command stringlengths 2 75 | syntax stringlengths 0 289k | hierarchy_level stringlengths 0 6.91k | description stringlengths 0 45.2k | options listlengths 0 499 | required_privilege_level stringlengths 0 330k | release_information stringlengths 0 3.14k | related_documentation listlengths 0 22 |
|---|---|---|---|---|---|---|---|
request chassis fpc | request chassis fpc
< slot slot-number
<tag> | (MX Series, QFabric systems, EX Series switches, and PTX Series Devices only) Control the operation of
the Flexible PIC Concentrator (FPC). An error message is displayed when restart, offline, or online is
configured using request chassis fpc slot command on an FPC with empty slot.
Control the operation of the Flexible... | [
{
"name": "node",
"desc": "Change Flexible PIC Concentrator status of specific node."
},
{
"name": "offline",
"desc": "Take the FPC offline."
},
{
"name": "online",
"desc": "Bring the FPC online."
},
{
"name": "interconnect-device name",
"desc": "(QFabric systems only) Br... | maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request chassis fpc (SRX Series)
user@host> request chassis fpc online slot 0
FPC 0 already online
request chassis fpc
user@host> request chassis fpc online slot 0
Online initiated, use "show c... | Command introduced before Junos OS Release 7.4.
Command support added to MX10004 device in Junos OS Release 22.3R1.
Command introduced on SRX Series Firewalls in Junos OS Release 17.2. | [
"MX960 Flexible PIC Concentrator Description",
"show chassis fpc (View)"
] | |
request chassis fpc-control-port | request chassis fpc-control-port (disable | enable) fpc FPC slot number port Port number | You can disable FPC HA control port 0 on primary node and enable FPC HA control port 0 on secondary
node. | [
{
"name": "disable",
"desc": "Disable HA control port on the local node."
},
{
"name": "enable",
"desc": "Enable HA control port on the local node."
},
{
"name": "fpc",
"desc": "Specify the fpc slot number. Range: 0 through 23"
},
{
"name": "port",
"desc": "Specify the po... | maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request chassis fpc-control-port
user@host> request chassis fpc-control-port disable fpc 0 port 0
fpc 0 HA port 0 disabled
user@host> request chassis fpc-control-port enable fpc 0 port 0
fpc 0 H... | Command introduced in Junos OS Release 21.4R1. | [
"Chassis Cluster Dual Control Links"
] | |
request chassis fpm resync | request chassis fpm resync
<all-members>
<local>
<member member-id> | (M40e, M120, M160, M320, MX Series, and T Series routers only) Resynchronize the craft interface
status. | [
{
"name": "all-members",
"desc": "(MX Series routers only) (Optional) Resynchronize the craft interface status on all members of the Virtual Chassis configuration."
},
{
"name": "lcc number",
"desc": "(TX Matrix router and TX Matrix Plus router only) (Optional) Line-card chassis number. Replace ... | maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request chassis fpm resync
user@host> request chassis fpm resync
Front Panel resynced
request chassis fpm resync (MX2010 Router)
user@host > request chassis fpm resync
Front Panel resynced. | Command introduced before Junos OS Release 7.4.
sfc option introduced for the TX Matrix Plus router in Junos OS Release 9.6. | [
"Resynchronizing FPC Sequence Numbers with Active FPCs when an FPC Comes Online"
] | |
request chassis high-availability failover services-redundancy-group | request chassis high-availability failover services-redundancy-group group-id peer-id peer-id | Initiate a manual failover on service redundancy group of the peer node. Use the command from the
active node of the service redundancy group. | [
{
"name": "services-redundancy-group",
"desc": "Service redundancy group on which to initiate manual failover. Range: 1 through 255"
},
{
"name": "peer-id",
"desc": "Node identifier of the SRG. After the failover, this node transitions as the new active node. Range: 1 through 10"
}
] | maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request chassis high-availability failover services-redundancy-group 1
user@host> request chassis high-availability failover services-redundancy-group 1 peer-id 2
Initiated manual failover for r... | Command introduced in Junos OS 20.4R1. | [
"Hardware Upgrade for SRX5000-Line SPC3 in a Multinode High Availability Setup"
] | |
request chassis internal-ssh | request chassis internal-ssh (prepare-setup | clear-setup) | (EX Series and QFX Series switches only) Configure the SSH keys for transferring configuration data in a
Virtual Chassis between the primary member and the other members. The command creates public SSH
keys for all Virtual Chassis members and copies the keys to all members in a full mesh manner. The
command also update... | [
{
"name": "prepare-setup",
"desc": "Create and copy the SSH keys for all members, and update the known hosts file."
},
{
"name": "clear-setup",
"desc": "Delete the SSH keys and entries in the known hosts file from all Virtual Chassis members. If you execute this option after you've enabled the c... | root
Sample Output
request chassis internal-ssh prepare-setup
root@host> request chassis internal-ssh prepare-setup
VC members
----------
fpc0
fpc1
fpc2
Creating and copying SSH keys between all VC members
----------------------------------------------------
* Copying master -> fpc1
The authenticity of host '1... | Command introduced in Junos OS Release 25.2R1. | [
"No Link Title"
] | |
request chassis mcs | request chassis mcs (offline | online | restart) slot slot-number | (M40e and M160 routers only) Control the operation of the Miscellaneous Control Subsystem (MCS). | [
{
"name": "offline",
"desc": "Take the MCS offline."
},
{
"name": "online",
"desc": "Bring the MCS online."
},
{
"name": "restart",
"desc": "Restart the MCS."
},
{
"name": "slot slot-number",
"desc": "MCS slot number. Replace slot-number with 0 or 1."
}
] | maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request chassis mcs
user@host> request chassis mcs online slot 0
MCS 0 appears to be online already | Command introduced before Junos OS Release 7.4. | [] | |
request chassis mic | request chassis mic (offline | online) fpc-slot slot-number mic-slot slot-number | (MX Series routers only) Control the operation of the Modular Interface Cards (MICs) installed on a
Modular Port Concentrator (MPC).
NOTE: On MX960 routers, if the MIC is not functioning correctly, you should take the
MPC offline, replace it with a new MPC, and reinstall the MIC. On MX104 routers, the
request chassis m... | [
{
"name": "offline",
"desc": "Take the MIC offline."
},
{
"name": "online",
"desc": "Bring the MIC online."
},
{
"name": "fpc-slot slot-number",
"desc": ""
},
{
"name": "FPC slot number where the MIC is installed:",
"desc": ""
},
{
"name": "ACX4000 router",
"d... | maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request chassis mic (MX Routers with Media Services Blade [MSB])
user@host> request chassis mic fpc-slot 1 mic-slot 0
Possible completions:
offline Take MIC offline
online ... | Command introduced in Junos OS Release 10.1.
Command introduced in Junos OS Release 24.4R1 for MX304 devices. | [] | |
request chassis optics | request chassis optics fpc-slot fpc-slot-number reactivate | (MX240, MX480, and MX960 routers) Control the status of the optical transceiver. | [
{
"name": "fpc-slot fpc-slot-number",
"desc": "Slot number of the line card that houses the optical transceiver."
},
{
"name": "MX240 router",
"desc": "Replace fpc-slot-number with a value from 0 through 2."
},
{
"name": "MX480 router",
"desc": "Replace fpc-slot-number with a value f... | maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request chassis optics (MX480 router)
user@host> request chassis optics fpc-slot 5
reactivate
Enable FPC 5 non-nebs optics.
request chassis optics (MX10003 router)
user@host>request chassis opt... | Command introduced in Junos OS Release 12.3. | [
"Determining Transceiver Support and Specifications for M Series and T Series Routers"
] | |
request chassis pcg | request chassis pcg (offline | online) slot slot-number | (M40e and M160 routers) Control the operation of the Packet Forwarding Engine (PFE) clock generator
(PCG). | [
{
"name": "offline",
"desc": "Take the PCG offline."
},
{
"name": "online",
"desc": "Bring the PCG online."
},
{
"name": "slot slot-number",
"desc": "PCG slot number. Replace slot-number with 0 or 1."
}
] | maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request chassis pcg
user@host> request chassis pcg online slot 0
PCG 1 appears to be already online | Command introduced before Junos OS Release 7.4. | [] | |
request chassis pic | request chassis pic (offline | online) fpc-slot slot-number pic-slot slot-number
<lcc number> | Control the operation of the PIC.
NOTE: Starting with Junos OS Release 12.3, it is possible that PICs brought offline by
using the request chassis fpc slot fpc-slot pic pic-slot offline operational mode command
can come online during a configuration commit or power-supply replacement procedure.
(See the following note ... | [
{
"name": "offline",
"desc": "Take the PIC offline."
},
{
"name": "online",
"desc": "Bring the PIC online."
},
{
"name": "fpc-slot slot-",
"desc": ""
},
{
"name": "number",
"desc": "Flexible PIC Concentrator (FPC) slot number. Replace slot-number with a value appropriate"... | maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request chassis pic
user@host> request chassis pic pic-slot
0 online fpc-slot 0
FPC 0, PIC 0 is already online
request chassis pic online member (MX Series Routers)
user@host> request chassis p... | Command introduced before Junos OS Release 7.4.
Option member introduced in Junos OS Release 14.2 for MX Series routers. | [] | |
request chassis pic-mode | request chassis pic-mode (intraconnect | virtual-chassis)
<all-members>
<local>
<member member-id> | Set the PIC mode on an EX4500 switch. The PIC mode command determines whether the module that
is plugged into the EX4500 switch operates as an intraconnect module or a Virtual Chassis module.
NOTE: Operating an EX4500 switch without the intraconnect module or the Virtual
Chassis module is not supported.
NOTE: If you us... | [
{
"name": "intraconnect",
"desc": "Set the PIC mode to intraconnect."
},
{
"name": "virtual-chassis",
"desc": "Set the PIC mode to Virtual Chassis."
},
{
"name": "all-members",
"desc": "(Optional) Set the PIC mode for all members of the Virtual Chassis configuration. This is the defa... | view
Sample Output
request chassis pic-mode virtual-chassis
user@switch> request chassis pic-mode virtual-chassis
request chassis pic-mode intraconnect
user@switch> request chassis pic-mode intraconnect
fpc0:
----------------------------------------------------------------------------------------------------
virtual-c... | Command introduced in Junos OS Release 11.1. | [
"Verifying the Setting for the PIC Mode on an EX4500 Switch in a Virtual Chassis",
"Configuring a Mixed Virtual Chassis with EX4200, EX4500, and EX4550 Member Switches (CLI",
"Procedure)",
"Adding an EX4500 Switch to a Preprovisioned EX4200 Virtual Chassis (CLI Procedure)",
"Adding an EX4500 Switch to a Non... | |
request chassis port-led | request chassis port-led (start | stop) fpc-slot fpc-slot-number pic-slot pic-slot-number port
(port-number| all-10g | all-25g | all-40g | all-50g | all-100g | all-400g | all-port) duration
duration | Enable remote port identification of the Modular Interface Card (MIC) or PIC by making the LED of the
appropriate active port blink for a duration of time. You can also make the LEDs of all active ports,
specific active ports, and specific port types blink. For instance, on MX480 routers with MPC7E-MRATE,
you can make ... | [
{
"name": "start",
"desc": "Start blinking of the LEDs of the specified ports."
