hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.3.3 Test purpose | To verify that the ME does not attempt to disable the PIN. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.3.4 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.3.4.1 Initial conditions | The ME is connected to the SIM simulator.
Elementary files in the SIM simulator shall be default, with the exception of:
EFSST (SIM Service Table)
Logically: CHV1 disable function not activated.
Abbreviated dialling numbers allocated and activated.
PLMN selector allocated and activated.
Fixed dialling numbers not activ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.3.4.2 Procedure | Using the ME's MMI procedure, an attempt is made to disable the PIN. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.3.5 Test requirement | The ME shall not send a DISABLE CHV command across the SIM/ME interface. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.4 PUK entry | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.4.1 Definition | After three consecutive wrong entries of the PIN, the PIN becomes blocked. The PUK is used to unblock the PIN. This function may be performed whether or not the PIN is blocked. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.4.2 Conformance requirement | The ME shall support the procedure to unblock PIN using PUK, as defined in 3GPP TS 02.30 and 3GPP TS 11.11.
Reference:
3GPP TS 02.30, subclause 4.6.3; 3GPP TS 11.11, subclauses 8.13, 9.2.13 and 11.3.5. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.4.3 Test purpose | 1. To verify that the CHV unblocking procedure is performed correctly.
2. To verify that the GSM basic public MMI string is supported. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.4.4 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.4.4.1 Initial conditions | The ME is connected to the SIM simulator.
The default SIM is used.
Specific PICS Statements:
- support of basic public MMI strings to change/unblock PIN (TSPC_PIN_MMI_Strings) |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.4.4.2 Procedure | Step ‘a’ up to and including step ‘e’ are applicable if MS supports basic public MMI strings to change/unblock PIN (TSPC_PIN_MMI_Strings).
a) The ME is powered on.
b) Enter "**05*13243546*1234*1234#"
c) The ME is powered off and on.
d) Enter the new PIN: "1234".
e) The ME is powered off.
f) The ME is powered on.
g) Ent... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.4.5 Test requirements | Test requirement 1 and Test requirement 2 are not applicable for an ME that does not support basic public MMI strings to change/unblock PIN (TSPC_PIN_MMI_Strings)..
1. After step b), the ME shall send an UNBLOCK CHV command to the SIM, with CHV number = "00".
2. After step d), the ME shall indicate that the PIN has bee... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.5 Entry of PIN2 | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.5.1 Definition | PIN2 is a number used to authenticate the user to the SIM for security. Entry of the correct PIN2 allows PIN2-protected data to be accessed over the SIM-ME interface. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.5.2 Conformance requirement | Where entry of PIN2 is necessary for security access, the ME shall indicate that PIN2 is to be entered.
The VERIFY CHV function verifies the PIN presented by the ME to the SIM.
Reference:
3GPP TS 02.30, subclause 4.6.1; 3GPP TS 11.11, subclauses 8.9, 9.2.9 and 11.3.1. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.5.3 Test purpose | To verify that entry of PIN2 is processed by the ME correctly. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.5.4 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.5.4.1 Initial conditions | The ME is connected to a SIM or SIM-simulator and powered on, with the correct PIN entered.
A default FDN SIM is used. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.5.4.2 Procedure | a) A feature is accessed which requires the entry of PIN2, e.g. resetting ACM for Advice of Charge, or changing a Fixed Dialling Number.
b) The MMI is used to enter PIN2: "3579". |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.5.5 Test requirement | 1) After step b), the ME shall send a VERIFY CHV command to the SIM, with CHV number = "02".
2) Following the successful execution of the command, the MS shall give an indication that PIN2 was accepted. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.6 Change of PIN2 | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.6.1 Definition | The PIN2 may be changed by the user, by entering the old and new PIN2s. The length of the PIN is between 4 and 8 digits. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.6.2 Conformance requirement | The ME shall support the change of PIN2 procedure as defined in 3GPP TS 02.30 and 3GPP TS 11.11.
Reference:
3GPP TS 02.30, subclause 4.6.2; 3GPP TS 11.11, subclauses 8.10, 9.2.10 and 11.3.2. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.6.3 Test purpose | 1. To verify that PIN2 substitution procedure is performed correctly by the ME.
2. To verify that the GSM basic public MMI string is supported. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.6.4 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.6.4.1 Initial conditions | The ME is connected to a SIM or SIM-simulator.
The default FDN SIM is used, with PIN enabled.
The ME is powered on, with the correct PIN entered.
