prompt stringlengths 1 58.2k | completion stringlengths 1 53.1k |
|---|---|
Hello, I'd like to know how its possible if there isn't installed exim4 on my system, please look at my image: Thanks for the answer! | phoenix_art wrote:Originally my problem is I would like to use psad without exim4 on my system but I can't reinstall psad with this option yet. Any suggestions? If you don't need MTA-specific tasks, such as queuing, etc. and you just want to be able to send e-mails via a mail relay, I can recommend nullmailer. The conf... |
Hi, I was using Debian 9 with no network problems, installed Debian 10 (with non-free firmware like I always do) in place of it, and the wifi network started not working. It even sees the networks but doesn't connect to it. In the installation it showed it as a problem of not recognizing DHCP. I then installed Linux Mi... | desbian wrote:I tried to remove MAC address randomization How exactly were you randomising the MAC address and how did you remove this configuration? Perhaps check the router, mine ran out of slots to assign when I randomised the MAC address in my Debian buster box and would not allow it to connect until I deleted some... |
As root I can easily show which VM's are running with the command "sudo virsh list --state-running" or "sudo virsh list --all" Code: Select allpeer@debian:~$ sudo virsh list --state-running [sudo] password for peer: Id Name State -------------------------- 1 Debian10 running How can I get the same information as user w... | Code: Select all$ virsh --connect qemu:///session list --state-running ...or just -c |
Dear All, Please also refer to this http://forums.debian.net/viewtopic.php?f=5&t=146620 I run debian stable+backports on my system. Below is my source list Code: Select all$ cat /etc/apt/sources.list deb http://httpredir.debian.org/debian stable main contrib non-free deb-src http://httpredir.debian.org/debian stable ma... | Finally, it was easier to remove *cuda* and *nvidia* and reinstall again following the wiki. No need to challenge the gods of nvidia with a direct update! |
Hello, I've used Ubuntu in the past and have moved just now to Debian for first time. The internal wireless on my laptop does not work, so I bought a wireless adapter that's supposed to be Linux compatible. The model is TL-WN725N (tp-link) I've discovered the manufacturer does not provide an official driver for Debian.... | You have a bit of a mix up in your sources list. Bullseye= Testing Buster= Stable Don't mix your Repositories. |
Hello. I installed Debian 10, LXDE, i386 on computer DELL latitude d610. WIFI is BCM4318 Previously I had on the same computer Debian 7 Wheezy installed in 2016 if I remember correctly. I remember that at that time I had a lot of trouble to make the wifi work but I don't remember any more how I achieved this. On beginn... | https://wiki.debian.org/WiFi/HowToUse#W ... d_WPA2-PSK EDIT: I think wicd might ignore the interface if it's listed in /etc/network/interfaces so if you want to use that instead of ifupdown then just remove your erroneous configuration attempt from that file. |
This is a summary of wht has been done. Copied the latest 10.7 netinst iso to USB stick using: Code: Select alldd if=netinst.iso of=/dev/sdc;sync The stick worked like a charm, exactly as a CD. Installationi finished successfully, I started it under Secure Boot, that is what this firmware calls UEFI. However the hard d... | ckosloff wrote:I think I have to fix GRUB but don't know how to do this. That's where I'd start. Do you even have Grub? Did you install it in the right place? I ask because I once managed to install grub to a different drive. |
Dear All, Apologies for the long post. Right now on my box (debian stable) I use a rather seasoned graphic card. Code: Select all$ lspci | grep -i --color 'vga\|3d\|2d' 05:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 630] (rev a1) I do not use it for gaming or gpu computing. I have nothing from ... | The GTX 1070 is supported by the standard non-free 418.113 driver in the non-free section of the Debian repos. Install and run nvidia-detect first to confirm that, then install per the wiki: https://wiki.debian.org/NvidiaGraphicsDrivers For CUDA, follow the wiki instructions. |
Cannot install virtualbox and I need it, please help Code: Select allroot@crosshair:/Data/Downloads/vbox# dpkg -i virtualbox-6.1_6.1.16-140961~Debian~buster_amd64.deb Selecting previously unselected package virtualbox-6.1. (Reading database ... 191898 files and directories currently installed.) Preparing to unpack virt... | stevepusser wrote:Since beginners probably have no idea True enough but OP joined in 2011 and has 489 posts. At what point do you progress from beginner to help vampire? |
So i am pretty sure i installed this system using uefi but on another computer I have since moved the hard drive to another compuetr. The first inkling that things weren’t right was when I booted into the BIOS to find the drive is not seen in UEFI but only when Legacy mode is also included. It boots in Legacy mode. The... | I tend to doubt that you installed efi the first time. For that, you need two FAT32 partitions, one for /boot and one for /boot/efi. You show only a boot partition. I'm far from expert on this, but I think you need to repartition to get efi to work. |
Hi I noticed that some IPs are trying to connect to my IMAP/SMTP server (SASL) many times but in a larger time frame than the usual 5-15 minutes window, so I decided to have two jails for these services : one jail for the small time frame that will look for 3 failures in 5 minutes and one for the large time frame (a da... | Can't investigate this anymore anyway, config has changed. |
Dear Debian, Some of postfix logs are missing from both /var/log/mail.log and /var/log/syslog. The missing log lines are from qmgr and smtpd. Those two services were running in chroot, but then Viktor Duchovni suggested I run them unchrooted, which I did. I change master.cf file accordingly (putting the n in the right ... | Can't really remember how I solved this. |
Hi all. I've just installed a fresh Buster (debian 10) on a dell studio 1555 (using the netinst non-free CD image) and the install went perfectly. I've edited /etc/network/interfaces to add a stanza for my "Qualcomm Atheros AR928X Wireless Network Adapter (PCI-Express)" nic (pci id: 168c:002a), thus: Code: Select allau... | Try to change the first line Code: Select allauto wlp4s0 to Code: Select allallow-hotplug wlp4s0 I am not sure, that it will help you (but it cannot harm). |
