data stringlengths 14 24.3k |
|---|
kostaxr#9448: even on reference cards
bardacuda#8486: It shouldn't
bardacuda#8486: Ok well if it's been fixed then good
bardacuda#8486: Just thought I'd give a heads up
bardacuda#8486: Seen some horror stories in the mining community with burnt motherboards and stuff
kostaxr#9448: and that only happened on reference ca... |
bardacuda#8486: Same here
bardacuda#8486: I'm using a degraded 290 atm lol
kostaxr#9448: ?
kostaxr#9448: what happened?
bardacuda#8486: It has a shitty asic quality chip and had a hard life in the mines. I am going to add some capacitors and hope it's just the existing caps are worn out a bit and not the core itself th... |
bardacuda#8486: I think the stock power limit should have been higher or the voltage should have been lower
kostaxr#9448: like when one monitor is in the card draws about 8-15 W
kostaxr#9448: when the second comes in it goes up to 30W
buildzoid#6254: more power draw under multi monitor is normal
kostaxr#9448: ok
Nuclea... |
kostaxr#9448: right
kostaxr#9448: it doesnt get alot over the TDP
kostaxr#9448: only like 6-8W
Valkrys#8394: Yeah 400 series has a "bug" that forces mem to stay locked at p0 for dual monitors. That's why your idle seems high.
Valkrys#8394: Flashing a 580 bios to it will fix that.
kostaxr#9448: nahhh
kostaxr#9448: i am ... |
Rac#5224: @Valkrys
Rac#5224: Do you have any idea how to change the power limit in flash bios
Rac#5224: For a 2080
Valkrys#8394: Can't on pascal and Turing.
Rac#5224: Damn
Valkrys#8394: Bioses are locked.
Rac#5224: So I can’t get above 111% power limit
Valkrys#8394: Only way is to get a bios that already has a higher p... |
Valkrys#8394: And then use whatever flashing tool is required for Nvidia gpus. Not sure what they use off hand. I know a lot of people did it on 1080ti's using the Asus strix bios for an extra bump in power limit.
Valkrys#8394: It's honestly not worth it unless you're water cooled and trying to get hwbot points though.... |
∫ntegral#0450: https://cdn.discordapp.com/attachments/305981966292090881/568940878404780032/bios.rom
∫ntegral#0450: @Valkrys
Valkrys#8394: You ping me the moment i walk out to smoke.
Valkrys#8394: Gimme 5 minutes
Valkrys#8394: @∫ntegral I think you might have flipped your samsung and hynix timings.
Valkrys#8394: Sorry... |
Valkrys#8394: Give that a try
∫ntegral#0450: it's a nitro+ 570 4gb
Valkrys#8394: Ahhh, that explains the default memory clocks
Valkrys#8394: Yeah give that a try, don't fuck with power slider for the time being. I went ahead and loosened those a hair
Valkrys#8394: Upped TDP from 150 to 180, TDA from 150 to 200, and Max... |
VRAM_Info
1625MHz to 2000MHz straps uses modified 1500MHz timings
tRCDW(A) = 14
tRCDR(A) = 20
TRRD = 5
tCL = 16
tR2W = 23
tW2R = 10
TFAW = 0
T32AW = 0
ACTRD = 16
RASMACTRD = 50 |
RASMACTRD = 60
VoltageObjectInfo
25.8% LLS
1050mV VDDCI
ASIC_ProfilingInfo
1300mV max
PowerPlay
150W TDP
150A TDC
225W max power limit
```
∫ntegral#0450: i also have a few other timings i've changed |
Valkrys#8394: Since you have a bios that has both samsung and hynix timings available on it
∫ntegral#0450: elpida*
Valkrys#8394: Orly?
