hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.1.3 RRM specific | |
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.2 Band combination specific part | |
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.2.1 LTE Advanced Carrier Aggregation of Band 1 and Band 46 (2DL/1 UL) | |
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.2.1.1 List of specific combination issues | |
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.2.1.1.1 Channel bandwidths per operating band for CA | Table 8.2.1.1.1-1: Inter-band CA
E-UTRA CA Band
E-UTRA Band
Uplink (UL) operating band
Downlink (DL) operating band
Duplex Mode
BS receive / UE transmit
BS transmit / UE receive
FUL_low– FUL_high
FDL_low – FDL_high
CA_1-46
1
1920 MHz
–
1980 MHz
2110 MHz
–
2170 MHz
FDD
46
N/A
5150 MHz
–
5925 MHz
TDD
Table 8.2.1.1.1-2: S... |
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.2.2 LTE Advanced Carrier Aggregation of Band 2 and Band 46 (2DL/1 UL) | Table 8.2.2-1: Inter-band CA operating bands
E-UTRA CA Band
E-UTRA Band
Uplink (UL) band
Downlink (DL) band
Duplex
mode
BS receive / UE transmit
Channel BW (MHz)
BS transmit / UE receive
Channel BW (MHz)
FUL_low – FUL_high
FDL_low – FDL_high
CA_2-46
2
1850 MHz
–
1910 MHz
5, 10, 15, 20
(Note 1)
1930 MHz
–
1990 MHz
5, 1... |
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.2.2.1 List of specific combination issues | |
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.2.2.1.1 Channel bandwidths per operating band for CA | Table 8.2.2.1.1-1: Supported E-UTRA bandwidths per CA configuration for inter-band CA
CA operating / channel bandwidth
Maximum aggregated bandwidth [MHz]
Bandwidth Combination Set
E-UTRA CA Configuration
E-UTRA Bands
1.4 MHz
3 MHz
5 MHz
10 MHz
15 MHz
20 MHz
CA_2A-46A
2
Yes
Yes
Yes
Yes
40
0
46
Yes
NOTE: For the UE that... |
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.2.2.1.2 Co-existence studies for CA_2-46 (1UL/2DL) | Table 8.2.2.1.2-1 gives the UL to DL harmonic products for CA band 2 + band 46 with 1UL. It can be seen that 2nd harmonics fall into band 43 and that 3rd harmonics falls into the band 46.
Table 8.2.2.1.2-1: Band 2 and Band 46 1UL harmonic products
UE UL carriers
f1_low
f1_high
f2_low
f2_high
UL frequency (MHz)
1850
191... |
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.2.3 LTE Advanced Carrier Aggregation of Band 3 and Band 46 (2DL/1 UL) | |
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.2.3.1 List of specific combination issues | |
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.2.3.1.1 Channel bandwidths per operating band for CA | Table 8.2.3.1.1-1: Inter-band CA
E-UTRA CA Band
E-UTRA Band
Uplink (UL) operating band
Downlink (DL) operating band
Duplex Mode
BS receive / UE transmit
BS transmit / UE receive
FUL_low –FUL_high
FDL_low–FDL_high
CA_3-46
3
1710 MHz
–
1785 MHz
1805 MHz
–
1880 MHz
FDD
46
N/A
5150 MHz
–
5925 MHz
TDD
Table 8.2.3.1.1-2: Su... |
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.2.3.1.2 Co-existence studies for CA_3-46 | The harmonic frequencies are observed in table 8.2.3.1.2-1. Therefore it is concluded that there is an issue on 3rd harmonic interference from Band 3 UL to Band 46 DL. It was agreed not to apply HTF for this CA combination. How to treat MSD requirements is FFS.
