data stringlengths 14 24.3k |
|---|
Rave#7710: From a quick google it seems that bios modding is the way to go
TheFalseCube#0296: I could totally be wrong though
Rave#7710: So i'd try that before potentially shorting out the wrong resistors
TheFalseCube#0296: Ok, I'll give that a shot. Thanks!
Niobium#6334: @TheFalseCube Those definitely are not shunt re... |
Rave#7710: On the rx 480 strix
Frito#0907: My 780 ti is like that
Rave#7710: Ok wtf
Rave#7710: That was with gpuz render test
Rave#7710: It's 1.45v while running vantage
Rave#7710: Ok whoops I forgot I turned LLC off with vrmtool, it's still at 1.41v though
buildzoid#6254: X99 puts can't keep up with the V56 so bad tha... |
buildzoid#6254: honestly I though it might scale past 1.35V
buildzoid#6254: since it scales from 1.25 to 1.35
buildzoid#6254: but I guess it gets to warm internally once you go past 1.35V
buildzoid#6254: might need more VCCSA or Vpp.....
∫ntegral#0450: hmm
1.25v vddc, 1.050v vddci
1200MHz core will crash heaven
1150mhz... |
Igloo#2464: I don't mean to be a bother
Igloo#2464: https://i.imgur.com/xln7eyO.png
Mickulty#1560: max power limit, move core up in small steps until it crashes, then move voltage up until it doesn;t, repeat until you run out of volts or start getting too hot
Mickulty#1560: then move memory up in small steps and run a ... |
Igloo#2464: is that were I would change my gpu stuff or
Niobium#6334: @Igloo GPU overclocking is done from the OS, not the BIOS.
Igloo#2464: oh my bad
Igloo#2464: what program should I use to overclock
Niobium#6334: You'll need to download something.
Niobium#6334: I'd recommend MSI Afterburner.
Igloo#2464: ok, download... |
Igloo#2464: @Niobium
Igloo#2464: https://cdn.discordapp.com/attachments/305981966292090881/371111700579221514/unknown.png
Niobium#6334: There we go. I was wondering why it looked so wonky.
Igloo#2464: tbh I like the first UI more but I guess it's not showing the right things
Igloo#2464: ok so power limit and temp are... |
Igloo#2464: how to I check stability?
Niobium#6334: Do you have any benchmarks installed?(e.g. Valley, Heaven, etc.?)
Igloo#2464: I have realbench
Igloo#2464: otherwise I don't have those two no
Niobium#6334: That's not a great stress test for a GPU.
Igloo#2464: I see
Igloo#2464: I will download valley then
Igloo#2464:... |
Niobium#6334: I'd download that too, it'll be helpful.
Igloo#2464: ok, will do
Igloo#2464: @Niobium
Igloo#2464: this one?
Igloo#2464: https://www.techpowerup.com/download/techpowerup-gpu-z/
Niobium#6334: Yep
Igloo#2464: I should have the memory clock and core clock set on a profile right
Niobium#6334: I wouldn't bother... |
Igloo#2464: Preset Extreme?
Igloo#2464: Ok
Igloo#2464: Should I put the preset to Extreme for heaven?
Niobium#6334: It doesn't really matter, you can use the default settings.
Niobium#6334: Just keep an eye on GPU load in GPU-Z and make sure it's near 100% most of the time. Otherwise, you aren't stressing the GPU enou... |
Niobium#6334: Click on the settings button and check the "Unlock voltage control' box
Niobium#6334: Then you should be able to max out the voltage slider. It won't make a huge difference, but it might help slightly.
Igloo#2464: https://cdn.discordapp.com/attachments/305981966292090881/371116733609803777/unknown.png
I... |
Igloo#2464: Atm
Niobium#6334: Stable, or is it bouncing up and down slightly?
Igloo#2464: Stable
Igloo#2464: Solid red bar
Igloo#2464: Oop
Igloo#2464: Ooooop
Niobium#6334: Crash?
Igloo#2464: A bit of a stutter in one part
Igloo#2464: Other wise nothing
Niobium#6334: I wouldn't worry about that, most likely isn't the GP... |
Frito#0907: mem should probably get near 6000
Frito#0907: but i'd tune one or the other not both till ya know
Niobium#6334: It's a 1080 Frito
Niobium#6334: 10Gbps mem, not 11
Frito#0907: mem clock that much worse ah k
Igloo#2464: should I keep the benchmark running while going up in inacrements
Niobium#6334: You can if... |
Niobium#6334: Either it's got a stock mem OC, or it's got 11Gbps memory.
