Daily Papers

A dark-matter core and a soft nuclear equation of state can produce similar mass--radius signatures, motivating a complementary probe through the f-mode spectrum. We compute quadrupolar f-mode frequencies and gravitational-wave damping times in full general relativity for cold, nonrotating neutron stars admixed with self-interacting bosonic dark matter (DM). Our two-fluid survey spans 21 nuclear equations of state covering nucleonic, hyperonic, Δ-admixed, and combined hyperon--Δ compositions at F_{rm DM}=1--20%. The main sequences use λ=π and boson masses of 500 and 100,MeV for the core and halo studies, respectively. Independent normal-matter (NM) and DM displacements couple through the metric, yielding NM-led and DM-led f-mode branches whose radiative damping is determined by outgoing-wave boundary conditions. At 1.4,M_odot, the core DM-led damping time decreases from order 10^3,s at F_{rm DM}=1% to order 1,s at 20%, approximately following an empirical F_{rm DM}^{-2} dependence, while NM-led damping times remain within 0.12--0.33,s. Halo DM-led damping instead increases with dark fraction: at the same stellar mass and F_{rm DM}=20%, dark radii approach 88,km, frequencies fall to 0.14,kHz, and damping times reach approximately 450,s. Selected high-mass core sequences exhibit strong DM-led damping-time upturns not reproduced by the leading mass-quadrupole diagnostic. Representative core calculations show greater DM-led sensitivity to the bosonic self-coupling and retain both branches at ell=3. Under the adopted nonrotating, circular-binary prescriptions, no evaluated configuration satisfies all geometric and perturbative conditions for a controlled linear tidal resonance.

Comprehensive study using DC transport, specific heat, magnetization, and two-coil mutual inductance measurements unveils an understanding of three temperature regimes in SmB_6: (i) T geq T^{*} (sim66K), (ii) T_g (sim40 K) leq T < T^{*}, and (iii) T < T_g. Onset of Kondo breakdown below T^{*} releases disorder-driven magnetic fluctuations, which splits the bulk (sim116K) and surface Kondo temperature (T_k^{s} approx 7 K). Below T_g, as magnetic fluctuations subside, surface Kondo screening revives, stabilizing the topological surface state and generating an in-gap feature (sim2.2 meV) across which Dirac-like carriers are excited. Nyquist impedance analysis reveals a crossover from purely capacitive to capacitive-inductive behavior, signalling a disorder-driven two-fluid phase of heavy quasiparticles and light, high-mobility carriers below T_g. We identify a characteristic length scale, L_{ν_0}(T), associated with the high-mobility phase, exhibiting an almost divergent trend below T_k^{s}. These findings underscore the complex nature of the surface conducting state in SmB_6.

The acceleration of the young solar wind is studied using the first 17 encounters of Parker Solar Probe. We identify wind intervals from different source regions: coronal hole (CH) interiors, streamers, and low Mach number boundary layers (LMBLs), i.e. the inner boundaries of coronal holes. We present their statistical trends in the acceleration process. Most of the observations can be reproduced by a two-fluid hydrodynamic model with realistic corona temperatures. In such a model, the solar wind is accelerated by the combined thermal pressures of protons and electrons,but it is mainly the difference in the proton pressure that leads to the difference in the solar wind speed. The proton pressure is the highest in the fastest CH wind, with a high initial proton temperature that decreases slowly. It is lower in the relatively slow LMBL wind, and the lowest in the slowest streamer wind. The proton temperature is quadratically correlated with the wind speed when scaled to the same distance. In contrast, the electron temperature shows no significant differences for different wind types or wind speeds, indicating more similar contributions from the electron pressure. The model gives reasonable locations for the sonic critical point, which is on average at 3.6-7.3 solar radii and can also extend to large distances when the proton temperature is extremely low, as in the LMBL wind. In addition to the thermal pressure, we raise the possibility that Alfvén waves may contribute to the solar wind acceleration, especially for the fast CH wind.

We introduce BCAT, a PDE foundation model designed for autoregressive prediction of solutions to two dimensional fluid dynamics problems. Our approach uses a block causal transformer architecture to model next frame predictions, leveraging previous frames as contextual priors rather than relying solely on sub-frames or pixel-based inputs commonly used in image generation methods. This block causal framework more effectively captures the spatial dependencies inherent in nonlinear spatiotemporal dynamics and physical phenomena. In an ablation study, next frame prediction demonstrated a 3.5x accuracy improvement over next token prediction. BCAT is trained on a diverse range of fluid dynamics datasets, including incompressible and compressible Navier-Stokes equations across various geometries and parameter regimes, as well as the shallow-water equations. The model's performance was evaluated on 6 distinct downstream prediction tasks and tested on about 8K trajectories to measure robustness on a variety of fluid dynamics simulations. BCAT achieved an average relative error of 1.18% across all evaluation tasks, outperforming prior approaches on standard benchmarks. With fine-tuning on a turbulence dataset, we show that the method adapts to new settings with more than 40% better accuracy over prior methods.

