repo_name stringlengths 5 122 | path stringlengths 3 232 | text stringlengths 6 1.05M |
|---|---|---|
gevirl/seldup | bamutil.c | /** bamutil.c **/
/*
*| File: bamutil.c |*
*| |*
*| Copyright (c) 2016-2018 University of Washington All rights reserved. |*
*| ... |
gevirl/seldup | bamutil.h | /** bamutil.h **/
/*
*| File: bamutil.h |*
*| |*
*| Copyright (c) 2016-2018 University of Washington All rights reserved. |*
*| ... |
chcbaram/arm_seminar_fw | opencr/cr_exam/etc/rosserial/src/bsp/bsp.h | /*
* bsp.h
*
* Created on: 2018. 3. 22.
* Author: <NAME>
*/
#ifndef SRC_BSP_BSP_H_
#define SRC_BSP_BSP_H_
#include "def.h"
#include "stm32f7xx_hal.h"
#ifdef __cplusplus
extern "C" {
#endif
void bspInit(void);
void bspDeInit(void);
#ifdef __cplusplus
}
#endif
#endif /* SRC_BSP_BSP_H_ */
|
chcbaram/arm_seminar_fw | opencr/cr_exam/etc/led_blink2/src/hw/core/timer.h | <gh_stars>1-10
/*
* timer.h
*
* Created on: 2018. 3. 16.
* Author: <NAME>
*/
#ifndef SRC_HW_CORE_TIMER_H_
#define SRC_HW_CORE_TIMER_H_
#include "hw_def.h"
void timerInit(void);
void timerSetISR(void (*func)(), uint32_t time_us);
void timerStart(void);
#endif /* SRC_HW_CORE_TIMER_H_ */
|
chcbaram/arm_seminar_fw | opencr/cr_exam/etc/led_blink2/src/hw/core/button.c | <gh_stars>1-10
/*
* button.c
*
* Created on: 2018. 3. 16.
* Author: <NAME>
*/
#include "button.h"
void buttonInit(void)
{
GPIO_InitTypeDef gpio_init_structure;
gpio_init_structure.Pin = GPIO_PIN_12;
gpio_init_structure.Mode = GPIO_MODE_INPUT;
gpio_init_structure.Pull = GPIO_NOPULL;
gpio... |
chcbaram/arm_seminar_fw | opencr/cr_exam/etc/boot/src/ap/ap.c | <reponame>chcbaram/arm_seminar_fw<gh_stars>1-10
/*
* ap.c
*
* Created on: 2018. 3. 16.
* Author: <NAME>
*/
#include "ap.h"
void timerISR(void)
{
static uint32_t cnt = 0;
if (cnt%1000 == 0)
{
ledToggle(2);
}
cnt++;
}
void apInit(void)
{
timerSetISR(timerISR, 1000);
timerStart();
... |
chcbaram/arm_seminar_fw | opencr/cr_downloader/cr_downloader/boot.c | /*
* boot.c
*
* Created on: 2016. 7. 13.
* Author: Baram
*/
#include "boot.h"
#include "cmd.h"
#include "util.h"
#include "uart.h"
#define BOOT_CMD_READ_VERSION 0x00
#define BOOT_CMD_READ_BOARD_NAME 0x01
#define BOOT_CMD_FLASH_ERASE 0x02
#define BOOT_CMD_FLASH_WRITE ... |
chcbaram/arm_seminar_fw | opencr/cr_exam/etc/led_blink2/src/hw/hw.h | <filename>opencr/cr_exam/etc/led_blink2/src/hw/hw.h
/*
* hw.h
*
* Created on: 2018. 3. 16.
* Author: <NAME>
*/
#ifndef SRC_HW_HW_H_
#define SRC_HW_HW_H_
#include "bsp.h"
#include "hw_def.h"
#include "core/led.h"
#include "core/button.h"
#include "core/pwm.h"
#include "core/timer.h"
#include "usb_cdc/usb... |
chcbaram/arm_seminar_fw | opencr/cr_exam/basic/boot/src/ap/ap.c | /*
* ap.c
*
* Created on: 2018. 3. 22.
* Author: <NAME>
*/
#include "ap.h"
void updateLed(void);
void updateButton(void);
void updateDownload(void);
bool runJump(void);
bool runDownload(void);
bool runErase(void);
void apInit(void)
{
}
void apMain(void)
{
if (buttonGetPressed(0) == false)
{
... |
chcbaram/arm_seminar_fw | opencm9.04/opencm_bootloader/src/main.c | /*
* main.c
*
* Created on: 2017. 3. 19.
* Author: baram
*/
/*
for OpenOCD
-f interface/stlink-v2.cfg -f target/stm32f1x.cfg
*/
#include "main.h"
void mainInit(void);
void led_isr(void *arg)
{
ledToggle(0);
}
int main(void)
{
mainInit();
apMain();
return 0;
}
void mainInit(void)
{
... |
chcbaram/arm_seminar_fw | opencr/cr_exam/etc/rosserial/src/hw/core/button.h | <filename>opencr/cr_exam/etc/rosserial/src/hw/core/button.h
/*
* button.h
*
* Created on: 2018. 3. 22.
* Author: <NAME>
*/
#ifndef SRC_HW_CORE_BUTTON_H_
#define SRC_HW_CORE_BUTTON_H_
#include "hw_def.h"
#ifdef __cplusplus
extern "C" {
#endif
void buttonInit(void);
bool buttonGetPressed(uint8_t ch);
... |
chcbaram/arm_seminar_fw | tutorial/04/mission_2/04_m2/src/ap/ap.c | /*
* ap.c
*
* Created on: 2016. 7. 13.
* Author: Baram
*/
#include "ap.h"
int demoCmdif(int argc, char **argv);
void apInit(void)
{
}
void apMain(void)
{
cmdifBegin(_DEF_UART1, 115200);
while(1)
{
cmdifLoop();
}
}
|
chcbaram/arm_seminar_fw | opencm9.04/opencm_bootloader/src/hw/core/micros.c | /*
* micros.c
*
* Created on: 2016. 7. 13.