},
{
"name": "stop",
"desc": "Stop the LEDs of the specified ports from blinking."
},
{
"name": "fpc-slot fpc-slot-number",
"desc": "(MX Series routers) Modular Port Concentrator (MPC) slot number. Replac... | view
Output Fields
When you enter this command, you are asked to verify the LED status based on your request.
Sample Output
request chassis port-led (MX2020 Routers with MPC8E)
user@host> request chassis port-led start fpc-slot
3 pic-slot 0 port all-10g duration 5
Command sent to FPC_3. Check physically about LED stat... | Command introduced in Junos OS Release 15.1F4. | [
"Craft Interface"
] | |
request chassis primary-ha-control-port-transition | request chassis primary-ha-control-port-transition <fpc FPC slot number | from-fpc-to-scb | from-
scb-to-fpc> | With this command, you can disable the FPC slot number HA port 0 on local node, and then enable the
SCB0 HA control port on local node or disable the SCB0 HA control port on local node, and then enable
the FPC slot number HA port 0 on local node.
This command is used during single control link online transition and it ... | [
{
"name": "fpc",
"desc": "Specify the FPC slot number. Range: 0 through 23"
},
{
"name": "from-fpc-to-scb",
"desc": "Transition from FPC to SCB."
},
{
"name": "from-scb-to-fpc",
"desc": "Transition from SCB to FPC."
}
] | maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request chassis primary-ha-control-port-transition
user@host> request chassis primary-ha-control-port-transition from-fpc-to-scb fpc 0
fpc 0 HA control port 0 disabled & scb 0 HA control port en... | Command introduced in Junos OS Release 21.4R1. | [
"Chassis Cluster Dual Control Links"
] | |
request chassis redundancy feb slot | request chassis redundancy feb slot slot-number (switch-to-backup | revert-from-backup) | (M120 routers only) Control the operation of the specified Forwarding Engine Board (FEB) in a
redundancy group. | [
{
"name": "slot-number",
"desc": "FEB slot number. Replace slot-number with a value from 0 through 5."
},
{
"name": "switch-to-backup",
"desc": "Initiate a switchover from the specified active FEB to the backup FEB for the redundancy group."
},
{
"name": "revert-from-backup",
"desc":... | maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request chassis redundancy feb slot 2 switch-to-backup
user@host> request chassis redundancy feb slot 2 switch-to-backup
Switch initiated, use “show chassis redundancy febs” to verify
request c... | Command introduced in Junos OS Release 8.2. | [
"Configuring FEB Redundancy on the M120 Router",
"Understanding Switching Control Board Redundancy"
] | |
request chassis routing-engine hard-disk-test | request chassis routing-engine hard-disk-test | Run a Hard Disk Drive (HDD) memory and diagnostics monitoring test for an XRE200 External Routing
Engine. The test provides output that is helpful in monitoring the status of the hard disk memory on the
XRE200 External Routing Engine. | [] | system-control
Output Fields
Table 130 on page 15075 lists the output fields for the request chassis routing-engine hard-disk-test
command. Output fields are listed in the approximate order in which they appear.
Table 130: request chassis routing-engine hard-disk-test Output Fields
Field Name
Field Description
RAID dev... | Command introduced in Junos OS Release 12.1. | [
"Hard Disk Drive (HDD) Module in an XRE200 External Routing Engine",
"XRE200 External Routing Engine Hardware Overview"
] | |
request chassis routing-engine master | request chassis routing-engine master (release | switch)
<check>
<interconnect-device name>
<node-group name>
<no-confirm> | For routers or switches with multiple Routing Engines, control which Routing Engine is the primary.
NOTE: Successive graceful Routing Engine switchover events must be a minimum of 240
seconds (4 minutes) apart after both Routing Engines have come up.
If the router or switch displays a warning message similar to “Standb... | [
{
"name": "acquire",
"desc": "(Not available for Junos OS Evolved) Attempt to become the primary Routing Engine."
},
{
"name": "release",
"desc": "(Not available for Junos OS Evolved) Request that the other Routing Engine become the primary."
},
{
"name": "switch",
"desc": "Toggle pr... | maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request chassis routing-engine primary acquire
user@host> request chassis routing-engine master acquire
warning: Traffic will be interrupted while the PFE is re-initialized
warning: The other ... | Command introduced before Junos OS Release 7.4.
all-chassis option introduced in Junos OS Release 8.0.
Command support introduced in Junos OS Evolved Release 22.1 for ACX7509 devices.
force option introduced in Junos OS Evolved Release 25.4 for PTX Series devices. | [] | |
request chassis satellite beacon | request chassis satellite beacon
<(off | on)>
<fpc-slot slot-id (off | on)>
<range range (off | on)> | This command is used to enable or disable the beacon LED on satellite devices in a Junos Fusion.
To display the status and colors of the beacon LEDs of the satellite devices in a Junos Fusion, use the
show chassis led satellite command. | [
{
"name": "off",
"desc": "Turn the beacon LED off."
},
{
"name": "on",
"desc": "Turn the beacon LED on."
},
{
"name": "range range",
"desc": "Enable or disable the beacon LED in a range of FPC slot identifiers. For example, you can specify FPC slot identifiers 101, 102, and 103 by en... | maintenance
Sample Output
request chassis satellite beacon fpc-slot 136 on
user@aggregation-device> request chassis satellite beacon fpc-slot 136 on
request chassis satellite beacon range 101-103 off
user@aggregation-device> request chassis satellite beacon range 101-103 off | Command introduced in Junos OS Release 14.2R3. | [
"Configuring or Expanding a Junos Fusion Enterprise"
] | |
request chassis satellite disable | request chassis satellite disable
<device-alias alias-name>
<fpc-slot fpc-slot> | Disable the specified satellite device from the Junos Fusion.
When a satellite device is disabled from a Junos Fusion, all extended ports are immediately placed in the
down state. The satellite device cannot send or receive traffic for the Junos Fusion until it is reenabled.
This command is useful whenever you need to ... | [
{
"name": "device-alias alias-name",
"desc": "Disable the satellite device with the specified alias name from the Junos Fusion."
},
{
"name": "fpc fpc-slot",
"desc": "Disable the satellite device with the specified FPC slot identifier from the Junos Fusion."
}
] | system-control
Sample Output
request chassis satellite disable device-alias satellite-01
user@aggregation-device> request chassis satellite disable device-alias satellite-01
Sample Output
request chassis satellite disable fpc-slot 101
user@aggregation-device> request chassis satellite disable fpc-slot 101 | Command introduced in Junos OS Release 14.2R3. | [
"Configuring Junos Fusion Provider Edge",
"Configuring or Expanding a Junos Fusion Enterprise"
] | |
request chassis satellite enable | request chassis satellite enable
<device-alias alias-name>
<fpc-slot fpc-slot> | Enable the specified device as a satellite device in a Junos Fusion.
This command is typically not used in any standard Junos Fusion initial configuration procedure. This
command is typically needed in cases where the satellite device or cascade port has been disabled and
needs to be re-enabled. | [
{
"name": "device-alias alias-name",
"desc": "Enable the satellite device with the specified alias name in the Junos Fusion."
},
{
"name": "fpc fpc-slot",
"desc": "Enable the device with the specified FPC slot ID as a satellite device in the Junos Fusion."
}
] | system-control
Sample Output
request chassis satellite enable device-alias satellite-01
user@aggregation-device> request chassis satellite enable device-alias satellite-01
Sample Output
request chassis satellite enable fpc-slot 101
user@aggregation-device> request chassis satellite enable fpc-slot 101 | Command introduced in Junos OS Release 14.2R3. | [
"Configuring or Expanding a Junos Fusion Enterprise",
"Configuring Junos Fusion Provider Edge"
] | |
request chassis satellite file-copy | request chassis satellite file-copy [remote | local] <source-URL> <destination-URL> | Copy a file between a satellite device and an aggregation device in a Junos Fusion. | [
{
"name": "local",
"desc": "Indicate that the file-copy from satellite-device has been initiated by a local user."
},
{
"name": "remote",
"desc": "Indicate that the file-copy from satellite-device has been initiated by a remote user."
},
{
"name": "source-URL",
"desc": "Specify the U... | system-control
Sample Output
request chassis satellite file-copy
root@aggregation-device> request chassis satellite file-copy local /var/tmp/file_name
sd101:/var/tmp/ | Command introduced in Junos OS Release 14.2R3. | [
"Configuring or Expanding a Junos Fusion Enterprise",
"Configuring Junos Fusion Provider Edge"
] | |
request chassis satellite install | request chassis satellite install package-name
[fpc-slot fpc-slot | device-alias device-alias]
<no-confirm> | Install a version of Junos OS software onto a satellite device in a Junos Fusion.
Any device operating as a satellite device in a Junos Fusion is running satellite software. A device
running satellite software cannot operate as a standalone network device until it is running a version of
Junos OS software.
You would ty... | [
{
"name": "package-name",
"desc": "Specify the URL to the Junos OS image to install onto the satellite device."
},
{
"name": "fpc fpc-slot",
"desc": "Install the Junos OS software onto the satellite device with the specified FPC slot ID in the Junos Fusion."
},
{
"name": "device-alias de... | system-control
Sample Output
request chassis satellite install /var/tmp/jinstall-ex-4300-14.1X53-D16.1-domestic-
signed.tgz fpc-slot 101 (EX4300 switch as satellite device)
user@aggregation-device> request chassis satellite install /var/tmp/jinstall-ex-4300-14.1X53-
D16.1-domestic-signed.tgz fpc-slot 101
Response from ... | Command introduced in Junos OS Release 14.2R3. | [
"Configuring or Expanding a Junos Fusion Enterprise",
"Configuring Junos Fusion Provider Edge"
] | |
request chassis satellite interface | request chassis satellite interface interface-name
device-mode satellite | Change the device mode for a device.
This command is used to change a device into a satellite device for a Junos Fusion. After interconnecting
a device to an aggregation device in a Junos Fusion, enter this command from the aggregation device to
begin the manual satellite device conversion procedure.
Other configuratio... | [
{
"name": "interface-name",
"desc": "Specify the name of the cascade port interface on the aggregation device that connects to the device that will be converted into a satellite device."
