command stringlengths 2 75 | syntax stringlengths 0 289k | hierarchy_level stringlengths 0 6.91k | description stringlengths 0 45.2k | options listlengths 0 499 | required_privilege_level stringlengths 0 330k | release_information stringlengths 0 3.14k | related_documentation listlengths 0 22 |
|---|---|---|---|---|---|---|---|
show version (JDM) | show version (all-servers | server | vnf | all-vnfs | detail | brief) | Display the version information about the Juniper Device Manager (JDM). | [
{
"name": "all-servers",
"desc": "Display the version details of the JDM instances on both the servers."
},
{
"name": "server",
"desc": "Display the version details of the JDM instance on one specific server. Range: 0 through 1"
},
{
"name": "vnf",
"desc": "Display the version detai... | View
Sample Output
show version
user@jdm> show version
Hostname: mgb-dvaita-ixr1-jdm
Model: junos_node_slicing
Server slot : 1
JDM package version : 17.4-R1.7
Host Software [Red Hat Enterprise Linux]
JDM container Software [Ubuntu 14.04.1 LTS]
JDM daemon jdmd [Version: 17.4R1.7-secure]
JDM daemon jinventoryd [Version: ... | Command introduced in Junos OS Release 17.4R1. | [
"Generic Guidelines for Using JDM Server Commands"
] | |
show version (Junos OS Evolved) | show version
<node (all | node-name)> | Display the hostname and the version information about the software running on the router or switch.
The output for the show version command for Junos OS Evolved includes a Junos field that indicates the
installation package name. From the prefix of this package name, you can decode which Junos OS
Evolved architecture ... | [
{
"name": "none",
"desc": "Display standard information about the hostname and version of the software running on the router or switch."
},
{
"name": "node (all | node-name)",
"desc": "(Optional) Display version information for the specified node or all nodes."
}
] | view
Sample Output
show version (with Third-party Applications Installed)
user@host-re0> show version
Hostname: host-re0
Model: ptx10008
Junos: 22.4R1.11-EVO
Yocto: 3.0.2
Linux Kernel: 5.2.60-yocto-standard-gae998d995
JUNOS-EVO OS 64-bit [junos-evo-install-ptx-x86-64-22.4R1.11-EVO]
External Software:
JET app acmeMon... | node option introduced in Junos OS Evolved Release 18.3R1. | [] | |
show version (Junos OS) | show version
<brief | detail>
<node node-id | local | primary> | Display the hostname and version information about the software running on the device.
The show version command output includes the Junos field, which displays the Junos OS version, including
any selective upgrade (JSU) packages, running on the device. This field provides a consistent means of
identifying the Junos OS ... | [
{
"name": "none",
"desc": "Display standard information about the hostname and version of the software running on the router or switch."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "all-members",
"desc": "(EX4200 switches an... | view
Sample Output
show version (MX240, MX480, MX960, MX2010, MX2020)
user@mx480-a> show version
Hostname: mx480-a
Model: mx480
Family: junos
Junos: 24.4R1.9
JUNOS OS Kernel 64-bit [20241104.1ed86e6_builder_bsd15_244]
JUNOS modules [20241219.060016_builder_junos_244_r1]
JUNOS OS vmguest [20241104.1ed86e6_builder_bsd15... | Command introduced before Junos OS Release 7.4. | [] | |
show version vnf | show version vnf vnf-name | Display the hostname and version information about the specified guest network function (GNF). | [
{
"name": "vnf-name",
"desc": "Name of the GNF for which you want to view the version details."
}
] | View
Sample Output
Depending on the platform running Junos OS, you might see different installed sub-packages.
show version vnf
user@jdm> show version vnf gnf2
Hostname: gnf2
Model: mx960
Junos: 17.4X48-D10.3
JUNOS OS Kernel 64-bit [20170913.201739_fbsd-builder_stable_11]
JUNOS OS libs [20170913.201739_fbsd-builder_s... | Command introduced in Junos OS Release 17.4R1. | [
"Generic Guidelines for Using JDM Server Commands"
] | |
show virtual-chassis active-topology (MX Series Virtual Chassis) | show virtual-chassis active-topology
<(all-members | local | member member-id)> | Display information about neighbor reachability from each member router in an MX Series Virtual
Chassis configuration. You can issue the show virtual-chassis active-topology command from the console of
either member router in the Virtual Chassis. | [
{
"name": "all-members",
"desc": "(Optional) Display neighbor reachability information for both member routers in a Virtual Chassis configuration. This is the default behavior if no options are specified."
},
{
"name": "local",
"desc": "(Optional) Display neighbor reachability information for th... | view
Output Fields
Table 1839 on page 28631 lists the output fields for the show virtual-chassis active-topology command.
Output fields are listed in the approximate order in which they appear.
Table 1839: show virtual-chassis active-topology Output Fields
Field Name
Field Description
membern
Member ID of the Virtual C... | Command introduced in Junos OS Release 11.2. | [
"Verifying Neighbor Reachability for Member Routers or Switches in a Virtual Chassis"
] | |
show virtual-chassis active-topology | show virtual-chassis active-topology
<all-members | local | member member-id> | Display the active topology of the Virtual Chassis or VCF with next-hop reachability information. | [
{
"name": "none",
"desc": "Display the active topology of the member switch where you enter this command."
},
{
"name": "all-members",
"desc": "(Optional) Display the active topology of all members of the Virtual Chassis or VCF."
},
{
"name": "local",
"desc": "(Optional) Display the ... | view
Output Fields
Table 1840 on page 28634 lists the output fields for the show virtual-chassis active-topology command.
Output fields are listed in the approximate order in which they appear.
Table 1840: show virtual-chassis active-topology Output Fields
Field Name
Field Description
Destination ID
Specifies the memb... | Command introduced in Junos OS Release 9.0. | [
"Monitoring the Virtual Chassis Status and Statistics on EX Series Virtual Chassis"
] | |
show virtual-chassis device-topology (MX Series Virtual Chassis) | show virtual-chassis device-topology
<(all-members | local | member member-id)> | Display information about neighbor reachability for each hardware device in an MX Series Virtual
Chassis configuration. On the MX Series router, there is only one active device for each member router.
You can issue the show virtual-chassis device-topology command from the console of either member router
in the Virtual ... | [
{
"name": "all-members",
"desc": "(Optional) Display neighbor reachability information for the device in both member routers in a Virtual Chassis configuration."
},
{
"name": "local",
"desc": "(Optional) Display neighbor reachability information for the device in the member router on which you a... | view
Output Fields
Table 1841 on page 28640 lists the output fields for the show virtual-chassis device-topology command.
Output fields are listed in the approximate order in which they appear.
Table 1841: show virtual-chassis device-topology Output Fields
Field Name
Field Description
membern
Member ID of the Virtual C... | Command introduced in Junos OS Release 11.2. | [
"Verifying Neighbor Reachability for Hardware Devices in a Virtual Chassis"
] | |
show virtual-chassis device-topology | show virtual-chassis device-topology
<all-members | local | member member-id> | Display the device topology—the member and system IDs, the VCP numbers, and device status—for all
hardware devices in the Virtual Chassis or VCF. | [
{
"name": "none",
"desc": "Display the device topology for all members of the Virtual Chassis or VCF."
},
{
"name": "all-members",
"desc": "(Optional) Display the device topology for all members of the Virtual Chassis or VCF."
},
{
"name": "local",
"desc": "(Optional) Display the dev... | clear
Output Fields
Table 1842 on page 28644 lists the output fields for the show virtual-chassis device-topology command.
Output fields are listed in the approximate order in which they appear.
Table 1842: show virtual-chassis device-topology Output Fields
Field Name
Field Description
Member
Assigned member ID.
Device... | Command introduced in Junos OS Release 10.4. | [
"Understanding Virtual Chassis Port Link Aggregation",
"Understanding EX8200 Virtual Chassis Topologies"
] | |
show virtual-chassis fast-failover | show virtual-chassis fast-failover | Display information about the fast failover feature in a Virtual Chassis configuration. | [] | view
Output Fields
Table 1843 on page 28652 lists the output fields for the show virtual-chassis fast-failover command.
Output fields are listed in the approximate order in which they appear.
Table 1843: show virtual-chassis fast-failover Output Fields
Field Name
Field Description
Fast failover on
dedicated VCP ports
I... | Command introduced in Junos OS Release 9.3. | [
"Example: Configuring Fast Failover on Uplink Module VCPs to Reroute Traffic When an EX4200",
"Virtual Chassis Switch or Intermember Link Fails",
"Configuring Fast Failover in an EX Series Virtual Chassis",
"Disabling Fast Failover in an EX Series Virtual Chassis"
] | |
show virtual-chassis heartbeat (MX Series Virtual Chassis) | show virtual-chassis heartbeat
<(brief | detail)>
<(all-members | local | member member-id)> | Display the state of one or both member routers in an MX Series Virtual Chassis configuration when an
IP-based heartbeat packet connection is configured. You can issue the show virtual-chassis heartbeat
command from the console of either member router in the Virtual Chassis. | [
{
"name": "none",
"desc": "Display the heartbeat state of both member routers in an MX Series Virtual Chassis."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output. Using the brief option is equivalent to issuing the command with no options (the default). The... | view
Output Fields
Table 1844 on page 28654 lists the output fields for the show virtual-chassis heartbeat command. Output
fields are listed in the approximate order in which they appear.
Table 1844: show virtual-chassis heartbeat Output Fields
Field Name
Field Description
Level of Output
membern
Member ID of the Virtu... | Command introduced in Junos OS Release 14.1. | [
"Verifying and Managing the Virtual Chassis Heartbeat Connection",
"Example: Determining Member Health Using an MX Series Virtual Chassis Heartbeat Connection",
"with Member Routers in the Same Subnet",
"Example: Determining Member Health Using an MX Series Virtual Chassis Heartbeat Connection",
"with Membe... | |
show virtual-chassis login | show virtual-chassis login | Supply the address of the host that logged into the Virtual Chassis or VCF, or identify the location of the
member switch that redirected the current session to a different member switch.
You might need this information for tracing or troubleshooting purposes. | [] | view
Sample Output
show virtual-chassis login (Direct Login to the Primary Console Port)
user@switch> show virtual-chassis login
Current login session initiated from host 192.0.2.3
show virtual-chassis login (Backup Console Session Redirected to the Primary Console Port)
user@switch> show virtual-chassis login
Current ... | Command introduced in Junos OS Release 9.3. | [
"Understanding Global Management of a Virtual Chassis"
] | |
show virtual-chassis mode | show virtual-chassis mode
<all-members | local | member member-id> | Display the Virtual Chassis or Virtual Chassis Fabric (VCF) mixed mode status. | [
{
"name": "none",
"desc": "Display the Virtual Chassis or VCF mixed mode status for the device where you enter the command."
