Daily Papers

Unmanned underwater vehicles (UUVs) are essential for marine exploration and research. However, conventional designs often struggle with limited maneuverability in complex and dynamic underwater environments. This paper presents an orientation-adjustable thruster UUV (OAT-UUV) with vector thrusters, enabling full six-degree-of-freedom (6-DOF) motion. and composite maneuvers. To overcome challenges associated with uncertain model parameters and environmental disturbances, a vision-based tracking control system based on a novel feedforward adaptive model predictive controller (FF-AMPC) is proposed to achieve robust object tracking, which integrates realtime state feedback with adaptive parameter updating. Extensive experiments, including closed-loop tracking and composite motion tests in real-world environment, have been conducted. The obtained results demonstrate that the orientation-adjustable propulsion design significantly improves the underwater maneuverability, while the FF-AMPC controller achieves a 49.1% hovering improvement compared to conventional controller.

Hall effect thrusters are one of the most versatile and popular electric propulsion systems for space use. Industry trends towards interplanetary missions arise advances in design development of such propulsion systems. It is understood that correct sizing of discharge channel in Hall effect thruster impact performance greatly. Since the complete physics model of such propulsion system is not yet optimized for fast computations and design iterations, most thrusters are being designed using so-called scaling laws. But this work focuses on rather novel approach, which is outlined less frequently than ordinary scaling design approach in literature. Using deep machine learning it is possible to create predictive performance model, which can be used to effortlessly get design of required hall thruster with required characteristics using way less computational power than design from scratch and way more flexible than usual scaling approach.

Hall-effect thrusters (HETs) are widely used for modern near-earth spacecraft propulsion and are vital for future deep-space missions. Methods of modeling HETs are developing rapidly. However, such methods are not yet precise enough and cannot reliably predict the parameters of a newly designed thruster, mostly due to the enormous computational cost of a HET plasma simulation. Another approach is to use scaling techniques based on available experimental data. This paper proposes an approach for scaling HETs using neural networks and other modern machine learning methods. The new scaling model was built with information from an extensive database of HET parameters collected from published papers. Predictions of the new scaling model are valid for the operating parameters domain covered by the database. During the design, this model can help HET developers estimate the performance of a newly-designed thruster. At the stage of experimental research, the model can be used to compare the achieved characteristics of the studied thruster with the level obtained by other developers. A comparison with the state-of-the-art HET scaling model is also presented.

Bidirectional thrust grants quadrotors a second equilibrium condition and increased control authority, expanding the envelope of possible aggressive maneuvers and enabling inverted flight, perching, and sensing. Prior geometric control approaches extend differential flatness through Hopf fibration-based attitude representations to support bidirectional thrust, but struggle with actuator saturation and motor reversal delay during inversions, requiring heuristic thrust posture scheduling and waypoint tuning. We propose a learning-based framework that modulates a constant reference trajectory to perform compact, position-constrained quadrotor inversions while remaining compatible with traditional trajectory generation and tracking across flight regimes. Separate policies are trained via reinforcement learning for nominal-to-inverted and inverted-to-nominal transitions. In JAX-based simulation, the proposed method achieves the lowest position deviation and settling time across all evaluated baselines, reducing position root mean square error (RMSE) by 32% and settling time by 57% relative to the strongest optimization-based baseline. Hardware experiments demonstrate successful inversion across multiple yaw configurations with position RMSE below 0.35m, and compatibility with downstream trajectory generation and control through circular flight in both regimes. Additionally, we provide an open-source implementation of the proposed framework.

In this paper, we address a crucial point regarding the description of moderate to high Reynolds numbers aquatic swimmers. For decades, swimming animals have been classified in two different families of propulsive mechanisms based on the Reynolds number: the "resistive" swimmers, using local friction to produce the necessary thrust force for locomotion at low Reynolds number and the "reactive" swimmers, lying in the high Reynolds range, and using added mass acceleration (described by perfect fluid theory). However, inertial swimmers are also systems that dissipate energy, due to their finite size, therefore involving strong resistive contributions, even for high Reynolds numbers. Using a complete model for the hydrodynamic forces, involving both reactive and resistive contributions, we revisit here the physical mechanisms responsible for the thrust production of such swimmers. We show, for instance, that the resistive part of the force balance is as crucial as added mass effects in the modeling of the thrust force, especially for elongated species. The conclusions brought by this work may have significant contributions to the understanding of complex swimming mechanisms, especially for the future design of artificial swimmers.

The aim of this study is to develop surrogate models for quick, accurate prediction of thrust forces generated through flapping fin propulsion for given operating conditions and fin geometries. Different network architectures and configurations are explored to model the training data separately for the lead fin and rear fin of a tandem fin setup. We progressively improve the data representation of the input parameter space for model predictions. The models are tested on three unseen fin geometries and the predictions validated with computational fluid dynamics (CFD) data. Finally, the orders of magnitude gains in computational performance of these surrogate models, compared to experimental and CFD runs, vs their tradeoff with accuracy is discussed within the context of this tandem fin configuration.

