hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.3.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.3.2 Conformance requirements | For erasure of any type of call forwarding, the UE shall transmit successively:
1) a CM SERVICE REQUEST with CM service type indicating "supplementary service activation";
2) and then the REGISTER message containing a facility that includes an invoke of the EraseSS operation with the expected parameter values according... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.3.3 Test purpose | 1) To check that the UE correctly requests a supplementary service transaction for erasure of call forwarding in the CM SERVICE REQUEST.
2) To check that the UE sends a REGISTER message containing the invoke of the EraseSS operation with the expected parameter values for erasure of call forwarding.
3) To check that upo... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.3.4 Method of test | Initial Conditions
- System simulator:
- 1 cell, default parameters.
- User Equipment:
- the UE shall be in MM-state "Idle, updated";
Related ICS/IXIT Statements
Support of FDD Yes/No.
Support of CS speech Yes/No.
Description of the user's commands and of display of the answers from the network for call forwarding
Supp... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.3.5 Test requirements | In Step 2, the UE sends the CM SERVICE REQUEST message with the service type: "Supplementary service activation".
In Step 7, the UE sends the REGISTER message with correct parameters for erasure of CFB.
In Step 10a, the UE provides the appropriate user indication.
In Step 12, the UE sends the CM SERVICE REQUEST message... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.4 Call forwarding supplementary services, Erasure rejected | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.4.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.4.2 Conformance requirements | For erasure of any type of call forwarding, the UE shall transmit successively:
1) a CM SERVICE REQUEST with CM service type indicating "supplementary service activation";
2) and then the REGISTER message containing a facility that includes an invoke of the EraseSS operation with the expected parameter values according... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.4.3 Test purpose | 1) To check that the UE correctly requests the establishment of a parallel MM transaction for supplementary service transaction of erasure of call forwarding, sending a CM SERVICE REQUEST.
2) To check that the UE sends a REGISTER message containing the invoke of the EraseSS operation with the expected parameter values ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.4.4 Method of test | Initial Conditions
- System simulator:
- 1 cell, default parameters.
- User Equipment:
- the UE shall be in CC state U10
Related ICS/IXIT Statements
Support of FDD Yes/No.
Support of CS speech Yes/No.
• Description of the user's commands and of display of the answers from the network for call forwarding
• Support of Ca... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.4.5 Test requirements | In Step 2, the UE sends the CM SERVICE REQUEST message with the service type: "Supplementary service activation".
In Step 4, the UE sends the REGISTER message with correct parameters for erasure of CFB.
In Step 6, the UE provides the appropriate user indication.
In Step 8, the UE sends the STATUS message with the corre... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.5 Call forwarding supplementary services, Activation | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.5.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.5.2 Conformance requirements | For activation of any type of call forwarding with any parameters, the MS shall transmit successively
1) a CM SERVICE REQUEST with CM service type indicating "supplementary service activation";
2) and then the REGISTER message containing a facility IE that includes an invoke of the ActivateSS operation with parameter v... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.5.3 Test purpose | 1) To check that the UE correctly requests a supplementary service transaction for activation of call forwarding in the CM SERVICE REQUEST.
2) To check that the UE sends a REGISTER message containing the invocation of the ActivateSS operation with the expected parameter values for activation of call forwarding.
3) To c... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.5.4 Method of test | Initial Conditions
- System simulator:
- 1 cell, default parameters.
- User Equipment:
- the UE shall be in MM-state "Idle, updated";
Related ICS/IXIT Statements
Support of FDD Yes/No.
Support of CS speech Yes/No.
Description of the user's commands and of display of the answers from the network for call forwarding
Supp... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.5.5 Test requirements | In Step 2, the UE sends the CM SERVICE REQUEST message with the service type: "Supplementary service activation".
In Step 7, the UE sends the REGISTER message with correct parameters for activation of CFB.
In Step 10, the UE provides the appropriate user indication.
