive improvements in reason- ing and decision-making skills and can hold natural conversations with users. Many recent works seek to augment LLM-based assistants with external tools so they can access private or up-to-date information and carry out actions on behalf of users. To better measure the performance of these assistants, this paper introduces ToolTalk, a benchmark consisting of complex user intents re- quiring multi-step tool usage specified through dialogue. ToolTalk contains 28 tools grouped into 7 plugins, and includes a complete simulated implementa- tion of each tool, allowing for fully automated evaluation of assistants that rely on execution feedback. ToolTalk also emphasizes tools that externally affect the world rather than only tools for referencing or searching information. We evaluate GPT-3.5 and GPT-4 on ToolTalk resulting in success rates of 26% and 50% respectively. Our analysis of the errors reveals three major categories and suggests some future directions for improvement. We release ToolTalk at https://github.com/microsoft/ToolTalk.

Tool-using LLM agents increasingly coordinate real workloads by selecting and chaining third-party tools based on text-visible metadata such as tool names, descriptions, and return messages. We show that this convenience creates a supply-chain attack surface: a malicious MCP tool server can be co-registered alongside normal tools and induce overthinking loops, where individually trivial or plausible tool calls compose into cyclic trajectories that inflate end-to-end tokens and latency without any single step looking abnormal. We formalize this as a structural overthinking attack, distinguishable from token-level verbosity, and implement 14 malicious tools across three servers that trigger repetition, forced refinement, and distraction. Across heterogeneous registries and multiple tool-capable models, the attack causes severe resource amplification (up to 142.4times tokens) and can degrade task outcomes. Finally, we find that decoding-time concision controls do not reliably prevent loop induction, suggesting defenses should reason about tool-call structure rather than tokens alone.

Large language models (LLMs) are increasingly expected to orchestrate diverse tools over long-horizon tasks. Existing agents typically use Direct Tool Calling (DTC), where the model invokes tools sequentially, and tool responses accumulate in the model context, which can lead to context rot and orchestration breakdown. In contrast, Programmatic Tool Calling (PTC) invokes tools through executable code and stores intermediate results in runtime variables rather than appending them to the context. Prior work has explored PTC mainly as an inference-time optimization, but its benefits for agentic training remain unclear, and suitable verifiable training tasks are scarce. In this work, we introduce ProgAgent, a full PTC training stack, comprising a pipeline for synthesizing verifiable long-horizon tasks, a lightweight PTC runtime, and a two-stage training recipe. Using only 215 tasks instantiated at four environment scales, ProgAgent yields higher pass rates than the evaluated baselines of comparable size across four benchmarks. On LOCA-bench, ProgAgent-14B achieves a 30.7% pass rate at a 64k-token environment state, where these baselines score zero. Cross-harness experiments show that PTC-trained models outperform DTC-trained models under both evaluation interfaces, suggesting that the benefits of PTC training extend beyond the interface.

Tool-using LLM agents still struggle in open-world settings with large tool pools, long-horizon objectives, wild constraints, and unreliable tool states. For scalable and realistic training and testing, we introduce an open-world tool-using environment, built on 5,571 format unified tools across 204 commonly used apps. It includes a task creation engine that synthesizes long-horizon, multi-tool workflows with wild constraints, and a state controller that injects interruptions and failures to stress-test robustness. On top of this environment, we develop a tool select-then-execute agent framework with a planner-actor decomposition to separate deliberate reasoning and self-correction from step-wise execution. Comprehensive evaluation of state-of-the-art LLMs reveals the misalignment between tool planning and execution abilities, the constraint following weakness of existing LLMs, and DeepSeek-v3.2's strongest robustness. Finally, we collect 1,170 trajectories from our environment to fine-tune LLMs, achieving superior performance to baselines using 119k samples, indicating the environment's value as both a realistic benchmark and a data engine for tool-using agents. Our code and data will be publicly released.

Large language model (LLM)-based agents increasingly rely on tool use to complete real-world tasks. While existing works evaluate the LLMs' tool use capability, they largely focus on the final answers yet overlook the detailed tool usage trajectory, i.e., whether tools are selected, parameterized, and ordered correctly. We introduce TRAJECT-Bench, a trajectory-aware benchmark to comprehensively evaluate LLMs' tool use capability through diverse tasks with fine-grained evaluation metrics. TRAJECT-Bench pairs high-fidelity, executable tools across practical domains with tasks grounded in production-style APIs, and synthesizes trajectories that vary in breadth (parallel calls) and depth (interdependent chains). Besides final accuracy, TRAJECT-Bench also reports trajectory-level diagnostics, including tool selection and argument correctness, and dependency/order satisfaction. Analyses reveal failure modes such as similar tool confusion and parameter-blind selection, and scaling behavior with tool diversity and trajectory length where the bottleneck of transiting from short to mid-length trajectories is revealed, offering actionable guidance for LLMs' tool use.

Full-duplex speech-to-speech (S2S) models provide natural, low-latency conversational interaction and would benefit from the ability to use external tools and complete voice-agent tasks. We propose a frontend-backend architecture where a duplex speech-to-text frontend learns to emit a delegation token and forwards streaming ASR transcripts to a text-based backend LLM for tool calls. Tool-call results from the backend are injected back into the frontend through a lightweight prefill-and-repeat mechanism and then synthesized using streaming TTS to the user. Our approach largely preserves regular duplex turn-taking, interruption handling, and low-latency interaction as it requires minimal modifications to the frontend model. In a single-turn tool-call evaluation, our system achieves 92-97% tool-call recall, competitive tool-call prediction performance, and 81.2% accuracy in rejecting irrelevant calls. When equipped with a larger backend (e.g., Qwen3-235B-A22B), our system achieves competitive results on Full-Duplex-Bench-V3 compared to open and closed source models, and significantly outperforms GPT-realtime-mini and Qwen3-Omni-30B-A3B-Instruct on EVA-Bench. These results demonstrate that backend delegation is an effective and modular approach for combining natural duplex speech interaction with strong agentic tool-call capabilities.

Tool-augmented speech assistants typically serialize automatic speech recognition, large language model inference, and external tool execution. As a result, tool latency is incurred only after the user has finished speaking and the LLM has identified the required tool calls. We present speculative tool execution for on-device cascaded voice agents, which predicts tool requests from partial ASR hypotheses and initiates tool execution while speech is still being received, thereby reducing end-to-end response latency. Our approach introduces a Predictor module that anticipates tool calls during speech recognition, executes them speculatively, and caches the results. The cached outputs are then injected into the LLM prompt, enabling faster responses. Additionally, to mitigate errors caused by user self-corrections during speech, we employ a rule-based validation mechanism that selectively injects only valid cached results. As a final safeguard, the LLM retains the ability to issue tool calls directly, ensuring that the latency of our framework is upper-bounded by the baseline serial execution pipeline in the worst case. We evaluate our method using live measurements from a fully implemented Android voice assistant. Our approach reduces the median time-to-first-audio from 5.79,s to 4.60,s and decreases the standard deviation from 3.49,s to 2.81,s, resulting in more predictable response latency.

