hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.1.5 Test requirements | At step 2a the UE shall send an RRC CONNECTION REQUEST message with the IE Establishment cause set to "Registration".
At step 10a the UE shall send an RRC CONNECTION REQUEST message with the IE Establishment cause set to "Detach".
At step3, when the UE is powered on or switched on, UE shall:
- initiate the PS attach pr... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.2 Service Request Initiated by Network Procedure | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.2.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.2.2 Conformance requirement | When the UE receives a paging request for PS domain from the network in PMM-IDLE mode, the UE shall send the SERVICE REQUEST message to the network.
Reference
TS 24.008 clauses 4.7.13
TS 23.060 clauses 6.12.2 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.2.3 Test purpose | To test the behaviour of the UE if the UE receives the paging request for PS domain service from the network. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.2.4 Method of test | Initial condition
System Simulator:
One cell operating in network operation mode II.
The SIB1 IE "CN domain specific NAS system information", for the CS Domain, is set to value "00 00" (T3212 value is set to 0 and ATT flag is set to FALSE to prevent repeated CS domain registration and/or IMSI Detach by UEs in operation... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.2.5 Test requirements | At step 2a the UE shall send an RRC CONNECTION REQUEST message with the IE Establishment cause set to "Registration".
At step 6a the UE shall send an RRC CONNECTION REQUEST message with the IE Establishment cause set to "Terminating interactive Call".
At step 10a the UE shall send an RRC CONNECTION REQUEST message with... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.3 Service Request / rejected / Illegal MS | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.3.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.3.2 Conformance requirement | If the network rejects a service request procedure from the UE with the cause "Illegal MS", the UE shall:
1) set the GPRS update status to GU3 ROAMING NOT ALLOWED and enter state GMM DEREGISTRATED. A UE operating in MS operation A shall in addition to set the update status to U3 ROAMING NOT ALLOWED.
2) delete any P-TMS... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.3.3 Test purpose | To test the behaviour of the UE if the network rejects the service request procedure with the cause "Illegal MS". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.3.4 Method of test | Initial condition
System Simulator:
One cell operating in network operation mode II.
The SIB1 IE "CN domain specific NAS system information", for the CS Domain, is set to value "00 00" (T3212 value is set to 0 and ATT flag is set to FALSE).
User Equipment:
The UE has a valid P-TMSI-1, RAI-1 and IMSI.
The UE has been re... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.3.5 Test requirements | At step4, when the UE is powered on or switched on, UE shall:
- initiate the PS attach procedure with information elements specified in the above Expected Sequence.
At step11, when the UE receives the SERVICE REJECT message with cause "Illegal MS" UE shall:
• not attempt to access the network.
At step15, when the UE is... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.4 Service Request / rejected / PS services not allowed | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.41 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.4.2 Conformance requirement | If the network rejects a service request procedure from the UE with the cause "GPRS services not allowed", the UE shall:
1) set the GPRS update state to GU3 ROAMING NOT ALLOWED.
2) delete any P-TMSI, P-TMSI signature, RAI and GPRS ciphering key sequence number.
3) consider the USIM as invalid for PS service until the U... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.4.3 Test purpose | To test the behaviour of the UE if the network rejects the service request procedure with the cause "GPRS services not allowed in this PLMN". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.4.4 Method of test | Initial condition
System Simulator:
One cell operating in network operation mode II.
The SIB1 IE "CN domain specific NAS system information", for the CS Domain, is set to value "00 00" (T3212 value is set to 0 and ATT flag is set to FALSE).
User Equipment:
The UE has a valid P-TMSI-1 and RAI-1.
The UE has been register... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.4.5 Test requirements | At step4, when the UE is powered on or switched on, UE shall:
- initiate the PS attach procedure with information elements specified in the above Expected Sequence.
At step11, when the UE receives the SERVICE REJECT message with cause "GPRS services not allowed" UE shall:
• not attempt to access the network.
At step15,... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.5 Service Request / rejected / MS identity cannot be derived by the network | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.5.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.5.2 Conformance requirement | If the network rejects a service request procedure from the UE with the cause "MS identity cannot be derived by the network", the UE shall:
1) set the GPRS update states to GU2 NOT UPDATED.
