hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.2.1 Definition | The call control entity of the UE being in the state, U4, the user requests to terminate the call. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.2.2 Conformance requirement | Apart from the exceptions identified in TS 24.008 clause 5.4.2, the call control entity of the UE shall initiate clearing by: stopping all running call control timers, sending a DISCONNECT message; starting timer T305; and entering the "disconnect request" state.
References
TS 24.008 clause 5.4.3.1 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.2.3 Test purpose | To verify that a CC-entity of the UE in CC-state U4, "Call Delivered", upon request by the user to terminate will send a DISCONNECT message and enter the CC-state U11, "Disconnect Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.2.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U4 by using table 10.1.2/3.
Test procedure
An MO circuit switched ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.2.5 Test requirements | After step 1 the UE shall send a DISCONNECT message and enter the CC state U11, "Disconnect Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.3 Outgoing call / U4 call delivered / DISCONNECT with in band tones | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.3.1 Definition | The call control entity of the UE being in the state, U4, a DISCONNECT message indicating availability of in band information is received by the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.3.2 Conformance requirement | The call control entity of the UE in any state except the "null" state, the "disconnect indication" state, and the "release request" state, shall, upon receipt of a DISCONNECT message with progress indicator #8:
i) if an appropriate speech traffic channel is not connected, continue clearing as defined in TS 24.008 clau... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.3.3 Test purpose | To verify that a CC-entity of the UE in CC-state U4, "Call Delivered", upon receipt of a DISCONNECT with a progress indicator indicating in-band information, through-connects the speech channel to make in-band announcements available, if traffic channel is in speech mode. If DTCH is not in speech mode, the UE shall sen... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.3.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U4 by using table10.1.2/3.
Test procedure
An MO circuit switched b... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.3.5 Test requirements | After step 1 the UE shall through-connect the speech channel to make in-band announcements available, if traffic channel is in speech mode. If DTCH is not in speech mode, the UE shall send a RELEASE message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.4 Outgoing call / U4 call delivered / DISCONNECT without in band tones | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.4.1 Definition | The call control entity of the UE being in the state, U4, a DISCONNECT message is received by the UE. The DISCONNECT message does not contain indication of in-band information availability. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.4.2 Conformance requirement | The call control entity of the UE in any state except the "null" state, the "disconnect indication" state, and the "release request" state, shall, upon the receipt of a DISCONNECT message without progress indicator information element or with progress indicator different from #8:
- stop all running call control timers;... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.4.3 Test purpose | To verify that a CC-entity of the UE in CC-state U4, "Call Delivered", upon receipt of a DISCONNECT without progress indicator, returns a RELEASE message and enters the CC-state U19, "Release Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.4.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U4 by using table 10.1.2/3.
Test procedure
An MO circuit switched ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.4.5 Test requirements | After step 1 the UE shall return a RELEASE message and enter the CC-state U19, "Release Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.5 Outgoing call / U4 call delivered / RELEASE received | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.5.1 Definition | The call control entity of the UE being in the state, U4, a RELEASE message is received by the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.5.2 Conformance requirement | The call control entity of the UE in any state except the "null" state and the "release request" state, shall, upon receipt of a RELEASE message: stop all running call control timers; send a RELEASE COMPLETE message; release the MM connection; and return to the "null" state.
References
TS 24.008 clause 5.4.3.3. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.5.3 Test purpose | 1) To verify that a CC-entity of the UE in CC-state U4, "Call Delivered", upon receipt of the RELEASE message will respond with the RELEASE COMPLETE message and enter the CC-state U0, "Null". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.5.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U4 by using table10.1.2/3.
Test procedure
An MO circuit switched b... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.5.5 Test requirements | After step 1 the UE shall respond with the RELEASE COMPLETE message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.6 Outgoing call / U4 call delivered / lower layer failure | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.6.1 Definition | The call control entity of the UE being in the state, U4, a lower layer failure is accomplished at the UE and consequently, communication at layer 3 level with the peer entity is terminated. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.6.2 Conformance requirement | The MM sublayer shall indicate to all CM entities associated with active MM connections that the MM connection is interrupted, the subsequent action of the MM sublayer (call re-establishment, see TS 24.008 clause 4.5.1.6, or local release) will then depend on the decisions by the CM entities.
