Daily Papers

Aerial grasp-and-lift tasks require whole-body coordination across approach, acquisition, and lifting under partial target observations. Early approach failures can limit exposure to later task stages during training, while changing visibility complicates alignment and closure timing during execution. We present a recurrent teacher-student framework that learns a single policy in simulation to jointly command flight, arm motion, and gripper closure without an explicit task-phase input. A privileged teacher learns through reinforcement learning with a critical-state curriculum that exposes acquisition and lifting states before connecting them to normal approach trajectories. Its behavior is distilled into a recurrent visual student that replaces privileged target states with dual-view point clouds and proprioception, integrating observation history for closed-loop control. A dedicated closure objective supervises closure timing from sustained model-defined readiness sequences. Training and primary evaluation use a simulated acquisition-and-payload model with condition-triggered latching, virtual attachment, and wrench-based payload loading for short-distance lifting. Across 8,996 completed simulation episodes under this model, the frozen student achieves full-task success rates of 99.97%, 97.14%, and 95.84% under nominal, physics/control-randomized, and additional camera-randomized conditions, respectively. The nominal latch-count-weighted mean of per-seed 90th-percentile alignment errors at acquisition is 8.12 mm.

Recent Weak Supervision (WS) approaches have had widespread success in easing the bottleneck of labeling training data for machine learning by synthesizing labels from multiple potentially noisy supervision sources. However, proper measurement and analysis of these approaches remain a challenge. First, datasets used in existing works are often private and/or custom, limiting standardization. Second, WS datasets with the same name and base data often vary in terms of the labels and weak supervision sources used, a significant "hidden" source of evaluation variance. Finally, WS studies often diverge in terms of the evaluation protocol and ablations used. To address these problems, we introduce a benchmark platform, WRENCH, for thorough and standardized evaluation of WS approaches. It consists of 22 varied real-world datasets for classification and sequence tagging; a range of real, synthetic, and procedurally-generated weak supervision sources; and a modular, extensible framework for WS evaluation, including implementations for popular WS methods. We use WRENCH to conduct extensive comparisons over more than 120 method variants to demonstrate its efficacy as a benchmark platform. The code is available at https://github.com/JieyuZ2/wrench.

We present FORGE, a method for sim-to-real transfer of force-aware manipulation policies in the presence of significant pose uncertainty. During simulation-based policy learning, FORGE combines a force threshold mechanism with a dynamics randomization scheme to enable robust transfer of the learned policies to the real robot. At deployment, FORGE policies, conditioned on a maximum allowable force, adaptively perform contact-rich tasks while avoiding aggressive and unsafe behaviour, regardless of the controller gains. Additionally, FORGE policies predict task success, enabling efficient termination and autonomous tuning of the force threshold. We show that FORGE can be used to learn a variety of robust contact-rich policies, including the forceful insertion of snap-fit connectors. We further demonstrate the multistage assembly of a planetary gear system, which requires success across three assembly tasks: nut threading, insertion, and gear meshing. Project website can be accessed at https://noseworm.github.io/forge/.

This study proposes a modularized deep learning-based loading protocol for optimal parameter estimation of Bouc-Wen (BW) class models. The protocol consists of two key components: optimal loading history construction and CNN-based rapid parameter estimation. Each component is decomposed into independent sub-modules tailored to distinct hysteretic behaviors-basic hysteresis, structural degradation, and pinching effect-making the protocol adaptable to diverse hysteresis models. Three independent CNN architectures are developed to capture the path-dependent nature of these hysteretic behaviors. By training these CNN architectures on diverse loading histories, minimal loading sequences, termed loading history modules, are identified and then combined to construct an optimal loading history. The three CNN models, trained on the respective loading history modules, serve as rapid parameter estimators. Numerical evaluation of the protocol, including nonlinear time history analysis of a 3-story steel moment frame and fragility curve construction for a 3-story reinforced concrete frame, demonstrates that the proposed protocol significantly reduces total analysis time while maintaining or improving estimation accuracy. The proposed protocol can be extended to other hysteresis models, suggesting a systematic approach for identifying general hysteresis models.

Serving many task-specialized LLM variants is often limited by the large size of fine-tuned checkpoints and the resulting cold-start latency. Since fine-tuned weights differ from their base model by relatively small structured residuals, a natural approach is to represent them as compressed deltas. We propose a simple 1-bit delta scheme that stores only the sign of the weight difference together with lightweight per-axis (row/column) FP16 scaling factors, learned from a small calibration set. This design preserves the compactness of 1-bit deltas while more accurately capturing variation across weight dimensions, leading to improved reconstruction quality over scalar alternatives. From a systems perspective, a streamlined loader that transfers packed deltas in a single operation per module reduces cold-start latency and storage overhead, with artifacts several times smaller than a full FP16 checkpoint. The method is drop-in, requires minimal calibration data, and maintains inference efficiency by avoiding dense reconstruction. Our experimental setup and source code are available at https://github.com/kuiumdjiev/Per-Axis-Weight-Deltas-for-Frequent-Model-Updates.

The precision, stability, and performance of lightweight high-strength steel structures in heavy machinery is affected by their highly nonlinear dynamics. This, in turn, makes control more difficult, simulation more computationally intensive, and achieving real-time autonomy, using standard approaches, impossible. Machine learning through data-driven, physics-informed and physics-inspired networks, however, promises more computationally efficient and accurate solutions to nonlinear dynamic problems. This study proposes a novel framework that has been developed to estimate real-time structural deflection in hydraulically actuated three-dimensional systems. It is based on SLIDE, a machine-learning-based method to estimate dynamic responses of mechanical systems subjected to forced excitations.~Further, an algorithm is introduced for the data acquisition from a hydraulically actuated system using randomized initial configurations and hydraulic pressures.~The new framework was tested on a hydraulically actuated flexible boom with various sensor combinations and lifting various payloads. The neural network was successfully trained in less time using standard parameters from PyTorch, ADAM optimizer, the various sensor inputs, and minimal output data. The SLIDE-trained neural network accelerated deflection estimation solutions by a factor of 10^7 in reference to flexible multibody simulation batches and provided reasonable accuracy. These results support the studies goal of providing robust, real-time solutions for control, robotic manipulators, structural health monitoring, and automation problems.

This paper introduces ByteWrist, a novel highly-flexible and anthropomorphic parallel wrist for robotic manipulation. ByteWrist addresses the critical limitations of existing serial and parallel wrists in narrow-space operations through a compact three-stage parallel drive mechanism integrated with arc-shaped end linkages. The design achieves precise RPY (Roll-Pitch-Yaw) motion while maintaining exceptional compactness, making it particularly suitable for complex unstructured environments such as home services, medical assistance, and precision assembly. The key innovations include: (1) a nested three-stage motor-driven linkages that minimize volume while enabling independent multi-DOF control, (2) arc-shaped end linkages that optimize force transmission and expand motion range, and (3) a central supporting ball functioning as a spherical joint that enhances structural stiffness without compromising flexibility. Meanwhile, we present comprehensive kinematic modeling including forward / inverse kinematics and a numerical Jacobian solution for precise control. Empirically, we observe ByteWrist demonstrates strong performance in narrow-space maneuverability and dual-arm cooperative manipulation tasks, outperforming Kinova-based systems. Results indicate significant improvements in compactness, efficiency, and stiffness compared to traditional designs, establishing ByteWrist as a promising solution for next-generation robotic manipulation in constrained environments.

Many manipulation tasks require careful force modulation. With insufficient force the task may fail, while excessive force could cause damage. The high cost, bulky size and fragility of commercial force/torque (F/T) sensors have limited large-scale, force-aware policy learning. We introduce UMI-FT, a handheld data-collection platform that mounts compact, six-axis force/torque sensors on each finger, enabling finger-level wrench measurements alongside RGB, depth, and pose. Using the multimodal data collected from this device, we train an adaptive compliance policy that predicts position targets, grasp force, and stiffness for execution on standard compliance controllers. In evaluations on three contact-rich, force-sensitive tasks (whiteboard wiping, skewering zucchini, and lightbulb insertion), UMI-FT enables policies that reliably regulate external contact forces and internal grasp forces, outperforming baselines that lack compliance or force sensing. UMI-FT offers a scalable path to learning compliant manipulation from in-the-wild demonstrations. We open-source the hardware and software to facilitate broader adoption at:https://umi-ft.github.io/.

Data-driven engineering design is constrained by the lack of large-scale 3D datasets that pair geometry with physics-based performance labels. In particular, existing 3D data augmentation techniques have limitations in preserving subtle and diverse geometric variations, and it remains difficult to automate the subsequent simulation-labeling process, where boundary conditions vary depending on the generated geometry. We present DeepJEB++, a foundation-model-driven data-augmentation framework that expands a small seed set of jet engine brackets into a large, simulation-labeled 3D dataset under constrained resources. Our key idea is to augment in the data-rich 2D latent space, then transfer to 3D. In Stage 1, we fine-tune a pretrained 2D latent diffusion model on multi-view renders and synthesize novel views by latent interpolation, retaining manufacturable designs through a vision-language-model (VLM) quality filter. In Stage 2, the validated images are lifted to 3D meshes by a domain-adapted generative foundation model. In Stage 3, an automated pipeline recognizes the load and bolt interfaces on each mesh and assigns finite-element labels -- mass, stress, and displacement -- without manual intervention. We assess augmentation quality along three intrinsic axes: manufacturability, label fidelity against the SimJEB ground truth, and distributional consistency. Starting from fewer than 400 seed designs, DeepJEB++ yields 15,360 simulation-labeled 3D brackets -- a 40x expansion -- using a single GPU per stage. The dataset will be made publicly available to support reproducible engineering-AI research.

Real-world robotic assembly at sub-millimeter tolerances demands spatial precision, compliant interaction, and robustness to contact failures. We present Facet-0, a robotic foundation model that predicts and values the contact consequences of its actions. Facet-0 unifies multimodal representation learning and reinforcement learning (RL) post-training around a joint action-wrench proposal: a causal wrench history is aligned with vision-language semantics and kinematic state, and flow matching generates each action chunk together with the future wrist-wrench profile it is expected to induce. Deployment rollouts train a distributional Action-Wrench Critic to distinguish motions with similar task progress but different contact outcomes, while phase-aware rewards and contact-selective credit concentrate policy improvement on decisive interactions. To accommodate part-specific dynamics, a lightweight bounded actor reuses the frozen representation for on-robot adaptation; RL remains defined over executable Cartesian actions, while an auxiliary wrench head preserves predictive, non-commanded action-contact coupling. Trained on ManuFacet-1K, a 1,000-hour force-synchronized corpus spanning three embodiments and multiple manufacturing cells, the bounded task-adapted system reaches 82% mean success on five sub-millimeter computer-assembly tasks, compared with 15% for the strongest baseline, with 0.5 mm placement accuracy and 50 ms command latency.

Dexterous robot manipulation can benefit from the abundance of human demonstrations, but transferring such demonstrations to robot policies remains challenging. We present Contact Wrench Guidance from Human Demonstration in Robotic Dexterous Manipulation (CHORD), a framework for long-horizon manipulation of rigid and articulated objects with reinforcement learning. The key idea is object-centric contact wrench space guidance: we represent human and robot motions by the forces and torques they can induce on the object, enabling similarity to be measured by the induced instantaneous motions. This guidance makes reinforcement learning more scalable for contact-rich dexterous manipulation. We further introduce a large-scale simulation benchmark with 4,739 bimanual dexterous manipulation tasks, constructed from motion-capture datasets and reconstructed in-house videos. Evaluated on 1,831 benchmark tasks, CHORD achieves an average success rate of 82.12%, demonstrating strong scalability. CHORD also generalizes to whole-body manipulation from hand-only and third-person demonstrations, achieving a 90.77% success rate, and the learned policies transfer to the real world in both open-loop and closed-loop settings.

Interlocking brick assemblies provide a standardized yet challenging testbed for contact-rich and long-horizon robotic manipulation, but existing rigid-body simulators do not faithfully capture snap-fit mechanics. We present BrickSim, the first real-time physics-based simulator for interlocking brick assemblies. BrickSim introduces a compact force-based mechanics model for snap-fit connections and solves the resulting internal force distribution using a structured convex quadratic program. Combined with a hybrid architecture that delegates rigid-body dynamics to the underlying physics engine while handling snap-fit mechanics separately, BrickSim enables real-time, high-fidelity simulation of assembly, disassembly, and structural collapse. On 150 real-world assemblies, BrickSim achieves 100% accuracy in static stability prediction with an average solve time of 5 ms. In dynamic drop tests, it also faithfully reproduces real-world structural collapse, precisely mirroring both the occurrence of breakage and the specific breakage locations. Built on Isaac Sim, BrickSim further supports seamless integration with a wide variety of robots and existing pipelines. We demonstrate robotic construction of brick assemblies using BrickSim, highlighting its potential as a foundation for research in dexterous, long-horizon robotic manipulation. BrickSim is open-source, and the code is available at https://github.com/intelligent-control-lab/BrickSim.

Advances in learning-based robotic manipulation, such as Vision-Language-Action (VLA) models and Video Action Models (VAMs), heavily rely on high-quality teleoperation data. Their capabilities are strictly upper-bounded by the quality of the underlying human demonstrations. Current gradient-based retargeting algorithms often converge to different local minima, resulting in jitter that affects data quality and teleoperation experience. To address this, we introduce the Sampling-Based Retargeter (SBR), a novel gradient-free retargeting method drawn from the rich literature of sampling-based control and explicitly designed for low-jitter, real-time kinematic retargeting. We evaluate SBR both in simulation and through a rigorous real-world user study involving 18 participants performing 3 complex manipulation tasks. Compared to gradient-based baselines, SBR achieved the highest overall task success rate (54.1%) while significantly reducing operator cognitive fatigue, recording the lowest NASA-TLX workload score (36.4 out of 100). Ultimately, we establish SBR as a highly effective, intuitive retargeter for dexterous manipulation, providing the community with a rigorous benchmarking methodology to guide future retargeting research.

Neural surrogates and operator networks for solving partial differential equation (PDE) problems have attracted significant research interest in recent years. However, most existing approaches are limited in their ability to generalize solutions across varying non-parametric geometric domains. In this work, we address this challenge in the context of Polyethylene Terephthalate (PET) bottle buckling analysis, a representative packaging design problem conventionally solved using computationally expensive finite element analysis (FEA). We introduce a hybrid DeepONet-Transolver framework that simultaneously predicts nodal displacement fields and the time evolution of reaction forces during top load compression. Our methodology is evaluated on two families of bottle geometries parameterized by two and four design variables. Training data is generated using nonlinear FEA simulations in Abaqus for 254 unique designs per family. The proposed framework achieves mean relative L^{2} errors of 2.5-13% for displacement fields and approximately 2.4% for time-dependent reaction forces for the four-parameter bottle family. Point-wise error analyses further show absolute displacement errors on the order of 10^{-4}-10^{-3}, with the largest discrepancies confined to localized geometric regions. Importantly, the model accurately captures key physical phenomena, such as buckling behavior, across diverse bottle geometries. These results highlight the potential of our framework as a scalable and computationally efficient surrogate, particularly for multi-task predictions in computational mechanics and applications requiring rapid design evaluation.

Large language model (LLM)-based agentic frameworks increasingly adopt the paradigm of dynamically generating task-specific agents. We suggest that not only agents but also specialized software modules for scientific and engineering tasks can be generated on demand. We demonstrate this concept in the field of solid mechanics. There, so-called constitutive models are required to describe the relationship between mechanical stress and body deformation. Constitutive models are essential for both the scientific understanding and industrial application of materials. However, even recent data-driven methods of constitutive modeling, such as constitutive artificial neural networks (CANNs), still require substantial expert knowledge and human labor. We present a framework in which an LLM generates a CANN on demand, tailored to a given material class and dataset provided by the user. The framework covers LLM-based architecture selection, integration of physical constraints, and complete code generation. Evaluation on three benchmark problems demonstrates that LLM-generated CANNs achieve accuracy comparable to or greater than manually engineered counterparts, while also exhibiting reliable generalization to unseen loading scenarios and extrapolation to large deformations. These findings indicate that LLM-based generation of physics-constrained neural networks can substantially reduce the expertise required for constitutive modeling and represent a step toward practical end-to-end automation.

To enhance lifting-load estimation accuracy in industrial upper-limb assistive exoskeletons, this study proposes a machine learning-based approach using insole pressure sensors. Unlike traditional methods that rely on electromyography (EMG), force sensors, or posture data, insole pressure sensors provide a non-invasive, posture-independent, and stable solution suitable for long-term use. Lifting load data ranging from 2 to 10 kg (0.5 kg intervals) were collected from five subjects. Two data representations were investigated: channel-based vectors and map-based images. For the channel-based approach, conventional regression models (SVR, MLP, and Elastic Net) were trained on pooled data from all subjects to assess inter-subject generalization, specifically testing the ability to infer load levels unseen during training. In parallel, a preliminary feasibility study was conducted for the map-based deep learning model (MobileNetV2) using inner-subject data. Results indicate that the channel-based SVR achieved the most balanced accuracy and generalization performance, with a mean absolute error of 0.547 kg. These findings demonstrate the feasibility and advantages of using insole pressure data for variable load estimation, supporting control strategies in industrial exoskeleton applications.