2) delete any P-TMSI, P-TMSI signature, RAI and GPRS ciphering key sequence number.
3) initiate the PS attach procedure automatica... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.5.3 Test purpose | To test the behaviour of the UE if the network rejects the service request procedure with the cause "MS identity cannot be derived by the network". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.5.4 Method of test | Initial condition
System Simulator:
One cell operating in network operation mode II.
The SIB1 IE "CN domain specific NAS system information", for the CS Domain, is set to value "00 00" (T3212 value is set to 0 and ATT flag is set to FALSE).
User Equipment:
The UE has a valid P-TMSI-1 and RAI-1.
The UE has been register... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.5.5 Test requirements | At step4, when the UE is powered on or switched on, UE shall:
- initiate the PS attach procedure with information elements specified in the above Expected Sequence.
At step11, when the UE receives the SERVICE REJECT message with cause "MS identity cannot be derived by the network" UE shall:
- initiate PS attach procedu... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.6 Service Request / rejected / PLMN not allowed | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.6.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.6.2 Conformance requirement | If the network rejects a service request procedure from the UE with the cause "PLMN not allowed", the UE shall:
1) delete any RAI, P-TMSI, P-TMSI signature and GPRS ciphering key sequence number.
2) set the GPRS update status to GU3 ROAMING NOT ALLOWED.
3) store the PLMN identity in the appropriate forbidden list.
Refe... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.6.3 Test purpose | To test the behaviour of the UE if the network rejects the service request procedure with the cause "PLMN not allowed". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.6.4 Method of test | Initial condition
System Simulator:
Two cells (not simultaneously activated), cell A in MCC1/MNC2/LAC1/RAC1 (RAI-8, Not HPLMN), cell B in MCC2/MNC1/LAC1/RAC1 (RAI-2, Not HPLMN).
All two cells are operating in network operation mode II.
The SIB1 IE "CN domain specific NAS system information", for the CS Domain, is set t... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.6.5 Test requirements | At step4, when the UE is powered on or switched on, UE shall:
- initiate the PS attach procedure with information elements specified in the above Expected Sequence.
At step9, when the UE receives the SERVICE REJECT message with cause "PLMN not allowed", UE shall:
- not perform a PS attach procedure in the same PLMN.
At... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.8 Service Request / Abnormal cases / Access barred due to access class control | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.8.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.8.2 Conformance requirement | If the UE access class X is barred, the UE shall:
1) not start Service Request procedure.
2) stay in the current serving cell.
3) apply normal cell reselection process.
If the UE access class X is granted or serving cell is changed, the UE may:
1) start Service Request procedure.
Reference
TS 24.008 clauses 4.7.13.5. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.8.3 Test purpose | To test the behaviour of the UE in case of access class control (access is granted). |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.8.4 Method of test | Initial condition
A random access class X (0-15) is selected. The USIM is programmed with this access class X.
System Simulator:
One cell operating in network operation mode II.
The SIB1 IE "CN domain specific NAS system information", for the CS Domain, is set to value "00 00"
(T3212 value is set to 0 and ATT flag is s... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.8.5 Test requirements | At step 8a, when the UE access class x is barred, UE shall:
- not perform Service Request procedure.
At step9, UE shall:
- perform Service Request procedure. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.9 Service Request / Abnormal cases / Routing area update procedure is triggered | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.9.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.9.2 Conformance requirement | If a cell change into a new routing area occurs and the necessity of routing area update procedure is determined before the security mode control procedure is completed, the UE shall:
- abort Service request procedure.
- start routing area update procedure immediately.
Reference
TS 24.008 clause 4.7.13.5 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.9.3 Test purpose | To test the behaviour of the UE in case of collision between Routing area update procedure and Service request procedure. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.9.4 Method of test | Initial condition
System Simulator:
One cell with MCC1/MNC1/LAC1/RAC1 (RAI-1)
The cell is operating in network operation mode II .
