hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 13.4.8 Handling of Local Emergency Numbers List provided during normal Routing area update procedure | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 13.4.8.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 13.4.8.2 Conformance requirement | 1) If the GPRS normal Routing area update procedure is accepted by the network, a ROUTING AREA ACCEPT message is sent to the MS. With this message the network may send a list of local emergency numbers, by including the Emergency Number List IE. The mobile equipment shall store the list, as provided by the network, exc... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 13.4.8.3 Test purpose | To verify the core requirements in the scope of the present test case:
1) Verify that with UE having Emergency numbers stored in the USIM and a Local Emergency Numbers List which were provided during the initial Attach procedure when the UE performs a normal RAU and the new network provides a new Local Emergency Number... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 13.4.8.4 Method of test | Initial condition
System Simulator:
Three cells with different RAI, one from them with different MCC: cell A in MCC1/RAC1 (RAI-1), cell B in MCC1/RAC2 (RAI-4), cell C in MCC2/RAC2 (RAI-7).
- NMO I
NB: i) Cell C will be mapped to Cell 4 as found in TS 34.108 clause 6.1.4.1.
User Equipment:
The UE has a valid IMSI.
- USI... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 13.4.8.5 Test requirements | At step 7 the UE shall send the IE "Establishment cause" in the RRC CONNECTION REQUEST message set to "emergency call".
At step 12 the UE shall send the IE "Establishment cause" in the RRC CONNECTION REQUEST message set NOT to "emergency call".
At step 22 the UE shall send the IE "Establishment cause" in the RRC CONNEC... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 13.4.9 Attach for emergency bearer services / Rejected / No suitable cells in location area / Emergency call using the CS domain | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 13.4.9.1 Definition | This test case is applicable to Rel-9 or later UEs that support IMS emergency services and establishing the emergency call using the CS domain in case the attach request for emergency bearer services cannot be accepted by the network. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 13.4.9.2 Conformance requirement | If the attach request for emergency bearer services cannot be accepted by the network, an ATTACH REJECT message is transferred to the MS. The ATTACH REJECT message includes GMM cause #5 "IMEI not accepted" or one of the GMM cause values as described in subclause 4.7.3.1.4.
Upon receiving the ATTACH REJECT message inclu... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 13.4.9.3 Test purpose | To verify that the UE will establish the emergency call using the CS domain after its attach request for emergency bearer services was rejected with GMM cause “No Suitable Cells in Location Area". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 13.4.9.4 Method of test | Initial condition
System Simulator:
- 1 cell, default parameters.
User Equipment:
- The UE is in state “MM idle” with valid TMSI and CKSN.
- The UE is not attached for emergency bearer services.
Related ICS/IXIT statements
- UE supports IMS emergency services yes/no
- UE supports establishing the emergency call using ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 13.4.9.5 Test requirements | Within [60] sec of Step 5, the UE shall transmit an RRC CONNECTION REQUEST with Establishment cause: Emergency Call.
At Step 9, the UE shall transmit a CM SERVICE REQUEST with CM service type IE indicating “Emergency call establishment”.
At Step 12, the UE shall transmit an EMERGENCY SETUP message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 13.4.10 Emergency bearer services / CSG cell / LIMITED-SERVICE / Attach / Security mode control procedure without prior authentication / PDN connect / Service request / PDN disconnect / Detach upon UE switched off / Temporary storage of GMM information | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 13.4.10.1 Definition | This test case is applicable to Rel-9 or later UEs that support IMS emergency services. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 13.4.10.2 Conformance requirement | When the GPRS capability in an activated MS has been enabled, the selection of the GMM-DEREGISTERED substate depends on the MM state and the GPRS update status.
The substate chosen after PLMN-SEARCH, in case of power on or after enabling of the GPRS capability is:
- if the cell is not supporting GPRS, the substate shal... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 13.4.10.3 Test purpose | To verify that when the user originates a call to send user data related to Emergency call:
1) the UE performs an Attach for emergency bearer on non-Allowed CSG cell if only suitable cell is non-allowed CSG cell,
2) the UE transmits a SERVICE REQUEST on the non-allowed CSG cell.