Table 8.2.3.1.2-1: Impact of UL/DL Harmonic Interference
2... |
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.2.4 LTE Advanced Carrier Aggregation of Band 4 and Band 46 (2DL/1 UL) | Table 8.2.4-1: Inter-band CA operating bands
E-UTRA CA Band
E-UTRA Band
Uplink (UL) band
Downlink (DL) band
Duplex
mode
BS receive / UE transmit
Channel BW (MHz)
BS transmit / UE receive
Channel BW (MHz)
FUL_low – FUL_high
FDL_low– FDL_high
CA_4-46
4
1710 MHz
–
1785 MHz
5, 10, 15, 20
(note 1)
2110 MHz
–
2155 MHz
5, 10,... |
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.2.4.1 List of specific combination issues | |
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.2.4.1.1 Channel bandwidths per operating band for CA | Table 8.2.4.1.1-1: Supported E-UTRA bandwidths per CA configuration for inter-band CA
CA operating / channel bandwidth
Maximum aggregated bandwidth [MHz]
Bandwidth Combination Set
E-UTRA CA Configuration
E-UTRA Bands
1.4 MHz
3 MHz
5 MHz
10 MHz
15 MHz
20 MHz
CA_4A-46A
4
Yes
Yes
Yes
Yes
40
0
46
Yes
NOTE: For the UE that... |
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.2.4.1.2 Co-existence studies for CA_4-46 (1UL/2DL) | Table 8.2.4.1.2-1 gives the UL to DL harmonic products for CA band 4 + band 46 with 1UL. It can be seen that 2nd harmonics fall into band 22 and 42, and that 3rd harmonics falls into band 46.
Table 8.2.4.1.2-1: Band 4 and Band 46 1UL harmonic products
UE UL carriers
f1_low
f1_high
f2_low
f2_high
UL frequency (MHz)
1710... |
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.2.5 LTE Advanced Carrier Aggregation of Band 7 and Band 46 (2DL/1 UL) | Table 8.2.5-1: Inter-band CA operating bands
E-UTRA CA Band
E-UTRA Band
Uplink (UL) band
Downlink (DL) band
Duplex
mode
BS receive / UE transmit
Channel BW (MHz)
BS transmit / UE receive
Channel BW (MHz)
FUL_low– FUL_high
FDL_low– FDL_high
CA_7-46
7
2500 MHz
–
2570 MHz
5, 10, 15, 20
(note 1)
2600 MHz
–
2690 MHz
5, 10, ... |
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.2.5.1 List of specific combination issues | |
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.2.5.1.1 Channel bandwidths per operating band for CA | Table 8.2.5.1.1-1: Supported E-UTRA bandwidths per CA configuration for inter-band CA
CA operating / channel bandwidth
Maximum aggregated bandwidth [MHz]
Bandwidth Combination Set
E-UTRA CA Configuration
E-UTRA Bands
1.4 MHz
3 MHz
5 MHz
10 MHz
15 MHz
20 MHz
CA_7A-46A
7
Yes
Yes
Yes
Yes
40
0
46
Yes
NOTE: For the UE that... |
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.2.5.1.2 Co-existence studies for CA_7-46 (1UL/2DL) | Table 8.2.5.1.2-1 gives the UL to DL harmonic products for CA band 7 + band 46 with 1UL. It can be seen that the 2nd or 3rd harmonics don’t fall into any E-UTRA operating band.
Table 8.2.5.1.2-1: Band 7 and Band 46 1UL harmonic products
UE UL carriers
f1_low
f1_high
f2_low
f2_high
UL frequency (MHz)
2500
2570
5150
5925... |
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.2.6 LTE Advanced Carrier Aggregation of Band 41 and Band 46 (2DL/1 UL) | Table 8.2.6-1: Inter-band CA operating bands
E-UTRA CA Band
E-UTRA Band
Uplink (UL) band
Downlink (DL) band
Duplex
mode
BS receive / UE transmit
Channel BW (MHz)
BS transmit / UE receive
Channel BW (MHz)
FUL_low – FUL_high
FDL_low – FDL_high
CA_41-46
41
2496 MHz
–
2690 MHz
5, 10, 15, 20
(note 1)
2496 MHz
–
2690 M... |
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.2.6.1 List of specific combination issues | |
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.2.6.1.1 Channel bandwidths per operating band for CA | Table 8.2.6.1.1-1: Supported E-UTRA bandwidths per CA configuration for inter-band CA
CA operating / channel bandwidth
Maximum aggregated bandwidth [MHz]
Bandwidth Combination Set
E-UTRA CA Configuration
E-UTRA Bands
1.4 MHz
3 MHz
5 MHz
10 MHz
15 MHz
20 MHz
CA_41A-46A
41
Yes
Yes
Yes
Yes
40
0
46
Yes
NOTE: For the UE th... |
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.2.6.1.2 Co-existence studies for CA_41-46 (1UL/2DL) | Table 8.2.6.1.2-1 gives the UL to DL harmonic products for CA band 41 + band 46 with 1UL. It can be seen that 2nd harmonics fall into band 46.
