hash stringlengths 32 32 | doc_id stringlengths 7 13 | section stringlengths 3 121 | content stringlengths 0 2.2M |
|---|---|---|---|
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.6.4.5 Update RF technology settings | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.6.4.5.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clause 9.4.5. There are no conformance requirements for the terminal for the referenced clause. |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.6.4.6 Identity check | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.6.4.6.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clause 9.4.6. RQ9.110 If the lower identity check fails, the host controller shall not respond to the external contactless reader with any parameter from the card emulation registries related to the UICC host. NOTE: Development of test cases for above listed RQs is FFS. |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7 Contactless reader | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.1 Overview | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.1.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clause 10.1. RQ10.1 The host controller has one reader RF gate for each RF technology it supports. RQ10.2 The CLF shall handle the RF layers of the communications as defined in ISO/IEC 14443-2 [5]. RQ10.3 The anti-collision and activation as defined in ISO/IEC 14443-3 [6] shall be handle... |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.2 Reader RF gates | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.2.1 Overview | Reference: ETSI TS 102 622 [1], clause 10.2.1. There are no conformance requirements for the terminal for the referenced clause. |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.2.2 Command | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.2.2.1 WR_XCHG_DATA | 5.7.2.2.1.1 Conformance requirements Reference: ETSI TS 102 622 [1], clause 10.2.2.1. RQ10.6 If b5 of the CTR field of WR_XCHG_DATA is set to zero, application level time-out is deactivated. RQ10.7 If b5 of the CTR field of WR_XCHG_DATA is set to one, then b4 to b1 is a time-out value which shall use to calculate the a... |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.2.3 Registries | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.2.3.1 Type A reader RF gate | 5.7.2.3.1.1 Conformance requirements Reference: ETSI TS 102 622 [1], clause 10.2.3.1. RQ10.11 10.2.3.1 Registry parameters which are in the range reserved for usage by ETSI TS 102 622 [1] but which are not defined in ETSI TS 102 622 [1] shall not be present in the registry. RQ10.12 10.2.3.1 The registry is not persiste... |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.2.3.2 Type B reader RF gate | 5.7.2.3.2.1 Conformance requirements Reference: ETSI TS 102 622 [1], clause 10.2.2.1and 10.2.3.2. RQ10.28 10.2.3.2 Registry parameters which are in the range reserved for usage by ETSI TS 102 622 [1] but which are not defined in ETSI TS 102 622 [1] shall not be present in the registry. RQ10.29 10.2.3.2 The registry is ... |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.2.4 Events and subclauses | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.2.4.1 Events | 5.7.2.4.1.1 Conformance requirements Reference: ETSI TS 102 622 [1], clause 10.2.4. RQ10.41 The reader RF gates shall support the EVT_READER_REQUESTED and EVT_END_OPERATION events. ETSI ETSI TS 102 695-3 V13.0.0 (2019-04) 58 Release 13 |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.2.4.2 EVT_READER_REQUESTED | 5.7.2.4.2.1 Conformance requirements Reference: ETSI TS 102 622 [1], clause 10.2.4.1. RQ10.42 On receiving the EVT_READER_REQUESTED event, the CLF shall activate the RF polling (turn on the RF carrier). RQ10.43 The CLF shall accept EVT_READER_REQUESTED event on any open pipe of any reader RF gate. |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.2.4.3 EVT_END_OPERATION | 5.7.2.4.3.1 Conformance requirements Reference: ETSI TS 102 622 [1], clause 10.2.4.2. RQ10.58 Upon reception of the event EVT_END_OPERATION from a host the CLF controller shall turn the RF field OFF if the EVT_TARGET_DISCOVERED has been previously sent to that specific host. |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.2.4.4 EVT_READER_STATUS | 5.7.2.4.4.1 Conformance requirements Reference: ETSI TS 102 622 [1], clause 10.2.4.2. RQ10.81 Rel-11 upwards The CLF shall send this event once after the reader status event enable bit (b1) in the STATUS_EVENT_EN is changed to 1 RQ10.82 Rel-11 upwards The CLF shall send this event as long as the reader status event ena... |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.2.5 Responses | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.2.5.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clause 10.2.5. RQ10.44 If command WR_XCHG_DATA is successful, response shall be ANY_OK. RQ10.45 If command WR_XCHG_DATA is rejected and/or not completed, response shall be ANY_E_OK. RQ10.46 If Application level time-out occurred, the response shall be ANY_E_TIMEOUT. RQ10.47 If Target has... |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.3 Reader application gates | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.3.1 Overview | Reference: ETSI TS 102 622 [1], clause 10.3.1. There are no conformance requirements for the terminal for the referenced clause. |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.3.2 Command | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.3.2.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clause 10.3.2. There are no conformance requirements for the terminal for the referenced clause. |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.3.3 Registry | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.3.3.