3) Upon detach, the UE deletes the GMM p... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 13.4.10.4 Method of test | Initial condition
System Simulator:
- Cell 1, Serving non CSG cell, default parameters
- Cell 2, CSG cell
User Equipment:
- The UE is in state “MM idle” with valid TMSI and CKSN.
- The UE is not attached for emergency bearer services.
- If pc_CSG, then UE has Allowed CSG list empty.
Related ICS/IXIT statements
- UE sup... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 13.4.10.5 Test requirements | At Step 4, the UE shall transmit an ATTACH REQUEST with Request type set to “emergency” on Cell 2.
At Step 8, the UE shall transmit a SERVICE REQUEST on Cell 2.
At Step 9, the UE shall transmit an ACTIVATE PDP CONTEXT REQUEST with Request type set to “emergency” on Cell 2.
At Step 16, the UE shall transmit an ATTACH RE... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.1 General information for interoperability radio bearer tests | The purpose of the interoperability radio bearer test cases are to ensure interoperability of UE's in different regions and networks. For this purpose representative radio bearer configurations that will be used in real network implementations have been defined in TS 34.108 [9], clause 6.10.
The applicability of radio ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.1.1 Generic radio bearer test procedure for single RB configurations | This procedure is used to test single radio bearer configurations and speech only radio bearers. For testing of multiple radio bearer combinations as well as for testing simultaneous transmission and reception of user data and signalling data then the procedure as specified in 14.1.2 should be used.
Initial conditions
... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.1.2 Generic test procedure for testing multi-RB combinations and simultaneous signalling | This procedure is used to test multiple radio bearer combinations. This procedure is also used to verify simultaneous transmission and reception of user data and signalling data.
Initial conditions
UE in idle mode
Test procedure
a) The SS establish the reference radio bearer configuration as specified in TS 34.108, cla... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.1.3 General information interoperability radio bearer tests for HS-DSCH | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.1.3.1 HS-DSCH radio bearer test parameters | In the radio bearer tests on radio bearers mapped on HS-DSCH, the following UE specific parameters should be used.
Table 14.1.3.1.1: FDD HS-DSCH physical layer parameters for FDD HS-DSCH physical layer categories
HS-DSCH category
Maximum number of HS-DSCH codes received
Minimum inter-TTI interval
Maximum number of bits... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.1.3.2 Selecting TFRC test points | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.1.3.2.1 Principle for non-enhanced Layer 2 | The transport format and resource combination (TFRC) is identified by the UE by the type of modulation, number of channalisation codes and the transport format and resource identifier (TFRI) signalled on the HS-SCCH.
For the HSDPA radio bearer test cases the principle for selecting typical test points for TFRC is:
1. ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.1.3.3 TFRC test points for MAC-d PDU size=336 | Table 14.1.3.3.1: TFRC test points for UE category 1 to UE category 6 for MAC-d PDU size=336
Number of MAC-d PDUs
Selected transport block size [bits]
Modulation scheme
Number of codes
TFRI
Comments
1
365
QPSK
1
19
2
699
QPSK
2
8
2
699
16QAM
1
8
3
1036
QPSK
3
7
3
1036
16QAM
1
30
4
1380
QPSK
4
7
4
1380
16QAM
2
7
5
1711... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.1.3.4 TFRC test points for MAC-d PDU size=656 | Table 14.1.3.4.1: TFRC test points for UE category 1 to UE category 6 for MAC-d PDU size=656
Number of MAC-d PDUs
Selected transport block size [bits]
Modulation scheme
Number of codes
TFRI
Comments
1
686
QPSK
2
7
1
686
16QAM
1
7
2
1356
QPSK
4
6
2
1356
16QAM
2
6
3
2010
QPSK
5
15
3
2010
16QAM
3
5
4
2677
QPSK
5
31
4
267... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.1.3.5 Generic test procedure for HS-DSCH radio bearer combinations with non-enhanced Layer 2 | This procedure is used to test HS-DSCH radio bearer combinations with non-enhanced layer 2. The procedure is run once for each sub-test of the actual HS-DSCH radio bearer test case.
