hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.3.3 Method of test | See 14.7.1.3. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.3.4 Test requirements | See 14.7.1.4.
14.7.3a Streaming or interactive or background / UL: [max bit rate depending on UE category and TTI] DL: [max bit rate depending on UE category] with Flexible RLC, MAC-ehs and MAC-i/is / PS RAB + UL: [max bit rate depending on UE category and TTI] DL: [max bit rate depending on UE category] SRBs for DCCH ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.4 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Streaming or interactive or background / UL: [max bit rate depending on UE category and TTI] DL: [max bit rate depending on UE category] / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.4.1 Conformance requirement | See 14.7.1.1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.4.2 Test purpose | For the reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.6.4:
1. To verify that the UE is able to establish the radio bearer combination.
2 To verify correct data transfer using all the possible MAC-d PDU sizes of the transport channel mapped to E-DCH in combination with the possible TFCI... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.4.3 Method of test | NOTE: The reference to E-DCH Category refers to the UE capability as signalled in the Rel-6 IE “E-DCH physical layer category”. All UEs supporting E-DCH should signal a category between 1 and 6 for this IE even if the UE physical capability category is above 6.
NOTE: The reference to HS-DSCH Categories refers to the UE... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.4.4 Test requirements | See 14.1.4.1 for definition of step 12 and step 18.
1. At step 12 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At steps 17 to 20 the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the sub-test.
3. At step 18 and for each radio bearer where test data is sent in downlink... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.5 Streaming or interactive or background / UL:[max bit rate depending on UE category and TTI] DL: [max bit rate depending on UE category] kbps / PS RAB + Streaming or interactive or background / UL: [max bit rate depending on UE category and TTI] DL: [max bit rate depending on UE category] / PS RAB + UL:[max bit r... | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.5.1 Conformance requirement | See 14.7.1.1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.5.2 Test purpose | For the reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.6.5:
1. To verify that the UE is able to establish the radio bearer combination.
2 To verify correct data transfer using all the possible MAC-d PDU sizes of the transport channel mapped to E-DCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.5.3 Method of test | NOTE: The reference to E-DCH Category refers to the UE capability as signalled in the Rel-6 IE “E-DCH physical layer category”. All UEs supporting E-DCH should signal a category between 1 and 6 for this IE even if the UE physical capability category is above 6.
NOTE: The reference to HS-DSCH Categories refers to the UE... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.5.4 Test requirements | See 14.1.4.1 for definition of step 12 and step 18.
1. At step 12 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 18 the UE shall return a RLC SDU on RB5 and RB6 with same content as sent in downlink. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.6 Conversational / unknown or speech / UL:[max bit rate depending on UE category and TTI] DL: [max bit rate depending on UE category] kbps / PS RAB + Streaming or Interactive or background / UL: [max bit rate depending on UE category and TTI] DL: [max bit rate depending on UE category] / PS RAB + UL:[max bit rate ... | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.6.1 Conformance requirement | See 14.7.1.1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.6.2 Test purpose | For the reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.6.6:
1. To verify that the UE is able to establish the radio bearer combination.
2 To verify correct data transfer using all the possible MAC-d PDU sizes of the transport channel mapped to E-DCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.6.3 Method of test | NOTE: The reference to E-DCH Category refers to the UE capability as signalled in the Rel-6 IE “E-DCH physical layer category”. All UEs supporting E-DCH should signal a category between 1 and 6 for this IE even if the UE physical capability category is above 6.
NOTE: The reference to HS-DSCH Categories refers to the UE... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.6.4 Test requirements | See 14.1.4.1 for definition of step 12 and step 18.