We introduce IMPACT, a synchronized five-view RGB-D dataset for deployment-oriented industrial procedural understanding, built around real assembly and disassembly of a commercial angle grinder with professional-grade tools. To our knowledge, IMPACT is the first real industrial assembly benchmark that jointly provides synchronized ego-exo RGB-D capture, decoupled bimanual annotation, compliance-aware state tracking, and explicit anomaly--recovery supervision within a single real industrial workflow. It comprises 112 trials from 13 participants totaling 39.5 hours, with multi-route execution governed by a partial-order prerequisite graph, a six-category anomaly taxonomy, and operator cognitive load measured via NASA-TLX. The annotation hierarchy links hand-specific atomic actions to coarse procedural steps, component assembly states, and per-hand compliance phases, with synchronized null spans across views to decouple perceptual limitations from algorithmic failure. Systematic baselines reveal fundamental limitations that remain invisible to single-task benchmarks, particularly under realistic deployment conditions that involve incomplete observations, flexible execution paths, and corrective behavior. The full dataset, annotations, and evaluation code are available at https://github.com/Kratos-Wen/IMPACT.

Development of dexterous manipulation hardware has primarily focused on hands and grippers. However, these end-effectors are often paired with bulky and highly stiff wrists that limit performance in human environments. More designs have adopted backdrivable actuation, but are still difficult to model and control due to coupled kinematics or high mechanical inertia from heavy links. We present DexWrist, a robotic wrist that advances manipulation in highly constrained environments and enables dynamic, contact-rich tasks. We achieve this by combining quasi-direct drive actuation with a decoupled parallel kinematic mechanism in a compact design. It delivers 3.75 +/- 0.05 Nm rated torque, 0.33 +/- 0.06 Nm backdrive torque, 10.15 +/- 1.34 Hz torque bandwidth, +/- 40 degrees ROM in both DOFs, and a one-to-one motor-to-DOF mapping in a 0.97 kg package. In practice, these properties increase workspace in cluttered environments and stabilize contact without the need for finely tuned admittance control. We evaluate DexWrist as a drop-in wrist upgrade in simulation and on two robot arms performing representative constrained and contact-rich tasks. In learned policy evaluations, DexWrist achieved 50-76% relative improvements in success rate, and reduced autonomous task completion times by 3-5x. More details about DexWrist can be found at https://dexwrist.csail.mit.edu.

Deformable object manipulation poses challenges beyond task completion: successful execution must also maintain safe physical interaction, holding the object stably without slip or drop while avoiding excessive deformation. However, existing manipulation benchmarks are predominantly success-oriented and rarely evaluate whether a policy remains physically safe throughout execution. We present SoftVTBench, a safety-aware visuo-tactile benchmark for physically constrained deformable object manipulation. Built in Isaac Sim with finite-element-simulated deformable objects, SoftVTBench provides multi-view RGB observations, RGB tactile sensing with marker motion, proprioception, and language instructions, and defines four matched task suites over object type (deformable vs. rigid) and variation axis (object vs. spatial). It separately reports Goal Success and Safety Success; the latter additionally requires no drop and peak deformation below a calibrated object-specific threshold, measured from policy-hidden privileged Finite Element Method (FEM) states. We implement pi0.5-based baselines under this protocol. Experiments show that success-only evaluation substantially overstates policy performance, as a large fraction of goal-completing rollouts still violate physical safety. Furthermore, incorporating tactile sensing improves Safety Success (e.g., from 21.4% to 35.6% on object-centric deformable tasks) and reduces object deformation during execution, while maintaining comparable Goal Success. SoftVTBench provides a reproducible benchmark for studying visuo-tactile deformable manipulation under physical interaction constraints.

Flagship Mixture-of-Experts (MoE) models are growing fast along two axes at once: total parameter count and the number of experts. In elastic deployment scenarios, many GPUs across many nodes must become serving-ready quickly, and this growth makes weight loading a noticeable part of the latency budget. Even on NVIDIA's GB300 NVL72, today's state-of-the-art loaders leave most of that bandwidth unused. The losses are structural: (C1) weight memory is fragmented into tens of thousands of per-tensor objects, so transfers run far below link bandwidth; (C2) cross-node replication is gated by NCCL communicator setup, which costs 10-110 s before a single weight byte moves; and (C3) the existing cross-node GPU->GPU clone path is serial and scales poorly to concurrent multi-node bring-up. We present FlashBoot, a hardware-friendly, framework-workflow co-designed weight-loading subsystem built on SGLang. At its core is FabricArena, a contiguous, exportable and inter-node addressable tensor memory layout. On top of it, FlashLoad loads from CPU as a single bulk, zero-copy transfer, and FlashClone replicates a resident model from a remote GPU via a remote-mapping mechanism that removes NCCL setup. In experiments on NVL72 with DeepSeek-V4-Pro and DeepSeek-V4-Flash, FlashClone maps remote weight memory in ~10 ms (versus 10-110 s for NCCL) and sustains >=700 GB/s per clone. Against the state of the art, FlashBoot accelerates single-node weight loading by up to 50x (from 20.1 s to 0.4 s) and concurrent rack-level weight loading by >270x (from 87 s to 0.32 s). Our code will be made publicly available.

EdgeAI systems are increasingly employing computer vision applications to enable intelligent, on-device decision-making in real-time. However, these deployments face highly dynamic operational conditions, with fluctuating constraints on latency, power availability, and memory resources. Deep Neural Networks (DNN), which follow fixed computational execution flows, lack the flexibility to adapt to such variability, resulting in inefficient and suboptimal performance in edge scenarios. This underscores the need for architectures that are not only efficient but also dynamically scalable at runtime. In this paper, we propose Elastoformer: A framework that transforms conventional neural networks (NN) into Elastic NN capable of real-time elastic inference. Unlike the conventional bag-of-models approach, which requires maintaining multiple independent models for different operating conditions, Elastoformer offers a single, modular solution that dynamically switches between multiple modes of operation at runtime, adapting efficiently to the changing computational budgets of edge devices without the overhead of managing separate models. Experiments reveal that our framework achieves up to 85% reduction in computation FLOPs, 50% reduction in latency and 76% reduction in memory overhead, while showcasing the architecture agnostic nature of the framework across both Vision Transformers and CNNs. Our code is available at https://github.com/sudaksh14/Elastoformer.

We propose a new strategy for applying large pre-trained language models to novel tasks when labeled training data is limited. Rather than apply the model in a typical zero-shot or few-shot fashion, we treat the model as the basis for labeling functions in a weak supervision framework. To create a classifier, we first prompt the model to answer multiple distinct queries about an example and define how the possible responses should be mapped to votes for labels and abstentions. We then denoise these noisy label sources using the Snorkel system and train an end classifier with the resulting training data. Our experimental evaluation shows that prompting large language models within a weak supervision framework can provide significant gains in accuracy. On the WRENCH weak supervision benchmark, this approach can significantly improve over zero-shot performance, an average 19.5% reduction in errors. We also find that this approach produces classifiers with comparable or superior accuracy to those trained from hand-engineered rules.

Adapting a pre-trained foundation model on downstream tasks should ensure robustness against distribution shifts without the need to retrain the whole model. Although existing weight interpolation methods are simple yet effective, we argue their static nature limits downstream performance while achieving efficiency. In this work, we propose DaWin, a training-free dynamic weight interpolation method that leverages the entropy of individual models over each unlabeled test sample to assess model expertise, and compute per-sample interpolation coefficients dynamically. Unlike previous works that typically rely on additional training to learn such coefficients, our approach requires no training. Then, we propose a mixture modeling approach that greatly reduces inference overhead raised by dynamic interpolation. We validate DaWin on the large-scale visual recognition benchmarks, spanning 14 tasks across robust fine-tuning -- ImageNet and derived five distribution shift benchmarks -- and multi-task learning with eight classification tasks. Results demonstrate that DaWin achieves significant performance gain in considered settings, with minimal computational overhead. We further discuss DaWin's analytic behavior to explain its empirical success.

In this paper, we address force-aware control and force distribution in robotic platforms with multi-fingered hands. Given a target goal and force estimates from tactile sensors, we design a controller that adapts the motion of the torso, arm, wrist, and fingers, redistributing forces to maintain stable contact with objects of varying mass distribution or unstable contacts. To estimate forces, we collect a dataset of tactile signals and ground-truth force measurements using five Xela magnetic sensors interacting with indenters, and train force estimators. We then introduce a model-based control scheme that minimizes the distance between the Center of Pressure (CoP) and the centroid of the fingertips contact polygon. Since our method relies on estimated forces rather than raw tactile signals, it has the potential to be applied to any sensor capable of force estimation. We validate our framework on a balancing task with five objects, achieving a 82.7% success rate, and further evaluate it in multi-object scenarios, achieving 80% accuracy. Code and data can be found here https://github.com/hsp-iit/multifingered-force-aware-control.

Neural simulators promise efficient surrogates for physics simulation, but scaling them is bottlenecked by the prohibitive cost of generating high-fidelity training data. Pre-training on abundant off-the-shelf geometries offers a natural alternative, yet faces a fundamental gap: supervision on static geometry alone ignores dynamics and can lead to negative transfer on physics tasks. We present GeoPT, a unified pre-trained model for general physics simulation based on lifted geometric pre-training. The core idea is to augment geometry with synthetic dynamics, enabling dynamics-aware self-supervision without physics labels. Pre-trained on over one million samples, GeoPT consistently improves industrial-fidelity benchmarks spanning fluid mechanics for cars, aircraft, and ships, and solid mechanics in crash simulation, reducing labeled data requirements by 20-60% and accelerating convergence by 2times. These results show that lifting with synthetic dynamics bridges the geometry-physics gap, unlocking a scalable path for neural simulation and potentially beyond. Code is available at https://github.com/Physics-Scaling/GeoPT.

Rigging and skinning are essential steps to create realistic 3D animations, often requiring significant expertise and manual effort. Traditional attempts at automating these processes rely heavily on geometric heuristics and often struggle with objects of complex geometry. Recent data-driven approaches show potential for better generality, but are often constrained by limited training data. We present the Anymate Dataset, a large-scale dataset of 230K 3D assets paired with expert-crafted rigging and skinning information -- 70 times larger than existing datasets. Using this dataset, we propose a learning-based auto-rigging framework with three sequential modules for joint, connectivity, and skinning weight prediction. We systematically design and experiment with various architectures as baselines for each module and conduct comprehensive evaluations on our dataset to compare their performance. Our models significantly outperform existing methods, providing a foundation for comparing future methods in automated rigging and skinning. Code and dataset can be found at https://anymate3d.github.io/.

Expert demonstrations show how to complete contact-rich tasks, but provide limited coverage of how interaction forces respond to different actions. Task-agnostic play provides broader experience of contact dynamics without specifying task goals. To fully leverage these two types of data, we introduce ForceWAM, a force world action model that decouples knowledge of task-compatible interaction outcomes from knowledge of how local actions change contact. A world model learns from successful demonstrations to jointly predict future video and six-axis force/torque trajectories. Together, these futures describe the expected evolution of motion and contact during the task. A separate inverse dynamics model (IDM) learns from both task and play, mapping current observations and recorded visual-wrench futures to their associated robot actions. Play data thus provide knowledge of force responses for goal-directed execution. At deployment, the IDM reactively translates generated futures into actions, reusing them with fresh wrench feedback between world-model updates. Across real-robot force-regulated sliding, box flipping with and without disturbances, and ring placement, ForceWAM achieves 85-95% mean success, surpassing world-modeling and reactive baselines. Our experiments further show that adding task-agnostic play data improves success by 15-45 percentage points, demonstrating its value for learning contact-rich execution. Project page and code are available at https://force-wam.github.io/.

Autonomous robots can increase uptime and reduce human exposure in Big Science facilities, but strong magnetic fields needed for their operation corrupt sensors and induce pose-dependent mechanical wrenches that destabilize robots and challenge conventional reactive controllers. This paper presents a control framework for modeling, estimating, and dynamically compensating for spatially varying magnetic wrenches acting on legged robots to improve robustness in these fields. We introduce a custom physics plugin for the MuJoCo simulator to model magnetic forces on rigid-body elements, alongside an inverse field-estimation framework to infer the latent magnetic field directly from quadruped dynamic responses and any number of sensor readings. Furthermore, we develop a Magnet-Aware Model Predictive Control (MPC) and Whole-Body Control (WBC) architecture that predicts and counteracts magnetic perturbations during locomotion to increase the range of magnetic fields in which the robot can operate. The effectiveness of the framework is validated through both simulation and physical hardware experiments. We show our method increases the the maximum rejectable disturbances from magnetic field in the force space by a factor of 2.5 and and between 1.6-2 times in torque space compared to a non-compensated system. Within the proposed magnetic field, this constitutes an increase in the area in which the robot can operate by 29,34% of which 10,84% would have previously caused an immediate collapse to non-compensated controllers.

Large language models are increasingly deployed as agents that solve tasks by interacting with external tool environments. Although recent tool-use benchmarks increasingly cover complex task settings, they still largely assume clean, stable, and trustworthy tool environments, leaving tool-environment unreliability insufficiently examined. We introduce ToolBench-X, a benchmark for evaluating agents under recoverable reliability hazards. ToolBench-X contains executable multi-step tasks across diverse domains and sequential, parallel, and mixed workflows, each paired with deterministic tools and a canonical final answer for automatic evaluation. Starting from clean tool environments, ToolBench-X injects five structured hazard types: Specification Drift, Invocation Error, Execution Failure, Output Drift, and Cross-source Conflict. Crucially, each injected instance remains solvable through at least one valid recovery path, such as retrying, fallback, verification, or cross-checking. Experiments reveal a substantial reliability gap: agents that perform well with reliable tools often fail under recoverable hazards. Further analysis shows that failures are driven less by tool-use volume or inference budget than by limited hazard diagnosis and ineffective recovery. Targeted recovery hints recover many failed tasks, while test-time scaling yields more limited gains. These results suggest that tool-use evaluation should move beyond function-call accuracy toward task completion under unreliable tool environments. The code and data is available at https://github.com/Foreverskyou/ToolBench-X.

Contact-rich policies often fail because distinct physical states look alike yet require different actions. Cameras may not reveal whether a connector is aligned or fully seated, while many normal-only tactile sensors can miss the tangential interactions perpendicular to the grasping direction that distinguish these states. We ask whether a learning policy needs calibrated shear measurements, or only a repeatable observation that separates shear-dependent contact states. We introduce TacGooseBumps (TacGB), a passive domed film that mechanically encodes tangential loading as pattern changes in an existing sensor's pressure map. Tangential loading tilts each dome and redistributes pressure across its footprint; an end-to-end policy consumes the resulting maps without added electronics, force reconstruction, or taxel-level dome alignment. Across four imitation-learning tasks and two data-collection pipelines, TacGB improves goal attainment, efficiency, and contact quality: insertion success increases by up to 36 percentage points, and successful insertions are completed faster, while fragile-object placement becomes gentler and drawing becomes more continuous and straight. Signal, stage-wise, failure-mode, and trajectory analyses link these gains to contact regimes in which task-relevant tangential interactions are poorly resolved by vision and normal pressure alone. Together, these results show that shear need not be measured metrically to benefit robot learning; it can instead be mechanically encoded without changing the underlying tactile sensor or the policy's pressure-map input format.

Contact-rich manipulation tasks with stiff frictional elements like connector insertion are difficult to model with rigid-body simulators. In this work, we propose a new approach for modeling these environments by learning a quasi-static contact force model instead of a full simulator. Using a feature vector that contains information about the configuration and control, we find a linear mapping adequately captures the relationship between this feature vector and the sensed contact forces. A novel Linear Model Learning (LML) algorithm is used to solve for the globally optimal mapping in real time without any matrix inversions, resulting in an algorithm that runs in nearly constant time on a GPU as the model size increases. We validate the proposed approach for connector insertion both in simulation and hardware experiments, where the learned model is combined with an optimization-based controller to achieve smooth insertions in the presence of misalignments and uncertainty. Our website featuring videos, code, and more materials is available at https://model-based-plugging.github.io/.

We introduce Yielding Universal Bidigital Interface (YUBI), a finger-aligned gripper designed to enable intuitive, ergonomic, and scalable data collection for bimanual dexterous manipulation. While handheld data collection systems such as Universal Manipulation Interface (UMI) enable affordable data collection, their bulky pistol-grip designs can pose ergonomic and usability challenges for fine-grained, dexterous manipulation tasks. To address this, YUBI presents a distinct design principle: yielding, finger-driven actuation that directly maps human finger movements to gripper jaw motion. Using the YUBI devices, we set up a data collection system with integrated VR-based 6 DoF tracking of the gripper, ensuring high-fidelity trajectory data acquisition. We curate a UMI-based dataset of unprecedented scale: 8,434 hours across 1.20M episodes and 119 tasks. Experiments show that YUBI offers advantages over the UMI gripper in versatility for complex bimanual tasks, dexterity, and operational efficiency. A single policy trained on the YUBI dataset transfers across multiple bimanual robots (UR, Franka, and ELEY) simply by mounting the gripper on each platform, confirming that the collected data are directly executable as policy supervision. We release the gripper hardware, data-collection software, and dataset as one integrated stack, offering the open community a reproducible path to large-scale data acquisition for advancing robotic foundation models.

