command stringlengths 2 75 | syntax stringlengths 0 289k | hierarchy_level stringlengths 0 6.91k | description stringlengths 0 45.2k | options listlengths 0 499 | required_privilege_level stringlengths 0 330k | release_information stringlengths 0 3.14k | related_documentation listlengths 0 22 |
|---|---|---|---|---|---|---|---|
source (PIM RPF Selection) | source source-address {
next-hop next-hop-address;
} | [edit routing-instances routing-instance-name protocols pim rpf-selection group group-address],
[edit routing-instances routing-instance-name protocols pim rpf-selection prefix-list prefix-
list-addresses] | Configure the source address for the PIM group. | [
{
"name": "source-address",
"desc": "Specific source address for the PIM group."
}
] | view-level—To view this statement in the configuration.
control-level—To add this statement to the configuration. | Statement introduced in JUNOS Release 10.4. | [
"Example: Configuring PIM RPF Selection"
] |
source (Protocols IGMP) | source ip-address {
source-count number;
source-increment increment;
} | [edit logical-systems logical-system-name protocols igmp interface interface-name static group
multicast-group-address],
[edit protocols igmp interface interface-name static group multicast-group-address] | Specify the IP version 4 (IPv4) unicast source address for the multicast group being statically configured
on an interface. | [
{
"name": "ip-address",
"desc": "IPv4 unicast address."
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Enabling IGMP Static Group Membership"
] |
source (Protocols MLD) | source ip-address {
source-count number;
source-increment increment;
} | [edit logical-systems logical-system-name protocols mld interface interface-name static group
multicast-group-address],
[edit protocols mld interface interface-name static group multicast-group-address] | IP version 6 (IPv6) unicast source address for the multicast group being statically configured on an
interface. | [
{
"name": "ip-address",
"desc": "One or more IPv6 unicast addresses."
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Enabling MLD Static Group Membership"
] |
source (Protocols MSDP) | source ip-address</prefix-length> {
active-source-limit {
maximum number;
threshold number;
}
} | [edit logical-systems logical-system-name protocols msdp],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
msdp],
[edit protocols msdp],
[edit routing-instances routing-instance-name protocols msdp] | Limit the number of active source messages the routing device accepts from sources in this address
range.
Default
If you do not include this statement, the routing device accepts any number of MSDP active source
messages. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Example: Configuring MSDP with Active Source Limits and Mesh Groups"
] |
source (Routing Instances Provider Tunnel Selective) | source source-address {
ldp-p2mp;
pim-ssm {
group-range multicast-prefix;
}
rsvp-te {
label-switched-path-template {
(default-template | lsp-template-name);
}
static-lsp lsp-name;
}
threshold-rate number;
} | [edit logical-systems logical-system-name routing-instances routing-instance-name provider-
tunnel selective group address],
[edit routing-instances routing-instance-name provider-tunnel selective group address] | Specify the IP address for the multicast source. This statement is a part of the point-to-multipoint LSP
and PIM-SSM GRE selective provider tunnel configuration for MBGP MVPNs. | [
{
"name": "source-address",
"desc": "IP address for the multicast source."
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.5. | [
"Configuring Point-to-Multipoint LSPs for an MBGP MVPN",
"Configuring PIM-SSM GRE Selective Provider Tunnels"
] |
source (Routing Instances) | source source-address {
rate threshold-rate;
} | [edit logical-systems logical-system-name routing-instances routing-instance-name protocols pim
mdt threshold group group-address],
[edit logical-systems logical-system-name routing-instances routing-instance-name provider-
tunnel family intet | inet6mdt threshold group group-address],
[edit routing-instances routing-... | Establish a threshold to trigger the automatic creation of a data MDT for the specified unicast address or
prefix of the source of multicast information. | [
{
"name": "source-address",
"desc": "Explicit unicast address of the multicast source."
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. In Junos OS Release 17.3R1, the mdt hierarchy was
moved from provider-tunnel to the provider-tunnel family inet and provider-tunnel family inet6 hierarchies as
part of an upgrade to add IPv6 support for default MDT in Rosen 7, and data MDT for Rosen 6 and
Rosen 7. The p... | [
"Example: Configuring Data MDTs and Provider Tunnels Operating in Source-Specific Multicast Mode",
"Example: Configuring Data MDTs and Provider Tunnels Operating in Any-Source Multicast Mode"
] |
source (Security Source NAT) | source {
address-persistent;
interface (port-overloading off | port-overloading-factor number | enhanced-port-overloading-
algorithm);
pool pool-name {
address ip-address {
to ip-address;
}
address-persistent subscriber ipv6-prefix-length prefix-length;
address-p... | [edit security nat source pool pool-name port] | Configure source NAT, which allows you to configure the following:
•
Translate source IP address or addresses to the egress interface's IP address.
•
Translate a range of source IP addresses to another range of IP addresses. This mapping is dynamic
and without PAT.
•
Translate a range of source IP addresses to another ... | [] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement modified in Junos OS Release 9.6. The description option added in Junos OS Release 12.1.
Statement modified in Junos OS Release 12.1X45-D10. Statement modified in Junos OS Release
12.1X47-D10. Statement modified in Junos OS Release 12.3X48-D10. Statement modified in Junos OS
Release 15.1X49-D60. The enhanced-... | [] |
source (SNMP Scripts) | source url; | [edit system scripts snmp file filename] | Specify the location of the master source file for an SNMP script. When you issue the set refresh
configuration mode command at the same hierarchy level, the local copy of the script is overwritten by
the version stored at the specified URL. If the load-scripts-from-flash statement is configured, the device
refreshes t... | [
{
"name": "url",
"desc": "The source specified as an HTTPS URL, HTTP URL, FTP URL, or scp-style remote file specification. If you specify an HTTPS URL, you must also configure the cert-file statement at the same hierarchy level. Specify the path to the certificate (Root CA or self-signed) that the device wi... | maintenance—To view or add this statement in the configuration. | Statement introduced in Junos OS Release 15.1. | [
"Configure and Use a Master Source Location for a Script",
"Overview of Updating Scripts from a Remote Source"
] |
source (Source-Specific Multicast) | source [ addresses ]; | [edit logical-systems logical-system-name routing-instances routing-instance-name routing-
options multicast ssm-map ssm-map-name],
[edit logical-systems logical-system-name routing-options multicast ssm-map ssm-map-name],
[edit routing-instances routing-instance-name routing-options multicast ssm-map ssm-map-name],
[e... | Specify IPv4 or IPv6 source addresses for an SSM map. | [
{
"name": "addresses",
"desc": "IPv4 or IPv6 source addresses."
}
] | routing—To view this statement in the configuration.
routing-control—To view this statement in the configuration. | Statement introduced in Junos OS Release 7.4. | [
"Example: Configuring SSM Mapping"
] |
source interfaces | source interfaces (external | interface-name)
hold-off-time time;
priority number;
quality-level (prc | prs | sec | smc | ssu-a | ssu-b | st2 | st3 | st3e | st4 | stu | tnc);
request (force-switch | lockout);
wait-to-restore minutes;
aggregated-ether aggregated–ether-group-name;
} | [edit chassis synchronization] | Configure the clock source that is used by the clock selection process on an interface.
•
(SCB only) Specify the timeTransmitter clock source as the external-a interface and the secondary
clock source as the external-b interface. The clock source is chosen using the clock selection process.
