hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.1.4.1 Speech followed by Asynchronous Data | See subclauses 11.8.1.3.1 and 11.8.1.3.2. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.1.4.2 Speech followed by Synchronous Data | See subclause 11.8.1.3.3. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.1.5 TS 61 - Alternate Speech / Facsimile group 3 | The first BC in the Setup message is coded "Speech": 04 01 A0.
The repeat Indicator in the Setup message is coded "Circular for successive selection (alternate)": D1.
The second BC in the Setup message is coded as described below. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.1.5.1 TS 61 - Alternate Speech / Facsimile group 3, Transparent | BC GSM = 04 07 X3 X8 81 20 1X X3 80
Octet 1
0
0
0
0
0
1
0
0
Information Element: Bearer Capability
Octet 2
0
0
0
0
0
1
1
1
Length
Octet 3
1
Extension
y
y
Radio Channel Requirement : Spare
0
Coding Standard: GSM
0
Transfer Mode: Circuit
0
1
1
Info. Transfer Cap.: FAX3
Octet 4
1
Extension
y
Spare
1
1
Structure: Unstruct... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.1.5.2 TS 61 - Alternate Speech / Facsimile group 3, Non-Transparent | BC GSM = 04 07 X3 XX 81 20 1X 63 X0
Octet 1
0
0
0
0
0
1
0
0
Information Element: Bearer Capability
Octet 2
0
0
0
0
0
1
1
1
Length
Octet 3
1
Extension
y
y
Radio Channel Requirement : Spare
0
Coding Standard: GSM
0
Transfer Mode: Circuit
0
1
1
Info. Transfer Cap.: FAX3
Octet 4
1
Extension
y
Spare
0
0
Structure: SDU integ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.1.6 TS 62 - Automatic Facsimile group 3 | The repeat Indicator in the Setup message is not available.
The BC GSM is coded as described in subclause 11.8.1.5. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2 MS to SS direction | In the whole subclause 11.8.2, "1)" and "2)" stand for:
1) Not applicable in a CALL CONFIRMED message.
2) Not applicable in a CALL CONFIRMED message responding to a SETUP message with no BC-IE (PSTN-originated call with single numbering scheme).
If the MS supports only Full Rate:
Radio Channel Requirement in Octet 3:
-... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.1 BS 21 to 26 - Asynchronous Service | If the MS supports only SAP I.440/I.450:
SAP in Octet 5:
-
-
-
-
-
0
0
1
I.440/I.450
If the MS supports only SAP X.28 non dedicated PAD:
SAP in Octet 5:
-
-
-
-
-
1
0
1
X.28 nond
Else:
SAP in Octet 5:
-
-
-
-
-
x
0
1
I.440/I.450 or X.28 nond
The use of the alternative configuration "Autobauding modem type 1" in BS 22 t... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.1.1 BS 21 | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.1.1.1 3,1 kHz Audio, Transparent | BC GSM = 04 0X X2 X8 8X 21 X1 XX X1 (CX)
Octet 1
0
0
0
0
0
1
0
0
Information Element: Bearer Capability
Octet 2
0
0
0
0
x
x
x
x
Length (7 or 8) depending on the presence of octet 7.
Octet 3
1
Extension
x
x
Radio Channel Requirement
0
Coding Standard: GSM
0
Transfer Mode: Circuit
0
1
0
Info. Transfer Cap.: 3,1 kHz Audio... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.1.1.2 3,1 kHz Audio, Non Transparent | BC GSM = 04 0X X2 XX 8X 21 X1 6X X1 (CX)
Octet 1
0
0
0
0
0
1
0
0
Information Element: Bearer Capability
Octet 2
0
0
0
0
x
x
x
x
Length (7 or 8) depending on presence of octet 7.
Octet 3
1
Extension
x
x
Radio Channel Requirement
0
Coding Standard: GSM
0
Transfer Mode: Circuit
0
1
0
Info. Transfer Cap.: 3,1 kHz Audio
Oct... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.1.1.3 2) UDI, Transparent | BC GSM = 04 0X X1 X8 8X 21 X1 XX X0
Octet 1
0
0
0
0
0
1
0
0
Information Element: Bearer Capability
Octet 2
0
0
0
0
x
x
x
x
Length (7 or 8) depending on the presence of octet 7
Octet 3
1
Extension
x
x
Radio Channel Requirement
0
Coding Standard: GSM
0
Transfer Mode: Circuit
0
0
1
Info. Transfer Cap.: UDI
Octet 4
1
Exten... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.1.1.4 2) UDI, Non Transparent | BC GSM = 04 0X X1 XX 8X 21 X1 6X X0 (CX)
Octet 1
0
0
0
0
0
1
0
0
Information Element: Bearer Capability
Octet 2
0
0
0
0
x
x
x
x
Length (7 or 8) depending on presence of octet 7.
