model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
76101 | Soap Box | <p>Initially meant for a holiday trip we have these boxes now in daily use since 1.5 years.</p><p>Printed in plain PLA.</p><p>Can also be used for simple safe keeping of small treasures.. ;) </p> | [
"box",
"holder",
"soap"
] | Household > Bathroom | [
"76101/images/image_1_compressed.jpg",
"76101/images/image_2_compressed.jpg",
"76101/images/image_3_compressed.jpg"
] | [
"76101/stls/SoapBoxSmall_v9.stl"
] | CC0 | https://www.printables.com/model/76101 | data_0032.tar |
89757 | soap box, soap dish | <p>This is a cute soap dish.</p><p>Already fix some issues：2026/2/3</p><ul><li><p>Add a recessed groove to tell the top from the bottom, making it easier to orient the tray with the better-printing surface facing upward.</p></li><li><p>Slightly enlarge the soap tray to reduce the gap between the tray and the box.</p></... | [
"thingiverse"
] | Household > Bathroom | [
"89757/images/image_1_compressed.jpg",
"89757/images/image_2_compressed.jpg",
"89757/images/image_3_compressed.jpg",
"89757/images/image_4_compressed.jpg"
] | [
"89757/stls/soap box.stl",
"89757/stls/soap support plate.stl"
] | CC-BY | https://www.printables.com/model/89757 | data_0032.tar |
136732 | Soap Dish | Soap dish with centered drain | Download free 3D printable STL models | [
"soap",
"thingiverse",
"soapholder",
"soapdish",
"soaptray"
] | Household > Bathroom | [
"136732/images/image_1_compressed.jpg",
"136732/images/image_2_compressed.jpg"
] | [
"136732/stls/Soap_Dish.stl"
] | CC-BY | https://www.printables.com/model/136732 | data_0032.tar |
968118 | Soap dish (always dry soap) | <p>Watery counters are a problem of your past!<br>This super handy soap dish is a stylish addition to any sink or shower. It will also leave your counters, and your bar soap, bone-dry and ready to use. Leave it on the lip of your sink to allow the sloped base to trickle water back into the sink basin. The curved surfac... | [
"bathroom",
"soap",
"bathroomorganizer",
"soapholder",
"soapdish",
"bathroomaccessories",
"soapdishholder"
] | Household > Bathroom | [
"968118/images/image_1_compressed.jpg",
"968118/images/image_2_compressed.jpg",
"968118/images/image_3_compressed.jpg",
"968118/images/image_4_compressed.jpg",
"968118/images/image_5_compressed.jpg",
"968118/images/image_6_compressed.jpg",
"968118/images/image_7_compressed.jpg"
] | [
"968118/stls/soap-dish-v6_g.stl"
] | CC-BY | https://www.printables.com/model/968118 | data_0032.tar |
30948 | Soap dish - With and without drain holes. | <p>Some people have asked me for a drain version. I have added two versions. With and without drain holes. </p><figure class="image image_resized" style="width:50%;"><img src="https://media.printables.com/media/prints/30948/rich_content/a500b3ba-6bed-4f00-b6be-31cfd8862e3d/soap-dish-drain-01.png#%7B%22uuid%22%3A%2... | [
"bathroom",
"soap",
"bathroomorganizer",
"soapholder",
"soapdispenser",
"soapdish",
"bathroomaccessories",
"soaptray",
"soapbox",
"soapdishholder"
] | Household > Bathroom | [
"30948/images/image_1_compressed.jpg",
"30948/images/image_2_compressed.jpg",
"30948/images/image_3_compressed.jpg",
"30948/images/image_4_compressed.jpg",
"30948/images/image_5_compressed.jpg"
] | [
"30948/stls/Soap Dish Drain.stl",
"30948/stls/Soap Dish.stl"
] | CC-BY | https://www.printables.com/model/30948 | data_0032.tar |
1353764 | Soap Dish with a drain channel (keep your soap DRY) | <p>I designed and 3D printed this minimalist soap dish to solve a common problem — soggy soap!<br>It features a built-in <strong>drain channel</strong> that allows water to run off easily, keeping your soap dry and lasting longer. The open design promotes airflow and prevents mushy residue buildup.</p><p>Printed using ... | [
"design",
"3dprinting",
"bathroomorganizer",
"soapholder",
"soapdish",
"bathroomaccessories",
"style",
"soapdishholder",
"soapdishtray",
"bathroomdecor"
] | Household > Bathroom | [
"1353764/images/image_1_compressed.jpg",
"1353764/images/image_10_compressed.jpg",
"1353764/images/image_11_compressed.jpg",
"1353764/images/image_12_compressed.jpg",
"1353764/images/image_13_compressed.jpg",
"1353764/images/image_14_compressed.jpg",
"1353764/images/image_15_compressed.jpg",
"1353764/... | [
"1353764/stls/SoapHolderBottom.stl",
"1353764/stls/SoapHolderTop.stl"
] | CC0 | https://www.printables.com/model/1353764 | data_0032.tar |
217263 | Soap Dish with added drain spout | <p>Added a spout to prevent all the soap water from just leaching under the soap dish and maybe to help it actually drip into the sink. The model's geometry was also reduced a bit to make it easier to work with inside of Fusion360 but it's not easy to see that after it's printed.</p><p>Category: Household</p> | [
"holder",
"tray",
"soap",
"dish",
"dry",
"drain",
"clean",
"cleaner",
"drip",
"thingiverse",
"soaptray",
"spout",
"soapdishsoap",
"dishsoap",
"soapsoap",
"spoute"
] | Household > Other House Equipment | [
"217263/images/image_1_compressed.jpg",
"217263/images/image_2_compressed.jpg",
"217263/images/image_3_compressed.jpg",
"217263/images/image_4_compressed.jpg"
] | [
"217263/stls/Soap_DishWithSpout.stl"
] | CC-BY | https://www.printables.com/model/217263 | data_0032.tar |
354005 | Soap dish with drain / Seifenschale mit ablauf | <p>Printed on Aycubic i3 Mega s</p>
<p>With Support (touching buildpate)</p>
<p>Without a drain comming soon</p>
Category: Bathroom | [
"bath",
"bathroom",
"soap",
"thingiverse",
"soapholder",
"soapdish",
"bathroomaccessories",
"soaptray",
"soapdishholder",
"waschbecken"
] | Household > Bathroom | [
"354005/images/image_1_compressed.jpg",
"354005/images/image_10_compressed.jpg",
"354005/images/image_11_compressed.jpg",
"354005/images/image_12_compressed.jpg",
"354005/images/image_2_compressed.jpg",
"354005/images/image_3_compressed.jpg",
"354005/images/image_4_compressed.jpg",
"354005/images/imag... | [
"354005/stls/GitterSeifenschale.stl",
"354005/stls/RInne_2.stl",
"354005/stls/Seifenschale+Biene.stl",
"354005/stls/Seifenschale.stl",
"354005/stls/SoapDish-NoDrain-NoBee.stl",
"354005/stls/Soapdish_NoDrain.stl"
] | CC-BY | https://www.printables.com/model/354005 | data_0032.tar |
630593 | Soap Dish/Holder | <p>With this two-part soap dish, the soap can dry outside of the water. With the simple but still modern design, your bathroom will be decorated in a useful way. </p> | [
"kitchen",
"bathroom",
"soap",
"soapholder",
"soapdish",
"bathroomaccessories",
"soapbox",
"soapdishholder"
] | Household > Bathroom | [
"630593/images/image_1_compressed.jpg",
"630593/images/image_2_compressed.jpg",
"630593/images/image_3_compressed.jpg"
] | [
"630593/stls/dish.stl",
"630593/stls/grid.stl"
] | CC-BY | https://www.printables.com/model/630593 | data_0032.tar |