Table 8.2.6.1.2-1: Band 41 and Band 46 1UL harmonic products
UE UL carriers
f1_low
f1_high
f2_low
f2_high
UL frequency (MHz)
2496
2690
5150
5925
2nd order harmonics frequency ra... |
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.2.7 LTE Advanced Carrier Aggregation of Band 42 and Band 46 (2DL/1 UL) | Table 8.2.7-1: Inter-band CA operating bands
E-UTRA CA Band
E-UTRA Band
Uplink (UL) band
Downlink (DL) band
Duplex
mode
BS receive / UE transmit
Channel BW (MHz)
BS transmit / UE receive
Channel BW (MHz)
FUL_low – FUL_high
FDL_low – FDL_high
CA_42-46
42
3200 MHz
–
3400 MHz
5, 10, 15, 20
(note 1)
3200 MHz
–
3400 M... |
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.2.7.1 List of specific combination issues | |
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.2.7.1.1 Channel bandwidths per operating band for CA | Table 8.2.7.1.1-1: Supported E-UTRA bandwidths per CA configuration for inter-band CA
CA operating / channel bandwidth
Maximum aggregated bandwidth [MHz]
Bandwidth Combination Set
E-UTRA CA Configuration
E-UTRA Bands
1.4 MHz
3 MHz
5 MHz
10 MHz
15 MHz
20 MHz
CA_42A-46A
42
Yes
Yes
Yes
Yes
40
0
46
Yes
NOTE: For the UE th... |
23719327f0d911a79ea7d5ff24859ccc | 36.852-13 | 8.2.7.1.2 Co-existence studies for CA_42-46 (1UL/2DL) | <Text to be added>
8.2.7.1.3 ∆TIB and ∆RIB values
For two simultaneous DL and one UL in band 42, the TIB,c values are shown in table 8.2.7.1.3-1.
Table 8.2.7.1.3-1: ΔTIB,c
Inter-band CA Configuration
E-UTRA Band
ΔTIB,c [dB]
CA_42A-46A
42
[0.5]
TIB,c for band 46 is not needed, since no UL transmission are allowed in b... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 1 Scope | The present document describes the technical characteristics and methods of test for Mobile Stations (MS), for the Pan European digital cellular communications system and Personal Communication Systems (PCS) operating in the 400 MHz, 700 MHz, 810 MHz, 850 MHz, 900 MHz, 1 800 MHz and 1 900 MHz band (GSM 450, GSM 480, GS... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 2 References | The following documents contain provisions which, through reference in this text, constitute provisions of the present document.
• References are either specific (identified by date of publication and/or edition number or version number) or non‑specific.
• For a specific reference, subsequent revisions do not apply.
• ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 3 Definitions, conventions and applicability | For the purposes of the present document, the abbreviations and acronyms given in 3GPP TS 01.04 apply. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 3.1 Mobile station definition and configurations | In the present document, a MS can be:
- a vehicle mounted station;
- a portable station;
- a handheld station;
- a vehicle mounted/portable station;
- a vehicle mounted/handheld station.
A MS is the complete equipment configuration which may take part in a communication. However, this may not be the MS as it is offered... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 3.2 Applicability | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 3.2.1 Applicability of this specification | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 3.2.1.1 MS equipped with a connector | If a MS is equipped with a connector, to connect terminal equipment on an S or R reference point as defined in 3GPP TS 04.02, then testing of the MS may include testing of appropriate functioning to and from this connector.
The present document does not apply to TE which is to be connected to that connector, even if it... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 3.2.1.2 GPRS | Several important tests are missing in the present document for the following types of GPRS MS:
- Type 2 MS [3GPP TS 05.02].
- MS with 3 or more TX-slots (included in the test cases are multislot classes 1, 2, 3, 4, 5, 6, 8, 9, 10, 19 and 24) [3GPP TS 05.02].
- GPRS only MS.
