model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
961659 | Single Piece Multi-Directional Cable Chain | <p>I have used various cable chains on my printer, but over time I wanted something simpler. So I designed this octagonal cable chain to solve all my problems!</p><ul><li>Each chain link is one piece (no covers to snap on!)</li><li>No supports are required to print</li><li>Links can be rotated to create bends or change... | [
"cable",
"chain",
"cablemanagement",
"orgainization",
"dragchain"
] | 3D Printers > Other Printer Parts & Upgrades | [
"961659/images/image_1_compressed.jpg",
"961659/images/image_2_compressed.jpg",
"961659/images/image_3_compressed.jpg",
"961659/images/image_4_compressed.jpg"
] | [
"961659/stls/CableChain.stl"
] | GPL3.0 | https://www.printables.com/model/961659 | data_0032.tar |
244668 | Single piece slim wallet for cards, bills and coins | <p>I really wanted to have to slimmest possible wallet for holding the few things I need:</p><ul><li>3 cards (public transportation pass, public healthcare card, and my <i>Curve</i> card combining all my debit/credit cards in one)</li><li>one or two bills</li><li>few coins</li></ul><p>I looked around, tried printing so... | [
"coins",
"wallet",
"cards",
"cardholder",
"singleprint",
"slimwallet",
"bills"
] | Fashion > Other Fashion Accessories | [
"244668/images/image_1_compressed.jpg",
"244668/images/image_2_compressed.jpg",
"244668/images/image_3_compressed.jpg",
"244668/images/image_4_compressed.jpg",
"244668/images/image_5_compressed.jpg"
] | [
"244668/stls/Slim wallet v5.stl"
] | GPL2.0 | https://www.printables.com/model/244668 | data_0032.tar |
773948 | Single Scissor Holder for Gridfinity | The original model was a bit too tight to fit my (fiskar) scissors. I also didn't need 2 slots.
Modified for a slightly wider single slot. | [
"organizer",
"scissors",
"fiskars",
"gridfinity"
] | Hobby & Makers > Organizers | [
"773948/images/image_1_compressed.jpg"
] | [
"773948/stls/Gridfinity_Scissor_holder_single v1.stl"
] | CC-BY | https://www.printables.com/model/773948 | data_0032.tar |
519780 | Single Screw Cable Management Clip | <p>A wire management clip that's durable and easy to install. Wires are easily removable without messing with hook-and-loop strips. Mounts with a single flat screw.</p>
<p>I used this for managing cables under my desk.</p>
Category: Organization | [
"clip",
"screw",
"cablemanagement",
"thingiverse",
"cableholder",
"cableclip",
"cableguide",
"cableorganizer"
] | Household > Office | [
"519780/images/image_1_compressed.jpg",
"519780/images/image_2_compressed.jpg",
"519780/images/image_3_compressed.jpg",
"519780/images/image_4_compressed.jpg"
] | [
"519780/stls/clip.stl"
] | CC-BY | https://www.printables.com/model/519780 | data_0032.tar |
1113924 | Single Screw Sawtooth Hook (saw tooth wall frame hanger) | <p>Recommended printing settings (or download gcode): </p><ul><li>Infill: 80%+ </li><li>Brim = enabled</li><li>Supports = Everywhere</li><li>Orientation: see image </li></ul><p><img src="https://media.printables.com/media/prints/1113924/rich_content/75e78b7e-2ce0-450c-9d85-771b1fc17297/image.png#%7B%22uu... | [
"sawtooth",
"hookmount"
] | Art & Design > Wall-mounted | [
"1113924/images/image_1_compressed.jpg",
"1113924/images/image_2_compressed.jpg"
] | [
"1113924/stls/Sawtooth frame hook.stl"
] | CC0 | https://www.printables.com/model/1113924 | data_0032.tar |
439904 | Single Spool Filament Guide | <p>There's separate left and right versions depending on what side you have your filament spool on.</p><p>EDIT: I had the model names backwards, whoops.</p> | [
"prusa",
"mk3",
"spoolholder",
"mk3s",
"filamentguide"
] | 3D Printers > Other Printer Parts & Upgrades | [
"439904/images/image_1_compressed.jpg"
] | [
"439904/stls/filament guide left.stl",
"439904/stls/filament guide right.stl"
] | GPL2.0 | https://www.printables.com/model/439904 | data_0032.tar |
1236396 | Single Wheel Nextruder Idler Lever for Brittle Filaments | <p><strong>General</strong></p><p>When printing particulary brittle filaments like PET-CF the two idler wheels on the Nextruder can intruduce too tight bending radii and inturn break the filament.</p><p>This is a Drop-in replacement for Nextruder idler lever. Based on the one from the MK4/MK3.9 printable parts with the... | [
"pet",
"mk4",
"cf",
"brittle",
"nextruder",
"brittlefilament",
"mk4s",
"coreone",
"petcf"
] | 3D Printers > Prusa Parts & Upgrades | [
"1236396/images/image_1_compressed.jpg",
"1236396/images/image_2_compressed.jpg",
"1236396/images/image_3_compressed.jpg",
"1236396/images/image_4_compressed.jpg",
"1236396/images/image_5_compressed.jpg",
"1236396/images/image_6_compressed.jpg"
] | [] | GPL2.0 | https://www.printables.com/model/1236396 | data_0032.tar |
125291 | Single-Hand Key Organizer | <p>A lightweight Key Organzier:</p><ul><li><strong>Prevent key scratches</strong> on your phone or wallet</li><li>Easy to <strong>use with one hand</strong>: push keys out with index finger and select the key you need. Perfect when carrying stuff.</li><li><strong>Customizable in slicer</strong> to fit your amount of ke... | [
"organizer",
"ring",
"transport",
"wallet",
"home",
"key",
"keyring",
"keys",
"house",
"outside",
"onehanded",
"keyorganizer",
"antiscratch"
] | Fashion > Other Fashion Accessories | [
"125291/images/image_1_compressed.jpg",
"125291/images/image_10_compressed.jpg",
"125291/images/image_2_compressed.jpg",
"125291/images/image_3_compressed.jpg",
"125291/images/image_4_compressed.jpg",
"125291/images/image_5_compressed.jpg",
"125291/images/image_6_compressed.jpg",
"125291/images/image_... | [
"125291/stls/key_organiser_v3.stl",
"125291/stls/key_organizer_doublesided_w_nut.stl",
"125291/stls/key_organizer_doublesided_w_screw.stl",
"125291/stls/key_organizer_half_w_nut.stl",
"125291/stls/key_organizer_half_w_nut_ringhole.stl",
"125291/stls/key_organizer_half_w_screw.stl",
"125291/stls/key_orga... | CC-BY | https://www.printables.com/model/125291 | data_0032.tar |
144210 | Single-Hand Key Organizer with heat inserts. | <p>I really liked basti30 simple implementation of the key orgnizer and I had extra heat inserts so decided to use them. </p><p>the heat inserts I used are M3x5x4mm:</p><p><a href="https://nl.aliexpress.com/item/4000232858343.html?gatewayAdapt=glo2nld&spm=a2g0s.9042311.0.0.21164c4dGhWHhY">https://nl.aliexpress... | [] | Fashion > Other Fashion Accessories | [
"144210/images/image_1_compressed.jpg",
"144210/images/image_2_compressed.jpg",
"144210/images/image_3_compressed.jpg",
"144210/images/image_4_compressed.jpg"
] | [
"144210/stls/bottom m3 screw.stl",
"144210/stls/key_organiser_v4.stl",
"144210/stls/spacer 10mm.stl",
"144210/stls/top with heat inserts.stl"
] | CC0 | https://www.printables.com/model/144210 | data_0032.tar |
5954 | Single-reel spool holder for Prusa Printer Enclosure V2 | <p>Modification of 5-reel spool holder on Prusa Printer Enclosure v2 to just one reel, for users who want the V2 enclosure but don't have the MMU system installed.</p>
<p>This is a modification of the spool holder in the V2 enclosure files (available at <a href="https://www.printables.com/model/3673-mmu2s-enclosure">ht... | [
"spoolholder",
"spoolmount"
] | 3D Printers > Prusa Parts & Upgrades | [
"5954/images/image_1_compressed.jpg",
"5954/images/image_2_compressed.jpg",
"5954/images/image_3_compressed.jpg"
] | [
"5954/stls/prusa-lack-enclosure-v2-single-reel-spool.stl"