* Author: Baram
*/
#include "micros.h"
#include "swtimer.h"
void microsInit()
{
}
uint32_t micros()
{
return swtimerGetMicroCounter();
}
|
chcbaram/arm_seminar_fw | opencr/cr_exam/basic/firmware/src/common/def.h | <filename>opencr/cr_exam/basic/firmware/src/common/def.h<gh_stars>1-10
/*
* def.h
*
* Created on: 2018. 3. 22.
* Author: <NAME>
*/
#ifndef SRC_COMMON_DEF_H_
#define SRC_COMMON_DEF_H_
#include <stdint.h>
#include <stdbool.h>
#endif /* SRC_COMMON_DEF_H_ */
|
chcbaram/arm_seminar_fw | opencm9.04/opencm_bootloader/src/hw/core/uart.c | <reponame>chcbaram/arm_seminar_fw
/*
* uart.c
*
* Created on: 2017. 2. 13.
* Author: baram
*/
/*
_HW_DEF_UART_CH_MAX : 2
_DEF_UART1 : VCP
_DEF_UART2 : USART2
*/
/*
USART2
- RX : PD6, DMA1, Channel 4, Stream 5
- TX : PD5, DMA1, Channel 4, Stream 6
USART8
- RX : PE0, D... |
chcbaram/arm_seminar_fw | opencm9.04/opencm_bootloader/src/hw/core/hwtimer.c | /*
* hwtimer.c
*
* Created on: 2017. 2. 13.
* Author: baram
*/
#include <stdarg.h>
#include <stdbool.h>
#include "hw.h"
#include "hwtimer.h"
typedef struct
{
TIM_HandleTypeDef hTIM;
uint8_t enable;
uint32_t freq;
uint32_t prescaler_value;
uint32_t prescaler_value_1M;
uint32_t prescaler_div... |
chcbaram/arm_seminar_fw | opencr/cr_firmware/src/ap/boot/boot.h | <gh_stars>1-10
/*
* boot.h
*
* Created on: 2016. 5. 14.
* Author: Baram
*/
#ifndef BOOT_H
#define BOOT_H
#ifdef __cplusplus
extern "C" {
#endif
#include "def.h"
#include "bsp.h"
#include "hw.h"
#define BOOT_ERR_INVAILD_CMD 0x00
void bootInit(void);
void bootProcessCmd(cmd_t *p_cmd);
voi... |
chcbaram/arm_seminar_fw | tutorial/04/result/mission_1/04_m1/src/hw/core/usb.h | <gh_stars>1-10
/*
* usb.h
*
*
*
* Created on: 2016. 5. 14.
* Author: Baram
*/
#ifndef USB_H
#define USB_H
#ifdef __cplusplus
extern "C" {
#endif
#include "def.h"
#include "bsp.h"
void usbInit(void);
void usbDeInit(void);
#ifdef __cplusplus
}
#endif
#endif
|
chcbaram/arm_seminar_fw | opencm9.04/opencm_bootloader/src/ap/boot/boot.c | /*
* ap.c
*
* Created on: 2016. 7. 13.
* Author: Baram
*/
#include "ap.h"
#include "boot.h"
#define BOOT_CMD_READ_VERSION 0x00
#define BOOT_CMD_READ_BOARD_NAME 0x01
#define BOOT_CMD_FLASH_ERASE 0x02
#define BOOT_CMD_FLASH_WRITE 0x03
#define BOOT_CMD_FLASH_READ ... |
chcbaram/arm_seminar_fw | opencr/cr_exam/etc/rosserial/src/hw/core/led.h | /*
* led.h
*
* Created on: 2018. 3. 22.
* Author: <NAME>
*/
#ifndef SRC_HW_CORE_LED_H_
#define SRC_HW_CORE_LED_H_
#include "hw_def.h"
#ifdef __cplusplus
extern "C" {
#endif
void ledInit(void);
void ledOn(uint8_t ch);
void ledOff(uint8_t ch);
void ledToggle(uint8_t ch);
#ifdef __cplusplus
}
#endif
... |
chcbaram/arm_seminar_fw | opencr/cr_firmware/src/main.c | <gh_stars>1-10
/*
* main.c
*
* Created on: 2017. 3. 19.
* Author: baram
*/
#include "main.h"
void mainInit(void);
int main(void)
{
uint32_t t_time;
uint32_t t_time_us;
uint32_t cnt = 0.;
uint32_t i;
mainInit();
t_time = millis();
t_time_us = micros();
while(1)
{
if (mil... |
chcbaram/arm_seminar_fw | opencm9.04/opencm_bootloader/src/bsp/bsp.h | /*
* bsp.h
*
* boart support package
*
* Created on: 2017. 3. 16.
* Author: Baram
*/
#ifndef BSP_H
#define BSP_H
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
#include <stdbool.h>
#include "def.h"
#include "stm32f1xx.h"
#include "stm32f1xx_hal.h"
#include "usb_cdc/usbd_core.h"
#inclu... |
chcbaram/arm_seminar_fw | opencm9.04/opencm_bootloader/src/hw/hw_def.h | /*
* hw_def.h
*
* Created on: 2016. 5. 14.
* Author: Baram
*/
#ifndef HW_DEF_H
#define HW_DEF_H
#ifdef __cplusplus
extern "C" {
#endif
#define _HW_DEF_SWTIMER_CH _DEF_TIMER1
#define _HW_DEF_UART_CH_MAX 2
#define _HW_DEF_SW_TIMER_MAX 8
#define _HW_DEF_CMDI... |
chcbaram/arm_seminar_fw | tutorial/04/mission_3/04_m3/src/ap/ap.c | /*
* ap.c
*
* Created on: 2016. 7. 13.