Definition of test variables:
Ncodes
Number of HS-DSCH codes (1..15, maximum number dependent on UE category)
M
Type of modulation scheme... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.1.3.6 Generic test procedure for HS-DSCH radio bearer combinations with AMR RB configurations using SRB#5 for TFC control | This procedure is used to test AMR radio bearer using SRB#5 for TFC control in combination with HS-DSCH radio bearers. The procedure is run once for each sub-test of the actual HS-DSCH radio bearer test case.
Definition of test variables:
Ncodes
Number of HS-DSCH codes (1..15, maximum number dependent on UE category)
... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.1.4 General information interoperability radio bearer tests for E-DCH and HS-DSCH combinations | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.1.4.1 Generic test procedure for HS-DSCH and E-DCH radio bearer combinations | This procedure is used to test E-DCH radio bearer combinations. The procedure is run once for each sub-test of the actual E-DCH radio bearer test case.
NOTE: This test procedure is based on the generic test procedure for radio bearer combinations on HS-DSCH and DCH in section 14.1.3.5. As the testing of DTCH mapped to... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.1.4.2 Generic test procedure for HS-DSCH and E-DCH radio bearer combinations with AMR RB configurations using SRB#5 for TFC control | This procedure is used to test AMR radio bearer using SRB#5 for TFC control in combination with HS-DSCH/E-DCH radio bearers. The procedure is run once for each sub-test of the actual E-DCH radio bearer test case.
Definition of test variables:
Ncodes
The number of HS-DSCH codes (1..15, maximum number dependent on UE ca... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.1.4.3 Generic test procedure for HS-DSCH and E-DCH radio bearer combinations for enhanced uplink in CELL_FACH | This procedure is used to test Enhanced UL and DL in CELL_FACH radio bearer combinations. The procedure is run once for each sub-test of the actual E-DCH radio bearer test case.
NOTE: This test procedure is based on the generic test procedure for radio bearer combinations on HS-DSCH and DCH in section 14.1.4.1. As the... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.1.5 Generic test procedure for radio bearers on MTCH | Initial conditions
System Simulator: 1 MBMS cell
The UE is in CELL_FACH state as specified in clause 7.6 of TS 34.108.
The UE has selected the broadcast service or joined the multicast service to be provided by the SS (included in MBMS_ACTIVATED_SERVICES variable).
Test procedure
a) The UE is in the CELL_FACH state. Th... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.1.6 Generic test procedure for MBMS PTP radio bearers for HS-DSCH combinations | This procedure is used to test MBMS PTP radio bearer combinations for HS-DSCH. The procedure is run once for each sub-test of the actual MBMS PTP radio bearer test case. The generic test procedure has two branches: one for the MBMS Selective Service case and one for the MBMS Multicast Service case. The branch to use i... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2 Combinations on DPCH | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.1 Stand-alone UL:1.7 DL:1.7 kbps SRBs for DCCH | Test to verify establishment and signalling of stand-alone signalling reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.1.1.
The test case is performed by running test case 9.4.1 (Location updating / accepted) using the stand-alone signalling reference radio bearer configuration as specifi... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.2 Stand-alone UL:3.4 DL:3.4 kbps SRBs for DCCH | Test to verify establishment and signalling of stand-alone signalling reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.1.2.
The test case is performed by running test case 9.4.1 (Location updating / accepted) using the stand-alone signalling reference radio bearer configuration as specifi... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.3 Stand-alone UL:13.6 DL:13.6 kbps SRBs for DCCH | Implicitly tested.
NOTE The stand-alone UL:13.6 DL:13.6 kbps SRBs for DCCH in TS 34.108, clause 6.10.2.4.1.3 is the default signalling radio bearer used in the generic setup procedure as specified in TS 34.108 clause 7. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.4 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.4.1 Conformance requirement | The UE shall be able to establish the UTRAN requested radio bearers within the UE's signalled radio access capabilities.
The UE shall correctly transfer user data from peer to peer RLC entities according to the requested radio bearer configuration.