The SIB1 IE "CN domain specific NAS system information", for the CS Domain, is set to value "00 00" (T3212 value is set to 0 and ATT flag is set to FALSE).
User Equipment:
The UE has a vali... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.9.5 Test requirements | At step 4, the UE shall send an ATTACH REQUEST message
At step 7, the UE shall send a SERVICE REQUEST message with Service type = "signalling".
At step 8, as the UE has received a new RAI in the UTRAN MOBILITY INFORMATION message before the SERVICE ACCEPT message or the SERVICE REJECT message is received, the UE shall ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.10 Service Request / Abnormal cases / Power off | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.10.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.10.2 Conformance requirement | When the UE in GMM-SERVICE-REQUEST-INITIATED state is switched off, UE shall:
- perform PS detach procedure.
Reference
TS 24.008 clauses 4.7.13.5 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.10.3 Test purpose | To test the behaviour of the UE in case of collision between Service request procedure and "powered off". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.10.4 Method of test | Initial condition
System Simulator:
One cell operating in network operation mode II.
The SIB1 IE "CN domain specific NAS system information", for the CS Domain, is set to value "00 00"
(T3212 value is set to 0 and ATT flag is set to FALSE).
User Equipment:
The UE has a valid P-TMSI-1 and RAI-1.
The UE has been register... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.10.5 Test requirements | At step4, when the UE is powered on or switched on, UE shall:
- initiate the PS attach procedure with information elements specified in the above Expected Sequence.
At step7, UE shall:
- perform the service request procedure
At step9, when the UE is switched off during the Service Request procedure, UE shall;
- abort ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.11 Service Request / Abnormal cases / Service request procedure collision | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.11.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.11.2 Conformance requirement | Abnormal cases in the MS
The following abnormal cases can be identified:
- Procedure collision
If the MS receives a DETACH REQUEST message from the network in state GMM-SERVICE-REQUEST-INITIATED, the GPRS detach procedure shall be progressed and the Service request procedure shall be aborted. If the cause IE, in the DE... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.11.3 Test purpose | To test the behaviour of the UE in case of collision between Service request procedure and PS detach procedure. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.11.4 Method of test | Initial condition
System Simulator:
One cell operating in network operation mode II.
The SIB1 IE "CN domain specific NAS system information", for the CS Domain, is set to value "00 00"
(T3212 value is set to 0 and ATT flag is set to FALSE).
User Equipment:
The UE has a valid P-TMSI-1 and RAI-1.
The UE has been register... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.11.5 Test requirements | At step4, when the UE is powered on or switched on, UE shall:
- initiate the PS attach procedure with information elements specified in the above Expected Sequence.
At step11, when the UE receives a DETACH REQUEST message from the network before the Service request procedure completes, UE shall;
- repeat the attach pro... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.12 Service Request / RAB re-establishment / UE initiated / Single PDP context | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.12.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.12.2 Conformance requirement | The following procedures shall be performed in the MS when radio coverage is lost:
- For a PDP context using background or interactive traffic class, the PDP context is preserved even if RRC re-establishment procedures have failed.
- For a PDP context using streaming or conversational traffic class, the PDP context is ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.12.3 Test purpose | To verify that the UE initiates a Service request procedure due to uplink data transmission with one preserved PDP context with traffic class "Background class" after normal RRC connection release as well as when radio coverage is lost.
To verify that the radio access bearer can be re-established for the preserved PDP... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.12.4 Method of test | Initial condition
System Simulator:
One cell, default parameters.
The SIB1 IE "CN domain specific NAS system information", for the CS Domain, is set to value "00 00" (T3212 value is set to 0 and ATT flag is set to FALSE).
User Equipment:
The UE is in GMM-state "GMM-REGISTERED, normal service" with valid P-TMSI and CKSN... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.12.5 Test requirements | After steps 7 and 14, UE shall:
- transmit a SERVICE REQUEST message with service type "data" |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.13 Service Request / RAB re-establishment / UE initiated / multiple PDP contexts | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.13.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.13.2 Conformance requirement | The following procedures shall be performed in the MS when the RRC layer indicate to higher layer that a RAB has been released and the RAB release was not initiated due to a PDP Context Deactivation Procedure:
- For a PDP context using background or interactive traffic class, the PDP context is be preserved with no mod... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.13.3 Test purpose | To verify that the UE initiates a Service request procedure due to uplink data transmission with two PDP contexts with different traffic classes are activated, when one is of traffic class "background class" and the other is of traffic class "interactive class", after normal RRC connection release.