Octet 3
1
Extension
x
x
Radio Channel Requirement
0
Coding Standard: GSM
0
Transfer Mode: Circuit
0
0
1
Info. Transfer Cap.: UDI
Octet 4
1
Ext... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.1.2 BS 22 | Same as BS 21 except:
User Rate in Octet 6a:
-
-
-
-
0
0
1
0
1,2 kbit/s
If different from "none",
Modem Type Octet 6c:
-
-
-
0
0
0
1
0
Modem V.22
In case of 3,1 kHz Audio non transparent service, depending of the type of flow control supported by the TE, octet 7 is present or not. If not present, it means "outband flow... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.1.3 BS 24 | Same as BS 21 except:
User Rate in Octet 6a:
-
-
-
-
0
0
1
1
2,4 kbit/s
If different from "none",
Modem Type Octet 6c:
-
-
-
0
0
0
1
1
Modem V.22bis
1
0
1
Modem V.26ter
In case of 3,1kHz Audio non transparent service, depending of the type of flow control supported by the TE, octet 7 is present or not. If not present, ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.1.4 BS 25 | Same as BS 21 except:
User Rate in Octet 6a:
-
-
-
-
0
1
0
0
4,8 kbit/s
If different from "none",
Modem Type Octet 6c:
-
-
-
0
0
1
1
0
Modem V.32
In case of 3,1 kHz Audio non transparent service, depending of the type of flow control supported by the TE, octet 7 is present or not. If not present, it means "outband flow... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.1.5 BS 26 | Same as BS 21 except:
NIRR in Octet 4:
-
-
-
-
-
-
0
-
no meaning
User Rate in Octet 6a:
-
-
-
-
0
1
0
1
9,6 kbit/s
Interm. Rate in Octet 6b:
-
1
1
-
-
-
-
-
16 kbit/s
If different from "none",
Modem Type Octet 6c:
-
-
-
0
0
1
1
0
Modem V.32
In case of 3,1kHz Audio non transparent service, depending of the type of flow... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.1.6 BS 23 | Same as BS 21 except:
User Rate in Octet 6a:
-
-
-
-
0
1
1
1
1,2 kbit/s/75 bit/s
If different from "none",
Modem Type Octet 6c:
-
-
-
0
0
1
0
0
Modem V.23
In case of 3,1kHz Audio non transparent service, depending of the type of flow control supported by the TE, octet 7 is present or not. If not present, it means "outb... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.2 BS 31 to 34 - Synchronous Service | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.2.1 BS 32 | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.2.1.1 3,1 kHz Audio, Transparent, non-X.32 case | BC GSM = 04 07 X2 X8 81 20 13 43 83
Octet 1
0
0
0
0
0
1
0
0
Information Element: Bearer Capability
Octet 2
0
0
0
0
0
1
1
1
Length
Octet 3
1
Extension
x
x
Radio Channel Requirement : Spare
0
Coding Standard: GSM
0
Transfer Mode: Circuit
0
1
0
Info. Transfer Cap.: 3,1 kHz Audio
Octet 4
1
Extension
y
Spare
1
1
Structure: ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.2.1.2 2) UDI, Transparent mode, non-X.32 case | BC GSM = 04 07 X1 X8 8X 20 13 43 80
Octet 1
0
0
0
0
0
1
0
0
Information Element: Bearer Capability
Octet 2
0
0
0
0
0
1
1
1
Length
Octet 3
1
Extension
x
x
Radio Channel Requirement
0
Coding Standard: GSM
0
Transfer Mode: Circuit
0
0
1