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clause 10.3.3. There are no conformance requirements for the terminal for the referenced clause. |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.3.4 Events and subclauses | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.3.4.1 Events | 5.7.3.4.1.1 Conformance requirements Reference: ETSI TS 102 622 [1], clause 10.3.4. There are no conformance requirements for the terminal for the referenced clause. |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.3.4.2 EVT_TARGET_DISCOVERED | 5.7.3.4.2.1 Conformance requirements Reference: ETSI TS 102 622 [1], clause 10.3.4.1. RQ10.48 The existence of an RF target in the field of the activated RF technology shall be signalled to the reader application gate by EVT_TARGET_DISCOVERED event. RQ10.49 If there is a single target in the reader field and the activa... |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.4 Procedures | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.4.1 Use of contactless reader application | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.4.1.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clause 10.4.1. RQ10.51 On receiving the EVT_READER_REQUESTED event, the CLF shall enable the RF polling. RQ10.52 Once RF polling is enabled, the CLF shall start the detecting of a target according to all reader RF gates of the host that have an open pipe. RQ10.53 When a target has been d... |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.4.2 Contactless reader not available | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.4.2.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clause 10.4.2 RQ10.90 Rel-11 upwards After receiving ANY_GET_PARAMETER(OPERATING_STATUS), if the reader is not available the CLF shall report to the UICC that the reader is not available in the response ANY_OK (not available) as specified in RQ10.65 and RQ10.75. RQ10.91 Rel-11 upwards Af... |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.4.3 Error management | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.7.4.3.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clause 10.4.3 RQ10.93 Rel-11 upwards If the CLF detected a non-recoverable RF error after WR_XCHG_DATA reception and the reader RF gate replies in sending the response ANY_OK with parameter "Error indicator" set to '01'. RQ10.94 Rel-11 upwards The CLF shall be able to restart the reader ... |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.8 Connectivity | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.8.1 Overview | Reference: ETSI TS 102 622 [1], clause 11.1. There are no conformance requirements for the terminal host for the referenced clause. |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.8.2 Connectivity gate and subclauses | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.8.2.1 Connectivity gate | Reference: ETSI TS 102 622 [1], clause 11.2. RQ11.8 Rel-11 upwards As destination gate, the connectivity gate shall accept at least one pipe from each host in its WHITELIST. NOTE: Development of test cases for RQ11.8 is FFS. |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.8.2.2 Commands | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.8.2.2.1 PRO_HOST_REQUEST | 5.8.2.2.1.1 Conformance requirements Reference: ETSI TS 102 622 [1], clause 11.2.1.1. RQ11.1 When the terminal host receives an PRO_HOST_REQUEST, it shall attempt to activate every host in the list of host identifiers during the Activation Duration. RQ11.2 If every requested host has successfully been activated, the te... |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.8.2.3 Events and subclauses | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.8.2.3.1 Events | Reference: ETSI TS 102 622 [1], clause 11.2.2. There are no conformance requirements for the terminal host for the referenced clause. |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.8.2.3.2 EVT_CONNECTIVITY | 5.8.2.3.2.1 Conformance requirements Reference: ETSI TS 102 622 [1], clause 11.2.2.1. RQ11.4 When the terminal host receives an EVT_CONNECTIVITY, it shall send a "HCI connectivity event" as defined in ETSI TS 102 223 [3]. NOTE: Development of test cases for above listed RQs is FFS. |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.8.2.3.3 Void | ETSI ETSI TS 102 695-3 V13.0.0 (2019-04) 62 Release 13 |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.8.2.3.4 EVT_OPERATION_ENDED | 5.8.2.3.4.1 Conformance requirements Reference: ETSI TS 102 622 [1], clause 11.2.2.3. There are no conformance requirements for the terminal host for the referenced clause. |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.8.2.3.5 EVT_TRANSACTION | 5.8.2.3.5.1 Conformance requirements Reference: ETSI TS 102 622 [1], clause 11.2.2.4. RQ11.5 When the terminal host receives an EVT_TRANSACTION, it shall attempt to launch an application associated to an NFC application in a UICC host identified by the AID. RQ11.17 Rel-12 upwards The terminal host shall make the PARAME... |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.8.2.4 Registry | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.8.2.4.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clause 11.2.3. RQ11.6 Registry parameters which are in the range reserved for usage by ETSI TS 102 622 [1] but which are not defined in ETSI TS 102 622 [1] shall not be present in the registry. RQ11.9 Rel-12 upwards The terminal host shall use a default value for UI_STATE of '00'. RQ11.1... |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.8.3 Connectivity application gate and subclauses | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.8.3.1 Connectivity application gate | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.8.3.1.