model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
298080 | Skadis Leatherman Holder | <p>Uses the dovetail system to attach to the skadis system. Recommend printing at 0.2mm layer height otherwise the dovetails will be too tight.</p> | [
"skadis",
"ikeaskadis",
"leatherman"
] | Hobby & Makers > Tools | [
"298080/images/image_1_compressed.jpg",
"298080/images/image_2_compressed.jpg"
] | [
"298080/stls/Skadis dovetail peg Double.stl",
"298080/stls/Skadis dovetail peg.stl",
"298080/stls/Skadis Leatherman Holder.stl"
] | CC-BY | https://www.printables.com/model/298080 | data_0032.tar |
1093135 | Skadis Lego/Mega T-Clip Platform | <p>Added the T-Clip system to the Skadis/Mega platform </p> | [
"lego",
"mega",
"skadis",
"skadisikea"
] | Household > Home Decor | [
"1093135/images/image_1_compressed.jpg",
"1093135/images/image_2_compressed.jpg",
"1093135/images/image_3_compressed.jpg"
] | [
"1093135/stls/4x4MegaMotuSkadisTClip.stl",
"1093135/stls/6x12MegaMotuSkadisTClip.stl",
"1093135/stls/8x6MegaMotuSkadisTClip.stl"
] | CC-BY | https://www.printables.com/model/1093135 | data_0032.tar |
453695 | Skadis Magigoo Holder | <p>Holds a bottle of Magigoo for IKEA Skadis! Or any other 30mm diameter bottle.</p><p>Prints well with any settings/material (I used .15mm layer PLA). I recommend using organic supports for the tabs.</p> | [
"ikea",
"skadis",
"magigoo"
] | Hobby & Makers > Organizers | [
"453695/images/image_1_compressed.jpg",
"453695/images/image_2_compressed.jpg"
] | [
"453695/stls/MagigooSkadisHolder.stl"
] | CC-BY | https://www.printables.com/model/453695 | data_0032.tar |
119818 | SKADIS magnetic tool holder | <p>These tool holders are designed for 0.5in (½) and 0.375in (3/8) neodymium magnets. They will require supports for the hook. For a good fit in the peg holes, I don't clean the supports completely which leaves a bit more friction. Whittle down if it's a bit too tight.</p><p>Glue the magnets in, they can work themselve... | [
"tool",
"ikea",
"holder",
"magnet",
"skadis"
] | Hobby & Makers > Organizers | [
"119818/images/image_1_compressed.jpg"
] | [
"119818/stls/0.375in magnet peg.stl",
"119818/stls/0.5in magnet peg.stl"
] | CC-BY | https://www.printables.com/model/119818 | data_0032.tar |
252583 | Skadis magnetic tool rack | <p>Holder workshop tool holder for Parkside(LIDL Supermarket) for ikea skadis plates. Attention future series can be thinner or thicker!!!</p> | [
"magnet",
"magnetic",
"skadis",
"magneticholder"
] | Hobby & Makers > Tools | [
"252583/images/image_1_compressed.jpg",
"252583/images/image_2_compressed.jpg",
"252583/images/image_3_compressed.jpg",
"252583/images/image_4_compressed.jpg"
] | [
"252583/stls/Magnetic Holder.stl"
] | CC0 | https://www.printables.com/model/252583 | data_0032.tar |
637819 | Skadis Makerfire | Halterung für Schraubendreher | Download free 3D printable STL models | [] | Hobby & Makers > Organizers | [
"637819/images/image_1_compressed.jpg"
] | [
"637819/stls/Skadis Makerfire.stl"
] | CC0 | https://www.printables.com/model/637819 | data_0032.tar |
335063 | SKADIS measuring tape holder (3m) | <p>Support for 3 m measuring tape by STANLEY for the IKEA system SKADIS.</p> | [
"ikea",
"skadis",
"ikeaskadis"
] | Hobby & Makers > Organizers | [
"335063/images/image_1_compressed.jpg",
"335063/images/image_2_compressed.jpg",
"335063/images/image_3_compressed.jpg"
] | [
"335063/stls/SKADIS STANDLEY measuring tape holder (3m).stl"
] | CC-BY | https://www.printables.com/model/335063 | data_0032.tar |
791452 | Skadis micro hooks | <p>Hooks of varying sizes for the IKEA Skadis peg board. From 10mm - 30mm internal hook depth</p> | [
"storage",
"organization",
"pegboard",
"skadis",
"hooks",
"ikeaskadis"
] | Household > Office | [
"791452/images/image_1_compressed.jpg",
"791452/images/image_2_compressed.jpg"
] | [
"791452/stls/10mm hook.stl",
"791452/stls/12mm hook.stl",
"791452/stls/15mm hook.stl",
"791452/stls/18mm hook.stl",
"791452/stls/25mm hook.stl",
"791452/stls/30mm hook.stl"
] | CC-BY | https://www.printables.com/model/791452 | data_0032.tar |
599329 | Skadis Mk4 Kit tools holder | <p>A quick model for holding all the tools that came with my Mk4 kit on my Skadis pegboard.</p><p>Holds the screw driver, pliers, 2 wrenchs, 4 allen keys, 2 torx keys, and 1 nozzle cleaning needle that came with the Mk4 kit. It does not hold the one time use plastic printed tools that also came in the kit.</p> | [
"holder",
"tools",
"skadis"
] | Hobby & Makers > Organizers | [
"599329/images/image_1_compressed.jpg"
] | [
"599329/stls/Prusa Tools Holder.stl"
] | CC-BY | https://www.printables.com/model/599329 | data_0032.tar |
935836 | Skadis mount for eSun Vacuum Kit Pro 3 | <p>This is a holder for the eSun eVacuum Kit Pro v3 for ikea skadis, <br>the pump base is larger than the previous versions because it comes with a silicon gasket (see picture)</p><p> </p><p>You might want to add more top layers to avoid pillowing on the top-most part of the model, I had to bump it up t... | [
"vacuum",
"pump",
"skadis",
"esun"
] | Hobby & Makers > Organizers | [
"935836/images/image_1_compressed.jpg",
"935836/images/image_2_compressed.jpg",
"935836/images/image_3_compressed.jpg"
] | [
"935836/stls/eSun_pump.stl"
] | BSD | https://www.printables.com/model/935836 | data_0032.tar |
113879 | Skadis Mount for Knipex Electronic Super Knips |
<p>A mount for the Knipex Electronic Super Knips electronics side cutter(KNIPEX 78 03 125).<br/>
With and without pliers icon print.<br/>
Print with the flat side down and with support.</p>
<h3> Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Anet</p>
<p><p class="detail-setting printer"><strong>Prin... | [
"cutter",
"tools",
"toolsholder",
"skadis",
"thingiverse",
"pliersholder",
"ikeaskadis",
"skadisikea",
"sidecutter"
] | Hobby & Makers > Tools | [
"113879/images/image_1_compressed.jpg",
"113879/images/image_2_compressed.jpg",
"113879/images/image_3_compressed.jpg"
] | [
"113879/stls/skadis_pliers_knipex.stl",
"113879/stls/skadis_pliers_knipex_without_print.stl"
] | CC-BY | https://www.printables.com/model/113879 | data_0032.tar |
105159 | SKADIS mount for TERTIAL Lamp | <p>Bulkier base for IKEA TERTIAL lamp specifically for mounting on SKADIS pegboard. Printed in the same orientation it is mounted for best fit with lamp.</p><p> </p><p>additional parts needed: </p><p>4 x M5 25mm screw</p><p>4 x M5 Hex nut</p><p>4 x M5 flat washer</p> | [
"skadis",
"m5",
"ikeaskadis",
"m5nut",
"tertial",
"ikeatertial"
] | Household > Office | [
"105159/images/image_1_compressed.jpg",
"105159/images/image_2_compressed.jpg"
] | [
"105159/stls/skadis mount v6.stl"
] | CC0 | https://www.printables.com/model/105159 | data_0032.tar |
372692 | SKADIS mounted earring holder | <p>I've been designing earrings for my wife for some time now. We recently hung a smaller Ikea Skadis unit for her to organize all of those earrings. It works pretty good but is kind of clumsy getting the earrings on and off of the Skadis unit. So, looking for something to design I whipped up what I think is a little b... | [
"ikea",
"earrings",
"earring",
"hanger",
"skadis",
"earringholder",
"ikeaskadis",
"skadisikea",
"dangleearrings",
"earringstorage",
"skadismount"
] | Hobby & Makers > Organizers | [
"372692/images/image_1_compressed.jpg",
"372692/images/image_2_compressed.jpg",
"372692/images/image_3_compressed.jpg",
"372692/images/image_4_compressed.jpg"
] | [
"372692/stls/skadis-earring-holder-10-slot.stl",
"372692/stls/skadis-earring-holder-5-slots.stl"
] | CC-BY | https://www.printables.com/model/372692 | data_0032.tar |
1620268 | SKADIS Multi-Board Mount System | <p>Allows vertical and horizontal connection of multiple panels into one larger wall layout.</p><p>Includes:</p><p> </p><ul><li><p>25 Boards</p></li></ul><p></p><figure class="image image_resized image-style-align-center" data-width="338.688px" style="width: 338.688px; --image-width: 338.688px;"><img class="editor... | [