}
] | system-control
Sample Output
request chassis satellite interface xe-0/0/1 device-mode satellite
user@aggregation-device> request chassis satellite interface xe-0/0/1 device-mode satellite | Command introduced in Junos OS Release 14.2R3. | [
"Configuring Junos Fusion Provider Edge",
"Configuring or Expanding a Junos Fusion Enterprise"
] | |
request chassis satellite login | request chassis satellite login
<fpc-slot fpc-slot>
<interface-name interface-name> | Log in to the satellite device from the aggregation device.
This command is typically used to log in to the satellite device by expert users for debugging purposes.
You can perform all configuration and administration tasks in a Junos Fusion from the aggregation
device. | [
{
"name": "fpc fpc-slot",
"desc": "Log in to the satellite device with the specified FPC slot ID."
},
{
"name": "interface-name",
"desc": ""
},
{
"name": "interface-name",
"desc": "Log in to the satellite device connected to the specified interface. The interface-name is the cascade ... | system-control
Sample Output
request chassis satellite login fpc-slot 101
user@aggregation-device> request chassis satellite login fpc-slot 101 | Command introduced in Junos OS Release 14.2R3. | [
"Configuring or Expanding a Junos Fusion Enterprise",
"Configuring Junos Fusion Provider Edge"
] | |
request chassis satellite reboot | request chassis satellite reboot
<fpc-slot fpc-slot>
<range range> | Reboot the satellite device or devices from the aggregation device in a Junos Fusion. | [
{
"name": "fpc fpc-slot",
"desc": "Reboot the satellite device with the specified FPC slot identifier."
},
{
"name": "range range",
"desc": "Reboot all satellite devices in a range of FPC slot identifiers. For instance, you can reboot the satellite devices using FPC slot identifiers 101, 102, an... | system-control
Sample Output
request chassis satellite reboot fpc 101
user@aggregation-device> request chassis satellite reboot fpc 101
Sample Output
request chassis satellite reboot range 101-103
user@aggregation-device> request chassis satellite reboot range 101-103 | Command introduced in Junos OS Release 14.2R3. | [
"Configuring or Expanding a Junos Fusion Enterprise",
"Configuring Junos Fusion Provider Edge"
] | |
request chassis satellite restart | request chassis satellite restart
[fpc-slot fpc-slot | range range]
<process-name> | Restart a process on a satellite device or devices from the aggregation device in a Junos Fusion.
You would typically restart a process in a Junos Fusion for troubleshooting or debugging purposes.
This command is intended for use by expert users for debugging purposes. | [
{
"name": "fpc fpc-slot",
"desc": "Restart the specified process on the satellite device in the specified FPC slot ID only."
},
{
"name": "range",
"desc": "Restart the process on the satellite devices in the specified range of FPC slot IDs only. For instance, if you want to reboot the satellite ... | system-control | Command introduced in Junos OS Release 14.2R3. | [
"Configuring or Expanding a Junos Fusion Enterprise",
"Configuring Junos Fusion Provider Edge"
] | |
request chassis satellite shell-command | request chassis satellite shell-command
[fpc-slot fpc-slot |range ]
<remote-command> | Run a UNIX shell command for a satellite device from the aggregation device in a Junos Fusion. | [
{
"name": "fpc fpc-slot",
"desc": "Run the shell command on the satellite device using the specified FPC slot identifier only."
},
{
"name": "range",
"desc": "Run the shell command on the satellite devices in the specified range of FPC slot identifiers only. For instance, you can run the shell c... | system-control | Command introduced in Junos OS Release 14.2R3. | [
"Configuring or Expanding a Junos Fusion Enterprise",
"Configuring Junos Fusion Provider Edge"
] | |
request chassis scg | request chassis scg lcc number (offline | online) slot slot-number | (T Series routers only) Control the operation of the specified SONET Clock Generator (SCG). | [
{
"name": "lcc number",
"desc": "(TX Matrix router and TX Matrix Plus router only) (Optional) Line-card chassis number. Replace number with the following values depending on the LCC configuration: 0 through 3, when T640 routers are connected to a TX Matrix router in a routing matrix. 0 through 3, when T16... | maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request chassis scg
user@host> request chassis scg online slot 0
Online initiated, use "show chassis environment scg" to verify | Command introduced before Junos OS Release 7.4. | [
"Configuring the Clock Source",
"T320 SONET Clock Generator (SCG) Description"
] | |
request chassis sfb | request chassis sfb
<(offline | online) slot slot-number>
<slot slot-number (offline | online)> | Control the operation of the Switch Fabric Board (SFB). Configure the SFBs on a slot to online or offline.
command. | [
{
"name": "all-members",
"desc": "(Optional) Control the operation of the SFB in all members of the Virtual Chassis configuration."
},
{
"name": "local",
"desc": "(Optional) Control the operation of the SFB in the local Virtual Chassis member."
},
{
"name": "member",
"desc": ""
},
... | maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request chassis sfb
user@host> request chassis sfb offline slot
Backup SFB 1 cannot be set offline, backup RE is online
request chassis sfb (MX2010 Routers)
user@host> request chassis sfb offl... | Command introduced in Junos OS Release 12.3.
all-members, local, and member member-id options introduced in Junos OS Release 15.1 for MX2020 and
MX2010 routers. | [] | |
request chassis sfm master switch | request chassis sfm master switch
<no-confirm> | (M40e and M160 routers only) Control which Switching and Forwarding Module (SFM) is primary. | [
{
"name": "no-confirm",
"desc": "(Optional) Do not display a switch warning or query. Additional Information By default, the SFM in slot 0 (SFM0) is the primary and the SFM in slot 1 (SFM1) is the backup. If you use this command to change the primary, and then restart the chassis software for any reason, th... | maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request chassis sfm primary switch
user@host> request chassis sfm master switch
warning: Traffic will be interrupted while the PFE is re-initialized
Toggle mastership between system forwarding ... | Command introduced before Junos OS Release 7.4. | [
"Switching the Global Primary and Backup Roles in a Virtual Chassis Configuration"
] | |
request chassis sfm | request chassis sfm (offline | online | restart) slot slot-number | (M40e and M160 routers only) Control the operation of the specified Switching and Forwarding Module
(SFM). | [
{
"name": "offline",
"desc": "Take the SFM offline."
},
{
"name": "online",
"desc": "Bring the SFM online."
},
{
"name": "restart",
"desc": "Restart the SFM."
},
{
"name": "slot slot-number",
"desc": "SFM slot number. Replace slot-number with a value from 0 through 3."
... | maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request chassis sfm (M40e)
user@host> request chassis sfm slot 1 restart
M40e router:
error: SFM 0 is transitioning to online state.
request chassis sfm (M160)
user@host> request chassis sfm sl... | Command introduced before Junos OS Release 7.4. | [
"Configuring SFM Redundancy on M40e and M160 Routers",
"M40e Switching and Forwarding Module (SFM) Description"
] | |
request chassis sib | request chassis sib (offline | online) slot slot-number | Control the operation of the specified Switch Interface Board (SIB). | [
{
"name": "f13 slot-number",
"desc": "Control the operation of F13 SIBs. Replace slot-number with a value 0, 1, 3, 4, 6, 7, 8, 9, 11, or 12."
},
{
"name": "offline",
"desc": "Take the SIB offline. NOTE: In PTX Series (PTX3000 and PTX5000) and T Series (T640 and T1600) Routers with active PFE int... | maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request chassis sib online
user@host> request chassis sib slot 0 online
Online initiated, use "show chassis sibs" to verify
request chassis sib offline
user@host> request chassis sib f13 slot 0... | Command introduced before Junos OS Release 7.4.
f13 and f2s options for the TX Matrix Plus router introduced in Junos OS Release 9.6. | [
"Configuring Junos OS to Upgrade and Downgrade Switch Interface Boards on a TX Matrix Router",
"M320 SIB Description"
] | |
request chassis spmb restart | request chassis spmb restart (lcc number | sfc number) slot slot-number | Restart the specified Switch Processor Mezzanine Board (SPMB) on the Control Board (CB). | [
{
"name": "all-members",
"desc": "(MX2010, MX2020, and MX2008 routers only) (Optional) Restart the SPMB on the CB in all members of the Virtual Chassis configuration."
},
{
"name": "lcc number",
"desc": "(TX Matrix router and TX Matrix Plus router only) (Optional) Line-card chassis number. Repla... | maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request chassis spmb restart
user@host> request chassis spmb restart slot
request chassis spmb restart (MX2010 Router)
user@host> request chassis spmb restart slot 0
Restart initiated, use "sho... | Command introduced before Junos OS Release 7.4.
sfc option for the TX Matrix Plus router introduced in Junos OS Release 9.6.
all-members, local, and member member-id options introduced in Junos OS Release 15.1 for MX2020 and
MX2010 routers. | [] | |
request chassis ssb master switch | request chassis ssb master switch
<no-confirm> | (M20 router only) Control which System and Switch Board (SSB) is primary. | [
{
"name": "no-confirm",
"desc": "(Optional) Do not request confirmation for the switch. Additional Information By default, the SSB in slot 0 (SSB0) is the primary and the SSB in slot 1 (SSB1) is the backup. If you use this command to change the primary, and then restart the chassis software for any reason, ... | maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request chassis ssb primary switch
user@host> request chassis ssb master switch
warning: Traffic will be interrupted while the PFE is re-initialized
Toggle mastership between system switch boar... | Command introduced before Junos OS Release 7.4. | [] | |
request chassis synchronization mode | request chassis synchronization mode (free-run | holdover | auto-select) | (MX5-T, MX10-T, MX40-T, MX80, MX80-T, MX240, MX480, and MX960 routers only) Change the
chassis synchronization source used for Synchronous Ethernet configuration. | [
{
"name": "freerun",
"desc": "Change chassis synchronization to free-run mode."
},
{
"name": "holdover",
"desc": "Change chassis synchronization to holdover mode."
},
{
"name": "auto-select",
"desc": "Change chassis synchronization to auto-select mode."
}
] | maintenance
Output Fields
When you enter this command, the current status of your request is displayed.
•
Not configured—Indicates that the source is not configured.
•
Present—Indicates that the source is configured and present.
•
Qualified—Indicates that the source is being used for synchronization.
Sample Output
requ... | Command introduced in Junos OS Release 11.2R4. | [
"Synchronous Ethernet Overview",
"Configuring an External Clock Synchronization Interface for MX Series Routers"
] | |
request chassis synchronization switch | request chassis synchronization switch (bits-a | bits-b | fpc-slot-number | gps-0 | gps-1 ) | (M320, M40e, M120, T320, T640, and T1600 routers and PTX Packet Transport Routers only) Change
the external clock source used for chassis synchronization. | [
{
"name": "external-a",
"desc": "(Routing matrix only) Change the synchronization source to external source A."
},
{
"name": "external-b",
"desc": "(Routing matrix only) Change the synchronization source to external source B."