1. At step 12 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 18 the UE shall return a RLC SDU on RB5 and RB6 with same content as sent in downlink. For the case the returned UL RLC SDU size under test is smaller than the sent DL RLC SDU size then the payloa... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.7.1 Conformance requirement | See 14.7.1.1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.7.2 Test purpose | For the reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.6.7:
1. To verify that the UE is able to establish the radio bearer combination.
2 To verify correct data transfer using all the possible MAC-d PDU sizes of the transport channel mapped to E-DCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.7.3 Method of test | NOTE: The reference to E-DCH Category refers to the UE capability as signalled in the Rel-6 IE “E-DCH physical layer category”. All UEs supporting E-DCH should signal a category between 1 and 6 for this IE even if the UE physical capability category is above 6.
NOTE: The reference to HS-DSCH Categories refers to the UE... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.7.4 Test requirements | See 14.1.4.1 for definition of step 12 and step 18.
1. At step 12 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 18 the UE shall return a RLC SDU on RB5, RB6 and RB7 with same content as sent in downlink. For the case the returned UL RLC SDU size under test is smaller than the sent DL RLC SDU size then the p... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.8 Conversational / speech / UL:(12.65 8.85 6.6) DL:(12.65 8.85 6.6) kbps / CS RAB + Streaming or interactive or background / UL: [max bit rate depending on UE category and TTI] DL: [max bit rate depending on UE category] / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH + DL:0.15 kbps SRB#5 for DCCH | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.8.1 Conformance requirement | See 14.7.1.1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.8.2 Test purpose | For the reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.6.8:
1. To verify that the UE is able to establish the radio bearer combination.
2 To verify correct data transfer using all the possible MAC-d PDU sizes of the transport channel mapped to E-DCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.8.3 Method of test | NOTE: The reference to E-DCH Category refers to the UE capability as signalled in the Rel-6 IE “E-DCH physical layer category”. All UEs supporting E-DCH should signal a category between 1 and 6 for this IE even if the UE physical capability category is above 6.
NOTE: The reference to HS-DSCH Categories refers to the UE... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.8.4 Test requirements | See 14.1.4.2 for definition of step numbers. For each sub-test:
1. At step 20 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At steps 26 the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the sub-test.
3. At step 26 and for each radio bearer where test data is sent in do... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.9 Conversational / speech / UL:(12.2, 7.95, 5.9, 4.75) kbps DL: (12.2, 7.95, 5.9, 4.75) kbps / CS RAB on E-DCH and HS-DSCH + UL: [max bit rate depending on UE category and TTI] DL: [max bit rate depending on UE category] SRBs for DCCH on E-DCH and HS-DSCH | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.9.1 Conformance requirement | See 14.7.1.1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.9.2 Test purpose | To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.6.9 (Alt.2) |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.9.3 Method of test | The following parameters are specific for this test case:
E-DCH
Category
RLC Transmission window size
Modulation Scheme
1
512
QPSK
2
512
3
512
4
512
5
1536
6
1536
7
1536
HS-DSCH
Category
Number of HARQ processes
RLC Receiving window size
1
2
512
2
2
512
3
3
512
4
3
512
5
6
512
6
6
512
7
6
1536
8
6
1536
9
6
2047
10
6
20... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.9.4 Test requirements | See 14.1.4.1a for definition of step 12 and step 18.
1. At step 12 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 18 the UE shall return a RLC SDU on RB5 with same content as sent in downlink. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.10 Conversational / speech / UL:(12.65, 8.85, 6.6) kbps DL: (12.65, 8.85, 6.6) kbps / CS RAB on E-DCH and HS-DSCH + UL: [max bit rate depending on UE category and TTI] DL: [max bit rate depending on UE category] SRBs for DCCH on E-DCH and HS-DSCH | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.10.1 Conformance requirement | See 14.7.1.1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.10.2 Test purpose | To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.6.10 (Alt.2) |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.10.3 Method of test | The following parameters are specific for this test case:
E-DCH
Category
RLC Transmission window size
Modulation Scheme
1
512
QPSK
2
512
3
512
4
512
5
1536
6
1536
7
1536
HS-DSCH
Category
Number of HARQ processes
RLC Receiving window size
1
2
512
2
2
512
3
3
512
4
3
512
5
6
512
6
6
512
7
6
1536
8
6
1536
9
6
2047
10
6
20... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.10.4 Test requirements | See 14.1.4.1a for definition of step 12 and step 18.
