index int64 0 4.08k | text stringlengths 34 4.9k ⌀ | url stringclasses 38
values |
|---|---|---|
2,855 | User & Authentication
To configure traffic shaping based on dynamic RADIUS VSAs:
1. Configure the RADIUS server users file to identify WISPr-Bandwidth-Max-Up and WISPr-Bandwidth-Max-Down:
The WISPr-Bandwidth is measured in bps, and the FortiOS dynamic shaper is measured
in Bps.
WISPr-Bandwidth-Max-Up = 1004857,
WISPr-B... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,856 | User & Authentication
Verification
After a client PC is authenticated by the RADIUS server, dynamic shaping is applied to the client based on the IP
address.
Use the following commands to monitor the dynamic shaper:
# diagnose firewall shaper dynamic-shaper stats
# diagnose firewall shaper dynamic-shaper list {ip | ipv... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,857 | User & Authentication
type: fw, id: 0, duration: 38, idled: 16
expire: 562
flag(814): hard radius no_idle
server: rad1
packets: in 8207 out 3999, bytes: in 12306164 out 226963
group_id: 3
group_name: group_radius
10.1.100.22, test-shaper2
src_mac: **:**:**:**:**:**
type: fw, id: 0, duration: 24, idled: 24
expire: 156, ... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,858 | User & Authentication
hook=post dir=reply act=noop 172.16.200.44:80->10.1.100.22:35561(0.0.0.0:0)
pos/(before,after) 0/(0,0), 0/(0,0)
src_mac=**:**:**:**:**:** dst_mac=**:**:**:**:**:**
misc=0 policy_id=2 auth_info=0 chk_client_info=0 vd=1
serial=0005994d tos=ff/ff app_list=0 app=0 url_cat=0
sdwan_mbr_seq=0 sdwan_servi... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,859 | User & Authentication
WISPr-Bandwidth-Max to pc1. The maximum bandwidth on pc1 changes to 5 Mbps download and 2.5Mbps upload. On
pc2, the maximum bandwidth is also 5 Mbps download and 2.5Mbps upload.
When the user logs out from pc1, the RADIUS server sends CoA request with the new WISPr-Bandwidth-Max for pc2.
The Forti... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,860 | User & Authentication
packets: in 0 out 0, bytes: in 0 out 0
group_id: 15
group_name: group_radius
10.1.100.22, test
src_mac: **:**:**:**:**:**
type: fw, id: 0, duration: 9, idled: 9
expire: 86391
flag(814): hard radius no_idle
server: rad1
packets: in 0 out 0, bytes: in 0 out 0
group_id: 15
group_name: group_radius
--... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,861 | User & Authentication
Wired example
This example has a FortiGate configured with a hardware switch with two ports: port3 and port5. The hardware switch is
enabled with 802.1X security and assigned to a RADIUS user group. Upon a successful authentication, the RADIUS
server responds with an Access-Accept containing the a... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,862 | User & Authentication
set server "172.18.60.203"
set secret ENC **********
next
end
next
end
3. Configure the RADIUS user group:
config user group
edit "group_radius"
set member "rad1"
next
end
4. Configure the hardware switch with 802.1X enabled.
a. Configure the virtual switch settings:
config system virtual-switch
e... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,863 | User & Authentication
port3: Link up, 802.1X state: unauthorized
port5: Link up, 802.1X state: authorized
Wireless example
In this example, a virtual AP is configured with WPA2-Enterprise security with RADIUS and has CoA enabled. After a
wireless user authenticates and connects to the wireless SSID, the RADIUS server t... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,864 | User & Authentication
next
end
2. Configure the VAP:
config wireless-controller vap
edit "wifi"
set ssid "FWF-60F-coa"
set security wpa2-only-enterprise
set auth radius
set radius-server "peap"
set schedule "always"
next
end
3. Verify that the wireless station connects to the SSID:
# diagnose wireless-controller wlac -... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,865 | User & Authentication
config user radius
edit <name>
set transport-protocol {udp | tcp | tls}
set ca-cert <string>
set client-cert <string>
set tls-min-proto-version {default | SSLv3 | TLSv1 | TLSv1-1 | TLSv1-2}
set server-identity-check {enable | disable}
next
end
transport-protocol {udp |
tcp | tls}
Set the type of t... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,866 | User & Authentication
Before configuring RADSEC over TLS, make sure that the CA certificate (which issues the remote RADIUS server
certificate) is imported into the FortiGate trusted root store. If a customized local FortiGate client certificate is used, both
the certificate and private key are imported into local Fort... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,867 | User & Authentication
[565] fnbamd_rad_make_access_request-
[329] __create_access_request-Compose RADIUS request
[549] __create_access_request-Created RADIUS Access-Request. Len: 139.