References
TS 24.008 claus... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.6.3 Test purpose | To verify that a CC-entity of the UE in CC-state U4, "Call Delivered" having detected a lower layer failure and has returned to idle mode, the CC-entity is in CC-state U0, "Null". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.6.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U4 by using table 10.1.2/3.
Test procedure
An MO circuit switched ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.6.5 Test requirements | After step 4 the UE shall not send any message to the SS during 60 s. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.7 Outgoing call / U4 call delivered / traffic channel allocation | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.7.1 Definition | The call control entity of the UE being in the state, U4, a radio bearer establishment procedure is performed. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.7.2 Conformance requirement | It is a network dependent decision when to initiate the assignment of an appropriate traffic channel during the mobile originating call establishment phase. Initiation of a suitable RR procedure to assign an appropriate traffic channel does neither change the state of a call control entity nor affect any call control t... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.7.3 Test purpose | To verify that a CC-entity of the UE in CC-state U4, "Call Delivered", when a traffic channel is allocated by the network performing the radio bearer establishment procedure, stays in CC-state U4. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.7.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U4 by using table 10.1.2/1.
Test procedure
An MO circuit switched ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.7.5 Test requirements | After step 1 the CC state U4, "Call delivered", shall remain unchanged. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.8 Outgoing call / U4 call delivered / unknown message received | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.8.1 Definition | The call control entity of the UE being in the state, U4, an unknown message is received by the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.8.2 Conformance requirement | If a UE receives an RR, MM or CC message with message type not defined for the PD or not implemented by the receiver in acknowledged mode, it shall return a status message (STATUS, MM STATUS depending on the protocol discriminator) with cause # 97 "message type non-existent or not implemented".
References
TS 24.008 cla... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.8.3 Test purpose | To verify that a CC-entity of the UE in CC-state U4, "Call Delivered", having received an unknown message from its peer entity returns a STATUS message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.8.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U4 by using table 10.1.2/4.
Test procedure
An MO circuit switched ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.5.8.5 Test requirements | After step 1 the UE shall return a STATUS message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6 U10 active | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.1 U10 active / termination requested by the user | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.1.1 Definition | The call control entity of the UE being in the state, U10, the user requests to terminate the call. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.1.2 Conformance requirement | Apart from the exceptions identified in TS 24.008 clause 5.4.2, the call control entity of the UE shall initiate clearing by: stopping all running call control timers, sending a DISCONNECT message; starting timer T305; and entering the "disconnect request" state.
References
TS 24.008 clause 5.4.3.1 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.1.3 Test purpose | To verify that the a CC-entity of the UE in CC-state U10, "Active", upon request by the user to terminate will send a DISCONNECT message and enter the CC-state U11, "Disconnect Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.1.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U10 by using table 10.1.2/1.
Test procedure
An MO circuit switched... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.1.5 Test requirements | After step 1 the UE shall send a DISCONNECT message and enter the CC state U11, "Disconnect Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.2 U10 active / RELEASE received | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.2.1 Definition | The call control entity of the UE being in the state, U10, a RELEASE message is received by the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.2.2 Conformance requirement | The call control entity of the UE in any state except the "null" state and the "release request" state, shall, upon receipt of a RELEASE message: stop all running call control timers; send a RELEASE COMPLETE message; release the MM connection; and return to the "null" state.
References
TS 24.008 clause 5.4.3.3. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.2.3 Test purpose | 1) To verify that the a CC-entity of the UE in CC-state U10, "Active", upon receive of the RELEASE will respond with the RELEASE COMPLETE message and enter the CC-state U0, "Null" |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.2.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U10 by using table 10.1.2/1.