Specific PICS Statements:
- support of basic public MMI strings to change/unblock PIN (TSPC_PIN_MMI_Strings) |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.6.4.2 Procedure | a) When the public basic MMI strings to change/unblock PIN are supported enter "**042*3579*12345678*12345678#", else initiate an equivalent MMI dependent procedure to change the PIN2 from '3579' to '12345678'.
b) The MS is switched off and on, and PIN entered: "2468".
c) When the public basic MMI strings to change/unbl... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.6.5 Test requirement | 1) After step a), the ME shall send a CHANGE CHV command to the SIM, with CHV number set to "02".
2) Following the successful execution of the command, the MS shall give an indication that the new PIN2 is accepted.
3) After step c), the MS shall give an indication that the new PIN2 is not accepted.
4) After step d), th... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.7 PUK2 entry | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.7.1 Definition | After three consecutive wrong entries of PIN2, it becomes blocked. PUK2 is used to unblock PIN2. This function may be performed whether or not PIN2 is blocked. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.7.2 Conformance requirement | The ME shall support the procedure to unblock PIN2 using PUK2, as defined in 3GPP TS 02.30 and 3GPP TS 11.11.
Reference:
3GPP TS 02.30, subclause 4.6.3; 3GPP TS 11.11, subclauses 8.13, 9.2.13 and 11.3.5. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.7.3 Test purpose | 1. To verify that the PUK2 unblock procedure is performed correctly by the ME.
2. To verify that the GSM basic public MMI string is supported. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.7.4 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.7.4.1 Initial conditions | The ME is connected to the SIM simulator.
The default FDN SIM is used, with PIN enabled.
Specific PICS Statements:
- support of basic public MMI strings to change/unblock PIN (TSPC_PIN_MMI_Strings) |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.7.4.2 Procedure | Step ‘a’ up to and including step ‘c’ are applicable if MS supports basic public MMI strings to change/unblock PIN (TSPC_PIN_MMI_Strings).
a) The ME is powered on and a correct PIN entered.
b) Enter "**052*08978675*1234*1234#".
c) The MS is powered off.
d) The MS is powered on, and a correct PIN entered.
e) A feature i... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.14.7.5 Test requirements | Test requirement 1 is not applicable for an ME that does not support basic public MMI strings to change/unblock PIN (TSPC_PIN_MMI_Strings)..
1. After step b), the ME shall send an UNBLOCK CHV command to the SIM, with CHV number = "02".
2. After step f), the ME shall indicate that PIN2 has been blocked.
3. After step g)... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.15 Abbreviated Dialling Numbers (ADN) | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.15.1 Definition | Abbreviated Dialling Numbers contain subscriber number and supplementary service control strings. They may also contain alpha identifiers. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.15.2 Conformance requirement | The ME shall be able to manage the storage and retrieval of ADNs from the SIM, and set up calls to these numbers.
Reference:
3GPP TS 02.07, subclause B.3.1; 3GPP TS 02.30 subclause 4.6.4; 3GPP TS 11.11, subclause 11.5.1. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.15.3 Test purpose | To verify that the ME manages the storage and retrieval of ADNs from the SIM. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.15.4 Method of Test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.15.4.1 Initial conditions | Coding of elementary files in the SIM shall be as default, with the addition of:
EFADN (Abbreviated Dialling Number)
Logically:
At least 101 records, each record unique. Example of record 1 below
Record 1: Length of alpha identifier: 32 characters
Alpha identifier: "ABCDEFGHIJKLMNOPQRSTUVWXYZABCDEF"
Length of BCD numb... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.15.4.2 Procedure | a) Retrieve data from SIM entry number 7 using the procedure N(N)(N)#.
b) Retrieve data from SIM entry number 6 using the procedure N(N)(N)#.
c) Retrieve data from SIM entry number 101 using the procedure N(N)(N)#.
d) Retrieve data from SIM entry number 1 using the procedure N(N)(N)#. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.15.5 Test requirements | 1) After step a), the number "+123456789012345" shall be displayed.
2) After step b), the number "00112233" shall be displayed.
3) After step c), the number "**21*44556677#" (or an equivalent representation) shall be displayed.
4) After step d), the number “123” shall be displayed. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.16 MMI reaction to SIM status encoding | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.16.1 Definition | The SIM gives status information in response to instructions, as two-byte codes. Some of these codes give valuable information to the user, and appropriate indication by the ME is mandatory. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.16.2 Conformance requirement | It is mandatory to give the user an appropriate indication when any of the codes given below appear.
