text stringlengths 160 6.48k | summary stringlengths 31 590 |
|---|---|
The key to this filtration technique is food-safe activated carbon, which can be bought at your local pet supply store. Activated carbon is a substance created to have holes in it smaller than the eye can see, making it ideal for filtering out fine impurities from a substance. You'll want at least 3 cups (1,020 g) of this for filtering. It should be relatively cheap to purchase from your local pet store, or you can buy bags in bulk from online retailers for even less. In addition to your activated carbon, you'll also need: Cheap vodka Coffee filters Colander 2 bottles/containers (larger than the amount of vodka purchased) Funnel Strainer/colander Straight from the bag, your activated carbon will have some dust remaining on it from processing and handling. You don't want this residue getting into your vodka, so you should remove it from the carbon first by running your carbon under water while in a colander or strainer. Then you should: Place your activated carbon in a coffee filter. Cone shaped filters that will roughly match the shape of your funnel will make the filtration process easier, but standard coffee filters will work as well. Put about 2 inches (5 cm) of food-safe activated charcoal into your filter, and then place the filter inside your funnel. Place your funnel firmly into the mouth of your container so that it is stable and will not fall over. Then pour vodka into your funnel until it is ¾ of the way full, though you'll want to keep the level of your vodka from going over the top line of your filter. If your vodka rises above the filter, there's a chance that it will trickle between the filter and funnel without receiving the purifying effects of the activated carbon. It may take a considerable amount of time for your vodka to drip filter through the carbon into your container. Filter your cheap vodka until none remains. When the level of your vodka begins to diminish in your funnel, you should add more to continue the filtration process. When finished the first filtered batch: Move your funnel with its filter and activated carbon securely into your second container to prepare for round 2 of filtration. Run your filtered batch through your carbon several times. The more times you pass your vodka through your activated carbon, the more impurities the carbon will soak up from it. Since fresh activated carbon filters at a better rate, after your second or third filtration cycle, you may want to change your coffee filter and activated carbon. Don't forget to rinse your fresh activated carbon to remove any silt or dust from it before using it for filtration. You should aim to keep your vodka exposed to the activated carbon for a minimum of 5 minutes to ensure the best results. | Gather your filtration materials. Prepare your activated carbon. Drip filter your vodka into your container. Prepare for round 2 of filtration. |
"Snail mail" can take a while to be processed, delivered, read, and replied to. A time before that and people may write it off thinking, "I don't know what I'm doing for breakfast, much less next month!" Too soon and people already have plans. Around 2 weeks out is your best bet. An outdated or misspelled address could leave one of your best friends out of your party! If you're not sure of someone's address, contact them and confirm it. A mailed invitation is a great opportunity to impress a guest, but don't over-complicate an invitation to a simple party - this may intimidate guests. You're just inviting them for a good time! Have something on the envelope that clearly indicates your invitation is something to be intrigued by. Yours isn't just another piece of junk mail! | Make sure to send out written invitations at least two or three weeks before the event. Make sure you have the current and correct addresses of your guests. Decorate your card appropriately. |
The first thing you will need to do is log back into your Pinterest account from your computer and get on your main screen. Once you are logged in to Pinterest, you will need to click the profile bar at the top right of the screen. A menu will drop down; click on the “Settings” button. ” Once the next screen loads, you will see your account info. The first one is your email address. Click on the red link right below that says “Change your Password”. A pop-up will appear and it will prompt you to enter your old password, and your new password twice. This will confirm you entered the password you want. Your password has been changed and your account is secure! | Log in to Pinterest. Go to Settings. Click on “Change your Password. Enter new password. |
Allow the dish to cool for about 5 minutes in order for the sauces to solidify slightly. Season the spaghetti to taste with a pinch of black pepper and use a spaghetti spoon to serve to guests! Consider serving with garlic bread, which can be used to scoop up the delicious pasta sauce. Divide and scoop the pasta into individual containers and store them in the refrigerator for up to a week to knock out your Sunday evening meal prep! | Season with black pepper and serve once the dish has cooled. |
The focused beam of illumination will make it easier to catch sight of pests tucked away in dark spaces. Whenever possible, hold your flashlight close to the surface you're inspecting at a parallel angle. This will cause bugs and their eggs to cast a more noticeable shadow. While you're at it, turn on all of the lights in the room to maximize your visibility. Contrary to popular belief, light usually doesn't do much to keep bed bugs away. When you spy a cluster of bugs, insert your tool into the infested space and slowly drag it towards you to scrape them out. Hold the edge of the tool firmly against the surface and angle it to cover more ground and ensure that none of the bugs have a chance to scurry free. Ideally, the tool you use should be relatively durable. That way, you won't have to worry about it breaking accidentally. You probably won't be able to fish out every last pest like this, but it can be a good way to thin their numbers. Mash the tape or cloth directly into the pests, aiming to pick up as many as you can. Due to their size, they'll have a hard time escaping from the adhesive or moist, textured cloth. Stickier types of tape, such as duct or packing tape, will offer the best results. If you decide to go with the damp cloth approach, keep a small container of hot, soapy water nearby where you can deposit the bugs you collect. If you're using tape, fold the piece over on itself to make absolutely sure the bed bugs will stay stuck. If you're using a cloth, submerge it in your bucket of water and wring it out thoroughly to loosen the bugs. Throw the tape in a sealed trash receptacle outside and dump bug-filled water a safe distance from your home. After doing battle with bed bugs, always wash the clothes you're wearing as a precautionary measure. You can also heat-treat clothing and accessories in the dryer for 30 minutes if you don't have time to do a full load of laundry. Be sure to scrub your bucket with hot water and a powerful detergent to kill bacteria left behind by bugs or their skin castings or droppings. | Grab a flashlight to aid you in your search. Force encamped bugs out of hiding with a card or similar thin object. Trap the exposed bugs with a piece of tape or a damp cloth. Dispose of the trapped pests securely outside of your home. |
Wearing your seatbelt is one of the most important things you can do to survive a car crash. Make sure that your lap belt sits low on your hip bones and that the shoulder belt goes across the center of your chest. Children should be seated in proper child restraints until they are large enough to properly wear a lap and shoulder belt. You won't have to worry about head support unless you are driving a really old car from the 1980s or under. Older cars, which may just have lap belts and almost never have any additional safety features, are generally less safe than large vehicles. SUVs tend to be more prone to rollover accidents than cars. Try to drive the safest car that suits your needs and budget. The Insurance Institute for highway safety maintains extensive crash test ratings and lists of safe vehicles of different sizes and styles. In Europe, Euro NCAP maintains these ratings. Their website is at http://euroncap.com If an object could become a projectile during a crash, either remove it from the car, or stow it in the trunk, or, in the case of a minivan, in the well behind the seat. Airbags and seat-belts significantly reduce injury and death in automobile accidents. If there is a high-speed crash, the car's airbags inflate. They have saved lives, but they inflate with such force that if you are leaning against the dashboard when they inflate you will be thrown backward and injured. If the car has curtain airbags (also called side airbags) it is also dangerous to lean against the sides of the car. | Wear your seat belt. Drive a safe car which is fitted with seat belts and other safety features. Store objects so that they will not hit you if the car gets hit. Make sure the safety systems on your car are serviced regularly. Do not lean against the dashboard. |
Monitor the amount of water your dog drinks daily. If you notice any big changes in this amount, take note. Drinking too much or too little can indicate a problem that requires veterinary attention. Rule out everyday reasons such as strenuous play or a hot day. If you notice your dog drinking much more than normal for a consecutive week, see your vet. Changes in appetite, especially those that lead to weight loss or gain, can indicate illness.Unexpected weight loss or gain should always be met with a trip to the vet. In the short term, loss of appetite for your dog can be a sign of fever, pain, or stress, as well as many other possible reasons. If the loss of appetite is combined with any other noticeable symptoms, you should see a vet immediately. Vomiting or diarrhea is a reason for concern with your dog. These symptoms can be a sign of anything from swallowing a sharp object to ulcers to parasites. Single instances of vomiting or diarrhea are not necessarily a cause for concern. Repeated instances,especially lasting more than twenty-four hours,require a vet. Blood, in either vomit or diarrhea, can be a serious symptom and needs treatment as soon as possible. | Watch for excessive drinking. Track your dog’s appetite. Pay special attention to digestive upsets. |
You can remove an ingrown hair by inserting a sterile needle into the pimple and using sterilized tweezers to catch the hair and pull it out; however, inserting a needle into your skin can lead to infection if the needle is not sterile, so it is best to check with your doctor first before trying this method. It is best to try to clear up the ingrown hair by keeping it clean before you try using a needle to remove it. If the ingrown hair is on your face, you risk scarring and disfigurement. If you aren't comfortable doing this yourself, you can ask your doctor to remove the ingrown hair for you. Dead skin cells can build up over an ingrown pimple and cause the skin to look thicker and darker. Retinoids can get rid of dead skin cells, which may make ingrown pimples go away faster. Retinoids are available by prescription only, so ask your doctor if you are interested in trying them. Ingrown pimples can become red and inflamed, which may make them more noticeable. Using a steroid cream will not get rid of ingrown pimples, but a steroid cream can reduce redness and swelling. As a result, your ingrown pimples may blend in with the rest of your skin a little better. Because ingrown pimples are prone to infection, antibiotic ointments may help to control infections. If you develop a severe infection from an ingrown pimple, then your doctor may prescribe an oral antibiotic. Make sure that you follow your doctor's instructions for using antibiotic creams and pills. Most ingrown hairs will go away on their own and your doctor may advise you to just leave it alone. If the ingrown pimple bothers you, then you can cover it with a loose band-aid until it heals. While you are waiting for the ingrown pimple to get better, do not tweeze, wax, or shave the area, as this can cause further irritation. | Ask your doctor about removing an ingrown hair with a sterile needle and tweezers. See your doctor about retinoids. Ask your doctor about using a steroid cream to reduce inflammation. Talk to your doctor about an antibiotic ointment. Try to be patient. |
Pay specially attention to those written by women who have experienced it, or who work with it! Reading about other women's experiences will help you to understand the variety of possibilities during menopause, as well as reassuring you that you're not experiencing menopause alone. A good book to begin with is Dr Christiane Northrup's The Wisdom of Menopause: The Complete Guide to Physical and Emotional Health During the Change. Use books or the internet to research physical and emotional symptoms. Knowing what to expect will help when you're feeling irritable, dissatisfied, or impatient. Tracing these moods back to the reality of menopause will help you to work through them, rather than viewing yourself as suddenly ill-tempered. There are plenty of stories about the dreadful journey women go through when experiencing menopause, often published in women's magazines. The reality is that these stories highlight the less usual experiences; the more sensational and unusual the experience, the more newsworthy but that doesn't mean it's a reflection of the average experience. Look for books and articles that reflect good or neutral experiences, rather than simply bad ones. If you don't know what to expect from menopause, you'll be more vulnerable to the horror stories, the pressure to undergo treatments that you might not necessarily want to have, and the worry that your changes are out of your control. One way to combat this is to simply hear first hand accounts from women that you know! This will expose you to a variety of unique experiences. Information is power that leads to wisdom. As you absorb information on menopause, trust your own intuition, your critical thinking skills, and especially your body to tell you what is true for you. You probably know much more than you think! | Read books about menopause. Learn what to expect. Seek out a variety of stories. Talk to other women. Trust what you know. |
A vivid logo will easily identify your company in the marketplace. It should also advance the emotions or ideas you want consumers to attach to your business. For example, the Nike “swoosh” suggests energy and speed—attributes a sportswear company would want clients to associate with it. A graphic artist can help you come up with an effective logo. Although you don't have a lot of money, ask if you can barter your services. Also look for cheap designers on websites such as Fiverr. If you use your logo in commerce, then you should trademark it. In the U.S., you can trademark a logo for a few hundred dollars. A tagline is a brief sentence that captures the essence of your business. Your tagline should complement your logo. If you use it as a trademark or service mark, you should register it as well. For example, Nike's “Just Do It” perfectly complements its swoosh logo. Both promote movement, athleticism, and speed. “Just Do It” also encourages couch potatoes to get up and get moving, which creates a larger pool of potential consumers. If you run a massage parlor, you might have a pair of hands as your logo. Your tagline could be, “Give yourself the gift of rest….” With this tagline, you are reaching out to people who might feel guilty about splurging on a massage. The tone you use in communications also conveys your brand. For example, if you’re casual and breezy, you can write in an informal style. Your sales people should also speak in this voice. If you’re creating a more academic brand, then you can use more elevated language—though you should strive not to sound snobbish. A brand is more than a logo. Instead, you express your brand each time you interact with the public. For example, your marketing materials should have the same logo placement, color scheme, and feel. If you have enough money to afford celebrity spokespeople, make sure they align with your brand. For example, a business catering to white collar men probably shouldn't use a teen X Games champion as a spokesperson. Instead, the local golfing pro might be more appropriate. If your brand is young, fresh, and irreverent, then younger celebrities are probably effective. The public associates your employees with the company. For this reason, you should train employees on how to communicate your brand. For example, you might want to script sample conversations they can have with customers. You might also want to set a dress code that reinforces your brand. You must follow anti-discrimination laws when hiring, so don't exclude workers on the basis of race, sex, religion, or age. In some situations, the line is a little blurry. For example, if you’re selling sex appeal, you can hire only men or women, depending on your target clientele. However, you should probably consult with an attorney if you have questions. You shouldn't try to look or sound like a big chain competitor. Instead, find your own unique style and voice. Many large chains are now trying to brand as smaller independents, so you have an advantage. You’ll muddy the waters if you aren't consistent with your branding. For example, don't use a breezy style in your advertisements and then suddenly become serious. Your consumers will be confused. You’ll also dilute your brand if you begin advertising to different market segments. For example, a clothing brand that appeals to pregnant women will probably lose customers if it introduces a line of sexy lingerie. In that situation, you’re mixing your message, and your branding efforts will fail. You are at greatest risk of undermining your brand when you try to introduce new products or services. You can certainly do so if they align with what you currently offer clients. However, consider starting a second company if they don't. | Create a logo. Write a tagline. Establish a branding voice. Brand across all written materials. Select appropriate spokespeople. Train your employees to communicate your brand. Avoid imitation. Stay consistent. |
To start your practice of retraining your breathing you will need to rest comfortably on your back and relax your body. Relaxing the entire body will help you focus entirely on your breathing and let you get the most out of your breath training. Take off any tight or restrictive clothing such as a belt or tie. You can try putting pillows under your knees or back for extra comfort. Breathing during an episode of hyperventilation is generally shallow, at the chest level, and rapid. You will be working to retrain your breathing to have more rhythmic and complete inhalations using your stomach and diaphragm. By placing an object on your stomach you help keep the focus on this area and provide resistance to strengthen the muscles responsible for abdominal breathing. You can place something like a telephone book on your stomach while you retrain your breathing. Avoid any items that are too heavy or are an unusual shape. These can either cause injury or be difficult to balance on your stomach. After you are comfortably laying down and have a suitable object placed on your stomach you can begin to retrain your breathing. The goal here is to raise and lower the item on your stomach, using your abdomen like a balloon. Keep the following in mind as you practice this new way of breathing: Breathe through your nose when practicing. If you can't breathe through your nose you can purse your lips and breathe through your mouth. Take comfortable and rhythmic breaths. Breathe smoothly and try to avoid pauses on the inhalation or exhalation. Only your abdomen should be moving. Keep the rest of your body relaxed. In order to get the most out of this new method of breathing you will need to get regular practice. By practicing you will become more comfortable using this method of breathing, allowing you to avoid hyperventilating during a stressful time. Practice for at least five to 10 minutes a day. Gradually slow your rate of breathing during your practice sessions. Begin practicing this way of breathing while sitting up or walking. Eventually you will want to use this method right before you expect a panic attack or during one. | Lie on your back and relax. Put something over your stomach. Breathe using your stomach. Keep practicing. |
Know who is behaving abnormally, like those repeatedly invading others personal space, since they could be potential assailants. Take a mental note of all the ways you can exit an area quickly, in case a situation suddenly escalates. Keep your periphery active by moving your eyes around, which will help you anticipate obstacles in advance. Your periphery is the outer boundary of your vision, what you indirectly see when staring at things. Practicing these behaviors will help you see violence before it happens, and give you time to prepare a response should you need one. Indications of this can include nostril flaring, excessive swearing, an out-thrust jaw, dilated pupils, or a whitening face. Once adrenaline begins pumping through potential assailants, their behavior becomes more difficult to predict. Be prepared to defend yourself no matter what they seem to be doing. Talk to your potential assailant and try to get him to step down or see the value of making truce. If you've got the gift of gab, here's where you can use it. Keep your guard up while you negotiate. Say something like: “I don't want either of us to get hurt. Can we try to just talk this out?'” You can also try saying: “What's the problem? Is there any way I can help?” Avoid saying things like “Calm down buddy” and “Take it easy,” which can increase tension. The primary objective of a fight should be to protect yourself, not harm the other person. If you believe you are in serious danger, try to exit without causing the other person alarm. Whether or not you actually end up in a physical altercation, your opponent can no longer damage you once you’re gone. There are a select few times when fighting will prevent future problems, but on the whole, you win 100% of the fights you defuse or avert entirely. Know your limitations. Going to the hospital with a broken nose might not be worth the "cred" that you get for staying in a losing battle. | Maintain an awareness of your surroundings at all times. Watch for aggressive body language from potential aggressors. Try to defuse situations with passifying dialogue. Leave at the earliest opportunity. |
Its icon resembles a blue background with a white "W" on top. If you'd rather edit an existing document, simply double-click the document in question. It's in the top-left corner of the templates page. If you're editing an existing document, skip this step. It's at the top of the Word window, to the right of the Home, Insert, and Design tabs. This option is below and to the left of the Layout tab. Clicking it will prompt a drop-down menu with the following options: One - Default setting for Word documents. Two - Splits the page into two distinct columns. Three - Splits the page into three distinct columns. Left - Concentrates most of the text on the right side of the document, leaving a narrow column on the left. Right - Concentrates most of the text on the left side of the document, leaving a narrow column on the right. If you highlight a part (or all) of your document before clicking a column option, your document will be reformatted to appear in columns. Doing so will apply invisible columns to your document; as you type, you'll notice that your text jumps to a new line before reaching the standard right-most margin. Once you reach the bottom of the page, your text will continue in the next column until you reach the bottom of the page again, and so on. | Open Microsoft Word. Click Blank document. Click the Layout tab. Click Columns. Click a column option. |
Most machines have a setting which can be set by the operator to tighten the claw once in X amount of tries with a bit of randomization. Effectively, this means that the claw will be "loose" most of the time, but will tighten once in every X amount of turns (on an average––not necessarily every nth turn), so people only win every so often. There are also alternative, tricky programming for some machines. On such machines, there is a dual strength setting that causes them to grip with full strength initially and loosen after some time, giving the impression that the toy was caught but managed to slip. This effectively makes the machine more like a slot gambling machine rather than one depending on skill! Some older machines have claws with fixed strength from turn to turn. This is because these machines have claws with strengths that are fixed with a screw by opening the machine. In the case of such an older machine, skill can make quite a difference. | Understand the way the claw is programmed to close. Be aware of the peculiarities of the older machines. |