},
{
"name": "bits-a",
"desc": "(PTX Series only) Change ... | maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request. Not configured
indicates that the source is not configured. Present indicates that the source is configured and present.
Qualified indicates that the source is being used for synchronization.
Sample Output
re... | Command introduced in Junos OS Release 7.6. | [
"Configuring Clock Synchronization Interface on MX Series Routers",
"Supported Time Synchronization Standard"
] | |
request chassis system-mode | request chassis system-mode
<mode-2x100G>
<default-mode> | Set the operating mode of the ports to 100-Gigabit Ethernet mode on an EX4300-48MP switch. The
request chassis system-mode command sets the ports to 100-Gigabit Ethernet mode by overriding the set
chassis fpc fpc-slot pic pic-slot port port-number speed speed value command. This command restarts the DC
packet forwardi... | [
{
"name": "mode-2x100G",
"desc": "PIC mode configuration is 2x100Gbps. This will restart PFE and disable VCP ports."
},
{
"name": "default-mode",
"desc": "Default-mode is the oversubscribed mode. This will restart PFE."
}
] | view
Sample Output
request chassis system-mode
user@switch> request chassis system-mode mode-2x100G (mode - 2x100G on EX4300-48MP)
System-mode has changed. This will restart PFE and disable VCP ports.
request chassis system-mode (EX4300-48MP)
user@switch> request chassis system-mode default-mode
System-mode has changed... | Command introduced in Junos OS Release 19.3R1. | [
"Uplink Modules in EX4300 Switches",
"Set the Operational Mode on a 2-Port 40-Gigabit Ethernet QSFP+/100-Gigabit Ethernet QSFP28",
"Uplink Module"
] | |
request component login | request component login component-name | (QFabric systems only) Log in to a QFabric system component. To gain access to individual components
by way of the request component login command, you must first provide the qfabric-admin or qfabric-operator
class privilege to your user (for more information, see: remote-debug-permission). | [
{
"name": "component-name",
"desc": "Specify the QFabric system component to which you wish to log in."
}
] | admin
Sample Output
The three sample output displays show the results of attempts to log in to Node device EE3093. The
results differ depending on the privilege level assigned to the user.
request component login (with qfabric-admin Privileges)
admin@qfabric> request component login EE3093
Warning: Permanently added '... | Command introduced in Junos OS Release 14.1X53-D20. | [] | |
request csds add-vsrx | request csds add-vsrx csds-instance-id csds-instance-id image image-name | The command copies the vSRX Virtual Firewall image from Junos Node Unifier (JNU) controller to Junos
Device Manager (JDM) in the Connected Security Distributed Services (CSDS) architecture. The
command also starts the virtual network functions (VNFs). Run the command as the root user. | [
{
"name": "csds-instance-id csds-instance-id",
"desc": "Specify CSDS instance ID."
},
{
"name": "image image-name",
"desc": "Specify vSRX Virtual Firewall image name."
}
] | maintenance
Sample Output
request csds add-vsrx
user@host> request csds add-vsrx csds-instance-id 1 image /var/tmp/junos-vsrx3-x86-64-24.4.qcow2
Starting to copy the VSRX package from MX to server
Finished Copying the VSRX package from Controller to host
Successfully updated the VSRX image path in platform_attributes .... | Command introduced in Junos OS Release 24.4R1. | [
"Junos Device Manager for CSDS",
"Junos Node Unifier for CSDS"
] | |
request csds authenticate-host | request csds authenticate-host csds-instance-id csds-instance-id | The command sets up a one-way key exchange between the Junos Node Unifier (JNU) controller and
the host. This process provides the controller with passwordless SSH access to the server. As a result,
the controller can operate Junos Device Manager (JDM) remotely in the Connected Security Distributed
Services (CSDS) fram... | [
{
"name": "csds-instance-id csds-instance-id",
"desc": "Specify CSDS instance ID."
}
] | maintenance
Sample Output
request csds authenticate-host
user@host> request csds authenticate-host csds-instance-id 3
The authenticity of host '10.157.79.104 (10.157.79.104)' can't be established.
ED25519 key fingerprint is SHA256:$ABC123.
This key is not known by any other names.
Are you sure you want to continue conn... | Command introduced in Junos OS Release 24.4R1. | [
"Junos Node Unifier for CSDS",
"Junos Device Manager for CSDS"
] | |
request csds delete-vsrx | request csds delete-vsrx csds-instance-id csds-instance-id
request csds delete-vsrx csds-instance-id csds-instance-id force | Remove currently running VNFs. The command deletes the running vSRX Virtual Firewall in Connected
Security Distributed Services (CSDS) architecture in JNU topology. Run the command as the root user. | [
{
"name": "csds-instance-id csds-instance-id",
"desc": "Specify CSDS instance ID."
},
{
"name": "force",
"desc": "Perform operation by discarding any uncommitted changes."
}
] | maintenance | Command introduced in Junos OS Release 24.4R1. | [
"Junos Device Manager for CSDS",
"Junos Node Unifier for CSDS"
] | |
request csds extract-vsrx-keys | request csds extract-vsrx-keys csds-instance-id csds-instance-id
request csds extract-vsrx-keys csds-instance-id csds-instance-id force | Within the Connected Security Distributed Services (CSDS) architecture, the Junos Node Unifier (JNU)
controller extracts public key information of vSRX Virtual Firewall spawned by the Junos Device
Manager (JDM) using this command. Run the command as the root user. | [
{
"name": "csds-instance-id",
"desc": "Specify CSDS instance ID."
},
{
"name": "force",
"desc": "Perform operation by discarding any uncommitted changes."
}
] | maintenance
Sample Output
request csds extract-vsrx-keys
user@host> request csds extract-vsrx-keys csds-instance-id 5
Perform Extracting the Keys on vnf0
The authenticity of host '10.157.80.183 (10.157.80.183)' can't be established.
ED25519 key fingerprint is SHA256:$ABC123.
This key is not known by any other names.
A... | Command introduced in Junos OS Release 24.4R1. | [
"Junos Device Manager for CSDS",
"Junos Node Unifier for CSDS"
] | |
request csds jdm | request csds jdm add csds-instance-id csds-instance-id image vsrx-image-with-path
request csds jdm add csds-instance-id csds-instance-id image vsrx-image-with-path force
request csds jdm delete csds-instance-id csds-instance-id
request csds jdm delete csds-instance-id csds-instance-id force | The command either installs a new Junos Device Manager (JDM) package or removes currently installed
JDM package in Junos Node Unifier (JNU) for Connected Security Distributed Services (CSDS)
architecture. Run the command as the root user. | [
{
"name": "add",
"desc": "Install a JDM package."
},
{
"name": "delete",
"desc": "Remove currently installed JDM package."
},
{
"name": "csds-instance-id csds-instance-id",
"desc": "Specify CSDS instance ID."
},
{
"name": "force",
"desc": "Perform operation by discarding ... | maintenance
Sample Output
request csds jdm add
user@host> request csds jdm add csds-instance-id 3 image /var/tmp/csds-jdm-24.4-
I.20241027.0.2259.x86_64.deb
Starting to validate the Package
Finished validating the Package
Starting to copy the DEB package from Controller to host
Finished Copying the DEB package from Con... | Command introduced in Junos OS Release 24.4R1. | [
"Junos Node Unifier for CSDS",
"Junos Device Manager for CSDS"
] | |
request csds sync-controller | request csds sync-controller other-controller-ip other-controller-ip
request csds sync-controller other-controller-ip other-controller-ip force | The command synchronizes the primary controller with the other controller in dual controller Junos
Node Unifier (JNU) topology in Connected Security Distributed Services (CSDS) architecture. Run the
command from the second controller. Run the command as the root user. | [
{
"name": "other-controller-ip other-controller-ip",
"desc": "Specify the other controller IP in dual node JNU controller topology."
},
{
"name": "force",
"desc": "Perform operation by discarding any uncommitted changes."
}
] | maintenance
Sample Output
request csds sync-controller
user@host> request csds sync-controller other-controller-ip 10.205.163.102
The authenticity of host '10.205.163.102 (10.205.163.102)' can't be established.
ED25519 key fingerprint is SHA256:$ABC123.
This key is not known by any other names.
Are you sure you want t... | Command introduced in Junos OS Release 24.4R1. | [
"Junos Device Manager for CSDS",
"Junos Node Unifier for CSDS"
] | |
request debug information | request debug information
<mgd> | Consolidate debugging information for the component specified. You can issue the command without a
component specified
Using this command speeds up the initial information-gathering phase of debugging. The output
includes the combined output of multiple member commands. | [
{
"name": "mgd",
"desc": "(Optional) Display debug information for the Management process (mgd) workflows."
}
] | maintenance, view, and view-configuration
Sample Output
request debug information mgd
user@host> request debug information mgd | Command introduced in Junos OS Release 19.4R1 with mgd component. | [] | |
request dhcp client renew | request dhcp client renew
[all|interface <interface-name>]
routing-instance <routing-instance-name> | Initiates a renew request for the specified clients if they are in the bound state. | [
{
"name": "all",
"desc": "Initiate renew requests for all DHCP clients. If you specify a routing instance, renew requests are initiated for all DHCP clients within that routing instance."
},
{
"name": "interface",
"desc": ""
},
{
"name": "<interface-name>",
"desc": "Initiate renew re... | view
Output Fields
This command produces no output. | Statement introduced in Junos OS Release 12.1X44-D10. | [] | |
request dhcp relay bulk-leasequery | request dhcp relay bulk-leasequery
<all-configured-ip>
<client-id | ipv4-address | mac-address>
<relay-id relay-id>
<remote-id remote-id>
<server-address server-address | server-group group-name>
<logical-system logical-system-name>
<routing-instance routing-instance-name> | Initiate a bulk leasequery operation to update the binding information for multiple subscribers by
requesting that the DHCPv4 relay agent send the bulk leasequery message to the configured DHCPv4
servers. The DHCP bulk leasequery feature must be configured on the DHCPv4 relay agent. If you do
not specify a server-addre... | [
{
"name": "all-configured-ip",
"desc": "Update binding information for all IP addresses configured in the local server. The information is returned regardless of whether the IP addresses are part of a currently active binding and regardless of remote Id or relay ID. This enables the relay agent to update it... | view
Output Fields
When you enter this command, DHCP relay agent initiates the bulk leasequery operation.
Sample Output
request dhcp relay bulk-leasequery
user@host> request dhcp relay bulk-leasequery 4/1224 server-address 192.168.10.10 | Command introduced in Junos OS Release 16.1.
all-configured-ip, relay-id, and remote-id options added in Junos OS Release 19.1R1. | [
"DHCP Leasequery Methods"
] | |
request dhcp relay leasequery | request dhcp relay leasequery (client-id | ipv4-address | mac-address)
gateway-address giaddr;
<server-address address | server-group group-name>
<logical-system logical-system-name>
<routing-instance routing-instance-name> | Initiate a leasequery operation to update the binding information for a specific subscriber by requesting
that DHCPv4 relay agent send the leasequery message to the configured DHCP servers. The DHCP
leasequery feature must be configured on the DHCPv4 relay agent. If you do not specify a server-address
or server-group, ... | [
{
"name": "client-id",
"desc": "Use the DHCPv4 client identifier option (option 61) to identify the client whose binding information is requested."
