commit stringlengths 40 40 | old_file stringlengths 2 205 | new_file stringlengths 2 205 | old_contents stringlengths 0 32.9k | new_contents stringlengths 1 38.9k | subject stringlengths 3 9.4k | message stringlengths 6 9.84k | lang stringlengths 3 13 | license stringclasses 13
values | repos stringlengths 6 115k |
|---|---|---|---|---|---|---|---|---|---|
61e8ff9fb9668b8ca8ba8f750a47a0d3f35601c5 | cirkit_unit03_driver/arduino/steer_ctrl/steer_ctrl.ino | cirkit_unit03_driver/arduino/steer_ctrl/steer_ctrl.ino | /**
Copyright (c) 2015, Yusuke Doi
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following... | /**
Copyright (c) 2015, Yusuke Doi
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following... | Remove unnecessary define and covert to enum | Remove unnecessary define and covert to enum
| Arduino | bsd-3-clause | CIR-KIT-Unit03/cirkit_unit03_robot,CIR-KIT-Unit03/cirkit_unit03_robot |
dce927901e531e534e940849fa1320f738c24902 | firmware/examples/readTag/readtag.ino | firmware/examples/readTag/readtag.ino | #include "pn532_i2c_particle/pn532_i2c_particle.h"
#include "pn532_i2c_particle/PN532.h"
#include "pn532_i2c_particle/NfcAdapter.h"
PN532_I2C pn532_i2c(Wire);
NfcAdapter nfc = NfcAdapter(pn532_i2c);
void setup(void) {
Serial.begin(9600);
Serial.println("NDEF Reader");
nfc.begin();
}
void loop(void) {
... | #include "pn532_i2c_particle/pn532_i2c_particle.h"
#include "pn532_i2c_particle/PN532.h"
#include "pn532_i2c_particle/NfcAdapter.h"
PN532_I2C pn532_i2c(Wire);
NfcAdapter nfc = NfcAdapter(pn532_i2c);
void setup(void) {
Serial.begin(9600);
Serial.println("NDEF Reader");
nfc.begin();
}
void loop(void) {
... | Update readTag to fetch just the payload from the messages on the tag | Update readTag to fetch just the payload from the messages on the tag
| Arduino | mit | reducedhackers/pn532nfcshield,reducedhackers/pn532nfcshield,reducedhackers/pn532_i2c_particle,reducedhackers/pn532_i2c_particle |
087a2465957eb0cf5f16fdb29e7a98a0d5480829 | examples/arduino/ex31_ard_listbox/ex31_ard_listbox.ino | examples/arduino/ex31_ard_listbox/ex31_ard_listbox.ino | //
// GUIslice Library Examples
// - Calvin Hass
// - https://www.impulseadventure.com/elec/guislice-gui.html
// - https://github.com/ImpulseAdventure/GUIslice
// - Example 31 (Arduino): Listbox + Scrollbar
// - Demonstrates Listbox control (single-column) with scrollbar
// - Shows callback notifications for Listbo... | //
// GUIslice Library Examples
// - Calvin Hass
// - https://www.impulseadventure.com/elec/guislice-gui.html
// - https://github.com/ImpulseAdventure/GUIslice
// - Example 31 (Arduino): Listbox + Scrollbar
// - Demonstrates Listbox control (single-column) with scrollbar
// - Shows callback notifications for Listbo... | Update ex31 for Teensy fonts | Update ex31 for Teensy fonts
| Arduino | mit | ImpulseAdventure/GUIslice,ImpulseAdventure/GUIslice |
7fd239858f39cf3420bc058d712d6a9695ffd692 | pingpong/pingpong.ino | pingpong/pingpong.ino | #define P1PIN 2
#define P2PIN 3
#define LONGPRESS_TIME 25
enum { BUTTON_NONE=0, BUTTON_SHORT, BUTTON_LONG};
class Button {
public:
Button(int pin, int longpress_time=LONGPRESS_TIME);
void init();
int handle();
protected:
boolean pressed;
int counter;
const int pin;
... | #include <LiquidCrystal.h>
LiquidCrystal lcd(12,11,5,4,3,2);
// End display setup
#define P1PIN 8
#define P2PIN 9
#define LONGPRESS_TIME 25
enum { BUTTON_NONE=0, BUTTON_SHORT, BUTTON_LONG};
class Button {
public:
Button(int pin, int longpress_time=LONGPRESS_TIME);
void init();
int... | Use an LCD display for now | Use an LCD display for now
| Arduino | mit | rubyist/pingduino,rubyist/pingduino |
118c18c3afb15e95363db4f1604aaf4f48fa5f55 | examples-ltc/2.Effects/2_CascadeDefault/DefaultCode-LightCascade.ino | examples-ltc/2.Effects/2_CascadeDefault/DefaultCode-LightCascade.ino | // Love to Code
// This is the default, out-of-box program loaded on the Chibi Chip:
// a cascade of fading LEDs, wiping from left to right
// The demo uses multi-threading to control every LED independently.
#include "ChibiOS.h"
int blink[6] = {0,0,0,0,0,0};
#define FADE_RATE 4
static THD_WORKING_AREA(blinky_are... | // Love to Code
// This is the default, out-of-box program loaded on the Chibi Chip:
// a cascade of fading LEDs, wiping from left to right
// The demo uses multi-threading to control every LED independently.
#include "ChibiOS.h"
int blink[6] = {0,0,0,0,0,0};
#define FADE_RATE 4
static THD_WORKING_AREA(blinky_are... | make it so default light cascade doesn't overlap | make it so default light cascade doesn't overlap
Jie requested that the light cascade do a single round of
effect at any given time.
| Arduino | mit | chibitronics/ltc-webview-layer,chibitronics/ltc-webview-layer,chibitronics/ltc-webview-layer,chibitronics/ltc-webview-layer |
0e7eb093c330daf0ae2795566df8cd5dc127ed56 | sketches/control/single_bench/single_bench.ino | sketches/control/single_bench/single_bench.ino | /**
* Control the BlinkMs for a single bench with one painting. Fire off
* the appropriate MaxMs at the correct intervals during the daily
* operational time.
*
* The MaxMs that actually control the light pattern for one group
* of LED clusters (Blasters) are preloaded with their light
* scripts. The MaxMs are c... | /**
* Control the BlinkMs for a single bench with one painting. Fire off
* the appropriate MaxMs at the correct intervals during the daily
* operational time.
*
* The MaxMs that actually control the light pattern for one group
* of LED clusters (Blasters) are preloaded with their light
* scripts. The MaxMs are c... | Fix nightly quiesce logic; minor other updates | Fix nightly quiesce logic; minor other updates
Fix the logic when the lights are quiescent at night. The bug was in the
MAXM1 loop where the LED controller was still fired off even though it
was after hours.
There are various other code cleanups, mostly in the debugging code, but
one visible change is that the activi... | Arduino | mit | wmadill/grant-lighting,wmadill/grant-lighting |
77226a2cdbea16e28db8c57baffd317bc08d36be | src/microController/microController.ino | src/microController/microController.ino | // Define ////////////////////////////////////////////////////////////////////////////////
#define X1_STEP_PIN 54 //X1->X
#define X1_DIR_PIN 55
#define X1_ENABLE_PIN 38
//#define X1_STOP_PIN 37
#define X2_STEP_PIN 60 //X2->Y
#define X2_DIR_PIN 61
#define X2_ENABLE_PIN ... | // Include ////////////////////////////////////////////////////////////////////////////////
#include <EEPROM.h>
// Define ////////////////////////////////////////////////////////////////////////////////
#define X1_STEP_PIN 54 //X1->X
#define X1_DIR_PIN 55
#define X1_ENABLE_PIN 38
... | Update for all changes | Update for all changes | Arduino | apache-2.0 | eric73847/Capstone-Project,eric73847/Capstone-Project,eric73847/Capstone-Project |
fba6c33d3ad83211f1f71ed53cece250bca4464f | protocol/modbus/lab/rs485_smodbus_master.ino | protocol/modbus/lab/rs485_smodbus_master.ino | #include <SimpleModbusMaster.h>
#define baud 19200
#define timeout 1000
#define polling 2000
#define retry_count 10
#define TxEnablePin 2
#define LED 9
//ID slave node
#define SLAVEID 10
#define SLAVEADDREG 1
#define rnoreg 1
#define TOTAL_NO_OF_REGISTERS 2
enum
{
PACKET1,
PACKET2,
TOTAL_NO_OF_PACKETS // le... | #include <SimpleModbusMaster.h>
#define baud 19200
#define timeout 1000
#define polling 2000
#define retry_count 10
#define TxEnablePin 2
#define ERRORLED 13
//ID slave node
#define SLAVEID 10
#define SLAVEADDREG 1
#define rnoreg 1
#define TOTAL_NO_OF_REGISTERS 2
enum
{
PACKET1,
PACKET2,
TOTAL_NO_OF_PACKETS... | Update rs485_smodbus_master.ino | Update rs485_smodbus_master.ino | Arduino | mit | pumanzor/security,pumanzor/security,pumanzor/security |
44f08e8a41747ebc8059f9a740b1f058f7a32666 | testing/arduino/omniwheel4_EncoderD.ino | testing/arduino/omniwheel4_EncoderD.ino | #include "Arduino.h"
uint8_t motorPin1_1 = 4;
uint8_t motorPin1_2 = 5;
uint8_t motorPin1_speed = 3;
uint8_t motorPin1_A = A7;
uint8_t motorPin2_1 = 7;
uint8_t motorPin2_2 = 8;
uint8_t motorPin2_speed = 6;
uint8_t motorPin2_A = A6;
uint8_t motorPin3_1 = 10;
uint8_t motorPin3_2 = 11;
uint8_t motorPin3_speed = 9;
uint8... | #include "Arduino.h"
uint8_t motorPin1_1 = 4;
uint8_t motorPin1_2 = 5;
uint8_t motorPin1_speed = 3;
uint8_t motorPin1_A = A7;
uint8_t motorPin2_1 = 7;
uint8_t motorPin2_2 = 8;
uint8_t motorPin2_speed = 6;
uint8_t motorPin2_A = A6;
uint8_t motorPin3_1 = 10;
uint8_t motorPin3_2 = 11;
uint8_t motorPin3_speed = 9;
uint8... | reduce size | reduce size
| Arduino | apache-2.0 | MaxMorgenstern/EmeraldAI,MaxMorgenstern/EmeraldAI,MaxMorgenstern/EmeraldAI,MaxMorgenstern/EmeraldAI,MaxMorgenstern/EmeraldAI |
835bbd31e5c3296bef64b10cefda122fbf65b9de | control/control.ino | control/control.ino | // Sketch to control the gimbal motor containing the polariser
// Gimbal controlled by Hobby King ESC. Connect black to ground
// and white to pin 10. (Note that you can only control servos
// on pin 9 and 10.) DO NOT CONNECT RED WIRE.
// Connect gate of transistor to pin 2.
// Run this sketch and then start the power... | // Sketch to control the gimbal motor containing the polariser
// Gimbal controlled by Hobby King ESC. Connect black to ground
// and white to pin 10. (Note that you can only control servos
// on pin 9 and 10.) DO NOT CONNECT RED WIRE.
// Connect gate of transistor to pin 2.
// Run this sketch and then start the power... | Check if gimbal already running Only start the motor if it's not already running | Check if gimbal already running
Only start the motor if it's not already running
| Arduino | mit | tomwphillips/polarimeter |
0a0059df85e34c8984b63763f8239b20cc3612a0 | LEDMatrixOneByOne/LEDMatrixOneByOne.ino | LEDMatrixOneByOne/LEDMatrixOneByOne.ino | /*
One by one light of a 8x8 LED Matrix is activated and deactivated afterwards.
This is useful to test if a self soldered construction works properly.
Documentation & Library
http://playground.arduino.cc/Main/LedControl
Arduino Uno | LEDMatrix MAX7219
pin 12 | DIN (data in)
pin 11 | CLK (clock)
pin... | /*
One by one light of a 8x8 LED Matrix is activated and deactivated afterwards.
This is useful to test if a self soldered construction works properly.