Igloo#2464: seems that it was thrown out from moving
Igloo#2464: the box
Niobium#6334: Because you shouldn't be hitting those memory clocks with 350 offset from stock
Igloo#2464: should I just increase the mem clock by 25?
Niobium#6334: Can you po... |
Igloo#2464: do you suggest I put them both up or just clock for now
Igloo#2464: or just mem
Niobium#6334: Leave the memory where it is and do one at a time.
Igloo#2464: ok
Niobium#6334: Doesn't matter if you do core or mem first.
Frito#0907: 😃 looked like it cuz looked like 1080 ti mems at 350
Igloo#2464: I will incre... |
Igloo#2464: https://i.imgur.com/dzqHGQc.png
Igloo#2464: https://cdn.discordapp.com/attachments/305981966292090881/371119928520212491/unknown.png
Frito#0907: try 145
Niobium#6334: ^^
Niobium#6334: Pascal clocks jump in 12MHz increments, sounds like your card can't do 2100, but it can do 2088.
Niobium#6334: I have a fee... |
Igloo#2464: https://cdn.discordapp.com/attachments/305981966292090881/371120450333310978/unknown.png
Frito#0907: i mean i think i have before but more often than not its app crash
Niobium#6334: Agree with Frito, it's a bit strange. I'd bring it back down to 130 though.
Igloo#2464: ok
Niobium#6334: Then start pushing ... |
Niobium#6334: I *did* have an air cooled 1080 for a year Frito 😉
Igloo#2464: everything seems to be working now
Frito#0907: hehe kk
Frito#0907: just know that air cooled cards can be quite finicky when nearing maxes
Niobium#6334: tbh Pascal in general is kind of finicky
Igloo#2464: I will aim for a water cooled gpu ne... |
Igloo#2464: ok, I will increase mem then
Niobium#6334: Try pushing it to 425. See if it gets really bad, or if it doesn't change much.
Igloo#2464: ok
Igloo#2464: everything is stable @Niobium
Igloo#2464: at these settings so far
Igloo#2464: https://cdn.discordapp.com/attachments/305981966292090881/371122689299185667/... |
Igloo#2464: at 525
Igloo#2464: very rare
Niobium#6334: Keep going, see if it keeps happening.
Igloo#2464: ok
Igloo#2464: brought it up from 525 to 575
Igloo#2464: It paused for a good 3 seconds before returning to normal
Igloo#2464: it paused again
Igloo#2464: could be a crash
Igloo#2464: yup it crashed
Igloo#2464: wel... |
Niobium#6334: It's running stably?
Igloo#2464: I only get black dots in one scene
Igloo#2464: other wise seems to be stable?
Niobium#6334: Are you sure they aren't part of the bench?
Igloo#2464: right now typing is slow in discord
Igloo#2464: I am pretty sure they aren't
Niobium#6334: I would keep pushing the memory un... |
Igloo#2464: yup
Igloo#2464: it's very small
Igloo#2464: I am bumping it up to 650
Igloo#2464: @Niobium computer crashed haha
Niobium#6334: heh, that's probably not the GPU.
Igloo#2464: gpu fans went up to 100% then everything shut off
Igloo#2464: the gpu started to flash white
Igloo#2464: as it useally does when the wh... |
Niobium#6334: Yep
Igloo#2464: so do I just keep my mem at 650 even with the whole pc crashing or should I lower it by 25
Niobium#6334: If the mem is what crashed it, I would lower it by 75-100MHz.
Niobium#6334: It's a bit hard to explain, but basically, the highest "stable" memory clock won't actually perform the best.... |
Igloo#2464: I core clocked my gpu to +130 and I am seeing red spots in shading falshing ever so often in PUBG
Igloo#2464: until I lower it all the way to 110
∫ntegral#0450: yeah that's a sign that your overclock is too aggressive
yosarianilives#1841: Yep, artifcting
Igloo#2464: strange. because it wasn't artifcting in ... |
Igloo#2464: thanks!
Stephen#8988: I've had no luck with my 1080ti's
Stephen#8988: none of them hit 2100 😢
Stephen#8988: gone through a SC2, FTW3, FTW3 Hybrid but the hybrid gets a stable 2050 so I'll take it :\
Frito#0907: cooling is key
Frito#0907: i have a founders edition
Frito#0907: stock yeah maybe 2050
Frito#090... |
Rave#7710: Power limit maxed out?
Deleted User#0000: nope at +50%
Rave#7710: Weird, what games specifically does it happen in?