374027 | Soap Dish/Holder "WHIRL" | <p>German below.</p><p>This soap dish looks especially good when printed with transparent filament and without infill.</p><p>I printed the soap dish in PETG with 0.2 mm layer height, 4 contours and without infill. The print orientation in the <strong>.3mf sample file</strong> seems a bit illogical and unstable, but I w... | [
"bathroom",
"whirlpool",
"soapholder",
"soapdish",
"bathroomaccessories",
"soaptray",
"washbasin",
"seifenschale",
"blenderfile"
] | Household > Bathroom | [
"374027/images/image_1_compressed.jpg",
"374027/images/image_2_compressed.jpg",
"374027/images/image_3_compressed.jpg",
"374027/images/image_4_compressed.jpg",
"374027/images/image_5_compressed.jpg"
] | [
"374027/stls/BottomDish-WAVES.stl",
"374027/stls/SoapDish-WHIRL.stl",
"374027/stls/SoapDish-WHIRL@MINI.stl"
] | CC0 | https://www.printables.com/model/374027 | data_0032.tar |
32064 | Soap holder | <p>Porta saponetta in PETG - Soap holder PETG</p>
| [
"holder",
"soap",
"soapholder"
] | Household > Bathroom | [
"32064/images/image_1_compressed.jpg",
"32064/images/image_2_compressed.jpg",
"32064/images/image_3_compressed.jpg",
"32064/images/image_4_compressed.jpg",
"32064/images/image_5_compressed.jpg",
"32064/images/image_6_compressed.jpg",
"32064/images/image_7_compressed.jpg"
] | [
"32064/stls/esterno-piccolo-v1.stl",
"32064/stls/interno-piccolo-v2.stl"
] | CC0 | https://www.printables.com/model/32064 | data_0032.tar |
26014 | Soap holder (dry & hygenic) - wash your hands and kill coronavirus !!! | <p>This soap tray helps to keep soap dry and not dissolved by water. Bottom of the holder is at an angle and thus water flows out of it. It helps to keep traditional soap for longer use.<br/>
Soap is your best defence for coronavirus. Use it often.</p>
<h3>Print instructions</h3><p>Print in PETG<br/>
Layer height: 0.1 ... | [
"soapholder",
"soaptray"
] | Household > Bathroom | [
"26014/images/image_1_compressed.jpg",
"26014/images/image_2_compressed.jpg"
] | [
"26014/stls/soaphldr.stl"
] | CC0 | https://www.printables.com/model/26014 | data_0032.tar |
175794 | Soap holder wall mount |
<p>Amazing soap holder wall mount, perfect for the use of this soap holder
<a href="https://www.thingiverse.com/thing:404028">https://www.thingiverse.com/thing:404028</a></p>
<p>Will be taped to the wall with some 3M double-sided adhesive tape.</p>
Category: Bathroom
| [
"soap",
"thingiverse",
"soapholder",
"soaptray"
] | Household > Bathroom | [
"175794/images/image_1_compressed.jpg"
] | [
"175794/stls/Seifenschale_Halterung.stl"
] | CC-BY | https://www.printables.com/model/175794 | data_0032.tar |
19877 | Soap holder with locked filler | <p>I liked the original design but found three issues. First the holder is too shallow for bigger soaps. Second the filler just sits freely and is easily flipped when I pick up the soap. Third the flat bottom is too slippery on flat wet surfaces. I revised the design to address all issues by</p>
<ol>
<li>cutting lower ... | [
"soap",
"thingiverse",
"soapholder",
"soapdish",
"soaptray",
"soapbox"
] | Household > Bathroom | [
"19877/images/image_1_compressed.jpg",
"19877/images/image_2_compressed.jpg",
"19877/images/image_3_compressed.jpg",
"19877/images/image_4_compressed.jpg"
] | [
"19877/stls/filter.stl",
"19877/stls/soap_box.stl"
] | CC-BY | https://www.printables.com/model/19877 | data_0032.tar |
26656 | SOAP HOLDER WITH OUTLET | <p>You don´t have to pour water out of this soap holder.</p>
| [] | Household > Bathroom | [
"26656/images/image_1_compressed.jpg"
] | [
"26656/stls/stojanek-na-mydlo-s-odtokem.stl"
] | CC0 | https://www.printables.com/model/26656 | data_0032.tar |
720613 | Soap holder, Soap Dish | <p>height: 2 cm </p><p>width: 9 cm</p><p>length: 13 cm</p> | [
"hexagon",
"bathroom",
"soapholder",
"bathroomaccessories"
] | Household > Bathroom | [
"720613/images/image_1_compressed.jpg",
"720613/images/image_2_compressed.jpg",
"720613/images/image_3_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/720613 | data_0032.tar |
700055 | soap tray | a soap tray | Download free 3D printable STL models | [
"soap",
"soapholder",
"soaptray"
] | Household > Bathroom | [
"700055/images/image_1_compressed.jpg",
"700055/images/image_2_compressed.jpg",
"700055/images/image_3_compressed.jpg",
"700055/images/image_4_compressed.jpg"
] | [
"700055/stls/soap_tray.stl"
] | CC-BY | https://www.printables.com/model/700055 | data_0032.tar |
29920 | Soapdish Pro | <p>A tool that may save life. Say howdy to a soapdish that is extreme in every way. Great performance, configurable, it was created to let a wide range of makers to push the limits of what is possible while keeping their hands clean.</p>
<p>The Soapdish Pro consists of three parts:</p>
<ul>
<li><p>A high tech drainer t... | [
"soap",
"macpro",
"mold",
"concrete",
"freecad",
"soapdish",
"createdwithfreecad",
"plaster"
] | Household > Bathroom | [
"29920/images/image_1_compressed.jpg",
"29920/images/image_10_compressed.jpg",
"29920/images/image_11_compressed.jpg",
"29920/images/image_12_compressed.jpg",
"29920/images/image_13_compressed.jpg",
"29920/images/image_2_compressed.jpg",
"29920/images/image_3_compressed.jpg",
"29920/images/image_4_com... | [
"29920/stls/prusaslicermodifiershape.stl",
"29920/stls/soapdishprobowl.stl",
"29920/stls/soapdishprogrip.stl",
"29920/stls/soapdishpromoldpart1.stl",
"29920/stls/soapdishpromoldpart2.stl",
"29920/stls/soapdishpromoldpart3.stl",
"29920/stls/soapdishproplatevirgin.stl",
"29920/stls/soapdishproplate_at_0... | CC-BY | https://www.printables.com/model/29920 | data_0032.tar |
354004 | Soapdish with drain(boat version) /Seifenschale mit ablauf |
<p>Boat Version of this soap dish</p>
<p>Prinded on annycubic i3 mega s</p>
Category: Bathroom
| [
"bath",
"bathroom",
"soap",
"thingiverse",
"bathroomorganizer",
"soapholder",
"soapdish",
"vbar",
"sower"
] | Household > Bathroom | [
"354004/images/image_1_compressed.jpg",
"354004/images/image_2_compressed.jpg",
"354004/images/image_3_compressed.jpg",
"354004/images/image_4_compressed.jpg",
"354004/images/image_5_compressed.jpg",
"354004/images/image_6_compressed.jpg",
"354004/images/image_7_compressed.jpg",
"354004/images/image_8... | [
"354004/stls/Drain.stl",
"354004/stls/Grid_soapdish.stl",
"354004/stls/Soapdish_Boat.stl",
"354004/stls/Soapdish_no_drain_boot.stl"
] | CC-BY | https://www.printables.com/model/354004 | data_0032.tar |
209945 | Soap/Sponge Tray | <p>Keep your counter clean with this tray, designed to move excess water towards the spout into your sink.</p> | [
"kitchen",
"water",
"counter",
"bathroom",
"tray",
"sink",
"soap",
"sponge",
"countertop"
] | Household > Kitchen | [
"209945/images/image_1_compressed.jpg",
"209945/images/image_2_compressed.jpg"
] | [
"209945/stls/Soap and Sponge Tray.stl"
] | CC-BY | https://www.printables.com/model/209945 | data_0032.tar |
536611 | Soccer Ball | [
"toy",
