commit stringlengths 40 40 | old_file stringlengths 2 205 | new_file stringlengths 2 205 | old_contents stringlengths 0 32.9k | new_contents stringlengths 1 38.9k | subject stringlengths 3 9.4k | message stringlengths 6 9.84k | lang stringlengths 3 13 | license stringclasses 13
values | repos stringlengths 6 115k |
|---|---|---|---|---|---|---|---|---|---|
80419a14f098c88db9b5f6ff74f7ccfc0e1ecb60 | BinaryKeyboard.ino | BinaryKeyboard.ino | /*
Chris Johnston Apr 13 2017
Binary Keyboard for Arduino Pro Micro
*/
// libraries
#include <Keyboard.h>
#include <Wire.h>
#include <SPI.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
// pixel art for 1/0 mode w/ animations
#include "PixelArt.h"
// flag for reading/entering right to left or left to righ... | /*
Chris Johnston Apr 13 2017
Binary Keyboard for Arduino Pro Micro
*/
// libraries
#include <Keyboard.h>
#include <Wire.h>
#include <SPI.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
// pixel art for 1/0 mode w/ animations
#include "PixelArt.h"
// flag for reading/entering right to left or left to righ... | add ability to output control characters ASCII < 0x20 | add ability to output control characters ASCII < 0x20
| Arduino | mit | Chris-Johnston/BinaryKeyboard |
7b38303a5caa40ad883a0205d446d44708147c83 | Device/HC-SR04.ino | Device/HC-SR04.ino | //Reference Value to Get The Status of Parking
#define parked 150
//Pin Setting for the 3 Ultrasonic Sensors
#define trigPin 13
#define echoPin 12
#define trigPin2 4
#define echoPin2 5
#define trigPin3 8
#define echoPin3 9
//Flags
boolean d1 = 0;
boolean d2 = 0;
boolean d3 = 0;
/*
//Deducting the Low Pulse fromm the ... | //Reference Value to Get The Status of Parking
#define parked 200
#define fault 4000
//Pin Setting for the 3 Ultrasonic Sensors
#define trigPin 13
#define echoPin 12
#define trigPin2 4
#define echoPin2 5
#define trigPin3 8
#define echoPin3 9
//Flags
boolean d1 = 0;
boolean d2 = 0;
boolean d3 = 0;
/*
//Deducting the L... | Update HC-SR04.ino | Update HC-SR04.ino | Arduino | mit | shyampurk/pubnub-rpi-smart-parking,shyampurk/pubnub-rpi-smart-parking,shyampurk/pubnub-rpi-smart-parking,shyampurk/pubnub-rpi-smart-parking,shyampurk/pubnub-rpi-smart-parking |
13946ece8bd0fd5853ada9a5efb62a474b6f782e | code/feather_code.ino | code/feather_code.ino |
/*******************************************************************************
Copyright (c) 2015 Thomas Telkamp and Matthijs Kooijman
Permission is hereby granted, free of charge, to anyone
obtaining a copy of this document and accompanying files,
to do whatever they want with them without any restric... |
/*******************************************************************************
Copyright (c) 2015 Thomas Telkamp and Matthijs Kooijman
Permission is hereby granted, free of charge, to anyone
obtaining a copy of this document and accompanying files,
to do whatever they want with them without any restric... | Add files via upload | Add files via upload
code with corrected battery value | Arduino | mit | officialtiger/summerschool2017 |
52f7fda8edef397048c0a66db5a26ca8b0631aff | ESP8266/ESP8266.ino | ESP8266/ESP8266.ino | /******************************************************************************
The MIT License (MIT)
Copyright (c) 2015 Juergen Skrotzky alias Jorgen (JorgenVikingGod@gmail.com)
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (t... | /******************************************************************************
The MIT License (MIT)
Copyright (c) 2015 Juergen Skrotzky alias Jorgen (JorgenVikingGod@gmail.com)
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (t... | remove Serial.flush() | remove Serial.flush() | Arduino | mit | munichmakerlab/refrigerator-lights,munichmakerlab/refrigerator-lights,munichmakerlab/refrigerator-lights |
c9c785f6b1ef0f4aa35d0f880abf96043c4b6b79 | ksp-gegi/ksp-gegi.ino | ksp-gegi/ksp-gegi.ino |
#include <Arduino.h>
// diody LED: niebieskie (bez rezystora) do GND, białe (z rezystorem) do pinu
// potencjometr: niebieski z czarną kreską do GND, biały do +5V, niebieski do pinu A0
// przełączniki: niebieski do GND, biały do pinu, wszystkie zamontowane tak, aby niebieski był w środku, biały na dole, a niepodłączo... |
#include <Arduino.h>
// dł kabelków 15-20cm
// diody LED: niebieskie (bez rezystora, krótka nóżka) do GND, białe (z rezystorem, długa nóżka) do pinu
// potencjometr: niebieski z czarną kreską do GND, biały do +5V, niebieski do pinu A0
// przełączniki2: niebieski do GND, biały do pinu, wszystkie zamontowane tak, aby n... | clarify description | clarify description
| Arduino | mit | ytmytm/ksp-gegi |
c99fd9ae82acbfccba59c58a73341667f82a9f5d | MqttIRReceiver/MqttIRReceiver.ino | MqttIRReceiver/MqttIRReceiver.ino | // Copyright 2017 the project authors as listed in the AUTHORS file.
// All rights reserved. Use of this source code is governed by the
// license that can be found in the LICENSE file.
#include <ESP8266WiFi.h>
#include <PubSubClient.h>
#include "limits.h"
#include <string>
#include "WirelessConfig.h"
#define RX_IR_P... | // Copyright 2017 the project authors as listed in the AUTHORS file.
// All rights reserved. Use of this source code is governed by the
// license that can be found in the LICENSE file.
#include <ESP8266WiFi.h>
#include <PubSubClient.h>
#include "limits.h"
#include <string>
#include "WirelessConfig.h"
#define RX_IR_P... | remove redundant configuration entry | src: remove redundant configuration entry
| Arduino | mit | mhdawson/arduino-esp8266,mhdawson/arduino-esp8266 |
73c845e56c1253e70a1de27eff0bc811041810b9 | src/src.ino | src/src.ino | #include <SPI.h>
#include <avr/eeprom.h>
/* bluetooth dependencies */
#include <EEPROM.h>
#include <lib_aci.h>
#include "bluetooth.h"
#include "lcd.h"
#include "types.h"
#include "haversine.h"
#include "waypoint_reader.h"
#include "waypoint_writer.h"
#include "gps.h"
#define WAYPOINT_DISTANCE_THRESHOLD 100 /* Distan... | #include <SPI.h>
#include <avr/eeprom.h>
/* bluetooth dependencies */
#include <EEPROM.h>
#include <lib_aci.h>
#include "bluetooth.h"
#include "lcd.h"
#include "types.h"
#include "haversine.h"
#include "waypoint_reader.h"
#include "waypoint_writer.h"
#include "gps.h"
#define WAYPOINT_DISTANCE_THRESHOLD 100 /* Distan... | Add note | Add note
| Arduino | mit | sebluy/gps-tracker-arduino,sebluy/gps-tracker-arduino,sebluy/gps-watch,sebluy/gps-watch |
7ab3e3e6bb9750f817fab72945fdea38c9e67855 | Examples/Relay/Relay.ino | Examples/Relay/Relay.ino | /*
* This example may switch a Light ON after Sunset and turn it OFF before Sunrise
*/
#include <ESP8266WiFi.h>
#include <PubSubClient.h>
#include <ESP8266httpUpdate.h>
#include <ESP8266HTTPClient.h>
#include <ArduinoJson.h>
#include <FS.h>
#include <ESPMetRED.h>
const char* MQTT_PUBLISH_TOPIC = "ESPM... | /*
* This example may switch a Light ON after Sunset and turn it OFF before Sunrise
*/
#include <ESP8266WiFi.h>
#include <PubSubClient.h>
#include <ESP8266httpUpdate.h>
#include <ESP8266HTTPClient.h>
#include <ArduinoJson.h>
#include <FS.h>
#include <ESPMetRED.h>
const char* MQTT_PUBLISH_TOPIC = "ESPM... | Update Relay.ino | Update Relay.ino | Arduino | mit | HobbytronicsPK/ESPMetRED |
b3dd0f23212ce2bb5558348b7dc1eab56df754e9 | arduino/ST_Door_Lock/ST_Door_Lock.ino | arduino/ST_Door_Lock/ST_Door_Lock.ino | //******************************************************************************************
// File: ST_Door_Lock.ino
// Authors: Josh Villbrandt
//
// Change History:
//
// Date Who What
// ---- --- ----
// 2015-03-13 Josh Villbrandt Inital script]
//
//**********... | //******************************************************************************************
// File: ST_Door_Lock.ino
// Authors: Josh Villbrandt
//
// Change History:
//
// Date Who What
// ---- --- ----
// 2015-03-13 Josh Villbrandt Inital script]
//
//**********... | Clean up so that everything works without SmartThings activated | Clean up so that everything works without SmartThings activated
| Arduino | mit | joshvillbrandt/SmartThings-Lock |
7da08d8fd8b6b0c40dc9b10cf6288ad8d77bf3fe | examples/firmware_check/firmware_check.ino | examples/firmware_check/firmware_check.ino | /*
* ----------------------------------------------------------------------------
* This is a MFRC522 library example; see https://github.com/miguelbalboa/rfid
* for further details and other examples.
*
* NOTE: The library file MFRC522.h has a lot of useful info. The functions are
* documented in MFRC522.cpp. P... | /*
* ----------------------------------------------------------------------------
* This is a MFRC522 library example; see https://github.com/miguelbalboa/rfid
* for further details and other examples.
*
* NOTE: The library file MFRC522.h has a lot of useful info. The functions are
* documented in MFRC522.cpp. P... | add firmware version to ShowReaderDetails | add firmware version to ShowReaderDetails
| Arduino | unlicense | yaalsn/rfid,Rotzbua/rfid,Rotzbua/rfid,hramrach/rfid,miguelbalboa/rfid,smallkid/rfid,mirko314/rfid,northDacoder/rfid,CapeSepias/rfid,sophiekovalevsky/rfid,LaloHao/rfid |
15fb1eea8170d52c93e3a1c349caa3991287aa6e | inverted-pendulum.ino | inverted-pendulum.ino | // Inverted pendulum - for Teensy 3.2
#include "Encoder.h"
#include "PIDControl.h"
#include "SimpleShell.h"
#define LEFT HIGH
#define RIGHT LOW
#define TRACK_ENCODER_PIN_A 0
#define TRACK_ENCODER_PIN_B 1
#define PENDULUM_ENCODER_PIN_A 2
#define PENDULUM_ENCODER_PIN_B 3
#define LEFT_BUMP_PIN 4
#define RIGHT_BUMP_PIN 5... | // Inverted pendulum - for Teensy 3.2
#include "Encoder.h"
#include "PIDControl.h"
#include "SimpleShell.h"
#define LEFT HIGH
#define RIGHT LOW
#define TRACK_ENCODER_PIN_A 0
#define TRACK_ENCODER_PIN_B 1
#define PENDULUM_ENCODER_PIN_A 2
#define PENDULUM_ENCODER_PIN_B 3
#define LEFT_BUMP_PIN 4
#define RIGHT_BUMP_PIN 5... | Implement set functions | Implement set functions
| Arduino | mit | andrewadare/inverted-pendulum |
39bc09f190ab1028f6d9e48a0249ef8a68abc030 | ksp-gegi/ksp-gegi.ino | ksp-gegi/ksp-gegi.ino |
#include <Arduino.h>
#include <Wire.h>
// https://bitbucket.org/fmalpartida/new-liquidcrystal/downloads
#include <LiquidCrystal_I2C.h> // Using version 1.2.1
// dł kabelków 15-20cm
// diody LED: niebieskie (bez rezystora, krótka nóżka) do GND, białe (z rezystorem, długa nóżka) do pinu
// potencjometr: niebieski z cza... |
#include <Arduino.h>
#include <Wire.h>
// https://bitbucket.org/fmalpartida/new-liquidcrystal/downloads
#include <LiquidCrystal_I2C.h> // Using version 1.2.1
// dł kabelków 15-20cm
// diody LED: niebieskie (bez rezystora, krótka nóżka) do GND, białe (z rezystorem, długa nóżka) do pinu
// potencjometr: niebieski z cza... | correct implementation, clear until end of the line | correct implementation, clear until end of the line
| Arduino | mit | ytmytm/ksp-gegi |
4bb0044ac6a797db3dfe320f769a63b11313611b | arduino/ledbutton/ledbutton.ino | arduino/ledbutton/ledbutton.ino | #include <Adafruit_NeoPixel.h>
#define WS2811_PIN 6
#define WS2811_LED_COUNT 8
const long DEBOUNCE_DELAY = 50;
const long TRIGGER_PULSE = 50;
#define BUTTON_STATE_COUNT 1
long buttonDebounceTime[BUTTON_STATE_COUNT];
boolean buttonState[BUTTON_STATE_COUNT];
long triggerReset = 0;
boolean ledState = 0;
boolean ledO... | #include <Adafruit_NeoPixel.h>
#define WS2811_PIN 6
#define WS2811_LED_COUNT 8
const long DEBOUNCE_DELAY = 50;
const long TRIGGER_PULSE = 50;
#define BUTTON_STATE_COUNT 1
long buttonDebounceTime[BUTTON_STATE_COUNT];
boolean buttonState[BUTTON_STATE_COUNT];
long triggerReset = 0;
boolean ledState = 0;
boolean ledO... | Refresh the LEDs every 2 second (within the Arduino firmware) | Refresh the LEDs every 2 second (within the Arduino firmware)
| Arduino | mit | jamesbulpin/meshblu-connector-ledbutton |
20ca6208fe30e37519bf553f2d905814c59cf6c3 | moros/moros.ino | moros/moros.ino | /*
* TODO:
* case
* flag - P0 BLOCKER S0
* -- have graphical representation of flag
* wiring diagram - P2 S3
* reset button (chronos style?) - P1
* time setting - P1
* OLEDs
*
*/
#include <SPI.h>
#include <TFT.h>
#include "printf.h"
#define NONE -1
#define DISPLAY_FONT_SIZE 7
#define CHAR_HEIGHT_PX DISPLAY_FONT_SI... | /*
* TODO:
* case
* flag - P0 BLOCKER S0
* -- have graphical representation of flag
* wiring diagram - P2 S3
* reset button (chronos style?) - P1
* time setting - P1
* OLEDs
*
*/
#include <SPI.h>
#include <TFT.h>
#include "printf.h"
#define NONE -1
#define DISPLAY_FONT_SIZE 7
#define CHAR_HEIGHT_PX DISPLAY_FONT_SI... | Rename function | Rename function
| Arduino | mit | adamf/Moros,adamf/Moros,adamf/Moros,adamf/Moros |
06e21538ad89c6e00a8a1c544db9de2eead49a9f | src/monitor-firmware.ino | src/monitor-firmware.ino | // Firmware for monitor board
#include "debounced_switch.h"
#include "edge_trigger.h"
#include "mx7219.h"
#include "pins.h"
#include "serialstatemachine.h"
// 16-bit address bus value
unsigned int address_bus;
// 8-bit data bus value
byte data_bus;
// Status bits
byte status_bits;
enum StatusBitMask {
SB_RWBAR... | // Firmware for monitor board
#include "debounced_switch.h"
#include "edge_trigger.h"
#include "mx7219.h"
#include "pins.h"
#include "serialstatemachine.h"
// 16-bit address bus value
unsigned int address_bus;
// 8-bit data bus value
byte data_bus;
// Status bits
byte status_bits;
enum StatusBitMask {
SB_RWBAR... | document single step command | document single step command
| Arduino | mit | rjw57/buri,rjw57/buri,rjw57/buri,rjw57/buri,rjw57/buri |
57c4e86828f6bcfb00e7330267ef87e50ce67bae | netzfrequenz.ino | netzfrequenz.ino | /**
* Bestimmung der Netzfrequenz
* Copyright 2015 by Ralf Th. Pietsch <ratopi@abwesend.de>
* LICENSE: MIT
*/
#define PROBE_COUNT 50
#define MICROS 1000000.