- Mobiles that can operate in class A [3GPP ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 3.2.2 Applicability of the individual tests | This information has been moved to 3GPP TS 51.010-2, annex B. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 3.2.3 Applicability to terminal equipment | If a MS is delivered for conformance testing, and it contains physically integrated TE, then the present document applies to the complete MS including that TE.
The present document also applies to separate TE that is delivered for conformance testing with the MS. The MS is then tested as an MT0. In that case, the speci... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 3.3 Definitions | For the purposes of the present document, the following terms and definitions apply:
idle updated: MS is defined to be "idle updated" if the following three conditions are fulfilled:
- its update status is U1 UPDATED (see 3GPP TS 04.08 / 3GPP TS 24.008);
- it is in the MM state MM-IDLE (see 3GPP TS 04.08 / 3GPP TS 24.0... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 3.4 Conventions for mathematical notations | For the purpose of the present document mathematical terms used throughout the present document are given in this subclause. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 3.4.1 Mathematical signs | The "plus or minus" sign is expressed by "".
The sign "multiplied by" is expressed by "*".
The sign "divided by" is expressed by "/", or the common division bar.
The sign "greater than or equal to" is expressed by "".
The sign "less than or equal to" is expressed by "". |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 3.4.2 Powers to the base 10 | Powers to the base 10 are expressed by "10Ex", where x is the exponent, e.g. 10E‑5, 10E6. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 3.5 Conventions on electrical terms | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 3.5.1 Radio Frequency (RF) input signal level | In general, the RF input signal level to the MS is expressed in terms of the received field strength E in dBµV/m (assuming a 0 dBi gain antenna). This is related to the power level P in dBm by the following formula (see 3GPP TS 05.05):
GSM 450: E (dBµV/m) = P (dBm) + 130.5 (calculated for a frequency of 460 MHz).
GSM 4... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 3.5.2 Reference sensitivity level | In the present document the term:
Reference Sensitivity level ( )
is used to indicate that the SS establishes reference sensitivity level taking account of any loses associated with the RF connection to the MS. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 3.5.3 Power level of fading signal | The power level of a fading signal is defined as the total signal level averaged over time. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 3.6 Terms on test conditions | Unless otherwise stated, all Test Cases in this document apply to all the frequency bands mentioned in this section.
The MNC values used in this document have either 2 digits or 3 digits according to Frequency Band – see Table 3.1
Table 3.1: MNC values
Band
MNC value
GSM 450, GSM 480, GSM 900, DCS 1 800
2 digits
Otherw... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 3.6.1 Radio test conditions | The radio propagation conditions refer to multipath propagation models of 3GPP TS 05.05.
They are expressed by typical profiles:
- static;
- rural area (RA);
- hilly terrain (HT);
- urban area (TU); or for
- equalization test (EQ).
The non-static profiles are also related to typical speeds of movement of the MS expr... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 4 Test Equipment | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 4.1 Terms used to describe test equipment in the present document | In order to perform MS conformity testing, the use of test equipment is necessary to provide the MS with stimulus signals and to analyse and record the resulting responses.
Throughout the present document the term "System Simulator" is used to describe the suite of test equipment required to interact with the following... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 4.2 Functional requirements of test equipment | The present document does not include a functional description of the test equipment required to perform the tests. These requirements should be deduced from the test descriptions and the information in annex 5.
Annex 5 describes the requirements for the test equipment which cannot be derived from, and which are assume... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 5 Testing methodology in general (layers 1, 2, and 3) | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 5.1 Testing of optional functions and procedures | Any function or procedure which is optional, as indicated in the present document , may be subject to a conformance test if it is implemented in the MS.
A declaration by the apparatus supplier (PICS/PIXIT) is used to determine whether an optional function/procedure has been implemented. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 5.2 Test interfaces and facilities | The air interface (Um reference point) provides the main test interface for the purpose of performing conformance tests.
The SS layer 2 and layer 3 shall react with the MS on the air interface in accordance with the BSS requirements in the 3GPP TS 04.xx and 05.xx series recommendations, except where the description def... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 5.3 Different protocol layers | The conformance tests for each layer of the Dm-channel protocol are specified separately and the test configuration(s) to be used in testing each layer is specified in the subclause of the present document relating to the conformance tests for that layer. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 5.4 Information to be provided by the apparatus supplier | The apparatus supplier shall provide two kinds of information:
- information with respect to the protocol: Protocol Implementation Conformance Statement (PICS);
- information with respect to the man machine interface: Protocol Implementation Extra Information required for Testing (PIXIT).