* Author: Baram
*/
#include "ap.h"
/*
uint32_t pre_time;
if (millis()-pre_time >= 100 )
{
pre_time = millis();
// 100ms 마다 실행
}
if (buttonGetPressed(0) == true)
{
//버튼 눌렸을 때
}
*/
void apInit(void)
{
}
void apMain(void)
{
... |
chcbaram/arm_seminar_fw | opencr/cr_exam/etc/led_blink2/src/common/def.h | <gh_stars>1-10
/*
* def.h
*
* Created on: 2018. 3. 16.
* Author: <NAME>
*/
#ifndef SRC_COMMON_DEF_H_
#define SRC_COMMON_DEF_H_
#endif /* SRC_COMMON_DEF_H_ */
|
chcbaram/arm_seminar_fw | opencm9.04/opencm_bootloader/src/bsp/bsp.c | <reponame>chcbaram/arm_seminar_fw
/*
* bsp.c
*
* boart support package
*
* Created on: 2017. 3. 16.
* Author: Baram
*/
#include "bsp.h"
#include "hw.h"
void SystemClock_Config(void);
void bspInit()
{
GPIO_InitTypeDef GPIO_InitStruct;
// STM32Cube HAL Init
HAL_Init();
// Clock Setup... |
chcbaram/arm_seminar_fw | tutorial/04/result/mission_1/04_m1/src/hw/core/buzzer.h | /*
* buzzer.h
*
* Created on: 2016. 5. 14.
* Author: Baram
*/
#ifndef BUZZER_H
#define BUZZER_H
#ifdef __cplusplus
extern "C" {
#endif
#include "def.h"
#include "bsp.h"
bool buzzerInit(void);
void buzzerStart(uint32_t frequency, uint32_t duration);
void BuzzerStop(void);
#ifdef __cplusplu... |
chcbaram/arm_seminar_fw | opencr/cr_exam/etc/led_blink/src/hw/hw.h | <gh_stars>1-10
/*
* hw.h
*
* Created on: 2018. 3. 16.
* Author: <NAME>
*/
#ifndef SRC_HW_HW_H_
#define SRC_HW_HW_H_
#include "hw_def.h"
#include "core/delay.h"
#include "core/led.h"
#include "usb_cdc/usb.h"
#include "usb_cdc/vcp.h"
void hwInit(void);
uint32_t millis(void);
#endif /* SRC_HW_HW_H_... |
chcbaram/arm_seminar_fw | opencr/cr_exam/etc/firm_led/src/bsp/bsp.h | <reponame>chcbaram/arm_seminar_fw<gh_stars>1-10
/*
* bsp.h
*
* Created on: 2018. 3. 19.
* Author: <NAME>
*/
#ifndef SRC_BSP_BSP_H_
#define SRC_BSP_BSP_H_
#include "def.h"
#include "stm32f7xx_hal.h"
void bspInit(void);
#endif /* SRC_BSP_BSP_H_ */
|
chcbaram/arm_seminar_fw | opencr/cr_downloader/cr_downloader/download.c | /*
* download.c
*
* Created on: 2016. 7. 13.
* Author: Baram
*/
#include "boot.h"
#include "cmd.h"
#include "util.h"
#include "uart.h"
#define FLASH_FW_SIZE (768*1024) // 768KB
#define FLASH_FW_ADDR_START 0x08040000
#define FLASH_FW_ADDR_END (FLASH_FW_... |
chcbaram/arm_seminar_fw | opencr/cr_exam/etc/led_blink/src/hw/core/delay.h | /*
* delay.h
*
* Created on: 2018. 3. 16.
* Author: <NAME>
*/
#ifndef SRC_HW_CORE_DELAY_H_
#define SRC_HW_CORE_DELAY_H_
#include "hw_def.h"
void delayInit(void);
void delay(uint32_t time_ms);
#endif /* SRC_HW_CORE_DELAY_H_ */
|
chcbaram/arm_seminar_fw | opencr/cr_exam/etc/rosserial/src/hw/core/led.c | <reponame>chcbaram/arm_seminar_fw
/*
* led.c
*
* Created on: 2018. 3. 22.
* Author: <NAME>
*/
#include "led.h"
void ledInit(void)
{
GPIO_InitTypeDef gpio_init_structure;
/* Configure the GPIO_LED pin */
gpio_init_structure.Pin = GPIO_PIN_12;
gpio_init_structure.Mode = GPIO_MODE_OUTPUT_PP;
g... |
chcbaram/arm_seminar_fw | opencr/cr_exam/etc/rosserial/src/hw/core/flash.c | <filename>opencr/cr_exam/etc/rosserial/src/hw/core/flash.c<gh_stars>1-10
/*
* flash.c
*
* Created on: 2018. 3. 22.
* Author: <NAME>
*/
#include "flash.h"
#define ADDR_FLASH_SECTOR_0 ((uint32_t)0x08000000) /* Base address of Sector 0, 32 Kbytes */
#define ADDR_FLASH_SECTOR_1 ((uint32_t)0x0800800... |
chcbaram/arm_seminar_fw | tutorial/05/result/mission_1/m1/main.c | <reponame>chcbaram/arm_seminar_fw<filename>tutorial/05/result/mission_1/m1/main.c
#include <stdio.h>
int main(int argc, char *argv[])
{
int baud;
int mode;
if (argc == 4)
{
baud = strtol( argv[ 2 ], NULL, 10 );
mode = strtol( argv[ 3 ], NULL, 10 );
printf("Port : %s\n", argv[1]);
printf("Baud... |
chcbaram/arm_seminar_fw | opencr/cr_exam/basic/firmware/src/hw/hw.h | /*
* hw.h
*
* Created on: 2018. 3. 22.