},
{
"name": "gateway-address",
"desc": ""
},
{
"name": "giaddr",
"desc": "Gateway address of the relay agent making the request; the va... | view
Output Fields
When you enter this command, DHCP relay agent initiates the leasequery operation.
Sample Output
request dhcp relay leasequery
user@host> request dhcp relay leasequery 192.168.25.25 server-group DHCPgroup-10 | Command introduced in Junos OS Release 16.1. | [
"DHCP Leasequery Methods"
] | |
request dhcp server reconfigure | request dhcp server reconfigure (all | address | interface interface–name | logical-system logical-system–
name | routing-instance routing-instance–name) | Initiate reconfiguration processing for the specified DHCP clients if they are in the bound state. If the
clients are in the reconfiguring state, this command has no effect. If the clients are in any state other
than bound or reconfiguring, this command has the same effect as the clear dhcp server binding command.
When... | [
{
"name": "all",
"desc": "Initiate reconfiguration for all DHCP clients."
},
{
"name": "address",
"desc": "Initiate reconfiguration for DHCP client with the specified IP address or MAC address."
},
{
"name": "interface",
"desc": ""
},
{
"name": "interface-name",
"desc": "... | view
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request dhcp server reconfigure
user@host> request dhcp server reconfigure interface fe-0/0/0.100 | Command introduced in Junos OS Release 10.0. | [
"Configuring Dynamic Reconfiguration of Extended Local Server Clients Overview"
] | |
request dhcpv6 client renew | request dhcpv6 client renew
[all | interface interface-name]
routing-instance <routing-instance-name> | Initiate a renew request for the specified DHCPv6 clients if they are in the bound state. | [
{
"name": "all",
"desc": "Initiate renew requests for all DHCPv6 clients. If you specify a routing instance, renew requests are initiated for all DHCPv6 clients within that routing instance."
},
{
"name": "interface-name",
"desc": ""
},
{
"name": "interface-name",
"desc": "Initiate r... | view
Output Fields
This command produces no output. | Statement introduced in Junos OS Release 12.1X45-D10. | [] | |
request dhcpv6 relay bulk-leasequery | request dhcpv6 relay bulk-leasequery
<client-id | ipv6-prefix| link-address ipv6-link-address | relay-id relay-id | remote-id remote-
id>
<server-address server-address | server-group group-name>
<logical-system logical-system-name>
<routing-instance routing-instance-name> | Initiate a bulk leasequery operation to update the binding information for multiple subscribers by
requesting that the DHCPv6 relay agent send the bulk leasequery message to the configured DHCPv6
servers. The DHCP bulk leasequery feature must be configured on the DHCPv6 relay agent. If you do
not specify a server-addre... | [
{
"name": "client-id",
"desc": "Update binding information for clients identified by the DHCP Unique Identifier (DUID) specified DHCPv6 Client ID option (option 1)."
},
{
"name": "ipv6-prefix",
"desc": "Update binding information for clients identified by the specified IPv6 prefix."
},
{
... | view
Output Fields
When you enter this command, DHCPv6 relay agent initiates the bulk leasequery operation.
Sample Output
request dhcpv6 relay bulk-leasequery
user@host> request dhcpv6 relay bulk-leasequery LL0x1-00:00:65:03:01:02 server-address
2001:db8:3000:0:8001::5/128 | Command introduced in Junos OS Release 16.1. | [
"DHCP Leasequery Methods"
] | |
request dhcpv6 relay leasequery | request dhcpv6 relay leasequery (client-id | ipv6-prefix)
<server-address server-address | server-group group-name>
<logical-system logical-system-name>
<routing-instance routing-instance-name> | Initiate a leasequery operation to update the binding information for a specific subscriber by requesting
that the DHCPv6 relay agent send the leasequery message to the configured DHCP servers. The DHCP
leasequery feature must be configured on the DHCPv6 relay agent. If you do not specify a server-address
or server-gro... | [
{
"name": "client-id",
"desc": "Use the DHCPv6 Client ID option (option 1) to identify the client whose binding information is requested."
},
{
"name": "ipv6-prefix",
"desc": "Use the IPv6 prefix to identify the client whose binding information is requested."
},
{
"name": "logical-system... | view
Output Fields
When you enter this command, DHCPv6 relay agent initiates the leasequery operation.
Sample Output
request dhcpv6 relay leasequery
user@host> request dhcpv6 relay leasequery 2001:db8:3000:0:8001::5/128 | Command introduced in Junos OS Release 16.1. | [
"DHCP Leasequery Methods"
] | |
request dhcpv6 server reconfigure | request dhcpv6 server reconfigure (all | address | client-id | interface interface-name | logical-system
logical-system-name | routing-instance routing-instance-name | session-id) | Initiate reconfiguration processing for the specified DHCPv6 clients if they are in the bound state. If the
clients are in the reconfiguring state, this command has no effect. If the clients are in any state other
than bound or reconfiguring, this command has the same effect as the clear dhcpv6 server binding
command.
... | [
{
"name": "all",
"desc": "Initiate reconfiguration for all DHCPv6 clients."
},
{
"name": "address",
"desc": "Initiate reconfiguration for DHCPv6 client with the specified IPv6 address."
},
{
"name": "client-id",
"desc": "Initiate reconfiguration for DHCPv6 client with the specified c... | view
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request dhcpv6 server reconfigure
user@host> request dhcpv6 server reconfigure 2001db8::2/16 | Command introduced in Junos OS Release 10.4. | [
"Configuring Dynamic Reconfiguration of Extended Local Server Clients Overview"
] | |
request diagnostics tdr | request diagnostics tdr (abort | start) interface interface-name | Start a time domain reflectometry (TDR) diagnostic test on the specified interface. This test
characterizes and locates faults on twisted-pair Ethernet cables. For example, it can detect a broken
twisted pair and provide the approximate distance to the break. It can also detect polarity swaps, pair
swaps, and excessive... | [
{
"name": "abort",
"desc": "Stop the TDR test currently in progress on the specified interface. No results are reported, and previous results, if any, are cleared."
},
{
"name": "interface-name",
"desc": "The name of the interface."
},
{
"name": "start",
"desc": "Start a TDR test on ... | maintenance
Output Fields
Table 131 on page 15164 lists the output fields for the request diagnostics tdr command. Output fields
are listed in the approximate order in which they appear.
Table 131: request diagnostics tdr Output Fields
Field Name
Field Description
Test Status
Information about the status of the TDR te... | Command introduced in Junos OS Release 9.0. | [
"Diagnosing a Faulty Twisted-Pair Cable (CLI Procedure)"
] | |
request evpn validate-maintenance-mode-pre-checks | request evpn validate-maintenance-mode-pre-checks
erb-leaf | Use the request evpn validate-maintenance-mode-pre-checks erb-leaf command and its companion show evpn
maintenance-mode-status command to ensure the device configuration and state meets the prerequisites for
EVPN maintenance mode. These commands can be ran before, during, or after configuring maintenance
mode, and shou... | [
{
"name": "erb-leaf",
"desc": "Validate pre-checks for EVPN ERB style of deployment for leaf node"
}
] | maintenance | Statement introduced in Junos OS Release 25.3R1 | [
"EVPN Maintenance Mode for Multihomed Leaf Isolation"
] | |
request extension-service (start | stop) | request extension-service (start | stop) application-name
<invoke-debugger cli> | Start or stop a JET application running on a device running Junos OS. | [
{
"name": "application-name",
"desc": "Name of application to be started or stopped."
},
{
"name": "invoke-debugger cli",
"desc": "(Optional) Starts the extension service process in debugger mode."
}
] | maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
command-name
user@device> request extension-service start cmdline_args.py
Extension-service application 'cmdline_args.py' started with pid: 99418 | Command introduced in Junos OS Release 16.1. | [] | |
request extension-service restart-daemonize-app | request extension-service restart-daemonize-app application-name | Restart a daemonized application running on a Junos device.
A daemonized application runs as a process in the background. An application configured to run as a
daemonized process is automatically triggered upon commit. Restarting the application can assist you
with debugging and troubleshooting. | [
{
"name": "application-name",
"desc": "Name of application to be restarted."
}
] | maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request. | Command introduced in Junos OS and Junos OS Evolved Release 23.2R1. | [] | |
request fabric administration director-group change-master | request fabric administration director-group change-master (director-device director-device-name) | (QFabric systems only) Select a Director device to become the new primary device within a Director
group. The specified device becomes the new primary Director device, and the previous primary
Director device becomes a backup Director device. | [
{
"name": "none",
"desc": "Change the device that controls the Director group. Assign the current backup Director device as the new primary and the current primary Director device as the backup."
},
{
"name": "director-device",
"desc": ""
},
{
"name": "director-device-name",
"desc": ... | admin
Sample Output
request fabric administration director-group change-primary
user@qfabric> request fabric administration director-group change-master
Do you intend to switchover mastership? [yes,no] (no) yes
Cluster master successfully switched | Command introduced in Junos OS Release 11.3. | [
"Performing the QFabric System Initial Setup on a QFX3100 Director Group",
"Understanding the Director Group"
] | |
request fabric administration power-off interconnect-device fpc | request fabric administration power-off interconnect--device (serial-id | alias-name) fpc slot-
number | In QFX3000-G QFabric systems, you can use this command to power off a 16-Port QSFP+ front card in
a QFX3008-I Interconnect device.
A message appears on the console or console log, confirming that the operating system has stopped on
the device. | [
{
"name": "serial-id | alias-name",
"desc": "Provide the serial ID or alias name of the QFX3008-I Interconnect device."
},
{
"name": "slot slot-number",
"desc": "Provide the slot number of the 16-Port QSFP+ front card in the QFX3008-I Interconnect device. The range of slot numbers is 0 through 1... | maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request fabric administration power-off interconnect-device fpc 13
user@qfabric request fabric administration power-off interconnect-device IC-12345 fpc 13
STEP 1 of 6 (Acquiring lock):
Acquirin... | Command introduced in Junos OS Release 14.1X53-D15. | [] | |
request fabric administration power-off interconnect-device | request fabric administration power-off interconnect--device (serial-id | alias-name) | In QFX3000-G QFabric systems, you can use this command to power off QFX3008-I Interconnect
devices.