Walking away from a confrontation with someone who hates you does not mean that you are admitting defeat or accepting the reality that a perfect solution cannot be reached. Instead, it demonstrates that you have complete control over the situation by not engaging in their negativity. Haters never offer constructive criticism or positive feedback, only criticism. If you already know this then there is absolutely no reason to have a dialogue with them. Listening to a hater will only ruin your day. All of the negativity will do is hurt your feelings, make you angry, or incite you to participate in the pessimism. A hater will get under your skin whenever they can. It is important to stay calm when this happens so that a physical confrontation does not occur. Stay level headed and understand that a hater does not deserve a response from you, especially in retaliation. By staying calm and not responding to their attacks you demonstrate that their opinions and destructive comments are not valued by you. Over time, this should reveal to them that attacking your character is a waste of time. Remaining calm will conserve your energy for more positive pursuits. Do not waste your time or energy on a situation that does not deserve your attention. Since a hater will seek out negativity and place undue criticism on you don't submit to their turpitude. They will want you to explain your mistakes in front of others to reveal your imperfect self. In response, never justify, explain, or apologize to them until they approach you in a respectful and sensible manner. Value your self-worth and don't degrade yourself to their level unless they treat you with the respect you deserve as a person. In this case, it is probably unwise to reply with a smart comment or to try and play it off as nothing important because it gives them an opportunity to turn the tables again on you for not addressing their accusation to begin with. Let them embarrass themselves without help. This might be difficult to do if you work with this person or have to deal with them on a daily basis, but you can take steps to limit your exposure to them. By limiting face time, it will reduce how many times a day you have to take evasive action or submit yourself to their hate. Simple changes to your daily schedule will throw the timing off just enough to help you avoid the hater. Try taking your breaks at work as different times; come home later in the day or leave earlier in the morning if the hater is your neighbor or roommate; or stay in different rooms of the house during holidays if the hater is an extended family member. In each of these cases, if you come into contact with the hater then either politely excuse yourself and exit the area or try to keep things neutral and unemotional if you must interact with them. Avoid bringing up topics that provide an opportunity for the hater to become negative towards you. | Walk away. Stay calm. Do not offer an apology. Limit your interaction with them. |
Sometimes, we get so wrapped up in our wants and needs, that we fail to ask what our partners want or need. This neglect can put a damper on a relationship, which is why it is important that we ask our partners about what they want. When you notice any differences in your partner's behavior, ask them: How they are doing emotionally and physically What are they wants, needs, or expectations If they are happy, tired, etc. Openness is crucial to a relationship; building emotional walls will weaken a relationship and shut your partner out of important aspects of your life. It's important to be emotionally vulnerable with your partner; be honest, share your sincere feeling, hopes, and concerns. You should also expect the same level of openness and vulnerability from your partner. You can start a vulnerable conversation by saying something like: “I’ve been having a hard time at my job lately; can I talk to you about it?” “I’m worried about a direction that our relationship is taking. Can I talk to you about us?” “I haven't been very happy lately; it's a struggle to get through the day & I’m concerned about it. Do you mind if I open up to you about this?” Rather than idealizing your partner or holding them to unrealistic standards, enjoy and respect them for the human they actually are. Every person has flaws and strengths, and it is important to understand and accept all the parts of your partner's personality. Treat your partner with the same patience and respect that you would like to be treated with, and forgive them when they offend you. Holding grudges and records of offense will only create suspicion and mistrust in your relationship. Don't expect forgiveness to happen overnight. Sometimes, it can take several nights, weeks, or even months. This is perfectly fine. Although healthy physicality in a relationship will often include sexuality (which should develop in a way comfortable and fun for both partners), physical contact can be much more than sexual acts. Even the slightest physical touch can show affection and dedication and makes a relationship feel fresh and exciting. You can try some simple ideas like these: Hold your partner's hand. Put your arm through theirs when you're walking together. Rest your head on their shoulder when watching a movie. Make direct eye contact while you're talking with your partner. Don't waste each other's energy on the things that don't matter. It's easy to let the day-to-day concerns (which are part of any relationship) drown out the pleasurable, fun parts of being together; they can even detract from your commitment to the relationship. Maintain your relationship health by focusing on long-term goals and permanent aspects of your relationship, like: Things that first attracted you to your partner. Fun activities that you and your partner have done together. Long-term goals and plans for your future. Ways you and your partner have grown closer, and ways you can continue to grow closer. | Be sensitive to each other's needs. Talk openly and vulnerably with your partner. Appreciate your partner for their strengths and the things that make them unique. Forgive your partner when they upset you. Be physical with your partner. Look at the big picture. |
Study the things that are important to your company and the people that buy your products. Focus on communicating company culture, rather than simply self-promoting, in all your customer communication. For example, become a part of a local business organization or post information on your social media accounts that tout your city and state. For example, if you are a retailer of cowboy boots, perhaps it is a good idea to have a hashtag on Instagram that called #travelling boots so that your customers post pictures of themselves wearing their boots. Try sending a customer satisfaction survey or customer product input survey at least once per year. Send the survey out over Facebook and email. Ask your customers to have a hand in buying new products or refining those you already carry. Send an email after someone has received their goods to see if they are satisfied. One e-commerce site, ModCloth, asks customers to “Be the Stylist” and vote on their favorite outfits, so that ModCloth restocks the most popular items. You can also suggest other dresses that they don't currently carry. Invite customers to celebrate with you when you open a new location, expand your hours or receive an award. They will want to know that they are supporting the best businesses out there. Build loyalty by offering timely discounts and incentives. Try to tailor your messages to each group. For example, a new customer would get different emails than a customer that has buying for years. Not only do comment sections and reviews help your website rank more highly in search results, but they create a forum for customer service. Unless a comment is highly inflammatory, try to handle concerns publicly, so people can see your willingness to provide good customer service. Have a weekly drawing or customer of the week, so you can get customer perspective and participation. | Present your business culture and location. Build an online community where customers can offer advice or post questions. Ask for customer feedback. Announce your successes. Offer a free gift or exclusive offer to repeat customers. Separate types of customers in your database. Encourage people to review your products in a public forum, like Facebook or online. Feature your customers on your online channels. |
The snake braid will work best with clean, healthy, and moisturized hair that's completely dry. In the shower or bath, wash your hair with a mild cleanser to remove dirt, oil, and styling products. Condition your hair with your favorite conditioner, and after you rinse it out, towel dry your hair and let it air dry. If you're in a rush and need to blow dry your hair, apply a heat-protecting product beforehand. Like a regular braid, you can make a snake braid from a section of hair anywhere on your head, and you can also make it any size. If you're going to be creating a specific style with the braid, use that to guide you regarding where and how large to make the braid. To practice a basic snake braid, part your hair normally. On one side of your part, grab a small to medium section of hair from the center of your head, and use this to make your braid. To make a snake braid, you first make a regular braid. Comb the section with a wide-toothed comb to remove knots, and then divide the section of hair into three equal parts. To make a basic braid, hold the left section of hair in your left hand, hold the middle section of hair with the thumb and index finger of your right hand, and hold the right section of hair with the remaining fingers on your right hand. Twist the right and middle sections of hair so the right section comes over top and becomes the middle section. Then, twist the left and middle sections so the left section comes over top and becomes the middle. As you weave the hair, be sure to shift the sections back and forth between your hands as they alternate between being the left, middle, and right sections. Continue alternating the twists with the right–middle and left–middle sections so that the three sections become woven into one another. Stop when you reach the end of the sections and only have about one inch of unbraided hair left. | Start with hair that’s clean and dry. Choose where to make your braid. Divide the section. Braid the hair. |
Make sure that the bully knows that what they have done is not appropriate. This probably won't stop the bullying, but it will help you make your case to the authorities. Make sure to save the message. Keep your message simple and direct. Write, “Please do not contact me again. I will report any emails, texts, calls, messages, or posts from you.” Avoid profanity, name calling, or using all caps. Even if you’ve asked the bully to stop, you might continue to receive messages. It's normal to be tempted to respond and stick up for yourself, but don't. It might take some willpower, but you should refuse to engage. Put down your phone or walk away from your computer. Take a walk around the block to cool off, if you need to. . Change the settings on your email, cell phone, and social media accounts so that the bully can't contact you. This will make it harder for the bully to contact you. If they still find a way to reach you, you’ll know that it is definitely time to talk to the authorities. Do not delete messages or posts in hopes that the bullying will just stop. Instead, collect the evidence to use when you make a report to the authorities. If you have a printer, make copies of all emails, messages, and posts. Take screenshots of all electronic communications from the bully. Save them in a file on your computer or phone. | Send a message telling the bully to stop. End communication with the bully after telling them to stop. Block the bully Make copies of contacts from the bully. |
Keep the gloves on at all times to protect your hands. They will protect you in case any of the tools slip when in use. Also, put on polycarbonate protective glasses or goggles to shield your eyes from metal fragments. Rotary tools have detachable heads. You can swap out the heads with 1 of many different accessories. For cutting screws, you want a flat wheel designed to cut through metal. Fit it onto the rotary tool according to the manufacturer's instructions. Test the wheel by turning on the rotary tool. The wheel should spin freely at a consistent speed. Keep your biggest flat blade screwdriver nearby to use as a point of comparison. Tip the rotary tool so the edge of the wheel is over the screw head. Lower the tool down to begin cutting into the screw. Work slowly and carefully to widen the cut to the size you need. An ideal slot creates a tight fit for the screwdriver so you can turn the screw with maximum force. Push the screwdriver head into the slot you made. Continue pushing down on the screw as you begin turning it counterclockwise. If the slot is effective, the screw will loosen and pop out. If the slot is too small, you can widen it with the rotary tool. If the slot is too big, you may not be able to remove the screw this way unless you can find a larger screwdriver. Some screws will still be rusted in place even after you cut a perfect slot. Use heat to remove them. | Wear heavy leather gloves and protective goggles. Place a cutting wheel on a rotary tool. Cut a slot the size of your largest screwdriver into the screw head. Use the screwdriver to remove the screw. |
Decide on the colors that will appear in your round braid. Select just one or two, or up to as many as four or eight different colors, depending on which type of braid you do. For a 4-strand round braid, one or two colors are typically used in different configurations, but you can use up to four different colors for each strand if you wish. For an 8-strand braid, typically one or two colors are used to create patterns, but you can use as many as eight different colors for each strand. Decide on how you’d like your colors to appear once they are braided, and arrange the strands accordingly. Two colors on a 4-strand round braid can create a spiral or diamond shapes, depending on what order the colored strands are in when you begin. Begin with two strands of the same color in the middle, and the outside two strands in a different color, for a pattern that will look like a spiral. In other words, you can hold one strand of each color in each hand if you are holding onto the strands to braid. Begin with two strands of one color on the left and two strands of another color on the right for a pattern that will look like diamond shapes or a square with four colored sides. In other words, hold one color in one hand and one color in the other if you’re holding onto the strands the whole time to braid. Decide on how you want your colors to look once included in an 8-strand braid. Arrange the strands according to whether you’d like a large chevron, small chevron, or stripe pattern for your completed braid. For a two-color wide chevron pattern that appears on two sides of the braid, place two strands of each color on the left (or in your left hand) and two strands of each color on the right (or in your right hand). Four strands of the same color should all be next to each other in the middle. For a two-color narrow chevron pattern that appears on all four sides of the braid, arrange the strands alternately with a strand of the first color, then a strand of the second color, then a strand of the first color, and so on. For two-colored stripes down the braid, place all four strands of one color on the left (or in your left hand) and all four strands of the other color on the right (or in your right hand). | Choose the colors for your braid. Arrange your colors for a 4-strand braid pattern. Arrange your colors for an 8-strand braid pattern. |
The hole should be about as deep as the root ball but must be two to three times wider. Burying the plant too deeply can cause the base of its main stem to remain underground, which can cause moisture damage. Failing too make the hole wide enough can make it difficult to fill the hole in with enough soil. Gently tip the container onto its side. Apply pressure to the sides of the container using one hand while carefully lifting out the entire plant, root and all, with your other hand. Once removed, set the plant upright in the center of the hole you dug. If using a balled or burlapped plant, carefully cut any string or material surrounding the root before placing it in the hole. Avoid damaging the root as you free the football or transplant the bush. Loosely fill roughly half of the space around the root ball with garden soil. Backfill the soil into the hole gently. Do not pack it into the hole with your hands since doing so could cause damage to the root system. Pour enough water onto the soil you've added enough to cause the soil to sink further into the hole. Wait a few moments after applying the water. You need to let it remove all the air pockets and thoroughly settle the soil. Fill up the rest of the empty space with additional garden soil. As before, backfill the soil in loosely rather than packing it in with your hands. Apply more water. This time, you should add enough water to get the soil thoroughly damp. Wait a few minutes and watch the water on top of the soil. It should eventually sink into the soil, leaving no puddles behind. The top of the soil should still seem damp to the touch, though. If you are planting multiple oleander bushes, you should space each oleander bush 6 to 12 feet (1.8 to 3.7 m) apart from any others. For each additional oleander plant, follow the same instructions regarding how large to make the hole and how to fill the hole in. | Dig a large enough hole. Carefully transfer into the ground. Fill the hole halfway. Water well. Fill the rest of the hole. Water thoroughly. Keep plenty of space in between the plants. |
You can use olive oil, mineral oil, petroleum jelly, butter, or mayonnaise to suffocate the bugs. Have enough on hand to cover the person's entire scalp. For example, four tablespoons of petroleum jelly would be enough. After collecting your product, choose the room in which you would like to do the treatment. Aim for a space without carpeting that you can clean thoroughly afterwards. A kitchen or bathroom or anywhere outside would be appropriate. Gather gloves, clean towels, a bucket of hot water, and a shower cap. Have the person sit on a stool with a height at which you can easily work with their hair. Put disposable gloves on your hands. Have the person cover eyes with a towel when applying any treatment. You do not want to get oils accidentally in her eyes. For younger children, the overnight shower cap treatment is not recommended. The cap could cause the child to suffocate. Instead, have the child wear the cap during the day. Ensure that the product covers the person's entire head, as close to the scalp as possible, and all their hair. Put a shower cap on the person's hair. Make sure it is not loose — it should be as tight as comfortably possible. Keep the cap on their hair for at least eight hours. Wash the person's hair with shampoo. This should clean the smothering agent from the hair. For greasy substances like petroleum jelly, using kitchen soap can be effective. Comb the hair with your lice comb. Remove dead bugs and eggs. See Get Rid of Head Lice Naturally for tips on using the lice comb. Wash hair once more. | Gather your smothering product. Prepare your workspace. Keep safety in mind. Place an ample amount of the product on the person’s hair. Take off the shower cap. |
This way you will have a list of what you need to complete. Before leaving school, make sure you understand the assignment. Ask your teacher for clarification about what you are supposed to do, when the assignment is due, and how it will be graded. Ask how long each assignment should take, so you can plan to budget your time. Tasks which are worth a higher percentage of your grade or that are more challenging should be completed first. Look at your assignment list. Rank each assignment in terms of importance and level of difficulty. Plan out how much time you need to spend on your homework for the evening. Decide in what order you will complete your assignments. Most students have between 1 to 3 hours of homework every evening and often finish their homework when they get home. If you have after-school activities in the late afternoon, you will need to set aside a different time. Plan to sit down and start your homework at a specific time. Budget enough time for each assignment. Plan to take a 5-minute break between major assignments. Most people can't concentrate for hours and hours on end. | Write down all of your assignments in your notebook or planner. Prioritize your assignments. Plan your time. |
Pruning the plants while they’re young will allow you to help shape how they grow. Once the herbs have a full set of leaves, they’re old enough to be pruned. For many herbs, you can begin pruning them once they're roughly 6 inches (15 cm) tall. Pruning your herbs will make them sturdier, allow them to grow more leaves, and prevent them from becoming too bushy or top-heavy. Locate the spot where the branches and leaves meet the main stalk. Use clean scissors to make a cut right above the set of leaves. This cut will allow 2 new stems to grow from that spot, giving your plant more volume. You can use your fingers to prune delicate plants. Make sure you don't rip off stems, as this can lead to disease. This will leave a solid base for the plant to grow from. You can trim the plant right above the 1st or 2nd set of leaves when pruning the side stems that will grow from that initial cut. This is an especially helpful way to grow herbs like basil abundantly. Thicker herbs like thyme, rosemary, and sage don't need to be pruned very often unless you want to harvest them frequently. Simply pruning them when you see dead leaves or at least once a year should be enough. Woodier herbs are herbs with hardier stems and leaves, as opposed to delicate herbs with thin stems like basil or cilantro. Try to always prune away leaves before they start to flower. Removing flowers will redirect the energy into leaf production. Remember to prune right above a set of leaves. | Prune your herbs in their early stages. Make your cut right above where the branches intersect the stalk. Cut above the 3rd set of leaves the first time you prune. Trim woodier herbs roughly once a year. Remove flower buds from herbs when you first see them. |
If the dog is wearing a collar take a look to see if it has a specific tag that says the dog is microchipped. Microchips are made by different manufacturers, and these companies usually issue a metal tags to place on the dog's collar to alert interested parties that the dog is chipped. The tag is supplied in part to let anyone that finds a dog know that it is chipped in order to scan them but it is also a visual deterrent to potential thieves thinking of stealing the dog, since the dog has permanent ID as belonging to someone else. If the dog does not have an official ID tag on their collar, look for a bespoke collar tag bearing wording such as "I am microchipped" or "microchipped." Know that this is not the same as a tag engraved with the dog's name and phone number. The purpose of this tag is purely to alert the finder that the dog is chipped and should be scanned. This type of tag usually does not carry personal details. If the dog has lost their collar or there is no tag on the collar, try gently feeling for the presence of the microchip. The microchip is encased in a perspex coat that is the size and shape of a grain of rice. Microchips are injected under the skin in the loose skin of the neck at the centerline between the shoulder blades. Therefore this is the ideal place to start feeling. Run your fingertips over the skin between the shoulder blades and neck. Apply gentle pressure to see if you can detect a firm rice-grain sized object just under the skin. Microchips do bed in, which means they can migrate slightly from the original implant site. To reduce the chance of missing a microchip, work in a methodical manner working up and down between shoulder and head and then left to right working side to side from the shoulders up the neck until every inch is covered. This is not a foolproof method. If you can't feel a chip it does not mean the dog is definitely not chipped because the chip may be present but have shifted location or is embedded too deeply to feel. Even if the dog doesn't have a tag that says it has a chip and you don't feel one, it's best to scan the dog to find out. It is worth scanning for a microchip if you are trying to get the contact details of a lost dog's owner. Microchips show up on x-ray. While this is not routinely used as a method to check if a chip is present, in cases where a chip was implanted and has stopped working, taking a radiograph of the dog is a quick and easy way to check the chip is still in place but not working. | Look for a tag on the dog's collar. Feel for the microchip. Get a definitive answer by getting the dog scanned. X-ray the dog. |