},
{
"name": "all-members",
"desc": "(Optional) Display the Virtual Chassis or VCF mixed mode status for all member devices in the Virtual Chassis or VCF."
},
{
"n... | view
Output Fields
Table 1845 on page 28661 lists the output fields for the show virtual-chassis mode command.
Table 1845: show virtual-chassis mode Output Fields
Field Name
Field Description
Mixed Mode
Specifies the mixed mode status of the member switch. Mixed mode is either Enabled or Disabled.
Current mode
Shows t... | Command introduced in Junos OS Release 11.1.
Current mode and Future mode after reboot fields introduced in Junos OS Release 13.2X51-D20. | [
"Verifying the Virtual Chassis Fabric Mode Settings",
"Configuring a Mixed Virtual Chassis with EX4200, EX4500, and EX4550 Member Switches (CLI",
"Procedure)"
] | |
show virtual-chassis protocol adjacency (MX Series Virtual Chassis) | show virtual-chassis protocol adjacency
<(brief | detail | extensive)>
<(all-members | local | member member-id)>
<system-id> | Display the entries (neighbors) in the Virtual Chassis Control Protocol (VCCP) adjacency database for an
MX Series Virtual Chassis configuration. You can issue the show virtual-chassis protocol adjacency
command from the console of either member router in the Virtual Chassis. | [
{
"name": "brief | detail |",
"desc": ""
},
{
"name": "extensive",
"desc": "(Optional) Display the specified level of output. Using the brief option is equivalent to issuing the command with no options (the default). The detail option provides more output than the brief option. The extensive opt... | view
Output Fields
Table 1846 on page 28665 lists the output fields for the show virtual-chassis protocol adjacency command.
Output fields are listed in the approximate order in which they appear.
Table 1846: show virtual-chassis protocol adjacency Output Fields
Field Name
Field Description
Level of Output
membern
Memb... | Command introduced in Junos OS Release 11.2. | [
"Viewing Information in the Virtual Chassis Control Protocol Adjacency Database"
] | |
show virtual-chassis protocol adjacency | show virtual-chassis protocol adjacency
<brief | detail | extensive>
<all-members | local | member member-id>
<system-id> | Display the Virtual Chassis Control Protocol (VCCP) adjacency statistics in the Virtual Chassis or VCF for
all hardware devices. | [
{
"name": "none",
"desc": "Display VCCP adjacency statistics in brief form for all members of the Virtual Chassis or VCF."
},
{
"name": "brief | detail |",
"desc": ""
},
{
"name": "extensive",
"desc": "(Optional) Display the specified level of output. Using the brief option is equiva... | clear
Output Fields
Table 1847 on page 28671 lists the output fields for the show virtual-chassis protocol adjacency command.
Output fields are listed in the approximate order in which they appear.
Table 1847: show virtual-chassis protocol adjacency Output Fields
Field Name
Field Description
Level of Output
Interface
N... | Command introduced in Junos OS Release 10.4. | [
"Understanding Virtual Chassis Port Link Aggregation",
"Understanding the Virtual Chassis Control Protocol in an EX8200 Virtual Chassis"
] | |
show virtual-chassis protocol database (MX Series Virtual Chassis) | show virtual-chassis protocol database
<(brief | detail | extensive)>
<(all-members | local | member member-id)>
<system-id> | Display the entries in the Virtual Chassis Control Protocol (VCCP) link-state database for an MX Series
Virtual Chassis configuration. The VCCP link-state database contains information about protocol data
unit (PDU) packets. You can issue the show virtual-chassis protocol database command from the console of
either me... | [
{
"name": "brief | detail |",
"desc": ""
},
{
"name": "extensive",
"desc": "(Optional) Display the specified level of output. Using the brief option is equivalent to issuing the command with no options (the default). The detail option provides more output than the brief option. The extensive opt... | view
Output Fields
Table 1848 on page 28676 lists the output fields for the show virtual-chassis protocol database command.
Output fields are listed in the approximate order in which they appear.
Table 1848: show virtual-chassis protocol database Output Fields
Field Name
Field Description
Level of Output
membern
Member... | Command introduced in Junos OS Release 11.2. | [
"Viewing Information in the Virtual Chassis Control Protocol Link-State Database"
] | |
show virtual-chassis protocol database | show virtual-chassis protocol database
<brief | detail | extensive>
<all-members | local | member member-id> | Display the Virtual Chassis Control Protocol (VCCP) database statistics for all hardware devices within
the Virtual Chassis or VCF. | [
{
"name": "none",
"desc": "Display VCCP database statistics in brief form for all members of the Virtual Chassis or VCF."
},
{
"name": "brief | detail |",
"desc": ""
},
{
"name": "extensive",
"desc": "(Optional) Display the specified level of output. Using the brief option is equival... | clear
Output Fields
Table 1849 on page 28685 lists the output fields for the show virtual-chassis protocol database command.
Output fields are listed in the approximate order in which they appear.
Table 1849: show virtual-chassis protocol database Output Fields
Field Name
Field Description
Level of Output
LSP ID
Link-s... | Command introduced in Junos OS Release 10.4. | [
"Understanding the Virtual Chassis Control Protocol in an EX8200 Virtual Chassis",
"Understanding Virtual Chassis Components"
] | |
show virtual-chassis protocol interface (MX Series Virtual Chassis) | show virtual-chassis protocol interface
<(brief | detail)>
<interface-name>
<(all-members | local | member member-id)> | Display Virtual Chassis Control Protocol (VCCP) information about Virtual Chassis port interfaces in an
MX Series Virtual Chassis. You can issue the show virtual-chassis protocol interface command from the
console of either member router in the Virtual Chassis. | [
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output. Using the brief option is equivalent to issuing the command with no options (the default). The detail option provides more output than the brief option."
},
{
"name": "all-members",
"desc": "(Optional) Display... | view
Output Fields
Table 1850 on page 28690 lists the output fields for the show virtual-chassis protocol interface command.
Output fields are listed in the approximate order in which they appear.
Table 1850: show virtual-chassis protocol interface Output Fields
Field Name
Field Description
Level of Output
membern
Memb... | Command introduced in Junos OS Release 11.2. | [
"Viewing Information About Virtual Chassis Port Interfaces in the Virtual Chassis Control Protocol",
"Database"
] | |
show virtual-chassis protocol interface | show virtual-chassis protocol interface
<brief | detail>
<all-members | local | member member-id>
<interface-name> | Display information about Virtual Chassis Control Protocol (VCCP) statistics for VCCP-enabled
interfaces within the Virtual Chassis or VCF. | [
{
"name": "none",
"desc": "Display the VCCP interface statistics in brief form for all members of the Virtual Chassis or VCF."
},
{
"name": "brief | detail",
"desc": "(Optional) Display the specified level of output. Using the brief option is equivalent to entering the command with no options (t... | clear
Output Fields
Table 1851 on page 28695 lists the output fields for the show virtual-chassis protocol interface command.
Output fields are listed in the approximate order in which they appear.
Table 1851: show virtual-chassis protocol interface Output Fields
Field Name
Field Description
Level of Output
Interface
N... | Command introduced in Junos OS Release 10.4. | [
"Understanding EX Series Virtual Chassis",
"Understanding QFX Series Virtual Chassis",
"Understanding Virtual Chassis Ports in an EX8200 Virtual Chassis",
"Understanding the Virtual Chassis Control Protocol in an EX8200 Virtual Chassis"
] | |
show virtual-chassis protocol route (MX Series Virtual Chassis) | show virtual-chassis protocol route
<destination-id>
<(all-members | local | member member-id)> | Display the Virtual Chassis Control Protocol (VCCP) unicast and multicast routing tables for an MX
Series Virtual Chassis. You can issue the show virtual-chassis protocol route command from the console of
either member router in the Virtual Chassis. | [
{
"name": "all-members",
"desc": "(Optional) Display the VCCP unicast and multicast routing tables for both member routers in a Virtual Chassis configuration. This is the default behavior if no options are specified."
},
{
"name": "destination-id",
"desc": "(Optional) Display the VCCP unicast an... | view
Output Fields
Table 1852 on page 28699 lists the output fields for the show virtual-chassis protocol route command.
Output fields are listed in the approximate order in which they appear.
Table 1852: show virtual-chassis protocol route Output Fields
Field Name
Field Description
membern
Member ID of the Virtual Ch... | Command introduced in Junos OS Release 11.2. | [
"Viewing Virtual Chassis Control Protocol Routing Tables"
] | |
show virtual-chassis protocol route | show virtual-chassis protocol route
<all-members | local | member member-id>
<destination-id> | Display the unicast and multicast Virtual Chassis Control Protocol (VCCP) routing tables within the
Virtual Chassis or VCF. | [
{
"name": "none",
"desc": "Display the unicast and multicast routing tables for all members of the Virtual Chassis."
},
{
"name": "all-members",
"desc": "(Optional) Display the unicast and multicast routing tables for all members of the Virtual Chassis or VCF."
},
{
"name": "destination-... | clear
Output Fields
Table 1853 on page 28702 lists the output fields for the show virtual-chassis protocol route command.
Output fields are listed in the approximate order in which they appear.
Table 1853: show virtual-chassis protocol route Output Fields
Field Name
Field Description
Dev
MAC address of the member stori... | Command introduced in Junos OS Release 10.4. | [
"Understanding EX Series Virtual Chassis",
"Understanding QFX Series Virtual Chassis",
"Understanding the Virtual Chassis Control Protocol in an EX8200 Virtual Chassis"
] | |
show virtual-chassis protocol statistics (MX Series Virtual Chassis) | show virtual-chassis protocol statistics
<interface-name>
<(all-members | local | member member-id)> | Display Virtual Chassis Control Protocol (VCCP) statistics for one or both member routers, or for a
specified Virtual Chassis port interface, in an MX Series Virtual Chassis. You can issue the show virtual-
chassis protocol statistics command from the console of either member router in the Virtual Chassis. | [
{
"name": "all-members",
"desc": "(Optional) Display VCCP statistics for both member routers in a Virtual Chassis configuration. This is the default behavior if no options are specified."
},
{
"name": "interface-name",
"desc": "(Optional) Display VCCP statistics for the specified Virtual Chassis... | view
Output Fields
Table 1854 on page 28707 lists the output fields for the show virtual-chassis protocol statistics command.