Data-driven, deep-learning modeling frameworks have been recently developed for forecasting time series data. Such machine learning models may be useful in multiple domains including the atmospheric and oceanic ones, and in general, the larger fluids community. The present work investigates the possible effectiveness of such deep neural operator models for reproducing and predicting classic fluid flows and simulations of realistic ocean dynamics. We first briefly evaluate the capabilities of such deep neural operator models when trained on a simulated two-dimensional fluid flow past a cylinder. We then investigate their application to forecasting ocean surface circulation in the Middle Atlantic Bight and Massachusetts Bay, learning from high-resolution data-assimilative simulations employed for real sea experiments. We confirm that trained deep neural operator models are capable of predicting idealized periodic eddy shedding. For realistic ocean surface flows and our preliminary study, they can predict several of the features and show some skill, providing potential for future research and applications.

We show that Hertzian particle contacts are the underlying cause of the as-yet-unexplained noninteger power laws in weakly nonlinear rheology. In the medium amplitude oscillatory shear (MAOS) region, the cubic scaling of the leading order nonlinear shear stress (σ_3 sim γ_0^{m_3}, m_3=3) is the standard expectation. Expanding on the work by Natalia et al. [J. Rheol. 64 625-635 (2020)], we report an extensive data set of noncubical, noninteger power law scalings m_3 for particle suspensions in two immiscible fluids with a capillary attractive interaction, known as capillary suspensions. Here, we show that distinct power law exponents are found for the storage and loss moduli and these noninteger scalings occur at every secondary fluid concentration for two different contact angles. These compelling results indicate that the noninteger scalings are related to the underlying microstructure of capillary suspensions. We show that the magnitude of the third harmonic elastic stress scaling m_3,elastic originates from Hertzian-like contacts in combination with the attractive capillary force. The related third harmonic viscous stress scaling m_3,viscous is, found to be associated with adhesive-controlled friction. These observations, conducted for a wide range of compositions, can help explain previous reports of noninteger scaling for materials involving particle contacts and offers a new opportunity using the variable power law exponent of MAOS rheology to reveal the physics of particle bonds and friction in the rheological response under low deformation instead of at very high shear rates.

Language model (LM) benchmarking faces several challenges: comprehensive evaluations are costly, benchmarks often fail to measure the intended capabilities, and evaluation quality can degrade due to labeling errors and benchmark saturation. Although various strategies have been proposed to mitigate these issues, they tend to address individual aspects in isolation, neglecting broader questions about overall evaluation quality. Here, we introduce Fluid Benchmarking, a new evaluation approach that advances LM benchmarking across multiple dimensions. Inspired by psychometrics, Fluid Benchmarking is based on the insight that the relative value of benchmark items depends on an LM's capability level, suggesting that evaluation should adapt to each LM. Methodologically, Fluid Benchmarking estimates an item response model based on existing LM evaluation results and uses the inferred quantities to select evaluation items dynamically, similar to computerized adaptive testing in education. In our experiments, we compare Fluid Benchmarking against the common practice of random item sampling as well as more sophisticated baselines, including alternative methods grounded in item response theory. We examine four dimensions -- efficiency, validity, variance, and saturation -- and find that Fluid Benchmarking achieves superior performance in all of them (e.g., higher validity and less variance on MMLU with fifty times fewer items). Our analysis shows that the two components of Fluid Benchmarking have distinct effects: item response theory, used to map performance into a latent ability space, increases validity, while dynamic item selection reduces variance. Overall, our results suggest that LM benchmarking can be substantially improved by moving beyond static evaluation.

Most artificial life simulators either operate on abstract substrates disconnected from physical reality, or simulate physically grounded worlds that do not scale to the population sizes required for open-ended evolution. We present Microcosmos, a simulation engine in which artificial lifeforms are modeled as elastic filament chains inhabiting a two-dimensional viscous fluid world, designed from the ground up for modern GPU hardware and end-to-end differentiable simulation. We validate the engine through four experiments. Hand-designed locomotion strategies confirm that the fluid coupling respects known physical constraints. Gradient-based optimization of filament folding demonstrates both the full differentiability of the simulator and the expressivity of the filament encodings. Neuroevolution and quality-diversity search produce a wide range of swimming and chemotaxis behaviors automatically. Linear scaling with particle count confirms the engine supports large-scale simulation. Microcosmos is released as an open platform with the long-term goal of supporting large-scale open-ended evolutionary simulations, designed to be physically plausible and computationally scalable.

The gradual insertion method for direct calculation of the chemical potential by molecular simulation is applied in the NpT ensemble to different quadrupolar two-centre Lennard-Jones fluids at high density state points. The results agree well with Widom's test particle insertion but show at very high densities significantly smaller statistical uncertainties. The gradual insertion method, which is coupled here with preferential sampling, extends the density range where reliable information on the chemical potential can be obtained. Application details are reported.