"wall",
"mount",
"modular",
"pegboard",
"skadis"
] | Hobby & Makers > Organizers | [
"1620268/images/image_1_compressed.jpg",
"1620268/images/image_2_compressed.jpg",
"1620268/images/image_3_compressed.jpg",
"1620268/images/image_4_compressed.jpg",
"1620268/images/image_5_compressed.jpg"
] | [
"1620268/stls/10mm.stl",
"1620268/stls/120x120.stl",
"1620268/stls/120x160.stl",
"1620268/stls/120x200.stl",
"1620268/stls/120x240.stl",
"1620268/stls/120x80.stl",
"1620268/stls/15mm.stl",
"1620268/stls/160x120.stl",
"1620268/stls/160x160.stl",
"1620268/stls/160x200.stl",
"1620268/stls/160x240.s... | CC-BY | https://www.printables.com/model/1620268 | data_0032.tar |
505197 | Skadis Notes | <p>Holder for 76x76mm notes/sticky notes for Ikea Skadis</p> | [
"skadis",
"skadisikea",
"skadisholder"
] | Hobby & Makers > Organizers | [
"505197/images/image_1_compressed.jpg",
"505197/images/image_2_compressed.jpg"
] | [
"505197/stls/SkadisNotes.stl"
] | CC0 | https://www.printables.com/model/505197 | data_0032.tar |
839081 | Skadis Notes 90x90 | resize to fit bigger notes | [
"ikea",
"skadis",
"notes"
] | Hobby & Makers > Organizers | [
"839081/images/image_1_compressed.jpg"
] | [
"839081/stls/SkadisNotes_90x90.stl"
] | CC0 | https://www.printables.com/model/839081 | data_0032.tar |
409682 | Skadis one sided paper towel holder | <p>Sturdy and simple one sided holder for paper towel rolls that is designed to fit on IKEA Skadis pegboard.</p><h3>Print instructions:</h3><p>Print without supports. 3 parts are needed: the base and two of each of the end pieces, pick depending on desired length. Useful length listed on each, so add up those 2 lengths... | [
"ikea",
"pegboard",
"skadis",
"toiletpaperholder",
"papertowel",
"ikeaskadis",
"skadisikea",
"papertowelholder",
"papertoweldispenser",
"pegboardholder",
"papertowlholder",
"skadisholder",
"toiletrollholder",
"papertowelrollholder"
] | Hobby & Makers > Organizers | [
"409682/images/image_1_compressed.jpg",
"409682/images/image_2_compressed.jpg",
"409682/images/image_3_compressed.jpg"
] | [
"409682/stls/SkadisPaperTowelHolder-Base.stl",
"409682/stls/SkadisPaperTowelHolder-RollA-100.stl",
"409682/stls/SkadisPaperTowelHolder-RollA-178.stl",
"409682/stls/SkadisPaperTowelHolder-RollB-0.stl",
"409682/stls/SkadisPaperTowelHolder-RollB-102.stl",
"409682/stls/SkadisPaperTowelHolder-RollB-62.stl"
] | CC0 | https://www.printables.com/model/409682 | data_0032.tar |
110079 | Skadis Organiser - pliers | <p>The ends fit with a good friction fit from my printer, otherwise, a dab of superglue should help. No supports are needed if ends are printed flat and the main body is printed on end.</p> | [
"ikea",
"organiser",
"pliers",
"skadis",
"ikeaskadis",
"skadisikea"
] | Hobby & Makers > Organizers | [
"110079/images/image_1_compressed.jpg"
] | [
"110079/stls/Left End.stl",
"110079/stls/Main Body.stl",
"110079/stls/Right end.stl"
] | CC-BY | https://www.printables.com/model/110079 | data_0032.tar |
279220 | Skadis paint bottle holders | <p>Space efficient Skadis paint bottle holders that create honeycomb layout on the wall and perfectly tessellate.</p><p>They are made for four groups of paint bottles:</p><ul><li>Paint dropper bottles as produced by Vallejo, Army Painter, AK, Reaper, etc.</li><li>Citadel paint bottles </li><li>Oilpaints such as Ab... | [
"organizer",
"citadel",
"storage",
"paint",
"skadis",
"vallejo",
"armypainter",
"reaper",
"paintbottle",
"citadelpaint",
"reaperpaint",
"vallejocolor",
"akinteractive",
"oilpaint",
"abteilung502"
] | Hobby & Makers > Organizers | [
"279220/images/image_1_compressed.jpg",
"279220/images/image_2_compressed.jpg",
"279220/images/image_3_compressed.jpg"
] | [
"279220/stls/SkadisCitadelPaintHolder-EvenRows.stl",
"279220/stls/SkadisCitadelPaintHolder-OddRows.stl",
"279220/stls/SkadisDropperPaintHolder-EvenRows.stl",
"279220/stls/SkadisDropperPaintHolder-OddRows.stl",
"279220/stls/SkadisLargePaintHolder-EvenRows.stl",
"279220/stls/SkadisLargePaintHolder-OddRows.s... | CC0 | https://www.printables.com/model/279220 | data_0032.tar |
103117 | Skadis paper roll holder | <p>This is a Skadis compatible paper roll holder. This will fit different toilet paper rolls or paper towel rolls.</p><p>To hang this you will need the “Skadis_Universal_Hook.stl” from https://www.thingiverse.com/thing:2853257/files</p><p>This hangs next to my printer and is useful when I need paper to clean the bed.</... | [] | 3D Printers > Accessories | [
"103117/images/image_1_compressed.jpg",
"103117/images/image_2_compressed.jpg"
] | [
"103117/stls/Roll Holder.stl"
] | CC-BY | https://www.printables.com/model/103117 | data_0032.tar |
285956 | Skadis Paper Towel Holder Reinforced | Remix of MattCalls paper roll holder, added fillets for increased strength. Requires his universal hooks for mounting. | Download free 3D printable STL models | [
"ikea",
"paper",
"roll",
"skadis",
"remix",
"ikeaskadis",
"papertowelholder"
] | Household > Office | [
"285956/images/image_1_compressed.jpg"
] | [
"285956/stls/Roll Holder V2.stl"
] | CC-BY | https://www.printables.com/model/285956 | data_0032.tar |
1473739 | Skadis Pegboard, all sizes 80 to 360mm | <p>Tired of being limited to IKEA’s fixed SKÅDIS sizes?<br>Here’s the print your own version: fully parametric, resizable, wall-ready. </p><ul><li>Pick any size you want, 80 mm to 360 mm included</li><li>Standard 20 mm spacers stand-off</li><li>Countersunk mounting screw holes built-in</li><li>Need more sizes? Get... | [
"ikea",
"pegboard",
"skadis"
] | Hobby & Makers > Organizers | [
"1473739/images/image_1_compressed.jpg",
"1473739/images/image_2_compressed.jpg",
"1473739/images/image_3_compressed.jpg"
] | [
"1473739/stls/Skadis080x080.stl",
"1473739/stls/Skadis080x100.stl",
"1473739/stls/Skadis080x120.stl",
"1473739/stls/Skadis080x140.stl",
"1473739/stls/Skadis080x160.stl",
"1473739/stls/Skadis080x180.stl",
"1473739/stls/Skadis080x200.stl",
"1473739/stls/Skadis080x220.stl",
"1473739/stls/Skadis080x240.... | CC0 | https://www.printables.com/model/1473739 | data_0032.tar |
697765 | SKADIS Pen Holder Multi-Section Design | <p>A little less boxy style pen/pencil holder to attach to your IKEA Skadis pegboard. </p><p>Comes in 3 version with 2 and 3 dividers. </p><p>Requires glue or 3DGloop to attach the ‘peg hooks’ to the back. </p><p>Print without any supports or brim. </p> | [
"ikea",
"penholder",
"pegboard",
"pencilholder",
"skadis",
"pegboardmount",
"ikeaskadis"
] | Household > Office | [
"697765/images/image_1_compressed.jpg",
"697765/images/image_2_compressed.jpg",
"697765/images/image_3_compressed.jpg"
] | [
"697765/stls/Peg Hook v1.stl",
"697765/stls/Pen Holder 2Secs v1.stl",
"697765/stls/Pen Holder 3Secs v1.stl",
"697765/stls/Pen Holder v1.stl"
] | CC0 | https://www.printables.com/model/697765 | data_0032.tar |
198633 | Skadis plant holder | <p>I made this small mount to attach some plants to my Skadis-boards. It works fine for these small pots you get with the small plants you can buy at Ikea.</p><p>I'm not sure if every Ikea in the world has the same pots, so I just uploaded one that fits into the holder.</p> | [
"skadis",
"deskplanter",
"ikeaskadis"
] | Hobby & Makers > Organizers | [
"198633/images/image_1_compressed.jpg",
"198633/images/image_2_compressed.jpg",
"198633/images/image_3_compressed.jpg"
] | [
"198633/stls/plant_holder.stl",
"198633/stls/pot.stl"
] | CC-BY | https://www.printables.com/model/198633 | data_0032.tar |
514383 | SKADIS Plant Pot Stylized | <p>A holder for Ø60mm pots which fits nicely onto any IKEA SKADIS board.</p> | [
"pot",
"decoration",
"ikea",
"plant",
"plantpot",
"skadis",