Deleted User#0000: it's quite frequent in FFXIV, infrequent in Witcher 3
Deleted User#0000: haven't noticed it in DX HR
yosarianilives#1841: Could it be a cpu thing?
Deleted User#0000: how so?
... |
Deleted User#0000: ffs
Deleted User#0000: my heart skipped a beat there
yosarianilives#1841: Just cause something is multithreaded doesn't mean that there isn't something loads a thread a bunch
Rave#7710: If you force the card to run P7, will the LEDs still bounce around?
Deleted User#0000: how do you force it to run P... |
Deleted User#0000: https://cdn.discordapp.com/attachments/305981966292090881/371713135750676500/unknown.png
Deleted User#0000: and those are teh clocks
Rave#7710: Hmm, I'm really not sure then, I think it might be possible to power throttle at 50% with the liquid bios and 1.25v so I thought it could've been that.
Dele... |
Rave#7710: The only time I've experienced that is when power throttling which the soft powerplay table mod is something that I've done to make sure it's never a problem
Rave#7710: I've got the power limit set to 150% for my card now :P
Rave#7710: Which is probably excessive
Deleted User#0000: I didn't notice any issues... |
yosarianilives#1841: Is memory higher on fx?
frogsicle#8873: fx same clock scores a whole bunch worse on the gpu scores
yosarianilives#1841: That has an impact on physics score
frogsicle#8873: nope higher on x58
yosarianilives#1841: So higher graphics but lower physics score on x58?
frogsicle#8873: nope other way round... |
frogsicle#8873: brb food
frogsicle#8873: https://www.3dmark.com/fs/13930752
frogsicle#8873: https://www.3dmark.com/3dm11/12018066
yosarianilives#1841: Well you can't really compare firestrike to 3dmark11....
Frito#0907: yea thats not apples to apples lol
Frito#0907: https://www.3dmark.com/3dm11/12433433
Frito#0907: htt... |
yosarianilives#1841: 🤔
yosarianilives#1841: 🤔
yosarianilives#1841: 🤔
yosarianilives#1841: 🤔
yosarianilives#1841: 🤔
yosarianilives#1841: 🤔
yosarianilives#1841: 🤔
yosarianilives#1841: 🤔
yosarianilives#1841: :bzNotLikeThis:
frogsicle#8873: oooops wrong score
frogsicle#8873: im dumbXD
frogsicle#8873: was not paying... |
yosarianilives#1841: lol
Deleted User#0000: @Rave figured out what it was. an app that hooks into the game to read chat and position and stuff to help track server-wide stuff (timed mobs and such)
frogsicle#8873: https://cdn.discordapp.com/attachments/305981966292090881/371753936085975040/unknown.png
frogsicle#8873: ... |
yosarianilives#1841: Shouldn't it have one?
L456Tango64D#4361: Yes. I emailed them after triple checking the package
yosarianilives#1841: ah
Niobium#6334: Yeah..., that'd be a problem. Should come with at least 3 mounting brackets, if not 4.
yosarianilives#1841: So just figured out what the piece of wood that came wit... |
Rave#7710: Anyway it's doesn't matter I've just golded 3dm11 and now vantage with a 5960X on air, skrubs.
Deleted User#0000: new radeon drivers auto detected 3DMark and Superposition :S https://cdn.discordapp.com/attachments/305981966292090881/372483697082892298/unknown.png
Marcus Antonius#1439: Oh boy, firepro overclo... |
Alcyone#2233: @∫ntegral thanks
buildzoid#6254: 1.42V about 6 months
buildzoid#6254: wow
buildzoid#6254: 17.10.2 apparently uses a different SOC clock for the HBM on VEGA
buildzoid#6254: and it looks like VEGA requires HBM clock to be <= to SOC clock
buildzoid#6254: the new SOC clock is allow 1200MHz HBM clock!
buildzoi... |
buildzoid#6254: power play table
Mickulty#1560: ooh
buildzoid#6254: wish they gave us SOC voltage control
buildzoid#6254: and also guidelines on how much is too much for everything
Mickulty#1560: wonder if you're gonna end up with a 56 that beats 1080tis lol
buildzoid#6254: like 2.2GHz core and 1500MHz HBM on LN2
build... |
Mickulty#1560: meh, kryonaut is non-capacitative
buildzoid#6254: and how it's not a great idea
buildzoid#6254: and with all these new arches more paste is best
Mickulty#1560: https://cdn.discordapp.com/attachments/305981966292090881/372776854425174028/584032.jpg
buildzoid#6254: ok soo the HBM2 still doesn't scale with... |
Rave#7710: But tbh with the amount of force he's put on it I wouldn't be surprised if the board/socket is warped now.