•
(SCBE only) Specify the ex... | [
{
"name": "time",
"desc": "Amount of time in milliseconds that a signal is held before being passed to the clock selection process. Range: 300–1800 milliseconds Default: 1000 milliseconds"
},
{
"name": "number",
"desc": "Set the priority level of the clock source. Range: 1 through 5"
},
{
... | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.2R4. | [] |
source | source {
ip address</prefix-length>;
port-range {
tcp [ ports-and-port-ranges ];
udp [ ports-and-port-ranges ];
}
} | [edit services application-identification rule rule-name address address-name] | Define source properties for application-identification rule processing.
The remaining statements are explained separately. See CLI Explorer. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.5. | [
"Configuring APPID Rules"
] |
source-active-advertisement | source-active-advertisement {
dampen minutes;
min-rate seconds;
} | [edit logical-systems logical-system--name protocols mvpn mvpn-mode spt-only],
[edit logical-systems logical-system--name routing-instances instance-name protocols mvpn mvpn-
mode spt-only],
[edit routing-instances instance-name protocols mvpn mvpn-mode spt-only] | Attributes associated with advertising Source-Active A-D routes. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 17.1. | [
"Configuring SPT-Only Mode for Multiprotocol BGP-Based Multicast VPNs"
] |
source-address (AACL) | source-address address; | [edit services aacl rule rule-name term term-name from] | Specify the source address for rule matching. | [
{
"name": "address",
"desc": "Source IPv4 or IPv6 address or prefix value."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.5.
IPv6 support introduced in Junos OS Release 12.2. | [
"Configuring Match Conditions in AACL Rules"
] |
source-address (Access LDAP) | source-address source-address; | [edit access ldap-server server-address],
[edit access profile profile-name ldap-server server-address] | Configure a source address for each configured LDAP server. Each LDAP request sent to a LDAP server
uses the specified source address. | [
{
"name": "source-address",
"desc": "Valid IP address configured on one of the device interfaces."
}
] | access—To view this statement in the configuration.
access-control—To add this statement to the configuration. | Statement introduced in Release 8.5 of Junos OS. | [
"Example: Configuring RADIUS and LDAP User Authentication"
] |
source-address (Access RADIUS) | source-address source-address; | [edit access radius-server server-address],
[edit access profile profile-name radius-server server-address] | Configure a source address for each configured RADIUS server. Each RADIUS request sent to a RADIUS
server uses the specified source address. | [
{
"name": "source-address",
"desc": "Valid IP address configured on one of the device interfaces."
}
] | secret—To view this statement in the configuration.
secret-control—To add this statement to the configuration. | Statement modified in Junos OS Release 8.5. | [
"Firewall User Authentication Overview"
] |
source-address (Content Security) | source-address address; | [edit security utm default-configuration web-filtering juniper-enhanced server]
[edit security utm default-configuration web-filtering websense-redirect server]
[edit security utm default-configuration anti-virus sophos-engine server]
[edit security utm feature-profile web-filtering websense-redirect profile profile-na... | You can configure source address for Enhanced Web Filtering (EWF) cloud service, websense redirect
policy service, antivirus scan service, and antispam scan service. Configuring a source address for these
Content Security services enhance the network disaster recovery. Since the antivirus and antispam scan
services sha... | [
{
"name": "address",
"desc": "Source address."
}
] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 21.1R1. | [] |
source-address (Dynamic Tunnel) | source-address address; | [edit logical-systems logical-system-name routing-instances routing-instance-name routing-
options dynamic-tunnels tunnel-name],
[edit logical-systems logical-system-name routing-options dynamic-tunnels tunnel-name],
[edit routing-instances routing-instance-name routing-options dynamic-tunnels tunnel-name],
[edit routi... | Configure the tunnel source address. | [
{
"name": "address",
"desc": "Name of the source address."
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Dynamic Tunnels Overview"
] |
source-address (Forwarding Options) | source-address address; | [edit forwarding-options accounting name output interface interface-name],
[edit forwarding-options monitoring name family family inet output interface interface-name],
[edit forwarding-options sampling instance instance-name family (inet |inet6 |mpls | vpls) output
interface interface-name],
[edit forwarding-options ... | Specify the source address for monitored packets. | [
{
"name": "address",
"desc": "Interface source address."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4.
Support for IPv6 addresses for the source-address address statement within sampling instances introduced
in Junos OS Evolved Release 23.1R1. | [
"Configuring Discard Accounting",
"Configuring Flow Monitoring",
"Configuring Traffic Sampling on MX, M and T Series Routers"
] |
source-address (IDS MS-DPC) | source-address (address | any-unicast) <except>; | [edit services ids rule rule-name term term-name from] | Specify the source address for rule matching when using the MS-DPC. | [
{
"name": "address",
"desc": "Source IPv4 or IPv6 address or prefix value."
},
{
"name": "any-unicast",
"desc": "Any unicast packet."
},
{
"name": "except",
"desc": "(Optional) Exempt the specified address, prefix, or unicast packets from rule matching."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4.
address option enhanced to support IPv4 and IPv6 addresses in Junos OS Release 8.5. | [
"Configuring Match Conditions in IDS Rules"
] |
source-address (IGMP and MLD Snooping) | source-address ip-address; | [edit bridge-domains bridge-domain-name protocols igmp-snooping proxy],
[edit bridge-domains bridge-domain-name protocols igmp-snooping vlan vlan-id proxy],
[edit routing-instances routing-instance-name bridge-domains bridge-domain-name protocols igmp-
snooping proxy],
[edit routing-instances routing-instance-name bri... | Specify the IP address to use as the source for IGMP snooping or MLD snooping reports in proxy mode.
Reports are sent with address 0.0.0.0 as the source address unless there is a source address configured.
You can also use this statement to configure the source address to use for IGMP snooping or MLD
snooping queries. | [
{
"name": "ip-address",
"desc": "IP address to use as the source for proxy-mode IGMP snooping or MLD snooping reports."
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.5. | [
"Example: Configuring IGMP Snooping"
] |
source-address (LRF Profile) | source-address source-address; | [edit services lrf profile profile-name collector collector-name] | Configure the source address to be used when exporting data to the collector. | [
{
"name": "source-address",
"desc": "IP address to be used as the source address."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 17.1.
Support for Next Gen Services introduced in Junos OS Release 19.3R1 on MX Series. | [
"Configuring Logging and Reporting for Junos OS Subscriber Aware",
"Configuring an LRF Profile for Subscribers",
"Configuring Logging and Reporting for Subscriber Management"
] |
source-address (NAT Next Gen Services) | source-address (address | any-unicast); | [edit services nat destination rule-set rule-set rule rule-name match],
[edit services nat source rule-set rule-set rule rule-name match] | Specify the source address that the packet must match for the NAT rule to take effect. | [
{
"name": "address",
"desc": "A specific address that must be matched."
},
{
"name": "any-unicast",
"desc": "Any unicast source address results in a match."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 19.3R2. | [] |
source-address (Next Gen Services Service-Set Remote System Logging) | source-address address; | edit services service-set name syslog | Specify the IP address of the source for Next Gen Services system log messages.
BEST PRACTICE: The syslog source address can be any arbitrary IP address. It does not
have to be an IP address that is assigned to the device. Rather, this IP address is used on
the syslog collector to identify the syslog source. The best p... | [] | system | Statement introduced in Junos OS Release 19.3R2. | [
"Understanding Next Gen Services CGNAT Global System Logging",
"Enabling Global System Logging for Next Gen Services",
"Configuring System Logging to One or More Remote Servers for Next Gen Services",
"Configuring Local System Logging for Next Gen Services"
] |
source-address (PCP) | source-addressaddress <except>; | [edit services pcp rule rule-name term term-name from] | Specify the source address that must be matched for the PCP rule. A PCP rule assigns the PCP server
that handles selected traffic.