This command systematically takes the device offline and gracefully shuts down the device while
preserving system state information. A message appears on the console or console log, confirming that
the operating system h... | [
{
"name": "serial-id | alias-name",
"desc": "Provide the serial ID or alias name of the device. Additional Information"
}
] | maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request fabric administration power-off interconnect-device
user@qfabric request fabric administration power-off interconnect-device IC-12345
STEP 1 of 7 (Acquiring lock):
Acquiring lock to perf... | Command introduced in Junos OS Release 14.1X53-D15. | [] | |
request fabric administration power-off node-device | request fabric administration power-off node-device (serial-id | alias-name) | In QFX3000-G QFabric systems, you can use this command to power off QFX3500, QFX3600,
QFX5100-48S, QFX5100-48T, and QFX5100-24Q devices in server Node groups, redundant server
Node groups, and network Node groups. In QFX3000-M QFabric systems, you can use this command to
power off QFX5100-24Q Interconnect devices and Q... | [
{
"name": "serial-id | alias-name",
"desc": "Provide the serial ID or alias name of the device. Additional Information"
}
] | maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request fabric administration power-off node-device
user@qfabric request fabric administration power-off node-device ED1234
STEP 1 of 8 (Acquiring lock):
Acquiring lock to perform this operatio... | Command introduced in Junos OS Release 14.1X53-D15. | [] | |
request fabric administration remove | request fabric administration remove (interconnect-device interconnect-device-name | node-device
node-device-name) | (QFabric systems only) Remove a disconnected Interconnect or Node device from the QFabric system
inventory so that it does not appear in the output of the show fabric administration inventory command.
NOTE:
•
You cannot remove any devices that appear in the Connected state in the output of the
show fabric administrati... | [
{
"name": "interconnect-device interconnect-device-name",
"desc": "Remove a disconnected Interconnect device from the QFabric system inventory."
},
{
"name": "node-device node-device-name",
"desc": "Remove a disconnected Node device from the QFabric system inventory."
}
] | admin
Sample Output
request fabric administration remove interconnect-device
user@qfabric> request fabric administration remove interconnect-device IC1
Device successfully removed
Sample Output
request fabric administration remove node-device
user@qfabric> request fabric administration remove node-device node5
Device ... | Command introduced in Junos OS Release 11.3. | [] | |
request fabric administration system mac-pool add | request fabric administration system mac-pool add mac-base starting-mac-address count number-of-
mac-address | (QFabric systems only) Add a MAC address pool to expand the initial set of MAC addresses assigned to
the QFabric system. | [
{
"name": "mac-base starting-mac-address",
"desc": "Set the starting MAC address for a pool of addresses assigned to the QFabric system."
},
{
"name": "count number-of-mac-address",
"desc": "Set the total number of MAC addresses in the specified address pool assigned to the QFabric system."
}
... | admin
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request fabric administration system mac-pool add mac-base starting-mac-address count
user@switch> request fabric administration system mac-pool add mac-base 02:00:00:11:22:00 count | Command introduced in Junos OS Release 11.3. | [] | |
request fabric administration system mac-pool delete | request fabric administration system mac-pool delete mac-base starting-mac-address | (QFabric systems only) Delete a range of MAC addresses assigned manually to the QFabric system.
NOTE: You cannot delete the MAC address range assigned during the initial setup of the
QFabric system. Also, you cannot delete a MAC address range if the MAC address block
is still in use. | [
{
"name": "mac-base starting-mac-address",
"desc": "Specify the starting MAC address for a pool of addresses you wish to remove from the QFabric system. Additional Information After you issue the request fabric administration system mac-pool delete command, issue the \"show fabric administration system mac-... | admin
Output Fields
Sample Output
request fabric administration system mac-pool delete mac-base
user@switch> request fabric administration system mac-pool delete mac-base 02:00:00:11:22:00 | Command introduced in Junos OS Release 11.3. | [] | |
request fibre-channel proxy load-rebalance | request fibre-channel proxy load-rebalance
<dry-run>
fabric <fabric-name>
<brief | detail> | Rebalance the link load on one or more FCoE-FC gateway proxy fabrics (local Fibre Channel fabrics on
the gateway) on demand. Load rebalancing is a disruptive action that forces some or all sessions
(depending on the configured load-balancing algorithm) to log out and then log in again. When sessions
log in again, they ... | [
{
"name": "dry-run",
"desc": "(Optional) Simulates performing link load rebalancing and displays a list of sessions that might be affected if you rebalance the link loads."
},
{
"name": "fabric fabric-name",
"desc": "Name of the fabric on which you want to rebalance the link loads. If you do not... | maintenance
Output Fields
Table 132 on page 15184 lists the output fields for the request fibre-channel proxy load-rebalance dry-run
command. Output fields are listed in the approximate order in which they appear.
Table 132: request fibre-channel proxy load-rebalance dry-run Output Fields
Field Name
Field Description
... | Command introduced in Junos OS Release 12.3. | [
"Monitoring Fibre Channel Interface Load Balancing",
"Simulating On-Demand Fibre Channel Link Load Rebalancing (Dry Run Test)",
"Defining the Proxy Load-Balancing Algorithm",
"Example: Configuring Automated Fibre Channel Interface Load Rebalancing",
"Understanding Load Balancing in an FCoE-FC Gateway Proxy ... | |
request flight-recorder set high-cpu | request flight-recorder set high-cpu
<disable>
<backoff-duration seconds>
<collect-core>
<cpu-threshold percentage>
<logical-system>
<num-snapshots number>
<polling-frequency frequency> | Enable flight recorder tool to collect snapshots of historical data on when the CPU utilization for the
routing protocol process on a device was high and what processes caused the high utilization. The
detection of high CPU usage enables faster resolution of issues.
The recorded snapshots and core files are saved as l... | [
{
"name": "none",
"desc": "Enable flight recorder tool to collect snapshots of data used for detecting high CPU utilization. The recorded snapshots and core files are saved as log files in a folder under the /var/log/flight_recorder/."
},
{
"name": "disable",
"desc": "Disable flight recorder too... | root
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request flight-recorder set high-cpu (Enable flight-recorder)
user@host> request flight-recorder set high-cpu cpu-threshold 10 polling-frequency 5 backoff-
duration 10 collect-core num-snapshots 1
Plea... | Command introduced in Junos OS Release 18.2R1. | [
"request forwarding-options port-mirroring instance family self-mirror-"
] | |
start | request forwarding-options port-mirroring instance instance-name <family family-name> self-
mirror-start start-duration-seconds | Start the on-device packet capture (self-mirroring) of network packets to the CPU and to PCAP files. | [
{
"name": "family family-name",
"desc": "(Optional) Protocol family to which this command is applied."
},
{
"name": "instance instance-name",
"desc": "Port-mirroring instance to which this command is applied."
},
{
"name": "self-mirror-start start-duration-seconds",
"desc": "Duration... | maintenance
Output Fields
When you enter this command, you are provided no feedback on the status of your request. You can
enter the show forwarding-options port-mirroring self-mirror start command to verify the operation.
Sample Output
request forwarding-options port-mirroring instance I1 family inet self-mirror-start... | Command introduced in Junos OS Evolved Release 24.2R1.
request forwarding-options port-mirroring instance family self-mirror- | [] | |
stop | request forwarding-options port-mirroring instance instance-name <family family-name> self-
mirror-stop | Stop the on-device packet capture (self-mirroring) of network packets to the CPU and to PCAP files. | [
{
"name": "family family-name",
"desc": "(Optional) Protocol family to which this command is applied."
},
{
"name": "instance instance-name",
"desc": "Port-mirroring instance to which this command is applied."
}
] | maintenance
Output Fields
When you enter this command, you are provided no feedback on the status of your request. You can
enter the show forwarding-options port-mirroring self-mirror stop command to verify the operation.
Sample Output
request forwarding-options port-mirroring instance I1 family inet self-mirror-stop
... | Command introduced in Junos OS Evolved Release 24.2R1. | [] | |
request interface (revert | switchover) (Adaptive Services) | request interface (revert | switchover) (rspnumber | rlsqnumber) | (M Series and T Series routers only) Manually revert to the primary adaptive services interface or link
services IQ interface, or to switch from the primary to the secondary interface.
NOTE: All rlsq switchover or revert operations are allowed from the rlsqnumber level
only and not for individual channelized interfaces... | [
{
"name": "(revert | switchover)",
"desc": "The revert keyword restores active processing to the primary adaptive services (sp) or link services IQ (lsq) interface. The switchover keyword transfers active processing to the secondary (backup) interface."
},
{
"name": "rspnumber",
"desc": "Redunda... | view
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request interface revert
user@host> request interface revert rlsq0
request succeeded
request interface switchover
user@host> request interface switchover rlsq0
error: rlsq0: already on secondary | Command introduced before Junos OS Release 7.4.
Support for rlsq interfaces added in Junos OS Release 7.6.
request interface (revert | switchover) (Aggregated Ethernet Link | [] | |
Protection) | request interface (revert | switchover) aex | Manually revert egress traffic from the designated backup link to the designated primary link of an
aggregated Ethernet interface for which link protection is enabled, or manually switch egress traffic from
the primary link to the backup link. This traffic includes transit traffic and local traffic originated on the
r... | [
{
"name": "revert",
"desc": "Restores egress traffic processing to the primary link."
},
{
"name": "switchover",
"desc": "Transfers egress traffic processing to the secondary (backup) link."
},
{
"name": "aex",
"desc": "Aggregated Ethernet logical interface number: 0 through 15."
}... | view
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request interface revert
user@host >request interface revert ae1 | Command introduced in Junos OS Release 8.3.
request interface (revert | switchover) (Aggregated Inline Service | [] | |
Interfaces) | request interface (revert | switchover) bundle-name | Manually revert L2TP data traffic from the designated backup link to the designated primary link of an
aggregated inline service interface bundle interface for which 1:1 redundancy is configured, or manually
switch data traffic from the primary link to the backup link.
NOTE: When 1:1 redundancy protection is configured... | [
{
"name": "revert",
"desc": "Restore data traffic for the LNS session to the primary link."
},
{
"name": "switchover",
"desc": "Transfer data traffic for the LNS session to the secondary (backup) link."
},
{
"name": "bundle-name",
"desc": "Name of the aggregated inline service interf... | view
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request interface switchover
user@host >request interface switchover asi0
error: requesting cmd SWITCH when primary is not active
Sample Output
request interface revert
user@host >request interface rev... | Command introduced in Junos OS Release 16.2. | [] | |
request interface bounce | You can shut down the interface for a given time interval. The interface powers up at the end of the
configured time. | [
{
"name": "poe",
"desc": "An optional parameter that bounces the poe port. The time interval range is from 1 to 60 seconds. An example of the syntax with poe is shown: request interface bounce interface_name poe interval seconds NOTE: You can only bounce poe on ports that have been configured for poe."