In Step 12, the UE sends the CM SERVICE REQUEST messa... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.6 Call forwarding supplementary services, Deactivation | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.6.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.6.2 Conformance requirements | For deactivation of any type of call forwarding with any parameters, the MS shall transmit successively:
1) a CM SERVICE REQUEST with CM service type indicating "supplementary service activation";
2) and then the REGISTER message containing a facility IE that includes an invoke of the DeactivateSS operation with parame... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.6.3 Test purpose | 1) To check that the UE correctly requests a supplementary service transaction for deactivation of call forwarding in the CM SERVICE REQUEST.
2) To check that the UE sends a REGISTER message containing the invoke of the DeactivateSS operation with the expected parameter values for deactivation of call forwarding.
3) To... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.6.4 Method of test | Initial Conditions
- System simulator:
- 1 cell, default parameters.
- User Equipment:
- the UE shall be in MM-state "Idle, updated";
Related ICS/IXIT Statements
Support of FDD Yes/No.
Support of CS speech Yes/No.
Description of the user's commands and of display of the answers from the network for call forwarding
Supp... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.6.5 Test requirements | In Step 2, the UE sends the CM SERVICE REQUEST message with the service type: "Supplementary service activation".
In Step 7, the UE sends the REGISTER message with correct parameters for deactivation of CFB.
In Step 10, the UE provides the appropriate user indication.
In Step 12, the UE sends the CM SERVICE REQUEST mes... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.7 Call forwarding supplementary services, Interrogation accepted | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.7.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.7.2 Conformance requirements | For interrogation of any specific call forwarding service (not applicable to a group of services) with any parameters, the UE shall transmit successively:
1) a CM SERVICE REQUEST with CM service type indicating "supplementary service activation";
2) and then the REGISTER message containing a facility IE that includes a... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.7.3 Test purpose | 1) To check that the UE correctly requests a supplementary service transaction for interrogation of call forwarding in the CM SERVICE REQUEST.
3) To check that the UE sends a REGISTER message containing the invoke of the InterrogateSS operation with the expected parameter values for interrogation of call forwarding.
4)... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.7.4 Method of test | Initial Conditions
- System simulator:
- 1 cell, default parameters.
- User Equipment:
- the UE shall be in MM-state "Idle, updated";
Related ICS/IXIT Statements
Support of FDD Yes/No.
Support of CS speech Yes/No.
Description of the user's commands and of display of the answers from the network for call forwarding
Supp... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.7.5 Test requirements | In Step 2, the UE sends the CM SERVICE REQUEST message with the service type: "Supplementary service activation".
In Step 7, the UE sends the REGISTER message with correct parameters for interrogation of CFB.
In Step 10, the UE provides the appropriate user indication.
In Step 12, the UE sends the CM SERVICE REQUEST me... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.8 Call forwarding supplementary services, Interrogation rejected | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.8.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.8.2 Conformance requirements | For interrogation of any specific call forwarding service (not applicable to a group of services) with any parameters, the UE shall transmit successively:
1) a CM SERVICE REQUEST with CM service type indicating "supplementary service activation";
2) and then the REGISTER message containing a facility IE that includes a... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.8.3 Test purpose | 1) To check that the UE correctly requests the establishment of a parallel MM transaction for supplementary service transaction of interrogation of a specific call forwarding service, sending a CM SERVICE REQUEST.
2) To check that the UE sends a REGISTER message containing the invoke of the InterrogateSS operation with... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.8.4 Method of test | Initial Conditions
- System simulator:
- 1 cell, default parameters.
- User Equipment:
- the UE shall be in CC state U10
Related ICS/IXIT Statements
Support of FDD Yes/No.
Support of CS speech Yes/No.
• Description of the user's commands and of display of the answers from the network for call forwarding
• Support of Ca... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.4.8.5 Test requirements | In Step 2, the UE sends the CM SERVICE REQUEST message with the service type: "Supplementary service activation".
In Step 4, the UE sends the REGISTER message with correct parameters for interrogation of CFB.
In Step 6, the UE provides the appropriate user indication.