∫ntegral#0450: https://cdn.discordapp.com/attachments/305981966292090881/568965446267568147/unknown.png
Valkrys#8394: Because the bios editor recognizes both samsung and hynix
Valkrys#... |
eman#9684: And shit I was in the wrong channel my bad guys XD
pkkshadow#5844: it's fine :p
eman#9684: What's it called again overdriveNT
eman#9684: It seems my card is locked at 1.2
pkkshadow#5844: <https://forums.guru3d.com/threads/overdriventool-tool-for-amd-gpus.416116/>
eman#9684: Albeit I did buy the card used so ... |
∫ntegral#0450: pretty normal for voltage to be limited
∫ntegral#0450: mine is limited to 1150mV
∫ntegral#0450: with msi ab or trixx, you can set an offset voltage
∫ntegral#0450: 1150mV + 100mV = 1250mV
eman#9684: Oo
eman#9684: Oo
pkkshadow#5844: with sapphire you can hex edit it to go further if you wanted to, but that... |
eman#9684: yeah the bios was modified https://cdn.discordapp.com/attachments/305981966292090881/569067989996011532/flash.gif
eman#9684: mining card
eman#9684: default clocks are in now
Justifiedparanoia#4764: yo, anyone else had an error recently with installing 3dmark? seems to be stuck at 72% trying to install sysinf... |
Kim#9859: i'll check the PCIe part when i take it out next, i'll change the display cable though (HDMI)
∫ntegral#0450: i've had that happen a few times
∫ntegral#0450: usually scrolling will fix it
∫ntegral#0450: happened in chrome when i was watching youtube
∫ntegral#0450: for some reason CL18 = 1 million+ errors
∫nteg... |
Kim#9859: if i learn how, that is
Kim#9859: sorry, it's 3 AM, i probably shouldn't be talking about this stuff, lol
banzai#0196: hm 2010-2025mhz is somewhat low for a watercooled 2080ti chip, isnt it?
The Blackhat#5224: @∫ntegral what was that tool for checking GPU VRAM bandwidth?
The Blackhat#5224: Odd, my 290X used t... |
pkkshadow#5844: 19.4.x or something is newest
pkkshadow#5844: 19.2.2 is what i use, and haven't had problem with plugging in monitors or unplugging them.
Joss#5084: I have this issue since I got the new monitor
Joss#5084: Back then with lower resolutions the clocks were stable
pkkshadow#5844: you haven't overclocked th... |
Joss#5084: http://gpuz.techpowerup.com/19/04/21/ffx.png
Joss#5084: @pkkshadow
pkkshadow#5844: 1268~ isn't a low clock for rx 470/570. some cards are that at stock.
pkkshadow#5844: as my card defaults to 1250 for core and 1650 for mem
Joss#5084: well I have the msi armor one
Joss#5084: this a little more detailed https:... |
pkkshadow#5844: nice
Justifiedparanoia#4764: yus, 780ti stable at 1300 core 4k mem. 😃
pkkshadow#5844: nicee
Justifiedparanoia#4764: yeah
Justifiedparanoia#4764: skynet bios, locked to 1.2v.
Justifiedparanoia#4764: wondering if i cant get a bit more of it out with some new voltage limits though, or some hard modding.
p... |
i have caps, but no card to mod 😂
Justifiedparanoia#4764: i need to go get me a soldering iron and multimeter first me thinks
Justifiedparanoia#4764: https://hwbot.org/submission/3717750_justifiedparanoia_3dmark___cloud_gate_radeon_r9_290x_41290_marks
Justifiedparanoia#4764: my 290x did so much better, even on a 1800x... |
pkkshadow#5844: it does. and you might have to mod bios if the card has hynix and the vram is samsung
pkkshadow#5844: or something like that.
and yeah, cap mods are easy to do.
pkkshadow#5844: check #hardware-modding and #mod-reference
Justifiedparanoia#4764: cap mods yeah, ive done soldering before, i just dont want t... |
∫ntegral#0450: well on amd it has always helped
∫ntegral#0450: it's way more beneficial than core
∫ntegral#0450: with good timings, you can get performance equivalent to a 20-40MHz core clock increase
∫ntegral#0450: https://i.imgur.com/VxUAfjK.jpg
∫ntegral#0450: stock 570: https://i.redd.it/zpupli0g22t21.png
∫ntegral#0... |
∫ntegral#0450: you can drag the bios file into the command prompt and it'll type the path of the bios for you
Resune#9806: big thing I'm curious about is how much i actually need to increase my power target
Resune#9806: the power limit is 160.3W in my bios, TDP is 250W
Resune#9806: 75W out of PCI-E, 79.5W out of PSU PE... |
∫ntegral#0450: i think he has 8 pins
∫ntegral#0450: he has an 8 and a 6 pin power connector
∫ntegral#0450: i looked on google, and a 6 pin can apparently handle as much power as an 8 pin
Resune#9806: so 6 pins can handle 160W?
∫ntegral#0450: i think so
∫ntegral#0450: https://allpinouts.org/pinouts/connectors/power_supp... |
Resune#9806: well, what happens if your power limit is higher than what the rails and pcie can provide?
Resune#9806: does it overpull from the rails and pcie? or just crash
Resune#9806: Also, is disabling gpu boost and having constant voltage and core clock bad for it or is it like a CPU in that as load goes down watta... |
bardacuda#8486: But to be safe yeah you could limit to 150W or so
bardacuda#8486: Oh sorry misread..you were talking about grounds yeah
Kim#9859: @Justifiedparanoia glad you got it fixed, I would have helped if i was awake
finegorko#2416: How much does overclocking of a video card affect its performance?