two times a day. Brushing is important and it shouldn't be skipped or rushed. When you brush, do so for at least two minutes. This will give you time to thoroughly clean each tooth. Replace your toothbrush when it gets worn out. After about three months the bristles get permanently bent and they don't clean as well — in fact they get also sharpened and will hurt your gums making bleeding easier. A new toothbrush will keep your teeth clean and sparkling. If you use an electric toothbrush the head should also be replaced every three months. Children should start brushing as soon as they get their baby teeth. Baby teeth are also vulnerable to cavities and the brushing will teach them how to take care of their teeth for when they get their permanent teeth. You can also bring a toothbrush to work or school and give your teeth a quick brush after lunch. This will prevent bits of food from sticking in your teeth and giving you bad breath. But don't brush immediately after eating. Wait a half hour first. The food in your mouth produces acid which softens your enamel making the enamel vulnerable to being worn away. Fluoride is important because it increases the strength of the enamel on your teeth. This helps protect your teeth from decay. Look for a toothpaste brand that has 1,350–1,500 ppm of fluoride in it. Children can brush with it, but an adult should supervise them to make sure they don't swallow it. Only use a pea-sized amount of toothpaste for children between two and six years old. Children's toothpaste doesn't always contain enough fluoride to be effective in preventing tooth decay. It needs to have at least 1,000 ppm of fluoride. Put a small blob of toothpaste on the brush and then brush it over all surfaces of your teeth. Spit it out afterwards instead of swallowing it. Flossing removes food particles, plaque, and bacteria that build up between your teeth. When you start flossing, your gums may bleed a little bit, but after few days that should stop. It is best to floss before you brush. The floss will then scrape the sides of your teeth clean, making it easier for the fluoride to get in and strengthen the enamel there. Use about 18 inches (46 cm) of floss. Wrap it around one finger on each hand, and then gently slide it between your teeth. Curve the floss around one of the teeth and move the floss up and down along the tooth. Don't press too hard when you go below the gum line. It shouldn't hurt; however, you can expect a slight bleeding which is absolutely normal. This also relieves the micro inflammation created in the papilla Some people find floss to be awkward. If this is the case for you, try using an interdental cleaner. This is a small brush, pick, or stick that lets you get between your teeth without dealing with long strings of floss. Mouthwash can kill bacteria and keep bad breath under control. You can buy different commercially prepared solutions or make a salt solution at home. Swish the mouthwash around in your mouth for at least two minutes. Dissolve about a half a teaspoon of table salt into a cup of water. The salt will dissolve faster if the water is slightly warm and you stir vigorously. Check the ingredients on commercially prepared mouthwashes. Some have antibacterial properties or fluoride in them. The flavors can be strong, so choose one you can tolerate. Even if you use mouthwash, you still need to brush. You can also put mouthwash in a water pick and use that to more thoroughly clean between your teeth. You can do this with a tongue scraper. Many toothbrushes have tongue scrapers on the back of them. If you need to, you can even brush your tongue with the bristles of your toothbrush. Cleaning your tongue will remove food particles and bacteria that are on the surface of your tongue. Scrape lightly from back to front along your tongue, being careful not to gag yourself. Rinse your mouth out when you are done. Don't swallow the bacteria that you have scraped off of your tongue. Smoking increases your risks of mouth cancers, gum disease, and it gives you bad breath and stains your teeth. It can also decrease saliva flow, which allows bacteria to thrive in your mouth. If you already smoke, quitting will improve your oral hygiene tremendously. If you need help quitting there are many resources available including: Hotlines, counseling services, and support groups Medical assistance such as medication, nicotine replacement therapy, and residential treatments | Brush Use a fluoride toothpaste. Floss daily. Use mouthwash. Clean your tongue. Don't smoke. |
Get out one 11-ounce (308 g) package of goat cheese. Cut the goat cheese vertically, so you get about 12 thin rounds of cheese. Set the cheese aside while you make the sun-dried tomato and garlic marinade. Try to slice the cheese while it's cold. This will make it less crumbly when you cut it. Turn the oven on to 350 degrees F (180 C). Poke 5 large cloves of unpeeled garlic with a small knife. Put the garlic in a small saucepan and drizzle them with 2 tablespoons of the olive oil. Put the garlic in the preheated oven and bake it for 20 minutes. The garlic should become soft and fragrant. Put 5 sun-dried tomatoes into a heat-proof bowl and pour boiling water over them. Pour enough water to completely cover the tomatoes. Let them soak for about 15 minutes before you drain them. Pat the soaked tomatoes dry using paper towels. The sun-dried tomatoes should plump up and become soft once they've finished soaking. Get out one 8-ounce (226) jar. Place one sun-dried tomato, one peeled garlic clove, and one sprig each of fresh rosemary and thyme into the jar. Pour half of the oil from the garlic pan into the jar and set one slice of cheese in it. Pour the rest of the oil from the garlic pan over the cheese. The oil will be flavored from the garlic that roasted in the pan. Continue to layer the jar with the herbs, oil, and cheese until you've used all of the cheese and four more sprigs each of fresh rosemary and thyme. Get out 1/2 cup (120 ml) of olive oil and pour enough in the jar to fill it to the top. Don't worry if there aren't distinct layers of herbs and cheese. Put a tight lid on the jar, so it's completely sealed. Chill the goat cheese for a few days before you plan on serving it. When you're ready to serve it, open the jar and gently scoop out the cheese. You can marinate the cheese for up to one week. The flavors will intensify the longer it marinates. | Slice the goat cheese. Roast the garlic. Soak the sun-dried tomatoes. Assemble the jar of marinated cheese. Layer the rest of the ingredients. Marinate the goat cheese. |
Brush or comb your hair until it's tangle-free. Pay special attention to the back of your head, since this is the part you will be braiding, and it also is the section of hair that is the most prone to knots. Separate your hair into three sections, with one long, thin rectangular section down the middle of the back of your head, and the rest of your hair on either side. Make sure that the section in the back is parted straight, as the part may be visible. Flip the two side sections of hair over your shoulders and out of your way. Then take the back section of hair and divide it into three strands. These are the strands you’re going to use to create your braid. Do one stitch of a braid by crossing the left strand of hair of the back section over the middle strand. Then cross the right strand of hair over the middle section. Before you make the next stitch, add hair to one of the side strands of the section you’re braiding from one of the loose sections. Then do one stitch of the braid, incorporating this hair. For the next stitch, add hair from the other section of hair into one strand of your braid. For instance, if the last time you added hair from the left section, this time add hair from the right. Create one stitch of the braid. Keep doing a Dutch braid, adding hair alternatively from the right and left sections to one strand of the braid. Keep braiding until the braid reaches the nape of your neck. Use a thin elastic tie rather than a regular hair tie to secure your braid. This tie may be visible, so try to use one that is transparent or that is the same color as your hair. After you’ve finished the braid, take your hair and pull it back into a ponytail. Tuck the braid down so that it is at the bottom of the ponytail, with the rest of your hair around it. Tie with an elastic band, and your hair look is finished! You can also make a messy bun instead of a ponytail if you want a more tousled look. | Brush your hair. Divide your hair into three sections. Divide the back section of hair. Start the braid. Add hair to one strand and keeping braiding. Add hair from the other side. Braid until the nape of your neck. Secure the braid with a thin elastic tie. Gather your hair into a ponytail. Finished. |
Your doctor needs to know if you are having chronic issues with sleep. It is a serious issue. If you constantly oversleep throughout the week, you may suffer from headaches or back pain. Oversleeping affects the neurotransmitters in your brain and lead to headaches. Back pain can be caused from sleeping on a regular mattress for a prolonged period of time. There are also psychological side effects of oversleeping, including depression, anxiety, and drowsiness. Your doctor can treat these side effects by suggesting adjustments to your sleeping habits, your daily habits, or by prescribing certain medications. There are many medical conditions and disorders that can interfere with sleep. Let your doctor know about specific symptoms or patterns in your sleep issues. If you can't get up in the morning due to oversleeping, have difficulty staying awake while sitting still, fall asleep while driving, and require caffeine every day to stay awake, you may have a sleep disorder. There are four main types of sleep disorders: Insomnia: The most common sleep complaint and a major cause of oversleeping. Insomnia is often a symptom of another issue, such as stress, anxiety, depression, or another health condition. It can also be caused by lifestyle choices, like medication you take, a lack of exercise, jet lag, or your caffeine intake. Sleep apnea: This occurs when your breathing temporarily stops during sleep due to a blockage in your upper airways. These pauses in breathing interrupt your sleep, leading to many awakenings throughout the night. Sleep apnea is a serious, and potentially life threatening sleep disorder. If you suffer from this disorder, it's important to talk to a doctor and get a Continuous Positive Airway Pressure (CPAP) machine. This device delivers a stream of air to your airways while you sleep and can successfully treat the disorder. Restless leg syndrome: (RLS) is a sleep disorder caused by an irresistible urge to move your arms and legs. This urge usually occurs when you’re lying down and is due to uncomfortable, tingly sensations in your arms and legs. Narcolepsy: This sleep disorder often involves excessive, uncontrollable daytime sleepiness. It is caused by a dysfunction of the mechanism in your brain that controls sleeping and waking. If you have narcolepsy, you may have “sleep attacks” where you fall asleep in the middle of talking, working, or even driving. If your doctor refers you to a sleep center, a specialist will observe your sleep patterns, brain waves, heart rate, and rapid eye movement with monitoring devices attached to your body. The sleep specialist will analyze the results from your sleep study and design a custom treatment program. A sleep center can also provide you with equipment to monitor your activities while awake and asleep, at home. | Speak to your doctor about problems with oversleeping. Get tested for sleep disorders. Talk to your doctor about attending a sleep center. |
Windows will fail to uninstall a program if it is currently running; closing Chrome will prevent this problem from occurring. Click the Windows logo in the bottom-left corner of the screen. Click the gear-shaped Settings icon in the bottom-left corner of the Start window. This will open the Settings window. It's in the Settings window. You'll find Google Chrome in the "G" section of the list of currently installed apps. If you don't see Chrome here, make sure you're sorting by name by clicking the "Sort by" option and then clicking Name. You'll click Uninstall once under Google Chrome's name, then you'll click it again when it pops up above Google Chrome's name. This will allow Google Chrome to run its uninstaller. Doing so will prompt Google Chrome to uninstall. You may also want to have Chrome delete your browsing history by checking the "Also delete your browsing data?" box. If you see an error asking you to close Chrome, skip to the last step of this method and then try uninstalling Chrome again. If you're receiving errors saying that Google Chrome is still running even though you've closed all of its windows, do the following before attempting to uninstall Google Chrome: Press Ctrl+⇧ Shift+Esc to open the Task Manager. Click the Processes tab. Click Google Chrome in the main window. Click End task in the bottom-right corner of the Task Manager. | Close any open Google Chrome windows. Open Start . Open Settings . Click Apps. Scroll down and click Google Chrome. Click Uninstall twice. Click Yes when prompted. Click Uninstall when prompted. Force-quit Chrome if necessary. |
If your cat is still stuck to the trap, use scissors to cut off the hair stuck to the trap. Only cut the hair that is stuck to the trap. Be careful not to cut too close to your cat's skin. If the trap is too close to your cat's skin, then take your cat to the veterinarian to have the trap and glue removed. Pick up your cat and place it on your lap or a level area such as a table or bed. Some mousetrap glues have toxins that may be poisonous to cats. A towel will prevent your cat from licking the affected area and becoming accidentally poisoned. You can use vegetable, canola, olive, sunflower, or corn oil to remove the glue. Use your fingers to massage the oil into your cat's fur. Make sure the glue is completely covered with oil. Alternatively, massage peanut butter into your cat's fur to remove the glue. Avoid using eucalyptus, tea tree, or citrus oil to remove the glue since these are toxic to cats. Also avoid using solvents such as paint thinner or acetone to remove the glue from your cat's fur. The oil will soften the glue as it sets. The longer you let the oil set, the easier it will be to remove the glue. Gently wipe the affected area with the cloth. Wipe until all of the glue is removed. If glue still remains on your cat's fur, then repeat steps three through five until the glue is totally removed. | Cut your cat free from the trap. Wrap a towel around your cat. Apply a dime-sized amount of cooking oil to the affected area. Let the oil set for five minutes. Use a clean, dry cloth to wipe the glue away. |
It's hard to explain things to kids when you are unclear about information. Prior to having a discussion for children of any age, review information about menstrual cycles. Read materials written specifically for kids. You can also review diagrams of women's reproductive system and include diagrams in your explanation. The more comfortable you feel in your knowledge, the easier your explanation will be. You may want to check out a book on menstruation written specifically for children or share it with your boys. If the boy you're speaking with already has an understanding of where babies come from, this part will be easy. If he doesn't, it might be a longer conversation. Explain to him that every woman has a “baby center” called the uterus, which allows her to grow a baby. Each month, her body gets ready to hold a new baby. To do this, her uterus has to get extra strong, so it grows a lining. For example, a mother might say to her young son, "Every woman has a uterus, which is where babies grow until they are ready to come out. Every month, her body gets ready to have another baby and the lining of of uterus gets really thick so that it can catch an egg and hold on to it. If it's time to have a baby, the baby will grow inside the uterus." If he is having trouble understanding the concept, you might say the uterus is like a balloon inside a woman's tummy. By age 5, children should be comfortable with the official names of reproductive organs. If a woman doesn't have a baby inside, the uterus no longer needs the thickened lining created that month. The lining dissolves and is dispelled through the vagina as blood. The mother could continue with something like, “If a woman doesn't want to have another baby, this extra strong lining in the uterus goes away because she doesn't need it. That lining leaves her body as blood and goes out through her vagina.” Bring up that women wear tampons, sanitary pads, and menstrual cups to collect the expelled blood. Be sure to explain that this is lining the body made to support a baby leaving, and that the blood doesn't come from an injury. You can say, “Women choose how they want to collect the blood that came from the uterus and out the vagina. There are lots of ways to do this. Women do this to keep their clothes clean.” If the boy is older, you can talk about each product and what it does. | Increase your own knowledge about menstruation. Discuss the function of the uterus. Explain that bleeding occurs when there is no baby. Talk about menstrual products. |
On Windows 7, open your Start Menu and type “Notepad” in the search box. Select Notepad to open the application. You can also navigate to the "Accessories" folder in the Start Menu and select Notepad from the list of applications On Windows 8.1, type “Notepad" into the Start screen search box. Once Notepad is open, you will see a simple screen with a limited set of text editing options. Notice menu options for File, Edit, Format, View, and Help. You will see a drop down list with New, Open, Save, Save As, Page Setup, and Print. These are the basic options for word editing. Select “New” to create a document. Whenever you save a file with either Save or Save As, Windows will automatically save the file in .txt format, which will launch it in Notepad. You can choose to save Notepad documents in HTML by choosing Save As and selecting All Files from the list of choices, then saving the file with .htm or .html as its extension. Type your HTML code directly into your document as if you would plain text. In order to properly save a document in HTML, you will need to have Word Wrap enabled. You will find instructions on how to enable this feature a little later. Navigate to Page Setup from the File menu. You will see just a few simple formatting options. Choose your desired paper size, orientation, and header and footer options from this menu. Notepad includes a header by default, which is the name of the document and the date it was printed. The default footer text is the page number. You can remove these defaults by selecting the Header and Footer option from the File menu on the menu bar and deleting the codes inside. All header and footer setting must be entered manually each time you want to print a document. These settings cannot be saved. To change headers and footers, choose Page Setup from the File menu and enter the desired command(s) in the Header and Footer text boxes. The following is a short list of header and footer commands: &l Left-align the characters that follow &c Center the characters that follow &r Right-align the characters that follow &d Print the current date &t Print the current time &f Print the name of the document &p Print the page number Leaving the Header or Footer text box empty will result in no header footer on your printed document. You can insert words into the Header and Footer text box and they will print in their appropriate position. Letters after the "&" sign do not need to be capitalized. In Notepad, your header is centered, regardless of the formatting codes you use, if the formatting code is not the first item in the Header text box. For example, to align a title to the left side of the page, use &lTitle text. | Open Notepad. Explore the Notepad user interface. Open the File Menu. Format your page Setup. Add a header and footer. |
While it may be unavoidable, large family gatherings usually require a large space. Get away from any rude family members by simply changing locations. Be polite and greet him with a handshake and a smile; you're not obligated to engage in anything more. Stay out of earshot. Even if you change locations, you may still be able to hear something infuriating. Be sure to move into a room where his voice will be muffled or close the door of the room he is in. If it is a family member that you will see everyday like your sibling, schedule yourself to limit your time with him. For example, join extra-curricular activities after school so you won't have to be at dinner with your rude younger brother. Many times rude people are simply trying to get attention by eliciting a reaction. If you know what topics she enjoys evoking, avoid them by bridging to a more neutral conversation that won't require her opinion or reaction. For example, steer clear of her political views and talk about topics that you know she enjoys and remains positive about like her recent home improvements. Say something like, “That is a difficult issue that I'd like to read more about before I place my vote. Speaking of reading, I read an article on how to build a really great deck. How long did it take you to build yours?” If it is a family member that you have to interact with every day, keep cordial. Talk about common interests or dislikes to form a bond. Depending on the size of the family gathering, there may be opportunities to break away and start an activity. Large family gatherings may need people to help supervise children, prepare the meal, or clean the location. Delegating a job that he enjoys will keep him occupied. For example, ask for help with your car, home renovation tips, or playing sports with the kids. Be careful not to include him in an activity where he could offend more people. If you ask him to participate in activity with a lot of social interaction, you could be fueling a volatile situation. Keep busy around the house or take up a new hobby to stay away from any rude siblings. Better yet, fuel the interest or support the hobby of your rude family member. For example, if your rude brother likes a certain type of book or video game, buy him several of that genre to keep her occupied. | Go to a different location. Change the topic if you get into an uncomfortable conversation. Distract him with an activity. |
This recipe can also be made with uncooked rice, though it takes much longer. Just make sure there's enough room in the pot for plenty of water, too. You can also make this dish with a rice cooker or in the microwave. With those, times may vary. Essentially, congee is just cooked rice with much more water, allowed to stew. As most rice porridge is used to get rid of leftover rice, measurements are not a standard of this timeless recipe. However, with cooked rice, you want about twice as much water – enough to cover the rice and then about an inch more. If the rice is uncooked, you’ll need about 4 times as much water. The rice expands and absorbs the water while cooking. Broth is good if you're looking for a richer, more savory taste, but it's hardly necessary. Keep stirring to nudge the grains apart and to give it a smooth consistency from the get-go. Once it reaches a boil, bring the heat down to low and let simmer. Cover your pot, resisting the urge to check it more than once or twice. The more you open it, the more the steam and heat escapes, slowing the process. Be sure to break up the eggs with a fork or you might end up with bits of yolk floating around in your porridge. In traditional rice porridge, the eggs are blended right into the porridge, giving it flavor instead of texture. Congee, or rice porridge, isn't about rice porridge with bits of scrambled egg floating about. To be sure it'll turn out smooth, whisk up the eggs beforehand and then add to your porridge. As the broth or water breaks down the rice, slowly it will start to congeal and become one mass. The grains will smooth out and the water will seem the thicken. If you see this, you're on the right track! Be sure to keep stirring – it's best that it's all cooked evenly and nothing is left to harden on the bottom of the pan. Soy sauce is a very common addition to congee, and some people like to add a little kick with chili sauce or Sriracha. | Place leftover cooked rice into a large pot. Cover with water or broth by about one inch. Bring it to a boil and then simmer for 10 minutes. Add the eggs. Keep stirring until the porridge is gelatinous and smooth. Add soy sauce or other condiments, if you’d like. |
Transfer the shrimp from their containers to a colander, placing a plate underneath to catch water. Let the shrimp thaw on your kitchen counter or in the fridge, depending on the room's temperature. It is safe to thaw shrimp at room temperature for up to 2 hours at a time. If you need to thaw shrimp quickly, turn on your sink's faucet to warm water. Leave the shrimp under the warm water until they become soft to touch and have thawed completely. You can store shrimp for up to 2 days in the fridge after thawing it without worrying about spoilage. If possible, thaw shrimp immediately before you plan to cook it. Avoid refreezing the shrimp afterward, as freezing and thawing shrimp multiple times can ruin their taste. | Place the frozen shrimp on a colander and leave them to thaw. Thaw the shrimp under running water for a faster alternative. Cook or refrigerate thawed shrimp within 1-2 days. |
Don't spend time with anyone who is negative all the time. This will make you feel bad about yourself and the world around you. You don't want that in your life! Instead, spend time with people who understand that sometimes life is hard or sometimes people make mistakes but that things are largely good and should be appreciated for what they are, rather than held up to a standard they can never reach. If you have a close friend who acts like this, try to help them change. If they continue to act this way, try to spend less time with them. It's hard but being around negative people is very unhealthy and will not help you build a good image of yourself or your life. If you find yourself acting this way: stop. You don't want to be that person. If there are bad things in your life, things you feel negative about, change them. Don't complain and focus on all the bad things... make those bad things into better things! Don't spend your time thinking about regrets and all of the times you did something wrong or failed in some way. Learn from those mistakes and move on. Instead of focusing on things you didn't do right, remember all the things you excel at. Remember all the good things you’ve done. This will help you remember that you do good work and can accomplish great things when you try. Make a list of the things you are most proud of. Post it on your bedroom wall and look at it every day. This will motivate you to keep doing good things to make that list longer and longer. See if you can get it to reach down to the floor or be taller than you are! There is a saying that nobody is perfect and it is absolutely true. Nobody is perfect. Nothing is perfect. Perfection isn't a real thing. This means that you need to stop trying to be perfect. In trying to be perfect you will only constantly disappoint yourself. It's good to strive for something but this is the wrong way to do it. Instead, think about where you are and try to take it to the next step. Strive for getting a B on that next test before trying to get an A. Sometimes you’ll surprise yourself and do better than you thought you would! Tell yourself every single day that you’re a good person. You have something to offer the world. You can do things that no one else can do. You can handle all the challenges that life throws at you. You can be better and happier. You will love others and you will love yourself. You will always do your best. All of these things are true if you let them be true. You just have to be willing to put in the work. Remind yourself that these things are true every day and you will feel better about yourself and your abilities. Sometimes it may not feel like these things are true or possible but they are. If you feel like you don't have anything unique to offer to the world, then you just haven't found out what it is yet. If you don't feel like you’re a good person, give yourself the opportunity to be. Sometimes it takes work to change the things we don't like about ourselves, but if you try you will find that with time you can make yourself into a person that makes you happy. | Avoid negative people. Concentrate on accomplishments, not on failures. Remove the idea of perfection. Practice self-affirmations. |