Tool calling allows large language models (LLMs) to interact with external systems like APIs, enabling applications in customer support, data analysis, and dynamic content generation. While recent benchmarks have advanced tool-use research, they suffer from key limitations, including reliance on simulated or restricted APIs, limited reproducibility, and a lack of cultural and geographic diversity. To address these gaps, we introduce International Tool Calling (ITC), a large-scale, multilingual benchmark designed for realistic, globally distributed tool-calling scenarios. ITC includes 3,571 real APIs and 17,540 tool calling tasks across 20 categories and 40 countries. Experiments reveal substantial performance gaps between open- and closed-source LLMs, while fine-tuning on ITC yields significant improvements, particularly for non-English queries, enhancing cross-lingual generalization, reasoning consistency, and robustness to out-of-domain tools. ITC provides a valuable benchmark for advancing LLM robustness and performance in complex, multi-tool, and international scenarios. Dataset: https://anonymous.4open.science/r/International-Tool-Calling-ITC-dataset-FAF4/.

Tool-using LLM agents are mostly evaluated assuming all tools work. When a tool times out, returns a week-stale value, or has its description poisoned in deployment, the developer needs a controlled way to reproduce the failure, test a fix, and confirm the fix worked before deployment. We present AgentCheck, an open-source web workbench that turns an MCP server into an intervention surface. AgentCheck runs an agent against its real tools and records every tool response, then re-runs the agent with the response perturbed by a fault (12 types) injector. Matching tool calls are replayed from cache, and later tool calls go live after the agent diverges. This yields a reproduce-intervene-confirm loop: the developer toggles a mitigation, re-runs against the identical fault, and sees if the failure goes away. Scoring has two parts: deterministic pass/fail rules, plus an LLM judge for interpretive labels, validated against human annotations. Across five agents, the best passes 105/120 scenarios and the weakest only 77. The failures are usually silent, confident use of incorrect tool outputs rather than crashes. On the weakest agent, a retry mitigation raises success on timeout error faults from as few as 30% of cases to 100%, whereas stale-data faults remain near 3-4 of 10 regardless of the mitigation. AgentCheck makes these failure modes reproducible, comparable, and verifiable before deployment.

Computer Use Agents (CUAs) can act through both atomic GUI actions, such as click and type, and high-level tool calls, such as API-based file operations, but this hybrid action space often leaves them uncertain about when to continue with GUI actions or switch to tools, leading to suboptimal execution paths. This difficulty stems from the scarcity of high-quality interleaved GUI-Tool trajectories, the cost and brittleness of collecting real tool trajectories, and the lack of trajectory-level supervision for GUI-Tool path selection. In this paper, we propose ToolCUA, an end-to-end agent designed to learn optimal GUI-Tool path selection through a staged training paradigm. We first introduce an Interleaved GUI-Tool Trajectory Scaling Pipeline that repurposes abundant static GUI trajectories and synthesizes a grounded tool library, enabling diverse GUI-Tool trajectories without manual engineering or real tool-trajectory collection. We then perform Tool-Bootstrapped GUI RFT, combining warmup SFT with single-turn RL to improve decisions at critical GUI-Tool switching points. Finally, we optimize ToolCUA with Online Agentic RL in a high-fidelity GUI-Tool environment, guided by a Tool-Efficient Path Reward that encourages appropriate tool use and shorter execution paths. Experiments on OSWorld-MCP show that ToolCUA achieves 46.85% accuracy, a relative improvement of approximately 66% over the baseline, establishing a new state of the art among models of comparable scale. It also improves by 3.9% over GUI-only settings, demonstrating effective GUI-Tool orchestration. The results further suggest that training in a hybrid action space is a promising paradigm for real-world digital agents. Open-sourced here: https://x-plug.github.io/ToolCUA/

The deployment of Large Language Models (LLMs) as agentic orchestrators has revolutionized task automation, but the need for privacy-preserving, cost-effective solutions demands on-device inference capabilities. However, local LLMs consistently underperform compared to frontier models in tool calling scenarios, struggling with both tool selection from large tool sets and accurate argument generation for complex parameter structures. We introduce a methodology that disaggregates a tool-calling task into two distinct subtasks: tool selection and argument generation. We propose "decoupled fine-tuning", a novel post-training approach that employs LoRA fine-tuning to create dedicated LoRA adapters for tool selection and tool-specific argument generation using separate loss masking for each of the subtasks. Furthermore, we present DualTune, an inference framework that leverages the LoRA adapters created using decoupled fine-tuning to perform efficient agent orchestration with the help of local models on end-user devices. DualTune decomposes the tool-call generation step into tool selection and argument generation, and dynamically loads the corresponding LoRA adapters to generate tool calls. Additionally, DualTune implements hierarchical orchestration to restrict the number of tools required for tool selection. Our experiments on the MCP-Bench benchmark demonstrate that the Qwen-2.5-7B model trained using decoupled fine-tuning improves the tool calling accuracy of the base model by 46%, and outperforms other local reasoning, non-reasoning and fine-tuned models of similar size in all cases, and models that are 2x larger, in most cases.

While Large Language Models (LLMs) have demonstrated enhanced capabilities in function-calling, these advancements primarily rely on accessing the functions' responses. This methodology is practical for simpler APIs but faces scalability issues with irreversible APIs that significantly impact the system, such as a database deletion API. Similarly, processes requiring extensive time for each API call and those necessitating forward planning, like automated action pipelines, present complex challenges. Furthermore, scenarios often arise where a generalized approach is needed because algorithms lack direct access to the specific implementations of these functions or secrets to use them. Traditional tool planning methods are inadequate in these cases, compelling the need to operate within black-box environments. Unlike their performance in tool manipulation, LLMs excel in black-box tasks, such as program synthesis. Therefore, we harness the program synthesis capabilities of LLMs to strategize tool usage in black-box settings, ensuring solutions are verified prior to implementation. We introduce TOPGUN, an ingeniously crafted approach leveraging program synthesis for black box tool planning. Accompanied by SwissNYF, a comprehensive suite that integrates black-box algorithms for planning and verification tasks, addressing the aforementioned challenges and enhancing the versatility and effectiveness of LLMs in complex API interactions. The public code for SwissNYF is available at https://github.com/iclr-dummy-user/SwissNYF.