* Author: <NAME>
*/
#ifndef SRC_HW_HW_H_
#define SRC_HW_HW_H_
#include "hw_def.h"
#include "core/led.h"
void hwInit(void);
void delay(uint32_t time_ms);
uint32_t millis(void);
#endif /* SRC_HW_HW_H_ */
|
chcbaram/arm_seminar_fw | tutorial/04/result/mission_1/04_m1/src/hw/core/vcp.h | <reponame>chcbaram/arm_seminar_fw<filename>tutorial/04/result/mission_1/04_m1/src/hw/core/vcp.h
/*
* vcp.h
*
* virtual_com_port
*
* Created on: 2016. 5. 14.
* Author: Baram, PBHP
*/
#ifndef VCP_H
#define VCP_H
#ifdef __cplusplus
extern "C" {
#endif
#include "def.h"
#include "bsp.h"
void vcpIn... |
chcbaram/arm_seminar_fw | opencr/cr_downloader/cr_downloader/main.c | <filename>opencr/cr_downloader/cr_downloader/main.c
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>
#include <limits.h>
#include "uart.h"
#include "boot.h"
#include "download.h"
int main(int argc, char *argv[])
{
long baud;
printf("cr_bootloaer \r\n");
printf("ver : 1.0 \r\n... |
chcbaram/arm_seminar_fw | opencr/cr_firmware/src/common/def_err.h | /*
* def_err.h
*
* Created on: 2016. 5. 14.
* Author: Baram
*/
#ifndef DEF_ERR_H
#define DEF_ERR_H
#define ERR_INVALID_CMD 100
#define ERR_INVALID_FW 242
#define ERR_FLASH_ADDR_ALIGN 243
#define ERR_FLASH_INVALID_ADDR 244
#define ERR_FLASH_ERROR ... |
chcbaram/arm_seminar_fw | tutorial/03/01_basic_fw/src/main.c | <filename>tutorial/03/01_basic_fw/src/main.c<gh_stars>1-10
/*
* main.c
*
* Created on: 2017. 3. 19.
* Author: baram
*/
/*
for OpenOCD
-f opencr_openocd.cfg
*/
#include "main.h"
void mainInit(void);
int main(void)
{
mainInit();
apMain();
return 0;
}
void mainInit(void)
{
bspInit();
h... |
chcbaram/arm_seminar_fw | opencr/cr_firmware/src/ap/boot/boot.c | <filename>opencr/cr_firmware/src/ap/boot/boot.c
/*
* ap.c
*
* Created on: 2016. 7. 13.
* Author: Baram
*/
#include "ap.h"
#include "boot.h"
#define BOOT_CMD_READ_VERSION 0x00
#define BOOT_CMD_READ_BOARD_NAME 0x01
#define BOOT_CMD_FLASH_ERASE 0x02
#define BOOT_CMD_FLASH_WRITE ... |
chcbaram/arm_seminar_fw | opencr/cr_downloader/cr_downloader/def.h | #ifndef DEF_H
#define DEF_H
#include <stdio.h>
#include <stdarg.h>
#include <stdbool.h>
#include <string.h>
#include <stdint.h>
typedef struct
{
uint32_t ptr_in;
uint32_t ptr_out;
uint32_t length;
uint8_t *p_buf;
} ring_buf_t;
typedef uint8_t err_code_t;
#define OK 0
#define _DEF_U... |
chcbaram/arm_seminar_fw | tutorial/04/result/mission_3/04_m3/src/ap/ap.c | /*
* ap.c
*
* Created on: 2016. 7. 13.
* Author: Baram
*/
#include "ap.h"
void apInit(void)
{
}
void apMain(void)
{
uint8_t button_state;
uint32_t pre_time;
uint32_t repeat_cnt;
uartOpen(_DEF_UART1, 115200);
button_state = 0;
while(1)
{
switch(button_state)
{
case ... |
chcbaram/arm_seminar_fw | opencr/cr_downloader/cr_downloader/util.h | /*
* util.h
*
* Created on: 2017. 2. 13.
* Author: baram
*/
#ifndef UTIL_H_
#define UTIL_H_
#include <stdint.h>
#include <Windows.h>
#include "def.h"
#ifdef __cplusplus
extern "C" {
#endif
uint32_t millis(void);
void delay(uint32_t delay_ms);
#ifdef __cplusplus
}
#endif
#endif
|
chcbaram/arm_seminar_fw | opencr/cr_exam/etc/led_blink/src/hw/core/delay.c | /*
* delay.c
*
* Created on: 2018. 3. 16.
* Author: <NAME>
*/
#include "delay.h"
void delayInit(void)
{
}
void delay(uint32_t time_ms)
{
HAL_Delay(time_ms);
}
|
chcbaram/arm_seminar_fw | opencr/cr_exam/etc/led_blink/src/main.c | <reponame>chcbaram/arm_seminar_fw
/*
* main.c
*
* Created on: 2018. 3. 16.
* Author: <NAME>
*/
#include "main.h"
int main(void)
{
bspInit();
hwInit();
apInit();
apMain();
return 0;
}
|
chcbaram/arm_seminar_fw | tutorial/04/result/mission_2/04_m2/src/ap/ap.c | <reponame>chcbaram/arm_seminar_fw
/*
* ap.c
*
* Created on: 2016. 7. 13.
* Author: Baram
*/
#include "ap.h"
int demoCmdif(int argc, char **argv);
void apInit(void)
{
}
void apMain(void)
{
cmdifBegin(_DEF_UART1, 115200);
cmdifAdd("demo", demoCmdif);
while(1)
{
cmdifLoop();
}
}
//... |
chcbaram/arm_seminar_fw | opencr/cr_exam/etc/led_blink/src/hw/usb_cdc/usb.c | /*
* usb.c
*
* Created on: 2018. 3. 16.
* Author: <NAME>
*/
#include "usb.h"
USBD_HandleTypeDef USBD_Device;
extern PCD_HandleTypeDef hpcd;
void usbInit(void)
{
GPIO_InitTypeDef GPIO_InitStruct;
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOG_CLK_ENABLE();
/* Configure DM DP Pins - For... |
chcbaram/arm_seminar_fw | opencm9.04/opencm_bootloader/src/hw/core/hwtimer.h | <gh_stars>1-10
/*
* hwtimer.h
*
* Created on: 2017. 4. 7.