"toys",
"soccer",
"soccerball"
] | Toys & Games > Other Toys & Games | [
"536611/images/image_1_compressed.jpg"
] | [
"536611/stls/Soccer ball.stl"
] | CC0 | https://www.printables.com/model/536611 | data_0032.tar | |
154606 | Soccer Ball (football) for LUCKY 13 | <p>A soccer* ball to do soccer* poses <br>for all you soccer* fans</p><p>*AKA football</p> | [
"football",
"soccer",
"kick"
] | Art & Design > Sculptures | [
"154606/images/image_1_compressed.jpg",
"154606/images/image_2_compressed.jpg"
] | [
"154606/stls/soccerball13.stl"
] | CC0 | https://www.printables.com/model/154606 | data_0032.tar |
394331 | Soccer Ball Stand | <p>I designed this stand to display my full size soccer ball on a shelf.</p><p>Z-axis can be adjusted to be any height. Model is the taller stand in the image.</p><p> </p><h3>Print Settings</h3><p><strong>Printer Brand: </strong>Creality</p><p><strong>Printer: </strong>Ender 3</p><p><strong>Rafts: </strong>No</p><... | [
"display",
"stand",
"ball",
"futbol",
"football",
"soccer"
] | Sports & Outdoor > Other Sports | [
"394331/images/image_1_compressed.jpg",
"394331/images/image_2_compressed.jpg"
] | [
"394331/stls/Soccer Ball Stand v2.stl"
] | CC-BY | https://www.printables.com/model/394331 | data_0032.tar |
261497 | Soccer ball whistle | <p>Whistle with the characteristic pattern of soccer balls.</p><p>The whistle is printed with the inner ball that produces the characteristic vibration sound.</p><p>You will have to detach the ball by pushing from the holes of the whistle.</p> | [
"toy",
"whistle",
"ball",
"football",
"soccer"
] | Toys & Games > Other Toys & Games | [
"261497/images/image_1_compressed.jpg",
"261497/images/image_2_compressed.jpg",
"261497/images/image_3_compressed.jpg",
"261497/images/image_4_compressed.jpg",
"261497/images/image_5_compressed.jpg"
] | [
"261497/stls/Soccer_ball_whistle.stl"
] | CC-BY | https://www.printables.com/model/261497 | data_0032.tar |
507677 | Soccer Football Ball Capsule | ball soccer shaped capsule for multicolor printing
recommended parameters:
-wall 3 - 4
-supports 60°
-infill 20% | Download free 3D printable STL models | [] | Sports & Outdoor > Outdoor Sports | [
"507677/images/image_1_compressed.jpg"
] | [
"507677/stls/bottom.stl",
"507677/stls/patch.stl",
"507677/stls/Upper part.stl"
] | CC-BY | https://www.printables.com/model/507677 | data_0032.tar |
480468 | Soccer Trophy multicolor MMU | <p>I had wanted to make trophies for my daughters soccer team. The model itself has no text on it. I did all my text additions in Prusa Slicer.</p><p>You can print this with two colors if you add a filament swap, or you can use an MMU/AMS for multi-color. 3mf files for each provided.</p> | [
"trophy",
"mmu",
"multicolor",
"kids",
"award",
"sports",
"soccer",
"kidstoys",
"mmu3",
"awards",
"sportstrophy",
"awardtrophy"
] | Art & Design > Sculptures | [
"480468/images/image_1_compressed.jpg",
"480468/images/image_2_compressed.jpg"
] | [
"480468/stls/Soccer Trophy-MMU.stl",
"480468/stls/Soccer Trophy.stl"
] | CC-BY | https://www.printables.com/model/480468 | data_0032.tar |
53982 | Sock friendly mk3s+ fan shroud | <p>A silicone sock adds about 1.5mm of material around the heater block. This seems to be enough to block or divert a lot of the direct air flow from the stock mk3s+ fan shroud.<br/>
In an effort to compensate for this I've modified the mk3s+ fan shroud to sit 1.4 mm further down.</p>
<p>So far I've only done some init... | [
"mk3s",
"fanduct"
] | 3D Printers > Prusa Parts & Upgrades | [
"53982/images/image_1_compressed.jpg",
"53982/images/image_2_compressed.jpg",
"53982/images/image_3_compressed.jpg"
] | [
"53982/stls/sock-friendly-fan-shroud.stl"
] | GPL2.0 | https://www.printables.com/model/53982 | data_0032.tar |
121692 | Socket button | <p>The stl model has 40x40mm but I printed it at 0,15mm layerheight and 75% scale so the result is 30x30mm (see 3mf file) which I think is a more suitable size. But you can scale it as you wish.</p><p> </p><p>Also check out:</p><p><a href="https://www.youtube.com/channel/UChKp-968z1i5PN29gbR7YfA">https://www.youtu... | [
"fashion",
"socket",
"buttons",
"button",
"clothes",
"outlet",
"accesories"
] | Fashion > Other Fashion Accessories | [
"121692/images/image_1_compressed.jpg",
"121692/images/image_2_compressed.jpg",
"121692/images/image_3_compressed.jpg",
"121692/images/image_4_compressed.jpg",
"121692/images/image_5_compressed.jpg",
"121692/images/image_6_compressed.jpg",
"121692/images/image_7_compressed.jpg",
"121692/images/image_8... | [
"121692/stls/socket_button.stl"
] | CC-BY | https://www.printables.com/model/121692 | data_0032.tar |
1203392 | Socket head cable clip | <p>I made this hex head pressure fit cable clip to install easitly into the hex side of screws and control wiring and organization. </p><p> </p><p>The hex fits a 3/16" inch hex head recess that is about 4.75mm across. The clip flexure inner diameter is slightly less than 10mm.</p> | [
"cable",
"head",
"clip",
"socket",
"hex",
"wire"
] | Hobby & Makers > Tools | [
"1203392/images/image_1_compressed.jpg"
] | [
"1203392/stls/CABLE_CLIP.stl"
] | CC-BY | https://www.printables.com/model/1203392 | data_0032.tar |
98766 | Socket Organizer | <p>Socket sizes:<br>*Imperial Short 500 12pt - 1/2 inch drive - 3/8" to 1" in 16th increments<br>*Imperial Short 375 12pt - 3/8 inch drive - 1/4" to 13/16" in 16th increments<br>*Imperial Short 375 8pt - 3/8 inch drive - 1/4" to 1/2" in 16th increments<br>*Imperial Short 375 6pt - 3/8 inch drive - 1/4" to 1" in 16th in... | [
"organizer",
"holder",
"socket",
"toolbox",
"workshop",
"tools",
"toolholder",
"automotive",
"toolstorage",
"handtools",
"handtool"
] | Hobby & Makers > Tools | [
"98766/images/image_1_compressed.jpg",
"98766/images/image_2_compressed.jpg",
"98766/images/image_3_compressed.jpg"
] | [
"98766/stls/Hex 250 - Deep.stl",
"98766/stls/Hex 250.stl",
"98766/stls/Hex 375 - Deep.stl",
"98766/stls/Hex 375.stl",
"98766/stls/Imperial Long 250 6pt and 12pt.stl",
"98766/stls/Imperial Long 375 12pt.stl",
"98766/stls/Imperial Long 500 12pt.stl",
"98766/stls/Imperial Short 250 12pt.stl",
"98766/st... | CC-BY | https://www.printables.com/model/98766 | data_0032.tar |
453900 | Socket Protector (SCHUKO) | <p>Socket protector for 220V Schuko Plugs</p>
<p>Childsafe (you need a key to remove it)</p>
<p>Print with support.</p>
Category: Household Supplies | [
"children",
"thingiverse",
"strom",
"childsafety",
"childproof",
"220v",
"schuko",
"kindersicherung"
] | Household > Other House Equipment | [
"453900/images/image_1_compressed.jpg",
"453900/images/image_2_compressed.jpg",
"453900/images/image_3_compressed.jpg",
"453900/images/image_4_compressed.jpg"
] | [
"453900/stls/socket_protector.stl",
"453900/stls/socket_protector_key.stl"
] | CC-BY | https://www.printables.com/model/453900 | data_0032.tar |