Info. Transfer Cap.: UDI
Octet 4
1
Extension
y
Spare
1
1
Structure: Unstructured
1
Dup... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.2.1.3 3,1 kHz Audio, Transparent mode, X.32 case (Packet Service) | BC GSM = 04 0X X2 X8 86 20 13 X3 X3 (C6)
Octet 1
0
0
0
0
0
1
0
0
Information Element: Bearer Capability
Octet 2
0
0
0
0
0
1
1
1
Length
Octet 3
1
Extension
x
x
Radio Channel Requirement
0
Coding Standard: GSM
0
Transfer Mode: Circuit
0
1
0
Info. Transfer Cap.: 3,1 kHz Audio
Octet 4
1
Extension
y
Spare
x
x
Structure
1
Du... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.2.1.4 3,1 kHz Audio, Non Transparent mode, X.32 case (Packet Service) | BC GSM = 04 08 A2 XX 86 20 13 63 X3 C6
Octet 1
0
0
0
0
0
1
0
0
Information Element: Bearer Capability
Octet 2
0
0
0
0
1
0
0
0
Length
Octet 3
1
Extension
x
x
Radio Channel Requirement
0
Coding Standard: GSM
0
Transfer Mode: Circuit
0
1
0
Info. Transfer Cap.: 3,1 kHz Audio
Octet 4
1
Extension
y
Spare
0
0
Structure: SDU i... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.2.1.5 2) UDI, Non Transparent mode, X.32 case (Packet Service) | BC GSM = 04 08 X1 XX 96 20 13 63 A0 C6
Octet 1
0
0
0
0
0
1
0
0
Information Element: Bearer Capability
Octet 2
0
0
0
0
1
0
0
0
Length
Octet 3
1
Extension
x
x
Radio Channel Requirement
0
Coding Standard: GSM
0
Transfer Mode: Circuit
0
0
1
Info. Transfer Cap.: UDI
Octet 4
1
Extension
y
Spare
0
0
Structure: SDU integrity
1... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.2.2 BS 31 | For non X.32 case only, same as BS 32 except:
User Rate in Octet 6a:
-
-
-
-
0
0
1
0
1,2 kbit/s
If different from "none",
Modem Type Octet 6c:
-
-
-
0
0
0
1
0
Modem V.22
BS31 for Packet Service does not exist. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.2.3 BS 33 | Same as BS 32 except:
User Rate in Octet 6a:
-
-
-
-
0
1
0
0
4,8 kbit/s
If different from "none",
Modem Type Octet 6c:
-
-
-
0
0
1
1
0
Modem V.32 |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.2.4 BS 34 | Same as BS 32 except:
NIRR in Octet 4:
-
-
-
-
-
-
0
-
no meaning
User Rate in Octet 6a:
-
-
-
-
0
1
0
1
9,6 kbit/s
Interm. Rate in Octet 6b:
-
1
1
-
-
-
-
-
16 kbit/s
If different from "none",
Modem Type Octet 6c:
-
-
-
0
0
1
1
0
Modem V.32 |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.3 BS 41 to 46 - PAD Access Asynchronous | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.3.1 2) BS 41 | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.3.1.1 2) UDI, Transparent | BC GSM = 04 0X X1 X8 8C 21 X1 XX X0 (CX)
Octet 1
0
0
0
0
0
1
0
0
Information Element: Bearer Capability
Octet 2
0
0
0
0
0
1
1
1
Length
Octet 3
1
Extension
x
x
Radio Channel Requirement
0
Coding Standard: GSM
0
Transfer Mode: Circuit
0
0
1
Info. Transfer Cap.: UDI
Octet 4
1
Extension
y
Spare
x
x
Structure
1
Duplex Mode... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.3.1.2 2) UDI, Non transparent | BC GSM = 04 08 X1 XX 8C 21 X1 6X X0 CX
Octet 1
0
0
0
0
0
1
0
0
Information Element: Bearer Capability
Octet 2
0
0
0
0
1
0
0
0
Length.