// #define KORREKTUR 1.001341341
#define KORREKTUR 1.
#define DEBUG 0
int min;
int max;
int val;
int i, j;
float freq;
long start;
long end;
void se... | /**
* Bestimmung der Netzfrequenz
* Copyright 2015-2022 by Ralf Th. Pietsch <ratopi@abwesend.de>
* LICENSE: MIT
*/
// Activate for more log output
// #define DEBUG
#define PROBE_COUNT 50
#define MICROS 1000000.
// #define KORREKTUR 1.001341341
#define KORREKTUR 1.
int min;
int max;
int val;
int i, j;
flo... | Debug message via preprocessor macros | Debug message via preprocessor macros
| Arduino | mit | ratopi/netzfrequenz |
cd310b32c4ae19ad99e4324bd5542c2c301c21e7 | examples/Time/CosaAlarm/CosaAlarm.ino | examples/Time/CosaAlarm/CosaAlarm.ino | /**
* @file CosaAlarm.ino
* @version 1.0
*
* @section License
* Copyright (C) 2014-2015, Mikael Patel
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of t... | /**
* @file CosaAlarm.ino
* @version 1.0
*
* @section License
* Copyright (C) 2014-2015, Mikael Patel
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of t... | Use RTC scheduler for Alarms as default. | Use RTC scheduler for Alarms as default.
| Arduino | lgpl-2.1 | jeditekunum/Cosa,jeditekunum/Cosa,jeditekunum/Cosa,dansut/Cosa,dansut/Cosa,jeditekunum/Cosa,mikaelpatel/Cosa,dansut/Cosa,mikaelpatel/Cosa,mikaelpatel/Cosa,mikaelpatel/Cosa,dansut/Cosa |
ad880d561a11eec8fbf0c435dd0224fbfa1cbf18 | AWebServer/AWebServer.ino | AWebServer/AWebServer.ino | /*
Copyright (c) 2013 Tilo Szepan, Immo Wache <tilo.szepan@web.de>
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated
documentation files (the "Software"), to deal in the Software without restriction, including without limitation
the rights to use, copy, mod... | /*
Copyright (c) 2013 Tilo Szepan, Immo Wache <https://github.com/tilos/AWebServer.git>
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated
documentation files (the "Software"), to deal in the Software without restriction, including without limitation
the rig... | Update AWebServer.ino | Update AWebServer.ino | Arduino | mit | tilos/AWebServer,tilos/AWebServer |
9d3d76b8de685cc48ac824a68746707155740bee | examples/esp8266/esp8266/esp8266.ino | examples/esp8266/esp8266/esp8266.ino | #include <ESP8266WiFi.h>
const char* ssid = "your_wifi_network_name";
const char* password = "your_wifi_network_password";
const int ledPin = 2;
WiFiServer server(1337);
void printWiFiStatus();
void setup(void) {
Serial.begin(115200);
WiFi.begin(ssid, password);
// Configure GPIO2 as OUTPUT.
pinMode(ledPin,... | #include <ESP8266WiFi.h>
const char* ssid = "your_wifi_network_name";
const char* password = "your_wifi_network_password";
const int ledPin = 2;
WiFiServer server(1337);
void printWiFiStatus();
void setup(void) {
Serial.begin(115200);
WiFi.begin(ssid, password);
// Configure GPIO2 as OUTPUT.
pinMode(ledPin,... | Remove some blank lines | Remove some blank lines
| Arduino | apache-2.0 | divineprog/evothings-examples,nbezembinder1/evothings-examples,divineprog/evothings-examples,InMyOrbit/evothings-examples,mikaelkindborg/evothings-examples,evothings/evothings-examples,evothings/evothings-examples,InMyOrbit/evothings-examples,gokr/evothings-examples,mikaelkindborg/evothings-examples,gokr/evothings-exam... |
a1287ce22d3e7fcfd0216c46b59008c5d76767a4 | AWSCPumpTiming/AWSCPumpTiming.ino | AWSCPumpTiming/AWSCPumpTiming.ino |
unsigned long t=0;
unsigned long tpump=0;
unsigned long tair=0;
int airstatus=0;
int pumpstatus=0;
//pins
const int Pump = 8;
const int Air = 7;
//Edit these times below to change factors
unsigned long PumpInterval= 60000 *360;//How often in min
unsigned long AirInterval= 60000 *15;//How often in min
unsigned long Pu... |
unsigned long t=0;
unsigned long tpump=0;
unsigned long tair=0;
int airstatus=0;
int pumpstatus=0;
//pins
const int Pump = 8;
const int Air = 7;
//Edit these times below to change factors
unsigned long PumpInterval= 60000 *240;//How often in min
unsigned long AirInterval= 60000 *15;//How often in min
unsigned long Pu... | Update AWSCPumpTiming.ino | Update AWSCPumpTiming.ino | Arduino | mit | dotsonlab/awsc,dotsonlab/awsc |
799f1e3ff64318d85a43fd3451c79cec0f07ca70 | testing/arduino/omniwheel4_EncoderD.ino | testing/arduino/omniwheel4_EncoderD.ino | #include "Arduino.h"
uint8_t motorPin1_1 = 4;
uint8_t motorPin1_2 = 5;
uint8_t motorPin1_speed = 3;
uint8_t motorPin1_A = A7;
uint8_t motorPin2_1 = 7;
uint8_t motorPin2_2 = 8;
uint8_t motorPin2_speed = 6;
uint8_t motorPin2_A = A6;
uint8_t motorPin3_1 = 10;
uint8_t motorPin3_2 = 11;
uint8_t motorPin3_speed = 9;
uint8... | #include "Arduino.h"
uint8_t motorPin1_1 = 4;
uint8_t motorPin1_2 = 5;
uint8_t motorPin1_speed = 3;
uint8_t motorPin1_A = A7;
uint8_t motorPin2_1 = 7;
uint8_t motorPin2_2 = 8;
uint8_t motorPin2_speed = 6;
uint8_t motorPin2_A = A6;
uint8_t motorPin3_1 = 10;
uint8_t motorPin3_2 = 11;
uint8_t motorPin3_speed = 9;
uint8... | extend mapping | extend mapping
| Arduino | apache-2.0 | MaxMorgenstern/EmeraldAI,MaxMorgenstern/EmeraldAI,MaxMorgenstern/EmeraldAI,MaxMorgenstern/EmeraldAI,MaxMorgenstern/EmeraldAI |
ac550e1f434d25bc3473edcb32d5677f70017f37 | microcontrollers/arduino-esp8266/oled-scan/oled-scan.ino | microcontrollers/arduino-esp8266/oled-scan/oled-scan.ino | /*
* Show the Wi-Fi band activity.
*
* Copyright (C) 2017 Serge Vakulenko, <vak@besm6.org>
*
* Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without l... | /*
* Show the Wi-Fi band activity.
*
* Copyright (C) 2017 Serge Vakulenko, <vak@besm6.org>
*
* Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without l... | Update comments. | Update comments. | Arduino | apache-2.0 | sergev/vak-opensource,sergev/vak-opensource,sergev/vak-opensource,sergev/vak-opensource,sergev/vak-opensource,sergev/vak-opensource,sergev/vak-opensource,sergev/vak-opensource,sergev/vak-opensource,sergev/vak-opensource,sergev/vak-opensource,sergev/vak-opensource,sergev/vak-opensource,sergev/vak-opensource,sergev/vak-o... |
28237331f706456f7b4647d9e90bb5deaf92338c | crypt-gears/gear_arduino/gear_arduino.ino | crypt-gears/gear_arduino/gear_arduino.ino | // hard-coded pin numbers for input/output
// TODO(benkraft): I am assuming for the sake of argument that these start at
// the top and go clockwise; fix once we know the correct positions.
int gear_connections[3][12] = {{ 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13},
{14, 15, 16, 17, ... | // PIN NUMBERS
int output_lights[7] = {38, 39, 40, 41, 42, 43, 44};
// TODO(benkraft): Do we still need these?
int gear_lodged[3] = {45, 46, 47};
int pot = A0;
int photoresistors[3] = {A1, A2, A3};
// TODO(bhomberg): calculate these numbers for real once mechanism is built; this is approx
int pot_locs[8] = {100, 20... | Rewrite for photoresistors | Rewrite for photoresistors
Also did some reorganization. I haven't actually filled in the logic to
decide which gears are where at the end of calibration yet.
| Arduino | mit | bhomberg/heterodyne,bhomberg/heterodyne,bhomberg/heterodyne,bhomberg/heterodyne,bhomberg/heterodyne |
036f3eee5fe398f23a0b1c68acb0734f4724437f | examples/QuickStart/QuickStart.ino | examples/QuickStart/QuickStart.ino | #include <TheThingsNetwork.h>
// Set your AppEUI and AppKey
const byte appEui[8] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
const byte appKey[16] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
#define debugSerial Serial
#define loraSerial Serial1
#def... | #include <TheThingsNetwork.h>
// Set your AppEUI and AppKey
const byte appEui[8] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
const byte appKey[16] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
#define debugSerial Serial
#define loraSerial Serial1
#def... | use byte instead of unsigned char | use byte instead of unsigned char
| Arduino | mit | TheThingsNetwork/arduino-device-lib,TheThingsNetwork/arduino-device-lib,TheThingsNetwork/arduino-device-lib |
7f421b51990029cc9d2cdf9e69a9c41fe448ef34 | contrib/gd3load.ino | contrib/gd3load.ino | #include <EEPROM.h>
#include <SPI.h>
#include <GD2.h>
#define SD_PIN 9
#include "transports/wiring.h"
#include "gd3load_assets.h"
GDTransport GDTR;
uint8_t gpio, gpio_dir;
void set_SDA(byte n)
{
GDTR.__wr16(REG_GPIO_DIR, gpio_dir | (0x03 - n)); // Drive SCL, SDA low
}
void set_SCL(byte n)
{
GDTR.__w... | #include <EEPROM.h>
#include <SPI.h>
#include <GD2.h>
#define SD_PIN 9
#include "transports/wiring.h"
#include "gd3load_assets.h"
GDTransport GDTR;
uint8_t gpio, gpio_dir;
void set_SDA(byte n)
{
GDTR.__wr16(REG_GPIO_DIR, gpio_dir | (0x03 - n)); // Drive SCL, SDA low
}
void set_SCL(byte n)
{
GDTR.__w... | Remove debug spew | Remove debug spew
| Arduino | bsd-3-clause | jamesbowman/gd2-lib,jamesbowman/gd2-lib,jamesbowman/gd2-lib |
eff2887786e35dc91a4166c1f50d75fc0ffaf487 | connect4.ino | connect4.ino | // Connect 4
// P Beard
// Jan 2015
char board[43];
// Array containing start position of each "win line"
byte lineStart[] = { 0, 7, 14, 21, 28, 35, 0, 1, 2, 3, 4, 5, 6, 14, 7, 0, 1, 2, 3, 3, 4, 5, 6, 13, 20};
// Array containing number of groups of 4 positions on each "win line"
byte lineReps[] = {... | // Connect 4
// P Beard
// Jan 2015
char board[43];
// Array containing start position of each "win line"
byte lineStart[] = { 0, 7, 14, 21, 28, 35, 0, 1, 2, 3, 4, 5, 6, 14, 7, 0, 1, 2, 3, 3, 4, 5, 6, 13, 20};
// Array containing number of groups of 4 positions on each "win line"
byte lineReps[] = {... | Update connect4.ino | Update connect4.ino
(Very) minor speed improvements | Arduino | mit | barnsleyio/connect4 |
015c950dd54cc584ee20320bb44ba861f3045780 | Launchpad_Data_Processor/Launchpad_Data_Processor.ino | Launchpad_Data_Processor/Launchpad_Data_Processor.ino | /* 25th SEPTEMBER 2014
========================================================================================
========================= Engineering Design 3A - FSAE TEAM 52 =========================
=====================================================... | /* 25th SEPTEMBER 2014
========================================================================================
========================= Engineering Design 3A - FSAE TEAM 52 =========================
=====================================================... | Update Launchpad_Data_Processor.ino | Update Launchpad_Data_Processor.ino
Added SD write routine on Matt's behalf, but it is now within another boolean condition so that we can still test without the SD connected.