Fitz#8200: Dep... |
Rac#5224: 68
Rac#5224: -
Rac#5224: 72
∫ntegral#0450: what clocks are you hitting?
Rac#5224: 2025 at 1.043v
Rac#5224: mv*
∫ntegral#0450: i wouldn't bother
∫ntegral#0450: your temps are kinda high for a higher power limit to do anything
Rac#5224: damn
Rac#5224: isn't throttling at 82 tho
∫ntegral#0450: higher power limit... |
buildzoid#6254: the card will either boost harder and get warmer
buildzoid#6254: or it won't boost more
buildzoid#6254: and stay the same temp
buildzoid#6254: the boost algo isn't retarded
buildzoid#6254: it's not gonna burn more power to achieve nothing
buildzoid#6254: there's no reason to not max the power limit on m... |
Resune#9806: but that's to be expected i guess
Resune#9806: my 970 has a decent boost table in the bios https://cdn.discordapp.com/attachments/305981966292090881/570039116704645120/970_clocks.PNG
Resune#9806: I can't remember how to do it, but how do i make a copy of the bios currently on my GPU?
Betrayed#3582: gpu-z
B... |
∫ntegral#0450: :riotping:
∫ntegral#0450: @Rac you find a compatible bios
∫ntegral#0450: you get the modded nvflash that bypasses all the checks
Resune#9806: do you have to have nvflash that bypasses all the checks?
∫ntegral#0450: https://www.overclock.net/forum/71-nvidia-drivers-overclocking-software/1521334-official-n... |
∫ntegral#0450: try `nvflash -6 bios.rom`
Resune#9806: i did Shift right click in the folder to try to open up command prompt but there's no command prompt option just windows powershell
∫ntegral#0450: yeah they removed that option
Resune#9806: Yeah, what should I do?
∫ntegral#0450: just open a cmd as admin
Resune#9806:... |
∫ntegral#0450: it should be in the correct folder
∫ntegral#0450: don't need to do cd again
Resune#9806: okay I'm in the folder now
∫ntegral#0450: then just type `nvflash -6 bios.rom`
∫ntegral#0450: where bios.rom is the name of your bios
Resune#9806: okay
Resune#9806: https://cdn.discordapp.com/attachments/30598196629... |
Resune#9806: looks good?
∫ntegral#0450: yeah
∫ntegral#0450: https://www.overclock.net/photopost/data/1293138/f/ff/fffa7ccf_Capture.PNG
Resune#9806: https://cdn.discordapp.com/attachments/305981966292090881/570056915648774147/uhhdiditgowell..PNG
Resune#9806: success?
Resune#9806: guess I'll know if i restart
Resune#980... |
Resune#9806: It’s working fine, now what the hell do I do about my msi afterburner
Resune#9806: https://cdn.discordapp.com/attachments/305981966292090881/570059812562534400/questionmark.PNG
Resune#9806: it uh.. doesn't know anything
Resune#9806: is it a simple case of uninstall and reinstall?
∫ntegral#0450: i think yo... |
Resune#9806: thanks integral
Resune#9806: helped me OC each part of my PC at this point 😄
Resune#9806: Whoa this card is an animal I’m at 1562mhz 1.206v... and as I type this valley crashes lol
lord tachanka#2164: is unigine heaven extreme not utilizing 100% gpu normal?
Resune#9806: is it utilizing 99%?
Resune#9806: 9... |
Resune#9806: is that normal for the vcore sensor?
∫ntegral#0450: i know on pascal, it's 12.5mV steps
Resune#9806: I just don't wanna give my GPU more than 1.25v like you said
Resune#9806: with how inaccurate it is, it's kinda hard
Resune#9806: Okay yeah, +35mv = 1.256v and +30 = 1.231v
Resune#9806: looks like it's in 2... |
Resune#9806: highest I seen it draw was 197W
∫ntegral#0450: should be fine
Resune#9806: max voltage in bios is 1.287v
Resune#9806: welp, gotta start testing game stability
Resune#9806: what do you think i should aim for, for memory OC?
Resune#9806: right now I'm +100 on core and 200 on mem (1568 core and 7.8ghz mem) ef... |
Resune#9806: should i try to hit 1600mhz?