Mickulty#1560: mm
Mickulty#1560: I mean tightening 1 all the way is in accordance with the instructions isn't it?
Rave#7710: Maybe but just use a bit of common sense and just get 1 to catch so it doesn'... |
Mickulty#1560: intel... eh
Mickulty#1560: debateable
Rave#7710: Yeah true, AMD do have multiple open technologies.
Mickulty#1560: tbh j2c just seems to spout uninformed, inflammatory drivel at every possible opportunity
Rave#7710: Also I respect that the Nvidia CEO is an actual engineer
Rave#7710: I don't even know who... |
Mickulty#1560: J2C: "boycotting RTG over pricing"
Mickulty#1560: GN: "HAF more like low airflow"
Rave#7710: Exactly, just say shit even if it's wrong since they don't do any or very little prior research.
Mickulty#1560: BZ: "Power color RX 480 is THE WORST" :AlzaFace:
buildzoid#6254: to be fair steve has a point on the... |
buildzoid#6254: I really wish there was an XOC targeted VEGA
Mickulty#1560: oh man that would be insanely awesome
buildzoid#6254: also if AMD would open up access to more GPU settings
Mickulty#1560: since it seems like it'd just scale and scale and scale
Mickulty#1560: kinda P4-style
buildzoid#6254: or FX
Mickulty#1560... |
buildzoid#6254: booting windows with a high HBM clock seems bugged
Rave#7710: Tbh the global hotkeys thing is something the OverdriveNtool Dev could implement.
Rave#7710: Or actually, if there's a program that lets you bind global hotkeys to run a script
Rave#7710: Which I believe the software for my mouse can do
Rave#... |
ohnny#3759: how do i find out?
Rave#7710: Look at it physically?
Rave#7710: https://www.geforce.com/sites/default/files-world/NVIDIA-GeForce-GTX-970-3qtr.png
Does it look like this?
Rave#7710: Or like this?
https://images10.newegg.com/ProductImage/14-121-899-S99.jpg
ohnny#3759: latter
ohnny#3759: i know this from msi a... |
ohnny#3759: https://cdn.discordapp.com/attachments/305981966292090881/373211097404145685/unknown.png
ohnny#3759: shit
Rave#7710: That's power
ohnny#3759: that is power
ohnny#3759: haha
ohnny#3759: just worked that out at the same time
Rave#7710: Although what on earth is running to be maxing the power limit all the ti... |
Rave#7710: You're just going to have to fine tune
ohnny#3759: what is more likely to crash
ohnny#3759: memory or the other?
ohnny#3759: and if I am running pubg in the background should I just keep raising until it crashes
ohnny#3759: or do I need to give some room?
Rave#7710: I doubt that max clocks that are stable in... |
Rave#7710: No but it (usually) helps
Rave#7710: Some gpus benefit from it more depending how much or little memory bandwidth there is.
yosarianilives#1841: Helps performance, especially with hbcc I'd think if you run vega
Rave#7710: Pretty much all vega carsd top out at 1100 hbm at 1.35v anyway.
Rave#7710: So that's ju... |
Niobium#6334: Yep
L456Tango64D#4361: Would you say it's something a beginner could accomplish? Does it matter what PCB or brand of card? There was one on Amazon for $20 so I picked it up.
L456Tango64D#4361: Wow. There's a lot of literature on this card. I thought it would be exhaustive to find guides like some of my ot... |
thepro2412#9707: So, a potentially stupid question here, but I'm trying to OC a GTX 950 2GB from Asus (The one with no external PCI power. Yes, that one, I know), and I'm seeing pretty major stuttering at +100 MHZ when the GPU is under 100% load. Is that a sign of instability or normal due to the fact resources are una... |
thepro2412#9707: Yeah, I did think that was a bit odd that i'm seeing some gnarly stuttering but not visual defects or BSOD
thepro2412#9707: I've been running this card at +100 MHZ over it's standard clock for a while now, probably about 8 months and never noticed any problems. Wanted to see if I could perhaps push it ... |
Rave#7710: If the backplate is providing support for the card and stopping it from sagging then take a good screw near the pcie slot
Frito#0907: Tbh a missing screw strategically placed won't matter
Frito#0907: Like that spot you have circled for example
Romeo#1188: @Coolbuts How much bigger is the accelero cooler?