Also cut a bunch of code that was commented out and updated the start/stop/reset string indicators. Starts in idle mode by default, so if us... | Arduino | mit | T52/T52_FSAE_Telemetry,T52/T52_FSAE_Telemetry |
4183f3f8e8b882791567896d983c4dba85c9fa98 | Arduino/Sensors/Capacitance/capSenseTest/capSenseTest.ino | Arduino/Sensors/Capacitance/capSenseTest/capSenseTest.ino | #include <CapacitiveSensor.h>
// 50k - 50M resistor between pins 2 & 3, pin 3 is sensor (receive) pin
CapacitiveSensor sensor = CapacitiveSensor(2,3);
void setup() {
// turn off autocalibrate on channel 1 - just as an example
sensor.set_CS_AutocaL_Millis(0xFFFFFFFF);
Serial.begin(9600);
}
void loop() {
long ... | #include <CapacitiveSensor.h>
// 50k - 50M resistor between pins 2 & 3, pin 3 is sensor (receive) pin
CapacitiveSensor sensor = CapacitiveSensor(2,3);
void setup() {
// turn off autocalibrate on channel 1 - just as an example
sensor.set_CS_AutocaL_Millis(0xFFFFFFFF);
Serial.begin(9600);
}
void loop() {
long ... | Update capSenseTest.ino | Update capSenseTest.ino
| Arduino | mit | carloscastellanos/teaching,carloscastellanos/teaching,carloscastellanos/teaching |
92737e2ab05be6ef95b4faf20566db35672e9248 | examples/StallGuard/StallGuard.ino | examples/StallGuard/StallGuard.ino | /**
* Author Teemu Mäntykallio
*
* Plot TMC2130 motor load using the stallGuard value.
* You can finetune the reading by changing the STALL_VALUE.
* This will let you control at which load the value will read 0
* and the stall flag will be triggered. This will also set pin DIAG1 high.
* A higher STALL_VALUE wil... | /**
* Author Teemu Mäntykallio
*
* Plot TMC2130 motor load using the stallGuard value.
* You can finetune the reading by changing the STALL_VALUE.
* This will let you control at which load the value will read 0
* and the stall flag will be triggered. This will also set pin DIAG1 high.
* A higher STALL_VALUE wil... | Use coolStep and report CS actual | Use coolStep and report CS actual
| Arduino | agpl-3.0 | teemuatlut/TMC2130Stepper |
e8d5329665e793aecf1ccc1fc87905dcf95676a1 | examples/Widgets/SDcard/SDcard.ino | examples/Widgets/SDcard/SDcard.ino | /**************************************************************
* Blynk is a platform with iOS and Android apps to control
* Arduino, Raspberry Pi and the likes over the Internet.
* You can easily build graphic interfaces for all your
* projects by simply dragging and dropping widgets.
*
* Downloads, docs, tuto... | /**************************************************************
* Blynk is a platform with iOS and Android apps to control
* Arduino, Raspberry Pi and the likes over the Internet.
* You can easily build graphic interfaces for all your
* projects by simply dragging and dropping widgets.
*
* Downloads, docs, tuto... | Use V pin notation | Use V pin notation
| Arduino | mit | ivankravets/blynk-library,blynkkk/blynk-library,blynkkk/blynk-library,ivankravets/blynk-library,blynkkk/blynk-library,ivankravets/blynk-library,blynkkk/blynk-library,blynkkk/blynk-library,ivankravets/blynk-library,ivankravets/blynk-library |
9e0a570ab1e04941dc05056aefb9e429b1732bc4 | ins-node/src/wifi_module/wifi_module.ino | ins-node/src/wifi_module/wifi_module.ino | #include <stdint.h>
#include <vector>
#include <utility>
#include <ESP8266WiFi.h>
#include "wifi_credentials.h"
ESP8266WiFiClass wifi;
EspClass espPower;
const uint8_t DEVICE_ID = 1; // The identification for the specific node
const char SERVER_IP[] = "192.168.0.136";
const int8_t CONNECTION_RETRIES = 3; // The maximu... | #include <stdint.h>
#include <vector>
#include <utility>
#include <ESP8266WiFi.h>
#include "wifi_credentials.h"
ESP8266WiFiClass wifi;
EspClass espPower;
const uint8_t DEVICE_ID = 1; // The identification for the specific node
const char SERVER_IP[] = "192.168.0.136";
const int8_t CONNECTION_RETRIES = 3; // The maximu... | Remove unused function | Remove unused function
| Arduino | apache-2.0 | platisd/indoor-navigation-system,platisd/indoor-navigation-system,platisd/indoor-navigation-system,platisd/indoor-navigation-system |
8272561e294234fab37db46b45d61e111546a3eb | chessclock/chessclock.ino | chessclock/chessclock.ino | /*
Thanks to Rudi Imbrechts (http://arduinows.blogspot.nl/) for the initial example.
Aansturen FDS132 LED matrix bord m.b.v. SPI.
*/
#include <SPI.h> // Om snelheid te winnen maken we gebruik van SPI.
#include "fds132text.h"
// Pinnen voor het aansturen van het FDS132 bord.
int row; ... | /*
Thanks to Rudi Imbrechts (http://arduinows.blogspot.nl/) for the initial example.
Aansturen FDS132 LED matrix bord m.b.v. SPI.
*/
#include <SPI.h> // Om snelheid te winnen maken we gebruik van SPI.
#include "fds132text.h"
// Pinnen voor het aansturen van het FDS132 bord.
int row; ... | Change timing for nicer view | Change timing for nicer view
| Arduino | mit | BartDeWaal/FDS132-textdriver |
9a5303306963d706c0f41f4f751045b6bb27e2c3 | temperature-relay.ino | temperature-relay.ino | #include "OneWire.h"
#include "WebServer.h"
#include "HttpClient.h"
#include "elapsedMillis.h"
#include <list>
#include <string>
#include "Sensors.h"
#include "ApiKeys.h"
using namespace std;
#define SCAN_INTERVAL 60000
#define TEMP_INTERVAL 10000
#define BLINK_INTERVAL 5000
#define POWER_INTERVAL 120000
#define WEAT... | #include "OneWire.h"
#include "WebServer.h"
#include "HttpClient.h"
#include "elapsedMillis.h"
#include <list>
#include <string>
#include "Sensors.h"
#include "ApiKeys.h"
using namespace std;
#define SCAN_INTERVAL 60000
#define TEMP_INTERVAL 10000
#define BLINK_INTERVAL 5000
#define POWER_INTERVAL 120000
#define WEAT... | Clean up publish Temp methods | Clean up publish Temp methods
| Arduino | mit | jeffutter/temperature-relay |
67a9380c450e14d18c79198c643d6a39d132f83c | demos/ir_receiver_array_demo/ir_receiver_array_demo.ino | demos/ir_receiver_array_demo/ir_receiver_array_demo.ino | //IR Receiver Array Demo
//setup runs once at beginning
void setup(){
//initialize serial communication
Serial.begin(9600);
//initialize IR receiver pins
pinMode(2,INPUT);
pinMode(3,INPUT);
pinMode(4,INPUT);
pinMode(5,INPUT);
pinMode(6,INPUT);
pinMode(7,INPUT);
pinMode(8,INPUT);
}
//loop repeats... | //IR Receiver Array Demo
//setup runs once at beginning
void setup(){
//initialize serial communication
Serial.begin(9600);
//initialize IR receiver pins
pinMode(2,INPUT);
pinMode(3,INPUT);
pinMode(4,INPUT);
pinMode(5,INPUT);
pinMode(6,INPUT);
pinMode(7,INPUT);
pinMode(8,INPUT);
}
//loop repeats... | Update ir_receiver_array_demo.ino | Update ir_receiver_array_demo.ino | Arduino | mit | TinkerUMD/TinkerUMD |
e6065de0828913b4aa416163cb65729c996b92cc | sketches/EnerginoEthernet/EnerginoEthernet.ino | sketches/EnerginoEthernet/EnerginoEthernet.ino | /*
* Energino
*
* Energino is a energy consumption meter for DC loads
*
* This sketch connects an Arduino equipped with the Energino
* shield and with an Ethernet shield with a web service
* implementing the COSM (formely Pachube) REST API. It also
* implements a serial interface.
*
* Circuit:
* Analog in... | /*
* Energino
*
* Energino is a energy consumption meter for DC loads
*
* This sketch connects an Arduino equipped with the Energino
* shield and with an Ethernet shield with a web service
* implementing the COSM (formely Pachube) REST API. It also
* implements a serial interface.