The ability of Large Language Models (LLMs) to use external tools unlocks powerful real-world interactions, making rigorous evaluation essential. However, current benchmarks primarily report final accuracy, revealing what models can do but obscuring the cognitive bottlenecks that define their true capability boundaries. To move from simple performance scoring to a diagnostic tool, we introduce a framework grounded in Cognitive Load Theory. Our framework deconstructs task complexity into two quantifiable components: Intrinsic Load, the inherent structural complexity of the solution path, formalized with a novel Tool Interaction Graph; and Extraneous Load, the difficulty arising from ambiguous task presentation. To enable controlled experiments, we construct ToolLoad-Bench, the first benchmark with parametrically adjustable cognitive load. Our evaluation reveals distinct performance cliffs as cognitive load increases, allowing us to precisely map each model's capability boundary. We validate that our framework's predictions are highly calibrated with empirical results, establishing a principled methodology for understanding an agent's limits and a practical foundation for building more efficient systems.

Rising maintenance costs of ageing infrastructure necessitate innovative monitoring techniques. This paper presents a new approach for axle detection, enabling real-time application of Bridge Weigh-In-Motion (BWIM) systems without dedicated axle detectors. The proposed method adapts the Virtual Axle Detector (VAD) model to handle raw acceleration data, which allows the receptive field to be increased. The proposed Virtual Axle Detector with Enhanced Receptive field (VADER) improves the \(F_1\) score by 73\% and spatial accuracy by 39\%, while cutting computational and memory costs by 99\% compared to the state-of-the-art VAD. VADER reaches a \(F_1\) score of 99.4\% and a spatial error of 4.13~cm when using a representative training set and functional sensors. We also introduce a novel receptive field (RF) rule for an object-size driven design of Convolutional Neural Network (CNN) architectures. Based on this rule, our results suggest that models using raw data could achieve better performance than those using spectrograms, offering a compelling reason to consider raw data as input.

Exploitation is not a binary event. It is a ladder of acquiring progressive capabilities, from executing a single buggy line of code to taking full control of the target. However, existing LLM security benchmarks treat a crash as exploitation success. That single binary outcome collapses the hard parts of exploitation: the transition from triggering a bug to constructing reusable primitives and control. We present ExploitBench, a capability-graded benchmark that decomposes exploitation into 16 measurable flags, from coverage and crash through sandbox primitives, arbitrary read/write, control-flow hijack, and arbitrary code execution. Each capability is verified by a deterministic oracle that uses a per-run randomized challenge-response for primitives, differential execution against ground-truth binaries to measure progress, and a signal-handler proof for code execution. We instantiate ExploitBench on 41 V8 bugs because V8 is both widely deployed and exploitation-hardened. We report three arms: <model,env> as the primary measurement of model-environment capability, <model,env, adaptive coaching> as a secondary arm that adds adaptive coaching to test whether targeted feedback shifts outcomes, and <model,env,harness> as an ablation that swaps in the model's native CLI to check whether vendor-side optimizations increase exploitation capabilities. Our results show a sharp capability split between publicly deployed frontier models and the private frontier. Across the 8 publicly deployed models tested, reaching the vulnerable code and triggering a crash is routine, but arbitrary code execution is not. The private model shows arbitrary code execution on approximately half. Overall, results suggest that exploit construction against hardened targets is an emerging frontier capability.

We release Terminal Wrench, a subset of 331 terminal-agent benchmark environments, copied from the popular open benchmarks that are demonstrably reward-hackable. The data set includes 3,632 hack trajectories and 2,352 legitimate baseline trajectories across three frontier models (Claude Opus 4.6, Gemini 3.1 Pro, GPT-5.4). Each entry preserves the original task definition alongside full attack trajectories that show how the verifier was bypassed. It also includes cases where the task was not solved as intended. The tasks span system administration, machine learning, software engineering, and security challenges; the exploits range from simple output spoofing to stack-frame introspection, standard-library patching, and rootkit-style binary hijacking. Crucially, these exploits are specific to each task, rather than the evaluation harness, making them harder to patch. We also present a monitorability study in which hack trajectories are sanitized or stripped of reasoning traces and then scored by an LLM judge, showing that detection degrades meaningfully when chain-of-thought is removed (AUC drops from 0.97 to 0.92). The data set is publicly available at https://github.com/few-sh/terminal-wrench.

Dexterous interaction with articulated objects is important for household, assistive, and humanoid manipulation, where multi-finger hands can provide compliant contact patterns beyond parallel-jaw grasping. However, articulated-object manipulation differs from static-object manipulation: the target part cannot be directly actuated, and its motion must emerge through sustained physical hand--handle contact. This makes the transition from object-centric articulated generation to hand-driven dexterous hand--object interaction non-trivial, since geometric trajectory replay or open-loop execution does not model the contact dynamics required to move the articulated part. Moreover, policies trained only for task completion under fixed dynamics can overfit nominal contact loads, especially without tactile or force feedback, and may degrade when the contact load changes. To address these challenges, we present DragMesh-2, a contact-driven framework for dexterous interaction with articulated objects that extends articulated interaction from object-centric generation to hand-driven dexterous hand--object interaction, where articulated motion must arise through physical contact. We further propose PICA, a physically informed contact-aware training mechanism that injects physical signals into policy learning without tactile or force feedback, improving robustness and task success under changing contact loads. Finally, we conduct systematic evaluation across multiple damping conditions and articulated-object categories to study robustness under contact-load variation, and provide a pure-geometry dexterous interaction resource to support future loco-manipulation and humanoid hand--object interaction research. Across seven GAPartNet objects, DragMesh-2 achieves stronger robustness under contact-load variation than the compared methods while maintaining high task success across damping conditions.

We propose a reduced-space elasto-dynamic solver that is well suited for augmenting rigged character animations with secondary motion. At the core of our method is a novel deformation subspace based on Linear Blend Skinning that overcomes many of the shortcomings prior subspace methods face. Our skinning subspace is parameterized entirely by a set of scalar weights, which we can obtain through a small, material-aware and rig-sensitive generalized eigenvalue problem. The resulting subspace can easily capture rotational motion and guarantees that the resulting simulation is rotation equivariant. We further propose a simple local-global solver for linear co-rotational elasticity and propose a clustering method to aggregate per-tetrahedra non-linear energetic quantities. The result is a compact simulation that is fully decoupled from the complexity of the mesh.

This paper introduces Amazon Robotic Manipulation Benchmark (ARMBench), a large-scale, object-centric benchmark dataset for robotic manipulation in the context of a warehouse. Automation of operations in modern warehouses requires a robotic manipulator to deal with a wide variety of objects, unstructured storage, and dynamically changing inventory. Such settings pose challenges in perceiving the identity, physical characteristics, and state of objects during manipulation. Existing datasets for robotic manipulation consider a limited set of objects or utilize 3D models to generate synthetic scenes with limitation in capturing the variety of object properties, clutter, and interactions. We present a large-scale dataset collected in an Amazon warehouse using a robotic manipulator performing object singulation from containers with heterogeneous contents. ARMBench contains images, videos, and metadata that corresponds to 235K+ pick-and-place activities on 190K+ unique objects. The data is captured at different stages of manipulation, i.e., pre-pick, during transfer, and after placement. Benchmark tasks are proposed by virtue of high-quality annotations and baseline performance evaluation are presented on three visual perception challenges, namely 1) object segmentation in clutter, 2) object identification, and 3) defect detection. ARMBench can be accessed at http://armbench.com

Open time-series forecasting (TSF) benchmarks cover retail, energy, weather, and traffic, but supply-chain logistics remains underserved. We introduce ISOMORPH, the first public digital twin of a multi-echelon logistics network with fully interpretable, user-configurable parameters and modular topology, demand process, and control rules. The simulator advances a directed routing graph in discrete time: demand arrives at the destination, is served from stock or recorded as backlog, and triggers replenishment through the network. The state vector tracks per-node on-hand inventory with outstanding orders, in-transit shipments, and a smoothed demand estimate, so the dynamics close as a Markov chain on a tractable state space whose transition kernel acts linearly on the empirical distribution of the state. The released data reproduces the bullwhip effect at empirically consistent magnitudes, and three conservation laws encoded in the Markov chain serve as verification tools when users extend the simulator. We release datasets at two catalogue scales (C=50 and C=200) with six scenario sweeps producing 30 additional rollouts and 20 Latin-hypercube perturbations, exhibiting dynamics absent from fixed TSF benchmarks: variance amplification, cascading bottlenecks, regime shifts, and cross-channel coupling through shared macro shocks. Zero-shot evaluation of four foundation models (Chronos, Moirai, TimesFM, Lag-Llama) shows MASE values exceeding public GIFT-Eval references at low-to-moderate horizons, supporting incorporation into existing benchmarks. The same pairing produces forecast confidence bands via Latin-hypercube perturbation of demand-side knobs, forward UQ from parameter uncertainty unavailable on standard TSF datasets, demonstrating that foundation models can serve as fast surrogates for the digital twin's forward UQ. Code (MIT): https://github.com/tuhinsahai/ISOMORPH.

We introduce a novel dataset designed to benchmark the physical and spatial reasoning capabilities of Large Language Models (LLM) based on topology optimization, a method for computing optimal material distributions within a design space under prescribed loads and supports. In this dataset, LLMs are provided with conditions such as 2D boundary, applied forces and supports, and must reason about the resulting optimal material distribution. The dataset includes a variety of tasks, ranging from filling in masked regions within partial structures to predicting complete material distributions. Solving these tasks requires understanding the flow of forces and the required material distribution under given constraints, without access to simulation tools or explicit physical models, challenging models to reason about structural stability and spatial organization. Our dataset targets the evaluation of spatial and physical reasoning abilities in 2D settings, offering a complementary perspective to traditional language and logic benchmarks.

Robust routing under uncertainty is central to real-world logistics, yet most benchmarks assume static, idealized settings. We present SVRPBench, the first open benchmark to capture high-fidelity stochastic dynamics in vehicle routing at urban scale. Spanning more than 500 instances with up to 1000 customers, it simulates realistic delivery conditions: time-dependent congestion, log-normal delays, probabilistic accidents, and empirically grounded time windows for residential and commercial clients. Our pipeline generates diverse, constraint-rich scenarios, including multi-depot and multi-vehicle setups. Benchmarking reveals that state-of-the-art RL solvers like POMO and AM degrade by over 20% under distributional shift, while classical and metaheuristic methods remain robust. To enable reproducible research, we release the dataset and evaluation suite. SVRPBench challenges the community to design solvers that generalize beyond synthetic assumptions and adapt to real-world uncertainty.

Assembling objects from parts requires understanding multimodal instructions, linking them to 3D components, and predicting physically plausible 6-DoF motions for each assembly step. Existing datasets focus on simplified scenarios, overlooking shape complexities and assembly trajectories in industrial assemblies. We introduce AssemblyBench, a synthetic dataset of 2,789 industrial objects with multimodal instruction manuals, corresponding 3D part models, and part assembly trajectories. We also propose a transformer-based model, AssemblyDyno, which uses the instructional manual and the 3D shape of each part to jointly predict assembly order and part assembly trajectories. AssemblyDyno outperforms prior works in both assembly pose estimation and trajectory feasibility, where the latter is evaluated by our physics-based simulations.

Most learned dexterous grasp generators relegate contact forces to a downstream verification step, so a kinematically-plausible pose can still violate the conditions for a stable physical grasp. We address this with EquiDexFlow, an SE(3)-equivariant flow-matching model that jointly predicts wrist pose, joint angles, fingertip contacts, surface normals, and contact forces from an object point cloud. Our architecture projects contacts onto the object surface and forces into the Coulomb friction cone by construction, so placement and friction compliance hold without loss penalties. We prove end-to-end SE(3) equivariance and verify it empirically over 200 rotations, with wrist residuals below 0.04^circ and exactly zero joint deviation. Trained on 8,100 force-closure grasps across 81 objects for the 16-DoF Allegro Hand, our model achieves zero friction violations, the best composite score, and the lowest wrench residual among all ablation variants. We retarget decoded fingertip contacts to a 16-DoF LEAP Hand via per-finger inverse kinematics, and our hardware-feasible refinement places every joint at least 5% inside its actuator envelope while preserving wrench balance. On the physical robot, retargeted EquiDexFlow-decoded grasps complete open-loop pick-and-hold trials on all six test objects, with every asymmetric object succeeding at both the canonical pose and a 120^circ co-rotation. Videos, code, and checkpoints are available at https://equidexflow.github.io.

Reinforcement learning (RL) has become a key paradigm for training software engineering (SWE) agents, but existing pipelines typically rely on per-task containers for isolation. At scale, pre-built container images incur substantial storage overhead, slow environment setup, and require container-management privileges. We propose SWE-MiniSandbox, a lightweight, container-free method that enables scalable RL training of SWE agents without sacrificing isolation. Instead of relying on per-instance containers, SWE-MiniSandbox executes each task in an isolated workspace backed by kernel-level mechanisms, substantially reducing system overhead. It leverages lightweight environment pre-caching techniques to eliminate the need for bulky container images. As a result, our approach lowers disk usage to approximately 5\% of that required by container-based pipelines and reduces environment preparation time to about 25\% of the container baseline. Empirical results demonstrate that SWE-MiniSandbox achieves evaluation performance comparable to standard container-based pipelines. By removing the dependency on heavy container infrastructure, SWE-MiniSandbox offers a practical and accessible foundation for scaling RL-based SWE agents, particularly in resource-constrained research environments.

Large-scale agentic training and evaluation with large language models (LLMs) rely on isolated, stateful execution environments in which models inspect repositories, invoke tools, execute commands, and interact with task-specific services. These workloads create sandboxes in large bursts, span heterogeneous functionality and isolation requirements, retain state across long interactions, and draw from large image corpora with limited reuse. Supporting them therefore requires an elastic execution platform rather than a single sandbox runtime. This report presents DeepSeek Elastic Compute (DSec), a production sandbox platform that exposes FnCall, container, microVM, and full-VM sandbox backends through a unified SDK. DSec coordinates placement and lifecycle management across the cluster, composes environments from independently versioned layers, combines memory sharing, reclamation, and CPU scheduling for high-density execution, and loads image data on demand from Fire-Flyer File System (3FS), a cluster-wide distributed filesystem. DSec is co-designed with the reinforcement learning (RL) framework, decouples stateful rollout execution from preemptible GPU training, coordinates sandbox lifecycle with training to preserve rollout state while reclaiming idle resources, and mitigates agent misbehavior such as reward hacking. A single production-scale unit of DSec spans around 160 nodes, serving about 3 million sandboxes per day; in production, it supports over 380,000 concurrent sandboxes and sustains over 5,000 sandbox creations per second. Our evaluation and deployment experience show that these mechanisms reduce environment setup and image-distribution overhead, improve memory efficiency, and preserve latency-sensitive performance under high-density overcommit.

Model hosting hubs (e.g., Hugging Face) are vulnerable to supply chain attacks that enable remote code execution on trusted user environments. Attackers often distribute malicious Pre-trained ML models (PTMs) via model hubs. In this paper, we present novel attacks against PTMs and model hubs called SHADOWPICKLE. SHADOWPICKLE includes three (3) stealthy pickle deserialization attacks that enable malicious behaviors and evade state-of-the-art (SOTA) model scanners. These attacks leverage the external module import mechanism of the Pickle Virtual Machine (VM) to execute malicious payloads during deserialization. Additionally, we provide PICKLEBENCH, a dynamic and extensible benchmark for automatically injecting SHADOWPICKLE into arbitrary benign PTM models. Our evaluation shows that SHADOWPICKLE evades ten SOTA scanners, and four model hubs. SHADOWPICKLE (Overwritten) has a 63% evasion rate across scanners, and up to 50% higher evasion rates than existing attacks. Besides, PICKLEBENCH is up to 25.6% more challenging than three SOTA benchmarks. Finally, we provide security recommendations for mitigating our attacks and improving the effectiveness of existing scanners. Our findings highlight the limitations of existing PTM scanners and suggest directions for improvements.