Large language models (LLMs) can now access a wide range of external tools, thanks to the Model Context Protocol (MCP). This greatly expands their abilities as various agents. However, LLMs rely entirely on the text descriptions of tools to decide which ones to use--a process that is surprisingly fragile. In this work, we expose a vulnerability in prevalent tool/function-calling protocols by investigating a series of edits to tool descriptions, some of which can drastically increase a tool's usage from LLMs when competing with alternatives. Through controlled experiments, we show that tools with properly edited descriptions receive over 10 times more usage from GPT-4.1 and Qwen2.5-7B than tools with original descriptions. We further evaluate how various edits to tool descriptions perform when competing directly with one another and how these trends generalize or differ across a broader set of 10 different models. These phenomenons, while giving developers a powerful way to promote their tools, underscore the need for a more reliable foundation for agentic LLMs to select and utilize tools and resources.

Hybrid computer-use agents can act through screenshots or call text tools. We find that having a tool available does not settle which way the effect goes. Under one identical GUI-MCP harness on the OSWorld-MCP benchmark (309 tasks), the same MCP tools improve a reasoning model by +4.0pp and degrade a non-reasoning model by -5.9pp (5 runs each, both beyond 2 SE). What separates the two is tool-decision behavior. The non-reasoning policy ignores, misnames, or falsely terminates around tools. The reasoning model avoids these failures, yet still calls a tool on only 55/309 tasks, 23.9% of the tool-reachable ones. We call this shortfall the adoption gap. Both levels of the problem share one cause: the model already has a cheaper route and is never trained to take it. Multi-turn RL probes that cause. At the action level, a dense tool bonus raises spreadsheet adoption 0.03 -> 0.33 and carries into greedy decoding, but held-out accuracy does not follow. Behavior is steerable; competence is not. The bottleneck lies in tool-call semantics. At the context level, a successful tool call often makes the next screenshot redundant. Dropping it and halving image history cuts input tokens by about a third, at a small accuracy cost. Retraining under the same observation rule removes that cost. The compressed agent then reaches 37.8% against 33.0% for the uncompressed operating point, at 53% of the input cost, and closes the rich-lean gap on a pre-registered degraded subset to zero. Tools help when the model chooses and integrates them, and current hybrid agents leave many such choices unused. Code and checkpoints: https://github.com/redai-infra/hybrid-routing-agent

Every major LLM agent framework gives the LLM the role of orchestrator; the model decides what to do next, when to call tools, and when to stop. We argue that token explosion, control-flow hallucination, and unreliable completion are not implementation bugs but architectural consequences of assigning the deterministic work of looping, branching, and sequencing to a probabilistic system. A better prompt or a stronger model cannot guarantee the reliability of the LLM agent. We therefore propose Agentic Programming, in which the program governs all control flow, and the LLM is itself part of it, an adaptive component we call LLM-as-Code and invoke only where a task calls for reasoning or generation. Within each call the model keeps full flexibility, but it cannot alter the program's execution path. With control in the program, the LLM's context is built from the execution history's call tree and forms a directed acyclic graph (DAG). Each call's context length is then determined by its call depth rather than by accumulation over steps. A case study of computer-use agents shows that the design is practical, not just a theoretical stance, substantially improving the stability of long visual operation sequences.

Compact language models (LMs) reduce cost, latency, and deployment risk for tool agents. Yet MCP-style tool use requires more than isolated function calling: an agent must discover tools from live catalogs, satisfy schemas, preserve dependencies across intermediate outputs, and ground final responses in executed evidence. Small planners often generate plausible workflow graphs that fail under tool resolution, parameter validation, dependency tracking, or execution. We argue that this failure mode is poorly handled by small-corpus distillation. A few hundred teacher traces can teach workflow format, but rarely cover the recovery behavior needed to repair failed plans over changing tool catalogs. We introduce Evoflux, an inference-time evolutionary search method that treats compact tool use as the repair of executable tool workflows. It evolves typed workflow graphs through structured edits, execution feedback, adaptive intensity, meta-guided redesign, and diversity pruning. On held-out MCP-Bench tasks spanning live MCP servers and 250 tools, Evoflux raises execution feasibility from roughly 3% to 17-24% across small planners. In contrast, SFT and SFT+DPO on the same search-mined data match, underperform, or collapse below zero-shot performance; ReAct reaches higher peaks, but with higher variance and token cost. These results show that execution-grounded search is more reliable under scarce teacher-trace budgets.

Tool-using language-model agents often execute actions that their domain policies forbid. We present LeanGuard, a runtime that checks every proposed tool call against a policy written in Lean4 before the call reaches the environment. Policies combine state predicates with scoped past-time temporal operators over the execution history, evaluation is fail-closed, and the decision procedure is proved equivalent to a LeanLTL semantics. A denied call can be corrected in two ways. With feedback, the agent receives the violated rule and a hint; with proof-guided repair, Lean metaprogramming searches for a nearby call that preserves the user's intent and proves that the policy admits it, without the model. On Tau-Bench with five Qwen models (0.8B-27B), unguarded agents execute at least 33 calls that the Lean policy forbids, while LeanGuard executes none; with feedback, task success does not change significantly. On DTap, LeanGuard reduces direct prompt-injection success from 57.9% to 5.9%, and in telecom, where benign tasks need no writes, benign success is unchanged. Feedback reduces repeated blocked calls and raises task success for four of five models over a bare denial. On replayed denials, repair proves an admissible edit for 88 of 252 denials caused by argument values, in a median of 2,ms.

Tool-using automation systems, from scripts and CI bots to agentic assistants, fail in recurring patterns. Common failures include unsafe side effects, invalid arguments, uncontrolled retries, and leakage of sensitive outputs. Many mitigations are model-centric and prompt-dependent, so they are brittle and do not generalize to non-LLM callers. We present Policy-First Tooling, a model-agnostic permission layer that mediates tool invocation through explicit constraints, risk-aware gating, recovery controls, and auditable explanations. The paper contributes a compact policy DSL, a runtime enforcement architecture with actionable rationale and fix hints, and a reproducible benchmark based on trace replay with controlled fault and misuse injection. In 225 controlled runs across five policy packs and three fault profiles, stricter packs improve violation prevention from 0.000 in P0 to 0.681 in P4, while task success drops from 0.356 to 0.067. Retry amplification decreases from 3.774 in P0 to 1.378 in P4, and leakage recall reaches 0.875 under injected secret outputs. These results make safety to utility trade-offs explicit and measurable.