] | GPL2.0 | https://www.printables.com/model/5954 | data_0032.tar |
625977 | single-use glove box holder assortment | <p>There are many files for multiple sizes from 115*55mm to 130*95mm.<br>This version has no holes, you can use double sided tape to mount it to the wall.</p> | [
"minimal",
"wallmount",
"nosupport",
"organizers",
"gloves"
] | Hobby & Makers > Organizers | [
"625977/images/image_1_compressed.jpg"
] | [
"625977/stls/115 55.stl",
"625977/stls/115 65.stl",
"625977/stls/115 75.stl",
"625977/stls/115 85.stl",
"625977/stls/115 95.stl",
"625977/stls/120 55.stl",
"625977/stls/120 65.stl",
"625977/stls/120 75.stl",
"625977/stls/120 85.stl",
"625977/stls/120 95.stl",
"625977/stls/125 55.stl",
"625977/... | CC0 | https://www.printables.com/model/625977 | data_0032.tar |
144825 | Single/double ID Card holder - horizontal, no supports | <p>Simple/robust card holder for credit-card sized badges in regular and "double card" versions.</p>
<p>This is another remix of the great <a href="https://www.thingiverse.com/thing:2746205">card holder by Jori</a> which prints without supports.</p>
<p>These badge holders are the most requested/printed thing in our lab... | [
"badge",
"cardholder",
"thingiverse",
"badgeholder"
] | Household > Office | [
"144825/images/image_1_compressed.jpg",
"144825/images/image_2_compressed.jpg",
"144825/images/image_3_compressed.jpg"
] | [
"144825/stls/dual_id_card_holder.stl",
"144825/stls/id_card_holder.stl"
] | CC-BY | https://www.printables.com/model/144825 | data_0032.tar |
69353 | Sink Caddy with Self Drain and Adjustable Divider | <h3> A flexible Sink Caddy for your indoor or outdoor sink.</h3>
<p>Dimensions (with lower cup): L:180mm; W:92mm; H:135mm</p>
<h3> Features</h3>
<ul>
<li>Store your soap; sponges and brushes in a flexible configuration.</li>
<li>Divider allows for 1/2 split or 1/3-2/3 split. More if you print a second divider.</li>
<li... | [
"organizer",
"sink",
"soap",
"sponge",
"clean",
"caddy",
"thingiverse",
"soapholder",
"wash",
"spongeholder",
"soapdish",
"bathroomsink",
"kitchensink",
"washing",
"soaptray",
"dishes",
"soapdishholder",
"detergent",
"cleandishes",
"dirtydishes",
"spongedrainer",
"utilitysi... | Household > Kitchen | [
"69353/images/image_1_compressed.jpg",
"69353/images/image_10_compressed.jpg",
"69353/images/image_11_compressed.jpg",
"69353/images/image_12_compressed.jpg",
"69353/images/image_13_compressed.jpg",
"69353/images/image_2_compressed.jpg",
"69353/images/image_3_compressed.jpg",
"69353/images/image_4_com... | [
"69353/stls/Divider.stl",
"69353/stls/LowerCupWSpout.stl",
"69353/stls/Main_Body.stl"
] | CC-BY | https://www.printables.com/model/69353 | data_0032.tar |
626649 | Sink drain clog remover/cleaner | <p>A simple clog remover for a sink drain.</p>
<p>About 27cm</p>
Category: Bathroom | [
"bathroom",
"sink",
"drain",
"thingiverse",
"clog"
] | Household > Bathroom | [
"626649/images/image_1_compressed.jpg",
"626649/images/image_2_compressed.jpg"
] | [
"626649/stls/sink-drain-clog-remover-v1.0.stl"
] | GPL2.0 | https://www.printables.com/model/626649 | data_0032.tar |
57162 | Sink drain sieve/filter | <p>Should fit into a drain of around 50mm in diameter.</p><p><br>The print is split into 2 parts in order to print cleanly without supports. I experimented with snap fit design, it takes some fiddling to put the two pieces together but it works better than i expected.<br><br>I printed it at 0.1mm layer height in Prusam... | [
"filter",
"drain"
] | Household > Kitchen | [
"57162/images/image_1_compressed.jpg",
"57162/images/image_2_compressed.jpg",
"57162/images/image_3_compressed.jpg"
] | [
"57162/stls/in_body.stl",
"57162/stls/out_ring.stl"
] | CC-BY | https://www.printables.com/model/57162 | data_0032.tar |
1409181 | Sink Drain Strainer | <p>Fits 70mm drains, allows for good flow even when partially blocked.<br><br>Should be printed with heat resistant filaments if its going to be exposed to boiling water, I found that PETG and ASA will warp, while PC is able to resist warping with boiling water being poured over it.<br><br>Must be printed with supports... | [
"filter",
"sink",
"drain",
"strainer"
] | Household > Kitchen | [
"1409181/images/image_1_compressed.jpg",
"1409181/images/image_2_compressed.jpg",
"1409181/images/image_3_compressed.jpg",
"1409181/images/image_4_compressed.jpg",
"1409181/images/image_5_compressed.jpg"
] | [
"1409181/stls/Sink drain strainer.stl"
] | CC-BY | https://www.printables.com/model/1409181 | data_0032.tar |
1247554 | sink hole cover | <p>For 80 mm diameter sink holes, scale on the slicer for different dimensions </p><figure class="image"><img src="https://media.printables.com/media/prints/1247554/rich_content/b15362af-626b-4045-be76-d0697c39aedf/image.png#%7B%22uuid%22%3A%22d4c3b623-5df0-44ee-a352-546449af42dc%22%2C%22w%22%3A1933%2C%22h%22%3A92... | [
"kitchen",
"water",
"sink",
"cocina",
"sinkhole",
"cucina",
"eau",
"fregadero",
"sinkholecover"
] | Household > Kitchen | [
"1247554/images/image_1_compressed.jpg",
"1247554/images/image_2_compressed.jpg"
] | [
"1247554/stls/cover honeycomb slicer.stl",
"1247554/stls/cover with slots.stl"
] | CC0 | https://www.printables.com/model/1247554 | data_0032.tar |
460580 | Sink overflow cover | <p>Covers the overflow hole in my bathroom sink (hole is: 23mm diameter, 8mm thick wall). Printed in PETG</p> | [
"cover",
"sink",
"overflow"
] | Household > Bathroom | [
"460580/images/image_1_compressed.jpg",
"460580/images/image_2_compressed.jpg"
] | [
"460580/stls/Tappi_yfirfallsgat_vaska-Body.stl"
] | CC-BY | https://www.printables.com/model/460580 | data_0032.tar |
772093 | Sink Overflow Ring | This is a replacement part for a bathroom sink overflow ring. It was originally made out of plastic with silver paint | Download free 3D printable STL models | [
"ring",
"replacement",
"bathroom",
"sink",
"overflow"
] | Household > Bathroom | [
"772093/images/image_1_compressed.jpg"
] | [
"772093/stls/Overflow Ring.stl"
] | CC-BY | https://www.printables.com/model/772093 | data_0032.tar |
197927 | Sink plug ⌀40.5 | <p>Flexible material is recommended.</p><h3>Dimensions</h3><figure class="table" style="float:left;width:320px;"><table><thead><tr><th style="width:150px;"> </th><th style="width:150px;">[mm]</th></tr></thead><tbody><tr><th style="width:150px;">d1</th><td style="width:150px;">40.5</td></tr><tr><th style="width:150... | [
"kitchen",
"bathtub",
"plug",
"bathroom",
"shower",
"kitchensink",
"sinkplug"
] | Household > Kitchen | [
"197927/images/image_1_compressed.jpg",
"197927/images/image_2_compressed.jpg"
] | [
"197927/stls/sink_plug_dia40.5.stl"
] | CC-BY | https://www.printables.com/model/197927 | data_0032.tar |
208497 | Sink/shower drain cleaner | <p>Nothing special, another barbed drain cleaner i designed one day i needed one and didn't want to use one from the internet</p><p>Should be able to be scaled in slicer in case you need it longer, thicker/thinner or wider<br><br>I recommend printing it in PETG, as it's fairly flexible but not brittle as PLA</p> | [
"sink",
"drain",
"shower",
"cleaner"
] | Household > Bathroom | [
"208497/images/image_1_compressed.jpg"
] | [
"208497/stls/drain cleaner.stl"
] | CC-BY | https://www.printables.com/model/208497 | data_0032.tar |
1030285 | Sipeed NanoKVM Lite enclosure | <p>2parts, held together by four M3 10mm screws and nuts.</p><p>no supports needed.</p><p>OpenSCAD source available.</p><p>New : Optional top that houses 4x4x4mm NdFeB magnets. Even half-populated it will stick to any metal case (just be aware of magnetic storage incompatibilities).</p> | [
