data stringlengths 14 24.3k |
|---|
Niobium#6334: Yeah, just open up the sensors tab of GPU-Z, make it decently wide, then run time spy.
Romeo#1188: ok
Romeo#1188: @Niobium Here it is
Romeo#1188: https://cdn.discordapp.com/attachments/320573666784182272/385243979240701953/unknown.png
Romeo#1188: https://cdn.discordapp.com/attachments/320573666784182272/... |
Niobium#6334: Okay, another idea.
Niobium#6334: Tell him to download GPUPi and run 1B.
Niobium#6334: Should only take ~20s to run
Romeo#1188: Hpet error
Romeo#1188: https://cdn.discordapp.com/attachments/305981966292090881/385246760265842699/unknown.png
Niobium#6334: Ugh, Win 10, right
Niobium#6334: One sec
Romeo#1188... |
Niobium#6334: I'd still be a bit surprised that it's having *such* a significant effect though.
Niobium#6334: But I don't think there's anything inherently wrong with either the CPU or the GPU.
Romeo#1188: yeah actually i doubt its the riser too
Niobium#6334: But I'm not sure what else to have you try.
Romeo#1188: im l... |
Marcus Antonius#1439: Well I'm crashing because this thing has to stay under 20°C to keep 1615MHz stable
Frito#0907: i've heard of pci-e risers hurting perf
Marcus Antonius#1439: But the flow rate is awful
Frito#0907: dont in light things like compute tasks like gpupi and mining though
Frito#0907: at least not enough t... |
Romeo#1188: the computer has a 700w psu
Niobium#6334: Yeah, I'm not worried about the PSU.
Niobium#6334: But the fact that it's an Aorus explains why the power reading looked so low.
Romeo#1188: i guess i can return the GPU in that case.
Niobium#6334: Aka, your GPU looks like it's performing fine, so I'm going to guess... |
Romeo#1188: its like this one
Romeo#1188: http://1stminingrig.com/white-usb-riser-ver-008-review/
∫ntegral#0450: used for mining
whiteshark#1560: well thats defently going to lower performance in games
Romeo#1188: i see
whiteshark#1560: cant you fit an x16 ribbon one?
Niobium#6334: Yeah, that's definitely the problem.
... |
Frito#0907: yeah usb ones are strictly for low bandwidth applications i.e. miners
Niobium#6334: Or a GPUPi monster, if that's what you're into 😉
yosarianilives#1841: Ie miners 😉 @Niobium
Romeo#1188: but it does have power from a 6 pin molex and a 4 pin molex plus a sata but that probably does not matter as its 1x la... |
twitchytoes#6978: 220w system draw during fire strike extreme stress lol
twitchytoes#6978: 900mhz and 1.022v
twitchytoes#6978: I'm almost positive I can go lower
twitchytoes#6978: Tfw you get the lowest stable voltage first try
Insert Name Here#0636: @twitchytoes there is no fan shroud so the LP heatsink is shiny af
tw... |
Insert Name Here#0636: fric
twitchytoes#6978: I just got done reinstalling windows lol
Insert Name Here#0636: ah lmao
∫ntegral#0450: 🇫
Marcus Antonius#1439: Welp, GTX 980 isn't happy over 1615MHz I think, I need to go colder.
Alcyone#2233: If I had neighbors They'd prob think I was vacuuming, time to get the experien... |
yosarianilives#1841: Just gonna say
yosarianilives#1841: What the fuck kind of benchmark has a warm up before it benches the cpu?!
yosarianilives#1841: Having a hard time running 5.15 Ghz on my 5960x because it heats my phase up to - 36c
Jumper118#2286: What compressor does it have?
yosarianilives#1841: I don't know th... |
yosarianilives#1841: I do have it in a 10-15c ambient room so that helps
Garydunlop96#7896: best overclock for my gtx 770 palit card?
yosarianilives#1841: You'll have to sew
yosarianilives#1841: Just test it and see
Garydunlop96#7896: okay
L456Tango64D#4361: Best OS for 3DMARK 11, Catzilla, Firestrike, Timespy? 7, 7, 7... |
Romeo#1188: ran several benchmarks today it was all fine, had 7011 on timespy before the OC
Romeo#1188: removed OC now
Romeo#1188: just wondering what might have caused the artifacts
pkkshadow#5844: dunno
Romeo#1188: ok thanks
Romeo#1188: anyways it has no artifacts outside of bios
pkkshadow#5844: that's good
Romeo#118... |
∫ntegral#0450: also the titan x
Evistro#9144: Gotcha, thank you
TehSoulja#0001: Basically it's the nickname for the architecture the cards were built on
Evistro#9144: Makes sense, thank you
Evistro#9144: 1500mhz is for the GPU Clock I assume? Is there a good number for the Memory Clock?