The complete list of the infor... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 5.5 Definitions of transmit and receive times | The time a burst is received or transmitted is defined to be in the middle of the burst, i.e. transition from Bit Number BN74 to BN75 for all bursts except random access bursts, the middle of which is the transition from BN48 to BN49.
The reception/transmission time of speech or data blocks or a signalling frame (layer... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 6 Reference test methods | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 6.1 General | Annex 1 gives reference test conditions to be used throughout the present document, unless otherwise specified. It consists of a part on general conditions, and a part on normal and extreme test conditions.
Unless otherwise specified, tests are run using the normal test conditions.
If a test is to be run using the extr... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 6.2 Choice of frequencies in the frequency hopping mode | For the tests using frequency hopping, 38 frequencies are used over:
GSM 850: a 21 MHz band;
P-GSM 900: a 21 MHz band;
E-GSM 900: a [21] MHz band;
R-GSM 900: a 23 MHz band;
ER-GSM 900: a 23 MHz band;
DCS 1 800: a 75 MHz band;
PCS 1 900: a 60 MHz band.
For the tests using frequency hopping, 14 frequencies are used over:... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 6.4 Standard test signals | The standard test signals C0, C1, I0, I1 and I2 as used in the present document, are defined in annex 5. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 6.5 Power (control) levels | In the present document, except where explicitly stated otherwise, if the MS is commanded to its minimum power (control) level, the SS is allowed to signal power control level 15 for DCS 1 800 and PCS 1 900 and 19 for all other bands. Furthermore, except where explicitly stated otherwise, if the MS is commanded to its ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 7 Implicit testing | For some GSM features conformance is not verified explicitly in the present document. This does not imply that correct functioning of these features is not essential, but that these are implicitly tested to a sufficient degree in other tests. Examples for implicitly tested features are frequency hopping and encryption.... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 8 Measurement uncertainty | The measured value relating to the corresponding limit shall be used to determine whether or not a terminal equipment meets the requirement. (ETR 028 annex B).
This process is often referred to as "shared risk". |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 9 Format of tests | For lower layer tests the following basic format for tests is used:
*.*..* Title
*.*..*.1 Definition
This subclause provides, if necessary, a definition of the feature/function being tested and the applicability of the test to different MS (e.g. speech only, data only etc.). The applicability information in this clause... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10 Generic call set up procedures | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.1 Generic call set-up procedure for mobile terminating speech calls | In the test procedures described in the present document, unless otherwise stated in the test description, the Mobile Terminating Speech call set-up procedure shall be as described in this subclause.
NOTE: In test cases where a fading profile is required, a different and appropriate ARFCN may be selected, for instance ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.1.1 Initial conditions | System Simulator:
1 cell, default parameters.
Mobile Station:
- the MS shall be operated under normal test conditions (see annex 1 TC.2.1);
- the special Test-SIM (see annex 4) shall be inserted;
- the MS is "idle, updated", with a TMSI assigned and listening to the BCCH/CCCH of the active cell. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.1.2 Definition of system information messages | The following parameters shall be coded into the system information messages. Parameters shall be coded according to 3GPP TS 04.08 / 3GPP TS 44.018.
The RACH Control Parameters IE shall be the same in SYSTEM INFORMATION TYPE 1, TYPE 2, TYPE 3 and TYPE 4 messages.
The Location Area Identification IE, Cell Selection Para... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.1.3 Procedure | An MS terminating call on a TCH/FS shall be established under ideal radio conditions and with Timing advance set to 0, as follows:
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
Sent on the correct paging subchannel
2
MS -> SS
CHANNEL REQUEST
Establishment cause indicates "answer to paging"
3
SS -> MS... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.1.4 Specific message contents | PAGING REQUEST TYPE 1 (3GPP TS 04.08 / 3GPP TS 44.018, subclause 9.1.22) to the MS
Information Element
Value/remark
Protocol Discriminator
RR
Skip Indicator
0000
Message Type
Page Mode
Normal Paging
Channel Needed
spare, any channel
Mobile Identity 1
Odd/even no of digits
As applicable for TMSI
Type of Identity
TMSI
Id... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.2 Generic call set-up procedure for mobile originating speech calls | In the test procedures described in the present document, unless otherwise stated in the test description, the Mobile Originating Speech (MOC) call set-up procedure shall be as described in this subclause.