Autonomous wire harness assembly requires robots to manipulate complex branched cables with high precision and reliability. A key challenge in automating this process is predicting how these flexible and branched structures behave under manipulation. Without accurate predictions, it is difficult for robots to reliably plan or execute assembly operations. While existing research has made progress in modeling single-threaded Deformable Linear Objects (DLOs), extending these approaches to Branched Deformable Linear Objects (BDLOs) presents fundamental challenges. The junction points in BDLOs create complex force interactions and strain propagation patterns that cannot be adequately captured by simply connecting multiple single-DLO models. To address these challenges, this paper presents Differentiable discrete branched Elastic rods for modeling Furcated DLOs in real-Time (DEFT), a novel framework that combines a differentiable physics-based model with a learning framework to: 1) accurately model BDLO dynamics, including dynamic propagation at junction points and grasping in the middle of a BDLO, 2) achieve efficient computation for real-time inference, and 3) enable planning to demonstrate dexterous BDLO manipulation. A comprehensive series of real-world experiments demonstrates DEFT's efficacy in terms of accuracy, computational speed, and generalizability compared to state-of-the-art alternatives. Project page:https://roahmlab.github.io/DEFT/.

Crash simulation is a cornerstone of modern vehicle development because it reduces the need for costly physical prototypes, accelerates safety-driven design iteration, and increasingly supports virtual testing workflows. At the same time, modeling structural crash mechanics remains exceptionally challenging: the response is governed by nonlinear contact, large deformation, material plasticity, failure, and complex multi-body interactions evolving over space and time on high-resolution finite-element meshes. In this work, we introduce CarCrashNet, a public high-fidelity open-source benchmark for data-driven structural crash simulation. CarCrashNet combines component-scale and full-vehicle simulations in a multi-modal format, including more than 14{,}000 bumper-beam pole-impact simulations with varying geometry, materials, and boundary conditions, together with 825 full-vehicle crash simulations built from three industry-standard vehicle models of increasing structural complexity: Dodge Neon, Toyota Yaris, and Chevrolet Silverado. To establish the reliability of the benchmark, we validate our open-source finite-element workflow based on OpenRadioss against both experimental crash data and the commercial solver Ansys LS-DYNA. We also introduce CrashSolver, a machine-learning model designed for full-vehicle crash prediction from high-resolution finite-element crash data. We further perform extensive benchmarking across the released datasets and evaluate CrashSolver against state-of-the-art geometric deep learning and transformer-based neural solvers. Our results position CarCrashNet as a foundation for reproducible research in structural simulation, crashworthiness modeling, and AI-driven virtual crash testing. The dataset is available at https://github.com/Mohamedelrefaie/CarCrashNet.

Parametric retrieval enables LLMs to retrieve tools implicitly by assigning each API a unique virtual token and training the model to generate it via constrained beam search. Toolsense shows that this regime has two critical drawbacks: it destroys parametric tool knowledge during training, and its beam-search decoding is too slow for real-time deployment. We introduce TRACE (Tool Retrieval via Augmented Chain-of-thought and Enterprise rules), a two-stage curriculum that resolves this dissociation. Stage 1 reuses the multi-format memorization SFT from ToolSense to seed tool knowledge with LoRA. Stage 2 is our core contribution: the model is trained to emit a thinking trace before producing a JSON list of tool tokens, using two data sources -- RRB pairs from ToolSense and queries synthesized to target business rules curated by domain experts -- both augmented with reasoning traces. This training objective preserves Stage 1 MCQ and QA probing accuracy while enabling single-beam greedy decoding at production latency. Evaluated on a combined enterprise catalog of 8,300+ tools across two enterprise product lines, TRACE training for Stage 2 not only preserves but improves tool understanding: MCQ accuracy gains +3.2 pp and QA probing gains +9 pp over Stage 1. On retrieval, TRACE achieves ~86% recall on Domain A and ~60% on Domain B -- compared to embedding baseline performance of ~27% & ~52% -- both with single-beam greedy decoding, making it directly deployable at production latency.

Addressing a structural-engineering request requires more than a single answer; it requires a chain of interdependent artifacts: interpreted requirements, a computable model, validation records, solver outputs, code-check records, and a final report. Evaluations centered on question answering or script generation rarely verify this complete evidence chain and may therefore reward fluent outputs even when the underlying engineering workflow is incomplete, internally inconsistent, or non-executable. To address this limitation, we present StructureClaw, an artifact-centered workbench in which LLM agents operate through governed engineering skills, typed tools, shared artifact state, and local analysis backends. We also introduce StructureClaw-Bench, an executable benchmark of 150 controlled scenarios spanning standard workflow execution, interactive robustness, and multimodal structural-model reconstruction. A scenario succeeds only when all required artifact- and execution-level assertions pass in a single run. Across ten agent-model configurations, each evaluated on the same 50 standard cases, the average Success Rate rises from 56.8% with the generic-skill baseline to 88.6% with the full automatic workflow. The interactive and multimodal evaluations identify two prominent remaining challenges: safe handling of invalid numerical inputs and fixture-consistent reconstruction of structural models. These findings show that artifact-centered evaluation can expose workflow-level failures that are difficult to identify from final responses alone, providing a more rigorous basis for evaluating and improving structural-engineering agents. The code and benchmark are available at https://github.com/structureclaw/structureclaw.

This study addresses challenges in reverse logistics, a frequently overlooked but essential component of last-mile delivery, particularly in disaster relief scenarios where infrastructure disruptions demand adaptive solutions. While hub-and-spoke logistics networks excel at long-distance scalability, they often fail to optimize closely spaced spokes reliant on distant hubs, introducing inefficiencies in transit times and resource allocation. Using 20 Apple AirTags embedded in packages, this research provides empirical insights into logistical flows, capturing granular spatial and temporal data through Bluetooth LE (BLE) 5 trackers integrated with the Apple Find My network. These trackers demonstrated their value in monitoring dynamic cargo movements, enabling real-time adjustments in mobile hub placement and route optimization, particularly in disaster relief contexts like Hurricane Helene. A novel application of discrete event simulation (DES) further explored the saddle point in hub-spoke configurations, where excessive hub reliance clashes with diminishing spoke interaction demand. By coupling simulation results with empirical AirTag tracking, the study highlights the potential of BLE technology to refine reverse logistics, reduce delays, and improve operational flexibility in both routine and crisis-driven delivery networks.

This paper introduces YOLOv8-TO, a novel approach for reverse engineering of topology-optimized structures into interpretable geometric parameters using the YOLOv8 instance segmentation model. Density-based topology optimization methods require post-processing to convert the optimal density distribution into a parametric representation for design exploration and integration with CAD tools. Traditional methods such as skeletonization struggle with complex geometries and require manual intervention. YOLOv8-TO addresses these challenges by training a custom YOLOv8 model to automatically detect and reconstruct structural components from binary density distributions. The model is trained on a diverse dataset of both optimized and random structures generated using the Moving Morphable Components method. A custom reconstruction loss function based on the dice coefficient of the predicted geometry is used to train the new regression head of the model via self-supervised learning. The method is evaluated on test sets generated from different topology optimization methods, including out-of-distribution samples, and compared against a skeletonization approach. Results show that YOLOv8-TO significantly outperforms skeletonization in reconstructing visually and structurally similar designs. The method showcases an average improvement of 13.84% in the Dice coefficient, with peak enhancements reaching 20.78%. The method demonstrates good generalization to complex geometries and fast inference times, making it suitable for integration into design workflows using regular workstations. Limitations include the sensitivity to non-max suppression thresholds. YOLOv8-TO represents a significant advancement in topology optimization post-processing, enabling efficient and accurate reverse engineering of optimized structures for design exploration and manufacturing.

Large language models (LLMs) have revolutionized numerous applications, yet their deployment remains challenged by memory constraints on local devices. While scaling laws have enhanced LLM capabilities, the primary bottleneck has shifted from capability to availability, emphasizing the need for efficient memory management. Traditional compression methods, such as quantization, often require predefined compression ratios and separate compression processes for each setting, complicating deployment in variable memory environments. In this paper, we introduce BitStack, a novel, training-free weight compression approach that enables megabyte-level trade-offs between memory usage and model performance. By leveraging weight decomposition, BitStack can dynamically adjust the model size with minimal transmission between running memory and storage devices. Our approach iteratively decomposes weight matrices while considering the significance of each parameter, resulting in an approximately 1-bit per parameter residual block in each decomposition iteration. These blocks are sorted and stacked in storage as basic transmission units, with different quantities loaded based on current memory availability. Extensive experiments across a wide range of tasks demonstrate that, despite offering fine-grained size control, BitStack consistently matches or surpasses strong quantization baselines, particularly at extreme compression ratios. To the best of our knowledge, this is the first decomposition-based method that effectively bridges the gap to practical compression techniques like quantization. Code is available at https://github.com/xinghaow99/BitStack.

In agentic scientific machine learning (SciML), large language model (LLM) agents can discover surrogate models and select one by an automated score, typically an error metric. A low error, however, does not establish that the predicted fields satisfy the physics that matter for mechanics, such as boundary conditions, superposition, stiffness scaling, or causality. We introduce Physics-Audited Agentic SciML (PA-SciML), a verification-first workflow for agentic SciML discovery. The workflow fixes a scoring evaluator before search, derives reviewable machine-checkable physics requirements, checks each trained candidate on its outputs, and separately searches prescribed input ranges or measured load-history spans for high-violation cases without reference solution fields. A surrogate is reported as verified only under the stated checks. When enabled, the workflow also adds advisory numerical probes before training and tests one modeling change at a time to record which isolated edits are associated with score gains before reuse. In the reported computational-solid-mechanics numerical examples, the static elasticity run selects a surrogate with lower validation error than the error-only baseline while both selected models pass the common linear-elastic checks. In the transient elastodynamics run, an error-only baseline with similar mean error fails a stricter causality check by responding to future parts of the loading history, while the selected surrogate passes the stated checks. The main distinction is per-candidate physics evidence on predicted fields, not a richer aggregate score.

Turning garments right-side out is a challenging manipulation task: it is highly dynamic, entails rapid contact changes, and is subject to severe visual occlusion. We introduce Right-Side-Out, a zero-shot sim-to-real framework that effectively solves this challenge by exploiting task structures. We decompose the task into Drag/Fling to create and stabilize an access opening, followed by Insert&Pull to invert the garment. Each step uses a depth-inferred, keypoint-parameterized bimanual primitive that sharply reduces the action space while preserving robustness. Efficient data generation is enabled by our custom-built, high-fidelity, GPU-parallel Material Point Method (MPM) simulator that models thin-shell deformation and provides robust and efficient contact handling for batched rollouts. Built on the simulator, our fully automated pipeline scales data generation by randomizing garment geometry, material parameters, and viewpoints, producing depth, masks, and per-primitive keypoint labels without any human annotations. With a single depth camera, policies trained entirely in simulation deploy zero-shot on real hardware, achieving up to 81.3% success rate. By employing task decomposition and high fidelity simulation, our framework enables tackling highly dynamic, severely occluded tasks without laborious human demonstrations.

Robotics and automation are increasingly influential in logistics but remain largely confined to traditional warehouses. In grocery retail, advancements such as cashier-less supermarkets exist, yet customers still manually pick and pack groceries. While there has been a substantial focus in robotics on the bin picking problem, the task of packing objects and groceries has remained largely untouched. However, packing grocery items in the right order is crucial for preventing product damage, e.g., heavy objects should not be placed on top of fragile ones. However, the exact criteria for the right packing order are hard to define, in particular given the huge variety of objects typically found in stores. In this paper, we introduce LLM-Pack, a novel approach for grocery packing. LLM-Pack leverages language and vision foundation models for identifying groceries and generating a packing sequence that mimics human packing strategy. LLM-Pack does not require dedicated training to handle new grocery items and its modularity allows easy upgrades of the underlying foundation models. We extensively evaluate our approach to demonstrate its performance. We will make the source code of LLMPack publicly available upon the publication of this manuscript.

Monitoring complex industrial assets relies on engineer-authored symbolic rules that trigger based on sensor conditions and prompt technicians to perform corrective actions. The bottleneck is not detection but response: translating rules into maintenance steps requires asset-specific knowledge gained through years of practice. We investigate whether LLMs can serve as decision support for this rule-to-action step and introduce , a benchmark of 6{,}690 expert-validated multiple-choice questions from 118 rule-action pairs across 16 asset types. We contribute (i) a symbolic-to-MCQA pipeline normalizing rules to Disjunctive Normal Form with embedding-based distractor sampling, (ii) five variants probing distinct failure modes (Pro, Pert, Verbose, Aug, Rationale), and (iii) a benchmark of 29 LLMs and 4 embedding baselines. A human evaluation (9 practitioners, mean 45.0\%) confirms requires specialist knowledge beyond operational experience. Three findings stand out. The frontier has closed: the top three LLMs lie within one Macro point, with Bradley-Terry Elo placing claude-opus-4-6 30 points above the next model. Yet \,Pro exposes brittleness, with every model losing 13--60\% relative accuracy under distractor expansion. \,Aug exposes pattern-matching: under condition inversion, frontier models still select the original answer 49--63\% of the time. The deployment bottleneck is not capability but calibration: frontier models handle template-style fault detection but break under structural perturbation.

Robotic bin packing requires long-horizon sequential decision-making, as each object placement affects the available space for subsequent packing. Existing methods primarily rely on hand-crafted geometric heuristics that optimize predefined objectives or reinforcement learning policies learned through trial and error over predefined training configurations. Despite recent advances in multimodal large language models (MLLMs) for this task, their potential for closed-loop sequential decisions across heterogeneous packing configurations remains underexplored. To address this gap, we introduce PackLab, a comprehensive framework for developing, training, and evaluating MLLMs for closed-loop robotic bin packing. PackLab-Suite provides a physics-based simulation platform for scalable generation of diverse training packing trajectories and evaluation of their physical outcomes. PackLab-VLM is a packing-specialized MLLM that understands the evolving object and container states to jointly select objects and predict placements in a closed-loop manner. PackLab-Bench provides standardized packing scenarios at multiple difficulty levels for systematic evaluation. Extensive experiments demonstrate that, on average, PackLab-VLM outperforms conventional packing heuristics, traditional reinforcement learning methods, and general-purpose MLLMs across object sets and container configurations, highlighting the potential of MLLMs for long-horizon robotic packing. The code, model, dataset, and benchmark are available at https://github.com/Correr-Zhou/PackLab .

We consider the dictionary-based ROM-net (Reduced Order Model) framework [T. Daniel, F. Casenave, N. Akkari, D. Ryckelynck, Model order reduction assisted by deep neural networks (ROM-net), Advanced modeling and Simulation in Engineering Sciences 7 (16), 2020] and summarize the underlying methodologies and their recent improvements. The main contribution of this work is the application of the complete workflow to a real-life industrial model of an elastoviscoplastic high-pressure turbine blade subjected to thermal, centrifugal and pressure loadings, for the quantification of the uncertainty on dual quantities (such as the accumulated plastic strain and the stress tensor), generated by the uncertainty on the temperature loading field. The dictionary-based ROM-net computes predictions of dual quantities of interest for 1008 Monte Carlo draws of the temperature loading field in 2 hours and 48 minutes, which corresponds to a speedup greater than 600 with respect to a reference parallel solver using domain decomposition, with a relative error in the order of 2%. Another contribution of this work consists in the derivation of a meta-model to reconstruct the dual quantities of interest over the complete mesh from their values on the reduced integration points.

Is the standard weight decay in AdamW truly optimal? Although AdamW decouples weight decay from adaptive gradient scaling, a fundamental conflict remains: the Radial Tug-of-War. In deep learning, gradients tend to increase parameter norms to expand effective capacity while steering directions to learn features, whereas weight decay indiscriminately suppresses norm growth. This push--pull interaction induces radial oscillations, injecting noise into Adam's second-moment estimates and potentially degrading delicate tangential feature learning. We argue that magnitude and direction play distinct roles and should be decoupled in optimizer dynamics. We propose Orthogonal Dynamics Decoupling and instantiate it as AdamO: an SGD-style update handles the one-dimensional norm control, while Adam's adaptive preconditioning is confined to the tangential subspace. AdamO further incorporates curvature-adaptive radial step sizing and architecture-aware rules and projections for scale-invariant layers and low-dimensional parameters. Experiments on vision and language tasks show that AdamO improves generalization and stability over AdamW without introducing additional complex constraints.

Safe yet stable grasping requires a robotic hand to apply sufficient force on the object to immobilize it while keeping it from getting damaged. Soft robotic hands have been proposed for safe grasping due to their passive compliance, but even such a hand can crush objects if the applied force is too high. Thus for safe grasping, regulating the grasping force is of uttermost importance even with soft hands. In this work, we present a force controlled soft hand and use it to achieve safe grasping. To this end, resistive force and bend sensors are integrated in a soft hand, and a data-driven calibration method is proposed to estimate contact interaction forces. Given the force readings, the pneumatic pressures are regulated using a proportional-integral controller to achieve desired force. The controller is experimentally evaluated and benchmarked by grasping easily deformable objects such as plastic and paper cups without neither dropping nor deforming them. Together, the results demonstrate that our force controlled soft hand can grasp deformable objects in a safe yet stable manner.

