hash stringlengths 32 32 | doc_id stringlengths 7 13 | section stringlengths 3 121 | content stringlengths 0 2.2M |
|---|---|---|---|
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5H.1.2.1 Spectrum emission mask for intra-band UL contiguous CA for UL MIMO | ...................... 1625 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5H.1.2.2 Additional spectrum emission mask for intra-band UL contiguous CA for UL MIMO | ..... 1627 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5H.1.2.3 NR ACLR for intra-band UL contiguous CA for UL MIMO | ............................................. 1628 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5H.1.3 Spurious emission for intra-band UL contiguous CA for UL MIMO | ...................................... 1631 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5H.1.3.0 Minimum conformance requirements | ................................................................................. 1631 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5H.1.3.1 General spurious emissions for intra-band UL contiguous CA for UL MIMO | .................. 1631 6.5H.1.3.2 Spurious emissions for UE co-existence for intra-band UL contiguous CA for UL MIMO ................................................................................................................................. 1632 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5H.1.3.3 Additional spurious emissions for intra-band UL contiguous CA for UL MIMO | .............. 1634 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5H.1.4 Transmit intermodulation for intra-band UL contiguous CA for UL MIMO | ........................... 1636 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5H.2 | 1638 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5H.3 Output RF spectrum emissions for inter-band UL CA with UL MIMO | ........................................ 1638 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5H.3.1 Occupied bandwidth for inter-band UL CA with UL MIMO | .................................................. 1638 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5H.3.2 Out of band emission for inter-band UL CA with UL MIMO | ................................................. 1638 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5H.3.2.0 Minimum conformance requirements | ................................................................................. 1638 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5H.3.2.1 Spectrum emission mask for inter-band UL CA with UL MIMO | ...................................... 1638 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5H.3.2.2 Additional spectrum emission mask for inter-band UL CA with UL MIMO | ..................... 1639 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5H.3.2.3 Adjacent channel leakage ratio for inter-band UL CA with UL MIMO | ............................. 1639 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5H.3.3 Spurious emission for inter-band UL CA with UL MIMO | ...................................................... 1640 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5H.3.3.0 Minimum conformance requirements | ................................................................................. 1640 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5H.3.3.1 General spurious emissions for inter-band UL CA with UL MIMO | .................................. 1640 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5H.3.3.2 Spurious emissions for UE co-existence for inter-band UL CA with UL MIMO | .............. 1642 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5H.3.4 Transmit intermodulation for inter-band UL CA with UL MIMO | ........................................... 1643 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5J Output RF spectrum emissions for ATG | ............................................................................................. 1643 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5J.0 General | ........................................................................................................................................... 1643 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5J.1 Occupied bandwidth for ATG | ....................................................................................................... 1644 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5J.2 Out of band emission for ATG | ...................................................................................................... 1646 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5J.2.1 General | ..................................................................................................................................... 1646 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5J.2.2 Spectrum emission mask for ATG | ........................................................................................... 1646 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5J.3 Spurious emissions for ATG | .......................................................................................................... 1648 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5J.3.0 General | ..................................................................................................................................... 1648 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5J.3.1 General spurious emissions for ATG | ....................................................................................... 1648 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5K Output RF spectrum emissions for Aerial UE | ..................................................................................... 1650 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5K.1 Occupied bandwidth for Aerial UE | ............................................................................................... 1650 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5K.2 Out of band emission for Aerial UE | .............................................................................................. 1650 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5K.3 Spurious emissions for Aerial UE | .................................................................................................. 1650 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5K.3.1 General spurious emissions | ...................................................................................................... 1650 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5K.3.2 Spurious emissions for UE co-existence | .................................................................................. 