"openscad",
"kvm",
"sipeed",
"nanokvm"
] | Gadgets > Computers | [
"1030285/images/image_1_compressed.jpg",
"1030285/images/image_2_compressed.jpg",
"1030285/images/image_3_compressed.jpg",
"1030285/images/image_4_compressed.jpg",
"1030285/images/image_5_compressed.jpg"
] | [
"1030285/stls/NanoKVM_004-top.stl",
"1030285/stls/NanoKVM_004.stl",
"1030285/stls/NanoKVM_006-bottom.stl",
"1030285/stls/NanoKVM_006-magnet-top.stl"
] | CC-BY | https://www.printables.com/model/1030285 | data_0032.tar |
1032391 | Sipeed NanoKVM Lite Case | <p>The housing consists of two parts. The cap is snap-in. The HDMI and USB-C ports are easily accessible and not recessed into the housing.</p><p>The housing has a cutout that allows access to the microSD card without disassembly and holes for observing the diodes</p><p>It is best to mount the NanoKVM without the card ... | [
"case",
"kvm",
"nanokvm",
"nanokvmlite"
] | Gadgets > Computers | [
"1032391/images/image_1_compressed.jpg",
"1032391/images/image_2_compressed.jpg",
"1032391/images/image_3_compressed.jpg"
] | [
"1032391/stls/NanoKVM-body (24mm).stl",
"1032391/stls/NanoKVM-body (Dupont).stl",
"1032391/stls/NanoKVM-cap (24mm).stl",
"1032391/stls/NanoKVM-cap (Dupont).stl",
"1032391/stls/NanoKVM_body.stl",
"1032391/stls/NanoKVM_body_v1.1.stl",
"1032391/stls/NanoKVM_cap.stl"
] | CC-BY | https://www.printables.com/model/1032391 | data_0032.tar |
80282 | Sir Layersalot |
<p>Introducing Sir Layersalot! With the mighty sword ExCalibration, he leads the Knights of the Level Table.</p>
<p>This mascot for <a href="http://www.printedsolid.com">Printed Solid</a> was commissioned from the talented Carmelo Nazario (<a href="http://patreon.com/thecreatorx3d">http://patreon.com/thecreatorx3d</... | [
"thingiverse"
] | Art & Design > Sculptures | [
"80282/images/image_1_compressed.jpg",
"80282/images/image_2_compressed.jpg",
"80282/images/image_3_compressed.jpg",
"80282/images/image_4_compressed.jpg",
"80282/images/image_5_compressed.jpg",
"80282/images/image_6_compressed.jpg",
"80282/images/image_7_compressed.jpg"
] | [
"80282/stls/SirLayersalot.stl"
] | CC-BY | https://www.printables.com/model/80282 | data_0032.tar |
919309 | Sir Nutsalot the Squirrel Paladin | <p>Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs!</p><p>Patrons have access to all my files in one place, a request board, as well ... | [
"paladin",
"squirrel"
] | Tabletop Miniatures > Characters & Monsters | [
"919309/images/image_1_compressed.jpg",
"919309/images/image_2_compressed.jpg",
"919309/images/image_3_compressed.jpg"
] | [
"919309/stls/Sir Nutsalot the Squirrel Paladin presupported.stl",
"919309/stls/Sir Nutsalot the Squirrel Paladin.stl"
] | CC-BY | https://www.printables.com/model/919309 | data_0032.tar |
158188 | Site Fence | <p>You can find a fitting trailer <a href="https://www.printables.com/de/model/158195-construction-trailer">here</a>. </p><p> </p> | [
"fence",
"constructiontoys",
"sitefence",
"bauzaun"
] | Toys & Games > Building Toys | [
"158188/images/image_1_compressed.jpg",
"158188/images/image_2_compressed.jpg"
] | [
"158188/stls/Foot Plate No Nuts.stl",
"158188/stls/Foot Plate.stl",
"158188/stls/Site Fence.stl"
] | CC-BY | https://www.printables.com/model/158188 | data_0032.tar |
220715 | Sitting cockatiel |
<p>Sculpt is based off of my pet cockatiel when she fluffs herself up. File is scaled to be the actual size of a cockatiel, feel free to adjust the sizing if you wish.</p>
<h3>Print Settings</h3>
<p><strong>Printer:</strong></p>
<p>Fusion 3 F410</p>
<p class="detail-setting rafts"><strong>Rafts: </strong>
<div><p>No... | [
"bird",
"animal",
"zbrush",
"sculpture",
"animals",
"blender",
"birds",
"thingiverse",
"parrot",
"avian",
"miniture",
"parrots",
"cockatiel"
] | World & Scans > Animals | [
"220715/images/image_1_compressed.jpg",
"220715/images/image_2_compressed.jpg",
"220715/images/image_3_compressed.jpg",
"220715/images/image_4_compressed.jpg"
] | [
"220715/stls/KaiCockatiel.stl"
] | CC-BY | https://www.printables.com/model/220715 | data_0032.tar |
220718 | Sitting Crow | <p>Sculpture of a sitting crow. I was inspired to create more sitting bird statues to create a flock of various bird species. The statue was based off photos of baby and young crows in a sitting position.</p>
<p>For higher detail, I recommend printing at a .1mm layer height. The model should print fine at other resolut... | [
"bird",
"crow",
"animal",
"figurine",
"figure",
"sculpture",
"miniature",
"animals",
"raven",
"thingiverse",
"nature"
] | World & Scans > Animals | [
"220718/images/image_1_compressed.jpg",
"220718/images/image_2_compressed.jpg",
"220718/images/image_3_compressed.jpg",
"220718/images/image_4_compressed.jpg",
"220718/images/image_5_compressed.jpg"
] | [
"220718/stls/SittingCrow.stl"
] | CC-BY | https://www.printables.com/model/220718 | data_0032.tar |
44749 | sitting kodama mix | <p>made some kodamas.<br>they probably need a bit of support, at least for the arms. but i dunno.<br>the picture only shows #0 and #2</p> | [
"ghibli",
"mononoke"
] | Art & Design > Sculptures | [
"44749/images/image_1_compressed.jpg",
"44749/images/image_2_compressed.jpg"
] | [
"44749/stls/kodama_4_0.stl",
"44749/stls/kodama_4_0_rattle.stl",
"44749/stls/kodama_4_1.stl",
"44749/stls/kodama_4_1_rattle.stl",
"44749/stls/kodama_4_2.stl",
"44749/stls/kodama_4_2_rattle.stl"
] | CC-BY | https://www.printables.com/model/44749 | data_0032.tar |
590888 | Sitting Potato | <p>A sitting potato.</p> | [
"sitting",
"statue",
"potato",
"pokerface"
] | Art & Design > Sculptures | [
"590888/images/image_1_compressed.jpg"
] | [
"590888/stls/potato.stl"
] | GPL3.0 | https://www.printables.com/model/590888 | data_0032.tar |
1207033 | Sitting Rabbit | <p>This is a simple rabbit that scales nicely.</p><p> </p><p> </p><p>Like it? <a href="https://buymeacoffee.com/bbprintsthings">https://buymeacoffee.com/bbprintsthings</a></p><p>Also visit <a href="https://www.youtube.com/channel/UCSUnIM-tBsBxw7vWHDVkTgw">https://www.youtube.com/channel/UCSUnIM-tBsBxw7v... | [
"rabbit"
] | Seasonal designs > Spring & Easter | [
"1207033/images/image_1_compressed.jpg",
"1207033/images/image_2_compressed.jpg",
"1207033/images/image_3_compressed.jpg",
"1207033/images/image_4_compressed.jpg"
] | [
"1207033/stls/SittingRabbit.stl"
] | CC-BY | https://www.printables.com/model/1207033 | data_0032.tar |
1297609 | Sitting realistic cat figure | <p>Sitting realistic cat figure</p> | [
"statue",
"cat",
"animal",
"figure"
] | Toys & Games > Action Figures & Statues | [
"1297609/images/image_1_compressed.jpg",
"1297609/images/image_2_compressed.jpg"
] | [
"1297609/stls/sitting_cat.stl"
] | CC0 | https://www.printables.com/model/1297609 | data_0032.tar |
220717 | Sitting Sparrow | <p>2/17/2026:<br>Added a more print friendly version of the file. Refined some details on the newer ones as well.</p><p></p><p>Sitting sparrow figurine. The sculpt is based on fluffed up and sitting house sparrows. The model can also represent similar looking bird species such as finches and other songbirds. I scaled i... | [
"bird",
"statue",
"animal",
"figurine",
"figure",
"sculpture",
"miniature",
"birds",
"thingiverse",
"feather",
"sparrow",
"avian",
"housesparrow"
] | World & Scans > Animals | [
"220717/images/image_1_compressed.jpg",
"220717/images/image_2_compressed.jpg",
"220717/images/image_3_compressed.jpg",