. Oftentimes, your capacity for fun is inhibited by insecurity. People believe that, at a certain age, they must be serious about life or others will judge them. Try to leave your inhibitions behind and embrace fun in your daily life. Other people probably do not think about you as much as you believe. Most people are caught up in their own lives and priorities and will probably not judge you for having a capacity for fun and silliness. Remember that you can't actually control what other people think of you. You can do everything "right" and other people may still judge you. There's no point in trying to change your behavior to fit what you think others want you to do — they're going to think whatever they think, and you have no control over it. Focus on your own path, not what you think others want or expect from you. You do not want to impress people who are judgmental, anyway. It's in your benefit to seek out people who like you for you. If people judge you for making fun a central part of your life, do not worry about these people. They probably have insecurities they project onto others. Many people do not think of fun as an important part of life. Levity, humor, and play are vital to your emotional wellbeing; therefore, take no shame in making fun a priority. Sometimes, you need to make time. Obligations of work, family, and other activities can often take up a lot of hours in a day. Work on scheduling a block of time each day to do something you genuinely enjoy. Do not think prioritizing fun is a form of laziness. Life entails a lot of pressure and hard work. Everyone is entitled to have fun, and you should feel no guilt making time for this. ave fun without spending money. Money is a major reason people struggle to have fun. People may think they need money to have fun. You may think, for example, you need to buy expensive sports equipment to join a sports league, or drop money on pricey electronics to watch a movie or listen to music. This is not the case, and overspending may create feelings of anxiety. Embrace cheap ways to have fun in your day-to-day life. Have fun by being around people you enjoy. You don't have to spend a fortune having a group of friends over or getting a cup of coffee with your favorite co-worker. You can also look for cheap ways to have fun around your hometown. Maybe the local theater troupe puts on free shows in the park. Maybe a local museum allows visitors in for free some days. You do not have to plan fun. Many people get caught up in planning and scheduling fun activities. This may create more anxiety, and can lead to disappointment if things do not go as planned. Learn to embrace spontaneous moments, and let fun happen without trying to control it. Try to be present in the moment. Enjoy what is happening around you, and allow conversations and laughter to happen on their own. Embrace spur of the moment activities. You may need to adjust your schedule slightly to take that last minute weekend trip with your friends, but it will be worth it for the fun you will have. In addition to making your life more fun, humor can help you better cope with stress and anxiety. Actively work on laughing more in your day to day life, and try to make those around you laugh as well. You do not have to be a brilliant comedian to embrace laughter. Most people are capable of repeating jokes they hear and telling funny stories. Learn to laugh at yourself and the irony of life. Sometimes life does not go as planned, or unwanted things happen. Learn to find humor in the randomness of life and to laugh, pick yourself up, and move on. Those who are able to laugh at themselves tend to be more cheerful, optimistic, and resilient. You can even try sharing funny content with others. Send a friend a funny YouTube video. Share a funny article on your Facebook page. | Do not worry about other people's opinions Prioritize fun. . Allow for spontaneity. Learn to laugh. |
One of the most important skills to master to improve your ability to score goals is shooting leg flexibility. By learning to shoot the ball with either foot, you increase your chances of scoring a goal. You will not have to set up the shot to hit the ball with your dominant foot - you can hit the ball as it is. Train your non-dominant foot by drilling with it instead of your dominant foot. The only way to learn how to shoot with both feet is to train both feet. At first, it will be uncomfortable and your technique will be terrible. This is to be expected. Continue pushing yourself and using your non-dominant foot to take shots, to dribble, and to do everything else. Juggle with your weak foot by letting the ball bounce and then kicking it up with the laces on your weak foot. Alternate touching the ball with the out-step of your foot, then the instep, over and over until you build rhythm and speed. Practice trapping the ball with your weak foot, increasing the intensity as you improve. Pass with your weaker foot, starting off with passing against a wall and then finding a partner and passing the ball back and forth. After you've done these things and gotten some control with your weak foot, try shooting with your non-dominant foot. This skill takes practice and patience. You will not train your non-dominant foot overnight. It will take weeks of practice. Do not give up - your hours of practice will pay off at the end. During the time it takes for you to set up a shot with your dominant foot, the other team can swoop in and steal the ball. Being able to kick with your non-dominant foot doesn't give the opposite team time to steal. As a goal scorer, you want to be able to put the ball into the net with either foot and with any part of the foot. Just like being able to shoot with either foot gives you flexibility, learning to shoot with all parts of your foot does the same. Learning how to use any part of either foot means you can shoot with just about any set up. To develop good technique with all of your foot, practice dribbling, passing, and shooting with all six parts of your foot - insides, outsides, heels, toes, instep (laces) and soles. Devote time to practicing only with certain parts of your feet during every practice session. Since soccer is a fluid game that is constantly changing, you can't hope for the same situation you found yourself in when you practiced. You need to be ready for anything the game throws you. Do this by practicing shooting control, ball technique, accuracy, and direction. Complete target practice and drills and technique execution drills. Make sure your practice sessions are intense and aggressive enough to prepare you for situations you will face in a game. You want to practice in all sorts of situations to improve your technique, your ability to anticipate, and your adaptability. Shooting goals into an unguarded net is easy. You need to get used to shooting and aiming with someone trying to block your shot. In addition to practicing with goalies, practice with defenders. Your practice sessions should teach you how to perfect your technique, accuracy, and control while other players are trying to steal the ball and block you. Try shooting partners. Go through shooting exercises with someone else to improve your technique. Critique each other and try to fix any weaknesses. Remember to practice all of the shooting techniques - you want every skill possible so you can be the best player. Start by perfecting technique. This may mean you practice alone against a wall, or with a partner. You should practice shooting into a goal without a goalie to get the hang of it. Add more difficult obstacles as you improve. Just before you get to the ball, look at the goalie to see where he or she is. Keep your non-kicking foot alongside the ball. Square your hips towards where you want the ball to go. Your eyes should remain down and focused on the ball when you're striking. Keep your knee and head over the ball. Make sure to make contact with the middle or top half of the ball. | Learn to shoot with both feet. Learn to put the ball in the goal with any part of your foot. Perfect your shooting technique. Practice against pressure. Practice with a goalie and defenders. Develop these skills slowly. Get the best shooting stance. |
The gold standard when treating a UTI with antibiotics is to perform a test culture to analyze antibiotic sensitivity. Antibiotics are a family of drugs that either inhibit the growth of bacteria or kill them, depending on the type of antibiotic. A test culture tells your vet exactly what bug is present, and which antibiotics are effective against it. Using targeted antibiosis reduces the risk of inducing antibiotic resistance in bacteria and is the best way to treat an infection. However, it is not always possible to get a large enough urine sample to culture or else the cost of culture may be prohibitive. In some cases, the cat will be started on a proven antibiotic that can then be adjusted once the culture results are ready. It is especially important to culture the urine if the cat has recurrent UTIs. In this case, it is likely that the cat either has a mixed infection where only some of the infection is being killed, or the infection is resistant to the antibiotic being used. Broad spectrum antibiotics kill a wide range of bacteria. If a cat has never had a urinary infection before, then it is acceptable to put him on a course of broad spectrum antibiotics that kill a wide range of bacteria commonly found in urine. Typically, these antibiotics are penicillins, such as amoxicillin, clavulanic acid, cephalosporins, or sulphonamides. You will need to go to your veterinarian to get a prescription for antibiotics. The bladder produces a layer of mucus-like material that acts like a bandage to protective the lining from noxious substances in urine. When a cat has a UTI, this glycosaminoglycan or "GAG" layer becomes thinner, exposing the bladder lining to irritation. Neutraceuticals such as glucosamine, may help to replenish this GAG layer and make the cat more comfortable. Although research into the benefits of glucosamine is inconclusive, it may help and is unlikely to hurt. There are several over-the-counter preparations available, such as "Feliway Cystease" that contain glucosamine and tryptophan. Ask your veterinarian if they will approve starting this supplement. | Get a test culture done to identify and use effective antibiotics. Treat your cat with broad spectrum antibiotics if a culture is not possible. Use glucosamine to stimulate the cat's GAG layer. |
As mentioned above, there are parts of the game that require you to fight zombies or defend the other survivors. If you fail to fight off the zombie, you will end up with a short game over cutscene and will have to start over from the beginning of the panic event. Lee has a unique death cutscene for each panic event. The tap button mode is when a button appear on the bottom of the screen and you must tap that button repeatedly as fast as you can. When you've tapped it enough, it will then quickly switch to a different button (e.g., A changed to X), and you should press the button repeatedly until you have escaped the danger. In the mobile and Kindle versions, this mechanic is changed to sliding your finger in the direction that an onscreen arrow indicates. If you are too slow or press the wrong button, you will fail the panic event and die. You will then have to start over from the beginning of the panic event. There are instances that the zombie gets too close and you cannot move. It's typical of a horror game for a zombie to grab your character's leg for more thrill. In this part, you have to kick it in the face before it gets to you. Players are required to aim at the zombie or enemy first before you can actually kick them off. On mobile or Kindle versions, a reticle will appear, indicating where to tap. X button is usually used for this mechanic since that triggers the action. Failure to kick in time will result in a game over. In the middle of the story, you will be able to acquire items that can be used as a weapon. There are zombies that can be only defeated using certain items, so it's best to explore a certain area before leaving it. Missing an important item may make prevent progressing to the next part. To use an item, simply choose the item icon when you point the game cursor at the desired location. You can use items on walkers or other items in the overworld. In some situations, you may have to crawl or walk away to escape walkers pursuing Lee. To survive this type of panic event, simply outrun or outcrawl the walker until a different action can be taken. If you're unsure with the decision, or regret a decision after you've made it, you can always reload the game and try again. | Tap the button. Kick the enemy. Use an item. |
You can use a smaller elbow adz for more control. Gradually cut and smooth the ends into your desired shape. At this point, your canoe probably still looks boxy. You can cut the top sides into a gentle swoop to reduce the weight of your canoe and give it an elegant look. Although you've removed the bulk of the wood from the center of your canoe, you still need to take a smaller knife, adz, or axe and clean up the edges. Try to make the center as uniform as possible. Remember not to remove too much wood from the bottom or you might cut a hole. Use heavy grit sandpaper and rub your sandpaper over the entire surface of your canoe. Work the sandpaper with the grain of the wood. Be sure to blow away any sawdust before sealing your canoe. Use a spar varnish and apply multiple coats. Be sure to use a light sandpaper in between coats. This will help your varnish layers stick. Follow specific package instructions on your varnish and be cautious when using. Wait for your varnish to completely dry and seal before taking your canoe to the water. | Shape the ends. Cut the sides of the canoe. Detail the center of the canoe. Sand your canoe smooth. Seal the canoe. |
Though snails may be out at any time, they are primarily nocturnal. This is because snails are susceptible to drying out in direct sunlight. Most snails go out searching for food when it's dark out (or at least darker than usual), so that would be the best time to find one. If at all possible, try to go looking for snails in the evening or on dark, overcast days. Snails can live in many different places, but most terrestrial snails live in shaded, damp areas. If there isn't much shade available, many snails will burrow under hard objects that remain cool and damp away from direct sunlight. Some common snail habitats include: rocks debris flower pots wooden planks on the ground damp, shaded areas weedy or leafy areas close to the ground One telltale sign of a snail is the viscous, sticky trail of slime it leaves in its wake. If you're having a hard time spotting snails, you might have more luck if you search for their slime trails and follow a sticky streak to the snail itself. Slime is usually left in silvery streaks across dry surfaces. You might see a slime trail on rocks, dirt, pavement, or on vertical surfaces like trees and walls. | Search at the optimal time. Check common snail habitats. Look for a slime trail. |
This proposal will be the brief that your boss will use for reference so make sure it's carefully written and includes your research and reasons. Create a synopsis that briefly describes your mission, along with the strongest points and research. Develop a one or two page synopsis that addresses the general idea behind your proposal. Include some of the most powerful pieces of research to punctuate your point. Develop a comprehensive paper that outlines why you believe online surfing will enhance productivity, how it will be beneficial, who will benefit most and how it could executed. | Develop a proposal surrounding your independent research and employee insights. |
A cucumber, egg, olive oil and vinegar mask is a good option if you want to deep-clean the skin of your face. To begin making it, wash a cucumber, then cut off a quarter of it and peel it using a vegetable peeler. Slice the cucumber quarter into a few pieces to make it easier to blend. Then drop these pieces into a food process or blender. Crack an egg into a small bowl, then use a spoon to spoon out and remove the yolk from the egg whites. Be careful not to break the yolk as you are removing it. Drop the egg yolk into the food processor and dispose of the egg whites, or save them for use in cooking. Measure out and add a teaspoon of apple cider vinegar to the food processor, as well as two tablespoons of olive oil. Use the puree option on your food processor or blender to mix all the ingredients for the mask. Stop when the ingredients are blended together. | Peel a quarter of a cucumber. Cut the cucumber quarter into a few pieces. Separate the egg yolk. Add apple cider vinegar and olive oil to the food processor. Puree all the ingredients in a food processor. |
You might be shocked or surprised to hear your relative saying something outrageous or crude. When your relative loses their filter, don't react in shock, anger, or even ridicule. Gently let your relative know that their behavior is inappropriate and move on. There's no need to bring up an incident once it has passed and you’ve dealt with it in the moment. For example, say, “It's not appropriate to speak of people in that way. We do not talk like this.” In some cases, it may even be appropriate to ignore the comment and not respond at all. However, this may not be a good strategy for someone who is suffering from a cognitive decline. If the situation is uncomfortable, gently guide your relative somewhere else. Speak calmly and directly to your relative as you travel elsewhere. You may also notice certain situations that target their inappropriate behavior and divert their attention prior to them seeing something or someone. If you know your relative has a tendency to say inappropriate things during certain events or situations (like being in a large crowd or around young children), guide them away ahead of time to prevent the situation from unfolding. For example, if your relative is saying something racist while at the grocery store, direct them to a different aisle or exit the store. If you’re feeling like the stress of dealing with your older relative is getting to be too great, take a quick break to de-escalate. Take a walk or go outside and get some fresh air. If you’re getting frustrated with your relative or need some time to cool off, remove yourself from the situation temporarily. Excuse yourself from the room and go somewhere else. You may wish to prepare a snack to help you get away and return later. Relatives have a way of saying things when others are nearby. It's up to you how you handle the situation. You can apologize for their behavior (“I’m so sorry my aunt said that to you”), clue them in, (“Sometimes my grandmother says inappropriate things due to her dementia”), or laugh it off (“All those years of embarrassing my uncle as a kid have come back on me!”). However you choose to handle the situation, think about what your relative would want. For example, if your relative has always valued privacy, they may not appreciate you saying things about their condition to strangers. However, if your relative has often valued humor and lighthearted joking, consider taking the statements in stride when out in public. | Respond to the remarks. Guide them away. Take a small break. Respond to onlookers. |
If you’re dealing with an infection, getting plenty of rest will help your body recuperate. You will probably still have responsibilities to take care of, but try not to push yourself beyond what absolutely needs to get done. If you have a bacterial sinus infection, you may need and antibiotic as well as mucoactive agents to dry up the mucus, such as Mucinex. Drinking an adequate amount of water daily will cause mucus to lose its thickness and help clear the nasal passages. Caffeine-free tea and soup are common cold remedies for this reason. Try sipping on peppermint tea or eating some pineapple. The menthol in peppermint and the bromelain in pineapple might help to reduce the coughing mucus causes. Caffeinated and alcoholic beverages, by contrast, can increase mucus production and dehydrate the body. Wet a clean washcloth with warm water and squeeze out the excess water. Then, cover the nose and cheeks with the hot washcloth compress. The heat from the washcloth will loosen the mucus and reduce the pain caused by congestion. Heat will help dilute the mucus (which is mostly solid in nature), resulting in easier release when you blow your nose. The steam from the shower opens up your nasal passages, which allows mucus to pass through easily. Taking warm showers will also help dry up mucus because the steam is able to open up the nasal passages so that mucus can easily pass through. Remember that during nasal congestion the nasal passages are all blocked up, and steam works with heat to thin the mucus, allowing for easier mechanical release. Steam inhalation also works — boil a pot of water, then remove it from the heat. Get a blanket or any cloth that can cover your face and the pot of boiling water, and inhale the steam so that it can loosen the mucus. Be very careful not to burn yourself on the pot or the hot steam; keep your face at least 12 inches above the water. Try adding a few drops of essential oils such as tea tree oil, peppermint oil, or eucalyptus oil to help open up your sinuses. You may also find that using a humidifier helps ease your symptoms. | Rest. Increase your fluid intake. Apply a hot compress. Take a hot shower. |
A well-organized piece of writing should have a clearly-defined structure. While the nature of that structure will vary depending on the type of writing, most written works should have: An introduction that briefly summarizes the topic or introduces the theme of the piece in some way. A body, in which the major points of the text are laid out. A conclusion, which wraps up the text and ties up any loose ends. Paragraphing refers to the arrangement of sentences into coherent groups. Each paragraph should focus on a single theme or idea, and should be visually separated from the previous paragraph with an indentation or an extra line space. A strong paragraph should include: A topic sentence, clearly expressing the main idea of the paragraph. A few sentences supporting, explaining, or elaborating on the main theme. Some type of transition that links the current paragraph to the theme of the next paragraph. A good piece of writing should present its points in an order that makes sense. While there is no single right way to order a piece of writing, the writer should at least have some kind of clear organizational scheme in place. For example: In a narrative, the writer might present events in chronological order from earliest to latest. For an argumentative essay, the writer might start by presenting their strongest evidence and end with their weakest. In order for a piece of writing to be coherent, there must be a logical flow of ideas from one clause, sentence, paragraph, or section to the next. Transitions are used to clarify variety of links between ideas, such as causative relationships, temporal relationships, or similarities and differences. Transitions can also be used to link a topic to supporting examples or evidence. Look for the effective use of transitional words and phrases, such as: “Therefore” “On the other hand” “However” “Furthermore” “Likewise” “For example” “In conclusion” | Look for a clear beginning, middle, and end. Assess their use of paragraphing. Make sure their ideas are ordered in a logical way. Check for clear transitions between ideas or sections. |
