hash stringlengths 32 32 | doc_id stringlengths 7 13 | section stringlengths 3 121 | content stringlengths 0 2.2M |
|---|---|---|---|
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.5.4.2.1 Test execution | There are no test case-specific parameters for this test case. |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.5.4.2.2 Initial conditions | • The last value of SESSION_IDENTITY in the host controller's registry is not 'FFFFFFFFFFFFFFFF'. • A pipe (PIPE_ID_MAN) has previously been created to the host controller's identity management gate. • The host simulator is currently powered down. • PIPE1 needs to be open. |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.5.4.2.3 Test procedure | Step Direction Description RQ 1 HS Change the host configuration such that the lower layer identity check mechanism will fail. 2 User HCUT Trigger the host controller to power up and to activate the lower layer. 3 HCUT HS Power up and activate the lower layer. 4 HS HCUT Send ANY_OPEN_PIPE on PIPE0. 5 HCUT HS Se... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.5.4.3 Test case 2: inhibited state, followed by subsequent successful identity check | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.5.4.3.1 Test execution | There are no test case-specific parameters for this test case. |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.5.4.3.2 Initial conditions | • The last value of SESSION_IDENTITY in the host controller's registry is not 'FFFFFFFFFFFFFFFF'. • A pipe (PIPE_LOOP_BACK) has previously been created to the host controller's loop back gate. • The host simulator is currently powered down. ETSI ETSI TS 102 695-1 V13.0.0 (2019-04) 49 Release 13 |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.5.4.3.3 Test procedure | Step Direction Description RQ 1 HS Change the host configuration such that the lower layer identity check mechanism will fail. 2 User HCUT Trigger the host controller to power up and to activate the lower layer. 3 HCUT HS Power up and activate the lower layer (see note 1). 4 HS HCUT Send ANY_OPEN_PIPE on PIPE0. 5... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.5.4.4 Test case 3: initialization using all defined gates | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.5.4.4.1 Test execution | There are no test case-specific parameters for this test case. |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.5.4.4.2 Initial conditions | • The host controller is powered down. |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.5.4.4.3 Test procedure | Step Direction Description RQ 1 User HCUT Trigger the host controller to power up and to activate the lower layer. 2 Power up and activate the lower layer (see note). 3 HS HCUT Send ANY_OPEN_PIPE on PIPE1. 4 HCUT HS Send response (contents are not checked). 5 HS HCUT Send ANY_GET_PARAMETER(SESSION_IDENTITY) on ... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.5.5 Loop back testing | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.5.5.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clause 8.5. RQ8.18 The host controller shall accept the creation of a pipe to its loop back gate from any gate in another host. RQ8.19 When the host controller receives the event EVT_POST_DATA on a pipe connected to its loop back gate, it shall send back the event EVT_POST_DATA with same... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.5.5.2.1 Test execution | The test procedure shall be executed once for each of following parameters: • EVT_POST_DATA data sizes of: 250 bytes. |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.5.5.2.2 Initial conditions | • The HCI interface is idle; i.e. no further communication is expected. • A pipe (PIPE_LOOP_BACK) has been created to the host controller's loop back gate using source GID: "11', and is open. |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.5.5.2.3 Test procedure | Step Direction Description RQ 1 HS HCUT Send EVT_POST_DATA on PIPE_LOOP_BACK containing data of the specified size. 2 HCUT HS Send EVT_POST_DATA on PIPE_LOOP_BACK containing the same data as in step 1. RQ8.19, RQ8.20 |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6 Contactless card emulation | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.1 Overview | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.1.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clause 9.1. RQ9.1 The CLF shall handle the RF communication layers to the external contactless reader. RQ9.2 The host controller has one card RF gate for each RF technology it supports. RQ9.3 For the contactless platform for card emulation mode the pipes to card RF gates shall be created... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.1.2.1 Test execution | There is no test case specific parameters for this test case. |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.1.2.2 Initial conditions | • The HCI interface is idle; i.e. no further communication is expected. • PIPE1 is currently open. • HCI session initialization is ongoing (to be completed during the test procedure). |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.1.2.3 Test procedure | Step Direction Description RQ 0 User Enable the RF technology Type A in the terminal for the UICC prior to executing step 9. 1 HS HCUT Send ADM_CREATE_PIPE on PIPE1, with source GID = '23' and destination GID = GID of type A card RF gate; designate the created pipe PIPEa. 2 HCUT HS Send ANY_OK. RQ9.2 3 HS HCUT Se... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.1.3.1 Test execution | There is no test case specific parameters for this test case. |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.1.3.2 Initial conditions | • The HCI interface is idle; i.e. no further communication is expected. • PIPE1 is currently open. • HCI session initialization is ongoing (to be completed during the test procedure). |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.1.3.3 Test procedure | Step Direction Description RQ 0 User Enable the RF technology Type A in the terminal for the UICC prior to executing step 9. 1 HS HCUT Send ADM_CREATE_PIPE on PIPE1, with source GID = '21' and destination GID = GID of type B card RF gate; designate the created pipe PIPEa. 2 HCUT HS Send ANY_OK. RQ9.2 3 HS HCUT Se... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.1.4.1 Test execution | There is no test case specific parameters for this test case. |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.1.4.2 Initial conditions | • The HCI interface is idle; i.e. no further communication is expected. • PIPE1 is currently open. • The HCUT is configured to forward incoming POLLING REQUEST commands to the HS for processing, using SWP as defined in ETSI TS 102 613 [2] as a data link layer. • HCI session initialization is ongoing (to be completed du... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.1.4.3 Test procedure | Step Direction Description RQ 0 User Enable the RF technology Type F in the terminal for the UICC prior to executing step 7. 1 HS HCUT Send ADM_CREATE_PIPE on PIPE1, with source GID = '24' and destination GID = GID of type F card RF gate; designate the created pipe PIPEa. 2 HCUT HS Send ANY_OK. RQ9.2 3 HS HCUT Se... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.2 Void | Reference: ETSI TS 102 622 [1], clause 9.2. There are no conformance requirements for the terminal for the referenced clause. ETSI ETSI TS 102 695-1 V13.0.0 (2019-04) 55 Release 13 |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.3 Gates | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.3.1 Void | Reference: ETSI TS 102 622 [1], clause 9.3.1. There are no conformance requirements for the terminal for the referenced clause. |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.3.2 Identity management gate | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.3.2.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clause 9.3.2. RQ9.6 If low power mode is supported, the parameter LOW_POWER_SUPPORT of identity management gate shall be '01'. RQ9.7 If low power mode is not supported, the parameter LOW_POWER_SUPPORT of identity management gate shall be '00'. RQ9.8 The host controller shall apply the ac... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.3.3 Card RF gates | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.3.3.1 Overview | Reference: ETSI TS 102 622 [1], clause 9.3.3.1. There are no conformance requirements for the terminal for the referenced clause. |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.3.3.2 Commands | 5.6.3.3.2.1 Conformance requirements Reference: ETSI TS 102 622 [1], clause 9.3.3.2. There are no conformance requirements for the terminal for the referenced clause. |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.3.3.3 Events and subclauses | 5.6.3.3.3.1 Events 5.6.3.3.3.1.1 Conformance requirements Reference: ETSI TS 102 622 [1], clause 9.3.3.3. RQ9.10 The Card RF gates shall support the EVT_SEND_DATA event. NOTE: RQ9.10 is tested in clause 5.6.4. 5.6.3.3.3.2 EVT_SEND_DATA Reference: ETSI TS 102 622 [1], clause 9.3.3.3.1. There are no conformance requireme... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.3.3.4 Registry and subclauses | 5.6.3.3.4.1 Registry 5.6.3.3.4.1.1 Conformance requirements Reference: ETSI TS 102 622 [1], clause 9.3.3.4. RQ9.11 All registries shall be persistent. NOTE: Development of test cases for above listed RQs is FFS. 5.6.3.3.4.2 RF technology type A 5.6.3.3.4.2.1 Conformance requirements Reference: ETSI TS 102 622 [1], clau... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.3.4 Card application gates | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.3.4.1 Overview | Reference: ETSI TS 102 622 [1], clause 9.3.4.1. There are no conformance requirements for the terminal for the referenced clause. |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.3.4.2 Commands | 5.6.3.4.2.1 Conformance requirements Reference: ETSI TS 102 622 [1], clause 9.3.4.2. ETSI ETSI TS 102 695-1 V13.0.0 (2019-04) 66 Release 13 There are no conformance requirements for the terminal for the referenced clause. |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.3.4.3 Events and subclauses | 5.6.3.4.3.1 Events 5.6.3.4.3.1.1 Conformance requirements Reference: ETSI TS 102 622 [1], clause 9.3.4.3. RQ9.74 When sending to a card application gate, the CLF shall respect the values and events as listed. NOTE: Development of test cases for above listed RQs is FFS. 5.6.3.4.3.2 EVT_FIELD_ON 5.6.3.4.3.2.1 Conformance... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.3.4.4 Registry | 5.6.3.4.4.1 Conformance requirements Reference: ETSI TS 102 622 [1], clause 9.3.4.4. There are no conformance requirements for the terminal for the referenced clause. |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.4 Procedures | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.4.1 Use of contactless card application | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.4.1.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clauses 9.4, 9.4.1 and 9.3.4.3.1. NOTE: These requirements apply for usage of ISO/IEC 14443-4 [7]. RQ9.82 9.4.1 In full power mode, when the CLF detects a RF field, the card RF gate shall send the event EVT_FIELD_ON to the card application gate unless otherwise as specified in clause 9.3... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.4.1.2 Test case 1: ISO/IEC 14443-3 Type A | 5.6.4.1.2.1 Test execution There are no test case-specific parameters for this test case. 5.6.4.1.2.2 Initial conditions • The user has to ensure that the RF technology type A is enabled in the terminal for the UICC prior to placing the terminal in the PCD field. • A PIPEa is created and opened by the host with source ... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.4.1.3 Test case 2: ISO/IEC 14443-3 Type B | 5.6.4.1.3.1 Test execution There are no test case-specific parameters for this test case. 5.6.4.1.3.2 Initial conditions • The user has to ensure that the RF technology type B is enabled in the terminal for the UICC prior to placing the terminal in the PCD field. • A PIPEa is created and opened by the host with source ... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.4.1.5 Test case 4: ISO/IEC 14443-3 Type A | 5.6.4.1.5.1 Test execution There are no test case-specific parameters for this test case. 5.6.4.1.5.2 Initial conditions • The user has to ensure that the RF technology type A is enabled in the terminal for the UICC prior to placing the terminal in the PCD field. • A PIPEa is created and opened by the host with source ... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.4.1.6 Test case 5: ISO/IEC 14443-3 Type B | 5.6.4.1.6.1 Test execution There are no test case-specific parameters for this test case. 5.6.4.1.6.2 Initial conditions • The user has to ensure that the RF technology type B is enabled in the terminal for the UICC prior to placing the terminal in the PCD field. • A PIPEa is created and opened by the host with source ... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.4.2 Non ISO/IEC 14443-4 type A applications | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.4.2.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clauses 9.4.2 and 9.3.4.3.1. RQ9.91 9.4.2 In full power mode, and if SWP is not in DEACTIVATED_state, when the CLF detects a RF field, the card RF gate shall send the event EVT_FIELD_ON to the card application gate. RQ9.92 9.4.2 When there are multiple open card RF gates the CLF shall se... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.4.2.2 Test case 1: Non ISO/IEC 14443-4 type A | 5.6.4.2.2.1 Test execution There are no test case-specific parameters for this test case. ETSI ETSI TS 102 695-1 V13.0.0 (2019-04) 76 Release 13 5.6.4.2.2.2 Initial conditions • The HCI interface is idle; i.e. no further communication is expected. • The user has to ensure that the RF technology Non ISO/IEC 14443-4 [7] ... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.4.3 Type B' RF technology | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.4.3.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clause 9.4.3. NOTE: Defining conformance requirements is out of scope of the present document. |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.4.4 Type F RF technology | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.4.4.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clauses 9.4.4 and 9.3.4.3.1. RQ9.98 9.4.4 In full power mode, and if SWP is not in DEACTIVATED state, when the CLF detects a RF field, the card RF gate shall send the event EVT_FIELD_ON to the card application gate. RQ9.99 9.4.4 When there are multiple open cards RF gates the CLF shall s... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.4.4.2 Test case 1: ISO/IEC 18092 Type F | 5.6.4.4.2.1 Test execution Run this test with the following parameters: • Full power mode. • ISO/IEC 18092 [4] Type F command parameters in step 5 are following: - LEN = all values from '03' to 'FF' - CMD0 = 'D8' - CMD1 = '00' - Byte 0 ~ Byte n = any value • ISO/IEC 18092 [4] Type F response parameters in step 8 are fo... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.4.4.3 Test case 2: RF off during ISO/IEC 18092 Type F commands handling | 5.6.4.4.3.1 Test execution Run this test with the following parameters: • Full power mode. ETSI ETSI TS 102 695-1 V13.0.0 (2019-04) 80 Release 13 • The timings of RF off in step 8 are 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29 ms after the beginning of send... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.4.5 Update RF technology settings | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.4.5.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clause 9.4.5. There are no conformance requirements for the terminal for the referenced clause. |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.4.6 Identity check | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.6.4.6.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clause 9.4.6. RQ9.110 If the lower identity check fails, the host controller shall not respond to the external contactless reader with any parameter from the card emulation registries related to the UICC host. NOTE: Development of test cases for above listed RQs is FFS. ETSI ETSI TS 102 ... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7 Contactless reader | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.1 Overview | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.1.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clause 10.1. RQ10.1 The host controller has one reader RF gate for each RF technology it supports. RQ10.2 The CLF shall handle the RF layers of the communications as defined in ISO/IEC 14443-2 [5]. RQ10.3 The anti-collision and activation as defined in ISO/IEC 14443-3 [6] shall be handle... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.2 Reader RF gates | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.2.1 Overview | Reference: ETSI TS 102 622 [1], clause 10.2.1. There are no conformance requirements for the terminal for the referenced clause. |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.2.2 Command | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.2.2.1 WR_XCHG_DATA | 5.7.2.2.1.1 Conformance requirements Reference: ETSI TS 102 622 [1], clause 10.2.2.1. RQ10.6 If b5 of the CTR field of WR_XCHG_DATA is set to zero, application level time-out is deactivated. RQ10.7 If b5 of the CTR field of WR_XCHG_DATA is set to one, then b4 to b1 is a time-out value which shall use to calculate the a... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.2.3 Registries | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.2.3.1 Type A reader RF gate | 5.7.2.3.1.1 Conformance requirements Reference: ETSI TS 102 622 [1], clauses 10.1, 10.2.2.1, 10.2.3.1, 10.2.4, 10.2.4.1, 10.2.4.2, 10.2.5, 10.3.4.1 and 10.4.1. RQ10.11 10.2.3.1 Registry parameters which are in the range reserved for usage by ETSI TS 102 622 [1] but which are not defined in ETSI TS 102 622 [1] shall not... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.2.3.2 Type B reader RF gate | 5.7.2.3.2.1 Conformance requirements Reference: ETSI TS 102 622 [1], clauses 10.1, 10.2.2.1, 10.2.3.2, 10.2.4, 10.2.4.1, 10.2.5, 10.3.4.1 and 10.4.1. RQ10.28 10.2.3.2 Registry parameters which are in the range reserved for usage by ETSI TS 102 622 [1] but which are not defined in ETSI TS 102 622 [1] shall not be presen... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.2.4 Events and subclauses | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.2.4.1 Events | 5.7.2.4.1.1 Conformance requirements Reference: ETSI TS 102 622 [1], clause 10.2.4. RQ10.41 The reader RF gates shall support the EVT_READER_REQUESTED and EVT_END_OPERATION events. NOTE: RQ10.41 is tested in clauses 5.7.2.3.1 and 5.7.2.3.2 of the present document. |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.2.4.2 EVT_READER_REQUESTED | 5.7.2.4.2.1 Conformance requirements Reference: ETSI TS 102 622 [1], clause 10.2.4.1. RQ10.42 On receiving the EVT_READER_REQUESTED event, the CLF shall activate the RF polling (turn on the RF carrier). RQ10.43 The CLF shall accept EVT_READER_REQUESTED event on any open pipe of any reader RF gate. NOTE: RQ10.42 and RQ.... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.2.4.3 EVT_END_OPERATION | 5.7.2.4.3.1 Conformance requirements Reference: ETSI TS 102 622 [1], clause 10.2.4.2. RQ10.58 Upon reception of the event EVT_END_OPERATION from a host the CLF controller shall turn the RF field OFF if the EVT_TARGET_DISCOVERED has been previously sent to that specific host NOTE: RQ10.43a is tested in clauses 5.7.2.3.1... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.2.4.4 EVT_READER_STATUS | 5.7.2.4.4.1 Conformance requirements Reference: ETSI TS 102 622 [1], clause 10.2.4.2. RQ10.81 Rel-11 upwards The CLF shall send this event once after the reader status event enable bit (b1) in the STATUS_EVENT_EN is changed to 1. RQ10.82 Rel-11 upwards The CLF shall send this event as long as the reader status event en... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.2.5 Responses | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.2.5.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clause 10.2.5. RQ10.44 If command WR_XCHG_DATA is successful, response shall be ANY_OK. RQ10.45 If command WR_XCHG_DATA is rejected and /or not completed, response shall be ANY_E_OK. RQ10.46 If Application level time-out occurred, the response shall be ANY_E_TIMEOUT. RQ10.47 If Target ha... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.3 Reader application gates | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.3.1 Overview | Reference: ETSI TS 102 622 [1], clause 10.3.1. There are no conformance requirements for the terminal for the referenced clause. |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.3.2 Command | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.3.2.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clause 10.3.2. There are no conformance requirements for the terminal for the referenced clause. ETSI ETSI TS 102 695-1 V13.0.0 (2019-04) 95 Release 13 |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.3.3 Registry | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.3.3.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clause 10.3.3. There are no conformance requirements for the terminal for the referenced clause. |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.3.4 Events and subclauses | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.3.4.1 Events | 5.7.3.4.1.1 Conformance requirements Reference: ETSI TS 102 622 [1], clause 10.3.4. There are no conformance requirements for the terminal for the referenced clause. |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.3.4.2 EVT_TARGET_DISCOVERED | 5.7.3.4.2.1 Conformance requirements Reference: ETSI TS 102 622 [1], clause 10.3.4.1. RQ10.48 The existence of an RF target in the field of the activated RF technology shall be signalled to the reader application gate by EVT_TARGET_DISCOVERED event. RQ10.49 If there is a single target in the reader field and the activa... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.4 Procedures | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.4.1 Use of contactless reader application | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.4.1.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clause 10.4.1. RQ10.51 On receiving the EVT_READER_REQUESTED event, the CLF shall enable the RF polling. RQ10.52 Once RF polling is enabled, the CLF shall start the detecting of a target according to all reader RF gates of the host that have an open pipe. RQ10.53 When a target has been d... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.4.2 Contactless reader not available | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.4.2.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clause 10.4.2. RQ10.90 Rel-11 upwards After receiving ANY_GET_PARAMETER(OPERATING_STATUS), if the reader is not available the CLF shall report to the UICC that the reader is not available in the response ANY_OK (not available) as specified in RQ10.XB and RQ10.XI RQ10.91 Rel-11 upwards Af... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.4.3 Error management | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.7.4.3.1 Conformance requirements | Reference: ETSI TS 102 622 [1], clause 10.4.3. RQ10.93 Rel-11 upwards If the CLF detected a non-recoverable RF error after WR_XCHG_DATA reception and the reader RF gate replies in sending the response ANY_OK with parameter "Error indicator" set to '01'. RQ10.94 Rel-11 upwards The CLF shall be able to restart the reader... |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.8 Connectivity | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.8.1 Overview | Reference: ETSI TS 102 622 [1], clause 11.1. There are no conformance requirements for the Terminal Host for the referenced clause. |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.8.2 Connectivity gate and subclauses | |
92ea1f0bb3b750219f3775a220a38c6d | 102 695-1 | 5.8.2.1 Connectivity gate | Reference: ETSI TS 102 622 [1], clause 11.2. RQ11.8 Rel-11 upwards As destination gate, the connectivity gate shall accept at least one pipe from each host in its WHITELIST. NOTE: Development of test cases for RQ11.8 is FFS. ETSI ETSI TS 102 695-1 V13.0.0 (2019-04) 97 Release 13 |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.