∫ntegral#0450: i think you've pr... |
∫ntegral#0450: but the vrms are on the display output side
∫ntegral#0450: but the g12 is made for the vrms on the other side
∫ntegral#0450: https://www.nzxt.com/uploads/product_image/image/1234/large_c306760d5e4ce7ec.jpg
Rugg#4267: yeah, thats it
∫ntegral#0450: vrm fan is on the right side
∫ntegral#0450: https://www.ek... |
pkkshadow#5844: and probably. it supports asetek stuff
Timo#2874: hm?
Timo#2874: https://cdn.discordapp.com/attachments/305981966292090881/385575059886178317/IMG_20171130_003727.jpg
Rugg#4267: that looks sick btw, do you know what the performance difference would be from a 120mm to 240mm rad?
Timo#2874: Probably quite... |
yosarianilives#1841: I bet I can out bench ur 1080 with MA vega
Timo#2874: MA?
Timo#2874: And to be fair, I only have decent thermal paste, not *good*
Rugg#4267: so will this mount to the g12 properly
https://www.newegg.com/Product/Product.aspx?item=N82E16835103252
yosarianilives#1841: @Timo it's murican for my
Timo#28... |
Timo#2874: Nothing is stopping you from doing that
Timo#2874: My CPU is under a 240mm
Rugg#4267: mostly for aesthetics honestly
Timo#2874: I recommend getting a second person for the mounting bracket of the G12, it was a pain mounting it alone.
Rugg#4267: but im sure it will be a lot quieter than my only 3 pin fans on ... |
Timo#2874: I wonder if too much pressure on the die can decrease cooling capability.
yosarianilives#1841: Aio sucks
Timo#2874: You suck
yosarianilives#1841: Big air cooler for cpu and gpu same price
Rugg#4267: yeah gpu's are bare silicon under the cooler arent they?
Timo#2874: @Rugg They are.
yosarianilives#1841: @Timo... |
yosarianilives#1841: Warranty is usually about 3 years
yosarianilives#1841: Heatsinks never wear out
Timo#2874: ¯\_(ツ)_/¯
Mickulty#1560: my freezer 240 died pretty quick soooooooooo
Timo#2874: AiOs arent a fucking pain in the ass to mount tho ¯\_(ツ)_/¯
Timo#2874: had a dark rock pro 3
Timo#2874: and jesus fuck
Timo#287... |
Timo#2874: that was beautiful
yosarianilives#1841: Also my aio has really annoying mounting
yosarianilives#1841: My noctua has great mounting though
Timo#2874: @yosarianilives thats on your aio though
Timo#2874: the lf 240 was easy as fuck to mount
yosarianilives#1841: NH d14 is super easy mode mounting
Timo#2874: I do... |
Rugg#4267: ok so
https://www.newegg.com/Product/Product.aspx?Item=N82E16835181029&cm_re=H55-_-35-181-029-_-Product
on the gpu w/ kraken g10 and
https://www.newegg.com/Product/Product.aspx?Item=N82E16835103252
for cpu seems okay?
Timo#2874: Why a g10? 🤔
Rugg#4267: is there even a difference, g12 isnt on newegg
Timo#287... |
Rugg#4267: i cant hear them w/ headphones on so idc
Timo#2874: the h55 is currently the loudest fan in my system
Timo#2874: lmao
Rugg#4267: I bought two corsair somethings didnt realise they were 3pin, but i didnt rly care so i still use them
Marcus Antonius#1439: I think I'm just gonna put the air cooler back on that ... |
Rugg#4267: what?
Timo#2874: I killed a RX 480.
Rugg#4267: lol, how?
Timo#2874: RX580 vbios
Timo#2874: Ran fine for a week
Timo#2874: Then the PSU shut off the PC never to turn on with it in it again
Marcus Antonius#1439: Did you ever find what died?
Timo#2874: 🙃
Rugg#4267: damn
Timo#2874: Assuming VRMs
Timo#2874: Cons... |
Marcus Antonius#1439: I'd bet it was a fuse if there was one
Timo#2874: I think there were two on the power connector
Timo#2874: / near rather
Marcus Antonius#1439: I did actually blow a fuse on my R9 380X Nitro Edition
Timo#2874: https://www.youtube.com/watch?v=EPwsLOX7Y_k
Marcus Antonius#1439: The card was like *fine... |
Timo#2874: @Marcus Antonius
Marcus Antonius#1439: Yes those are SMD ceramic HRC fuses
Marcus Antonius#1439: Damn, I prolly could have at least tested and possibly fixes those for you
Marcus Antonius#1439: By fixed I mean just use copper bars
Rugg#4267: wut
Marcus Antonius#1439: Who the fuck needs fuses
Rugg#4267: the g... |
Marcus Antonius#1439: And they're kinda expensive to replace
Rugg#4267: is that just a line of solder
Marcus Antonius#1439: I don't usen this meter anymore for mains now lol
Marcus Antonius#1439: Naw that's the current shunt
Rugg#4267: idk electronics
Marcus Antonius#1439: https://cdn.discordapp.com/attachments/305981... |
Rugg#4267: well, standard mobo connectors anyways
pkkshadow#5844: doesn't need it
Rugg#4267: shit -_-
Rugg#4267: so
Rugg#4267: I guess i need to split a header to 3 pins, or get a controller or smth
Timo#2874: id get a hub
Timo#2874: i had to sacrifice intake and my bottom fan
Timo#2874: to be fair, my case is open any... |
Rugg#4267: Can't say i didnt expect it though
twitchytoes#6978: @Alcyone my Silverstone fans do that when the voltage is just barely enough to spin. I've had it read 12krpm for a 180mm fan.