We study reconstructing and predicting 3D fluid appearance and velocity from a single video. Current methods require multi-view videos for fluid reconstruction. We present FluidNexus, a novel framework that bridges video generation and physics simulation to tackle this task. Our key insight is to synthesize multiple novel-view videos as references for reconstruction. FluidNexus consists of two key components: (1) a novel-view video synthesizer that combines frame-wise view synthesis with video diffusion refinement for generating realistic videos, and (2) a physics-integrated particle representation coupling differentiable simulation and rendering to simultaneously facilitate 3D fluid reconstruction and prediction. To evaluate our approach, we collect two new real-world fluid datasets featuring textured backgrounds and object interactions. Our method enables dynamic novel view synthesis, future prediction, and interaction simulation from a single fluid video. Project website: https://yuegao.me/FluidNexus.

We consider the problem of modeling high-speed flows using machine learning methods. While most prior studies focus on low-speed fluid flows in which uniform time-stepping is practical, flows approaching and exceeding the speed of sound exhibit sudden changes such as shock waves. In such cases, it is essential to use adaptive time-stepping methods to allow a temporal resolution sufficient to resolve these phenomena while simultaneously balancing computational costs. Here, we propose a two-phase machine learning method, known as ShockCast, to model high-speed flows with adaptive time-stepping. In the first phase, we propose to employ a machine learning model to predict the timestep size. In the second phase, the predicted timestep is used as an input along with the current fluid fields to advance the system state by the predicted timestep. We explore several physically-motivated components for timestep prediction and introduce timestep conditioning strategies inspired by neural ODE and Mixture of Experts. As ShockCast is the first framework for learning high-speed flows, we evaluate our methods by generating two supersonic flow datasets, available at https://huggingface.co/datasets/divelab. Our code is publicly available as part of the AIRS library (https://github.com/divelab/AIRS).

In this work, we tackle the problem of real-world fluid animation from a still image. The key of our system is a surface-based layered representation deriving from video decomposition, where the scene is decoupled into a surface fluid layer and an impervious background layer with corresponding transparencies to characterize the composition of the two layers. The animated video can be produced by warping only the surface fluid layer according to the estimation of fluid motions and recombining it with the background. In addition, we introduce surface-only fluid simulation, a 2.5D fluid calculation version, as a replacement for motion estimation. Specifically, we leverage the triangular mesh based on a monocular depth estimator to represent the fluid surface layer and simulate the motion in the physics-based framework with the inspiration of the classic theory of the hybrid Lagrangian-Eulerian method, along with a learnable network so as to adapt to complex real-world image textures. We demonstrate the effectiveness of the proposed system through comparison with existing methods in both standard objective metrics and subjective ranking scores. Extensive experiments not only indicate our method's competitive performance for common fluid scenes but also better robustness and reasonability under complex transparent fluid scenarios. Moreover, as the proposed surface-based layer representation and surface-only fluid simulation naturally disentangle the scene, interactive editing such as adding objects to the river and texture replacing could be easily achieved with realistic results.

We demonstrate several techniques to encourage practical uses of neural networks for fluid flow estimation. In the present paper, three perspectives which are remaining challenges for applications of machine learning to fluid dynamics are considered: 1. interpretability of machine-learned results, 2. bulking out of training data, and 3. generalizability of neural networks. For the interpretability, we first demonstrate two methods to observe the internal procedure of neural networks, i.e., visualization of hidden layers and application of gradient-weighted class activation mapping (Grad-CAM), applied to canonical fluid flow estimation problems -- (1) drag coefficient estimation of a cylinder wake and (2) velocity estimation from particle images. It is exemplified that both approaches can successfully tell us evidences of the great capability of machine learning-based estimations. We then utilize some techniques to bulk out training data for super-resolution analysis and temporal prediction for cylinder wake and NOAA sea surface temperature data to demonstrate that sufficient training of neural networks with limited amount of training data can be achieved for fluid flow problems. The generalizability of machine learning model is also discussed by accounting for the perspectives of inter/extrapolation of training data, considering super-resolution of wakes behind two parallel cylinders. We find that various flow patterns generated by complex interaction between two cylinders can be reconstructed well, even for the test configurations regarding the distance factor. The present paper can be a significant step toward practical uses of neural networks for both laminar and turbulent flow problems.

Physics-informed surrogate models can accelerate computational fluid dynamics simulations. However, many existing methods reproduce global flow patterns more reliably than localized multiscale structures. This study presents a physics-informed Fourier-wavelet transformer for next-step velocity-field reconstruction in real-world flow benchmarks. The proposed formulation combines hybrid Fourier-wavelet spectral encoding with physics-biased self-attention based on partial differential equation residual diagnostics. It also uses self-supervised pretraining through Masked Physics Prediction and Equation Consistency Prediction. The experiments are conducted on two real benchmark cases: cylinder-wake flow and fluid-structure interaction. All approaches are evaluated under a shared local protocol and compared with spectral, transformer-based, operator-learning, and physics-informed neural-network baselines. On the cylinder-wake benchmark, the proposed model achieves the best aggregate accuracy, with an all-channel normalized mean-squared error of 0.05875 and an all-channel Pearson correlation coefficient of 0.97019. On the fluid-structure-interaction benchmark, it gives the lowest all-channel normalized mean-squared error of 2.70 times 10^{-4}, compared with 4.02 times 10^{-4} for the strongest baseline. Component-wise field comparisons and scale-separated diagnostics further show stronger recovery of localized wake structures, including near-body, wake-core, and far-wake features. The results demonstrate improved real-world flow reconstruction while maintaining a practical accuracy-cost tradeoff.