Manipulation of elastoplastic objects like dough often involves topological changes such as splitting and merging. The ability to accurately predict these topological changes that a specific action might incur is critical for planning interactions with elastoplastic objects. We present DoughNet, a Transformer-based architecture for handling these challenges, consisting of two components. First, a denoising autoencoder represents deformable objects of varying topology as sets of latent codes. Second, a visual predictive model performs autoregressive set prediction to determine long-horizon geometrical deformation and topological changes purely in latent space. Given a partial initial state and desired manipulation trajectories, it infers all resulting object geometries and topologies at each step. DoughNet thereby allows to plan robotic manipulation; selecting a suited tool, its pose and opening width to recreate robot- or human-made goals. Our experiments in simulated and real environments show that DoughNet is able to significantly outperform related approaches that consider deformation only as geometrical change.

Tool Calling and Structured Output are two core capabilities of modern Agent systems, yet their interaction under joint deployment conditions remains insufficiently understood. This paper reports a reproducible phenomenon observed in a production Agent system: when Tool Calling and JSON Schema constraints are simultaneously enabled, multiple open-weight models cease invoking tools despite maintaining high schema compliance. We refer to this behavior as Tool Suppression. Through controlled experiments across multiple model families and deployment settings, we consistently reproduce Tool Suppression under joint constraints, while tool execution and schema compliance remain functional when evaluated independently. Further analysis reveals that JSON Schema constraints are compiled into grammar-based token masks, causing tool-call tokens to become unreachable during decoding. This provides an implementation-level explanation for the observed behavior. To interpret the phenomenon, we formulate the Constraint Priority Inversion (CPI) hypothesis, which suggests that schema satisfaction may dominate action-selection behavior under multiple simultaneous constraints. We present CPI as a behavioral hypothesis consistent with the observed evidence rather than a verified internal mechanism. To mitigate the problem, we propose Transparent Two-Pass Execution, an inference-time strategy that decouples tool execution from schema-constrained response generation. Experimental results show that this approach restores tool invocation while preserving structured output guarantees without requiring model retraining. These findings suggest that evaluating tool use and structured output separately may overlook important reliability issues in production Agent systems. Code, data, and docs will be released at https://github.com/Fzsama/Constrain-Tax-26-06.git.

Industrial assembly tasks increasingly demand rapid adaptation to complex procedures and varied components, yet are often conducted in environments with limited computing, connectivity, and strict privacy requirements. These constraints make conventional cloud-based or fully autonomous solutions impractical for factory deployment. This paper introduces a mobile-device-based assistant system for industrial training and operational support, enabling real-time, semi-hands-free interaction through on-device perception and voice interfaces. The system integrates lightweight object detection, speech recognition, and Retrieval-Augmented Generation (RAG) into a modular on-device pipeline that operates entirely on-device, enabling intuitive support for part handling and procedure understanding without relying on manual supervision or cloud services. To enable scalable training, we adopt an automated data construction pipeline and introduce a two-stage refinement strategy to improve visual robustness under domain shift. Experiments on our generated dataset, i.e., Gear8, demonstrate improved robustness to domain shift and common visual corruptions. A structured user study further confirms its practical viability, with positive user feedback on the clarity of the guidance and the quality of the interaction. These results indicate that our framework offers a deployable solution for real-time, privacy-preserving smart assistance in industrial environments. We will release the Gear8 dataset and source code upon acceptance.

Most of the world's offshore wind resource lies in waters too deep for fixed-bottom foundations, making floating offshore wind turbines (FOWTs) essential for deep-water deployment. As the industry scales toward 22 MW class designs, tower fatigue becomes increasingly critical because larger structures amplify the coupled aero-hydro-servo-elastic loads induced by continuous wind and wave excitation. Accurate fatigue-damage prediction is therefore central to certification, design optimization, and cost reduction. Yet the field lacks a shared surrogate benchmark: studies report different simulations, splits, and metrics, making methods difficult to compare. We present FLOATBench, a public tabular benchmark with 582{,}120 per-section fatigue-damage labels across three 22 MW FOWT tower geometries, derived from 19{,}404 high-fidelity OpenFAST simulations across the three towers (6{,}468 per tower: 1{,}078 aligned wind/wave operating points times six turbulence seeds), labeled at 30 cross-sections per tower. FLOATBench includes a regime-aware alpha-shape partition of the joint wind/wave operating envelope, stratifying test points into in-train, interpolation, and extrapolation regimes. It is paired with a reproducible evaluation harness covering three protocol levels: random validation (E1), within-tower regime-aware evaluation (E2), and cross-tower transfer (E3). The regime-aware protocol reveals rank shifts between global and extrapolation performance that random-split leaderboards cannot detect. To the authors' knowledge, FLOATBench is the first FOWT fatigue benchmark for tabular surrogate modeling, and offers an evaluation protocol that generalizes to engineering surrogates defined over physical operating envelopes. Dataset and code available at: https://github.com/Joao97ribeiro/FLOATBench.

We propose a physics-informed machine learning framework called P-DivGNN to reconstruct local stress fields at the micro-scale, in the context of multi-scale simulation given a periodic micro-structure mesh and mean, macro-scale, stress values. This method is based in representing a periodic micro-structure as a graph, combined with a message passing graph neural network. We are able to retrieve local stress field distributions, providing average stress values produced by a mean field reduced order model (ROM) or Finite Element (FE) simulation at the macro-scale. The prediction of local stress fields are of utmost importance considering fracture analysis or the definition of local fatigue criteria. Our model incorporates physical constraints during training to constraint local stress field equilibrium state and employs a periodic graph representation to enforce periodic boundary conditions. The benefits of the proposed physics-informed GNN are evaluated considering linear and non linear hyperelastic responses applied to varying geometries. In the non-linear hyperelastic case, the proposed method achieves significant computational speed-ups compared to FE simulation, making it particularly attractive for large-scale applications.

Low Earth orbit (LEO) satellites increasingly carry compute hardware capable of on-board processing, yet each satellite generates roughly two orders of magnitude more data than it can downlink per orbit. This mismatch forces operators to decide, for every workload, which computation runs on-board and which runs on the ground, how intermediate data crosses the space-ground boundary through narrow contact windows, and how to maintain delivery guarantees over noisy channels. We present Constraint-Aware Execution (CAE), a planning system that takes a satellite identifier, a workload expressed as a directed acyclic graph of processing steps, and a set of orbital and resource constraints, and produces a deterministic, physically grounded execution plan. CAE operates in four phases: (1) orbital environment construction via SGP4 propagation with eclipse detection and ground station pass prediction, (2) compute placement using a cost model that compares on-board resource consumption against transfer overhead, (3) transfer insertion with adaptive forward error correction and security overhead modeling, and (4) greedy first-fit scheduling into orbital windows under power, thermal, compute, and communication constraints. We evaluate CAE against five representative workload patterns across satellites in distinct orbital regimes and demonstrate that the system produces feasible plans in under two seconds, correctly exploits onboard data reduction to minimize transfer volume, and adapts FEC and multi-pass allocation to varying channel conditions. CAE is deployed as a production API computing plans for any cataloged satellite using live two-line element data.

Numerical simulations play a critical role in design and development of engineering products and processes. Traditional computational methods, such as CFD, can provide accurate predictions but are computationally expensive, particularly for complex geometries. Several machine learning (ML) models have been proposed in the literature to significantly reduce computation time while maintaining acceptable accuracy. However, ML models often face limitations in terms of accuracy and scalability and depend on significant mesh downsampling, which can negatively affect prediction accuracy and generalization. In this work, we propose a novel ML model architecture, DoMINO (Decomposable Multi-scale Iterative Neural Operator) developed in NVIDIA Modulus to address the various challenges of machine learning based surrogate modeling of engineering simulations. DoMINO is a point cloudbased ML model that uses local geometric information to predict flow fields on discrete points. The DoMINO model is validated for the automotive aerodynamics use case using the DrivAerML dataset. Through our experiments we demonstrate the scalability, performance, accuracy and generalization of our model to both in-distribution and out-of-distribution testing samples. Moreover, the results are analyzed using a range of engineering specific metrics important for validating numerical simulations.

Fatigue modeling is essential for motion synthesis tasks to model human motions under fatigued conditions and biomechanical engineering applications, such as investigating the variations in movement patterns and posture due to fatigue, defining injury risk mitigation and prevention strategies, formulating fatigue minimization schemes and creating improved ergonomic designs. Nevertheless, employing data-driven methods for synthesizing the impact of fatigue on motion, receives little to no attention in the literature. In this work, we present Fatigue-PINN, a deep learning framework based on Physics-Informed Neural Networks, for modeling fatigued human movements, while providing joint-specific fatigue configurations for adaptation and mitigation of motion artifacts on a joint level, resulting in more realistic animations. To account for muscle fatigue, we simulate the fatigue-induced fluctuations in the maximum exerted joint torques by leveraging a PINN adaptation of the Three-Compartment Controller model to exploit physics-domain knowledge for improving accuracy. This model also introduces parametric motion alignment with respect to joint-specific fatigue, hence avoiding sharp frame transitions. Our results indicate that Fatigue-PINN accurately simulates the effects of externally perceived fatigue on open-type human movements being consistent with findings from real-world experimental fatigue studies. Since fatigue is incorporated in torque space, Fatigue-PINN provides an end-to-end encoder-decoder-like architecture, to ensure transforming joint angles to joint torques and vice-versa, thus, being compatible with motion synthesis frameworks operating on joint angles.

Vision-Language-Action (VLA) models such as π_0 have demonstrated remarkable generalization across diverse fixed-base manipulators. However, transferring these foundation models to aerial platforms remains an open challenge due to the fundamental mismatch between the quasi-static dynamics of fixed-base arms and the underactuated, highly dynamic nature of flight. In this work, we introduce AirVLA, a system that investigates the transferability of manipulation-pretrained VLAs to aerial pick-and-place tasks. We find that while visual representations transfer effectively, the specific control dynamics required for flight do not. To bridge this "dynamics gap" without retraining the foundation model, we introduce a Payload-Aware Guidance mechanism that injects payload constraints directly into the policy's flow-matching sampling process. To overcome data scarcity, we further utilize a Gaussian Splatting pipeline to synthesize navigation training data. We evaluate our method through a cumulative 460 real-world experiments which demonstrate that this synthetic data is a key enabler of performance, unlocking 100% success in navigation tasks where directly fine-tuning on teleoperation data alone attains 81% success. Our inference-time intervention, Payload-Aware Guidance, increases real-world pick-and-place task success from 23% to 50%. Finally, we evaluate the model on a long-horizon compositional task, achieving a 62% overall success rate. These results suggest that pre-trained manipulation VLAs, with appropriate data augmentation and physics-informed guidance, can transfer to aerial manipulation and navigation, as well as the composition of these tasks.

Reconstructing interactive, simulation-ready 3D scenes from a single image is a critical bottleneck for robotic manipulation. While recent single-image lifters recover plausible per-object shapes, composing them yields scenes that collapse under physical simulation due to interpenetrating, hovering, or sinking objects. Existing physics-aware methods address this strictly as a post-hoc layout correction, leaving the underlying geometric errors unresolved. To address this, we introduce SimuScene, a compositional 3D reconstruction pipeline that puts physics in the loop of shape and layout estimation. Rather than using physics merely for layout cleanup, we utilize the physics engine as a diagnostic measurement tool during the generative process itself. By diagnostically simulating reconstructed objects under gravity, we convert penetration and support failures into quantitative correction signals that drive gravity-axis stretching and amodal shape resampling. This physics-informed feedback loop mitigates accumulated reconstruction errors and produces a stable, simulation-ready compositional 3D scene. Extensive experiments demonstrate state-of-the-art performance on physical stability and geometric alignment benchmarks. We further highlight SimuScene's utility by deploying reconstructed environments in humanoid control and robot-arm manipulation tasks.

This paper presents a comprehensive collection of industrial screw driving datasets designed to advance research in manufacturing process monitoring and quality control. The collection comprises six distinct datasets with over 34,000 individual screw driving operations conducted under controlled experimental conditions, capturing the multifaceted nature of screw driving processes in plastic components. Each dataset systematically investigates specific aspects: natural thread degradation patterns through repeated use (s01), variations in surface friction conditions including contamination and surface treatments (s02), diverse assembly faults with up to 27 error types (s03-s04), and fabrication parameter variations in both upper and lower workpieces through modified injection molding settings (s05-s06). We detail the standardized experimental setup used across all datasets, including hardware specifications, process phases, and data acquisition methods. The hierarchical data model preserves the temporal and operational structure of screw driving processes, facilitating both exploratory analysis and the development of machine learning models. To maximize accessibility, we provide dual access pathways: raw data through Zenodo with a persistent DOI, and a purpose-built Python library (PyScrew) that offers consistent interfaces for data loading, preprocessing, and integration with common analysis workflows. These datasets serve diverse research applications including anomaly detection, predictive maintenance, quality control system development, feature extraction methodology evaluation, and classification of specific error conditions. By addressing the scarcity of standardized, comprehensive datasets in industrial manufacturing, this collection enables reproducible research and fair comparison of analytical approaches in an area of growing importance for industrial automation.

Agents driven by large language models are increasingly deployed on long-horizon tasks, where they use tools and modify real workspaces. How well they perform depends as much on the harness around the model as on the model itself. Existing benchmarks measure downstream task success under a fixed harness, leaving harness engineering itself unexplored. We propose Doc2Harness, a two-stage benchmark that evaluates long-horizon harness engineering directly. In Stage 1, a build model operating inside a fixed builder harness receives an interface-only contract skeleton and a development document that consolidates behavior across twelve frontier harnesses, and then constructs a complete candidate harness in an isolated container. In Stage 2, the frozen candidate harness runs in containers separate from the construction environment, one per test case, and is driven end to end by a scripted mock model. We score each test case using four observable channels, namely the requests sent to the model, the files on disk, the process exit code, and the command output; positive controls rule out vacuous passes. Across nineteen frontier models, each evaluated with three independent builds on 328 test cases, GPT-6 Astra achieves the highest pass rate at 53.05%, while the weakest model reaches 27.44%, a gap of roughly twenty-six percentage points. Even the strongest model fails nearly half of the test cases, and failures cluster around how cross-cutting functionality is split across modules. To our knowledge, Doc2Harness provides the first deterministic benchmark for measuring long-horizon harness engineering.

Demonstration augmentation is proposed for cost-efficient data acquisition, but existing methods are fundamentally limited in deformable manipulation due to two challenges: (1) the state space is high-dimensional with physics-induced constraints, making valid configurations impossible to reach via low-dimensional pose perturbations; and (2) trajectory transfer is non-equivariant, as material points no longer move rigidly together under deformation. We present DeformGen, a dynamics-based augmentation framework that achieves topological diversity for deformable objects. For the state challenge, DeformGen expands the valid state distribution by applying localized physical disturbances and forward-simulating the dynamics to obtain topology-coherent, physically plausible deformable states. For the trajectory challenge, DeformGen transfers source manipulation trajectories via deformation-field warping, which lifts per-particle displacements into a continuous spatial function to adapt the end-effector trajectory consistently with the deformed geometry. In this way, our method jointly augments the state distribution and its associated manipulation behavior. Experiments on high-fidelity deformable manipulation benchmarks show that DeformGen generally improves policy learning compared with training on the original demonstrations alone and with rigid-style augmentation baselines.

Adapting LLM agents to domain-specific tool calling remains notably brittle under evolving interfaces. Prompt and schema engineering is easy to deploy but often fragile under distribution shift and strict parsers, while continual parameter-efficient fine-tuning improves reliability at the cost of training, maintenance, and potential forgetting. We identify a critical Lazy Agent failure mode where tool necessity is nearly perfectly decodable from mid-layer activations, yet the model remains conservative in entering tool mode, revealing a representation-behavior gap. We propose Activation Steering Adapter (ASA), a training-free, inference-time controller that performs a single-shot mid-layer intervention and targets tool domains via a router-conditioned mixture of steering vectors with a probe-guided signed gate to amplify true intent while suppressing spurious triggers. On MTU-Bench with Qwen2.5-1.5B, ASA improves strict tool-use F1 from 0.18 to 0.50 while reducing the false positive rate from 0.15 to 0.05, using only about 20KB of portable assets and no weight updates.

Physical interaction quality is central to deformable-object manipulation, yet most benchmarks evaluate task success alone. A policy may complete the task while allowing slip or causing excessive compression. A primary bottleneck is the absence of visuo-tactile datasets that pair policy-visible contact observations with independent physical ground truth over complete tasks. We introduce SoftVTBench, a visuo-tactile dataset for physical-interaction-aware deformable-object manipulation. It contains 4,000 expert demonstrations and more than 50 assets, including volumetric deformable objects and visually matched rigid twins. At 20 Hz, each episode synchronizes multi-view RGB, dual-finger tactile RGB and marker motion, proprioception, language, and binary and continuous gripper actions, alongside evaluator-only finite-element (FEM) states. Building upon this dataset, we establish a closed-loop benchmark that uses fixed object-specific calibration to define the Deformation-aware Success Rate (DSR), which counts a rollout as successful only when it completes the task and keeps peak normalized deformation within tolerance. Across Diffusion Policy, π_{0.5}, and FastWAM, all 12 in-distribution configurations contain successful rollouts that violate the deformation tolerance, accounting for 0.7--24% of each configuration's successes. Under distribution shift, visuo-tactile variants achieve higher task success in all six policy--suite comparisons and higher DSR in five, whereas their in-distribution benefits are mixed. These results show that making touch available does not by itself ensure effective multimodal fusion. SoftVTBench therefore provides a common visuo-tactile resource for studying not only whether a policy succeeds, but how it physically interacts with deformable objects and when touch improves that interaction.