twitchytoes#6978: That would create a small tornado probably
Alcyone#2233: Mine just blipped to 2400 I think, 12k rpm 180cm fan, t... |
Rugg#4267: its the only one plugged into the cpu header
twitchytoes#6978: My Silverstones do it alone when the voltage goes too low too
Rugg#4267: afaik that shouldnt happen as its a 3 pin fan
twitchytoes#6978: Pwm doesn't change voltage. It runs 12v. My Silverstones are 3 pin and regulated by voltage via curve
Rugg#42... |
Niobium#6334: I've only seen Pascal do that when I set a flat V/F curve.
Marcus Antonius#1439: Temp differenc lol https://cdn.discordapp.com/attachments/305981966292090881/385599848251916300/20171130_011547.jpg
Marcus Antonius#1439: Idle tho, under load it rises a shit ton to like 18
Timo#2874: @Niobium some gigabyte v... |
Timo#2874: im really starving it of voltage
Timo#2874: which for some reason lets me run higher clock speeds
Timo#2874: https://cdn.discordapp.com/attachments/305981966292090881/385607665239195660/unknown.png
Niobium#6334: Yeah, that's Pascal, not surprising
Timo#2874: also probably kinda helps avoiding the temp issue... |
Timo#2874: and yet im still running 2100.5
Niobium#6334: Yeah, doesn't mean the card won't run fine. My 1030 is perfectly happy to run at 2GHz while it's doing that.
Timo#2874: https://cdn.discordapp.com/attachments/305981966292090881/385610177509851139/2017-11-30_02-56-49.jpg
Timo#2874: this gpu has not been hardwar... |
Core: 2100 (+/-)
Mem: 5556
VBIOS: EVGA -> Gigabyte, with a ridiculously high power limit
Cooler: H55 + G12
Timo#2874: i think thats about it
Niobium#6334: Shouldn't be that either, the Giga BIOS isn't *that* different.
Timo#2874: ¯\_(ツ)_/¯
Niobium#6334: I *really* wish that I could find a Pascal card which will accept ... |
twitchytoes#6978: Owned one
twitchytoes#6978: @Timo mobile
Niobium#6334: Pascal uses GPU Boost 3.0
Timo#2874: @twitchytoes Tap on the picture and top right to open in Browser
whiteshark#1560: i still think its because different amount of power sources
Niobium#6334: Doesn't matter which card it is
Timo#2874: https://cd... |
whiteshark#1560: @Niobium the card he has has 1 8 pin ,the one the bios is for has 2
Timo#2874: shouldnt matter too much
Niobium#6334: *Maybe*
Timo#2874: neither am i close to drawing that much
twitchytoes#6978: My 1060 Fe was way easier to hit a max stable than any of the other 1060s I have oced
Timo#2874: or maybe th... |
Timo#2874: and you can work with gpu boost
Timo#2874: at some degree
twitchytoes#6978: I've tried. I'd rather shut it off than even try to work with it
Timo#2874: https://cdn.discordapp.com/attachments/305981966292090881/385613576255307777/unknown.png
twitchytoes#6978: But can't
Timo#2874: the curve editor is nice
twi... |
twitchytoes#6978: Same curve
twitchytoes#6978: Run bench
twitchytoes#6978: 1093mv
bean#8086: Boost is great if you just buy a card and run it, but if you actually want to OC it’s just annoying
twitchytoes#6978: Run bench again
twitchytoes#6978: 1050mv crash
twitchytoes#6978: It just wasn't applying the voltage consiste... |
Niobium#6334: Some Pascal cards will scale like shit with voltage, others won't
Timo#2874: and im still going to doubt that youve been stable on 2200 with 1.093v.
twitchytoes#6978: I could only keep it consistent on 2230mhz because of how dumb the voltage was
Timo#2874: or even past.
twitchytoes#6978: I have fire strik... |
twitchytoes#6978: I don't have any personally at 2350. I couldn't get it that high but friend has claimed it had
twitchytoes#6978: I had it semi stable at 2270
Niobium#6334: The first one I could believe. The second one I don't.
twitchytoes#6978: I asked if he had any benches at 2300+
twitchytoes#6978: But it'll be a ... |
Niobium#6334: Probably not. Pascal doesn't normally scale nicely with voltage like that.