"220717/images/image_4_compressed.jpg",
"220717/images/image_5_compressed.jpg",
"220717/images/image_6_compressed.jpg"
] | [
"220717/stls/FatSparrow1.stl",
"220717/stls/FatSparrow2.stl",
"220717/stls/SparrowFigure.stl"
] | CC-BY | https://www.printables.com/model/220717 | data_0032.tar |
46159 | Sitting Suprised Pony | <p>A tiny pony.<br/>
Based on the drawing by MidnightPremiere: <a href="https://www.deviantart.com/midnightpremiere/art/When-You-Least-Expect-It-479969625">https://www.deviantart.com/midnightpremiere/art/When-You-Least-Expect-It-479969625</a></p>
| [
"little",
"sitting",
"small",
"pegasus",
"pony",
"surprised"
] | Toys & Games > Action Figures & Statues | [
"46159/images/image_1_compressed.jpg",
"46159/images/image_2_compressed.jpg",
"46159/images/image_3_compressed.jpg"
] | [
"46159/stls/pony.stl"
] | CC-BY | https://www.printables.com/model/46159 | data_0032.tar |
151581 | Six Fit: 2D Packing Puzzle | <p>This is <strong>Six Fit</strong>, a 2d packing puzzle where you need to fit the 6 pentominoes into the tray.</p><p>At first it seems like the tray is the wrong size, but persist: a solution exists!</p> | [
"puzzle",
"packing",
"pentominoes"
] | Toys & Games > Puzzles & Brain-teasers | [
"151581/images/image_1_compressed.jpg"
] | [
"151581/stls/sixfit-pieces.stl",
"151581/stls/sixfit-tray.stl"
] | CC0 | https://www.printables.com/model/151581 | data_0032.tar |
748077 | Six Little Nightmare | <p>Impressa em uma ender 3, com ABS da voolt3d bico 0,4 e altura de camada 0,2. Não configurei muito a impressora e ocorreram uns pontos de subextrusão, mas nada que afetou o modelo </p><p> </p><p> </p> | [
"decoration",
"game",
"steam",
"geek",
"figure",
"littlenightmare"
] | Tabletop Miniatures > Characters & Monsters | [
"748077/images/image_1_compressed.jpg",
"748077/images/image_2_compressed.jpg",
"748077/images/image_3_compressed.jpg",
"748077/images/image_4_compressed.jpg",
"748077/images/image_5_compressed.jpg"
] | [
"748077/stls/six-figura.stl"
] | CC0 | https://www.printables.com/model/748077 | data_0032.tar |
15344 | Six Pack Beer Bottle Carrier | <p>Six pack beer bottle carrier. Printed with PLA 100% infill. It's very rigid and works well. You could add a color change above 5mm height to highlight the writing. Enjoy!</p>
<h3>Print instructions</h3><p>I would print at 100% infill if using PLA.</p> | [
"beer",
"carrier",
"pack",
"6",
"six",
"tote"
] | Household > Kitchen | [
"15344/images/image_1_compressed.jpg",
"15344/images/image_2_compressed.jpg"
] | [
"15344/stls/six-pack-carrier-beer-v3.stl"
] | CC-BY | https://www.printables.com/model/15344 | data_0032.tar |
471594 | SK Slavia whistle | <p>Nice whistle in SKS colors...</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p><a href="http://amzn.to/2rqZ6Uo" rel="ugc nofollow" target="_blank">i3 MK3</a></p></div>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p class... | [
"whistle",
"thingiverse",
"sks",
"slavia",
"1892"
] | Hobby & Makers > Other Ideas | [
"471594/images/image_1_compressed.jpg",
"471594/images/image_2_compressed.jpg"
] | [
"471594/stls/STL_SK_WHISTLE.stl"
] | CC-BY | https://www.printables.com/model/471594 | data_0032.tar |
559914 | Skadis | <p>little size adjustment so that it fits the printplate of the Prusa MK4</p> | [
"ikea",
"skadis",
"ikeaskadis",
"skadisikea"
] | Art & Design > Wall-mounted | [
"559914/images/image_1_compressed.jpg"
] | [
"559914/stls/Ikea_Skadis_1.stl"
] | CC-BY | https://www.printables.com/model/559914 | data_0032.tar |
455519 | Skadis (Wire-)Brush Hook | <p>This is a (wire-) brush holder for the Ikea Skadis peg board. It is made for the standard set of three brushes (nylon, brass and steel). Enjoy :) </p><p>I printed in PLA with supports.</p> | [
"ikea",
"brush",
"skadis",
"brass",
"ikeaskadis",
"wirebrush"
] | Hobby & Makers > Organizers | [
"455519/images/image_1_compressed.jpg"
] | [
"455519/stls/Skadis Bürstenhaken.stl"
] | CC-BY | https://www.printables.com/model/455519 | data_0032.tar |
1369700 | Skadis - caliper holder - No Post-Processing | <p>The detachable ribs are expected to be removed after printing.<br><br>* Printed in PLA<br>* No brim <br>* No generated support<br><br> </p> | [
"supportless",
"caliper"
] | Hobby & Makers > Organizers | [
"1369700/images/image_1_compressed.jpg",
"1369700/images/image_2_compressed.jpg",
"1369700/images/image_3_compressed.jpg",
"1369700/images/image_4_compressed.jpg"
] | [
"1369700/stls/Pittsburgh_caliper_holder_no_postprocessing.stl"
] | CC-BY | https://www.printables.com/model/1369700 | data_0032.tar |
423568 | Skadis - Cutter mount | <p>Holder for a cutter. Suitable for IKEA SKADIS pegboards. Simply remixed to fit my cutter.</p><p>Prints well without support.</p> | [
"ikea",
"mount",
"cutter",
"skadis",
"boxcutter",
"cutterholder"
] | 3D Printers > Other Printer Parts & Upgrades | [
"423568/images/image_1_compressed.jpg"
] | [
"423568/stls/mount.stl"
] | CC-BY | https://www.printables.com/model/423568 | data_0032.tar |
323886 | Skadis - Pittsburgh caliper holder | <p>Pittsburgh caliper holder for IKEA Skadis pegboard.<br>Print vertically w/ supports</p> | [] | Hobby & Makers > Organizers | [
"323886/images/image_1_compressed.jpg"
] | [
"323886/stls/Pittsburgh caliper holder.stl"
] | CC-BY | https://www.printables.com/model/323886 | data_0032.tar |
423559 | SKADIS - Ratchet holder | <p>Prints ok without support, but perfect with support under the peg.</p> | [
"ikea",
"holder",
"pegboard",
"skadis",
"ratchet",
"ratchetwrench",
"ratchetholder"
] | 3D Printers > Other Printer Parts & Upgrades | [
"423559/images/image_1_compressed.jpg",
"423559/images/image_2_compressed.jpg",
"423559/images/image_3_compressed.jpg"
] | [
"423559/stls/SKADIS - Ratchet holder.stl"
] | CC-BY | https://www.printables.com/model/423559 | data_0032.tar |
662066 | Skadis - Skådis - Ruler peg | <p>A plate with a peg to hang a ruler off. Or anything else that fits on a 5.5mm peg! </p><p>I modeled the base on the caliper holder by Synthetic_Future, which in turn is based on Brian.Kuos model. After trying out a couple of different Skådis-holders I really like how this base connects to the peg board and have... | [
"ruler",
"skadis"
] | Household > Other House Equipment | [
"662066/images/image_1_compressed.jpg"
] | [
"662066/stls/rulerskadis.stl"
] | CC0 | https://www.printables.com/model/662066 | data_0032.tar |
692857 | Skadis 3DLAC | <p>Skadis 3DLAC Holder</p> | [
"skadis"
] | Hobby & Makers > Organizers | [
"692857/images/image_1_compressed.jpg",
"692857/images/image_2_compressed.jpg",
"692857/images/image_3_compressed.jpg"
] | [
"692857/stls/Skadis 3DLAC.stl"
] | CC0 | https://www.printables.com/model/692857 | data_0032.tar |
128746 | Skadis 5 box compact storage | <p>Here's a more compact alternative to having a bunch of storage boxes hanging on your Skadis board. It's a 5 box solution that is easy to print and does not require too much filament.</p><p>It attaches with the <a href="https://www.thingiverse.com/thing:2851040">universal container hook by CSD_Salzburg</a>, also incl... | [
"skadis"
] | Hobby & Makers > Organizers | [
"128746/images/image_1_compressed.jpg"
] | [
"128746/stls/5 container compact storage.stl",
"128746/stls/Skadis_Container_Hook.stl"
] | CC0 | https://www.printables.com/model/128746 | data_0032.tar |
73291 | Skadis 7x small screwdriver holder | <p>Simple holder for my 7 small Wiha screwdrivers.</p>
<p>Fusion360 link: <a href="https://a360.co/2wRh7KL">https://a360.co/2wRh7KL</a></p>