In Step 8, the UE sends the STATUS message with the... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5 Call waiting | NOTE: In this subclause Subscriber B is the UE under test, and subscribers A, C and D are distant parties to the calls made during the tests. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.1 Call completion supplementary services, Waiting call indication and confirmation | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.1.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.1.2 Conformance requirement | When this service is activated for the controlling subscriber B and the B‑subscriber has calls only in states U10 (Active) or U26 (MO Modify) as defined in 3GPP TS 24.008, the arrival of an incoming call from subscriber C shall, if no other call is waiting be signalled to the mobile station B by a normal call indicatio... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.1.3 Test purpose | 1) To check that with an active call and when receiving a Mobile Terminated call, the UE shall include Cause #17 "user busy" in the CALL CONFIRMED message sent to the SS, and indicate the waiting call to the calling subscriber. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.1.4 Method of test | Initial conditions:
- System Simulator:
- one cell, default parameters
- User Equipment:
- the UE is "Circuit Switched Connect" for speech on cell A as per the Generic call set up procedure for mobile terminating circuit switched calls found in TS 34.108 clause 7.2.3.1 (call A-B).
Related ICS/IXIT statement(s)
Support ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.1.5 Test requirement | At step 2 the UE shall send CALL CONFIRMED message with cause #17 "user busy".
At step 4 the UE shall give a waiting call indication to the user. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.2 Call completion supplementary services, Waiting call accepted; existing call released | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.2.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.2.2 Conformance requirement | If the mobile user B before expiry of timer T2 determines to accept the waiting call and release the existing call the mobile station shall release the existing call firstly and accept the waiting call secondly.
For the release of the existing call the mobile station and the network shall act in accordance with 3GPP TS... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.2.3 Test purpose | 1) To check that with an active call and when the user accepts to receive a new Mobile Terminated call, the UE shall first release the existing call and then accept the waiting call. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.2.4 Method of test | Initial conditions:
- System Simulator:
- one cell, default parameters
- User Equipment:
- the UE is "Circuit Switched Connect" for speech on cell A as per the Generic call set up procedure for mobile terminating circuit switched calls found in TS 34.108 clause 7.2.3.1 (call A-B).
Related ICS/IXIT statement(s)
Support ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.2.5 Test requirement | At step 5 the UE shall send DISCONNECT message with the transaction identifier of call A-B.
At step 9 the UE shall send CONNECT message with the transaction identifier of call C-B.
At step 12 the UE shall send RELEASE COMPLETE message with cause #81 “invalid transaction identifier value” as the response to the STATUS E... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.3 Call completion supplementary services, Waiting call accepted; existing call on hold, no additional calls | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.3.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.3.2 Conformance requirement | If the mobile user B before expiry of timer T2 or if applicable timer T3 determines to accept the waiting call and put the existing call on hold the mobile station shall put the existing call on hold firstly and accept the waiting call secondly.
In case there is one active call (A‑B) and another call (D‑B) on hold and ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.3.3 Test purpose | 1) To check that with an active call and when the user accepts to receive a new Mobile Terminated call, the UE shall place the existing call on hold and then accept the waiting call. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.3.4 Method of test | Initial conditions:
- System Simulator:
- one cell, default parameters
- User Equipment:
- the UE is "Circuit Switched Connect" for speech on cell A as per the Generic call set up procedure for mobile terminating circuit switched calls found in TS 34.108 clause 7.2.3.1 (call A-B).
Related ICS/IXIT statement(s)
Support ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.3.5 Test requirement | At step 5 the UE shall send HOLD message with the transaction identifier of call A-B.
At step 8 the UE shall send CONNECT message with the transaction identifier of call C-B. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.4 Call completion supplementary services, Existing call released by user A; waiting call accepted | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.4.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.4.2 Conformance requirement | If user A before the expiry of timer T2 or if applicable timer T3 determines to release the existing call then the existing call shall be released by the network firstly and the waiting call may be accepted by the mobile station secondly.
For the release of the existing call the network and the mobile station shall act... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.4.3 Test purpose | 1) To check that, UE on receipt of the Disconnect message from the active call is able to complete the call clearance procedure and accept the waiting call. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.4.4 Method of test | Initial conditions:
- System Simulator:
- one cell, default parameters
- User Equipment:
- the UE is "Circuit Switched Connect" for speech on cell A as per the Generic call set up procedure for mobile terminating circuit switched calls found in TS 34.108 clause 7.2.3.1 (call A-B).