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clause 11.3. There are no conformance requirements for the terminal host for the referenced clause. ETSI ETSI TS 102 695-3 V13.0.0 (2019-04) 63 Release 13 |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.8.3.2 Commands | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.8.3.2.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clause 11.3.1. There are no conformance requirements for the terminal host for the referenced clause. |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.8.3.3 Events and subclauses | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.8.3.3.1 Events | 5.8.3.3.1.1 Conformance requirements Reference: ETSI TS 102 622 [1], clause 11.3.2. There are no conformance requirements for the terminal host for the referenced clause. |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.8.3.3.2 EVT_STANDBY | 5.8.3.3.2.1 Conformance requirements Reference: ETSI TS 102 622 [1], clause 11.3.2.1. RQ11.7 When the terminal host send EVT_STANDBY, it shall not contain parameters. NOTE: Development of test cases for above listed RQs is FFS. |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.8.3.4 Registry | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.8.3.4.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clause 11.3.3. There are no conformance requirements for the terminal host for the referenced clause. |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.8.4 Procedures | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.8.4.1 Use of connectivity gate | Reference: ETSI TS 102 622 [1], clause 11.4.1. There are no conformance requirements for the terminal host for the referenced clause. |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.9 APDU Transport | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.9.1 Server APDU host (APDU gate) | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.9.1.1 General | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.9.1.1.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clauses 12.1, 12.2 and 12.3. ETSI ETSI TS 102 695-3 V13.0.0 (2019-04) 64 Release 13 RQ12.1 12.1 Rel-12 upwards A client APDU host shall be able to create a pipe to the APDU gate of a server APDU host only if the client APDU host is included in the WHITELIST of the server APDU host. RQ12.... |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.9.1.2 Commands | Reference: ETSI TS 102 622 [1], clause 12.2.1. There are no conformance requirements for the terminal for the referenced clause. |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.9.1.3 Events | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.9.1.3.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clauses 12.2.2 and subclauses, 12.3.2 and subclauses. RQ12.5 12.2.2 Rel-12 upwards The APDU gate shall support the events listed in table 55 defined in ETSI TS 102 622 [1]. RQ12.6 12.2.2.2 Rel-12 upwards Upon reception of EVT_ABORT the server APDU host shall reset the state of the APDU g... |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.9.1.4 Registry | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.9.1.4.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clause 12.2.3. RQ12.18 Rel-12 upwards The registry shall be persistent. RQ12.19 Rel-12 upwards The host controller shall apply the access condition of RO for MAX_C-APDU_SIZE. RQ12.20 Rel-12 upwards The host controller shall apply the access condition of RO for MAX_WAIT_TIME. NOTE: Develo... |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.9.1.5 State diagram for the APDU gate | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.9.1.5.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clauses 12.4. Extraction of requirements for this clause is FFS. |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.9.2 Client APDU host (APDU application gate) | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.9.2.1 General | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.9.2.1.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clauses 12.1 and 12.3. RQ12.21 12.1 Rel-12 upwards A client APDU host shall not create more than one pipe to the APDU gate of a server APDU host. RQ12.22 12.3 Rel-12 upwards The APDU application gate of a client APDU host shall support the generic gate commands and events as defined in c... |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.9.2.2 Commands | Reference: ETSI TS 102 622 [1], clause 12.3.1. There are no conformance requirements for the terminal for the referenced clause. |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.9.2.3 Events | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.9.2.3.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clauses 12.2.2 and subclauses, 12.3.2 and subclauses ETSI ETSI TS 102 695-3 V13.0.0 (2019-04) 66 Release 13 RQ12.23 12.3.2 Rel-12 upwards The APDU application gate support the events listed in table 58 defined in ETSI TS 102 622 [1]. RQ12.24 12.2.2.1 Rel-12 upwards The event EVT_C-APDU s... |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.9.2.3.3 Test case 2: APDU command processing after reboot | 5.9.2.3.3.1 Test execution The test procedure shall be executed once for each of following parameters in step 3: • EVT_ATR delay = 15 ms. • EVT_ATR delay = 95 ms. There are no test case-specific parameters for this test case. 5.9.2.3.3.2 Initial conditions • Conditions of TRx are met. • MAX_WAIT_TIME is set to '1000' a... |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.9.2.4 Registry | Reference: ETSI TS 102 622 [1], clause 12.3.3. There are no conformance requirements for the terminal for the referenced clause. |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.9.2.5 State diagram for the APDU gate | |