To verify that the r... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.13.4 Method of test | Initial condition
System Simulator:
One cell, default parameters.
The SIB1 IE "CN domain specific NAS system information", for the CS Domain, is set to value "00 00" (T3212 value is set to 0 and ATT flag is set to FALSE).
User Equipment:
The UE is in GMM-state "GMM-REGISTERED, normal service" with valid P-TMSI and CKSN... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.13.5 Test requirements | After step 11, UE shall:
- transmit a SERVICE REQUEST message with service type "data". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.14 Service Request / RAB re-establishment / Network initiated / single PDP context | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.14.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.14.2 Conformance requirement | The following procedures shall be performed in the MS when the RRC layer indicate to higher layer that a RAB has been released and the RAB release was not initiated due to a PDP Context Deactivation Procedure:
- For a PDP context using background or interactive traffic class, the PDP context is be preserved with no mod... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.14.3 Test purpose | To verify that the radio access bearers can be re-established for the preserved PDP context with traffic class "Background class", when initiated from the network, after normal RRC connection release. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.14.4 Method of test | System Simulator:
One cell, default parameters.
The SIB1 IE "CN domain specific NAS system information", for the CS Domain, is set to value "00 00" (T3212 value is set to 0 and ATT flag is set to FALSE).
User Equipment:
The UE is in GMM-state "GMM-REGISTERED, normal service" with valid P-TMSI and CKSN.
Related ICS/IXIT... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.14.5 Test requirements | After step 8, UE shall:
- transmit a SERVICE REQUEST with service type "Paging response" |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.15 Service Request / abnormal cases / access barred due to domain specific access restriction for PS domain | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.15.1 Definition | This test case is applicable for Rel-5 UEs supporting DSAC and Rel-6 or later UEs. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.15.2 Conformance requirement | TS24.008 4.1.1.2.2
If the PS or CS domain is barred because of domain specific access control, a GPRS MS operating in mode A or B in a network that operates in mode II or III shall use the MM specific procedures or GMM specific procedures, respectively, in the domain which is unbarred. If the MS detects that a domain c... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.15.3 Test purpose | To test the behaviour of the UE in case of domain specific access control for PS domain. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.15.4 Method of test | Initial condition
A PS domain specific access class X (0-15) is arbitrary selected. The USIM is programmed with this access class X.
System Simulator:
One cell operating in network operation mode II.
The SIB1 IE "CN domain specific NAS system information", for the CS Domain, is set to value "00 00" (T3212 value is set ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.15.5 Test requirements | At step14, when the SS indicates that PS domain specific access class X is barred, the UE shall:
- not perform Service Request procedure.
At step21, when the SS indicates that PS domain specific access class X is not barred, the UE shall:
- perform Service Request procedure. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.16 MBMS SERVICE REQUEST / counting / MBMS Selected Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.16.1 Definition | This Test is applicable for all Rel-6 UEs supporting MBMS broadcast services. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.16.2 Conformance requirement | The purpose of this procedure is to transfer the PMM mode from PMM-IDLE to PMM-CONNECTED mode, and/or to assign radio access bearer in case of PDP contexts are activated without radio access bearer assigned. In latter case, the PMM mode may be PMM-IDLE mode or may alternatively be the PMM-CONNECTED mode if the MS requi... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.16.3 Test purpose | To test the behaviour of the UE that, when MBMS Modified services Information is sent with “MBMS required UE action” IE set to “Acquire counting info”, then UE initiates a Service Request procedure. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.16.4 Method of test | Initial condition
System Simulator:
One MBMS cell operating in network operation mode I.
User Equipment:
The UE is in GMM-state "GMM-REGISTERED, normal service" with valid P-TMSI and CKSN.