86485 | Socket spacer (vložka do zásuvky) | <p>Spacer fixes type C plug in type E (European/French) socket and prevents the plug from wobbling. Very useful with long or heavy adaptors which can easily break in the socket. Holds the adaptor firmly in place.</p><p>Printed in Prusa's orange PLA on Prusa Mini+ with 0.2 layer.</p><p>STL file contains an updated versi... | [
"plug",
"adaptor"
] | Gadgets > Other Gadgets | [
"86485/images/image_1_compressed.jpg",
"86485/images/image_2_compressed.jpg",
"86485/images/image_3_compressed.jpg"
] | [
"86485/stls/Spacer.stl"
] | CC-BY | https://www.printables.com/model/86485 | data_0032.tar |
37331 | Socks hanger | <p>When I talked to my mom about this upcycling contest, she asked for this design, so I did it, and it works wonders.<br/>
You will need some keychain rings.</p>
<h3>Print instructions</h3><p>Print it in the provided orientation.<br/>
Not special settings are required.<br/>
PETG is recomended</p> | [
"prusament",
"hanger",
"upcylcing",
"socks"
] | Household > Other House Equipment | [
"37331/images/image_1_compressed.jpg",
"37331/images/image_2_compressed.jpg"
] | [
"37331/stls/socks-hanger.stl"
] | CC0 | https://www.printables.com/model/37331 | data_0032.tar |
251822 | Soda Bottle Funnel Cap for Elegoo Resin (0.5 & 1 kg) | <p>A cap with threaded centre to suit an Australian soda bottle (1.25 L or 2 L). Cap screws onto an Elegoo 0.5 or 1 kg resin bottle. Purpose is to enable easy return of resin from vat to bottle through a suitable paint filter. </p><p>Also included is a plain cap for times when the original bottle cap is no longer ... | [
"cap",
"funnel",
"resin",
"elegoo"
] | 3D Printers > Accessories | [
"251822/images/image_1_compressed.jpg",
"251822/images/image_2_compressed.jpg",
"251822/images/image_3_compressed.jpg",
"251822/images/image_4_compressed.jpg",
"251822/images/image_5_compressed.jpg"
] | [
"251822/stls/basic_cap.stl",
"251822/stls/funnel_cap.stl"
] | CC0 | https://www.printables.com/model/251822 | data_0032.tar |
76540 | Soda bottle opener |
<h3> Bottle Opener</h3>
<p>Simple bottle opener for assisted living.<br/>
Fits 3/4 inch / 20mm bottle caps</p>
<h3> Print Settings</h3>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p><p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div><strong>Resolution:</strong></p>
<p>any</p>
<p><p class... | [
"bottleopener",
"thingiverse",
"assistedeating",
"assistedliving",
"sodabottleopener"
] | Household > Kitchen | [
"76540/images/image_1_compressed.jpg",
"76540/images/image_2_compressed.jpg"
] | [
"76540/stls/soda_bottle_opener.stl"
] | CC-BY | https://www.printables.com/model/76540 | data_0032.tar |
185641 | Soda Can lid | <p>If your wife/husband is like mine and NEVER drinks the whole can, it can help reduce the waste keeping gasified for longer. </p><p>For 33cl cans</p><p> </p><p>Printed in PLA and PETG, don't think it would work in TPU.</p><p> </p><p> </p><p>If you want to fit in smaller cans (like the one in the p... | [
"can",
"lid",
"cap",
"cover",
"soda",
"cocacola",
"coca"
] | Household > Kitchen | [
"185641/images/image_1_compressed.jpg",
"185641/images/image_2_compressed.jpg",
"185641/images/image_3_compressed.jpg"
] | [
"185641/stls/Soda_lid_0.6mmthick.stl",
"185641/stls/Soda_lid_0.8mmthick.stl"
] | CC-BY | https://www.printables.com/model/185641 | data_0032.tar |
241003 | Soda Can Opener |
<p>With way too much time on my hands, I decided to render my version of this handy gadget for opening soda cans from scratch in OpenSCAD. I picked a lot of dimensions off the original and this version seems to work well.</p>
<p>More pictures and babbling about this can be found at <a href="https://tomhorsley.com/ha... | [
"thingiverse"
] | Household > Kitchen | [
"241003/images/image_1_compressed.jpg",
"241003/images/image_2_compressed.jpg"
] | [
"241003/stls/newlid.stl"
] | CC-BY | https://www.printables.com/model/241003 | data_0032.tar |
867611 | Soda can opener - with option to use as lid | <p>Soda can opener with option to use as lid for bee and other Insects, will also reduce spillage if tip over.</p><p>How to use it:</p><p>Open soda can </p><ol><li>Insert the soda can tap into hole in front</li><li>Pull up to open the soda can</li><li>Push it down to lock it on the edge</li></ol><p>Use as li... | [
"can",
"soda",
"sodacan",
"canlid",
"canopener",
"cancover",
"sodacanlid",
"sodacancover",
"sodacanopener"
] | Household > Kitchen | [
"867611/images/image_1_compressed.jpg",
"867611/images/image_2_compressed.jpg",
"867611/images/image_3_compressed.jpg",
"867611/images/image_4_compressed.jpg",
"867611/images/image_5_compressed.jpg",
"867611/images/image_6_compressed.jpg"
] | [
"867611/stls/CanOpener.stl",
"867611/stls/CanOpener_0_4_Nozzle.stl",
"867611/stls/CanOpener_0_8_Nozzle.stl"
] | CC0 | https://www.printables.com/model/867611 | data_0032.tar |
904051 | Soda can opener with magnet hole - with option to use as lid | <p>Added a magnet hole, 6mm diameter, 2mm depth. The hole is not fully 2mm so magnet will be a bit above the surface, but still it is staying firm on the fridge, so it will be always close to your cans.</p><p>With a drop of super glue you can insert the magnet permanently.</p><p>Fun fact: did you know that 30%+ citric ... | [
"can",
"magnet",
"magnetic",
"soda",
"sodacan",
"canlid",
"canopener",
"cancover",
"sodacanlid",
"sodacancover",
"sodacanopener",
"magnetholes"
] | Household > Kitchen | [
"904051/images/image_1_compressed.jpg",
"904051/images/image_2_compressed.jpg"
] | [
"904051/stls/canopener-with-magnet-hole.stl"
] | CC0 | https://www.printables.com/model/904051 | data_0032.tar |
275731 | Soda drink can lid - rugged |
<p>I printed <a href="https://www.thingiverse.com/thing:36858">soda can lid by tmorris9</a> but it breaks a little easily during normal use, so I made the model a little more rugged. The actual fit on normal cans is great.</p>
<p>As of yet I have not printed, I've just added material to prevent breakage where there ... | [
"thingiverse",
"sodacan",
"rugged",
"sodacanlid"
] | Household > Kitchen | [
"275731/images/image_1_compressed.jpg",
"275731/images/image_2_compressed.jpg",
"275731/images/image_3_compressed.jpg"
] | [
"275731/stls/a3ab146c-11e5-40fc-bb9e-2c313e3cdda5_275731.stl"
] | CC-BY | https://www.printables.com/model/275731 | data_0032.tar |
24291 | Soda Stream Air Gun | <p>Your compressed air can is empty and you have dust to blow out?<br>Then it's time to take a break and drink the perfect sparkling water.<br>But unfortunately, your Soda Stream can is running out of air and the water isn't as sparkling?</p><p>Good news, you can recycle the remaining air from the Soda Stream Can by tu... | [
"sodastream",
"airgun",
"compressedair"
] | Hobby & Makers > Tools | [
"24291/images/image_1_compressed.jpg",
"24291/images/image_2_compressed.jpg",