Code agents must both reason over long-horizon repository state and obey strict tool-use protocols. In paired Instruct/Thinking checkpoints, these capabilities are complementary but misaligned. The Instruct model is concise and tool-disciplined, whereas the Thinking model offers stronger planning and recovery behavior but often over-deliberates and degrades agent performance. We present CRANE (Constrained Reasoning Injection for Code Agents via Nullspace Editing), a training-free parameter-editing method that treats the Thinking-Instruct delta as a directional pool of candidate reasoning edits for the Instruct backbone. CRANE combines magnitude thresholding to denoise the delta, a Conservative Taylor Gate to retain edits that are jointly beneficial for reasoning transfer and tool-use preservation, and Graduated Sigmoidal Projection to suppress format-critical update directions. By merging paired Instruct and Thinking checkpoints, CRANE delivers strong gains over either individual model while preserving Instruct-level efficiency: on Roo-Eval it achieves pass1 of 66.2% (+19.5%) for Qwen3-30B-A3B and 81.5% (+8.7%) for Qwen3-Next-80B-A3B; on SWE-bench-Verified it resolves up to 14 additional instances at both scales (122/500 and 180/500); and on Terminal-Bench v2 it improves pass1/pass5 by up to 2.3%/7.8%, reaching 7.6%/17.9% and 14.8%/30.3%, respectively, consistently outperforming alternative merging strategies across all three benchmarks.

Dexterous manipulation remains a critical bottleneck in industrial automation; tasks such as cable routing, connector insertion, and precision assembly still rely heavily on manual labor despite decades of robotics research. This work presents a progression from classical, modular robotics pipelines toward an end-to-end multimodal imitation-learning framework for industrial dexterous manipulation. As a part of this work, we introduce three key contributions: a set of Industrial Dexterity Benchmark (IDB) boards aimed to mimic datacenter cable management, automotive cable harnesses, and gearbox assembly tasks; a scalable imitation learning framework (DAG-ROS); and a multimodal diffusion-based policy framework (AG-iDP3) that creates models fusing RGB images, point clouds, joint positions, and wrist-frame wrench data. Focusing on the datacenter cable manipulation board, we evaluate the performance of a task involving cleaning a single cable over variations of an end-to-end AI policy using 48 trials per configuration. The best performing configuration, a multimodal expansion Diffusion Policy (DP), includes a multi-view RGB image source passed through an R3M encoder and reaches a 78% grasp and insert combined task success rate. This performance marks a significant improvement over the 36% observed from the single-camera RGB DP baseline. Each of the tested configurations requires only approximately 100 teleoperated demonstrations per task phase. These results indicate that the correct learned policy can outperform classical vision and control robotic methods in robustness, generalization, and deployment efficiency, justifying a shift toward scalable robotic automation for high up-time industrial environments.

Unknown dynamic load carrying is one important practical application for quadruped robots. Such a problem is non-trivial, posing three major challenges in quadruped locomotion control. First, how to model or represent the dynamics of the load in a generic manner. Second, how to make the robot capture the dynamics without any external sensing. Third, how to enable the robot to interact with load handling the mutual effect and stabilizing the load. In this work, we propose a general load modeling approach called load characteristics modeling to capture the dynamics of the load. We integrate this proposed modeling technique and leverage recent advances in Reinforcement Learning (RL) based locomotion control to enable the robot to infer the dynamics of load movement and interact with the load indirectly to stabilize it and realize the sim-to-real deployment to verify its effectiveness in real scenarios. We conduct extensive comparative simulation experiments to validate the effectiveness and superiority of our proposed method. Results show that our method outperforms other methods in sudden load resistance, load stabilizing and locomotion with heavy load on rough terrain. https://leixinjonaschang.github.io/leggedloadadapt.github.io/{Project Page}.

Foundation-model policies for robotic manipulation are advancing rapidly on task success, but rigorous evaluation of whether they succeed safely is still lacking. We introduce ManiGuard, a specification-grounded framework for evaluating and improving the safety of foundation-model manipulation, comprising the ManiGuard-Bench task suite and a paired safety-annotated trajectory-generation pipeline. ManiGuard-Bench organizes six contact-rich household task families into 200 locked base tasks along a skill times constraint taxonomy, with safety specified independently of task success. Each task is evaluated under one in-distribution and four single-axis out-of-distribution perturbations that hold the safety specification fixed, giving 1,000 locked scenarios. Every rollout is runtime-checked by LTL_f-grounded automaton monitors over physics-grounded predicates rather than learned classifiers or LLM judges, in simulation and on a physical Franka platform. The pipeline pairs an automated motion-planning generator with human teleoperation, annotated by the same per-step monitor, and directly supports safety-aware fine-tuning; we release 8,000 safety-annotated demonstrations, 40 per base task. Benchmarking zero-shot and fine-tuned VLAs across more than 23,000 rollouts, we find: (i) safety must be evaluated independently of task success, as 6-21% of successful rollouts violate the specification; (ii) fine-tuning on our suite raises safe task completion from near zero to 7.5-29.8% and engaged-and-safe behavior from 16-40% to 51-72%; but (iii) a gap remains that scaling demonstrations does not close, with 21-42% of engaged rollouts still violating, two of six families below 2% safe success for every policy, and these failures persisting under distribution shift and on hardware.

This paper addresses the task of modeling Deformable Linear Objects (DLOs), such as ropes and cables, during dynamic motion over long time horizons. This task presents significant challenges due to the complex dynamics of DLOs. To address these challenges, this paper proposes differentiable Discrete Elastic Rods For deformable linear Objects with Real-time Modeling (DEFORM), a novel framework that combines a differentiable physics-based model with a learning framework to model DLOs accurately and in real-time. The performance of DEFORM is evaluated in an experimental setup involving two industrial robots and a variety of sensors. A comprehensive series of experiments demonstrate the efficacy of DEFORM in terms of accuracy, computational speed, and generalizability when compared to state-of-the-art alternatives. To further demonstrate the utility of DEFORM, this paper integrates it into a perception pipeline and illustrates its superior performance when compared to the state-of-the-art methods while tracking a DLO even in the presence of occlusions. Finally, this paper illustrates the superior performance of DEFORM when compared to state-of-the-art methods when it is applied to perform autonomous planning and control of DLOs. Project page: https://roahmlab.github.io/DEFORM/.

Layer-wise mixed-precision quantization (LMPQ) enables effective compression under extreme low-bit settings by allocating higher precision to sensitive layers. However, existing methods typically treat all intra-layer weight modules uniformly and rely on a single numerical property when estimating sensitivity, overlooking their distinct operational roles and structural characteristics. To address this, we propose NSDS, a novel calibration-free LMPQ framework driven by Numerical and Structural Dual-Sensitivity. Specifically, it first mechanistically decomposes each layer into distinct operational roles and quantifies their sensitivity from both numerical and structural perspectives. These dual-aspect scores are then aggregated into a unified layer-wise metric through a robust aggregation scheme based on MAD-Sigmoid and Soft-OR to guide bit allocation. Extensive experiments demonstrate that NSDS consistently achieves superior performance compared to various baselines across diverse models and downstream tasks, without relying on any calibration data.

Handle-based mesh deformation is a classic paradigm in computer graphics which enables intuitive edits from sparse controls. Classical techniques are fast and precise, but require users to know ideal handle placement apriori, which can be unintuitive and inconsistent. Handle sets cannot be adjusted easily, as weights are typically optimized through energies defined by the handles. Modern data-driven methods, on the other hand, provide semantic edits but sacrifice fine-grained control and speed. We propose a technique that achieves the best of both worlds: deep feature proximity yields smooth, visual-aware deformation weights with no additional regularization. Importantly, these weights are computed in real-time for any surface point, unlike prior methods which require expensive optimization. We introduce barycentric feature distillation, an improved feature distillation pipeline which leverages the full visual signal from shape renders to make distillation complexity robust to mesh resolution. This enables high resolution meshes to be processed in minutes versus potentially hours for prior methods. We preserve and extend classical properties through feature space constraints and locality weighting. Our field representation enables automatic visual symmetry detection, which we use to produce symmetry-preserving deformations. We show a proof-of-concept application which can produce deformations for meshes up to 1 million faces in real-time on a consumer-grade machine. Project page at https://threedle.github.io/dfd.

We present ROCKET, a training-free model compression method that achieves state-of-the-art performance in comparison with factorization, structured-sparsification and dynamic compression baselines. Operating under a global compression budget, ROCKET comprises two key innovations: First, it formulates layer-wise compression allocation as a multi-choice knapsack problem, selecting the optimal compression level for each layer to minimize total reconstruction error while adhering to a target model size. Second, it introduces a single-step sparse matrix factorization inspired by dictionary learning: using only a small calibration set, it sparsifies weight coefficients based on activation-weights sensitivity and then updates the dictionary in closed form via least squares bypassing iterative optimization, sparse coding, or backpropagation entirely. ROCKET consistently outperforms existing compression approaches across different model architectures at 20-50\% compression rates. Notably, it retains over 90\% of the original model's performance at 30\% compression without any fine-tuning. Moreover, when applying a light fine-tuning phase, recovery is substantially enhanced: for instance, compressing Qwen3-14B to an 8B-parameter model and healing it with just 30 million tokens yields performance nearly on par with the original Qwen3-8B. The code for ROCKET is at github.com/mts-ai/ROCKET/tree/main.

Mixture-of-Experts (MoE) LLMs scale model capacity efficiently through sparse activation, but their large expert parameter footprint, routing imbalance, and long-context KV-cache growth make deployment difficult on commodity hardware. Practical deployment often requires stacking multiple compression techniques: expert pruning removes redundant experts, weight quantization lowers model memory footprint, and KV-cache compression reduces long-context memory pressure. However, these techniques are typically evaluated in isolation, leaving open how they interact when applied together in realistic deployment pipelines. In this work, we present MoEXBench, a systematic benchmark for evaluating composable MoE compression as an end-to-end deployment workflow. MoEXBench studies 10 MoE models ranging from 30B to 235B total parameters across standard-attention, hybrid linear-attention, and sliding window attention architectures. It evaluates 20%-50% expert pruning rates, 1 to 16 bit weight-quantization schemes, and multiple KV-cache precision settings, applied both individually and in combination. MoEXBench introduces an eight-module evaluation suite that jointly measures composable-compression quality, workload and architecture robustness, pruning/quantization/KV cache sensitivity, and deployment efficiency on commodity hardware. Our results reveal non-trivial interactions among compression methods: composable compression cannot be predicted from standalone techniques, compression rate alone does not reliably predict quality loss or runtime gain, expert pruning is the dominant degradation source, and average quality can hide workload and architecture-specific failures. By releasing normalized module scores, compressed artifacts, and reproducible scripts, MoEXBench enables practical accuracy-memory-latency comparison across MoE families and hardware backends.

In mechanical structures like airplanes, cars and houses, noise is generated and transmitted through vibrations. To take measures to reduce this noise, vibrations need to be simulated with expensive numerical computations. Deep learning surrogate models present a promising alternative to classical numerical simulations as they can be evaluated magnitudes faster, while trading-off accuracy. To quantify such trade-offs systematically and foster the development of methods, we present a benchmark on the task of predicting the vibration of harmonically excited plates. The benchmark features a total of 12,000 plate geometries with varying forms of beadings, material, boundary conditions, load position and sizes with associated numerical solutions. To address the benchmark task, we propose a new network architecture, named Frequency-Query Operator, which predicts vibration patterns of plate geometries given a specific excitation frequency. Applying principles from operator learning and implicit models for shape encoding, our approach effectively addresses the prediction of highly variable frequency response functions occurring in dynamic systems. To quantify the prediction quality, we introduce a set of evaluation metrics and evaluate the method on our vibrating-plates benchmark. Our method outperforms DeepONets, Fourier Neural Operators and more traditional neural network architectures and can be used for design optimization. Code, dataset and visualizations: https://github.com/ecker-lab/Learning_Vibrating_Plates

Context-reduction layers for API-based coding agents, including command-output compressors, retrieval rankers, and API-boundary proxies, are commonly evaluated by how much context or tool output they remove. We ask a different question: which interventions actually reduce end-to-end billed cost while preserving task success? Our primary evidence is a pre-specified, hash-frozen, paired campaign of 2,908 provider-billed Claude Code runs, of which 2,848 were analyzed, covering 103 tasks, seven repositories, and three models. The campaign compared a baseline with two generations of hook-based compression and an API-boundary proxy within a broader measured program of roughly 5,500 billed executions. Three findings emerge. First, prompt-cache traffic dominated cost composition, accounting for about 87% of reconstructed four-component cost (about 80% of the actual bill), with an 8.7% dollar-weighted residual not attributable from retained telemetry. Second, local payload reduction was not a reliable predictor of end-to-end billed cost. An arm that removed 38% of estimated raw tool-output tokens incurred 6.8% higher paired cost (95% CI: +2.8% to +11.3%), while per-task reduction showed only a weak association with cost change (Pearson r = 0.15). Third, aggressive compression can remove action-critical evidence: on SWE-bench-derived Go tasks, compression reduced successful patch application from 27/40 to 15/40 by corrupting verbatim edit anchors. We propose evaluating context-reduction systems by success-adjusted billed cost rather than token reduction alone.

In warehouse environments, robots require robust picking capabilities to manage a wide variety of objects. Effective deployment demands minimal hardware, strong generalization to new products, and resilience in diverse settings. Current methods often rely on depth sensors for structural information, which suffer from high costs, complex setups, and technical limitations. Inspired by recent advancements in computer vision, we propose an innovative approach that leverages foundation models to enhance suction grasping using only RGB images. Trained solely on a synthetic dataset, our method generalizes its grasp prediction capabilities to real-world robots and a diverse range of novel objects not included in the training set. Our network achieves an 82.3\% success rate in real-world applications. The project website with code and data will be available at http://optigrasp.github.io.

Agent benchmarks score submissions with outcome verifiers that are typically hand-written and brittle, leaving them open to reward hacking. We audit 1,968 tasks across five terminal-agent benchmarks and find 323 (16%) hackable by frontier models given only the task description. This corrupts both leaderboard rankings and RL training signal, yet the standard response is manual and reactive. We introduce the hacker-fixer loop, a method for building exploit-resistant verifiers without per-task manual patching. The loop alternates three LLM agents: a hacker tries to pass the verifier without solving the task, a fixer patches the verifier to reject each discovered exploit, and a solver confirms the patched verifier still admits legitimate solutions. The loop iterates: each patch reshapes what the verifier rewards, surfacing the next exploit. We further add verifier access, and let patches transfer across tasks, to broaden the exploits the loop discovers. On KernelBench, the loop drives the attack success rate from 62% to 0% on a held-out corpus of publicly reported exploits. We also find that weaker agents in the loop can defend against much stronger hackers: Gemini 3 Flash's loop drives the stronger Gemini 3.1 Pro and Claude Opus 4.7's attack success rate from 76% and 61% to 0% on KernelBench, and Gemini 3.1 Pro's from 39% to 17% on Terminal Bench across 77 tasks. We release Terminal Wrench (323 hackable environments, 3,632 hack trajectories) as a snapshot of the current attack surface, our patched verifiers, the exploits the loop discovered, and our implementation as a basis for future work.

This paper presents the first decentralized method to enable real-world 6-DoF manipulation of a cable-suspended load using a team of Micro-Aerial Vehicles (MAVs). Our method leverages multi-agent reinforcement learning (MARL) to train an outer-loop control policy for each MAV. Unlike state-of-the-art controllers that utilize a centralized scheme, our policy does not require global states, inter-MAV communications, nor neighboring MAV information. Instead, agents communicate implicitly through load pose observations alone, which enables high scalability and flexibility. It also significantly reduces computing costs during inference time, enabling onboard deployment of the policy. In addition, we introduce a new action space design for the MAVs using linear acceleration and body rates. This choice, combined with a robust low-level controller, enables reliable sim-to-real transfer despite significant uncertainties caused by cable tension during dynamic 3D motion. We validate our method in various real-world experiments, including full-pose control under load model uncertainties, showing setpoint tracking performance comparable to the state-of-the-art centralized method. We also demonstrate cooperation amongst agents with heterogeneous control policies, and robustness to the complete in-flight loss of one MAV. Videos of experiments: https://autonomousrobots.nl/paper_websites/aerial-manipulation-marl

We present a novel approach to determine the constitutive properties of metals under large plastic strains and strain rates that otherwise are difficult to access using conventional materials testing methods. The approach exploits large-strain plastic flow past a sharp wedge, coupled with high-speed photography and image velocimetry to capture the underlying plastic flow dynamics. The inverse problem of estimating material parameters from the flow field is solved using an iterative optimization procedure that minimizes the gap between internal and external plastic work. A major advantage of the method is that it neither makes any assumptions about the flow nor requires computational simulations. To counter the problem of non-unique parameter estimates, we propose a parameterization scheme that takes advantage of the functional form of the constitutive model and reformulates the problem into a more tractable form to identify plasticity parameters uniquely. We present studies to illustrate the principle of the method with two materials with widely different plastic flow characteristics: copper (strain hardening) and a lead-free solder alloy (rate sensitive and deformation history dependent). The results demonstrate the efficacy of the method in reliably determining the material parameters under high strain/strain rate conditions of relevance to a range of practical engineering problems.

