data stringlengths 14 24.3k |
|---|
∫ntegral#0450: they released a bios that fixed it
∫ntegral#0450: did you set the memory clock to be x8?
∫ntegral#0450: the effective memory speed for gddr6 is x8
∫ntegral#0450: you can try flashing other 2080 bioses
∫ntegral#0450: it really depends on the program
∫ntegral#0450: but gddr6 is x8 like gddr5x
∫ntegral#0450... |
Deleted User#0000: i wanna overclock my GPU but temps are already as high as I would like : (
pkkshadow#5844: what gpu?
Deleted User#0000: sounds like you need a high powered desk or water
pkkshadow#5844: @Deleted User not exactly
Deleted User#0000: or undervolt tbh
pkkshadow#5844: @Deleted User what gpu do you have?
D... |
Deleted User#0000: idk
TruxRobJ#1911: my dude, I get low 80s with a stock cooler 1080ti FE with an overclock
Deleted User#0000: lol
DaGunzi#1241: yeah try without side panel so you see if its airflow related
Deleted User#0000: I still think my temps should be lower from what I saw before
Deleted User#0000: and yeah I'v... |
pkkshadow#5844: want a high level overview of pascal oc?
pkkshadow#5844: <https://www.reddit.com/r/overclocking/wiki/gpu/nvidia/pascal>
Deleted User#0000: ty
Deleted User#0000: hm so it's normal for clocks to drop as temp rises?
Deleted User#0000: thought so
pkkshadow#5844: yes
Deleted User#0000: i think my clocks sit ... |
pkkshadow#5844: think their problem is solved somewhat though.
TruxRobJ#1911: I have one Vram module that gets so damn hot compared to the others, tested with a k-type probe, and am currently thinking about just buying like 4 different thicknesses of thermal pads :AlzaFace:
Deleted User#0000: I appreciate the help anyw... |
saylae#7029: i see people saying mid 70s is fine to people saying to keep it under 70 or timing issues
saylae#7029: im lost ha
Betrayed#3582: 70s is fine for running
Betrayed#3582: 70s isn't that great for overclocking it
The Destroyer of Worlds#8658: How close (in fps difference at 1440p) could an OCed and UVed Vega 6... |
The Destroyer of Worlds#8658: Yeah, I understand.
The Destroyer of Worlds#8658: Do you at least know if it could get above 90 fps 1440p (for vr) as a vague estimate
pkkshadow#5844: probably can
The Destroyer of Worlds#8658: Past that it doesn't really matter, I guess, so thanks.
mOnK_ion#0454: how good is Msi afterburn... |
Ant_IV#4437: 2080 TI FE original card on EVGA Hybrid Kit.
Ant_IV#4437: Frankenstein GPU
Ant_IV#4437: Temps never went over 64C
Ant_IV#4437: But I’m thinking the temps should be better. Wonder if there is air in the system.
Ant_IV#4437: https://cdn.discordapp.com/attachments/305981966292090881/564122405275041812/image0... |
what problems are you having?
Battlefield_Ace#9175: ive had my games crashing all day after installing it last night. i thought it was the bios that i had also flashed last night, so i reflashed it, thinking some bits were lost or smthn. then, after the first bios reflash on this driver(last nigth was b4 i updated), it... |
Battlefield_Ace#9175: in that case that wasnt the issue for me. it was using the driver, just the driver was fucked
pkkshadow#5844: yeah. i have heard 19.4.1 to cause problems for some.
19.2.2 is pretty solid imo.
Battlefield_Ace#9175: yeah, if i wasnt using 19.1.1, id probably use 19.2.2. theyre the only drivers ive n... |
pkkshadow#5844: and it might've been your windows install. if it is bloated.
Battlefield_Ace#9175: many variables yeah
Battlefield_Ace#9175: but at the end of the day, it didnt work for me, and i had no other reason to make it in particular work, so just use a different version
pkkshadow#5844: i had to reinstall win 10... |
Betrayed#3582: but if your VRMs overheat
Betrayed#3582: etc
pkkshadow#5844: ^^^
Betrayed#3582: FurMark be the VRM killer
Mickulty#1560: Furmark only pushes GPU, not CPU. It's useless on modern cards because it generally makes you power throttle, so you can't test an OC with it.