Output fields are listed in the approximate order in which they appear.
Table 1854: show virtual-chassis protocol statistics Output Fields
Field Name
Field Description
membern
Member ID of the ... | Command introduced in Junos OS Release 11.2. | [
"Viewing Virtual Chassis Control Protocol Statistics for Member Devices and Virtual Chassis Ports"
] | |
show virtual-chassis protocol statistics | show virtual-chassis protocol statistics
<all-members | local | member member-id>
<interface-name> | Display the Virtual Chassis Control Protocol (VCCP) statistics for all hardware devices within the Virtual
Chassis or VCF. | [
{
"name": "none",
"desc": "Display VCCP statistics for all members of the Virtual Chassis or VCF."
},
{
"name": "all-members",
"desc": "(Optional) Display VCCP statistics for all members of the Virtual Chassis or VCF."
},
{
"name": "interface-name",
"desc": "(Optional) Display VCCP s... | clear
Output Fields
Table 1855 on page 28711 lists the output fields for the show virtual-chassis protocol interface command.
Output fields are listed in the approximate order in which they appear.
Table 1855: show virtual-chassis protocol statistics Output Fields
Field Name
Field Description
PDU type
Protocol data uni... | Command introduced in Junos OS Release 10.4. | [
"Understanding EX Series Virtual Chassis",
"Understanding QFX Series Virtual Chassis",
"Understanding the Virtual Chassis Control Protocol in an EX8200 Virtual Chassis"
] | |
show virtual-chassis status (MX Series Virtual Chassis) | show virtual-chassis status | Display information about the status of both member routers in an MX Series Virtual Chassis
configuration. You can issue the show virtual-chassis status command from the console of either member
router in the Virtual Chassis. | [] | view
Output Fields
Table 1856 on page 28715 lists the output fields for the show virtual-chassis status command. Output
fields are listed in the approximate order in which they appear.
Table 1856: show virtual-chassis status Output Fields
Field Name
Field Description
Virtual Chassis ID
Assigned ID that applies to the e... | Command introduced in Junos OS Release 11.2. | [
"Verifying the Status of Virtual Chassis Member Routers or Switches",
"Verifying and Managing the Virtual Chassis Heartbeat Connection",
"Example: Configuring Interchassis Redundancy for MX Series 5G Universal Routing Platforms Using a",
"Virtual Chassis",
"Example: Determining Member Health Using an MX Ser... | |
show virtual-chassis vc-path | show virtual-chassis vc-path source-interface interface-name destination-interface interface-name | Show the forwarding path a packet takes when going from a source interface to a destination interface
in a Virtual Chassis or VCF configuration.
Starting in Junos OS Releases 14.1X53-D40, 15.1R5, and 16.1R3, when used in VCF configurations, this
command displays additional information about next hops, including when th... | [
{
"name": "source-interface",
"desc": ""
},
{
"name": "interface-name",
"desc": "Name of the interface from which the packet originates in the Virtual Chassis or VCF"
},
{
"name": "destination-interface",
"desc": ""
},
{
"name": "interface-name",
"desc": "Name of the inte... | view
Output Fields
Table 1857 on page 28719 lists the output fields for the show virtual-chassis vc-path command. Output
fields are listed in the approximate order in which they appear.
Some output field names and display order differ between the output for a Virtual Chassis and for a
VCF. When this command is used to ... | Command introduced in Junos OS Release 9.6. | [
"Monitoring the Virtual Chassis Status and Statistics on EX Series Virtual Chassis",
"Understanding EX Series Virtual Chassis",
"Understanding QFX Series Virtual Chassis",
"EX8200 Virtual Chassis Overview"
] | |
show virtual-chassis vc-port (MX Series Virtual Chassis) | show virtual-chassis vc-port
<(all-members | local | member member-id)> | Display the operational status of the Virtual Chassis ports for both member routers or for a specified
member router in an MX Series Virtual Chassis configuration. You can issue the show virtual-chassis vc-
port command from the console of either member router in the Virtual Chassis. | [
{
"name": "all-members",
"desc": "(Optional) Display the operational status of the Virtual Chassis ports for both member routers in a Virtual Chassis configuration."
},
{
"name": "local",
"desc": "(Optional) Display the operational status of the Virtual Chassis ports on the member router on whic... | view
Output Fields
Table 1858 on page 28724 lists the output fields for the show virtual-chassis vc-port command. Output
fields are listed in the approximate order in which they appear.
Table 1858: show virtual-chassis vc-port Output Fields
Field Name
Field Description
membern
Member ID of the Virtual Chassis member ro... | Command introduced in Junos OS Release 11.2. | [
"Verifying the Operation of Virtual Chassis Ports",
"Configuring Interchassis Redundancy for MX Series 5G Universal Routing Platforms Using a Virtual",
"Chassis",
"Example: Configuring Interchassis Redundancy for MX Series 5G Universal Routing Platforms Using a",
"Virtual Chassis"
] | |
show virtual-chassis vc-port diagnostics optics | show virtual-chassis vc-port diagnostics optics
<all-members | local | member member-id>
<interface-name> | Display diagnostics data and alarms for Ethernet optical transceivers installed in ports configured as
Virtual Chassis Ports (VCPs) in an EX Series switches. The information provided by this command is
known as digital optical monitoring (DOM) information.
Thresholds that trigger a high alarm, low alarm, high warning, ... | [
{
"name": "none",
"desc": "Display diagnostics information for transceivers installed in VCPs of all members of a Virtual Chassis or VCF."
},
{
"name": "all-members",
"desc": "(Optional) Display diagnostics information for transceivers installed in VCPs of all members of a Virtual Chassis or VCF... | view
Output Fields
Table 1859 on page 28729 lists the output fields for the show virtual-chassis vc-port diagnostics optics
command. Output fields are listed in the approximate order in which they appear.
Table 1859: show virtual-chassis vc-port diagnostics optics Output Fields
Field Name
Field Description
FPC
Display... | Command introduced in Junos OS Release 12.2. | [
"Install a Transceiver",
"Remove a Transceiver",
"Junos OS Ethernet Interfaces Configuration Guide"
] | |
show virtual-chassis vc-port statistics | show virtual-chassis vc-port statistics
<all-members | local | member member-id>
<brief | detail | extensive >
<interface-name> | Display the traffic statistics collected on Virtual Chassis ports (VCPs). | [
{
"name": "none",
"desc": "Display traffic statistics for VCPs of all members of a Virtual Chassis or VCF."
},
{
"name": "brief | detail |",
"desc": ""
},
{
"name": "extensive",
"desc": "(Optional) Display the specified level of output. Using the brief option is equivalent to enterin... | view
Output Fields
Table 1860 on page 28749 lists the output fields for the show virtual-chassis vc-port statistics command.
Output fields are listed in the approximate order in which they appear.
Table 1860: show virtual-chassis vc-port statistics Output Fields
Field Name
Field Description
Level of Output
fpcnumber
(A... | Command introduced in Junos OS Release 9.0.
The options all-members, brief, detail, extensive, and local were added in Junos OS Release 9.3 for EX Series
switches. | [
"Monitoring the Virtual Chassis Status and Statistics on EX Series Virtual Chassis",
"Verifying Virtual Chassis Ports in an EX8200 Virtual Chassis"
] | |
show virtual-chassis vc-port | show virtual-chassis vc-port
<all-members | local | member member-id> | Display the status of the Virtual Chassis ports (VCPs), including dedicated VCPs, default-configured
VCPs, and uplink ports configured as VCPs, if present. | [
{
"name": "none",
"desc": "Display the operational status of all VCPs of the member switch where you enter the command."
},
{
"name": "all-members",
"desc": "(Optional) Display the operational status of all VCPs on all members of the Virtual Chassis or VCF."
},
{
"name": "local",
"de... | view
Output Fields
Table 1861 on page 28759 lists the output fields for the show virtual-chassis vc-port command. Output
fields are listed in the approximate order in which they appear.
Table 1861: show virtual-chassis vc-port Output Fields
Field Name
Field Description
member name
Device or member number in the Virtua... | Command introduced in Junos OS Release 9.0. | [
"Monitoring the Virtual Chassis Status and Statistics on EX Series Virtual Chassis"
] | |
show virtual-chassis | show virtual-chassis <status> | Display information about all members of the Virtual Chassis or VCF. | [
{
"name": "none",
"desc": "Display information about all Virtual Chassis or VCF member devices."
},
{
"name": "status",
"desc": "Same output as for show virtual-chassis without any options."
}
] | view
Output Fields
Table 1862 on page 28765 lists the output fields for the show virtual-chassis command. Output fields are
listed in the approximate order in which they appear.
Table 1862: show virtual-chassis Output Fields
Field Name
Field Description
Fabric ID
(VCF only) Assigned ID used to identify the VCF.
Fabric ... | Command introduced in Junos OS Release 9.2.
Fabric ID, Fabric Mode, and Route Mode output fields introduced in Junos OS Release 13.2X51-D20.
Alias-Name output field introduced in Junos OS Release 14.1X53-D10. | [
"Understanding Mixed EX Series and QFX Series Virtual Chassis",
"Understanding Mixed Virtual Chassis Fabric",
"Monitoring the Virtual Chassis Status and Statistics on EX Series Virtual Chassis"
] | |
show virtual-network-functions (Junos Node Slicing) | show virtual-network-functions (all-servers | server| slot)
<vnf-name>
<vnf-name detail>
<vnf-name vnf-xml-profile> | Display the list of guest network functions (GNFs) along with their IDs, status and availability. | [
{
"name": "all-servers",
"desc": "Display the details of the GNFs on both the servers."
},
{
"name": "server",
"desc": "Display the details of the GNFs on one specific server. Applicable value is 0 or 1."
},
{
"name": "vnf-name",
"desc": "Display additional details of a particular GN... | View
Output Fields
Table 1863 on page 28774 lists the output fields for the show virtual-network-functions command.
Table 1863: show virtual network functions Output Fields
Field Name
Field Description
ID
The ID associated with the VNF.
Table 1863: show virtual network functions Output Fields (Continued)
Field Name
Fi... | Command introduced in Junos OS Release 17.2R1. | [
"Generic Guidelines for Using JDM Server Commands"
] | |
show virtual-network-functions | show virtual-network-functions
show virtual-network-functions vnf-name
show virtual-network-functions ipsec-nm
show virtual-network-functions vjunos0 | Display Virtual Network Function (VNF) information. | [
{
"name": "vnf-name",
"desc": "(Optional) Display information for a specific VNF."
