hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.3.5 Incoming call / U9 mobile terminating call confirmed / RELEASE received | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.3.5.1 Definition | The call control entity of the UE being in the state, U9, a RELEASE message is received by the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.3.5.2 Conformance requirement | The call control entity of the UE in any state except the "null" state and the "release request" state, shall, upon receipt of a RELEASE message: stop all running call control timers; send a RELEASE COMPLETE message; release the MM connection; and return to the "null" state.
References
TS 24.008 clause 5.4.3.3 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.3.5.3 Test purpose | 1) To verify that a CC-entity of the UE in CC-state U9, "Mobile Terminating Call Confirmed", upon receipt of a RELEASE will return a RELEASE COMPLETE and enter the CC-state U0, "Null".
2) To verify that the UE on returning to the idle mode releases the MM-connection and that the CC-entities relating to the seven mobile... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.3.5.4 Method of test | Related ICS/IXIT statements
- supported MT circuit switched basic services;
- MT circuit switched basic services for which immediate connect is not used.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought int... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.3.5.5 Test requirements | After step 1 the UE shall return a RELEASE COMPLETE message.
After step 3 CC entities relating to all mobile originating transaction identifiers shall send RELEASE COMPLETE messages with cause value #81 (invalid TI value). |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.3.6 Incoming call / U9 mobile terminating call confirmed / lower layer failure | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.3.6.1 Definition | The call control entity of the UE being in the state, U9, a lower layer failure is accomplished at the UE and consequently, communication at layer 3 level with the peer entity is terminated. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.3.6.2 Conformance requirement | The MM sublayer shall indicate to all CM entities associated with active MM connections that the MM connection is interrupted, the subsequent action of the MM sublayer (call re-establishment, see TS 24.008 clause 4.5.1.6, or local release) will then depend on the decisions by the CM entities.
References
TS 24.008 claus... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.3.6.3 Test purpose | To verify that a CC entity of the UE in CC-state U9, "Mobile Terminating Call Confirmed", having detected a lower layer failure returns to idle mode, the CC entity is in state U0, "Null". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.3.6.4 Method of test | Related ICS/IXIT statements
- supported MT circuit switched basic services;
- MT circuit switched basic services for which immediate connect is not used.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought int... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.3.6.5 Test requirements | After step 4 the UE shall not send any message to the SS during 60 s. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.3.7 Incoming call / U9 mobile terminating call confirmed / unknown message received | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.3.7.1 Definition | The call control entity of the UE being in the state, U9, an unknown message is received by the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.3.7.2 Conformance requirement | If a UE receives an RR, MM or CC message with message type not defined for the PD or not implemented by the receiver in acknowledged mode, it shall return a status message (STATUS, MM STATUS depending on the protocol discriminator) with cause # 97 "message type non-existent or not implemented".
References
TS 24.008 cla... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.3.7.3 Test purpose | To verify that a CC-entity of the UE in CC-state U9, "Mobile Terminating Call Confirmed" having received an unknown message from its peer entity returns a STATUS message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.3.7.4 Method of test | Related ICS/IXIT statements
- supported MT circuit switched basic services;
- MT circuit switched basic services for which immediate connect is not used.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought int... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.3.7.5 Test requirements | After step 1 the UE shall return a STATUS message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4 Incoming call / U7 call received | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.1 Incoming call / U7 call received / call accepted | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.1.1 Definition | The call control entity of the UE being in the state, U7, a user accepts the incoming call. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.1.2 Conformance requirement | In the "mobile terminating call confirmed" state or the "call received" state, the call control entity in the UE indicates acceptance of a mobile terminating call by:
- sending a CONNECT message to its peer entity in the network;
- starting Timer T313; and
- entering the "connect request" state.