...
[963] __auth_ctx_svr_push-Added addr 10.1.100.41:2083 from rad 'radius-tls'
[806] __fnbamd_rad_get_next_addr-Next available address ... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,868 | User & Authentication
# diagnose debug application fnbamd -1
Debug messages will be on for 30 minutes.
# diagnose debug enable
...
[806] __fnbamd_rad_get_next_addr-Next available address of rad 'radius-tcp':
10.1.100.41:1812.
[981] __auth_ctx_start-Connection starts radius-tcp:10.1.100.41, addr 10.1.100.41:1812
proto: ... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,869 | User & Authentication
set account-key-cert-field {othername | rfc822name | dnsname | cn}
next
end
account-key-processing
{same | strip}
Account key processing operation. The FortiGate will keep either the whole
domain or strip the domain from the subject identity.
l same: Same as subject identity field (default).
l str... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,870 | User & Authentication
Some RADIUS servers do not require a password in an Access Request, while others need a
valid password to return an ACCESS ACCEPT. If your RADIUS server requires a valid
password to return an ACCESS ACCEPT, then you can configure an MFA password for each
peer user using the set mfa-password comman... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,871 | User & Authentication
To verify the configuration:
When a user authenticates to Web mode SSL VPN using their browser, the FortiOS fnbamd daemon first validates the
certificate supplied by the user. If the certificate check is successful, the information in the SAN field of the user
certificate is used to find a matchin... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,872 | User & Authentication
1. The user initiates an SSL VPN connection to the FortiGate.
2. The FortiGate SP redirects the user to the SAML IdP.
3. The user connects to the Microsoft log in page for the SAML authentication request.
4. The SAML IdP authenticates the user and sends the SAML assertion containing the user and g... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,873 | User & Authentication
Common SAML SSO settings
Configuring the IdP is outside the scope of this topic, but to successfully configure SAML on the FortiGate the following
information must be obtained from the Identity Provider:
From IdP Description
Entity ID The identifier URL for the IdP used to identify the issuer of t... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,874 | User & Authentication
3. Click Next.
4. Configure the IdP settings:
Setting Description
Type l Fortinet Product: If the IdP is a FortiAuthenticator or FortiTrust-ID, IdP
configurations are simplified. See FortiAuthenticator Admin Guide >
Authentication > SAML IdP for more information
l Custom: If the IdP is any other v... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,875 | User & Authentication
5. Click Submit.
To configure the FortiGate SP settings for SSO in the CLI:
config user saml
edit <name>
set adfs-claim [enable|disable]
set cert {string}
set clock-tolerance {integer}
set digest-method [sha1|sha256]
set entity-id {string}
set group-claim-type [email|given-name|...]
set group-name... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,876 | User & Authentication
Setting Description
The setting is only available in the CLI.
reauth Enable/disable signaling the IdP to force user re-authentication. The SAML
AuthnRequest is set to ForceAuthn=”true”.
The setting is only available in the CLI.
single-logout-url The Single logout service URL from the SP.
single-si... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,877 | User & Authentication
To configure a custom certificate in the CLI:
config user setting
set auth-cert <custom certificate name>
end
Alternatively, assigning a CA certificate allows the FortiGate to automatically generate and sign a certificate for the
authentication daemon. This will override any assigned server certif... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,878 | User & Authentication
For a deep-dive into how to configure FortiAuthenticator as an IdP, including integration with Windows AD via LDAP for
user authentication, see the FortiGate SSL VPN with FortiAuthenticator as SAML IdP section in the FortiAuthenticator
Examples Guide.