"ikeaskadis",
"decorative",
"skadisikea",
"skadisholder",
"skadismount"
] | Art & Design > Wall-mounted | [
"514383/images/image_1_compressed.jpg",
"514383/images/image_2_compressed.jpg"
] | [
"514383/stls/Skadis_Pot_v2.stl"
] | CC-BY | https://www.printables.com/model/514383 | data_0032.tar |
279729 | SKADIS Plastic hammer holder | <p>Plastic hammer holder Ø 27 mm Holder for Ikea Skadis </p> | [
"skadis",
"ikeaskadis",
"skadisikea",
"skadisholder",
"skadismount"
] | Hobby & Makers > Organizers | [
"279729/images/image_1_compressed.jpg",
"279729/images/image_2_compressed.jpg",
"279729/images/image_3_compressed.jpg"
] | [
"279729/stls/Holder Skadis.stl"
] | CC-BY | https://www.printables.com/model/279729 | data_0032.tar |
953096 | Skadis Plier Holder (Zangen-Halter) | <p>A Plier holder for Ikea Skadis with different angles of the triangular form (40°/50°/60°) to hold different forms of pliers.</p><p>It can hold one plier.</p><p>On the Picture: Blue Plier on 40° holder, Red Plier on 60° holder.</p> | [
"ikea",
"pliers",
"skadis",
"pliersholder",
"ikeaskadis",
"zange",
"zangenhalter"
] | Household > Other House Equipment | [
"953096/images/image_1_compressed.jpg",
"953096/images/image_2_compressed.jpg",
"953096/images/image_3_compressed.jpg"
] | [] | CC0 | https://www.printables.com/model/953096 | data_0032.tar |
418555 | SKADIS plier holder no supports | <p>I designed this plier holder to print without supports.</p><p>the width in the files is the smallest between the arms of the holder.</p><p>If you need extra widths I can upload them.</p> | [
"holder",
"supportless",
"pliers",
"skadis",
"nosupport"
] | Hobby & Makers > Organizers | [
"418555/images/image_1_compressed.jpg"
] | [
"418555/stls/SKADIS_plier_holder_30mm.stl",
"418555/stls/SKADIS_plier_holder_35mm.stl",
"418555/stls/SKADIS_plier_holder_38mm.stl",
"418555/stls/SKADIS_plier_holder_41mm.stl",
"418555/stls/SKADIS_plier_holder_42mm.stl",
"418555/stls/SKADIS_plier_holder_43mm.stl",
"418555/stls/SKADIS_plier_holder_45mm.st... | CC-BY | https://www.printables.com/model/418555 | data_0032.tar |
783310 | Skadis Pliers Compact Holder | <p>Printed on Ender 3V2<br>Upright with supports as needed for the hook</p><p>Perimeter of 4 and infill of 40% </p><p>Used PLA+</p> | [
"organization",
"skadis",
"pliersholder",
"skadisikea"
] | Hobby & Makers > Organizers | [
"783310/images/image_1_compressed.jpg",
"783310/images/image_2_compressed.jpg",
"783310/images/image_3_compressed.jpg",
"783310/images/image_4_compressed.jpg"
] | [
"783310/stls/Skadis Pliers Compact.stl"
] | CC0 | https://www.printables.com/model/783310 | data_0032.tar |
831969 | Skadis Pliers Holder | <p>Simple as possible Ikea Skadis plier holder. Made to fit just one cheap chinese side cutter.</p> | [
"holder",
"cutter",
"skadis",
"cheap",
"cutters",
"china",
"skadisikea"
] | Hobby & Makers > Tools | [
"831969/images/image_1_compressed.jpg",
"831969/images/image_2_compressed.jpg"
] | [
"831969/stls/SkadisCutterHolder.stl"
] | CC-BY | https://www.printables.com/model/831969 | data_0032.tar |
305269 | SKADIS Porte clé USB, SD et Mirco SD / SKADIS key holder USB, SD and Micro SD | <p>FR: Il faudra bien télécharger les 4 crochets ( 1 2 3 4 ) pour les collers sur le support ( il y à des détrompeurs sous les crochets et le support ( ou bien le Gcode )</p><p>EN: It will be necessary to download the 4 hooks (1 2 3 4) to stick them on the support (there are polarizers under the hooks and the support (... | [
"holder",
"support",
"key",
"usb",
"sdcard",
"microsd",
"skadis",
"ikeaskadis"
] | Gadgets > Computers | [
"305269/images/image_1_compressed.jpg",
"305269/images/image_2_compressed.jpg",
"305269/images/image_3_compressed.jpg",
"305269/images/image_4_compressed.jpg",
"305269/images/image_5_compressed.jpg",
"305269/images/image_6_compressed.jpg"
] | [
"305269/stls/Crochet 1.stl",
"305269/stls/Crochet 2.stl",
"305269/stls/Crochet 3.stl",
"305269/stls/Crochet 4.stl",
"305269/stls/Socle support.stl"
] | CC-BY | https://www.printables.com/model/305269 | data_0032.tar |
377627 | skadis porte câble / skadis cable holder | <p>FR: Sur ce porte câble il y à 7 fentes de 5mm ( USB 2.0, micro USB, USB C, ... ) et 3 fentes de 7mm ( USB 3.0 type A, HDMI, DVI, VGA, XLR, ... ).</p><p>EN: On this cable holder there are 7 5mm slots (USB 2.0, micro USB, USB C, etc.) and 3 7mm slots (USB 3.0 type A, HDMI, DVI, VGA, XLR, etc.).</p> | [
"ikea",
"cable",
"support",
"skadis",
"slot",
"cableholder",
"slots"
] | Hobby & Makers > Organizers | [
"377627/images/image_1_compressed.jpg",
"377627/images/image_2_compressed.jpg",
"377627/images/image_3_compressed.jpg",
"377627/images/image_4_compressed.jpg",
"377627/images/image_5_compressed.jpg"
] | [
"377627/stls/Porte_Cable.stl"
] | CC-BY | https://www.printables.com/model/377627 | data_0032.tar |
1373725 | Skadis Prusa spatula / scraper holder | <p>Just print it upright, no supports needed</p> | [
"holder",
"hanger",
"scraper",
"skadis",
"spatula",
"simple"
] | 3D Printers > Accessories | [
"1373725/images/image_1_compressed.jpg"
] | [
"1373725/stls/skadis_scraper.stl"
] | CC-BY | https://www.printables.com/model/1373725 | data_0032.tar |
20963 | Skadis Pull Down Drawer | <p>A print in place Skadis pull down drawer, meant to be used on the standard 5mm thick skadis pegboard panels</p>
<p>You can put small things here especially bolts and nuts and when you pull them down, they sure going to slide forward and just pick them up with your fingers quite easily. Don't really have to buy those... | [] | Hobby & Makers > Organizers | [
"20963/images/image_1_compressed.jpg"
] | [
"20963/stls/40mm-pull-down.stl",
"20963/stls/80mm-pull-down.stl"
] | CC-BY | https://www.printables.com/model/20963 | data_0032.tar |
354760 | Skadis Rollenhalter | <p>Die beiden Halter lassen sich ohne Stützmaterial drucken. In die vordere Aufnahme kommt ein Rundmaterial von 12mm.</p> | [] | 3D Printers > Accessories | [
"354760/images/image_1_compressed.jpg",
"354760/images/image_2_compressed.jpg",
"354760/images/image_3_compressed.jpg"
] | [
"354760/stls/Skardis_Rollenhalter.stl"
] | GPL2.0 | https://www.printables.com/model/354760 | data_0032.tar |
718528 | Skadis Ruler Holder 5mm | <p>This is a remix from 2 models: I mixed board mount from hooks i like and ruler holder part from another model. Hook is designed not to fall out of place. Ruler mount is slightly decreased to 5mm.</p><p>I print it with 0.1mm layer with no supports on the flat side.</p><p>Don't forget to upload your makes!</p> | [
"mount",
"ruler",
"skadis"
] | Hobby & Makers > Organizers | [
"718528/images/image_1_compressed.jpg",
"718528/images/image_2_compressed.jpg",
"718528/images/image_3_compressed.jpg"
] | [
"718528/stls/Skadis Ruler Holder 5mm.stl"
] | CC-BY | https://www.printables.com/model/718528 | data_0032.tar |
280608 | SKADIS scraper holder | <p>FIRST THING FIRST<br><br>This is a remix from Thingiverse from CSD_Salzburg<br><a href="https://www.thingiverse.com/thing:2853261">https://www.thingiverse.com/thing:2853261</a><br><br>THIS IS One of the best setup for SKADIS for thoses reasons:<br>- Most of the thing print without support<br>- the hook are printed s... | [
"creality",
"scraper",
"skadis",
"scraperholder"
] | 3D Printers > Accessories | [
"280608/images/image_1_compressed.jpg",
"280608/images/image_2_compressed.jpg"
] | [
"280608/stls/Skadis scraper.stl",
"280608/stls/Skadis_Universal_Hook.stl"
] | CC-BY | https://www.printables.com/model/280608 | data_0032.tar |
280157 | Skadis Scraper Peg | <p>Simple one hole peg for hanging a paint scraper on IKEA Skadis</p> | [
"scraper",
"ikeaskadis",
"skadisikea"
] | 3D Printers > Accessories | [
"280157/images/image_1_compressed.jpg",
"280157/images/image_2_compressed.jpg"
] | [
"280157/stls/Skadis Scraper Peg.stl"