PCP is supported on the MS-DPC, MS-100, MS-400, and MS-500 MultiServices PICS. Starting in Junos
OS Release 17.4R1, PCP is also supported on the MS-MPC and MS-MIC. | [
{
"name": "address",
"desc": "Destination address or prefix value."
},
{
"name": "except",
"desc": "(Optional) Prevent the specified address or prefix from matching the PCP rule."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 13.2R1. | [
"Configuring Port Control Protocol"
] |
source-address (RADIUS, System Logging, or TACACS+) | source-address source-address; | [edit system accounting destination radius server server-address],
[edit system accounting destination tacplus server server-address],
[edit system radius-server server-address],
[edit system syslog],
[edit system tacplus-server server-address] | Specify a source address for each configured TACACS+ server, RADIUS server, or the source address to
record in system log messages that are directed to a remote machine. | [
{
"name": "source-address",
"desc": "Valid IP address configured on one of the switch interfaces. For system logging, the"
}
] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.1. | [
"Configuring RADIUS Authentication (QFX Series or OCX Series)",
"Synchronizing and Coordinating Time Distribution Using NTP",
"Specifying an Alternative Source Address for System Log Messages Directed to a Remote Destination"
] |
source-address (Routing Options) | source-address address; | [edit logical-systems logical-system-name routing-instances routing-instance-name routing-options
dynamic-tunnels tunnel-name],
[edit logical-systems logical-system-name routing-options dynamic-tunnels tunnel-name],
[edit routing-instances routing-instance-name routing-options dynamic-tunnels tunnel-name],
[edit routi... | Specify the source address for the generic routing encapsulation (GRE) tunnels. The source address
specifies the address used as the source for the local tunnel endpoint. This address can be any local
address on the router, typically the router ID or the loopback address. | [
{
"name": "address",
"desc": "Name of the source address."
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Configuring GRE Tunnels for Layer 3 VPNs"
] |
source-address (RPM) | source-address address; | [edit services monitoring rpm owner name test name] | Specify the source IP address used for probes. If the source IP address is not one of the router’s or
switch’s assigned addresses, the packet uses the outgoing interface’s address as its source. Prior to
Junos OS Evolved Release 23.1R1, only IPv4 addresses are supported for Junos OS Evolved.
The following addresses can... | [
{
"name": "address",
"desc": "Valid IP address. You cannot configure this statement if the address configured for the target"
}
] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Statement introduced in Junos OS Release 13.2 for PTX Series Packet Transport routers.
Statement introduced in Junos OS Evolved Release 20.1R1.
Support for IPv6 addresses added in Junos OS Evolved 23.1... | [
"Configuring RPM Probes on M, MX and T Series Routers and EX Series Switches"
] |
source-address (Security Destination NAT) | source-address [ip-address]; | [edit security nat destination rule-set rule-set-name rule rule-name match] | Specify source address to match the rule. You can configure multiple addresses or subnets. | [
{
"name": "ip-address",
"desc": "Source address or a subnet."
}
] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement modified in Junos OS Release 9.6. | [] |
source-address (Security IDP Policy) | source-address ([address-name] | any | any-ipv4 | any-ipv6); | [edit security idp idp-policy policy-name rulebase-exempt rule rule-name match]
[edit security idp idp-policy policy-name rulebase-ips rule rule-name match] | Specify a source IP address or IP address set object to be used as the match source address object. The
default value is any. | [
{
"name": "address-name",
"desc": "IP address or IP address set object."
},
{
"name": "any",
"desc": "Specify any IPv4 or IPv6 address."
},
{
"name": "any-ipv4",
"desc": "Specify any IPv4 address."
},
{
"name": "any-ipv6",
"desc": "Specify any IPv6 address."
}
] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.2. | [] |
source-address (Security IDP Sensor Configuration) | source-address ip-address; | [edit security idp sensor-configuration packet-log] | Configure the source IP address for the carrier UDP packet. | [] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 10.2. | [] |
source-address (Security IDP) | source-address address; | [edit security idp security-package] | Sets the source address to be used for sending download requests. | [] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | [] | |
source-address (Security Policies) | source-address {
[address];
any;
any-ipv4;
any-ipv6;
} | [edit security policies from-zone zone-name to-zone zone-name policy policy-name match]
[edit security policies global policy policy-name match] | Define the matching criteria. You can specify one or more IP addresses, address sets, or wildcard
addresses. You can specify wildcards any, any-ipv4, or any-ipv6. | [
{
"name": "address",
"desc": "IP addresses, address sets, or wildcard addresses (represented as A.B.C.D/wildcard-mask). You"
}
] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.5. Support. | [
"Security Policies Overview",
"Understanding Security Policy Rules",
"Understanding Security Policy Elements"
] |
source-address (Security Source NAT) | source-address [ip-address]; | [edit security nat source rule-set rule-set-name rule rule-name match] | Specify source address to match the rule. You can configure multiple addresses or subnets. | [
{
"name": "ip-address",
"desc": "Source address or a subnet."
}
] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement modified in Junos OS Release 9.6. | [] |
source-address (Security Static NAT Rule Set) | source-address [ip-address]; | [edit security nat static rule-set rule-set-name rule rule-name match] | Specify the source address to match the rule. Up to 8 addresses are supported. | [
{
"name": "ip-address",
"desc": "Source address."
}
] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.1X45-D10. | [] |
source-address (Service Sets) | source-address source-address | [edit services service-set service-set-name syslog host hostname] | Specify a source address to record in system log messages that are directed to a remote machine
specified in the hostname statement.
NOTE: The supported interfaces are ms, rms, and mams interfaces. If you do not specify
the interface parameter, the command loops on all supported interfaces. | [
{
"name": "source-address",
"desc": "A valid IP address, which is recorded as the message source in messages sent to the remote machines specified in the host hostname statement"
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 13.1. | [
"Configuring System Logging for Service Sets"
] |
source-address (Services CoS) | source-address address; | [edit services cos rule rule-name term term-name from] | Source address for rule matching. | [
{
"name": "address",
"desc": "Source IPv4 or IPv6 address or prefix value."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 8.1.
address option enhanced to support IPv4 and IPv6 addresses in Junos OS Release 8.5. | [
"Configuring CoS Rules on Services PICs",
"Configuring Match Conditions In CoS Rules"
] |
source-address (Services IPSec VPN) | source-address address; | [edit services ipsec-vpn rule rule-name term term-name from] | Specify the source address for rule matching. | [
{
"name": "address",
"desc": "Source IP address."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Configuring IPsec Rules"
] |
source-address (Services NAT) | source-address (address | any-unicast) <except>; | [edit services nat rule rule-name term term-name from] | Specify the source address for rule matching. | [
{
"name": "address",
"desc": "Source IPv4 or IPv6 address or prefix value."
},
{
"name": "any-unicast",
"desc": "Any unicast packet."
},
{
"name": "except",
"desc": "(Optional) Prevent the specified address or unicast packets from being translated."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4.
any-unicast and except options introduced in Junos OS Release 7.6.
address option enhanced to support IPv6 addresses in Junos OS Release 8.5. | [
"Network Address Translation Rules Overview"
] |
source-address (Services Stateful Firewall) | source-address (address | any-ipv4 | any-ipv6 | any-unicast ) <except>; | [edit services stateful-firewall rule rule-name term term-name from] | Source address for rule matching. | [
{
"name": "address",
"desc": "Source IPv4 or IPv6 address or prefix value."