This example also demonstrates using FortiAuth... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,879 | User & Authentication
Click the icon beside the SP entity ID, SP single sign-on URL, and SP single logout
URL fields to copy the text.
c. Click Next.
d. Enter the FortiAuthenticator IdP details:
IdP address 172.18.58.93:443
Prefix 43211234
IdP certificate REMOTE_Cert_1
e. Enter the additional SAML attributes that will ... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,880 | User & Authentication
f. Click Submit.
The following is created in the backend:
config user saml
edit "saml_test"
set cert "fgt_gui_automation"
set entity-id "http://172.16.116.151:55443/remote/saml/metadata/"
set single-sign-on-url "https://172.16.116.151:55443/remote/saml/login/"
set single-logout-url "https://172.16... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,881 | User & Authentication
e. Click OK.
The following is created in the backend:
config user group
edit "saml_grp"
set member "saml_test"
next
end
3. Add the SAML group in the SSL VPN settings:
a. Go to VPN > SSL-VPN Settings.
b. In the Authentication/Portal Mapping table, click Create New.
c. For Users/Groups, click the + ... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,882 | User & Authentication
4. Configure the firewall policy:
a. Go to Policy & Objects > Firewall Policy and click Create New.
b. Enter the following:
Incoming Interface ssl.root
Outgoing Interface port2
Source all, saml_grp, saml_test
c. Configure the other settings as needed.
d. Click OK.
5. On the client, log in with SAM... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,883 | User & Authentication
The authentication process proceeds as follows:
1. The remote client uses FortiClient to connect to the FortiGate SSL VPN on 172.16.58.92:1443 with the Use external
browser as user-agent for saml user authentication option enabled.
2. The SSL VPN redirects FortiClient to complete SAML authenticati... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,884 | User & Authentication
config vpn ssl web portal
edit "testportal1"
set tunnel-mode enable
set ipv6-tunnel-mode enable
set web-mode enable
...
next
end
4. Configure the SSL VPN:
config vpn ssl settings
set tunnel-ip-pools "SSLVPN_TUNNEL_ADDR1"
set tunnel-ipv6-pools "SSLVPN_TUNNEL_IPv6_ADDR1"
set port 1443
set source-int... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,885 | User & Authentication
e. Enable Enable Single Sign On (SSO) for VPN Tunnel and Use external browser as user-agent for saml user
authentication.
f. Click Save.
2. On the Remote Access tab select the FGT401E_SSO VPN connection from the dropdown list.
3. Click SAML Login.
The default browser opens to the IdP authenticatio... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,886 | User & Authentication
To check the connection on the FortiGate:
# get vpn ssl monitor
SSL-VPN Login Users:
Index User Group Auth Type Timeout Auth-Timeout From HTTP in/out
HTTPS in/out Two-factor Auth
1 fac3 saml_grp 256(1) N/A 10.1.100.254 0/0 0/0 0
SSL-VPN sessions:
Index User Group Source IP Duration I/O Bytes Tunne... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,887 | User & Authentication
The SAML interaction occurs as follows:
1. The user initiates web traffic to the internet.
2. The FortiGate redirects to the local captive portal port (default is 1003), then redirects the user to the SAML IdP.
3. The user connects to the Microsoft log in page for the SAML authentication request.
... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,888 | User & Authentication
3. Assign Microsoft Entra ID users and groups to the application.
To create a new enterprise application:
1. Log in to the Azure portal.
2. In the Azure portal menu, click Microsoft Entra ID.
3. In the left-side menu go Manage > Enterprise applications.
4. Click New application.
5. Click Create yo... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,889 | User & Authentication
1. On the Overview page for your new application, go to Manage > Single sign-on and select SAML as the single signon method.