Test procedure
An MO circuit switched... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.2.5 Test requirements | After step 1 the UE shall return a RELEASE COMPLETE message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.3 U10 active / DISCONNECT with in band tones | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.3.1 Definition | The call control entity of the UE being in the state, U10, a DISCONNECT message indicating availability of in band information is received by the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.3.2 Conformance requirement | The call control entity of the UE in any state except the "null" state, the "disconnect indication" state, and the "release request" state, shall, upon receipt of a DISCONNECT message with progress indicator #8:
i) if an appropriate speech traffic channel is not connected, continue clearing as defined in TS 24.008 clau... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.3.3 Test purpose | To verify that a CC-entity of the UE in CC-state U10, "Active", upon receipt of a DISCONNECT message with a Progress Indicator indicating in-band information, through-connects the speech channel to make in-band announcements available, if traffic channel is in speech mode. If DTCH is not in speech mode, the UE sends a ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.3.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U10 by using table 10.1.2/1.
Test procedure
An MO circuit switched... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.3.5 Test requirements | After step 1 the UE shall through-connect the speech channel to make in-band announcements available, if traffic channel is in speech mode. If DTCH is not in speech mode, the UE shall send a RELEASE message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.4 U10 active / DISCONNECT without in band tones | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.4.1 Definition | The call control entity of the UE being in the state, U10, a DISCONNECT message is received by the UE. The DISCONNECT message does not contain indication of in-band information availability. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.4.2 Conformance requirement | The call control entity of the UE in any state except the "null" state, the "disconnect indication" state, and the "release request" state, shall, upon the receipt of a DISCONNECT message without progress indicator information element or with progress indicator different from #8:
- stop all running call control timers;... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.4.3 Test purpose | To verify that the a CC-entity of the UE in CC-state U10, "Active", upon receipt of a DISCONNECT message without progress indicator, returns a RELEASE message and enters the CC-state U19, "Release Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.4.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U10 by using table 10.1.2/1.
Test procedure
An MO circuit switched... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.4.5 Test requirements | After step 1 the UE shall return a RELEASE message and enter the CC-state U19, "Release Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.5 U10 active / RELEASE COMPLETE received | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.5.1 Definition | The call control entity of the UE being in the state, U10, the call is cleared by a RELEASE COMPLETE message sent by the SS. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.5.2 Conformance requirement | 1) A call control entity shall accept an incoming RELEASE COMPLETE message used to initiate the call clearing even though the cause information element is not included.
2) A call control entity of the UE in any call control state shall, upon receipt of a RELEASE COMPLETE message from its peer entity in the network: sto... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.5.3 Test purpose | 1) To verify that a CC entity of the UE in CC-state U10, "Active" upon receipt of a RELEASE COMPLETE message with valid cause value, enters CC state U0, "Null".
2) To verify that in returning to idle mode, the CC entities relating to the seven mobile originating transaction identifiers are in state U0, "Null". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.5.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U10 by using table 10.1.2/1.
Test procedure
The SS sends a RELEASE... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.5.5 Test requirements | After step 2 CC entities relating to all mobile originating transaction identifiers shall send RELEASE COMPLETE messages with cause value #81 (invalid TI value). |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.6 U10 active / SETUP received | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.6.1 Definition | If the UE does not react correctly when receiving a SETUP message on a new Transaction Identifier during an active call, the active call may be lost. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.6.2 Conformance requirement | 1) A busy UE which satisfies the compatibility requirements indicated in the SETUP message shall respond either with a CALL CONFIRMED message if the call setup is allowed to continue or a RELEASE COMPLETE message if the call setup is not allowed to continue, both with cause #17 "user busy".
References:
TS 24.008 clause... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.6.3 Test purpose | 1) To verify that a User Equipment that has a call established and receives a SETUP message answers either with a CALL CONFIRMED message with cause "user busy" if it supports call waiting, or with a RELEASE COMPLETE message with cause "user busy" otherwise.
2) To verify that after having sent this message, the UE is st... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.6.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
- support of call waiting Y/N.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is idle updated with valid TMSI and CKSN.