The UE is interested in the selected service to be provided by the SS (included in MBMS_ACTIVATED_SERVICES variable).
Related ICS/I... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.16.5 Test requirements | 1. At step 2, the UE initiates a service request procedure with the ‘Service type’ set to ‘MBMS Broadcast Service Reception’.
12.9.16m MBMS SERVICE REQUEST / counting / MBMS Multicast Service
12.9.16m.1 Definition
This test is applicable for all UEs that support MBMS multicast services.
12.9.16m.2 Conformance requireme... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.17 MBMS SERVICE REQUEST / point to point RBs / MBMS Selected Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.17.1 Definition | This Test is applicable for all Rel-6 UEs supporting MBMS broadcast services. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.17.2 Conformance requirement | The purpose of this procedure is to transfer the PMM mode from PMM-IDLE to PMM-CONNECTED mode, and/or to assign radio access bearer in case of PDP contexts are activated without radio access bearer assigned. In latter case, the PMM mode may be PMM-IDLE mode or may alternatively be the PMM-CONNECTED mode if the MS requi... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.17.3 Test purpose | To test the behaviour of the UE that, when MBMS Modified services Information is sent with “MBMS required UE action” IE set to “Request PTP RB”, then UE initiates a Service Request procedure. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.17.4 Method of test | Initial condition
System Simulator:
One MBMS cell operating in network operation mode I.
User Equipment:
The UE is in GMM-state "GMM-REGISTERED, normal service" with valid P-TMSI and CKSN.
The UE is interested in the selected service to be provided by the SS (included in MBMS_ACTIVATED_SERVICES variable).
Related ICS/I... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 12.9.17.5 Test requirements | 1. At step 2, the UE initiates a service request procedure with the ‘Service type’ set to ‘MBMS Broadcast Service Reception’.
12.9.17m MBMS SERVICE REQUEST / point to point RBs / MBMS Multicast Service
12.9.17m.1 Definition
This Test is applicable for all Rel-6 UEs supporting MBMS multicast services.
12.9.17m.2 Conform... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 13 General Tests | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 13.1 Emergency call / general | In this clause, the emergency call service is tested for user equipment that support Emergency speech call in the following cases:
- emergency call initiated in the MM idle state with authentication and with security mode procedure applied;
- emergency call initiated in the MM idle, no IMSI state (hence without authent... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 13.2 Emergency call | Emergency call establishment can be initiated by an UE whether location updating has been successful or not and whether a USIM is inserted into the UE or not; but only if the UE is equipped for speech.
If the procedures tested in this clause are not correctly implemented in the UE, establishment, maintenance and cleari... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 13.2.1 Emergency call / with USIM | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 13.2.1.1 Emergency call / with USIM / accept case | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 13.2.1.1.1 Definition | When a USIM is present, subscriber specific emergency call set-up MMI shall be provided. The operator shall specify preferred emergency call MMI(s) (e.g. 911 for US citizens or 110, 118 and 119 for Japanese citizens) for use in any (i.e. home or visited) PLMN. This shall be stored in the USIM and the UE shall read thi... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 13.2.1.1.2 Conformance requirement | 1) A MM connection for an emergency call may be established in all states of the mobility management sublayer which allow MM connection establishment for a normal originating call.
When a user requests an emergency call establishment the UE will send a CM SERVICE REQUEST message to the network with a CM service type in... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 13.2.1.1.3 Test purpose | 1) To verify that an UE supporting speech in the state "MM idle", when made to call the emergency call number, sends a CM SERVICE REQUEST message specifying the correct CKSN and TMSI, with CM service type IE "emergency call establishment".
2) To verify that after security mode setting by the SS, the UE sends an EMERGEN... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 13.2.1.1.4 Method of test | Initial Conditions
- System Simulator:
- 1 cell, default parameters.
- User Equipment:
- the UE is in state "MM idle" with valid TMSI and CKSN.
Related ICS/IXIT Statement(s)
- Emergency speech call yes/no
Test procedure
The UE is made to initiate an emergency call. Having reached the active state, the call is cleared ... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.