2. The Basic SAML Configuration section in Azure describes the SAML SP entity and links that Azure will reference.
Configure these settings on the FortiGate by creating a n... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,890 | User & Authentication
From FortiGate To Azure field
Assertion consumer service URL
(https://10.1.0.1:1003/remote/saml/login/)
Reply URL and Sign on URL
Single logout service URL
(https://10.1.0.1:1003/remote/saml/logout/)
Logout URL
4. Click Save.
5. Under the SAML Signing Certificate section, download the Base64 certi... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,891 | User & Authentication
8. In Azure, edit the User Attributes & Claims section. The attributes are returned in the SAML assertion, which the
FortiGate uses to verify the user and group. Configuring group matching is optional.
a. Click Add new claim, name it username, and set the Source attribute to user.displayname. The ... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,892 | User & Authentication
c. Click Submit.
To assign Microsoft Entra users and groups to the application:
1. In Azure, go to the application's Overview page.
2. Go to Manage > Users and groups and click Add user/group.
3. Click Users to select the users or groups (John Locus is selected in this example).
4. Click Assign to... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,893 | User & Authentication
Configuring the user group
A user group named Azure-FW-Auth is created with the member Entra-ID-SAML.
Configuring group matching is optional, and the Object ID from Azure is needed for the config match settings. In the
Azure default directory, go to Manage > Groups and locate the Object ID for the... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,894 | User & Authentication
To assign a CA certificate:
1. Edit the user setting:
config user setting
set auth-ca-cert "Fortinet_CA_SSL"
end
2. Go to System > Certificates and download the certificate.
3. Install the certificate into the client’s certificate store.
Configuring the firewall policies
Firewall policies must be ... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,895 | User & Authentication
a. Click Create New and enter the following:
Name LAN-auth-policy
Incoming Interface port3
Outgoing Interface Underlay
Source all, Azure-FW-Auth
Destination all
Schedule always
Service ALL
Action ACCEPT
NAT Enable and select NAT.
Log Allowed Traffic Enable and select All Sessions.
b. Configure the... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,896 | User & Authentication
Viewing logs and diagnostics
To verify user logins, go to the Dashboard > Assets & Identities and expand the Firewall Users widget, or enter the
following in the CLI:
# diagnose firewall auth list
10.1.0.100, John Locus
src_mac: 02:09:0f:00:03:03
type: fw, id: 0, duration: 152, idled: 7
expire: 29... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,897 | User & Authentication
To troubleshoot SAML issues:
# diagnose debug application samld -1
# diagnose debug enable
SAML authentication in a proxy policy
SAML user authentication can be used in explicit web proxies and transparent web proxies with the FortiGate acting as a
SAML SP. SAML can be used as an authentication me... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,898 | User & Authentication
In this configuration, SAML authentication is used with an explicit web proxy. The IdP is a Windows 2016 server
configured with ADFS. The LDAP and IdP servers are on the same server. The LDAP server is used as the user
backend for the IdP to perform authentication; however, they are not required t... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,899 | User & Authentication
next
end
3. Configure the LDAP server:
config user ldap
edit "ldap-10.1.100.198"
set server "10.1.100.198"
set cnid "cn"
set dn "dc=myqalab,dc=local"
set type regular
set username "cn=fosqa1,cn=users,dc=myqalab,dc=local"
set password ************
set group-search-base "dc=myqalab,dc=local"
next
en... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,900 | User & Authentication
next
end
config authentication setting
set captive-portal "fgt9.myqalab.local"
end
7. Configure the proxy policy:
config firewall proxy-policy
edit 3
set proxy explicit-web
set dstintf "port9"
set srcaddr "all"
set dstaddr "all"
set service "webproxy"
set action accept
set schedule "always"
set lo... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,901 | User & Authentication
sessionid=1751272387 service="HTTPS" wanoptapptype="web-proxy" proto=6 action="accept"
policyid=3 policytype="proxy-policy" poluuid="052ae158-7d40-51eb-c1d8-19235c4500c2"
trandisp="snat" transip=172.16.200.1 transport=14844 duration=268 user="test1@MYQALAB.local"
group="ldap-group-saml" authserver... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,902 | User & Authentication
set member "TACACS-SERVER"
next
end
3. Configure the remote user:
config system admin
edit TACACS-USER
set remote-auth enable
set accprofile "super_admin"
set vdom "root"
set wildcard enable
set remote-group "TACACS-GROUP"
next
end
To configure a TACACS+ server in the GUI:
1. Go to User & Authenti... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,903 | User & Authentication
set scim-https-port <integer>
set scim-server-cert <string>
end
scim-http-port <integer> Specify the port on which the SCIM server will listen for HTTP requests (default =
44558).
scim-https-port <integer> Specify the port on which the SCIM server will listen for HTTPS requests (default
= 44559).
... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,904 | User & Authentication
To configure SCIM clients in the CLI:
config user scim
edit <name>
set status {enable| disable}
set base-url <string>
set authe-method {token | base}
set token-certificate <name>
set secret <passwd>
set certificate <name>
set client-identity-check {enable| disable}
next
end
status {enable| disable... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,905 | User & Authentication
Upon successful configuration, users and groups are provisioned on FortiGate. This setup can leverage SAML to
provide access to authenticated users.
To configure FortiGate as an SCIM server in the GUI:
1. Allow SCIM access on an interface:
a. Go to Network > Interfaces and edit the interface.
b. I... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,906 | User & Authentication
c. Click OK.
To configure FortiGate as an SCIM server in the CLI:
1. Allow SCIM access on an interface:
config system interface
edit port2
append allowaccess scim
next
end
2. Specify the SCIM server certificate:
config system global
set scim-server-cert SCIM-Demo-CA-SSL
end
3. Configure SCIM clien... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,907 | User & Authentication
5. Once the setting is saved, double-click the newly created entry to open the settings pane, and click Sync to
automatically add existing users to the SCIM server.
See Service providers for more information
The SCIM endpoint and access token must match the base-url and secret respectively,
as con... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,908 | User & Authentication
To add the SCIM group to a SAML server configuration in the CLI:
config user saml
edit "SCIM-SAML"
set scim-client "SCIM-server-to-FAC"
next
end
Modify the SAML user group used in the firewall policy
The configuration in this topic incorporates all the SCIM groups configured on FortiAuthenticator ... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,909 | User & Authentication
Bearer token authentication for SCIM servers
Bearer token authentication can be used for SCIM to improve security between the SCIM server and client. Bearer
tokens generated by FortiOS can be temporary or long lived, and the SCIM client can verify the token.
Use the execute gen-token command to ge... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,910 | User & Authentication
Fortinet_Factory_Backup local
Fortinet_GUI_Server local "
Fortinet_SSL local
Fortinet_SSL_DSA1024 local
Fortinet_SSL_DSA2048 local
Fortinet_SSL_ECDSA256 local
Fortinet_SSL_ECDSA384 local
Fortinet_SSL_ECDSA521 local
Fortinet_SSL_ED448 local
Fortinet_SSL_ED25519 local
Fortinet_SSL_RSA1024 local
Fort... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,911 | User & Authentication
To configure verification of the bearer token:
1. Configure the certificate name or pre-shared key to use for verification of the bearer token.
In this example, a certificate (cert) type of bearer token is configured. You must specify the same certificate used
to generate the bearer token:
config ... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,912 | User & Authentication
Common usage for FortiTokens includes:
l Applying MFA to a VPN dialup user connecting to the corporate network
l Applying MFA to FortiGate administrators
l Applying MFA to firewall authentication and captive portal authentication
The MFA process commonly involves:
l Something you know: User passwo... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,913 | User & Authentication
This section includes the following topics to quickly get started with FortiTokens:
l FortiToken Mobile quick start on page 2914
l FortiToken Cloud on page 2922
l Registering hard tokens on page 2922
l Managing FortiTokens on page 2924
l FortiToken Mobile Push on page 2926
l Synchronizing LDAP Act... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,914 | User & Authentication
Registering FortiToken Mobile
To deploy FortiToken Mobile for your end users, you must first register the tokens on your FortiGate. After registering the
tokens, you can assign them to your end users.
Each FortiGate comes with two free FortiToken Mobile tokens. These tokens should appear under Use... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,915 | User & Authentication
Provisioning FortiToken Mobile
Once registered, FortiTokens need to be provisioned for users before they can be activated. In this example, you will
provision a mobile token for a local user. Similar steps can be taken to assign FortiTokens to other types of users.