I... |
∫ntegral#0450: 85°C
Snackycj#1434: aight
yosarianilives#1841: It starts boosting lower at 55c though
Snackycj#1434: Did a 100 mhz oc
L456Tango64D#4361: @Niobium did your 8800gts need a custom bios to go past 690mhz core? The slider locks at that limit on mine, just trying to figure if it's an easy fix via nibitor
Niob... |
adermz#3715: Watching that video right now 😛
Cautilus#5912: well you're in good hands then
adermz#3715: Im just lazy but i will watch the video
adermz#3715: Did this a long time ago but never OC'd my new gpu
Cautilus#5912: it's really easy and pretty safe on pascal since NVIDIA's locked everything off, so should be no... |
adermz#3715: Alrighty
adermz#3715: Now I am just not gonna do it
akir-#7891: You could make enough sure its stable
Cautilus#5912: well if yoiu're just gaming with your GPU I'd say you should just go for it
akir-#7891: Also games are usually fine
adermz#3715: Yeah I am just gaming
Cautilus#5912: if you're doing somethin... |
Marcus Antonius#1439: Would a Maxwell GTX 980 pick up much clock speeds using chilled liquid? It does 1570MHz on air at about 55°C-60°C with a slight overvolt to 1.288v. So assuming the chilled liquid is up to it, load temps in the high 20ies are what I expect
Frito#0907: probably
Frito#0907: but probably not a lot
Ner... |
Frito#0907: just does the best all around there going higher on voltage doesn't gain much
Marcus Antonius#1439: My voltage slider only does something after BIOS modding it, before it was basically for show
Snackycj#1434: any idea why my 1070 at stock is getting like a random microstutter in overwatch
Snackycj#1434: lik... |
Frito#0907: and your oc program settings
Frito#0907: afterburner / precision etc
Frito#0907: but it would appear your card doesn't want to increase voltage
Frito#0907: so key is probably to force it to via curves or increasing voltage in whatever
Frito#0907: sweet spot at least for my 1080 Ti on water is 1075 mv
Frito... |
yosarianilives#1841: Good guode
Thrul-Foe-Hammer#3033: i honestly have no idea what your talking about
yosarianilives#1841: Are you losing score after pushing mem or core?
yosarianilives#1841: What card?
Thrul-Foe-Hammer#3033: yeah, drastically. i havent even touched my mem yet and its way down from my control test.
yo... |
yosarianilives#1841: Your offset for core clock helps to influence the gpu to maybe boost higher
yosarianilives#1841: But it can make it use more power and heat up
yosarianilives#1841: Pascal starts boosting lower at 55c
yosarianilives#1841: So the lower you can get temps the better
yosarianilives#1841: So basically ju... |
yosarianilives#1841: You're stressing with unigine heaven right?
yosarianilives#1841: No furmark right?
Thrul-Foe-Hammer#3033: yes
yosarianilives#1841: And if temps are under control it shouldn't matter if you wait between benching
Thrul-Foe-Hammer#3033: ok, thats helpful
yosarianilives#1841: Yeah, tbh in pascal I woul... |
pkkshadow#5844: power limit first
pkkshadow#5844: then try core voltage
adermz#3715: I am running a GTX 1060 6GB does 84 in core clock and 500 in memory sound ok?
adermz#3715: Should i bump up the core voltage?
pkkshadow#5844: tbh, i don't know 10 series nvidia cards.
pkkshadow#5844: but try it in 10mv steps
pkkshadow#... |
adermz#3715: This look ok
pkkshadow#5844: yeah
pkkshadow#5844: you test it in a benchmark yet?
adermz#3715: Yeah +85 core and 530 in Memory ran stable but when i went into rainbow 6 it crashed a few times I think it was my CPU though which I overclocked at the same time. I will test higher OC's probably another time th... |
adermz#3715: Im not exactly sure like when or how much I should crank up the core voltage
adermz#3715: Like how much will 100% core voltage decrease my cards lifespan by
Rave#7710: Not much if at all
Rave#7710: Pascal is limited to 1.09v max iirc
adermz#3715: So if i were to crank it up too 100% right now it really wou... |
adermz#3715: I have been watching some videos from some people and it seems like they all are maxing their core voltage
yosarianilives#1841: @Rave plz no tag
yosarianilives#1841: K?