* Author: baram
*/
#ifndef TIMER_H_
#define TIMER_H_
#ifdef __cplusplus
extern "C" {
#endif
#include "hw_def.h"
#include "bsp.h"
bool hwtimerInit(void);
void hwtimerStop(uint8_t channel);
void hwtimerSetPeriod(uint8_t channel, uint32_t ... |
chcbaram/arm_seminar_fw | opencr/cr_exam/etc/rosserial/src/hw/core/flash.h | /*
* flash.h
*
* Created on: 2018. 3. 22.
* Author: <NAME>
*/
#ifndef SRC_HW_CORE_FLASH_H_
#define SRC_HW_CORE_FLASH_H_
#include "hw_def.h"
#ifdef __cplusplus
extern "C" {
#endif
void flashInit(void);
bool flashErase(uint32_t addr, uint32_t length);
bool flashWrite(uint32_t addr, uint8_t *p_data, uint... |
chcbaram/arm_seminar_fw | opencr/cr_exam/etc/led_blink2/src/hw/core/pwm.h | /*
* pwm.h
*
* Created on: 2018. 3. 16.
* Author: <NAME>
*/
#ifndef SRC_HW_CORE_PWM_H_
#define SRC_HW_CORE_PWM_H_
#include "hw_def.h"
void pwmInit(void);
void pwmWrite8(uint8_t pwm_data);
#endif /* SRC_HW_CORE_PWM_H_ */
|
chcbaram/arm_seminar_fw | nucleo/nucleo_firmware/src/main.c | /*
* main.c
*
* Created on: 2017. 3. 19.
* Author: baram
*/
#include "main.h"
void mainInit(void);
int main(void)
{
uint32_t t_time;
uint32_t cnt = 0;
mainInit();
t_time = millis();
while(1)
{
if (millis()-t_time >= 1000)
{
t_time = millis();
uartPrintf(_DEF_UA... |
chcbaram/arm_seminar_fw | opencr/cr_exam/etc/led_blink/src/hw/core/led.c | <gh_stars>1-10
/*
* led.c
*
* Created on: 2018. 3. 16.
* Author: <NAME>
*/
#include "led.h"
void ledInit(void)
{
GPIO_InitTypeDef gpio_init_structure;
/* Configure the GPIO_LED pin */
gpio_init_structure.Pin = GPIO_PIN_12;
gpio_init_structure.Mode = GPIO_MODE_OUTPUT_PP;
gpio_init_struct... |
chcbaram/arm_seminar_fw | tutorial/03/01_basic_fw/src/bsp/bsp.c | <gh_stars>1-10
/*
* bsp.c
*
* boart support package
*
* Created on: 2017. 3. 16.
* Author: Baram
*/
#include "bsp.h"
#include "hw.h"
void bspInit()
{
// STM32Cube HAL Init
HAL_Init();
// Clock Setup
// SYSCLK(Hz) = 216000000
// HCLK(Hz) = 216000000
// HSE(Hz) = 25000... |
chcbaram/arm_seminar_fw | opencr/cr_exam/etc/led_blink2/src/bsp/bsp.h | <filename>opencr/cr_exam/etc/led_blink2/src/bsp/bsp.h
/*
* bsp.h
*
* Created on: 2018. 3. 16.
* Author: <NAME>
*/
#ifndef SRC_BSP_BSP_H_
#define SRC_BSP_BSP_H_
#include <stdint.h>
#include <stdbool.h>
#include "stm32f7xx.h"
#include "stm32f7xx_hal.h"
#include "stm32f7xx_hal_conf.h"
#include "system_stm32... |
chcbaram/arm_seminar_fw | tutorial/04/result/mission_1/04_m1/src/hw/core/buzzer.c | <reponame>chcbaram/arm_seminar_fw
/*
* buzzer.c
*
* Created on: 2016. 7. 13.
* Author: Baram
*/
#include "hw.h"
#include "buzzer.h"
volatile int32_t buzzer_toggle_count;
volatile uint8_t buzzer_timer = _HW_DEF_BUZZER_CH;
volatile bool buzzer_enable = false;
static void buzzerBegin(void);
static ... |
chcbaram/arm_seminar_fw | tutorial/04/result/mission_1/04_m1/src/hw/core/usb.c | /*
* usb.c
*
*
* Created on: 2016. 5. 14.
* Author: Baram
*/
#include "usb.h"
#include "usb_cdc/usbd_core.h"
#include "usb_cdc/usbd_desc.h"
#include "usb_cdc/usbd_cdc.h"
#include "usb_cdc/usbd_cdc_interface.h"
USBD_HandleTypeDef USBD_Device;
void usbInit(void)
{
/* Init Device Library */
USBD_... |
chcbaram/arm_seminar_fw | tutorial/05/mission_2/m2/main.c | <gh_stars>1-10
#include <stdio.h>
#include <stdarg.h>
#include <stdbool.h>
#include <string.h>
#include <stdint.h>
#include <stdlib.h>
uint32_t getFileSize(char *file_name);
/*
number = strtol( argv[ 2 ], NULL, 10 );
*/
int main(int argc, char *argv[])
{
return 0;
}
uint32_t getFileSize(char *file_name)
... |
chcbaram/arm_seminar_fw | opencr/cr_downloader/cr_downloader/download.h | /*
* download.h
*
* Created on: 2016. 5. 14.
* Author: Baram
*/
#ifndef DOWNLOAD_H
#define DOWNLOAD_H
#ifdef __cplusplus
extern "C" {
#endif
#include "def.h"
int download(int argc, char *argv[]);
#ifdef __cplusplus
}
#endif
#endif
|
chcbaram/arm_seminar_fw | opencr/cr_exam/etc/led_blink2/src/ap/ap.c | <gh_stars>1-10
/*
* ap.c
*
* Created on: 2018. 3. 16.