1. At step 12 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 18 the UE shall return a RLC SDU on RB5 with same content as sent in downlink. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.11 Streaming or interactive or background / UL: [max bit rate depending on UE category and TTI] DL: [max bit rate depending on UE category] / PS RAB + UL: [max bit rate depending on UE category and TTI] DL: [max bit rate depending on UE category] SRBs for DCCH on E-DCH and HS-DSCH for enhanced uplink/downlink in C... | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.11.1 Conformance requirement | Conformance requirement
See 14.7.1.1 |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.11.2 Test purpose | For the reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.6.3:
1. To verify that the UE is able to establish the radio bearer combination.
2 To verify correct data transfer using all the possible MAC-d PDU sizes of the transport channel mapped to common E-DCH in CELL_FACH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.11.3 Method of test | NOTE 1: The reference to E-DCH Category refers to the UE capability as signalled in the Rel-6 IE “E-DCH physical layer category”. All UEs supporting E-DCH should signal a category between 1 and 6 for this IE even if the UE physical capability category is above 6.
NOTE 2: The reference to HS-DSCH Categories refers to th... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 14.7.11.4 Test requirements | See 14.1.5.1 for definition of step 12 and step 18.
1. At step 12 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 18 the UE shall return a RLC SDU with same content as sent in downlink.
14.7.11a Streaming or interactive or background / UL: [max bit rate depending on UE category and TTI] DL: [max bit rate depe... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.1 CLIP | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.1.1 CLIP / Normal operation | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.1.1.1 Definition | To test that the UE correctly presents to the user the calling number. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.1.1.2 Conformance requirements | The calling line identity consists of a calling party BCD number and optionally, a calling party subaddress and/or a cause of no CLI.
The calling party BCD number information element is made up of a number of information units as indicated in 3GPP TS 24.008.
In addition to or instead of the calling party's digits, the ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.1.1.3 Test purpose | To verify the ability of a UE to receive and decode the calling number in the incoming SETUP message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.1.1.4 Method of test | Initial Conditions
- System simulator:
- 1 cell, default parameters.
- User Equipment:
- the UE shall be in MM-state "Idle, updated";
Related ICS/IXIT Statements
Support of FDD Yes/No.
Support of CS speech Yes/No.
Support of MT circuit switched basic service Yes/No.
Support of Calling Line Identification Presentation Y... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.1.1.5 Test requirements | In step 10 the UE shall display the correct calling party BCD number. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.2 CLIR | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.2.1 CLIR / Normal operation - requesting presentation of CLI | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.2.1.1 Definition | To test that when the CLIR presentation mode is temporary (presentation restricted), it is possible for the subscriber to present his CLI on a per call basis. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.2.1.2 Conformance requirements | When the CLIR presentation mode is temporary (presentation restricted), it is possible for the subscriber to present his CLI on a per call basis. The MS shall send a CLIR suppression information element to the network.
If the subscriber tries to override CLIR (i.e. requests that the CLI is displayed), when he has subsc... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.2.1.3 Test purpose | To verify the ability of a UE to present his CLI on a per call basis when the CLIR presentation mode is temporary (presentation restricted). |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.2.1.4 Method of test | Initial Conditions
- System simulator:
- 1 cell, default parameters.
- User Equipment:
- the UE shall be in MM-state "Idle, updated";
Related ICS/IXIT Statements
Support of FDD Yes/No.
Support of CS speech Yes/No.
Support of MO circuit switched basic service Yes/No.
Support of Calling Line Identification Restriction Ye... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.2.1.5 Test requirements | In step 9 UE Shall include the CLIR suppression IEI. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.2.2 CLIR / Normal operation - requesting restriction of CLI presentation | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.2.2.1 Definition | To test that when the CLIR presentation mode is temporary (presentation allowed), it is possible for the subscriber to present the CLI on a per call basis. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.2.2.2 Conformance requirements | When the CLIR presentation mode is temporary (presentation allowed), it is possible for the subscriber to restrict the CLI on a per call basis. The MS shall send a CLIR invocation information element to the network.