Reference(s)
3GPP TS 25.331, clause 8.2.1
3GPP TS 25.2xx series (Physic... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.4.2 Test purpose | To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.1.4. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.4.3 Method of test | See 14.1.1 for test procedure. However, in this test the RM attribute values used shall be derived separately in the UL and DL as the mid-values of the RM attribute value ranges as specified by the reference radio bearer configuration
Uplink TFS:
TFI
RB5
(RAB subflow #1)
RB6
(RAB subflow #2)
RB7
(RAB subflow #3)
DCCH
T... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.4.4 Test requirements | See 14.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
- for sub-test 1: RB5/TF1 (1x39).
- for sub-test 2: RB5/TF2 (1x81); RB6/TF1 (1x103); and RB7/TF1 (1x60).
3. At step 15 the UE shall return
- for sub-... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.5 Conversational / speech / UL:10.2 DL:10.2 kbps / CS RAB + UL:3.4 DL: 3.4 kbps SRBs for DCCH | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.5.1 Conformance requirement | See clause 14.2.4.1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.5.2 Test purpose | To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.1.5. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.5.3 Method of test | Uplink TFS:
TFI
RB5
(RAB subflow #1)
RB6
(RAB subflow #2)
RB7
(RAB subflow #3)
DCCH
TFS
TF0, bits
0x65
0x99
0x40
0x148
TF1, bits
1x39
1x99
1x40
1x148
TF2, bits
1x65
N/A
N/A
N/A
Uplink TFCS:
TFCI
(RB5, RB6, RB7,DCCH)
UL_TFC0
(TF0, TF0, TF0, TF0)
UL_TFC1
(TF1, TF0, TF0, TF0)
UL_TFC2
(TF2, TF1, TF1, TF0)
UL_TFC3
(TF0, TF0... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.6 Conversational / speech / UL:7.95 DL:7.95 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.6.1 Conformance requirement | See clause 14.2.4.1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.6.2 Test purpose | To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.1.6. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.6.3 Method of test | Uplink TFS:
TFI
RB5
(RAB subflow #1)
RB6
(RAB subflow #2)
RB7
(RAB subflow #3)
DCCH
TFS
TF0, bits
0x75
0x84
0X60
0x148
TF1, bits
1x39
1x84
N/A
1x148
TF2, bits
1x75
N/A
N/A
N/A
Uplink TFCS:
TFCI
(RB5, RB6, RB7, DCCH)
UL_TFC0
(TF0, TF0, TF0, TF0)
UL_TFC1
(TF1, TF0, TF0, TF0)
UL_TFC2
(TF2, TF1, TF0, TF0)
UL_TFC3
(TF0, TF0... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.6.4 Test requirements | See 14.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
- for sub-test 1: RB5/TF1 (1x39).
- for sub-test 2: RB5/TF2 (1x75) and RB6/TF1 (1x84).
3. At step 15 the UE shall return
- for sub-test 1: an RLC SDU... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.7 Conversational / speech / UL:7.4 DL:7.4 kbps / CS RAB+ UL:3.4 DL:3.4 kbps SRBs for DCCH | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.7.1 Conformance requirement | See clause 14.2.4.1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.7.2 Test purpose | To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.1.7. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.7.3 Method of test | Uplink TFS:
TFI
RB5
(RAB subflow #1)
RB6
(RAB subflow #2)
RB7
(RAB subflow #3)
DCCH
TFS
TF0, bits
0x61
0x87
0x60
0x148
TF1, bits
1x39
1x87
N/A
1x148
TF2, bits
1x61
N/A
N/A
N/A
Uplink TFCS:
TFCI
(RB5, RB6, RB7, DCCH)
UL_TFC0
(TF0, TF0, TF0, TF0)
UL_TFC1
(TF1, TF0, TF0, TF0)
UL_TFC2
(TF2, TF1, TF0, TF0)
UL_TFC3
(TF0, TF0... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.7.4 Test requirements | See 14.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
- for sub-test 1: RB5/TF1 (1x39).
- for sub-test 2: RB5/TF2 (1x61) and RB6/TF1 (1x87).