*
* Circuit:
* Analog in... | bring the energino ethernet code in sync with the yun | bring the energino ethernet code in sync with the yun
| Arduino | bsd-3-clause | rriggio/energino,rriggio/energino,rriggio/energino,rriggio/energino |
5125aaa25e6000c993cfdda699da263d5217636a | DriverBoards/ArduinoMega64/firmware/DriverMEGA/DriverMEGA.ino | DriverBoards/ArduinoMega64/firmware/DriverMEGA/DriverMEGA.ino | /* To compile this file correctly you will need to:
*** add the following inline functions in the public interface (after "public:") of Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino\HardwareSerial.h
inline bool _dataAvailable() {return _rx_buffer_head != _rx_buffer_tail; }
inline byte _peekData() ... | /* To compile this file correctly you will need to:
*** add the following inline functions in the public interface (after "public:") of Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino\HardwareSerial.h
inline bool _dataAvailable() {return _rx_buffer_head != _rx_buffer_tail; }
inline byte _peekData() ... | Update DriverMEGA.ino | Update DriverMEGA.ino | Arduino | mit | asiermarzo/Ultraino,asiermarzo/Ultraino |
6c22ccdeaad0484a7128c0847472ca2bbf2fe93f | create/files/Ethernet.ino | create/files/Ethernet.ino | #include <SPI.h>
#include <Ethernet.h>
#include "aWOT.h"
byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
EthernetServer server(80);
WebApp app;
void setup() {
while (!Ethernet.begin(mac)) {
delay(500);
Serial.print(".");
}
Serial.println(Ethernet.localIP());
app.use(staticFiles());
server.beg... | #include <SPI.h>
#include <Ethernet.h>
#include "aWOT.h"
byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
EthernetServer server(80);
WebApp app;
void setup() {
Serial.begin(115200);
while (!Ethernet.begin(mac)) {
delay(500);
Serial.print(".");
}
Serial.println(Ethernet.localIP());
app.use(stat... | Clean up Ethernet template | Clean up Ethernet template
| Arduino | mit | lasselukkari/awot-scripts,lasselukkari/awot-scripts,lasselukkari/awot-scripts,lasselukkari/awot-scripts |
37397a790497a3890383c5abf9d2a03f13ba05e7 | Nokia_5110/Nokia_5110.ino | Nokia_5110/Nokia_5110.ino | #define RST 2
#define CE 3
#define DC 4
#define DIN 5
#define CLK 6
void lcdCommand(byte command){
digitalWrite(DC, LOW); // DC pin is low for commands
digitalWrite(CE, LOW);
shiftOut(DIN, CLK, MSBFIRST, command); // transmit serial data
digitalWrite(CE, HIGH);
}
/**
* @param contrast could be 1 to 1... | #define RST 2
#define CE 3
#define DC 4
#define DIN 5
#define CLK 6
void lcdCommand(byte command){
digitalWrite(DC, LOW); // DC pin is low for commands
digitalWrite(CE, LOW);
shiftOut(DIN, CLK, MSBFIRST, command); // transmit serial data
digitalWrite(CE, HIGH);
}
/**
* @param contrast could be 1 to 1... | rename contrast function to setContrast | rename contrast function to setContrast
| Arduino | mit | baghayi/Nokia_5110,baghayi/Nokia_5110 |
f4dfbcabc145466ac3399ecc7eb43c65c2c9bcc1 | 2018-Firefighter/2018-Firefighter.ino | 2018-Firefighter/2018-Firefighter.ino | #include <Servo.h>
#include <Ultrasonic.h>
#include "FreqCount.h"
#define LEFT_SERVO_PIN 4
#define RIGHT_SERVO_PIN 5
#define IR_PIN 6
#define EXTINGUISHER_PIN 7
#define MIC_PIN 43
#define FLAME_LED 9
#define MIC_LED 11
#define BABY_LED 17
#define CAMERA 15
#define CAMERA_LED 16
#define FRONT_US_ECHO 2
#define F... | #include <Servo.h>
#include <Ultrasonic.h>
#include "FreqCount.h"
#define LEFT_SERVO_PIN 4
#define RIGHT_SERVO_PIN 5
#define IR_PIN 6
#define EXTINGUISHER_PIN 7
#define MIC_PIN 43
#define FLAME_LED 9
#define MIC_LED 11
#define BABY_LED 17
#define CAMERA 15
#define CAMERA_LED 16
#define FRONT_US_ECHO 2
#define F... | Fix mazeNav compliation errors | Fix mazeNav compliation errors
| Arduino | mit | GW-Robotics/2018-Firefighter |
0ae6ebaee7e5c8d7e89ab90460c528b2b49b19bd | ComboKeypad/Keypad.ino | ComboKeypad/Keypad.ino |
//
//USER VARIABLES, Variables that YOU change for YOUR preferences
const int buttons[] {7, 6, 5, 4}; //The PIN of all of the buttons
const int combination[] = {3, 1, 2, 4}; //what the combination is
const bool useFiveVoltpin = false; //Change this if you want to use the
///////////////////////////////////////... |
//
//USER VARIABLES, Variables that YOU change for YOUR preferences
const int buttons[] {7, 6, 5, 4}; //The PIN of all of the buttons
const int combination[] = {3, 1, 2, 4}; //what the combination is
const bool useFiveVoltpin = false; //Change this if you want to use the
///////////////////////////////////////... | Put back the code... | Put back the code... | Arduino | mit | TeodorLys/Arduino_Projects |
4c7fdd07ac3e099953478677393aea216bb3169d | ComboKeypad/Keypad.ino | ComboKeypad/Keypad.ino | //USER VARIABLES, Variables that YOU change for YOUR preferences
const int buttons[] {7, 6, 5, 4}; //The PIN of all of the buttons
const int combination[] = {3, 1, 2, 4}; //what the combination is, to add just add a "," and a number
const int numOfCombos = sizeof(combination) / sizeof(combination[0]); //How many... | //USER VARIABLES, Variables that YOU change for YOUR preferences
const int buttons[] {7, 6, 5, 4}; //The PIN of all of the buttons
const int combination[] = {3, 1, 2, 4}; //what the combination is, to add just add a "," and a number
const int numOfCombos = sizeof(combination) / sizeof(combination[0]); //How many... | Update Keypad.ino | Update Keypad.ino | Arduino | mit | TeodorLys/Arduino_Projects |
8ec0a15c469fb23c91eadd30bd7769071d3ecd89 | Cool_Light_WriteTag/Cool_Light_WriteTag.ino | Cool_Light_WriteTag/Cool_Light_WriteTag.ino | #if 0
#include <SPI.h>
#include <PN532_SPI.h>
#include <PN532.h>
#include <NfcAdapter.h>
PN532_SPI pn532spi(SPI, 10);
NfcAdapter nfc = NfcAdapter(pn532spi);
#else
#include <Wire.h>
#include <PN532_I2C.h>
#include <PN532.h>
#include <NfcAdapter.h>
//change the number after colon like "0" or "1" or "2".
#define WRITE_... | #if 0
#include <SPI.h>
#include <PN532_SPI.h>
#include <PN532.h>
#include <NfcAdapter.h>
PN532_SPI pn532spi(SPI, 10);
NfcAdapter nfc = NfcAdapter(pn532spi);
#else
#include <Wire.h>
#include <PN532_I2C.h>
#include <PN532.h>
#include <NfcAdapter.h>
//change the number after colon like "1" or "2" or "3".
#define WRITE_... | Update Cool_Light_WriteTag.ino | Update Cool_Light_WriteTag.ino | Arduino | mit | kingsongchen/Xadow_Edison_Demos,Seeed-Studio/Xadow_Edison_Demos,Seeed-Studio/Xadow_Edison_Demos,kingsongchen/Xadow_Edison_Demos |
ef7ea45f657d52991ae62728e997f9a04f73ecf9 | Esp32Application/Esp32Application.ino | Esp32Application/Esp32Application.ino | /**
* @file
*
* MIT License
*
* @copyright (c) 2018 Daniel Schenk <danielschenk@users.noreply.github.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, inc... | /**
* @file
*
* MIT License
*
* @copyright (c) 2018 Daniel Schenk <danielschenk@users.noreply.github.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, inc... | Use a init task so OS resources can be directly used | Use a init task so OS resources can be directly used
Also start the scheduler which was not done yet.
| Arduino | mit | danielschenk/mlc2,danielschenk/mlc2,danielschenk/mlc2 |
d741c4445509358da9210a2ff182844957eb014b | code/code.ino | code/code.ino | #define BAUD_RATE 9600 //general baud rates: 300, 600, 1200, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600, and 115200
#include <SD.h>
#include <Wire.h>
#include "PID.h"
void Task100Hz(void);
extern void initI2CMPU(void);
extern void getMPUValues(void);
extern void printMPUValues(void);
extern void measureIMU... | #define BAUD_RATE 9600 //general baud rates: 300, 600, 1200, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600, and 115200
#define SD_CARD_PIN 53
#include <SD.h>
#include <Wire.h>
#include "PID.h"
void Task100Hz(void);
extern void initI2CMPU(void);
extern void getMPUValues(void);
extern void printMPUValues(void);... | Update code.ino | Update code.ino | Arduino | unlicense | IITK-SUMMER-QUAD-2015-TEAM/QuadIITK,IITK-SUMMER-QUAD-2015-TEAM/QuadIITK |
14b13233cc8cdac82e0c0e0c1955d640bc5901d9 | arduino/rflink/rflink.ino | arduino/rflink/rflink.ino | #include <stdbool.h>
#include <stdint.h>
#include <string.h>
#include "radio.h"
#include "cmdproc.h"
#include "editline.h"
#include "hal.h"
#include "SPI.h"
#include "EEPROM.h"
// EEPROM address of node id
#define EE_ADDR_ID 0
// number of time division slots
#define NUM_SLOTS 9
static void print(char *fmt, ...... | #include <stdbool.h>
#include <stdint.h>
#include <string.h>
#include "radio.h"
#include "cmdproc.h"
#include "editline.h"
#include "hal.h"
#include "SPI.h"
#include "EEPROM.h"
// EEPROM address of node id
#define EE_ADDR_ID 0
// number of time division slots
#define NUM_SLOTS 9
static void print(char *fmt, ...... | Add !s indication for a sent packet | Add !s indication for a sent packet
| Arduino | mit | bertrik/rflink,bertrik/rflink |
1c7e476fc0daa03a1fd79453b2260b5e6ba911bb | PulseSensorAmped_Arduino_1dot4/Timer_Interrupt_Notes.ino | PulseSensorAmped_Arduino_1dot4/Timer_Interrupt_Notes.ino | /*
These notes put together by Joel Murphy for Pulse Sensor Amped, 2015
The code that this section is attached to uses a timer interrupt
to sample the Pulse Sensor with consistent and regular timing.
The code is setup to read Pulse Sensor signal at 500Hz (every 2mS).
The reasoning for this can be found here:... | /*
These notes put together by Joel Murphy for Pulse Sensor Amped, 2015
The code that this section is attached to uses a timer interrupt
to sample the Pulse Sensor with consistent and regular timing.
The code is setup to read Pulse Sensor signal at 500Hz (every 2mS).
The reasoning for this can be found here:... | Update Interrupt notes | Update Interrupt notes
Added an example of how to use Pulse Sensor with a 'software timer interrupt' for folks using microcontrollers that the other examples don't currently support. | Arduino | mit | WorldFamousElectronics/PulseSensor_Amped_Arduino |
06d2eca557e405aa27ddaeda9a0fd259a3b55ab3 | HackcenterLicht.ino | HackcenterLicht.ino | #include <Wire.h>
#include <PCA9685.h>
#include <ESP8266WiFi.h>
#include <WiFiClient.h>
#include <ArduinoJson.h>
#include <ESP8266WebServer.h>
#include "settings.h"
#include "static.h"
// Used to store the public values, because mapping the values
// introduce inaccuracy / inconsistent responses
uint8_t lightValues... | #include <Wire.h>
#include <PCA9685.h>
#include <ESP8266WiFi.h>
#include <WiFiClient.h>
#include <ArduinoJson.h>
#include <ESP8266WebServer.h>
#include "settings.h"
#include "static.h"
// Used to store the public values, because mapping the values
// introduce inaccuracy / inconsistent responses
uint8_t lightValues... | Add mapping to fix hardware errors | Add mapping to fix hardware errors
| Arduino | mit | b4ckspace/esp8266-hackcenter-licht,b4ckspace/esp8266-hackcenter-licht,b4ckspace/esp8266-hackcenter-licht |
fff91500a5a58c8ef56bffaf3ee221333b8c2937 | arduino/opencr_arduino/opencr/libraries/OpenManipulator/example/Arduino/Test/path/path.ino | arduino/opencr_arduino/opencr/libraries/OpenManipulator/example/Arduino/Test/path/path.ino | #include <OMDynamixel.h>
#include <OMPath.h>
#include <vector>
#define DXL_SIZE 3
#define BAUD_RATE 57600
#define DEG2RAD (M_PI / 180.0)
#define RAD2DEG (180.0 / M_PI)
#define CONTROL_PERIOD 0.008f
#define MOVE_TIME 3.0f
OM_PATH::JointTrajectory joint_trajectory(DXL_SIZE);
std::vector<Trajectory> start_trajectory;