] | CC-BY | https://www.printables.com/model/280157 | data_0032.tar |
165267 | SKADIS Screwdriver Holder | <p>Designed to fit a Stanley changeable head screwdriver, your mileage may vary. Make sure to check the dimensions of your screwdriver against this model before printing! You can use TinkerCAD or some other quick modeling software.</p><p>There's no perfect way to orient this model on the print bed, since it's an awkwar... | [
"ikea",
"wallmount",
"pegboard",
"screwdriver",
"skadis",
"screwdriverholder",
"stanley",
"ikeaskadis"
] | Hobby & Makers > Tools | [
"165267/images/image_1_compressed.jpg"
] | [
"165267/stls/SKADIS Screwdriver Holder.stl"
] | CC0 | https://www.printables.com/model/165267 | data_0032.tar |
121329 | Skadis screwdriver rack | <p>This is a very simple screwdriver rack for IKEA Skadis pegboard. It requires two of my <a href="https://www.printables.com/model/119811-skadis-universal-peg">universal peg plates</a>. I designed the rack for the small Mastercraft screwdrivers I had but it should work with most similar types.</p><p>You can design you... | [
"ikea",
"holder",
"rack",
"screwdriver",
"skadis"
] | Hobby & Makers > Organizers | [
"121329/images/image_1_compressed.jpg"
] | [
"121329/stls/Screwdriver_3mm_shaft_x10_holder.stl"
] | CC-BY | https://www.printables.com/model/121329 | data_0032.tar |
110067 | Skadis sewing organiser - sewing machine bobbin holder | [
"ikea",
"thread",
"sewing",
"sewingmachine",
"skadis",
"bobbin",
"ikeaskadis",
"skadisikea"
] | Hobby & Makers > Organizers | [
"110067/images/image_1_compressed.jpg",
"110067/images/image_2_compressed.jpg",
"110067/images/image_3_compressed.jpg",
"110067/images/image_4_compressed.jpg"
] | [
"110067/stls/Back.stl",
"110067/stls/Bobbin box print in place.stl",
"110067/stls/Bobbin Hook.stl",
"110067/stls/catch.stl",
"110067/stls/Front.stl",
"110067/stls/Label.stl"
] | CC-BY | https://www.printables.com/model/110067 | data_0032.tar | |
304195 | Skadis Shelf + STEP | <p>Use this hook (just glue it in the recesses in the model) to hang this organizer on a Skadis board:</p><p>https://www.printables.com/model/304196-gps-skadis-hook-ng-step</p> | [
"shelf",
"skadis",
"ikeaskadis"
] | Hobby & Makers > Organizers | [
"304195/images/image_1_compressed.jpg"
] | [
"304195/stls/Skadis Shelf.stl"
] | CC-BY | https://www.printables.com/model/304195 | data_0032.tar |
277602 | Skadis shelf for hanging modular drawers | <p>Shelf for Ikea Skadis board capable of hanging modular drawers underneath. Several shelves can be put into a single continuous row and the T rails are compatible with <a href="https://www.printables.com/model/139570-fast-printing-modular-drawer-system-vase-mode">Modular drawer system by LR3DUK</a>.</p><p>Comes in ve... | [
"shelf",
"organizer",
"ikea",
"drawers",
"skadis"
] | Hobby & Makers > Organizers | [
"277602/images/image_1_compressed.jpg",
"277602/images/image_2_compressed.jpg"
] | [
"277602/stls/SKADIS-Shelf-160mm.stl",
"277602/stls/SKADIS-Shelf-160mmNoRails.stl",
"277602/stls/SKADIS-Shelf-240mm.stl",
"277602/stls/SKADIS-Shelf-240mmNoRails.stl",
"277602/stls/SKADIS-Shelf-80mm.stl",
"277602/stls/SKADIS-Shelf-80mmNoRails.stl"
] | CC0 | https://www.printables.com/model/277602 | data_0032.tar |
280311 | Skadis Shelves | <p>Shelf for Skadis board. Designed in 3 parts so you can easily use different colors. Short Shelf spans across 3 pegs and long shelf spans across 5 pegs. Pictures show stained wood PLA and black PLA.</p> | [
"skadis"
] | Hobby & Makers > Organizers | [
"280311/images/image_1_compressed.jpg",
"280311/images/image_2_compressed.jpg",
"280311/images/image_3_compressed.jpg"
] | [
"280311/stls/Long Skadis Shelf.stl",
"280311/stls/Short Skadis Shelf.stl",
"280311/stls/Skadis Shelf Long.stl",
"280311/stls/Skadis Shelf Short.stl",
"280311/stls/Skadis Shelf Side.stl"
] | CC0 | https://www.printables.com/model/280311 | data_0032.tar |
280606 | SKADIS side cutter (Plier) Holder | <p>FIRST THING FIRST<br><br>This is a remix from Thingiverse from CSD_Salzburg<br><a href="https://www.thingiverse.com/thing:2853261">https://www.thingiverse.com/thing:2853261</a><br><br>THIS IS One of the best setup for SKADIS for thoses reasons:<br>- Most of the thing print without support<br>- the hook are printed s... | [
"creality",
"filamentcutter",
"skadis",
"plier",
"pliersholder",
"sidecutter"
] | 3D Printers > Accessories | [
"280606/images/image_1_compressed.jpg",
"280606/images/image_2_compressed.jpg"
] | [
"280606/stls/Skadis side cutter.stl",
"280606/stls/Skadis_Universal_Hook.stl"
] | CC-BY | https://www.printables.com/model/280606 | data_0032.tar |
202650 | Skadis small tweezer holder | IKEA Skadis tweezer holder that can take 4 tweezers. | Download free 3D printable STL models | [] | Hobby & Makers > Organizers | [
"202650/images/image_1_compressed.jpg"
] | [
"202650/stls/Tweezer holder 4.stl"
] | CC-BY | https://www.printables.com/model/202650 | data_0032.tar |
602418 | Skadis small tweezer holder - T-Nut Mounting System | <p>Remix of a IKEA Skadis 4 tweezer holder but with the T-Nut Mounting System. For more information on the mounting system see <a href="https://www.printables.com/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb">/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb</a>.</p> | [
"holder",
"skadis",
"tweezers",
"skadistnut"
] | Hobby & Makers > Organizers | [
"602418/images/image_1_compressed.jpg",
"602418/images/image_2_compressed.jpg"
] | [
"602418/stls/Skadis 4 Tweezers Holder - T-Nut Mounting System.stl"
] | CC-BY | https://www.printables.com/model/602418 | data_0032.tar |
758097 | Skadis Solder Sucker Holder | <h4>Special design of the holder with stable mounting with T-clips for Solder Sucker.</h4><p> </p><p><strong>Compatible with solder sucker with about ø20mm</strong></p><ul><li>If you are looking for a special size, just write to me 😊</li></ul><h4><strong>Print Settings</strong></h4><p> </p><ul><li>Material:<... | [
"organizer",
"ikea",
"holder",
"mount",
"wallmount",
"organization",
"tools",
"toolholder",
"skadis",
"ikeaskadis",
"handcraft"
] | Hobby & Makers > Tools | [
"758097/images/image_1_compressed.jpg",
"758097/images/image_2_compressed.jpg",
"758097/images/image_3_compressed.jpg",
"758097/images/image_4_compressed.jpg",
"758097/images/image_5_compressed.jpg"
] | [
"758097/stls/Skadis Solder Sucker Holder.stl",
"758097/stls/T-Clip.stl"
] | CC-BY | https://www.printables.com/model/758097 | data_0032.tar |
122803 | Skadis soldering iron holder | <p>This is a simple soldering iron holder for the IKEA Skadis pegboard, using 1 of my <a href="https://www.printables.com/model/119811-skadis-universal-peg">universal peg plate</a>. You can always use the holder with a different pegboard system though if you design your own peg plate.</p><p>It should work with most cla... | [
"ikea",
"holder",
"iron",
"soldering",
"skadis"
] | Hobby & Makers > Organizers | [
"122803/images/image_1_compressed.jpg"
] | [
"122803/stls/Solder_iron_holder.stl"
] | CC-BY | https://www.printables.com/model/122803 | data_0032.tar |
456820 | Skadis Spirit Level Hook | <p>I remixed the model from Printuin to fit. My spirit level has a width of 24mm. The hook fits quite snugly into the Skadis, so be careful with don't breaking it.</p> | [
"organizer",
"tool",
"hook",
"level",
"spiritlevel",
"skadis"
] | Hobby & Makers > Organizers | [
"456820/images/image_1_compressed.jpg"
] | [
"456820/stls/skadis_spiritlevel_hook_24mm.stl"
] | CC0 | https://www.printables.com/model/456820 | data_0032.tar |
436074 | Skadis Spoolroller | <p>Wiedereinmal ein Skadis Filamentroller…</p><p>Die schon existierenden Modelle haben mir alle nicht gefallen, deshalb musste ein eigenes her. Passend für Spulen mit bis zu 100mm breite.</p><p>Ihr müsst jeweils einmal Rechts und einmal Links drucken. Den spacer einmal. Dieser wird nachher mit Sekundenkleber vorn... | [