Reference:
3GPP TS 02.30, subclause 4.6.5. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.16.3 Test purpose | To verify that the ME gives an appropriate indication to the user in response to status information return codes from the SIM. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.16.4 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.16.4.1 Initial conditions | The ME is connected to the SIM simulator. All elementary files are coded as default.
The ME is powered on.
27.16.4.2 Procedure.
The SIM simulator is used to send the following error codes as reaction on an instruction from the ME:
- 9240 Memory Problem;
- 9804 Access security policy not fulfilled or secret code rejecte... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.16.5 Test requirement | For each error code, the ME shall give an appropriate MMI indication. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17 Electrical tests | General test purpose
Testing of electrical characteristics of the SIM/ME interface.
Whilst non-conformance in this area would be unlikely to cause difficulties to other users or the network (type approval criteria), significant deviations from the specifications (3GPP TS 11.11 and ISO 7816) may damage the SIM. If an at... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1 Test of the power transition phases | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.1 Phase preceding ME power on | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.1.1 Definition | When the mobile equipment is switched off, the contacts of the SIM/ME interface remain in an inactive state in order to prevent any damage to the SIM. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.1.2 Conformance requirement | The residual voltage across the contacts of the SIM/ME interface (C1, C2, C3, C6, C7) shall not exceed ± 0,4 Volts referenced to GND.
Reference:
3GPP TS 11.11, subclause 4.3.3. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.1.3 Test purpose | To verify that the residual voltage across the contacts of the SIM/ME interface (C1, C2, C3, C6, C7) is not greater than ± 0,4 Volts referenced to GND. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.1.4 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.1.4.1 Initial condition | The ME is connected to a SIM Simulator.
The contact C1 (Vcc) of the SIM/ME interface is loaded with an impedance of 10 kOhm.
The other contacts (C2, C3, C6, C7) are loaded with an impedance of 50 kOhm. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.1.4.2 Procedure | The residual voltage on each contact is measured. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.1.5 Test requirement | The residual voltage on each contact shall not exceed ±0,4 Volts referenced to GND. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.2 Phase during SIM power on | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.2.1 Definition | When the mobile station is switched on or when the SIM/ME interface is being activated after 3V/5V or 1,8V/3V switching, the contacts shall be activated in a defined sequence in order to prevent any damage to the SIM.
The timing of this sequence is not defined, a measurement resolution better than or equivalent to 100 ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.2.2 Conformance requirement | a) When the MS is soft powered on, the contacts of the SIM/ME interface shall be activated in the following order:
1. VCC at state H and stable;
2. CLK stable;
3. RST at state L for at least 400 clock cycles after the clock signal is applied to CLK;
4. I/O at state Z within 200 clock cycles after the clock signal i... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.2.3 Test purpose | To verify that the contacts of the SIM/ME interface are activated in the correct order, as described in the conformance requirement. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.2.4 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.2.4.1 Initial condition | The ME is connected to a SIM Simulator. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.2.4.2 Procedure | To test the requirements a), b), c.1), d) and e.1) the MS is soft powered on.
To test the requirement c.2) and e.2), the ME is caused to switch the voltage on the SIM/ME interface.
The verification of each activation procedure starts with the first contact leaving the inactive state. The SIM/ME interface is monitored u... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.2.5 Test requirement | The contacts of the SIM/ME interface shall be activated in the correct order, as described in the conformance requirement. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.3 Phase during ME power off with clock stop forbidden | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.3.1 Definition | When the mobile station is soft powered off, the contacts shall be deactivated in a defined sequence in order to prevent any damage to the SIM.
The timing of this sequence is not defined, a measurement resolution better than or equivalent to 100 ns is assumed.
NOTE 1: If during MS operation the SIM is physically remove... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.3.2 Conformance requirement | a) When the ME is soft powered down, the contacts of the SIM/ME interface shall be deactivated in the following order:
1. RST at low state;
2. Clock stopped at low state;
3. Vpp inactive (only if Vpp is provided independent of Vcc, see 3GPP TS 11.11 subclause 5.3);
4. I/O at state A;
5. Vcc inactive.
b) When Vpp is con... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.3.3 Test purpose | To verify that the contacts of the SIM/ME interface become deactivated in the correct order, as given in the conformance requirement. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.3.4 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.3.4.1 Initial condition | The ME is connected to a SIM Simulator.