Battlefield_Ace#9175: ik, but thats not ... |
swollenballs1972#2147: hello
swollenballs1972#2147: I've got a dual fan gigabyte 1050ti and wanna know what kinda overclock I can get
Marulv#0287: @mOnK_ion unless you need specific features of the evga xoc, I would use afterburner. I use xoc because evga has made lights and fans that o my works with their software. So... |
adi769#6854: I have no clue how the timings work, hell I barely know how to do ddr4 timings, but hey if it works it works ¯\_(ツ)_/¯
adi769#6854: Integral's program that does it is pinned
Nutterin#0246: I heard vega causes ripples which can take up to 600W, now - do and can these ripples trigger OCP? On units like seaso... |
Gospar#8214: but elo interwebz police
Betrayed#3582: Yes to return the product
Betrayed#3582: for a refund
Nutterin#0246: and rebuy it
Betrayed#3582: Not to buy another product
Nutterin#0246: cuz you liked it again
Betrayed#3582: That is fraud
Gospar#8214: il go with another custom card? o__O
Gospar#8214: since i dont ... |
kona#9246: you can remove power limits with bios mod?
NuclearDebris#1984: Yes
NuclearDebris#1984: You can edit almost anything with a bios mod
kona#9246: damn
kona#9246: it's just really hard to find any solid info
kona#9246: every link i find is either badly explained videos, or ppl doing mods geared toward mining
kon... |
Tech Wizard#8688: ASUS Expedition
kona#9246: it's the fancy ASUS version iirc
Valkrys#8394: Most Polaris gpus can overclock and undervolt at the same time.
Valkrys#8394: Like, you could probably run 1400mhz on slightly less than stock voltages.
Tech Wizard#8688: Not interested in overclocking. Already getting way more ... |
Tech Wizard#8688: Can u check asic quality with software?
Valkrys#8394: Google?
kona#9246: so many links seem to be filled with miner virus trash
Valkrys#8394: There's a lot of forks yeah
Valkrys#8394: If I remember I'll put my copy in a zip
kona#9246: WHEW BOY
kona#9246: stock bios with OC yielded 9100 points
kona#924... |
kona#9246: i did
kona#9246: i checked about unflashing and it looks like a hassle
kona#9246: involved soldering shit and whatnot
kona#9246: btw admins
kona#9246: can i post the softwares i used? maybe get them pinned?
kona#9246: was kind of a hassle to find safe versions of some things, since i mistrust SW that's relat... |
kona#9246: 🤷 seems to have booted, running a bench RN to see if the new strap is any better
kona#9246: okay... it booted, but too tight for 2100 on vram, lowered to 2000 and it worked but low score (prolly too many errors) trying again at 1960
Valkrys#8394: @kona So you found a good copy of polaris bios editor?
kona#9... |
kona#9246: so i just stole it's memory timings
kona#9246: which weren't ideal
kona#9246: any1 know up to what voltages are safe for daily on vram and core?
Shiga#0387: if I use msi afterburner to increase core clock, memory clock, and core voltage, is it unsafe for my 2080?
Shiga#0387: Should i put 100% in the core vol... |
Betrayed#3582: 1.09v
Betrayed#3582: and it might help to increase the voltage limit to 100%
Shiga#0387: I cant increase it?
Shiga#0387: or I can increase it to 1.09?
Betrayed#3582: You can increase it to like 1.09
Shiga#0387: that should be safe, right?
Betrayed#3582: It might net you like
Betrayed#3582: 12mhz
Betrayed... |
Shiga#0387: i did that, my voltage doesnt go above 1.050
Betrayed#3582: 🤷
Betrayed#3582: then drop temps
Shiga#0387: should I just leave it like that?
Betrayed#3582: yeah its fine
Shiga#0387: okok, thanks
Vyse#2356: holy moly setting gpu fan speed to 100% is like im about to fly to space
Vyse#2356: why not use auto
Vy... |
Vyse#2356: maybe stupid but during stress testing should i shut down other graphical applications such as videos / youtube for the gpu to be able to do 100% work on the stress test
Vyse#2356: or doesnt that matter at all
Vyse#2356: on stock my gpu is 80degress celsius what
Betrayed#3582: :bzNotLikeThis:
Betrayed#3582: ... |
hitek#9195: what are your fan speeds running at?
hitek#9195: oh 100%
Vyse#2356: not 100%
Vyse#2356: ive connected them to a hub
Vyse#2356: because i dont have that much fan headers on my mobo
Vyse#2356: the ones connected to the mobo i dunno how to check fan speed
Vyse#2356: gpu fan was running at 60-70%
Betrayed#3582:... |
Betrayed#3582: What GPU is this?
