hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.4.1.1 Conformance requirement | When a DM response with the F bit set to 0 is received by an LLE, a collision between a transmitted SABM or DISC command and the unsolicited DM response may have occurred.
A DM response with the F bit set to 0 colliding with a SABM or DISC shall be ignored.
An LLE shall ignore a DM response received with F=0 when it is... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5 FRMR frames | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5.1 Sending FRMR due to undefined command control field | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5.1.1 Conformance requirement | The FRMR unnumbered response may be received by an LLE as a report of a frame rejection condition not recoverable by retransmission of the identical frame:
- receipt of a command or response control field that is undefined or not implemented;
- receipt of a supervisory or unnumbered frame with incorrect length; or
- re... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5.1.2 Test purpose | To verify that if the MS receives a frame with a command control field that is not implemented, it sends an FRMR frame and re-establishes the link. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5.1.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
After establishing a link, initiate data transfer from the MS. After receiving the first frame, send a supervisory frame from the SS to acknowledge the last I+S frame received. In this set the first byte of the S frame control field to ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5.2 Sending FRMR due to reception of an S frame with incorrect length | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5.2.1 Conformance requirement | The FRMR unnumbered response may be received by an LLE as a report of a frame rejection condition not recoverable by retransmission of the identical frame:
- receipt of a command or response control field that is undefined or not implemented;
- receipt of a supervisory or unnumbered frame with incorrect length; or
- re... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5.2.2 Test purpose | To verify that if the MS receives an S frame with incorrect length, it sends an FRMR frame and re-establishes the link. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5.2.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
After establishing a link, initiate data transfer from the MS. Send an RR with incorrect length, from the SS, when an I+S frame from the MS with the A bit set is received. Verify whether the MS sends an FRMR. After the link is re-establ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5.3 Sending FRMR due to reception of an I frame information field exceeding the maximum length | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5.3.1 Conformance requirement | The FRMR unnumbered response may be received by an LLE as a report of a frame rejection condition not recoverable by retransmission of the identical frame:
- receipt of a command or response control field that is undefined or not implemented;
- receipt of a supervisory or unnumbered frame with incorrect length; or
- re... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5.3.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
After establishing a link, initiate data transfer from the SS. After sending 5 frames from the SS, send an I+S frame with length greater than N201-I, from the SS. Verify whether the MS sends an FRMR. After the link is re-established, se... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5.4 Frame reject condition during establishment of ABM | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5.4.1 Conformance requirement | The FRMR unnumbered response may be received by an LLE as a report of a frame rejection condition not recoverable by retransmission of the identical frame:
- receipt of a command or response control field that is undefined or not implemented;
- receipt of a supervisory or unnumbered frame with incorrect length; or
- re... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5.4.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
Initiate link establishment from the MS by sending a SABM. Send an invalid U frame as response. Check if the MS resends the SABM. Respond with a UA. Initiate data transfer from the MS and acknowledge all the frames sent from the MS.
Max... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.6 Multiple Connections | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.6.1 Simultaneous acknowledged and unacknowledged data transfer on the same SAPI | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.6.1.1 Conformance requirement | The purpose of LLC is to convey information between layer-3 entities in the MS and SGSN. Specifically, LLC shall support:
- multiple MSs, at the Um interface;
- multiple layer-3 entities within the MS.
Reference
3GPP TS 04.64, subclause 4.2.
46.1.2.6.1.2 Test purpose
To verify that LLC supports simultaneous acknowledg... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.6.1.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
Initiate acknowledged data transfer from the MS on SAPI 3. Send 300 frames continuously. The value of N(S) shall begin from 0 and increment by 1 mod (512) for each frame. Initiate unacknowledged data transfer from the MS on the same SAP... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.6.2 Simultaneous acknowledged and unacknowledged data transfer on different SAPIs | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.6.2.1 Conformance requirement | The purpose of LLC is to convey information between layer-3 entities in the MS and SGSN. Specifically, LLC shall support:
- multiple MSs, at the Um interface;
- multiple layer-3 entities within the MS.