Unmodeled aerodynamic disturbances pose a key challenge for multirotor flight when multiple vehicles are in close proximity to each other. However, certain missions require two multirotors to approach each other within 1-2 body-lengths of each other and hold formation -- we consider one such practical instance: vertically docking two multirotors in the air. In this leader-follower setting, the follower experiences significant downwash interference from the leader in its final docking stages. To compensate for this, we employ a learnt downwash model online within an optimal feedback controller to accurately track a docking maneuver and then hold formation. Through real-world flights with different maneuvers, we demonstrate that this compensation is crucial for reducing the large vertical separation otherwise required by conventional/naive approaches. Our evaluations show a tracking error of less than 0.06m for the follower (a 3-4x reduction) when approaching vertically within two body-lengths of the leader. Finally, we deploy the complete system to effect a successful physical docking between two airborne multirotors in a single smooth planned trajectory.

Underwater robots combine complementary sensors whose reliability changes abruptly with water visibility, viewpoint, and vehicle motion. We introduce AquaJEPA, an action-conditioned joint-embedding predictive model that fuses an RGB camera, forward-looking sonar, and proprioception with explicit sensor validity. It predicts a future latent target conditioned on eight-thruster commands and supplies velocity and sonar-profile predictions to a shared receding-horizon planner. We study the method in Stonefish against reactive, state-only, ordinary multimodal, supervised dynamics, and recurrent world-model baselines. We further isolate the EMA target, action margin, masks, and modality dropout. A preregistered 120-environment replication comprises five independent replicates of a grid crossing three unseen obstacle maps, four water-visibility coefficients, and nominal versus shifted dynamics, while intermittently removing DVL observations. In 120 fresh paired environments with scheduled DVL loss, AquaJEPA reaches 74 goals, versus 68 for both state-only and the recurrent world model, and attains the lowest mean final error (0.906 m). Paired final-error reductions relative to ordinary multimodal prediction, supervised dynamics, and the recurrent world model are 0.273 m (95% CI: 0.190-0.356), 0.364 m (0.260-0.468), and 0.106 m (0.025-0.187), respectively. AquaJEPA therefore achieves the best aggregate closed-loop performance and significantly outperforms three action-conditioned predictive baselines in paired final error; its advantage over state-only remains statistically unresolved.

Spacecraft rendezvous on elliptical orbits must hold a safety corridor under navigation noise, unmodelled perturbations, and thrust errors driven by propellant mass uncertainty. This paper develops a tube-based model predictive controller for the Yamanaka-Ankersen linear time-varying dynamics, carrying constraint-tightening tube methods from circular to elliptical orbits. A horizon-dependent, element-wise error bound propagates the actual closed-loop matrices along the prediction window, so early prediction steps keep nearly the full corridor that a constant-width tube would surrender. A multiplicative-to-additive conversion folds mass and thrust uncertainty into the same tightening recursion, and a Perron-Frobenius spectral-radius condition supplies a computable certificate that the tightening converges, with an explicit input-to-state stability gain. In a paired Monte Carlo campaign on a Mars sample-return orbit, the tube controller cuts mean corridor violations by more than an order of magnitude against a nominal predictive baseline at comparable fuel cost. A nonlinear truth-model test with oblateness perturbations well beyond the assumed disturbance budget leaves the corridor unviolated, and when the design envelope is exceeded the tightened problem becomes infeasible and the controller reverts to a saturated linear fallback, making the loss of guarantee explicit rather than silent. The construction requires only element-wise arithmetic and an open-source quadratic-programming solver.

Accurate aerodynamic modeling of satellites in very low Earth orbit (VLEO) requires gas-surface interaction (GSI) models that capture the full velocity spectrum from thermal to orbital speeds. Atmospheric particles initially strike spacecraft surfaces at hypersonic velocities of 6 000 - 10 000 m/s. Due to surface roughness and complex geometries, especially within air-breathing electric propulsion (ABEP) intake systems, multiple collisions occur, progressively reducing the particle velocities. A recent machine learning framework for deriving scattering kernels from molecular dynamics (MD) simulations has shown promise, but remains limited to high-velocity single impacts and possibly violates fundamental equilibrium principles such as detailed balance. This work extends this machine learning based scattering kernel to cover the complete velocity range using conditional normalizing flows trained with physics-informed constraints, enabling accurate modeling of multi-bounce scenarios in realistic VLEO applications. We train a conditional Real-valued Non-Volume Preserving (cRealNVP) model on expanded molecular dynamics simulations covering velocities from thermal to hypersonic speeds, incorporating a detailed balance loss term. The resulting model demonstrates improved accuracy compared to previous approaches even in the original high-velocity regime, while successfully capturing thermal-velocity scattering. Quantitative assessment shows that thermalization is approximated within acceptable tolerances. This framework provides essential capabilities for accurate ABEP intake optimization and VLEO mission planning while offering a general methodology applicable to broader rarefied gas dynamics problems requiring thermodynamic consistency.