Related ICS/IXIT statement(s)
Support ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.4.5 Test requirement | At step 5 the UE shall send RELEASE message with the transaction identifier of call A-B.
At step 8 the UE shall send CONNECT message with the transaction identifier of call C-B.
At step 11 the UE shall send RELEASE COMPLETE message with cause #81 “invalid transaction identifier value” as the response to the STATUS ENQU... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.5 Call completion supplementary services, Waiting call released by subscriber B | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.5.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.5.2 Conformance requirement | For the release of the waiting call the mobile station and the network shall act in accordance with 3GPP TS 24.008. The transaction identifier shall be the transaction identifier (C‑B) of the waiting call.
* If the B subscriber indicates UDUB by the sending of the first clearing message with cause information element #... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.5.3 Test purpose | 1) To check that the UE, on sending of the Disconnect message for the waiting call, is able to complete the call clearance procedure and continue the ongoing call. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.5.4 Method of test | Initial conditions:
- System Simulator:
- one cell, default parameters
- User Equipment:
- the UE is "Circuit Switched Connect" for speech on cell A as per the Generic call set up procedure for mobile terminating circuit switched calls found in TS 34.108 clause 7.2.3.1 (call A-B).
Related ICS/IXIT statement(s)
Support ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.5.5 Test requirement | At step 5 the UE shall send DISCONNECT message with the transaction identifier of call C-B.
At step 9 the UE shall send RELEASE COMPLETE message with cause #81 “invalid transaction identifier value” as the response to the STATUS ENQUIRY message using TI of call C-B. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.6 Call completion supplementary services, Waiting call released by calling user C | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.6.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.6.2 Conformance requirement | If the calling user C, before the expiry of timer T2 or timer T3 (if applicable), releases the waiting call then the network shall release the waiting call against the mobile station.
For the release of the waiting call the network and the mobile station shall act in accordance with 3GPP TS 24.008. The transaction iden... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.6.3 Test purpose | 1) To check that when the calling user releases the waiting call, the UE is able to complete the call clearance procedure and continue the ongoing call. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.6.4 Method of test | Initial conditions:
- System Simulator:
- one cell, default parameters
- User Equipment:
- the UE is "Circuit Switched Connect" for speech on cell A as per the Generic call set up procedure for mobile terminating circuit switched calls found in TS 34.108 clause 7.2.3.1 (call A-B).
Related ICS/IXIT statement(s)
Support ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.6.5 Test requirement | At step 5 the UE shall send RELEASE message with the transaction identifier of call C-B.
At step 8 the UE shall send RELEASE COMPLETE message with cause #81 “invalid transaction identifier value” as the response to the STATUS ENQUIRY message using TI of call C-B. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.7 Call completion supplementary services, Activation | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.7.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.7.2 Conformance requirement | Activation of the supplementary service call waiting will be performed by the subscriber. The network will send a return result indication of acceptance of the request (see figure 1.4).
If the network cannot accept an activation request, an error indication is returned to the served mobile subscriber. Error values are ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.7.3 Test purpose | To check the correct operation of the activation procedure and that the UE correctly displays the response from the network in the following cases:
1) Successful activation.
2) Error response (reject).
3) Activation reject (Invoke problem). |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.7.4 Method of test | Initial conditions:
- System Simulator:
- one cell, default parameters
- User Equipment:
- The UE is in the MM-state "idle updated".
Related ICS/IXIT statement(s)
Support of FDD Yes/No.
Support of CS speech Yes/No.
Support of Call Waiting Yes/No.
Description of the user's commands and display of the answers from the ne... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.7.5 Test requirement | At steps 6, 13, 20, 27, 34 and 41 the UE shall display the correct user indication. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.8 Call completion supplementary services, Deactivation | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.8.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.8.2 Conformance requirement | Deactivation of the supplementary service call waiting will be performed by the subscriber. The network will send a return result indication of acceptance of the request (see figure 1.5).