Vyse#2356: 1070
Battlefield_Ace#9175: yes
Vyse#2356: stil i dont get it how my gpu is 60 degrees idle and 80 degrees on load
Vyse#2356: all guide i see on youtube they have 30-40 degree idle
Battlefield_Ace#9175: yeah 60 is quite high
adi769#6854: yay for 0db fan mode
adi769#6854: I'm j... |
adi769#6854: I don't think it should be much if at all higher with 2
adi769#6854: but with more/high refresh rate it seems to
Battlefield_Ace#9175: have u repasted? how old is the card?
Vyse#2356: donw know what repasted means but i guess no
Vyse#2356: late 2016
Vyse#2356: by late i mean december ish
Battlefield_Ace#91... |
Battlefield_Ace#9175: on the die
Betrayed#3582: on the die
Vyse#2356: okay im googling this sht
Betrayed#3582: https://cdn.discordapp.com/attachments/305981966292090881/564970718404542484/20190302_131107.jpg
Betrayed#3582: That's a 1080 strix
Vyse#2356: yeah i didnt open mine up
Vyse#2356: this was the 2nd pc i built,... |
Battlefield_Ace#9175: probably if u havent cleaned for 2 years yeah
Vyse#2356: =)
Vyse#2356: i also regret my case purchase
Vyse#2356: u know why i bought the case i bought
Vyse#2356: because the only good build a pc video was made inside that case
Vyse#2356: h440
Vyse#2356: lul
Vyse#2356: its silent but has bad airflo... |
Vyse#2356: back then rbg fans werent a thing, today i dont use any lighting
Battlefield_Ace#9175: your gpu heatsink might be a bit clogged up with dust. nothing a bit of compressed air wont fix
Vyse#2356: if its bad ill take pictures
Vyse#2356: see you around, thanks for your help
Battlefield_Ace#9175: @kona what thing... |
Betrayed#3582: and I didn't have a brush
adi769#6854: but I may be borderline OCD as far as I can tell
Betrayed#3582: I didn't want to rip one off from paper towel
adi769#6854: though a cotton swab and iso is easy
Alcyone#2233: I use a kids toothbrush and iso. Its pointless but I like everything just so
adi769#6854: ho... |
kona#9246: unless ur gpu is a 9800GT it shouldn't be that hot idle
kona#9246: normal idle temps for gpus are around up to 10c over ambient
Vyse#2356: It’s a 1070
Vyse#2356: Case fans were at 40% ca 700rpm, gpu fan at 0
Vyse#2356: At idle
Vyse#2356: Maybe it runs at full clock on idle mode or something
Vyse#2356: Also I... |
Vyse#2356: At 60 degrees idle they are also 0
Vyse#2356: But it seems that my gpu is running on load all the time because people posting screenshots of their afterburner with like 1/5th the clock speed and ram speed of my afterburner
Vyse#2356: That’s because theirs is idle and mine is not , why I don’t know yet
Vyse#2... |
Vyse#2356: even at idle
Vyse#2356: i have a silent case and just set fans to 50% to test temps, i dont hear anything and now its 38 degrees, down from 53
∫ntegral#0450: really up to you
∫ntegral#0450: not like running your gpu at 55C when idling will damage it
Vyse#2356: I will just do some benchmarks and tweak Fam sp... |
Vyse#2356: i did
kona#9246: if 200 crashes it's out
kona#9246: if 150 gets you better scores than 200 then keep 150
kona#9246: if 100 gets best score then keep 100
Vyse#2356: it doesnt crash i just see some blue flickering going on from 200 to 350 almost the same amount, crashing at 400 tho
Vyse#2356: okay ill keep wat... |
kona#9246: unigine is prolly a lil shorter
kona#9246: but heaven is hella outdated
Vyse#2356: everyone recommending unigin heaven
kona#9246: heaven is only good for like coarse stability testing
kona#9246: use superposition's 8k optimized profile for finer adjustment
Vyse#2356: so with +150mhz memclock everything is fi... |
Battlefield_Ace#9175: yeah, ive had that as well
kona#9246: still working on figuring out what's what, and if ill get more perf from stock timings + higher OC vs tight timings & less mhz
Battlefield_Ace#9175: ddu the drivers? how about system32, syswow64, etc
kona#9246: hahahaha exactly
kona#9246: and from what i've he... |
Battlefield_Ace#9175: also thats my daily bios. how do your numbers compare?