If you wish to add new tropical fish to your fish tank, you should discuss the process with an expert at your local pet store or ask your veterinarian. Many fish are territorial and may exhibit possessive behavior if they are housed in a crowded tank. A veterinarian or expert will be able to help you decide what type of fish will be compatible with your fish tank and what type of fish will happily co-exist with the creatures already living in the tank. Angelfish, for example, can be aggressive fish. They may exhibit territorial behavior toward particular types of fish, and they may even be aggressive toward their smaller tankmates. Serpae tetras, another type of tropical fish, can also be a bit of a bully. They often nip at the long, flowy fins of other fish, such as Angelfish and betta fish. Serpae tetras typically get along with other, similar-sized tetras and bottom-feeder fish. It is important to research the type of fish you would like to add to the tank, particularly how large the fish will grow. Be sure that your tank will provide enough room for the fish's growth and that it will adequately house it once it reaches its full size. Use a testing kit to check the quality of the water. These kits can be found at your local pet store and include testing strips and a key to help interpret the water levels. The chlorine level in the tank should be at zero before you add new fish, and the pH balance should be equal to the pH balance of the water where you purchased your new fish. Tropical fish thrive in waters that are between 76° to 80°F, or 25° to 27°C, so using a tank heater and having a thermometer are crucial. Some species require that the temperature be adjusted slightly, so be sure to find out the proper temperature for your new fish. A submersible or a hang-on heater can help regulate the water temperature, which is particularly important during colder seasons. Be careful not to overheat the water in the warmer months. Use a stick-on tank thermometer to check the temperature regularly. When transporting the fish home, it is important to take a light cloth or towel with you so that the bag can be covered. This helps minimize the stress a fish can experience when being transported to a new location. Also, be sure to keep the journey home as short as possible. Getting the fish safely transported in a reasonable amount of time will help lessen the stress and trauma. | Ask an expert. Research how large the fish will grow. Check the water quality. Monitor the water temperature. Transport your new fish safely. |
This method covers Word 2003 for Windows, Word 2008 for Mac, and all earlier versions. Click on Insert in the toolbar and select Text Box from the drop-down menu. Click the box and type to enter text. Click and drag on the outside lines of the box to move it; click and drag on the blue circles and boxes to resize it. This will allow you to format the box separately from the rest of the document. A dialog box will pop up giving you the option to change the text orientation. These older versions have inconsistent text rotation features. If this doesn't work or you don't see the option, move on to the next step. Click Insert → Picture → WordArt on the top menu. Type in your text and select an art style. You will not be able to edit this text, since it will turn into an image. Click the image that was just created and a border will appear. Look above the top side of the border for a small line leading to a circle. Click and drag this circle to rotate the object. Hold Shift while rotating to limit the available angles. | Check your version number. Insert a text box. Move and resize the text box if necessary. Click inside the text box. Click on Format in the toolbar and select Text Direction from the drop-down menu. Insert WordArt instead. Rotate the WordArt object. |
Pick a ballpoint pen with an exterior the same diameter as or slightly smaller than the lock's opening. Remove the ink tube from inside the pen, as you will be using the ballpoint pen's exterior to jimmy open the lock. The notches should run up and along the sides of the pen. These will keep the pen flexible as they slide into the lock. Insert the pen as far as it will go into the lock, using pressure if needed. If the lock seems jammed and will not allow the pen to slide in, try either making the notches longer or cleaning any potential dirt or rust inside the lock. Hold the pen in one hand and the lock in the other and shake both from side to side until the pins loosen. If you hit all of the pins, the lock should open. Try shaking it several times—if it doesn't open after repeated attempts, you may need to use a lock pick. | Cut off the end of a ballpoint pen with scissors. Cut 4 vertical notches into the back of the pen. Slide the pen into the lock's opening. Shake the lock back and forth. |
Bend over slightly and hold frisbee in your hand, horizontal to the ground, at the height of the dog's mouth. Then let him grab it with his mouth while you are still holding on to it. Say "drop it" then take the frisbee from his mouth immediately. Now praise the dog graciously by saying "good boy (girl) and repeat the process again a few more times. Now do the exact same exercise, only move your body in a circle away from the dog, keeping it at the height of the dog's mouth. As the puppy grows, you will be able to stand up while doing this exercise. Now that you are standing up, hold the frisbee a little higher than the dog's mouth and horizontal to the ground, so he has to jump up to grab it. After a while, release the frisbee right before your dog jumps up to grab it. Try turning in a circle with this exercise as well. If you are training a young pup, you may need to repeat all the above many times before it is ready to chase the frisbee. | Teach grabbing. Teach running and grabbing. Teach jumping and grabbing. Advance to the steps above for older dogs. |
Keeping trash bags in your car will help you collect trash as necessary instead of just tossing it onto the floor. Among the most inexpensive options is to use an empty tissue box. Fill it with plastic bags saved from trips to the grocery or convenience store, and grab a bag whenever you need one. If you’re not a fan of using disposable plastic bags, you can use a plastic or glass sealable food storage container. Typically used for storing cereal, you can find a storage container at a grocery or home goods store. Try sticking velcro strips to the bottom so you can secure the storage container to the floor. You always can line it with a trash bag to easily dispose of the trash you’ve collected. To cut down on disposable plastic, just throw your trash in it, empty it out into your home trash receptacle, then wash it. Try using a container for recyclables and one for non-recyclable trash. Instead of using empty tissue boxes or cereal storage containers, you could always buy a trash can designed specifically for cars. Many models come with either strips that secure it to the car floor or straps that hang it from one of the front seats. You can buy one online or find one at an auto or home improvement store. Cup holders are notorious for collecting all sorts of grime and bits of garbage. After cleaning them out, place a cupcake holder inside each, then change them out periodically. You can also purchase store-bought car cup holder coasters. | Keep an empty tissue box filled with trash bags in your car. Use a cereal container to collect trash. Purchase a car trash receptacle. Place cupcake liners inside cup holders. |
It's generally easier to skimboard on sand than on the water, so you’ll probably want to do this first if you’re just starting out. Sand skimming only requires a board with a flat design, which most wooden boards have. Plus, wooden boards are usually cheaper than foam boards, making them ideal for those who are trying to save money while skimboarding. The typical price for a wooden skimboard is around $100. You can buy wooden skimboards at most sporting goods stores and many mass retailers. Once you’ve gotten the hang of skimming on sand and want to try skimming on water, you’ll want to get a skimboard that isn't as heavy as your sand skimming board. Foam boards are much lighter than wooden boards, making them ideal for skimming over water. They also typically are made with a curved design that makes it easier for the skimmer to ride along breaking waves. The typical price for a foam skimboard is around $200, though some may be as much as $600. The best terrain to go sand skimming on is any beach with smooth, flat sand. For skimming on water, the most important thing to look for is a shoreline with a very powerful shore break, meaning it produces sizable waves that you can ride all the way back to shore. If you want to focus mainly on wave skimming instead of sand skimming, then it might be better to go to a beach with a steep slope. Some of the more popular beaches to skim at are located in San Diego, England, and Florida. Skimboarding is a strenuous sport; if you’re not in shape, you may injure yourself doing it. Don't try skimboarding unless you’re sure you can run in short spurts, ride on a board, and take a few falls during the learning process. Keep your leg and back muscles stretched, warm, and strong while you’re learning to skimboard to avoid injury. | Buy a small, flat, wooden board if you’re mostly going to sand skim. Opt for a curved foam board to go skimming on water. Find a flat beach along the coast to skimboard on. Make sure you’re able to run and jump without any physical issues. |
Using too much setting powder can give you a cakey look that highlights pores, fine lines, and wrinkles. To set your foundation, only dust powder over the areas where you tend to get shiny or oily. For most people, that is the T-zone, or forehead, nose, and chin. You may also want to apply a light layer to your cheeks. If your skin is dry, you may want to skip powder completely. It can be very easy to apply too much pressed powder or powder foundation.To keep your powder from looking too heavy, opt for a loose, translucent formula that won't add any color or coverage. Bronzer and contour products can add warmth and definition to your face. If you use too much, though, you’ll wind up looking muddy. To keep it on natural, use a small amount on a small, fluffy brush and apply it softly along your forehead and temples, beneath your cheekbones, and along your jaw on each side of your face in a “3” or “E” shape for subtle definition. Blend your bronzer or contour product well so you don't wind up with stark stripes on your face. If you place your blush too low on your cheeks, you’ll wind up looking harsh and dragging your face down. Start at the apple of your cheek, and blend it back along your cheekbone toward your hairline. Start with a small amount of blush, and only add more if you need more color. Be sure to blend well too, so it melts into the skin for a natural look. An angled blush brush is helpful for getting the right placement of your blush. | Apply powder strategically. Use a light hand with bronzer or contour products. Sweep your blush higher up on your cheek. |
Before you start a big project like putting a music group together, you need a clear goal and vision. Determine what kind of group you want so that your vision for the group is clear from the start. You will need to choose the style of music for your group. How many people you have in the group, where you look for singers and instrumentalists, and how you get an agent or manager will all depend on the musical style. Most of the popular styles for singing groups are madrigal, a capella, pop, hip-hop, vocal jazz, rock etc. Where you look for your new group members will depend on what kind of group you want to make. For example, if you want a religious singing group, you should look for members at church, or maybe people who sing in a church choir. If you want people who can play instruments, you might want to ask people who are in band class at your school. This will depend on a number of factors. Some styles of music will feature only 2 or 3 singers, whereas others such as pop or a capella can feature 5 or more. You will need to decide on the gender of your members. Do you want an all girl or all guy group? Or a mixed group? If you decide on a mixed gender group, you will also need to decide how many male voices and how many female voices you will need for the right sound. If you are a rock or country group, you might only have one singer. Everyone else in the band will need a role other than back up singer. In groups like this, often there is a lead singer and a group of musicians that play guitar, bass, and drums. To find people to join your group, you could organize some kind of audition so that people will come to you. You'll need to advertise the event (make fliers, tell everyone you know, put an ad in your local newspaper, etc.). Post fliers around your school, at local businesses, at your church, and at local events. Take out an ad in the newspaper. That can help interested musicians and singers find you. Talk to people at your church or community center. They can help you spread the word about your group and the audition. Try announcing the event on social media like Facebook and Twitter. You can also post an ad on Craigslist and other websites. If you know people who are already in bands or singing groups, ask them if they know anyone who is currently looking to join a group. Post about it on social media. Ask your old band or music teacher if they know anyone interested. Do whatever you can to draw attention to your project so that you can find the talented people you'll need to be in your group. Even if all of the singing members have equal parts in the group, there still needs to be a designated leader. This will be the person who interacts with your manager, booking agents, members of the community and press. This person will have to make sure the vision of the group remains intact. Make sure its someone who can work with all the personalities in the group. Remember, you all have to be able to get along and collaborate effectively. A group will function better if everyone is clear on what roles they are supposed to play. Typically, parts are assigned based on people's skill level and talent in specific areas. If one group member has a beautiful tenor voice, it would be silly to assign them the alto singing parts. One group member who is good at choreograph can be in charge of putting together dance routines. Certain group members might be better at playing a certain instrument or singing a certain style better than others. Assign roles based on everyone's individual strengths and expertise. In a rock group, it's probably going to be more likely that each person plays a different instrument and there is one lead singer. Make sure everyone understands they can't always be in the spotlight. For example, not every rock song has a drum solo so your drummer can't always be featured. | Decide what kind of group you want. Decide what kind of voices you want for the singers in your group. Hold auditions. Ask around your community. Identify a leader. Determine what parts each person will play. |
When you go to an interview, be sure that you remember what you wrote in your application and the details of the job listing. It's also a good idea to do a bit of research on the company you are applying at. What is their basic business model and what makes the company unique? Are there any guiding missions of the company? These types of questions can usually be answered by some quick internet research, but this kind of information can really illustrate your interest and dedication if brought up during an interview. Brainstorm and write out any aspects of your personality or experiences in your life that may be pertinent to bring up during the job interview. These are things that you probably did not list in your resume but are important to get across to your possible employer. For example, this could include your personal qualities and work ethic. An interview usually has two types of questions, technical questions and HR questions. Technical questions gauge whether you know how to do the job you are applying for, and HR questions are designed to see if you are a team player. You will need to be able to answer both types of questions with confidence. Some examples of HR questions are: Where do you see yourself in 10 years? How do you handle criticism? How well do you work on a team? When asked, "How much money do you want to make?" you can provide your current salary. Or, you can say, "I am open" or ask, "What is the range of pay for this job?" When asked, "What don't you like about your current job?" if you answer anything negative, even though it might be true, it will make you look like a negative employee. When asked, "Where do you see yourself in 5 years?" if you don't answer with a position slightly above your job title, it will look like you don't really have interest in the job. You could even practice your interview skills by organizing a mock interview. If you're interviewing but not getting offers, then you have not yet warmed up to the interview process. It takes 3 to 5 interviews to get warmed up and get offers. While the appropriate attire will vary, depending on the job you are applying for and the company you are applying at, your appearance should always be neat and clean when interviewing for any job. Make sure that in addition to being dressed nicely, with professional clothes that are neat and clean, that you have also done some personal grooming before your interview. Small issues, such as body odor or messy hair, while not necessarily a deal breaker, can be a huge distraction for the people interviewing you. The goal is for your personality and experience to shine, so don't sidetrack those interviewing you with other things. | Review all your application materials and any job listing information. Practice possible interview questions. Have a professional appearance when going to your interview. |
Basic economy or subcompact cars are the perfect size for most travelers. They seat 4 people and have space for at least 2 bags. Most rental companies will try to upsell you to a bigger size, since that means more money for them. The upgrade comes with a nice, not-so-little fee tacked onto your bill. Economy-sized cars are popular rentals and sometimes companies run out of them. If you booked a rental, the company upgrades you to a bigger car for free. It pays to look for deals on the smallest car size you need! If you're sure you need something bigger than an economy-size, opt for a bigger car class when looking for deals. Browse all the available size options and even consider upgrading to a van if you're traveling in a group. Besides size, rental companies offer features like roadside assistance and a GPS system. While these sound nice in theory, they cost a lot. Get by without them when you're on your trip. Leave these options unselected when searching for deals and politely refuse them when you book the car. For example, navigate with your phone GPS or a road map. Stay away from premium roadside assistance upgrades, but check the rental policy to make sure basic assistance is included. Rental car insurance gets costly, so avoid it if you don't need it. Check your own policies, since many times your existing coverage handles rentals as well. Sometimes even credit cards include rental coverage. Most places have loyalty programs these days. If you're dedicated to one company, stick with them to earn free rentals. Companies sometimes give out preferred deals through these programs. Rewards programs are typically free to sign up for, so take advantage of them. However, you may end up missing competitive rates to build up points on your rewards card, so consider price comparison before committing to a company. Remember to read the fine print on how each program works. They usually reward points for each rental, but the points may expire after a certain period of time. These programs are more useful for people who rent often. | Choose a smaller car to reduce the price you pay for a rental. Refuse any unnecessary upgrades the rental company tries to offer you. Join rental car loyalty programs to save money if you travel often. |
The multivitamin itself will not likely contain glutathione, but many have several vitamins and minerals that improve glutathione production. It can be difficult to get enough of certain vitamins from your diet, so a multivitamin is a good complement to a healthy diet. Find a multivitamin that includes: Vitamin C Vitamin E Vitamin B1 Vitamin B2 Vitamin B6 Vitamin B12 Folate Selenium Magnesium Zinc ALA supplements are also available, but check with your doctor to determine the appropriate dosage for you. MSM or (Methylsulfonylmethane) is a mineral compound that provides a source of sulfur, which is necessary for producing both ALA and Vitamin B1, which in turn increase glutathione levels. If you are not getting enough sulfur in your diet, ask your doctor about supplementing with MSM. Sulfur is what gives glutathione its antioxidant abilities, so any other method you use to boost glutathione will be useless if your sulfur levels are too low. MSM is just one way to obtain sulfur; it can also be acquired from eating several types of raw fruits and vegetables. MSM is also believed by some people to provide relief from pain and some other symptoms of arthritis and various other joint conditions; however, there is not much scientific research to support this. Your doctor may recommend a nebulizer inhaler to deliver this form of glutathione supplement; however, it is usually only recommended for people with genetic conditions that cause glutathione deficiency. Some lung conditions, such as cystic fibrosis, are believed by some to be helped by glutathione inhalants, but evidence to support this is sparse. You should not use glutathione inhalants without a doctor's prescription or recommendation. Do not use this form of glutathione supplement as an alternative to dietary or oral supplementary glutathione or its precursors. There are better ways to boost your glutathione levels if you are not severely deficient! This type of glutathione supplementation is only recommended for individuals with medically diagnosed illnesses known to be helped by glutathione. Injections are done intravenously and should not be attempted by anyone but a licensed medical professional. The most well-supported use of glutathione injections is relief from the side effects of chemotherapy in cancer patients. This is something that an oncologist (cancer doctor) must prescribe. No other purpose for glutathione injection is broadly accepted by the medical community as effective; however, some people believe it to be useful for lots of other illnesses, including Parkinson's disease, diabetes, some forms of anemia, atherosclerosis (hardening of the arteries), and male infertility. Transdermal glutathione is applied to the skin and absorbed over a short period of time. There is some evidence that glutathione creams improve certain skin conditions and generally make the skin look more youthful. This type of glutathione supplementation usually comes in the form of a cream or patch and is available through online pharmacies without a prescription. There is no medical or scientific evidence to suggest glutathione levels in the body can be significantly improved by transdermal creams or patches. Although no prescription is required for transdermal glutathione, it is best to talk to your doctor before using glutathione creams. There is a chance you could experience a rash or skin irritation when taking glutathione this way. | Take a multivitamin that promotes glutathione. Take MSM supplements. Consider glutathione inhalants. Get glutathione injections. Use transdermal glutathione products. |
It can be hard to fall asleep at night or to sleep late in the morning if you are not getting adequate physical exercise every day, which exhausts the body and helps you rest more thoroughly at night. If you do not regularly exercise, ease into a regular routine of about 30 minutes of moderate activity a day. This can be as simple as a walk around your neighborhood. In addition to sleeping better, there are so many benefits to regular exercise, including better immunity, emotional health, and self-confidence. Going to bed and rising at the same time every night is actually the best way to feel rested, instead of relying on sleeping in to "catch up" on lost sleep throughout the week. Instead of sleeping in on weekends, try going to bed thirty minutes to an hour earlier than your typical bedtime during the week. Then, on weekends, go to bed and rise at the same time as you do during the week. This will add in the needed extra sleep without compromising your sleep schedule. Most adults need between 7 and 9 hours of sleep a night to feel rested and productive; children and teenagers need significantly more (anywhere from 9 to 11 hours). The exact amount varies depending on your body's needs and how active you are throughout the day. Your body's natural circadian rhythm is strongly linked to light: you are naturally wired to be alert in the daytime and to sleep at night, so light contributes to wakefulness and dark contributes to sleepiness. You need to ensure that your daytime environment, whether it's an office or your home, is full of lots of natural light to keep your circadian rhythms in balance. Open up the blinds, take heavy draperies off the windows, and turn on your lamps or other lights in your home during the day. If you can't get a lot of lights in your indoor environment, be sure to spend a lot of time outdoors in natural light. One of the biggest contributing factors to poor sleep quality is high stress levels. Learning coping techniques to lower your stress level can help you sleep better at night, so that you'll feel more rested and won't need to sleep in. Practice positive self-talk. Research has shown that having a good attitude can actually reduce stress levels. You can begin changing your attitude by saying positive things to yourself instead of negative things throughout the day. Instead of thinking about your faults and failings, think about your strong points. Instead of saying to yourself, "I'm bound to fail" or "I always mess up," tell yourself "I can do this," and "I can handle this." Find a creative outlet like painting, sports, music, or cooking. Expressing yourself creatively can reduce your stress and help you find pleasure in life. Learn to relax. There are many ways to relax throughout the day and before bed; try meditation, yoga, or tai chi to see what works for you. | Exercise for better sleep. Try to maintain a regular schedule. Turn on the lights. Deal with stress. |