* Author: <NAME>
*/
#include "ap.h"
void timerISR(void)
{
static uint32_t cnt = 0;
if (cnt%1000 == 0)
{
ledToggle(2);
}
cnt++;
}
void apInit(void)
{
timerSetISR(timerISR, 1000);
timerStart();
}
void apMain(void)
{
uint32_t... |
chcbaram/arm_seminar_fw | opencr/cr_downloader/cr_downloader/boot.h | <gh_stars>1-10
/*
* boot.h
*
* Created on: 2016. 5. 14.
* Author: Baram
*/
#ifndef BOOT_H
#define BOOT_H
#ifdef __cplusplus
extern "C" {
#endif
#include "def.h"
typedef struct
{
uint32_t tag;
uint32_t date;
uint32_t firmware_offset;
uint32_t firmware_offset_version;
uint32_t fir... |
chcbaram/arm_seminar_fw | tutorial/05/mission_1/m1/main.c | #include <stdio.h>
/*
baud = strtol( argv[ 2 ], NULL, 10 );
mode = strtol( argv[ 3 ], NULL, 10 );
*/
int main(int argc, char *argv[])
{
int baud;
int mode;
return 0;
}
|
chcbaram/arm_seminar_fw | opencr/cr_firmware/src/hw/hw_def.h | <reponame>chcbaram/arm_seminar_fw
/*
* hw_def.h
*
* Created on: 2016. 5. 14.
* Author: Baram
*/
#ifndef HW_DEF_H
#define HW_DEF_H
#ifdef __cplusplus
extern "C" {
#endif
#define _HW_DEF_BUZZER_CH _DEF_TIMER3
#define _HW_DEF_SWTIMER_CH _DEF_TIMER4
#define _HW_DEF_UART_... |
chcbaram/arm_seminar_fw | opencr/cr_exam/etc/led_blink2/src/hw/core/timer.c | /*
* timer.c
*
* Created on: 2018. 3. 16.
* Author: <NAME>
*/
#include "timer.h"
static TIM_HandleTypeDef TimHandle;
static uint32_t uwPrescalerValue = 0;
static void (*timer_isr_func)(void) = NULL;
void timerInit(void)
{
}
void timerSetISR(void (*func)(void), uint32_t time_us)
{
timer_isr_... |
chcbaram/arm_seminar_fw | tutorial/03/01_basic_fw/src/ap/ap.c | <gh_stars>1-10
/*
* ap.c
*
* Created on: 2016. 7. 13.
* Author: Baram
*/
#include "ap.h"
void apInit(void)
{
}
void apMain(void)
{
uint32_t pre_time;
pre_time = millis();
while(1)
{
// 500ms마다 점멸한다.
//
if (millis()-pre_time >= 500)
{
pre_time = millis();
ledT... |
keltonhalbert/LOFT | src/include/loftcu.h |
/*
* Copyright (C) 2017-2020 <NAME>, Space Science and Engineering Center (SSEC), University of Wisconsin - Madison
* Written by <NAME> at the University of Wisconsin - Madison,
* Cooperative Institute for Meteorological Satellite Studies (CIMSS),
* Space Science and Engineering Center (SSEC). Provided under the A... |
keltonhalbert/LOFT | src/include/constants.h | #ifndef CONSTANTS_H
#define CONSTANTS_H
/*
* Copyright (C) 2017-2020 <NAME>, Space Science and Engineering Center (SSEC), University of Wisconsin - Madison
* Written by <NAME> at the University of Wisconsin - Madison,
* Cooperative Institute for Meteorological Satellite Studies (CIMSS),
* Space Science and Enginee... |
keltonhalbert/LOFT | src/include/datastructs.h | <filename>src/include/datastructs.h
// header file for reading CUDA compiled
// stuffs
#include <lofs-dirstruct.h>
#include <lofs-hdf2nc.h>
#ifndef DATASTRUCTS_H
#define DATASTRUCTS_H
/*
* Copyright (C) 2017-2020 <NAME>, Space Science and Engineering Center (SSEC), University of Wisconsin - Madison
* Written by <NAME... |
keltonhalbert/LOFT | src/include/prefetch.h | <reponame>keltonhalbert/LOFT<gh_stars>1-10
#include "datastructs.h"
#include <lofs-dirstruct.h>
#include <lofs-hdf2nc.h>
#ifndef PREFETCH_H
#define PREFETCH_H
void prefetch_parcels_cpu(iocfg *io, parcel_pos *parcels, cudaStream_t memStream);
void prefetch_model_gpu(iocfg *io, model_data *data, long bufsize, cudaStream_... |
keltonhalbert/LOFT | src/include/integrate.h | #include <iostream>
#include "datastructs.h"
#ifndef INTEGRATE_H
#define INTEGRATE_H
/*
* Copyright (C) 2017-2020 <NAME>, Space Science and Engineering Center (SSEC), University of Wisconsin - Madison
* Written by <NAME> at the University of Wisconsin - Madison,
* Cooperative Institute for Meteorological Satellite S... |
AndersenSemenov/UTBotCpp | server/src/printers/TestMakefilesPrinter.h | <filename>server/src/printers/TestMakefilesPrinter.h
/*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#ifndef UNITTESTBOT_TESTMAKEFILESPRINTER_H
#define UNITTESTBOT_TESTMAKEFILESPRINTER_H
#include "NativeMakefilePrinter.h"
namespace printer {
class TestMakefilesContent {
... |
AndersenSemenov/UTBotCpp | server/src/stubs/Stubs.h | <reponame>AndersenSemenov/UTBotCpp
/*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#ifndef UNITTESTBOT_STUBS_H
#define UNITTESTBOT_STUBS_H
#include "utils/CollectionUtils.h"
#include <string>
#include <unordered_set>
#include <vector>
#include "utils/path/FileSystemPath.h"
stru... |
AndersenSemenov/UTBotCpp | server/src/visitors/VerboseParameterVisitor.h | /*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#ifndef UNITTESTBOT_VERBOSEPARAMETERVISITOR_H
#define UNITTESTBOT_VERBOSEPARAMETERVISITOR_H
#include "AbstractValueViewVisitor.h"
#include "Tests.h"
namespace printer {
class TestsPrinter;
}
namespace visitor {
class Verb... |
AndersenSemenov/UTBotCpp | server/src/testgens/FileTestGen.h | <reponame>AndersenSemenov/UTBotCpp