Battlefield_Ace#9175: as for your voltage question from last night (if ur still interested), i answered it earlier, heres a repost: u cant set vram voltage.(vddq iirc) vddc (core) is safe up to 1.25v air, 1.35 water. vddci (mem controller) i T... |
kona#9246: I can get the core stable at 1575 with stock voltage and Max slider
Battlefield_Ace#9175: rly? wow. 580 yeah?
kona#9246: And I could get the vram stable with stock timings at 2100-2150
kona#9246: Yeah, 580 nitro+
Battlefield_Ace#9175: same as mine. damn thats a nice core
kona#9246: Then with the 1750 strap i... |
Battlefield_Ace#9175: *only. thats still not bad
kona#9246: 🤔 I'd prolly get better scores if I locked my core to 1500 with stock voltage and got better ram clocks
kona#9246: But with the block incoming and some ghetto ram cooling I can prolly max out both
Battlefield_Ace#9175: i need to get mine under water as well.
... |
Battlefield_Ace#9175: ill run 1 now. nrly set up but i never rly run superpos-mainly fs for me
Battlefield_Ace#9175: i get 65 with the modded settings in my bios. if i max the fans much less
kona#9246: Meh I'm not gonna lie imo putting 8gb ok these cards hella absurd overkill
kona#9246: Oh my curve maxes fans at like 5... |
Vyse#2356: so when seeing distortions sometimes with +200mhz and +500mhz and inbetween i should take the best score i guess?
Vyse#2356: 200 stable, 250 artifact, 300 stable, 350, artifact, 400 stable, 450 artifact, 500 stable
Vyse#2356: dont know what to think of this
Battlefield_Ace#9175: @kona i ran superposition for... |
Vyse#2356: Valley also 130 stable 140 artifacts
Vyse#2356: Should I just ignore heaven
kona#9246: okay @Battlefield_Ace think i got something nice working
kona#9246: card is pretty odd haha
kona#9246: currently running a superposition with those auto timings at 1550 / 2080
kona#9246: kay
kona#9246: got 2906 points on 1... |
kona#9246: i just put all my stuff to 9999 since i know i'll never go past ~300W
Battlefield_Ace#9175: i prefer just to limit it to my vrm, just for that last protection. obviously its never gonna hit 450w tho
Battlefield_Ace#9175: what cpu r u using in ur 580 system btw @kona?
kona#9246: 3970X
kona#9246: wbu?
shine#57... |
shine#5765: i dont have it here https://cdn.discordapp.com/attachments/305981966292090881/565291105940406272/unknown.png
Alcyone#2233: most 75w pcie power only cards have no power limit or voltage adjustment afaik.
Betrayed#3582: new BIOS so you can burn your PCIe slot :AlzaFace:
shine#5765: i had it here before..?
shi... |
adi769#6854: or Ctrl + F because keyboard shortcuts > using a peasantry mouse
Battlefield_Ace#9175: @kona r3 1200
SPLiT#1885: I'm on Linux and want to over clock my 980ti ftw. Idk what to put my power to as it's not % but watts
SPLiT#1885: https://cdn.discordapp.com/attachments/305981966292090881/565302032920215590/im... |
Betrayed#3582: well then do the math
LTS#4314: I may have just lost the silicon lottery hard
LTS#4314: 2080ti EVGA FTW3 Ultra Hybrid
Adorablekitten#4590: just got a sapphire vega 56 pulse, what can i oc this thing to?
LTS#4314: I can't push past a 85mhz overclock on the chip. Maxed out fan, power limit, and voltage
pkk... |
Betrayed#3582: 150w spec?
Betrayed#3582: 6pin is 75w IIRC
Betrayed#3582: PCIe 75w
pkkshadow#5844: @Adorablekitten here's a general guide from our wiki.
https://old.reddit.com/r/overclocking/wiki/gpu/general
Betrayed#3582: Just add up your power connectors and set that as your limit
pkkshadow#5844: wattman is pretty goo... |
pkkshadow#5844: i'm not saying you can blow up the card and rma it. that's fraud.
TheTim27#0735: its just weird because is if use msi afterburner on a msi card it voids
pkkshadow#5844: what gpu do you have?
TheTim27#0735: rtx 2070
pkkshadow#5844: just be careful when you overclock it. you can void it by damaging throug... |
buildzoid#6254: NO ONE ELSE MAKES THE STUFF
4a61636b#5675: Read that wrong
crs#1873: just bought a vega 64 sapphire nitro+ and getting these values ouf of the box 😮 https://cdn.discordapp.com/attachments/305981966292090881/565532279758127131/Capture.PNG
crs#1873: just put them in and ran superposition at 4k without is... |
crs#1873: max i can squeeze out is 158x ish
ExtreemVin#1134: Try undervolting the core, it’ll run cooler and might boost higher
crs#1873: well, it is already undervolted
crs#1873: this is factory https://cdn.discordapp.com/attachments/305981966292090881/565659563920064523/Capture.PNG
richiec77#9494: https://forums.evga... |
Kim#9859: it pulls more wattage and amps than the power supply would support supposedly
Kim#9859: https://cdn.discordapp.com/attachments/305981966292090881/565738231778377761/unknown.png
Kim#9859: SSR-750FX
NuclearDebris#1984: 2 rx 580's and a i5 3570k shouldn't pull 750w
Kim#9859: but with 3 drives and 4 fans?