"24291/images/image_3_compressed.jpg",
"24291/images/image_4_compressed.jpg",
"24291/images/image_5_compressed.jpg",
"24291/images/image_6_compressed.jpg",
"24291/images/image_7_compressed.jpg",
"24291/images/image_8_compres... | [
"24291/stls/button-seal.stl",
"24291/stls/button.stl",
"24291/stls/head.stl",
"24291/stls/lever.stl",
"24291/stls/main-seal.stl",
"24291/stls/pin.stl",
"24291/stls/ring.stl"
] | CC0 | https://www.printables.com/model/24291 | data_0032.tar |
487852 | Soda Stream Button (Spare part) | <p>The button of my soda stream was broken, so I designed my own one. </p><p>Print settings:<br>Material: PLA, PETG, ABS<br>Layer: 0,16 mm <br>Walls: 3-5 <br>Infill: 50%<br>Support needed: Yes<br><br>(After 2 Years, the Button I printed with PLA, still works!) </p> | [
"button",
"soda",
"sodastream",
"sparepart"
] | Household > Kitchen | [
"487852/images/image_1_compressed.jpg",
"487852/images/image_2_compressed.jpg",
"487852/images/image_3_compressed.jpg",
"487852/images/image_4_compressed.jpg",
"487852/images/image_5_compressed.jpg",
"487852/images/image_6_compressed.jpg"
] | [
"487852/stls/SodaStream Button.stl"
] | CC0 | https://www.printables.com/model/487852 | data_0032.tar |
367292 | SodaStream Bottle Base | <p>I dropped my <a href="https://sodastream.com/products/1-liter-black-source-carbonating-bottles-twin-pack">1L Soda Steam Slim Bottle</a> a couple times the and the bottom plastic base broke so I modeled a replacement. Just put a little hot glue in the bottom and boom…back in business.</p><p>This model is designed to ... | [
"parametric",
"base",
"soda",
"sodastream",
"repacement",
"onshape",
"sparkling",
"stream",
"bubbles",
"pepsi"
] | Household > Kitchen | [
"367292/images/image_1_compressed.jpg",
"367292/images/image_2_compressed.jpg",
"367292/images/image_3_compressed.jpg",
"367292/images/image_4_compressed.jpg",
"367292/images/image_5_compressed.jpg",
"367292/images/image_6_compressed.jpg",
"367292/images/image_7_compressed.jpg",
"367292/images/image_8... | [
"367292/stls/SodaStream 1L_Slim_Bottle - Base.stl"
] | CC-BY | https://www.printables.com/model/367292 | data_0032.tar |
182514 | SodaStream Bottle Rack (x5 and x3) |
<p>We drink a ton of sparkling water so make up a bunch of SodaStream bottles then leave them in the fridge to chill. We used a clumsy bottle rack to stack them horizontally on a shelf but they'd frequently fall off and it was quite annoying.</p>
<p>I finally got around to designing a rack that fits 5 of these bottl... | [
"sodastream",
"thingiverse"
] | Household > Kitchen | [
"182514/images/image_1_compressed.jpg",
"182514/images/image_2_compressed.jpg",
"182514/images/image_3_compressed.jpg",
"182514/images/image_4_compressed.jpg"
] | [
"182514/stls/sodastream-bottle-rack-3.stl",
"182514/stls/sodastream-bottle-rack-5.stl"
] | CC-BY | https://www.printables.com/model/182514 | data_0032.tar |
579541 | Sodastream bottle stand | <p>A simple stand for two SodaStream bottles and caps.<br>It can be placed next to the soda stream to dry washed bottles.<br>The bottom tray is rimmed to keep water from running off the table.</p><p>I made this with PETG filament, but PLA would also work.<br> </p> | [
"dry",
"bottole",
"sodastream"
] | Household > Kitchen | [
"579541/images/image_1_compressed.jpg",
"579541/images/image_2_compressed.jpg",
"579541/images/image_3_compressed.jpg"
] | [
"579541/stls/sodastream_stand.stl"
] | CC-BY | https://www.printables.com/model/579541 | data_0032.tar |
6198 | Sodastream CO2 bottle stand | <p>I designed this to keep the CO2 bottle for my budget aquarium C02 fertilizing from tipping over.<br/>
Fits an 425g C02/60 Liter/ 60mm diameter CO2 bottle</p>
<h3>Print instructions</h3><p>Used PLA, 0.3mm Layers</p> | [
"bottle",
"stand",
"aquarium",
"co2",
"sodastream",
"fertilizer"
] | Household > Pets | [
"6198/images/image_1_compressed.jpg"
] | [
"6198/stls/sodastream_co2_bottle_stand.stl"
] | GPL2.0 | https://www.printables.com/model/6198 | data_0032.tar |
277955 | Sodastream CO2 cylinder holder | <p>Hello together,</p><p>Who doesn't know the struggle with CO2 cylinders lying somewhere around in a cabinet taking up a lot of space?</p><p>Therefore i designed a small bracket to screw into the cabinet. Depends on the bracket you need, it can hold 2-4 cylinders.</p><p> </p><p>Happy printing :)</p> | [
"holder",
"bracket",
"cylinder",
"co2",
"sodastream",
"mountingbracket",
"sodastreambottle",
"sodastreamstand",
"sodastreamcylinder"
] | Household > Kitchen | [
"277955/images/image_1_compressed.jpg",
"277955/images/image_2_compressed.jpg"
] | [
"277955/stls/Sodastrream cylinder 2.stl",
"277955/stls/Sodastrream cylinder 3.stl",
"277955/stls/Sodastrream cylinder 4.stl"
] | CC-BY | https://www.printables.com/model/277955 | data_0032.tar |
409804 | SodaStream CO2-Tube-Nut | <p>A Nut to replace the original SodaStream Nut wich is pressing the Tube in the bottle head. The broken “old” nut can stay on the black tube.</p><p>printed in PLA with a layer hight of 0,2mm </p> | [
"sodastream",
"co2cylinder"
] | Household > Kitchen | [
"409804/images/image_1_compressed.jpg",
"409804/images/image_2_compressed.jpg",
"409804/images/image_3_compressed.jpg"
] | [
"409804/stls/CO2-Tube-Nut.stl"
] | CC-BY | https://www.printables.com/model/409804 | data_0032.tar |
118744 | SodaStream container holder | <p>print with PLA at 0.2 LH</p> | [
"sodastream"
] | Hobby & Makers > Organizers | [
"118744/images/image_1_compressed.jpg"
] | [
"118744/stls/soda stream bottle holder v5.stl"
] | CC0 | https://www.printables.com/model/118744 | data_0032.tar |
337400 | Sodastream Duo Drip Off Glass Bottle | <p>Most of the exisiting dripoffs for 3D printing did not fit for SodaStream Duo glass bottles, so I designed this one.</p><p><a href="https://www.printables.com/@OliWee_1551265">@OliWee_1551265</a> made a wallmount for this dripoff, take a look at <a href="https://www.printables.com/model/780890-sodastream-duo-drip-of... | [
"bottle",
"dry",
"glass",
"sodastream",
"duo",
"glassbottle",
"sodastreamglassbottle",
"dripoff",
"sodastreamduo"
] | Household > Kitchen | [
"337400/images/image_1_compressed.jpg"
] | [
"337400/stls/Sodastream_duo_dripoff.stl"
] | GPL2.0 | https://www.printables.com/model/337400 | data_0032.tar |
85079 | Sodastream Fizzi Button Replacement | <p>Print sideways as shown for tensile strength.<br>Add a 30mm M3 bolt and a square (hex works) nut.<br>Some support needed between the holes but not much for easy removal.</p> | [
"button",
"soda",
"sodastream",
"stream",
"fizzi"
] | Household > Kitchen | [
"85079/images/image_1_compressed.jpg"
] | [
"85079/stls/sodastream handle replacment.stl"
] | CC0 | https://www.printables.com/model/85079 | data_0032.tar |
116888 | SodaStream Flavoring Bottle Organizer | <p>The holes in the sides are so the label can be read without taking the bottles out.</p> | [