},... | View
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Outputs
request interface bounce
user@host> request interface bounce et-0/0/0 interval 20
Bounce operation on interface et-0/0/0 started with interval 20 secs.
request interface bounce with remote-only
user@... | Starting in 24.2 R1 release, we've introduced the poe optional parameter. This statement was originally
introduced in Junos OS release and Junos OS Evolved release 23.4R1. | [] | ||
request interface link-degrade-recover | request interface link-degrade-recover interfaces-name | Manually recover a degraded physical link. Manual recovery is used when the interface has any Layer 2
and Layer 3 protocols that prevents autorecovery. This command is applicable only if you have
configured the manual link recovery option on the interface.
NOTE: Manual recovery option is recommended for user deployment... | [
{
"name": "interfaces-name",
"desc": "Name of the interface."
}
] | View
Output Fields
When you enter this command, Junos OS displays the status of your request.
Sample Output
Manual recovery
user@host>run request interface link-degrade-recover xe-9/1/11
FPC 9 PIC 1 PORT 11 Link Degrade Recovery Started
Interface status when link degrade is enabled
user@host>run show interfaces ... | Command introduced in Junos OS Release 15.1. | [
"Link Degrade Monitoring Overview"
] | |
request interface load-balancing revert (Aggregated Multiservices) | request interface load-balancing revert interface-name | Revert the aggregated multiservices member interface (mams-) from the inactive state to the active or
backup state based on the configuration and the operational state of the aggregated multiservices
interface. | [
{
"name": "interface-name",
"desc": "Name of the member interface. The member interface format is mams-a/b/0, where a is the FPC slot number and b is the PIC slot number."
}
] | view
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request interface load-balancing revert
user@host> request interface load-balancing revert mams-4/0/0
request succeeded | Statement introduced in Junos OS Release 17.1. | [] | |
request interface load-balancing switchover (Aggregated Multiservices) | request interface load-balancing switchover interface-name
<force> | Switch the active member interface to the backup state.
In the case of mobile control plane redundancy, the behavior depends on the replication state of the
member interface:
•
If the sync state is in-sync, then the active member is rebooted and the backup member becomes the
new active member.
•
If the sync-state is in... | [
{
"name": "interface-name",
"desc": "Name of the member interface. The member interface format is mams-a/b/0, where a is the FPC slot number and b is the PIC slot number."
},
{
"name": "force",
"desc": "(Optional) Force the switchover from the active member to the backup member."
}
] | view
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request interface load-balancing switchover force
user@host> request interface load-balancing switchover force mams-4/0/0
Switchover Initiated | Statement introduced in Junos OS Release 17.1. | [] | |
request interface mc-ae switchover (Multichassis Link Aggregation) | request interface mc-ae switchover
<immediate> mcae-id mcae-id;
mcae-id mcae-id; | Manually revert egress traffic from the active node to the designated preferred node of a multichassis
aggregated Ethernet interface. You can use this command to manually switch over traffic to the
preferred node when the switchover-mode statement for the multichassis aggregated Ethernet interface is
configured as non-... | [
{
"name": "immediate",
"desc": "(Optional) Trigger immediate switchover to the preferred node. If this option is not configured, Junos OS waits for the timer configured using the revert-time statement at the [edit interfaces aeX mc-ae] hierarchy level to expire before it triggers the switchover."
},
{
... | view
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request interface mc-ae switchover immediate mcae-id
user@host >request interface mc-ae switchover immediate mcae-id 2
MCAE: Switchover Done
Sample Output
request interface mc-ae switchover mcae-id
us... | Command introduced in Junos OS Release 13.3. | [
"Forcing MC-LAG Links or Interfaces with Limited LACP Capability to Be Up",
"Configuring Manual and Automatic Link Switchover for MC-LAG Interfaces on MX Series Routers"
] | |
request interface optics-reset | request interface optics-reset transceiver-name | Perform manual optics-reset. | [
{
"name": "transceiver-name",
"desc": "Transceiver name. For example:"
},
{
"name": "et-fpc/pic/port",
"desc": ""
},
{
"name": "xcvr-fpc/pic/port",
"desc": ""
}
] | maintenance
Sample Output
request interface optics-reset
user@host> request interface optics-reset xcvr-0/0/0 | Command introduced in Junos OS Evolved Release 23.4R2-S1.
request interface rebalance (Aggregated Ethernet for Subscriber | [] | |
Management) | request interface rebalance interface interface-name | Manually rebalance the subscribers on an aggregated Ethernet bundle with targeted distribution
enabled. For example, when you add a new member link to an existing aggregated Ethernet interface,
you might want to rebalance the subscribers across the new member link. | [
{
"name": "interface-name",
"desc": "Aggregated Ethernet logical interface number. Additional Information The targeted-distribution statement in a dynamic profile automatically distributes subscribers to the aggregated Ethernet links associated with the profile. If you apply the profile and then bring up a ... | view
Output Fields
When you enter this command, you are provided feedback on the status of your request. You can
compare the output of the show interfaces targeting command before and after the request to view the
effect of the rebalancing operation. .
Sample Output
request interface rebalance (Adding a New Link)
user... | Command introduced in Junos OS Release 11.2. | [] | |
request interface revert | request interface revert interface interface-name | Revert from the secondary to the primary interface in the specified warm standby AMS interface. | [
{
"name": "interface interface-name",
"desc": "Name of the AMS interface in which you want to revert from the secondary to the primary interface."
}
] | view
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request interface revert interface
user@host> request interface revert interface ams1 | Statement introduced in Junos OS Release 17.2. | [] | |
request interface switchover | request interface switchover interface interface-name | Switch over from the primary to the secondary (backup) interface in the specified warm standby AMS
interface. If the secondary interface is already in use, then the operation fails. | [
{
"name": "interface interface-name",
"desc": "Name of the AMS interface in which you want to switchover from the primary to the secondary interface."
}
] | view
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request interface switchover interface
user@host> request interface switchover interface ams1 | Statement introduced in Junos OS Release 17.2. | [] | |
request ipsec switch | request ipsec switch (interface <es-fpc/pic/port> | security-associations <sa-name>) | (Encryption interface on M Series, PTX Series, and T Series routers and EX Series switches only)
Manually switch from the primary to the backup encryption services interface, or switch from the
primary to the backup IP Security (IPsec) tunnel. | [
{
"name": "interface <es-fpc/pic/port>",
"desc": "Switch to the backup encryption interface."
},
{
"name": "security-associations <sa-name>",
"desc": "Switch to the backup tunnel."
}
] | view
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request ipsec switch security-associations
user@host> request ipsec switch security-associations sa-private | Command introduced before Junos OS Release 7.4. | [] | |
request jdaf clear statistics service | request jdaf clear statistics service <(cmd | config | firewall | interface | route) client
client-id | server server-id> | Clear Juniper distributed application framework (JDAF) client or server side statistics for either
command, configuration, firewall, interface, or route service. | [
{
"name": "cmd",
"desc": "Clear JDAF command service message statistics."
},
{
"name": "config",
"desc": "Clear JDAF config service message statistics."
},
{
"name": "firewall",
"desc": "Clear JDAF firewall service message statistics."
},
{
"name": "interface",
"desc": "C... | view
Sample Output
request jdaf clear statistics service
user@host> request jdaf clear statistics service cmd client
warning: app-engine-management-service subsystem not running - not needed by configuration. | Command introduced in Junos OS Release 14.2. | [] | |
request jnu role | request jnu role (controller | invoke-on <all-routing-engines | other-routing-engine> | no-
forwarding | satellite) | Perform Junos Node Unifier (JNU) operations such as controller, remote command execution, no
forwarding, and satellite operations. | [
{
"name": "controller",
"desc": "Controller."
},
{
"name": "invoke-on",
"desc": "Remote command execution either on all routing engines or on other routing engine."
},
{
"name": "no-forwarding",
"desc": "No forwarding."
},
{
"name": "satellite",
"desc": "Satellite"
}
] | view
Sample Output
The following commands produce no output.
request jnu role controller invoke-on all-routing-engines
user@host> request jnu role controller invoke-on all-routing-engines
request jnu role no-forwarding controller
user@host> request jnu role no-forwarding controller | Command introduced in Junos OS Release 22.1R1. | [] | |
request jnu satellite sync | request jnu satellite sync | Applicable on JNU satellite in Junos Node Unifier (JNU) topology for Connected Security Distributed
Services (CSDS) Architecture. The command manually synchronizes the JNU satellite with the JNU
controller if the initial automatic synchronization fails. This command also restarts the jnud process on
the satellite. | [] | maintenance
Sample Output
request jnu satellite sync
user@host> request jnu satellite sync
Junos node unifier process started, pid 96869 | Command introduced in Junos OS Release 24.4R1. | [
"Junos Node Unifier for CSDS"
] | |
request jnu schema add | request jnu schema add ( filename filename | model model | version version | Perform Junos Node Unifier (JNU) schema related operations such as adding satellite schema TLV
package files, satellite models, or satellite version. | [
{
"name": "filename",
"desc": "Satellite schema TLV package filename."
},
{
"name": "model",
"desc": "Satellite model"
},
{
"name": "version",
"desc": "Satellite version"
}
] | view
Sample Output
The following command produces no output if the operation is successful. It displays a failure message
such as Satellite Schema creation failed if the operation is unsuccessful.
request jnu schema add
user@host> request jnu schema add model mx240 version 21.1 /root/tunnel_plugin-
x86-64-20220803-0802... | Command introduced in Junos OS Release 22.1R1. | [] | |
request jnu schema delete | request jnu schema delete ( model model | version version | Delete a JNU satellite schema. | [
{
"name": "model",
"desc": "Satellite model"
},
{
"name": "version",
"desc": "Satellite version"
}
] | view
Sample Output
request jnu schema delete
The following command produces no output if the operation is successful. It displays a failure message
such as Satellite Schema deletion failed if the operation is unsuccessful.
user@host> request jnu schema delete model mx240 version 21.1 /root/tunnel_plugin-
x86-64-202208... | Command introduced in Junos OS Release 22.1R1. | [] | |
request jnu schema merge | request jnu schema merge ( conschema | satschema) | Merge JNU schema to the controller. | [
{
"name": "conschema",
"desc": "Controller Schema Path."
},
{
"name": "satschema",
"desc": "Satellite Schema Path."
}
] | view
Sample Output
request jnu schema merge
The following command produces no output if the operation is successful. It displays a failure message
such as Satellite Schema merge failed if the operation is unsuccessful.
user@host> request jnu schema merge | Command introduced in Junos OS Release 22.1R1. | [] | |
request l2circuit-switchover | request l2circuit-switchover
<logical-system (all | logical-system-name)>
<neighbor address>
<virtual-circuit-id identifier> | Manually trigger a switch from the active pseudowire to the redundant pseudowire. This command can
be useful when performing network maintenance. | [
{
"name": "logical-system (all |",
"desc": ""
},
{
"name": "logical-system-name)",
"desc": "(Optional) Perform this operation on all logical systems or on a particular logical system."