Rayleigh-B\'enard convection (RBC) is a recurrent phenomenon in several industrial and geoscience flows and a well-studied system from a fundamental fluid-mechanics viewpoint. However, controlling RBC, for example by modulating the spatial distribution of the bottom-plate heating in the canonical RBC configuration, remains a challenging topic for classical control-theory methods. In the present work, we apply deep reinforcement learning (DRL) for controlling RBC. We show that effective RBC control can be obtained by leveraging invariant multi-agent reinforcement learning (MARL), which takes advantage of the locality and translational invariance inherent to RBC flows inside wide channels. The MARL framework applied to RBC allows for an increase in the number of control segments without encountering the curse of dimensionality that would result from a naive increase in the DRL action-size dimension. This is made possible by the MARL ability for re-using the knowledge generated in different parts of the RBC domain. We show in a case study that MARL DRL is able to discover an advanced control strategy that destabilizes the spontaneous RBC double-cell pattern, changes the topology of RBC by coalescing adjacent convection cells, and actively controls the resulting coalesced cell to bring it to a new stable configuration. This modified flow configuration results in reduced convective heat transfer, which is beneficial in several industrial processes. Therefore, our work both shows the potential of MARL DRL for controlling large RBC systems, as well as demonstrates the possibility for DRL to discover strategies that move the RBC configuration between different topological configurations, yielding desirable heat-transfer characteristics. These results are useful for both gaining further understanding of the intrinsic properties of RBC, as well as for developing industrial applications.

Scaling up autoregressive models in vision has not proven as beneficial as in large language models. In this work, we investigate this scaling problem in the context of text-to-image generation, focusing on two critical factors: whether models use discrete or continuous tokens, and whether tokens are generated in a random or fixed raster order using BERT- or GPT-like transformer architectures. Our empirical results show that, while all models scale effectively in terms of validation loss, their evaluation performance -- measured by FID, GenEval score, and visual quality -- follows different trends. Models based on continuous tokens achieve significantly better visual quality than those using discrete tokens. Furthermore, the generation order and attention mechanisms significantly affect the GenEval score: random-order models achieve notably better GenEval scores compared to raster-order models. Inspired by these findings, we train Fluid, a random-order autoregressive model on continuous tokens. Fluid 10.5B model achieves a new state-of-the-art zero-shot FID of 6.16 on MS-COCO 30K, and 0.69 overall score on the GenEval benchmark. We hope our findings and results will encourage future efforts to further bridge the scaling gap between vision and language models.

A hybrid kinetic-fluid model is used to study ionization waves (striations) in a low-current plasma column of DC discharges in noble gases. Coupled solutions of a kinetic equation for electrons, a drift-diffusion equation of ions, and a Poisson equation for the electric field are obtained to clarify the nature of plasma stratification in the positive column and near-electrode effects. A simplified two-level excitation-ionization model is used for the conditions when the nonlinear effects due to stepwise ionization, gas heating, and Coulomb interactions among electrons are negligible. It is confirmed that the nonlocal effects are responsible for the formation of moving striations in DC discharges at low plasma densities. The calculated properties of self-excited waves of S, P, and R types in Neon and S type in Argon agree with available experimental data. The reason for Helium plasma stability to stratification is clarified. It is shown that sustaining stratified plasma is more efficient than striation-free plasma when the ionization rate is a nonlinear function of the electric field. However, the nonlinear dependence of the ionization rate on the electric field is not required for plasma stratification. Striations of S, P, and R types in Neon exist with minimal or no ionization enhancement. Effects of the column length on the wave properties have been demonstrated in our simulations.

Surrogate models are necessary to optimize meaningful quantities in physical dynamics as their recursive numerical resolutions are often prohibitively expensive. It is mainly the case for fluid dynamics and the resolution of Navier-Stokes equations. However, despite the fast-growing field of data-driven models for physical systems, reference datasets representing real-world phenomena are lacking. In this work, we develop AirfRANS, a dataset for studying the two-dimensional incompressible steady-state Reynolds-Averaged Navier-Stokes equations over airfoils at a subsonic regime and for different angles of attacks. We also introduce metrics on the stress forces at the surface of geometries and visualization of boundary layers to assess the capabilities of models to accurately predict the meaningful information of the problem. Finally, we propose deep learning baselines on four machine learning tasks to study AirfRANS under different constraints for generalization considerations: big and scarce data regime, Reynolds number, and angle of attack extrapolation.