References
TS 24.008 cl... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.1.3 Test purpose | To verify that a CC entity of a UE in CC-state U7, "Call Received", upon a user accepting the incoming call, shall send a CONNECT message to its peer entity and enter the CC-state U8, "Connect Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.1.4 Method of test | Related ICS/IXIT statements
- supported MT circuit switched basic services;
- MT circuit switched basic services for which immediate connect is not used.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought int... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.1.5 Test requirements | After step 1 a UE shall send a CONNECT message and enter the CC-state U8, "Connect Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.2 Incoming call / U7 call received / termination requested by the user | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.2.1 Definition | The call control entity of the UE being in the state, U7, a user requests to terminate incoming call. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.2.2 Conformance requirement | Apart from the exceptions identified in TS 24.008 clause 5.4.2, the call control entity of the UE shall initiate clearing by: stopping all running call control timers, sending a DISCONNECT message; starting timer T305; and entering the "disconnect request" state.
References
TS 24.008 clause 5.4.3.1 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.2.3 Test purpose | To verify that a CC entity of a UE in CC-state U7, "Call Received", upon request by the user to terminate will send a DISCONNECT message and enter the CC-state U11, "Disconnect Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.2.4 Method of test | Related ICS/IXIT statements
- supported MT circuit switched basic services;
- MT circuit switched basic services for which immediate connect is not used.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought int... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.2.5 Test requirements | After step 1 a UE shall send a DISCONNECT message and enter the CC-state U11, "Disconnect Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.3 Incoming call / U7 call received / DISCONNECT received | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.3.1 Definition | The call control entity of the UE being in the state, U7, a DISCONNECT message is received by the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.3.2 Conformance requirement | The call control entity of the UE in any state except the "null" state, the "disconnect indication" state, and the "release request" state, shall, upon receipt of a DISCONNECT message with progress indicator #8:
i) if an appropriate speech traffic channel is not connected, continue clearing as defined in TS 24.008 clau... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.3.3 Test purpose | To verify that a CC entity of a UE in CC-state U7, "Call Received", upon receipt of a DISCONNECT with a progress indicator indicating in-band information from network, if a DTCH was not assigned, returns a RELEASE message and enters the CC-state U19, "Release Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.3.4 Method of test | Related ICS/IXIT statements
- supported MT circuit switched basic services;
- MT circuit switched basic services for which immediate connect is not used.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought int... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.3.5 Test requirements | After step 1 a UE if a DTCH was not assigned, shall return a RELEASE message and enter the CC-state U19, "Release Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.4 Incoming call / U7 call received / RELEASE received | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.4.1 Definition | The call control entity of the UE being in the state, U7, a RELEASE message is received by the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.4.2 Conformance requirement | The call control entity of the UE in any state except the "null" state and the "release request" state, shall, upon receipt of a RELEASE message: stop all running call control timers; send a RELEASE COMPLETE message; release the MM connection; and return to the "null" state.
References
TS 24.008 clause 5.4.3.3 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.4.3 Test purpose | 1) To verify that a CC entity of a UE in CC-state U7, "Call Received", upon receipt of a RELEASE will return a RELEASE COMPLETE and enter the CC-state U0, "Null".
2) To verify that the UE on returning to the idle mode releases the MM-connection and that the CC-entities relating to the seven mobile terminating transacti... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.4.4 Method of test | Related ICS/IXIT statements
- supported MT circuit switched basic services;
- MT circuit switched basic services for which immediate connect is not used.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought int... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.4.5 Test requirements | After step 1 a UE shall return a RELEASE COMPLETE message.
After step 3 CC entities relating to all mobile originating transaction identifiers shall send RELEASE COMPLETE messages with cause value #81 (invalid TI value). |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.5 Incoming call / U7 call received / lower layer failure | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.5.1 Definition | The call control entity of the UE being in the state, U7, a lower layer failure is accomplished at the UE and consequently, communication at layer 3 level with the peer entity is terminated. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.5.2 Conformance requirement | The MM sublayer shall indicate to all CM entities associated with active MM connections that the MM connection is interrupted, the subsequent action of the MM sublayer (call re-establishment, see TS 24.008 clause 4.5.1.6, or local release) will then depend on the decisions by the CM entities.