"filamentspoolholder",
"spoolroller",
"skadis",
"ikeaskadis"
] | 3D Printers > Accessories | [
"436074/images/image_1_compressed.jpg",
"436074/images/image_2_compressed.jpg",
"436074/images/image_3_compressed.jpg",
"436074/images/image_4_compressed.jpg",
"436074/images/image_5_compressed.jpg"
] | [
"436074/stls/FilRoller_80mm_V1.stl",
"436074/stls/SkadisFillrollerLeft.stl",
"436074/stls/SkadisFillrollerRight.stl",
"436074/stls/SkadisFillroller_spacer.stl"
] | CC0 | https://www.printables.com/model/436074 | data_0032.tar |
626482 | Skadis Steel Wire Brush Hook | [
"ikea",
"skadis",
"ikeaskadis"
] | Hobby & Makers > Organizers | [
"626482/images/image_1_compressed.jpg",
"626482/images/image_2_compressed.jpg"
] | [
"626482/stls/skadis_crochet.stl"
] | CC0 | https://www.printables.com/model/626482 | data_0032.tar | |
774740 | Skadis Stiftehalter | <p>Vordere Reihe: 9,9 mm, hintere Reihe: 11,9 mm</p><p>Für die Aufhängung verwendet man am besten den hier: https://www.printables.com/de/model/323748-skadis-universal-hook </p> | [
"penholder",
"skadis"
] | Hobby & Makers > Organizers | [
"774740/images/image_1_compressed.jpg"
] | [
"774740/stls/Skadis - Stiftehalter.stl"
] | CC0 | https://www.printables.com/model/774740 | data_0032.tar |
527223 | Skadis Storage Bins | <p>Small storage bins 80mm wide for Ikea Skadis.</p><p>Supports are required for the hooks.</p><p>Normal version uses about 25g of filament, Beefy version uses around 34g.</p><p> </p><p>Edit 8/7/23, added a “Beefy” version with slightly thicker walls for heavier objects.</p> | [
"storage",
"bin",
"skadis",
"storagebin"
] | Hobby & Makers > Organizers | [
"527223/images/image_1_compressed.jpg"
] | [
"527223/stls/SkadisStorage.stl",
"527223/stls/SkadisStorageBeefy.stl"
] | CC-BY | https://www.printables.com/model/527223 | data_0032.tar |
377655 | Skadis support de pied à coulisse / Skadis caliper holder | <p>FR: Un petit support de pied à coulisse très simple, compatible aussi pour le digital ( je préfère le mécanique ;) ).</p><p>EN: A small, very simple caliper support, also compatible for digital (I prefer mechanical ;) ).</p> | [
"ikea",
"holder",
"skadis",
"caliper",
"single",
"simple",
"ikeaskadis",
"piedacoulisse"
] | Hobby & Makers > Organizers | [
"377655/images/image_1_compressed.jpg",
"377655/images/image_2_compressed.jpg"
] | [
"377655/stls/Pied_a_coulis.stl"
] | CC-BY | https://www.printables.com/model/377655 | data_0032.tar |
256896 | Skadis T-Clip System | <p>I have been fascinated recently by the ways that the 3D printing community has devised to attach printed parts to IKEA Skadis board. Skadis slots enable 3D-printed parts to attach much more securely and reliably than the holes in regular pegboard. The community has created some positively genius ways to interface wi... | [
"parametric",
"ikea",
"wallmounted"
] | Household > Other House Equipment | [
"256896/images/image_1_compressed.jpg",
"256896/images/image_2_compressed.jpg"
] | [
"256896/stls/Example Attached Part.stl",
"256896/stls/T-Clip for Painted Skadis.stl",
"256896/stls/T-Clip for Unpainted Skadis.stl"
] | CC-BY | https://www.printables.com/model/256896 | data_0032.tar |
277917 | Skadis T-Nut hooks (M3) | <p>This is a simple hook to use with Skådis pegboards and M3 T-nuts (<a href="https://www.printables.com/de/model/273165-direct-screw-in-t-nuts-for-ikea-skadis-pegboards">please see</a>).</p><p>Designed for M3 ISO 14583 screws. Needs to print with support under the stabilizers. (At least on my printer, there is no need... | [
"ikea",
"freecad",
"ikeaskadis",
"skadistnut"
] | Hobby & Makers > Organizers | [
"277917/images/image_1_compressed.jpg",
"277917/images/image_2_compressed.jpg"
] | [
"277917/stls/Skadis-Haken-big.stl",
"277917/stls/Skadis-Haken-mid.stl",
"277917/stls/Skadis-Haken.small.stl"
] | CC-BY | https://www.printables.com/model/277917 | data_0032.tar |
228663 | Skadis T-Nuts Mounting System for Ikea Skadis Pegboards | <p>These are <strong>T-Nuts for </strong><a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://www.ikea.com/us/en/p/skadis-pegboard-white-10321618/"><strong>IKEA SKÅDIS </strong></a><strong>pegboards that make installing accessories on your pegboard much easier</strong>. You no longer ... | [
"nut",
"ikea",
"screws",
"mount",
"screw",
"pegboard",
"skadis",
"tnut",
"pegboardmount",
"installation",
"ikeaskadis",
"tnuts",
"m2",
"m25",
"ikeauppspel",
"uppspel",
"6d6178",
"skadistnut"
] | Hobby & Makers > Organizers | [
"228663/images/image_1_compressed.jpg",
"228663/images/image_10_compressed.jpg",
"228663/images/image_11_compressed.jpg",
"228663/images/image_12_compressed.jpg",
"228663/images/image_2_compressed.jpg",
"228663/images/image_3_compressed.jpg",
"228663/images/image_4_compressed.jpg",
"228663/images/imag... | [
"228663/stls/Alignment Guide M2.5.stl",
"228663/stls/Alignment Guide M2.stl",
"228663/stls/Alignment Guide Side Horizontal.stl",
"228663/stls/Alignment Guide Side Vertical.stl",
"228663/stls/Alignment Guide Top.stl",
"228663/stls/Skadis T-Nut M2.5.stl",
"228663/stls/Skadis T-Nut M2.stl",
"228663/stls/... | CC-BY | https://www.printables.com/model/228663 | data_0032.tar |
308905 | Skadis Table Clamp (Long) | <p>Just a quick remix of the <a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://www.thingiverse.com/thing:4719357">Pegboard table clamp</a> and the long version of <a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://www.thingiverse.com/thing:16730... | [
"thingiverse"
] | Household > Office | [
"308905/images/image_1_compressed.jpg",
"308905/images/image_2_compressed.jpg",
"308905/images/image_3_compressed.jpg",
"308905/images/image_4_compressed.jpg",
"308905/images/image_5_compressed.jpg"
] | [
"308905/stls/clamp_pegboard_long.stl",
"308905/stls/clamp_protector.stl",
"308905/stls/clamp_protector_0.6_loose.stl",
"308905/stls/thread_and_knurling_knob_longHD.stl"
] | CC-BY | https://www.printables.com/model/308905 | data_0032.tar |
42930 | Skadis Tamiya Cement etc holder | <p>Holder for Tamiya cement etc square bottles.</p>
<h3>Print instructions</h3><h3>Category: Art Summary</h3>
<p>Holder for Tamiya cement etc square bottles.</p>
<h3> Print Settings</h3>
<p><strong>Printer Brand:</strong> Prusa</p>
<p><strong>Printer:</strong> i3 MK2.5</p>
<p><strong>Rafts:</strong> No</p>
<p><strong>S... | [
"skadis",
"thingiverse",
"ikeaskadis"
] | Hobby & Makers > Organizers | [
"42930/images/image_1_compressed.jpg",
"42930/images/image_2_compressed.jpg",
"42930/images/image_3_compressed.jpg"
] | [
"42930/stls/skadis_tamiya_cement.stl"
] | CC-BY | https://www.printables.com/model/42930 | data_0032.tar |
539568 | Skadis Tape Hooks | Tape hangers/hooks for the IKEA Skadis pegboard. | Download free 3D printable STL models | [
"hook",
"hanger",
"pegboard",
"skadis"
] | Hobby & Makers > Organizers | [
"539568/images/image_1_compressed.jpg"
] | [
"539568/stls/skadis_tape_hook_40.stl",
"539568/stls/skadis_tape_hook_50.stl",
"539568/stls/skadis_tape_hook_60.stl"
] | CC0 | https://www.printables.com/model/539568 | data_0032.tar |
121299 | Skadis Tape Measure Holder | <p>This was printed with a 0.6mm nozzle, & 0.35mm layer height.</p> | [
"skadis"
] | Hobby & Makers > Organizers | [
"121299/images/image_1_compressed.jpg"
] | [
"121299/stls/skadis-measure-tape.stl"
] | CC-BY | https://www.printables.com/model/121299 | data_0032.tar |
830272 | Skadis top shelf | <p>Skadis top shelf. </p><p>Scale on Z axis to a required length.</p><p>Print on a side.</p><p> </p><p>Open Source & Public Domain - free forever, no strings attached.</p><p><a href="https://cad.onshape.com/documents/5c7bf14fec2c84bd432613c5/w/073be706c6109f09ac5cf576/e/3e910698981406a73ab926e2?renderMode... | [