Quasicrystals exhibit exotic properties inherited from the self-similarity of their long-range ordered, yet aperiodic, structure. The recent realization of optical quasicrystal lattices paves the way to the study of correlated Bose fluids in such structures, but the regime of strong interactions remains largely unexplored, both theoretically and experimentally. Here, we determine the quantum phase diagram of two-dimensional correlated bosons in an eightfold quasicrystal potential. Using large-scale quantum Monte Carlo calculations, we demonstrate a superfluid-to-Bose glass transition and determine the critical line. Moreover, we show that strong interactions stabilize Mott insulator phases, some of which have spontaneously broken eightfold symmetry. Our results are directly relevant to current generation experiments and, in particular, drive prospects to the observation of the still elusive Bose glass phase in two dimensions and exotic Mott phases.

Recent LLM-based agents have closed substantial portions of the scientific discovery loop in software-only machine-learning research, in chemistry, and in biology. Extending the same loop to high-fidelity physical simulators is harder, because solver completion does not imply physical validity and many failure modes appear only in field-level imagery rather than in solver logs. We present AI CFD Scientist, an open-source AI scientist for computational fluid dynamics (CFD) that, to our knowledge, is the first to span literature-grounded ideation, validated execution, vision-based physics verification, source-code modification, and figure-grounded writing within a single inspectable workflow. Three coupled pathways cover parameter sweeps within a fixed solver, case-local C++ library compilation for new physical models, and open-ended hypothesis search against a reference comparator, all running on OpenFOAM through Foam-Agent. At the center of the framework is a vision-language physics-verification gate that inspects rendered flow fields before any result is accepted, rerun, or written into a manuscript. On five tasks under a shared GPT-5.5 backbone, AI CFD Scientist autonomously discovers a Spalart-Allmaras runtime correction that reduces lower-wall Cf RMSE against DNS by 7.89% on the periodic hill at Reh=5600; under matched LLM cost, two strong general AI-scientist baselines (ARIS, DeepScientist) execute partial CFD workflows but lack the domain-specific validity gates needed to convert runs into defensible scientific claims; and a controlled planted-failure ablation shows that the vision-language gate detects 14 of 16 silent failures missed by solver-level checks. Code, prompts, and run artifacts are released at https://github.com/csml-rpi/cfd-scientist.

In turbulent flows, energy flux refers to the transfer of kinetic energy across different scales of motion, a concept that is a cornerstone of turbulence theory. The direction of net energy flux is prescribed by the dimensionality of the fluid system.

We investigate the coupling effects of the two-phase interface, viscosity ratio, and density ratio of the dispersed phase to the continuous phase on the flow statistics in two-phase Taylor-Couette turbulence at a system Reynolds number of 6000 and a system Weber number of 10 using interface-resolved three-dimensional direct numerical simulations with the volume-of-fluid method. Our study focuses on four different scenarios: neutral droplets, low-viscosity droplets, light droplets, and low-viscosity light droplets. We find that neutral droplets and low-viscosity droplets primarily contribute to drag enhancement through the two-phase interface, while light droplets reduce the system's drag by explicitly reducing Reynolds stress due to the density dependence of Reynolds stress. Additionally, low-viscosity light droplets contribute to greater drag reduction by further reducing momentum transport near the inner cylinder and implicitly reducing Reynolds stress. While interfacial tension enhances turbulent kinetic energy (TKE) transport, drag enhancement is not strongly correlated with TKE transport for both neutral droplets and low-viscosity droplets. Light droplets primarily reduce the production term by diminishing Reynolds stress, whereas the density contrast between the phases boosts TKE transport near the inner wall. Therefore, the reduction in the dissipation rate is predominantly attributed to decreased turbulence production, causing drag reduction. For low-viscosity light droplets, the production term diminishes further, primarily due to their greater reduction in Reynolds stress, while reduced viscosity weakens the density difference's contribution to TKE transport near the inner cylinder, resulting in a more pronounced reduction in the dissipation rate and consequently stronger drag reduction. Our findings provide new insights into the turbulence modulation in two-phase flow.

We propose PROSE-FD, a zero-shot multimodal PDE foundational model for simultaneous prediction of heterogeneous two-dimensional physical systems related to distinct fluid dynamics settings. These systems include shallow water equations and the Navier-Stokes equations with incompressible and compressible flow, regular and complex geometries, and different buoyancy settings. This work presents a new transformer-based multi-operator learning approach that fuses symbolic information to perform operator-based data prediction, i.e. non-autoregressive. By incorporating multiple modalities in the inputs, the PDE foundation model builds in a pathway for including mathematical descriptions of the physical behavior. We pre-train our foundation model on 6 parametric families of equations collected from 13 datasets, including over 60K trajectories. Our model outperforms popular operator learning, computer vision, and multi-physics models, in benchmark forward prediction tasks. We test our architecture choices with ablation studies.