},
{
"name": "any-ipv4",
"desc": "Any IPv4 packet."
},
{
"name": "any-ipv6",
"desc": "Any IPv6 packet."
},
{
"name": "any-unicast",
"desc": "Any unicast packet."
},
{
"name": "except",
... | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4.
any-unicast and except options introduced in Junos OS Release 7.6.
address option enhanced to support IPv4 and IPv6 addresses in Junos OS Release 8.5. | [
"Configuring Match Conditions in Stateful Firewall Rules"
] |
source-address (SNMP) | source-address address; | [edit snmp trap-options] | Set the source address of every SNMP trap packet sent by this router to a single address regardless of
the outgoing interface. If the source address is not specified, the default is to use the address of the
outgoing interface as the source address. | [
{
"name": "address",
"desc": "Source address of SNMP traps. You can configure the source address of trap packets two ways:"
}
] | snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [] |
source-address (SRC Software) | source-address source-address; | [edit system services service-deployment] | Enable Junos OS to work with the Session and Resource Control (SRC) software. | [
{
"name": "source-address",
"desc": "Local IPv4 address to be used as source address for traffic to the SRC server. The source"
}
] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Configuring the Junos OS to Work with SRC Software"
] |
source-address (Subscriber Secure Policy) | source-address address; | [edit services radius-flow-tap policy policy-name inet drop-policy rule-name from],
[edit services radius-flow-tap policy policy-name inet6 drop-policy rule-name from] | Specify source IP address or prefix value from which to inherit configuration data for radius-flow-tap
policy rule mapping. | [
{
"name": "address",
"desc": "IPv4 or IPv6 address for the radius-flow-tap policy."
}
] | flow-tap—To view this statement in the configuration.
flow-tap-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.3. | [
"Subscriber Secure Policy Overview",
"Configuring RADIUS-Initiated Subscriber Secure Policy Mirroring Overview"
] |
source-address (System Logging) | source-address source-address <routing-instance routing-instance-name>; | [edit system syslog] | Specify a source address to record in system log messages that are directed to a remote machine. | [
{
"name": "source-address",
"desc": "A valid IP address configured on one of the device interfaces. For system logging, the"
},
{
"name": "routing-instance routing-instance-name",
"desc": "(Optional) The routing instance name in which the source address is"
}
] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [] |
source-address (TWAMP) | source-address address; | [edit services rpm twamp client control-connection connection-name test-session session-name | Specify the source IP address used for probes. If the source IP address is not one of the router’s or
switch’s assigned addresses, the packet uses the outgoing interface’s address as its source.
The following IPv4 addresses cannot be used as the source IP address used for probes:
•
0.0.0.0
•
127.0.0.0/8 (loopback)
•
2... | [
{
"name": "address",
"desc": "Valid IPv4 or IPv6 address. You can only specify an IPv6 address as the source address if the source address corresponds to a TWAMP Light IPv6 link-local target address."
}
] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 21.4R1. | [] |
source-address | source-address ip-address; | [edit firewall family family-name filter filter-name term term-name from],
[edit firewall family family-name filter filter-name term term-name from ip-version ip-version] | IP source address field, which is the address of the source node sending the packet. You cannot specify
the source-address and address match conditions in the same term.
For IPv4, the source-address field is 32 bits in length. The filter description syntax supports either a
mask value that can be noncontiguous, such as... | [] | firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 10.1R1. | [
"Firewall Filter Match Conditions Based on Address Fields",
"Firewall Filter Match Conditions for IPv4 Traffic",
"Firewall Filter Match Conditions for IPv6 Traffic",
"Firewall Filter Match Conditions for MPLS-Tagged IPv4 or IPv6 Traffic",
"Guidelines for Configuring Simple Filters"
] |
source-address-excluded | source-address-excluded; | [edit security policies from-zone zone-name to-zone zone-name policy policy-name match] | Exclude the source address(es) from the policy.
NOTE: IPv6 does not support address-excluded in security policies match. | [] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.1X45-D10. | [
"Security Policies Overview"
] |
source-address-filter (Interfaces) | source-address-filter mac-address; | [edit interfaces interface-name redundant-ether-options] | For redundant Ethernet interfaces, specify the MAC addresses from which the interface can receive
packets. For this statement to have any effect, you must include the source-filtering statement in the
configuration to enable source address filtering.
Be sure to update the MAC address if the remote Ethernet card is repl... | [
{
"name": "mac-address",
"desc": "MAC address filter. You can specify the MAC address as six hexadecimal bytes in one of the"
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement modified in Junos OS Release 9.2. | [
"Understanding Ethernet Interfaces"
] |
source-address-filter | source-address-filter {
mac-address;
} | [edit interfaces interface-name aggregated-ether-options],
[edit interfaces interface-name fastether-options],
[edit interfaces interface-name gigether-options] | For aggregated Ethernet, Fast Ethernet, Gigabit Ethernet, Gigabit Ethernet IQ interfaces, and Gigabit
Ethernet PICs with SFPs (except the 10-port Gigabit Ethernet PIC and the built-in Gigabit Ethernet port
on the M7i router), specify the MAC addresses from which the interface can receive packets. For this
statement to ... | [
{
"name": "mac-address",
"desc": "MAC address filter. You can specify the MAC address as nn:nn:nn:nn:nn:nn or nnnn.nnnn.nnnn,"
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Configuring MAC Address Filtering for Ethernet Interfaces",
"Configuring MAC Address Filtering on PTX Series Packet Transport Routers"
] |
source-address-filter-list | [edit logical-systems logical-system-name policy-statement policy-statement-name term term-name
from],
[edit policy-options policy-statement policy-statement-name term term-name from] | The source address filter list is a user configured list of individual source address filters, typically used to
match an incoming route address to unicast source addresses in Multiprotocol BGP (MBGP) and
Multicast Source Discovery Protocol (MSDP) environments, that you create at the [edit policy-options]
hierarchy lev... | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement first introduced in Junos OS Release 16.1 on M Series, MX Series, and T Series. | [] | |
source-address-giaddr | source-address-giaddr; | [edit forwarding-options helpers bootp],
[edit forwarding-options helpers bootp interface interface-name] | Configure the gateway IP address (giaddr) as the source IP address of the switch for relayed DHCP
packets when the switch is used as the DHCP relay agent.
When this statement is entered in the [edit forwarding-options helpers bootp] hierarchy, the gateway IP
address is configured as the source IP address of the switch... | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 10.1. | [
"DHCP/BOOTP Relay for Switches Overview"
] |
source-address-name (NAT Next Gen Services) | source-address-name address-name; | [edit services nat destination rule-set rule-set rule rule-name match],
[edit services nat source rule-set rule-set rule rule-name match] | Specify the name of the range of source addresses that the packet must match for the NAT rule to take
effect. The range of addresses is configured with the address statement at the [edit services address-book
global] hierarchy level. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 19.3R2. | [] |
source-address-name (Security Destination NAT) | source-address-name [address-name]; | [edit security nat destination rule-set rule-set-name rule rule-name match] | Specify a source address name to match the rule. You can configure multiple address names. | [
{
"name": "address-name",
"desc": "Source address name."
}
] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement modified in Junos OS Release 9.6. | [] |
source-address-name (Security Source NAT) | source-address-name [address-name]; | [edit security nat source rule-set rule-set-name rule rule-name match] | Specify a source address name to match the rule. You can configure multiple address names. | [
{
"name": "address-name",
"desc": "Source address name."
