fusion-design-lab / docs /P1_MEASURED_SWEEP_NOTE.md
CreativeEngineer's picture
feat: add initial p1 validation artifacts
92c59c2

P1 Measured Sweep Note

Artifact:

  • baselines/sweep_results/measured_sweep_20260308T050043Z.json

Run shape:

  • repaired 4-knob family
  • low-fidelity verifier only
  • 3 x 3 x 3 x 3 = 81 configurations

Summary:

  • total configurations: 81
  • evaluated successfully: 63
  • crashed: 18
  • feasible: 0
  • crash rate: 22.2%

Most useful result:

  • the best coarse near-boundary point was:
    • aspect_ratio=3.8
    • elongation=1.8
    • rotational_transform=1.55
    • triangularity_scale=0.55
    • p1_feasibility=0.035208

What the sweep tells us:

  • the repaired family does have a usable near-boundary band
  • coarse global resolution is still too blunt to capture the small low-fidelity feasible pocket seen in targeted local probes
  • rotational_transform=1.55 performed better than 1.2, while 1.9 produced a concentrated crash zone
  • triangularity_scale=0.55 was the best coarse setting overall; 0.7 improved triangularity but also increased crash rate

Actionable conclusion:

  • keep the current ranges and deltas for now
  • do not freeze a new default reset seed from the coarse sweep alone
  • use the coarse sweep plus local probes to drive the first tracked fixtures and manual playtesting