For more sensitive fish, such as shrimp and sea stars, you may have to use the drip method. With the drip method, you set up a series of tubes running from the main tank to a bucket of water. You will need the following to use the drip method: You will need 3 or 5 gallon buckets, designed for aquarium use. You will also need airline tubing. Fill the buckets a little under halfway full with clean aquarium water. You will need to start off by floating the fish to acclimate it to the water in the buckets. Let the sealed bag float for 15 minutes. Then, open the bag and roll the sides down to create an air tube that will keep the bag floating. Add half a cup of the water from the bucket to the bag. Wait 15 minutes. Add another half cup. Keep going until the bucket is full. Gently lift up the bag. Pour the contents of the bag, including your fish, into the water. You may have to tilt the bag at a 45 degree angle when pouring. This will keep your fish fully submerged in water as you transfer it to the bucket. Place one end of the airline tube in the aquarium. You should also tie several very loose knots in the tubing. This will help regulate the flow of water and air. You want to get a rate of 2 or 4 drips per second. You can get water to start flowing by sucking gently on the other end of the tube. Once water begins dripping, place the other end of the tube on the edge of the bucket. It may take awhile for the water in the bucket to double, so be patient. In general, it takes about an hour. As soon as the water doubles, carefully discard half the water. You may have to scoop out the water using a cup or smaller bucket to avoid dumping your fish. When you're done discarding the water, put your tubing back in place. Once again, suck on the end of the tube you're placing in the bucket to get a drip going. Wait for the water in the bucket to double again. Use a bag to gently scoop out your fish. Gently pour the contents of the bag into the main aquarium. Some species of fish should never be exposed to air. Sponges, clams, and gorgonias cannot handle air. Be extra careful when transferring these types of fish. | Gather your supplies. Float the fish initially. Transfer water to the bucket. Set up a siphon drip. Discard half the water once the water doubles. Transfer your fish to the main tank. |
Go over your regular meal routine. Be on the lookout for sweet foods you tend to consume. If you regularly have meals based around sweet goods, look at ways you can avoid those meals. Think about what you eat on a regular basis. Maybe a lot of your dishes and side dishes tend to be sweet in nature. Do you, say, eat pancakes or a muffin for breakfast a lot? Do you tend to eat things like candied sweet potatoes or sweetened baked beans during dinner? It can be hard to quit cold turkey. You can start by cutting out one sweet meal a week. For example, on Monday mornings, have unsweetened yogurt and fruit for breakfast instead of a muffin. As the weeks go on, you can increase the number of meals you cut. In addition to sweetened meals, you may consume small amounts of sweets throughout the day. Work on being conscious of the sweets you're consuming, and try to find ways to alter or avoid tiny sources of sweet food. Think about tiny sources of sugar you consume. Do you put sugar in your morning coffee? Do you reward yourself with a cookie after a long day at work? Do you tend to mindlessly snack on sugary cereals when bored? Look for healthier alternatives. Try drinking coffee black, or adding low sugar sweeteners. Reward yourself with something that's not related to food, like watching an episode of a TV show you like. Replace sugary snacks with healthy snacks, like nuts and dried fruit. If you keep a lot of sweet food on hand, you're more likely to consume sweets throughout the day. Avoid purchasing food you know you'll snack on excessively. Don't bring sugary snacks into your home. If you do have a few sugary snacks on hand, try to go for something like a 100-calorie pack of cookies instead of a whole box. Keep sugary foods out of reach. If you have to get on a stepping stool to access a box of cookies, you may be less likely to snack on them. Social gatherings may be a major source of unhealthy eating. Work on ways to avoid overdoing it when attending parties or going out with friends. You'll be less likely to overeat if you feel full before going out. Eat a healthy meal to fill up prior to a social engagement. Bring something healthy to snack on at the party. You could, for example, show up with a fruit or veggie platter. If you're really craving sugar, have a small piece of something. You could take a single cookie or piece of candy. You could have half a slice of cake instead of a whole slice. | Cut sweet meals from your regular routine. Alter small sources of sweets in your diet. Limit sweets in your home. Manage your eating at celebrations and parties. |
When you discover a weevil infestation, the first thing you have to do is get all the food off the shelves in your pantry or cupboard. That way, you can clean all the shelves and inspect the food for contamination. Set up all the food in one location, such as in your kitchen. Go through all the food that was in your pantry or cupboards and inspect for weevils or signs of infestation. If you find weevils in whole grains that can be rinsed, you can clean the grains and salvage them. Ideal candidates for rinsing include whole-grain rice, barley, and buckwheat. Place the grains into a strainer and hold it under running water. Use your hand or a spoon to comb through the grains, making sure the water rinses them all. When the weevils have been rinsed away, place the grains on a baking sheet and into a 140 F (60 C) oven for 15 minutes to kill any eggs and dry the grains. Many infested foods, such as flours and cereals, cannot be rinsed without being damaged. Throw these foods out. Place them in a large garbage bag and tie the bag tightly. Remove the bag with the contaminated foods from your house immediately so the weevils don't eat their way out and infest again. If you don't feel comfortable salvaging infested foods like rice, simply discard them as well. Once you’ve gone through and thrown out all your infested foods, wash the containers with hot, soapy water to remove any eggs or larvae that might still be present. For dishwasher-safe containers, run the dirty containers through the dishwasher instead. This will serve the dual purpose of sucking up weevils and removing their food source. Make sure you get into all the nooks, crannies, corners, and cracks. Vacuum the floor in your pantry as well, or the counter under the cupboards. Once weevils infest your pantry, they may travel out to explore new areas of your kitchen if they're attracted to any other food sources. Crumbs and forgotten bits of food can often be found under appliances, so it's important to clean under these as well. Pull out your stove and fridge and vacuum thoroughly underneath before replacing them. You should also move and vacuum under your microwave, toaster, toaster oven, and any other countertop appliances you have. Weevils can hide in places you'd never think, including underneath old shelf paper on the shelves in your pantry or cupboard. To ensure that you don't have any stowaways, and to remove any eggs and larvae, remove the shelf paper that's lining your shelves. Discard the old shelf paper immediately. Vacuum and clean the bare shelves before installing new paper. Once everything has been cleaned thoroughly and the new paper installed, you can start returning non-contaminated food to your pantry or cupboard. | Remove all the food from your cupboards. Rinse infested grains. Discard infested food that can't be rinsed. Wash contaminated storage containers. Vacuum all the shelving. Clean under all your appliances. Replace old shelf paper before returning food to the pantry. |
The type of event will likely determine how to dress, such as weddings, parties, school dances, and the like. Oftentimes different events will call for “semi-formal dress” but the actual expectations may differ depending on the type of event, time of day, and so on. If the event is in the daytime, you should expect to dress slightly less formally and in lighter colors than for evening events. Girls can wear skirts and a dress shirt for day events while guys can wear a light suit jacket paired with suit pants, khakis, or cotton twill pants. If the event takes place in the evening, “semi-formal” generally means more formal. One helpful rule to stick by is “the later the event, the darker and dressier.” Therefore, guys should wear darker colors, such as a dark suit and tie. Girls should wear a cocktail dress, slacks and a dressy blouse, or a little black dress. If in doubt, ask the organizers of the event. The location of an event can help you dress appropriately since, again, the definition of “semi-formal” actually changes quite a bit depending on these variables. If you’ve been invited to a garden party in the middle of the afternoon, you don't want to sweat through your clothes, so you can likely wear lighter fabrics and slightly more revealing clothing (such as knee high skirts or dresses for girls). However, if you’ll be indoors for a more conservative event, such as a bar mitzvah in a synagogue, you’ll want to cover up more and also perhaps have a couple layers to adjust to the temperature as needed. Another possible consideration is where the event will be held in terms of region or even country. The concept of semi-formal is different not only for each event but also for different groups of people. For example, a semi-formal event at a beach in Southern California will likely include sundresses and flipflops while expectations may be different at an event on the East Coast. If you are going to an event in a different country or a foreign cultural event, be sure to ask ahead of time for more guidance on what to wear. There are some key ways to avoid the mistake of drastically under- or overdressing. Knowing some of the basic ways in which these three categories differ from each other will help you dress appropriately for every occasion. Semi-formal dress tends to be more comfortable and flexible than formal dress. However, many people (girls and guys alike!) think that means anything goes when there are some key rules. For example, for girls, a golden rule of wearing a semi-formal dress is that it can go to the knee or lower but it should not touch the ground. A floor length dress would be considered formal and you would probably be considered overdressed for the occasion. Of course, you don't want to wear simply any dress based on length so go for dresses that are made of fancier fabrics, such as silk, satin, or velvet. For guys the expectation of semi-formal dress is a bit more straightforward: wear clothes that are just slightly less formal than a tuxedo. Dress slacks, jackets, blazers, and suits are all good starting points. The colors, thickness of fabric, and level of accessorizing is up to individual taste as well as the event details (location, time, etc). | Consider what kind of event you’re going to. Consider where the event will be held. Understand what separates semi-formal from casual and formal dress. |
Use whichever brand of vanilla ice cream you prefer the most. Pour the milk into a measuring cup so that you use the correct amount. Then, pour the milk over the ice cream. If you don't have a scooper, use a large spoon instead. Measure the Amarula with a jigger or shot glass. Then, pour each shot into the blender and turn the blender on high. Keep blending the drink until the ice cream is fully incorporated with the ice and the drink is smooth. If you want to add even more sweetness to the shake, spray some whipped cream or squeeze some chocolate syrup on top of the drink. Keep in mind that the ice cream and Amarula are already sweet, so adding more sugar will cause it to become even sweeter. Enjoy the drink while it's still cold. | Add 3-4 scoops of vanilla ice cream and 1 c (240 ml) of milk to a blender. Pour 1-2 shots of Amarula into the drink and blend it together. Pour the drink into a glass and garnish it. |
Go to https://www.youtube.com/ in your browser. This will open your YouTube home page if you're logged into your YouTube account. If you aren't logged into your YouTube account, click SIGN IN in the top-right corner of the page, then enter your email address and password. It's in the top-right corner of the YouTube page. Clicking it prompts a drop-down menu. You'll find this option in the drop-down menu. Doing so opens the Settings page. If you use the old version of YouTube, you'll instead click the gear-shaped icon in the drop-down menu. It's at the bottom of the page. This will open an additional section of options below the bottom of your browser window. This is at the bottom of the page. It's at the very bottom of the page, below the "Restricted Mode" section. Doing so will save your changes and disable Restricted Mode for your account. Close the YouTube tab, then open a new tab and go back to YouTube. This will reset YouTube's cache, allowing previously restricted videos to show up in your subsequent searches. | Open YouTube. Click your profile icon. Click Settings. Click the "Restricted Mode" drop-down box. Scroll down and check the "Off" box. Click Save. Close and re-open YouTube. |
State-of-the-art deep neural networks typically have tens of millions of parameters, which might not fit into the upper levels of the memory hierarchy, thus increasing the inference time and energy consumption significantly, and prohibiting their use on edge devices such as mobile phones.The compression of DNN models has therefore become an active area of research recently, with emerging as one of the most successful strategies.A very natural approach is to prune connections of DNNs via regularization, but recent empirical investigations have suggested that this does not work as well in the context of DNN compression.In this work, we revisit this simple strategy and analyze it rigorously, to show that: any of an-regularized layerwise-pruning objective has its number of non-zero elements bounded by the number of penalized prediction logits, regardless of the strength of the regularization; successful pruning highly relies on an accurate optimization solver, and there is a trade-off between compression speed and distortion of prediction accuracy, controlled by the strength of regularization.Our theoretical results thus suggest that pruning could be successful provided we use an accurate optimization solver.We corroborate this in our experiments, where we show that simple regularization with an Adamax-L1 solver gives pruning ratio competitive to the state-of-the-art. | We revisit the simple idea of pruning connections of DNNs through regularization achieving state-of-the-art results on multiple datasets with theoretic guarantees. |
Do you want to use a computer for your automatic writing session or do you want to use pen/pencil and paper? This is completely based on your personal preference. Some would argue that pen and paper is the only good way to use automatic writing, but if you can type faster than you can write (and you're more comfortable with it), it may be more helpful to use a computer. You can also try out each medium to see which one you prefer, or you can change between the two if you like. If you are practicing automatic writing to improve your creativity, or to help yourself get started on a writing assignment, then it will be helpful to have a prompt of some sort. You could, for example, write about something that has been on your mind a lot lately, or about a dream you had recently that stands out in your mind. Perhaps a problem you have, or something you are excited about. Maybe you have an idea for a story in mind, in which case you can use that as your topic. If you don't quite have all the details of story you'd like to write clear, you can simply write about all the different ideas and pieces of the story that you do have. You could, for example, answer the “5 W's” about your topic. That is, Who? What? When? Why? How? Or you could just have the topic you want to write about in mind. 10 minutes should be a good starting point. Setting a timer will help you avoid wondering if you've been writing for long enough. Remember that 10 minutes is merely a suggested starting point. If you want to write for longer, then do so. If you set your timer for 10 minutes, but you feel like you have more to write, you should keep going until you feel that you've gotten it all out. On the other hand, you should not stop writing until the 10 minutes are up. Even if you feel that you have run out of things to write. Keep trying, and eventually your hand will write something. Remember, you can write anything, even if it's a wild tangent from your topic or only loosely related. You can listen to instrumental music, meditate, or listen to a guided meditation before and/or during your automatic writing session. This will relax you and make it easier for the words to flow. You might meditate before your writing session, then listen to instrumental music while you write. Write whatever comes in to your mind as it comes into your mind. Ideally, it will be related to your topic, but if it is unrelated, you should still write it. Pay absolutely no attention to grammar, spelling, sentence structure, style, or anything that you would normally be worried about when writing. These things are of absolutely no importance in automatic writing. After you have completed a round of writing, stop your writing, and give yourself a break for a few minutes. Now you should go back to what you have written and read through it. Don't judge yourself harshly. What you have written may not make any sense at all, and it definitely won't be pretty. As you are reading, you may find things that you find particularly interesting. You should make note of these by highlighting them or circling them to come back to. Using these ideas, you can complete another round of automatic writing, if you feel that you want to continue the exercise. If, after using automatic writing you feel that you are ready to move on to the next step in your writing process, then do so. On the other hand, if you feel that you have moved forward, but still haven't gotten what you wanted out of the exercise, feel free to repeat as often as necessary. | Decide on a medium. Give yourself a question or topic that you want to write about. Set a timer. Do a calming activity if you don't like closing your eyes. Start writing. Relax. Read what you have written. Highlight or circle anything that is interesting to you. Continue with your writing. |
You'll need two golden apples—one for each horse—which means you need the following resources: 2 apples — Used as the base for the golden apples. 16 gold bars — You can create gold bars by smelting gold ore in a furnace. 1 Crafting Table — Used to make the golden apples. If you don't yet have a Crafting Table, make one before proceeding. This process will vary slightly depending on your platform: PC — Open your Crafting Table, click the stack of gold bars, right-click twice each box in the Crafting Table except for the center one, place both apples in the center box, and move the two gold apples into your inventory. Mobile — Open your Crafting Table, tap the magnifying glass icon on the left side of the screen, and tap twice the gold apple icon. Consoles — Open your Crafting Table, select the magnifying glass tab, and select twice the gold apple icon. You'll want to make sure that neither of the horses escape when entering the enclosure. Feeding a golden apple to a horse that you've accidentally attacked will result in the horse being fed rather than being primed for mating. If your horses aren't both at full health, feed each of them red apples until they stop eating. In your equip bar at the bottom of the screen, make sure you have the golden apples selected. Right-click or left-trigger each of the horses with the golden apples equipped. Doing so will prompt red hearts to appear over each horse's head, signifying that they're ready to breed. On Minecraft PE, you'll face each horse and tap Feed at the bottom of the screen. After a few seconds, you should see a small horse appear in the enclosure. This is the foal that the two tamed horses created. | Gather the resources for golden apples. Craft two golden apples. Enter your horses' enclosure. Make sure that both horses are at full health. Equip the golden apples. Select each horse. Wait for a foal to appear. |
You can find the information you'll need to make this calculation on the company's balance sheet. You will have to make some decisions about which of the balance sheet accounts to include in your calculation of debt. Equity refers to the funds contributed by the stockholders, plus the company's earnings. The balance sheet should include a figure labeled as total equity. When determining debt, include interest-bearing, long term debt such as notes payable and bonds. Be sure to include the current amount of long-term debt. You'll find this in the current liabilities section of the balance sheet. Analysts often leave out current liabilities, such as accounts payable and accrued liabilities. These items provide little information about how a company is leveraged. This is because they do not reflect long-term commitments, but only the day-to-day operations of the business. Companies will sometimes keep certain expenditures off their balance sheets. This is to make their debt equity ratios look better. You should include certain off-balance sheet liabilities when calculating debt. Operating leases and unfunded pensions are two common off-balance sheet liabilities. These expenditures are often large enough to include in the debt to equity ratio. Other debt to look out for may come from joint ventures or research and development partnerships. Scan through the notes to the financial statements and look for off-balance sheet liabilities. Include those greater than 10% of the total of interest bearing debt. Find this ratio by dividing total debt by total equity. Start with the parts that you identified in Step 1 and plug them into this formula: Debt to Equity Ratio = Total Debt ÷ Total Equity. The result is the debt-to-equity ratio. For example, suppose a company has $300,000 of long-term interest bearing debt. The company also has $1,000,000 of total equity. This company would have a debt to equity ratio of 0.3 (300,000 / 1,000,000), meaning that total debt is 30% of total equity. Once you have calculated a company's debt to equity ratio, you can begin to develop an idea of its capital structure. Here are some things to keep in mind: A ratio of 0.3 or lower is considered healthy by many analysts. In recent years though, others have concluded that too little leverage is just as bad as too much leverage. Too little leverage can suggest a conservative management unwilling to take risk. A ratio of 1.0 means that the company funds its projects with an even mix of debt and equity. A ratio greater than 2.0 means that the company borrows a lot to finance operations. It means that creditors have twice as much money in the company as equity holders. Lower ratios mean that the company has less debt, and this reduces risk. A company with less debt will also have less exposure to interest rate increases and changes in credit conditions. Some companies will choose debt financing despite the increased risk. Debt financing allows a company to gain access to capital without diluting ownership. It may sometimes also result in higher earnings. If a company with lots of debt becomes profitable, a small number of owners may make a lot of money. | Determine the company's debt and equity. Watch out for expenditures that aren't listed on the balance sheet. Calculate the debt-to-equity ratio. Do a basic assessment of the firm's capital structure. |
Start by trimming the meat of visible fat and place it in a roasting dish with vegetables. If you're making a large piece of meat, cook it at low heat for a long time so the meat tenderizes. To cook thinner cuts of meat or vegetables, place them on a sheet about 3 inches (7.6 cm) below a broiler and broil them until they're as cooked as you like. Keep in mind that thin cuts of lean meat should usually be cooked quickly so they don't become tough. lean meats and vegetables to add a smoky flavor. Grilling is a great low-fat technique since any fat from the food will drip through the grates instead of being reabsorbed by the food. You can also add a handful of woodchips to the grill to enhance the flavor of the smoke. To make it easier to grill vegetables, place them in a grill basket which you can set directly on the grates. to quickly make a low-fat meal. Skip the batter and slice lean meat or vegetables into thin strips while you heat a skillet or wok over medium-high heat. Spritz a little cooking spray into the pan and add the prepped food. Keep stirring as the food cooks so it heats evenly and doesn't stick. This is a great way to get caramelized flavor without adding a lot of fat. If the food starts to stick to the pan, add a few spoonfuls of water or vegetable stock. meat and veggies to create tenderness without the fat. Instead of cooking meat and vegetables in fat, such as butter or oil, cook it in water! Heat about 1 inch (2.5 cm) of water in a pot until it starts simmering and producing steam. Then, put your food into a steamer basket and set it into the pot. Put the lid on and steam the food until it's tender and cooked throughout. The bottom of the steamer basket shouldn't be touching the water or the food will boil instead of steam. Foods that are battered or fried in oil and grease are high in saturated fat. This is because the food absorbs some of the fat as it fries. Instead of using these methods to get crispy foods, try coating foods, such as chicken pieces or fish, in panko breadcrumbs or crushed cornflakes before baking them. If you choose to stir-fry foods instead of deep-frying them, you can add extra crunch by sprinkling some toasted nuts over the food just before serving. | Roast or broil meat and vegetables to get rich flavor that's low in fat. Grill Stir-fry Steam Avoid deep-frying or pan-frying foods. |