Resune#9806: screw it, lets make it crash
Resune#9806: lol, hit 1607mhz, was starting to stutter, no artifacts though
Resune#9806: if i pumped just a tiny bit more voltage in it I'm sure it could be stable 1600mhz 8 ghz mem
Fitz#8200: on my 1070ti, I'd get stutters in benchmark... |
Kim#9859: not that i can find 😦
Resune#9806: https://hwbot.org/hardware/videocards#key=geforce_gtx_970 this is all i can find
Resune#9806: @∫ntegral have you ever had your screen turn blue in overwatch testing an OC?
∫ntegral#0450: i always use benchmarks to test my oc before playing games
∫ntegral#0450: so no
∫ntegra... |
Resune#9806: 210.3W actually
Resune#9806: with kombustor seems like there's a ton of vdroop
Kim#9859: hm
Kim#9859: i use Heaven for artifact testing and just general performance, but do other tests (like 3DMark) to make sure it's stable
Resune#9806: voltage hangs around 1.1v which is insane cause I have +50 on the offs... |
∫ntegral#0450: idk it could just be an nvidia thing
Resune#9806: creating immense vdroop
∫ntegral#0450: i usually do 10 mins of it and if it passes with no artifacts it's stable in ow
Resune#9806: my vcore on my GPU is like 1.1v in kombustor
∫ntegral#0450: it's not that much hotter on 570 compared to firestrike
Resune#... |
∫ntegral#0450: it works fine on my 570
Resune#9806: my gpu's pulling about 190W
Resune#9806: the vdroop is unbearable
Resune#9806: idk what's causing it
Resune#9806: i don't have any of that vdroop in games
Resune#9806: I do a bit in Overwatch, my gpu downclocks a bit and i see my voltage come down a bit
Resune#9806: m... |
Battlefield_Ace#9175: @GCN Experience ok, so im currenly testing my 580 (stock 1411/2000@1.150 vcore) with an undervolt/oc for the summer months, cause what i was running before gets too loud for my liking with the increased ambient (1500/2100 with modded timings@1.225v vcore). im not finished testing, but right now 14... |
∫ntegral#0450: probs been mined on
∫ntegral#0450: so it's definitely performing worse than average
Battlefield_Ace#9175: afaik all 570s come with a lower stock clock than same product line 580s
Battlefield_Ace#9175: also update: 1475 crashed at 1.1v. 1450 passed superpos. 1080p med&ext, time spy and firestrike. time to... |
Battlefield_Ace#9175: ikr. sitting at 25c right now. and its 2 in the morning. and raining.
Resune#9806: yup, same here
Resune#9806: except 8pm and not raining
Battlefield_Ace#9175: so for the summer ill now be running undervolt+moderate oc, and for the winter i can run overvolt+more oc. technically i can run ov+oc all... |
Betrayed#3582: or something
Betrayed#3582: Which is like doubled stock
Fitz#8200: "cold 2080ti"
Betrayed#3582: yeah cold 2080ti while drawing double of his
Betrayed#3582: 120mm should be able to do sub 60C if the fan isn't ass
Betrayed#3582: from what I'm seen
Fitz#8200: I doubt the kp will stay under 50C with the 240,... |
Betrayed#3582: probably
Betrayed#3582: Why change what "works"
Fitz#8200: I thought 4.0 is a more fine tuned version of 3.0
Betrayed#3582: Its Nvidia
Ant_IV#4437: evga shipped the hybrid kit with a 120mm
Ant_IV#4437: fucking sucks, wish it was a 240mm
Ant_IV#4437: as for the fan its in push pull confirm
Ant_IV#4437: th... |
Ant_IV#4437: ok cool
Ant_IV#4437: any reason to undervolt below 0.950v
Ant_IV#4437: im steady around 1950-1980 at 0.950 right now
Betrayed#3582: if it works
Betrayed#3582: no
Ant_IV#4437: its late but i have to figure out my cooling
Ant_IV#4437: this GPU should be in the low to mid 60s
Ant_IV#4437: not upper 60s when u... |
seraphiin#1339: Hey guys, quick question regarding fan curve. The default fan curve for my card appears to include the fans being stopped completely if under 45c or so, would it be in my interest to make a curve where they never shut off or is it not a big deal?
Resune#9806: Some cards you can't go below a certain valu... |
engmia#8220: No worries @seraphiin enjoy tweaking that curve
engmia#8220: @adi769 Ah yeah agreed, it's right on the wall
engmia#8220: What is your cooling that you get 70C on water and 1.35V though? Is it AIO? That's about how much I get with air
adi769#6854: 240mm HWLabs GTR 240 with two noctua redux P12 1700rpm
adi76... |
Resune#9806: check your settings
Keith#7858: ya
Keith#7858: 4.6.0.14820
Keith#7858: any feedback on the flashing a non-a 12% limited 2080ti to the palit 24%?