}
] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement modified in Junos OS Release 9.6. | [] |
source-address-name (Security Static NAT Rule Set) | source-address-name [address-name]; | [edit security nat static rule-set rule-set-name rule rule-name match] | Specify a source address name to match the rule. Up to 8 address names are supported. | [
{
"name": "address-name",
"desc": "Source address name."
}
] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.1X45-D10. | [] |
source-address-range (IDS MS-DPC) | source-address-range low minimum-value high maximum-value <except>; | [edit services ids rule rule-name term term-name from] | Specify the source address range for rule matching when using the MS-DPC. | [
{
"name": "minimum-value",
"desc": "Lower boundary for the IPv4 or IPv6 address range."
},
{
"name": "maximum-value",
"desc": "Upper boundary for the IPv4 or IPv6 address range."
},
{
"name": "except",
"desc": "(Optional) Exempt the specified address range from rule matching."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 7.6.
minimum-value and maximum-value options enhanced to support IPv4 and IPv6 addresses in Junos OS
Release 8.5. | [
"Configuring Match Conditions in IDS Rules"
] |
source-address-range (PCP) | source-address-range high maximum-value low minimum-value <except>; | [edit services pcp rule rule-name term term-name from] | Specify the source address range that must be matched for the PCP rule. A PCP rule assigns the PCP
server that handles selected traffic.
PCP is supported on the MS-DPC, MS-100, MS-400, and MS-500 MultiServices PICS. Starting in Junos
OS Release 17.4R1, PCP is also supported on the MS-MPC and MS-MIC. | [
{
"name": "maximum-value",
"desc": "Upper boundary for the address range."
},
{
"name": "minimum-value",
"desc": "Lower boundary for the address range."
},
{
"name": "except",
"desc": "(Optional) Prevent the specified address range from matching the PCP rule."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 13.2R1. | [
"Configuring Port Control Protocol"
] |
source-address-range (Services NAT) | source-address-range low minimum-value high maximum-value <except>; | [edit services nat rule rule-name term term-name from] | Specify the source address range for rule matching. | [
{
"name": "minimum-value",
"desc": "Lower boundary for the IPv4 or IPv6 address range."
},
{
"name": "maximum-value",
"desc": "Upper boundary for the IPv4 or IPv6 address range."
},
{
"name": "except",
"desc": "(Optional) Prevent the specified address range from being translated."
... | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 7.6.
minimum-value and maximum-value options enhanced to support IPv6 addresses in Junos OS
Release 8.5. | [
"Network Address Translation Rules Overview"
] |
source-address-range (Services Stateful Firewall) | source-address-range low minimum-value high maximum-value <except>; | [edit services stateful-firewall rule rule-name term term-name from] | Source address range for rule matching. | [
{
"name": "minimum-value",
"desc": "Lower boundary for the IPv4 or IPv6 address range."
},
{
"name": "maximum-value",
"desc": "Upper boundary for the IPv4 or IPv6 address range."
},
{
"name": "except",
"desc": "(Optional) Exclude the specified address, prefix, or unicast packets from... | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 7.6.
minimum-value and maximum-value options enhanced to support IPv4 and IPv6 addresses in Junos OS
Release 8.5. | [
"Configuring Match Conditions in Stateful Firewall Rules"
] |
source-address-range | source-address-range low minimum-value high maximum-value; | [edit services aacl rule rule-name term term-name from] | Specify the source address range for rule matching. | [
{
"name": "minimum-value",
"desc": "Lower boundary for the IPv4 or IPv6 address range."
},
{
"name": "maximum-value",
"desc": "Upper boundary for the IPv4 or IPv6 address range."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.5.
IPv6 support introduced in Junos OS Release 12.2. | [
"Configuring Match Conditions in AACL Rules"
] |
source-addresses | source-addresses [ addresses ]; | [edit services dynamic-flow-capture capture-group client-name control-source identifier] | List the IP addresses from which the control source can send control protocol requests to the Juniper
Networks router. | [
{
"name": "address",
"desc": "Allowed IP source address."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 7.4. | [
"Configuring the Control Source"
] |
source-attachment-identifier (Protocols VPWS) | source-attachment-identifier identifier; | [edit logical-systems logical-system-name routing-instances routing-instance-name protocols
l2vpn site site-name],
[edit routing-instances routing-instance-name protocols l2vpn site site-name] | For FEC 129, specify the VPWS source attachment identifier. The point-to-point nature of VPWS
requires that you specify the source access individual identifier (SAII) and the target access individual
identifier (TAII). This SAII-TAII pair defines a unique pseudowire between two PE devices.
Auto-discovery routes are use... | [
{
"name": "identifier",
"desc": "The numerical identifier for the Layer 2 VPN site."
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 13.2. | [
"Example: Configuring FEC 129 BGP Autodiscovery for VPWS"
] |
source-based-forwarding | source-based-forwarding next-hop next-table forwarding table name | [edit policy-options policy-statement policy name term term name then] | Source based forwarding is used to provide value added services where paths through the network are
selected based on the packet’s source address. In some deployments, the destination node of the
packet, identified by the protocol next hop, stays the same, but the path through the network may vary.
In some deployments,... | [] | routing
routing-control
interface
interface-control | Statement introduced in Junos OS Evolved Release 24.4R1 | [] |
source-bmac | source-bmac <mac-address> <length> [auto]; | [edit interfaces interface-name unit unit esi],
[edit routing-instances routing-instance-name service-groups service-group-name pbb-service-
options ] | Set a shared source Provider Backbone Bridging (PBB) MAC (B-MAC) address for all service identifiers
(ISIDs) under a specified routing instance. If a source B-MAC address is derived automatically from the
aggregated Ethernet system ID, you must specify the auto keyword.
For PBB-Ethernet VPN (EVPN) functionality, one se... | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 16.1.
Support at the [edit interfaces interface-name unit unit esi] hierarchy level introduced in Junos OS Release
18.1R1. | [] |
source-checking | source-checking; | [edit forwarding-options family inet6] | (MX Series 5G Universal Routing Platforms Only) Discard IPv6 packets when the source address type is
unspecified, loopback, multicast, or link-local unicast.
RFC 4291, IP Version 6 Addressing Architecture, refers to four address types that require special
treatment when they are used as source addresses. The four addre... | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.3. | [
"Applying Forwarding Table Filters"
] |
source-class-usage | source-class-usage {
direction;
} | [edit interfaces interface-name unit logical-unit-number family inet accounting],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
family inet accounting],
[edit routing-instances routing-instance-name vrf-table-label] | Enable packet counters on an interface that count packets that arrive from specific prefixes on the
provider core router and are destined for specific prefixes on the customer edge router. | [
{
"name": "direction can be one of the following:",
"desc": ""
},
{
"name": "input",
"desc": "Configure at least one expected ingress point."
},
{
"name": "output",
"desc": "Configure at least one expected egress point."
},
{
"name": "input output",
"desc": "On a single i... | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4.
Support for the vrf-table-label statement added in Junos OS Release 9.3. | [
"Enabling Source Class and Destination Class Usage",
"accounting",
"destination-class-usage",
"Junos OS Services Interfaces Library for Routing Devices"
] |
source-classes | source-classes {
source-class-name;
} | [edit accounting-options class-usage-profile profile-name] | Specify the source classes for which statistics are collected. | [
{
"name": "source-class-name",
"desc": "Name of the source class to include in the class usage profile."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Configuring Accounting Options, Source Class Usage and Destination Class Usage Options"
] |
source-count (Dynamic MLD Interface) | source-count number; | [edit dynamic-profiles profile-name protocols mld interface interface-name static group multicast-
group-address source] | Configure the number of multicast source addresses that should be accepted for each static group
created on dynamic interfaces. | [
{
"name": "number",
"desc": "Number of source addresses."