},
{
"name": "ipsec-nm",
"desc": "(Optional) Display information of the system VNF IPsec."
},
{
"name": "vjunos0",
"desc": "(Optional) Display information of the system VNF vjunos0."
},
{
"name... | view
Output Fields
Table 1864 on page 28784 describes the output fields for the show virtual-network-functions command.
Output fields are listed in the approximate order in which they appear.
Table 1864: show virtual-network functions Output Fields
Field Name
Field Description
ID
ID of the VNF
Name
Name of the VNF
Stat... | Command introduced in Junos OS Release 15.1X53-D45. | [
"Understanding Virtual Network Functions",
"Managing the VNF Life Cycle"
] | |
show vlans (JDM) | show vlans vlan-name | Display the details about the VLANs. | [
{
"name": "vlan-name",
"desc": "Display information for a specific VLAN."
},
{
"name": "brief | detail | extensive | terse",
"desc": "(Optional) Display the specified level of output."
}
] | view
Output Fields
Table 1865 on page 28789 describes the output fields for the show virtual-network-functions command.
Output fields are listed in the approximate order in which they appear.
Table 1865: show virtual-network functions Output Fields
Field Name
Field Description
vlan-name
Display information for a specif... | Command introduced in Junos OS Release 15.1X53-D40. | [] | |
show vlans evpn nd-table | show vlans evpn nd-table
<brief | detail | extensive>
<count>
<instance-name>
<mac-address>
<vlan-name> | Display information about INET entries associated with MAC addresses learned through Network
Discovery Protocol (NDP). | [
{
"name": "none",
"desc": "Display information for all INET entries."
},
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "count",
"desc": "(Optional) Display the number of INET addresses learned in a routing instance."
... | view
Output Fields
Table 1866 on page 28792 lists the output fields for the show vlans evpn nd-table command. Output fields
are listed in the approximate order in which they appear.
Table 1866: show vlans evpn nd-table Output Fields
Field Name
Field Description
Level of Output
INET address
The INET address related to t... | Command introduced in Junos OS Release 17.3R1.
NOTE: Starting with Junos OS Release 17.4R2, the show vlans evpn nd-table command is
replaced by the show ethernet-switching evpn nd-table command. | [] | |
show vlans vlan-groups | show vlans vlan-groups <vlan-group-name> | Display the results of the vlan-groups configuration on the switch. | [
{
"name": "vlan-group-name",
"desc": "(Optional) Information about a specified VLAN group name."
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Output Fields
Table 1 on page 28796 lists the output fields for the show vlans vlan-groups command.
Table 1867: show vlans vlan-groups Output Fields
Field Name
Field Description
vlan-group-name
(Optional) I... | Statement introduced in Junos OS Release 23.4R1. | [
"802.1X Authentication"
] | |
show vlans | The show vlans syntax is as follows:
show vlans
<brief | detail | extensive> | Display information about VLANs configured on bridged Ethernet interfaces. For interfaces configured
to support a VoIP VLAN and a data VLAN, the show vlans command displays both tagged and untagged
membership for those VLANs.
NOTE: When a series of VLANs is created using the vlan-range statement, such VLAN
names are pr... | [
{
"name": "<vlan-name>",
"desc": "Displays the VLAN name."
},
{
"name": "brief",
"desc": "Displays a concise summary of configured VLANs on a network device."
},
{
"name": "detail",
"desc": "Displays detailed information about configured VLANs on a network device."
},
{
"name... | view
Output Fields
Table 1868 on page 28798 lists the output fields for the show vlans command. Output fields are listed in
the approximate order in which they appear. The show vlans output fields are as follows:
Table 1868: show vlans Output Fields
Field Name
Field Description
Level of Output
Routing instance
Name of ... | Command introduced in Junos OS Release 8.4.
Option dot1q-tunneling added in Junos OS Release 12.1 for the QFX Series.
Option interface introduced in Junos OS Release 13.2X50-D10 (ELS). | [
"Example: Setting Up Basic Bridging and a VLAN on Switches",
"Example: Setting Up Bridging with Multiple VLANs",
"Example: Setting Up Basic Bridging and a VLAN for an EX Series Switch",
"Example: Setting Up Bridging with Multiple VLANs for EX Series Switches",
"Example: Configuring a Private VLAN on a Singl... | |
show vmhost bridge | Display bridge table information. The bridge table provides information about the interfaces used for
communication between host and guest operating systems. | [
{
"name": "invoke-on",
"desc": "(Optional) Display the bridge table information of Routing Engines on a device that has dual or redundant Routing Engines. You can use the all-routing-engine option to display the bridge table information of all the Routing Engines or the other-routing-engine option to displa... | view
Sample Output
show vmhost bridge
user@host> show vmhost bridge
Compute cluster: rainier-re-cc
Compute node: rainier-re-cn
Bridge Table
============
bridge name bridge id STP enabled interfaces
jnpr-int-br 8000.bee5a8cfdb9a no tap1
virbr0 ... | Command introduced in Junos OS Release 15.1F3.
NOTE: PTX3000 router supports the Routing and Control Board, RCBPTX. | [] | ||
show vmhost connections | show vmhost connections | Display the details for the cross-connect connections. The NFX150 and NFX250 (NG) supports VLAN
PUSH, POP, and SWAP operations. | [
{
"name": "name",
"desc": "Display the details of a specific connection."
},
{
"name": "down",
"desc": "Display the details of connections that are not operational."
},
{
"name": "up",
"desc": "Display the details of connections that are operational."
},
{
"name": "up-down",
... | view
Output Fields
Table 1869 on page 28822 lists the output fields for the show vmhost connections command. Output fields
are listed in the approximate order in which they appear.
Table 1869: show vmhost connections Output Fields
Field Name
Field Description
Connection
Displays the type of the cross-connect.
Function
... | Command introduced in Junos OS Release 18.1R1. | [] | |
show vmhost control-plane | show vmhost control-plane | Display the status of the JCP, JDM, Layer 2 dataplane, Layer 3 dataplane, and LTE. | [] | view
Sample Output
NOTE: Starting in Junos OS Release 22.1R1, the output of the show vmhost control-plane
command is enhanced to display the following information:
•
Any system component that is currently offline. If you disabled a system component
in the currently active custom mode configuration, then the status of t... | Command introduced in Junos OS Release 18.1R1. | [] | |
show vmhost crash (NFX Series) | show vmhost crash | Display host OS crash information. | [] | view
Sample Output
show vmhost crash
user@host> show vmhost crash
-rw-r--r-- 1 root root 306773 Mar 22 10:41 local-node.srxpfe.7439.1521715280.core.tgz
-rw-r--r-- 1 root root 307058 Mar 22 10:42 local-node.srxpfe.8184.1521715324.core.tgz
-rw-r--r-- 1 root root 306999 Mar 22 10:42 local-node.srxpfe.8918.1521715357.core.... | Command introduced in Junos OS Release 18.1R1. | [] | |
show vmhost crash | show vmhost crash | Display the number of times the host OS crashed. The crash dumps are available at /var/crash. | [] | view
Sample Output
show vmhost crash
user@host> show vmhost crash
Compute cluster: rainier-re-cc
Compute node: rainier-re-cn
Crash Info
==========
total 0
show vmhost crash (NFX Series)
show vmhost crash
user@host> show vmhost crash
-rw-r--r-- 1 root root 306773 Mar 22 10:41 local-n... | Command introduced in Junos OS Release 15.1F3.
NOTE: PTX3000 router supports the Routing and Control Board, RCBPTX. | [] | |
show vmhost forwarding-options analyzer | show vmhost forwarding-options analyzer analyzer-name | Displays information about the VNF analyzers that are configured for port mirroring on a Junos OS
platform. | [
{
"name": "analyzer-name",
"desc": "Displays the details of a specific analyzer on the device."
}
] | view
Output Fields
Table 1870 on page 28829 lists the output fields for the show vmhost forwarding-options analyzer command.
Output fields are listed in the approximate order in which they appear.
Table 1870: show vmhost forwarding-options analyzer Output Fields
Field Name
Field Description
Analyzer name
Displays the n... | Command introduced in Junos OS Release 18.1R1. | [] | |
show vmhost hard-disk-test | show vmhost hard-disk -test { disk disk-name | status} | Display memory and diagnostics monitoring test status on the solid-state drive (SSD). The test output
provides information about the various attributes of the SSD that help to monitor the status of the hard
disk memory. This command should be used only after initiating the disk test with the request vmhost hard-
disk-t... | [
{
"name": "disk disk-name",
"desc": "Display the name of the SSD."
},
{
"name": "status",
"desc": "Display the status of the test."
}
] | maintenance
Sample Output
show vmhost hard-disk-test
user@host> show vmhost hard-disk-test status disk /dev/sda
smartctl 5.42 2014-07-28 r3460 [x86_64-linux-3.10.79-ovp-rt74-WR6.0.0.20_preempt-rt] (local
build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTI... | Command introduced in Junos OS Release 17.2R1. | [] | |
show vmhost hardware | show vmhost hardware
<invoke-on>
<re0 | re1>
<routing engine> | Display details of RAM and solid-state drives (SSDs) installed in the Routing Engine. | [
{
"name": "none",
"desc": "(Optional) Display information about hardware."
},
{
"name": "invoke-on",
"desc": "(Optional) Display the details of RAM and solid-state drives (SSDs) installed on a device that has dual Routing Engines. You can use the all-routing-engine option to display the hardware... | view
Sample Output
show vmhost hardware
user@host> show vmhost hardware
Compute cluster: rainier-re-cc
Compute node: rainier-re-cn
Hardware inventory:
Item Capacity Part number Serial number Description
DIMM 0 16384 MB 36ADS2G72PZ-2G1A1 0x0CF49320 ... | Command introduced in Junos OS Release 15.1F3.
NOTE: PTX3000 router supports the Routing and Control Board, RCBPTX. | [] | |
show vmhost information | show vmhost information
<invoke-on>
<re0 | re1>
<routing engine> | Display information about the host—such as IP address of the host Routing Engine, host OS version,
model number or name of the Routing Engine, and so on. | [
{
"name": "invoke-on",
"desc": "(Optional) Display information about the host on a device that has dual Routing Engines. You can use the all-routing-engine option to display information about the host of all the Routing Engines or the other-routing-engine option to display the information about the host of ... | view
Sample Output
show vmhost information
user@host> show vmhost information
Compute cluster: rainier-re-cc
Compute node Model Kernel release Machine Management IP
rainier-re-cn RAINIER 3.10.79-ovp-rt74-WR6.0.0.20_preempt-rt x86_64 192.168.1.2/24 | Command introduced in Junos OS Release 15.1F3.