6760801549fcce1efd9b24fa418f3463 | 102 695-3 | 5.9.2.5.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clauses 12.4. Extraction of requirements for this clause is FFS. ETSI ETSI TS 102 695-3 V13.0.0 (2019-04) 68 Release 13 Annex A (informative): Bibliography • ETSI TS 101 220: "Smart Cards; ETSI numbering system for telecommunication application providers". ETSI ETSI TS 102 695-3 V13.0.0 ... |
5c0e840ed8eb296c9207a0bf08691fa1 | 102 706-2 | 1 Scope | The present document covers the following radio access technology: • LTE. The methodology described in the present document is to measure base station dynamic energy efficiency. Within the present document, it is referred to as dynamic measurement. The results based on dynamic measurements of the BS provide energy effi... |
5c0e840ed8eb296c9207a0bf08691fa1 | 102 706-2 | 2 References | |
5c0e840ed8eb296c9207a0bf08691fa1 | 102 706-2 | 2.1 Normative references | References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which a... |
5c0e840ed8eb296c9207a0bf08691fa1 | 102 706-2 | 2.2 Informative references | References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks i... |
5c0e840ed8eb296c9207a0bf08691fa1 | 102 706-2 | 3 Definition of terms, symbols and abbreviations | |
5c0e840ed8eb296c9207a0bf08691fa1 | 102 706-2 | 3.1 Terms | For the purposes of the present document, the following terms apply: Base Station (BS): radio access network component which serves one or more radio cells and interfaces the user terminal (through air interface) and a wireless network infrastructure BS test control unit: unit which can be used to control and manage BS... |
5c0e840ed8eb296c9207a0bf08691fa1 | 102 706-2 | 3.2 Symbols | Void. |
5c0e840ed8eb296c9207a0bf08691fa1 | 102 706-2 | 3.3 Abbreviations | For the purposes of the present document, the following abbreviations apply: AC Alternating Current BH Busy Hour BS Base Station BSC Base Station Controller ETSI ETSI TS 102 706-2 V1.7.1 (2024-07) 10 BSEE Base Station Energy Efficiency BTS Base Transceiver Station BW Bandwidth CCE Control Channel Element DC Direct Curr... |
5c0e840ed8eb296c9207a0bf08691fa1 | 102 706-2 | 4 Assessment method | The assessment method is covering the BS equipment dynamic energy efficiency for which the present document defines reference BS equipment configurations and reference load levels to be used when measuring BS energy efficiency. The assessment procedure contains the following tasks: 1) Identification of equipment under ... |
5c0e840ed8eb296c9207a0bf08691fa1 | 102 706-2 | 5.1 Reference configurations | Reference configurations are defined for LTE in Annex B. These configurations include integrated and distributed BS, mast head amplifiers, remote radio heads, RF feeder cables, number of carriers, number of sectors, power range per sector, frequency range, diversity, MIMO. The BS shall be tested with its intended comme... |
5c0e840ed8eb296c9207a0bf08691fa1 | 102 706-2 | 5.2 Measurement and test equipment requirements | The measurement of the power consumption shall be performed by either measuring the power supply voltage and true effective current in parallel and calculate the resulting power consumption (applicable only for DC) or with a wattmeter (applicable for both AC and DC). The measurements can be performed by a variety of me... |
5c0e840ed8eb296c9207a0bf08691fa1 | 102 706-2 | 5.3 BS Configuration | The BS shall be tested under normal test conditions according to the information accompanying the equipment. The BS, test configuration and mode of operation (baseband, control and RF part of the BS as well as the software and firmware) shall represent the normal intended use and shall be recorded in the test report. T... |
5c0e840ed8eb296c9207a0bf08691fa1 | 102 706-2 | 5.4 Transmit Signal and RF output power | The maximum RF transmit power that the base station under test is capable of shall be reported. The base station under test shall control the RF transmit signal to fulfil the traffic profiles as listed in Annex B. The power amplifier(s) of the BS shall support the same crest factor (peak to average ratio) and back-off ... |
5c0e840ed8eb296c9207a0bf08691fa1 | 102 706-2 | 5.5 UE Emulator requirements and settings | UE power consumption is not considered in the present document. However, UE category and performance has a significant impact on the base station energy efficiency. To assess energy efficiency of the BS, the UE capabilities represented by the UE emulator shall be used as follows: • The UE emulator shall provide the tot... |
5c0e840ed8eb296c9207a0bf08691fa1 | 102 706-2 | 5.6 Environmental conditions | For the BS energy efficiency measurements, the environmental conditions under which the BS shall be tested are defined as follows. Table 1: BS environmental conditions Condition Minimum Maximum Barometric pressure 86 kPa (860 mbar) 106 kPa (1 060 mbar) Relative Humidity 20 % 85 % Vibration Negligible Temperature +25 °C... |
5c0e840ed8eb296c9207a0bf08691fa1 | 102 706-2 | 5.7 Power supply | For measurements of the BS power consumption the following operating voltage value shall be used (for non-standard power supply voltages one shall use the nominal equipment operating voltage with ±2,5 % tolerance). Nominal value and operating value for AC testing shall be according to ETSI EN 300 132-1 [2] and for DC t... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.