Agentic software-engineering and industrial systems increasingly operate through executable workflows rather than code genera- tion alone: they search artifacts, invoke tools, inspect structured observations, and query databases. Training these agents requires supervision data that captures valid tool interactions and executable workflows. However, traditional query-first data synthesis can fail because plausible user requests may not correspond to valid tool sequences, compatible parameters, or available data. To address this limitation, we propose SyntheticAgentTraceQA, an execution- first framework for generating scalable supervision data for tool- augmented agents. Our framework first constructs high-level work- flow structures, maps them to available tools through dependency- aware assignment, executes and validates the resulting traces in con- trolled environments, and only then synthesizes natural-language user tasks, teacher-generated reasoning annotations, and reference answers. We evaluate the framework across four tool ecosystems and use the resulting data to fine-tune and evaluate Qwen model variants. The results show that execution-grounded supervision improves tool execution behavior, reference-trace agreement, and answer-generation performance on the evaluated tasks. Further analysis reveals a supervision trade-off: masked supervision, which excludes reasoning annotations from the training objective, im- proves final-answer metrics, whereas full supervision, computing loss over the complete assistant output including reasoning tokens, underperforms on answer quality and does not consistently im- prove reference-trace agreement, particularly at the 9B scale. These findings highlight the importance of designing synthetic supervi- sion according to the desired capabilities of tool-augmented agents.

Effective evaluation of multi-hop tool use is critical for analyzing the understanding, reasoning, and function-calling capabilities of large language models (LLMs). However, progress has been hindered by a lack of reliable evaluation datasets. To address this, we present ToolHop, a dataset comprising 995 user queries and 3,912 associated tools, specifically designed for rigorous evaluation of multi-hop tool use. ToolHop ensures diverse queries, meaningful interdependencies, locally executable tools, detailed feedback, and verifiable answers through a novel query-driven data construction approach that includes tool creation, document refinement, and code generation. We evaluate 14 LLMs across five model families (i.e., LLaMA3.1, Qwen2.5, Gemini1.5, Claude3.5, and GPT), uncovering significant challenges in handling multi-hop tool-use scenarios. The leading model, GPT-4o, achieves an accuracy of 49.04%, underscoring substantial room for improvement. Further analysis reveals variations in tool-use strategies for various families, offering actionable insights to guide the development of more effective approaches. Code and data can be found in https://huggingface.co/bytedance-research/ToolHop.

Recent large language models (LLMs) advancements sparked a growing research interest in tool assisted LLMs solving real-world challenges, which calls for comprehensive evaluation of tool-use capabilities. While previous works focused on either evaluating over stateless web services (RESTful API), based on a single turn user prompt, or an off-policy dialog trajectory, ToolSandbox includes stateful tool execution, implicit state dependencies between tools, a built-in user simulator supporting on-policy conversational evaluation and a dynamic evaluation strategy for intermediate and final milestones over an arbitrary trajectory. We show that open source and proprietary models have a significant performance gap, and complex tasks like State Dependency, Canonicalization and Insufficient Information defined in ToolSandbox are challenging even the most capable SOTA LLMs, providing brand-new insights into tool-use LLM capabilities. ToolSandbox evaluation framework is released at https://github.com/apple/ToolSandbox

Large language models (LLMs) increasingly rely on external tools and APIs to execute complex tasks specified in natural language. Evaluating such tool calling capabilities in realistic enterprise settings is challenging: APIs are often proprietary, heterogeneous, and difficult to share, limiting reproducible benchmarks. To address this, we introduce Live API Bench, a comprehensive benchmark constructed by transforming NL2SQL datasets into interactive API environments. Our pipeline converts SQL queries from BIRD SQL into executable API sequences across three formulations SLOT, SEL, and REST covering minimal general purpose operations, domain specific multi step tasks, and function oriented RESTful interactions, respectively. The benchmark spans 11 databases with over 2,500 invocable tools, paired with human authored queries, ground truth API sequences, and verified final answers. Live API Bench enables systematic evaluation of core challenges in tool use, including error handling, sequential reasoning, parameter generation, response parsing, and robustness across diverse domains. We evaluate 10 LLMs and 4 ReACT agents, observing low task completion rates (7 to 47pct), which improve modestly to 50pct under interactive agent settings, highlighting substantial scope for improving LLM tool calling performance. We release all code and data associated with this paper.

Long-horizon agents must complete workflows in which later activities depend on earlier outputs and changes to shared state. A key challenge for evaluation is to expand task requirements and their dependencies while keeping tasks executable and outcomes verifiable. We introduce SkillHorizon, a benchmark that constructs long-horizon tasks through skill composition in seven business environments. Its generators use domain-specific rules to turn reusable skill procedures into concrete business activities. These activities are connected through input-output dependencies, shared resources, and state updates, allowing workload and coordination demands to grow together. Successful reference executions validate task feasibility and measure interaction workload, while programmatic evaluators assess local completion and whole-task success. We evaluate five language models on 1,050 tasks with reference interaction workloads ranging from 64K to 1M tokens. Across these scales, mean local-goal completion falls from 90.4% to 46.8%, as completed work fails to keep pace with growing requirements. At larger workloads, agents more often submit unsuccessful final answers with substantial work unfinished and tool-call allowance remaining. Trace analysis also identifies cases where scripts execute successfully but their outputs fail downstream business checks. SkillHorizon provides a configurable testbed for studying sustained progress, dependency coordination, and complete task delivery in growing workflows. Our code is available at https://github.com/KnowComp/SkillHorizon.

Recent studies on software tool manipulation with large language models (LLMs) mostly rely on closed model APIs. The industrial adoption of these models is substantially constrained due to the security and robustness risks in exposing information to closed LLM API services. In this paper, we ask can we enhance open-source LLMs to be competitive to leading closed LLM APIs in tool manipulation, with practical amount of human supervision. By analyzing common tool manipulation failures, we first demonstrate that open-source LLMs may require training with usage examples, in-context demonstration and generation style regulation to resolve failures. These insights motivate us to revisit classical methods in LLM literature, and demonstrate that we can adapt them as model alignment with programmatic data generation, system prompts and in-context demonstration retrievers to enhance open-source LLMs for tool manipulation. To evaluate these techniques, we create the ToolBench, a tool manipulation benchmark consisting of diverse software tools for real-world tasks. We demonstrate that our techniques can boost leading open-source LLMs by up to 90% success rate, showing capabilities competitive to OpenAI GPT-4 in 4 out of 8 ToolBench tasks. We show that such enhancement typically requires about one developer day to curate data for each tool, rendering a recipe with practical amount of human supervision.