Nuclea... |
Kim#9859: yeah
Kim#9859: the amperage isn't a concern either?
Fitz#8200: watts = amp x voltage
Fitz#8200: 62 amp on the 12v rail is your 744w
Fitz#8200: unless you want to go into vrm efficiency, but I think you're fine
Kim#9859: https://cdn.discordapp.com/attachments/305981966292090881/565741353246392344/unknown.png
... |
Kim#9859: i thought CPU was on the 5v rail for some reason? lowering the CPU voltage in the calculator lowered load on the 5v rail so i think that's why
Fitz#8200: 12v
Kim#9859: that does make more sense, lol
Fitz#8200: it might draw a few watts from the 5, but those are generally for drives
Kim#9859: i used to know th... |
NuclearDebris#1984: Do we have a 3D focused mod anymore?
NuclearDebris#1984: I messaged Leeg, I'll let you guys know what he says
ZoroSeerus#0785: I've got a PNY Blower 1070ti here. Are there typical guidelines for adjusting voltage % increase? https://cdn.discordapp.com/attachments/305981966292090881/56601657748147404... |
I got an EVGA black that can benchmark at 2130 MHz core and 8300 MHz Ram
kanashimu#8494: Actual stable in game clocks are 1980-2085 and 8100 RAM
snaakey#6969: getting the exact same clocks on my 2080 ti lmao
The Destroyer of Worlds#8658: How close could a v56 sapphire pulse get to a v64 sapphire nitro+ with maxed oc an... |
Deleted User#0000: i mean my settings is fine but im not sure what to do with the core voltage part
Deleted User#0000: also im not sure if i even overclock more tho
Fitz#8200: if you max out the core voltage, you'll get like 15Mhz extra
Deleted User#0000: So should I max my core voltage?
Deleted User#0000: So is this f... |
The Destroyer of Worlds#8658: Ok, thx
Cold#0382: https://cdn.discordapp.com/attachments/305981966292090881/566441562905772032/GPU_Clock.PNG
Cold#0382: This is about as high as I can get my 1060
Cold#0382: With it being 100% stable
Cold#0382: I hit lottery? Prolly not but it stays like this and only hits 80 in Tomb Rai... |
Cold#0382: Its a PNY 1060 XLR8 OC
Cold#0382: 6GB
Fitz#8200: you shouldnt be hitting 80c unless that cooler is somehow worse than a blower
Betrayed#3582: If you hit 80C
Betrayed#3582: rip boost clocks
Cold#0382: Well i havent dusted sense i got it like 2 years ago because I dont have compressed air
Cold#0382: and i have... |
Cold#0382: so I think ill have enough airflow
Cold#0382: Like i said the only thing that is preventing me from moving it is because im broke and i dont have the money for a new PSU RN
Cold#0382: I legit have $0.90 in my paypal
Fitz#8200: you can use the old psu
Cold#0382: Im looking for a semi/full modular PSU
Fitz#820... |
Cold#0382: its not, id just like a fully/semi modular so I dont have to deal with a lot of cables
Cold#0382: and im planning on upgrading a lot
Cold#0382: RN its gonna be a 1060 6gb and R5 1600
Betrayed#3582: Go fully modular
Cold#0382: Thing is im broke
Cold#0382: and i dont got a job cause im a teen
Cold#0382: id hav... |
Fitz#8200: take a deep breath
Fitz#8200: pucker your lips
Fitz#8200: and exhale
Cold#0382: Honey ive tried
Cold#0382: lots
Fitz#8200: then you're fine
Fitz#8200: make an aggressive fan curve it the temps reach 70 while gaming
Cold#0382: https://cdn.discordapp.com/attachments/305981966292090881/566448170674946069/unkno... |
Cold#0382: USD
Betrayed#3582: fix your curve
Betrayed#3582: It should be a curve not stepping
Cold#0382: fixed
Cold#0382: but doesnt fix the thermal paste problem
Cold#0382: and i have a few things I need to repaste
Cold#0382: I have a 750 TI that hits 90C in like 2 seconds whenever i run Unigine Heaven
Cold#0382: and ... |
Specs
Ryzen 5 2600x
Gtx 1660Ti
16gb ram @3000mhz
Vyse#2356: just a quick question if this is gpu overclocking related: i installed a new gpu driver through nvidia geforce experience and went showering, when i came back my pc rebooted, so something must have crashed, but the newest driver was installed and everything wo... |
Betrayed#3582: Might only be the 2060
Cold#0382: Nah, the GTX 1060 Duals were white
Cold#0382: the new ones are black
Cold#0382: and there is nothing on the galax store for me
Cold#0382: so do i have to buy used or something?