Keith#7858: currently undervolting my 12% to .950 getting about 1875 steady, wondering if there will be worthwhile improvement
Ant_IV#4437: It hasn’t said there i... |
Ant_IV#4437: when u do u should see fan1 fan2 ONLY if you are NOT an EVGA card/bios
Ant_IV#4437: https://cdn.discordapp.com/attachments/305981966292090881/570748171152523274/unknown.png
Keith#7858: oh i dont have that option on mine
Keith#7858: im on a nona
Keith#7858: galax 380, drool
maxey#7054: https://cdn.discord... |
Ant_IV#4437: ok so let me show u the FAN issue i need to figure out
Ant_IV#4437: who here has been using the new two fan speed controls?
Keith#7858: yea i dont have that double option on my evga
Keith#7858: kk
Ant_IV#4437: oh
Keith#7858: btw in msi, when u pick unlock voltage, which dropdown do you pick
Keith#7858: in ... |
lord tachanka#2164: is there any way to directly control voltage on turing cards?
Battlefield_Ace#9175: not afaik
lord tachanka#2164: rip
Fitz#8200: normalized is based off the 100% being stock before you increase it in afterburner, regular (in terms of hwinfo) means if you have a +20%, the number is based off the 120%... |
buildzoid#6254: don't RX 580 BIOSs take care of the cold slow?
Rave#7710: I've just been using the stock one w/ mods, ofcourse I haven't taken the card cold so have no idea how that works
Rave#7710: I do recall trying the elmor air bios though and it does work on the strix
whiteshark#1560: including the voltage control... |
Rave#7710: https://imgur.com/a/37MZvrL
whiteshark#1560: jesus could have made them bigger
whiteshark#1560: the right side is measure points?
Rave#7710: yeah
Rave#7710: also yeah apologies for shitty pics + photoshop work 😆
whiteshark#1560: pff thats waaaaaaaay cleaner then what i do
Cowwan#0335: Does this sound like I... |
buildzoid#6254: yeah should be 290X
4a61636b#5675: What would be a good price for one of these?
4a61636b#5675: 'Untested', no BP, and the guy doesn't know what it is
NuclearDebris#1984: The mounting pattern alone proves its a 290x
4a61636b#5675: I won't lie, I was hoping it was one of those unicorn 780tis. Shame they o... |
4a61636b#5675: Is that gdie?
guardian_six#5058: Also, pictures
guardian_six#5058: @4a61636b ?, I was talking about the VRM.
4a61636b#5675: I'm looking at the ram
guardian_six#5058: oh
guardian_six#5058: I have no idea tbh, haven't looked up data sheets for the actual ICs, since I don't know what to look for.
guardian_s... |
guardian_six#5058: that makes more sense
guardian_six#5058: I'll try higher Vcore when testing Memory OC. Now that I think about it, I only have Vcore at around 1.15
guardian_six#5058: pretty sure it can handle 1.3 on the stock cooler tho
Mickulty#1560: probably? I bet they scale with cooling though
guardian_six#5058:... |
Cowwan#0335: Yeah, never used it myself, but it looks like what you'd want.
Cowwan#0335: I've been using MSI afterburner, but that's just the MSI equivalent to your Asus
Cowwan#0335: I'd also grab something to test stability with. Unigine heaven or Unigine superposition is free
Prewn#0617: yeah, the guy I am watching t... |
Cowwan#0335: Also, which version of a card you have will effect your stock clocks. Like, I have a Sapphire Fury Nitro that runs at 1050mhz core clock, while the "reference" card would run at 1000mhz
Cowwan#0335: I think that's a stress test software, but I've never used it so you don't really need it.
Cowwan#0335: but ... |
Cowwan#0335: My fury, for example, will run through firestrike flawlessly while basically crashing in some games
Cowwan#0335: yeah
Prewn#0617: noice
Cowwan#0335: This is all just settings, as long as you don't go too extreme it can be undone.
Cowwan#0335: Like, voltage can cause damage, and you can brick a card with bi... |
Prewn#0617: gonna start stress test and all that now
Prewn#0617: "performance" or "stress"?
Prewn#0617: @Cowwan
Cowwan#0335: I guess stress, I've never actually used superposition.
Prewn#0617: please upgrade to premium to get full access
Prewn#0617: hahahaha
Cowwan#0335: Then performance
Prewn#0617: 1080p medium?