3. At step 15 the UE shall return
- for sub-test 1: an RLC SDU... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.8 Conversational / speech / UL:6.7 DL:6.7 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.8.1 Conformance requirement | See clause 14.2.4.1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.8.2 Test purpose | To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.1.8. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.8.3 Method of test | Uplink TFS:
TFI
RB5
(RAB subflow #1)
RB6
(RAB subflow #2)
RB7
(RAB subflow #3)
DCCH
TFS
TF0, bits
0x58
0x76
0x60
0x148
TF1, bits
1x39
1x76
N/A
1x148
TF2, bits
1x58
N/A
N/A
N/A
Uplink TFCS:
TFCI
(RB5, RB6, RB7, DCCH)
UL_TFC0
(TF0, TF0, TF0, TF0)
UL_TFC1
(TF1, TF0, TF0, TF0)
UL_TFC2
(TF2, TF1, TF0, TF0)
UL_TFC3
(TF0, TF0... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.8.4 Test requirements | See clause 14.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
- for sub-test 1: RB5/TF1 (1x39).
- for sub-test 2: RB5/TF2 (1x58) and RB6/TF1 (1x76).
3. At step 15 the UE shall return
- for sub-test 1: an ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.9 Conversational / speech / UL:5.9 DL:5.9 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.9.1 Conformance requirement | See clause 14.2.4.1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.9.2 Test purpose | To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.1.9. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.9.3 Method of test | Uplink TFS:
TFI
RB5
(RAB subflow #1)
RB6
(RAB subflow #2)
RB7
(RAB subflow #3)
DCCH
TFS
TF0, bits
0x55
0x63
0x60
0x148
TF1, bits
1x39
1x63
N/A
1x148
TF2, bits
1x55
N/A
N/A
N/A
Uplink TFCS:
TFCI
(RB5, RB6, RB7, DCCH)
UL_TFC0
(TF0, TF0, TF0, TF0)
UL_TFC1
(TF1, TF0, TF0, TF0)
UL_TFC2
(TF2, TF1, TF0, TF0)
UL_TFC3
(TF0, TF0... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.9.4 Test requirements | See 14.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
- for sub-test 1: RB5/TF1 (1x39).
- for sub-test 2: RB5/TF2 (1x55) and RB6/TF1 (1x63).
3. At step 15 the UE shall return
- for sub-test 1: an RLC SD... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.10 Conversational / speech / UL:5.15 DL:5.15 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.10.1 Conformance requirement | See clause 14.2.4.1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.10.2 Test purpose | To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.1.10. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.10.3 Method of test | Uplink TFS:
TFI
RB5
(RAB subflow #1)
RB6
(RAB subflow #2)
RB7
(RAB subflow #3)
DCCH
TFS
TF0, bits
0x49
0x54
0x60
0x148
TF1, bits
1x39
1x54
N/A
1x148
TF2, bits
1x49
N/A
N/A
N/A
Uplink TFCS:
TFCI
(RB5, RB6, RB7, DCCH)
UL_TFC0
(TF0, TF0, TF0, TF0)
UL_TFC1
(TF1, TF0, TF0, TF0)
UL_TFC2
(TF2, TF1, TF0, TF0)
UL_TFC3
(TF0, TF0... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.10.4 Test requirements | See 14.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
- for sub-test 1: RB5/TF1 (1x39).
- for sub-test 2: RB5/TF2 (1x49) and RB6/TF1 (1x54).
3. At step 15 the UE shall return
- for sub-test 1: an RLC SD... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.11 Conversational / speech / UL:4.75 DL:4.75 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.11.1 Conformance requirement | See clause 14.2.4.1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.11.2 Test purpose | To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.1.11. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.11.3 Method of test | Uplink TFS:
TFI
RB5
(RAB subflow #1)
RB6
(RAB subflow #2)
RB7
(RAB subflow #3)
DCCH
TFS
TF0, bits
0x49
0x53
0x60
0x148
TF1, bits
1x39
1x53
N/A
1x148
TF2, bits
1x42
N/A
N/A
N/A
Uplink TFCS:
TFCI
(RB5, RB6, RB7, DCCH)
UL_TFC0
(TF0, TF0, TF0, TF0)
UL_TFC1
(TF1, TF0, TF0, TF0)
UL_TFC2
(TF2, TF1, TF0, TF0)
UL_TFC3
(TF0, TF0... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.11.4 Test requirements | See clause 14.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
- for sub-test 1: RB5/TF1 (1x39).