To create a local user and assig... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,916 | User & Authentication
6. Click Submit. An activation code should be sent to the created user by email or SMS, depending upon the delivery
method configured above.
FortiGate has the Email Service setting configured using the server notifications.fortinet.net by
default. To see configuration, go to System > Settings > Em... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,917 | User & Authentication
To activate FortiToken Mobile on iOS:
1. On your iOS device, tap on the FortiToken application icon to open the application. If this is your first time opening
the application, it may prompt you to create a PIN for secure access to the application and tokens.
2. Tap on the + icon. The Scan Barcode... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,918 | User & Authentication
4. FortiToken Mobile activates your token, and starts generating OTP digits immediately. To view or hide the OTP
digits, tap the eye icon.
After you open the application, FortiToken Mobile generates a new 6-digit OTP every 30 seconds. All configured tokens
display on the application homescreen.
Th... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,919 | User & Authentication
2. Tap on Touch/Face ID & PIN.
3. Enable and set up a 4-digit PIN for the application. The PIN is required to be enabled before you can enable
Touch/Face ID.
FortiOS 7.6.2 Administration Guide 2920
Fortinet Inc. | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,920 | User & Authentication
4. Enable Touch/Face ID.
You cannot enable Touch/Face ID for FortiToken if Touch/Face ID is not set up and
enabled for device unlock (iPhone Unlock in this case) on iOS. You must first set up and
enable Touch/Face ID from Settings on your iOS device.
5. When prompted by iOS, allow the FortiToken a... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,921 | User & Authentication
l MFA for wireless users via Captive Portal
l Configuring FSSO firewall authentication on page 2957
FortiToken Cloud
FortiToken Cloud is an Identity and Access Management as a Service (IDaaS) cloud service offering by Fortinet. It
enables FortiGate and FortiAuthenticator customers to add MFA for t... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,922 | User & Authentication
end
To import multiple FortiTokens to FortiOS using the GUI:
1. Go to User & Authentication > FortiTokens.
2. Click Create New.
3. For Type, select Hard Token.
4. Click Import. The Import Tokens section slides in on the screen.
5. Select Serial Number File.
Seed files are only used with FortiToken... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,923 | User & Authentication
Associating FortiTokens with user accounts
You can associate FortiTokens with local user or administrator accounts.
To associate a FortiToken to a local user account using the GUI:
1. Ensure that you have successfully added your FortiToken serial number to FortiOS and that its status is Available.... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,924 | User & Authentication
Locking/unlocking FortiTokens
To change FortiToken status to active or to lock:
config user fortitoken
edit <token_serial_num>
set status <active | lock>
next
end
A user attempting to log in using a locked FortiToken cannot successfully authenticate.
Managing FortiTokens drift
If the FortiToken ha... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,925 | User & Authentication
4. Click OK. The token will be removed from the user's Two-factor Authentication column. The user will also be
removed from the token's User column under User & Authentication > FortiTokens.
Moving FortiTokens to another device
FortiTokens can only be activated on a single FortiGate or FortiAuthen... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,926 | User & Authentication
request.
To configure FortiToken Mobile push services using the CLI:
config system ftm-push
set proxy {enable | disable}
set server-port [1-65535]
set server <ip-address>
set status enable
end
The default server port is 4433.
The server IP address is the public IP address of the FortiOS interface ... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,927 | User & Authentication
FortiOS supports FortiAuthenticator-initiated FortiToken Mobile Push notifications for users
attempting to authenticate through an SSL VPN and/or RADIUS server (with
FortiAuthenticator as the RADIUS server).
Synchronizing LDAP Active Directory users to FortiToken Cloud using the twofactor filter
... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,928 | User & Authentication
To configure a default LDAP server configuration without a two-factor filter:
config user ldap
edit "ad-ldap-auth"
set server <ip_address>
set cnid "cn"
set dn "dc=fortinet-fsso,dc=com"
set type regular
set two-factor fortitoken-cloud
set username "cn=Administrator,cn=users,dc=fortinet-fsso,dc=com... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,929 | User & Authentication
1. Gather the information to connect to the Active Directory server through LDAP. Include all necessary fields, such as
the server IP, port, CN name identifier, DN for the start of the search, bind type, and username associated with a
regular bind.