NOTE: PTX3000 router supports the Routing and Control Board, RCBPTX. | [] | |
show vmhost jdm status (In-Chassis Model) | show vmhost jdm status | Displays the Juniper Device Manager (JDM) status. This command is applicable to in-chassis Junos node
slicing. | [] | View
Sample Output
show vmhost jdm status
user@router> show vmhost jdm status
JDM Information
---------------------------
Package : jns-jdm-vmhost-19.1-B2.x86_64
Status : Running
PID : 3088
Free Space : 62967 (MiB) | Command introduced in Junos OS Release 19.1R1. | [
"Generic Guidelines for Using JDM Server Commands"
] | |
show vmhost logs | show vmhost logs
<re0 | re1>
<routing engine> | Display trace logs information of the host OS. | [
{
"name": "re0 | re1",
"desc": "(Optional) On devices that support dual or redundant Routing Engines, display trace logs information of the host os running on the Routing Engine in slot 0 (re0) or the Routing Engine in slot 1 (re1)."
},
{
"name": "routing-engine",
"desc": "(Optional) Specify the... | view
Sample Output
show vmhost logs
show vmhost logs | Command introduced in Junos OS Release 15.1F3.
NOTE: PTX3000 router supports the Routing and Control Board, RCBPTX. | [] | |
show vmhost management-if | show vmhost management-if | Display the administrative status, speed and operational mode of the host interface eth0, which serves
as a management interface. | [] | view
Sample Output
show vmhost management-if
user@host> show vmhost management-if
Administrative status: Up
Link status: Up
Link speed: 1000Mb/s
Link operational mode: Full | Command introduced in Junos OS Release 15.1F6.
NOTE: The command is supported on the routers with RE-MX-X6, RE-MX-X8, and RE-
PTX-X8 Routing Engines only. | [] | |
show vmhost memory | show vmhost memory | Display the memory information for the host OS. | [] | view
Output Fields
Sample Output
show vmhost memory
user@host> show vmhost memory
Memory Controller Information
------------------------------
Id :MC0
correctable-error :0
uncorrectable-error :0 | Command introduced in Junos OS Release 18.1R1. | [] | |
show vmhost mode | show vmhost mode
show vmhost mode mode-name | The show vmhost mode command displays the CPU and memory allocations for various components in the
current mode of the device. The show vmhost mode mode-name command displays the CPU and memory
allocations for various components for a specific mode of the device.
NOTE: Starting in Junos OS Release 22.1R1, the output of... | [] | view
Sample Output (NFX150)
show vmhost mode
user@host> show vmhost mode
Mode:
--------
Current Mode: compute
CPU Allocations:
Name Configured Used
-------------------------------------------------------------------------------------------------
-----------... | Command introduced in Junos OS Release 19.1R1. | [] | |
show vmhost netstat | show vmhost netstat
<invoke-on>
<re0 | re1>
<routing engine> | Display network statistics information for the host OS. The statistics contains information related to the
interfaces used for the communication between the host and the guest, such as the IP address of the
destination, IP address of the gateway, mask, flags, and so on. | [
{
"name": "invoke-on",
"desc": "(Optional) Display the network statistics for the host OS on a device that has dual Routing Engines. You can use the all-routing-engine option to display the network statistics information for the host OS running on all the Routing Engines or the other-routing-engine option t... | view
Sample Output
show vmhost netstat
user@host> show vmhost netstat
Compute cluster: rainier-re-cc
Compute node: rainier-re-cn
Netstat
=======
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
0.0.0.0 10.216.63.254 ... | Command introduced in Junos OS Release 15.1F3.
NOTE: PTX3000 router supports the Routing and Control Board, RCBPTX. | [] | |
show vmhost network external-network | show vmhost network external-network | Display current configured and created external interfaces on the hypervisor. | [] | view
Sample Output
show vmhost network external-network
user@host> show vmhost network external-network
Interface : hext-ib.10
Type : in-band
Link State : RUNNING
PF : heth-0-0, VF : 0000:02:10.1
MAC : c8:e7:f0:c9:86:45, VLAN : 10, MTU : 1500
IPv4 : 10.10.10.10/24, Gateway : 10.10.10.254
Rx-packets : 20
... | Command introduced in Junos OS Release 24.2R1 for NFX150, NFX250, and NFX350 devices. | [] | |
show vmhost processes | show vmhost processes
<invoke-on>
<re0 | re1>
<routing engine> | Display information about the host processes that are running on the device. | [
{
"name": "invoke-on",
"desc": "(Optional) Display information about the host processes that are running on a device with dual Routing Engines. You can use the all-routing-engine option to display information about the host processes running on all the Routing Engines or the other-routing-engine option to d... | view
Sample Output
show vmhost processes
user@host> show vmhost processes
Compute cluster: rainier-re-cc
Compute node: rainier-re-cn
UID PID PPID C STIME TTY TIME CMD
root 1 0 0 21:56 ? 00:00:02 init [3]
root 2 0 0 21:56 ? 00:00:00 ... | Command introduced in Junos OS Release 15.1F3.
NOTE: PTX3000 router supports the Routing and Control Board, RCBPTX. | [
"show system processes"
] | |
show vmhost resource-usage | show vmhost resource-usage
<invoke-on>
<re0 | re1>
<routing engine> | Display the current usage of solid-state drive (SSD), RAM, and CPU resources of the host OS. | [
{
"name": "invoke-on",
"desc": "(Optional) Display information about resources used by the host OS running on a device that has dual Routing Engines. You can use the all-routing-engine option to display information about resources used by the host OS on all the Routing Engines or the other-routing-engine op... | view
Sample Output
show vmhost resource-usage
user@host> show vmhost resource-usage
Compute cluster: rainier-re-cc
Compute node: rainier-re-cn
CPU Usage
=========
23:15:09 CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle
23:15:09 all 0.36 0.00 1.16 0.... | Command introduced in Junos OS Release 15.1F3.
NOTE: PTX3000 router supports the Routing and Control Board, RCBPTX. | [] | |
show vmhost snapshot | show vmhost snapshot
<invoke-on>
<re0 | re1>
<routing engine> | Display snapshot details including Linux host kernel version, software version, and other package version
details for both the sets of software in the backup disk. | [
{
"name": "invoke-on",
"desc": "(Optional) Display the host snapshot information of Routing Engines on a device that has dual Routing Engines. You can use the all-routing-engine option to display the host snapshot information of all the Routing Engines or the other-routing-engine option to display the host ... | view
Sample Output
show vmhost snapshot
user@host> show vmhost snapshot
UEFI Version: NGRE_v00.53.00.01
Secondary Disk, Snapshot Time: Tue Dec 8 19:49:09 UTC 2015
Version: set p
VMHost Version: 2.897
VMHost Root: vmhost-x86_64-15.1I20151203_0011_rbu-builder
VMHost Core: vmhost-core-x86_64-15.1I20151203_0011_rbu-bui... | Command introduced in Junos OS Release 15.1F3.
NOTE: PTX3000 router supports the Routing and Control Board, RCBPTX. | [] | |
show vmhost snmp mib walk | show vmhost snmp mib walk mib-name | The show vmhost snmp mib walk mib-name command displays the libvirt SNMP object values that are
associated with the libvirt MIB.
NOTE: To view information for other MIBs, use the show snmp mib walk command. | [] | view
Sample Output
show vmhost snmp mib walk
root@host> show vmhost snmp mib walk LIBVIRT-MIB::libvirtMIB
LIBVIRT-MIB::libvirtGuestName[STRING: 33913919-8dde-4689-b54b-81beb25d84ae] = STRING: "centos1"
LIBVIRT-MIB::libvirtGuestName[STRING: aabbccdd-eeff-42e3-0-564a554e4f53] = STRING: "vjunos0"
LIBVIRT-MIB::libvirtGuest... | Command introduced in Junos OS Release 21.4R1. | [] | |
show vmhost status (In-Chassis Model) | show vmhost status (re0 | re1)
<routing-engine (backup | both | local | master | other)>
<invoke-on (all-routing-engines | other-routing-engine)> | Displays the VM host status. This command is applicable to in-chassis Junos node slicing. When the
router is operating in the in-chassis Junos node slicing mode, the vJunos Resource Status is shown as
Compact. When the router is not operating in the in-chassis Junos node slicing mode, the vJunos Resource
Status is show... | [
{
"name": "re0",
"desc": "Displays Routing Engine 0 (re0) VM host status."
},
{
"name": "re1",
"desc": "Displays Routing Engine 1 (re1) VM host status."
},
{
"name": "routing-engine",
"desc": "Displays the VM host status of a specific routing engine. You have the following sub-option... | View
Sample Output
show vmhost jdm status re0
user@router> show vmhost status re0
bsys-re0:
--------------------------------------------------------------------------
Compute cluster: rainier-re-cc
Compute Node: rainier-re-cn, Online
vJunos Resource Status: Compact | Command introduced in Junos OS Release 19.1R1. | [
"Generic Guidelines for Using JDM Server Commands"
] | |
show vmhost status (NFX Series) | show vmhost status | Display the virtualization status and status of all the CPUs. | [] | view
Sample Output
show vmhost status
user@host> show vmhost status
Virtualization status :
-------------------------------
kvm_status : ok
libvirt_status : ok
qemu_status : ok
CPU Status [Since Boot Time]:
---------------------------------------------------------------------------------------
CPU ... | Command introduced in Junos OS Release 18.1R1. | [] | |
show vmhost status | show vmhost status
<invoke-on>
<re0 | re1>
<routing engine> | Display information about the status of communication between the host OS and the guest OS. The
following status outputs are displayed:
•
Online—Communication between the host OS and the guest OS is good.
•
Offline—Communication with the host is lost. Any state other than Online is considered as Offline. | [
{
"name": "invoke-on",
"desc": "(Optional) Display the status of communication between the host OS and the guest OS running on a router with dual Routing Engines. You can use the all-routing-engine option to display the status of host-to-guest communication on all the Routing Engines or the other-routing-en... | view
Sample Output
show vmhost status
user@host> show vmhost status
Compute cluster: rainier-re-cc
Compute Node: rainier-re-cn, Online | Command introduced in Junos OS Release 15.1F3.