Reference
3GPP TS 04.64, subclause 4.2. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.6.2.2 Test purpose | To verify that LLC supports simultaneous acknowledged and unacknowledged data transfer on different SAPIs in different directions. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.6.2.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
Initiate unacknowledged data transfer from the MS on SAPI 5. Initiate acknowledged data transfer from the SS on SAPI 3 after the first i frames have been received from the MS. Send 300 I+S frames continuously from the SS. The value of N... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7 XID Negotiation | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.1 Negotiation initiated by the SS during ABM, for T200 and N200 | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.1.1 Conformance requirement | The negotiation procedure is one-step, i.e., one side shall start the process by sending an XID command, offering a certain set of parameters from the applicable parameter repertoire the sending entity wants to negotiate, proposing values within the allowed range. In return, the other side shall send an XID response, e... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.1.2 Test purpose | To verify that when the SS initiates XID negotiations with a certain value of T200 and N200, the MS complies with the final negotiated values |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.1.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
Initiate XID negotiation from the SS, with N200 = 4 and T200 = 10 s. The MS will send an XID response. Initiate data transfer from the MS. Verify that the MS complies with the values of T200 and N200 that were agreed upon.
Maximum durat... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.2 Negotiation initiated by the SS during ADM, for N201-I | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.2.1 Conformance requirement | The negotiation procedure is one-step, i.e., one side shall start the process by sending an XID command, offering a certain set of parameters from the applicable parameter repertoire the sending entity wants to negotiate, proposing values within the allowed range. In return, the other side shall send an XID response, e... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.2.2 Test purpose | To verify that when the SS initiates XID negotiations with a certain value of N201-I during ADM, the MS complies with the final negotiated values. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.2.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
Initiate PDP context activation from the MS and in the UA response from the SS send a value of 140 for N201-I. If the MS responds with an XID command, in the XID response, give N201-I = 140.
Initiate data transfer from the SS. Send an I... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.3 Negotiation initiated by the SS (using XID, for IOV-UI) | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.3.1 Conformance requirement | The negotiation procedure is one-step, i.e., one side shall start the process by sending an XID command, offering a certain set of parameters from the applicable parameter repertoire the sending entity wants to negotiate, proposing values within the allowed range. In return, the other side shall send an XID response, e... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.3.2 Test purpose | To verify that when the SS sends IOV-UI to the MS in a XID, the MS shall cipher its output using this value of IOV-UI. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.3.3 Method of test | Initial conditions
For parameter K = 4 (GEA4) Test USIM has to be plugged into the MS. The MS shall be GPRS attached with ciphering enabled. Encryption GEA3 or GEA4 is used depending on the parameter K.
Specific PICS statements:
- Supported encryption Algorithm: GEA3 (TSPC_Feat_GEA3)
- Supported encryption Algorithm: G... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.4 Negotiation initiated by the SS (during ADM, for N201-U) | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.4.1 Conformance requirement | The negotiation procedure is one-step, i.e., one side shall start the process by sending an XID command, offering a certain set of parameters from the applicable parameter repertoire the sending entity wants to negotiate, proposing values within the allowed range. In return, the other side shall send an XID response, e... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.4.2 Test purpose | To verify that when the SS initiates XID negotiations with a certain value of N201-U during ADM, the MS complies with the final negotiated values. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.4.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
Initiate XID negotiation from the SS, with N201-U = 140. The MS shall send an XID response. The value of N201-U shall either be not present in the XID response or set to 140.
Initiate data transfer from the MS. Verify that the length of... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.5 Negotiation initiated by the SS (during ADM, for IOV-UI) | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.5.1 Conformance requirement | The negotiation procedure is one-step, i.e., one side shall start the process by sending an XID command, offering a certain set of parameters from the applicable parameter repertoire the sending entity wants to negotiate, proposing values within the allowed range. In return, the other side shall send an XID response, e... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.5.2 Test purpose | To verify that when the SS sends IOV-UI to the MS in an XID command:
- The MS shall cipher its output using this value of IOV-UI.