NOTE: In test cases where a fading profile is required, a different and appropriate ARFCN may be selected, for ins... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.2.1 Initial conditions | System Simulator:
1 cell, default parameters.
Mobile Station:
- the MS shall be operated under normal test conditions (see annex 1 TC.2.1);
- the special Test-SIM (see annex 4) shall be inserted;
- the MS is "idle, updated", with a TMSI assigned and listening to the BCCH/CCCH of the active cell. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.2.2 Definition of system information messages | See subclause 10.1.2. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.2.3 Procedure | An MS originating call on a TCH/FS shall be established under ideal radio conditions and with Timing advance set to 0, as follows:
Step
Direction
Message
Comments
1
MS
"called number" entered
2
MS -> SS
CHANNEL REQUEST
Establishment cause indicates "originating call, NECI <> 1"
3
SS -> MS
IMMEDIATE ASSIGNMENT
4
MS -> S... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.2.4 Specific message contents | IMMEDIATE ASSIGNMENT (3GPP TS 04.08 / 3GPP TS 44.018, subclause 9.1.18) to the MS
Information Element
Value/remark
Protocol Discriminator
RR
Skip Indicator
0000
Message Type
Page Mode
Normal
Channel Description
Channel Type
SDCCH/SACCH 1(4)
Time slot number
zero
Training seq. code
same as BCCH
Hopping
No
ARFCN
ARFCN of... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.3 Generic call set-up procedure for mobile terminating data calls | In the test procedures described in the present document, unless otherwise stated in the test description, the Mobile Terminating Data call set-up procedure shall be as described in this subclause.
NOTE: In test cases where a fading profile is required, a different and appropriate ARFCN may be selected, for instance if... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.3.1 Initial conditions | System Simulator:
1 cell, default parameters.
Mobile Station:
- the MS shall be operated under normal test conditions (see annex 1 TC.2.1).
- the special Test-SIM (see annex 4) shall be inserted;
- the MS is "idle, updated", with a TMSI assigned and listening to the BCCH/CCCH of the active cell. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.3.2 Definition of system information messages | See subclause 10.1.2. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.3.3 Procedure | An MS terminating call on a TCH shall be established under ideal radio conditions and with Timing advance set to 0, as follows:
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
Sent on the correct paging subchannel
2
MS -> SS
CHANNEL REQUEST
Establishment cause indicates "answer to paging"
3
SS -> MS
IM... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.3.4 Specific message contents | PAGING REQUEST TYPE 1 (3GPP TS 04.08 / 3GPP TS 44.018, subclause 9.1.22) to the MS
Information Element
Value/remark
Protocol Discriminator
RR
Skip Indicator
0000
Message Type
Page Mode
Normal Paging
Channel Needed
spare, any channel
Mobile Identity 1
Odd/even no of digits
As applicable for TMSI
Type of Identity
TMSI
Id... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.4 Generic call set-up procedure for mobile originating data calls | In the test procedures described in the present document, unless otherwise stated in the test description, the Mobile Originating Data call set-up procedure shall be as described in this subclause.
NOTE: In test cases where a fading profile is required, a different and appropriate ARFCN may be selected, for instance if... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.4.1 Initial conditions | System Simulator:
1 cell, default parameters.
Mobile Station:
- the MS shall be operated under normal test conditions (see annex 1 TC.2.1);
- the special Test-SIM (see annex 4) shall be inserted;
- the MS is "idle, updated", with a TMSI assigned and listening to the BCCH/CCCH of the active cell. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.4.2 Definition of system information messages | See subclause 10.1.2. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.4.3 Procedure | An MS originating call on a TCH shall be established under ideal radio conditions and with Timing advance set to 0, as follows:
Step
Direction
Message
Comments
1
MS
"called number" entered
2
MS -> SS
CHANNEL REQUEST
Establishment cause indicates "originating call, NECI <> 1"
3
SS -> MS
IMMEDIATE ASSIGNMENT
4
MS -> SS
C... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.4.4 Specific message contents | IMMEDIATE ASSIGNMENT (3GPP TS 04.08 / 3GPP TS 44.018, subclause 9.1.18) to the MS
Information Element
Value/remark
Protocol Discriminator
RR
Skip Indicator
0000
Message Type
Page Mode
Normal
Channel Description
Channel Type
SDCCH/SACCH 1(4)
Time slot number
zero
Training seq. code
same as BCCH
Hopping
No
ARFCN
ARFCN of... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.5 Generic call set-up procedure for mobile terminating multislot configuration, minimum number of timeslots allocated | In the test procedures described in the present document, unless otherwise stated in the test description, the Mobile Terminating multislot connection set-up procedure shall be as described in this subclause.