If you live in a place with mild winters - growing zone 10-12 or higher - you should be able to plant the poinsettia directly in the ground, where it will grow as a perennial and get larger with each passing year. If you're in a place where the temperature dips to freezing temperatures during the winter, you're better off keeping it in the pot as a houseplant. Poinsettia are native to Mexico, and they need a warm climate to thrive. If you bought the poinsettia during the winter as a decoration, keep the plant in the pot until spring, even if you live in a place with mild winters. If it came in foil remove the wrapper so water can drain from the pot. It needs to stay potted until the weather gets warm enough to transplant it. Water it whenever the soil starts to dry out. At the beginning of spring, in March or April, cut the poinsettia back to about 8 inches. This will encourage it to begin a new growing cycle and get it ready for transplanting. Keep it watered and fertilize it once a month or so until early summer, when it's time for transplanting. Look for a place where the poinsettia will get morning sun as well as light or partial shade during the heat of the afternoon. Till the soil and loosen it to a depth of 12 to 16 inches (30 to 40 cm). Enrich the soil by adding organic compost if necessary. Poinsettias prefer rich, well-drained soil. Dig a hole as wide as the poinsettia's root ball and plant the poinsettia. Pat soil gently around the base of the stem. Mulch the area around the base of the plant with 2 to 3 inches (5 to 7 cm) of organic mulch. This keeps the soil cool and helps it retain moisture. You can apply a 12-12-12 or 20-20-20 compound at the start of the growing season or fertilize the plant with compost. If your soil is not very rich, you may need to fertilize the plants once a month. Water the plant at the base whenever the soil around the plant feels dry to the touch. Avoid overhead watering, which could cause fungal disease to form on the leaves of the plant. Pinch small growing shoots from poinsettias occasionally throughout the growing season to encourage the plants to flower. You can discard the shoots or use them to propagate new plants. Cut back old growth in late fall or early winter to encourage strong new growth the following spring. You can take 8 inch (20 cm) cuttings from the soft growing tips of poinsettia stems or 18 inch (45 cm) cuttings from the woody stems of the plant to create new poinsettia. Dip the ends of each cutting into a rooting hormone, then insert it into a pot filled with potting soil or a vermiculite mix. Keep the soil in the pot moist, but not wet, for several weeks while the cuttings make roots. Add fresh mulch around the base of the plant to keep the soil warm for the winter months. Poinsettia can winter over in areas where soil temperatures do not fall below 45 degrees Fahrenheit (7 Celsius). Dig the plants up and bring them indoors if you live in a climate where winters are cold and soil temperatures fall below 45 degrees Fahrenheit (7 Celsius). | Decide whether the climate is right. Care for the poinsettia until spring. Prepare a planting spot. Plant the poinsettia. Fertilize the poinsettia. Water the poinsettia throughout the growing season. Prune the poinsettia. Propagate poinsettia cuttings. Overwinter the poinsettia. |
Place the container on the top rack, leaving it open. Close the dishwasher and start a hot-water cycle. The vinegar will work to remove grime and mold that may have accumulated around the dishwasher. Make sure the dishwasher is empty save for your vinegar filled container. Make sure the dishwasher is empty. Sprinkle it over the bottom. Let the baking soda sit in your dishwasher overnight. After doing so, turn the dishwasher on for a short hot water cycle. The baking soda will remove any remaining odors from the mold. While the vinegar and baking soda will remove any mold on the walls, some of the dishwasher's nooks and crannies (such as the door seal and the folding arms) might need a bit more attention. Dip the toothbrush in soapy water and scrub at any mold you find. Pay close attention to the drain and spray arm at the bottom of the dishwasher. Humidity and food can collect there, making them a prime spot for mold. Scrub each thoroughly. | Fill a dishwasher safe container with a cup (237ml) of vinegar. Sprinkle a cup (237ml) of baking soda in the dishwasher. Use a toothbrush to scrub any remaining mold. |
Take care not to dig a snow cave under the path of a potential avalanche or rockfall. Slopes with the wind blowing against them could be dangerous if you are staying overnight, as blowing snow could clog the entrance tunnel and block access to the outside air. If you can find a snowdrift at least five feet (1.5m) deep, a lot of your work will be done for you. Look for areas where the wind has blown the snow against a slope. Keep in mind you'll also need an area large enough to house however many people you have. A ten foot (3 m) diameter cave is comfortable for two or three people. Light, powdery snow may be difficult to work with, and is more likely to collapse. Fortunately, snow tends to harden once disturbed, so if you have the time to pile it up and wait for it to harden, you will likely still be able to form it into a snow cave. If you are in an emergency situation, one alternative is to dig a trench in the snow and use a tarp to cover it. Prop the tarp up with ski poles or branches stuck in the snow. This is easier and faster to dig, but will not provide the same warmth as a snow cave, and could become buried in a snowstorm. Warm, waterproof clothing is essential if you are out in the wilderness. Consider removing one or two dry under-layers of clothing before you begin working so you have something to change into if your clothing gets wet while digging. As for equipment, a compact snow shovel or two will make the snow cave's construction much easier. A non-smoke-producing light source is useful for overnight stays, but a candle or other small flame source can be used if you remember to create a ventilation hole. Ventilation holes are described further on in this article. Having at least two people build a cave together is highly recommended. Keep one person outside of the cave with a spare shovel at all times. This way, if the cave collapses during the digging, the person on the outside can shovel away the snow to rescue the person trapped inside. | Avoid areas of rockfall or windy slopes. Find an area with deep snow. Test the consistency of the snow. If conditions aren't right, consider a trench instead. Check that you have the clothing and equipment you need. Find a friend to help. |
In a small bowl, combine two cups (480 ml) of cool water with one tablespoon (14.79 ml) of dishwashing liquid. Stir to integrate the dishwashing liquid with the water. Wet a clean white cloth with the dishwashing liquid solution, then dab at the stain with the cloth. You should notice that the stain starts to lift from the upholstery. Once the stain is completely wetted by the solution and you aren't lifting any more stain from the fabric, let the solution soak into the stain for about 30 minutes. Check from time to time to make sure that the solution hasn't dried out. If it is getting dry, dab on a little more dishwashing solution. If the stain has not been completely removed, repeat steps 2 and 3, blotting the stain with solution, then letting it set for a half hour. After a couple repetitions, the stain should be gone. If it has been removed, wet a clean cloth with water, then blot at the place where the stain was to remove the soap solution. If the stain is still present, you will need to try a more potent cleaning solution. For particularly stubborn stains, blotting with dishwashing solution may not be enough. Create a more powerful cleaning solution by combining one cup (240 ml) of cool water with a tablespoon (14.79 ml) of sodium thiosulfate. Because sodium thiosulfate solution is very powerful, you need to apply it sparingly and only on the stained portion of the upholstery. Use an eyedropper to drop several drops of the solution onto the stain. After you apply the drops of sodium thiosulfate solution, use the eyedropper to apply a couple drops of ammonia onto the stain as well. Ammonia is another powerful cleaning ingredients that will help separate the stain from the fabric. Use a dry cloth to blot at the area of the stain. The cloth will absorb the liquid and lift the stain that the ammonia and sodium thiosulfate help to dislodge from the fabric. Blotting with the dry cloth should have worked to completely remove the stain. After you lift the stain, wet a clean cloth with cool water, then dab at the area of upholstery you were working on. This will remove any traces of cleaning solution. Then use another clean cloth to blot the area dry. | Make a solution of water and dishwashing liquid. Blot the stain with the solution. Let the solution set for about 30 minutes. Repeat the process of blotting and setting. Make a solution of water and sodium thiosulfate. Apply the sodium thiosulfate solution with an eyedropper. Add a few drops of ammonia to the stain. Blot using a clean, dry cloth. Blot with a wet cloth, then dry. |
You can help make your attic less inviting by removing easily accessible food sources from the exterior of your home and your yard. Keep your trash cans secured, avoid keeping any pet food accessible outside, and pick up any fruit or nuts that have fallen from trees in your yard. Contrary to what many think, these methods won't get rid of animals living in your attic or keep them away, especially raccoons and mice. Additionally, mothballs are carcinogens that can cause a potentially harmful environment for humans when not handled properly. It may be impossible to eliminate squirrels from your property, especially if you live in a wooded area or value your trees, but you can provide a comfy alternative to your attic in hopes that they choose the nest that's easier to reach. | Remove food sources. Skip the mothballs, ammonia, and noise machines. Put up a squirrel nesting box on your property. |
Switch the hammer of the revolver into its half cocked position again. Note that the cylinder should be able to rotate freely at this point. Point the barrel of the gun toward the sky, keeping the entire gun in an upright position. Keep the right side of the gun facing toward you. Do not position any part of your body over the revolver. Carefully pour a properly measured charge of black powder into the chamber closest to the loading cutout. Repeat for each chamber. Use an individual powder measure. Do not pour powder from a large powder flask or can. The exact amount of powder will vary depending on the type of gun. For a .36, use 12 grains of powder. Never exceed 20 grains. For a .44, use 20 to 28 grains of powder. Never exceed 35 to 40 grains. Set a proper size ball or bullet over the opening of the chamber nearest the loading cutout. The ball should be oversized so that it only rests on top and does not enter. Make sure that the ball or bullet has been lightly greased before you load it. Rotate the cylinder of the revolver until the ball sits under the plunger of the loading lever. Unlatch the loading lever and use it to firmly press the ball down until it sits securely and firmly on the powder. Apply smooth, even pressure as you do this. There should be no air in between the powder and ball, but you should not crush the powder as you seat the ball. Also note that a thin outline of lead will be shaved off the ball as you do this. It should be visible at the opening of the chamber. This is a good sign and and indication that the ball is properly fitted. Follow the same steps to load the remaining chambers with a ball or bullet. It is recommended that you only load five chambers of a six-chamber revolver. Keep the hammer rested on the nipple of the unloaded chamber to reduce the risk of an accidental firing. Fill the space above the ball in each cylinder with vegetable grease or bullet lubricant. The use of grease can prevent "chain firing," or accidental secondary discharges. Point the gun down range and place a percussion cap on each loaded chamber. With the completion of this step, the revolver is fully loaded. Make sure that the hammer is still in a half cocked position before doing this. | Half cock the hammer. Hold the muzzle up. Pour a measured charge into the chamber. Place the ball over a chamber opening. Rotate the cylinder. Seat the bowl using the loading lever. Repeat with the remaining chambers. Apply additional grease. Place a percussion cap on each loaded chamber. |
Gargling with salt water can help to reduce some of the swelling in your throat and this can help to reduce coughing. You can gargle with salt water every couple hours throughout the day to help with your wheezing cough. To gargle with salt water, take about ¼ to ½ teaspoon of sea salt and dissolve it in one cup of warm water. Then gargle with the saltwater solution for about 30 to 60 seconds. Spit out the salt water after you are done. Cough drops can help to silence a wheezing cough, but keep in mind that cough drops will not cure a wheezing cough. Look for cough drops that contain menthol, which has a cooling effect on your throat and breathing passages. You can suck one lozenge every couple of hours to help silence your wheezing cough temporarily. Keeping the air moist in your home can also be helpful for a wheezing cough. Humid air helps to loosen up mucus and reduce coughing. You can run a humidifier when you are home to prevent the air from becoming too dry. You can also try adding a few drops of essential oil to the humidifier to increase the benefits of the steam. Some good essential oils to add to a humidifier include eucalyptus, peppermint, ginger, and camphor. If you do not have a humidifier, then taking a warm shower will help to moisten your nasal passages and calm down your wheezing cough as well. Try taking a warm shower before bed to help you relax and reduce coughing while you sleep. Rest is essential for recovery from any type of illness, so plan to get lots of rest. You may need to take a day or two off of work to allow yourself enough time to rest. Try to get at least eight hours of sleep every night while you are recovering. You can also supplement your sleep by taking naps if you need to. Environmental irritants can also contribute to a wheezing cough sometimes. If you think that environmental irritants such as pollution, chemicals, and smoke may be aggravating or causing your wheezing cough, then you may want to wear a mask when you are exposed to these irritants. Cigarette smoke can be especially irritating when you have a wheezing cough. If you are smoker, then you should to try to quit smoking to get rid of your wheezing cough. Talk to your doctor about smoking cessation medications and programs that may help support your efforts to quit smoking. If your wheezing cough is a side effect of GERD, then eating smaller meals throughout the day may also help to get rid of it. Avoid eating large heavy meals and opt for smaller nutritious meals instead to help reduce the side effects of GERD and get rid of a wheezing cough associated with your GERD. Make sure that you do not eat too close to bedtime either. Try to stop eating about three to four hours before bedtime as well. | Gargle with salt water. Suck on cough drops. Run a humidifier. Get plenty of rest. Try wearing a mask when you go outside. Eat smaller meals. |
Fill a colander with your beans and turn your sink on. Run the beans under cool water and move the colander around so that water touches each side of the beans. Move your colander up and down and side-to-side to rotate your beans so that the entirety of each bean gets wet. You only need to soak uncooked pinto beans. If you’ve got a can of pinto beans, they’ve already been cooked and only need to be reheated. If you see any blackened or cracked beans, pick them out and throw them away. Add enough water to the bowl to fully submerge the beans. The beans are going to absorb a lot of water, so add enough to cover an additional 4–5 in (10–13 cm) on top of the beans. If a few beans float to the top, it just means that there's some air trapped in the shell. Don't worry about it, they’ll sink as they take on more water. Place your beans in the refrigerator. Let them soak for at least 24 hours. Soaking the beans allows them to absorb some water, making them a little more flavorful when you cook with them. If you don't soak your beans, they’ll take much longer to cook and they will taste a little chalky. They can also have some unpleasant digestive side effects if you don't soak them. | Rinse your pinto beans under cool water with a colander. Fill the bowl with water so the beans are covered by 4–5 in (10–13 cm) of water. Leave the beans in your refrigerator for at least 24 hours. |
"Clique Girls" are very clever in coming up with insults and coming up with new ways to take over their school. Don't be weird, but don't be normal. You have to find the perfect balance. Personality is important. If you are weird, then keep your thoughts in your head. Above all, don't be normal. Now, don't be egotistical, but people won't think you're somebody if *you* don't think that you're somebody. You need to convince people you're amazing. Looking the part will only get you halfway there. Walk the halls with your head held high and ooze confidence. Make a statement that says, "Yes. I am all that and don't mess with me." Remember to keep them clean! You need comebacks. Comebacks are important. That will show whomever is bothering you that they can't push you around anymore. Just don't use profanity, as it is not lady-like in any way. A good way to get comebacks is to write them down and develop creativity. Also, study the dictionary so your comebacks will work better. | Be clever. Be unique. Have pride in yourself. Have good comebacks. |
After you finish rolling the blanket, don't let go! Keep your hands on the blanket at all times so your blanket does not unroll. In addition, you can rest your knee on top of the blanket if you need extra assistance. If you have a friend around, you can ask them to hold the blanket for you as well. | Secure the blanket with your hands so it stays tight. |
Check each leaf or stalk for ruined pieces. Soiled herbs will have a bad taste, which could ruin the dish you season with your herbs. Insects are common in an herb garden, but you don't want them to get into your batch of dried herbs. Inspect each leaf for visible signs of insects, such as crawling bugs, webbing, or white spots that could be eggs. If you see these signs, throw that leaf or stalk away. The oven will treat the herbs for anything too small for you to see. It's best to use running water so that any dirt and debris flows away from the herbs. Allow the water to run over them for a few seconds, then gently shake them to expel the excess water. Place the damp herbs on a dry towel. If you have larger herbs, you could rinse them in a colander. Use another dry towel, gently pressing it over the herbs. Once the herbs are dry, transfer them to another dry towel or dish. | Remove any damaged, soiled, or imperfect leaves or stems. Check the herbs for insects. Rinse the herbs in cold water, shaking off the excess. Blot the herbs dry with a clean towel. |
Once you’re in the dress, pull up the left strap so that it covers your left shoulder. Pull up the right strap so that it is also on top of your left shoulder, and then twist the straps together to go down your back. Once the straps are twisted, they should resemble a rope. Bring one strap around the left side of your waist and the other strap around the right side before tying them in the front or back. If you would rather have the straps go on the opposite side, pull up both straps to cover your right shoulder before twisting. Bring both straps up to your left shoulder, making sure to cover your bust. Create a knot just below your shoulder with both straps before pulling the left strap under your arm so that it's back in the front. Bring the right strap across your back and around your waist to the right. Cross the straps in the front before tying them in the back. Making sure that both straps are in the front, pull the right strap over your left bust and the left strap over your right bust before wrapping them around your back. Once the straps are both in the back, cross them and bring them back to the front. Bring them around to the back one more time and tie in a bow or knot. Tucking the front of the dress into a strapless bra will help keep the dress in place. | Twist the straps to form a 1 shoulder dress. Tie a knot for an alternative 1 shoulder dress. Wrap the straps around your bust for a strapless dress. |
You can add additional keyboard layouts to your Windows installation that will allow you to type in different languages. This will make it easier to find the correct option. Keyboards and Languages tab. Click the Change keyboards... button. Add to install another language. A list of available languages will appear. Expand the language, and then expand the "Keyboard" option. Select the specific form of that language that you want by checking the box. Click OK to add the language. Languages will have multiple options if different regions speak different dialects. This is located in the taskbar, to the left of the System Tray and clock. The abbreviation for the active language will be displayed. Clicking the abbreviation will allow you to switch between your different input methods. You can also press ⊞ Win+Space to cycle through the installed languages. If you can't find the Language bar, right-click on the taskbar, select "Toolbars", and then click "Language bar" | Open the Control Panel. Click the "View by" drop-down menu and select "Large icons" or "Small icons". Select "Region and Language" and then click the . Click . Select the keyboard language you want to install. Switch between languages using the Language bar. |
Sometimes USB ports fail, so if you're running into problems getting your USB drive to work, try plugging it into another port on the computer. Avoid using USB hubs. USB hubs are devices that can connect multiple USB devices to a single USB port. They may not provide enough power for the USB drive. If the USB drive appears on another computer when you plug it in, then there is something going wrong with your computer and the way it connects to the USB drive. You may need to try updating or reinstalling your USB drivers, or your USB port might be malfunctioning. DRM stands for Digital Rights Management. It's not as common with music files, but files with DRM protection can only be played on certain devices when signed in to a specific account. Use the following steps to check if a music file has DRM protections: Right-click an MP3 or music file. Click Properties in the pop-up menu. Click the Details tab at the top of the Properties window. Check to see if it says Yes next to "Protected". If the USB drive isn't appearing, it may still be showing up to your system. If it appears in Disk Management or Disk Utility, you may be able to format and use it. Windows - Press ⊞ Win+R and type diskmgmt.msc. Look for your USB drive in the list of drives at the top of the window, or in the volume layout at the bottom of the window. Mac - Open the Utilities folder in your Applications folder, then run Disk Utility. Look for your USB drive in the list of drives on the left side of the window. If your drive is appearing in your disk utility, it may not be formatted in a compatible format for your operating system. Formatting the drive with the exFAT file system will allow you to use it on both Windows and Mac computers. All of the data currently on the drive will be erased during the format process. Windows - Right-click the drive in Disk Management and select "Format." Select "exFAT" as the file system, as this is compatible with most computers and devices. Mac - Select the USB drive and click the "Erase" tab. Select "ExFAT" from the Format menu and then click the "Format" button. If you need to format your flash drive to an older format such as FAT32, you can use a third-party app to format the flash drive. If you get a notification that there isn't enough space available, you may be trying to copy too much. Make sure that you have enough free space on the USB drive to copy the selected files. Note that the advertised space is usually more than the actual available space. The approximate number of songs you can store on flash drives of different sizes is listed below. | Try a different USB port. Try the drive on another computer. Check if your music has DRM protection. Look for your USB drive in Disk Management (Windows) or Disk Utility (Mac). Format your drive if it appears in Disk Management or Disk Utility. Ensure you're not trying to copy too much. |
You can create even zig-zag lines by moving your arm back and forth in a uniform way across the entire sheet of cake balls. To decorate the cake pops, you can either sprinkle by hand or dip them in the sprinkles while the chocolate is still in a liquid state, if you're not drizzling chocolate on top. To ensure a hard coating and for any topping to appear more uniform, place the cake balls in the freezer or refrigerator for about an hour or two. Now enjoy and serve your yummy cake pops! | Drizzle additional melted chocolate on top. Use the rainbow sprinkles on the cake balls. Chill the cake balls again. Finished. |