Niobium#6334: Do you know how old it is?
Timo#2874: @Niobium Needs a XOC BIOS to exist
Timo#2874: Don't think a 1060 has one
Niobium#6334: Doesn't
Niobium#6334: Only 1080/1080Ti versions are publicly available.
twitchytoes#6978: T... |
Niobium#6334: aka it'd need a hard mod to be benched properly
Timo#2874: Couldn't he just use Lookup on GPU Z? @Niobium
twitchytoes#6978: @Timo performance increased up to 9900 where it crashes
twitchytoes#6978: 9850 just crashed or not sometimes
twitchytoes#6978: Think it was not liking the heat
Niobium#6334: @Timo W... |
twitchytoes#6978: They'd lose so many sales if they straight cut it
twitchytoes#6978: But none of my personal 1060s passed 2070
twitchytoes#6978: My best undervolt on my fury =\ https://cdn.discordapp.com/attachments/305981966292090881/385641668457791492/unknown.png
Teemochu#8740: welp just figured out I actually can g... |
twitchytoes#6978: I see
twitchytoes#6978: I've always had major tears in the dragon like a slightly unstable core
twitchytoes#6978: Even at stock
yosarianilives#1841: Kombustor is basically furmark 🤷
Rugg#4267: So I was looking back at the kraken g12, but I didn't realise on the rx 480 the vrm's are on the wrong side ... |
pkkshadow#5844: right
pkkshadow#5844: oh hold on
pkkshadow#5844: https://www.alphacool.com/alphacool/en-send-it-and-get-one-cooler-for-free
pkkshadow#5844: here, if you can get a spare gpu
pkkshadow#5844: could use this and get a block made
yosarianilives#1841: Probably a new gpu methinks
yosarianilives#1841: Like LP 1... |
Rugg#4267: I mean thats also like a 20 day wait
pkkshadow#5844: yeah
pkkshadow#5844: but
pkkshadow#5844: it's also a free block with an aio
Rugg#4267: idk
∫ntegral#0450: well i mean you could just ziptie the aio on
∫ntegral#0450: like you did with your fans lul
Rugg#4267: well
∫ntegral#0450: not sure if the mounting pr... |
∫ntegral#0450: ziptie it over the vrms
Rugg#4267: ugh
Rugg#4267: no ziptie
Armin#3486: Alright, then glue it on
Armin#3486: Use hot glue
Armin#3486: Like we did in the days of old
Rugg#4267: also shapeways so expensive lul, .2 cubic inches (usa!) is like 20 bucks lmao
∫ntegral#0450: you can get one of these: https://ww... |
Rugg#4267: what does that even mean
∫ntegral#0450: rent a 3d printer
∫ntegral#0450: like print it online
Rugg#4267: ah yea
Rugg#4267: thats pretty annoying
∫ntegral#0450: well you can try something else like an arctic accelero
∫ntegral#0450: they should work ok
∫ntegral#0450: y u delete
∫ntegral#0450: and it looks like... |
bean#8086: Afterburner extended mode gets me another 30 MHz, but it breaks afterburner and have to use wattman
Rugg#4267: bios?
∫ntegral#0450: bios mod
∫ntegral#0450: rbe7 is the one you want
∫ntegral#0450: https://www.techpowerup.com/forums/threads/vbe7-vbios-editor-for-radeon-hd-7000-series-cards.189089/
∫ntegral#045... |
∫ntegral#0450: don't have zipties?
http://cdn.overclock.net/1/1e/1e744f7a_ef7a566fdd.jpeg
Ground#4016: nope
Ground#4016: just a giant amount of electrical tape
Ground#4016: a couple km actually
Ground#4016: ah, default baseclock is 915, mine is at 1121 now
Ground#4016: not that great hm
waither#1662: Does anybody have ... |
∫ntegral#0450: do that after you finish overclocking core
∫ntegral#0450: https://benchmark.unigine.com/superposition
∫ntegral#0450: get that to stress
waither#1662: lol that's a big file! I'm in!
waither#1662: And I don't need to modify fan curves or anythign yet?
∫ntegral#0450: shouldn't need to unless temps become an... |
Alcyone#2233: @waither yeah, fps can vary but the scores are usually fairly consistant. At least in Valley
agree with @∫ntegral on temps. I usually set a manual speed and keep increasing it until I reach a balance of noise and temps then set my curve around the temps that it can maintain at the noise level I find accep... |
waither#1662: ok, how high should that go? The fans didn't seem to be going super hard
∫ntegral#0450: try 50%
∫ntegral#0450: keep upping it until you can't bear the noise
waither#1662: and should I put the memory clock back to +0 then?