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 10.1. | [
"Dynamic MLD Configuration Overview",
"Enabling MLD Static Group Membership"
] |
source-count (Protocols IGMP) | source-count number; | [edit logical-systems logical-system-name protocols igmp interface interface-name static group
multicast-group-address source],
[edit protocols igmp interface interface-name static group multicast-group-address source] | Configure the number of multicast source addresses that should be accepted for each static group
created. | [
{
"name": "number",
"desc": "Number of source addresses."
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.6. | [
"Enabling IGMP Static Group Membership"
] |
source-count (Protocols MLD) | source-count number; | [edit logical-systems logical-system-name protocols mld interface interface-name static group
multicast-group-address source],
[edit protocols mld interface interface-name static group multicast-group-address source] | Configure the number of multicast source addresses that should be accepted for each static group
created. | [
{
"name": "number",
"desc": "Number of source addresses."
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.6. | [
"Enabling MLD Static Group Membership"
] |
source-end-user-profile | source-end-user-profile device-identity-profile-name; | [edit security policies from-zone from-zone to-zone to-zone policy policy-name match] | The source-end-user-profile field in a security policy enables you to specify a device identity profile that
identifies the traffic source based on the device from which the traffic issued. The security policy action
is applied to traffic issuing from a device if the device matches the attributes specified in the profi... | [
{
"name": "device-identity-profile-name",
"desc": "Device identity profile that specifies characteristics that can apply to one or more devices."
}
] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 15.1X49-D70. | [
"Understanding Access Control to Network Resources Based on Device Identity Information",
"Understanding the Device Identity Attributes and Profiles for the Integrated User Firewall Device",
"Identity Authentication Feature",
"Understanding the Device Identity Authentication Table and Its Entries",
"source-... |
source-filtering (Interfaces) | (source-filtering | no-source-filtering); | [edit interfaces interface-name redundant-ether-
options] | For redundant Ethernet interfaces, enable the filtering of MAC source addresses, which blocks all
incoming packets to that interface. To allow the interface to receive packets from specific MAC
addresses, include the source-address-filter statement.
If the remote Ethernet card is changed, the interface cannot receive p... | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement modified in Junos OS Release 9.2. | [
"Understanding Ethernet Interfaces"
] |
source-filtering | (source-filtering | no-source-filtering); | [edit interfaces interface-name aggregated-ether-options],
[edit interfaces interface-name fastether-options],
[edit interfaces interface-name gigether-options] | For aggregated Ethernet, Fast Ethernet, Gigabit Ethernet, and Gigabit Ethernet IQ interfaces only, enable
the filtering of MAC source addresses, which blocks all incoming packets to that interface. To allow the
interface to receive packets from specific MAC addresses, include the source-address-filter statement.
If the... | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Configuring MAC Address Filtering for Ethernet Interfaces",
"Configuring MAC Address Filtering on PTX Series Packet Transport Routers"
] |
source-gateway (Tunnel Profile) | source-gateway {
address client-ip-address;
gateway-name client-name;
} | [edit access tunnel-profile profile-name tunnel tunnel-id] | Specify the IP address and hostname of the source gateway at the local L2TP tunnel endpoint, the LAC.
The remaining statements are explained separately. Search for a statement in CLI Explorer or click a
linked statement in the Syntax section for details. | [] | admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 10.4. | [
"L2TP LAC Tunneling for Subscribers"
] |
source-hostname | source-hostname source-hostname; | [edit interfaces name unit name tunnel] | Define the hostname of the tunnel source for the IP tunnel interface.
After the DNS resolves the IP address for the hostname, the resolved address is used as tunnel source
address. The ipip interface (IFL) is not created unless the hostname is resolved.
. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 23.2R1 for SRX Series Firewalls (SRX1500, SRX4100,
SRX4200, SRX5400, SRX5600, SRX5800, and vSRX3.0)
Statement introduced in Junos OS Release 23.4R1 for SRX Series Firewalls (SRX38, SRX300, SRX320,
SRX340, and SRX345) | [
"Tunnel Services Overview"
] |
source-id | source-id source-id; | [edit services flow-monitoring version9 template template-name] | For version 9 flows, a 32-bit value that identifies the Exporter Observation Domain is called the source
ID. NetFlow collectors use the combination of the source IP address and the source ID field to separate
different export streams originating from the same exporter.
MX and QFX Series: Typically, this attribute is us... | [
{
"name": "source-id",
"desc": "Identifier for the source for version 9 flows."
}
] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 14.1.
Statement introduced in Junos OS Evolved 22.4R1. | [
"Configuring Observation Domain ID and Source ID for Version 9 and IPFIX Flows",
"Configuring Template ID and Options Template ID for Version 9 and IPFIX Flows"
] |
source-identity | source-identity {
[user-or-role-name];
any;
authenticated-user;
unauthenticated-user;
unknown-user;
} | [edit security policies from-zone zone-name to-zone zone-name policy policy-name match]
[edit security policies global policy policy-name match]
[edit security advance-policy-based-routing from-zone zone-name policy policy-name match] | Identifies users and roles to be used as match criteria for a policy. If a value other than any is specified as
match criteria for a policy within a zone pair, the traffic is matched to table entries to retrieve associated
user and roles before policy lookup occurs. Users and roles are retrieved from the local authenti... | [
{
"name": "user-or-role-name",
"desc": "A list of specific users and roles. Range: 0 through 39 characters NOTE: SRX Series Firewalls truncate imported roles to 39 characters. You need to ensure that all of your roles are 39 characters or less."
},
{
"name": "any",
"desc": "Any user or role, as... | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.1. Statement updated in Junos OS Release 12.1X44-D10.
Statement is supported in [edit security advance-policy-based-routing from-zone zone-name policy
policy-name match] hierarchy in Junos OS Release 19.1R1. | [
"Understanding User Role Firewalls",
"Understanding the User Identification Table",
"Security Policies Overview"
] |
source-identity-log (Security) | source-identity-log | [edit security zones security-zone zone-name] | Specify the source-identity-log parameter as part of the configuration for a zone to enable it to trigger
user identity logging when that zone is used as the source zone (from-zone) in a security policy. If a zone
is configured for zone-based user identity logging and it is used as the source zone in a security policy,... | [] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 15.1X49-D60. | [
"Understanding How to Include User Identity Information in the Session Log File Based on the Source",
"Zone",
"Example: Configuring Integrated User Firewall to Write User Identity to the Session Log Based On",
"the Source Zone",
"Overview of Integrated User Firewall",
"Example: Configuring Integrated User... |
source-increment (Dynamic MLD Interface) | source-increment increment; | [edit dynamic-profiles profile-name protocols mld interface interface-name static group multicast-
group-address source] | Configure the number of times the address should be incremented for each static group created on the
dynamic interface. The increment is specified in a format similar to an IPv6 address. | [
{
"name": "increment",
"desc": "Number of times the source address should be incremented."
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 10.1. | [
"Dynamic MLD Configuration Overview",
"Enabling MLD Static Group Membership"
] |
source-increment (Protocols IGMP) | source-increment number; | [edit logical-systems logical-system-name protocols igmp interface interface-name static group
multicast-group-address source],
[edit protocols igmp interface interface-name static group multicast-group-address source] | Configure the number of times the multicast source address should be incremented for each static
group created. The increment is specified in dotted decimal notation similar to an IPv4 address. | [
{
"name": "increment",
"desc": "Number of times the source address should be incremented."