Alcyone#2233: gigabyte makes a white pcb 2070 I think
DaGunzi#1241: with my v56 and morpheus i... |
DaGunzi#1241: how are your vrm temps or did you dremel the stock frontplate to fit or sth? 😄
IK4MS#7557: I don't have a VRM temp sensor
DaGunzi#1241: oh none at all? O.o
IK4MS#7557: Is it a ref V56?
DaGunzi#1241: yeah basically, pcie slot has been changed a bit
DaGunzi#1241: msi air boost
DaGunzi#1241: (which is why i... |
IK4MS#7557: but yeah, the hotspot sensor is a real issue that I haven't found how to fix myself
DaGunzi#1241: i think its just the hottest of all sensors on the chip
DaGunzi#1241: dont think there is a way to "fix" it
IK4MS#7557: That's one of the theories
DaGunzi#1241: i mean i assume thats what it is from the name :L... |
∫ntegral#0450: if you have a spare gpu, it's recoverable
∫ntegral#0450: even igpu
∫ntegral#0450: https://www.overclock.net/forum/69-nvidia/1706276-official-nvidia-rtx-2080-ti-owner-s-club.html
Keith#7858: hm
Keith#7858: thanks
∫ntegral#0450: according to this your 2080ti uses a reference pcb
∫ntegral#0450: so any bios ... |
ZoroSeerus#0785: so for undervolting do people usually have it flat to the right of the circle here because that's there highest stable frequency and they know it won't take above that? https://cdn.discordapp.com/attachments/305981966292090881/567014839612866590/unknown.png
DaGunzi#1241: yeah if you flatten it out to t... |
DaGunzi#1241: @TheDankPanda you are probably seeing it throttling down because the hotspot sensor is getting to hot (105-108°C!)
DaGunzi#1241: at least you can see on the screen that it is not in p7 state from the soc clock
BBG Vince#1824: Anyone around to join a call with me? im new to ocing and just had a few questio... |
Betrayed#3582: I doubt know of any that do
Betrayed#3582: and anyways the reported freq is always the same
Nutterin#0246: @BBG Vince got a bad overclocker
BBG Vince#1824: @Nutterin lol chill not for long
∫ntegral#0450: @TheDankPanda doesn't help that your hotspot is 105C
∫ntegral#0450: 🔥
TheDankPanda#8113: thank you a... |
Mickulty#1560: I dunno
Mickulty#1560: I think the armor has a frontplate for that stuff
Mickulty#1560: so should be fine in terms of component cooling
ahujet#5245: plate that can be reused for accelero xtreme iv?
Mickulty#1560: I *think* so
Mickulty#1560: should be the same principle as the 1080ti and accelero III http... |
Mickulty#1560: I guess it might improve mechanical support
ahujet#5245: while we're at it, do these 1080s need liquid metal shorting to unlock full voltage and stuff. I remember seeing that to be the case with FE edition, is it different with aftermarket ones?
Mickulty#1560: it's one way to expand the power limit, whic... |
ahujet#5245: and how much does the shunt mod increase the limit to?
Mickulty#1560: windforce is gigabyte's low-end brand these days
Mickulty#1560: the 1080 "xtreme gaming" has a 375W limit
Betrayed#3582: shunt mod doesn't allow you to increase the limit
Betrayed#3582: It just makes the card think its not hitting the li... |
Mickulty#1560: yeah not really for daily
ahujet#5245: can't you just flash bios with higher power limit to increase it? Or like edit vbios with editor to increase it? or is it amd thing?
Mickulty#1560: it depends, some cards are cross-compatible, some aren't
Betrayed#3582: You can't edit the bios on pascal
Betrayed#358... |
Betrayed#3582: yeah they do
Betrayed#3582: eventually someone might crack it, but they haven't yet
OA#0069: i only have one 8pin to power my 1080 windforce
OA#0069: is i even worth trying to use a higher power limit bios?