Category: Tool Holders & Boxes | [
"skadis",
"thingiverse",
"screwdriverholder",
"ikeaskadis"
] | Hobby & Makers > Organizers | [
"73291/images/image_1_compressed.jpg",
"73291/images/image_2_compressed.jpg",
"73291/images/image_3_compressed.jpg"
] | [
"73291/stls/driver_holder.stl"
] | CC-BY | https://www.printables.com/model/73291 | data_0032.tar |
1320234 | Skadis Adapter for Blade Dispenser for Bed Scraper XL | <p>This is just an adapter to use the Blade Dispenser for Bed Scraper XL on an IKEA Skadis Board</p><p> </p><p>Important note:</p><p>My tolerance and post print expansion results may be different than yours, that's why -even though I left enough gap- it kind of fit like a glove due to expansion. Play around with y... | [
"blade",
"bed",
"scraper",
"skadis",
"dispenser"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1320234/images/image_1_compressed.jpg",
"1320234/images/image_2_compressed.jpg"
] | [
"1320234/stls/Blade Dispenser for Bed Scraper XL Skadis Adapter.stl"
] | CC0 | https://www.printables.com/model/1320234 | data_0032.tar |
209557 | Skadis alcohol bottle holder | <p>I made this to hold the alcohol I use to clean my build plate, Printed with supports for the hooks. Printed with overture petg on an ender 3 v2.</p> | [] | Hobby & Makers > Organizers | [
"209557/images/image_1_compressed.jpg"
] | [
"209557/stls/skadis alchol holder.stl"
] | CC0 | https://www.printables.com/model/209557 | data_0032.tar |
770055 | Skadis Blow torch holder | Easy Blow torch holder
Diameter 30mm | Download free 3D printable STL models | [] | 3D Printers > Accessories | [
"770055/images/image_1_compressed.jpg"
] | [
"770055/stls/blow_torch.stl"
] | CC0 | https://www.printables.com/model/770055 | data_0032.tar |
306174 | Skadis Boards linker | <p>UPGRADED VERSION: https://www.printables.com/model/375246-skadis-boards-linker-v-20</p><p>A simple bracket designed to hold two Skadis board together, for example if you don't want to drill too many holes for wall fasteners.</p><p>Uses holes 40 mm apart. Snaps into place without additional reinforcements.</p> | [
"ikea",
"skadis",
"ikeaskadis"
] | Hobby & Makers > Organizers | [
"306174/images/image_1_compressed.jpg",
"306174/images/image_2_compressed.jpg"
] | [
"306174/stls/Skadis linker.stl"
] | CC0 | https://www.printables.com/model/306174 | data_0032.tar |
334391 | Skadis Bobbin Holder | <p>A quick remix of Janomes Boobin holder to allow your bobbins to be attached to an ikea skadis peg board. </p><p> </p><p>Printed in PLA </p> | [
"ikea",
"holder",
"sewing",
"skadis",
"bobbin",
"bobbins",
"organisaer"
] | Hobby & Makers > Organizers | [
"334391/images/image_1_compressed.jpg",
"334391/images/image_2_compressed.jpg"
] | [
"334391/stls/bobbin holder skadis.stl"
] | CC0 | https://www.printables.com/model/334391 | data_0032.tar |
308112 | Skadis Bosch Bit Set Holder | <p>A small shelf for BOSCH bit set in a case (100mm x 46mm)</p> | [
"bit",
"bosch",
"skadis",
"skadistnut"
] | Hobby & Makers > Organizers | [
"308112/images/image_1_compressed.jpg",
"308112/images/image_2_compressed.jpg"
] | [
"308112/stls/Skadis-Bitbox-Halter-Bosch v4.stl"
] | CC-BY | https://www.printables.com/model/308112 | data_0032.tar |
278334 | Skadis Bottle Holder Collection | [
"bottle",
"skadis",
"magigoo",
"dimafix"
] | Hobby & Makers > Organizers | [
"278334/images/image_1_compressed.jpg"
] | [
"278334/stls/SkadisBottleHolder30MM.stl",
"278334/stls/SkadisBottleHolder44,5MM.stl"
] | CC0 | https://www.printables.com/model/278334 | data_0032.tar | |
367821 | Skadis Bullet Bill Mario Hook | Skadis adapter for Bullet Bill | Download free 3D printable STL models | [
"mario",
"skadis",
"bullet",
"bulletbill"
] | Toys & Games > Other Toys & Games | [
"367821/images/image_1_compressed.jpg",
"367821/images/image_2_compressed.jpg"
] | [
"367821/stls/ganchoskadis.stl"
] | CC-BY | https://www.printables.com/model/367821 | data_0032.tar |
950456 | Skadis Cable Winder | Added skadis mount | [
"printinplace",
"usb",
"skadis",
"cablemanagement"
] | Hobby & Makers > Organizers | [
"950456/images/image_1_compressed.jpg"
] | [
"950456/stls/skadis_cable_winder.stl"
] | CC-BY | https://www.printables.com/model/950456 | data_0032.tar |
165259 | SKADIS Caliper Holder | <p>Designed to fit a Kynup 200mm caliper, your mileage may vary.</p><p>There's no perfect way to orient this model on the print bed, since it's an awkwardly-shaped part. You'll have to use supports. I recommend PETG so that the mounting pegs don't break, but PLA may work.</p> | [
"wallmount",
"pegboard",
"skadis",
"caliper",
"caliperholder",
"ikeaskadis",
"digitalcaliper",
"kynup"
] | Hobby & Makers > Tools | [
"165259/images/image_1_compressed.jpg"
] | [
"165259/stls/SKADIS Caliper Holder.stl"
] | CC0 | https://www.printables.com/model/165259 | data_0032.tar |
553109 | Skadis Caliper Holder (Mitutoyo) | <p>I kept the base from Brian.Kuo's model but made the connectors to the Skadis board slightly shorter and narrower. This means they ‘should’ print to fit straight out of the printer.</p><p>Reworked the entire front from scratch. It's a hanging model instead of sliding it in. Made to be very space efficient. Print with... | [
"ikea",
"holder",
"storage",
"skadis",
"caliper"
] | Hobby & Makers > Organizers | [
"553109/images/image_1_compressed.jpg",
"553109/images/image_2_compressed.jpg",
"553109/images/image_3_compressed.jpg",
"553109/images/image_4_compressed.jpg"
] | [
"553109/stls/CaliperSkadis.stl"
] | CC0 | https://www.printables.com/model/553109 | data_0032.tar |
281399 | SKADIS caliper holder with battery shelf | <p>FIRST THING FIRST<br><br>This model use the universal hook from CSD_Salzburg (Thingiverse)<br><a href="https://www.thingiverse.com/thing:2853261">https://www.thingiverse.com/thing:2853261</a><br><br>THIS IS One of the best setup for SKADIS for thoses reasons:<br>- Most of the thing print without support<br>- the hoo... | [
"holder",
"pegboard",
"skadis",
"calipers",
"caliperholder"
] | 3D Printers > Accessories | [
"281399/images/image_1_compressed.jpg",
"281399/images/image_2_compressed.jpg",
"281399/images/image_3_compressed.jpg",
"281399/images/image_4_compressed.jpg"
] | [
"281399/stls/Skadis_caliper_holder.stl",
"281399/stls/Skadis_Universal_Hook.stl"
] | CC-BY | https://www.printables.com/model/281399 | data_0032.tar |
311977 | SKADIS combination square holder | <p>Simple SKADIS peg board holder for a combination square.</p><p>Printed at 0.2mm layers, 20% infill, no supports.</p> | [
"tool",
"holder",
"mount",
"organization",
"pegboard",
"skadis",
"pegboardmount",
"square",
"combination"
] | Hobby & Makers > Organizers | [
"311977/images/image_1_compressed.jpg",
"311977/images/image_2_compressed.jpg"
] | [
"311977/stls/Combination square holder.stl"
] | CC-BY | https://www.printables.com/model/311977 | data_0032.tar |
136354 | Skadis compact storage boxes (2 or 3) | Remix of the excellent design by Sorin V. As I wanted fewer boxes, I just deleted the front ones and their support. | Download free 3D printable STL models | [
"storage",
"skadis"
] | Hobby & Makers > Organizers | [
"136354/images/image_1_compressed.jpg"
] | [
"136354/stls/2 container compact storage.stl",
"136354/stls/3 container compact storage.stl",
"136354/stls/Skadis_Container_Hook.stl"
] | CC-BY | https://www.printables.com/model/136354 | data_0032.tar |