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.6. | [
"Enabling IGMP Static Group Membership"
] |
source-increment (Protocols MLD) | source-increment number; | [edit logical-systems logical-system-name protocols mld interface interface-name static group
multicast-group-address source],
[edit protocols mld interface interface-name static group multicast-group-address source] | Configure the number of times the address should be incremented for each static group created. The
increment is specified in a format similar to an IPv6 address. | [
{
"name": "increment",
"desc": "Number of times the source address should be incremented."
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.6. | [
"Enabling MLD Static Group Membership"
] |
source-interface (RADIUS Client) | source-interface interface ipv4-address address; | [edit access radius clients client-name] | Configure the MX Series router interface and IPv4 address that receive RADIUS requests from the
GGSN, PGW, or BNG RADIUS client. | [
{
"name": "interface",
"desc": "Name of the interface."
},
{
"name": "address",
"desc": "IPv4 address on the MX Series router."
}
] | access—To view this statement in the configuration.
access-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 17.1. | [
"Configuring RADIUS Clients That Send Accounting Requests for IP-Based Subscribers"
] |
source-interface (RADIUS Server) | source-interface interface [ipv4-address address]; | [edit access radius servers name] | Specify the source interface and one or more IPv4 addresses on the MX Series router that receive
RADIUS requests from which the RADIUS requests are sent to the RADIUS server. | [
{
"name": "interface",
"desc": "Source interface that sends the RADIUS requests."
},
{
"name": "address",
"desc": "Source IPv4 address that sends the RADIUS requests. You can specify multiple source IPv4 addresses."
}
] | access—To view this statement in the configuration.
access-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 17.1. | [
"Configuring RADIUS Servers",
"Understanding Network Elements",
"Understanding How a RADIUS Server Controls Policy and Charging Control Rules"
] |
source-interface (RADIUS Snoop Segment) | source-interface source-interface; | [edit access radius snoop-segments segment-name] | Specify the interface of the MX Series router that receives accounting packets from the access network
to be snooped. | [
{
"name": "source-interface",
"desc": "Name of the interface."
}
] | access—To view this statement in the configuration.
access-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 17.1. | [
"Configuring Snooping of RADIUS Accounting Requests for IP-Based Subscribers",
"Snooping RADIUS Accounting Requests for IP-Based Subscribers Overview",
"IP-Based Subscriber Setup Overview"
] |
source-interface | source-interface source-interface; | [edit interfaces name unit name tunnel] | Define the tunnel source interface. IP address from source-interface is used as tunnel source address.
When you configure IP adddress for the tunnel source-interface using a CLI, the IP tunnel derives that IP
address and uses it as tunnel source address.
When you configure the tunnel source-interface to derive IP addr... | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 23.2R1 for SRX Series Firewalls (SRX1500, SRX4100,
SRX4200, SRX5400, SRX5600, SRX5800, and vSRX3.0)
Statement introduced in Junos OS Release 23.4R1 for SRX Series Firewalls (SRX38, SRX300, SRX320,
SRX340, and SRX345) | [
"Tunnel Services Overview"
] |
source-interface-set-at-login | source-interface-set-at-login {
svlan;
} | [edit protocols ppp-service] | Enable PPP to generate the name of an interface set for use during subscriber login. The AAA process
then sends the name by means of the Juniper Networks VSA QoS-Set-Name (26-130) to the RADIUS
server in the Access-Request message. You can use this statement to discriminate between business and
residential subscribers ... | [
{
"name": "svlan",
"desc": "Specifies that PPP constructs the name of an interface from the physical interface name and the outer (SVLAN) VLAN tag."
}
] | routing | Statement introduced in Junos OS Release 19.3R1. | [
"Automatic Creation of Business Subscriber Interface Sets"
] |
source-ip (Flow Monitoring Logs for NAT) | source-ip address; | [edit services jflow-log collector collector-name] | Specify the source IPv4 address of the services PIC interface to be used for generation of flow
monitoring log messages in flow monitoring template format for NAT events. | [
{
"name": "address",
"desc": "Valid IPv4 address."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 15.1. | [
"Understanding NAT Event Logging in Flow Monitoring Format on an MX Series Router or NFX250",
"Configuring Log Generation of NAT Events in Flow Monitoring Record Format on an MX Series",
"Router or NFX250",
"Monitoring NAT Events on MX Series Routers by Logging NAT Operations in Flow Template Formats",
"Exa... |
source-ip (Security Alarms) | source-ip {
duration interval;
size count;
threshold value;
} | [edit security alarms potential-violation policy] | Configure alarms for a number of policy violations by a source network identifier within a specified time
period. | [
{
"name": "duration interval",
"desc": "Indicate the duration of counters."
},
{
"name": "size count",
"desc": "Indicate the number of source IP addresses for which policy violation checks can be done"
},
{
"name": "threshold value",
"desc": "Indicate the maximum number of source IP ... | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.2. | [
"Security Policies Overview"
] |
source-ip | source-ip {
ipv4-address;
inet6 ipv6-address;
} | [edit protocols sflow] | Configure the IP address to be used for the sFlow datagrams. By configuring an IP address, you ensure
that the IP address is not dynamic. You can specify an IPv4 or IPv6 address or both. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 10.2.
IPv6 addresses are supported in Junos OS Release 19.1R1 for MX Series, PTX Series, and QFX Series
devices | [
"Configuring sFlow Technology for Network Monitoring (CLI Procedure)"
] |
source-ip-address (RADIUS Snoop Segment) | source-ip-address source-address; | [edit access radius snoop-segments segment-name] | Specify the source IP address of accounting requests from a GGSN, PGW, or BNG to snoop. If you do
not enter a source IP address, accounting requests from any IP address can be snooped. | [
{
"name": "source-address",
"desc": "Source IPv4 address."
}
] | access—To view this statement in the configuration.
access-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 17.1. | [
"Configuring Snooping of RADIUS Accounting Requests for IP-Based Subscribers",
"Snooping RADIUS Accounting Requests for IP-Based Subscribers Overview",
"IP-Based Subscriber Setup Overview"
] |
source-ip-address-list | source-ip-address-list address-list-name; | [edit forwarding-options access-security router-advertisement-guard policy policy-name discard
(forwarding-options)],
[edit forwarding-options access-security router-advertisement-guard policy policy-name accept (Router
Advertisement Guard Policy) match-list] | Configure a list of IPv6 addresses for an IPv6 Router Advertisement (RA) guard policy to validate the
source IPv6 address of an incoming RA message against the IPv6 addresses in this list. RA guard
protects against rogue RA messages generated either maliciously or unintentionally by unauthorized or
improperly configure... | [
{
"name": "address-list-name",
"desc": "Configure a list of IPv6 addresses to use in an RA guard policy. The policy is used to validate the source of an incoming RA message by comparing the IPv6 address of the RA message to the IPv6 addresses contained in the list."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 15.1X53-D55. | [
"Understanding IPv6 Router Advertisement Guard",
"Configuring Stateful IPv6 Router Advertisement Guard"
] |
source-ip-based | source-ip-based number; | [edit security screen ids-option screen-name limit-session] | Limit the number of concurrent sessions the device can initiate from a single source IP address. | [
{
"name": "number",
"desc": "Maximum number of concurrent sessions that can be initiated from a source IP address."