Grasping is a fundamental capability for robots to interact with the physical world. Humans, equipped with two hands, autonomously select appropriate grasp strategies based on the shape, size, and weight of objects, enabling robust grasping and subsequent manipulation. In contrast, current robotic grasping remains limited, particularly in multi-strategy settings. Although substantial efforts have targeted parallel-gripper and single-hand grasping, dexterous grasping for bimanual robots remains underexplored, with data being a primary bottleneck. Achieving physically plausible and geometrically conforming grasps that can withstand external wrenches poses significant challenges. To address these issues, we introduce UltraDexGrasp, a framework for universal dexterous grasping with bimanual robots. The proposed data-generation pipeline integrates optimization-based grasp synthesis with planning-based demonstration generation, yielding high-quality and diverse trajectories across multiple grasp strategies. With this framework, we curate UltraDexGrasp-20M, a large-scale, multi-strategy grasp dataset comprising 20 million frames across 1,000 objects. Based on UltraDexGrasp-20M, we further develop a simple yet effective grasp policy that takes point clouds as input, aggregates scene features via unidirectional attention, and predicts control commands. Trained exclusively on synthetic data, the policy achieves robust zero-shot sim-to-real transfer and consistently succeeds on novel objects with varied shapes, sizes, and weights, attaining an average success rate of 81.2% in real-world universal dexterous grasping. To facilitate future research on grasping with bimanual robots, we open-source the data generation pipeline at https://github.com/InternRobotics/UltraDexGrasp.

As LLMs advance their reasoning capabilities about the physical world, the absence of rigorous benchmarks for evaluating their ability to generate scientifically valid physical models has become a critical gap. Computational mechanics, which develops and applies mathematical models and numerical methods to predict the behavior of physical systems under forces, deformation, and constraints, provides an ideal foundation for structured scientific reasoning evaluation. Problems follow clear mathematical structure, enforce strict physical and numerical constraints, and support objective verification. The discipline requires constructing explicit models of physical systems and reasoning about geometry, spatial relationships, and material behavior, connecting directly to emerging AI goals in physical reasoning and world modeling. We introduce FEM-Bench, a computational mechanics benchmark designed to evaluate the ability of LLMs to generate correct finite element method (FEM) and related code. FEM-Bench 2025 contains a suite of introductory but nontrivial tasks aligned with material from a first graduate course on computational mechanics. These tasks capture essential numerical and physical modeling challenges while representing only a small fraction of the complexity present in the discipline. Despite their simplicity, state-of-the-art LLMs do not reliably solve all of them. In a five attempt run, the best performing model at function writing, Gemini 3 Pro, completed 30/33 tasks at least once and 26/33 tasks all five times. The best performing model at unit test writing, GPT-5, had an Average Joint Success Rate of 73.8%. Other popular models showed broad performance variation. FEM-Bench establishes a structured foundation for evaluating AI-generated scientific code, and future iterations will incorporate increasingly sophisticated tasks to track progress as models evolve.

Learning-based simulation of multi-object rigid-body dynamics remains difficult because contact is discontinuous and errors compound over long horizons. Most existing methods remain tied to mesh connectivity and vertex-level message passing, which limits their applicability to mesh-free inputs such as point clouds and leads to high computational cost. Efficiently modeling high-fidelity rigid-body dynamics from mesh-free representations, therefore, remains challenging. We introduce RigidFormer, an object-centric Transformer-based model that learns mesh-free rigid-body dynamics with controllable integration step sizes. RigidFormer reasons at the object level and advances each object through compact anchors; Anchor-Vertex Pooling enriches these anchors with local vertex features, retaining contact-relevant geometry without dense vertex-level interaction. We propose Anchor-based RoPE to inject anchor geometry into attention while respecting the unordered nature of objects and anchors: object-token processing is permutation-equivariant, and the mean-pooled anchor descriptor is invariant to anchor reindexing while preserving shape extent. RigidFormer further enforces rigidity by projecting updates onto the rigid-body manifold using differentiable Kabsch alignment. On standard benchmarks, RigidFormer outperforms or matches mesh-based baselines using point inputs, runs faster, generalizes to unseen point resolutions and across datasets, and scales to 200+ objects; we also show a preliminary extension to command-conditioned articulated bodies by treating body parts as interacting object-level components.

LLM-based coding agents extend their capabilities via third-party agent skills distributed through open marketplaces without mandatory security review. Unlike traditional packages, these skills are executed as operational directives with system-level privileges, so a single malicious skill can compromise the host. Prior work has not examined whether supply-chain attacks can directly hijack an agent's action space, such as file writes, shell commands, and network requests, despite existing safeguards. We introduce Document-Driven Implicit Payload Execution (DDIPE), which embeds malicious logic in code examples and configuration templates within skill documentation. Because agents reuse these examples during normal tasks, the payload executes without explicit prompts. Using an LLM-driven pipeline, we generate 1,070 adversarial skills from 81 seeds across 15 MITRE ATTACK categories. Across four frameworks and five models, DDIPE achieves 11.6% to 33.5% bypass rates, while explicit instruction attacks achieve 0% under strong defenses. Static analysis detects most cases, but 2.5% evade both detection and alignment. Responsible disclosure led to four confirmed vulnerabilities and two fixes.

Machine learning-based surrogate models have emerged as a powerful tool to accelerate simulation-driven scientific workflows. However, their widespread adoption is hindered by the lack of large-scale, diverse, and standardized datasets tailored to physics-based simulations. While existing initiatives provide valuable contributions, many are limited in scope-focusing on specific physics domains, relying on fragmented tooling, or adhering to overly simplistic datamodels that restrict generalization. To address these limitations, we introduce PLAID (Physics-Learning AI Datamodel), a flexible and extensible framework for representing and sharing datasets of physics simulations. PLAID defines a unified standard for describing simulation data and is accompanied by a library for creating, reading, and manipulating complex datasets across a wide range of physical use cases (gitlab.com/drti/plaid). We release six carefully crafted datasets under the PLAID standard, covering structural mechanics and computational fluid dynamics, and provide baseline benchmarks using representative learning methods. Benchmarking tools are made available on Hugging Face, enabling direct participation by the community and contribution to ongoing evaluation efforts (huggingface.co/PLAIDcompetitions).

Engineering design optimization seeks to automatically determine the shapes, topologies, or parameters of components that maximize performance under given conditions. This process often depends on physics-based simulations, which are difficult to install, computationally expensive, and require domain-specific expertise. To mitigate these challenges, we introduce EngiBench, the first open-source library and datasets spanning diverse domains for data-driven engineering design. EngiBench provides a unified API and a curated set of benchmarks -- covering aeronautics, heat conduction, photonics, and more -- that enable fair, reproducible comparisons of optimization and machine learning algorithms, such as generative or surrogate models. We also release EngiOpt, a companion library offering a collection of such algorithms compatible with the EngiBench interface. Both libraries are modular, letting users plug in novel algorithms or problems, automate end-to-end experiment workflows, and leverage built-in utilities for visualization, dataset generation, feasibility checks, and performance analysis. We demonstrate their versatility through experiments comparing state-of-the-art techniques across multiple engineering design problems, an undertaking that was previously prohibitively time-consuming to perform. Finally, we show that these problems pose significant challenges for standard machine learning methods due to highly sensitive and constrained design manifolds.

As LLM agents are deployed in long-horizon sessions, context accumulation drives up inference costs. Existing approaches utilize text pruning or dynamic memory eviction to minimize token footprints; however, their unconstrained sequence mutations alter layouts, introducing prefix mismatches and cache invalidation. This reveals a critical trade-off between text sparsity and prompt cache continuity. To address this, we present TokenPilot, a dual-granularity context management framework. Globally, Ingestion-Aware Compaction acts as a framework harness to stabilize prompt prefixes and eliminate open-world environmental noise at the ingestion gate. Locally, Lifecycle-Aware Eviction monitors the ongoing residual utility of context segments, enforcing a conservative batch-turn schedule to offload content segments only when task relevance expires. Experiments on PinchBench and Claw-Eval under both isolated and continuous modes demonstrate that TokenPilot reduces costs by 61% and 56% in isolated mode, and 61% and 87% in continuous mode, while maintaining competitive performance compared to prior systems. TokenPilot has been integrated into LightMem2 at https://github.com/zjunlp/LightMem2.

Construction-safety models must handle concrete deployment risks, such as a worker standing near a scaffold edge without guardrails, rather than only recognize common objects in curated images. Yet real inspection archives are redundant, long-tailed, and collected across changing sites and months. We introduce SafeBuild-Bench, a metadata-driven benchmark for evaluating multimodal large language models on construction safety under realistic temporal and site variation. It is mined from 100K+ industrial image-text records and contains 3,314 task instances from over 3,000 expert-verified images, covering multiple-choice hazard identification and free-form hazard description. To make expert verification scalable, we develop GEMS, a graph-enhanced multimodal selection pipeline that combines a proxy-model confusion signal with graph-based diversity to identify informative candidates from redundant streams. On public instruction-tuning data, GEMS-selected subsets preserve robustness-oriented performance under small data budgets. On SafeBuild-Bench, current MLLMs remain far from reliable construction-safety understanding, with the best overall score near 60. We release the benchmark, evaluation scripts, and GEMS codebase at https://github.com/safebuild/gems.

Large language models (LLMs) are increasingly constrained by memory capacity, weight bandwidth, and checkpoint storage during deployment. Existing low-bit compression methods mainly follow two directions. Scalar or group-wise quantization is simple and compatible with efficient low-precision kernels, but its representation capacity becomes limited when the target budget approaches 2 bits per weight. Vector-quantized weight compression provides a richer block-level representation, but usually introduces explicit codebooks, index lookup, and additional storage accounting. This paper presents BiSCo-LLM, a codebook-free binary spherical coding framework for extreme low-bit LLM weight compression. The core pipeline is built on three components. First, local weight chunks are mapped onto a unit hypersphere and binarized into compact spherical codes, so that the main payload is a bit-packed sign stream rather than explicit VQ centroids. Second, a residual BSQ stage encodes the reconstruction error left by the base spherical codec, providing an explicit rate-distortion path without stored codebooks. Third, category-wise recovery distillation is performed after replacing each Transformer module category, reducing the mismatch between local weight reconstruction and assembled model behavior. A small 8-bit protected-channel path is used as an auxiliary stabilization mechanism for sensitive channels and is counted separately from the BSQ payload. The reported storage budget includes binary codes, neural decoders, protected-channel payloads, LoRA adapters, and metadata.

Single-pixel sensing encodes a scene as a short sequence of coded measurements, and image-free methods infer the task directly from that sequence. Removing reconstruction does not remove the difficulty: it relocates it to the lift, the map from 1D measurements to a 2D representation, which prior work treats as a trivial reshape. We recast the lift as the central design axis of image-free sensing and order methods by how strongly it adapts to its input: a fixed-physics inverse (reconstruct-then-segment), a learned static projection, or a content-adaptive retrieval; position on this lift spectrum predicts behavior as acquisition degrades. The spatiotemporal soft-fusion (STSF) network pairs a probe-selected recurrent encoder with a cross-attention lift chosen by a parameter-matched ablation, ahead of its U-Net++ decoder, and trains under task-prioritized loss scheduling (TPLS), a scheduled reconstruction prior. In simulation, STSF+TPLS surpasses the prior image-free baseline on three datasets at 3.13% sampling (+3.2 to +9.9 pp foreground mIoU) and plateaus down to 0.39%. The strongest clean-trained reconstruct-then-segment baseline wins the noiseless limit, but under calibrated measurement noise image-free inference overtakes it, for a measured reason: the reconstruction pipeline amplifies the identical measurement noise before its segmenter reads it. Each region fails in its own signature: collapse, imprinting, or coarsening. STSF+TPLS transfers without fine-tuning to a real single-pixel bench as a proof of concept, at about 14 ms per mask. Charting the lift turns a scattered design space into a map of which lift to deploy at each operating point. Code and pretrained weights: https://github.com/Hanyuyuan6/STSF-TPLS

We introduce Dynabench, an open-source platform for dynamic dataset creation and model benchmarking. Dynabench runs in a web browser and supports human-and-model-in-the-loop dataset creation: annotators seek to create examples that a target model will misclassify, but that another person will not. In this paper, we argue that Dynabench addresses a critical need in our community: contemporary models quickly achieve outstanding performance on benchmark tasks but nonetheless fail on simple challenge examples and falter in real-world scenarios. With Dynabench, dataset creation, model development, and model assessment can directly inform each other, leading to more robust and informative benchmarks. We report on four initial NLP tasks, illustrating these concepts and highlighting the promise of the platform, and address potential objections to dynamic benchmarking as a new standard for the field.

Pre-Phase-A design of lunar micro-rovers is dominated by tightly coupled mobility, power, thermal, and mass trades, yet conceptual-design tooling for the rapidly growing sub-50 kg class is typically proprietary, weakly benchmarked, or too slow to drive optimization. We contribute RoverDevKit, an open analytical evaluator coupling terramechanics, mass, power, thermal survival, and traverse that runs in 30ms per mission, fast enough to serve directly as a multi-objective optimizer's fitness function. Across mare, polar, highland, and crater-rim scenarios, NSGA-II Pareto fronts show that the binding design trade changes with mission profile within a single mass class: energy storage dominates at high latitude, slope traction on loose highland regolith, and traverse range on mare and crater-rim missions. Notably, rigid four-wheel layouts Pareto-dominate the full modeled mass range under smooth-regolith range-mass-slope objectives, contrary to the expectation that six-wheel architectures become optimal at heavier masses; six-wheel rocker-bogie layouts enter the Pareto set only once missions impose an obstacle-navigation requirement. The evaluator performance is benchmarked using both component and system checks: the terramechanics kernel matches measured single-wheel drawbar pull within the literature model-form band on two independent datasets, the bottom-up mass model predicts published in-class (5-50 kg) rover masses to 13.3% median absolute error, and a rediscovery check places real micro-rovers near the optimizer's fronts. Propagating the measured terramechanics error through the optimizer leaves the qualitative design rules unchanged. The tool, data, validation artifacts, and figure-generation scripts are released openly.

Agentic reinforcement learning (RL) disaggregates training from rollout, so each policy update must reach the rollout clusters before the next batch. Transferring a full 1T checkpoint for such weight synchronization (refit) takes 87.5 min between two AWS regions. Measurements of BF16 training show that about 1% of weights change their stored values per step. Recent systems exploit this sparsity but fall short on placement, exactness, or efficiency: they reimplement placement rules, assemble full tensors, rebuild values arithmetically, or use a cross-cluster collective, and none fully recovers from mid-refit failures. We present NeMo-DCR (Delta-Compressed Refit), which sends only changes yet is bit-exact: receivers obtain the same parameter and buffer bits as a dense refit. For placement, fixed affine mappings project changes from training shards into the checkpoint's canonical coordinates, residual conversion covers the other changes, and the serving runtime's native loader places all changes in receiver storage. For exactness, compressible XOR masks carry affine changes whose projection and loader preserve stored bits, and overwrites carry the others. Receivers apply both in place, retries overwrite partial writes, and a joint commit binds the policy to the baseline for the next delta. For efficiency, object storage or a relay tree streams payloads during delta construction, without a cross-cluster collective. Even at 3% and 5% change rates, NeMo-DCR refits of 30B-1T models are 12-40times faster than a transport-only full-checkpoint reference. A 1T relay-tree refit at 3% takes 150 s instead of 87.5 min, making refits practical for cross-cluster agentic RL at trillion-parameter scale.

This study investigates the application of deep residual networks for predicting the dynamics of interacting three-dimensional rigid bodies. We present a framework combining a 3D physics simulator implemented in C++ with a deep learning model constructed using PyTorch. The simulator generates training data encompassing linear and angular motion, elastic collisions, fluid friction, gravitational effects, and damping. Our deep residual network, consisting of an input layer, multiple residual blocks, and an output layer, is designed to handle the complexities of 3D dynamics. We evaluate the network's performance using a datasetof 10,000 simulated scenarios, each involving 3-5 interacting rigid bodies. The model achieves a mean squared error of 0.015 for position predictions and 0.022 for orientation predictions, representing a 25% improvement over baseline methods. Our results demonstrate the network's ability to capture intricate physical interactions, with particular success in predicting elastic collisions and rotational dynamics. This work significantly contributes to physics-informed machine learning by showcasing the immense potential of deep residual networks in modeling complex 3D physical systems. We discuss our approach's limitations and propose future directions for improving generalization to more diverse object shapes and materials.