NOTE: PTX3000 router supports the Routing and Control Board, RCBPTX. | [] | |
show vmhost storage | show vmhost storage | Display the vmhost storage information. | [] | view
Sample Output
show vmhost storage (NFX150)
user@host> show vmhost storage
Vmhost Storage Information
------------------------------
Storage Name : sda
SSD Description : Internal disk 1
SSD Model Number : SFSA100GQ1AA4TO-C-LB-216-JUN
SSD Serial Number : 000060124205B1000099
SSD Firmware Ver... | Command introduced in Junos OS Release 18.1R1. | [] | |
show vmhost uptime (NFX Series) | show vmhost uptime | Display the current time and information such as how long the host OS has been running, number of
users, average load, and the last reboot reason. | [] | view
Reboot Reason Codes
Vmhost last reboot reason: 0x20
power cycle
Vmhost last reboot reason: 0x04
reset button
Vmhost last reboot reason: 0x01
cold reset
Vmhost last reboot reason: 0x80
hypervisor reboot
Vmhost last reboot reason: 0x40
watchdog reset
Sample Output
show vmhost uptime
user@host> show vmhost uptime
V... | Command introduced in Junos OS Release 18.1R1. | [] | |
show vmhost uptime | show vmhost uptime
<invoke-on>
<re0 | re1>
<routing engine> | Display the current time and information such as how long the host OS has been running, number of
users, average load, and reason for the last reboot that occurred. | [
{
"name": "invoke-on",
"desc": "(Optional) Display the uptime information about the host on a device with dual Routing Engines. You can use the all-routing-engine option to display the uptime information about the host on all the Routing Engines or the other-routing-engine option to display the uptime infor... | view
Sample Output
show vmhost uptime
show vmhost uptime | Command introduced in Junos OS Release 15.1F3.
NOTE: PTX3000 router supports the Routing and Control Board, RCBPTX. | [] | |
show vmhost version (NFX Series) | show vmhost version detail | Display host version information including Linux host kernel version and host software version. | [] | view
Sample Output
show vmhost version (NFX150)
user@host> show vmhost version detail
Partition set : primary
Software version : 20.3I-20200601_dev_common.0.0613
Host kernel release : 4.1.27-rt30-WR8.0.0.30_ovp
Host kernel version : #1 SMP Fri Jun 1 22:42:16 IST 2019
Par... | Command introduced in Junos OS Release 18.1R1. | [] | |
show vmhost version | show vmhost version
invoke-on;
(re0 | re1);
routing engine {
backup;
both;
local;
master;
other;
} | Display host version information including Linux host kernel version, host software version, and other
package version details for both the sets of software in the primary disk. | [
{
"name": "invoke-on",
"desc": "(Optional) Display the version information of the host running on a device with dual Routing Engines. You can use the all-routing-engine option to display the version information of the host software running on all the Routing Engines or the other-routing-engine option to dis... | view
Sample Output
show vmhost version
user@hostshow vmhost version
Current root details, Device sda, Label: jrootp_P, Partition: sda3
Current boot disk: Primary
Current root set: p
UEFI Version: CICL_P_BUG1_00.23.01
Primary Disk, Upgrade Time: Wed Mar 1 16:35:37 PST 2023
Version: set p
VMHost Version: 7.... | Command introduced in Junos OS Release 15.1F3.
NOTE: PTX3000 router supports the Routing and Control Board, RCBPTX. | [] | |
show vmhost vlans | show vmhost vlans | Display details about the vmhost VLANs. | [
{
"name": "vlan-name",
"desc": "Display information for a specified VLAN."
},
{
"name": "brief | detail | extensive",
"desc": "Display the specified level of output."
},
{
"name": "instance",
"desc": "Display information for a specified instance."
},
{
"name": "interface",
... | view
Output Fields
Table 1871 on page 28892 describes the output fields for the"show vmhost forwarding-options
analyzer" on page 28828"show vmhost vlans" on page 28891 show vmhost vlans command. Output fields
are listed in the approximate order in which they appear.
Table 1871: show vmhost vlans Output Fields
Field Nam... | Command introduced in Junos OS Release 18.1R1. | [] | |
show vpls connections | show vpls connections
<brief | extensive>
<down | up | up-down>
<history>
<instance instance-name local-site local-site-name remote-site remote-site-name>
<instance-history>
<logical-system (all | logical-system-name)>
<status>
<summary> | (T Series and M Series routers, except for the M160 router) Display virtual private LAN service (VPLS)
connection information. | [
{
"name": "none",
"desc": "Display information about all VPLS connections for all routing instances."
},
{
"name": "brief | extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "down | up | up-down",
"desc": "(Optional) Display nonoperational, operatio... | view
Output Fields
Table 1872 on page 28895 lists the output fields for the show vpls connections command. Output fields are
listed in the approximate order in which they appear.
Table 1872: show vpls connections Output Fields
Field Name
Field Description
Instance
Name of the VPLS instance.
Table 1872: show vpls conne... | Command introduced before Junos OS Release 7.4.
instance-history option introduced in Junos OS Release 12.3R2. | [] | |
show vpls flood event-queue | show vpls flood event-queue | Display the pending events in the VPLS flood queue. | [] | view
Output Fields
Table 1873 on page 28911 lists the output fields for the show vpls flood event-queue command. Output
fields are listed in the approximate order in which they appear.
Table 1873: show vpls flood event-queue Output Fields
Field Name
Field Description
Current Pending Event
Provides information on the cu... | Command introduced in Junos OS Release 8.0. | [] | |
show vpls flood instance | show vpls flood instance
<brief | detail | extensive>
<instance-name>
<logical-system logical-system-name> | Display VPLS information related to the flood process. | [
{
"name": "none",
"desc": "Display VPLS information related to the flood process for all routing instances."
},
{
"name": "brief | detail | extensive",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "instance-name",
"desc": "(Optional) Display VPLS informati... | view
Output Fields
Table 1874 on page 28914 lists the output fields for the show vpls flood instance command. Output fields
are listed in the approximate order in which they appear.
Table 1874: show vpls flood instance Output Fields
Field Name
Field Description
Logical system
Name of the logical system.
Name
Name of t... | Command introduced in Junos OS Release 8.0. | [] | |
show vpls flood route | show vpls flood route
(all-ce-flood instance-name instance-name <logical-system-name logical-system-name> |
ce-flood interface interface-name) | Display VPLS route information related to the flood process for either the specified routing instance or
the specified interface. | [
{
"name": "all-ce-flood",
"desc": "Display the flood next-hop route for all customer edge routers for traffic coming from the core of the network."
},
{
"name": "ce-flood interface",
"desc": ""
},
{
"name": "interface-name",
"desc": "Display the flood next-hop route for traffic comin... | view
Output Fields
Table 1875 on page 28917 lists the output for the show vpls flood route command. Output fields are listed
in the approximate order in which they appear.
Table 1875: show vpls flood route Output Fields
Field Name
Field Description
Flood route prefix
Prefix for the flood route.
Flood route type
Type of... | Command introduced in Junos OS Release 8.0. | [] | |
show vpls mac-move-action | show vpls mac-move-action instance
<instance instance-name> | Display the learning interfaces (IFLs) disabled due to a MAC move in a VPLS instance. | [
{
"name": "none",
"desc": "Display all the IFLs disabled due to MAC moves."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display the IFLs disabled due to a MAC move in a VPLS instance."
}
] | view
Output Fields
Table 1876 on page 28920 describes the output fields for the show vpls mac-move-action command.
Output fields are listed in the approximate order in which they appear.
Table 1876: show vpls mac-move-action Output Fields
Field Name
Field Description
Instance
Instance name
Local Interface
Local interfa... | Command introduced in Junos OS Release 14.2. | [] | |
show vpls mac-table | show vpls mac-table
<age>
<brief | detail | extensive | summary>
<bridge-domain bridge-domain-name>
<instance instance-name>
<interface interface-name>
<logical-system (all | logical-system-name)>
<mac-address>
<vlan-id vlan-id-number> | Display learned virtual private LAN service (VPLS) media access control (MAC) address information. | [
{
"name": "none",
"desc": "Display all learned VPLS MAC address information."
},
{
"name": "age",
"desc": "(Optional) Display age of a single mac-address."
},
{
"name": "brief | detail | extensive |",
"desc": ""
},
{
"name": "summary",
"desc": "(Optional) Display the spec... | view
Output Fields
Table 1877 on page 28923 describes the output fields for the show vpls mac-table command. Output fields
are listed in the approximate order in which they appear.
Table 1877: show vpls mac-table Output fields
Field Name
Field Description
Age
Age of a single mac-address.
Routing instance
Name of the ro... | Command introduced in Junos OS Release 8.5. | [] | |
show vpls statistics | show vpls statistics
<instance instance-name>
<logical-system (all | logical-system-name)> | (T Series and M Series routers, except for the M160 router) Display virtual private LAN service (VPLS)
statistics. | [
{
"name": "none",
"desc": "Display VPLS statistics for all routing instances."
},
{
"name": "instance instance-name",
"desc": "(Optional) Display VPLS statistics for a specific VPLS routing instance only."
},
{
"name": "logical-system (all | logical-system-name)",
"desc": "(Optional)... | view
Output Fields
Table 1878 on page 28930 lists the output fields for the show vpls statistics command. Output fields are
listed in the approximate order in which they appear.
Table 1878: show vpls statistics Output Fields
Field Name
Field Description
Instance
Name of the VPLS instance.
Local interface
Name of the lo... | Command introduced before Junos OS Release 7.4. | [] | |
show vrrp track | show vrrp track
<bfd | interfaces | routes | all>
<summary | detail>
<logical-system logical-system-name> | Level
Interface
Name of the logical interface (for example, ge-0/0/1.0) on which the
corresponding VRRP session is configured.
detail or summary
Cfg
Configured priority.
detail or summary
Run
Current (or running) priority cost.
detail or summary
Local-ip
Configured local IP address.
detail or summary
Peer-ip
Configured... | [
{
"name": "none",
"desc": "(Same as summary) Display summarized status information of tracked routes and tracked interfaces."
},
{
"name": "bfd | interfaces |",
"desc": ""
},
{
"name": "routes | all",
"desc": "(Optional) These options display the following information:"
},
{
... | view
Output Fields
Table 1879 on page 28934 lists the output fields for the show vrrp track command. Output fields are
listed in the approximate order in which they appear.
Table 1879: show vrrp track Output Fields
Fields | Command introduced before Junos OS Release 7.4.
all and routes options added in Junos OS Release 17.1.
bfd option added in Junos OS Release 25.2. | [
"Configuring VRRP"
] | |
show vrrp | show vrrp
<brief | detail | extensive | summary>
<interface interface-name <group number>>
<logical-system logical-system-name >
<nsr> | Display status information about Virtual Router Redundancy Protocol (VRRP) groups. | [
{
"name": "none",
"desc": "(Same as brief) Display brief status information about all VRRP interfaces."