We investigate turbulent dynamics from large to sub-proton scales, the kinetic wave activity and resulting proton heating in three-dimensional hybrid-kinetic simulations of freely decaying balanced and imbalanced Alfvénic turbulence. We considered initial fluctuations with same amplitude and spectral shape but different degrees of correlation between velocity and magnetic field perturbations (i.e., normalized cross-helicity), which define the corresponding turbulent regimes. We found that our balanced turbulence simulation exhibits stronger energy dissipation and more efficient proton heating compared to the imbalanced case. On the large fluid scales, the two simulations undergo distinct nonlinear dynamic and energy cascades, leading to different spectral properties once turbulence is well developed. At sub-proton scales, fluctuations are predominantly oblique with right-hand polarization, a property common to both regimes. In contrast, only the imbalanced simulation displays substantial wave power parallel to the guide magnetic field, with clear signatures of ion-cyclotron waves. These waves are excited in regions with strong temperature anisotropy that arise during the initial nonlinear steepening of Alfvénic fluctuations, a process that simultaneously generates parallel-propagating proton beams. Furthermore, non-Maxwellian features emerge in velocity space, indicating different heating mechanisms in balanced and imbalanced regimes and providing evidence for the role of kinetic instabilities in regulating the turbulent dynamics. Overall, these results show that cross-helicity is a key parameter controlling the large-scale evolution, kinetic activity, and energy dissipation in collisionless turbulent plasmas.

We continue study of equilibrium of two species of 2d coulomb charges (or point vortices in 2d ideal fluid) started in Lv. Although for two species of vortices with circulation ratio -1 the relationship between the equilibria and the factorization/Darboux transformation of the Schrodinger operator was established a long ago, the question about similar relationship for the ratio -2 remained unanswered. Here we present the answer.

Video identity customization seeks to synthesize realistic, temporally coherent videos of a specific subject, given a single reference image and a text prompt. This task presents two core challenges: (1) maintaining identity consistency while aligning with the described appearance and actions, and (2) generating natural, fluid motion without unrealistic stiffness. To address these challenges, we introduce Proteus-ID, a novel diffusion-based framework for identity-consistent and motion-coherent video customization. First, we propose a Multimodal Identity Fusion (MIF) module that unifies visual and textual cues into a joint identity representation using a Q-Former, providing coherent guidance to the diffusion model and eliminating modality imbalance. Second, we present a Time-Aware Identity Injection (TAII) mechanism that dynamically modulates identity conditioning across denoising steps, improving fine-detail reconstruction. Third, we propose Adaptive Motion Learning (AML), a self-supervised strategy that reweights the training loss based on optical-flow-derived motion heatmaps, enhancing motion realism without requiring additional inputs. To support this task, we construct Proteus-Bench, a high-quality dataset comprising 200K curated clips for training and 150 individuals from diverse professions and ethnicities for evaluation. Extensive experiments demonstrate that Proteus-ID outperforms prior methods in identity preservation, text alignment, and motion quality, establishing a new benchmark for video identity customization. Codes and data are publicly available at https://grenoble-zhang.github.io/Proteus-ID/.

We investigate solutions to a coupled system of partial differential equations that describe a multilayered filtration system. Namely, we study the interaction of a viscous incompressible flow with bulk poroelasticity, via a poroelastic interface. The configuration consists of two 3D toroidal subdomains connected via a plate interface, which permits elastic deformation and perfusive fluid dynamics. The governing dynamics comprise Stokes equations in the bulk fluid region, Biot's equations in the bulk poroelastic region, and the recent poroplate of Mikelić at the interface. Coupling occurs on the top and lower surfaces of the plate, and involves conservation of mass, stress balance, and a certain slip condition for the fluid free-flow. We seek strong (and mild) solutions in the Hilbert space framework via the Lumer-Phillips theorem. The resolvent analysis employs a nonstandard mixed variational formulation which captures the complex, multi-physics coupling at the interface. We explicitly characterize the infinitesimal generator associated to the linear Cauchy problem and establish the generation of a C_0-semigroup on a suitably chosen finite-energy space. With the semigroup in hand, we may treat elastic nonlinearities for plate displacements through perturbation theory. These result parallel those for Biot-Stokes filtration systems, and complement the recently established weak solution theory for multilayer filtrations. The agency of the semigroup straightforwardly admits structural (plate) nonlinearity into the dynamics. Future stability and regularity analyses for multilayer filtrations are also made possible by these results, as well as a comparison of spectral and regularity properties between filtration configurations, and the elucidation of the mitigating poroplate dynamics as possibly regularizing and stabilizing.

One of the central challenges in modern cosmology is understanding the nature of dark energy and its evolution throughout the history of the Universe. Dark energy is commonly modeled as a perfect fluid with a time-varying equation-of-state parameter, w(z), often modeled under CPL parametrization using two parameters w_0 and w_a. In this study, we explore both parametric and non-parametric methods to reconstruct the dark energy Equation of State (EoS) using Gravitational Wave (GW) sources, with and without electromagnetic (EM) counterparts called as bright sirens and dark sirens respectively. In the parametric approach, we extend the widely used w_0-w_a model by introducing an additional term, w_b, to better capture the evolving dynamics of dark energy up to high redshift which is accessible from GW sources. This extension provides increased flexibility in modeling the EoS and enables a more detailed investigation of dark energy's evolution. Our analysis indicates that, with five years of observation time and a 75% duty cycle using Cosmic Explorer and the Einstein Telescope, it will be possible to measure the dark energy EoS with remarkable precision better than any other cosmological probes in the coming years from bright standard sirens using multi-messenger avenue. These findings highlight the potential of GW observations in synergy with EM telescopes to offer valuable insights into the nature of dark energy, overcoming the current limitations in cosmological measurements.