"water",
"organizer",
"holder",
"organization",
"sodastream",
"flavoring",
"flavor"
] | Household > Kitchen | [
"116888/images/image_1_compressed.jpg"
] | [
"116888/stls/SodaStream_Flavoring_Bottle_Holder.stl"
] | GPL2.0 | https://www.printables.com/model/116888 | data_0032.tar |
54460 | Sodastream Halter für Glasflaschen // Sodastream holder for glass bottles | <p>Sodastream Halter für Glasflaschen zum austrocknen.</p>
<p>stabil / Standfestigkeit hoch / schlichtes Design</p>
<p>Sodastream holder for glass bottles to dry out.</p>
<p>stable / Stability high / simple design</p>
<h3>Print instructions</h3><p>Printer brand:<br/>
Prusa</p>
<p>Printer:<br/>
I3 MK3S</p>
<p>Rafts:<br/... | [
"sodastream",
"flaschenhalter",
"sodastreamcrystal",
"bottelholder"
] | Household > Kitchen | [
"54460/images/image_1_compressed.jpg",
"54460/images/image_2_compressed.jpg",
"54460/images/image_3_compressed.jpg",
"54460/images/image_4_compressed.jpg"
] | [
"54460/stls/soda_v2.stl"
] | CC0 | https://www.printables.com/model/54460 | data_0032.tar |
300630 | Sodastream Jet Button |
<p>Modified for Sodastream JET (https://www.amazon.com/dp/B07Q3966XW/ref=dp_cerb_1)</p>
<p>Made the lever longer.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>i3 MK2.5</p></div>
<p><strong>Rafts:</strong></p>
<p>N... | [
"knob",
"sodastream",
"thingiverse",
"sodaknob"
] | Household > Kitchen | [
"300630/images/image_1_compressed.jpg",
"300630/images/image_2_compressed.jpg",
"300630/images/image_3_compressed.jpg"
] | [
"300630/stls/sodastream3-KnopfBlub.stl"
] | CC-BY | https://www.printables.com/model/300630 | data_0032.tar |
11360 | SodaStream Nut | <p>This is the nut that connects the little black CO2 hose, the hose has to be pushed through the slot in the nut. Printed with PLATech for strength. No supports needed</p>
<h3>Print instructions</h3><p>Category: Replacement Parts</p> | [
"sodastream",
"thingiverse"
] | Household > Kitchen | [
"11360/images/image_1_compressed.jpg"
] | [
"11360/stls/sodastream_nut.stl"
] | CC-BY | https://www.printables.com/model/11360 | data_0032.tar |
562083 | SodaStream replacement CO2 nut | <figure class="table"><table style="background-color:#fa6831;border:10px solid #E84040;"><tbody><tr><td><h3>WARNING CO₂ is under pressure!</h3><ul><li><strong>THIS MUST BE USED ONLY WITH SAFTEY VALVES IN PLACE</strong></li><li>This still may explode or break - be prepared</li><li>Be careful</li><li>Cover with towel whe... | [
"openscad",
"sodastream",
"scad",
"sodastreamcrystal",
"sodastreamrepair"
] | Household > Kitchen | [
"562083/images/image_1_compressed.jpg",
"562083/images/image_2_compressed.jpg"
] | [
"562083/stls/23-246-SodastreamCO2Mutter.stl",
"562083/stls/23-246-SodastreamCO2MutterHoseHoleOnly.stl",
"562083/stls/23-246-SodastreamCO2MutterM6pneumaticfitting.stl"
] | CC0 | https://www.printables.com/model/562083 | data_0032.tar |
116784 | Sodastream / Wassermax bottle stand | <p>Simple stand that allows the waterbottles to dry out. Fits bot sodasteam and wassermax bottles.</p><p>Print with standard settings in PLA or PETG</p> | [
"stand",
"sodastream",
"drying",
"wassermax"
] | Household > Kitchen | [
"116784/images/image_1_compressed.jpg",
"116784/images/image_2_compressed.jpg"
] | [
"116784/stls/Stand.stl"
] | CC-BY | https://www.printables.com/model/116784 | data_0032.tar |
208365 | SODA/BEER CAN BUG SHIELD | Short print
4 Grams to print | Download free 3D printable STL models | [
"beer",
"cap",
"bug",
"sodacan"
] | Household > Kitchen | [
"208365/images/image_1_compressed.jpg",
"208365/images/image_2_compressed.jpg",
"208365/images/image_3_compressed.jpg"
] | [
"208365/stls/Beer LID (1).stl",
"208365/stls/Beer lid no supports.stl"
] | CC0 | https://www.printables.com/model/208365 | data_0032.tar |
275461 | Sofa | It＇s a sofa. | Download free 3D printable STL models | [] | Costumes & Accessories > Props | [
"275461/images/image_1_compressed.jpg"
] | [
"275461/stls/It's a sofa.stl"
] | CC0 | https://www.printables.com/model/275461 | data_0032.tar |
1338947 | Soft Box - Printable Cloth Fabric Flexi Storage | <blockquote><p>Is it practical, useful, and expands on the body of human knowledge? </p><p> </p><p>Probably not, but it sure is satisfying.. <strong>Introducing the Soft Box! </strong></p></blockquote><p><strong>My Cloth 3d Printable fabric has a secret super-power, it can be built into 3D objects! ... | [
"box",
"fabric",
"storage",
"flexi",
"printinplace",
"cloth",
"soft"
] | Fashion > Other Fashion Accessories | [
"1338947/images/image_1_compressed.jpg",
"1338947/images/image_2_compressed.jpg",
"1338947/images/image_3_compressed.jpg",
"1338947/images/image_4_compressed.jpg"
] | [
"1338947/stls/Soft Box STL.stl"
] | CC0 | https://www.printables.com/model/1338947 | data_0032.tar |
44234 | Soft Bracelet | <p>Flexible bracelets that prints in Vase mode.<br/>
A quick print that looks very nice<br/>
Prusa PETG Yellow gold showing</p>
<p>Some designs to pic from</p>
<p>Scaling reference (roughly)<br/>
100% ----- 60mm Diameter<br/>
115% ----- 70mm Diameter<br/>
130% ----- 80mm Diameter</p>
<h3>Print instructions</h3><p>You... | [] | Fashion > Other Fashion Accessories | [
"44234/images/image_1_compressed.jpg",
"44234/images/image_2_compressed.jpg",
"44234/images/image_3_compressed.jpg",
"44234/images/image_4_compressed.jpg",
"44234/images/image_5_compressed.jpg"
] | [
"44234/stls/60mm-flexy-bracelet.stl",
"44234/stls/60mm-flexy-grain-bracelet.stl",
"44234/stls/60mm-flexy-tear-bracelet.stl",
"44234/stls/flexy-bracelet.stl",
"44234/stls/flexy-grain-bracelet.stl",
"44234/stls/flexy-tear-bracelet.stl"
] | CC-BY | https://www.printables.com/model/44234 | data_0032.tar |
88150 | Soft Door Stop | <p>I created this doorstop out of tpu to have a soft cushion for the door. I made it with black to match the room, but any color can be used.</p><p> </p><p>1.75mm TPU filament</p><p>4mm nozzle</p><p>20% infill</p><p>no supports or plate adhesion needed</p><p>Just under 1 hour to print @50mm/s</p> | [
"door",
"home",
"tpufilament"
] | Household > Home Decor | [
"88150/images/image_1_compressed.jpg",
"88150/images/image_2_compressed.jpg",
"88150/images/image_3_compressed.jpg",
"88150/images/image_4_compressed.jpg"
] | [
"88150/stls/Doorknob V2.stl"
] | CC0 | https://www.printables.com/model/88150 | data_0032.tar |
941726 | Soft measuring tape extended handle - Remix | <p>Added a raised flat handle to make turning easier.</p><p>July 2024 :- Updated handle files to match the different base sizes from <a href="https://www.printables.com/@codysechelski">codysechelski</a> project</p> | [
"spool",
"handle",
"measure",
"tape"
] | Hobby & Makers > Tools | [
"941726/images/image_1_compressed.jpg"
] | [
"941726/stls/tape_measure_spool_bigger_handle_16mm.stl",
"941726/stls/tape_measure_spool_bigger_handle_17mm.stl",