If the subscriber has not subscribed to CLIR and tries to invoke CLIR (i.e. requests that the CLI is not... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.2.2.3 Test purpose | To verify the ability of a UE to restrict the CLI on a per call basis when the presentation mode is temporary (presentation allowed). |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.2.2.4 Method of test | Initial Conditions
- System simulator:
- 1 cell, default parameters.
- User Equipment:
- the UE shall be in MM-state "Idle, updated";
Related ICS/IXIT Statements
Support of FDD Yes/No.
Support of CS speech Yes/No.
Support of MO circuit switched basic service Yes/No.
Support of Calling Line Identification Restriction Ye... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.2.2.5 Test requirements | In step 9 UE Shall include the CLIR invocation IEI. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.3 CNAP | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.3.1 CNAP/Normal Operation – Name indication contained in Setup message | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.3.1.1 Definition | To check that the UE presents the calling name identity correctly when name indication is sent in SETUP message to UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.3.1.2 Conformance requirement | The calling name identity is made up of calling party's name - up to 80 characters.
The UE shall be given one of the following in the name indicator:
- calling name identity;
- presentation indicator of presentation restricted;
- presentation indicator of name unavailable; or
- calling name identity and presentation re... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.3.1.3 Test purpose | To verify that the UE presents to the user the name information of the calling party at call setup time, when name indication is sent in SETUP message, for all incoming calls. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.3.1.4 Method of test | Related ICS/IXIT statements
Support of FDD Yes/No.
Support of CS speech Yes/No.
Support of MT circuit switched basic service Yes/No.
Support Calling name presentation Yes/No.
Description of display for CNAP.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state “idle, up... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.3.1.5 Test requirements | In step 10 the UE displays the calling name Indicator received at step 7. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.3.2 CNAP/Normal Operation – Name indication contained in Facility message | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.3.2.1 Definition | To check that the UE presents the calling name identity correctly when name indication is sent in FACILITY message to UE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.3.2.2 Conformance requirement | The calling name identity is made up of calling party's name - up to 80 characters.
The UE shall be given one of the following in the name indicator:
- calling name identity;
- presentation indicator of presentation restricted;
- presentation indicator of name unavailable; or
- calling name identity and presentation re... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.3.2.3 Test purpose | To verify that the UE presents to the user the name information of the calling party at call setup time, when name indication is sent in FACILITY message, for all incoming calls. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.3.2.4 Method of test | Related ICS/IXIT statements
Support of FDD Yes/No.
Support of CS speech Yes/No.
Support of MT circuit switched basic service Yes/No.
Support Calling name presentation Yes/No.
Description of display for CNAP.
Initial conditions
System Simulator:
1 cell, default parameters.
User Equipment:
The UE is in MM-state “idle, up... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.3.2.5 Test requirements | In step 11 the UE displays the calling name Indicator received at step 10. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.3.3 CNAP/Interrogation accepted | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.3.3.1 Definition | To check that the UE requests the status of CNAP from SS by interrogate procedure and displays the response received from SS. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.3.3.2 Conformance requirement | The mobile subscriber can request the status of the supplementary service by interrogation procedure and be informed if the service is provided to him/her.
MS Network
REGISTER
------------------------------------------------------------------------------------------------------->
Facility (Invoke = I... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.3.3.3 Test purpose | To test the correct operation of the interrogation procedure and in case of successful interrogation, verify correct display of the response from the SS. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.3.3.4 Method of test | Related ICS/IXIT statements
Support of FDD Yes/No.
Support of CS speech Yes/No.
Support of MO circuit switched basic service Yes/No.
Support Calling name presentation Yes/No.
Description of the user's commands and of display of the answers from the network for interrogation of CNAP.