506178 | Skadis Compatible Soldering Iron Tip Rack | <p>A compact 3-level soldering iron tip rack for use with IKEA Skadis that holds fifteen 7mm style solder iron tips like those from AOYUE or similar. This is based on a desktop rack that I found years ago. I remade the design to get it off my workbench and hang it on the wall instead.</p> | [
"soldering",
"skadis",
"ikeaskadis"
] | Hobby & Makers > Organizers | [
"506178/images/image_1_compressed.jpg"
] | [
"506178/stls/Skadis Solder Tip Rack.stl"
] | CC-BY | https://www.printables.com/model/506178 | data_0032.tar |
291744 | Skadis continuous shelf | <p>Shelf for Ikea Skadis board that can be assembled into continuous row and uses relatively small amount of filament.</p><h3>Printing</h3><p>Print without supports, take care not to place the bracket on the print-bed with the hooks overhanging.</p><h3>Assembly</h3><p>Put the brackets on first, then push in the shelves... | [
"shelf",
"ikea",
"skadis",
"shelving",
"ikeaskadis"
] | Hobby & Makers > Organizers | [
"291744/images/image_1_compressed.jpg",
"291744/images/image_2_compressed.jpg",
"291744/images/image_3_compressed.jpg"
] | [
"291744/stls/SkadisContinuousShelf-Bracket.stl",
"291744/stls/SkadisContinuousShelf.stl"
] | CC0 | https://www.printables.com/model/291744 | data_0032.tar |
136316 | Skadis desoldering pump holder | <p>Holds a standart desoldering pump on the IKEA Skadis board.</p> | [
"organization",
"pegboard",
"skadis",
"ikeaskadis"
] | 3D Printers > Accessories | [
"136316/images/image_1_compressed.jpg"
] | [
"136316/stls/Skadis Entlötpumpe.stl"
] | CC0 | https://www.printables.com/model/136316 | data_0032.tar |
869960 | Skadis Drill Mount | <p>Printed with PETG, 15% infill and 4 perimeters for strength. </p><p>You will need supports. </p> | [
"skadis",
"milwaukee"
] | Hobby & Makers > Tools | [
"869960/images/image_1_compressed.jpg",
"869960/images/image_2_compressed.jpg"
] | [
"869960/stls/Skadis Drill Mount.stl"
] | CC-BY | https://www.printables.com/model/869960 | data_0032.tar |
408870 | Skadis Einhell Power X Change Mount | <p>Remixed the holder to make it mount to the ikea skadis walls. Also made more space for the battery, so it slides easier in and out.</p><p>Printing it upright with organic supports seems to be the optimal way.</p><p>There is also the .step file if you want to make an easy change.</p> | [
"holder",
"mount",
"battery",
"power",
"skadis",
"x",
"change",
"einhell"
] | Hobby & Makers > Organizers | [
"408870/images/image_1_compressed.jpg"
] | [
"408870/stls/Power X Change Skadis Mount.stl"
] | GPL2.0 | https://www.printables.com/model/408870 | data_0032.tar |
823536 | Skadis Ender 3 v3 KE/SE filament spool holder | <p>Print how ever u like</p><p>I did 20% infill</p><p>It uses your own spool holder from the ender. Saves filament ;)</p><p>You can just screw it in place with the original screws. :)</p> | [
"ikea",
"filament",
"filamentspoolholder",
"skadis",
"ender3"
] | 3D Printers > Creality Parts & Upgrades | [
"823536/images/image_1_compressed.jpg"
] | [
"823536/stls/Skadis Ender 3 V3 KE-SE filament holder.stl"
] | CC0 | https://www.printables.com/model/823536 | data_0032.tar |
370465 | Skadis ender style tool holder (remix) | remixed the original of OpenDelta big thanks to him | Download free 3D printable STL models | [
"ikea",
"toolholder",
"skadis"
] | Hobby & Makers > Tools | [
"370465/images/image_1_compressed.jpg"
] | [
"370465/stls/skadis Ender style tool holder.stl"
] | CC0 | https://www.printables.com/model/370465 | data_0032.tar |
458673 | Skadis Filament Spool Holder | <p>This is a remix of the model by Alecs.</p><p>My version is very plain and simple and can be used for 1 Kg (big spools) and 250 to 500g filaments as well. I also closed the holes to make the design look more simple with a nice finish.</p><p> </p><ol><li>I printed it in PLA, PLA+ and PETG, but PETG was the most s... | [] | 3D Printers > Other Printer Parts & Upgrades | [
"458673/images/image_1_compressed.jpg",
"458673/images/image_2_compressed.jpg",
"458673/images/image_3_compressed.jpg",
"458673/images/image_4_compressed.jpg",
"458673/images/image_5_compressed.jpg",
"458673/images/image_6_compressed.jpg",
"458673/images/image_7_compressed.jpg",
"458673/images/image_8... | [
"458673/stls/spool_left.stl",
"458673/stls/spool_right.stl"
] | CC0 | https://www.printables.com/model/458673 | data_0032.tar |
311489 | Skadis Fire TV remote holder | <p>A quick remote holder for Fire TV remotes, this fits both the Amazon Fire TV stick remotes, as well as the ones which come with Insignia TVs with built in Fire TV. Print on it's face and use minimal support for just the long part of the Skadis Peg.</p> | [
"remote",
"skadis",
"firetv",
"remoteholder",
"ikeaskadis"
] | Gadgets > Photo & Video | [
"311489/images/image_1_compressed.jpg"
] | [
"311489/stls/Skadis Fire TV Remote.stl"
] | CC-BY | https://www.printables.com/model/311489 | data_0032.tar |
212182 | Skadis Flower Pot |
<p>This is a simple flower pot based on CSD Salzburg's 80mm container. To build it you need:</p>
<ul>
<li>2x CSD Salzburg's container hook (included in files)</li>
<li>1x CSD Salzburg's container 80mm (included in files)</li>
<li>1x The flowe pot</li>
<li>2x The foot</li>
<li>2x The clip</li>
</ul>
<p>To assemble ev... | [
"skadis",
"thingiverse",
"ikeaskadis"
] | Household > Other House Equipment | [
"212182/images/image_1_compressed.jpg",
"212182/images/image_10_compressed.jpg",
"212182/images/image_11_compressed.jpg",
"212182/images/image_12_compressed.jpg",
"212182/images/image_13_compressed.jpg",
"212182/images/image_2_compressed.jpg",
"212182/images/image_3_compressed.jpg",
"212182/images/ima... | [
"212182/stls/Clip_v8.stl",
"212182/stls/Foot_v4.stl",
"212182/stls/Pot_v8.stl",
"212182/stls/Skadis_Container_80mm.stl",
"212182/stls/Skadis_Container_Hook.stl"
] | CC-BY | https://www.printables.com/model/212182 | data_0032.tar |
135918 | Skadis folding rule holder | <p>This is a simple folding rule (Zollstock) holder for Ikea Skadis walls.</p><p> </p> | [
"ikea",
"holder",
"skadis",
"measurementtool",
"ikeaskadis",
"foldingruler"
] | Hobby & Makers > Organizers | [
"135918/images/image_1_compressed.jpg",
"135918/images/image_2_compressed.jpg"
] | [
"135918/stls/skadis_zollstock_clip.stl"
] | CC-BY | https://www.printables.com/model/135918 | data_0032.tar |
507755 | Skadis Glove Box Holder | <p>The holder is sized for boxes 55 mm deep.</p><p>Print two of the holders: one normal and one mirrored.</p><p>There are different version available; the universal hook set is deeper (+4.5 mm) to accommodate the hook.</p> | [
"holder",
"pegboard",
"skadis",
"glovebox",
"universalhook",
"gloveboxholder"
] | Hobby & Makers > Organizers | [
"507755/images/image_1_compressed.jpg"
] | [
"507755/stls/Skadis Glove Box Holder 55 thin.stl",
"507755/stls/Skadis Glove Box Holder 55 universal hc.stl",
"507755/stls/Skadis Glove Box Holder 55 universal thin.stl",
"507755/stls/Skadis Glove Box Holder 55 universal.stl",
"507755/stls/Skadis Glove Box Holder 55.stl"
] | CC0 | https://www.printables.com/model/507755 | data_0032.tar |
623580 | Skadis Glue Holder | A holder for superglue for Ikea Skais peg boards. | Download free 3D printable STL models | [
"ikea",
"glue",
"pegboard",
"skadis"
] | Hobby & Makers > Organizers | [
"623580/images/image_1_compressed.jpg"
] | [
"623580/stls/Glue Holder.stl"
] | CC-BY | https://www.printables.com/model/623580 | data_0032.tar |
278081 | Skadis Gridfnity Base T-Nut | Gridfinity bases for skadis board, uses the t-nut design to mount so no supports needed. | Download free 3D printable STL models | [