Documentation & Library
http://playground.arduino.cc/Main/LedControl
Arduino Uno | LEDMatrix MAX7219
pin 12 | DIN (data in)
pin 11 | CLK (clock)
pin... | Add LEDMatrixOneByOne multiple devices | Add LEDMatrixOneByOne multiple devices
| Arduino | mit | andpei/arduino-sketchbook,andpei/arduino-sketchbook |
523ff17982a026eb4f9d72834a74b2e86b0daa40 | examples/arduino/diag_ard_touch_detect/diag_ard_touch_detect.ino | examples/arduino/diag_ard_touch_detect/diag_ard_touch_detect.ino | //
// GUIslice Library Examples
// - Calvin Hass
// - https://www.impulseadventure.com/elec/guislice-gui.html
// - https://github.com/ImpulseAdventure/GUIslice
// - TFT Diagnostic (Arduino): Test Touch Pin Detection
// - This sketch is intended to detect and report the set of pins
// currently wired to a 4-wire r... | //
// GUIslice Library Examples
// - Calvin Hass
// - https://www.impulseadventure.com/elec/guislice-gui.html
// - https://github.com/ImpulseAdventure/GUIslice
// - TFT Diagnostic (Arduino): Test Touch Pin Detection
// - This sketch is intended to detect and report the set of pins
// currently wired to a 4-wire r... | Disable diagnostic pin detect for ESP8266 | Disable diagnostic pin detect for ESP8266
| Arduino | mit | ImpulseAdventure/GUIslice,ImpulseAdventure/GUIslice |
b5c2fd0414ad9d56bf0a35763f0ec80dfebdf09f | src/WiFiSensor/measurements.ino | src/WiFiSensor/measurements.ino | void dhtmeasure(){
//struct measurements tmp;
bool dhtOK = false;
int retries = 0;
if(dht1d5){
while( !dhtOK){ //Loop to wait for good DHT value
dhtOK = true; //assume it is going to work
dht.read();
lastmeasurement.humidity = dht.readHumidity();
if( isnan(lastmeasurement.humidity)){
dhtOK = false;
... | void dhtmeasure(){
//struct measurements tmp;
bool dhtOK = false;
int retries = 0;
if(dht1d5){
while( !dhtOK){ //Loop to wait for good DHT value
dhtOK = true; //assume it is going to work
dht.read();
lastmeasurement.humidity = dht.readHumidity();
if( isnan(lastmeasurement.humidity)){
dhtOK = false;
... | Fix 2 0.0.7 | Fix 2 0.0.7
| Arduino | apache-2.0 | brickmen/WiFiSensor,brickmen/WiFiSensor |
642a62afeac424163d8dd065a4b4edffb66b77f8 | examples/CalibrateESCs/CalibrateESCs.ino | examples/CalibrateESCs/CalibrateESCs.ino | #include "Wire.h"
#include "SPI.h"
#include "MINDS-i-Drone.h"
#include "platforms/Quadcopter.h"
void setup(){
calibrateESCs();
}
void loop(){
output.stop();
}
| #include "Wire.h"
#include "SPI.h"
#include "MINDS-i-Drone.h"
#include "platforms/Quadcopter.h"
void setup(){
calibrateESCs();
output.disable();
}
void loop(){
}
| Disable the output after calibrating instead of deprecated stop | Disable the output after calibrating instead of deprecated stop
| Arduino | apache-2.0 | MINDS-i/MINDS-i-Drone,MINDS-i/MINDS-i-Drone |
36c1d03f6313802abbb6ce15871769fa9c3bff88 | SMD_Control_Server/arduino_files/SMD_Server_Sketch/SMD_Server_Sketch.ino | SMD_Control_Server/arduino_files/SMD_Server_Sketch/SMD_Server_Sketch.ino | // John Davis
// Copyright 2015 3ML LLC
#include <Bridge.h>
#include <Process.h>
#include <FileIO.h>
int BLINK_LED = 0;
void setup() {
//Serial.begin(115200);
//while(!Serial);
//setup the environment
Bridge.begin();
while(!FileSystem.exists("/mnt/sda1/smd_server/SMDServer"))
delay(1000);
//s... | // John Davis
// Copyright 2015 3ML LLC
#include <Bridge.h>
#include <Process.h>
#include <FileIO.h>
#include <Console.h>
int BLINK_LED = 0;
void setup() {
//setup the environment
Bridge.begin();
Console.begin();
while(!FileSystem.exists("/mnt/sda1/smd_server/SMDServer"))
delay(1000);
//start ... | make the light go blinky when the server is running | make the light go blinky when the server is running
| Arduino | mit | davisjp1822/SMD_Control_Server,davisjp1822/SMD_Control_Server |
78cfce0f5c84512064046805eb50656747942bb5 | arduino/blinkytape_orb.ino | arduino/blinkytape_orb.ino | #include "FastLED.h"
// hardware
#define NUM_LEDS 12
#define LED_CORRECTION TypicalSMD5050
#define DATA_PIN 13
// visuals
#define PULSE_MAX_VAL 255
#define PULSE_MIN_VAL 160
#define PULSE_DURATION_SLOW 3000
#define PULSE_DURATION_MED 1500
#define PULSE_DURATION_FAST 0
#define CHANGE_MIN_VAL 64
#define CHANGE_DURATI... | #include "FastLED.h"
// hardware
#define NUM_LEDS 12
#define LED_CORRECTION TypicalSMD5050
#define DATA_PIN 13
#define BUTTON_IN 10
#define ANALOG_INPUT A9
#define EXTRA_PIN_A 7
#define EXTRA_PIN_B 11
// visuals
#define PULSE_MAX_VAL 255
#define PULSE_MIN_VAL 160
#define PULSE_DURATION_SLOW 3000
#define PULSE_DURATI... | Support the button on the BlinkyTape controller | Support the button on the BlinkyTape controller
| Arduino | mit | jtai/blinkytape-orb,jtai/blinkytape-orb |
41fbe93560b9b473bc691920322d57289b46b675 | libraries/ESP8266WebServer/examples/AdvancedWebServer/AdvancedWebServer.ino | libraries/ESP8266WebServer/examples/AdvancedWebServer/AdvancedWebServer.ino | /*
* Copyright (c) 2015, Majenko Technologies
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* * Redistributions of source code must retain the above copyright notice, this
* list of ... | /*
* Copyright (c) 2015, Majenko Technologies
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* * Redistributions of source code must retain the above copyright notice, this
* list of ... | remove mDNS from loop as well | AdvancedWebServer: remove mDNS from loop as well
| Arduino | lgpl-2.1 | Juppit/Arduino,KaloNK/Arduino,sticilface/Arduino,hallard/Arduino,esp8266/Arduino,martinayotte/ESP8266-Arduino,CanTireInnovations/Arduino,sticilface/Arduino,chrisfraser/Arduino,NullMedia/Arduino,quertenmont/Arduino,Cloudino/Cloudino-Arduino-IDE,Adam5Wu/Arduino,wemos/Arduino,chrisfraser/Arduino,esp8266/Arduino,gguuss/Ard... |
68cc1c21dc781d646d7a2c84d4d34f445b91e655 | ArduinoArcReactor/ArduinoArcReactor.ino | ArduinoArcReactor/ArduinoArcReactor.ino | /*
* ArcReactor
*
* Copyright (C) Marcin Badurowicz <m at badurowicz dot net> 2017
*
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files
* (the "Software"), to deal in the Software without restriction,
* including without limitation the ... | /*
* ArcReactor
*
* Copyright (C) Marcin Badurowicz <m at badurowicz dot net> 2017
*
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files
* (the "Software"), to deal in the Software without restriction,
* including without limitation the ... | fix not working applyall correctly | fix not working applyall correctly
| Arduino | mit | ktos/ArcReactor,ktos/ArcReactor |
bcbcb44e79ce9b5071935c1d9d3142c247ca13e9 | examples/FirebaseSerialTerminal_ESP8266/FirebaseSerialTerminal_ESP8266.ino | examples/FirebaseSerialTerminal_ESP8266/FirebaseSerialTerminal_ESP8266.ino | //
// Copyright 2015 Google Inc.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to ... | //
// Copyright 2015 Google Inc.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to ... | Remove unneeded header | Remove unneeded header
| Arduino | apache-2.0 | gguuss/firebase-arduino,aliafshar/firebase-arduino,aliafshar/firebase-arduino,FirebaseExtended/firebase-arduino,aliafshar/firebase-arduino,FirebaseExtended/firebase-arduino,gguuss/firebase-arduino,FirebaseExtended/firebase-arduino,gguuss/firebase-arduino |
61f00b8dc5733698e9ebce60fc1a49a0f5a673d2 | examples/IRrecvDumpV2/IRrecvDumpV2.ino | examples/IRrecvDumpV2/IRrecvDumpV2.ino | //------------------------------------------------------------------------------
// Include the IRremote library header
//
#include <IRremote.h>
//------------------------------------------------------------------------------
// Tell IRremote which Arduino pin is connected to the IR Receiver (TSOP4838)
//
int recvPin ... | //------------------------------------------------------------------------------
// Include the IRremote library header
//
#include <IRremote.h>
//------------------------------------------------------------------------------
// Tell IRremote which Arduino pin is connected to the IR Receiver (TSOP4838)
//
int recvPin ... | Update IRrecvDumpV2.ino | Update IRrecvDumpV2.ino
Fixed presentation & 2 bugs.
Presentation: No longer display leading space in timings, as is confusing to users & essentially irrelevant.
Bug Fix 1: rawData was starting with a space & would not work with sendRaw
Bug Fix 2: chaned x from unsigned int to nsigend long to avoid potential over... | Arduino | lgpl-2.1 | r2jitu/Arduino-IRremote,Seeed-Studio/IRSendRev,pcoughlin/Arduino-IRremote,swkyer/Arduino-IRremote,audetto/Arduino-IRremote,hafo821/Arduino-IRremote,ivankravets/Arduino-IRremote,audetto/Arduino-IRremote,AnalysIR/Arduino-IRremote,MadGarra/Arduino-IRremote,shirriff/Arduino-IRremote,YodaR10/Arduino-IRremote,danz0/Arduino-I... |
3423dda4cca2fad8ae11da7be7292844ff484ca6 | examples/More/SetProperty/SetProperty_MultiValue/SetProperty_MultiValue.ino | examples/More/SetProperty/SetProperty_MultiValue/SetProperty_MultiValue.ino | /**************************************************************
* Blynk is a platform with iOS and Android apps to control
* Arduino, Raspberry Pi and the likes over the Internet.
* You can easily build graphic interfaces for all your
* projects by simply dragging and dropping widgets.
*
* Downloads, docs, tuto... | /**************************************************************
* Blynk is a platform with iOS and Android apps to control
* Arduino, Raspberry Pi and the likes over the Internet.
* You can easily build graphic interfaces for all your
* projects by simply dragging and dropping widgets.
*
* Downloads, docs, tuto... | Fix build | Fix build
| Arduino | mit | ivankravets/blynk-library,ivankravets/blynk-library,ivankravets/blynk-library,blynkkk/blynk-library,blynkkk/blynk-library,blynkkk/blynk-library,ivankravets/blynk-library,ivankravets/blynk-library,blynkkk/blynk-library,blynkkk/blynk-library |
3e0649cf7b679589b0b702fe603c02b660deed1c | examples/Boards_Bluetooth/Adafruit_Feather_32u4_BLE/Adafruit_Feather_32u4_BLE.ino | examples/Boards_Bluetooth/Adafruit_Feather_32u4_BLE/Adafruit_Feather_32u4_BLE.ino | /**************************************************************
* Blynk is a platform with iOS and Android apps to control
* Arduino, Raspberry Pi and the likes over the Internet.
* You can easily build graphic interfaces for all your
* projects by simply dragging and dropping widgets.
*
* Downloads, docs, tuto... | /**************************************************************
* Blynk is a platform with iOS and Android apps to control
* Arduino, Raspberry Pi and the likes over the Internet.
* You can easily build graphic interfaces for all your
* projects by simply dragging and dropping widgets.
*
* Downloads, docs, tuto... | Fix #242 | Fix #242
| Arduino | mit | blynkkk/blynk-library,ivankravets/blynk-library,blynkkk/blynk-library,ivankravets/blynk-library,blynkkk/blynk-library,ivankravets/blynk-library,ivankravets/blynk-library,ivankravets/blynk-library,blynkkk/blynk-library,blynkkk/blynk-library |
bee6b5d6445fefa5b273cc805197ee7c5f1fde5e | examples/BasicSample/BasicSample.ino | examples/BasicSample/BasicSample.ino | #include <TeensyDelay.h>
//This callback function will be called after the delay period
void callback()
{
digitalWriteFast(LED_BUILTIN,LOW);
}
void setup()
{
pinMode(LED_BUILTIN,OUTPUT);
TeensyDelay::begin();
TeensyDelay::addDelayChannel(callback); // setup a delay channel and attach the callback function t... | #include <TeensyDelay.h>
//This callback function will be called after the delay period
void callback()
{
digitalWriteFast(LED_BUILTIN,LOW);
}
void setup()
{
pinMode(LED_BUILTIN,OUTPUT);
TeensyDelay::begin();
TeensyDelay::addDelayChannel(callback); // setup a delay channel and attach the callback function t... | Update BasicSample.ino | Update BasicSample.ino | Arduino | mit | luni64/TeensyDelay |
c945b967e2054744f5eae4ebf491077b48d32d3c | _03-hx711-scale-v2-battery-external-Interrupt/_03-hx711-scale-pro-mini/_03-hx711-scale-pro-mini.ino | _03-hx711-scale-v2-battery-external-Interrupt/_03-hx711-scale-pro-mini/_03-hx711-scale-pro-mini.ino | /*
A0, A1 --> HX711
A3, A4 --> I2C to esp8266 4, 5
2 - int 0 - tilt sw * 2- gnd : INPUT_PULLUP
4 - LED
10 - esp 13 : OUT - nemo is on pad
11 - esp reset : OUT - reset esp8266
12 - esp 12 : INPUT - wifi/mqtt status
*/
#include <avr/interrupt.h>
#include <avr/sleep.h>
#include "HX711.h"
#include <Wire.h>
... | /*
A0, A1 --> HX711
A3, A4 --> I2C to esp8266 4, 5
2 - int 0 - tilt sw * 2- gnd : INPUT_PULLUP
4 - LED
10 - esp 13 : OUT - nemo is on pad
11 - esp reset : OUT - reset esp8266
12 - esp 12 : INPUT - wifi/mqtt status
*/
#include <avr/interrupt.h>
#include <avr/sleep.h>
#include "HX711.h"
#include <Wire.h>
... | scale update | scale update
| Arduino | lgpl-2.1 | chaeplin/esp8266_and_arduino,chaeplin/esp8266_and_arduino,chaeplin/esp8266_and_arduino |
1b4ab08445eaea4720696f07b2db91b799f9d069 | examples/rtc/rtc.ino | examples/rtc/rtc.ino | //
// FaBo Brick Example
//
// FaBo RTC PCF2129
//
#include <Wire.h>
#include <FaBoRTC_PCF2129.h>
FaBoRTC_PCF2129 fabo_rtc;
void setup() {
Serial.begin(9600); // シリアルの開始
Serial.println();
Serial.println("RESET");
// デバイス初期化
Serial.println("Checking I2C device...");
if (fabo_rtc.searchDevice()) {
Ser... | //
// FaBo Brick Example
//
// FaBo RTC PCF2129
//
#include <Wire.h>
#include <FaBoRTC_PCF2129.h>
FaBoRTC_PCF2129 faboRtc;
void setup() {
Serial.begin(9600); // シリアルの開始
Serial.println();
Serial.println("RESET");
// デバイス初期化
Serial.println("Checking I2C device...");
if (faboRtc.searchDevice()) {
Seria... | Update example. | Update example.