The file characteristics of the directories (byte 14 of STATUS information) shall indicate a 5V SIM with clock stop forbidden. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.3.4.2 Procedure | The MS is soft powered off.
The SIM/ME interface is monitored until it is fully deactivated. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.3.5 Test requirement | The contacts of the SIM/ME interface shall be deactivated in the correct order, as given in the conformance requirement. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.4 Phase during ME power off with clock stop allowed | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.4.1 Definition | When the mobile station is soft powered off or when the SIM/ME interface is being deactivated for 3V/5V or 1,8V/3V switching, the contacts shall be deactivated in a defined sequence in order to prevent any damage to the SIM.
The timing of this sequence is not defined, a measurement resolution better than or equivalent ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.4.2 Conformance requirement | a) Depending on the state of the clock at the time of deactivation, the contacts of the SIM/ME shall be deactivated in one of two ways.
If the clock is running, the contacts of the SIM/ME interface shall be deactivated in the following order:
1. RST at low level;
2. Clock stopped at low level;
3. Vpp inactive (only if ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.4.3 Test purpose | To verify that, depending on the state of the clock (running or stopped), the contacts of the SIM/ME interface become deactivated in the correct order, as given in the conformance requirement. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.4.4 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.4.4.1 Initial condition | The ME is connected to a SIM Simulator.
The file characteristics of the directories (byte 14 of STATUS information) shall indicate that clock stop is allowed. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.4.4.2 Procedure | To test the requirements a), b), c.1), d) and e.1), the MS is soft powered off.
To test the requirement c.2) and e.2), the ME is caused to switch the voltage on the SIM/ME interface.
The SIM/ME interface is monitored until it is fully deactivated. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.4.5 Test requirement | The contacts of the SIM/ME interface shall be deactivated in the correct order, as given in the conformance requirements. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.5 SIM Type Recognition and Voltage Switching | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.5.1 Reaction of 3V only MEs on SIM type recognition failure | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.5.1.1 Definition | When a 3V only ME detects a failure during the SIM type recognition procedure, the ME shall reject the SIM in order to prevent any damage to the SIM. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.5.1.2 Conformance requirement | 1) The procedure for deriving the identification bit (SIM type recognition procedure) shall be performed by the ME immediately after the ATR and before issuing any other command. The procedure shall consist of the two commands "SELECT GSM" and "STATUS/GET RESPONSE".
2) If a 3V only ME cannot complete the SIM type recog... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.5.1.3 Test purpose | 1) To verify that a 3V only ME correctly performs the SIM type recognition procedure.
2) To verify that a 3V only ME deactivates the SIM/ME interface and rejects the SIM in case that the SIM does not respond to the "STATUS/GET RESPONSE" command. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.5.1.4 Method of test | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.5.1.4.1 Initial condition | The ME is connected to a SIM Simulator simulating a 3V technology SIM with nominal test conditions according to table 27.2‑2. All elementary files are coded as default.
The ME is powered on. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.5.1.4.2 Procedure | After sending the ATR the SIM simulator checks the presence of the commands "SELECT GSM" and "STATUS/GET RESPONSE" as the first and only commands of the GSM card session.
The SIM simulator does not respond to the "STATUS/GET RESPONSE" command.
The SIM/ME interface is monitored for at least 1 minute until the MS is swit... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.5.1.5 Test requirement | 1) Immediately after the ATR only the two commands "SELECT GSM" and "STATUS/GET RESPONSE" shall be sent by the ME.
2) The 3V only ME shall deactivate the SIM/ME interface within 5 s and reject the SIM (i.e. not activate the SIM/ME interface within the test procedure). |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.5.2 Reaction of 3V only MEs on type recognition of 5V only SIMs | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.5.2.1 Definition | When a 3V only ME detects a 5V only SIM during the SIM type recognition procedure, the ME shall reject the SIM in order to prevent any damage to the SIM. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.5.2.2 Conformance requirement | 1) The procedure for deriving the identification bit (SIM type recognition procedure) shall be performed by the ME immediately after the ATR and before issuing any other command. The procedure shall consist of the two commands "SELECT GSM" and "STATUS/GET RESPONSE"
2) If a 3V only ME identifies a 5V only SIM during the... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.5.2.3 Test purpose | 1) To verify that a 3V only ME correctly performs the SIM type recognition procedure.
2) To verify that a 3V only ME deactivates the SIM/ME interface and rejects the SIM if a 5V only SIM is applied. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 27.17.1.5.2.4 Method of test |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.