}
] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement modified in Junos OS Release 9.2. | [
"Attack Detection and Prevention Overview",
"Example: Configuring Multiple Screening Options"
] |
source-ip-change (Forwarding Options) | source-ip-change; | [edit forwarding-options dhcp-relay] | For Dynamic Host Configuration Protocol (DHCP) client request forwarding, enable source IP change for
the device to use address of egress interface as source IP address. | [] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement changed from vpn to source-ip-change in Junos OS Release 15.1X49-D130 and later releases. | [
"DHCP Overview"
] |
source-ipv4-address (RFC 2544 Benchmarking) | source-ipv4-address address; | [edit services monitoring rfc2544 tests test-name test-name] | Specify the source IPv4 address to be used in generated test frames. This parameter is optional for both
ccc and inet families. If you do not configure the source IPv4 address for an inet family, the source
address of the interface is used to transmit the test frames. | [
{
"name": "address",
"desc": "Valid IPv4 address. Default: If you do not configure the source IPv4 address for a ccc family, default value of 192.168.1.10 is used."
}
] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.3X52.
Statement introduced in Junos OS Evolved Release 21.1R1. | [
"Configuring an RFC 2544-Based Benchmarking Test",
"Understanding RFC 2544-Based Benchmarking Tests on MX Series Routers"
] |
source-lookup | source-lookup | [edit interfaces interface name unit logical unit number family routing protocol family] | On PTX platforms, enable the interface to perform a source lookup in the forwarding table using the
packet's IP source address. source-lookup is used for source-based-forwrding.
NOTE: The source-lookup configuration statement cannot be used alongside source-class-
usage configuration statement (set interfaces interface... | [] | routing
routing-control
interface
interface-control | Statement introduced in Junos OS Evolved Release 24.4R1 | [] |
source-mac-address | source-mac-address mac-address; | [edit services monitoring rfc2544 tests test-name test-name] | Specify the source MAC address used in generated test frames. This parameter is mandatory for a bridge,
ethernet-switching, or vpls family and is optional for a ccc family. | [
{
"name": "mac-address",
"desc": "Source MAC address. Specify the MAC address as six hexadecimal bytes in one of the following formats: nnnn.nnnn.nnnn or nn:nn:nn:nn:nn:nn; for example, 0000:5e00:5355 or 00:00:5e:00:53:55. Default: 0x00:0x60:0x67:0x71:0xC6:0x62"
}
] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.3X53.
Statement introduced in Junos OS Evolved Release 22.4R1. | [
"RFC 2544-Based Benchmarking Tests Overview",
"Understanding RFC 2544-Based Benchmarking Tests on MX Series Routers",
"Configuring an RFC 2544-Based Benchmarking Test"
] |
source-mac-address-list | source-mac-address-list address-list-name; | [edit forwarding-options access-security router-advertisement-guard policy policy-name discard
(forwarding-options)],
[edit forwarding-options access-security router-advertisement-guard policy policy-name accept (Router
Advertisement Guard Policy) match-list] | Configure a list of MAC addresses for an IPv6 Router Advertisement (RA) guard policy to validate the
source MAC address of an incoming RA message against the MAC addresses in this list. RA guard
protects against rogue RA messages generated either maliciously or unintentionally by unauthorized or
improperly configured r... | [
{
"name": "address-list-name",
"desc": "Configure the RA guard policy to match the MAC source address of an incoming RA message to a MAC address contained in the list."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 15.1X53-D55. | [
"Understanding IPv6 Router Advertisement Guard",
"Configuring Stateful IPv6 Router Advertisement Guard"
] |
source-mode | source-mode (chassis | ptp-clock); | [edit chassis synchronization output interfaces external],
[edit chassis synchronization output interfaces (external-0/0 | external-1/0)],
[edit chassis synchronization interfaces bits]
[edit chassis synchronization interfaces bits] hierarchy added for ACX710 in Junos OS Release 20.2R1. | Configure a clock source for output for the configured BITS interface. | [
{
"name": "chassis",
"desc": "Set the chassis clock for output."
},
{
"name": "line",
"desc": "Set the best line clock source for output."
},
{
"name": "ptp-clock",
"desc": "(ACX710 only) Set the PTP clock for output."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.3.
ptp-clock option introduced in Junos OS Release 20.2R1. | [] |
source-nat | source-nat {
interface {
persistent-nat {
address-mapping;
inactivity-timeout seconds;
max-session-number value;
permit (any-remote-host | target-host | target-host-port);
}
}
off;
pool <pool-name>;
persistent-nat {
a... | [edit security nat source rule-set rule-set-name rule rule-name then] | Specify the action of the source NAT rule. | [
{
"name": "off",
"desc": "Do not perform the source NAT operation."
}
] | security — To view this statement in the configuration.
security-control— To add this statement to the configuration. | Statement modified in Junos OS Release 9.6. Statement modified in Junos OS Release 12.1X45-D10. | [] |
source-packet-routing (Junos Telemetry Interface) | source-packet-routing {
telemetry {
statistics {
per-source per-segment-list
no-transit;
no-ingress;
}
}
source-routing-path {
use-for-shortcut;
}
} | [edit protocols] | Enable BGP and statically configured Segment Routing Traffic Engineering (SR-TE) traffic statistics
sensor support for Junos telemetry interface (JTI).
Export JTI statistics using either remote procedure call (gRPC) services or UDP native sensors to stream
statistics. The following resource paths are supported. For UDP... | [
{
"name": "statistics",
"desc": "Create sensors for both the SR-TE policy nexthop and the binding SID that are installed in the forwarding plane. For the SR-TE policy nexthop, the sensors collect traffic statistics steered by all routes that use the SR-TE policy as a nexthop. For the binding SID, the sensor... | routing | Statement introduced in Junos OS Release 18.3R1.
Option per-source per-segment-list is introduced in Junos OS Release 20,1R1 for MX Series and PTX
Series routers.
Statement supported in Junos OS Release 20.2R1 for MX240. MX480, MX960, MX2010, and MX2020
with MPC-10E or MPC-11E routers.
Statement supported in Junos OS E... | [
"Understanding OpenConfig and gRPC on Junos Telemetry Interface",
"Configure a NETCONF Proxy Telemetry Sensor in Junos"
] |
source-packet-routing (Protocols IS-IS) | source-packet-routing {
adjacency-segment {
hold-time hold-time;
}
disable;
explicit-null;
node-segment {
index-range index range;
ipv4-index index;
ipv6-index index;
}
flex-algorithm name {
col... | [edit logical-systems logical-system-name protocols isis],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
isis],
[edit protocols isis],
[edit routing-instances routing-instance-name protocols isis]
[edit logical-systems logical-system-name protocols isis level level-number]... | Enable source packet routing in networking (SPRING) feature on IS-IS levels or OSPF areas.
Source packet routing for IPv6 is supported only for IS-IS. The adjacency-segment, explicit-null, and srgb
statements are supported only for IS-IS.
The remaining statements are explained separately.
Default
Disabled. | [
{
"name": "adjacency-segment",
"desc": ""
},
{
"name": "<hold-time",
"desc": ""
},
{
"name": "hold-time>",
"desc": "Configure attributes for adjacency segments in source packet routing in networking (SPRING), or configure segment routing (SR) to ensure that the adjacency segment iden... | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 16.2R1.
Support for explicit-null and adjacency-segment statements introduced in Junos OS Release 17.2R1 for MX
Series routers, PTX Series routers, QFX5100 switches and QFX10000 switches.
The udp-tunneling option is introduced in Junos OS Evolved Release 21.2R1. | [
"Understanding Source Packet Routing in Networking (SPRING)",
"Understanding Adjacency Segments, Anycast Segments, and Configurable SRGB in SPRING",
"Configuring Anycast and Prefix segments in SPRING for IS-IS Protocol"
] |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.