- This value of IOV-UI shall be applicable for all SAPIs using this TLLI.
- Identity Response sent from the MS shall not be ciphered. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.5.3 Method of test | Initial conditions
- For parameter K = 4 (GEA4) Test USIM has to be plugged into the MS.
Specific PICS statements:
- Supported encryption Algorithm : GEA3 (TSPC_Feat_GEA3)
- Supported encryption Algorithm : GEA4 (TSPC_Feat_GEA4)
PIXIT statements:
-
Test procedure
Send a value of IOV-UI from the SS, different from the d... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.6 Negotiation initiated by the SS (during ABM, for Reset) | Send Reset during unacknowledged mode data transfer and check if N(S) begins from 0. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.6.1 Conformance requirement | The negotiation procedure is one-step, i.e., one side shall start the process by sending an XID command, offering a certain set of parameters from the applicable parameter repertoire the sending entity wants to negotiate, proposing values within the allowed range. In return, the other side shall send an XID response, e... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.6.2 Test purpose | To verify that when the SS sends the Reset parameter to the MS in an XID:
- it sets all LLC layer parameters to the default values;
- change any LLEs in ABM state to ADM state;
- set the unconfirmed state variable V(U) to value 0;
- set the unconfirmed receive state variable V(UR) to 0;
- set the OCs for unacknowledged... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.6.3 Method of test | Initial conditions
System simulator
The System Simulator shall support two cells, each in a different SGSN Routing Area.
Mobile station:
The MS shall be GPRS attached with ciphering enabled.
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
For this test case, NMS = NSS = 10.
Initiate unacknowledged data t... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.7 XID command with unrecognised type field | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.7.1 Conformance requirement | If a SABM or XID command with an invalid XID information field is received, then the SABM or XID command, respectively, shall be ignored.
If a SABM or XID command with unrecognised type field is received, then this parameter shall be ignored.
Reference
3GPP TS 04.64, subclause 8.5.3.3. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.7.2 Test purpose | To test the MS response to an XID command with an unrecognised type field. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.7.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
Send an XID frame from the SS with N201-U = 800 and another parameter with type = 15. Verify that the MS responds with an XID response. Verify that the MS sends UI frames with N201-U taking negotiated value.
Maximum duration of the test... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.8 XID Response with out of range values | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.8.1 Conformance requirement | If UA or XID response with an invalid XID information field is received, then the UA or XID response shall be ignored, the SABM or XID command shall be retransmitted, and the retransmission counter shall be incremented.
Reference
3GPP TS 04.64, subclause 8.5.3.3. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.8.2 Test purpose | To test the MS response to an XID response with the N201-I value out of range. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.8.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
Send an XID frame within SABM , from the MS with layer3 parameters. Respond from the SS with an XID, with N201-I = 1600. Verify that the MS ignores this response and resends the SABM with the XID command. Now accept the XID values recei... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2 SNDCP Tests | This clause contains the test case requirements for Subnetwork Dependent Convergence Protocol(SNDCP) procedures in the General Packet Radio Service (GPRS). |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.1 Default Conditions | - The MS default initial condition is that it is GPRS attached.
- Data and header compression are off.
The N-PDU size shall be more than the negotiated values of N201-U and N201-I so that segmentation at SNDCP is ensured. Unless stated otherwise, the default conditions shall apply.
If the MS sends an XID command with X... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2 Test cases | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.1 Data transfer | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.1.1 Mobile originated normal data transfer with LLC in acknowledged mode | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.1.1.1 Conformance requirement | The SNDCP entity shall initiate acknowledged data transmission only if the PDP context for the NSAPI identified in the SN-DATA.request has been activated and if acknowledged LLC operation has been established.