| Arduino | apache-2.0 | FaBoPlatform/FaBoRTC-PCF2129-Library |
2291a2655e46e00393f768d99b1820fcdd1b0300 | main/main.ino | main/main.ino | #include <Canbus.h>
#include <defaults.h>
#include <global.h>
#include <mcp2515.h>
#include <mcp2515_defs.h>
#include <LiquidCrystal.h>
#include <math.h>
//RS,EN,DB4,DB5,DB6,DB7
LiquidCrystal lcd(14, 3, 4, 5, 6, 7);
int brightness = 255;
byte fill1[8] = {
B10000,
B10000,
B10000,
B10000,
B10000,
B10000,
... | #include <Canbus.h>
#include <defaults.h>
#include <global.h>
#include <mcp2515.h>
#include <mcp2515_defs.h>
#include <LiquidCrystal.h>
#include <math.h>
//RS,EN,DB4,DB5,DB6,DB7
LiquidCrystal lcd(14, 3, 4, 5, 6, 7);
int brightness = 255;
byte fill1[8] = {
B10000,
B10000,
B10000,
B10000,
B10000,
B10000,
... | print stats on serial | print stats on serial
| Arduino | apache-2.0 | srenner/meguinauge |
54e489282d422556a19acc7058a5d0d1673518a6 | examples/SoftWire_MLX90614/SoftWire_MLX90614.ino | examples/SoftWire_MLX90614/SoftWire_MLX90614.ino | #include <AsyncDelay.h>
#include <SoftWire.h>
/* SoftWire_MLX90614
*
* Code to demonstrate how to communicate with an SMBus device such as
* the MLX90614 non-contact infrared thermometer.
*
* Connections:
*
* For Calunium it is assumed the JTAG pins are used, SDA pin = 16
* (JTAG TDI) and SCL pin = 19 (JTAG TC... | #include <AsyncDelay.h>
#include <SoftWire.h>
/* SoftWire_MLX90614
*
* Code to demonstrate how to communicate with an SMBus device such as
* the MLX90614 non-contact infrared thermometer.
*
* Connections:
*
* For Calunium it is assumed the JTAG pins are used, SDA pin = 16
* (JTAG TDI) and SCL pin = 19 (JTAG TC... | Fix compile issue | Fix compile issue
Fixes Github issue #16
Thanks to [katkothaza](https://github.com/katkothaza).
| Arduino | lgpl-2.1 | stevemarple/SoftWire |
92b7b44ed7046a9456bbe08556042e452d940354 | firmware/examples/SparkFun_MPL3115A2_Example.ino | firmware/examples/SparkFun_MPL3115A2_Example.ino | /******************************************************************************
SparkFun_Basic_MPL3115A2_Example.ino
Joel Bartlett @ SparkFun Electronics
Original Creation Date: June 30, 2015
This sketch prints the barrometric preassure, altitude, and temperature F
to the Seril port.
Hardware Connections:
... | /******************************************************************************
SparkFun_Basic_MPL3115A2_Example.ino
Joel Bartlett @ SparkFun Electronics
Original Creation Date: June 30, 2015
This sketch prints the barrometric preassure, altitude, and temperature F
to the Seril port.
Hardware Connections:
... | Update SparkFun_MPL3115A2_Example.ino | Update SparkFun_MPL3115A2_Example.ino
Issues compiling example with the `../` in the header file's path. Removing. | Arduino | mit | sparkfun/SparkFun_MPL3115A2_Particle_Library |
b36049b20b499a4ab5696bc634d96904549dd364 | examples/BH1750FVI_Simple/BH1750FVI_Simple.ino | examples/BH1750FVI_Simple/BH1750FVI_Simple.ino |
// Includes: Wifi, MQTT, JSON
#include<ESP8266WiFi.h>
#include <PubSubClient.h>
#include <ArduinoJson.h>
// Includes: Sensors
#include <Wire.h>
#include "DHT.h"
#include <BH1750FVI.h>
// Defines: Wifi and MQTT
#define mqtt_server "192.168.1.8"
// Defines: Sensors
#define DHTPIN 2 //D4
#define DH... | /*
This is a simple example to test the BH1750 Light sensor
Connect the sensor to a NodeMCU ESP8266:
VCC <-> 3V3 [grey]
GND <-> Gnd [purple]
SDA <-> D2 [green]
SCL <-> D1 [blue]
ADDR <-> RX [yellow]
*/
#include <Wire.h>
#include <BH1750FVI.h>
// Settings
uint8_t ADDRESSPIN = 13... | Revert "Update BH1750FVI_Simple.ino" | Revert "Update BH1750FVI_Simple.ino"
This reverts commit 32fe05bbb80db305f6bcb70da35787dbdb53635b.
| Arduino | mit | PeterEmbedded/BH1750FVI |
df98cc5cb290319faf06e299e0089f32e3922289 | garden.ino | garden.ino | #include <SPI.h>
#include <SD.h>
#include <TFT.h> // Arduino LCD library
#include <Wire.h>
#include "RTClib.h"
#include <DHT11.h>
#define DHTPIN 11
#define DHTTYPE DHT11
#define sd_cs 12
#define lcd_cs 6
#define dc 7
#define rst 8
TFT screen = TFT(lcd_cs, dc, rst);
DHT dht(DHTPIN, DHTTYPE);
/*it's importa... |
#include <Wire.h>
#include "RTClib.h"
#include <math.h>
int BH1750address = 0x23; //setting i2c address
int light = 5;
int ph_probe = A0;
int water_temp = 13
byte buff[2];
RTC_Millis rtc;
void setup () {
Serial.begin(57600);
// following line sets the RTC to the date & time this sketch was compiled
rtc.... | Update garden.ino | Update garden.ino
totally revamped garden controller | Arduino | mit | treeherder/arduino_sketches,treeherder/arduino_sketches,treeherder/arduino_sketches,treeherder/arduino_sketches,treeherder/arduino_sketches,treeherder/arduino_sketches |
ab3909753b904b6fbd79736fe9efc3e7fb62ff8c | usb-to-octows2811/usb-to-octows2811.ino | usb-to-octows2811/usb-to-octows2811.ino |
#define USE_OCTOWS2811
#include<OctoWS2811.h>
#include<FastLED.h>
#include<ADC.h>
#define NUM_LEDS_STRIP_A 514
#define NUM_LEDS_STRIP_B 370
#define NUM_LEDS_STRIP_C 238
#define NUM_LEDS_STRIP_D 102
#define NUM_PIXELS_PER_SUPPLY (NUM_LEDS_STRIP_A + NUM_LEDS_STRIP_B + NUM_LEDS_STRIP_C + NUM_LEDS_STRIP_D)
#define NUM_SU... |
#define USE_OCTOWS2811
#include<OctoWS2811.h>
#include<FastLED.h>
#include<ADC.h>
#define NUM_LEDS_STRIP_A 514
#define NUM_LEDS_STRIP_B 370
#define NUM_LEDS_STRIP_C 238
#define NUM_LEDS_STRIP_D 102
#define NUM_PIXELS_PER_SUPPLY (NUM_LEDS_STRIP_A + NUM_LEDS_STRIP_B + NUM_LEDS_STRIP_C + NUM_LEDS_STRIP_D)
#define NUM_SU... | Fix strip ordering. | Fix strip ordering.
| Arduino | apache-2.0 | die-net/led-controller,die-net/led-controller,die-net/led-controller,die-net/led-controller |
425de9f8487c5b18d96f68d898f7b028f3a97ebb | esp8266_dht11_oled.ino | esp8266_dht11_oled.ino | #include <ESP8266WiFi.h>
#include <ESP8266HTTPClient.h>
#include <Adafruit_Sensor.h>
#include <DHT.h>
#include <DHT_U.h>
#include <U8g2lib.h>
#include "wifi_creds.h"
#define FINAL 0
#if FINAL
#define DEBUG_PRINTLN(...)
#define DEBUG_PRINT(...)
#else
#define DEBUG_PRINTLN(...) Serial.println(__VA_ARGS__)
#define DE... | #include <ESP8266WiFi.h>
#include <ESP8266HTTPClient.h>
#include <Adafruit_Sensor.h>
#include <DHT.h>
#include <DHT_U.h>
#include <U8g2lib.h>
#include "wifi_creds.h"
#define FINAL 0
#if FINAL
#define DEBUG_PRINTLN(...)
#define DEBUG_PRINT(...)
#else
#define DEBUG_PRINTLN(...) Serial.println(__VA_ARGS__)
#define DE... | Add powersave code | Add powersave code
| Arduino | mit | slurdge/esp8266_dht11_oled,slurdge/esp8266_dht11_oled,slurdge/esp8266_dht11_oled,slurdge/esp8266_dht11_oled |
a7749d45dc7bf6630d5f9a880190c48fb4167345 | examples/adsr/adsr.ino | examples/adsr/adsr.ino | /*
* #### ####
* #### ####
* #### #### ##
* #### #### ####
* #### ############ ############ #### ########## #### ... | /*
* #### ####
* #### ####
* #### #### ##
* #### #### ####
* #### ############ ############ #### ########## #### ... | Fix bug in loading ADSR parameters. | Fix bug in loading ADSR parameters.
| Arduino | bsd-3-clause | logickworkshop/du-ino,logickworkshop/du-ino |
c40db44d1a9534f43bc5ff6d3bddf04e6f7cf432 | examples/adsr/adsr.ino | examples/adsr/adsr.ino | /*
* #### ####
* #### ####
* #### #### ##
* #### #### ####
* #### ############ ############ #### ########## #### ... | /*
* #### ####
* #### ####
* #### #### ##
* #### #### ####
* #### ############ ############ #### ########## #### ... | Move switch configuration to subclass definition. | Move switch configuration to subclass definition.
| Arduino | bsd-3-clause | logickworkshop/du-ino,logickworkshop/du-ino |
03673b47fa1cc950734baffb9bb8313629c366f9 | libraries/CurieBle/examples/LED/LED.ino | libraries/CurieBle/examples/LED/LED.ino | /*
Copyright (c) 2015 Intel Corporation. All rights reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later v... | /*
Copyright (c) 2015 Intel Corporation. All rights reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later v... | Use dashed UUID in example | Use dashed UUID in example
| Arduino | lgpl-2.1 | sandeepmistry/corelibs-arduino101,eriknyquist/corelibs-arduino101,eriknyquist/corelibs-arduino101,linrjing/corelibs-arduino101,bigdinotech/corelibs-arduino101,01org/corelibs-arduino101,sandeepmistry/corelibs-arduino101,01org/corelibs-arduino101,SidLeung/corelibs-arduino101,sgbihu/corelibs-arduino101,facchinm/corelibs-a... |
6897bcb9f281fffee13a6cc6e922b71186f2aee0 | firmware/examples/toggle/toggle.ino | firmware/examples/toggle/toggle.ino | #if defined (SPARK)
#include "Adafruit_MCP23017/Adafruit_MCP23017.h"
#else
#include <Wire.h>
#include "Adafruit_MCP23017.h"
#endif
// Basic pin reading and pullup test for the MCP23017 I/O expander
// public domain!
// Connect pin #12 of the expander to Analog 5 (i2c clock)
// Connect pin #13 of the expander to Analo... | #if defined (SPARK)
#include "Adafruit_MCP23017/Adafruit_MCP23017.h"
#else
#include <Wire.h>
#include "Adafruit_MCP23017.h"
#endif
// Basic pin reading and pullup test for the MCP23017 I/O expander
// public domain!