Large Language Models (LLMs) augmented with external tools have demonstrated remarkable capabilities in complex reasoning tasks. However, existing frameworks rely heavily on natural language reasoning to determine when tools can be invoked and whether their results should be committed, lacking formal guarantees for logical safety and verifiability. We present ToolGate, a forward execution framework that provides logical safety guarantees and verifiable state evolution for LLM tool calling. ToolGate maintains an explicit symbolic state space as a typed key-value mapping representing trusted world information throughout the reasoning process. Each tool is formalized as a Hoare-style contract consisting of a precondition and a postcondition, where the precondition gates tool invocation by checking whether the current state satisfies the required conditions, and the postcondition determines whether the tool's result can be committed to update the state through runtime verification. Our approach guarantees that the symbolic state evolves only through verified tool executions, preventing invalid or hallucinated results from corrupting the world representation. Experimental validation demonstrates that ToolGate significantly improves the reliability and verifiability of tool-augmented LLM systems while maintaining competitive performance on complex multi-step reasoning tasks. This work establishes a foundation for building more trustworthy and debuggable AI systems that integrate language models with external tools.

Tool selection is a key component of LLM agents. A popular approach follows a two-step process - retrieval and selection - to pick the most appropriate tool from a tool library for a given task. In this work, we introduce ToolHijacker, a novel prompt injection attack targeting tool selection in no-box scenarios. ToolHijacker injects a malicious tool document into the tool library to manipulate the LLM agent's tool selection process, compelling it to consistently choose the attacker's malicious tool for an attacker-chosen target task. Specifically, we formulate the crafting of such tool documents as an optimization problem and propose a two-phase optimization strategy to solve it. Our extensive experimental evaluation shows that ToolHijacker is highly effective, significantly outperforming existing manual-based and automated prompt injection attacks when applied to tool selection. Moreover, we explore various defenses, including prevention-based defenses (StruQ and SecAlign) and detection-based defenses (known-answer detection, DataSentinel, perplexity detection, and perplexity windowed detection). Our experimental results indicate that these defenses are insufficient, highlighting the urgent need for developing new defense strategies.

Scaling test-time computation improves performance across different tasks on large language models (LLMs), which has also been extended to tool-augmented agents. For these agents, scaling involves not only "thinking" in tokens but also "acting" via tool calls. The number of tool calls directly bounds the agent's interaction with the external environment. However, we find that simply granting agents a larger tool-call budget fails to improve performance, as they lack "budget awareness" and quickly hit a performance ceiling. To address this, we study how to scale such agents effectively under explicit tool-call budgets, focusing on web search agents. We first introduce the Budget Tracker, a lightweight plug-in that provides the agent with continuous budget awareness, enabling simple yet effective scaling. We further develop BATS (Budget Aware Test-time Scaling), an advanced framework that leverages this awareness to dynamically adapt its planning and verification strategy, deciding whether to "dig deeper" on a promising lead or "pivot" to new paths based on remaining resources. To analyze cost-performance scaling in a controlled manner, we formalize a unified cost metric that jointly accounts for token and tool consumption. We provide the first systematic study on budget-constrained agents, showing that budget-aware methods produce more favorable scaling curves and push the cost-performance Pareto frontier. Our work offers empirical insights toward a more transparent and principled understanding of scaling in tool-augmented agents.

LLM agents are increasingly deployed as executable systems that use tools, modify workspaces, and produce concrete artifacts. In such workflows, performance depends not only on the base model, but also on the harness: the system layer that manages context, tools, state, constraints, permissions, tracing, and recovery. However, existing benchmarks typically abstract away execution, compare complete agent systems, or hold the harness fixed, making execution-layer variation difficult to study. We introduce Harness-Bench, a diagnostic benchmark for evaluating configuration-level harness effects in realistic agent workflows. Harness-Bench evaluates representative harness configurations across multiple model backends under shared task environments, budgets, and evaluation protocols, while preserving each harness's native execution behavior. The benchmark contains 106 sandboxed offline tasks constructed from practical agent-use patterns and manually reviewed for realism, solvability, oracle-checkability, and integrity. Each run records final artifacts, execution traces, usage statistics, and validator outputs, enabling analysis beyond final completion. Across 5,194 execution trajectories, we observe substantial variation in completion, process quality, efficiency, and failure behavior across model-harness pairings. These results suggest that agent capability should be reported at the model-harness configuration level rather than attributed to the base model alone. Our analysis further identifies recurring execution-alignment failures, where plausible reasoning becomes decoupled from tool feedback, workspace state, evidence, or verifiable output contracts. Harness-Bench provides a reproducible foundation for diagnosing and improving reliable, efficient, and auditable agent execution stacks.

Large language models are deployed as long-horizon agents that compose diverse tools across MCP services into executable workflows. Existing MCP environment-scaling methods are data-centric: they first synthesize a database and scenario, then derive tools and tasks from them. As a result, tool interfaces may not match real ones, tool compositions are not grounded in execution, and tasks rarely span more than one environment. We propose ToolSpace, a tool-centric framework that reverses this order. ToolSpace mines data, state, and retry dependencies from adjacent calls in execution traces of real MCP services and open agent corpora, using deterministic rules rather than LLM judgment, and clusters the resulting weighted tool-composition graph into environments. Databases are synthesized only for state-mutating environments, while query and stateless tools replay recorded returns. ToolSpace then performs state-aware random walks with rollback and decompiles each chain into a natural-language task with assertion-based checks, keeping only samples that replay successfully from the initial state. Applied to AutomationBench and tau3-Bench Banking, the pipeline produces harder Pro versions on which 7 frontier models drop by up to 38.2 points. Across seven long-horizon tool-use benchmarks, ToolSpace raises Qwen3.6-35B-A3B from 23.0 to 41.0 average score (43.2 with RL) and GLM-5.2 from 44.6 to 56.6, on par with Claude Opus 5. Ablations show that execution-witnessed edges clearly outperform LLM-judged ones, and performance keeps improving with data and environment scale.