... | #include <OMDynamixel.h>
#include <OMPath.h>
#include <vector>
#define DXL_SIZE 3
#define BAUD_RATE 57600
#define DEG2RAD (M_PI / 180.0)
#define RAD2DEG (180.0 / M_PI)
#define CONTROL_TIME 0.008f
#define MOVE_TIME 3.0f
OM_PATH::JointTrajectory joint_trajectory(DXL_SIZE);
std::vector<Trajectory> start_trajectory;
st... | change time var | change time var
| Arduino | apache-2.0 | ROBOTIS-GIT/OpenCR,ROBOTIS-GIT/OpenCR,ROBOTIS-GIT/OpenCR,ROBOTIS-GIT/OpenCR |
d85830213f93a98baaf31fde67e17fb7516b3a04 | Example/Example.ino | Example/Example.ino | #include <SPI.h>
#include <WiFi101.h>
#include "Adafruit_MQTT.h"
#include "Adafruit_MQTT_Client.h"
/************************* Wifi Setup *********************************/
char ssid[] = "yourNetwork"; // your network SSID (name)
char pass[] = "secretPassword"; // your network password
int status = WL_I... | #include <SPI.h>
#include <WiFi101.h>
#include "Adafruit_MQTT.h"
#include "Adafruit_MQTT_Client.h"
/************************* Wifi Setup *********************************/
char ssid[] = "yourNetwork"; // your network SSID (name)
char pass[] = "secretPassword"; // your network password
int status = WL_I... | Update Example.ino | Update Example.ino | Arduino | mit | SXHXC/Weather-Station-Arduino-MKR1000-Adafruit-IO |
e15a7c8edec2fc3fd229a0943ae3e8a18abda2b5 | WirelessTrigger.ino | WirelessTrigger.ino | #define ROLE_GROUND 0
#define ROLE_SKY 1
// SET THE TARGET ROLE HERE -------------------------------
#define ROLE ROLE_GROUND
// Standard libraries
#include <Arduino.h>
#include <printf.h>
// Radio comms
#include <RF24_config.h>
#include <nRF24L01.h>
#include <RF24.h>
#include <printf.h>
#if ROLE ==... | #define ROLE_GROUND 0
#define ROLE_SKY 1
// SET THE TARGET ROLE HERE -------------------------------
#define ROLE ROLE_SKY
// Standard libraries
#include <Arduino.h>
#include <printf.h>
// Radio comms
#include <RF24_config.h>
#include <nRF24L01.h>
#include <RF24.h>
#include <printf.h>
#if ROLE == RO... | Add altitude sensor | Add altitude sensor
| Arduino | mit | WasabiFan/aerial-release-system,WasabiFan/aerial-release-system |
f3920d96b1dc15770785edafd100c559d3b33510 | examples/arduino/OscEther/OscEther.ino | examples/arduino/OscEther/OscEther.ino | #include <ArduinoOSC.h>
// Ethernet stuff
const IPAddress ip (192, 168, 1, 201);
uint8_t mac[] = {0xAB, 0xCD, 0xEF, 0x01, 0x23, 0x45};
// for ArduinoOSC
const char* host = "192.168.2.20";
const int recv_port = 54321;
const int bind_port = 54345;
const int send_port = 55555;
const int publish_port = 54445;
// send / r... | #include <ArduinoOSC.h>
// Ethernet stuff
uint8_t mac[] = {0xAB, 0xCD, 0xEF, 0x01, 0x23, 0x45};
const IPAddress ip (192, 168, 1, 201);
const IPAddress dns (192, 168, 1, 1);
const IPAddress gateway (192, 168, 1, 1);
const IPAddress subnet (255, 255, 255, 0);
// for ArduinoOSC
const char* host = "192.168.1.200";
const ... | change ip for simplicity | change ip for simplicity
| Arduino | mit | hideakitai/ArduinoOSC,hideakitai/ArduinoOSC |
84b09eef2c6ab7e4479244153e8e9705eb86a559 | V1_0.ino | V1_0.ino | #include <avr/io.h>
#include <avr/interrupt.h>
#include <util/crc16.h>
#include <SPI.h>
#include <RFM22.h>
#include <TinyGPS.h>
#define ASCII 7 // ASCII 7 or 8
#define STOPBITS 2 // Either 1 or 2
#define TXDELAY 0 // Delay between sentence TX's
#define RTTY_BAUD 50 ... | #include <avr/io.h>
#include <avr/interrupt.h>
#include <util/crc16.h>
#include <SPI.h>
#include <RFM22.h>
#include <TinyGPS.h>
#define ASCII 7 // ASCII 7 or 8
#define STOPBITS 2 // Either 1 or 2
#define TXDELAY 0 // Delay between sentence TX's
#define RTTY_BAUD 50 ... | Update callsign to "KOMO-1" (a tribute to trash bags) | Update callsign to "KOMO-1" (a tribute to trash bags)
| Arduino | bsd-2-clause | bertrik/picoballoon |
8db63e933eaffc429df10cb81311432ceed74213 | ArduboyLife/ArduboyLife.ino | ArduboyLife/ArduboyLife.ino | // -------------------------------------
// Conway's Game Of Life for the Arduboy
// -------------------------------------
/*
Copyright (c) 2015-2019 Scott Allen
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
i... | // -------------------------------------
// Conway's Game Of Life for the Arduboy
// -------------------------------------
/*
Copyright (c) 2015-2019 Scott Allen
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
i... | Fix issue with generating a random number | Fix issue with generating a random number
| Arduino | mit | MLXXXp/ArduboyLife |
2395bee77eee47af7984850ce5368f4b7a087da7 | examples/Multiple/ParallelOutputDemo/ParallelOutputDemo.ino | examples/Multiple/ParallelOutputDemo/ParallelOutputDemo.ino | #include<FastLED.h>
#define NUM_LEDS_PER_STRIP 64
#define NUM_STRIPS 8
CRGB leds[NUM_STRIPS * NUM_LEDS_PER_STRIP];
// Pin layouts on the teensy 3:
// WS2811_PORTD: 2,14,7,8,6,20,21,5
// WS2811_PORTC: 15,22,23,9,10,13,11,12
//
// Pin layouts on the due
// WS2811_PORTA: 69,68,61,60,59,100,58,31 (note: pin 100 only ava... | #include<FastLED.h>
#define NUM_LEDS_PER_STRIP 64
// Note: this can be 12 if you're using a teensy 3 and don't mind soldering the pads on the back
#define NUM_STRIPS 8
CRGB leds[NUM_STRIPS * NUM_LEDS_PER_STRIP];
// Pin layouts on the teensy 3/3.1:
// WS2811_PORTD: 2,14,7,8,6,20,21,5
// WS2811_PORTC: 15,22,23,9,10,13... | Add note about 12-way output for Teensy3 PORTC | Add note about 12-way output for Teensy3 PORTC
| Arduino | mit | PaulStoffregen/FastLED,FastLED/FastLED,wilhelmryan/FastLED,kcouck/FastLED,PaulStoffregen/FastLED,neographophobic/FastLED,eshkrab/FastLED-esp32,FastLED/FastLED,tullo-x86/FastLED,remspoor/FastLED,remspoor/FastLED,NicoHood/FastLED,wilhelmryan/FastLED,tullo-x86/FastLED,neographophobic/FastLED,FastLED/FastLED,felixLam/FastL... |
a729ee70f95e61e7532a6f1336ba570a151a9d5f | examples/Basics/PowerOFF/PowerOFF.ino | examples/Basics/PowerOFF/PowerOFF.ino | #include <M5Stack.h>
// the setup routine runs once when M5Stack starts up
void setup(){
// initialize the M5Stack object
M5.begin();
// Lcd display
M5.Lcd.println("This is software power off demo");
M5.Lcd.println("Press the button A to power off.");
// Set the wakeup button
M5.setWakeupButton(BUTT... | #include <M5Stack.h>
// the setup routine runs once when M5Stack starts up
void setup(){
// initialize the M5Stack object
M5.begin();
// Lcd display
M5.Lcd.println("This is software power off demo");
M5.Lcd.println("Press the button A to power off.");
// Set the wakeup button
M5.Power.setWakeupButto... | Update poser off example for new api. | Update poser off example for new api. | Arduino | mit | m5stack/M5Stack,m5stack/M5Stack,m5stack/M5Stack |
cb79350b83f3d80356445b8d72b8a0af4f8d461e | _06-power_meter/_06-power_meter.ino | _06-power_meter/_06-power_meter.ino | #include <PubSubClient.h>
#include <ESP8266WiFi.h>
// https://github.com/openenergymonitor/EmonLib
#include "EmonLib.h" // Include Emon Library
#include <Average.h>
#define _IS_MY_HOME
// WIFI
#ifdef _IS_MY_HOME
#include "/usr/local/src/ap_settingii.h"
//#include "/usr/local/src/ap_setting.h"
#else
#include "ap_settin... | #include <PubSubClient.h>
#include <ESP8266WiFi.h>
// https://github.com/openenergymonitor/EmonLib
#include "EmonLib.h" // Include Emon Library
#include <Average.h>
#define _IS_MY_HOME
// WIFI
#ifdef _IS_MY_HOME
#include "/usr/local/src/ap_settingii.h"
//#include "/usr/local/src/ap_setting.h"
#else
#include "ap_settin... | reconnect from 5000 to 1000(1sec) | reconnect from 5000 to 1000(1sec)
| Arduino | lgpl-2.1 | chaeplin/esp8266_and_arduino,chaeplin/esp8266_and_arduino,chaeplin/esp8266_and_arduino |
928e6587586a0d16a55570b6131a54f0399f4499 | ha_mqtt_rgb_light/ha_mqtt_rgb_light.ino | ha_mqtt_rgb_light/ha_mqtt_rgb_light.ino | /*
MQTT RGB Light for Home-Assistant - NodeMCU (ESP8266)
https://home-assistant.io/components/light.mqtt/
Libraries :
- ESP8266 core for Arduino : https://github.com/esp8266/Arduino
- PubSubClient : https://github.com/knolleary/pubsubclient
Sources :
- File > Examples > ES8266WiFi > WiFiClient... | /*
MQTT RGB Light for Home-Assistant - NodeMCU (ESP8266)
https://home-assistant.io/components/light.mqtt/
Libraries :
- ESP8266 core for Arduino : https://github.com/esp8266/Arduino
- PubSubClient : https://github.com/knolleary/pubsubclient
Sources :
- File > Examples > ES8266WiFi > WiFiClient... | Update ha_mqtt_rgb_light.ino | Update ha_mqtt_rgb_light.ino | Arduino | mit | mertenats/Open-Home-Automation,mertenats/Open-Home-Automation |
4fda900b84b94417a9833a2069656f50d97f5dac | examples/HMClientTest.ino | examples/HMClientTest.ino | #include <HMClient.h>
|
#include <ESP8266WiFi.h>
#include <HMClient.h>
const char* ssid = "Your SSID";
const char* passcode = "Your PASSCODE";
HMClient HM_Default;
HMClient HMU_UserDefined("Server1");
void setup() {
// put your setup code here, to run once: Serial.begin(115200); Serial.flush(); Serial.println("Booting"); WiFi.... | Update HMClientTest.ino | Update HMClientTest.ino | Arduino | mit | IceMan66/HMClient |
ac0df17f2c3cef8897e84ee2a06a311dbba2e492 | examples/pt100_temperature/pt100_temperature.ino | examples/pt100_temperature/pt100_temperature.ino |
#include <Wire.h>
#include <SPI.h>
/***************************************************
This is a library for the Adafruit PT100/P1000 RTD Sensor w/MAX31865
Designed specifically to work with the Adafruit RTD Sensor
----> https://www.adafruit.com/products/3328
This sensor uses SPI to communicate, 4 pins ... |
#include <Wire.h>
#include <SPI.h>
/***************************************************
This is a library for the Adafruit PT100/P1000 RTD Sensor w/MAX31865
Designed specifically to work with the Adafruit RTD Sensor
----> https://www.adafruit.com/products/3328
This sensor uses SPI to communicate, 4 pins ... | Update pt100_temperature.ino | Update pt100_temperature.ino
Janitorial formatting. | Arduino | bsd-2-clause | drhaney/pt100rtd |
479362a27c93dba6f2c3fef78890196dc4ba1147 | firmware/examples/spark-plotly.ino | firmware/examples/spark-plotly.ino | #include "spark-plotly.h"
#define DATA_POINTS 4
char* data_point_tokens[NUM_TOKENS] = {"token1", "token2", "token3","token4"};
plotly graph = plotly("username", "secret", streaming_tokens, "streamname", DATA_POINTS);
void setup() {
graph.init();
graph.fileopt = "extend";
graph.openStream();
}
void loop() ... | #include "spark-plotly.h"
#define DATA_POINTS 4
char* data_point_tokens[NUM_TOKENS] = {"token1", "token2", "token3","token4"};
plotly graph = plotly("username", "secret", data_points_tokens, "streamname", DATA_POINTS);
void setup() {
graph.init();
graph.fileopt = "extend";
graph.openStream();
}
void loop(... | Update spark-plotly.ino | Update spark-plotly.ino | Arduino | mit | bigmacd/spark-plotly,jdecked/spark-plotly |
53bb387f7fabdbc17b41e11d9b90579691afa932 | simu_buttonreader_teensy_wheel/simu_buttonreader_teensy_wheel.ino | simu_buttonreader_teensy_wheel/simu_buttonreader_teensy_wheel.ino | /*
* Code to put on the Wheel (connected with Bluetooth to a another system)
for wireless bluetooth button/shifter system using
two Teensy 3.2 microcontrollers and 2 HC-05 bluetooth modules.
Authors: Mika Takala & Juha Koljonen 2016
PINOUT
------------------------------------------------------------... | /*
* Code to put on the Wheel (connected with Bluetooth to a another system)
for wireless bluetooth button/shifter system using
two Teensy 3.2 microcontrollers and 2 HC-05 bluetooth modules.