Dear All, I made a mess and I need some help Below you can find the configuration of my box until not long ago. Code: Select all$ df -T Filesystem Type 1K-blocks Used Available Use% Mounted on udev devtmpfs 16380328 0 16380328 0% /dev tmpfs tmpfs 3281684 9736 3271948 1% /run /dev/sdc1 xfs 68324768 23748600 44576168 35%... | /dev/dis..85287b21f7f9 This may be the UUID of the original format. When you reformatted to xfs the part was given a new uuid. I assume you somehow copied over the original files, and expected it to boot. If you are getting to grub, and seeing this error as the system tries to load your ok. You need to record the new u... |
On Debian stable I find that if I fat-finger the password while trying to SSH into another Debian box that I am completely locked out of that machine for a period, maybe 5-10 minutes. That means that I can not ping the computer I am attempting to ssh in to, the terminal tab that I am attempting to log in from is frozen... | Do you control the server? Did you install fail2ban, ssh-guard or any such tool? If yes, you may have to make the settings a bit less extreme... |
I noted a recent update removed "libvirt-daemon-system" and now when I start Virtual Machine Manager the list of my VM's is missing and instead I see QEMU/KVM - Not ConnectedIf I go to re-install libvirt-daemon-system I get a popup of additional changes required. It is going to remove nftables and install firewalld ips... | Ahhh, specify a little better...upgraded what? What release? libvirt-daemon-system requires iptables, check if installed. Also check #libvirtd output for a line ...Authorization: Action org.libvirt.unix.manage is not registered |
I am refurbishing an old Lonovo x130e Thinkpad for a friend which i don't use anymore. I installed Debian 9 xfce on it, since it light weight on ram. I can log in fine, but when i put the laptop to sleep (suspend), when i wake it up and login, the login screen appears fine, but after i enter the user name and password,... | manny6 wrote: But if i use Code: Select allsudo skill -KILL -u root from user account it must kill root processes, was forced out of user account, and when i get back in, no icons just blank page. Some kind of nonesense. How can a simple user, with increased privileges finish the root process? It may be that I'm wrong,... |
Hello, I'm very new in LAMP and Wordpress so please don't laugh too much So I followed this guide: https://wiki.debian.org/WordPress (first basic setup, then used script) and somehow I managed to get my home server and my Wordpress site up: "Just another WordPress site", "Hello World!", wow... but. There is always some... | If your wordpress vhost is not the default one on the server, check the 'server name' directive in the vhost definition matches what you are requesting when connecting "locally". Either add a 'server alias' that does, or use a local DNS or hosts file entry to map the server name to local ip. |
Hi, I have just installed Debian Buster after a number of years with other distributions. I am getting a problem (and I am guessing it's samba) where I can see (and use) our Windows10 box's shares, but I cannot access it's printer. This has worked fine for a number of years using Mint but has often been the last proble... | further to this:- I have enabled netBIOS over TCP on the windows machine I have altered the Windows Group Policy to allow insecure logons. The following looks kinda odd:- (Different results depending on if I use the IP address or the netBIOS name ?? the 2nd example does not error but it also does not show a server or a... |
Hello everybody, I would like to send manually a NDP advertisement. I tried the ndsend package for this purpose. But I can't achieve my goal. I would be glad if somebody could give me a hint. My source address which I defined in /etc/network/interfaces is Code: Select allfd53:aaaa:bbbb:2::56 I must send a neighbor adve... | isochor89 wrote:My approach was a redirection of the outgoing ff02::1 to fd53:aaaa:bbbb:2::57 You don't want to do that. Really. It may break IPv6 connectivity with other hosts. The PREROUTING chain is for incoming packets, not outgoing. The REDIRECT target is for redirecting to the local host. Stateful NAT (SNAT, DNAT... |
Hi, Since some days ago, Stretch apt command, freeze during udate process or takes much longer than normal to download changes in debian sources . sudo apt-get update Ign:1 http://deb.debian.org/debian stretch InRelease Des:2 http://security.debian.org stretch/updates InRelease [53,0 kB] Des:3 http://deb.debian.org/deb... | bester69 wrote:Err:13 https://mega.nz/linux/MEGAsync/Debian_9.0 ./ InRelease Connection timed out after 120001 milliseconds does the freeze last for around 2 mins? |
Hello. I've just used the netinstall iso of Debian 10 to make a Fluxbox-fronted system with minimal and light applications. I've used Wicd instead of Network Manager, and though it is working very well I would like its taskbar applet to appear consistently on the taskbar - it does if wicd-gtk is started manually now, t... | https://wiki.debian.org/Xsession#User_configuration |
Hi!I first installed Windows 10 and Debian Buster 10 64 bit on my machine. Unfortunately when I restart my machine its Windows 10 that boots up first.To be able to boot Debian first I have to press F9 during machine startup which brings me to the boot manager as shown in image below and I select Debian OS as the second... | Use "efibootmgr" when booted into Debian, first issue the command alone to see the current order (see the line "BootOrder") and then (after reading the man page) you can change the order to suit your needs. |
I have Windows 10 and Debian 10.5 Buster 64 bit machine installed as a dual boot system on my machine. I formatted my main data partition as NTFS so that both Windows and Debian could access the partition with read/write access. The last time I used my machine I was on the Windows 10 OS and I shutdown the machine.When ... | There have been a few threads about this previously. The solution is to disable Windows "Fast Startup". https://www.windowscentral.com/how-disa ... st-startup I actually tested Win10 with this both enabled and disabled. With it enabled it cut a whole 2 seconds off startup time, but took at least 5 seconds longer to shu... |
Hello, I have to install a package on several dozen machines. This package asks several questions during its installation (it's to join a Debian machine to a Windows network, with winbind/kerberos). I'd like to have this package install without me having to type the same answers to these questions on each machine. I ha... | fdelente wrote:if I do a dpkg-preconfigure, is there somewhere a file that is created with the answers to the questions, so that I can then copy this file on another machine and have the package install non-interactively? See debconf.conf(5). |