"941726/stls/tape_measure_spool_bigger_handle_18mm.stl",
"941726/stls/tape_measure_spool_bigger_handle_19mm.stl",
"941726/stls/tape_measure_spool_bigger_handle_20mm.stl"
] | CC-BY | https://www.printables.com/model/941726 | data_0032.tar |
428300 | Soft measuring tape holder | <p><i><strong>Notice: Not my work (scroll down)</strong></i></p><p>I needed a holder that would fit a 2cm x 246 cm measuring tape, so I found one online and wanted to share it with printables.</p><p>Enjoy!</p><p>Print Settings</p><p>Rafts:</p><p>No</p><p>Supports:</p><p>No</p> | [
"tapemeasure",
"tapemeasureholder",
"softtapemeasure"
] | Hobby & Makers > Tools | [
"428300/images/image_1_compressed.jpg"
] | [
"428300/stls/Measuring_Tape_Holder_-_Base.stl",
"428300/stls/Measuring_Tape_Holder_-_Pin.stl",
"428300/stls/Measuring_Tape_Holder_-_Top.stl"
] | CC-BY | https://www.printables.com/model/428300 | data_0032.tar |
75548 | Soft Pad for the Laptop Saver | <p>This is not really a remix, but an add-on to the Laptop Saver.</p><p>I thought the Laptop Saver was great, but when attached to the desk, it would easily slide left and right if you bumped it from the side.</p><p>So, I made this to act as squishy pads on the top and bottom of the clamp part touching the desk. This i... | [] | Household > Office | [
"75548/images/image_1_compressed.jpg",
"75548/images/image_2_compressed.jpg"
] | [
"75548/stls/Cup Holder Pad v1.stl"
] | CC-BY | https://www.printables.com/model/75548 | data_0032.tar |
411916 | Soft Tape Measure Spool Remix - Parametric | <h3>👇 See sizing instructions below 👇</h3><h3> </h3><h3>Original Tingivese Description</h3><p>This is a remix on <a href="/ohmg/about">ohmg's</a> <a href="https://www.thingiverse.com/thing:3440081">tape measure holder</a>. Thank you for providing the STEP file!</p><p>My wife's tape measure had a rivet holding on... | [
"spool",
"holder",
"measure",
"sewing",
"tape",
"reel",
"thingiverse"
] | Hobby & Makers > Tools | [
"411916/images/image_1_compressed.jpg",
"411916/images/image_2_compressed.jpg",
"411916/images/image_3_compressed.jpg",
"411916/images/image_4_compressed.jpg",
"411916/images/image_5_compressed.jpg",
"411916/images/image_6_compressed.jpg"
] | [
"411916/stls/base_height-16mm_diameter-45mm.stl",
"411916/stls/base_height-16mm_diameter-46mm.stl",
"411916/stls/base_height-16mm_diameter-47mm.stl",
"411916/stls/base_height-16mm_diameter-48mm.stl",
"411916/stls/base_height-16mm_diameter-49mm.stl",
"411916/stls/base_height-16mm_diameter-50mm.stl",
"411... | CC-BY | https://www.printables.com/model/411916 | data_0032.tar |
798905 | Soft Tape Spool | <p>An enclosed spool for a 13mm (0.5in) wide soft tape comprised of four pieces: an inner and and outer top and bottom.</p><p>Includes STEP and 3MF files.</p><p> </p><p><strong>Print Settings</strong></p><p>PLA</p><p>0.4mm nozzle</p><p>0.2mm layer height</p><p>20% infill</p><p> </p><p><strong>Assembly Instruc... | [
"spool",
"organizer",
"storage",
"sewing",
"sewingspool",
"sewingtools",
"softtapemeasure"
] | Hobby & Makers > Organizers | [
"798905/images/image_1_compressed.jpg",
"798905/images/image_2_compressed.jpg",
"798905/images/image_3_compressed.jpg",
"798905/images/image_4_compressed.jpg",
"798905/images/image_5_compressed.jpg",
"798905/images/image_6_compressed.jpg",
"798905/images/image_7_compressed.jpg",
"798905/images/image_8... | [
"798905/stls/Soft Tape Spool_Inner_Bottom.stl",
"798905/stls/Soft Tape Spool_Inner_Top.stl",
"798905/stls/Soft Tape Spool_Outer_Bottom.stl",
"798905/stls/Soft Tape Spool_Outer_Top.stl"
] | CC0 | https://www.printables.com/model/798905 | data_0032.tar |
1300412 | SOFTBALL BASEBALL KEYCHAIN | <p>🥎 Customizable Softball/Baseball Keychain – OpenSCAD File</p><p>This is a <strong>fully customizable keychain</strong> designed in OpenSCAD. It's great for team gifts, personal use, or sports-themed accessories. The file is <strong>free to use</strong>, and designed so you can <strong>easily change the name</strong... | [
"children",
"kids",
"customizable",
"keychain",
"sports",
"mother",
"father",
"dad",
"mom",
"scad",
"softball",
"mommy",
"basketball",
"dads",
"moms",
"mommyu",
"tball"
] | Sports & Outdoor > Outdoor Sports | [
"1300412/images/image_1_compressed.jpg",
"1300412/images/image_2_compressed.jpg",
"1300412/images/image_3_compressed.jpg",
"1300412/images/image_4_compressed.jpg",
"1300412/images/image_5_compressed.jpg",
"1300412/images/image_6_compressed.jpg",
"1300412/images/image_7_compressed.jpg"
] | [
"1300412/stls/Aaliyah.stl",
"1300412/stls/Abby.stl",
"1300412/stls/Aleeyah.stl",
"1300412/stls/Autumn.stl",
"1300412/stls/Brianna.stl",
"1300412/stls/Brinley.stl",
"1300412/stls/Clara.stl",
"1300412/stls/Cora.stl",
"1300412/stls/Emy.stl",
"1300412/stls/Emylu.stl",
"1300412/stls/ERYN.stl",
"130... | CC0 | https://www.printables.com/model/1300412 | data_0032.tar |
465118 | Soil Blocker for 1020 Trays | <p>There are some great soil blocker designs out there, but I had a need to fill a bunch of 1020 trays and I knew I could fit the footprint on the Prusa Mk3. The blocks are approximately 38mm square and fill the tray in a 6 by 12 pattern. The main body of the soil blocker is print-in-place, with the dibbler... | [
"garden",
"seed",
"printinplace",
"soil",
"seedling",
"seedstarter",
"soilblock"
] | Household > Outdoor & Garden | [
"465118/images/image_1_compressed.jpg",
"465118/images/image_2_compressed.jpg"
] | [
"465118/stls/Dibbler.stl",
"465118/stls/Soil Blocker.stl"
] | CC0 | https://www.printables.com/model/465118 | data_0032.tar |
442187 | Solar MC4 connector tool | <p>I was working on wiring up some solar power stuff for a coworker and my big ol' mitts couldn't effectively disconnect the MC4 connectors. Decided I would rig something up to make my life easier. Maybe it'll make your life easier too. Print it out and find out.</p><p> </p><p>UPDATED! I took the suggestions from ... | [
"mc4tool"
] | Hobby & Makers > Tools | [
"442187/images/image_1_compressed.jpg",
"442187/images/image_2_compressed.jpg"
] | [
"442187/stls/Easy off MC4 V1 (Original).stl",
"442187/stls/Easy off MC4 V2 (UPDATED 3.2025).stl"
] | CC-BY | https://www.printables.com/model/442187 | data_0032.tar |
237497 | Solar Panel Alignment Tool | <p>Use this tool to easily align your solar panels with the sun. First find true south (northern hemisphere), or true north (southern hemisphere). Face the panels for your respective direction. Use some double sided tape to temporarily mount the tool to the top corner of your panel. Adjust the angle of your panel till ... | [
"tool",
"panel",
"solar",
"solarpanel",
"alignment"
] | Hobby & Makers > Tools | [
"237497/images/image_1_compressed.jpg"
] | [
"237497/stls/Solar Guage v1.stl"
] | CC0 | https://www.printables.com/model/237497 | data_0032.tar |
179079 | Solar System |
<p>I really liked the original design It is fantastic.