Rave#7710: k
yosarianilives#1841: But also, pascal loses performance with more voltage
Armin#3486: It depends on your power budget. Have y... |
yosarianilives#1841: But the IPC goes down with voltage from my experience
yosarianilives#1841: So you have to find a happy balance
adermz#3715: But 100% really would have no downside if the benchmark scores were higher
adermz#3715: I was getting a bit scared because I don't really want to damage my GPU
Rave#7710: No p... |
akir-#7891: And commercially software over voltage doesn't exist i believe
Niobium#6334: That's not really true
akir-#7891: ? @Niobium
Niobium#6334: I'd consider 1.2V a fairly safe voltage for Pascal, and going from 1.075V to 1.2V netted ~100MHz
Niobium#6334: It doesn't scale amazingly well, but it does scale
akir-#789... |
Frito#0907: Yeah you need water at least to see any decent gains thanks to boost 3.0
Niobium#6334: It's not even due to boost really. If boost didn't throttle them down, the cards would crash once they warmed up, Pascal really doesn't like being hot.
Frito#0907: I should see what I can get mine too do now with the rep... |
Frito#0907: Was just there best thing I had laying around
Cookie_Ninja9001#3857: I'm on water, all 3 of my cards and my CPU are on the same loop with a 480x60mm rad
Cookie_Ninja9001#3857: So there's no point in putting my voltage past 1.09V? I'm at work now and don't know the specific numbers I got from only increasin... |
Frito#0907: 50c on water is really hot though if you ask me
Cookie_Ninja9001#3857: Only ever spikes at 50, never stays there
Frito#0907: I'm running liquid metal on my die so I've never seen that kind of temp before on water
Frito#0907: I also don't get temp spikes
Cookie_Ninja9001#3857: And there's 3 cards and my CPU ... |
Frito#0907: Even then that bios only gets you up to 1.2v and power use skyrockets and the vrm needs cooling
Frito#0907: It's not really doable for a daily oc it was meant for an ln2 comp
akir-#7891: Wait why you have 3 1080tis? 3 way not supported. And games give no f*ck about it. @Cookie_Ninja9001
Niobium#6334: GPUs ... |
Armin#3486: mirror's edge(the old one, not the one they released last year)
Armin#3486: and batman arkham asylum
Armin#3486: 8|
akir-#7891: Old one can't stress 1080 enough can it? (Unless running 4k or something but not even sure 4k supported tbh.)
akir-#7891: Mirrors edge
akir-#7891: You mean non catalyst right? @Arm... |
Cookie_Ninja9001#3857: I'll have a Google when I finish work, but I'll probably just find a benchmark or stress test that supports PhysX and test on the CPU or GPU
yosarianilives#1841: Older 3dmarka like vantage an digital think 3dmark11
yosarianilives#1841: Do
Armin#3486: vantage definitely has a physx-test
yosarianil... |
yosarianilives#1841: @Cookie_Ninja9001 cloth
yosarianilives#1841: Hair
yosarianilives#1841: Fluids
yosarianilives#1841: Metro last light has a lot of physz
yosarianilives#1841: Especially for "jiggle physx" :AlzaFace:
Cookie_Ninja9001#3857: Wait CoD actually used PhysX for cloth, hair and fluids? I just assumed they we... |
Cookie_Ninja9001#3857: Hmm, I guess so, might have to buy it to see how it uses my GPUs
mk0830#1071: guys need a quick help here
mk0830#1071: so im about to buy a used gtx 1060 evga ssc 6gb, and the guy said that he has been overclocking the vram by about 25% for mining
mk0830#1071: is that range still safe for me to b... |
mk0830#1071: ah i see, i thought i read something about frying the gddr5 on tomshardware
Rave#7710: @yosarianilives no bios modding on pascal
yosarianilives#1841: @Rave xoc bios?
Niobium#6334: @yosarianilives How are you going to "kind of" damage a GPU with a raised power limit? Sure, you can blow up a MOSFET, but the... |
Niobium#6334: Sure. But that damage is going to be immediately visible, aka, card won't boot because a FET blew up.
OneWolf#8303: Well your not doing that on any card ever even the reference pcb is a bit overbuilt
Niobium#6334: So you aren't taking a risk by buying a used card unless the card is DOA.
Niobium#6334: @On... |
Ibby#2648: GPU: Asus rog strix gtx 1080 ti OC Edition
Rave#7710: jeez, afterburner in every single possible way.
Ibby#2648: is there a reason why? downloading afterburner now
Rave#7710: gpu tweak is pretty fucking awful is why
Rave#7710: And you should be able to do more with afterburner for pascal afaik.