does anyone can help me installing the missing library libgfortran.so.3 when I'm trying to run a fortran executable (namely, aermet.x) that was compiled under a previous machine I've got the following error message: Code: Select all./aermet.x: error while loading shared libraries: libgfortran.so.3: cannot open shared o... | maxbre wrote:apparently libgfortran.so.3 is no longer supported, any other way to deal with the problem? 1. Best option: Recompile the program against new version of the library. 2. If You don't have the sources: - download the libgfortran3 package from stretch (for Your architecture, ofc) - unpack the package and copy... |
Hi!I have Debian Buster 10.4 installed on my machine. During my first installation of the Linux OS,I allocated too small a size to the /home ext4 filesystem /dev/sda6 and its fast getting filled up and I had hoped to extend it by taking some storage from physical volume /dev/sda7 thats part of a volume group and logica... | Information missing. Please post the output of the following commands run as root. Code: Select allvgs lvs lsblk df -hT -x tmpfs -x devtmpfs |
Hi!I have Debian Buster 10.4 installed on my machine. Yesterday,when I checked my / mount point using df -h command it showed value of 14.2 GB used which tallied with the value of Disk Usage Analyzer. I moved about 6.8 GB of data between partitions and now if I check the current value of df -h its showing / has risen b... | LE_746F6D617A7A69 wrote:use df -hH df -H is enough. Possible causes for missing disk space include : - filesystem inconsistency - files deleted but still opened - files hidden under a mount point - files in a location the user does not have permission to read. |
Dear all, i use pam_mount to mount a cifs share. As the share contains directories that are readable for different groups i need to be sure that new files/directories are created with different gid, depending on the default ACLs on the server. Problem is: cifs_mount mounts samba shares always with the forcegid-option, ... | Sometimes i act incredibly stupid. It's options="noforcegid,uid=%(USER)", not "options="noforcegid uid=%(USER)" |
Issue: When in Thundar (on XFCE - Debian 8.2) and I click the "Network" icon in the left sidebar the following message is displayed. Failed to open "/ on". Specified location is not supported. I configured eth0 according to the manual instructions for a static IP in /etc/network/interfaces on the Debian Wiki. I can use... | I may be barking up the wrong tree here, it's been a while since I used XFCE... do you have gvfs-backends installed? IIRC Thunar uses gvfs for 'virtual' (e.g. network) filesystems, and (again IIRC) the xfce-desktop task installs only gvfs, but not the gvfs-backends package. Failing that, does samba/cifs browsing work w... |
Following on from this post: http://forums.debian.net/viewtopic.php?f=5&t=146890 is seems I am not seeing the message I was seeing because the process that builds initrams is missing/leaving out the motd file which has the message in it. So my question is what has changed to move/delete this file, or to cause the initr... | Another one, http://forums.debian.net/viewtopic.php? ... 90#p725137 Maybe instead of starting a new thread, and then referring back to the original, just answer what is asked there, your responses are needed to determine what has changed, etc. See: http://forums.debian.net/viewtopic.php?f=30&t=10653 Forum guidelines. P... |
system: Debian 9 lxde minimal with networkmanager Wifi does work on my old toshiba laptop with linux-image 4.9.0.13-686-pae. When I change to linux-image 4.9.0.13-RT-686-pae wifi does not work anymore. Networkmanager sais that Wifi Networks is disconnected. When I change back to linux-image 4.9.0.13-686-pae wifi works ... | What wifi card do you have and what did you do to get it working for the non RT kernel? If your card required you to build a module from source, you must do it again for each kernel. |
Hi, I am using Debian Buster LXDE. To solve the following problem, I searched this site, Debian Wiki and Google; to no avail. The most I can get is, e.g., https://stackoverflow.com/questions/725 ... ble-change Neither worked.... Probably I am too dumb to unserstand the subject. I would be very grateful if somebody coul... | Because sbin contains programs and scripts only executable by root. That's why it's not in the PATH of normal users. When you use sudo, sbin will be in the PATH because sudo uses the root PATH variable. |
Dear All, Something a bit funny seems to be going on on my machine running debian buster. These are the installed kernels as of a few days ago. Code: Select all$ dpkg --list | grep linux-image | grep ii ii linux-image-4.19.0-9-amd64 4.19.118-2+deb10u1 amd64 Linux 4.19 for 64-bit PCs (signed) ii linux-image-5.7.0-4.1-li... | larry77 wrote:I noticed that even if I forget to clean up the old liquorix kernels, which get updated often, I never have more than 2 or 3 showing up. Do you run apt(-get) autoremove ? It does just that. |
On a bullseye update I got these warnings: Code: Select allSetting up linux-image-5.6.0-1-amd64 (5.6.7-1) ... I: /vmlinuz.old is now a symlink to boot/vmlinuz-5.4.0-4-amd64 I: /initrd.img.old is now a symlink to boot/initrd.img-5.4.0-4-amd64 I: /vmlinuz is now a symlink to boot/vmlinuz-5.6.0-1-amd64 I: /initrd.img is n... | ticketman wrote:Could anyone explain why firmware-linux does not have the required binaries? firmware-linux is a meta-packages which does not contain any firmware file. It only depends on other firmware packages. However it does not depend on firmware-realtek which contains firmwares for some Realtek chips. ticketman w... |
Hey everyone, I got a question about Debian and KVM.... Currently I am running CentOS 7 on my box and hosting a bunch of VMs on KVM (fileserver / plex server / pfSense / etc). Love CentOS, however it is using QEMU v1.5.3 (if I remember correctly). CentOS 8 runs v2.x.x which allows for UEFI VMs. While I love running Cen... | I've used this before with some success. It's not amazing—a little buggy—but mostly usable. https://github.com/foxlet/macOS-Simple-KVM |
Hello and thank you for your help I have tried to setup a Virtual Machine in qemu to install Windows 10 I have successed to launch the virtual machine, to install Windows 10 and to connect it from a remote SPICE client But I have successed only without VGA Passthrough !!! Once I try to give the virtual machine a graphi... | kaldtismann.deb wrote:Once I try to give the virtual machine a graphic card it's not possible to access the machine with SPICE client and the process is completly blocked ! Why not? Should I take this to mean the vm does boot up on the passed gpu and does show a display? If so, a virt-viewer window should work. On the ... |