References
TS 24.008 claus... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.5.3 Test purpose | To verify that a CC entity of a UE in CC-state U7, "Call Received", having detected a lower layer failure returns to idle mode, the CC entity is in state U0, "Null". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.5.4 Method of test | Related ICS/IXIT statements
- supported MT circuit switched basic services;
- MT circuit switched basic services for which immediate connect is not used.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought int... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.5.5 Test requirements | After step 4 the UE shall not send any message to the SS during 60 s. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.6 Incoming call / U7 call received / unknown message received | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.6.1 Definition | The call control entity of the UE being in the state, U7, an unknown message is received by the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.6.2 Conformance requirement | If a UE receives an RR, MM or CC message with message type not defined for the PD or not implemented by the receiver in acknowledged mode, it shall return a status message (STATUS, MM STATUS depending on the protocol discriminator) with cause # 97 "message type non-existent or not implemented".
References
TS 24.008 cla... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.6.3 Test purpose | To verify that a CC entity of a UE in CC-state U7, "Call Received", having received an unknown message from its peer entity returns a STATUS message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.6.4 Method of test | Related ICS/IXIT statements
- supported MT circuit switched basic services;
- MT circuit switched basic services for which immediate connect is not used.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought int... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.6.5 Test requirements | After step 1 a UE shall return a STATUS message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.7 Incoming call / U7 call received / DTCH assignment | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.7.1 Definition | The call control entity of the UE being in the state, U7, a radio bearer establishment procedure is performed for traffic channel. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.7.2 Conformance requirement | It is a network dependent decision when to initiate the assignment of a traffic channel during the mobile terminating call establishment phase.
Initiation of the assignment phase does not directly change the state of a CC entity nor affect any call control timer, but may have some secondary effects (see e.g. TS 24.008 ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.7.3 Test purpose | To verify that a CC entity of a UE in CC-state U7, "Call Received", when a traffic channel is allocated by the network performing the radio bearer establishment procedure, stays in CC-state U7. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.7.4 Method of test | Related ICS/IXIT statements
- supported MT circuit switched basic services;
- MT circuit switched basic services for which immediate connect is not used.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought int... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.7.5 Test requirements | After step 1 the CC state U7, "Call Received", shall remain unchanged. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.8 Incoming call / U7 call received / RELEASE COMPLETE received | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.8.1 Definition | The call control entity of the UE being in the state, U7, the call is cleared by a RELEASE COMPLETE message sent by the SS. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.8.2 Conformance requirement | 1) A call control entity shall accept an incoming RELEASE COMPLETE message used to initiate the call clearing even though the cause information element is not included.
2) A call control entity of the UE in any call control state shall, upon receipt of a RELEASE COMPLETE message from its peer entity in the network: sto... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.8.3 Test purpose | 1) To verify that a CC entity of the UE in CC-state U7, "Call received", upon receipt of a RELEASE COMPLETE message with valid cause value, enters CC state U0, "Null".
2) To verify that in returning to idle mode, the CC entities relating to the seven mobile terminating transaction identifiers are in state U0, "Null". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.8.4 Method of test | Related ICS/IXIT statements
- supported MT circuit switched basic services;
- MT circuit switched basic services for which immediate connect is not used.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought int... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.4.8.5 Test requirements | After step 2 CC entities relating to all mobile originating transaction identifiers shall send RELEASE COMPLETE messages with cause value #81 (invalid TI value). |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5 Incoming call / U8 connect request | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.1 Incoming call / U8 connect request / CONNECT acknowledged | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.1.1 Definition | The call control entity of the UE being in the state, U8, a CONNECT ACKNOWLEDGE message is received by the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.1.2 Conformance requirement | In the "connect request" state, the call control entity of the UE shall, upon receipt of a CONNECT ACKNOWLEDGE message: stop timer T313 and enter the "active" state.
References
TS 24.008 clause 5.2.2.6. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.1.3 Test purpose | To verify that a CC entity of a UE in CC-state U8, "Connect Request", upon receipt of CONNECT ACKNOWLEDGE shall enter the CC-state U10, " Active". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.1.4 Method of test | Related ICS/IXIT statements
- supported MT circuit switched basic services;
- MT circuit switched basic services for which immediate connect is not used.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought int... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.1.5 Test requirements | After step 2 a UE shall enter the CC-state U10, "Active". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.2 Incoming call / U8 connect request / timer T313 time-out | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.2.1 Definition | The call control entity of the UE being in the state, U8, if no response is then received from the SS, timer T313 expires at the UE side. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.2.2 Conformance requirement | 1) When timer T313 expires prior to the receipt of a CONNECT ACKNOWLEDGE message, the UE shall initiate clearing in accordance with clause 5.4.3.