Authors: Mika Takala & Juha Koljonen 2016
PINOUT
------------------------------------------------------------... | Add files via upload | Add files via upload
Fixed some bugs. | Arduino | apache-2.0 | mtakala/simracing_wireless_buttons |
8543a20efa1a5318e575c70d8fdac772af8b65a6 | Guzheng/Guzheng.ino | Guzheng/Guzheng.ino | /* Code for laser guzheng
* Copyright (C) 2016 Jason Lu
*
* Licensed under the MIT License
*/
/* Uncomment the define if you are using a wind instrument, such
* as a trumpet or flute. It will disable several things that
* are specific to string and percussion instruments. DO NOT
* uncomment it if you are usi... | /* Code for laser guzheng
* Copyright (C) 2016 Jason Lu
*
* Licensed under the MIT License
*/
/* Uncomment the define if you are using a wind instrument, such
* as a trumpet or flute. It will disable several things that
* are specific to string and percussion instruments. DO NOT
* uncomment it if you are usi... | Fix new flag code | Fix new flag code
Fixed some bugs, such as one-off bugs and logic errors
| Arduino | mit | PoisonNinja/LaserHarp,PoisonNinja/LaserHarp,PoisonNinja/LaserHarp |
9c64eae1f9eacc32e8d32a46a113e0e33d9e5625 | estop/code/SPI_rf24L01_TX/SPI_rf24L01_TX.ino | estop/code/SPI_rf24L01_TX/SPI_rf24L01_TX.ino | /*********************************************************************
** Device: nRF24L01+ **
** File: EF_nRF24L01_TX.c **
** **
** ... | /*********************************************************************
** Device: nRF24L01+ **
** File: EF_nRF24L01_TX.c **
** **
** ... | Remove toggle mode in estop | Remove toggle mode in estop
| Arduino | apache-2.0 | baranusluel/igvc-electrical,baranusluel/igvc-electrical,baranusluel/igvc-electrical |
bf6e6d4410abfb3a48ef140fe8c1b6489ffb8a6b | examples/AIC_Shield/AudioPassThru_Quad/AudioPassThru_Quad.ino | examples/AIC_Shield/AudioPassThru_Quad/AudioPassThru_Quad.ino | /*
* AudioPassThru_Quad
*
* Created: Chip Audette, OpenAudio, May 2019
* Purpose: Demonstrate basic audio pass-thru using the Tympan Audio Board
* with the AIC Shield
*
* Uses Teensy Audio default sample rate of 44100 Hz with Block Size of 128
*
* License: MIT License, Use At Your Own Risk
*
*/
//here a... | /*
* AudioPassThru_Quad
*
* Created: Chip Audette, OpenAudio, May 2019
* Purpose: Demonstrate basic audio pass-thru using the Tympan Audio Board
* with the AIC Shield
*
* Uses Teensy Audio default sample rate of 44100 Hz with Block Size of 128
*
* License: MIT License, Use At Your Own Risk
*
*/
//here a... | remove unneeded pin declarations | AudioPassThru_Quad: remove unneeded pin declarations | Arduino | mit | Tympan/Tympan_Library,Tympan/Tympan_Library,Tympan/Tympan_Library |
9d5dd009620c01225d9902387d84a4b7c313ba07 | examples/GPRS_OutgoingCall_Software/GPRS_OutgoingCall_Software.ino | examples/GPRS_OutgoingCall_Software/GPRS_OutgoingCall_Software.ino | // библиотека для работы с GPRS устройством
#include <GPRS_Shield_Arduino.h>
// библиотека для эмуляции Serial порта
// она нужна для работы библиотеки GPRS_Shield_Arduino
#include <SoftwareSerial.h>
// номер на который будем звонить
#define PHONE_NUMBER "+79263995140"
// создаём объект класса GPRS
// и передаё... | // библиотека для работы с GPRS устройством
#include <GPRS_Shield_Arduino.h>
// библиотека для эмуляции Serial порта
// она нужна для работы библиотеки GPRS_Shield_Arduino
#include <SoftwareSerial.h>
// номер на который будем звонить
#define PHONE_NUMBER "+79263995140"
// создаём объект класса GPRS
// и передаё... | Update GPRS_OutgoingCall_Software.ino | Update GPRS_OutgoingCall_Software.ino | Arduino | mit | amperka/gprs-shield,amperka/gprs-shield |
8e1a0d32317afdc3b3f0b86279e0c1c19a356e75 | ArduinoCar/ArduinoCar.ino | ArduinoCar/ArduinoCar.ino | #include <PID_v1.h>
const int EA=9;
const int EB=10;
const int pinLa=7;
const int pinLb=8;
const int pinRa=12;
const int pinRb=13;
const int trigpin=4;
const int echopin=5;
double SetpointL=10, SetpointR=10;
double Kp=0.6, Ki=5, Kd=0;
double outputL, outputR;
double inputL, inputR, speedvalueL, speedvalueR;
bool Dire... | #include <PID_v1.h>
const int EA=9;
const int EB=10;
const int pinLa=7;
const int pinLb=8;
const int pinRa=12;
const int pinRb=13;
const int trigpin=4;
const int echopin=5;
double SetpointL=20, SetpointR=20;
double Kp=0.6, Ki=5, Kd=0;
double outputL, outputR;
double inputL, inputR, speedvalueL, speedvalueR;
bool Dire... | fix sth | fix sth
| Arduino | mit | lxgouc/Qt-tcp-opencv,lxgouc/Qt-tcp-opencv |
bea8f06fb082e28239ddf891f7987b20aa845a1f | jenny5-firmware/jenny5-firmware.ino | jenny5-firmware/jenny5-firmware.ino | #include <avr/pgmspace.h>
#include "ultrasonic_sensors_controller.h"
#include "potentiometers_controller.h"
#include "motors_control.h"
#include "button_controller.h"
#include "jenny5_types.h"
#include "infrared_sensors_controller.h"
byte potentiometers_pins[4] = {0, 1, 2, 3};
t_limit_pair potentiometer_limits[4] = {... | #include <avr/pgmspace.h>
#include "ultrasonic_sensors_controller.h"
#include "potentiometers_controller.h"
#include "motors_control.h"
#include "button_controller.h"
#include "jenny5_types.h"
#include "infrared_sensors_controller.h"
byte potentiometers_pins[4] = {0, 1, 2, 3};
t_limit_pair potentiometer_limits[4] = {... | return only T# in setup(); parse current_buffer from the end; V command for version | return only T# in setup(); parse current_buffer from the end; V command for version
- returning a complex string like "Jenny 5 firmware version" was wrong
because it contains letter m which can also mean a motor move event.
- we now parse the current_buffer from the end. This will help to
process strings faster becau... | Arduino | mit | ubbots/jenny5-firmware,jenny5-robot/jenny5-firmware,ubbots/jenny5-firmware,jenny5-robot/jenny5-firmware |
5f25f76a708df29e52ead582aeb9b67c8d360426 | arduino/rflink/rflink.ino | arduino/rflink/rflink.ino | #include <stdbool.h>
#include <stdint.h>
#include <string.h>
#include "radio.h"
#include "cmdproc.h"
#include "editline.h"
#include "hal.h"
#include "SPI.h"
#include "EEPROM.h"
// EEPROM address of node id
#define EE_ADDR_ID 0
static uint8_t id_read(void)
{
return EEPROM.read(EE_ADDR_ID);
}
static void id_wri... | #include <stdbool.h>
#include <stdint.h>
#include <string.h>
#include "radio.h"
#include "cmdproc.h"
#include "editline.h"
#include "hal.h"
#include "SPI.h"
#include "EEPROM.h"
// EEPROM address of node id
#define EE_ADDR_ID 0
static uint8_t id_read(void)
{
return EEPROM.read(EE_ADDR_ID);
}
static void id_wri... | Use strtoul instead of atoi to parse a long integer | Use strtoul instead of atoi to parse a long integer
| Arduino | mit | bertrik/rflink,bertrik/rflink |
09355980fd847528cfc848fd6741f0fe26b687c4 | IHM595/exemples/HelloWorld/HelloWorld.ino | IHM595/exemples/HelloWorld/HelloWorld.ino | /*
* Marcelo H Moraes
* marceloh220@hotmail.com
*
* Hello World!
* All the fancy is only for demonstration
*/
#include <IHM595.h>
uint8_t s,m,h;
uint64_t mil;
IHM595 board(2,3,4);
void setup() {
board.begin();
board.background(HIGH);
board.set(2,0);
String a = "Hello World!";
board.print(a);
}
void... | /*
* Marcelo H Moraes
* marceloh220@hotmail.com
*
* Hello World!
* All the fancy is only for demonstration
*/
#include <IHM595.h>
uint8_t s,m,h;
uint64_t mil;
IHM595 board(2,3,4);
void setup() {
board.background(HIGH);
board.set(2,0);
String a = "Hello World!";
board.print(a);
}
void loop() {
boa... | Update HelloWorld.ino | Update HelloWorld.ino | Arduino | mit | marceloh220/Arduino,marceloh220/Arduino |
37e30aaf2a2edf14d94fc3cb40aebf17d93dcb59 | Nokia_5110/Nokia_5110.ino | Nokia_5110/Nokia_5110.ino | #define RST 2
#define CE 3
#define DC 4
#define DIN 5
#define CLK 6
void startTransmission(){
digitalWrite(CE, LOW);
}
void endTransmission(){
digitalWrite(CE, HIGH);
}
void transmitInformation(byte information){
startTransmission();
shiftOut(DIN, CLK, MSBFIRST, information);
endTransmission();
}... | #define RST 2
#define CE 3
#define DC 4
#define DIN 5
#define CLK 6
void startTransmission(){
digitalWrite(CE, LOW);
}
void endTransmission(){
digitalWrite(CE, HIGH);
}
void transmitInformation(byte information){
startTransmission();
shiftOut(DIN, CLK, MSBFIRST, information);
endTransmission();
}... | make a function for easily specifying temperature coefficient | make a function for easily specifying temperature coefficient
| Arduino | mit | baghayi/Nokia_5110,baghayi/Nokia_5110 |
30ed133d11aea4a958d7c5118fa5d4873022ea90 | Programmer/Programmer.ino | Programmer/Programmer.ino | /*
Programmer.ino
Programmer for flashing Nordic nRF24LE1 SOC RF chips using SPI interface from an Arduino.
Data to write to flash is fed from standard SDCC produced Intel Hex format file using the
accompanying programmer.pl perl script. Start the Arduino script first and then run the
perl script.
When upload... | /*
Programmer.ino
Programmer for flashing Nordic nRF24LE1 SOC RF chips using SPI interface from an Arduino.
Data to write to flash is fed from standard SDCC produced Intel Hex format file using the
accompanying programmer.pl perl script. Start the Arduino script first and then run the
perl script.
When upload... | Switch 38400 baud for the serial | Switch 38400 baud for the serial
| Arduino | mit | baruch/nRF24LE1_Programmer |
0678d9d377782d7fd841180cb80e4d67fbc8b0db | Arduino/Thingamabot/Thingamabot.ino | Arduino/Thingamabot/Thingamabot.ino | // Arduino code for Thingamashop wheelchair robot.
//
// Accepts commands over serial or Bluetooth LE.
// Commands are two lower case letters, space, an integer value,
// then CR, LF.
//
// A fail-safe mode will shut down the robot if no commands
// are processed within a fail-safe interval. Once fail-safe mode
// is e... | // Arduino code for Thingamashop wheelchair robot.
//
// Accepts commands over serial or Bluetooth LE.
// Commands are two lower case letters, space, an integer value,
// then CR, LF.
//
// A fail-safe mode will shut down the robot if no commands
// are processed within a fail-safe interval. Once fail-safe mode
// is e... | Add code to receive Bluetooth commands via RedBearLabs Bluetooth LE shield. | Add code to receive Bluetooth commands via RedBearLabs Bluetooth LE shield.
| Arduino | mit | petergolde/wheelchair-robot,petergolde/wheelchair-robot,petergolde/wheelchair-robot,petergolde/wheelchair-robot |
0ef22f0b4284986742a5aac467ebb12854eed96d | arduino/edison2fiware.ino | arduino/edison2fiware.ino |
//################# LIBRARIES ################
#include <SPI.h>
#include <WiFi.h>
//################# WIFI DETAILS #################
char ssid[] = "OWDTEST"; // your network SSID (name)
char pass[] = "tidowd22"; // your network password (use for WPA, or use as key for WEP)
int keyIndex = ... |
//################# LIBRARIES ################
#include <SPI.h>
#include <WiFi.h>
//################# WIFI DETAILS #################
char ssid[] = ""; // your network SSID (name)
char pass[] = ""; // your network password (use for WPA, or use as key for WEP)
int keyIndex = 0; /... | Update edison2fiware.ino | Update edison2fiware.ino | Arduino | agpl-3.0 | telefonicaid/fiware-edison,telefonicaid/fiware-edison,telefonicaid/fiware-edison,telefonicaid/fiware-edison |
c5f7e08a5ca84443a9203184159adbb039958180 | src/_ota.ino | src/_ota.ino | /**
* Ai-Thinker RGBW Light Firmware - OTA Module
*
* The OTA (Over The Air) module holds all the code to manage over the air
* firmware updates.
*
* This file is part of the Ai-Thinker RGBW Light Firmware.
* For the full copyright and license information, please view the LICENSE
* file that was distributed wit... | /**
* Ai-Thinker RGBW Light Firmware - OTA Module
*
* The OTA (Over The Air) module holds all the code to manage over the air
* firmware updates.
*
* This file is part of the Ai-Thinker RGBW Light Firmware.
* For the full copyright and license information, please view the LICENSE
* file that was distributed wit... | Disable WebSocket clients upon OTA start. | Disable WebSocket clients upon OTA start.