Octet 3
1
Extension
x
x
Radio Channel Requirement
0
Coding Standard: GSM
0
Transfer Mode: Circuit
0
0
1
Info. Transfer Cap.: UDI
Octet 4
1
Extension
y
Spare
0
0
Structure: SDU Integrity
... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.3.2 BS 42 | Same as BS 41 except:
User Rate in Octet 6a:
-
-
-
-
0
0
1
0
1,2 kbit/s |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.3.3 BS 44 | Same as BS 41 except:
User Rate in Octet 6a:
-
-
-
-
0
0
1
1
2,4 kbit/s |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.3.4 BS 45 | Same as BS 41 except:
User Rate in Octet 6a:
-
-
-
-
0
1
0
0
4,8 kbit/s |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.3.5 BS 46 | Same as BS 41 except:
NIRR in Octet 4
-
-
-
-
-
-
0
-
no meaning
User Rate in Octet 6a:
-
-
-
-
0
1
0
1
9,6 kbit/s
Interm. Rate in Octet 6b:
-
1
1
-
-
-
-
-
16 kbit/s |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.3.6 BS 43 | Same as BS 41 except:
User Rate in Octet 6a:
-
-
-
-
0
1
1
1
1,2 kbit/s 75bit/s |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.4 BS 51 to 53 - Packet Service Synchronous | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.4.1 2) BS 51 | BC GSM = 04 08 X1 X8 96 20 13 63 A0 C6
Octet 1
0
0
0
0
0
1
0
0
Information Element: Bearer Capability
Octet 2
0
0
0
0
1
0
0
0
Length
Octet 3
1
Extension
x
x
Radio Channel Requirement
0
Coding Standard: GSM
0
Transfer Mode: Circuit
0
0
1
Info. Transfer Cap.: UDI
Octet 4
1
Extension
y
Spare
0
0
Structure: Unstructured
1
... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.4.2 BS 52 | Same as BS 51 except:
User Rate in Octet 6a:
-
-
-
-
0
1
0
0
4,8 kbit/s |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.4.3 BS 53 | Same as BS 51 except:
User Rate in Octet 6a:
-
-
-
-
0
1
0
1
9,6 kbit/s |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.5 BS 61 - Alternate Speech / Data | The first BC is coded as follows:
IF: speech full rate version 2 is supported by the mobile, see subclause 11.8.2.9.2;
ELSE: see subclause 11.8.2.9.1.
The repeat Indicator in the Setup message is coded "Circular for successive selection (alternate)": D1.
The second BC in the Setup message is coded as described below. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.5.1 Speech/Asynchronous Data, Transparent | BC GSM = 04 0X X2 X8 81 21 XX XX XX (CX)
Octet 1
0
0
0
0
0
1
0
0
Information Element: Bearer Capability
Octet 2
0
0
0
0
0
1
1
1
Length
Octet 3
1
Extension
x
x
Radio Channel Requirement
0
Coding Standard: GSM
0
Transfer Mode: Circuit
0
1
0
Info. Transfer Cap.: 3,1 kHz Audio
Octet 4
1
Extension
y
Spare
x
x
Structure
1
Du... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.5.2 Speech/Asynchronous Data, Non Transparent | BC GSM = 04 0X X2 XX 81 21 XX 6X XX (CX)
Octet 1
0
0
0
0
0
1
0
0
Information Element: Bearer Capability
Octet 2
0
0
0
0
x
x
x
x
Length (7 or 8) depending on presence of octet 7.
Octet 3
1
Extension
x
x
Radio Channel Requirement
0
Coding Standard: GSM
0
Transfer Mode: Circuit
0
1
0
Info. Transfer Cap.: 3,1 kHz Audio
Oct... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.5.3 Speech/Synchronous Data | BC GSM = 04 07 X2 X8 81 20 1X X3 8X
Octet 1
0
0
0
0
0
1
0
0
Information Element: Bearer Capability
Octet 2
0
0
0
0
0
1
1
1
Length
Octet 3
1
Extension
x
x
Radio Channel Requirement
0
Coding Standard: GSM
0
Transfer Mode: Circuit
0
1
0
Info. Transfer Cap.: 3,1 kHz Audio
Octet 4
1
Extension
y
Spare
1
1
Structure: Unstruct... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.6 BS 81 - Speech followed by Data | The first BC is coded as follows:
IF: speech full rate version 2 is supported by the mobile, see subclause 11.8.2.9.2.
ELSE: see subclause 11.8.2.9.1.
The repeat Indicator in the Setup message is coded "Circular for successive selection 'mode 1 alternate mode 2' : D1".
The second BC in the Setup message is coded as d... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.6.1 Speech followed by Asynchronous Data | See subclauses 11.8.2.5.1 and 11.8.2.5.2. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.6.2 Speech followed by Synchronous Data | See subclause 11.8.2.5.3. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.7 TS 61 - Alternate Speech / Facsimile group 3 | The first BC is coded as follows:
IF: speech full rate version 2 is supported by the mobile, see subclause 11.8.2.9.2.
ELSE: see subclause 11.8.2.9.1.
The repeat Indicator in the Setup message is coded "Circular for successive selection (alternate)": D1.