2. Consider the users or groups that require two-... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,930 | User & Authentication
Content-Length: 246
{"users":[{"username":"oliver2022","vdom":"vdom1","email":"o****@fortinet.com","mobile_
number":"XXXXXXXXXXX","user_
data":1,"action":"create"}],"sn":"FG4H1E5819900000","cluster_members":[
"FG4H1E5819900000" ],"group_name":"FGT400D","group_id":"0"}
Reminder: User sync packet n... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,931 | User & Authentication
If the free trial has not been activated, the Activate free trial button will be available.
If the FortiToken Cloud license or free trial period is expired, the status will be displayed as No active license.
After activation, license information will be displayed and a Usage field will display how... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,932 | User & Authentication
To enable the FortiToken Cloud free trial for an Administrator:
1. Go to System > Administrators.
2. Click Create new > Administrator.
3. Enable Two-factor Authentication.
4. Set Authentication Type to FortiToken Cloud.
5. Select Activate free trial. A confirmation message is displayed.
6. Click O... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,933 | User & Authentication
7. Click OK.
To enable the FortiToken Cloud free trial for a Local User:
1. Go to User & Authentication > User Definition.
2. Click Create new.
3. Configure settings as needed.
4. Enable Two-factor Authentication.
5. Set Authentication Type to FortiToken Cloud.
6. Select Activate free trial. A con... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,934 | User & Authentication
8. Click OK.
To enable the FortiToken Cloud free trial for FortiGuard:
1. Go to System > FortiGuard.
2. In the Subscriptions tab, click Available for purchase and locate the FortiToken Cloud widget.
3. Select Activate free trial for FortiToken Cloud. A confirmation message is displayed.
4. Click O... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,935 | User & Authentication
# execute fortitoken-cloud show
FortiToken Cloud service status: free trial.
Service balance: 0.00 users. Expiration date: 2022-07-06. Customer ID: 139XXXX.
3. View users associated with FortiToken Cloud:
# diagnose fortitoken-cloud show users
Number of users in fortitoken cloud: 2
1: username:vm... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,936 | User & Authentication
-rw-r--r-- 1 0 0 Sat Jan 12 00:06:30 2019 2377 apn-dev-cert.pem.save
-rw-r--r-- 1 0 0 Sat Jan 12 00:06:30 2019 1859 apn-dev-key.pem.save
-rw-r--r-- 1 0 0 Tue Jan 15 08:56:20 2019 2167 apn-dis-cert.pem <-- downloaded
from FortiGuard
-rw-r--r-- 1 0 0 Sat Jan 12 00:06:30 2019 8964 apn-dis-cert.pem.sa... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,937 | User & Authentication
CLI GUI Description
new Available Newly added, not pending, not activated, not yet assigned.
active Assigned Assigned to a user, hardware token.
provisioning Pending Assigned to a user and waiting for activation on the FortiToken Mobile app.
provisioned Assigned Assigned to user and activated on t... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,938 | User & Authentication
Recovering lost Administrator FortiTokens
If an Administrator loses their FortiToken or the FortiToken is not working, they will not be able to log into the admin
console through the GUI or the CLI. If there is another Administrator that can log into the device, they may be able to
reset the two-f... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,939 | User & Authentication
set two-factor-sms-expiry <number of seconds>
set two-factor-fac-expiry <number of seconds>
set two-factor-email-expiry <number of seconds>
end
These timers apply to the tokens themselves and remain valid for as long as configured above. However, SSL VPN does
not necessarily accept tokens for the ... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,940 | User & Authentication
Subject Alternative Name:
Certification path:
FortiOS 7.6.2 Administration Guide 2941
Fortinet Inc. | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,941 | User & Authentication
To configure a PKI user:
config user peer
edit <name>
set ca <string>
set mandatory-ca-verify {enable | disable}
set subject <string>
set cn <string>
set cn-type {string | email | FQDN | ipv4 | ipv6}
set mfa-server <string>
set mfa-username <string>
set mfa-password <string>
set mfa-mode {none | p... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,942 | User & Authentication
Subject
This basic method verifies that the subject string defined in the PKI user setting matches a value or substring in the
subject field of the user certificate. Further matching is controlled in the following VPN certificate settings.
config vpn certificate setting
set subject-match {substrin... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,943 | User & Authentication
Type Action
ipv4 Look for a match in the certificate subject, then compare the IP.
ipv6 Look for a match in the certificate subject, then compare the IP.