It's important that you don't force your dog to eat. The dog could feel nauseous and might vomit if she eats. Instead, let the dog do what she feels is natural. A dog not eating for up to 24 hours is no cause for concern. Even 48 hours without eating is okay if she is drinking water. Feed your dog in a room she doesn't normally eat in. The break with routine, curiosity factor, and the fact that she has no previous associations with nausea in the room can help kick start her appetite. If you are changing your dog's food, it could make her sick. Instead of making a sudden switch, phase in the new food as you phase out the old over a week. Watch your dog carefully to make sure the new food is agreeing with her and not making her sick. Sit beside your dog, dip your fingers into the canned food, and then offer them up to her mouth. This often does the trick. Try dabbing a bit of the food on the dog's nose or lip, so that she licks it off to clean herself and gets a taste of the food in her mouth. Sometimes tasting the food helps the dog to realize she is hungry and makes her want to try the food. Praising your dog while she eats may encourage her to start eating again. If she licks food from your hand, eats a bite from a spoon or bowl, or ingests anything else, give her lots of praise so that her good behavior is rewarded. You can also scratch your dog's head or neck while feeding her. However, only reserve this for genuinely sick dogs, or you may accidentally train your dog only to eat when hand fed. The most important thing is to be patient while your dog refuses to eat. It is frustrating when she refuses food, but venting your feelings will do nothing to help the dog's appetite. Don't take your frustrations out on your dog. If none of these tips work, take the dog to the vet. If your dog hasn't eaten in 24 to 48 hours, take her to the vet. Also, take her to the vet if she has been vomiting a lot or has persistent diarrhea. | Do not force the dog to eat. Try feeding in a new room. Introduce food slowly. Hand feed your dog. Give your dog praise while eating. Be patient and gentle with your dog. See the vet. |
Applying pressure to your gums with sterile gauze after pulling out a tooth can reduce pain and stop any bleeding that occurs. If your gums hurt or bleed a little after you pull out a tooth, then roll up a new piece of gauze and apply it to the tooth socket (gum area where the tooth was rooted). Apply pressure to the gums until the bleeding stops. The bleeding should stop within a few minutes. You can also use a wet teabag to soothe your gums after pulling out a tooth. Steep a teabag in hot water for a few minutes and then take it out and squeeze out some of the excess water. Then, let the teabag cool for a few minutes and apply it to your tooth socket to combat any pain that you feel. You can use green, black, peppermint, or chamomile tea to soothe your tooth. If the pain is still bothering you, then you can take a pain reliever such as acetaminophen or ibuprofen. Make sure that you read and follow the manufacturer's instructions for use. If the loose tooth is causing you pain or if you just can't seem to get it out, then call your dentist for an appointment. Your dentist can pull the tooth with the help of an anesthetic so that you will not feel any pain. In some cases, teeth may have a cyst or granuloma, which basically an infection, at the end of the root. Your dentist is the only person that can clean the socket and remove the infection, so you should consult them if you think this might be the case. | Apply pressure to your gums until the bleeding stops. Place a wet teabag over your tooth socket. Take an over-the counter pain reliever. See a dentist if the tooth won’t come out. |
This variety of hanger is sized to fit just over the height of an average brick. The back of these anchors have clamps you can set on the top and bottom of a brick on the narrow space where it sticks out past the mortar. Squeeze the clamps, and the anchor will stay on the brick. Since these anchors aren't fastened securely into the brick or mortar, however, they’re not meant to hold heavy items. Remove the backing from the hanger to reveal its sticky surface. Push this firmly onto the brick to fasten it in place. Use adhesive hooks that are labeled “heavy duty” to ensure they stick well to the brick. Don't hang anything on these hooks that is heavier than they are rated for. Use industrial strength double-sided tape to ensure it can stick well to brick. Remove the backing from 1 side and press the sticky surface firmly to the brick. Take off the backing from the other side and press the object you want to hang on top. Even industrial strength double-sided tape is best only for light objects, like pictures in cardboard frames. | Use “pinch” hangers. Stick adhesive hooks to brick. Apply pieces of double-sided tape to the wall. |
Most hiccups will go away on their own. Hiccups are often less disturbing to infants than they are to adults. If your baby seems bothered by the hiccups, is not feeding normally, or is not growing normally, see a doctor. If an infant is regularly hiccuping for over twenty minutes, this can be a symptom of gastroesophageal reflux disease (GERD) Other symptoms of GERD include spitting up and fussiness. A pediatrician may be able to prescribe medicine or provide recommendations on how you can help your baby cope with GERD. If you hear wheezing or the baby's breathing seems to be otherwise obstructed, take the infant to a doctor right away. | Give it time. Talk to a pediatrician if the baby's hiccups are abnormal. Talk to a pediatrician if the hiccups seem to be interfering with the baby's breathing. |
Crush aluminum foil into homemade "dryer balls" in order to reduce static cling when you tumble-dry your clothes. Compress the foil into two or three balls, each about two inches in diameter. Make sure that each ball is tight and smoothly-pressed so that it won't snag on the garments in the dryer. This can be a cheap and chemical-free alternative to commercial dryer sheets. You can continue to use the same dryer balls for months. When the balls start to come apart, replace them with freshly-crumpled foil. Be aware that the aluminum dryer ball will not soften your clothing like a commercial dryer sheet. Furthermore, it might make your dryer a bit noisier. Consider whether these downsides are worth the cost-effectiveness. A standard ironing board is designed to absorb heat and moisture. Aluminum foil will trap heat and moisture around your clothing, which should speed up the ironing process. Be aware of the risks of trapping high heat and moisture: if you aren't careful, you will greatly increase the chance of burning yourself. Use this method to steam garments that aren't iron-safe. Lay the the clothing on the aluminum foil, and hold the iron 1-2 inches above the fabric. Continually press the "steam" button to quickly steam out the wrinkles. First, line the inside of a bowl with aluminum foil. Then, fill the foil with warm water; one tablespoon of salt; one tablespoon of baking soda; and one teaspoon of dish soap. Soak your tarnished metal items: jewelry, silverware, coins, etc. Let the mixture do its work for ten minutes. Then, remove the metal items and dry them off. Fold a piece of aluminum foil until it is five or six layers thick. Then, cut it repeatedly with a pair of dulled scissors. This should gently sharpen the blades and increase the lifespan of the tool. Before you move a piece of furniture, cut up pieces of aluminum foil. Slide the foil pieces beneath the legs with the dull side down. These foil patches should help the furniture slide smoothly across the floor. Use crumpled-up aluminum foil like you would use steel wool. Scrub hard with the foil ball, and it should pick up most caked-on and burnt material. It may not be as effective as an actual cleaning product, but it will suffice in a pinch. Use foil to clean any metal: grills, bicycle parts, etc. | Remove static in the dryer. Line your ironing board with aluminum foil. Polish tarnished metal. Sharpen scissors. Slide heavy furniture on foil pads. Clean pots and pans. |
You’ll find the small metal clamps all around the outside edge of the sink. Depending on the clips, a screwdriver or wrench is needed. Loosen the clamps so you can rotate them to face towards the inside of the sink. The caulk is between the sink's rim and the countertop. Hold the knife as flat against the countertop as you possibly can while cutting into the caulking. Carefully cut all the way around the sink in order to free it. Push up on the sink's underside to make it easier to grasp. Set it aside, then use a putty knife to clear away any caulk left over on the countertop. Wash the countertop with soap and water, then dry it prepare it for your new sink. Also wash any parts you’ll use when installing your new sink, such as the faucets or drains. Try to lower the sink into the hole where it’ll rest. If it doesn't rest in there comfortably, you’ll need to make adjustments. You can cut away part of the countertop to fit a larger sink, but a smaller sink should be returned to the store and replaced. To fit a larger sink, flip the sink upside down over the hole and trace the outline. Then, cut the countertop to size with a jigsaw, router, or other cutting tool. To purchase the right size of sink, measure the length and width of your old sink. Remove the sink and flip it over. Use a silicone caulk to seal the sink. Run a bead of the caulk around the sink's perimeter. When done, flip the sink over and lower it carefully into the hole. Wipe away the excess caulk with a rag. Fasten the clips all around the sink's perimeter to secure the sink to the counter. Face the clips away from the sink with the open mouths towards the counter. Twist the screw on each clip with a screwdriver or wrench until they’re tight. Packs of sink clips can be purchased at any home improvement store. You can use your old clips as long as they’re not rusty and still clip on tightly. | Loosen the clips on the underside of the sink. Cut the caulk around the sink with a utility knife. Lift the sink and clean off the countertop. Check that the new sink fits. Seal the sink in place with caulk. Attach clips to the sink’s underside. |
You must satisfy any taxes owed to the government or negotiate a settlement with the IRS. Below is a list of some of the taxes that you may owe and documents that you may need to file: Payroll Taxes. Sales Tax. Social Security and Medicare taxes for employees. Federal and State Income Tax Returns. Tax reforms related to your Partnership or LLC or your Corporation. Employer Tax returns. Withholding statements. Contractor statements. Pension plans. The IRS provides a taxes-owed checklist for closing businesses and also identifies the documents that the business must file at: https://www.irs.gov/businesses/small-businesses-self-employed/closing-a-business-checklist. Once you have liquidated all of your assets, you should work to satisfy your financial obligations. You should start by paying employees by their last day of work or very soon after, depending on the laws of your state. Depending on your state, you may be required to compensate employees for their unused vacation time. If you have more than 100 employees, you must provide those employees with at least 60 days advance notice that the business is closing. Some states have similar requirements for businesses with less than 100 employees. Discuss this notification with your attorney and make sure that you are complying with all federal and state employment and labor laws. Locate records of services or products you have been paid for already but not completed. Return deposits to customers in full. Similarly, contact customers under ongoing contracts and settle the account according to the contract. If you are a party to a commercial lease, you must notify the lessor of your plan to close your business. You may be required to pay all rent due through the end of the lease. Review your lease to identify and understand any liabilities, penalties, or notices required, including the landlord's right. You may not have the right to sublease. An attorney should be involved if contention is likely. There are ways to reduce the amount that you are required to pay. If you can find another tenant to take over the space then you are only required to pay rent until the new tenant's lease starts. If you cannot find a new tenant, you may want to negotiate a set settlement amount with the landlord to buy yourself out of the lease. If you do not have substantial assets, a landlord may agree to this in order to get some amount of compensation. | File all required state and federal taxes. Pay your employees. Terminate ongoing contracts and refund deposits. Terminate your lease. |
Fanfiction is always based on an existing work of art. You are essentially making a story that expands or otherwise alters existing fiction. The mediums you might choose from are endless. Fanfics have been written about books, movies, television shows, video games, and just about anything else with a narrative base and a fandom to admire it. You should pick a fictional universe you already feel closely to. Common choices for fanfic are Star Wars, Harry Potter, and a number of anime and manga franchises. The choice of universe you choose to base your own work on will have the largest impact on your story and the way it turns out. Certain universes also favour certain approaches in fanfic. It's important to note however that your choices as a fanfic writer are limitless. You can do anything you want to the source material, even if that means transforming it into something else entirely. Most fanfiction tends to be based on a science-fiction or fantasy-themed universe, like Harry Potter or Star Trek. These are great to base fanfics off of because they offer huge universes with an endless amount of storytelling potential. Look online and read up everything you can about the given universe. Even if you're planning on breaking free of the established canon (what the author/director/etc has already established) with your fanfic, it helps a lot to know the rules before you break them. The best ideas you'll get for your work will be inspired by the source material itself. With that said, it still helps to see what other fans have done with the same ideas. Using a website like Fanfiction.net, Archive of Our Own, and Wattpad, or you can take a look through some fanfiction that matches your on source material. Read some stories people have written. Most importantly, get a grasp of the ways in which people use and adapt the source. In looking for fanfiction to read, you may get the looming impression that a lot of fanfiction lacks for quality. Being part of the fanfic community means acknowledging that not everyone is at the same level of skill. Most fanfiction is amateurish, and a lot of it frankly isn't worth reading. It takes patience to find the great stuff. | Choose source material to work from. Read up on the fictional universe. Read some fanfiction. |
The best paper to use for this is scrapbooking paper or cardstock. Construction paper or origami paper will work too, but your garland won't be as durable. Try getting two to three different colors or shades. For example, you could have a light blue, a medium blue, and a dark blue. Try getting some patterned paper. For example, half of your shapes can be bright blue, and the other half of your shapes can be white with bright green polka-dots or stripes. Scrapbooking punches work just like regular hole punches, except that they come in many different shapes and sizes. They come in circles, hearts, squares, stars, and even snowflakes. You can buy scrapbooking punches in the scrapbook section of an arts and crafts store. You can also find them online. You can get just one scrapbooking punch and make all of your shapes the same size. You can also get two differently sized punches. For example, you can get a 1.5 inch (3.81 centimeters) circle punch and a 3.5 inch (8.89 centimeters) circle punch. This will give your garland some variety. If you can't find a scrapbooking punch, you can cut circles out using a circle cutter. They can be as far apart or as close together as you want. Make sure that you have about 12 inches (30.48 centimeters) of blank space at the end of your garland, or you won't be able to hang it up later. Depending on how much glue you used, this can take anywhere from a couple of hours to a day. | Get some colorful paper. Get some scrapbooking punches. Repeat the process with the rest of the shapes. Allow the glue to dry before hanging your garland. |
Sometimes your need for space can be more serious than simply “needing to recharge.” If someone's actions upset you and that is why you want space from them, wait until you’ve cooled off to let them know. You'll be able to articulate better why you need space when you're feeling more level-headed. Especially if the conversation may grow heated, it is a good idea to rehearse the conversation ahead of time. Make an outline of your most important points. What do you need your friend to know? Once you have your outline, practice speaking in the mirror. You can always bring the outline with you if you think you may forget an important point. No matter how you go about it, the important thing is just to say what you need to say. Preparation is only effective up to a point. After that, you have to take the leap. Don't over think it and don't put it off. Just pick up the phone and call. You can always do this in person too, if it is easier for you. Avoid doing this online, however, as your words and intent could get misinterpreted. If you feel that your friend is frequently overwhelming your space or if you don't feel like your requests for space are being heard, you may need to set some boundaries. Healthy boundaries are the foundation of a healthy friendship. Explain which behaviors are okay, and which others are not. For example, maybe it is okay for them to email or call, but not okay from them to drop by unannounced. If you want to sever the friendship permanently, it's important to voice it. Don't put it off and give them false hope. Your need for space will not evaporate. When you need space, make sure you get it. Subtle approaches may work sometimes, but sometimes you need to be more direct. In those cases, you may need to assert your need for space more than once. Keep at it! Claiming the space you need is a powerful act of self-love! | Wait until you’re not angry. Practice what you are going to say. Just say it. Establish boundaries. Be persistent. |
If you struggle with neediness, you're probably a little lacking in the self-esteem department. You might be looking for your ex to make you feel better about yourself, but the fact is that you are the only person who can really do that. You shouldn't base your happiness on someone else. It makes them feel guilty, obligated and eventually, resentful towards you. Self-esteem is about believing that you are a person of worth and that you are adequate the way you are. When it comes to relationships, it is important that you feel complete and whole as an individual rather than looking for someone else to complete you or make your life worthwhile. To improve your self-esteem, concentrate on your strengths in all areas: emotional, social, talents and skills, appearance, and any others that are important to you. For example, you might have natural empathy, the ability to make people feel understood, a talent for baking, and gorgeous hair. Focusing on the positive and ignoring the negative can help you to feel adequate and valuable as an individual, especially when you connect the best parts of yourself to helping others. If you feel useless, make yourself useful! Take your natural empathy and talent for baking and bake some fresh cookies for your elderly neighbors. Try to think back to when the two of you first got together. What about you did he or she love? Was it your quirky jokes, or maybe your amazing sense of style. Whatever it may be, try to rekindle the fire the same way the flame was started before. Your ex was attracted to you because they felt good with you and you were fulfilling their emotional needs. How have you changed (if at all)? Correct bad habits and mistakes, if any. Be positive around them. Laugh and smile. Always stay positive to feel good about yourself and make yourself attractive to others. Get a few items of new clothing, alter your hairstyle, hit the gym, or do your nails. Make yourself stand out and seem fresh from what your ex remembers of you. While you do not want to change who you are in order to get your ex back (because eventually they would leave again, since the real you has to return at some point), it is always helpful to be the best you can be. Your ex was attracted to you and you can try to regain that attraction. You don't need to sleep with them, but spending time with other men or women will let your ex know that you are on the market for a relationship again. If they are still interested, they may decide it is time to step in and stop you from looking elsewhere. If you are not interested in dating others or leading them on, meet up with groups for movie night or spend time with a friend of the opposite sex. Just being around others who are single might be enough to make your ex a bit jealous. Do something non-committal like have a drink with friends or play miniature golf, including him or her with others. Make it something friends and first dates alike can do. And whatever it is, keep it fun and skip out on the serious talks for now. Every relationship should be built on a firm foundation of friendship, so it is important to make sure that your friendship is intact before trying to move to romance territory. If your ex has fallen into the friend zone (for example, if he or she says "I'm no longer in love with you"), you might be able to recreate the experience of falling in love by building intimacy with your ex. In one study, a researcher had two strangers stare into each other's eyes and then answer personal questions (like "What is your biggest fear?" and "What is your best memory from childhood?"). They were able to create an intimate bond between the strangers, creating attraction and even the feelings of love. Try spending time looking into your ex's eyes and asking deep questions and see if this helps move your relationship back into intimate territory. | Work on your self-esteem. Be the person your ex fell in love with. Improve your appearance. Spend time with other people. Casually hang out with your ex. |
One of the most notable contributions of deep learning is the application of convolutional neural networks to structured signal classification, and in particular image classification.Beyond their impressive performances in supervised learning, the structure of such networks inspired the development of deep filter banks referred to as scattering transforms.These transforms apply a cascade of wavelet transforms and complex modulus operators to extract features that are invariant to group operations and stable to deformations.Furthermore, ConvNets inspired recent advances in geometric deep learning, which aim to generalize these networks to graph data by applying notions from graph signal processing to learn deep graph filter cascades.We further advance these lines of research by proposing a geometric scattering transform using graph wavelets defined in terms of random walks on the graph.We demonstrate the utility of features extracted with this designed deep filter bank in graph classification of biochemistry and social network data, and in data exploration, where they enable inference of EC exchange preferences in enzyme evolution. | We present a new feed forward graph ConvNet based on generalizing the wavelet scattering transform of Mallat, and demonstrate its utility in graph classification and data exploration tasks. |
The first two missions are tutorial missions. The first mission is with Michael and Trevor, and the second mission is with Franklin. After successfully finishing the mission, you are now free to roam Los Santos and take missions at your own pace. Missions are marked with the initial of the mission giver on the map. Open the map and select a letter to get mini-map directions to the start of the mission. Walk or drive over the yellow circle on the ground to start a mission. You must be a certain character to start a mission. Micheals missions are marked with blue letters, Franklin's missions are marked with green letters, and Trevor's missions are marked with orange letters. The mobile phone feature is back. This feature is important in progressing through the game for it connects you to all the contacts that sometimes give you jobs. The mobile phone also allows you to access the internet which even broadens the scope of what you can do in GTA V. As you take on more missions, you will then earn lots of cash. You should learn to spend it wisely if you want to finish missions with a higher success rate. Most of the missions are usually dangerous and involves shooting and car chases. That being said, you will need to upgrade your weapon once in a while. You can buy weapons and other combat-related stuff from Ammu-Nation. You should also need to upgrade your vehicles, or at least the one you always use as a getaway vehicle. I can't stress enough how many police chases you will encounter in GTA V so it is in your best interest that you get yourself a dependable vehicle. Since you have 3 characters, missions are well distributed among these 3 characters. There’ll be times that you will run out of event missions. If that happens, that is the time to switch on to another character. By doing this, you will never run out of things to do. To get the most of GTA V, it is advisable for you to take all the missions available before you take on the main story missions. These side missions will not only improve your characters’ stats, but they are also rich in story and full of deep personalities. If you are planning to finish the game in 100%, this is the way to go. | Learn from the first mission. Go to missions on the map. Use your mobile phone. Spend wisely. Know when to switch. Play side missions. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.