If the network cannot accept a deactivation request, an error indication is returned to the served mobile subscriber. Error values a... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.8.3 Test purpose | To check the correct operation of the deactivation procedure and that the UE correctly displays the response from the network in the following cases:
1) Successful deactivation.
2) Error response (reject).
3) Deactivation reject (Invoke problem). |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.8.4 Method of test | Initial conditions:
- System Simulator:
- one cell, default parameters
- User Equipment:
- The UE is in the MM-state "idle updated".
Related ICS/IXIT statement(s)
Support of FDD Yes/No.
Support of CS speech Yes/No.
Support of Call Waiting Yes/No.
Description of the user's commands and display of the answers from the ne... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.5.8.5 Test requirement | At steps 6, 13, 20, 27, 34 and 41 the UE shall display the correct user indication. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.6 Call Hold supplementary services | General
In this subclause, subscriber A is the UE under test, and subscribers B and C are distant parties in the calls used in the test cases. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.6.1 Call completion supplementary services, Hold invocation | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.6.1.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.6.1.2 Conformance requirement | 1) The served mobile subscriber indicates to the network that communication on the interface is to be interrupted.
The hold function should be invoked in association with an existing active call.
The invocation of the hold function does not affect the existing 3GPP TS 24.008 call states, but does affect the auxiliary s... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.6.1.3 Test purpose | 1) To verify the ability of a UE to invoke the Call Hold service when it has an active call.
2) To verify the ability of a UE to apply the auxiliary states for hold and retrieve correctly during an unsuccessful invocation of the Call Hold service when the response from the SS is a HOLD REJECT message.
3) To verify the ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.6.1.4 Method of test | Initial Conditions
- System simulator:
- 1 cell, default parameters.
- User Equipment:
- The UE shall have Call A-B in state U10 "Active". The call shall be of telecommunication service TS11. This state is achieved by the procedure in section 7.2.3.2 of TS 34.108.
Related ICS/IXIT Statements
Support of FDD Yes/No.
Supp... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.6.1.5 Test requirements | 1) At step 2 and step 10 the UE shall send a HOLD message with the transaction identifier of Call A-B.
2) At step 4 and the UE shall send a STATUS message with the call state set to "U10 - active", the hold auxiliary state set to "Hold request" and the multi party auxiliary state set to "Idle". At step 7 the UE shall s... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.6.2 Call completion supplementary services, Retrieve procedure | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.6.2.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.6.2.2 Conformance requirement | 1) When the mobile subscriber that invoked the call hold service indicates that the call is to be retrieved, the network shall re establish communication and send an acknowledgement to the served mobile subscriber (see figure 2.3).
If the network received a non zero SS Screening indicator from the remote party's mobile... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.6.2.3 Test purpose | 1) To verify the ability of a UE to retrieve a held call.
2) To verify the ability of a UE to apply the auxiliary states for hold and retrieve correctly during an unsuccessful retrieve procedure for a held call when the response from the SS is a RETRIEVE REJECT message.
3) To verify the ability of a UE to apply the aux... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.6.2.4 Method of test | Initial Conditions
- System simulator:
- 1 cell, default parameters.
- User Equipment:
- The UE shall have Call A-B in state U10 "Active" with auxiliary state "Call held". The call shall be of telecommunication service TS11. This state is achieved by the procedure in section 7.2.3.3.1.2 of TS 34.108.
Related ICS/IXIT S... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.6.2.5 Test requirements | 1) At step 2 and step 9 the UE shall send a RETRIEVE message with the transaction identifier of Call A-B.
2) At step 4 the UE shall send a STATUS message with the call state set to "U10 - active", the hold auxiliary state set to "Retrieve request" and the multi party auxiliary state set to "Idle". At step 7 the UE shal... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.6.3 Call completion supplementary services, Alternate from one call to the other | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.6.3.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 15.6.3.2 Conformance requirement | 1) If the served mobile subscriber is connected to an active call and a call on hold, he can alternate from one call to the other. This results in the previously active call being held and the previously held call becoming retrieved. This is achieved by sending a HOLD message for the active call, followed by a RETRIEVE... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.