// Connect pin #12 of the expander to Analog 5 for Arduino and D1 for Spark Core (i2c clock)
// Conne... | Update comments for Spark | Update comments for Spark | Arduino | bsd-3-clause | pkourany/Adafruit_MCP23017_IDE |
c68bcdbb91bdf55ee4135148b1b2a8ab315f37c5 | Relay/Relay.ino | Relay/Relay.ino | #include <stdio.h>
#include <stdlib.h>
#define IN_1 6 // White/Green cable, Arduino Digital I/O pin number
#define IN_2 7 // Yellow/Black cable, Arduino Digital I/O pin number
void setup() {
Serial.begin(9600); //begin reading at this baud rate
//set pins as outputs
pinMode(IN_1, OUTPUT);
pinMode(IN_2, OUT... | #include <stdio.h>
#include <stdlib.h>
#define IN_1 6 // White/Green cable, Arduino Digital I/O pin number
#define IN_2 7 // Yellow/Black cable, Arduino Digital I/O pin number
#define IN_3 8
#define IN_4 9
void setup() {
Serial.begin(9600); //begin reading at this baud rate
//set pins as outputs
pinMode(IN_1, ... | Update Relay.ino | Update Relay.ino | Arduino | bsd-2-clause | fnoorian/Free-buck-boost,fnoorian/Free-buck-boost,fnoorian/Free-buck-boost |
422c4651f7f539797dddb2ec258e3196e13e1c66 | OpenStage/openStage_SerialFunctions.ino | OpenStage/openStage_SerialFunctions.ino | //------------------------------------------------------------------------------------------------
// This file contains functions necessary for controlling OpenStage via the serial port
//------------------------------------------------------------------------------------------------
//Based on code from The Arduino... | //------------------------------------------------------------------------------------------------
// This file contains functions necessary for controlling OpenStage via the serial port
//------------------------------------------------------------------------------------------------
//Based on code from The Arduino... | Remove if statement. | Remove if statement.
| Arduino | agpl-3.0 | raacampbell13/openstage,raacampbell13/openstage |
96cfbacc8b863ef260df4fd0b5f422c6dd99a042 | Melodies/SonarPiano.ino | Melodies/SonarPiano.ino | #include "pitches.h"
//Distance ThreshHold
int ThreshHold = 50;
//Full Range of Piezo Frequencies as Pitches
int Tones[] = {
NOTE_B0, NOTE_C1,NOTE_CS1, NOTE_D1,NOTE_DS1,
NOTE_E1, NOTE_F1, NOTE_FS1, NOTE_G1, NOTE_GS1,
NOTE_A1,NOTE_AS1, NOTE_B1,NOTE_C2,NOTE_CS2,
NOTE_D2,NOTE_DS2,NOTE_E2,NOTE_F2,NOTE_FS2,... | #include "pitches.h"
/**Distances Corresponding to TonesO4 array values with current settings:
* 0: 15-16
* 1: 17-18
* 2: 19-20
* 3: 21-22
* 4: 23-24
* 5: 25
* 6: 26-27
* 7: 28-29
* 8: 30-31
* 9: 32-33
* 10: 34
* 11: 35
*
* Beware of noise, make sure space is totally cleared
* and accoun... | Update SonarPiano.ino | Update SonarPiano.ino | Arduino | mit | celeryellery/CSS427FinalProject,celeryellery/CSS427FinalProject |
313b3aae47c643fb3cfc43ebbb85029f75a822d5 | DiplayTemp/DiplayTemp.ino | DiplayTemp/DiplayTemp.ino | //
// Display Temp
//
#include <VirtualWire.h>
#include <Wire.h>
#include <LCD.h>
#include <LiquidCrystal_I2C.h>
#include <CapacitiveSensor.h>
#define I2C_ADDR 0x27 // <<----- Add your address here. Find it from I2C Scanner
#define BACKLIGHT_PIN 3
#define En_pin 2
#define Rw_pin 1
#define Rs_pin 0
#define D4_pi... | //
// Display Temp
//
// Use Library from :
// Adafruit BMP085 https://github.com/adafruit/Adafruit_BMP085_Unified
// Adafruit Sensor https://github.com/adafruit/Adafruit_Sensor
// Finite State Machine http://arduino-info.wikispaces.com/HAL-LibrariesUpdates
// LCD : https://bitbucket.org/fmalpartida/new-liquidcrystal/... | Add pressure sensor | Add pressure sensor
+ WIP on finite state machine
| Arduino | mit | totothekiller/weather-station,totothekiller/weather-station |
614c7f792edb20435db78b0e7c9f47f7f6209215 | DriveTrain/DriveTrain.ino | DriveTrain/DriveTrain.ino | /*
Copyright (c) 2014, Rishi Desai
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this
list of conditions and the following di... | /*
Copyright (c) 2014, Rishi Desai
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this
list of conditions and the following di... | Update DriveTrain.ino | Update DriveTrain.ino | Arduino | bsd-2-clause | Talos4757/NVIDIABot,apache8080/NVIDIABot |
b261b2c940d8b808972fc6162e1c41e758f8fec3 | Arduino/AlphaChairArduino/AlphaChairArduino.ino | Arduino/AlphaChairArduino/AlphaChairArduino.ino | #include <SoftwareSerial.h>
#include <Thread.h>
#define PPR_ON "a"
#define PPR_OFF "b"
#define FSR_ON "c"
#define FSR_OFF "d"
#define TMP_ON "e"
#define TMP_OFF "f"
Thread fsrThread = Thread(); // For measuring Pressure data in other thread
// Mosfet channel
int MOSFET_C1 = 10;
int MOSFET_C2 = 7;
// UNO board
int I... | #include <SoftwareSerial.h>
#include <Thread.h>
#define PPR_ON "a"
#define PPR_OFF "b"
#define FSR_ON "c"
#define FSR_OFF "d"
#define TMP_ON "e"
#define TMP_OFF "f"
Thread fsrThread = Thread(); // For measuring Pressure data in other thread
// Mosfet channel
int MOSFET_C1 = 10;
int MOSFET_C2 = 7;
// UNO board
int I... | set posture msg | set posture msg
| Arduino | apache-2.0 | quki/AlphaChair |
959b6d11de8260100668bdf91247074c135a9950 | Cymatic-Triangles/Mic.ino | Cymatic-Triangles/Mic.ino | #include "Wisp.h" /* Import Wisp class */
#include <FastLED.h>
#include "SPI.h" // Comment out this line if using Trinket or Gemma
#include <Audio.h>
#include <Wire.h>
#include <SPI.h>
#include <SD.h>
#include <SerialFlash.h>
#include <math.h>
#define NUM_MIC_LEDS 28
#define MIC_DATA_PIN 8
#define MAX_ROTATIONS_PER... | #include "Wisp.h" /* Import Wisp class */
#include <FastLED.h>
#include "SPI.h" // Comment out this line if using Trinket or Gemma
#include <Audio.h>
#include <Wire.h>
#include <SPI.h>
#include <SD.h>
#include <SerialFlash.h>
#include <math.h>
#define NUM_MIC_LEDS 28
#define MIC_DATA_PIN 8
#define MAX_ROTATIONS_PER... | Use ticks in constants get consistency in visuals | Use ticks in constants get consistency in visuals
| Arduino | artistic-2.0 | CymaSpace/Light-Installations |
fddf28e6d9406ff88bb381e66bd97564eb40f9fe | test/test.ino | test/test.ino | /*
BUFSM
~~~~~~~~
Send coordinates over wi-fi using ESP-8266
*/
#include <ESP8266WiFi.h>
#include <ESP8266HTTPClient.h>
const char* ssid = "AP-PREDIO320";
const char* password = "naocompilavei";
const char* host = "bufsm.dalmago.xyz";
String url = "/api/things";
WiFiClient client;
char* lng[]={"-29.71946... | /*
BUFSM
~~~~~~~~
Send coordinates over wi-fi using ESP-8266
*/
#include <ESP8266WiFi.h>
#include <ESP8266HTTPClient.h>
const char* ssid = "USER";
const char* password = "PASSW";
const char* host = "bufsm.dalmago.xyz";
String url = "/api/things";
WiFiClient client;
char* lng[]={"-29.71946","-29.71943","-... | Update test.ino | Update test.ino | Arduino | mit | bufsm/bufsm,bufsm/bufsm,bufsm/bufsm,bufsm/bufsm,bufsm/bufsm |
c857dd42cf0b0e2262c80b44d9b868fa835ff333 | mimmon.ino | mimmon.ino | #include <Arduino.h>
#include <ESP8266WiFi.h>
#include <ESP8266WiFiMulti.h>
#include <ESP8266HTTPClient.h>
#include <WiFiClientSecureBearSSL.h>
// Base URL for HTTP GET requests.
String kBaseUrl = "https://docs.google.com/forms/d/e/YOUR_SPREADSHEET_ID/formResponse?entry.ENTRY_CODE=";
// WiFi SSID and password.
constex... | #include <Arduino.h>
#include <ESP8266HTTPClient.h>
#include <ESP8266WiFi.h>
#include <ESP8266WiFiMulti.h>
#include <ESP_EEPROM.h>
#include <WiFiClientSecureBearSSL.h>
String kBaseUrl = "https://docs.google.com/forms/d/e/YOUR_SPREADSHEET_ID/formResponse?entry.ENTRY_CODE=";
constexpr char kApSsid[] = "YOUR_SSID";
cons... | Add EEPROM for persistent pulse counts. | Add EEPROM for persistent pulse counts.
| Arduino | apache-2.0 | AaronWebster/mimmon,AaronWebster/mimmon,AaronWebster/mimmon |
4cd5d739e19245cedb8466c23f9c3d5461960c98 | arduino/edison2fiware.ino | arduino/edison2fiware.ino |
//################# LIBRARIES ################
#include <SPI.h>
#include <WiFi.h>
//################# WIFI DETAILS #################
char ssid[] = "OWDTEST"; // your network SSID (name)
char pass[] = "tidowd22"; // your network password (use for WPA, or use as key for WEP)
int keyIndex = ... |
//################# LIBRARIES ################
#include <SPI.h>
#include <WiFi.h>
//################# WIFI DETAILS #################
char ssid[] = "OWDTEST"; // your network SSID (name)
char pass[] = "tidowd22"; // your network password (use for WPA, or use as key for WEP)
int keyIndex = ... | Update edison2fiware.ino | Update edison2fiware.ino | Arduino | agpl-3.0 | telefonicaid/fiware-edison,telefonicaid/fiware-edison,telefonicaid/fiware-edison,telefonicaid/fiware-edison |
85a6e53b5be73db91ccaa138d3cb6118271f9048 | phase2.ino | phase2.ino | #include <cops_and_robbers.h>
#include <nRF24L01.h>
#include <packet.h>
#include <radio.h>
#include <sensor_struct.h>
#include <spi.h>
#include <scheduler.h>
#define HIGH_BYTE(x) x>>8
#define LOW_BYTE(x) x & 0x00FF
// constants won't change. They're used here to
// set pin numbers:
const int joystick... | #include <cops_and_robbers.h>
#include <nRF24L01.h>
#include <packet.h>
#include <radio.h>
#include <sensor_struct.h>
#include <spi.h>
#include <scheduler.h>
#define HIGH_BYTE(x) x>>8
#define LOW_BYTE(x) x & 0x00FF
// constants won't change. They're used here to set pin numbers:
const int joystick_x_pi... | rework phase2.ino to only send packets with the most recent input | rework phase2.ino to only send packets with the most recent input
| Arduino | mit | paulmoon/csc460,paulmoon/csc460,paulmoon/csc460 |
09e6299167527ccb545db826a6313768e5841d5d | arduino/blinkytape_orb.ino | arduino/blinkytape_orb.ino | #include <EEPROM.h>
#include <FastLED.h>
#include "visuals.h"
#include "state.h"
// hardware
#define NUM_LEDS 12
#define LED_CORRECTION TypicalSMD5050
#define COLOR_TEMPERATURE OvercastSky
#define DATA_PIN 13
#define BUTTON_IN 10
#define ANALOG_INPUT A9
#define EXTRA_PIN_A 7
#define EXTRA_PIN_B 11
#define EEPROM_ST... | #include <EEPROM.h>
#include <FastLED.h>
#include "visuals.h"
#include "state.h"
// hardware
#define NUM_LEDS 12
#define LED_CORRECTION TypicalSMD5050
#define COLOR_TEMPERATURE OvercastSky
#define DATA_PIN 13
#define BUTTON_IN 10
#define ANALOG_INPUT A9
#define EXTRA_PIN_A 7
#define EXTRA_PIN_B 11
#define EEPROM_ST... | Remove redundant call to FastLED.show() | Remove redundant call to FastLED.show()
| Arduino | mit | jtai/blinkytape-orb,jtai/blinkytape-orb |
93b524b36b078f7f434eaaf86d1f3918f5a2c8d3 | arduino/loopFunctions.ino | arduino/loopFunctions.ino | SENS readSensors() {
SENS temp;
// These are temporary values, but needs to be changed to actual sensor readings
temp.pressure = 3024;
temp.temp = 18.3;
temp.volt = 10.8;
temp.gyr.ax = 0;
temp.gyr.ay = 0;
temp.gyr.az = 0;
temp.gyr.compass = 0;
temp = mpuLoop(temp); // read orientation
return t... | SENS readSensors() {
SENS temp;
// These are temporary values, but needs to be changed to actual sensor readings
temp.pressure = 3024;
temp.temp = 18.3;
temp.volt = 10.8;
temp.curr = 2.12;
temp.gyr.ax = 0;
temp.gyr.ay = 0;
temp.gyr.az = 0;
temp.gyr.compass = 0;
temp = mpuLoop(temp); // read orien... | Update loopFunctions.ino | Update loopFunctions.ino | Arduino | mit | martinloland/rov,martinloland/rov |
30f6c279e3dd9443219e83f6e0790810d31a563e | temp/ffdgjghk.ino | temp/ffdgjghk.ino | #include <SoftwareSerial.h>
SoftwareSerial mySerial(10, 11);
int c=0;
uint8_t message[60];
uint8_t CK_A = 0, CK_B = 0;
uint8_t CK_AU = 0, CK_BU = 0;
int gpsStep = 0;
uint8_t UBX_id = 0;
uint8_t UBX_class = 0;
uint8_t meslenL = 0;
uint8_t meslenH = 0;
int16_t meslen = 0;
int count = 0;
boolean gotUBX = fal... | #include <SoftwareSerial.h>
SoftwareSerial mySerial(10, 11);
int c=0;
uint8_t message[60];
uint8_t CK_A = 0, CK_B = 0;
uint8_t CK_AU = 0, CK_BU = 0;
int gpsStep = 0;
uint8_t UBX_id = 0;
uint8_t UBX_class = 0;
uint8_t meslenL = 0;
uint8_t meslenH = 0;
int16_t meslen = 0;
int count = 0;
boolean gotUBX = fal... | Update ffdgjghk.ino | Update ffdgjghk.ino | Arduino | apache-2.0 | volodink/ubx-decoder-embedded,volodink/ubx-decoder-embedded,volodink/ubx-decoder-embedded |
5760ed5a3c5d96bde37a479e5923db0b73852b61 | sheild_sdlog_gps_color/sheild_sdlog_gps_color.ino | sheild_sdlog_gps_color/sheild_sdlog_gps_color.ino | #include <SPI.h>
#include <Adafruit_GPS.h>
#include <SoftwareSerial.h>
#include <SD.h>
#include <Wire.h>
#include <Adafruit_TCS34725.h>
#include <avr/sleep.h>
// Code hacked together by Nick Meehan - unsalted.nu
// In association with: Art Center College of Design - Media Design Practices - MFA
//
// This code is a co... | #include <SPI.h>
#include <Adafruit_GPS.h>
#include <SoftwareSerial.h>
#include <SD.h>
#include <Wire.h>
#include <Adafruit_TCS34725.h>
#include <avr/sleep.h>
// Code hacked together by Nick Meehan - unsalted.nu
// In association with: Art Center College of Design - Media Design Practices - MFA
//
// This code is a co... | remove attempt at UTC | remove attempt at UTC
| Arduino | mit | unsalted/color_station |
a8c500a65be7c3194bdc004ffaa49041cd3e34d9 | IoT_Agriculture/IoT_Agriculture.ino | IoT_Agriculture/IoT_Agriculture.ino | #include <SoftwareSerial.h>
#include <ESP8266WiFi.h>
#include <SimpleDHT.h>
#include "ThingSpeak.h"
#include "DHT.h"
#include "Server.h"
#include "Network.h"
#include "Setting.h"
#include "Photoresistor.h"
#include "WaterLevelSensor.h"
unsigned long monitorChannel = 169688;
const char *monitorWrite = "GB91TIAKXFPD6JNX... | #include <SoftwareSerial.h>
#include <ESP8266WiFi.h>
#include <SimpleDHT.h>
#include "ThingSpeak.h"
#include "DHT.h"
#include "Server.h"
#include "Network.h"
#include "Setting.h"
#include "Photoresistor.h"
#include "WaterLevelSensor.h"
unsigned long monitorChannel = 169688;
const char *monitorWrite = "GB91TIAKXFPD6JNX... | Update IoT_Agriculture.ino | Update IoT_Agriculture.ino | Arduino | mit | Raydivine/IoT-for-Modern-Agriculture,Raydivine/IoT-for-Modern-Agriculture |
b444504c57654b84ee5265d2e29ac1c4032da223 | examples/Ports/isp_repair2/isp_repair2.ino | examples/Ports/isp_repair2/isp_repair2.ino | // Reflash a boot loader and a sketch an a second ATmega.