Betrayed#3582: no
Nory#0305: 'binning' per @Deleted User https://cdn.discordapp.com/attachments/30... |
buildzoid#6254: whoi use linux
∫ntegral#0450: well it doesn't work on 18.12.3
∫ntegral#0450: time to update
bardacuda#8486: eliovp? yes definitely made for miners
∫ntegral#0450: doesn't seem to work for me https://cdn.discordapp.com/attachments/305981966292090881/567606955498143747/unknown.png
bardacuda#8486: does it m... |
bardacuda#8486: @∫ntegral https://bitcointalk.org/index.php?topic=5123724.msg50620381#msg50620381
bardacuda#8486: it sets the timings for whatever is the current active memory state
∫ntegral#0450: the thing is, i idle at 2000MHz
bardacuda#8486: right so it should have worked since your state didn't change
bardacuda#848... |
Mickulty#1560: they don;t produce heat
Mickulty#1560: but yeah, that
Mickulty#1560: they may get in the way
ahujet#5245: oh. and what are those smaller ones then on r9 290? https://cdn.discordapp.com/attachments/305981966292090881/567743691482202112/LL.png
buildzoid#6254: still mosfers
LightningManGTS#0001: Caps techni... |
chriiiiiiiiiiiiiiiiiss#2347: do i have to oc the core with the shader clock?
chriiiiiiiiiiiiiiiiiss#2347: usualy the shader is automaticly overclocked when i overclock the core
chriiiiiiiiiiiiiiiiiss#2347: ok the card is f****d up, at clocks it ran just fine 3 days ago it now directly crashes :C
Rave#7710: @∫ntegral th... |
DaGunzi#1241: also maybe one can loosen timings and get even higher raw freq 😄
DaGunzi#1241: ah what a pity
∫ntegral#0450: nah, amd gpus are limited by their memory controller
DaGunzi#1241: but v56/64 should have the same memory controller right?
DaGunzi#1241: (even though memory voltage would stay at 1.25v with v56 b... |
∫ntegral#0450: i usually do heaven because it's pretty consistent
∫ntegral#0450: ofc, until i crash and performance at the same settings is worse
∫ntegral#0450: so i have to restart
DaGunzi#1241: yeah neat
DaGunzi#1241: just afraid that most benches dont use that much memory
∫ntegral#0450: true
∫ntegral#0450: there's a... |
Fitz#8200: voltage limit because that's what gpu boost hits first
SardonicSeal#4222: OCing a Vega56, given if thermals are in check, is there a wattage that I want to stay under with this card?
DaGunzi#1241: as long as you stay under 80°C and 1.25v everything should be fine
SardonicSeal#4222: 80*C!? I thought the card ... |
4a61636b#5675: I dont think you should take the cooler off a Vega without knowing what the interposer is 🔥
NuclearDebris#1984: If you manage to delid a Vega, ill be impressed
NuclearDebris#1984: Figuring it doesnt have an ihs
NuclearDebris#1984: You would be decoreing it
Deleted User#0000: Yeah dont do anything overze... |
Justifiedparanoia#4764: @Kepler Experience ?
Justifiedparanoia#4764: planning on a benching run over easter
∫ntegral#0450: @Rac you can try using the voltage frequency curve to squeeze out a bit more performance
Rac#5224: @∫ntegral ok is that the percentage slider? https://cdn.discordapp.com/attachments/305981966292090... |
Betrayed#3582: find the voltage point you want
Rac#5224: What might that be
Betrayed#3582: 🤷
Betrayed#3582: Never really messed around with the curve
Rac#5224: @∫ntegral
∫ntegral#0450: well are you power throttling?
Rac#5224: Well I’m artifacting at 210
Rac#5224: So probably
∫ntegral#0450: because if you're close to t... |
∫ntegral#0450: which will throttle your clocks
Rac#5224: Ah ok
∫ntegral#0450: so the gains might be negated
Rac#5224: Can I at least turn it up a bit
∫ntegral#0450: worth a try
∫ntegral#0450: check in hwinfo what the TDP % is
Rac#5224: How do I do it then?
Rac#5224: Under load?
∫ntegral#0450: yeah
∫ntegral#0450: if you... |
Rac#5224: How can I lock?
∫ntegral#0450: well the easiest way is to set a flat v/f curve
∫ntegral#0450: you set the core clock offset as low as you can
∫ntegral#0450: hit apply
∫ntegral#0450: then hit ctrl f
∫ntegral#0450: find the 1000mV point
∫ntegral#0450: drag that up to 2025 or something
∫ntegral#0450: hit apply, ... |
∫ntegral#0450: before or after?