Ibby#2648: h... |
Jokot#9771: Too bad you will need physix disabled if you are looking to submit it to hwbot
Cookie_Ninja9001#3857: Nah, I was asking in here the other day about raising the voltage on my 1080s to get a stable 2100+ core clock and was asked if a dedicated PhysX card makes much of a difference, said not much in games unle... |
Jamloki#7071: I didn't know whether it was or not
akir-#7891: İt is
akir-#7891: I'm just a sarcastic jerk sometimes
akir-#7891: :innocent:
Jamloki#7071: Anyway just about to write my issue out now 1 sec
Jamloki#7071: Basically, just got a 980 ti used for a pretty cheap price ($295), and I'm attempting to overclock it. ... |
Jamloki#7071: It was blue? Vrel
Niobium#6334: Your only solution is going to be bumping the voltage. 1350 isn't unreasonable for a meh 980Ti at that voltage.
Jamloki#7071: What kind of voltage do you think?
Jamloki#7071: Just a rough estimate is fine
Niobium#6334: 1.25 is perfectly fine for Maxwell on air.
Jamloki#707... |
Jamloki#7071: Ok, cheers.
Rave#7710: But +1 to AB
Jamloki#7071: Think I'm getting somewhere now, running with 1402mhz with an extra 74 mv. Temps are around 78/79c
Ibby#2648: Man I was so paranoid
Ibby#2648: I thought my gpu had coil whine
Ibby#2648: But it was just my dad snoring
OneWolf#8303: pfftt hahaha
OneWolf#8303... |
Niobium#6334: 300MHz is actually the standard idle on a 280, it shouldn't be idling at 500.
Nemo#9484: D:
Niobium#6334: IIRC there was some sort of bug in the drivers that caused them to idle at 500 occasionally.
Niobium#6334: In any event, I doubt the screen tearing is related to the GPU idling at 300MHz.
Nemo#9484: w... |
Frito#0907: 22c
Frito#0907: gpu and room
Frito#0907: lol
Niobium#6334: Lol. 8C delta ambient to core under load is pretty damn good.
Frito#0907: yes indeedy
Frito#0907: thats not overclocked but on the strix xoc bios so sorta overclocked
Frito#0907: lol
Niobium#6334: Guess I'll have to break out the conductonaut once ... |
Ibby#2648: Frito
Ibby#2648: How'd you OC your 1080 ti so high
Frito#0907: mm?
Frito#0907: 2100?
Ibby#2648: Yea
Ibby#2648: Unless I'm ass and that imm ass
Niobium#6334: I'm just going to casually drop this here 😉 : http://hwbot.org/submission/3648680
Frito#0907: https://cdn.discordapp.com/attachments/30598196629209088... |
yosarianilives#1841: it starts throttling at 55c, lol
Niobium#6334: Still won't push 1.2V?
yosarianilives#1841: thanks novideo!
Frito#0907: well yeah i could push the voltage too
Frito#0907: i suppose
Niobium#6334: *Do it*
Frito#0907: it starts throttling long before that yos lmao
Niobium#6334: Though I think your chip... |
Frito#0907: 2151
Niobium#6334: BTW, how does your memory clock on the XOC BIOS? Mine seems to crap out ~200MHz lower(offset) than the stock BIOS, I think the XOC has tighter straps.
Frito#0907: seems same on mine
yosarianilives#1841: Really? I thought it has looser straps for more ghz
Frito#0907: +490 ish
Niobium#6334... |
Frito#0907: 2176
Frito#0907: 2189
Ibby#2648: Damn
Frito#0907: 2202
Ibby#2648: I want something great for just stock cooling
Frito#0907: 32c
Niobium#6334: You better not go over that 😉
Frito#0907: lmao
Niobium#6334: If so, you have to prove it by running GPUPi-1B at 2326 😉
Frito#0907: backplate warm
Frito#0907: but gu... |
Niobium#6334: Damn, I guess the temps help to pick up that last clock bin or two
Frito#0907: started freezing up heaven and the system at 2214
Frito#0907: the obvious sign that its angry
Niobium#6334: Yep, that sounds about right
Frito#0907: tbh given same cooling i think all perform nearly the same
Frito#0907: but i m... |
Frito#0907: yeah exactly lmao
Frito#0907: could do a sick heaven run thoug on the 7740x
Frito#0907: 5.35 ghz wheee
Niobium#6334: lol
Ibby#2648: should i up my voltage up a bit and see if i can get higher numbers or naah on stock ?
.