"skadis",
"skadisikea",
"skadisholder",
"skadisshelf"
] | Household > Office | [
"830272/images/image_1_compressed.jpg",
"830272/images/image_2_compressed.jpg"
] | [
"830272/stls/skadis_top_shelf.stl"
] | CC0 | https://www.printables.com/model/830272 | data_0032.tar |
297346 | Skadis Tray (Skadis Schale) | <p>The FreeCAD file allows to generate trays with variable size. The part is mounted to the scadis-board with 3 mm screws and direct-screw-in-t-nuts.<br>The <i><strong>Parameter</strong></i> object has:</p><figure class="table"><table><tbody><tr><td>ddHeight</td><td>Height of the tray-part</td></tr><tr><td>ddDepth</td>... | [
"freecad",
"ikeaskadis",
"madewithfreecad",
"skadistnut"
] | Hobby & Makers > Organizers | [
"297346/images/image_1_compressed.jpg",
"297346/images/image_2_compressed.jpg"
] | [
"297346/stls/Schale_3-80-30.stl"
] | CC-BY | https://www.printables.com/model/297346 | data_0032.tar |
167766 | SKADIS TS100 Soldering Iron Mount | <p>Remix of Yuri's TS100 wall mount for SKADIS pegboard. Used the hooks from <a href="https://www.thingiverse.com/bjorntm">bjorntm</a>'s Thingiverse design <a href="https://www.thingiverse.com/thing:3911500/files"><i>Stanley Wirestripper holder for Skadis</i></a><i>.</i></p><p>Printed in Overture PETG, PLA may work. Us... | [
"wallmount",
"soldering",
"pegboard",
"ts100",
"solder",
"skadis",
"solderingiron"
] | Hobby & Makers > Tools | [
"167766/images/image_1_compressed.jpg"
] | [
"167766/stls/SKADIS TS100 Soldering Iron Mount.stl"
] | CC0 | https://www.printables.com/model/167766 | data_0032.tar |
91256 | Skadis tweezer holder | <p>Tweezer holder for the Ikea skadis pegboard system.</p><p>Original OnShape file available here <a href="https://cad.onshape.com/documents/a23dd4002928da9978ebafd8/w/d15acd308e77d01db89f5ccf/e/2e32cb14af912c3bb6e348b6">https://cad.onshape.com/documents/a23dd4002928da9978ebafd8/w/d15acd308e77d01db89f5ccf/e/2e32cb14af9... | [
"thingiverse"
] | Hobby & Makers > Organizers | [
"91256/images/image_1_compressed.jpg",
"91256/images/image_2_compressed.jpg",
"91256/images/image_3_compressed.jpg"
] | [
"91256/stls/Tweezer holder.stl"
] | CC-BY | https://www.printables.com/model/91256 | data_0032.tar |
474197 | Skadis Tweezer Rack | Just needed the small ones for my tweezers, so remix the original | Download free 3D printable STL models | [] | Hobby & Makers > Tools | [
"474197/images/image_1_compressed.jpg"
] | [
"474197/stls/Skadis Tweezer Rack modified.stl"
] | CC0 | https://www.printables.com/model/474197 | data_0032.tar |
662953 | SKADIS Tweezers Holder | <p>This is a holder for up to ten tweezers and optionally one additional cross tweezer. I found no holder which is mounted vertically to the wall and was suitable for my set of ten SMD tweezers, which you can find easily in the common online stores. An additional cross tweezer can be placed at the front side as seen on... | [
"ikea",
"skadis",
"vertical",
"tweezers",
"tweezersholder",
"tweezerholder",
"ikeaskadis",
"skadisholder",
"skadishook",
"skadismount",
"skadistnut"
] | Hobby & Makers > Organizers | [
"662953/images/image_1_compressed.jpg"
] | [
"662953/stls/tweezer_holder_hook_10_bottom.stl",
"662953/stls/tweezer_holder_hook_10_top.stl",
"662953/stls/tweezer_holder_hook_10_top_cross.stl",
"662953/stls/tweezer_holder_hook_6_bottom.stl",
"662953/stls/tweezer_holder_hook_6_top.stl",
"662953/stls/tweezer_holder_hook_6_top_cross.stl",
"662953/stls/... | CC-BY | https://www.printables.com/model/662953 | data_0032.tar |
323748 | skadis universal hook | <p>Skadis universal hook.</p><p>Thiner than the orignal one. It's doesn't enter into my skadiss hole.</p><p>The Freecad model is parametric and could be modified.</p><p> </p> | [
"ikea",
"skadis",
"ikeaskadis"
] | Hobby & Makers > Organizers | [
"323748/images/image_1_compressed.jpg",
"323748/images/image_2_compressed.jpg",
"323748/images/image_3_compressed.jpg"
] | [
"323748/stls/scadis-hook.stl"
] | CC0 | https://www.printables.com/model/323748 | data_0032.tar |
183085 | SKADIS Universal Hook - base and modified hooks | <p>I had to slightly modify the filets on CSD_Salzburg's excellent SKADIS Universal Hook system, as on my particular Skadis they were a tad loose.</p><p>Included are STEP files for a hook with my modified filets, a hook without filets so you you can make your own, and a base so you can make your own things.</p><p>Hopef... | [
"ikeahack",
"thingiverse",
"ikeaskadis",
"csdsalzburg"
] | Hobby & Makers > Tools | [
"183085/images/image_1_compressed.jpg",
"183085/images/image_2_compressed.jpg"
] | [
"183085/stls/Hook_-_Modified_Filets.stl",
"183085/stls/Hook_-_No_Filets.stl",
"183085/stls/large_display_Hook_-_No_Filets_183085.stl",
"183085/stls/Skadis_Base.stl"
] | CC-BY | https://www.printables.com/model/183085 | data_0032.tar |
119811 | Skadis universal peg | <p>This universal peg is used in a few tool holders and organizers that I designed for my IKEA Skadis pegboard. They will require supports for the hook. For a good fit in the peg holes, I don't clean the supports completely which leaves a bit more friction. Whittle down if it's a bit too tight.</p><p>The reason for a s... | [
"ikea",
"pegboard",
"skadis"
] | Hobby & Makers > Organizers | [
"119811/images/image_1_compressed.jpg"
] | [
"119811/stls/Backing peg.stl",
"119811/stls/Spacer.stl"
] | CC-BY | https://www.printables.com/model/119811 | data_0032.tar |
202600 | SKADIS USB & SD Card | würde über arbeitet weg usb stick | Download free 3D printable STL models | [] | Hobby & Makers > Tools | [
"202600/images/image_1_compressed.jpg"
] | [
"202600/stls/Skadis_USB_holder.stl"
] | CC0 | https://www.printables.com/model/202600 | data_0032.tar |
1079757 | Skadis USB & SD holder | <p>IKEA Skadis USB and SD card holder with a little tray for pendrive caps for example.<br>5 USB and 5 SD card.<br>The tray part bottom is also in angle like the top face :/<br>Printed it with 15% infill, with support. Maybe I will do a non support version in the future.</p> | [
"tray",
"sdcard",
"sdcardholder",
"usbholder",
"skadis",
"skadisikea",
"skadisholder",
"skadisaccessories"
] | Hobby & Makers > Tools | [
"1079757/images/image_1_compressed.jpg"
] | [
"1079757/stls/Skadis USB & SD car holder 5-5.stl"
] | CC-BY | https://www.printables.com/model/1079757 | data_0032.tar |
318115 | Skadis USB+SD holder | <p>Small holder for 5 USB stick and 4 SD card. </p><p>The hook system was borrowed from dtphantom holder: <a href="https://www.printables.com/pl/model/284867-flash-drive-and-sd-card-holder-for-skadis">https://www.printables.com/pl/model/284867-flash-drive-and-sd-card-holder-for-skadis</a></p><p>*UPDATE*</p><p>I up... | [
"usb",
"sdcard",
"sdcardholder",
"usbholder",
"skadis",
"ikeaskadis"
] | Household > Office | [
"318115/images/image_1_compressed.jpg",
"318115/images/image_2_compressed.jpg"
] | [
"318115/stls/Bigger USB slots.stl",
"318115/stls/holder.stl",
"318115/stls/hook.stl"
] | CC-BY | https://www.printables.com/model/318115 | data_0032.tar |
265053 | Skadis Vallejo 50mm Bottles 200ml Holder | <p>This is for Ikea Skadis to organize even the bigger Bottles like the 200ml (Thinner,Cleaner, e.g.) As I was searching for such Holder and didn't find any, I created some. Now I have all Types clean at the wall mounted ready for picking it, when needed without a mess on Desktop.</p> | [
"ikea",
"holder",
"skadis",
"vallejo",
"airbrushbottle",
"vallejoholder"
] | Hobby & Makers > Organizers | [
"265053/images/image_1_compressed.jpg"
] | [
"265053/stls/Vallejo 50mm Halter v5.stl"
] | CC0 | https://www.printables.com/model/265053 | data_0032.tar |
242089 | Skadis Webcam Mount | <p>A Skadis Webcam Mount for webcams with ¼" UNC thread. </p><p>Print the Screw with 0,1 mm Layerhight, without supports.</p><p>The mounts are printed with 0,2mm Layerhight and supports.</p> | [