// 2010-05-29 <jc@wippler.nl> http://opensource.org/licenses/mit-license.php
//
// see http://jeelabs.org/2011/05/29/summary-of-isp-options/
// This code is adapted from isp_prepare. It omits the button and run LED,
// and starts right away. To use, open a seri... | // Reflash a boot loader and a sketch an a second ATmega.
// 2010-05-29 <jc@wippler.nl> http://opensource.org/licenses/mit-license.php
//
// see http://jeelabs.org/2011/05/29/summary-of-isp-options/
// This code is adapted from isp_prepare. It omits the button and run LED,
// and starts right away. To use, open a seri... | fix breakage due to IDE 1.0 changes | fix breakage due to IDE 1.0 changes
| Arduino | unlicense | jcw/jeelib,jcw/jeelib |
610487a1f1fd999ecd415f60617c51349cb29593 | esp12/esp/esp.ino | esp12/esp/esp.ino | #include <TinyGPS++.h>
#include <SoftwareSerial.h>
#include <ESP8266HTTPClient.h>
#include <ESP8266WiFi.h>
#include <ArduinoJson.h>
#include <DHT.h>
#include "FS.h"
//device serial number
const char* serialNo = "0123a";
// gps
static const int RXPin = 5, TXPin = 4;
static const uint32_t GPSBaud = 9600;
// The TinyGPS... | #include <TinyGPS++.h>
#include <SoftwareSerial.h>
#include <ESP8266HTTPClient.h>
#include <ESP8266WiFi.h>
#include <ArduinoJson.h>
#include <DHT.h>
#include "FS.h"
/*
//display -------------------------------------------------------------------
#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Ad... | Update esp.ino | Update esp.ino
Added photoresistor to the device. Tried to add a oled display to indicate the device serial number. But the power is no enough and some of the sensors stoped working, so for the moment there isn't one. | Arduino | mit | nikolatzotchev/PackageTrack,nikolatzotchev/PackageTrack,nikolatzotchev/PackageTrack,nikolatzotchev/PackageTrack,nikolatzotchev/PackageTrack,nikolatzotchev/PackageTrack |
ca010bf342df14f56b3759c590c97beaeea95ac5 | resilient_network/resilient_network.ino | resilient_network/resilient_network.ino | // resilient network
#include <SoftwareSerial.h>
#include "Arduino.h"
#include "timers.h"
#define leds1pin 11
#define leds2pin 3
#define button1pin 2
#define button2pin 4
#define SERIAL_DEBUG true
#define DROPPING_CONNECTOR 254
#define ALERT 255
#define NUM_CONN 3
SoftwareSerial* bus[NUM_CONN];
int RX[NUM_CONN] =... | // resilient network
#include <SoftwareSerial.h>
#include "Arduino.h"
#include "timers.h"
#define leds1pin 11
#define leds2pin 3
#define button1pin 2
#define button2pin 4
#define SERIAL_DEBUG true
#define DROPPING_CONNECTOR 254
#define ALERT 255
#define NUM_CONN 3
SoftwareSerial* bus[NUM_CONN];
int RX[NUM_CONN] =... | Add initial distance to source | Add initial distance to source
| Arduino | mit | knopjesmuseum/resilient-network,knopjesmuseum/resilient-network |
4d21cb8a20a18e9f58d8c850e1d3160cc646e877 | HBridgePWM/Sabertooth/Sabertooth.ino | HBridgePWM/Sabertooth/Sabertooth.ino |
// Copyright (c) 2013 Nautilabs. All rights reserved.
// http://code.google.com/p/robokite/source/checkout
// This file used SoftwareSerial example (Copyright (c) 2012 Dimension Engineering LLC) for Sabertooth http://www.dimensionengineering.com/software/SabertoothSimplifiedArduinoLibrary/html/index.html
// See licen... |
// Copyright (c) 2013 Nautilabs. All rights reserved.
// http://code.google.com/p/robokite/source/checkout
// This file used SoftwareSerial example (Copyright (c) 2012 Dimension Engineering LLC) for Sabertooth http://www.dimensionengineering.com/software/SabertoothSimplifiedArduinoLibrary/html/index.html
// See licen... | Change timing not have blocking write Use NMEA message with checksum | Change timing not have blocking write
Use NMEA message with checksum
| Arduino | mit | baptistelabat/robokite,baptistelabat/robokite,baptistelabat/robokite,baptistelabat/robokite,baptistelabat/robokite,baptistelabat/robokite,baptistelabat/robokite,baptistelabat/robokite |
8a3d87c80e146eaa81297aeb252887163ddc5f1f | software/firmware/animTest/animTest.ino | software/firmware/animTest/animTest.ino | #include <Wire.h>
#include <Adafruit_PWMServoDriver.h>
#include <SimpleBezier.h>
#include <ServoAnimatorI2C.h>
#include <EEPROM.h>
#include <QuadruloopEEPROM.h>
#include <CommandQueue.h>
#include "Config.h"
#include "Animations.h"
ServoAnimatorI2C anim(NUM_JOINTS);
CommandQueue cmdQ(COMMAND_QUEUE_LENGTH);
uint8_t mod... | #include <Wire.h>
#include <Adafruit_PWMServoDriver.h>
#include <SimpleBezier.h>
#include <ServoAnimatorI2C.h>
#include <EEPROM.h>
#include <QuadruloopEEPROM.h>
#include <CommandQueue.h>
#include "Config.h"
#include "Animations.h"
ServoAnimatorI2C anim(NUM_JOINTS);
CommandQueue cmdQ(COMMAND_QUEUE_LENGTH);
uint8_t mod... | switch to interactive animation with no params to POS | switch to interactive animation with no params to POS
useful for testing
| Arduino | mit | snhack/Quadruloop,snhack/Quadruloop,snhack/Quadruloop,snhack/Quadruloop,snhack/Quadruloop |
b596210b7333bd91b9bb5327efe7cc36775bb2a4 | DroidMain/DroidMain.ino | DroidMain/DroidMain.ino | // IOT RalliDroid
// Copyright Jukka Raivio and Jussi Salonen 2016
// MIT License
//
// Example code is based on Arduino Mega2560
//
/* Temperature & Humidity sensor DHT11 lib & setup
* Adafruit version, https://github.com/adafruit/DHT-sensor-library
*/
#include "DHT.h"
#define DHTPIN 2 // 2 digital pi... | // IOT RalliDroid
// Copyright Jukka Raivio and Jussi Salonen 2016
// MIT License
//
// Example code is based on Arduino Mega2560
//
// Debugging mode, results is serial monitor (true = on, false = off)
boolean debugging = true;
/* Temperature & Humidity sensor DHT11 lib & setup
* Adafruit version, https://github... | Update DroidMain.ino | Update DroidMain.ino
Debugging flag created | Arduino | mit | TampereTC/IOT-Rally-2016-MQTT,TampereTC/IOT-Rally-2016-MQTT |
fbdb0edcc4befe4a7417c9bef3620d50f35eb13c | arduino/walt/walt.ino | arduino/walt/walt.ino | /*
* Copyright (C) 2015 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by app... | /*
* Copyright (C) 2015 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by app... | Switch from digital to analog read for screen photodiode | Switch from digital to analog read for screen photodiode
With the amplified photodiode for screen. The amplification was selected to
never reach saturation but this also means values below digital 1 for even the
brightest screens. Switched to watching the photodiode reading via analogRead.
We also need to add a way t... | Arduino | apache-2.0 | google/walt,google/walt,google/walt,google/walt |
d25c5c51cf3597565f132dc2375fae8c9db51f47 | examples/MasterCaution/MasterCaution.ino | examples/MasterCaution/MasterCaution.ino | /* use '#define DCSBIOS_DEFAULT_SERIAL' instead if your Arduino board
* does not feature an ATMega328 or ATMega2650 controller.
*/
#define DCSBIOS_IRQ_SERIAL
#include "DcsBios.h"
DcsBios::Switch2Pos lampTestBtn("LAMP_TEST_BTN", 10);
DcsBios::LED nmspIlsLed(0x1112, 0x0020, 13);
void setup() {
DcsBios::setup();
}
... | /* use '#define DCSBIOS_DEFAULT_SERIAL' instead if your Arduino board
* does not feature an ATMega328 or ATMega2650 controller.
*/
#define DCSBIOS_IRQ_SERIAL
#include "DcsBios.h"
/* Declare a Master Caution Reset button on pin 10 */
DcsBios::Switch2Pos masterCautionBtn("UFC_MASTER_CAUTION", 10);
/* Make the LED con... | fix MasterCaution sketch | fix MasterCaution sketch
| Arduino | mit | dcs-bios/dcs-bios-arduino-library |
6f175f0be8827a7422b77f3721f25f653f070d5f | examples/Advanced/Serial/Serial.ino | examples/Advanced/Serial/Serial.ino | /*
*******************************************************************************
* Copyright (c) 2021 by M5Stack
* Equipped with M5Core sample source code
* 配套 M5Core 示例源代码
* Visit the website for more information：https://docs.m5stack.com/en/core/gray
* 获取更多资料请访问：https://doc... | #include <M5Stack.h>
void setup() {
M5.begin();
M5.Power.begin();
Serial.begin(115200);
// Serial2.begin(unsigned long baud, uint32_t config, int8_t rxPin, int8_t txPin, bool invert)
Serial2.begin(115200, SERIAL_8N1, 16, 17);
pinMode(5, OUTPUT);
digitalWrite(5, 1);
}
void loop() {
if(Serial.availab... | add some Ex&explain | add some Ex&explain
| Arduino | mit | m5stack/M5Stack,m5stack/M5Stack,m5stack/M5Stack |
2f0bb869a2f2b54db45b4d4a4e0afbf17bc58121 | firmware/examples/SimpleExample.ino | firmware/examples/SimpleExample.ino | /*
DailyTimer.h Library
BulldogLowell@gmail.com
April, 2016
** Library provides tools to set daily timers for control of devices such as lamps, appliances, etc. Developed primarilary for houshold presence simulation.
** Allows for setting ON and OFF times, days of the week (i.e. weekends, weekdays, Fridays) and the use... | /*
DailyTimer.h Library
BulldogLowell@gmail.com
April, 2016
** Library provides tools to set daily timers for control of devices such as lamps, appliances, etc. Developed primarilary for houshold presence simulation.