| Arduino | mit | stelgenhof/AiLight,stelgenhof/AiLight,stelgenhof/AiLight,stelgenhof/AiLight,stelgenhof/AiLight |
251820c4305b5ecb0e31dd70311c79cd54ec26a1 | AM2320/example/AM2320lib_test.ino | AM2320/example/AM2320lib_test.ino | #include <Wire.h>
#include <AM2320.h>
AM2320 th;
void setup() {
Serial.begin(9600);
}
void loop() {
Serial.println("---------------");
Serial.print("humidity: ");
Serial.print(th.getHumidity());
Serial.print("%");
Serial.print("|| temperature: ");
Serial.print(th.getTemperature());
Serial.println("*... | #include <Wire.h>
#include <AM2320.h>
AM2320 th;
void setup() {
Serial.begin(9600);
}
void loop() {
switch(th.Read()) {
case 2:
Serial.println("CRC failed");
break;
case 1:
Serial.println("Sensor offline");
break;
case 0:
Serial.print("humidity: ");
Serial.print(th.... | Update AM2320lib_test.ino | Update AM2320lib_test.ino | Arduino | mit | thakshak/AM2320 |
530bc8e41ce2215f84765a2326625137eee8a3d1 | mk_0/mk_0.ino | mk_0/mk_0.ino | #include <stdint.h>
#include "doom.h"
#define MAINLOOP_PERIOD_TICKS 6249
#define MISSION_TIMEOUT 3200
statevars_t statevars;
uint32_t iterations;
volatile uint8_t system_timer_overflow = 0;
ISR(TIMER1_OVF_vect) {
system_timer_overflow = 1;
}
void setup() {
if (init_all_subsystems()) {
Serial.pr... | #include <stdint.h>
#include "doom.h"
#define MAINLOOP_PERIOD_TICKS 6249
#define MISSION_TIMEOUT 200
statevars_t statevars;
uint32_t iterations;
volatile uint8_t system_timer_overflow = 0;
ISR(TIMER1_OVF_vect) {
system_timer_overflow = 1;
}
void setup() {
if (init_all_subsystems()) {
Serial.pri... | Reduce mission timeout to 5 seconds | Reduce mission timeout to 5 seconds
| Arduino | mit | mr-augustine/doctor_doom,mr-augustine/doctor_doom |
f61a709b8d02e473795bc65dc784ed27615e6efc | microcoap.ino | microcoap.ino | /*
* WARNING - UDP_TX_PACKET_MAX_SIZE is hardcoded by Arduino to 24 bytes
* This limits the size of possible outbound UDP packets
*/
#include <avr/wdt.h>
#include <SPI.h>
#include <Ethernet.h>
#include <stdint.h>
#include <EthernetUdp.h>
//#define UDP_TX_PACKET_MAX_SIZE 256
#include <utility/util.h>
#include "coap.... | /*
* WARNING - UDP_TX_PACKET_MAX_SIZE is hardcoded by Arduino to 24 bytes
* This limits the size of possible outbound UDP packets
*/
#include <avr/wdt.h>
#include <SPI.h>
#include <Ethernet.h>
#include <stdint.h>
#include <EthernetUdp.h>
//#define UDP_TX_PACKET_MAX_SIZE 256
#include <utility/util.h>
#include "coap.... | Connect to smart-connected.us | Connect to smart-connected.us
| Arduino | mit | mbialon/microcoap,smart-connected/microcoap |
150c703f023264ea1835d7c3d993ffeea7fd2846 | mech/mech.ino | mech/mech.ino | // Motor 1 = Ch1 = set 1 = Stepper 1 = "L" Motor
// Motor 2 = Ch2 = set 2 = Stepper 2 = "C1" Motor "Cold"
// Motor 3 = Ch3 = set 3 = Stepper 3 = "C2 Motor "Hot"
// Motor C: 200 steps 360 degrees revolution (no gear). In quater-step mode 800 steps 360 degrees revolution (no gear).
// Measured 2964 steps 360 degrees rev... | // Motor 1 = Ch1 = set 1 = Stepper 1 = "L" Motor
// Motor 2 = Ch2 = set 2 = Stepper 2 = "C1" Motor "Cold"
// Motor 3 = Ch3 = set 3 = Stepper 3 = "C2 Motor "Hot"
// Motor C: 200 steps 360 degrees revolution (no gear). In quater-step mode 800 steps 360 degrees revolution (no gear).
// Measured 2964 steps 360 degrees rev... | Update mech.ino | Update mech.ino | Arduino | mit | dkaukov/ratu,dkaukov/ratu |
23ca13d75bba813ba851d6d6a3532a91f6132505 | examples-ltc/6.LTCVolume1/Test1/Test1.ino | examples-ltc/6.LTCVolume1/Test1/Test1.ino | // Love to Code
// Volume 1 syntax demo
// The simplest possible blink example is shown here using the LTC API.
loop() {
on(0);
pause(1000);
off(0);
pause(1000);
}
| // Love to Code
// Volume 1 syntax demo
// The simplest possible blink example is shown here using the LTC API.
setup() {
outputMode(0);
}
loop() {
on(0);
pause(1000);
off(0);
pause(1000);
}
| add setup() to the basic-est example | add setup() to the basic-est example
| Arduino | mit | chibitronics/ltc-webview-layer,chibitronics/ltc-webview-layer,chibitronics/ltc-webview-layer,chibitronics/ltc-webview-layer |
bfa73b394fcddb956d706d72f963b4be6c5397ad | arduino/Master/Master.ino | arduino/Master/Master.ino | #include <RF24Network.h>
#include <RF24.h>
#include <RF24Mesh.h>
#include <Ethernet.h>
#include <SPI.h>
#include <EEPROM.h>
#include <ArduinoJson.h>
#include <stdlib.h>
RF24 radio(7, 8);
RF24Network network(radio);
RF24Mesh mesh(radio, network);
const float MIN_P = 1.5;
const byte CURRENTCOUNT = 2;
boolean DEBUG = t... | #include <RF24Network.h>
#include <RF24.h>
#include <RF24Mesh.h>
#include <Ethernet.h>
#include <SPI.h>
#include <EEPROM.h>
#include <ArduinoJson.h>
#include <stdlib.h>
RF24 radio(49, 53);
RF24Network network(radio);
RF24Mesh mesh(radio, network);
const float MIN_P = 1.5;
const byte CURRENTCOUNT = 2;
boolean DEBUG =... | Change mater RF Pins | Change mater RF Pins
| Arduino | mit | ndkimhao/EnergyMesh,ndkimhao/EnergyMesh |
75c16a730142a0ce84d27395ef55dd2d17290f16 | OpenStage/openStage_moveToTarget.ino | OpenStage/openStage_moveToTarget.ino |
//------------------------------------------------------------------------------------------------
// * moveToTarget
// This function is responsible for moving the stage to an absolute location. It takes two
// inputs: an array of floats defining how much to move the stage in each axis and the step size.
// The leng... |
//------------------------------------------------------------------------------------------------
// * moveToTarget
// This function is responsible for moving the stage to an absolute location. It takes two
// inputs: an array of floats defining how much to move the stage in each axis and the step size.
// The leng... | Convert runSteppersToPos() to work with a variable number of axes. It's vitally important that this function works correctly. | Convert runSteppersToPos() to work with a variable number of axes. It's vitally important that this function works correctly.
| Arduino | agpl-3.0 | raacampbell13/openstage,raacampbell13/openstage |
e444947d4b99577db84d4072df7990f293adb7ef | firmware/examples/01_Particle/01_Particle.ino | firmware/examples/01_Particle/01_Particle.ino | /**************************************************************
* Blynk is a platform with iOS and Android apps to control
* Arduino, Raspberry Pi and the likes over the Internet.
* You can easily build graphic interfaces for all your
* projects by simply dragging and dropping widgets.
*
* Downloads, docs, tuto... | /**************************************************************
* Blynk is a platform with iOS and Android apps to control
* Arduino, Raspberry Pi and the likes over the Internet.
* You can easily build graphic interfaces for all your
* projects by simply dragging and dropping widgets.
*
* Downloads, docs, tuto... | Update 01_Particle.ino | Update 01_Particle.ino | Arduino | mit | JFLegros/RedBear_Duo,JFLegros/RedBear_Duo |
5a642c485eface5ff32c3374b9f2f65596c49786 | examples/ColorPalette/ColorPalette.ino | examples/ColorPalette/ColorPalette.ino | #include <FastLED.h>
#define LED_PIN 5
#define NUM_LEDS 50
#define BRIGHTNESS 64
#define LED_TYPE WS2811
#define COLOR_ORDER GRB
CRGB leds[NUM_LEDS];
#define UPDATES_PER_SECOND 100
// This example shows several ways to set up and use 'palettes' of colors
// with FastLED.
//
// These compact palettes provi... | #include <FastLED.h>
#define LED_PIN 5
#define NUM_LEDS 50
#define BRIGHTNESS 64
#define LED_TYPE WS2811
#define COLOR_ORDER GRB
CRGB leds[NUM_LEDS];
#define UPDATES_PER_SECOND 100
// This example shows several ways to set up and use 'palettes' of colors
// with FastLED.
//
// These compact palettes provi... | Fix typo in example | Fix typo in example | Arduino | mit | FastLED/FastLED,PaulStoffregen/FastLED,PaulStoffregen/FastLED,PaulStoffregen/FastLED,FastLED/FastLED,FastLED/FastLED,FastLED/FastLED |
0fabcdbe8600fedd5f617595b3baa275ed861596 | examples/Sandbox/CosaTone/CosaTone.ino | examples/Sandbox/CosaTone/CosaTone.ino | /**
* @file CosaTone.ino
* @version 1.0
*
* @section License
* Copyright (C) 2014, Mikael Patel
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the Lic... | /**
* @file CosaTone.ino
* @version 1.0
*
* @section License
* Copyright (C) 2014, Mikael Patel
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the Lic... | Add simple pause in tone play. | Add simple pause in tone play.
| Arduino | lgpl-2.1 | jeditekunum/Cosa,dansut/Cosa,rrobinet/Cosa,jeditekunum/Cosa,jeditekunum/Cosa,kc9jud/Cosa,rrobinet/Cosa,dansut/Cosa,kc9jud/Cosa,dansut/Cosa,rrobinet/Cosa,mikaelpatel/Cosa,kc9jud/Cosa,mikaelpatel/Cosa,rrobinet/Cosa,jeditekunum/Cosa,dansut/Cosa,mikaelpatel/Cosa,mikaelpatel/Cosa,kc9jud/Cosa |
6874f538d8ac9fa2350b079e713fcbd9d83ab770 | FastLED/Beacon.ino | FastLED/Beacon.ino | #include "captouch.h"
#include "FastLED.h"
#define RING_PIN 3
#define RING_LEDS 64
CRGB ringLeds[RING_LEDS];
#define STRIP_PIN 3
#define STRIP_LEDS 64
CRGB stripLeds[STRIP_LEDS];
CRGB red = CHSV( 0, 0, 0);
CRGB green = CHSV( 85, 0, 0);
CRGB blue = CHSV( 150, 0, 0);
CRGB beaconColor = CHSV( 0, 0, 0);
CR... | #include "captouch.h"
#include "FastLED.h"
#define RING_PIN 3
#define RING_LEDS 64
CRGB ringLeds[RING_LEDS];
#define STRIP_PIN 3
#define STRIP_LEDS 64
CRGB stripLeds[STRIP_LEDS];
CRGB red = CHSV( 0, 0, 0);
CRGB green = CHSV( 85, 0, 0);
CRGB blue = CHSV( 150, 0, 0);
CRGB beaconColor = CHSV( 0, 0, 0);
CR... | Update Beacon.ino | Update Beacon.ino | Arduino | apache-2.0 | Blaze420McYoloSwag/LiteHaus |
f291105c6087977a51e6fc78bcaebef6f0c04f4d | FretBoard/FretBoard.ino | FretBoard/FretBoard.ino | /*
FretBoard
Retrieve continuous integration server status from the net and visualise status with a
ws2811-based programmable LED array.
For info and circuit diagrams see https://github.com/tardate/LittleArduinoProjects/tree/master/FretBoard
*/
#include <SPI.h>
#include <Ethernet.h>
#include <TextFinder.h... | /*
FretBoard
Retrieve continuous integration server status from the net and visualise status with a
ws2811-based programmable LED array.
For info and circuit diagrams see https://github.com/tardate/LittleArduinoProjects/tree/master/FretBoard
*/
#include <SPI.h>
#include <Ethernet.h>
#include <TextFinder.h... | add support for Unknown activity status | [FretBoard] add support for Unknown activity status | Arduino | mit | tardate/LittleArduinoProjects,tardate/LittleArduinoProjects,tardate/LittleArduinoProjects,tardate/LittleArduinoProjects,tardate/LittleArduinoProjects,tardate/LittleArduinoProjects,tardate/LittleArduinoProjects,tardate/LittleArduinoProjects |
739fae0baf2125e08aa8cbc4785cf45a11dbb37f | wifitask.ino | wifitask.ino | void wifiTask( void * pvParameters ) {
/* trying last accesspoint */
//WiFi.onEvent( WiFiEvent );
WiFi.mode( WIFI_STA );
WiFi.setSleep( false );
if ( wifi_network != "" ) WiFi.begin( wifi_network, wifi_password );
else WiFi.begin();
ESP_LOGI( TAG, "Connecting WiFi" );
if ( xTftTaskHandle ) {
tft.s... | void wifiTask( void * pvParameters ) {
/* trying last accesspoint */
WiFi.mode( WIFI_STA );
WiFi.setSleep( false );
if ( wifi_network != "" ) WiFi.begin( wifi_network, wifi_password );
else WiFi.begin();
if ( xTftTaskHandle ) {
tft.setTextColor( TFT_TEXT_COLOR , TFT_BACK_COLOR );
tft.println( "Con... | Set a reconnect handler for when WiFi looses connection. | Set a reconnect handler for when WiFi looses connection.
Better logic in smartConfig code.
Delete wifiTask when done.
| Arduino | mit | CelliesProjects/aquacontrol32,CelliesProjects/aquacontrol32,CelliesProjects/aquacontrol32,CelliesProjects/aquacontrol32 |
ed2d4238a8332a1297d30e03059a929cb80e08f3 | examples/OWI/CosaDS18B20alarm/CosaDS18B20alarm.ino | examples/OWI/CosaDS18B20alarm/CosaDS18B20alarm.ino | /**
* @file CosaDS18B20alarm.ino
* @version 1.0
*
* @section License
* Copyright (C) 2012-2013, Mikael Patel
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2... | /**
* @file CosaDS18B20alarm.ino
* @version 1.0
*
* @section License
* Copyright (C) 2012-2013, Mikael Patel
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2... | Adjust alarm thresholds to give a more realistic example sketch. | Adjust alarm thresholds to give a more realistic example sketch.
| Arduino | lgpl-2.1 | dansut/Cosa,SinishaDjukic/Meshwork,dansut/Cosa,mikaelpatel/Cosa,kc9jud/Cosa,jeditekunum/Cosa,SinishaDjukic/Meshwork,jeditekunum/Cosa,mikaelpatel/Cosa,SinishaDjukic/Meshwork,jeditekunum/Cosa,dansut/Cosa,kc9jud/Cosa,kc9jud/Cosa,mikaelpatel/Cosa,rrobinet/Cosa,jeditekunum/Cosa,dansut/Cosa,rrobinet/Cosa,SinishaDjukic/Meshwo... |
666d32d5a741515a22af79bf15c4c09c376c6a1a | examples/04-FrequencyDomain/LowpassFilter_FD/LowpassFilter_FD.ino | examples/04-FrequencyDomain/LowpassFilter_FD/LowpassFilter_FD.ino | // FrequencyDomainDemo1
//
// Demonstrate audio procesing in the frequency domain.