},
{
"name": "brief | detail | extensive |",
"desc": ""
},
{
"name": "summary",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "interface interfac... | view
Output Fields
Table 1880 on page 28940 lists the output fields for the show vrrp command. Output fields are listed in
the approximate order in which they appear
Table 1880: show vrrp Output Fields
Field Name
Field Description
Level of Output
Interface
Name of the logical interface.
brief extensive none
summary
Int... | Command introduced before Junos OS Release 7.4.
nsr option added in Junos OS Release 13.2. | [] | |
show vrrp | show vrrp
<brief | detail | extensive | summary>
<interfaceͨinterface-name>
<logical-systemͨlogical-system-name>
<nsr>
<trackͨtrack-interfaces> | Display information and status about VRRP groups. | [
{
"name": "none",
"desc": "(Same as brief) Display brief status information about all VRRP interfaces."
},
{
"name": "brief | detail | extensive |",
"desc": ""
},
{
"name": "summary",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "interface interfac... | view
Output Fields
Table 1881 on page 28958 lists the output fields for the show vrrp command. Output fields are listed in
the approximate order in which they appear.
Table 1881: show vrrp Output Fields
Field Name
Field Description
Level of Output
Interface
Name of the logical interface.
none, brief,
extensive, summar... | Statement introduced in Junos OS Release 18.1R1. | [
"Configuring VRRP for IPv6 (CLI Procedure)",
"Understanding VRRP on SRX Series Devices",
"Example: Configuring VRRP/VRRPv3 on Chassis Cluster Redundant Ethernet Interfaces"
] | |
show wlan access-points | Syntax (SRX Series Firewalls)
show wlan
<detail>
<virtual-access-points>
<client-associations>
<neighbors>
<summary>
<radio>
<ha> | Display information about wireless and virtual access point WLANs configured on the wireless LAN
interface wl-x/0/0. | [
{
"name": "detail",
"desc": "(Optional) Display the specified level of output."
},
{
"name": "virtual access",
"desc": ""
},
{
"name": "points",
"desc": "Display Virtual access Points (VAPs) status and statistics."
},
{
"name": "client-associations",
"desc": "Client assoc... | view
Output Fields
Table 1882 on page 28973 lists the output fields for the show wlan access-points command. Output fields
are listed in the approximate order in which they appear.
Table 1882: show wlan access-points output fields
Field Name
Field Description
Level of Output
Access point
Name of the wireless access poi... | Command introduced in Junos OS Release 19.4R1.
ha option is introduced in the Junos OS Release 20.3R1 for SRX Series Firewalls. | [
"Wi-Fi Mini-Physical Interface Module Overview",
"Configure Wi-Fi Mini-PIM"
] | |
show | show <statement-path> <identifier> | Display the current configuration. | [
{
"name": "none",
"desc": "Display the entire configuration at the current hierarchy level."
},
{
"name": "identifier",
"desc": "(Optional) Display the configuration for the specified identifier."
},
{
"name": "statement-path",
"desc": "(Optional) Display the configuration for the sp... | configure—To enter configuration mode. In addition to configure, to display the contents under a
configuration hierarchy, user should have the required privilege level to view the configuration under
that configuration hierarchy. | Command introduced before Junos OS Release 7.4. | [
"Displaying the Current Configuration"
] | |
show-bgp-diagnostics | show bgp diagnostics warnings | This command shows warnings when BGP is running in abnormal state.
user@host> show bgp diagnostics warnings
High RPD memory usage, current percentage: 90, maximum ever percentage: 92
Effective community match cache lookups: 18345908, hit ratio: 0.58
Effective aspath match cache lookups: 25678302, hit ratio: 0.71
Comm... | [
{
"name": "dropped-route-cache",
"desc": "(Optional) Shows all cached dropped routes for a given peer rib."
},
{
"name": "export-evaluation-triggers",
"desc": "(Optional) Shows events which lead to the current BGP export evaluation."
},
{
"name": "import-evaluation-triggers",
"desc":... | view
Output Fields
Table 1 lists the output fields for the show-bgp-diagnostics command.
Table 1883: show-bgp-diagnostics Output Fields
Field Name
Field Description
Group
Specifies BGP group.
Export eval trigger
Specifies the event which has triggered the BGP group export evaluation.
Export eval trigger
time
Specifies ... | Command show bgp diagnostics is introduced in Junos OS 24.4R1 and Junos OS Evolved Release 24.4R1
Releases. | [] | |
show-firewall-configuration | show firewall configuration filter filter-name information-type configured | compiled
<application <application-name>> | When firewall filters are configured, an optimization operation is performed on the configuration. The
optimization process may merge or eliminate the terms of filters. This can lead to differences between
the configured filters and the filters programmed in the hardware.
•
Use the show firewall configuration firewall ... | [
{
"name": "application application name",
"desc": "The owner application of the firewall filter. The application names are:"
},
{
"name": "cosd",
"desc": "Cosd filters"
},
{
"name": "firewalld",
"desc": "Cli filters"
},
{
"name": "jdhcpd",
"desc": "Jdhcpd filters"
},
... | view
Output Fields
Table 1884: <show firewall configuration filter <filter-name> information-type configured/compiled>
Output Fields
Field Name
Field Description
Filter
Name of the filter
Number Of Terms
The number of terms in the filter
App Name
The owner application of the firewall filter
Family Name
The firewall fil... | Command introduced in Junos OS Release 25.2R1 | [
"interface-specific",
"scale-mode",
"no-incremental-update",
"layer2-policer (firewall)",
"fast-lookup-filter (PTX)"
] | |
show-spring-traffic-statistics | Displays the spring sensor-based traffic statistics. The per-interface-per-member-link <ingress>
<egress> and per-sid <ingress> <egress> filters are used to view the details of Packets, Bytes, Packet-
Rate, and Byte-Rate.
show spring traffic-statistics per-interface-per-member-link ingress
show spring traffic-statistic... | [
{
"name": "per-interface-per-member-link",
"desc": ""
},
{
"name": "ingress",
"desc": ""
},
{
"name": "egress",
"desc": ""
},
{
"name": "per-sid",
"desc": ""
},
{
"name": "ingress",
"desc": ""
},
{
"name": "egress",
"desc": "Additional Information ... | view
Output Fields
Table 1 lists the output fields for the show spring traffic-statistics command.
Table 1885: show spring traffic-statistics Output Fields
Field Name
Field Description
Level of Output
Interface/Sid
Displays interface name and segment id.
-
Type
Displays interface type
Ingress/Egress
PacketsBytes
Displa... | Command introduced in Junos OS Evolved Release 23.2R1. | [
"senor-based-stats"
] | ||
show-system-inventory-hardware-memory | show system inventory hardware memory | Display hardware memory statistics for a disaggregated Junos OS platform. | [] | view
Output Fields
Table 1 lists the output fields for the show system inventory hardware memory command. Output fields are
listed in the approximate order in which they appear.
Table 1886: show system inventory hardware memory Output Fields
Field Name
Field Description
Total
The total amount of available virtual memor... | Command introduced in Junos OS Release 15.1X53-D40 for the NFX250 Network Services Platform.
Command introduced in Junos OS Release 18.1R1 for NFX150 devices. | [] | |
show-system-inventory-hardware-optics | show system inventory hardware optics | Display port information of all hardware optics installed in the router, including the Xcvr vendor details
and serial number. | [] | view
Output Fields
No Link Title lists the output fields for the show system inventory hardware optics command. Output fields
are listed in the approximate order in which they appear.
Table 1887: show system inventory hardware optics Output Fields
Field Name
Field Description
Port
Name of the port
Cable type
Name of t... | Command introduced in Junos OS Release 19.4R1. | [] | |
show-system-inventory-hardware-storage | show system inventory hardware storage | Display hardware storage details such as the list of partitions, disk usage per partition, and disk I/O
statistics for a disaggregated Junos OS platform. | [
{
"name": "show system inventory hardware storage",
"desc": "user@host> show system inventory hardware storage Device Mount Point File System Options ----------------------------------------- ---------------- --------------------------------------------- /dev/sda4 ... | view
Output Fields
Table 1 lists the output fields for the show system inventory hardware storage command. Output fields are
listed in the approximate order in which they appear.
Table 1888: show system inventory hardware storage Output Fields
Field Name
Field Description
Device
The device path.
Mount Point
The mount ... | Command introduced in Junos OS Release 15.1X53-D40 or the NFX250 Network Services Platform. | [] | |
show-ted-ipv4-prefix | show ted ipv4-prefix | Display the entries in the traffic engineering database IPv4 prefix tree. | [
{
"name": "instance",
"desc": ""
},
{
"name": "instance-name",
"desc": "(Optional) Display routing instance information for the specified instance. If instance-name is omitted, information is displayed for the master instance."
},
{
"name": "logical-system (all | logical-system-name)",
... | view
Output Fields
Table 1889 on page 29018 lists the output fields for the show ted ipv4-prefix command.
Table 1889: show ted ipv4-prefix Output Fields
Field Name
Field Description
Prefix
IPv4 Prefix information for the node.
Table 1889: show ted ipv4-prefix Output Fields (Continued)
Field Name
Field Description
Node... | Command introduced in Junos OS Release 22.1R1. | [
"IPv6 Prefixes and IPv6 Adjacency SIDs MPLS Support in Traffic Engineering Database and BGP Link-",
"State"
] | |
show-ted-ipv6-prefix | show ted ipv6-prefix | Display the entries in the traffic engineering database IPv6 prefix tree. | [
{
"name": "instance",
"desc": ""
},
{
"name": "instance-name",
"desc": "(Optional) Display routing instance information for the specified instance. If instance-name is omitted, information is displayed for the master instance."
},
{
"name": "logical-system (all | logical-system-name)",
... | view
Output Fields
Table 1890 on page 29021 lists the output fields for the show ted ipv6-prefix command.
Table 1890: show ted ipv6-prefix Output Fields
Field Name
Field Description
IPv6 Prefix
IPv6 Prefix information for the node.
Node
Hostname and address of the node. If the node contains a router ID, it is displayed... | Command introduced in Junos OS Release 22.1R1. | [
"IPv6 Prefixes and IPv6 Adjacency SIDs MPLS Support in Traffic Engineering Database and BGP Link-",
"State"
] | |
shutdown (BPDU Block) | shutdown; | [edit ethernet-switching-options bpdu-block interface (all | interface-name)] | Shut down all or specified interfaces to prevent spanning-tree protocol BPDUs (for STP, MSTP, RSTP,
and VSTP) from entering the interfaces on which BPDU protection is configured.