- for sub-test 2: RB5/TF2 (1x42) and RB6/TF1 (1x53).
3. At step 15 the UE shall return
- for sub-test 1: an... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.12 Conversational / unknown / UL:28.8 DL:28.8 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.12.1 Conformance requirement | See 14.2.4.1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.12.2 Test purpose | To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.1.12. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.12.3 Method of test | Initial Conditions
The following RLC Info parameter values shall be set by the SS:
Uplink RLC
TM RLC
Transmission RLC discard
CHOICE SDU Discard Mode
Timer based no explicit
Timer_discard
100ms
Segmentation indication
FALSE
Downlink RLC
TM RLC
Segmentation indication
FALSE
NOTE: 'Timer based discard without explicit s... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.12.4 Test requirements | See clause 14.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
- for sub-test 1: RB5/TF1 (1x576).
- for sub-test 2: RB5/TF2 (2x576) or RB5/TF1 (1x576).
3. At step 15 the UE shall return
- for sub-test 1: ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.13 Conversational / unknown / UL:64 DL:64 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.13.1 Conversational / unknown / UL:64 DL:64 kbps / CS RAB / 20 ms TTI | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.13.1.1 Conformance requirement | See clause 14.2.4.1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.13.1.2 Test purpose | To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.1.13 for the 20 ms TTI case. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.13.1.3 Method of test | Initial Conditions
The following RLC Info parameter values shall be set by the SS:
Uplink RLC
TM RLC
Transmission RLC discard
CHOICE SDU Discard Mode
Timer based no explicit
Timer_discard
100ms
Segmentation indication
FALSE
Downlink RLC
TM RLC
Segmentation indication
FALSE
NOTE: Timer based discard without explicit si... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.13.1.4 Test requirements | See clause 14.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
- for sub-test 1: RB5/TF1 (2x640).
3. At step 15 the UE shall return
- for sub-test 1: two RLC SDUs on RB5 having the same content as sent by... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.13.2 Conversational / unknown / UL:64 DL:64 kbps / CS RAB / 40 ms TTI | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.13.2.1 Conformance requirement | See clause 14.2.4.1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.13.2.2 Test purpose | To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.1.13 for the 40 ms TTI case. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.13.2.3 Method of test | Initial Conditions
The following RLC Info parameter values shall be set by the SS:
Uplink RLC
TM RLC
Transmission RLC discard
CHOICE SDU Discard Mode
Timer based no explicit
Timer_discard
100ms
Segmentation indication
FALSE
Downlink RLC
TM RLC
Segmentation indication
FALSE
NOTE: Timer based discard without explicit si... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.13.2.4 Test requirements | See 14.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
- for sub-test 1: RB5/TF1 (4x640).
3. At step 15 the UE shall return
- for sub-test 1: four RLC SDUs on RB5 having the same content as sent by SS. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.14 Conversational / unknown / UL:32 DL:32 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.14.1 Conversational / unknown / UL:32 DL:32 kbps / CS RAB / 20 ms TTI | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.14.1.1 Conformance requirement | See 14.2.4.1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.14.1.2 Test purpose | To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.1.14 for the 20 ms TTI case. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.14.1.3 Method of test | Initial Conditions
The following RLC Info parameter values shall be set by the SS:
Uplink RLC
TM RLC
Segmentation indication
FALSE
Downlink RLC
TM RLC
Segmentation indication
FALSE
Uplink TFS:
TFI
RB5
(32 kbps)
DCCH
TFS
TF0, bits
0x640
0x148
TF1, bits
1x640
1x148
Uplink TFCS:
TFCI
(RB5, DCCH)
UL_TFC0
(TF0, TF0)
UL_TFC1... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.2.14.1.4 Test requirements | 1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
- for sub-test 1: RB5/TF1 (1x640).
3. At step 15 the UE shall return
- for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.