/*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#ifndef UNITTESTBOT_FileTESTGEN_H
#define UNITTESTBOT_FileTESTGEN_H
#include "ProjectTestGen.h"
class FileTestGen final : public ProjectTestGen {
public:
fs::path filepath;
FileTestGen(c... |
AndersenSemenov/UTBotCpp | server/src/streams/stubs/ServerStubsWriter.h | /*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#ifndef UNITTESTBOT_VSCODESTUBSWRITER_H
#define UNITTESTBOT_VSCODESTUBSWRITER_H
#include "StubsWriter.h"
class ServerStubsWriter : public StubsWriter {
public:
explicit ServerStubsWriter(grpc::ServerWriter<testsgen::StubsRespon... |
AndersenSemenov/UTBotCpp | server/src/Synchronizer.h | /*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#ifndef UNITTESTBOT_SYNCHRONIZER_H
#define UNITTESTBOT_SYNCHRONIZER_H
#include "ProjectContext.h"
#include "stubs/StubGen.h"
#include "types/Types.h"
class StubOperator {
public:
StubOperator(fs::path sourceFilePath, bool isHe... |
AndersenSemenov/UTBotCpp | server/src/stubs/StubGen.h | /*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#ifndef UNITTESTBOT_STUBGEN_H
#define UNITTESTBOT_STUBGEN_H
#include "KleeGenerator.h"
#include "testgens/BaseTestGen.h"
#include "utils/TimeUtils.h"
#include "utils/path/FileSystemPath.h"
#include <unordered_map>
#include <vector>... |
AndersenSemenov/UTBotCpp | server/src/streams/coverage/CLICoverageAndResultsWriter.h | <reponame>AndersenSemenov/UTBotCpp
/*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#ifndef UNITTESTBOT_CLICOVERAGEANDRESULTSWRITER_H
#define UNITTESTBOT_CLICOVERAGEANDRESULTSWRITER_H
#include "CoverageAndResultsWriter.h"
class CLICoverageAndResultsWriter : public CoverageAndRes... |
AndersenSemenov/UTBotCpp | server/src/types/TypesResolver.h | /*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#ifndef UNITTESTBOT_TYPESRESOLVER_H
#define UNITTESTBOT_TYPESRESOLVER_H
#include "types/Types.h"
#include <clang/AST/Decl.h>
#include <string>
#include <utility>
class Fetcher;
class TypesResolver {
private:
const Fetcher *c... |
AndersenSemenov/UTBotCpp | server/test/suites/syntax/pointer_parameters.c | <filename>server/test/suites/syntax/pointer_parameters.c
/*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#include "pointer_parameters.h"
int c_strcmp(const char *a, const char *b) {
for (int i = 0;; i++) {
if (a[i] != b[i]) {
return 0;
} else {
... |
AndersenSemenov/UTBotCpp | server/src/printers/NativeMakefilePrinter.h | <gh_stars>0
/*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#ifndef UNITTESTBOT_NATIVEMAKEFILEPRINTER_H
#define UNITTESTBOT_NATIVEMAKEFILEPRINTER_H
#include "BuildResult.h"
#include "printers/DefaultMakefilePrinter.h"
#include "testgens/BaseTestGen.h"
#include "utils/path/FileSy... |
AndersenSemenov/UTBotCpp | server/src/visitors/KleeAssumeReturnValueVisitor.h | /*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#ifndef UNITTESTBOT_KLEEASSUMERETURNVALUEVISITOR_H
#define UNITTESTBOT_KLEEASSUMERETURNVALUEVISITOR_H
#include "KleeAssumeVisitor.h"
#include "Tests.h"
namespace visitor {
class KleeAssumeReturnValueVisitor : public KleeAssumeV... |
AndersenSemenov/UTBotCpp | server/src/building/Linker.h | <reponame>AndersenSemenov/UTBotCpp
/*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#ifndef UNITTESTBOT_LINKER_H
#define UNITTESTBOT_LINKER_H
#include "BuildResult.h"
#include "IRParser.h"
#include "KleeGenerator.h"
#include "RunCommand.h"
#include "printers/DefaultMakefilePrinter... |
AndersenSemenov/UTBotCpp | server/src/exceptions/LLVMException.h | /*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#ifndef UNITTESTBOT_LLVMEXCEPTION_H
#define UNITTESTBOT_LLVMEXCEPTION_H
#include "BaseException.h"
struct LLVMException : public BaseException {
explicit LLVMException(std::string message) : BaseException(std::move(message)) {
... |
AndersenSemenov/UTBotCpp | server/src/printers/Printer.h | /*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#ifndef UNITTESTBOT_PRINTER_H
#define UNITTESTBOT_PRINTER_H
#include "Language.h"
#include "Tests.h"
#include "building/BuildDatabase.h"
#include "stubs/Stubs.h"
#include "utils/path/FileSystemPath.h"
#include "types/Types.h"
#incl... |
AndersenSemenov/UTBotCpp | server/src/visitors/AssertsVisitor.h | <reponame>AndersenSemenov/UTBotCpp<filename>server/src/visitors/AssertsVisitor.h
/*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#ifndef UNITTESTBOT_ASSERTSVISITOR_H
#define UNITTESTBOT_ASSERTSVISITOR_H
#include "AbstractValueViewVisitor.h"
#include "printers/TestsPrinter.h"
#in... |
AndersenSemenov/UTBotCpp | server/src/Tests.h | <filename>server/src/Tests.h
/*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#ifndef UNITTESTBOT_TESTS_H
#define UNITTESTBOT_TESTS_H
#include "Include.h"
#include "LineInfo.h"
#include "types/Types.h"