** Allows for setting ON and OFF times, days of the week (i.e. weekends, weekdays, Fridays) and the use... | Update SimpleExample.ino | Update SimpleExample.ino | Arduino | mit | BulldogLowell/DailyTimerSpark |
185f148e96de67600a98d70b3943078a0fcf6408 | stairs/main.ino | stairs/main.ino | // Use the FastLED library.
#include <FastLED.h>
// Serial DEBUG mode on/off
#undef DEBUG_POTS
// Analog input pins.
//
// .-------.
// | O O |
// | O O O |
// '-------'
//
// The device has five potentiometer inputs. The top left is a switch with 10
// different values, while the other four have a variable input b... | // Use the FastLED library.
#include <FastLED.h>
// Serial DEBUG mode on/off
#undef DEBUG_POTS
// Analog input pins.
//
// .-------.
// | O O |
// | O O O |
// '-------'
//
// The device has five potentiometer inputs. The top left is a switch with 10
// different values, while the other four have a variable input b... | add sine wave and ease in-out animations | stairs: add sine wave and ease in-out animations
| Arduino | mit | ambientsound/wirelight,ambientsound/wirelight,ambientsound/wirelight,ambientsound/wirelight,ambientsound/wirelight |
bb57020cf793f69e28aee9375847fb95417d0328 | Sniff_Arduino_Terminal/Sniff_to_arduino_serial/Sniff_to_arduino_serial.ino | Sniff_Arduino_Terminal/Sniff_to_arduino_serial/Sniff_to_arduino_serial.ino |
#include <SPI.h>
#include "mcp_can.h"
MCP_CAN CAN(9);
void setup(){
Serial.begin(115200);
START_INIT:
if(CAN_OK != CAN.begin(CAN_500KBPS)){
Serial.println("Failed to initialize CAN");
Serial.println("Retrying..");
delay(100);
goto START_INIT;
}
Serial.println("Starti... |
#include <SPI.h>
#include "mcp_can.h"
MCP_CAN CAN(9);
void setup(){
Serial.begin(115200);
START_INIT:
if(CAN_OK != CAN.begin(CAN_500KBPS)){
delay(100);
goto START_INIT;
}
//Set filter masks
CAN.init_Mask(0, 0, 0xfff);
CAN.init_Mask(1, 0, 0xfff);
//Set filters
// Loo... | Add timestamp of time since sketch start. | Add timestamp of time since sketch start.
| Arduino | mit | 4G-Gregg/BMW-GS-CAN-Sniffer,4G-Gregg/BMW-GS-CAN-Sniffer,4G-Gregg/BMW-GS-CAN-Sniffer |
243dd0aa245279dfc1aa8803930defb7825723e6 | moros/moros.ino | moros/moros.ino | /*
* TODO:
* case
* flag - P0 BLOCKER S0
* -- have graphical representation of flag
* wiring diagram - P2 S3
* reset button (chronos style?) - P1
* time setting - P1
* OLEDs
*
*/
#include <SPI.h>
#include <TFT.h>
#include "printf.h"
#define NONE -1
#define DISPLAY_FONT_SIZE 7
#define CHAR_HEIGHT_PX DISPLAY_FONT_SI... | /*
* TODO:
* case
* flag - P0 BLOCKER S0
* -- have graphical representation of flag
* wiring diagram - P2 S3
* reset button (chronos style?) - P1
* time setting - P1
* OLEDs
*
*/
#include <SPI.h>
#include <TFT.h>
#include "printf.h"
#define NONE -1
#define DISPLAY_FONT_SIZE 7
#define CHAR_HEIGHT_PX DISPLAY_FONT_SI... | Move display logic into Screen | Move display logic into Screen
| Arduino | mit | adamf/Moros,adamf/Moros,adamf/Moros,adamf/Moros |
32559feeb9e6c4544d68c9b4f67b293778901835 | examples/fingerprint/fingerprint.ino | examples/fingerprint/fingerprint.ino | /***************************************************
This is an example sketch for our optical Fingerprint sensor
Designed specifically to work with the Adafruit BMP085 Breakout
----> http://www.adafruit.com/products/751
These displays use TTL Serial to communicate, 2 pins are required to
interface
Ada... | /***************************************************
This is an example sketch for our optical Fingerprint sensor
Designed specifically to work with the Adafruit BMP085 Breakout
----> http://www.adafruit.com/products/751
These displays use TTL Serial to communicate, 2 pins are required to
interface
Ada... | Add delay to loop | Add delay to loop
Report on forums that running the loop without a delay causes sensor to malfunction.
http://forums.adafruit.com/viewtopic.php?f=19&t=62300&p=315863#p315548 | Arduino | bsd-3-clause | ekapujiw2002/Adafruit-Fingerprint-Sensor-Library,urandu/Adafruit-Fingerprint-Sensor-Library |
1a927343eb9785621cf2c8b0f2648de0a3dcb633 | examples/gpioWrite/gpioWrite.ino | examples/gpioWrite/gpioWrite.ino | // demo: Use RX0BF and RX1BF as digital outputs
// adlerweb, 2017-06-24
#include <SPI.h>
#include "mcp_can.h"
/*SAMD core*/
#ifdef ARDUINO_SAMD_VARIANT_COMPLIANCE
#define SERIAL SerialUSB
#else
#define SERIAL Serial
#endif
#define SPI_CS_PIN 10
MCP_CAN CAN(SPI_CS_PIN); // Set CS pin
void setup() {
SERI... | // demo: Use RX0BF and RX1BF as digital outputs
// adlerweb, 2017-06-24
#include <SPI.h>
#include "mcp2515_can.h"
#include "mcp2518fd_can.h"
/*SAMD core*/
#ifdef ARDUINO_SAMD_VARIANT_COMPLIANCE
#define SERIAL SerialUSB
#else
#define SERIAL Serial
#endif
#define CAN_2518FD
#define SPI_CS_PIN BCM8
#ifdef CAN_2... | Complete canbus gpio write example | Complete canbus gpio write example
| Arduino | mit | Seeed-Studio/CAN_BUS_Shield,Seeed-Studio/CAN_BUS_Shield |
84bed40a4a9a48a94ccdcaf71e6b0170d207cb40 | dragino/dragino_lcd20x4.ino | dragino/dragino_lcd20x4.ino | #include <Process.h>
#include "MQTTclient.h"
#include "DHT.h"
#include <OneWire.h> //Se importan las librerías
#include <DallasTemperature.h>
#include <LiquidCrystal.h>
#define ONE_WIRE_BUS_PIN A1
float tempC2 = 0;
float tempC3 = 0;
OneWire oneWire(ONE_WIRE_BUS_PIN);
DallasTemperature sensors(&oneWire);
DeviceAddre... | #Este sketch adquiere datos de temperatura y humedad desde un sensor DHT22 o DHT11 por el pin A0 y datos de
#temperatura desde un sensor DS18B20 conectado al pin A1 de un Dragino V2 MS14-S con M32 IoT Module
#estos datos son publicados a un broker MQTT al topico test/temp
#el display LCD 20*4 Characters - White back ut... | Update dragino_lcd20x4.ino | Update dragino_lcd20x4.ino | Arduino | mit | pumanzor/iot-redlibre,pumanzor/iot-redlibre |
f6a2d798ae2ff6e8394e9a8136b00b08e7114553 | src/squares/squares.ino | src/squares/squares.ino | #include "FastLED.h"
#define NUM_LEDS 64
#define PIN 6
#define FRAME_PERIOD_MILLIS 200
CRGB leds[NUM_LEDS];
int hue = 0;
int sat = 255;
int val = 60;
// pixel indices of various sized squares
int p1[] = { 4, 27, 28, 35, 36 };
int p2[] = { 12, 18, 19, 20, 21, 26, 29, 34, 37, 42, 43, 44, 45 };
int p3[] = { 20, 9, 10, ... | #include "FastLED.h"
#define NUM_LEDS 64
#define PIN 6
#define FRAME_PERIOD_MILLIS 400
CRGB leds[NUM_LEDS];
int hue = 0;
int sat = 255;
int val = 60;
int vv = 90;
// pixel indices of various sized squares
int p1[] = { 4, 27, 28, 35, 36 };
int p2[] = { 12, 18, 19, 20, 21, 26, 29, 34, 37, 42, 43, 44, 45 };
int p3[] = ... | Create a class for describing and drawing the animated squares. | Refactor: Create a class for describing and drawing the animated squares.
| Arduino | mit | fweiss/badge,fweiss/badge |
34da1015395b85590d79120daec08dc821886d33 | ArduinoSensorBoard/ArduinoSensorBoard.ino | ArduinoSensorBoard/ArduinoSensorBoard.ino | #include <SPI.h>
#include "nRF24L01.h"
#include "RF24.h"
RF24 radio(9,10);
const uint64_t pipes[2] = { 0xF0F0F0F001LL, 0xF0F0F0F002LL };
const byte shortAddr = 0x02;
int led = 13;
byte lampStatus = 0;
byte switchStatus = 0;
void setup(void)
{
Serial.begin(57600);
radio.begin();
radio.setAutoAck(false);
radi... | #include <SPI.h>
#include "nRF24L01.h"
#include "RF24.h"
//#include "printf.h"
RF24 radio(9,10);
const uint64_t pipes[2] = { 0xF0F0F0F001LL, 0xF0F0F0F002LL };
const byte shortAddr = 0x02;
int led = 13;
byte lampStatus = 0;
byte switchStatus = 0;
void setup(void)
{
Serial.begin(57600);
radio.begin();
radio.set... | Move to decimal | Move to decimal
| Arduino | apache-2.0 | Ertinfagor/RCHome,Ertinfagor/RCHome,Ertinfagor/RCHome |
f6d019f873a43303fd2deb8be82ed5185d54fb8c | MID/MID.ino | MID/MID.ino | /*
---------------------------------------------------
Arduino MID
Author: Angel Zaprianov <me@fire1.eu>
Start Date: 09.06.2016
For the full copyright and license information, please view the LICENSE
file that was distributed with this source code.
---------------------------------------------... | /*
---------------------------------------------------
Arduino MID
Author: Angel Zaprianov <me@fire1.eu>
Start Date: 09.06.2016
For the full copyright and license information, please view the LICENSE
file that was distributed with this source code.
---------------------------------------------... | Debug improved | Debug improved
| Arduino | mit | fire1/ArduinoMid,fire1/ArduinoMid |
1d5057981dda11fbeb2123d4eeac4f266aecbb6a | A2DP_Test/A2DP_Test.ino | A2DP_Test/A2DP_Test.ino |
#include <SPI.h>
#include <SD.h>
#include <Adafruit_VS1053.h>
extern "C" {
#include "nvs.h"
#include "nvs_flash.h"
#include "esp_log.h"
#include "bt.h"
#include "bt_app_core.h"
#include "bt_app_av.h"
#include "esp_bt_main.h"
#include "esp_bt_device.h"
#include "esp_gap_bt_api.h"
#include "esp_a2dp_api.h"
#include "es... |
#include <SPI.h>
#include <SD.h>
#include <Adafruit_VS1053.h>
extern "C" {
#include "nvs.h"
#include "nvs_flash.h"
#include "esp_log.h"
#include "bt.h"
#include "bt_app_core.h"
#include "bt_app_av.h"
#include "esp_bt_main.h"
#include "esp_bt_device.h"
#include "esp_gap_bt_api.h"
#include "esp_a2dp_api.h"
#include "es... | Enable registers 0xC017&0xC019 | Enable registers 0xC017&0xC019
| Arduino | mit | dogieBert/techfest17,dogieBert/techfest17 |
782205ba6adec90e66207753ec9df9c57eae3074 | TinkerTie.ino | TinkerTie.ino | /*
* File name: TinkerTie.ino
* Author: Tyler Makaro
* How to use:
* modify the animations.h file to make the desired animations.
* License:
* May be modified, and reused freely. Attribution is requested. I'd also love to hear about your animations on twitter @tmakaro
*/
#include <Adafruit_NeoPixel.h>
#includ... | /*
* File name: TinkerTie.ino
* Author: Tyler Makaro
* How to use:
* modify the animations.h file to make the desired animations.
* License:
* May be modified, and reused freely. Attribution is requested. I'd also love to hear about your animations on twitter @tmakaro
*/
#include <Adafruit_NeoPixel.h>... | Update TinkerTie.ino | Update TinkerTie.ino
Removed the dual functionally of the capacitive sensor due to the long press being highly unreliable. Added code for a second button that will be installed later. | Arduino | mit | t-makaro/TinkerTie |
a04629b263107d2e2ae518020e5444a4326f91b6 | Pathfinding_arduino.ino | Pathfinding_arduino.ino | //look at pathfinding in the repo for comments and explanation for a* algo. Here is where i explain obstacle tracking
#include <StandardCplusplus.h>
#include <system_configuration.h>
#include <unwind-cxx.h>
#include <utility.h>
#include <vector>
//#include <Math.h>
#include <iostream>
using namespace std;
... | //look at pathfinding in the repo for comments and explanation for a* algo. Here is where i explain obstacle tracking
#include <StandardCplusplus.h>
#include <system_configuration.h>
#include <unwind-cxx.h>
#include <utility.h>
#include <vector>
//#include <Math.h>
#include <iostream>
using namespace std;
... | Update Pathfinding_arduino.ino | Update Pathfinding_arduino.ino
added comments to explain live obstacle and path finding | Arduino | mit | Z3-Engineering/Navigation-and-Pathfinding-Codes |
41c08cc6a9c673270597259884a0ce11d262a19b | cmdVsens/src/sketch.ino | cmdVsens/src/sketch.ino | /*
cmdVsens sketch
Waits for a request on the serialport.