"base",
"skadis",
"tnut",
"gridfinity",
"skadistnut"
] | Hobby & Makers > Organizers | [
"278081/images/image_1_compressed.jpg",
"278081/images/image_2_compressed.jpg"
] | [
"278081/stls/1X6 Skadis Gridfinity T-Nut.stl",
"278081/stls/2X6 Skadis Gridfinity T-Nut.stl"
] | CC-BY | https://www.printables.com/model/278081 | data_0032.tar |
145128 | SKADIS Hammer Holder | <h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Creality</p><p><strong>Printer: </strong></p><p>Ender 5</p><p><strong>Rafts:</strong></p><p>Doesn't Matter</p><p><strong>Supports: </strong></p><p>Yes</p><p><strong>Resolution:</strong></p><p>.20</p><p><strong>Infill: </strong></p><p>50</p><... | [
"ikea",
"pegboard",
"skadis",
"hammer",
"remix",
"thingiverse"
] | Household > Office | [
"145128/images/image_1_compressed.jpg",
"145128/images/image_2_compressed.jpg",
"145128/images/image_3_compressed.jpg"
] | [
"145128/stls/Hammer_Holder-2.stl"
] | CC-BY | https://www.printables.com/model/145128 | data_0032.tar |
395112 | Skadis Headphone Hanger | a simple headphone hanger that prints in 3 parts
*UPDATE new dovetail hooks | Download free 3D printable STL models | [
"ikea",
"headphone",
"skadis"
] | Hobby & Makers > Organizers | [
"395112/images/image_1_compressed.jpg",
"395112/images/image_2_compressed.jpg",
"395112/images/image_3_compressed.jpg",
"395112/images/image_4_compressed.jpg"
] | [
"395112/stls/headphone hanger UPDATED.stl",
"395112/stls/Skadis headphone hanger.stl"
] | CC0 | https://www.printables.com/model/395112 | data_0032.tar |
659250 | Skadis headphone holder | <p>you need to print 2 hooks, wich you can press in the back of the holder.</p> | [
"headphones",
"skadis",
"skadisikea"
] | Hobby & Makers > Organizers | [
"659250/images/image_1_compressed.jpg"
] | [
"659250/stls/earphones holder.stl",
"659250/stls/hook.stl"
] | CC0 | https://www.printables.com/model/659250 | data_0032.tar |
439519 | Skadis Headset holder (PS ,XBOX and more) | <p>Unfortunately I have not found a headset holder for the Ikea Skadis hole board. For this reason I have designed one by myself.</p><p>In total there are 4 versions:<br>- Playstation logo<br>- Xbox logo<br>- empty board (feel free)<br>- without logo</p><p>I recommend you to print 0.2 so that the small parts between th... | [
"ikea",
"playstation",
"headset",
"skadis",
"xbox",
"xbox360",
"xboxone",
"playstation4",
"headsetholder",
"ikeaskadis",
"playstation5"
] | Gadgets > Video Games | [
"439519/images/image_1_compressed.jpg",
"439519/images/image_2_compressed.jpg",
"439519/images/image_3_compressed.jpg",
"439519/images/image_4_compressed.jpg",
"439519/images/image_5_compressed.jpg"
] | [
"439519/stls/Headsetholder empty plate.stl",
"439519/stls/Headsetholder empty.stl",
"439519/stls/Headsetholder PS.stl",
"439519/stls/Headsetholder xbox.stl"
] | CC-BY | https://www.printables.com/model/439519 | data_0032.tar |
839630 | Skadis Hex key holder | <h3>Hex key holder to fit 1.5 to 9mm hex key</h3><p>I was looking on Printables for a hex key holder to fit my hex key set but didn't find one that would allow for 7 and 9 hex keys, so… I made one !</p><p>The holder fits 1.5, 2, 2.5, 3 up to 9 hex keys.</p><p>The top of the holes are round, and then tapered to hexagona... | [
"skadis",
"hexkey"
] | Hobby & Makers > Organizers | [
"839630/images/image_1_compressed.jpg",
"839630/images/image_2_compressed.jpg"
] | [
"839630/stls/Fitment test.stl",
"839630/stls/Hex holder.stl",
"839630/stls/Support.stl"
] | CC-BY | https://www.printables.com/model/839630 | data_0032.tar |
505652 | Skadis holder for deburring tool | <p>A small holder for your skadis wall to hold your deburring tool.<br>It fits the classic ones with the big blue handle (22mm circumference).</p><p>has to be printed with supports under the skadis brackets.</p> | [
"skadis",
"deburring"
] | Hobby & Makers > Organizers | [
"505652/images/image_1_compressed.jpg",
"505652/images/image_2_compressed.jpg",
"505652/images/image_3_compressed.jpg"
] | [
"505652/stls/deburring tool holder.stl"
] | CC0 | https://www.printables.com/model/505652 | data_0032.tar |
877367 | Skadis Holder for Five 1/4 Inch Hex Bits | <p>Print with the holes facing down.</p> | [] | Hobby & Makers > Organizers | [
"877367/images/image_1_compressed.jpg",
"877367/images/image_2_compressed.jpg"
] | [
"877367/stls/skadisfivehexbit.stl"
] | CC0 | https://www.printables.com/model/877367 | data_0032.tar |
482550 | Skadis holder for Flipper Zero | <p>Print with organic supports.</p> | [
"holder",
"skadis",
"skadisikea",
"flipper",
"skadisholder",
"flipperzero"
] | Gadgets > Portable Devices | [
"482550/images/image_1_compressed.jpg",
"482550/images/image_2_compressed.jpg",
"482550/images/image_3_compressed.jpg"
] | [
"482550/stls/Skadis_holder_for_Flipper_Zero.stl"
] | CC0 | https://www.printables.com/model/482550 | data_0032.tar |
285455 | Skadis holder for pliers | <p>Simple, space efficient Skadis holder for pliers inspired by <a href="https://www.printables.com/model/277916-ikea-skadis-pliers-holder-up-to-8">IKEA Skadis pliers holder (up to 8)</a><br><a href="https://www.printables.com/model/277916-ikea-skadis-pliers-holder-up-to-8">by Kai</a>. It doesn't use anything from the ... | [
"ikea",
"pliers",
"skadis",
"pliersholder",
"pliershanger"
] | Hobby & Makers > Organizers | [
"285455/images/image_1_compressed.jpg",
"285455/images/image_2_compressed.jpg"
] | [
"285455/stls/SkadisHolderForPliers-even.stl",
"285455/stls/SkadisHolderForPliers-odd.stl"
] | CC0 | https://www.printables.com/model/285455 | data_0032.tar |
977606 | Skadis holder for Prusa nozzle brush | <p>Ikea Skadis holder for Prusa brass nozzle brush. Upper hook needs support.<br> </p><p><br> </p> | [
"ikea",
"skadis",
"ikeaskadis",
"nozzlebrush"
] | 3D Printers > Accessories | [
"977606/images/image_1_compressed.jpg"
] | [
"977606/stls/Nozzle Brush Holder.stl"
] | CC0 | https://www.printables.com/model/977606 | data_0032.tar |
586095 | Skadis Hook | <p>Skadis Hook</p><p>Simple parametric hook/bracket for Skadis. Feel free to use the Fusion 360 file to make design any length of hook as required.</p> | [
"shelf",
"parametric",
"ikea",
"hook",
"fusion360",
"customizable",
"skadis",
"shelfbracket",
"ikeaskadis",
"skadisikea",
"resizeable",
"skadishook",
"skadismount"
] | Hobby & Makers > Organizers | [
"586095/images/image_1_compressed.jpg"
] | [
"586095/stls/DoubleholeHook_110mm.stl",
"586095/stls/SkadisHook_30mm.stl",
"586095/stls/SkadisHook_40mm.stl",
"586095/stls/SkadisHook_50mm.stl",
"586095/stls/SkadisHook_55mm.stl",
"586095/stls/SkadisHook_60mm.stl",
"586095/stls/SkadisHook_90mm.stl"
] | CC-BY | https://www.printables.com/model/586095 | data_0032.tar |
88129 | Skadis Hook - Looser Fit |
<p>This is a remix of this hook: <a href="https://www.thingiverse.com/thing:2781654">https://www.thingiverse.com/thing:2781654</a></p>
<p>I thought the fit was a little too tight on the pegboard, so I moved the pin down 0.5mm to create a little bit looser fit for when I want to relocate it.</p>
<h3> Print Settings</h3... | [
"ikea",
"thingiverse",
"ikeaskadis"
] | Household > Office | [
"88129/images/image_1_compressed.jpg"
] | [
"88129/stls/Skadis_Hook_loose_fit.stl"
] | CC-BY | https://www.printables.com/model/88129 | data_0032.tar |
282765 | Skadis Hook 30mm Thin | <p>The 30mm Skadis hook was a little too thick to fit through the hole of the metal scraper spatula which came with my Elegoo Mars 2 Pro (and is common with many other SLA printers).</p><p>I therefore trimmed it to be a consistent 5mm throughout.</p> | [