Generative models such as denoising diffusion models are quickly advancing their ability to approximate highly complex data distributions. They are also increasingly leveraged in scientific machine learning, where samples from the implied data distribution are expected to adhere to specific governing equations. We present a framework that unifies generative modeling and partial differential equation fulfillment by introducing a first-principle-based loss term that enforces generated samples to fulfill the underlying physical constraints. Our approach reduces the residual error by up to two orders of magnitude compared to previous work in a fluid flow case study and outperforms task-specific frameworks in relevant metrics for structural topology optimization. We also present numerical evidence that our extended training objective acts as a natural regularization mechanism against overfitting. Our framework is simple to implement and versatile in its applicability for imposing equality and inequality constraints as well as auxiliary optimization objectives.

Automated segmentation of retinal optical coherence tomography (OCT) images has become an important recent direction in machine learning for medical applications. We hypothesize that the anatomic structure of layers and their high-frequency variation in OCT images make retinal OCT a fitting choice for extracting spectral-domain features and combining them with spatial domain features. In this work, we present Upsilon-Net, an architecture that combines the frequency domain features with the image domain to improve the segmentation performance of OCT images. The results of this work demonstrate that the introduction of two branches, one for spectral and one for spatial domain features, brings a very significant improvement in fluid segmentation performance and allows outperformance as compared to the well-known U-Net model. Our improvement was 13% on the fluid segmentation dice score and 1.9% on the average dice score. Finally, removing selected frequency ranges in the spectral domain demonstrates the impact of these features on the fluid segmentation outperformance.

Physical systems commonly exhibit spatially varying complexity, presenting a significant challenge for neural PDE solvers. While Graph Neural Networks can handle the irregular meshes required for complex geometries and boundary conditions, they still apply uniform computational effort across all nodes regardless of the underlying physics complexity. This leads to inefficient resource allocation where computationally simple regions receive the same treatment as complex phenomena. We address this challenge by introducing Adaptive Mesh Quantization: spatially adaptive quantization across mesh node, edge, and cluster features, dynamically adjusting the bit-width used by a quantized model. We propose an adaptive bit-width allocation strategy driven by a lightweight auxiliary model that identifies high-loss regions in the input mesh. This enables dynamic resource distribution in the main model, where regions of higher difficulty are allocated increased bit-width, optimizing computational resource utilization. We demonstrate our framework's effectiveness by integrating it with two state-of-the-art models, MP-PDE and GraphViT, to evaluate performance across multiple tasks: 2D Darcy flow, large-scale unsteady fluid dynamics in 2D, steady-state Navier-Stokes simulations in 3D, and a 2D hyper-elasticity problem. Our framework demonstrates consistent Pareto improvements over uniformly quantized baselines, yielding up to 50% improvements in performance at the same cost.

We derive a thermodynamically-consistent model of fluid flow through a poroelastic medium. Starting from elastic and fluid free-energy densities, an energy-dissipation rate, and a kinematic constraint, the force-balance equations are derived using variational principles, with the pressure--density constitutive relation emerging as a direct consequence of the variational structure; the same kinematic constraint also supplies the total-flux transport structure. In the ideal-gas limit, the model linearization recovers the classical linear Biot equations. For power-law fluid energies, it yields isentropic pressure--density relations. A key advantage of the variational formulation is that extensions to richer physics, such as thermal effects, chemical reactions, or multi-component fluids, can be incorporated systematically by augmenting the energy and dissipation functionals without redesigning the force-balance or transport closure. We support the model with an energy-compatible two-field discretization and study consolidation under a surface load with three lateral-boundary treatments and three fluid-compressibility exponents.

Recent advances in generative foundational models, often termed "world models," have propelled interest in applying them to critical tasks like robotic planning and autonomous system training. For reliable deployment, these models must exhibit high physical fidelity, accurately simulating real-world dynamics. Existing physics-based video benchmarks, however, suffer from entanglement, where a single test simultaneously evaluates multiple physical laws and concepts, fundamentally limiting their diagnostic capability. We introduce WorldBench, a novel video-based benchmark specifically designed for concept-specific, disentangled evaluation, allowing us to rigorously isolate and assess understanding of a single physical concept or law at a time. To make WorldBench comprehensive, we design benchmarks at two different levels: 1) an evaluation of intuitive physical understanding with concepts such as object permanence or scale/perspective, and 2) an evaluation of low-level physical constants and material properties such as friction coefficients or fluid viscosity. When SOTA video-based world models are evaluated on WorldBench, we find specific patterns of failure in particular physics concepts, with all tested models lacking the physical consistency required to generate reliable real-world interactions. Through its concept-specific evaluation, WorldBench offers a more nuanced and scalable framework for rigorously evaluating the physical reasoning capabilities of video generation and world models, paving the way for more robust and generalizable world-model-driven learning.