//
// Created: Chip Audette Sept-Oct 2016
//
// Approach:
// * Take samples in the time domain
// * Take FFT to convert to frequency domain
// * Manipulate the frequency bins as desired (LP filter? BP filter? Formant shift?)
... | // LowpassFilter_FD
//
// Demonstrate audio procesing in the frequency domain through the use of a very simple
// lowpass filter.
//
// Created: Chip Audette, Initial 2017
//
// Approach:
// * Take samples in the time domain
// * Take FFT to convert to frequency domain
// * Manipulate the frequency bins as des... | improve comments update to myTympan | LowpassFilter_FD: improve comments update to myTympan | Arduino | mit | Tympan/Tympan_Library,Tympan/Tympan_Library,Tympan/Tympan_Library |
8f785918eca5f79959190fe16b48c0c82854245e | PushStart.ino | PushStart.ino | /*
Push Start
Arduino-based Keyless Ignition
for 97-01 Toyota Camry (XV20)
Designed by Kevin Abraham
*/
#include <AnalogTouch.h>
#define DEBUG 0
#define BUTTON_PRESS_THRESHOLD 500
#define pinACC 2
#define pinIG1 4
#define pinIG2 7
#define pinST2 8
#define pinCap A4
#define pinLed 10
// Slo... | /*
Push Start
Arduino-based Keyless Ignition
for 97-01 Toyota Camry (XV20)
Designed by Kevin Abraham
*/
#include <AnalogTouch.h>
#define DEBUG 0
#define BUTTON_PRESS_THRESHOLD 500
#define pinACC 2
#define pinIG1 4
#define pinIG2 7
#define pinST2 8
#define pinCap A5
#define pinLed 10
// Slo... | Save state | Save state
| Arduino | mit | abraha2d/PushStart |
07345b4bbf3544d2603f0035496e679053b03d21 | roto2.ino | roto2.ino | // Copyright (c) 2015 Peter Teichman
#include <Audio.h>
#include <Wire.h>
#include <SPI.h>
#include <SD.h>
#include <SerialFlash.h>
#include "drawbar_osc.h"
#include "vibrato.h"
#include "voice_allocator.h"
// GUItool: begin automatically generated code
DrawbarOsc osc1;
DrawbarOsc osc2;
D... | // Copyright (c) 2015 Peter Teichman
#include <Audio.h>
#include <Wire.h>
#include <SPI.h>
#include <SD.h>
#include <SerialFlash.h>
#include "drawbar_osc.h"
#include "vibrato.h"
#include "voice_allocator.h"
// GUItool: begin automatically generated code
DrawbarOsc osc1;
DrawbarOsc osc2;
D... | Make drawbar constants explicit longs for readability | Make drawbar constants explicit longs for readability
| Arduino | mit | pteichman/roto2 |
44cd7e505e59644a3fca7303b316293372580f9f | libraries/CurieBle/examples/BatteryMonitor/BatteryMonitor.ino | libraries/CurieBle/examples/BatteryMonitor/BatteryMonitor.ino | /*
Copyright (c) 2015 Intel Corporation. All rights reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later v... | /*
Copyright (c) 2015 Intel Corporation. All rights reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later v... | Update note on local name | Update note on local name
| Arduino | lgpl-2.1 | linrjing/corelibs-arduino101,yashaswini-hanji/corelibs-arduino101,bigdinotech/corelibs-arduino101,sgbihu/corelibs-arduino101,SidLeung/corelibs-arduino101,sandeepmistry/corelibs-arduino101,facchinm/corelibs-arduino101,sgbihu/corelibs-arduino101,facchinm/corelibs-arduino101,SidLeung/corelibs-arduino101,01org/corelibs-ard... |
a61fa2976225b67424ab53e6ebcc5eee1134241e | tpsu1.ino | tpsu1.ino | #include <SPI.h>
#include <EEPROM.h>
#include <DAC_MCP49xx.h>
#define DAC_P 9
#define OE_P 8
#define DAC_N 7
#define OE_N 6
#define ITE 5
#define AC_1 10
#define AC_2 12
#define AC_3 4
#define AC_4 3
#define Vsense_P 0
#define Vsense_N 1
#define Asense_P 2
#define Asense_N 3
int setVP = 0;
int setAP = 0;
int setVN ... | #include <SPI.h>
#include <EEPROM.h>
#include <DAC_MCP49xx.h>
#define DAC_P 9
#define OE_P 8
#define DAC_N 7
#define OE_N 6
#define ITE 5
#define AC_1 10
#define AC_2 12
#define AC_3 4
#define AC_4 3
#define Vsense_P 0
#define Vsense_N 1
#define Asense_P 2
#define Asense_N 3
int setVP = 0;
int setAP = 0;
int setVN ... | Add some voltage feedback loop | Add some voltage feedback loop
| Arduino | mit | calston/piwerlab,calston/piwerlab |
753c9b9a996cb4326e64f7d5c6b1e232fee21cf6 | Arduino/LightPlayer/LightPlayer.ino | Arduino/LightPlayer/LightPlayer.ino | #include <SPI.h>
#include <SdFat.h>
#include <FAB_LED.h>
#define DEBUG
// ports used:
// digital 4 - SD card chip select
// digital 6 - strip of 200 APA106 LEDs
// digital 11 - SPI (SD card DI)
// digital 12 - SPI (SD card DO)
// digital 13 - SPI (SD card CLK)
// analog 0 - RF remote button D
// analog 1 - RF remote ... | #include <SPI.h>
#include <SdFat.h>
#include <FAB_LED.h>
#define DEBUG
// ports used:
// digital 4 - SD card chip select
// digital 6 - strip of 200 APA106 LEDs
// digital 11 - SPI (SD card DI)
// digital 12 - SPI (SD card DO)
// digital 13 - SPI (SD card CLK)
// analog 0 - RF remote button D
// analog 1 - RF remote ... | Support changing frame rate on the fly | Support changing frame rate on the fly
Currently, we can vary between 150ms per frame (3x slower than normal,
6.67 FPS) and 25ms per frame (2x faster than normal, 40 FPS). Though,
the work being done in adjustFrameColors() takes so long that our
fastest speed is more like 27 FPS than the 40 it would be on a faster
pr... | Arduino | mit | MaddAddaM/LightRender,godlygeek/LightRender |
55797297bee794dfc7fa85c766550b5fc15a92e1 | wifitask.ino | wifitask.ino | void wifiTask( void * pvParameters ) {
/* trying last accesspoint */
WiFi.mode( WIFI_STA );
WiFi.begin();
//WiFi.onEvent( WiFiEvent );
ESP_LOGI( TAG, "Connecting WiFi" );
if ( xTftTaskHandle ) {
tft.setTextColor( TFT_TEXT_COLOR , TFT_BACK_COLOR );
tft.println( "Connecting WiFi");
}
WiFi.waitF... | void wifiTask( void * pvParameters ) {
/* trying last accesspoint */
WiFi.mode( WIFI_STA );
WiFi.setSleep( false );
WiFi.begin();
//WiFi.onEvent( WiFiEvent );
ESP_LOGI( TAG, "Connecting WiFi" );
if ( xTftTaskHandle ) {
tft.setTextColor( TFT_TEXT_COLOR , TFT_BACK_COLOR );
tft.println( "Connecting... | Speed up WiFi considerably. | Speed up WiFi considerably.
See https://github.com/me-no-dev/ESPAsyncWebServer/issues/622
| Arduino | mit | CelliesProjects/aquacontrol32,CelliesProjects/aquacontrol32,CelliesProjects/aquacontrol32,CelliesProjects/aquacontrol32 |
a46e56090b7552232f0663958857a000c17b5de7 | examples/Ports/lcd_demo/lcd_demo.ino | examples/Ports/lcd_demo/lcd_demo.ino | // Demo sketch for an LCD connected to I2C port via MCP23008 I/O expander
// 2009-10-31 <jc@wippler.nl> http://opensource.org/licenses/mit-license.php
#include <JeeLib.h>
PortI2C myI2C (1);
LiquidCrystalI2C lcd (myI2C);
void setup() {
// set up the LCD's number of rows and columns:
lcd.begin(16, 2);
// Print ... | // Demo sketch for an LCD connected to I2C port via MCP23008 I/O expander
// 2009-10-31 <jc@wippler.nl> http://opensource.org/licenses/mit-license.php
#include <PortsLCD.h>
PortI2C myI2C (1);
LiquidCrystalI2C lcd (myI2C);
void setup() {
// set up the LCD's number of rows and columns:
lcd.begin(16, 2);
// Prin... | fix incorrect include | fix incorrect include
| Arduino | unlicense | jcw/jeelib,jcw/jeelib |
4cae7f22eedd5ff07d0ac6f67a4cd24ffb260d0a | examples/Face/ENCODER/ENCODER.ino | examples/Face/ENCODER/ENCODER.ino | #include <M5Stack.h>
#define Faces_Encoder_I2C_ADDR 0X5E
int encoder_increment;//positive: clockwise nagtive: anti-clockwise
int encoder_value=0;
uint8_t direction;//0: clockwise 1: anti-clockwise
uint8_t last_button, cur_button;
void GetValue(void){
int temp_encoder_increment;
Wire.requestFrom(Faces_En... | #include <M5Stack.h>
#define Faces_Encoder_I2C_ADDR 0X5E
int encoder_increment;//positive: clockwise nagtive: anti-clockwise
int encoder_value=0;
uint8_t direction;//0: clockwise 1: anti-clockwise
uint8_t last_button, cur_button;
void GetValue(void){
int temp_encoder_increment;
Wire.requestFrom(Faces_En... | Update ENCODER.ino | Update ENCODER.ino | Arduino | mit | m5stack/M5Stack,m5stack/M5Stack,m5stack/M5Stack |
dd742f7689acc6856f26c946a332a7ee1ff75b7b | arduino_pico/arduino_pico.ino | arduino_pico/arduino_pico.ino | #include "OneWire.h"
#include "DallasTemperature.h"
#include "TimerOne.h"
#include "SPI.h"
#include "Ethernet.h"
#include "WebServer.h"
#include "typedefs.h"
#include "mapping.h"
/*
* Thermometer
*/
#define TEMPERATURE_PRECISION 12
// Setup a oneWire instance to communicate with any OneWire devices (not just Max... | #include "OneWire.h"
#include "DallasTemperature.h"
#include "TimerOne.h"
#include "SPI.h"
#include "Ethernet.h"
#include "WebServer.h"
#include "typedefs.h"
#include "mapping.h"
/*
* Thermometer
*/
#define TEMPERATURE_PRECISION 12
// Setup a oneWire instance to communicate with any OneWire devices (not just Max... | fix initialisation | fix initialisation
| Arduino | apache-2.0 | flagos/arduino-pico,flagos/arduino-pico |
84fe36139c5320eb0cd1d3d0e3b1f3a50e8d7f19 | examples/UbidotsGetValue/UbidotsGetValue.ino | examples/UbidotsGetValue/UbidotsGetValue.ino | // This example retrieves last value of a variable from the Ubidots API
// using TCP protocol.
/****************************************
* Include Libraries
****************************************/
#include <Ubidots.h>
/****************************************
* Define Constants
*********************************... | // This example retrieves last value of a variable from the Ubidots API
// using TCP protocol.
/****************************************
* Include Libraries
****************************************/
#include <Ubidots.h>
/****************************************
* Define Constants
*********************************... | Debug to True | Debug to True | Arduino | mit | ubidots/ubidots-arduino-gprs,ubidots/ubidots-arduino-gprs |
865cbeb5cdb60a74da58768913fb10cb452938c8 | Pingduino/Pingduino.ino | Pingduino/Pingduino.ino | #include "Game.h"
#include "Display.h"
#include "WaveUtil.h"
#include "WaveHC.h"
#define P1PIN 0 // Interrupts
#define P2PIN 1
#define BUTTONLIGHTPIN 4
#define LONGPRESS_TIME 1000
#define INACTIVEMILLIS 1200000 // 20 minutes
// Game Logics
volatile int p1Score = 0;
volatile int p2Score = 0;
vol... | #include "Game.h"
#include "Display.h"
#include "WaveUtil.h"
#include "WaveHC.h"
#define P1PIN 0 // Interrupts
#define P2PIN 1
#define BUTTONLIGHTPIN 4
#define LONGPRESS_TIME 1000
#define INACTIVEMILLIS 1200000 // 20 minutes
// Game Logics
volatile int p1Score = 0;
volatile int p2Score = 0;
vol... | Remove unused cruft | Remove unused cruft
| Arduino | mit | rubyist/pingduino,rubyist/pingduino |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.