Initial conditions
System Simulator:... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.3.3.5 Test requirements | In step 6 the UE displays the return result received at step 5. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.3.4 CNAP/Interrogation rejected | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.3.4.1 Definition | To check that the UE requests the status of CNAP from SS by interrogate procedure and displays the response received from SS in case of an error or an invoke problem. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.3.4.2 Conformance requirement | The mobile subscriber can request the status of the supplementary service by interrogation procedure and be informed if the service is provided to him/her.
MS Network
REGISTER
------------------------------------------------------------------------------------------------------->
Facility (Invoke = I... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.3.4.3 Test purpose | To test the correct operation of the interrogation procedure, and correct display of the response from the SS in RELEASE COMPLETE message in case of an error response and an invoke problem. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.3.4.4 Method of test | Related ICS/IXIT statements
Support of FDD Yes/No.
Support of CS speech Yes/No.
Support of MO circuit switched basic service Yes/No.
Support Calling name presentation Yes/No.
Description of the user's commands and of display of the answers from the network for interrogation of CNAP.
Initial conditions
System Simulator:... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.3.4.5 Test requirements | In step 6 the UE displays the response from SS at step 5.
In step 14 the UE displays the response from SS at step 13. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4 Call forwarding | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.1 Call forwarding supplementary services, Registration accepted | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.1.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.1.2 Conformance requirements | A CFU registration request from a mobile user shall include the SS-Code of the forwarding service to be registered and possibly the BasicServiceCode the request applies to. If the BasicServiceCode is not included, the request applies to all basic services.
If the registration is successful, the CFU service will be regi... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.1.3 Test purpose | 1) To check that the UE correctly requests a supplementary service transaction for registration of call forwarding in the CM SERVICE REQUEST.
2) To check that the UE sends a REGISTER message containing the invoke of the RegisterSS operation with the expected parameter values for registration of call forwarding.
3) To c... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.1.4 Method of test | Initial Conditions
- System simulator:
- 1 cell, default parameters.
- User Equipment:
- the UE shall be in MM-state "Idle, updated";
Related ICS/IXIT Statements
Support of FDD Yes/No.
Support of CS speech Yes/No.
Description of the user's commands and of display of the answers from the network for call forwarding
Supp... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.1.5 Test requirements | In Step 2, the UE sends the CM SERVICE REQUEST message with the service type: "Supplementary service activation".
In Step 7, the UE sends the REGISTER message with correct parameters for registration of CFNRy.
In Step 10, the UE provides the appropriate user indication.
In Step 12, the UE sends the CM SERVICE REQUEST m... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.2 Call forwarding supplementary services, Registration rejected | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.2.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.2.2 Conformance requirements | A CFU registration request from a mobile user shall include the SS-Code of the forwarding service to be registered and possibly the BasicServiceCode the request applies to. If the BasicServiceCode is not included, the request applies to all basic services.
If the registration is successful, the CFU service will be regi... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.2.3 Test purpose | 1) To check that the UE correctly requests the establishment of a parallel MM transaction for supplementary service transaction for registration of call forwarding, sending a CM SERVICE REQUEST.
2) To check that the UE sends a REGISTER message containing the invoke of the RegisterSS operation with the expected paramete... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.2.4 Method of test | Initial Conditions
- System simulator:
- 1 cell, default parameters.
- User Equipment:
- the UE shall be in CC state U10.
Related ICS/IXIT Statements
Support of FDD Yes/No.
Support of CS speech Yes/No.
• Description of the user's commands and of display of the answers from the network for call forwarding
• Support of C... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.2.5 Test requirements | In Step 2, the UE sends the CM SERVICE REQUEST message with the service type: "Supplementary service activation".
In Step 4, the UE sends the REGISTER message with correct parameters for registration of CFNRy.
In Step 6, the UE provides the appropriate user indication.
In Step 8, the UE sends the STATUS message with th... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.3 Call forwarding supplementary services, Erasure accepted |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.