"cameramount",
"skadis",
"webcammount"
] | 3D Printers > Accessories | [
"242089/images/image_1_compressed.jpg",
"242089/images/image_2_compressed.jpg",
"242089/images/image_3_compressed.jpg",
"242089/images/image_4_compressed.jpg",
"242089/images/image_5_compressed.jpg",
"242089/images/image_6_compressed.jpg",
"242089/images/image_7_compressed.jpg",
"242089/images/image_8... | [
"242089/stls/Skadis_Cam-Mount-Bottom.stl",
"242089/stls/Skadis_Cam-Mount-Screw.stl",
"242089/stls/Skadis_Cam-Mount-Top.stl",
"242089/stls/Skadis_Cam-Mount-Vertical.stl"
] | CC-BY | https://www.printables.com/model/242089 | data_0032.tar |
280159 | Skadis Wire Cutter Holder | <p>IKEA Skadis holder for a pair of wire cutters.</p> | [
"skadis",
"ikeaskadis",
"wirecutter",
"wirecutterholder"
] | 3D Printers > Accessories | [
"280159/images/image_1_compressed.jpg",
"280159/images/image_2_compressed.jpg"
] | [
"280159/stls/skadis cutter holder.stl"
] | CC-BY | https://www.printables.com/model/280159 | data_0032.tar |
174188 | SKADIS Xbox One Controller Holder | <p>An Xbox One controller holder for IKEA's SKADIS pegboard. Print on it's side with supports enabled. Step file included if you would like to modify it.</p> | [
"ikea",
"holder",
"mount",
"controller",
"pegboard",
"skadis",
"xbox",
"xboxcontroller",
"xboxone"
] | Gadgets > Video Games | [
"174188/images/image_1_compressed.jpg",
"174188/images/image_2_compressed.jpg"
] | [
"174188/stls/Skadis Xbox One Controller Holder.stl"
] | CC-BY | https://www.printables.com/model/174188 | data_0032.tar |
358538 | Skadis Xiaomi Electric Precision Screwdriver | Modell für Xiaomi Electric Precision Screwdriver, um ihn am Skadis zu befestigen. | Download free 3D printable STL models | [
"skadis"
] | Hobby & Makers > Tools | [
"358538/images/image_1_compressed.jpg"
] | [
"358538/stls/Xiaomi Halter v2.stl"
] | CC0 | https://www.printables.com/model/358538 | data_0032.tar |
413353 | Skadis Ziptie / brush Holder | <p>Skadis Ziptie / brush Holder </p><p>SKADIS DRZAK NA ŠTĚTEC</p> | [
"holder"
] | Hobby & Makers > Other Ideas | [
"413353/images/image_1_compressed.jpg",
"413353/images/image_2_compressed.jpg"
] | [
"413353/stls/STETEC_V2 v4.stl"
] | CC0 | https://www.printables.com/model/413353 | data_0032.tar |
721901 | Skadis : Deburring tool holder | <p>A deburring tool holder that mounts to an ikea Skadis pegboard. Easy to print ans uses the special pegs I designd. </p><p><a href="https://www.printables.com/model/721879-skadis-peg">https://www.printables.com/model/721879-skadis-peg</a> </p><p> </p> | [
"printinplace",
"toolholder",
"skadis",
"skadisikea",
"deburringtool"
] | Hobby & Makers > Organizers | [
"721901/images/image_1_compressed.jpg",
"721901/images/image_2_compressed.jpg"
] | [
"721901/stls/Skadis deburring tool holder.stl"
] | CC-BY | https://www.printables.com/model/721901 | data_0032.tar |
679919 | Skadis / Skådis - Fiskars scissor holder | <p>A scissor holder for the Skådis / Skadis system. Specifically for the Fiskars 21cm scissors.</p> | [
"holder",
"pegboard",
"skadis",
"scissors",
"scissorsholder"
] | Household > Other House Equipment | [
"679919/images/image_1_compressed.jpg"
] | [
"679919/stls/fiskars sax.stl"
] | CC0 | https://www.printables.com/model/679919 | data_0032.tar |
710044 | Skadis / Skådis - Holder for Tamiya Plastic Cement | <p>A holder for square bottles of Tamiya Plastic Cement. Fits the Skadis / Skådis system of pegboards.</p><p> </p><p>Print it with three perimeter walls and at least 15% infill to make sure that the pegs are structurally sound. Enable support to make them clean.</p> | [
"holder",
"skadis",
"tamiya",
"minipainting"
] | Tabletop Miniatures > Miniature Gaming Accessories | [
"710044/images/image_1_compressed.jpg"
] | [
"710044/stls/skadis - tamiya plastic cement holder.stl"
] | CC-BY | https://www.printables.com/model/710044 | data_0032.tar |
662076 | Skadis / Skådis - Plier holder | <p>A simple triangular structure that holds two pliers, and a lip to prevent them from falling off.<br> </p><p>I modeled the base on the caliper holder by Synthetic_Future, which in turn is based on Brian.Kuos model. After trying out a couple of different Skådis-holders I really like how this base connects to the ... | [
"pliers",
"skadis"
] | Household > Other House Equipment | [
"662076/images/image_1_compressed.jpg"
] | [
"662076/stls/plierskadis.stl"
] | CC0 | https://www.printables.com/model/662076 | data_0032.tar |
934057 | Skadis / Skådis Headphone holder | No supports | <p>Building on my redesigned foldable pegs, I created this headphone/headset holder using the same pegs. It prints vertically to ensure the arc remains smooth and visually appealing.</p><p>I've added a STEP file if anyone wants to remix it or let me know if you have any suggestions to improve the current design!<br><br... | [
"headphones",
"headset",
"headphoneholder",
"headphonehanger",
"headsethanger",
"headsethook",
"headsetmount",
"headsetholder",
"headsetbracket"
] | Hobby & Makers > Organizers | [
"934057/images/image_1_compressed.jpg",
"934057/images/image_2_compressed.jpg",
"934057/images/image_3_compressed.jpg",
"934057/images/image_4_compressed.jpg",
"934057/images/image_5_compressed.jpg",
"934057/images/image_6_compressed.jpg"
] | [
"934057/stls/Skådis_headset_holder.stl"
] | CC-BY | https://www.printables.com/model/934057 | data_0032.tar |
934033 | Skadis / Skådis Pliers Holder | No Supports | <p>For those who have pliers from different tool manufacturers, it's often a challenge to organize and store them efficiently. This plier holder for IKEA SKÅDIS solves this problem by offering simple and versatile storage for all your pliers, regardless of the manufacturer.</p><p>The triangular-shaped 'shelf' where the... | [
"pliers",
"skadis",
"plier",
"pliersholder",
"skadisikea",
"pliershanger",
"skadisholder",
"plierholder",
"pliersrack"
] | Hobby & Makers > Organizers | [
"934033/images/image_1_compressed.jpg",
"934033/images/image_2_compressed.jpg",
"934033/images/image_3_compressed.jpg"
] | [
"934033/stls/Skådis_pliers_holder.stl"
] | CC-BY | https://www.printables.com/model/934033 | data_0032.tar |
934041 | Skadis / Skådis Thread Holder | <p>Let go of the traditional way of storing sewing accessories in the classic cookie tin and embrace the organizing power of this thread holder. Now you can conveniently sort your thread spools by color and size, providing both functionality and aesthetics to your sewing corner. Each holder has the capacity to accommod... | [
"thread",
"threads",
"skadis",
"skadisikea",
"threadspool",
"skadisholder"
] | Hobby & Makers > Organizers | [
"934041/images/image_1_compressed.jpg",
"934041/images/image_2_compressed.jpg",
"934041/images/image_3_compressed.jpg",
"934041/images/image_4_compressed.jpg",
"934041/images/image_5_compressed.jpg"
] | [
"934041/stls/Skådis_thread_holder.stl"
] | CC-BY | https://www.printables.com/model/934041 | data_0032.tar |
779428 | SkadisContinuousShelf-L | <p>I use the continuous shelf to put my Cobi tank models on display. Depth is now at about 17.5 cm.</p> | [
"shelf",
"ikea",
"skadis"
] | Hobby & Makers > Organizers | [
"779428/images/image_1_compressed.jpg",
"779428/images/image_2_compressed.jpg"
] | [
"779428/stls/SkadisContinuousShelf-L-Bracket.stl",
"779428/stls/SkadisContinuousShelf-L.stl"
] | CC0 | https://www.printables.com/model/779428 | data_0032.tar |
519648 | Skadis: Prusa MK4 Hex Key + Screwdriver Storage | <p>A model I remixed from @Notrial 's Hex Holder. I wanted the screw driver to also be included as I use the hex keys and screwdriver quite a bit more than the other tools that came with the MK4, thats why I wanted them on my Skadis wall. There is one extra 3mm slot for a hex key. I have a 3mm hex key in there where I ... | [