Alcyone#2233: start at when you can hear it and start increasing it until you cant s... |
waither#1662: Hm that didn't do anytihng other than beep at me
waither#1662: (still there)
∫ntegral#0450: it restarts the display driver
waither#1662: huh, yeah the screen flashed but the green dot still there. i'm going to restart. It could actually be a dead pixel (the monitor is new 4k/144hz, hence the want to overc... |
waither#1662: the power has been maxed at 110% this whole time
Justifiedparanoia#4764: time to mod your bios @waither
Alcyone#2233: 110 is max, shiggy
Justifiedparanoia#4764: get some extra tweaking in for the power
waither#1662: whoaaaa that soounds scary
Justifiedparanoia#4764: pretty easy, depending on your card
wai... |
Deleted User#0000: frames are because its bottle necked on a low end pc xD
Deleted User#0000: can anyone help on what limit i can reach for this card x.x
Deleted User#0000: not even sure where to start https://cdn.discordapp.com/attachments/305981966292090881/386240816831660054/unknown.png
yosarianilives#1841: Just pus... |
Romeo#1188: and its overclocked in bios, as i could not hit higher clocks in Afterburner
Romeo#1188: and it was unstable, now its really stable. But it has trouble with 4games that i know right now, it did not when i first overclocked it, but it got progressively hotter.
I have changed thermal paste NT-H1, and i will d... |
Romeo#1188: Yes
Romeo#1188: @∫ntegral The original one, or the overclocked one?
Romeo#1188: https://cdn.discordapp.com/attachments/305981966292090881/386278384814129153/GM204_--original.rom
Romeo#1188: https://cdn.discordapp.com/attachments/305981966292090881/386278414111342602/1518mhz_2.rom
∫ntegral#0450: what's yo... |
Romeo#1188: going to reboot
∫ntegral#0450: is it boosting to 1518?
∫ntegral#0450: or 1519?
∫ntegral#0450: because the bios says 1519
∫ntegral#0450: but the file name says 1518
Romeo#1188: Yes i am aware of that, i gave it that name when i was testing it a good while ago, when all i had to go by was monitoring software
... |
Romeo#1188: now i am going to see how high temps go
∫ntegral#0450: is it stable tho
∫ntegral#0450: temps would be almost the same
∫ntegral#0450: what voltage is it hitting?
Romeo#1188: @∫ntegral Thanks for helping,
No i would need to run heaven and other benchmark for that
Romeo#1188: i can do that later
Romeo#1188: ... |
∫ntegral#0450: pretty much
Romeo#1188: to stabilize it
∫ntegral#0450: don't think you'll get much lower than 1.25v
Romeo#1188: i think 1.261 was stock
Romeo#1188: but completely different clocks
Romeo#1188: 1262.5 was the highest stock value
Romeo#1188: so 1.250 is not bad
Romeo#1188: @∫ntegral Testing 1.250 now
∫nteg... |
∫ntegral#0450: games are a good way to test stability
∫ntegral#0450: you don't have to use heaven
Romeo#1188: Well skyrim with ENB still hits 86c
Romeo#1188: going to test shadow of war
∫ntegral#0450: is your fan speed maxed out?
PoppedRocks#4163: Hey can anyone help me OC my GPU right now
PoppedRocks#4163: I just got ... |
PoppedRocks#4163: On my phone https://cdn.discordapp.com/attachments/305981966292090881/386308947088375810/image.jpg
∫ntegral#0450: power limit slider
∫ntegral#0450: put it all the way to the right
Romeo#1188: no its not.... and this is the deal with fan speed maxed out earlier i get 75c, but since its a SFF and its lo... |
∫ntegral#0450: type 100
∫ntegral#0450: now run superposotion
∫ntegral#0450: or heaven
∫ntegral#0450: tho heaven might not be stressful enough
PoppedRocks#4163: Ok
PoppedRocks#4163: Do I need to restart
∫ntegral#0450: nope
∫ntegral#0450: https://benchmark.unigine.com/superposition
PoppedRocks#4163: Ok downloading now
Po... |
PoppedRocks#4163: So mine would be 1709 with the 100Mhz boost?
∫ntegral#0450: actual core clock
PoppedRocks#4163: Ok
∫ntegral#0450: gpu boost will auto oc it
PoppedRocks#4163: So I want to offset it by 400Mhz in the end
PoppedRocks#4163: Or what?
∫ntegral#0450: no
PoppedRocks#4163: ?
∫ntegral#0450: gpu boost will autom... |
∫ntegral#0450: and do 1080p extreme
PoppedRocks#4163: Ok running rn
PoppedRocks#4163: Do I need to check anything while it runs
PoppedRocks#4163: Cause it's full screen
Romeo#1188: @∫ntegral Shadow of war barely goes over 80c, usually stays at 79c. I guess that ENB just craps out gpu usage.