Cauti... |
Cowwan#0335: Low fps is fine
Cautilus#5912: the fps doesn't really matter
Prewn#0617: input lag tho?
Cowwan#0335: you just want to push your gpu hard
Prewn#0617: ok
Cautilus#5912: the whole point is to see if your OC is stable
Cowwan#0335: ^
Prewn#0617: pretty sure my GPU didnt like it
Prewn#0617: 64 degrees celcius
Co... |
Cautilus#5912: these things are spec'd to run by default up to 84C
Prewn#0617: okay, I increase the core clock by 40 now
Cowwan#0335: Core clock is when weirdness should crop up, that and memory clock
Prewn#0617: here's a ss of the things
Prewn#0617: https://cdn.discordapp.com/attachments/305981966292090881/5710461359... |
Cautilus#5912: 140, go again
Cowwan#0335: The whole process is just setting clocks and testing, if it works, go up, if it doesn't go down
Cowwan#0335: when you're done go down a bit just for stability
Prewn#0617: cant launch, it freeze in the loading screen
Prewn#0617: 120 yah
Prewn#0617: 120 is fine
Prewn#0617: no cra... |
Cowwan#0335: Even with my terrible bad idea stuff, it takes a few minutes to get unstable
Cowwan#0335: Also, if you can, test with multiple games and benchmarks. This card was stable at higher clocks in a different benchmark, in catzilla it was a complete mess. https://cdn.discordapp.com/attachments/305981966292090881/... |
Prewn#0617: wut
Prewn#0617: I've been there for 10 min, no stutters, no bugs, no nothing
Prewn#0617: I didn't fully get that part with cold and the benchmark starts
Fitz#8200: Nvidia cards self overclock to a higher freq when they're cold, and dont boost when they're hot. If you overclock as a benchmark is running, you... |
Prewn#0617: how do I check? Turn of PC, wait few minutes and again?
Fitz#8200: Can leave the pc on, just wait for temps to get in the 30s or low 40s
Prewn#0617: okay, turn fan speed up or down for quicker effect?
Fitz#8200: Up, but shouldn't matter
Prewn#0617: ok
Prewn#0617: so like 30-35?
Fitz#8200: Anything below 45
... |
Prewn#0617: https://cdn.discordapp.com/attachments/305981966292090881/571058925424738314/Capture.PNG
Fitz#8200: Should be around 2000ish
Fitz#8200: 1582 is idle. What does it go to during a bench?
Prewn#0617: one sec
Fitz#8200: Also max power and temp
Cowwan#0335: The stuff on the left has the current clocks, and the ... |
Cowwan#0335: and then you can see where it is over time
Fitz#8200: He can find the clock graph and hover over the max
Prewn#0617: ?
Cowwan#0335: you see where you have a line for tempurature?
there's like 50 graphs in there if you scroll down
Prewn#0617: which one?
Prewn#0617: should I go to*
Cowwan#0335: core clock
Co... |
Cowwan#0335: I don't have any experience with nvidia cards
Prewn#0617: is it allowed to tag him so I can ask him?
Prewn#0617: yeah, when I hover over it it shifts between 1900-1990
Prewn#0617: while in benchmarkj
Fitz#8200: If +110 works cold, then leave as is imo
Prewn#0617: okay!
Prewn#0617: so I'm done OCing?
Prewn#... |
Keith#7858: lots of factors tho
Keith#7858: doesnt mean its shit
guardian_six#5058: Anyone here familiar with Terascale 2 memory controllers? My HD 5450 VRAM does not seem to like having the core run at higher Vcore. Trying to understand how this is working. GPU temps aren't too high as is, but does anyone think the c... |
Cowwan#0335: I think I actually bought them from a link in that post lol
LagEND#6073: Hey everyone! I have a gt1030 card on my pc and i do a little overclock and when i play ac:origin it get blurry little bit, is it bad?
Betrayed#3582: did you disable motion blur and depth of field
guardian_six#5058: @Cowwan I am talk... |
lord tachanka#2164: how is 2100/8420 for a 2080 on stock cooler
banzai#0196: good
banzai#0196: from what I know
banzai#0196: what is considered a good oc for 2080 ti watercooled?
4a61636b#5675: @GCN Experience What are safe Hawaii voltages on air/ max safe temp?
buildzoid#6254: 1.35 daily if you can cool it
Deleted Use... |
Mickulty#1560: **TL;DR how to overclock your Pascal/Turing**
-Install and run MSI Afterburner
-Max power and voltage limit sliders (the voltage slider on Pascal/Turing unlocks more, higher boost states - it doesn't increase voltage at a set speed)
-It may help to set up a more aggressive fan curve
-Increase memory clo... |
whiteshark#1560: :>
whiteshark#1560: figured
whiteshark#1560: the ln2 version doesnt i would hope?