The CN type also controls the format checking of the CN string. In this example, if the CN type is set to email, the CN
must be in email format ... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,944 | User & Authentication
When a user authenticates to the FortiGate for an administrative log in, SSL VPN, IPsec dialup, or firewall authentication
using a user certificate, it presents a signed certificate issued by a trusted CA to the FortiGate. The following sequence of
events occurs as the FortiGate processes the cert... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,945 | User & Authentication
The configuration used in this example assumes the following:
l The CA certificate has already been uploaded to the FortiGate.
l The SSL VPN configurations have already been configured, pending the assignment of the PKI user group.
To configure the authentication settings:
1. Configure the LDAP se... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,946 | User & Authentication
3. Configure the firewall user group for SSL VPN authentication:
config user group
edit "vpn-group"
set member "peer-RFC822-name"
next
end
4. Apply the user group to the SSL VPN configuration and firewall policy.
Verification
When the SSL VPN user authenticates in a browser, the FortiOS fnbamd dae... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,947 | User & Authentication
FSSO
FortiOS can provide single sign-on capabilities to Windows AD, Citrix, VMware Horizon, Novell eDirectory, and Microsoft
Exchange users with the help of agent software installed on these networks. The agent software sends information
about user logons to the FortiGate unit. With user informati... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,948 | User & Authentication
Collector agent
The Collector Agent (CA) is installed as a service on a server in the Windows AD network to monitor user logons and
send the required information to the FortiGate unit. The Collector agent can collect information from a DC agent
(Windows AD) and TS agent (Citrix or VMware Horizon T... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,949 | User & Authentication
Since FSSO is commonly associated with Agent-based FSSO and Agentless FSSO, this chapter will primarily focus
on the first two Security Fabric External Connector options.
FSSO polling connector agent installation
This topic gives an example of configuring a local FSSO agent on the FortiGate. The a... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,950 | User & Authentication
8. There should be two new connectors:
l The Local FSSO Agent is the backend process that is automatically created when the first FSSO polling
connector is created.
l The Active Directory Connector is the front end connector that can be configured by FortiGate administrators.
To verify the configu... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,951 | User & Authentication
Troubleshooting
If an authenticated AD user cannot access the internet or pass the firewall policy, verify the local FSSO
user list:
# diagnose debug authd fsso list
----FSSO logons----
IP: 10.1.100.188 User: test2 Groups: CN=group2,OU=Testing,DC=Fortinet-FSSO,DC=COM
Workstation: MemberOf: CN=grou... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,952 | User & Authentication
This output contains a lot of detailed information which can be captured to a text file.
Limitations
l NTLM based authentication is not supported.
l If there are a large number of user log ins at the same time, the FSSO daemon may miss some. Consider using
FSSO agent mode if this will be an issue.... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,953 | User & Authentication
Username Field User <{{:username}}>
Client IPv4 Field IPv4 Address <{{:client_ip}}>
Client IPv6 Field IPv6 Address <{{:client_ipv6}}>
Group Field Group <{{:group}}>
Groups List Separator ,
c. To test the rule, enter a sample log line, then click Test.
d. Click OK.
8. Create a new syslog source:
a.... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
2,954 | User & Authentication
Connect to a remote LDAP server
This section describes how to connect to a remote LDAP server to match the user identity from the syslog server with an
LDAP server.
To connect to a remote LDAP server:
1. Open the FSSO agent on Windows.
2. Click Advanced Settings.
3. Go to the Syslog Source List ta... | https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3afdbab8-dcdc-11ef-8766-ca4255feedd9/FortiOS-7.6.2-Administration_Guide.pdf |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.