With the below HDA-Intel and USB-Audio after most boots the order can change from 1 to 2. One boot HD-audio realtec is 1 next boot it can change to 2 and vice versa. I have seen this in the past with Debian even when I was using a USB dac. Is their away to stop this from happening. As it stuffs up my default sound devi... | https://wiki.archlinux.org/index.php/Ad ... sound_card |
Hi all, I need to upgrade an Apache2 server to security reason. I have searched online, but I did not find a way to update Apache2 web server on a Debian server. Can anyone suggest the right way? Thanks so much | Also worth nothing that the stable version receives support from the Debian Security team, so will be much more "secure" than the one from backports (which you'll need to manage yourself). |
Hi All, I had a working install of Debian that I have been using for months. Today, I installed Ubuntu alongside it in a dual boot setup. Now, when I boot the computer, it gives me the option to boot to Ubuntu or Debian. If I choose Ubuntu, it boots to Ubuntu just fine. If I choose Debian, it boots to a blank screen. W... | Please post the full content of /boot/grub/grub.cfg in your Ubuntu system. Be sure to use code tags because it will be quite long. Why did you let the Ubuntu installer change the bootloader? It would probably have been better to leave the bootloader alone and just update it from Debian after installing Ubuntu. |
i am trying to get into my samba server from my laptop (running solus linux) Code: Select all$ smbclient -U kodi -L 192.168.1.102 Unable to initialize messaging context Enter WORKGROUP\kodi's password: Sharename Type Comment --------- ---- ------- print$ Disk Printer Drivers kodi Disk IPC$ IPC IPC Service (Samba 4.11.0... | Try this as it it is likely a general SAMBA problem. Edit: /etc/samba/smb.conf And then add the following line anywhere in the file: Code: Select allclient max protocol = NT1 source: https://www.dedoimedo.com/computers/ubu ... hares.html |
I have installed ufw, but when I try to enable it in the terminal as root I get: bash: ufw: command not found I have tried uninstalling and reinstalling, to no avail. Any ideas? | Not found means not found, as in perhaps having a different path than the non-root user. Try executing the command with the full path, for instance /usr/sbin/ufw status verbose |
In Debian 10, When I start timidity as alsa sequencer with a normal user, no problem at all. It works flawlessy. Code: Select allsamuele@INSPIRON-17:~$ timidity -Os -iA Requested buffer size 32768, fragment size 8192 ALSA pcm 'default' set buffer size 32768, period size 8192 bytes TiMidity starting in ALSA server mode ... | Code: Select all# pulseaudio --start W: [pulseaudio] main.c: This program is not intended to be run as root (unless --system is specified). # pulseaudio --system W: [pulseaudio] main.c: Running in system mode, but --disallow-exit not set. W: [pulseaudio] main.c: Running in system mode, but --disallow-module-loading not... |
i'm having a distinct difference in boot times between 2 kernels. So this is the gold standard at the moment (5.2.0-21.2-liquorix-amd64) Code: Select allmac ~ # systemd-analyze Startup finished in 38.197s (kernel) + 18.085s (userspace) = 56.283s graphical.target reached after 18.076s in userspace mac ~ # uname -r 5.2.0... | milomak wrote:arzgi wrote:milomak wrote: is there a way i can export the data to a spreadsheet? Sure. For example in LibreOffice calc, paste special, space as separator. I had to do some handwork, because it shifted ms one cell to right. i see i can but it seems the second thing is not recognised but nonetheless. how c... |
On my guest image I've installed nfs-kernel-server and nfs-common, edited my exports but when I check the status I see the following? Where can I look for the 'exit-code' (or more) to sus the reason? Code: Select all$ sudo service nfs-server status ● nfs-server.service - NFS server and services Loaded: loaded (/lib/sys... | did you check journalctl and syslog? are you sure the network is up? |
Hi bought an Asus TUF Gaming FX705DY_FX705DY for Debian only use. I did not get buster witch the Xserver to run on this notebook. So I used: Debian GNU/Linux bullseye-DI-alpha2 "Bullseye" - Unofficial amd64 NETINST with firmware 20200315-11:07 The insallation worked with ethernet and dhcp so After Installation it stope... | Enter "RTL8821CE debian" into your favourite search engine. You should done that before opening a thread here: http://forums.debian.net/viewtopic.php?f=30&t=47078 And you can probably get your machine working with the stable release by installing the kernel & AMD firmware from the buster-backports repository: https://b... |
Hi there, I have tried to change env. default variable LANG. I added LANG=C to /etc/environment file, nothing change default variable still works after restart. Than I added LANG DEFAULT=C OVERRIDE="" to /etc/security/pam_env.conf, but nothing change after restar. I had to use "update-locale LANG=C" and new value was a... | rastoku wrote:Why system does nothing with changes in /etc/environment and /etc/security/pam_env.conf Looks like /etc/default/locale overrides the setting in /etc/environment. I export a few variables through /etc/environment and they work for me. |
I have a pretty specific question. I am trying to get my Debian based computer to connect to a Meraki MX100 Firewall Client VPN. I can connect to it with a Windows Laptop and my iPhone. It is using L2TP/ipsec with a shared key. It states this on the configuration page in the Meraki: Meraki's client VPN solution uses L2... | https://meikle.io/technology/cisco-mera ... -1904.html ? |
Hi, Debian 7.3 is my first Debian and i am not a professional in linux, only have used desktop ubuntus in the last few years. I'm studying linux more seriously now, i installed several linuxes including Debian 7.3, which was the last to be installed and installed grub. I tried to password protect grub like this: I did ... | sybok wrote: What is the correct file, or the correct commands, to password protect grub boot in Debian 7.3? . Debian 7.3 uses grub2, i've updated the title of the topic to make it easy to find this information. I found the solution here: https://help.ubuntu.com/community/Grub2/Passwords Also as a full tutorial on grub... |
Hi, I haven't been able to run the upgrade commands since this morning Code: Select allroot@debian02:/home/manu# apt full-upgrade Lettura elenco dei pacchetti... Fatto Generazione albero delle dipendenze Lettura informazioni sullo stato... Fatto È utile eseguire "apt --fix-broken install" per correggere ciò. I seguenti... | you are running sid, you should know better. wait a day or two then try again or read the error and fix it. |