Rave#7710: No idea, haven't tried it since it sounds scary
Rave#7710: One way to get around the ovp is to use voltage offsets, which vrmtool lets you set direct voltage and offset at the same time
Rave#7710: So you can se... |
Battlefield_Ace#9175: 1.2
Resune#9806: @Ant_IV TL;DR how to overclock your Pascal/Turing
-Install and run MSI Afterburner
-Max power and voltage limit sliders (the voltage slider on Pascal/Turing unlocks more, higher boost states - it doesn't increase voltage at a set speed)
-It may help to set up a more aggressive fa... |
Resune#9806: i could get my core up to 1600mhz if I did another power mod on my 970 😬
Resune#9806: stable that is
Ant_IV#4437: basic free DL is fine or "get extended editions"?
Resune#9806: free dl should be fine
Ant_IV#4437: k
Ant_IV#4437: 1.2gb so DL for a bit
∫ntegral#0450: https://cdn.discordapp.com/attachments/3... |
Ant_IV#4437: only 4/12 used
Ant_IV#4437: undervolt 0.950 score
Ant_IV#4437: https://cdn.discordapp.com/attachments/305981966292090881/571480247174955023/unknown.png
Ant_IV#4437: 1965 core average, 8000MHz memory
Marulv#0287: If you want to stress more memory use the extreme vr benchmark. @Ant_IV
Ant_IV#4437: it doens... |
Ant_IV#4437: increased ram to 8100 https://cdn.discordapp.com/attachments/305981966292090881/571483115386830854/unknown.png
Ant_IV#4437: +1100
Kaden#5875: nice
Kaden#5875: Thats the score I get at 1080p lol
Marulv#0287: @Ant_IV some of the new rtx demos might stress your card. But they are not benchmarks of course
Ant_... |
Resune#9806: 470 or 480?
∫ntegral#0450: 570
Resune#9806: okay so yeah, much much newer card
∫ntegral#0450: well not really
∫ntegral#0450: 570 is just an oc'd 470
Resune#9806: when was it released?
∫ntegral#0450: how much power does hwinfo report?
∫ntegral#0450: uhh
∫ntegral#0450: 2017?
Resune#9806: 188w top power
Resun... |
Resune#9806: and show you the difference
∫ntegral#0450: stock for me: https://i.imgur.com/5HdY0JE.png
Ant_IV#4437: I need better cooling ;(. This AIO should keep me in the 60s
Resune#9806: stock in my bios is way way different from stock reference
Resune#9806: I'm gonna show a reference 970 perf
Ant_IV#4437: Ah my last... |
Ant_IV#4437: https://cdn.discordapp.com/attachments/305981966292090881/571493586580013057/unknown.png
Ant_IV#4437: PWR and VREL is why im perf cap
Ant_IV#4437: def not temps
∫ntegral#0450: well you won't get the temp perfcap reason until like 85°C or whenever the temp limit is
Ant_IV#4437: yeah
∫ntegral#0450: but gpu ... |
∫ntegral#0450: wow that's a big jump
Resune#9806: yeah my 970 is Oc'ed quite a bit
Ant_IV#4437: Once I get this damn 2080 TI OC done I’ll run a stock to compare
Resune#9806: https://cdn.discordapp.com/attachments/305981966292090881/571494758145327105/temp_target.PNG
Ant_IV#4437: Nice. Using the classic skin
∫ntegral#0... |
Ant_IV#4437: ah ur skin is blue mine looks like urs but its red
Ant_IV#4437: u DL off internet?
∫ntegral#0450: yeah it was posted on the sub a while ago
Ant_IV#4437: damn i like the blue much better than the red
∫ntegral#0450: https://puu.sh/BoQOa/c090597e5e.zip
Resune#9806: https://cdn.discordapp.com/attachments/3059... |
Ant_IV#4437: Like eventually my score is going to go down or the bench is going to lock up or crash
Ant_IV#4437: And yes diminished
∫ntegral#0450: why can't you use the skin?