With advances in decision-making and reasoning capabilities, multimodal agents show strong potential in computer application scenarios. Past evaluations have mainly assessed GUI interaction skills, while tool invocation abilities, such as those enabled by the Model Context Protocol (MCP), have been largely overlooked. Comparing agents with integrated tool invocation to those evaluated only on GUI interaction is inherently unfair. We present OSWorld-MCP, the first comprehensive and fair benchmark for assessing computer-use agents' tool invocation, GUI operation, and decision-making abilities in a real-world environment. We design a novel automated code-generation pipeline to create tools and combine them with a curated selection from existing tools. Rigorous manual validation yields 158 high-quality tools (covering 7 common applications), each verified for correct functionality, practical applicability, and versatility. Extensive evaluations of state-of-the-art multimodal agents on OSWorld-MCP show that MCP tools generally improve task success rates (e.g., from 8.3% to 20.4% for OpenAI o3 at 15 steps, from 40.1% to 43.3% for Claude 4 Sonnet at 50 steps), underscoring the importance of assessing tool invocation capabilities. However, even the strongest models have relatively low tool invocation rates, Only 36.3%, indicating room for improvement and highlighting the benchmark's challenge. By explicitly measuring MCP tool usage skills, OSWorld-MCP deepens understanding of multimodal agents and sets a new standard for evaluating performance in complex, tool-assisted environments. Our code, environment, and data are publicly available at https://osworld-mcp.github.io.

Tool-using agents are increasingly expected to operate across realistic professional workflows, where they must interpret multimodal inputs, coordinate external tools, inspect intermediate artifacts, and revise their actions before producing a final result. Existing benchmarks, however, often evaluate tool use, computer use, and multimodal reasoning in isolation, leaving a gap between benchmark settings and end-to-end omni-modal tool use in the real world. To address this gap, we introduce MM-ToolBench, a benchmark and evaluation harness for task-oriented omni-modal tool use. MM-ToolBench contains 100 executable tasks from two macro task families, Customer Service and Intelligent Creation, covering 20 subcategory slices and supported by 27 MCP servers with 324 tools. The central design of MM-ToolBench is closed-loop multimodal verification: agents must execute tools, inspect rendered or transformed artifacts, and self-correct when outputs fail task-specific requirements. To make such evaluation scalable and verifiable, MM-ToolBench couples MCP-based execution with task-specific grounded evaluators and a semi-automated construction pipeline for scenario discovery, task instantiation, evaluator synthesis, and human audit. Experiments on 15 contemporary agentic models show that MM-ToolBench remains highly challenging: Claude Opus 4.6, commonly regarded as one of the strongest coding-agent models, achieves only 32.0% task success, far below the 94.0% human benchmark. We envision MM-ToolBench as a practical foundation for evaluating and advancing next-generation omni-modal tool-using agents through closed-loop multimodal verification.

We introduce MM-ToolSandBox, a benchmark and evaluation framework for visually grounded tool-calling agents. The framework provides a stateful execution environment spanning 500+ tools across 16 application domains, supporting multi-image, multi-turn tasks where agents must ground progressively arriving visual inputs into executable tool calls while handling realistic conversational phenomena (goal revisions, error corrections, state mutations). An automated scenario generation pipeline produces diverse, visually grounded scenarios through information-flow-guided planning and multi-stage quality filtering, yielding 258 human-verified nominal scenarios and 50 variants targeting interactive UI applications. Evaluating 12 state-of-the-art models, from 4B open-weight to frontier proprietary systems, shows that current models still lack robust visual tool-calling capability: even the best model achieves below 50% success rate. Our failure analysis further reveals that visual precision, not only planning, is a primary bottleneck for capable models: 53% of failures stem from incorrect information extraction from images despite otherwise correct task workflows. A planning-to-precision crossover emerges with scale: smaller models fail at deciding what to do, while larger models fail at perceiving what they see, suggesting fundamentally different research directions for improving models at different capability levels. The framework and the benchmark are publicly available at https://github.com/apple/ml-mmtoolsandbox

Research on self-evolving language agents has accelerated, drawing increasing attention to their ability to create, adapt, and maintain tools from task requirements. However, existing benchmarks predominantly rely on predefined specifications, which limits scalability and hinders truly autonomous evolution. While recent studies attempt to dynamically generate tools, they primarily emphasize downstream performance, resulting in a "black-box" evaluation that makes it difficult to attribute failures to specific causes. To address this, we propose Tool-Genesis, a diagnostic benchmark designed to quantify agent capabilities across multiple dimensions, including interface compliance, functional correctness, and downstream utility. Tool-Genesis evaluates whether agents can construct task-relevant tools solely from abstract requirements (without preset specifications) and use them to solve realistic problems. Crucially, we find that even state-of-the-art models struggle to produce precise tool interfaces or executable logic in a one-shot setting. These minor initial flaws are amplified through the pipeline, leading to a sharp degradation in downstream metrics. We hope Tool-Genesis will guide future research toward training and steering models to synthesize persistent, general-purpose tools that better address real-world challenges.

Large reasoning models have demonstrated strong problem-solving abilities, yet real-world tasks often require external tools and long-horizon interactions. Existing agent frameworks typically follow predefined workflows, which limit autonomous and global task completion. In this paper, we introduce DeepAgent, an end-to-end deep reasoning agent that performs autonomous thinking, tool discovery, and action execution within a single, coherent reasoning process. To address the challenges of long-horizon interactions, particularly the context length explosion from multiple tool calls and the accumulation of interaction history, we introduce an autonomous memory folding mechanism that compresses past interactions into structured episodic, working, and tool memories, reducing error accumulation while preserving critical information. To teach general-purpose tool use efficiently and stably, we develop an end-to-end reinforcement learning strategy, namely ToolPO, that leverages LLM-simulated APIs and applies tool-call advantage attribution to assign fine-grained credit to the tool invocation tokens. Extensive experiments on eight benchmarks, including general tool-use tasks (ToolBench, API-Bank, TMDB, Spotify, ToolHop) and downstream applications (ALFWorld, WebShop, GAIA, HLE), demonstrate that DeepAgent consistently outperforms baselines across both labeled-tool and open-set tool retrieval scenarios. This work takes a step toward more general and capable agents for real-world applications. The code and demo are available at https://github.com/RUC-NLPIR/DeepAgent.

Clinical image interpretation is inherently multi-step and tool-centric: clinicians iteratively combine visual evidence with patient context, quantify findings, and refine their decisions through a sequence of specialized procedures. While LLM-based agents promise to orchestrate such heterogeneous medical tools, existing systems treat tool sets and invocation strategies as static after deployment. This design is brittle under real-world domain shifts, across tasks, and evolving diagnostic requirements, where predefined tool chains frequently degrade and demand costly manual re-design. We propose MACRO, a self-evolving, experience-augmented medical agent that shifts from static tool composition to experience-driven tool discovery. From verified execution trajectories, the agent autonomously identifies recurring effective multi-step tool sequences, synthesizes them into reusable composite tools, and registers these as new high-level primitives that continuously expand its behavioral repertoire. A lightweight image-feature memory grounds tool selection in a visual-clinical context, while a GRPO-like training loop reinforces reliable invocation of discovered composites, enabling closed-loop self-improvement with minimal supervision. Extensive experiments across diverse medical imaging datasets and tasks demonstrate that autonomous composite tool discovery consistently improves multi-step orchestration accuracy and cross-domain generalization over strong baselines and recent state-of-the-art agentic methods, bridging the gap between brittle static tool use and adaptive, context-aware clinical AI assistance. Code will be available upon acceptance.