I installed tor using "apt install tor". I am using debian 10. Also tor does not appear in the gnome's application menu, I must launch it from the cli: Code: Select alltor Mar 21 22:10:24.019 [notice] Tor 0.3.5.10 running on Linux with Libevent 2.1.8-stable, OpenSSL 1.1.1d, Zlib 1.2.11, Liblzma 5.2.4, and Libzstd 1.3.8... | There is no torbrowser-launcher package for buster, use the versions from buster-backports instead. And tor is autostarted so you don't need to launch it manually or select it from a menu. |
I may remember this wrong but I think I always could set-up Debian with a readily configured webserver including phpMyAdmin. This time I forgot to select the option when installing the system. So I had to install it later on. It was a smooth ride to install the Apache server, MariaDB and PHP. But this is not true for p... | The phpmyadmin package was removed from buster before it was released as Debian 10 because the tcpdf build-dependency was missing thanks to https://bugs.debian.org/cgi-bin/bugrepo ... bug=915286 There are some efforts ongoing to port the testing/unstable versions to buster-backports: https://salsa.debian.org/phpmyadmin... |
Im trying to figure out how to change format on my last partition - sda8 - currently formattet with ext4 (/usr) Goal - would like to be able to map drives from windows and save windows files on the partition. Have installed ntfs-3g support and tried formatting using Code: Select allmkfs.ntfs -f /dev/sda8 as root, but g... | You cannot seriously want to reformat /usr into NTFS ? |
Hello, I'm trying to install amdgpu drivers for amd a10-7800 CPU on Debian Testing .. I've installed "xserver-xorg-video-ati xserver-xorg-video-amdgpu" and graphics/X still fails due to missing drivers. On last stable Debian I only had to do "apt install firmware-linux" for the same CPU/graphics. But, now when I try wi... | questlinq wrote:I'm trying to install amdgpu drivers The amdgpu drivers are already included in the kernel, no need to install anything. Confirm this with Code: Select alllspci -k | grep -iA3 'vga\|display\|3d' questlinq wrote:I've installed "xserver-xorg-video-ati xserver-xorg-video-amdgpu" You don't need xserver-xorg... |
Hello everyone I installed Debian 10 on my computer. I’ve two computers but on this one the graphic seems like massive …. I mean the resolution is really big compare to the other one. It seems like it doesn’t have the right drivers My compute is a HP 250 G6 Notebook, Intel Core i5-7200U, 2,5 - 3,1 GHz, 3 MB Cache, 4 GB... | It is still unclear what you mean by "massive" or "big". The resolution is just as it should, equal to the native screen resolution. Are you talking about the font size ? |
Hi, I don't know where to start. Everything was alright a couple of days ago. I had installed a basic Debian (Jessy) from a minimal image (netinst) in order to install a LAMP stack. Everything was working as expected: with Debsecan, Fail2ban or Munin sending emails to /var/mail/<user>. Then, I installed mSMTP and I sta... | good question. Somewhere in exim4 stuff. Look at /etc/exim4/exim4.conf.template. ### transport/30_exim4-config_mail_spool # This transport is used for local delivery to user mailboxes in traditional # BSD mailbox format. # mail_spool: debug_print = "T: appendfile for $local_part@$domain" driver = appendfile file = /var... |
Alright. I've finally gotten the network share working and a test file uploaded to the Library in my fit-PC. I've installed mpd and icecast2 as well as mpc, though I'm not sure if I need that or not. I've found a number of tutorials for this process but they vary widely and are very inconsistent and often also very old... | Looks like you don't need icecast at all: https://wiki.archlinux.org/index.php/Mu ... _streaming Disclaimer: I've never actually tried this. |
Hi! It seems I somehow broke my nftables during the last few days on my Debian Buster remote Server. Everything has been working really well up to this point and now all of the sudden systemd always fails upon starting my nftables.service: Code: Select allroot@XXXXXX:~# systemctl start nftables.service Job for nftables... | @MediumRar, To me it looks like you're not loading the nftables modules? Check with "lsmod" if you have nf_tables (and probably a bunch of others). My server has: Code: Select all# lsmod | grep nft nft_masq_ipv4 16384 1 nft_masq 16384 1 nft_masq_ipv4 nft_chain_nat_ipv4 16384 2 nf_nat_ipv4 16384 2 nft_chain_nat_ipv4,nft... |
I have debian 10.3 installed on a fit-PC3 device on a 4GB SD card. When I type in ip a in the terminal it says my wifi is wlp5s0 and it says the state is DOWN. I've found this tutorial for it but when I use their command iwlist wlp5s0 scan | grep -i ssid to scan for networks it says the device does not support scanning... | Huecuva wrote:When I type in ip a in the terminal it says my wifi is wlp5s0 and it says the state is DOWN Please post verbatim command output rather than vague descriptions. Huecuva wrote:I've found this tutorial That "guide" is utter nonsense, don't use it. See https://wiki.debian.org/WiFi/HowToUse#W ... d_WPA2-PSK in... |
I have a fit-pc3 device that I have installed debian 10.3 headless on a 4GB SD card and I have a 160GB 2.5" HDD I would like to use for storage in it. This drive exists, and the lsblk command lists it as sda with 10 partitions. When I tried fdisk /dev/sda it says no such file or directory. When I type fdisk -l it lists... | fdisk is in /sbin/ . Maybe you didn't switch to root the correct way before running it ie. su - . See http://forums.debian.net/viewtopic.php?f=16&t=142973 Or maybe not as that usually gives "command not found". @HOAS - DLN has kindly stickied that topic after my request seeing as it comes up so often. |
So I'm still working on this fit-PC3 device. I mentioned before that I have a 160GB HDD that I am using as storage. It will contain all the MP3s that this thing will be streaming with MPD and icecast. It is formatted with ext4 and I have it auto mounting in fstab to <path/to/mount>. The goal is to have this folder shar... | https://serverfault.com/questions/87916 ... with-samba On a private LAN I don't bother with this stuff. I also use a Windows administrator account and password to login from the Linux side. Use gpe-msc and also check/set your Windows firewall. Also just because the share folder shows up in Windows doesn't mean that Sam... |
os: debian testing kde I do have a hp network printer that is automatically installed during the install process of Debian. This printer did work fine for several months. Today I noticed that the printer failed to print. So I tried to remove the printer and add the printer manually. But when I remove the printer it is ... | There is a system service called cups-browsed which will detect all printers in reach and install them automatically. Yes, this can lead to doubles. My suggestion is to stop and disable this service so it stops doing that. Code: Select allsudo systemctl stop cups-browsed sudo systemctl disable cups-browsed You can stil... |