The second BC in the Setup message is coded as described below. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.7.1 TS 61 - Alternate Speech / Facsimile group 3, Transparent | BC GSM = 04 07 X3 X8 81 20 1X X3 80
Octet 1
0
0
0
0
0
1
0
0
Information Element: Bearer Capability
Octet 2
0
0
0
0
0
1
1
1
Length
Octet 3
1
Extension
y
y
Radio Channel Requirement: Spare
0
Coding Standard: GSM
0
Transfer Mode: Circuit
0
1
1
Info. Transfer Cap.: FAX3
Octet 4
1
Extension
y
Spare
1
1
Structure: Unstructur... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.7.2 TS 61 - Alternate Speech / Facsimile group 3, Non Transparent | BC GSM = 04 07 X3 XX 81 20 1X 63 X0 66
Octet 1
0
0
0
0
0
1
0
0
Information Element: Bearer Capability
Octet 2
0
0
0
0
0
1
1
1
Length
Octet 3
1
Extension
y
y
Radio Channel Requirement: Spare
0
Coding Standard: GSM
0
Transfer Mode: Circuit
0
1
1
Info. Transfer Cap.: FAX3
Octet 4
1
Extension
y
Spare
0
0
Structure: SDU Int... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.8 TS 62 - Automatic Facsimile group 3 | The repeat Indicator in the Setup message is not available.
The BC GSM is coded as described in subclause 11.8.2.7. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.9 TS 11 and TS 12 - Speech | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.9.1 Support of only full/half rate speech version 1 | The BC in the Setup message is coded as described below.
BC GSM = 04 01 X0
Octet 1
0
0
0
0
0
1
0
0
Information Element : Bearer Capability
Octet 2
0
0
0
0
0
0
0
1
Length
Octet 3
1
Extension
x
x
Radio Channel Requirement
0
Coding Standard : GSM
0
Transfer Mode : Circuit
0
0
0
Info. Transfer Cap. : speech |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.9.2 Support of speech full rate version 2 (Enhanced Full Rate) | This BC will be used by MS supporting EFR as the most advanced speech version. Those supporting EFR and newer codec speech version such as speech version 3, half rate speech version 2 will not use this BC.
The BC is coded as described below.
BC GSM = 04 0X X0 0X XX (8X)
Octet 1
0
0
0
0
0
1
0
0
Information Element : Be... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 11.8.2.9.3 Support of full rate speech version 2 (EFR) and full and/or half rate speech version 3 (AMR) | The BC is coded as described below.
BC GSM: 04 0X X0 0X 0X XX (XX) (8X)
Octet 1
0
0
0
0
0
1
0
0
Information Element : Bearer Capability
Octet 2
0
0
0
0
0
x
x
x
Length
Octet 3
0
Extension
x
x
Radio Channel Requirement
0
Coding Standard : GSM
0
Transfer Mode : Circuit
0
0
0
Info. Transfer Cap. : speech
Octet_3a_1
0
Exte... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.1 Conducted spurious emissions | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.1.1 MS allocated a channel | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.1.1.1 Definition | Conducted spurious emissions, when the MS has been allocated a channel, are emissions from the antenna connector at frequencies other than those of the carrier and sidebands associated with normal modulation. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.1.1.2 Conformance requirement | 1. The conducted spurious power emitted by the MS, when allocated a channel, shall be no more than the levels in table 12.1.
1.1 Under normal voltage conditions; 3GPP TS 45.005, subclauses 4.3 and 4.3.3.
1.2 Under extreme voltage conditions; 3GPP TS 45.005, subclauses 4.3 and 4.3.3, and clause D.2.
Table 12.1
Frequency... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.1.1.3 Test purpose | 1. To verify that conducted spurious emissions from the MS when allocated a channel do not exceed the conformance requirements. These conducted spurious emissions will be measured in the frequency band 100 kHz to 12,75 GHz excluding the following received bands:
For GSM 400, GSM 900 and DCS 1 800:
- the band 925 MHz to... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.1.1.4 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.1.1.4.1 Initial conditions | For circuit switched capable devices, a call is set up by the SS according to the generic call set up procedure on a channel in the Mid ARFCN range.
The SS may command the MS to loop back its channel decoder output to channel encoder input.
The SS sends Standard Test Signal C1.
The SS sets the MS to operate at its maxi... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.1.1.4.2 Procedure | a) Measurements are made in the frequency range 100 kHz to 12,75 GHz. Spurious emissions are measured at the connector of the transceiver, as the power level of any discrete signal, higher than the requirement in table 12.1 minus 6 dB, delivered into a 50 load.