Agentic AI architectures augment LLMs with external tools, unlocking strong capabilities but potentially incurring substantial costs. Moreover, tool use is not always beneficial: redundant or low-utility calls can even harm task performance. Effective tool use, therefore, hinges on a core LLM decision: whether to call or not call a tool when performing a task. We introduce a principled framework inspired by decision-making theory to understand tool-use decisions along three key factors: necessity, utility, and affordability. Our analysis combines two complementary lenses: a normative perspective that infers true need and utility for optimal tool calls, and a descriptive perspective that infers the model's self-perceived need and utility from their observed behaviors. We evaluate six open models and a proprietary OpenAI model across native and customized harnesses, two tools, and six tasks. Models' perceived need and utility remain misaligned with their true values, particularly under budget constraints. This misalignment produces both costly overuse and performance-degrading calls. To improve the tool decisions, we train lightweight latent estimators of need (LNEs) from model hidden states. LNEs generally predict true need more accurately than model self-reports and improve budgeted tool allocation across model scales and tool types. Code and dataset available at https://github.com/QinyuanWu0710/ToCall_or_NotToCall.

Agent skills provide reusable knowledge and instructions, yet agents must repeatedly infer how to apply them and which operation should follow. This couples task reasoning with control decisions, allowing prescribed steps to be omitted or applied incorrectly. We introduce HEXIS, which compiles agent skills into extended finite state machines that separate knowledge from control flow. Skill knowledge is incorporated into local instructions that guide reasoning and generation within states. The machine records execution progress and intermediate results, while explicit transition conditions determine subsequent operations. Our incremental compiler first maps skill clauses and tool interfaces to state operations, local instructions, data bindings, and transitions. It then aligns development traces with existing states to identify missing operations and dependencies. These are incorporated by adding or reusing states and refining their connections. Updates are accepted only after static checks and replay of the current and all previously accepted traces. Across four benchmarks and four executors, HEXIS improves success over Skill + ReAct by 16.1 percentage points on average. Qwen3.8-27B reduces execution tokens by 38.4-88.9% across benchmarks.

Tool utilization enables Large Language Model (LLM) agents to interact with the real world and resolve complex tasks. However, existing agent frameworks predominantly rely on static toolsets composed of granular atomic actions (e.g., basic file I/O or single-turn search), which forces agents to reinvent low-level logic for every recurring workflow, leading to increased reasoning overhead and failure rates. In this study, we propose that agents can achieve self-evolution by synthesizing these atomic actions into reusable Standard Operating Procedures (SOPs), which function as callable higher-order tools that encapsulate multi-step logic. We further introduce EvoSOP, a framework that empowers agents to extract SOPs from execution trajectories and iteratively optimize the toolset through a systematic lifecycle of construction, merging, evaluation, and pruning. Extensive experiments demonstrate that EvoSOP significantly boosts task success rates while substantially reducing the number of interaction rounds compared to baselines. Our analysis also reveals that iterative tool optimization fosters reliable and efficient tool-use patterns, providing a scalable pathway for the development of self-evolving agents.

This paper presents a new tool learning dataset Seal-Tools, which contains self-instruct API-like tools. Seal-Tools not only offers a large number of tools, but also includes instances which demonstrate the practical application of tools. Seeking to generate data on a large scale while ensuring reliability, we propose a self-instruct method to generate tools and instances, allowing precise control over the process. Moreover, our Seal-Tools contains hard instances that call multiple tools to complete the job, among which some are nested tool callings. For precise and comprehensive evaluation, we use strict format control and design three metrics from different dimensions. Therefore, Seal-Tools can serve as a new benchmark to evaluate the tool-calling ability of LLMs. Finally, we evaluate several prevalent LLMs and our finetuned model on Seal-Tools. The results show that current systems are far from perfect. The code, data and experiment results are available at https://github.com/fairyshine/Seal-Tools .

Tool-using language model agents are usually evaluated by whether they finish the user's task. That metric misses a common failure: an agent can complete the requested work while also taking an unauthorized side-effecting action, such as writing to the wrong object, expanding the scope of the request, or contacting an unintended recipient. We call this failure mode collateral damage (CD). We introduce SABench (Side-effect-Aware Benchmark), a benchmark of 201 email, calendar, and ticket tasks. Each task crosses one of four state structures (independent, dependent, externally reachable, cross-tool) with one of four trap families (ambiguity, mis-targeting, cascade harm, overreach), and each task has a deterministic trace-based oracle for both goal satisfaction and authorization compliance. Across 2,211 model-task pairs from 11 frontier LLMs spanning major commercial and open model families, 15.2% of all runs incur CD, with risk concentrated in ambiguity tasks (38.8% violation rate) while non-ambiguous traps average 8.4% CD. Among goal-satisfied runs, 12.8% still produce unauthorized writes. Cross-tool and dependent states have about twice the CD rate of independent states. CD rates vary by 4.7x across models at comparable goal rates, which suggests that task success alone is a poor proxy for safe tool use. The SABench task corpus is released at https://huggingface.co/datasets/Phaedrus/sabench; the traces, oracle, code, and analysis pipeline are released at https://github.com/hjj194/sabench-artifact.

Tool agents--LLM-based systems that interact with external APIs--offer a way to execute real-world tasks. However, as tasks become increasingly complex, these agents struggle to identify and call the correct APIs in the proper order. To tackle this problem, we investigate converting API documentation into a structured API graph that captures API dependencies and leveraging it for multi-tool queries that require compositional API calls. To support this, we introduce In-N-Out, the first expert-annotated dataset of API graphs built from two real-world API benchmarks and their documentation. Using In-N-Out significantly improves performance on both tool retrieval and multi-tool query generation, nearly doubling that of LLMs using documentation alone. Moreover, graphs generated by models fine-tuned on In-N-Out close 90% of this gap, showing that our dataset helps models learn to comprehend API documentation and parameter relationships. Our findings highlight the promise of using explicit API graphs for tool agents and the utility of In-N-Out as a valuable resource. We release our dataset and code at https://github.com/holi-lab/In-N-Out-API-Graph.