I've ran sudo apt-get update && upgrade, after rebooting, I am unable to access most of the websites. ERR_NAME_NOT_RESOLVED is the error message I get. I can't google the error and try to fix it by trying things as the sites won't open. Google itself does work. From the snippets I could figure out that it must have som... | Coulomb wrote:Code: Select allphil@debian:~$ ip a 2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 0c:9d:92:c2:d7:5e brd ff:ff:ff:ff:ff:ff inet6 2003:e3:2f27:fc16:b174:775e:9015:c08e/64 scope global temporary dynamic valid_lft 604292sec preferred_lft 85715... |
Installed Debian 10 on the Lenovo T60 using the firmware netinst for i386. During install chose WIFI as the preferred internet connection. After installation was complete there were issues with getting a connection. I had to change the NetworkManager.conf from manage=false to manage=true. That confuses me a bit as on a... | You can disable avahi-daemon: Code: Select allsystemctl stop avahi-daemon.service systemctl disable avahi-daemon.service |
Good night, fellow sysadmins I've been bashing my head against the keyboard all Sunday long over this bizarre issue. Tried strace'ing things, tail -f'ing syslog and messages. And, hell, I've even spent an hour looking at ominous tcpdump output, to no avail. Thing is: at my workplace, we had an Debian Jessie, running ZF... | Well, nervermind. Seems like I got it. Initially, I've copied over the keytab file from the old server and added a few other keytabs to it. Now, I removed "nfs/nfs.domain" and "host/nfs.domain", then re-added them, thus increasing the kvno. Everything's working fine, now, it seems. |
I have a small network at home, all computers can see the shares of each other and even share printers, my Debian computer see the shares but can´t access them "there is a message about a list from server invalid" All other computers can access the shares but not my Debian share, and my Debian cant access them, I think... | I solved it, there was the SMB protocol was set to low, now it is working. |
I have installed debian wheezy on old computer. I cannot configure wlan interface using network manager. I cannot set Ad-Hoc setting in options. The save button is grayed and I cannot click save. What can I do? | You will most likely have to build the driver for that chip as it is not in the kernel for Wheezy. Follow instructions here - https://github.com/Mange/rtl8192eu-linux-driver |
Hello, I'm currently on Debian Sid. I decided to convert my /home (who is on dedicaded hdd) to luks2 without formatting (with cryptsetup-reencrypt --new). So that's what i've do in order : Boot into Debian Live Then type the command> - e2fsck -f /dev/sdc3 - resize2fs -M /dev/sdc3 - cryptsetup-reencrypt --verbose --debu... | SkilleR666 wrote:fstab>UUID=0d248680-8417-4f9e-9d9b-8218d90be52f /home ext4 defaults,errors=remount-ro 0 1 You do not need to use the filesystem UUID in fstab, you can use the device-mapper name /dev/mapper/home-encrypted instead. SkilleR666 wrote:crypttab :home-encrypted UUID=0d248680-8417-4f9e-9d9b-8218d90be52f none ... |
It seems like XScreensaver takes my computer as idle when it doesn't get mouse input, even as I send input from my game controller. | As Root Code: Select allapt purge xscreensaver ? |
Is it possible to have multiply keyboard layouts in console and to have key combination to switch between them? | It is possible to use loadkeys(1) to change keyboard layout on the fly (i.e. without changing system configuration): - package console-data must be installed - you have to allow your user to use loadkeys (see https://unix.stackexchange.com/question ... ormal-user) - there may be security concerns (that's why loadkeys d... |
Recently (not sure exactly when this started) cron jobs started running twice. I was on 9.x and had no issues, but upgraded to Buster (10) and had no issue (yet) eventually upgraded to 10.1 and then 10.2 and the problem seemed to start. At first, cron.hourly (which has ONLY the .placeholder ) was erroring and sending a... | w4kh wrote: A final thought: the machine is on 24/7, so anacron really isn't needed. What REALLY is the impact of purging the anacron package? Code: Select all$ aptitude show anacron ... clip.. This package is pre-configured to execute the daily jobs of the Debian system. You should install this program if your system ... |
On my machines I use English but now I am using another not mine pc with debian 9 and 10 with Italian language. Maybe is that the problem? A lot of commands do not work, why? Code: Select allupdate-grub command not found (written in Italian) reboot command not found poweroff command not found | http://forums.debian.net/viewtopic.php?f=16&t=142973 |
Hello, yesterday I installed Debian 10 kde on an old Acer X3300. Everything works fine but when I connect the hdmi-output to my tv I see the following message on my tv: "not supported". So there is a hdmi signal on the tv but the tv does not understand it. When I google this problem I find that this problem could be ca... | Try Fn + F7. (Your computer may use a different key, look for an image of a screen.) |
I had cups-pdf working in Stretch, printing successfully with searchable text to ~/Documents/cups-pdf. Last month I dist-upgraded to Buster and cups-pdf will now only print to the default directory ~/PDF. I've purged and installed cups and cups-pdf (printer-driver-cups-pdf) but still cannot print to my preferred direct... | A little more progress... After enabling debuging in /etc/cups/cups-pdf.conf, re-printing a new job, then opening /var/log/cups/cups-pdf-Virtual_PDF_Printer_log to view the results. I found the gs line: Code: Select allSat Jan 11 20:15:03 2020 [DEBUG] ghostscript commandline built: /usr/bin/gs -q -dCompatibilityLevel=1... |
system: debian kde testing When I put a usb-stick in my pc I am asked for my password. The usb-stick is formatted as fat32 with gparted (on my system) and labeled usb4 If I look at the map /media/usb4 is see that I am the owner and the permissions are 755. This behaviour started a few days ago. How can I solve this?? | Have you enabled auto-mounting? The /media/usb4 mountpoint suggests that you have added an fstab line instead of relying on udisks2, is that the case? If so then please post the content of /etc/fstab Open a terminal and run this command Code: Select alludevadm monitor Then plug the stick in and post any new output that... |
Hi all, I have a strange issue with Debian10 and Apache2. On this linux machine I have installed Apache2 with MariaDB. Apache2 works fine if I manually start it when Debian10 is running, but not start automatically at boot (I have just configure it using systemctl enable apache2). I get this error when Apache2 try to s... | You could try posting the content of /etc/apache2/conf-enabled/serve-cgi-bin.conf as that appears to be where the problem is. |