The measurement bandwidth based on a 5 pole synchronousl... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.1.1.5 Test requirement | The power of any spurious emission shall not exceed the levels given in table 12.3.
Table 12.3
Frequency range
Power level in dBm
GSM 400, GSM 700,
T-GSM 810,
GSM 850,
GSM 900
DCS 1 800
PCS 1 900
100 kHz to
1 GHz
-36
-36
-36
1 GHz to
12,75 GHz
-30
-30
1 GHz to
1710 MHz
-30
1 710 MHz to
1 785 MHz
-36
1 785 MHz to
12,75 ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.1.2 MS in idle mode | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.1.2.1 Definition | Conducted spurious emissions are any emissions from the antenna connector, when the MS is in idle mode. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.1.2.2 Conformance requirement | 1. The conducted spurious power emitted by the MS, when in idle mode, shall be no more than the levels in table 12.4.
1.1 Under normal voltage conditions; 3GPP TS 05.05, subclauses 4.3 and 4.3.3.
1.2 Under extreme voltage conditions; 3GPP TS 05.05, subclauses 4.3 and 4.3.3, and clause D.2.
Table 12.4
Frequency range
Po... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.1.2.3 Test purpose | 1. To verify that conducted spurious emissions, in the frequency band 100 kHz to 12,75 GHz from the MS when in idle mode do not exceed the conformance requirements.
1.1 Under normal voltage conditions.
1.2 Under extreme voltage conditions.
NOTE: The band 9 KHz to 100 kHz is not tested, because of test implementation pr... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.1.2.4 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.1.2.4.1 Initial conditions | The RF power level of the BCCH shall not exceed –80 dBm in order to prevent conflicts in the frequency range 915 MHz to 1000 MHz (see Table 12.6, row 3). The page mode is continuously set to Paging Reorganization and BS_AG_BLKS_RES is set to 0 so that the MS receiver will operate continually.
The CCCH_CONF shall be set... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.1.2.4.2 Procedure | a) Measurements are made in the frequency range 100 kHz to 12,75 GHz. Spurious emissions are measured as the power level of any discrete signal, higher than the requirement in table 12.4 minus 6 dB, delivered into a 50 load.
The measurement bandwidth based on a 5 pole synchronously tuned filter is set according to ta... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.1.2.5 Test requirement | The power of any spurious emission shall not exceed the levels given in table 12.6.
Table 12.6
Frequency range
Power level in dBm
GSM 400,
T-GSM 810
GSM 900,
DCS 1 800
GSM 700,
GSM 850,
PCS 1 900
100 kHz to
880 MHz
-57
-57
880 MHz to
915 MHz
-59
-57
915 MHz to
1 000 MHz
-57
-57
1 GHz to
1 710 MHz
-47
1 710 MHz to
1 785... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.2 Radiated spurious emissions | This test is performed either on an outdoor test site, fulfilling the requirements of [GC4 of annex 1], or in an anechoic shielded chamber, fulfilling the requirements of ([GC5 of annex 1)]. Performing the measurement in the anechoic shielded chamber is preferred. The sample shall be placed at the specified height on t... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.2.1 MS allocated a channel | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.2.1.1 Definition | Radiated spurious emissions, when the MS has been allocated a channel, are any emissions radiated by the cabinet and structure of the mobile station, including all interconnecting cables.
This is also known as "cabinet radiation".
The test applies to all types of MS with the exception of the test at extreme voltages fo... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.2.1.2 Conformance requirement | 1. The radiated spurious power emitted by the MS, when allocated a channel, shall be no more than the levels in table 12.7 under normal voltage conditions; 3GPP TS 05.05, subclauses 4.3 and 4.3.3.
2. The radiated spurious power emitted by the MS, when allocated a channel, shall be no more than the levels in table 12.7 ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.2.1.3 Test purpose | 1. To verify that radiated spurious emissions from the MS when allocated a channel do not exceed the conformance requirements under normal voltage conditions.
2. To verify that radiated spurious emissions from the MS when allocated a channel do not exceed the conformance requirements under extreme voltage conditions. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.2.1.4 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.2.1.4.1 Initial conditions | A call is set up by the SS according to the generic call set up procedure on a channel in the Mid ARFCN range.