PoppedRocks#4163: ?
∫ntegra... |
Romeo#1188: yes at 85c
PoppedRocks#4163: @∫ntegral so I am at 66 Celsius and 1961 Mhz
Romeo#1188: i said i need it quiet :p
PoppedRocks#4163: Ohh it's u
PoppedRocks#4163: xD
∫ntegral#0450: sounds good
∫ntegral#0450: just let that run
∫ntegral#0450: if you see anything weird, then you need to back down core a bit
Popped... |
∫ntegral#0450: then that's fine
PoppedRocks#4163: Ok it ended
∫ntegral#0450: you'll notice if you see anything weird
PoppedRocks#4163: Can I raise OC?
∫ntegral#0450: yeah
PoppedRocks#4163: Ok
∫ntegral#0450: try +150 on core
PoppedRocks#4163: Ok
PoppedRocks#4163: What about memory clock
PoppedRocks#4163: Add anything to... |
Romeo#1188: ok adjusted fan curve
PoppedRocks#4163: Alright done
∫ntegral#0450: nothing weird?
∫ntegral#0450: scores are increasing?
PoppedRocks#4163: I forgot th first one
PoppedRocks#4163: First score
PoppedRocks#4163: :/
PoppedRocks#4163: But nothing weird so far
PoppedRocks#4163: Ik it increased by a bit at the sta... |
PoppedRocks#4163: 200 then?
∫ntegral#0450: yeah
PoppedRocks#4163: Ok
∫ntegral#0450: it might crash
PoppedRocks#4163: Will my whole pc crash
PoppedRocks#4163: Or just the benchmark?
PoppedRocks#4163: And is it hard to fix it if my pc stops working right??
PoppedRocks#4163: Ok @∫ntegral test finished
∫ntegral#0450: what ... |
∫ntegral#0450: keep upping it
PoppedRocks#4163: I crashed
PoppedRocks#4163: And my monitor is getting no signal
PoppedRocks#4163: My whole pc turned off @∫ntegral
∫ntegral#0450: wut
PoppedRocks#4163: Can I try restarting t
PoppedRocks#4163: Wait no it's on
PoppedRocks#4163: Can I turn it off and back on?
PoppedRocks#41... |
PoppedRocks#4163: wtf
PoppedRocks#4163: The power button is not working...
∫ntegral#0450: just force restart
PoppedRocks#4163: Turn of psu?
∫ntegral#0450: yeah
PoppedRocks#4163: Wait it worked
PoppedRocks#4163: Ok windows is booting up
PoppedRocks#4163: Should I Lower it to 240?
PoppedRocks#4163: Or even lower?
PoppedR... |
PoppedRocks#4163: And try that?
∫ntegral#0450: yeah
PoppedRocks#4163: Ok
PoppedRocks#4163: It reset offset to 0 for some reason
PoppedRocks#4163: I'll change it back to 225
∫ntegral#0450: yeah because you didn't set it to save settings on startup
PoppedRocks#4163: Ah
∫ntegral#0450: only do that after you've found a sta... |
PoppedRocks#4163: Now I'll try 225 at 4k
PoppedRocks#4163: Why is my average so much higher now??
PoppedRocks#4163: 51 fps
PoppedRocks#4163: It's only running at about 1995-2040 mhz
∫ntegral#0450: that's still pretty good
PoppedRocks#4163: Ok
PoppedRocks#4163: It's frozen
PoppedRocks#4163: Sounds playing but not video
... |
PoppedRocks#4163: Should I even try 210?
PoppedRocks#4163: Or just 200?
PoppedRocks#4163: Wait
PoppedRocks#4163: My power limit was not upped all the way @∫ntegral
PoppedRocks#4163: Should I try 225 with power maxed?
∫ntegral#0450: oh that might be why
∫ntegral#0450: yeah
PoppedRocks#4163: Ok
PoppedRocks#4163: Then tem... |
PoppedRocks#4163: It's at a higher clock for some reason now
PoppedRocks#4163: 2050-2070mhz
∫ntegral#0450: yeah just gpu boost being retarded
Rugg#4267: just curious whilst reading chat, what card r u using?
PoppedRocks#4163: There are weird color flashes
PoppedRocks#4163: Very subtle
PoppedRocks#4163: Yeah it's not wo... |
PoppedRocks#4163: Ok
PoppedRocks#4163: Running it down 10 MHz now
PoppedRocks#4163: 205 -> 195
PoppedRocks#4163: It's way less triangles at 4k now
PoppedRocks#4163: 3.5million instead of the 6-7 million at 1080p
∫ntegral#0450: triangles?