The N-PDU number in acknowledged mode is a number assigned to each N-PDU received by SNDCP through an SN-DATA.... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.1.2 Mobile originated normal data transfer with LLC in unacknowledged mode | 46.2.2.1.2.1 Conformance requirement
The SNDCP entity shall initiate unacknowledged data transmission only if the PDP context for the NSAPI identified in the SN-DATA.request has been activated. The SNDCP entity may initiate unacknowledged data transmission even if the acknowledged peer-to-peer operation is not establi... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.1.3 Usage of acknowledged mode for data transmission before and after PDP Context modification, on different SAPIs | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.1.3.1 Conformance Requirement | Upon reception of the SNSM-MODIFY.indication from the SM sublayer:
- the SNDCP entity shall, if necessary, establish the acknowledged peer-to-peer LLC operation for the indicated SAPI (the establishment criteria and procedure are described in subclause 6.2.1);
- the SNDCP entity shall also, if necessary, release the ac... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.1.3.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
PDP Context 11 is initiated from MS.
After the first N-PDU is correctly received in acknowledged mode, the last segment of the second N-PDU (N-PDU number=1) is not acked and a PDP context modification is initiated from SS to PDP context... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.1.4 Reset indication during unacknowledged mode | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.1.4.1 Conformance Requirement | Upon receipt of the LL-RESET.indication, the SNDCP layer shall:
- reset all SNDCP XID parameters to their default values;
- in the MS, for every NSAPI using unacknowledged peer-to-peer LLC operation, set the Send N-PDU number (unacknowledged) to 0.
Reference
3GPP TS 04.65, subclause 5.1.2.1. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.1.4.2 Test purpose | To verify that the MS resets the Send N-PDU number to 0 on link reset during an unacknowledged mode data transfer. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.1.4.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
PDP Context 8 is initiated from MS.
An XID command is sent with reset from SS during unacknowledged data transfer, after receiving N-PDU number 2 from MS. The next N-PDU number from MS shall be 0.
Maximum duration of the test
2 minutes.... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.1.5 Reset indication during acknowledged mode | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.1.5.1 Conformance Requirement | Upon receipt of the LL-RESET.indication, the SNDCP layer shall:
- reset all SNDCP XID parameters to their default values;
- for every NSAPI using acknowledged peer-to-peer LLC operation, enter the recovery state and suspend the transmission of SN-PDUs until an SNSM-SEQUENCE.indication primitive is received for the NSAP... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.1.5.3 Method of test | Initial conditions
Two cells , cell A and B need to be supported. B is in a routing area (in a new SGSN) and location area different from that of A. The power level of cell A shall be higher than that of cell B so that the MS selects cell A.
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
PDP Context 13 ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.1.6 Inter SGSN (with NAS container / new Routing Area / SGSN indicated Reset) PS Handover / Synchronized cell case / successful | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.1.6.1 Conformance Requirement | If during PS handover the MS is requested to perform a Reset of LLC layer parameters and layer‑3 parameters (see 3GPP TS 24.008 [8a]), the MS shall perform the actions described above and shall send the XID response on one of the active SAPIs once the PS handover procedure has been successfully completed.
If Reset of L... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.1.6.3 Method of test | Initial conditions
Cells A and B need to be supported. Cell B is in a routing area (in a new SGSN) and location area different from that of Cell A. The power level of Cell A shall be higher than that of Cell B so that the MS selects Cell A.
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
PDP Context 13 i... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.2 Segmentation | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.2.1 LLC link re-establishment on reception of SN-DATA PDU with F=0 in ack mode in the Receive First Segment state | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.2.1.1 Conformance Requirement | Receive First Segment state:
- If an SN-DATA PDU is received with the F bit set to 0, the SN-DATA PDU shall be discarded, and the acknowledged LLC operation shall be re-established for the SAPI used.
Reference
3GPP TS 04.65, subclause 6.7.4.1. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.2.1.2 Test purpose | To verify that the MS re-establishes the LLC SAPI on reception of an SN-DATA PDU with F=0 as the first segment in the acknowledged mode data transfer. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.2.1.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
PDP Context 13 is initiated from MS.