2) Apart from the exceptions identified in TS 24.008 clause 5.4.2, the call control entity of the UE shall initiate clearing by: stopping all running call control timers, sen... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.2.3 Test purpose | To verify that a CC entity of a UE in CC-state U8, "Connect Request", having waited for a reasonable length of time (e.g. expiry of timer T313) without receiving the appropriate protocol message to complete the incoming call, shall initiate the clearing of that incoming call by sending the CC message DISCONNECT and ent... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.2.4 Method of test | Related ICS/IXIT statements
- supported MT circuit switched basic services;
- MT circuit switched basic services for which immediate connect is not used.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought int... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.2.5 Test requirements | After step A1 a UE shall initiate the clearing of that incoming call by sending a DISCONNECT message and enter the CC-state U11, "Disconnect Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.3 Incoming call / U8 connect request / termination requested by the user | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.3.1 Definition | The call control entity of the UE being in the state, U8, the user requests for releasing of the call. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.3.2 Conformance requirement | Apart from the exceptions identified in TS 24.008 clause 5.4.2, the call control entity of the UE shall initiate clearing by: stopping all running call control timers, sending a DISCONNECT message; starting timer T305; and entering the "disconnect request" state.
References
TS 24.008 clause 5.4.3.1 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.3.3 Test purpose | To verify that a CC entity of a UE in CC-state U8, "Connect Request", upon request by the user to terminate will send a DISCONNECT message and enter the CC-state U11, "Disconnect Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.3.4 Method of test | Related ICS/IXIT statements
- supported MT circuit switched basic services;
- MT circuit switched basic services for which immediate connect is not used.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought int... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.3.5 Test requirements | After step 2 a UE shall send a DISCONNECT message and enter the CC-state U11, "Disconnect Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.4 Incoming call / U8 connect request / DISCONNECT received with in-band information | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.4.1 Definition | The call control entity of the UE being in the state, U8, a DISCONNECT message indicating availability of in band information is received by the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.4.2 Conformance requirement | The call control entity of the UE in any state except the "null" state, the "disconnect indication" state, and the "release request" state, shall, upon receipt of a DISCONNECT message with progress indicator #8:
i) if an appropriate speech traffic channel is not connected, continue clearing as defined in TS 24.008 clau... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.4.3 Test purpose | To verify that a CC entity of a UE in CC-state U8, "Connect Request", upon receipt of a DISCONNECT with progress indicator #8 enters CC-state U12, if the traffic channel is in speech mode, and that the UE sends a RELEASE message and enters CC-state U19 if the DTCH is not in speech mode. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.4.4 Method of test | Related ICS/IXIT statements
- supported MT circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U8 by using table 10.1.3/4.
Test procedure
An MT circuit switched ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.4.5 Test requirements | After step 1 a UE shall enter CC-state U12, if the traffic channel is in speech mode. If the DTCH is not in speech mode, the UE shall send a RELEASE message and enter CC-state U19. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.5 Incoming call / U8 connect request / DISCONNECT received without in-band information | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.5.1 Definition | The call control entity of the UE being in the state, U8, a DISCONNECT message is received by the UE. The DISCONNECT message does not contain indication of in-band information availability. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.5.2 Conformance requirement | The call control entity of the UE in any state except the "null" state, the "disconnect indication" state, and the "release request" state, shall, upon the receipt of a DISCONNECT message without progress indicator information element or with progress indicator different from #8:
- stop all running call control timers;... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.5.3 Test purpose | To verify that a CC entity of a UE in CC-state U8, "Connect Request", upon receipt of a DISCONNECT without progress indicator, returns a RELEASE message and enters the CC-state U19, "Release Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.5.4 Method of test | Related ICS/IXIT statements
- supported MT circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U8 by using table 10.1.3/4.
Test procedure
An MT circuit switched ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.5.5 Test requirements | After step 1 a UE shall return a RELEASE message and enter the CC-state U19, "Release Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.6 Incoming call / U8 connect request / RELEASE received | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.3.5.6.1 Definition | The call control entity of the UE being in the state, U8, a RELEASE message is received by the UE. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.