The UE is brought into the state U10 by using table 10.1.2/1.
Test Procedure
The UE... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.6.6.5 Test requirements | After step 1 a UE that has a call established shall answer either with a CALL CONFIRMED message with cause "user busy" if it supports call waiting, or with a RELEASE COMPLETE message with cause "user busy" otherwise.
After step A2 or B4 the UE shall be in state U10 for the established call. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.7 U11 disconnect request | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.7.1 U11 disconnect request / clear collision | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.7.1.1 Definition | The call control entity of the UE being in the state, U11, a DISCONNECT message is received by the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.7.1.2 Conformance requirement | The call control entity of the UE in any state except the "null" state, the "disconnect indication" state, and the "release request" state, shall, upon the receipt of a DISCONNECT message without progress indicator information element or with progress indicator different from #8:
- stop all running call control timers;... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.7.1.3 Test purpose | To verify that the a CC-entity of the UE in CC-state U11, "Disconnect Request", upon receipt of a DISCONNECT message, returns to its peer entity the RELEASE message and enters the CC-state U19, "Release Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.7.1.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U11 by using table 10.1.2/3.
Test procedure
An MO circuit switched... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.7.1.5 Test requirements | After step 1 the UE shall return the RELEASE message.
After step 3 the UE shall return a STATUS message with "Call state" set to state U19, "Release Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.7.2 U11 disconnect request / RELEASE received | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.7.2.1 Definition | The call control entity of the UE being in the state, U11, a RELEASE message is received by the UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.7.2.2 Conformance requirement | The call control entity of the UE in any state except the "null" state and the "release request" state, shall, upon receipt of a RELEASE message: stop all running call control timers; send a RELEASE COMPLETE message; release the MM connection; and return to the "null" state.
References
TS 24.008 clause 5.4.3.3 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.7.2.3 Test purpose | 1) To verify that the a CC-entity of the UE in CC-state U11, "Disconnect Request", upon receipt of the RELEASE message shall return RELEASE COMPLETE and enter the CC-state U0, "Null". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.7.2.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U11 by using table 10.1.2/3.
Test procedure
An MO circuit switched... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.7.2.5 Test requirements | After step 1 the UE shall return the RELEASE COMPLETE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.7.3 U11 disconnect request / timer T305 time-out | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.7.3.1 Definition | The call control entity of the UE being in the state, U11, if no response is then received from the SS, timer T305 expires at the UE side. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.7.3.2 Conformance requirement | The call control entity of the UE in the "disconnect request" state, shall upon expiry of timer T305: send a RELEASE message to the network with the cause number originally contained in the DISCONNECT message and optionally, a second cause information element with cause #102 "recovery on timer expiry", start timer T308... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.7.3.3 Test purpose | To verify that the CC-entity of the UE in CC-state U11, "Disconnect Request" shall on expiry of T305, proceed with the connection release procedure by sending the RELEASE message to its peer entity and enters the CC-state U19, "Release Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.7.3.4 Method of test | Related ICS/IXIT statements
- supported MO circuit switched basic services.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state "idle, updated" with valid TMSI and CKSN.
The UE is brought into the state U11 by using table 10.1.2/3.
Test procedure
An MO circuit switched... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.7.3.5 Test requirements | After step 1 upon expiry of timer T305 the UE shall proceed with the connection release procedure by sending the RELEASE message and enter the CC-state U19, "Release Request". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.7.4 U11 disconnect request / lower layer failure | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.7.4.1 Definition | The call control entity of the UE being in the state, U11, a lower layer failure is accomplished at the UE and consequently, communication at layer 3 level with the peer entity is terminated. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 10.1.2.7.4.2 Conformance requirement | The MM sublayer shall indicate to all CM entities associated with active MM connections that the MM connection is interrupted, the subsequent action of the MM sublayer (call re-establishment, see TS 24.008 clause 4.5.1.6, or local release) will then depend on the decisions by the CM entities.
References
TS 24.008 claus... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.