NOTE: The power supply shall be connected to the MS such that the physical configuration does not change in a way that could have an effect on the measurement. In particular, the battery pack of the MS should ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.2.1.4.2 Procedure | a) Initially the test antenna is closely coupled to the MS and any spurious emission radiated by the MS is detected by the test antenna and receiver in the range 30 MHz to 4 GHz.
NOTE 1: This is a qualitative step to identify the frequency and presence of spurious emissions which are to be measured in subsequent steps.... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.2.1.5 Test requirement | The power of any spurious emission shall not exceed the levels given in table 12.7. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.2.2 MS in idle mode | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.2.2.1 Definition | Radiated spurious emissions, when the MS is in idle mode, are any emissions radiated by the cabinet and structure of the mobile station, including all interconnecting cables.
This is also known as "cabinet radiation".
The test applies to all types of MS with the exception of the test at extreme voltages for an MS where... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.2.2.2 Conformance requirement | 1. The radiated spurious power emitted by the MS, when in idle mode, shall be no more than the levels in table 12.9. under normal voltage conditions; 3GPP TS 05.05, subclauses 4.3 and 4.3.3.
2. The radiated spurious power emitted by the MS, when in idle mode, shall be no more than the levels in table 12.9. under extrem... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.2.2.3 Test purpose | 1. To verify that radiated spurious emissions from the MS when in idle mode do not exceed the requirements under normal voltage conditions.
2. To verify that radiated spurious emissions from the MS when in idle mode do not exceed the requirements under extreme voltage conditions. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.2.2.4 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.2.2.4.1 Initial conditions | NOTE 1: The power supply shall be connected to the MS such that the physical configuration does not change in a way that could have an effect on the measurement. In particular, the battery pack of the MS should not normally be removed. In cases where no practical connection can be made to the power supply, the MS's int... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.2.2.4.2 Procedure | a) Initially the test antenna is closely coupled to the MS and any spurious emission radiated by the MS is detected by the test antenna and receiver in the range 30 MHz to 4 GHz.
NOTE 1: This is a qualitative step to identify the frequency and presence of spurious emissions which are to be measured in subsequent steps.... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.2.2.5 Test requirement | The power of any spurious emission shall not exceed the levels given in table 12.9. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.3 Conducted spurious emissions for MS supporting the R-GSM or ER-GSM frequency band | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.3.1 MS allocated a channel | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.3.1.1 Definition | Conducted spurious emissions, when the MS has been allocated a channel, are emissions from the antenna connector at frequencies other than those of the carrier and sidebands associated with normal modulation. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.3.1.2 Conformance requirement | 1. The conducted spurious power emitted by the MS, when allocated a channel, shall be no more than the levels in table 12.11.
1.1 Under normal voltage conditions; 3GPP TS 05.05, subclauses 4.3 and 4.3.3.
1.2 Under extreme voltage conditions; 3GPP TS 05.05, subclause 4.3 and 4.3.3, and clause D.2.
Table 12.11
Frequency ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.3.1.3 Test purpose | 1. To verify that conducted spurious emissions, in the frequency band 100 kHz to 12,75 GHz excluding the R-GSM 900, the ER-GSM 900 and DCS 1 800 receive bands, from the MS when allocated a channel do not exceed the conformance requirements.
1.1 Under normal voltage conditions.
1.2 Under extreme voltage conditions.
NOTE... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.3.1.4 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.3.1.4.1 Initial conditions | A call is set up by the SS according to the generic call set up procedure on a channel in the Mid ARFCN range.
The SS may command the MS to loop back its channel decoder output to channel encoder input.
The SS sends Standard Test Signal C1.
The SS sets the MS to operate at its maximum output power. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.3.1.4.2 Procedure | a) Measurements are made in the frequency range 100 kHz to 12,75 GHz. Spurious emissions are measured at the connector of the transceiver, as the power level of any discrete signal, higher than the requirement in table 12.11 minus 6 dB, delivered into a 50 load.
The measurement bandwidth based on a 5 pole synchronous... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.3.1.5 Test requirement | The power of any spurious emission shall not exceed the levels given in table 12.13.
Table 12.13
Frequency range
Power level in dBm
R-GSM 900
small MS
R-GSM 900
other MS
ER-GSM 900
small MS
ER-GSM 900
other MS
100 kHz to
1 GHz
-36
-36
100 kHz to
876 MHz
-36
100 kHz to
873 MHz
-36
876 MHz to
915 MHz
-42
873 MHz to
915 M... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 12.3.2 MS in idle mode |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.