This morning, I upgraded my video card to a Radeon RX580, and when I booted up, I was unable to get any video out of either of the HDMI ports. The monitor connected to the DVI port of course works fine. So I rebooted, and selected kernel 4.9.0-11-amd64 at the grub menu, and everything comes up fine. I've tried adding t... | There are numerous changes concerning this card between kernels 4.9 and 4.19. Under 4.19 it should use amdgpu and polaris10 firmware. Under the working 4.9 what is the results of dmesg | grep amdgpu? You may need to specify a change if 4.9 reports using the radeon driver. |
Hi all, so my idea was to configure my keyboard layout to better suit my needs. To that end, I edited the file /usr/share/X11/xkb/symbols/us. For the sake of example, I edit the first entry - the tilde key - from the original: Code: Select allkey <TLDE> { [ grave, asciitilde]}; to the new Code: Select allkey <TLDE> { [... | Code: Select alllocalectl |
A recent bullseye update failed to rebuild my legacy nvidia driver (340xx). I think the gpu is a GT210. The automated build failed because it couldn't find the required linux header files. uname -a gives me: 5.3.0-3-amd64 #1 SMP Debian 5.3.15-1 ((2019-12-07) x86-64 Code: Select alldpkg-reconfigure nvidia-legacy-340xx-k... | ticketman wrote:what on earth is going on?? You are running testing. Isn't it fun. |
SOLVED: uh..... Turns out it was a case sensitivity thing. Everything is working. Thanks to everyone that took a look I have a FusionPBX server running Debian. I have configured /etc/xinetd.d/tfpt as follows: service tftp { protocol = udp port = 69 socket_type = dgram wait = yes user = nobody server = /usr/sbin/in.tftp... | TFTP is a bit like FTP, it uses other ports than 69 for file transfer. Netfilter connection tracking has a specific helper to identify data packets in the RELATED state. |
Hi, I backed up /etc folder, but when I rsync /etc/ufw and /etc/gufw to restore firewall rulles and restart services I dont see the rules coming up in gufw gui. Any help, please.., Thanks. | ok, I got it by importing gufw profiles within gui gufw Thanks. |
Hello, I've successfully installed Debian 10 on my Mac-book 4.1 and wifi was working flawlessly until I tried to use it with a Huawei B535 router... With the previous router (TP-Link Archer D50) the WiFi 2.4 GHz has always worked fine. With this router my laptop sees the WiFi wlan at 2.4 GHz, seems to connect without p... | One thing to look at is the encryptation ciphers. ccmp(aes) is more secure than tkip but some older wifi cards only support tkip. If your new router defaults to ccmp and your older MacBook is set for tkip it would result in what you are reporting. You can go through the routers configuration to see how the cipher is se... |
Hi all, just installed buster. if it changes anything, I kept my /home partition from the previous stretch installation, while I overwrote the system partitions with the installer (weird issues with packages dependencies). anything seems fine and most applications picked up their previous configuration. then, as I have... | Xorg.0.log may be in some directory in /var/log, depends of DE. Just try find it: Code: Select allfind /var/log -name Xorg.0.log Peter. |
Can't connect to the internet using a 3G+ USB hotspot on Debian/Ubuntu Hello. I have a problem with the device I use to connect to the internet, it's a USB hotspot, it dials and connects to 3G+ all on its own and shares the internet via USB using the ethernet protocol, so on windows it's seen as an ethernet device and ... | frbell wrote:Here's the info I get from the ubuntu forums script: https://pastebin.ubuntu.com/p/KhTNWhWcfk/ That shows the device is available as the wwx interface. So try Code: Select all# ip link set eno1 down # ip link set wwx up # dhclient wwx Or is that not how you want to use it? |
Hello, I have an issue with a sata disk. On this sata disk I have some shared folder with samba in my LAN. I have created a simple script in the past, and it worked fine, but disk mounting doesn't work. This is my simple script: Code: Select all#!/bin/bash mount /dev/sda1 /media/disk1 > log.txt I tried to execute this ... | In the script it would be better IMHO to not use /dev/sda1. Give the disk a label and use /dev/disk/by-label/samba_disk or something...or use its uuid, anything but sda1. What is the result when you manually mount the disk? It may need a fsck. |
I have asked this question earlier, but there was no answer. I am trying again. I am having problems with suspend to ram function in debian 10.2 (previously in debian 9.x). When I select the "suspend to ram" from start menu, system goes to suspended mode, but wake up is the problem. The system freezes and screen is bla... | What is reporting this: Code: Select allapt list acpi upower uswsusp pm-utils Code: Select allsystemctl cat systemd-suspend.service | grep -v '#' systemctl cat suspend.target | grep -v '#' Code: Select alljournalctl -ax | grep suspend | tail -15 Code: Select allfree -mh |
I have Debian on my primary laptop partition and Hyperbola (an Arch-based distro with Debian security patches) on the other. A week ago, I chrooted into Hyperbola from Debian and updated Hyperbola. Then I upgraded Debian 9 to 10. Ever since then, I have not been able to access Hyperbola. When I choose Hyperbola from th... | Also post at least the contents of the Hyperbola menu entry in /boot/grub/grub.cfg. Did you try replacing "root=UUID=xxx" in the menu entry with "root=/dev/sda2" (or whatever the Hyperbola partition is) in GRUB ("e") before booting Hyperbola ? This is not recommended for normal use (unreliable) but may help in this sit... |
Debian stable 9.8 Swithed hd to ssd, and after reinstalling, wifi does not work automatically anymore. There was annoying 5 minute wait of some systemd network-target, which I changed to 1 second. My /etc/network/interfaces: Code: Select all# This file describes the network interfaces available on your system # and how... | arzgi wrote:There was annoying 5 minute wait of some systemd network-target Check the output of Code: Select alljournalctl -u $unit.file and replace $unit.file with the name of the actual unit file(s) listed by the error message. Also check Code: Select allsystemctl --failed to see which units have failed, then use the... |