Frito#0907: if your not on water it wont do much
Frito#0907: but never hurts to try
Fri... |
Frito#0907: hah yeah i didn't think to look at my watt meter
Niobium#6334: Load up GPUPi. And watch the numbers skyrocket 😉
Frito#0907: 124w rn
Frito#0907: lets see
Frito#0907: 496
Niobium#6334: From the wall in heaven?
Frito#0907: ya
Frito#0907: 124w idle in windows
Niobium#6334: Out of curiosity, check the NV drive... |
Niobium#6334: Yep, that sounds about right.
Niobium#6334: GPUPi is about as much of a power virus for GPUs as P95 is for CPUs.
Niobium#6334: It would push me well into the 40s with all of the fans at max.
Ibby#2648: Why does heaven benchmark run at +1 pixel more 😦
Ibby#2648: 2560x1441 is such an eyesore
Frito#0907: ne... |
Frito#0907: looks fine to me
Ibby#2648: It only obeys full screen sadly just checked
Ibby#2648: Unless something wrong on my end for windowed
Frito#0907: https://cdn.discordapp.com/attachments/305981966292090881/378408000211386368/heaven4kfs.jpg
Frito#0907: looks and works fine for me at 4k
Frito#0907: fs
Ibby#2648: I... |
Ibby#2648: and it stays persistant even after reverting back to normal
akir-#7891: @Niobium but benchmarks are they same score?
Niobium#6334: Yeah, I was testing with 3DMark, but it was margin of error
Niobium#6334: Depending on the two runs you looked at, either one might score higher
Ibby#2648: I keep forget to press... |
[ _,4° ] 177013 🐀💨🔥#9563: I dont think I can... anyway I swtich to MSI afterburner because that
[ _,4° ] 177013 🐀💨🔥#9563: is this okay ?
[ _,4° ] 177013 🐀💨🔥#9563: https://cdn.discordapp.com/attachments/305981966292090881/378894714478264331/image.png
[ _,4° ] 177013 🐀💨🔥#9563: some stranger said I could push... |
Rave#7710: Define "run"
akir-#7891: Minesweeper 👌
Rave#7710: It should be at the very least dx11 compatible so it can run things
Deleted User#0000: i mean
Mickulty#1560: ^
Deleted User#0000: tru
Rave#7710: Not particularily well mind you but you could still be the fastest 8470 on hwbot
Mickulty#1560: it can run basica... |
Mickulty#1560: and as you can see I took an asston of :glod: with it
Deleted User#0000: I wonder if it can crossfire...
Mickulty#1560: yeah it can
Mickulty#1560: bridgeless
Mickulty#1560: should work with a 6450, 7470 and other similar
Wormwood#0422: I'm sad, my 1080Ti can only hold between 2000-2050 at boost depending... |
pkkshadow#5844: *1 out of 1*
Deleted User#0000: xD
Deleted User#0000: ive just increased the overclock again
Deleted User#0000: so
Deleted User#0000: it'll be 1 out of 2 soon
Deleted User#0000: but ill also be 2 out of 2
Deleted User#0000: huh
Deleted User#0000: https://cdn.discordapp.com/attachments/30598196629209088... |
L456Tango64D#4361: Vaseline in the PCIE socket for GPU DICE?
Jokot#9771: vaseline is really messy and just likes to fuck up things from what ive heard
yosarianilives#1841: @L456Tango64D Nooooooooooo
Niobium#6334: ^^
Niobium#6334: That's the opposite of what you want to do
yosarianilives#1841: That';s how you ded a slot... |
yosarianilives#1841: Depends
yosarianilives#1841: I've had water in cpu socket
yosarianilives#1841: if you're lucky it won't post and nothings damanged
yosarianilives#1841: I was lucky
L456Tango64D#4361: I guess I'll try with z270 Apex and 980 first, learn what I can and move to z370 and kingpin. I'm not feeling lucky ... |
Skiptrace#4386: How are the 388.13 drivers? Are they any performance increase over 388.00?
Niobium#6334: Probably not, but I haven't tested it.
OneWolf#8303: Well this 1060 6 gb is better then i thought
OneWolf#8303: +900 mem is where it starts to wig out
OneWolf#8303: Also planning on volt modding it
Marcus Antonius#1... |
Mickulty#1560: it's not *that* conductive
buildzoid#6254: yeah no it's not gonna cause explosions
L456Tango64D#4361: Thanks gents! I've been reading every insulation guide I can find, I think I've got a good plan. I hope it's worth it. I have a 1200w PSU on its was to power the kingpin when I'm ready for it
suck ball#... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.