Default
Not enabled | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.2. | [
"Understanding BPDU Protection for STP, RSTP, and MSTP",
"Unblocking an Interface on non-ELS EX Series Switches That Receives BPDUs in Error (CLI",
"Procedure)"
] |
shutdown (Protocols BGP) | shutdown {
notify-message notify-message;
} | [edit protocols bgp],
[edit protocols bgp group group-name],
[edit protocols bgp group group-name neighbor address],
[edit logical-systems logical-system-name protocols bgp],
[edit logical-systems logical-system-name protocols bgp group group-name],
[edit logical-systems logical-system-name protocols bgp group group-na... | Extended BGP administrative shutdown communication. This shutdown communication feature allows
configuration, encode, and sending of additional text message along with BGP cease notification to the
peer. This feature is useful during maintenance or unstable window. | [
{
"name": "notify-message",
"desc": "Notification message"
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 19.1. | [] |
shutdown-threshold | shutdown-threshold number; | [edit vlans vlan-name dot1q-tunneling layer2-protocol-tunneling (all | protocol-name)] | Specify the maximum number of Layer 2 PDUs of the specified protocol that can be received per second
on the interfaces in a specified VLAN before the interface is disabled. Once an interface is disabled, you
must explicitly reenable it using the clear ethernet-switching layer2-protocol-tunneling error command.
Otherwis... | [
{
"name": "number",
"desc": "Maximum number of Layer 2 PDUs of the specified protocol that can be received per second"
}
] | system—To view this statement in the configuration.
system-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 10.0. | [
"Example: Configuring Layer 2 Protocol Tunneling on EX Series Switches Without ELS Support",
"Configuring Layer 2 Protocol Tunneling on EX Series Switches Without ELS Support"
] |
sib | sib {
minimum number;
power
} | [edit chassis] | Configure the minimum number of SIBs on an M320 router or manage SIB power on PTX10K series
devices. With this configuration, SIB absent alarms are generated only if the SIB count falls below the
minimum specified. | [
{
"name": "number",
"desc": "Minimum number of SIBs on the router."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 7.4. | [
"Configuring the Junos OS to Support Entry-Level Configuration on an M320 Router with a Minimum",
"Number of SIBs and PIMs"
] |
signal-bandwidth | signal-bandwidth type; | [edit logical-systems logical-system-name protocols mpls label-switched-path lsp-name lsp-
attributes],
[edit protocols mpls label-switched-path lsp-name lsp-attributes] | Specify the bandwidth encoding of the signal used for path computation and admission control. | [
{
"name": "type",
"desc": "Configure the type of bandwidth encoding used on the LSP. It can be any of the following values:"
}
] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced before Junos OS Release 7.4. | [
"Configuring the Signal Bandwidth Type"
] |
signal-degrade | signal-degrade {
ber-threshold-clear value;
ber-threshold-signal-degrade value;
interval value;
} | [edit interfaces interface-name otn-options] | Specify bit error rate (BER) signal degradation thresholds and time interval for raising and clearing alarms
for optical transport network (OTN) links.
Default
If you omit the signal-degrade statement, the default threshold values are used. | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 17.2R1. | [
"10-Gigabit Ethernet OTN Options Configuration Overview",
"100-Gigabit Ethernet OTN Options Configuration Overview",
"Configuring OTN Interfaces on P1-PTX-2-100G-WDM"
] |
signal-degrade-monitor-enable | (signal-degrade-monitor-enable | no-signal-degrade-monitor-enable); | [edit interfaces interface-name otn-options preemptive-fast-reroute] | Enable or disable pre-forward error correction (FEC) bit error rate (BER) monitoring.
With pre-FEC BER monitoring enabled, when the configured pre-FEC BER signal degrade threshold is
reached, the PIC stops forwarding packets to the remote interface and raises an interface alarm. Ingress
packets continue to be processe... | [
{
"name": "signal-degrade-monitor-enable",
"desc": "Enable pre-FEC BER signal degrade monitoring."
},
{
"name": "no-signal-degrade-monitor-enable",
"desc": "Do not enable pre-FEC BER signal degrade monitoring."
}
] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 13.2. | [
"Understanding Pre-FEC BER Monitoring and BER Thresholds",
"100-Gigabit Ethernet OTN Options Configuration Overview",
"Configuring OTN Interfaces on P1-PTX-2-100G-WDM"
] |
signal-type (BITS Interfaces) | signal-type (2048KHZ | e1 | t1) | [edit chassis synchronization interfaces bits] | Configure the input and output signal type to the same value for the building-integrated timing supply
(BITS) interface. | [
{
"name": "2048khz",
"desc": "Configure the BITS interface to output or accept as input the 2.048 MHz square wave."
},
{
"name": "e1",
"desc": "Configure the BITS interface to output or accept as input the E1 framed signal."
},
{
"name": "t1",
"desc": "Configure the BITS interface to... | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.3. | [
"External Clock Synchronization Overview for ACX Series Routers",
"Configuring External Clock Synchronization for ACX Series Routers",
"Synchronous Ethernet Overview"
] |
signal-type | signal-type (1hz | 5mhz | 10mhz | 2048mhz | e1 | t1); | [edit chassis synchronization interfaces external],
[edit chassis synchronization interfaces (external-0/0 | external-1/0)] | Configure the frequency for the provided grandmaster clock. | [
{
"name": "1mhz",
"desc": "Set the signal with a clock frequency of 1 MHz."
},
{
"name": "5mhz",
"desc": "Set the signal with a clock frequency of 5 MHz."
},
{
"name": "10mhz",
"desc": "Set the signal with a clock frequency of 10 MHz."
},
{
"name": "2048khz",
"desc": "Set... | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 12.3. | [] |
signaling | signaling; | [edit logical-systems logical-system-name routing-instances routing-instance-name protocols bgp
family inet-mdt],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols bgp
family inet-mvpn],
[edit logical-systems logical-system-name routing-instances routing-instance-name protoco... | Enable signaling in BGP. For multicast distribution tree (MDT) subaddress family identifier (SAFI) NLRI
signaling, configure signaling under the inet-mdt family. For multiprotocol BGP (MBGP) intra-AS NLRI
signaling, configure signaling under the inet-mvpn family. | [] | routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.4. | [
"Example: Configuring Source-Specific Multicast for Draft-Rosen Multicast VPNs"
] |
signature (Application Identification) | signature l4-l7-signature-name {
chain-order
member member-name {
check-bytes max-bytes-to-check;
context context;
pattern pattern;
direction (any | client-to-server | server-to-client);
}
order order;
order-priority (high | low);
port-range {
tcp [port-... | [edit services application-identification application application-name over protocol-type] | Configure an application signature for pattern matching. | [] | view-level—To view this statement in the configuration.
control-level—To add this statement to the configuration. | Statement introduced in Junos OS Release 17.1.
Support for Next Gen Services introduced in Junos OS Releases 19.3R2 and 19.4R1 on MX Series
MX240, MX480 and MX960 using the MX-SPC3 services card. | [
"Application Identification Overview",
"Configuring Custom Application Signatures"
] |
signature (Security IDP) | signature {
context context-name;
direction (any | client-to-server | server-to-client);
negate;
pattern signature-pattern;
pattern-pcre signature-pattern-pcre;
protocol (Security IDP Signature Attack) {
iicmp (Security IDP Signature Attack) {
checksum-validate {
... | [edit security idp custom-attack attack-name attack-type] | IDP uses stateful signatures to detect attacks. Stateful signatures are more specific than regular
signatures. With stateful signatures, IDP can look for the specific protocol or service used to perpetrate
the attack. | [] | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 9.3. | [] |
Signature Hash Algorithm (Security IKE) | signature-hash-algorithm (sha1 | sha256 | sha384 | sha512); | [edit security ike proposal proposal-name] | Defines the digital signature hash algorithms that must match with the received signature hash
algorithms in the hierarchical order for IKEv2. If your device doesn't find a match, negotiation with the
IKE peer fails. This configuration ensures that the peers negotiate a specific set of signature hash
algorithms. Note t... | [
{
"name": "sha1",
"desc": "Select SHA-1 signature hash algorithm."
},
{
"name": "sha256",
"desc": "Select SHA 256-bit signature hash algorithm."
},
{
"name": "sha384",
"desc": "Select SHA 384-bit signature hash algorithm."
},
{
"name": "sha512",
"desc": "Select SHA 512-bi... | security—To view this statement in the configuration.
security-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 24.4R1. | [
"Signature Authentication in IKEv2"
] |
signature | signature name {
chain-order;
maximum-transactions number;
member name {
context value;
direction (any | client-to-server | server-to-client);
pattern dfa-pattern;
}
order number;
} | [edit services application-identification nested-application name] | Identify the name of the custom nested application signature definition. The name must be unique with
a maximum length of 32 characters. | [
{
"name": "name",
"desc": "Name of the signature definition. The remaining statements are described separately."
}
] | system—To view this statement in the configuration.
system control—To add this statement to the configuration. | Statement introduced in Junos OS Release 10.2. | [
"Application Identification for Nested Applications"
] |
signature | signature name {
member name {
context context;
direction (any | client-to-server | server-to-client);
pattern pattern;
}
port-range [ port-range ... ];
} | [edit services application-identification application application-name over protocol-type] | Application signature for pattern matching. A unique application signature identifier. Must be a unique
name with a maximum length of 63 characters.
You need to define an application signature to match the pattern by defining a unique application
signature identifier, application signature member identifier, connection... | [
{
"name": "member",
"desc": "Member name for a custom application signature. Custom signatures can contain multiple members that define attributes for an application. (The supported member name range is"
},
{
"name": "m01 through m15.)",
"desc": ""
},
{
"name": "port-range",
"desc": ... | system | Statement introduced in Junos OS Release 15.1X49-D40. | [
"Custom Application Signatures for Application Identification"
] |
signature-method-all-ports | signature-method-all-ports | [edit services application-identification] | Run signature matching on all traffic in application-identification. This is called the signature-match
mode.
In the default mode, or fast-port-match mode, all traffic destined to well-known ports (up to 1024)
immediately returns the final port match. However, the device runs signature matching for all traffic
destine... | [] | interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration. | Statement introduced in Junos OS Release 11.2. | [
"Configuring Global APPID Properties"
] |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.