A "match cut" is a common video editing technique where a pair of shots that have a similar composition transition fluidly from one to another. Although match cuts are often visual, certain match cuts involve the fluid transition of audio, where sounds from different sources merge into one indistinguishable transition between two shots. In this paper, we explore the ability to automatically find and create "audio match cuts" within videos and movies. We create a self-supervised audio representation for audio match cutting and develop a coarse-to-fine audio match pipeline that recommends matching shots and creates the blended audio. We further annotate a dataset for the proposed audio match cut task and compare the ability of multiple audio representations to find audio match cut candidates. Finally, we evaluate multiple methods to blend two matching audio candidates with the goal of creating a smooth transition. Project page and examples are available at: https://denfed.github.io/audiomatchcut/

Diffusion-based models have gained wide adoption in the virtual human generation due to their outstanding expressiveness. However, their substantial computational requirements have constrained their deployment in real-time interactive avatar applications, where stringent speed, latency, and duration requirements are paramount. We present a novel audio-driven portrait video generation framework based on the diffusion model to address these challenges. Firstly, we propose robust variable-length video generation to reduce the minimum time required to generate the initial video clip or state transitions, which significantly enhances the user experience. Secondly, we propose a consistency model training strategy for Audio-Image-to-Video to ensure real-time performance, enabling a fast few-step generation. Model quantization and pipeline parallelism are further employed to accelerate the inference speed. To mitigate the stability loss incurred by the diffusion process and model quantization, we introduce a new inference strategy tailored for long-duration video generation. These methods ensure real-time performance and low latency while maintaining high-fidelity output. Thirdly, we incorporate class labels as a conditional input to seamlessly switch between speaking, listening, and idle states. Lastly, we design a novel mechanism for fine-grained facial expression control to exploit our model's inherent capacity. Extensive experiments demonstrate that our approach achieves low-latency, fluid, and authentic two-way communication. On an NVIDIA RTX 4090D, our model achieves a maximum of 78 FPS at a resolution of 384x384 and 45 FPS at a resolution of 512x512, with an initial video generation latency of 140 ms and 215 ms, respectively.

We develop a deep reinforcement learning method for training a jellyfish-like swimmer to effectively track a moving target in a two-dimensional flow. This swimmer is a flexible object equipped with a muscle model based on torsional springs. We employ a deep Q-network (DQN) that takes the swimmer's geometry and dynamic parameters as inputs, and outputs actions which are the forces applied to the swimmer. In particular, we introduce an action regulation to mitigate the interference from complex fluid-structure interactions. The goal of these actions is to navigate the swimmer to a target point in the shortest possible time. In the DQN training, the data on the swimmer's motions are obtained from simulations conducted using the immersed boundary method. During tracking a moving target, there is an inherent delay between the application of forces and the corresponding response of the swimmer's body due to hydrodynamic interactions between the shedding vortices and the swimmer's own locomotion. Our tests demonstrate that the swimmer, with the DQN agent and action regulation, is able to dynamically adjust its course based on its instantaneous state. This work extends the application scope of machine learning in controlling flexible objects within fluid environments.

We study the dynamics of an inextensible, closed interface subject to bending forces and immersed in a two-dimensional and incompressible Stokes fluid. We formulate the problem as a boundary integral equation in terms of the tangent angle and demonstrate the well-posedness in suitable time-weighted spaces of the resulting nonlinear and nonlocal system. The solution is furthermore shown to be smooth for positive times. Numerical computations are performed to initiate the study of the long-time behavior of the interface.

Recent breakthroughs in self-supervised learning have enabled the use of large unlabeled datasets to train visual foundation models that can generalize to a variety of downstream tasks. While this training paradigm is well suited for the medical domain where annotations are scarce, large-scale pre-training in the medical domain, and in particular pathology, has not been extensively studied. Previous work in self-supervised learning in pathology has leveraged smaller datasets for both pre-training and evaluating downstream performance. The aim of this project is to train the largest academic foundation model and benchmark the most prominent self-supervised learning algorithms by pre-training and evaluating downstream performance on large clinical pathology datasets. We collected the largest pathology dataset to date, consisting of over 3 billion images from over 423 thousand microscopy slides. We compared pre-training of visual transformer models using the masked autoencoder (MAE) and DINO algorithms. We evaluated performance on six clinically relevant tasks from three anatomic sites and two institutions: breast cancer detection, inflammatory bowel disease detection, breast cancer estrogen receptor prediction, lung adenocarcinoma EGFR mutation prediction, and lung cancer immunotherapy response prediction. Our results demonstrate that pre-training on pathology data is beneficial for downstream performance compared to pre-training on natural images. Additionally, the DINO algorithm achieved better generalization performance across all tasks tested. The presented results signify a phase change in computational pathology research, paving the way into a new era of more performant models based on large-scale, parallel pre-training at the billion-image scale.