"prusa",
"mk3s",
"screwdriver",
"skadis",
"hexbit",
"mk4",
"hexbitholder",
"allankey"
] | Hobby & Makers > Tools | [
"519648/images/image_1_compressed.jpg",
"519648/images/image_2_compressed.jpg"
] | [
"519648/stls/Prusa MK4 Hex + Screwdriver Storage Skadis.stl"
] | CC-BY | https://www.printables.com/model/519648 | data_0032.tar |
660931 | Skadis/ SKÅDIS Gewürzhalter Spice rack rund ⌀ 40mm | [
"skadis",
"spices",
"gewuerze"
] | Household > Kitchen | [
"660931/images/image_1_compressed.jpg",
"660931/images/image_2_compressed.jpg",
"660931/images/image_3_compressed.jpg"
] | [
"660931/stls/Skadis_Gewürz_Rund_40mm.stl"
] | CC-BY | https://www.printables.com/model/660931 | data_0032.tar | |
828531 | Skadis/SKÅDIS Perfect Hook | <p>Skadis hook with PERFECT tolerance for original IKEA Skadus. Model created based on original hooks on IKEA store. Print it with 100% Infill. </p><p> </p><p>If you like this model, buy me a coffee! <a href="https://buymeacoffee.com/juangonzalez">https://buymeacoffee.com/juangonzalez</a></p> | [
"hook",
"skadis"
] | 3D Printers > Accessories | [
"828531/images/image_1_compressed.jpg",
"828531/images/image_2_compressed.jpg"
] | [
"828531/stls/Hook.stl"
] | CC-BY | https://www.printables.com/model/828531 | data_0032.tar |
934031 | Skadis/Skådis Xbox Controller Holder | No Supports | <p>Tidying up or displaying your game controllers has never been easier. This holder allows you to elegantly store your Xbox controller when not in use while also easily showcasing it, perfect if you have a custom-designed controller.</p><p>I designed it to print sideways, making the pegs stronger and avoiding the need... | [
"skadis",
"xbox",
"xbox360",
"xboxcontroller",
"xboxone",
"xboxcontrollerstand",
"xboxonecontroller",
"skadisikea",
"xboxseriesx",
"skadisholder"
] | Hobby & Makers > Organizers | [
"934031/images/image_1_compressed.jpg",
"934031/images/image_2_compressed.jpg",
"934031/images/image_3_compressed.jpg",
"934031/images/image_4_compressed.jpg",
"934031/images/image_5_compressed.jpg"
] | [
"934031/stls/Skådis_controller_holder.stl"
] | CC-BY | https://www.printables.com/model/934031 | data_0032.tar |
324486 | SKALLAX-DIS: Another IKEA SKADIS pegboard mount for KALLAX shelf | <p>These mounts are used to hang the <strong>IKEA skadis pegboard</strong> on the side of <strong>IKEA kallax</strong> shelves in <strong>portrait orientation</strong>. The only hardware (optionally) needed are <strong>four</strong> <strong>M4 nuts. NO drilling required</strong></p><p>There are four mounts in total, 2 ... | [
"ikea",
"skadis",
"kallax",
"skadismount"
] | Art & Design > Wall-mounted | [
"324486/images/image_1_compressed.jpg",
"324486/images/image_2_compressed.jpg",
"324486/images/image_3_compressed.jpg",
"324486/images/image_4_compressed.jpg",
"324486/images/image_5_compressed.jpg",
"324486/images/image_6_compressed.jpg",
"324486/images/image_7_compressed.jpg"
] | [
"324486/stls/left_sidemount_female.stl",
"324486/stls/left_sidemount_male.stl",
"324486/stls/left_top_mount_skallaxdis.stl",
"324486/stls/right_sidemount_female.stl",
"324486/stls/right_sidemount_male.stl",
"324486/stls/right_top_mount_skallaxdis.stl"
] | GPL2.0 | https://www.printables.com/model/324486 | data_0032.tar |
951499 | Skateboard Holder | Skateboard mount | <p>This is a basic screw mounted skateboard holder design. I wanted mounts that were focused on being easy to take boards out and in of - a few models I tried here had far too tight fits and frustrating angles. Screw mounted because I've yet to find mounting tape that can handle a boards weight.</p><p>Mount with: ... | [
"functional",
"skateboard",
"hooks",
"skateboardholder"
] | Household > Home Decor | [
"951499/images/image_1_compressed.jpg",
"951499/images/image_2_compressed.jpg",
"951499/images/image_3_compressed.jpg"
] | [
"951499/stls/skateboard holder.stl"
] | CC-BY | https://www.printables.com/model/951499 | data_0032.tar |
5850 | Skateboard Toy | <p>Need a ride?</p>
<p>Why not Fingerboard...</p>
<p><p><h3>An Open Source Project - Fusion360 File Available!</h3></p>
</p><h3>Print instructions</h3><p><strong>Print, Peel, Snap and Play</strong></p>
<p>PS: Model toy in the G-code is 86% scale of .stl model files.</p> | [
"toy",
"skateboard"
] | Toys & Games > Other Toys & Games | [
"5850/images/image_1_compressed.jpg",
"5850/images/image_2_compressed.jpg",
"5850/images/image_3_compressed.jpg"
] | [
"5850/stls/skateboard.stl",
"5850/stls/wheel.stl"
] | CC-BY | https://www.printables.com/model/5850 | data_0032.tar |
470163 | Skateboard / Scooter Wall Hanger Hook | <p>Give it a “like” and a download, so I can get those sweet sweet Prusameters :)</p><p>---</p><p>This is a simple and effective wall hook for hanging skateboards or scooters on the wall, such as in a garage. I printed a few, and realized I could also use it for hanging our bicycle pump!</p><p>---</p><p>My print settin... | [
"hook",
"hanger",
"game",
"wallmount",
"bicycle",
"pump",
"skateboard",
"scooter",
"skateboarding",
"wallhook",
"wallhanger",
"razorscooter",
"bikepumpmount"
] | Household > Other House Equipment | [
"470163/images/image_1_compressed.jpg",
"470163/images/image_2_compressed.jpg",
"470163/images/image_3_compressed.jpg",
"470163/images/image_4_compressed.jpg",
"470163/images/image_5_compressed.jpg"
] | [
"470163/stls/ScooterHook.stl",
"470163/stls/ScooterHook_with_reinforcements.stl"
] | CC-BY | https://www.printables.com/model/470163 | data_0032.tar |
67386 | skeleton | tinkercad skeleton | Download free 3D printable STL models | [] | Toys & Games > Action Figures & Statues | [
"67386/images/image_1_compressed.jpg"
] | [
"67386/stls/Brilliant Snicket (3).stl"
] | CC0 | https://www.printables.com/model/67386 | data_0032.tar |
183946 | skeleton (flat) | <p>A flat human skeleton made from a silhouette-image by Freepik</p><p> </p><p>The joints are very small that enables it to be posed to a small degree. They might break easily.</p><p>Category: Creatures</p> | [
"halloween",
"skeleton",
"thingiverse"
] | Toys & Games > Action Figures & Statues | [
"183946/images/image_1_compressed.jpg",
"183946/images/image_2_compressed.jpg"
] | [
"183946/stls/Skelett_4.stl"
] | CC-BY | https://www.printables.com/model/183946 | data_0032.tar |
1082851 | Skeleton Bridge Pillar for wooden train tracks (Brio/Ikea) | <p>I always felt like most models used unnecessary amounts of filament, so I decided to try and create my own models with less material. It's still reasonably strong and prints quite fast and without supports.<br><br>Recommended Settings:</p><figure class="table"><table><tbody><tr><td>Material</td><td>Bambulab PLA Matt... | [
"ikea",
"bridge",
"track",
"raiser",
"train",
"brio",
"tracks",
"pillar",
"woodentrack",
"pylon",
"zug",
"schiene",
"gleis"
] | Toys & Games > Building Toys | [
"1082851/images/image_1_compressed.jpg",
"1082851/images/image_2_compressed.jpg",
"1082851/images/image_3_compressed.jpg",
"1082851/images/image_4_compressed.jpg",
"1082851/images/image_5_compressed.jpg",
"1082851/images/image_6_compressed.jpg",
"1082851/images/image_7_compressed.jpg"
] | [
"1082851/stls/skeleton-pillar-standard-height.stl"
] | CC-BY | https://www.printables.com/model/1082851 | data_0032.tar |
153138 | Skeleton Keys | 4 types of decorative skeleton keys | Download free 3D printable STL models | [
"prop",
"key",
"keys",
"skeletonkey",
"oldkey"
] | Costumes & Accessories > Props | [
"153138/images/image_1_compressed.jpg"
] | [
"153138/stls/Key1.stl",
"153138/stls/key2.stl",
"153138/stls/key3.stl",
"153138/stls/key4.stl"
] | CC0 | https://www.printables.com/model/153138 | data_0032.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.