1650 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5K.3.3 Additional spurious emissions | ................................................................................................. 1650 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5L Output RF spectrum emissions for CA with Tx Diversity | .................................................................. 1655 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5L.1 Void | ............................................................................................................................................... 1655 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5L.2 Void | ............................................................................................................................................... 1655 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5L.3 Output RF spectrum emissions for inter-band UL CA with Tx Diversity | ..................................... 1655 3GPP TS 38.521-1 version 19.2.0 Release 19 17 ETSI TS 138 521-1 V19.2.0 (2025-11) ETSI |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5L.3.1 Occupied bandwidth for inter-band UL CA with Tx Diversity | ................................................ 1655 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5L.3.2 Out of band emission for inter-band UL CA with Tx Diversity | .............................................. 1655 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5L.3.2.0 Minimum conformance requirements | ................................................................................. 1655 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5L.3.2.1 Spectrum emission mask for inter-band UL CA with Tx Diversity | ................................... 1656 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5L.3.2.2 Additional spectrum emission mask for inter-band UL CA with Tx Diversity | .................. 1656 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5L.3.2.3 Adjacent channel leakage ratio for inter-band UL CA with Tx Diversity | .......................... 1656 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5L.3.3 Spurious emission for inter-band UL CA with Tx Diversity | ................................................... 1657 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5L.3.3.0 Minimum conformance requirements | ................................................................................. 1657 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5L.3.3.1 General spurious emissions for inter-band UL CA with Tx Diversity | ............................... 1657 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5L.3.3.2 Spurious emissions for UE co-existence for inter-band UL CA with Tx Diversity | ........... 1659 |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.5L.3.4 Transmit intermodulation for inter-band UL CA with Tx Diversity | ........................................ 1660 Annex A (normative): Measurement channels ...................................................................... 2163 A.1 General ....................................................................................................................................... 2163 A.2... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.1 General | ................................................................................................................................................ 2209 A.7.2 FRC for V2X receiver requirements for QPSK ................................................................................... 2209 A.7.3 FRC for maximum input leve... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.2E.3.1D UE additional maximum output power reduction for V2X / non-concurrent operation / SL-MIMO | 6.2E.3.1D.1 Test purpose Same test purpose as in 6.2E.3.1. 6.2E.3.1D.2 Test applicability This test case applies to all types of UE release 16 and forward that support NR V2X sidelink communication and SL-MIMO. NOTE: Test execution is not necessary if TS 38.521-1 6.5E.2.3.1D are executed. 6.2E.3.1D.3 Minimum conformanc... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.3A.3.5 Time mask for switching between two uplink bands with two transmit antenna connectors (3UL CA) | 6.3A.3.5.1 Test purpose To verify that the time mask for switching between two uplink bands with two transmitter connectors meets the requirements given in 6.3A.3.0.3.5. The time mask for switching between NR UL carrier 1 in band A, which capable of two transmit antenna connectors, and NR UL carrier 2 and carrier 3 in ... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.3C.3.3 General transmit ON/OFF time mask for switching between two uplink carriers with two transmit antenna connectors | 6.3C.3.3.1 Test purpose To verify that the time mask for switching between two uplink carriers with two transmit antenna connectors meets the requirements given in 6.3C.3.0.3. The time mask for switching between two uplink carriers with two transmit antenna connectors defines the transient period(s) allowed between an ... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 6.3C.3.5 General transmit ON/OFF time mask for switching between two uplink bands with two transmit antenna connectors | 6.3C.3.5.1 Test purpose To verify that the time mask for switching between one uplink band with two transmit antenna connectors and one uplink band with two transmit antenna connectors meets the requirements given in 6.3C.3.0.4 when the capability uplinkTxSwitchingPeriod2T2T is present. 6.3C.3.5.2 Test applicability Th... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7 Receiver characteristics | TBD 7.1 General Unless otherwise stated the receiver characteristics are specified at the antenna connector(s) of the UE. For UE(s) with an integral antenna only, a reference antenna(s) with a gain of 0 dBi is assumed for each antenna port(s). UE with an integral antenna(s) may be taken into account by converting these... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.1A General | The minimum requirements for band combinations including Band n41 also apply for the corresponding band combinations with Band n90 replacing Band n41 but with otherwise identical parameters. For brevity the said band combinations with Band n90 are not listed in the tables below but are covered by this specification. Th... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.1I General | For a (e)Redcap UE the requirements in Section 7 shall be verified with the channel bandwidth up to 20MHz and REFSENS specified in clause 7.3I. |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.1J General for ATG | Unless otherwise stated, the receiver characteristics are specified at the antenna connector(s) of the ATG UE with one or multiple omni-directional antenna(s) or at the transceiver array boundary (TAB) connectors of the ATG UE with the antenna array. The definition about transceiver array boundary (TAB) is specified in... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.2 Diversity characteristics | The UE is required to be equipped with a minimum of two Rx antenna ports in all operating bands except for the bands n7, n38, n41, n77, n78, n79, n104 where the UE is required to be equipped with a minimum of four Rx antenna ports. An exception is allowed for two Rx vehicular UE to be equipped with a minimum of two Rx ... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.2J Diversity characteristics for ATG | The ATG UE is required to be equipped with a minimum of two Rx antenna ports in all operating bands. ATG UE is required optionally to be equipped with four Rx antenna ports. |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3 Reference sensitivity | |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3.1 General | The reference sensitivity power level REFSENS is the minimum mean power applied to each one of the UE antenna ports for all UE categories, at which the throughput shall meet or exceed the requirements for the specified reference measurement channel. In later clauses of Clause 7 where the value of REFSENS is used as a r... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3.2 Reference sensitivity power level | Editor’s note: The following aspects are either missing or not yet determined: - MU and TT for f>6GHz are working assumption based on analysis of single TE vendor. Values will be revisited once analysis from other TE vendors is available. 7.3.2.1 Test purpose The test purpose is to verify the ability of the UE to recei... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3A Reference sensitivity for CA | Editor's Note: This clause is incomplete. The following aspects are either missing or not yet determined: Test requirement table for 2DL/2UL is not complete. - Reference sensitivity power level for 4DL_CA and 5DL_CA are FFS. - Test description for exceptional cases are incomplete. |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3A.0 Minimum conformance requirements | |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3A.0.1 General | The reference sensitivity power level REFSENS is the minimum mean power applied to each one of the UE antenna ports for all UE categories, at which the throughput shall meet or exceed the requirements for the specified reference measurement channel. For operations with 4 Rx or 8 Rx antenna ports, the MSD in the applica... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3A.0.2 Reference sensitivity power level for CA | |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3A.0.2.1 Reference sensitivity power level for Intra-band contiguous CA | For intra-band contiguous carrier aggregation, the throughput of each component carrier shall be ≥ 95% of the maximum throughput of the reference measurement channels as specified in Annex A.2.2.2, A.2.3.2, A.3.2, and A.3.3 (with one sided dynamic OCNG Pattern OP.1 FDD/TDD for the DL-signal as described in Annex A.5.1.... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3A.0.2.2 Reference sensitivity power level for Intra-band non-contiguous CA | For intra-band non-contiguous carrier aggregation with one uplink carrier and two or more downlink sub-blocks, throughput of each downlink component carrier shall be ≥ 95% of the maximum throughput of the reference measurement channels as specified in Annexes A.2.2, A.2.3 and A.3.2 (with one sided dynamic OCNG Pattern ... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3A.0.2.3 Reference sensitivity power level for Inter-band CA | For inter-band carrier aggregation with one component carrier per operating band and the uplink assigned to one NR band the throughput shall be ≥ 95% of the maximum throughput of the reference measurement channels as specified in Annexes A.2.2.2, A.2.3.2, A.3.2, and A.3.3 (with one sided dynamic OCNG Pattern OP.1 FDD/T... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3A.0.2.4 Void | 3GPP TS 38.521-1 version 19.2.0 Release 19 1700 ETSI TS 138 521-1 V19.2.0 (2025-11) ETSI 7.3A.0.3 ΔRIB,c for CA |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3A.0.3.1 General | For a UE supporting a CA configuration, the ΔRIB,c applies for both SC and CA operation. 7.3A.0.3.2 ΔRIB,c for Inter-band CA For the UE which supports inter-band carrier aggregation, the minimum requirement for reference sensitivity in subclause 7.3A.0 shall be increased by the amount given by ΔRIB,c defined in subclau... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3A.0.4 Reference sensitivity exceptions due to UL harmonic interference for CA | Sensitivity degradation is allowed for different combinations of UL configurations and DL channel bandwidths if a band in frequency range 1 is impacted by UL harmonic interference from another band which belongs to NR band in frequency range 1 of the same downlink CA configuration. Reference sensitivity exceptions and ... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3A.0.6 Reference sensitivity exceptions due to cross band isolation for CA | Sensitivity degradation is allowed for a band if it is impacted by UL of another band part which belongs to NR band of the same NR CA configuration due to cross band isolation issues. The reference sensitivity degradation for the victim band due to cross band isolation is specified only for the specific uplink and down... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3A.1 Reference sensitivity power level for 2DL CA without exception | 7.3A.1.1 Test purpose To verify the ability of UE that support CA to receive data with a given average throughput for a specified reference measurement channel, under conditions of low signal level, ideal propagation and no added noise when no CA exceptions are allowed and single carrier requirements apply. A UE unable... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3A.2 Reference sensitivity power level for 3DL CA without exceptions | 7.3A.2.1 Test purpose To verify the ability of UE that support CA to receive data with a given average throughput for a specified reference measurement channel, under conditions of low signal level, ideal propagation and no added noise. A UE unable to meet the throughput requirement under these conditions will decrease... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3A.3 Reference sensitivity power level for 4DL CA | NOTE: Intraband contiguous 4DL CA is FFS 7.3A.3.1 Test purpose To verify the ability of UE that support CA to receive data with a given average throughput for a specified reference measurement channel, under conditions of low signal level, ideal propagation and no added noise. A UE unable to meet the throughput require... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3A.4 Reference sensitivity power level for 5DL CA | FFS |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3B Reference sensitivity for NR-DC | For inter-band NR-DC configurations, the reference sensitivity for the corresponding inter-band CA configuration as specified in clause 7.3A applies. Note: For NR-DC testing, replace CA by NR-DC, PCC by PCell, and SCC by PSCell in clause 7.3A. |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3C Reference sensitivity for SUL | |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3C.0 Minimum conformance requirements | |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3C.0.1 General | The reference sensitivity power level REFSENS is the minimum mean power applied to each one of the UE antenna ports for all UE categories, at which the throughput shall meet or exceed the requirements for the specified reference measurement channel. For operations with 4 Rx or 8 Rx antenna ports, the MSD in the applica... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3C.0.2 Minimum conformance requirements for Reference sensitivity power level | For SUL operation, the reference receive sensitivity (REFSENS) requirement for downlink bands specified in Table 7.3.2.3-1a, Table 7.3.2.3-1b, Table 7.3.2.3-1c, Table 7.3.2.3-1d and 7.3.2.3-2, and Table 7.3.2.3-2a shall be met for an uplink transmission bandwidth less than or equal to that specified in Table 7.3.2.3-1 ... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3C.1 General | The reference sensitivity power level REFSENS is the minimum mean power applied to each one of the UE antenna ports for all UE categories, at which the throughput shall meet or exceed the requirements for the specified reference measurement channel. For reference sensitivity exception test points where the specified ca... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3C.2 Reference sensitivity power level for SUL | Editor’s Note: The following aspects are either missing or not yet determined: - Exceptional test points for configurations except SUL_n78-n80 and SUL_n78-n81 is FFS 7.3C.2.1 Test purpose The test purpose is to verify the ability of the UE to receive data with a given average throughput for a specified reference measur... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3C.3 Reference sensitivity power level for SUL with 2 DL CA | Editor’s Note: - No test points defined for Reference sensitivity power level testing for SUL with DL CA. This test case is covered by 7.3.2 and 7.3C.2. 7.3C.3.1 Test purpose The test purpose is to verify the ability of the UE to receive data with a given average throughput for a specified reference measurement channel... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3C.4 Reference sensitivity power level for SUL with 3 DL CA | Editor’s Note: - No test points defined for Reference sensitivity power level testing for SUL with DL CA. This test case is covered by 7.3A.1 and 7.3C.2. 7.3C.4.1 Test purpose The test purpose is to verify the ability of the UE to receive data with a given average throughput for a specified reference measurement channe... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3D Reference sensitivity for UL MIMO | |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3D.1 General | For UE with two or four transmitter antenna connectors in closed-loop spatial multiplexing scheme, the minimum requirements specified in subclause 7.3 shall be met with the UL MIMO configurations described in clause 6.2D.1. For UL MIMO, the parameter PUMAX is the total transmitter power over the total transmits power o... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3D.2 Reference sensitivity power level for UL MIMO | 7.3D.2.1 Test purpose The test purpose is to verify the ability of the UE to receive data with a given average throughput for a specified reference measurement channel, under conditions of low signal level, ideal propagation and no added noise. 7.3D.2.2 Test applicability This test case applies to all types of NR UE re... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3E Reference sensitivity for V2X | |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3E.1 Minimum conformance requirements | 7.3E.1.1 General The reference sensitivity power level PREFSENS_V2X is the minimum mean power applied to each one of the UE antenna ports for V2X UE, at which the throughput shall meet or exceed the requirements for the specified reference measurement channel. 7.3E.1.2 Minimum requirements When UE is configured for NR ... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3E.2 Reference sensitivity for V2X / non-concurrent operation | 7.3E.2.1 Test purpose The test purpose is to verify the ability of the UE to receive V2X physical channel data with a given average throughput for a specified reference measurement channel, under conditions of low signal level, ideal propagation and no added noise. 7.3E.2.2 Test applicability This test case applies to ... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3E.3 Reference sensitivity for V2X / Concurrent operation | Editor’s Note: This clause is incomplete for configurations with reference sensitivity exception. The following aspects are not yet determined: - The TP analysis, connection diagram and test requirement are FFS. 7.3E.3.1 Test purpose The test purpose is to verify the ability of the UE to receive V2X and NR physical cha... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3F Reference sensitivity for shared spectrum channel access | |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3F.1 General | The reference sensitivity power level REFSENS is the minimum mean power applied to each one of the UE antenna ports, at which the throughput shall meet or exceed the requirements for the specified reference measurement channel. In later clauses of Clause 7 where the value of REFSENS is used as a reference to set the co... |
47427c363b8cb3a33a525cec081286b5 | 138 521-1 | 7.3F.2 Reference sensitivity power level | Editor’s Note: The following aspects are not yet determined: - MU and TT for >6GHz (band n96) are working assumption based on analysis of single TE vendor. Values will be revisited once analysis from other TE vendors is available. 7.3F.2.1 Test purpose The test purpose is to verify the ability of the UE to receive data... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.