Machine learning (ML) model serving has become a dominant consumer of GPU infrastructure, yet capacity planning in these systems remains largely ad hoc. Under-provisioning leads to service-level objective (SLO) violations and production incidents, while over-provisioning results in substantial resource waste. This paper presents \sys, an industrial load testing framework for ML serving systems that systematically estimates serving capacity through an adaptive, feedback-driven search strategy. The approach leverages real-time performance signals, incorporating dampening, spike tolerance, and convergence detection to efficiently identify maximum sustainable throughput under SLO constraints. We evaluate \sys through a longitudinal analysis of 14 industrial case studies spanning four ML architecture classes: recommendation, ranking, vision, and NLP. This study demonstrates that systematic load testing leads to substantial improvements in GPU resource efficiency and operational reliability. Prior to adopting \sys, a significant fraction of model launches were under-provisioned, resulting in recurring incidents; these issues were substantially reduced after deployment. Our results show that ML-specific design decisions are critical to accurate capacity estimation: workload calibration using recorded traffic reduces estimation error from approximately 30\% to 2--6\%, while proper warmup handling yields a 22.2\% improvement in accuracy. Further analysis reveals key factors influencing prediction error, including model size and co-location effects. This paper distills six lessons and derive architectural guidelines for ML load testing, offering actionable insights for building reliable and efficient ML serving systems.

Operating robots precisely and at high speeds has been a long-standing goal of robotics research. Balancing these competing demands is key to enabling the seamless collaboration of robots and humans and increasing task performance. However, traditional motor-driven systems often fall short in this balancing act. Due to their rigid and often heavy design exacerbated by positioning the motors into the joints, faster motions of such robots transfer high forces at impact. To enable precise and safe dynamic motions, we introduce a four degree-of-freedom~(DoF) tendon-driven robot arm. Tendons allow placing the actuation at the base to reduce the robot's inertia, which we show significantly reduces peak collision forces compared to conventional robots with motors placed near the joints. Pairing our robot with pneumatic muscles allows generating high forces and highly accelerated motions, while benefiting from impact resilience through passive compliance. Since tendons are subject to additional friction and hence prone to wear and tear, we validate the reliability of our robotic arm on various experiments, including long-term dynamic motions. We also demonstrate its ease of control by quantifying the nonlinearities of the system and the performance on a challenging dynamic table tennis task learned from scratch using reinforcement learning. We open-source the entire hardware design, which can be largely 3D printed, the control software, and a proprioceptive dataset of 25 days of diverse robot motions at webdav.tuebingen.mpg.de/pamy2.

Automated analysis for engineering structures offers considerable potential for boosting efficiency by minimizing repetitive tasks. Although AI-driven methods are increasingly common, no systematic framework yet leverages Large Language Models (LLMs) for automatic structural analysis. To address this gap, we propose a novel framework that integrates LLMs with structural analysis software. LLMs serve as the core engine: they parse structural descriptions from text and translate them into executable Python scripts. Moreover, the framework integrates the generative capabilities of LLMs with code-based finite element (FE) tools like OpenSeesPy. It employs domain-specific prompt design and in-context learning strategies to enhance the LLM's problem-solving capabilities and generative stability, enabling fully automated structural analysis from descriptive text to model outputs. In our experiments, we introduce a well-curated small-scale benchmark dataset of 20 structural analysis word problems (SAWPs) with ground-truth solutions and evaluate the performance of different LLMs within our framework in solving these SAWPs. The role of system instructions, crafted by structural engineers, is also investigated to understand their impact on LLM-driven structural analysis. Additionally, the generative stability of our framework is examined. Through multiple validation experiments on the benchmark, our results demonstrate that the proposed framework can substantially increase the level of automation in solving SAWPs compared to traditional methods. Quantitatively, the framework, built on GPT-4o, achieved 100% accuracy, surpassing GPT-4 (85%), Gemini 1.5 Pro (80%), and Llama-3.3 (30%) on the test examples. Furthermore, integrating domain-specific instructions enhanced performance by 30% on problems with asymmetrical structural configurations.

In this work, we aim to teach robots to manipulate various thin-shell materials. Prior works studying thin-shell object manipulation mostly rely on heuristic policies or learn policies from real-world video demonstrations, and only focus on limited material types and tasks (e.g., cloth unfolding). However, these approaches face significant challenges when extended to a wider variety of thin-shell materials and a diverse range of tasks. While virtual simulations are shown to be effective in diverse robot skill learning and evaluation, prior thin-shell simulation environments only support a subset of thin-shell materials, which also limits their supported range of tasks. We introduce ThinShellLab - a fully differentiable simulation platform tailored for robotic interactions with diverse thin-shell materials possessing varying material properties, enabling flexible thin-shell manipulation skill learning and evaluation. Our experiments suggest that manipulating thin-shell objects presents several unique challenges: 1) thin-shell manipulation relies heavily on frictional forces due to the objects' co-dimensional nature, 2) the materials being manipulated are highly sensitive to minimal variations in interaction actions, and 3) the constant and frequent alteration in contact pairs makes trajectory optimization methods susceptible to local optima, and neither standard reinforcement learning algorithms nor trajectory optimization methods (either gradient-based or gradient-free) are able to solve the tasks alone. To overcome these challenges, we present an optimization scheme that couples sampling-based trajectory optimization and gradient-based optimization, boosting both learning efficiency and converged performance across various proposed tasks. In addition, the differentiable nature of our platform facilitates a smooth sim-to-real transition.

Due to advances in observation and imaging technologies, modern astronomical satellites generate large volumes of data. This necessitates efficient onboard data processing and high-speed data downlink. Reflecting this trend is the VERTECS 6U Astronomical Nanosatellite. Designed for the observation of Extragalactic Background Light (EBL), this mission is expected to generate a substantial amount of image data, particularly within the confines of CubeSat capabilities. This paper introduces the VERTECS Camera Control Board (CCB), an open-source payload interface board leveraging Commercial Off-The-Shelf (COTS) components, with a Raspberry Pi Compute Module 4 at its core. The VERTECS CCB hardware and software have been designed from the ground up to serve as the sole interface between the VERTECS bus system and astronomical imaging payload, while providing compute capability not usually seen in nanosatellites of this class. Responsible for mission data processing, it will facilitate high-speed data transfer from the imaging payload via gigabit Ethernet, while also providing a high-bitrate serial connection to the payload X-band transmitter for mission data downlink. Additional interfaces for secondary payloads are provided via USB-C and standard 15-pin camera connectors. The Raspberry Pi embedded within the VERTECS CCB operates on a standard Linux distribution, streamlining the software development process. Beyond addressing the current mission's payload control and data handling requirements, the CCB sets the stage for future missions with heightened data demands. Furthermore, it supports the adoption of machine learning and other compute-intensive applications in orbit. This paper delves into the development of the VERTECS CCB, offering insights into the design and validation of this next-generation payload interface, to ensure that it can survive the rigors of space flight.

In this work, we propose a framework that constructs reduced order models for nonlinear structural mechanics in a nonintrusive fashion, and can handle large scale simulations. We identify three steps that are carried out separately in time, and possibly on different devices: (i) the production of high-fidelity solutions by a commercial software, (ii) the offline stage of the model reduction and (iii) the online stage where the reduced order model is exploited. The nonintrusivity assumes that only the displacement field solution is known, and relies on operations on simulation data during the offline phase by using an in-house code. The compatibility with a new commercial code only needs the implementation of a routine converting the mesh and result format into our in-house data format. The nonintrusive capabilities of the framework are demonstrated on numerical experiments using commercial versions of the finite element softwares Zset and Ansys Mechanical. The nonlinear constitutive equations are evaluated by using the same external plugins as for Zset or Ansys Mechanical. The large scale simulations are handled using domain decomposition and parallel computing with distributed memory. The features and performances of the framework are evaluated on two numerical applications involving elastoviscoplastic materials: the second one involves a model of high-pressure blade, where the framework is used to extrapolate cyclic loadings in 6.5 hours, whereas the reference high-fidelity computation would take 9.5 days.

In this paper, we address the problem of tactile sim-to-real policy transfer for contact-rich tasks. Existing methods primarily focus on vision-based sensors and emphasize image rendering quality while providing overly simplistic models of force and shear. Consequently, these models exhibit a large sim-to-real gap for many dexterous tasks. Here, we present HydroShear, a non-holonomic hydroelastic tactile simulator that advances the state-of-the-art by modeling: a) stick-slip transitions, b) path-dependent force and shear build up, and c) full SE(3) object-sensor interactions. HydroShear extends hydroelastic contact models using Signed Distance Functions (SDFs) to track the displacements of the on-surface points of an indenter during physical interaction with the sensor membrane. Our approach generates physics-based, computationally efficient force fields from arbitrary watertight geometries while remaining agnostic to the underlying physics engine. In experiments with GelSight Minis, HydroShear more faithfully reproduces real tactile shear compared to existing methods. This fidelity enables zero-shot sim-to-real transfer of reinforcement learning policies across four tasks: peg insertion, bin packing, book shelving for insertion, and drawer pulling for fine gripper control under slip. Our method achieves a 93% average success rate, outperforming policies trained on tactile images (34%) and alternative shear simulation methods (58%-61%).

The escalating demand to migrate legacy software across different Instruction Set Architectures (ISAs) has driven the development of assembly-to-assembly translators to map between their respective assembly languages. However, the development of these tools requires substantial engineering effort. State-of-the-art approaches use lifting, a technique where source assembly code is translated to an architecture-independent intermediate representation (IR) (for example, the LLVM IR) and use a pre-existing compiler to recompile the IR to the target ISA. However, the hand-written rules these lifters employ are sensitive to the particular compiler and optimization level used to generate the code and require significant engineering effort to support each new ISA. We propose Forklift, the first neural lifter that learns how to translate assembly to LLVM IR using a token-level encoder-decoder Transformer. We show how to incrementally add support to new ISAs by fine tuning the assembly encoder and freezing the IR decoder, improving the overall accuracy and efficiency. We collect millions of parallel LLVM IR, x86, ARM, and RISC-V programs across compilers and optimization levels to train Forklift and set up an input/output-based accuracy harness. We evaluate Forklift on two challenging benchmark suites and translate 2.5x more x86 programs than a state-of-the-art hand-written lifter and 4.4x more x86 programs than GPT-4 as well as enabling translation from new ISAs.

Robotic systems operating in unstructured environments require the ability to switch between compliant and rigid states to perform diverse tasks such as adaptive grasping, high-force manipulation, shape holding, and navigation in constrained spaces, among others. However, many existing variable stiffness solutions rely on complex actuation schemes, continuous input power, or monolithic designs, limiting their modularity and scalability. This paper presents the Programmable Locking Cell (PLC)-a modular, tendon-driven unit that achieves discrete stiffness modulation through mechanically interlocked joints actuated by cable tension. Each unit transitions between compliant and firm states via structural engagement, and the assembled system exhibits high stiffness variation-up to 950% per unit-without susceptibility to damage under high payload in the firm state. Multiple PLC units can be assembled into reconfigurable robotic structures with spatially programmable stiffness. We validate the design through two functional prototypes: (1) a variable-stiffness gripper capable of adaptive grasping, firm holding, and in-hand manipulation; and (2) a pipe-traversing robot composed of serial PLC units that achieves shape adaptability and stiffness control in confined environments. These results demonstrate the PLC as a scalable, structure-centric mechanism for programmable stiffness and motion, enabling robotic systems with reconfigurable morphology and task-adaptive interaction.

Large Language Models (LLMs) have transformed software engineering, but their application to physical engineering domains remains underexplored. This paper evaluates LLMs' capabilities in high-powered rocketry design through RocketBench, a benchmark connecting LLMs to high-fidelity rocket simulations. We test models on two increasingly complex design tasks: target altitude optimization and precision landing challenges. Our findings reveal that while state-of-the-art LLMs demonstrate strong baseline engineering knowledge, they struggle to iterate on their designs when given simulation results and ultimately plateau below human performance levels. However, when enhanced with reinforcement learning (RL), we show that a 7B parameter model outperforms both SoTA foundation models and human experts. This research demonstrates that RL-trained LLMs can serve as effective tools for complex engineering optimization, potentially transforming engineering domains beyond software development.

Weight compression helps large neural networks fit deployment memory budgets, but common fixed-width formats offer only coarse storage choices. Entropy coding supports finer rates, yet the achieved size depends on the quantized weight distribution and coding overhead. Exploiting this flexibility requires accurate rate selection and efficient weight reconstruction for inference. We present EntroPack, an entropy-coded weight compressor that supports arbitrary target bitrates without activation calibration or fine-tuning. It combines row-normalized E_8 lattice quantization with a conditional probability model of lattice coordinates. Sampled storage estimates select the quantization resolution without repeated full-stream encoding. The final coordinates are entropy-coded in independently decodable tiles, enabling fast, fused symbol decoding and numerical weight reconstruction on the GPU. EntroPack supports floating-point and integer weight containers, such as BF16, FP16, FP8, and INT8, with storage bitrate controlled independently of numerical precision. Online decoding adds latency that grows with weight count, making the method well suited to compute-intensive workloads such as diffusion denoising and Transformer prefill. Experiments demonstrate fast encoding and modest inference overhead in these settings. When compressing the linear-layer weights of the image generator Z-Image-Turbo, EntroPack achieves substantially lower weight and denoiser output errors than fixed-width formats at comparable storage rates, with modest denoising-step overhead. Targeting 4 bits per parameter, it achieves lower weight and denoiser output errors than NF4, including about 24% lower relative L_2 weight error, with less storage. Source code is available at https://github.com/modelscope/entropack.

We introduce a practical robotics solution for the task of heterogeneous bagging, requiring the placement of multiple rigid and deformable objects into a deformable bag. This is a difficult task as it features complex interactions between multiple highly deformable objects under limited observability. To tackle these challenges, we propose a robotic system consisting of two learned policies: a rearrangement policy that learns to place multiple rigid objects and fold deformable objects in order to achieve desirable pre-bagging conditions, and a lifting policy to infer suitable grasp points for bi-manual bag lifting. We evaluate these learned policies on a real-world three-arm robot platform that achieves a 70% heterogeneous bagging success rate with novel objects. To facilitate future research and comparison, we also develop a novel heterogeneous bagging simulation benchmark that will be made publicly available.

The adoption of Foundation Models in resource-constrained environments remains challenging due to their large size and inference costs. A promising way to overcome these limitations is post-training compression, which aims to balance reduced model size against performance degradation. This work presents Any Compression via Iterative Pruning (ACIP), a novel algorithmic approach to determine a compression-performance trade-off from a single stochastic gradient descent run. To ensure parameter efficiency, we use an SVD-reparametrization of linear layers and iteratively prune their singular values with a sparsity-inducing penalty. The resulting pruning order gives rise to a global parameter ranking that allows us to materialize models of any target size. Importantly, the compressed models exhibit strong predictive downstream performance without the need for costly fine-tuning. We evaluate ACIP on a large selection of open-weight LLMs and tasks, and demonstrate state-of-the-art results compared to existing factorisation-based compression methods. We also show that ACIP seamlessly complements common quantization-based compression techniques.

Sycophancy in LLMs is documented across 70+ papers, but expert agreement on construct boundaries remains low (ICC=.184; Ye et al., 2026). The construct fragments because behavioral classification depends on which surface form is privileged. We adopt a materials-science framing: conversation as test specimen under load, LLM-model as material charge, pushback as progressive load, stance-flip as material failure. We characterize this failure across three loading cases (debate n=1000; false-presuppositions n=3400; ethical-setting n=3400; 10-17 material charges per case; 7800 specimens total) using 14 turn-level axis-measurements spanning velocity, damage accumulation, frame-drift, brittleness, and direction stability, plus three speaker-resolved axes from an independent pipeline. The measurements are Hooke-coupled (σ= E cdot varepsilon analog) and reproduce across loading cases with effects up to |r_{rb}| = 0.35 on debate; the sign structure adds a second pattern: the ethical-setting case inverts the velocity and accumulation blocks. Variance composition partitions into two profiles: debate is charge-dominated (brittle-fracture-like: the material grade decides), false-presuppositions and ethical-setting are topic-dominated (creep-like: the load decides); the ratios (2.03 vs 0.13/0.17) are estimator-dependent, for debate even in direction. Cross-judge reliability (GPT-4o vs Haiku 4.5) shows debate scoring is judge-robust (Cohen's κ= 0.88) while false-presupposition scoring is judge-sensitive (κ= 0.36) -- a caveat single-judge benchmarks must report. This is the methodological move Ye et al.'s diagnosis calls for: a multi-axis characterization that does not depend on which surface form of the construct one privileges.