Then measures the voltage on measurePin and prints the result to the serialport
*******
Do not connect more than 5 volts directly to an Arduino pin!!
*******
*/
// +V from battery is connected to analog pin 0
#define measurePin A0
#define activityL... | /*
cmdVsens sketch
Waits for a request on the serialport.
Then measures the voltage on measurePin and prints the result to the serialport
*******
Do not connect more than 5 volts directly to an Arduino pin!!
*******
*/
// +V from battery is connected to analog pin 0
#define measurePin A0
#define activityL... | remove shadow declare | remove shadow declare
| Arduino | mit | Mausy5043/arduino,Mausy5043/arduino,Mausy5043/arduino,Mausy5043/arduino |
71ceb0dab0600c1a116b72b17c38694a481fd54d | bsd/bsd.ino | bsd/bsd.ino | /**
A small project at the request of my friedn and colleague @ffeldmann
This is an arduino sketch that runs on the Arduino Yun.
This project shows a webpage where people can press the "BullShit" button which in turns will trigger an alarm and light some pixels
BSDetector is a microservice accessible as a ... | /**
A small project at the request of my friedn and colleague @ffeldmann
This is an arduino sketch that runs on the Arduino Yun.
This project shows a webpage where people can press the "BullShit" button which in turns will trigger an alarm and light some pixels
BSDetector is a microservice accessible as a ... | Fix issue with IP address string | Fix issue with IP address string
| Arduino | mit | bgeorges/tinkering,bgeorges/tinkering,bgeorges/tinkering |
fe04d3e357008d19686f67404815d1f0f263cccf | examples/UnitTest/UnitTest.ino | examples/UnitTest/UnitTest.ino | /*
* This is not an example sketch, it is used to validate code changes
* and determine maximum workable RPM/microsteps parameters for a given board.
*
* Usage: run with serial terminal open
*
* All driver tests are done with microstep 1. Increasing microstep halves max rpm with each level.
* The maximum usab... | /*
* This is not an example sketch, it is used to validate code changes
* and determine maximum workable RPM/microsteps parameters for a given board.
*
* Usage: run with serial terminal open
*
* All driver tests are done with microstep 1. Increasing microstep halves max rpm with each level.
* The maximum usab... | Fix compile warnings | Fix compile warnings
| Arduino | mit | laurb9/StepperDriver |
b1a2db788c6e3b1ef5463fdab215ee2f8164a6b1 | src/Full_decoder.ino | src/Full_decoder.ino | /*
If serial output is desired uncommment the #undef line. For production, i.e.
without computer connected this line should be commented out.
*/
#define DEBUG_OUTPUT
//#undef DEBUG_OUTPUT
#ifdef DEBUG_OUTPUT
#define USE_SERIAL
#define DEBUG(x) Serial.print(x)
#define DEBUGLN(x) Serial.println(x)
#else
#define DEBUG(x... | /*
If serial output is desired uncommment the #undef line. For production, i.e.
without computer connected this line should be commented out.
*/
#define DEBUG_OUTPUT
//#undef DEBUG_OUTPUT
#ifdef DEBUG_OUTPUT
#define USE_SERIAL
#define DEBUG(x) Serial.print(x)
#define DEBUGLN(x) Serial.println(x)
#else
#define DEBUG(x... | Debug statements and a bit cleanup | Debug statements and a bit cleanup
| Arduino | mit | dirkjankrijnders/universal_decoder,dirkjankrijnders/universal_decoder |
c9747b61bf9f531afd01dba1a88812544effba4d | src/Gortobot_v3c.ino | src/Gortobot_v3c.ino | /* Gortobot v3c */
// TODO: battery classes, abstract, fake
// TODO: gps classes, abstract, fake
// TODO: figure out how to fail from one batt to the next
// TODO: integrate IridiumSBD 2.0 and test
// TODO: batteries need to wait till 3.4 to comer back on
// Program Modes (config)
#include "configs/config.h"
// Incl... | /* Gortobot v3c */
// TODO: battery classes, abstract, fake
// TODO: gps classes, abstract, fake
// TODO: figure out how to fail from one batt to the next
// TODO: integrate IridiumSBD 2.0 and test
// Program Modes (config)
#include "configs/config.h"
// Includes
#include <EEPROM.h> // for saving the runNum after ea... | Remove TODO comment | Remove TODO comment
| Arduino | mit | cgorton1313/gortobot,cgorton1313/gortobot |
84ffb9628a75bb18e329f771f28c66ab4c5e1b3c | NerfKeyboardRemapper.ino | NerfKeyboardRemapper.ino | #include <hidboot.h>
#include <usbhub.h>
#include <LiquidCrystal.h>
#define FORCE_SHIFT 0x100
#define FORCE_ALTGR 0x200
#define PURIFY 0xFF
#define LETTERS_START 0x04
#define LETTERS_END 0x1D
#define LETTERS_CNT 26
#define NUMBERS_START 0x1E
#define NUMBERS_END 0x27
#define NUMBERS_CNT 10
#define SPE_START 0x2D
#defin... | #include <hidboot.h>
#include <usbhub.h>
#include <LiquidCrystal.h>
#define FORCE_SHIFT 0x100
#define FORCE_ALTGR 0x200
#define PURIFY 0xFF
#define LETTERS_START 0x04
#define LETTERS_END 0x1D
#define LETTERS_CNT 26
#define NUMBERS_START 0x1E
#define NUMBERS_END 0x27
#define NUMBERS_CNT 10
#define SPE_START 0x2D
#defin... | Fix for multiple key stroke | Fix for multiple key stroke
| Arduino | mit | NoobLad/NerfKeyboardRemapper |
13330fc5a894d03b93e3027eef8ef72d4e5cb194 | barf_esp8266.ino | barf_esp8266.ino | /* This sketch implements a user-friendly though slightly ridiculous serial-wifi bridge for an ESP8266 chip.
Upload this sketch to an ESP8266, connect the RX and TX pins to (software or hardware) pins of an arduino
and use the barf library on arduino for super-easy bidirectional sending of statuses and commands ove... | /* This sketch implements a user-friendly though slightly ridiculous serial-wifi bridge for an ESP8266 chip.
Upload this sketch to an ESP8266, connect the RX and TX pins to (software or hardware) pins of an arduino
and use the barf library on arduino for super-easy bidirectional sending of statuses and commands ove... | Make sure to never send \r\n as a linebreak | Make sure to never send \r\n as a linebreak
| Arduino | mit | kirberich/barf_esp8266,kirberich/barf_esp8266 |
98594677d3ed5997e16de1bf64cdab0a7ac97773 | ardesp/joinme/joinme.ino | ardesp/joinme/joinme.ino | /*
* joinme.ino --
* a port of the Lua Joinme wifi config utility to Arduino ESP IDE
*/
/*
#include <ESP8266WiFi.h>
#include <DNSServer.h>
#include <ESP8266WebServer.h>
// TODO
// wifi config form
// sensor data report, and actuator set form
// fix the DNS server, http://www.esp8266.com/viewtopic.php?p=21169
cons... | /*
* joinme.ino --
* a port of the Lua Joinme wifi config utility to Arduino ESP IDE
*/
/*
#include <ESP8266WiFi.h>
#include <DNSServer.h>
#include <ESP8266WebServer.h>
// TODO
// wifi config form
// sensor data report, and actuator set form
// fix the DNS server, http://www.esp8266.com/viewtopic.php?p=21169
cons... | clear implemented | clear implemented
| Arduino | agpl-3.0 | hamishcunningham/fishy-wifi,hamishcunningham/fishy-wifi,hamishcunningham/fishy-wifi,hamishcunningham/fishy-wifi,hamishcunningham/fishy-wifi,hamishcunningham/fishy-wifi |
658df600fdc106bd64cbc5ba62c19bf52de01486 | NRF52832/Unicorn_Hat_HD/Wrench-Mask-BLE_Unicorn-Hat-HD.ino | NRF52832/Unicorn_Hat_HD/Wrench-Mask-BLE_Unicorn-Hat-HD.ino | /* Wrench Mask - BLE Version (NRF52832)
*
* Hardware Used:
* Adafruit Feather NRF52
* Pimoroni Unicorn Hat HD x2
*
* by Brandon C. Allen
*
* BLE Functions based on the bleuart example from AdaFruit:
* https://github.com/adafruit/Adafruit_nRF52_Arduino/blob/master/libraries/Bluefruit52Lib/examples... | /* Wrench Mask - BLE Version (NRF52832)
*
* Hardware Used:
* Adafruit Feather NRF52
* Pimoroni Unicorn Hat HD x2
*
* by Brandon C. Allen
*
* BLE Functions based on the bleuart example from AdaFruit:
* https://github.com/adafruit/Adafruit_nRF52_Arduino/blob/master/libraries/Bluefruit52Lib/examples... | Update Wrench-Mask-BLE_Unicorn-Hat-HD.ino | Update Wrench-Mask-BLE_Unicorn-Hat-HD.ino | Arduino | mit | Arudinne/RGB-Wrench-Mask |
284adf89eb10ce6468f208d52fbbd86aa45a517c | examples/drawLines/drawLines.ino | examples/drawLines/drawLines.ino | // Draw Lines - Demonstrate drawRectangle and fillRectangle
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
// version 2.1 of the License, or (at your option) any later vers... | // Draw Lines - Demonstrate drawRectangle and fillRectangle
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
// version 2.1 of the License, or (at your option) any later vers... | Update drawLines.ino | Update drawLines.ino | Arduino | mit | jediguy13/TFT_Touch_Shield_V1,jediguy13/TFT_Touch_Shield_V1 |
46091f71fc3e99aa8f80c77999a2b0343f1acb8e | particle/evcharging.ino | particle/evcharging.ino | // ----------------------------------------------------------
// Firmware for Particle Electron connected to EV charger
// ----------------------------------------------------------
void setup() {
// Declare a Particle.function to trigger new charging session request
Particle.function("new-session", newSession... | // ----------------------------------------------------------
// Firmware for Particle Electron connected to EV charger
// ----------------------------------------------------------
void setup() {
Serial.begin(9600); // open serial over USB
// Declare a Particle.function to trigger new client instance reque... | update particle firmware code | update particle firmware code
| Arduino | mit | anamklone/ENGR1050,anamklone/ENGR1050,anamklone/ENGR1050 |
9d1bd6e76cb424ab4b12695925b21348b292bf74 | things/examples/arduino/WaterSensor/WaterSensor.ino | things/examples/arduino/WaterSensor/WaterSensor.ino | #include <Dhcp.h>
#include <Dns.h>
#include <Ethernet.h>
#include <EthernetClient.h>
#include <EthernetServer.h>
#include <EthernetUdp.h>
#include <util.h>
#include <SPI.h>
int requestID = 1;
unsigned long lastCallbackTime = 0;// the last time the data was written
// The MAC address of your Ethernet board (or Ethern... | #include <Dhcp.h>
#include <Dns.h>
#include <Ethernet.h>
#include <EthernetClient.h>
#include <EthernetServer.h>
#include <EthernetUdp.h>
#include <util.h>
#include <SPI.h>
int requestID = 1;
unsigned long lastCallbackTime = 0;// the last time the data was written
// The MAC address of your Ethernet board (or Ethern... | change device type of water sensor | change device type of water sensor
| Arduino | mit | mwittig/steward,TheThingSystem/steward,mwittig/steward,mwittig/steward,TheThingSystem/steward,mwittig/steward,TheThingSystem/steward,estbeetoo/steward,TheThingSystem/steward,TheThingSystem/steward,mwittig/steward,TheThingSystem/steward,estbeetoo/steward,TheThingSystem/steward,mwittig/steward,mwittig/steward,estbeetoo/s... |
645b46a378f85d7061d339f002c7e715f8282020 | esp8266_160220_BYOP.ino | esp8266_160220_BYOP.ino |
/*
* This program is used for a message station shown at
* https://hackaday.io/project/9526-bring-your-own-pizero-byop
*/
/*
* v0.31 2016 Mar. 5
* - proc_get() takes 2000 msec wait to show the sender on LCD before the message
* v0.30 2016 Mar. 4
* - return [SenderName] in proc_get()
* + update proc_get(... |
/*
* This program is used for a message station shown at
* https://hackaday.io/project/9526-bring-your-own-pizero-byop
*/
/*
* v0.31 2016 Mar. 5
* - put wait after AQM0802_Clear() so that people can sense the refresh of the message
* + add delay(kWait_beforeShowLcdMessage_msec);
* + add [kWait_beforeSh... | put wait (300msec) after AQM0802_Clear() so that people can sense the refresh of the message | put wait (300msec) after AQM0802_Clear() so that people can sense the refresh of the message
| Arduino | mit | yasokada/esp8266_160220_BYOP |
45acaaae48fcce48ef7dfbe5e0ef54d7676515f8 | ESP8266-code/WiFiconfig.ino | ESP8266-code/WiFiconfig.ino | /*
* When config button is pressed start accesspoint and interact with user to provide the
* required access point credentials and other parameters
* Connect to the required access point and stop the server
*
* In normal mode, collect data and send to the data store
*
*
* configuration needs to set the conf... | /*
* on bootup attempt to read configuration from SPIFFS and connect
*
* When config button is pressed start accesspoint and interact with user to provide the
* required access point credentials and other parameters
* save configuration to SPIFFS
* Connect to the required access point and stop the server
*
... | Store configuration in SPIFFS | Store configuration in SPIFFS | Arduino | mit | KitWallace/CitizenSense |
aef6d2195f9ca3b91cfd8000dc761130edda2ca6 | examples/Widgets/Table/Table_Simple/Table_Simple.ino | examples/Widgets/Table/Table_Simple/Table_Simple.ino | /**************************************************************
* Blynk is a platform with iOS and Android apps to control
* Arduino, Raspberry Pi and the likes over the Internet.