},
{
"name": "neighbor address",
"desc": "(Optional) Trigger a switch of all of the active pseudowi... | maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request l2circuit-switchover virtual-circuit-id
user@host>request l2circuit-switchover virtual-circuit-id 12 | Command introduced in Junos OS Release 9.2. | [
"MPLS Feature Support on QFX Series and EX4600 Switches"
] | |
request lacp link-switchover | request lacp link-switchover aex | Manually switch aggregated Ethernet active or standby LACP links.
NOTE: Because this command overrides LACP priority calculations, we strongly
recommend that you use this command only when the actor (in this case, the Juniper
Networks router) is controlling the active or standby link and the partner (peer) is
followin... | [
{
"name": "aex",
"desc": "Aggregated Ethernet logical interface number: 0 through 15."
}
] | view
Output Fields
When you enter this command, you are provided feedback on the status of your request. To view the
switchover, use the show lacp interfaces command.
Sample Output
request lacp link-switchover aeX
user@host >request lacp link-switchover ae0ae0: Request succeeded | Command introduced in Junos OS Release 9.3. | [] | |
request message | request message all message "text"
request message message "text" (terminal terminal-name | user user-name) | Display a message on the screens of all users who are logged in to the router or switch or on specific
screens. | [
{
"name": "all",
"desc": "Display a message on the terminal of all users who are currently logged in."
},
{
"name": "message \"text\"",
"desc": "Message to display."
},
{
"name": "terminal terminal-name",
"desc": "Name of the terminal on which to display the message."
},
{
"n... | maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request message message
user@host> request message message "Maintenance window in 10 minutes" user maria
Message from user@host on ttyp0 at 20:27 ...
Maintenance window in 10 minut... | Command introduced before Junos OS Release 7.4. | [] | |
request modem wireless create-profile | request modem wireless create-profile interface-name access-point-name access-point-name
authentication-method authentication-method profile-id profile-id sip-password sip-password sip-
user-id sip-id slot sim-slot-number | Create a profile. The Subscriber Identity Module (SIM) uses a profile to establish a connection with the
network. You can configure up to 16 profiles for each SIM card. The LTE Mini-PIM supports two SIM
cards and so you can configure a total of 32 profiles, although only one profile can be active at a time.
To create a... | [
{
"name": "interface-name",
"desc": "The LTE interface is cl-x/0/0, where x is the slot number in which the LTE Mini-PIM is"
},
{
"name": "access-point-name access-point-name",
"desc": "Access point name (APN). Obtain the APN from the service"
},
{
"name": "authentication-method",
"d... | maintenance
Sample Output
request modem wireless create-profile
user@host> request modem wireless create-profile cl-1/0/0 access-point-name apn authentication-
method pap profile-id 2 sip-password 123 sip-user-id userid slot 1
Issued create profile request successfully.
Please use 'show modem wireless profiles' to che... | Command introduced in Junos OS 9.5. The slot sim-slot-number option is introduced in Junos OS
15.1X49-D100. | [] | |
request modem wireless fota | request modem wireless fota interface-name (enable | disable) | Enable or disable over-the-air (OTA) firmware upgrade for the modem on the LTE Mini-PIM. OTA
firmware upgrade enables automatic and timely upgrade of modem firmware when new firmware
versions are available. The OTA upgrade can be enabled or disabled on the LTE Mini-PIM. OTA is
disabled by default. | [] | maintenance
Sample Output
request modem wireless fota (enable)
user@host> request modem wireless fota cl-1/0/0 enable
Set FOTA on modem succeeded
request modem wireless fota (disable)
user@host> request modem wireless fota cl-1/0/0 disable
Set FOTA on modem succeeded | Command introduced in Junos OS 15.1X49-D100. | [] | |
request modem wireless sim-lock | request modem wireless sim-lock enable interface-name pin pin | Lock the Subscriber Identity Module (SIM) on the Mini-PIM. The SIM lock does not take effect until the
next reboot of the services gateway. You can verify the locked mode using the show modem wireless firmware
command.
NOTE: If there are two SIMs installed on the LTE Mini-PIM, then only the active SIM is
locked. After ... | [
{
"name": "interface-name",
"desc": "The LTE Mini-PIM is denoted as cl-x/0/0, where x is the slot number in which the LTE"
},
{
"name": "pin pin",
"desc": "Four-digit personal identification number (PIN). Obtain the PIN from the service provider."
}
] | maintenance
Sample Output
request modem wireless sim-lock
user@host> request modem wireless sim-lock enable cl-1/0/0 pin 4321
Issued SIM 2 lock state request successfully.
Please use 'show modem wireless firmware' to check SIM status | Command introduced in Junos OS Release 9.5. | [] | |
request modem wireless sim-unlock | request modem wireless sim-unlock interface-name pin unlock-code | Unlock the Subscriber Identity Module (SIM) on the LTE Mini-PIM. Some service providers lock the SIM
to prevent unauthorized access to the service provider's network. If this is the case, you will need to
unlock the SIM by using an personal identification number (PIN), which is provided by the service
provider. You can... | [
{
"name": "interface-name",
"desc": "The LTE interface is denoted as cl-x/0/0, where x is the slot number in which the LTE"
},
{
"name": "pin unlock-code",
"desc": "Four-digit personal identification number (PIN). Obtain the PIN from the service"
}
] | maintenance
Sample Output
request modem wireless sim-unlock
user@host> request modem wireless sim-unlock cl-1/0/0 pin 1234
Issued SIM 2 unlock request successfully.
Please use 'show modem wireless firmware' to check SIM status | Command introduced in Junos OS Release 9.5. | [] | |
request mpls container-lsp | request mpls container-lsp
<logical-system (all | logical-system-name)>
<name lsp-name>
<adjust-autobandwidth>
<normalization> | Manually trigger a bandwidth allocation adjustment for the container label-switched path (LSP). | [
{
"name": "none",
"desc": "Manually trigger a bandwidth allocation adjustment for all active member LSP paths."
},
{
"name": "logical-system (all | logical-system-name)",
"desc": "(Optional) Perform this operation on all logical systems or on a particular logical system."
},
{
"name": "n... | clear, maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request mpls container-lsp
user@host> request mpls container-lsp lsp-name normalize
request mpls container-lsp
user@host> request mpls container-lsp normalize bandwidth bps | Command introduced in Junos OS Release 14.2.
Statement introduced for QFX Switches in Junos OS Release 15.1X53-D30. | [] | |
request mpls lsp adjust-autobandwidth | request mpls lsp adjust-autobandwidth
<name lsp-name> | Manually trigger a bandwidth allocation adjustment for active label-switched paths (LSPs).
Without running this command, the bandwidth adjustment is recomputed at a configurable interval. The
default interval is 5 minutes. If you do not want to wait for the periodic adjustment (for example, during
a software demonstrat... | [
{
"name": "none",
"desc": "Manually trigger a bandwidth allocation adjustment for all active LSP paths."
},
{
"name": "logical-system (all |",
"desc": ""
},
{
"name": "logical-system-name)",
"desc": "(Optional) Perform this operation on all logical systems or on a particular logical ... | clear, maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request mpls lsp adjust-auto-bandwidth
user@host> request mpls lsp adjust-auto-bandwidth | Statement introduced before Junos OS Release 7.4. | [
"Configuring Automatic Bandwidth Allocation for LSPs"
] | |
request network-access aaa accounting | request network-access aaa accounting (baseline | suspend | resume) | Suspend accounting processes; determine a baseline of the statistical details while accounting is
suspended; and restart accounting operations after baselining is completed. This command is useful in
service provider environments when an upgrade of the server infrastructure is critical and needed
immediately. RADIUS Ac... | [
{
"name": "baseline",
"desc": "(Optional) Determine a baseline of accounting statistics for current subscriber sessions. Applies to only those subscribers for which interim accounting is configured. The router implements the baseline by reading and storing the statistics at the time the baseline is set and ... | view
Sample Output
request network-access aaa accounting suspend
user@host> request network-access aaa accounting suspend
request network-access aaa accounting baseline
user@host> request network-access aaa accounting baseline
request network-access aaa accounting resume
user@host> request network-access aaa accountin... | Command introduced in Junos OS Release 14.2R1. | [
"RADIUS Accounting for Subscriber Access",
"RADIUS Accounting for Subscriber Access"
] | |
request network-access aaa replay pending-accounting-stops | request network-access aaa replay pending-accounting-stops | Force the router to attempt contact with the accounting sever immediately, rather than allowing it to
wait until the periodic interval has expired. | [] | view
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request network-access aaa replay pending-accounting-stops
user@host> request network-access aaa replay pending-accounting-stops
replay started | Command introduced in Junos OS Release 13.1. | [
"RADIUS Accounting for Subscriber Access"
] | |
request network-access aaa saml export-sp-metadata | request network-access aaa saml export-sp-metadata access-profile-name access-profile-name | Export Security Assertion Markup Language (SAML) authentication service provider metadata to a file. | [
{
"name": "access-profile-name access-profile-name",
"desc": "Exports service provider configuration metadata to /var/tmp/access-profile-name.xml"
}
] | maintenance | Command introduced in Junos OS Release 24.4R1. | [] | |
request network-access aaa saml load-idp-metadata | request network-access aaa saml load-idp-metadata
<filename filename>
<metadata-id metadata-id> | Load Security Assertion Markup Language (SAML) authentication identity provider (IdP) metadata
details. | [
{
"name": "filename",
"desc": ""
},
{
"name": "filename",
"desc": "Provide filename along with the absolute path to load identity provider (IdP) metadata details such as /var/tmp/filename.xml."
},
{
"name": "metadata-id metadata-id",
"desc": "Provide metadata identifier of the identi... | maintenance | Command introduced in Junos OS Release 24.4R1. | [] | |
request network-access aaa subscriber add session-id | request network-access aaa subscriber add session-id subscriber-session-id service-profile
profile-name | Corrective Action
Provisioning is already active
Remote provisioning by a JSRC
server or Gx-plus server is active.
–
Service activation/deactivation
already in progress
Another service activation/
deactivation operation is currently
in progress.
Wait until the active operation completes
and then retry the activation/
d... | [
{
"name": "profile-name",
"desc": "Name of service-profile to activate."
},
{
"name": "subscriber-session-id",
"desc": "ID of the subscriber session for which the service will be added."
}
] | view
Output Fields
When you enter this command, you are provided feedback on the status of your request. Table 133 on
page 15250 lists possible error messages that might be returned if the service activation fails.
Table 133: Service Activation/Deactivation Error Messages
Message | Command introduced in Junos OS Release 11.2. | [
"CLI-Activated Subscriber Services",
"Local and Remote Service Activation and Deactivation Using the CLI"
] |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.