Policy-adherent tool-calling agents in customer-service domains must maintain task states across turns while calling tools and obeying domain policies. Task states consist of relevant facts, identifiers, constraints, and conditions observed through user interaction and tool calls. In standard agents, task states are not represented separately. Observations, tool returns, and policy instructions are placed in the prompt, leaving agents to reconstruct the relevant states from the prompt each time they decide what to do next. This design makes state management implicit, creating two common failure modes. An agent may retrieve the right facts but later ground its decision in stale, missing, or incorrect information; and a syntactically valid tool call may still violate a domain policy that depends on the current task state. We introduce LedgerAgent, an inference-time method for tool-calling agents that maintains observed task states in a separate ledger and renders the states into the prompt. The ledger is also used to check state-dependent policy constraints before environment-changing tool calls are executed, blocking policy violations. Across four customer-service domains and a mixed panel of open- and closed-weight models, LedgerAgent improves average passk over a standard prompt-based tool-calling approach, with the largest gains under stricter multi-trial consistency metrics.

While LLM-based agents can interact with environments via invoking external tools, their expanded capabilities also amplify security risks. Monitoring step-level tool invocation behaviors in real time and proactively intervening before unsafe execution is critical for agent deployment, yet remains under-explored. In this work, we first construct TS-Bench, a novel benchmark for step-level tool invocation safety detection in LLM agents. We then develop a guardrail model, TS-Guard, using multi-task reinforcement learning. The model proactively detects unsafe tool invocation actions before execution by reasoning over the interaction history. It assesses request harmfulness and action-attack correlations, producing interpretable and generalizable safety judgments and feedback. Furthermore, we introduce TS-Flow, a guardrail-feedback-driven reasoning framework for LLM agents, which reduces harmful tool invocations of ReAct-style agents by 65 percent on average and improves benign task completion by approximately 10 percent under prompt injection attacks.

We present Qwen-Audio-Agent, a harness that combines full-duplex voice interaction with asynchronous task execution through a foreground-background architecture. A Frontend Agent manages dialogue and selects between direct tool use and delegation, while a Backend Agent carries out delegated tasks in a separate context. An Orchestration Runtime maintains task state, coordinates requests for user input and authorization, and schedules the return of results to the conversation. The runtime separates speech interruption from task cancellation and execution completion from result delivery, allowing conversation to continue while delegated work proceeds. Environmental events and persistent memory provide context within and across sessions. Independent adapters support integration with different frontend models, backend agents, and clients. We instantiate the architecture in desktop assistance, intelligent cockpits, and voice customer service. On an in-house cockpit benchmark of 134 cases, mixed execution achieves a task success rate of 91.04%, compared with 72.39% and 80.60% for the direct and all delegated configurations, respectively. In a separate latency evaluation on matched successful turns, mixed execution reduces mean task execution latency by 26.73% and 30.91% relative to these baselines, respectively. These results support the complementary use of direct tool calls for immediate operations and backend delegation for multi-step tasks.

Tool-using agents often incur substantial computational cost due to long reasoning chains and iterative tool usage. In practical scenarios, many tasks become infeasible under constrained tool environments, where the capabilities required for successful task completion are unavailable. Detecting infeasible tasks and stopping execution early can significantly reduce unnecessary execution cost. In this work, we propose FeasiGen, an automatic pipeline for constructing infeasible agent tasks by identifying the critical tools required for successful task completion. Our approach extracts tool-calling traces from successful executions across multiple agent systems, identifies critical tools consistently shared across diverse execution strategies, and masks these tools to automatically transform solvable tasks into infeasible ones. Human verification confirms that the infeasibility annotations for our constructed tasks achieve over 94% accuracy. We further introduce feasibility-aware evaluation metrics for measuring whether agents can recognize infeasible tasks and stop execution appropriately. Extensive evaluations across nine models reveal substantially weak infeasibility detection ability, with false continue rate reaching up to 73.9%. We further observe that multi-agent architectures significantly reduce erroneous execution under infeasible conditions.

Although Foundation Models (FMs), such as GPT-4, are increasingly used in domains like finance and software engineering, reliance on textual interfaces limits these models' real-world interaction. To address this, FM providers introduced tool calling-triggering a proliferation of frameworks with distinct tool interfaces. In late 2024, Anthropic introduced the Model Context Protocol (MCP) to standardize this tool ecosystem, which has become the de facto standard with over eight million weekly SDK downloads. Despite its adoption, MCP's AI-driven, non-deterministic control flow introduces new risks to sustainability, security, and maintainability, warranting closer examination. Towards this end, we present the first large-scale empirical study of MCP servers. Using state-of-the-art health metrics and a hybrid analysis pipeline, combining a general-purpose static analysis tool with an MCP-specific scanner, we evaluate 1,899 open-source MCP servers to assess their health, security, and maintainability. Despite MCP servers demonstrating strong health metrics, we identify eight distinct vulnerabilities - only three overlapping with traditional software vulnerabilities. Additionally, 7.2% of servers contain general vulnerabilities and 5.5% exhibit MCP-specific tool poisoning. Regarding maintainability, while 66% exhibit code smells, 14.4% contain nine bug patterns overlapping with traditional open-source software projects. These findings highlight the need for MCP-specific vulnerability detection techniques while reaffirming the value of traditional analysis and refactoring practices.

AI Agents can perform complex operations at great speed, but just like all the humans we have ever hired, their intelligence remains fallible. Miscommunications aren't noticed, systemic biases have no counter-action, and inner monologues are rarely written down. We did not come to fire them for their mistakes, but to hire them and provide a safe productive working environment. We posit that we can reuse a common corporate organizational structure: teams of independent AI agents with strict role boundaries can work with common goals, but opposing incentives. Multiple models serving as a team of rivals can catch and minimize errors within the final product at a small cost to the velocity of actions. In this paper we demonstrate that we can achieve reliability without acquiring perfect components, but through careful orchestration of imperfect ones. This paper describes the architecture of such a system in practice: specialized agent teams (planners, executors, critics, experts), organized into an organization with clear goals, coordinated through a remote code executor that keeps data transformations and tool invocations separate from reasoning models. Rather than agents directly calling tools and ingesting full responses, they write code that executes remotely; only relevant summaries return to agent context. By preventing raw data and tool outputs from contaminating context windows, the system maintains clean separation between perception (brains that plan and reason) and execution (hands that perform heavy data transformations and API calls). We demonstrate the approach achieves over 90% internal error interception prior to user exposure while maintaining acceptable latency tradeoffs. A survey from our traces shows that we only trade off cost and latency to achieve correctness and incrementally expand capabilities without impacting existing ones.