* You can easily build graphic interfaces for all your
* projects by simply dragging and dropping widgets.
*
* Downloads, docs, tuto... | /**************************************************************
* Blynk is a platform with iOS and Android apps to control
* Arduino, Raspberry Pi and the likes over the Internet.
* You can easily build graphic interfaces for all your
* projects by simply dragging and dropping widgets.
*
* Downloads, docs, tuto... | Format examples | Format examples
| Arduino | mit | blynkkk/blynk-library,ivankravets/blynk-library,ivankravets/blynk-library,ivankravets/blynk-library,blynkkk/blynk-library,blynkkk/blynk-library,ivankravets/blynk-library,ivankravets/blynk-library,blynkkk/blynk-library,blynkkk/blynk-library |
5546bffbc250a47c016ea6daafd1552d2c204d0c | KomaRoof.ino | KomaRoof.ino | /*
* Copyright (c) 2016 Jari Saukkonen
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publ... | /*
* Copyright (c) 2016 Jari Saukkonen
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publ... | Fix pin numbering, remove unused pin kludge and temperature formatting in finnish weather | Fix pin numbering, remove unused pin kludge and temperature formatting in finnish weather
| Arduino | mit | vehnae/komaroof,vehnae/komaroof |
88a88e38c97649b705a7a7507dad5b0c2af40a4c | week4-iot_servos/weather_servos_three.ino | week4-iot_servos/weather_servos_three.ino | /**************
Weather Servos 1.0
Nadine Lessio
June 2017
Feather pulls and parses JSON data from Weather Underground.
Servos respond to wind speed. Like a weather vein.
https://github.com/bblanchon/ArduinoJson
https://gist.github.com/bbx10/149bba466b1e2cd887bf
******************/
#include <ESP8266WiFi.h>
#includ... | /**************
Weather Servos 1.0
Nadine Lessio
June 2017
Feather pulls and parses JSON data from Weather Underground.
Servos respond to wind speed. Like a weather vein.
https://github.com/bblanchon/ArduinoJson
https://gist.github.com/bbx10/149bba466b1e2cd887bf
https://github.com/brendanmatkin/BlindSpot/tree/maste... | add example credit | add example credit
| Arduino | mit | sharkwheels/Independet_study_2017,sharkwheels/Independet_study_2017,sharkwheels/Independet_study_2017 |
c697c095374c03b244664410383c972c31007bf0 | reference/leow/Final_arduino_2/Final_arduino_2.ino | reference/leow/Final_arduino_2/Final_arduino_2.ino | //for collecting GPS data and transfering longtitude and lattitude to thingspeak
//arduino 2
#include <TinyGPS++.h>
#include <SoftwareSerial.h>
#include <ThingSpeak.h>
#define USE_WIFI101_SHIELD
#include <SPI.h>
#include <WiFi.h>
char ssid[] = "melvin"; // your network SSID (name)
char pass[] = "29052012"; ... | //for collecting GPS data and transfering longtitude and lattitude to thingspeak
//arduino 2
#include <TinyGPS++.h>
#include <SoftwareSerial.h>
#include <ThingSpeak.h>
#define USE_WIFI101_SHIELD
#include <SPI.h>
#include <WiFi.h>
char ssid[] = "*******"; // your network SSID (name)
char pass[] = "*******"; // yo... | remove api keys | remove api keys
| Arduino | mit | superoo7/solar_boat,superoo7/solar_boat |
9286fcf7d4a09ed8eaad9503e43622666a22f588 | code/magnetometer.ino | code/magnetometer.ino | #define HMC5883_ADDRESS 0x1E
#define MODE_ADDRESS 0x02
#define DEC_ANGLE 0.5 //in degrees
#define NUM_AXIS 3
#define XAXIS 0
#define YAXIS 1
#define ZAXIS 2
#define M1// to be filled after calibration
#define M2
#define M3
#define M4
#define M5
#define M6
#define M7
#define M8
#define M9
#define B1
#define B2
#defin... | #define HMC5883_ADDRESS 0x1E
#define MODE_ADDRESS 0x02
#define DEC_ANGLE 0.5 //in degrees
#define NUM_AXIS 3
#define XAXIS 0
#define YAXIS 1
#define ZAXIS 2
#define M1// to be filled after calibration
#define M2
#define M3
#define M4
#define M5
#define M6
#define M7
#define M8
#define M9
#define B1
#define B2
#defin... | Update magnetometer.ino | Update magnetometer.ino | Arduino | unlicense | IITK-SUMMER-QUAD-2015-TEAM/QuadIITK,IITK-SUMMER-QUAD-2015-TEAM/QuadIITK |
a4422574a97284df63d713d373d1a474fa51220f | Arduino/GroundUnit/GroundUnit.ino | Arduino/GroundUnit/GroundUnit.ino | // Copyright (c) 2013 Nautilabs
// https://github.com/baptistelabat/robokite
// This file used SoftwareSerial example (Copyright (c) 2012 Dimension Engineering LLC)
// for Sabertooth http://www.dimensionengineering.com/software/SabertoothSimplifiedArduinoLibrary/html/index.html
// See license.txt in the Sabertooth ard... | // Copyright (c) 2013 Nautilabs
// https://github.com/baptistelabat/robokite
// This file used SoftwareSerial example (Copyright (c) 2012 Dimension Engineering LLC)
// for Sabertooth http://www.dimensionengineering.com/software/SabertoothSimplifiedArduinoLibrary/html/index.html
// See license.txt in the Sabertooth ard... | Add gain tuning ability (back from old complete/src/src.ino) | Add gain tuning ability (back from old complete/src/src.ino)
| Arduino | mit | baptistelabat/robokite,baptistelabat/robokite,baptistelabat/robokite,baptistelabat/robokite,baptistelabat/robokite,baptistelabat/robokite,baptistelabat/robokite,baptistelabat/robokite |
7f20c2a7f495be1abca6c5ced5b45395684a7e49 | code/i2c_datatest.ino | code/i2c_datatest.ino | #include <Wire.h>
#define SENSOR_ADDR 0x68;
void setup(){
Wire.begin();
Wire.beginTransmission(SENSOR_ADDR);
Wire.write(0x6b); // POWER register
Wire.write(0x00); // dont sleep
Wire.endTransmission(true);
Serial.begin(9600);
}
void loop(){
// read DATA here
delay(30);
}
| #include <Wire.h>
#define SENSOR_ADDR 0x68;
void setup(){
Wire.begin();
Wire.beginTransmission(SENSOR_ADDR);
Wire.write(0x6b); // POWER register
Wire.write(0x00); // dont sleep
Wire.endTransmission(true);
Serial.begin(9600);
}
void loop(){
Wire.beginTransmission(MPU_addr);
Wire.write(0x3B... | Update i2c_datatest.ino | Update i2c_datatest.ino | Arduino | apache-2.0 | volodink/ishs-course |
bcd558f5015e8fe93a310462af67f91b226a14b8 | printer.ino | printer.ino | #include <SPI.h>
#include <Ethernet.h>
#include <SD.h>
#include <EEPROM.h>
#include <SoftwareSerial.h>
#include <Bounce.h>
// ------- Settings for YOU to change if you want ---------------------
byte mac[] = { 0x90, 0xA2, 0xDA, 0x00, 0x86, 0x67 }; // physical mac address
// The printerType controls the format of th... | #include <SPI.h>
#include <Ethernet.h>
#include <SD.h>
#include <EEPROM.h>
#include <SoftwareSerial.h>
#include <Bounce.h>
// ------- Settings for YOU to change if you want ---------------------
byte mac[] = { 0x90, 0xA2, 0xDA, 0x00, 0x86, 0x67 }; // physical mac address
// The printerType controls the format of th... | Reduce sketch size from 31138 to 29210 bytes. | Reduce sketch size from 31138 to 29210 bytes.
We don't need the duration, since it can be calculated manually if that's
important.
Since the `debug` macro was always called with a string, making it a function
reduces the number of distinct calls to `millis()` and the other functions
within it.
| Arduino | mit | exciting-io/printer,exciting-io/printer,exciting-io/printer,exciting-io/printer,exciting-io/printer |
727c78ffeb9d9cb08003a1449c1318a975f24c09 | printer.ino | printer.ino | #include <SPI.h>
#include <Ethernet.h>
#include <SD.h>
#include <EEPROM.h>
#include <SoftwareSerial.h>
#include <Bounce.h>
// -- Settings for YOU to change if you want
byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }; // physical mac address
// The printerType controls the format of the data sent from the server... | #include <SPI.h>
#include <Ethernet.h>
#include <SD.h>
#include <EEPROM.h>
#include <SoftwareSerial.h>
#include <Bounce.h>
// -- Settings for YOU to change if you want
byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }; // physical mac address
// The printerType controls the format of the data sent from the server... | Rename error function for consistency. | Rename error function for consistency.
| Arduino | mit | exciting-io/printer,exciting-io/printer,exciting-io/printer,exciting-io/printer,exciting-io/printer |
73a1e288c0c3ae63a1cd367919b2530fbec7b97a | mutually-assured-destruction.ino | mutually-assured-destruction.ino | // Arduino Libraries
#include <Arduino.h>
#include <EEPROM.h>
#include <Wire.h>
#include <Adafruit_MMA8451.h>
#include <Adafruit_Sensor.h>
#include <CmdMessenger.h>
/**
* Project Files
*/
#include "build.h" // Project settings such as pins or build flags
#include "Accelerometer.h"
#include "Relay.h"
#include "fire-... | // Arduino Libraries
#include <Arduino.h>
#include <EEPROM.h>
#include <Wire.h>
#include <Adafruit_MMA8451.h>
#include <Adafruit_Sensor.h>
#include <CmdMessenger.h>
/**
* Project Files
*/
#include "build.h" // Project settings such as pins or build flags
#include "Accelerometer.h"
#include "Relay.h"
#include "fire-... | Add booleans for which inputs are enabled | Add booleans for which inputs are enabled
| Arduino | mit | objectiveSee/mutually-assured-destruction,objectiveSee/mutually-assured-destruction,objectiveSee/mutually-assured-destruction,objectiveSee/mutually-assured-destruction |
64dc6a49dd178bfc6320c2c78a5559b01d716c43 | WeatherSensor_rev2/WeatherSensor_rev2.ino | WeatherSensor_rev2/WeatherSensor_rev2.ino | #include <avr/sleep.h>
#include <avr/power.h>
#include <avr/wdt.h>
#include <avr/io.h>
#include <avr/interrupt.h>
#include <Wire.h>
#include "Adafruit_Si7021.h"
#include "SparkFunMPL3115A2.h" //Pressure sensor - Search "SparkFun MPL3115" and install from Library Manager
#define WDTCR |= _BV(WDIE)
Adafruit_Si7021 sen... | #include <avr/sleep.h>
#include <avr/power.h>
#include <avr/wdt.h>
#include <avr/io.h>
#include <avr/interrupt.h>
#include <Wire.h>
#include "Adafruit_Si7021.h"
#include "SparkFunMPL3115A2.h" //Pressure sensor - Search "SparkFun MPL3115" and install from Library Manager
#define WDTCR |= _BV(WDIE)
Adafruit_Si7021 sen... | disable unused code | disable unused code
Signed-off-by: Robert Nelson <d6c41255011d14bfa93d8562b946ca186cfa0c7b@gmail.com>
| Arduino | mit | eewiki/ws_bm_rtc,eewiki/ws_bm_rtc,eewiki/WeatherStation,eewiki/ws_bm_rtc,eewiki/WeatherStation,eewiki/WeatherStation,eewiki/WeatherStation,eewiki/WeatherStation |
9479a33389ee2c8dc8733acb26ad0566ee959389 | arduino/balcony_garden/balcony_garden.ino | arduino/balcony_garden/balcony_garden.ino | // Author: Brian Scully
// Copyright (c) 2016 Agponics
#include <Arduino.h>
#include "cmd_protocol.h"
#include "base_device.h"
#include "analog_float_switch.h"
#include "relay_switch.h"
#include "dht22_sensor.h"
#include "ds18b20_sensor.h"
#define DELAY 500
#define START_PIN_FLOAT_SWTCH 0 // pin 0: analog float sw... | // Author: Brian Scully
// Copyright (c) 2016 Agponics
#include <Arduino.h>
#include "cmd_protocol.h"
#include "base_device.h"
#include "analog_float_switch.h"
#include "relay_switch.h"
#include "dht22_sensor.h" // DHT-22 temp/humidity sensor
#include "ds18b20_sensor.h" // one-wire temperature probe
#include "hcsr04... | Add HC-SR04 ultrasonic sensor to sketch | Add HC-SR04 ultrasonic sensor to sketch
| Arduino | artistic-2.0 | Agponics/balcony_garden_pi |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.