PoppedRocks#4163: It's at bottom right of stats yeah
PoppedRocks#4163: Don't know ... |
PoppedRocks#4163: Ok
PoppedRocks#4163: How is a +190 OC for a 1070ti?
∫ntegral#0450: offsets mean nothing
∫ntegral#0450: what's your core clock?
∫ntegral#0450: like in stress tests?
PoppedRocks#4163: 2050
PoppedRocks#4163: About
∫ntegral#0450: yeah that's pretty decent
PoppedRocks#4163: Ok
PoppedRocks#4163: Now memory ... |
PoppedRocks#4163: How much do I raise it by
PoppedRocks#4163: 100?
∫ntegral#0450: what is the stock memory clock?
∫ntegral#0450: like the actual frequency
PoppedRocks#4163: I am not sure it just says +0
PoppedRocks#4163: Where should I check?
Rugg#4267: should be near where u found the core clock
∫ntegral#0450: how did... |
PoppedRocks#4163: 4006mhx
PoppedRocks#4163: I'll raise by 100
∫ntegral#0450: yeah you can raise memory in larger increments
∫ntegral#0450: so try +200 next
PoppedRocks#4163: Ok
PoppedRocks#4163: Will OCing the memory really increase performance or is it not by much?
∫ntegral#0450: a bit
∫ntegral#0450: not as much as co... |
PoppedRocks#4163: Ok done
PoppedRocks#4163: I'll add 100
∫ntegral#0450: yeah just keep doing that
∫ntegral#0450: make sure there's nothing weird
PoppedRocks#4163: Ok
PoppedRocks#4163: Adding 100 again niw
PoppedRocks#4163: +300 now
Rugg#4267: Hey integral do you know why my gpu and cpu don't run at full speed despite n... |
Cameron#9811: After which it crashes
Cameron#9811: I could probably swap the TIM
Cameron#9811: Asus isn't exactly known for amazing TIM are they
MFN_blessthefall#3905: Anybody here have a xfx Radeon 480 or have owned one?
Rugg#4267: reference*?
Rugg#4267: or an actual xfx one
MFN_blessthefall#3905: I'm not exactly sure... |
Rugg#4267: so its not the reference
∫ntegral#0450: oh right
PoppedRocks#4163: Hey I am back and I'll OC VRAM more now
MFN_blessthefall#3905: It's the first picture exactly
PoppedRocks#4163: My vram is at +400 now
PoppedRocks#4163: Should I keep increasing it by 100?
∫ntegral#0450: sure why not
PoppedRocks#4163: Ok
∫nte... |
PoppedRocks#4163: @∫ntegral ?
PoppedRocks#4163: sorry to keep bothering u thanks for your help
Rugg#4267: wait @MFN_blessthefall what was your question?
PoppedRocks#4163: Wait I'm getting weird color flashes
PoppedRocks#4163: I'll go down to 450mhz
∫ntegral#0450: yeah that's ram being unstable
MFN_blessthefall#3905: Th... |
PoppedRocks#4163: Damn
MFN_blessthefall#3905: Your probably right. I'm currently working on CPU oc after that ram than gpu so I haven't done a whole lot of reading on the subject yet.
Rugg#4267: Yeah, i would just do some gpu benchmark with each bios and whichever one is higher is almost definitely the performance mode... |
PoppedRocks#4163: @∫ntegral ?
∫ntegral#0450: yeah that sounds good then
PoppedRocks#4163: Ok
PoppedRocks#4163: Should I do an 8k test
PoppedRocks#4163: Or is that much stress unnecessary
∫ntegral#0450: yeah why not
∫ntegral#0450: it'll stress the vram
PoppedRocks#4163: Ok wish me luck
∫ntegral#0450: 🤞
PoppedRocks#4163... |
∫ntegral#0450: idk
∫ntegral#0450: gpu boost is weird
PoppedRocks#4163: I may have seen one flicker
PoppedRocks#4163: Not positive
∫ntegral#0450: but you're still hitting 2000MHz so yeah
∫ntegral#0450: just stress it again if you're not sure
PoppedRocks#4163: Ok
PoppedRocks#4163: Well it made it through the test
PoppedR... |
PoppedRocks#4163: And used most of my vram 😭
∫ntegral#0450: yeah that sounds about right for 8K
PoppedRocks#4163: Ok did it again and it's fine
PoppedRocks#4163: Should I set it to boot like this now?
∫ntegral#0450: yeah
PoppedRocks#4163: So I just select the widows thing under startup
PoppedRocks#4163: So it glows re... |
PoppedRocks#4163: Thanks so much @∫ntegral for helping me overclock my ram CPU and GPU
PoppedRocks#4163: Lol
∫ntegral#0450: np
PoppedRocks#4163: Oh no my pc froze
∫ntegral#0450: rip
PoppedRocks#4163: Could that be a GPU problem?