Ant_IV#4437: Doesn’t have asynchronous fan control support
Ant_IV#4437: That skin needs updating
Ant_IV#4437: Which sucks because it’s beautiful
... |
Ant_IV#4437: lol
mi3night#2562: How much voltage should I increase for a 1460mhz overclock? On my 580
∫ntegral#0450: try 1.2v
mi3night#2562: Ok
mi3night#2562: I did but keep on crashing
∫ntegral#0450: what are your temps?
mi3night#2562: 73c
∫ntegral#0450: maybe back off to 1450
∫ntegral#0450: polaris hits a hard wall a... |
mi3night#2562: Why at times the clocks goes down @∫ntegral https://cdn.discordapp.com/attachments/305981966292090881/571558955445387284/image0.jpg
∫ntegral#0450: is your power limit maxed out?
mi3night#2562: No
∫ntegral#0450: that's why
∫ntegral#0450: it's hitting the power limit and throttling
mi3night#2562: https://w... |
∫ntegral#0450: look at the graphics score, not the overall score
mi3night#2562: 15,645
∫ntegral#0450: yep
mi3night#2562: We have similar cpus
mi3night#2562: And I expect a higher score cuz I’m almost getting beaten by a 570
∫ntegral#0450: the 570 isn't that much slower clock for clock than a 580
∫ntegral#0450: about ~7... |
mi3night#2562: That cooler is a beast, still somehow 65C underload at 1500mhz
mi3night#2562: Which version of the 570 u got
mi3night#2562: Got*
mi3night#2562: @∫ntegral tried to increase the mem clock to 2030 crashes
∫ntegral#0450: nitro+
∫ntegral#0450: that's strange
∫ntegral#0450: you should be able to do at least 20... |
mi3night#2562: what mv should i set to
mi3night#2562: i wanna break 13k
mi3night#2562: what do i do
∫ntegral#0450: oc your cpu
∫ntegral#0450: get better timings on your gpu
mi3night#2562: i oc my cpu to 4.6ghz
mi3night#2562: no more than that
∫ntegral#0450: what voltage?
mi3night#2562: 1.3
mi3night#2562: https://cdn.d... |
Ant_IV#4437: Think I need to use something other than superposition to confirm stable OC. What I was running last night and getting nearly 14k scores on 4k benchmarks is not stable in sekiro at 4k HDR
Ant_IV#4437: I was +170 and +1080 on my 2080 TI galax 380w bios and now I had to dial that back to +160 and +1000. Hope... |
BorgerKing#1856: like is there a specific reason it is unstable at higher than +150 or do all cards have different maximums?
Mickulty#1560: all cards have different maximums
Snaky115#4135: very very relative
Snaky115#4135: like what is this +150? We dont know end result absolute MHz
BorgerKing#1856: im sorry im new but... |
Ant_IV#4437: (Sorry for slow response. Not getting @ so I’m slow to see these 😉
Fitz#8200: a 120 does seem kinda small for a 300w+ gpu
YungJoshi#9023: Can someone help me overclock my msi gaming x gtx 1070
4a61636b#5675: TL;DR how to overclock your Pascal/Turing
-Install and run MSI Afterburner
-Max power and voltage... |
Fitz#8200: I wouldnt except much, just being able to stay below 49c on an aio
novicez#5892: what's the max voltage an unmodded RTX2080 takes? Specific model is the Aorus 2080 Xtreme
∫ntegral#0450: 1.093v
novicez#5892: @∫ntegral thanks man
∫ntegral#0450: np
Tech Wizard#8688: Got my RX 570 Expedition stable at -210mV wit... |
banzai#0196: https://cdn.discordapp.com/attachments/305981966292090881/572167776995770380/20190428_221901.jpg
banzai#0196: Whats happening here o_____O
Fitz#8200: half way through swapping out gpus?
Fitz#8200: or maybe doing sli, and half way through finding a place for the second rad
banzai#0196: testing which card ... |
banzai#0196: its a different benchmark
banzai#0196: run 1080p extreme
Resune#9806: *cries in 970* https://cdn.discordapp.com/attachments/305981966292090881/572189822052073474/15008ghz.PNG
Resune#9806: I need to power mod my 970 again if I want to take it further, it's at 1504mhz 8ghz 1.23v
Resune#9806: pulls 200W, for ... |
Mickulty#1560: oh, that shouldn't be happening then
kostaxr#9448: like it drops 100-150 mhz below stock
kostaxr#9448: yeah
kostaxr#9448: how can i fix that?
kostaxr#9448: without having to increase max power @Mickulty
Resune#9806: do you mean in MSI afterburner or messing with the bios?
Resune#9806: you can also power ... |
kostaxr#9448: 100-150 mhz down
kostaxr#9448: https://cdn.discordapp.com/attachments/305981966292090881/572205889268744213/unknown.png
Resune#9806: I'm not sure what the best case of action is for something like that, someone more experienced can help
kostaxr#9448: i have tried DDU
kostaxr#9448: could buildzoid help?
R... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.