NOTE: In test cases where a fading profile is required, a different and appropriate ARFCN may be selected, for ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.5.1 Initial conditions | System Simulator:
1 cell, default parameters.
Mobile Station:
- the MS shall be operated under normal test conditions (see annex 1 TC.2.1);
- the special Test-SIM (see annex 4) shall be inserted;
- the MS is "idle, updated", with a TMSI assigned and listening to the BCCH/CCCH of the active cell. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.5.2 Definition of system information messages | See subclause 10.1.2. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.5.3 Procedure | An MS terminating multislot connection shall be established under ideal radio conditions and with Timing advance set to 0, as follows:
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
Sent on the correct paging subchannel
2
MS -> SS
CHANNEL REQUEST
Establishment cause indicates "answer to paging"
3
SS -... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.5.4 Specific message contents | PAGING REQUEST TYPE 1 (3GPP TS 04.08 / 3GPP TS 44.018, subclause 9.1.22) to the MS
Information Element
Value/remark
Protocol Discriminator
RR
Skip Indicator
0000
Message Type
Page Mode
Normal Paging
Channel Needed
spare, any channel
Mobile Identity 1
Odd/even no of digits
As applicable for TMSI
Type of Identity
TMSI
Id... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.6 Generic call set-up procedure for mobile originating multislot configuration, minimum number of timeslots allocated | In the test procedures described in the present document, unless otherwise stated in the test description, the Mobile Originating multislot connection set-up procedure shall be as described in this subclause.
NOTE: In test cases where a fading profile is required, a different and appropriate ARFCN may be selected, for ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.6.1 Initial conditions | System Simulator:
1 cell, default parameters.
Mobile Station:
- the MS shall be operated under normal test conditions (see annex 1 TC.2.1);
- the special Test-SIM (see annex 4) shall be inserted;
- the MS is "idle, updated", with a TMSI assigned and listening to the BCCH/CCCH of the active cell. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.6.2 Definition of system information messages | See subclause 10.1.2. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.6.3 Procedure | An MS originating multislot connection shall be established under ideal radio conditions and with Timing advance set to 0, as follows:
Step
Direction
Message
Comments
1
MS
"called number" entered
2
MS -> SS
CHANNEL REQUEST
Establishment cause indicates "originating call, NECI <> 1"
3
SS -> MS
IMMEDIATE ASSIGNMENT
4
MS ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.6.4 Specific message contents | IMMEDIATE ASSIGNMENT (3GPP TS 04.08 / 3GPP TS 44.018, subclause 9.1.18) to the MS
Information Element
Value/remark
Protocol Discriminator
RR
Skip Indicator
0000
Message Type
Page Mode
Normal
Channel Description
Channel Type
SDCCH / SACCH 1(4)
Time slot number
zero
Training seq. code
same as BCCH
Hopping
No
ARFCN
ARFCN ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.7 Generic procedure for GPRS downlink data transfer | In the test procedures described in the present document, unless otherwise stated in the test description, the Mobile Terminating Data transfer procedure shall be as described in this subclause.
NOTE: In test cases where a fading profile is required, a different and appropriate ARFCN may be selected, for instance if th... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.7.1 Initial conditions | System Simulator:
- 1 cell, default parameters as specified in clause 40;
- ideal radio conditions and Timing advance set to 0.
Mobile Station:
- the MS shall be operated under normal test conditions (see annex 1 TC.2.1);
- the special Test-SIM (see annex 4) shall be inserted;
- the MS is GPRS attached with a P-TMSI al... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 10.7.2 Definition of system information messages | See clause 40. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.