I understand from various sources on the net that user scripts are best placed in a ~/bin directory. I have made such a directory. Various sources also state that on creation (after logout and logon) the new directory should be added to the PATH variable. Indeed the .profile file seems to confirm this, if I understand ... | Head_on_a_Stick wrote:~/.profile isn't read for graphical logins. See https://wiki.debian.org/EnvironmentVariables tl;dr: add the PATH stuff to ~/.xsessionrc instead (or use a console login rather than a display manager). Weird, it works for me in a fairly vanilla Buster/KDE which uses SDDM. I know it says it doesn't o... |
I wrote a script to change IP address associated with the Ethernet port; this laptop is used on many different pieces of equipment and the IP address has to be changed frequently. A regular user account can change the IP Address by going into settings, but that is a lot of clicks and difficult for some users, the scrip... | I guess your (unspecified) graphical settings program uses polkit or such to allow local users physically using the desktop to perform such actions. On the commandline you don't get that luxury. However sudo has been around for a number of years providing a solution to exactly that problem. Just create a group of users... |
Debian 10.2 xfce cups installed and did work well for long, no idea when stopped working Since sending something to printer wasn't possible, I removed the network printer, tried to add it again with no success from System --> Print Settings --> add IP select IPP--> cups server error if I try through the web page --> ht... | cups complete removal and new install |
I am using Debian Buster Gnome 3.30 Wayland on an HP Laptop HDX-18 with built-in Nvidia GT 130M graphics card and nouveau driver. A newer Kernel like 5.3.x form Debian backports brings sometimes better performance, energy savings, nouveau improvements etc. . There are any objective criteria when to use a newer kernel a... | It sounds like you probably have an Optimus laptop, which means you have to install the Nvidia driver and Bumblebee in a special manner as detailed in the Debian wiki. You will also need a newer version of the Nvidia driver---I do know that the 440.36 driver works with a 5.4 kernel, both of those are not in backports y... |
Hi, Ive some few Doubts about this,: 1- How do I know If an App is using vdpau or vaapi acceleration?...Ive read that most applications only support vdpau driver..so its needed to use vdpau (backend) to enjoy hardware gpu. 2- If using vdpau (backend vaapi), I guess its almost the same as vaapi acceleration (I meant the... | If you have Intel then you want VAAPI but some applications don't support it directly so you need the VAAPI backend for VDPAU: https://packages.debian.org/buster/libvdpau-va-gl1 Check Code: Select allvainfo vdpauinfo Kodi supports both VAAPI and VDPAU[1] so it should default to VAAPI for your hardware. |
When the system is booting there are messages from the booting process. In the beginning messages are printed using one font, but when the kernel is setting up the console the font is changed. I want a method to keep the first font, because in my opinion it is better. But I don't know which font is that, and I don't kn... | pythagorasmk wrote:I don't know which font is that It's called the "VGA" font and is the native font supplied by your video card. pythagorasmk wrote:I don't know where I can setup the font for virtual consoles Code: Select all# apt install console-setup # dpkg-reconfigure console-setup |
Hello everybody, I've been having a bear of a time trying to get my Debian Buster-based router to operate with Comcast's native IPv6 configuration. I'm not looking for prefix delegation, just a public address and a default gateway. I'm using the ISC DHCP client for both v4 and v6 since it's generally worked for me othe... | I ended up cheating by having this setup enable both wide-dhcpv6 for the IP address, and SLAAC for the routing information. It's really odd how the configuration built into the system doesn't allow it. /etc/network/interfaces Code: Select allauto eth-external iface eth-external inet dhcp pre-up modprobe ipv6 post-up /e... |
I have Zoneminder writing to /home/zoneminder and /home is a ZFS mount. If /home/zoneminder doesn't exist, Zoneminder creates it. If anything exists in /home, zfs-mount refuses to mount it. So I want Zoneminder to start after zfs-mount. I have tried: After=network.target mysql.service zfs.target and After=network.targe... | Try Wants= and use the journal to investigate. |
Yesterday I took my Buster install up to Testing/Bullseye and I'm now getting the following when trying to install a package: Code: Select alldpkg: warning: 'ldconfig' not found in PATH or not executable dpkg: warning: 'start-stop-daemon' not found in PATH or not executable dpkg: error: 2 expected programs not found in... | That's your user PATH. If you're trying to nail down an issue with dpkg, you need to check root PATH. Code: Select all$ su - <enter root password> # echo $PATH |
Hi all, I have an HP laptop. My model is HP Elitebook 840 G3. Debian 10 on this laptop works really well, but I have at the moment a problem. The issues is this one: when I move laptop, in some situation just screen inclination, screen orentation change! How can I fix this issues? Thanks Federico | I have found a solution: on the top right cornet there is a small triangle, if you are using Gnome on Debian. Click on this little icon and it will appear a menu. On this menu there is the shutdown option and near this button, there is another one that permit to lock the screen. Regards |
Hardware Huawei Matebook13, touchpad appears to be working fine, perhaps a little sensitive, but that might be the weight of my finger The problem is that just touching the pad can run the cpu up to 15%, and /var/log/syslog writes zillions of these lines, repeated at a whisker under 7milliseconds: Code: Select allOct 2... | Kind of a hack but this is first thing that popped into head for your situation. That being to set it so that all that garbage is simply excluded from logging to your syslog. As long as it's working fine, who needs to hear all that noise. Haven't been in that particular situation so can't advise how to proceed in any d... |
So I had a fun weekend building this... but since my knowledge of the Debian way of doing things is limited, I wanted someone with an experienced eye to review. Users connect to the wireless AP (AE) operating in bridge mode or they connect direct via ethernet to switch. Aquire a IP address and routing from dnsmasq to f... | They say the lord helps those who help themselves... a firewall ruleset after a night of learnings. Code: Select alltable inet filter { chain input { type filter hook input priority 0; policy drop; iif "lo" accept iif "eth0" jump lan iif "wlan0" jump wan } chain forward { type filter hook forward priority 0; policy dro... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.