#include "utils/CollectionUtils.h"
#include "utils/PrinterUtils.h"
#include <k... |
AndersenSemenov/UTBotCpp | server/test/suites/regression/PR-200/PR-200.c | /*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#include "pair.h"
struct double_pair {
struct pair *p1;
struct pair *p2;
};
int sum_double_pairs(struct double_pair *p) {
return sum(p->p1) + sum(p->p2);
}
|
AndersenSemenov/UTBotCpp | server/src/printers/HeaderPrinter.h | /*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#ifndef UNITTESTBOT_HEADERPRINTER_H
#define UNITTESTBOT_HEADERPRINTER_H
#include "Printer.h"
#include "ProjectContext.h"
#include "types/Types.h"
namespace printer {
class HeaderPrinter : Printer {
public:
HeaderPri... |
AndersenSemenov/UTBotCpp | server/src/types/ArrayType.h | /*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#ifndef UNITTESTBOT_ARRAYTYPE_H
#define UNITTESTBOT_ARRAYTYPE_H
#include "AbstractType.h"
class ArrayType : public AbstractType {
public:
explicit ArrayType(unsigned long int size, bool complete) : size(size), complete(complete... |
AndersenSemenov/UTBotCpp | server/src/testgens/FunctionTestGen.h | <gh_stars>0
/*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#ifndef UNITTESTBOT_FunctionTESTGEN_H
#define UNITTESTBOT_FunctionTESTGEN_H
#include "LineTestGen.h"
#include "ProjectTestGen.h"
class FunctionTestGen final : public LineTestGen {
public:
FunctionTestGen(const tests... |
AndersenSemenov/UTBotCpp | server/test/suites/regression/PR-200/pair.c | <gh_stars>0
/*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#include "pair.h"
struct pair {
int x, y;
};
int sum(struct pair *p) {
if (p) {
return p->x + p->y;
}
return 0;
} |
AndersenSemenov/UTBotCpp | server/src/coverage/CoverageTool.h | /*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#ifndef UNITTESTBOT_COVERAGETOOL_H
#define UNITTESTBOT_COVERAGETOOL_H
#include "Coverage.h"
#include "ProjectContext.h"
#include "UnitTest.h"
#include "streams/IStreamWriter.h"
#include "streams/WriterUtils.h"
#include "utils/Makefi... |
AndersenSemenov/UTBotCpp | server/src/visitors/KleeAssumeVisitor.h | /*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#ifndef UNITTESTBOT_KLEEASSUMEVISITOR_H
#define UNITTESTBOT_KLEEASSUMEVISITOR_H
#include "AbstractValueViewVisitor.h"
#include "Tests.h"
#include "printers/KleePrinter.h"
namespace visitor {
class KleeAssumeVisitor : public Abs... |
AndersenSemenov/UTBotCpp | server/src/coverage/GcovCoverageTool.h | <filename>server/src/coverage/GcovCoverageTool.h<gh_stars>0
/*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#ifndef UNITTESTBOT_GCOVCOVERAGETOOL_H
#define UNITTESTBOT_GCOVCOVERAGETOOL_H
#include "Coverage.h"
#include "CoverageAndResultsGenerator.h"
#include "CoverageTool.h"
clas... |
AndersenSemenov/UTBotCpp | server/src/utils/LogUtils.h | <gh_stars>0
/*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#ifndef UNITTESTBOT_LOGUTIL_H
#define UNITTESTBOT_LOGUTIL_H
#include "TimeUtils.h"
#include "utils/path/FileSystemPath.h"
class Server;
namespace LogUtils {
static const std::string TEST_CLIENT = "UnitTestBot";
... |
AndersenSemenov/UTBotCpp | server/src/utils/StringUtils.h | /*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#ifndef UNITTESTBOT_STRINGUTIL_H
#define UNITTESTBOT_STRINGUTIL_H
#include "StringFormat.h"
#include "CollectionUtils.h"
#include "utils/path/FileSystemPath.h"
#include <iterator>
#include <memory>
#include <sstream>
#include <stri... |
AndersenSemenov/UTBotCpp | server/src/printers/KleePrinter.h | <filename>server/src/printers/KleePrinter.h
/*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#ifndef UNITTESTBOT_KLEEPRINTER_H
#define UNITTESTBOT_KLEEPRINTER_H
#include "PathSubstitution.h"
#include "Printer.h"
#include "ProjectContext.h"
#include "Tests.h"
#include "LineInfo.h"
... |
AndersenSemenov/UTBotCpp | server/src/clang-utils/SourceToHeaderRewriter.h | /*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#ifndef UNITTESTBOT_SOURCETOHEADERREWRITER_H
#define UNITTESTBOT_SOURCETOHEADERREWRITER_H
#include "Paths.h"
#include "SettingsContext.h"
#include "SimpleFrontendActionFactory.h"
#include "Tests.h"
#include "building/BuildDatabase.h... |
AndersenSemenov/UTBotCpp | server/src/printers/CCJsonPrinter.h | /*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#ifndef UNITTESTBOT_CCJSONPRINTER_H
#define UNITTESTBOT_CCJSONPRINTER_H
#include "KleeGenerator.h"
#include "Printer.h"
#include <string>
namespace printer {
class CCJsonPrinter : Printer {
public:
static const std... |
AndersenSemenov/UTBotCpp | server/test/suites/regression/PR-200/pair.h | /*
* Copyright (c) Huawei Technologies Co., Ltd. 2012-2021. All rights reserved.
*/
#ifndef UNITTESTBOT_PAIR_H
#define UNITTESTBOT_PAIR_H
struct pair;
int sum(struct pair *p);
#endif // UNITTESTBOT_PAIR_H
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.