∫ntegral#0450: possibly
PoppedRocks#4163: Or is it just from exiting Overwatch?
PoppedRocks... |
PoppedRocks#4163: Not during the game tho
PoppedRocks#4163: So I think it might just be an issue with Overwatch and how it launches
PoppedRocks#4163: Idk
∫ntegral#0450: oh probs then
∫ntegral#0450: try another game?
PoppedRocks#4163: Sure I'll try csgo in a second
PoppedRocks#4163: Csgo seems fine
PoppedRocks#4163: Get... |
∫ntegral#0450: i'd lower both at the same time
∫ntegral#0450: what are they at?
PoppedRocks#4163: Let me check 1 sec
PoppedRocks#4163: OV also just restarted in a weird res
PoppedRocks#4163: Clock speed is at +190 and memory is at +450
PoppedRocks#4163: Since I wasn't having problems with clock speed should I just lowe... |
PoppedRocks#4163: The resolution changed in settings for some reason
PoppedRocks#4163: To an odd one with black lines
PoppedRocks#4163: I changed it back now and OV is working normally
PoppedRocks#4163: At least in skirmish
PoppedRocks#4163: Should I raise speeds now?
∫ntegral#0450: i'd go play a bit more
PoppedRocks#4... |
∫ntegral#0450: rip
∫ntegral#0450: can you adjust core voltage?
PoppedRocks#4163: No
∫ntegral#0450: ok go into msi ab settings
PoppedRocks#4163: They don't let u on 1070ti apparently
PoppedRocks#4163: Ok
∫ntegral#0450: click unlock voltage control
∫ntegral#0450: and voltage monitoring
PoppedRocks#4163: Ok
PoppedRocks#41... |
∫ntegral#0450: ok cool
∫ntegral#0450: what is the voltage reading?
PoppedRocks#4163: Where does it say?
∫ntegral#0450: above the temperature?
PoppedRocks#4163: 650mV
∫ntegral#0450: can you go into overwatch and see what the voltage says then?
PoppedRocks#4163: Ok I'll start a game
∫ntegral#0450: what temps are you hitt... |
∫ntegral#0450: that'll up it ot 1100mV
∫ntegral#0450: it'll help with core stability
PoppedRocks#4163: Do I increase frequency also?
∫ntegral#0450: nah just leave it for now
∫ntegral#0450: we change one thing at a time
∫ntegral#0450: we added more voltage
∫ntegral#0450: so if it's still unstable, it's probs memory
Popp... |
PoppedRocks#4163: Lost some frames
PoppedRocks#4163: I dropped it
PoppedRocks#4163: Now I'm back at about 140
∫ntegral#0450: better than having yellow and green things on your screen lol
PoppedRocks#4163: Good point
PoppedRocks#4163: It seems of be stable now
PoppedRocks#4163: Could I try +350?
PoppedRocks#4163: Or is ... |
PoppedRocks#4163: lol
PoppedRocks#4163: So what's the best thing to do now
PoppedRocks#4163: 350mhz appears to be stable
∫ntegral#0450: *appears*
∫ntegral#0450: you have to find the sweetspot
PoppedRocks#4163: 😛
∫ntegral#0450: add enough voltage so that temps don't increase too much and so that you can up core clock o... |
PoppedRocks#4163: Up core clock to 170?
∫ntegral#0450: yeah
∫ntegral#0450: see if that runs
PoppedRocks#4163: Ok running OV now
∫ntegral#0450: ok cool
∫ntegral#0450: btw, isn't the abbreviation for overwatch OW, not OV?
PoppedRocks#4163: Oh yeah mb xD
PoppedRocks#4163: It seems stable rn
∫ntegral#0450: can't really tel... |
∫ntegral#0450: what's your core clock at when in OW?
PoppedRocks#4163: I just lost internet connection I'll recheck in one sec
PoppedRocks#4163: @∫ntegral 2050mhz I think
∫ntegral#0450: that's pretty good
PoppedRocks#4163: I think that's the boost
PoppedRocks#4163: It says in MSI afterburner and I think I'm looking at ... |
∫ntegral#0450: i think OW shows stats as well
∫ntegral#0450: idk which tho
PoppedRocks#4163: It does but not many
PoppedRocks#4163: Vram usage and fps
PoppedRocks#4163: What do I change in ab display settings?
∫ntegral#0450: find the settings you want to overlay
∫ntegral#0450: and tick show in on screen display
∫ntegra... |
PoppedRocks#4163: No
PoppedRocks#4163: When I downloaded ab I did not download the other thing with it
PoppedRocks#4163: Is that why?
∫ntegral#0450: possibly
PoppedRocks#4163: How should I go back and download that?
∫ntegral#0450: you can download it as a standalone program
∫ntegral#0450: http://www.guru3d.com/files-ge... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.