"hook",
"scraper",
"skadis",
"spatula"
] | Hobby & Makers > Organizers | [
"282765/images/image_1_compressed.jpg"
] | [
"282765/stls/skadis_hook-30mm-thin.stl"
] | CC-BY | https://www.printables.com/model/282765 | data_0032.tar |
1101463 | Skadis Hook Clip | <p>These are hook clips for the IKEA SKÅDIS boards. These are very small, quick to print and do a great job of stopping the standard IKEA metal hooks from lifting out of the board when removing a tight fitting item.</p><p>Simply place the hook where you need it. Insert a clip into a hole near the bottom of ... | [
"ikea",
"holder",
"clip",
"skadis",
"hooks"
] | Hobby & Makers > Organizers | [
"1101463/images/image_1_compressed.jpg",
"1101463/images/image_2_compressed.jpg"
] | [
"1101463/stls/PrusaMK4_V2HookClip_x6.stl",
"1101463/stls/Skadis_Hook_Clip_v2.stl"
] | GPL3.0 | https://www.printables.com/model/1101463 | data_0032.tar |
407915 | skadis hook for deburring tool | <p>a hook to put the deburring tool onto the skadis wal</p><p>designed for this tool: </p><p>https://www.amazon.de/dp/B093PQXJCS?psc=1&ref=ppx_yo2ov_dt_b_product_details</p> | [
"skadis",
"deburring"
] | Art & Design > Wall-mounted | [
"407915/images/image_1_compressed.jpg",
"407915/images/image_2_compressed.jpg"
] | [
"407915/stls/Hook deburing.stl"
] | CC-BY | https://www.printables.com/model/407915 | data_0032.tar |
861539 | Skadis hook for wire cutter (thicker and stronger clip) | <p>I liked the original model for its minimal look, but the clip snapped off after printing it.<br>I remix it with a stronger clip after snapping the original.</p><p>I make sure to do the remix to be printed with no support.<br>It turned out alright </p><figure class="image image-style-align-center"><img src="http... | [
"ikea",
"holder",
"cutter",
"pegboard",
"skadis",
"wirecutter",
"cutterholder"
] | Hobby & Makers > Organizers | [
"861539/images/image_1_compressed.jpg",
"861539/images/image_2_compressed.jpg",
"861539/images/image_3_compressed.jpg"
] | [
"861539/stls/skadis_cutter_holderV2.stl",
"861539/stls/skadis_cutter_hook.stl"
] | CC0 | https://www.printables.com/model/861539 | data_0032.tar |
279167 | Skadis hook for wire cutters and pliers | Skadis hook for wire cutters and pliers | Download free 3D printable STL models | [
"ikea",
"pegboard",
"skadis",
"skadisikea",
"skadishook",
"skadismount"
] | Hobby & Makers > Organizers | [
"279167/images/image_1_compressed.jpg"
] | [
"279167/stls/skadis_plier.stl"
] | CC0 | https://www.printables.com/model/279167 | data_0032.tar |
656041 | Skadis hook, Olfa knife holder | <p>Easy print, make sure you orient it on the flat side so no supports are needed. </p><p> </p><p>Generally made for the Olfa L5-AL, but could be used with any Olfa knife (probably) and many others. If you're not sure, the hole width is 4.2 mm and the height 7 mm.</p><p>Can also be used just as a hook for the... | [
"holder",
"hook",
"knife",
"skadis",
"olfa"
] | Hobby & Makers > Organizers | [
"656041/images/image_1_compressed.jpg",
"656041/images/image_2_compressed.jpg",
"656041/images/image_3_compressed.jpg"
] | [
"656041/stls/Body1.stl"
] | CC0 | https://www.printables.com/model/656041 | data_0032.tar |
973193 | Skadis hooks | <p>Remix of Skadis hooks with more length (35, 40, 45, 50, 55, 60 and 65 mm) and a f3d archive to personalize the length. </p><ul><li>The measures in the archives are for the hook length, not for the inner space. The inner space is 10mm less.</li></ul> | [
"hook",
"skadis"
] | Hobby & Makers > Organizers | [
"973193/images/image_1_compressed.jpg",
"973193/images/image_2_compressed.jpg"
] | [
"973193/stls/sakdis hook 40mm.stl",
"973193/stls/Skadis hook 35mm.stl",
"973193/stls/skadis hook 45mm.stl",
"973193/stls/skadis hook 50mm.stl",
"973193/stls/skadis hook 55mm.stl",
"973193/stls/skadis hook 60mm.stl",
"973193/stls/skadis hook 65mm.stl",
"973193/stls/skadis_mount_lock.stl"
] | CC-BY | https://www.printables.com/model/973193 | data_0032.tar |
186717 | Skadis index card/Sticky Note holder | <p>Resized card holder to fit 4” x 6” index cards. Was pleased to find it works with sticky notes.</p><p>Edit: not a new model, just updated the title.</p><p>To get the proper hook support, I used Tinkercad to cut off the original hooks, then used Fusion 360 IKEA Skadis Peg Models by Rkimmell73 (3 peg bar) attached at ... | [
"holder",
"skadis",
"postit",
"thingiverse",
"indexcardholder"
] | Hobby & Makers > Other Ideas | [
"186717/images/image_1_compressed.jpg",
"186717/images/image_2_compressed.jpg",
"186717/images/image_3_compressed.jpg",
"186717/images/image_4_compressed.jpg",
"186717/images/image_5_compressed.jpg",
"186717/images/image_6_compressed.jpg",
"186717/images/image_7_compressed.jpg"
] | [
"186717/stls/Final_Index_Card_Box_and_Skadis_Hooks.stl",
"186717/stls/tinker.stl"
] | CC-BY | https://www.printables.com/model/186717 | data_0032.tar |
225112 | Skadis keyboard switch display | <p>Easy enough print. I use tree supports in Cura to avoid the supports for the hooks landing on the rest of the body - but should be fine either way.</p> | [] | Hobby & Makers > Other Ideas | [
"225112/images/image_1_compressed.jpg"
] | [
"225112/stls/Skadis switch display.stl"
] | CC0 | https://www.printables.com/model/225112 | data_0032.tar |
238598 | Skadis keychains | <p>Keychains for Ikea Skadis. </p><p>Do you have the Euroshopper, or a ego brick on your keychain? I've got you covered.</p><p>Or just print the one that locks into the Skadis like a glove.</p><p> </p><p>I printed the Lego and Euroshopper in PLA, and PETG carbon.</p><p>0.15 layer height with supports</p><p>Th... | [
"ikea",
"keychain",
"keys",
"lego",
"skadis",
"legocompatible",
"ikeaskadis",
"euroshopper"
] | Household > Other House Equipment | [
"238598/images/image_1_compressed.jpg",
"238598/images/image_2_compressed.jpg",
"238598/images/image_3_compressed.jpg",
"238598/images/image_4_compressed.jpg"
] | [
"238598/stls/Lego Skadis v1.stl",
"238598/stls/Lego Skadis2x8 v1.stl",
"238598/stls/Skadis_Euroshopper v1.stl",
"238598/stls/Skadis_keychain v1.stl"
] | CC0 | https://www.printables.com/model/238598 | data_0032.tar |
230725 | Skadis kitchenroll_hanger up | <p>I flipped the mounting points.<br>When you top mount the holder you free up space on the board.</p> | [
"holder",
"hanger",
"kitchenroll",
"skadis",
"ikeaskadis",
"kitchenrollholder"
] | Hobby & Makers > Organizers | [
"230725/images/image_1_compressed.jpg",
"230725/images/image_2_compressed.jpg",
"230725/images/image_3_compressed.jpg"
] | [
"230725/stls/Skadis kitchenroll_Hanger Up left.stl.stl",
"230725/stls/Skadis kitchenroll_Hanger Up right.stl",
"230725/stls/Skadis kitchenroll_hanger up.stl",
"230725/stls/skadis_kitchen-roll_screw.stl"
] | CC0 | https://www.printables.com/model/230725 | data_0032.tar |
497750 | Skadis Large Hooks | A set of large sturdy hooks for the IKEA Skadis pegboard. | Download free 3D printable STL models | [
"hook",
"hanger",
"pegboard",
"skadis"
] | Hobby & Makers > Organizers | [
"497750/images/image_1_compressed.jpg"
] | [
"497750/stls/Skadis Large Hook 40.stl",
"497750/stls/Skadis Large Hook 45.stl",
"497750/stls/Skadis Large Hook 50.stl",
"497750/stls/Skadis Large Hook 55.stl",
"497750/stls/Skadis Large Hook 60.stl"
] | CC0 | https://www.printables.com/model/497750 | data_0032.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.