An acknowledged mode data transfer is started from SS with the first SN_DATA PDU with F=0.
Verify that the MS shall re-establish the LLC SAPI 11.
Maximum duration of the test
2 minutes.
Expected sequ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.2.2 LLC link re-establishment on receiving second segment with F=1 and with different PCOMP and DCOMP values in the acknowledged mode data transfer | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.2.2.1 Conformance Requirement | Receive Subsequent Segment state:
- If an SN-DATA PDU is received with the F bit set to 1, and if DCOMP, PCOMP or N-PDU number is different from those in the first segment, then the SN-DATA PDU and all previous segments belonging to the same N‑PDU shall be discarded, and the acknowledged LLC operation shall be re-estab... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.2.3 Single segment N-PDU from MS | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.2.3.1 Conformance Requirement | - The F bit in the SNDCP header shall be set to 1 for the first segment, and 0 for all subsequent segments. For unacknowledged peer-to-peer LLC operation, DCOMP and PCOMP shall be included in the header when the F bit is set to 1, and shall not be included when the F bit is set to 0. For acknowledged peer-to-peer LLC o... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.2.3.2 Test purpose | To verify that for a single segment N-PDU, the MS shall send the SN_UNITDATA PDU with F=1 and M=0 during unacknowledged data transfer. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.2.3.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
PDP Context 10 is initiated from MS.
An unacknowledged mode data transfer is started from MS for a data size less than N201-U. Verify that the MS sends the SN-UNITDATA PDU with M=0 and F=1.
Maximum duration of the test
2 minutes.
Expect... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.3 Link Release | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.3.1 LLC link release on receiving DM from the SS during link establishment | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.3.1.1 Conformance Requirement | If the originator of the establishment procedure receives an LL-RELEASE.indication with Cause "DM received", it shall inform the SM sub-layer using the SNSM-STATUS.request primitive with Cause "DM received". SM shall then deactivate all PDP contexts for that SAPI requiring acknowledged peer-to-peer LLC operation.
Refer... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.3.1.2 Test purpose | To verify that in MS, the LLC SAPI is released and the PDP context is deactivated on reception of DM response from SS during link establishment. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.3.1.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
PDP Context 13 is initiated from MS.
A DM response is sent from SS, after receiving a SABM from the MS for link establishment. The MS shall release the LLC SAPI 11 and the PDP context for the NSAPI shall be deactivated.
Maximum duration... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.4 XID negotiation | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.4.1 Response from MS on receiving XID request from the SS | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.4.1.1 Conformance Requirement | The XID negotiation is a one-step procedure; i.e., the initiating end proposes parameter values, and the responding end either accepts these or offers different values in their place according to the XID negotiation rules described in the present document; the rules limit the range of parameter values as well as the se... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.4.1.2 Test purpose | To verify that:
- the MS which does not support compression, responds with applicable NSAPI field with 0 for an XID request from the SS with some compression entity;
- the MS which supports compression responds with the applicable NSAPI field set to 1 for an XID request from the SS with some compression entity. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.4.1.3 Method of test | Initial conditions
-
Specific PICS statements:
- MS supporting compression has compression turned on (TSPC_AddInfo_GPRS_Data_Compr and/or TSPC_AddInfo_GPRS_Header_Compr).
- Support of GPRS header compression algorithm type RFC 1144 (TSPC_AddInfo_GPRS_Header_Compr_Type_RFC1144)
- Support of GPRS header compression algor... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.4.2 Response from MS on receiving an XID request from the SS with an unassigned entity number | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.2.2.4.2.1 Conformance Requirement | In the originating SNDCP XID block, if an unassigned entity number is included with the P bit set to 0, then the Applicable NSAPIs field in the response shall be set to 0.
Reference
3GPP TS 04.65, subclause 6.8.3. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.