Rac#5224: After
∫ntegral#0450: well you did something wrong
Rac#5224: Well that’s it after I changed it
Rac#5224: What’ve I done wrong
∫ntegral#0450: looks like you've shift-dragged the curve
Rac#5224: Why?
∫ntegral#0450: the green curve is the default
∫ntegral#0450: every point looks li... |
drag that up to 2025 or something
hit apply, and it should go flat
````∫ntegral - 19-04-2019 09:56 | #gpu-overclocking`
∫ntegral#0450: did you follow these instructions?
Rac#5224: I’ll do it again 1 min
Rac#5224: @∫ntegral like this but I drag all the others up to the right? https://cdn.discordapp.com/attachments/30598... |
∫ntegral#0450: now you should be at 2025MHz 1v
Rac#5224: Yep
∫ntegral#0450: it'll let you push the core clock a bit more
∫ntegral#0450: since you're not as close to the power limit
Rac#5224: On my core rn it says
Rac#5224: ‘Curve’
Rac#5224: Do I leave that alone?
Betrayed#3582: yes
∫ntegral#0450: that's normal
Betrayed... |
Rac#5224: Nvm
Rac#5224: I was at 2050
∫ntegral#0450: well you can still try a bit more voltage
∫ntegral#0450: you also don't need to tag me for every other message
∫ntegral#0450: the point is to get as high a frequency as possible without hitting the power limit
Rac#5224: What does that do
∫ntegral#0450: voltage?
Rac#5... |
∫ntegral#0450: what voltage?
Skronex#5251: any real advantages to updating gpu bios?
Betrayed#3582: You can update your GPU BIOS?
Skronex#5251: yessir
Betrayed#3582: What company updates their GPU BIOS :ThinkCrash:
Skronex#5251: All of them
Skronex#5251: I believe
Betrayed#3582: My strix 1080 has an XOC BIOS
Betrayed#3... |
Skronex#5251: so far an extra 100mhz
Skronex#5251: 2160
Rac#5224: @∫ntegral wowwwww
Rac#5224: Sorry for ignoring didn’t see
Rac#5224: But I think I’m on to a really good score here
∫ntegral#0450: 👍
Rac#5224: @∫ntegral really confused tbh
Rac#5224: Think I am RAM bottlenecked a bit
Rac#5224: Only getting 96% gpu utilis... |
Rac#5224: Will do it in the morning
Rac#5224: Ty for the help man xoxo
∫ntegral#0450: np 👍
eman#9684: https://cdn.discordapp.com/attachments/305981966292090881/568609722945503254/unknown.png
eman#9684: how should i go for memory OC
eman#9684: just go till i get errors or crash?
∫ntegral#0450: do you idle at 2200MHz?
... |
∫ntegral#0450: https://cdn.discordapp.com/attachments/305981966292090881/568627600314859520/unknown.png
∫ntegral#0450: well then
∫ntegral#0450: that was too tight
adi769#6854: only 4 million errors? :AlzaFace:
∫ntegral#0450: it went to 11 million before i restarted
OA#0069: What program is that
4a61636b#5675: Believe ... |
Atria#9870: most likely yes, the backplate tends to soak heat
Brilliantix#7893: the backplate gets so hot you even burn your fingers on it with my 1080 from Zotac that was not that extreme
Brilliantix#7893: I hope that does not blow
Rac#5224: How do you raise gpu power limit
Rac#5224: Huh
kostaxr#9448: can someone help... |
kostaxr#9448: i have also tried furmark
kostaxr#9448: same thing
bardacuda#8486: try something other than those 2
buildzoid#6254: yeah most modern GPUs throttle under those 2
buildzoid#6254: because they are teh same thing
buildzoid#6254: kombustor is a furmark reskin
kostaxr#9448: oh
kostaxr#9448: so my gpu is fine?
b... |
kostaxr#9448: nope
kostaxr#9448: still not reaching stock clock
kostaxr#9448: its hitting the power limit @buildzoid
bardacuda#8486: can you raise the power limit?
buildzoid#6254: what model card did you buy?
kostaxr#9448: Rx 480 Sapphire Nitro +
bardacuda#8486: you should be able to put +20% without any bios fuckery
b... |
kostaxr#9448: that has a 6pin
kostaxr#9448: my card has an 8pin pcie @bardacuda
kostaxr#9448: it just maxed out the stock TDP
bardacuda#8486: Right so it might only be pulling half of the needed power from the 8 pin and the other half through the slot
kostaxr#9448: but it was dropping clocks
bardacuda#8486: I'd be conc... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.