<a href="https://www.thingiverse.com/thing:1746153">https://www.thingiverse.com/thing:1746153</a></p>
<p>But I really wanted there to be texture on the planets and slightly bigger. So I grabbed each of the actual planet scans from different spacecraft over the ... | [
"rings",
"moon",
"jupiter",
"mars",
"solar",
"earth",
"sun",
"thingiverse",
"neptune",
"mercury",
"planets",
"uranus",
"venus"
] | Learning > Physics & Astronomy | [
"179079/images/image_1_compressed.jpg",
"179079/images/image_2_compressed.jpg",
"179079/images/image_3_compressed.jpg",
"179079/images/image_4_compressed.jpg",
"179079/images/image_5_compressed.jpg",
"179079/images/image_6_compressed.jpg",
"179079/images/image_7_compressed.jpg",
"179079/images/image_8... | [
"179079/stls/baseleft.stl",
"179079/stls/baseright.stl",
"179079/stls/Earth.stl",
"179079/stls/jupiterbottom.stl",
"179079/stls/jupitertop.stl",
"179079/stls/Mars.stl",
"179079/stls/Mercury.stl",
"179079/stls/Moon.stl",
"179079/stls/neptune.stl",
"179079/stls/saturnbottom.stl",
"179079/stls/satu... | CC-BY | https://www.printables.com/model/179079 | data_0032.tar |
780735 | Solar System Book Mark | A simple bookmark depicting planets of the solar system | Download free 3D printable STL models | [] | Hobby & Makers > Organizers | [
"780735/images/image_1_compressed.jpg",
"780735/images/image_2_compressed.jpg",
"780735/images/image_3_compressed.jpg"
] | [
"780735/stls/SolarSystemBookMark.stl"
] | CC0 | https://www.printables.com/model/780735 | data_0032.tar |
46500 | Solder Cableholder | <p>When you want to solder two cables together and dont have four arms to both solder and hold the cables.</p>
<p>All kind of cables fit into the different slots.</p>
<p>A "helping hand" can damage your cables, especially if the cables are hot. This design will protect your cables from that issue.</p>
<p>Put them in, a... | [
"cable",
"soldering",
"solder",
"thingiverse",
"cableholder"
] | Hobby & Makers > Tools | [
"46500/images/image_1_compressed.jpg",
"46500/images/image_2_compressed.jpg",
"46500/images/image_3_compressed.jpg",
"46500/images/image_4_compressed.jpg",
"46500/images/image_5_compressed.jpg"
] | [
"46500/stls/solder_cablestation.stl",
"46500/stls/solder_cablestation_short_base.stl"
] | CC-BY | https://www.printables.com/model/46500 | data_0032.tar |
47000 | Solder dispenser with custom solder spool | <p>just use adaptive layer height or .2mm if not available</p>
<h3>Print instructions</h3><h3>Category: Electronics Summary</h3>
<p>just use adaptive layer height or .2mm if not available</p> | [
"diy",
"soldering",
"hobby",
"18650",
"solder",
"solderingiron",
"thingiverse",
"make"
] | Hobby & Makers > Electronics | [
"47000/images/image_1_compressed.jpg",
"47000/images/image_2_compressed.jpg",
"47000/images/image_3_compressed.jpg",
"47000/images/image_4_compressed.jpg",
"47000/images/image_5_compressed.jpg",
"47000/images/image_6_compressed.jpg",
"47000/images/image_7_compressed.jpg"
] | [
"47000/stls/base.stl",
"47000/stls/lid.stl",
"47000/stls/roll_part_1.stl",
"47000/stls/roll_part_2.stl"
] | CC-BY | https://www.printables.com/model/47000 | data_0032.tar |
271409 | Solder Fume Extractor |
<p>"Inspired by" the Hakko FA-400, this is a solder fume extractor designed to be used either horizontally for greater suction speed or verically for greater suction volume. In the .stl files attached, it is configured to use a 120mm fan and the 130mm by 130mm carbon filter that goes with the actual Hakko extractor ... | [
"filter",
"soldering",
"fan",
"thingiverse",
"fumefilter"
] | Hobby & Makers > Other Ideas | [
"271409/images/image_1_compressed.jpg",
"271409/images/image_2_compressed.jpg"
] | [
"271409/stls/filter_holder.stl",
"271409/stls/fume_extractor.stl"
] | CC-BY | https://www.printables.com/model/271409 | data_0032.tar |
264165 | Solder Fume Extractor (120mm fan) | <p>Another fume extractor. I looked at what was available and made my own. I took the idea of a slotted housing for the filter from another design and then built that and everything else around the fan body. Fitting the wiring into the control box was a bit tight but It's fairly easy to print and has room for a standar... | [
"fume",
"soldering",
"120mm",
"thingiverse",
"fumeextractor",
"120mmfan",
"cpufan"
] | Hobby & Makers > Tools | [
"264165/images/image_1_compressed.jpg",
"264165/images/image_10_compressed.jpg",
"264165/images/image_2_compressed.jpg",
"264165/images/image_3_compressed.jpg",
"264165/images/image_4_compressed.jpg",
"264165/images/image_5_compressed.jpg",
"264165/images/image_6_compressed.jpg",
"264165/images/image_... | [
"264165/stls/body.stl",
"264165/stls/control-box.stl",
"264165/stls/filter-housing.stl"
] | CC-BY | https://www.printables.com/model/264165 | data_0032.tar |
319879 | Solder Fumes Fan and Filter Stand (120mm) | <p>The assembly should be self explainable, the feet should be pressed into the body as far as possible, the slots became narrower to the end so the feet don't loose to easy.</p><p>I suggest printing the body laying flat and the feet upright. Be aware that the left and right feet are symmetric but not equal. The model ... | [
"filter",
"stand",
"smoke",
"air",
"soldering",
"electronics",
"fan",
"carbon",
"solder",
"extractor",
"120mm",
"fumeextractor",
"solderfumeextractor"
] | Hobby & Makers > Tools | [
"319879/images/image_1_compressed.jpg",
"319879/images/image_2_compressed.jpg"
] | [
"319879/stls/body.stl",
"319879/stls/foot-left.stl",
"319879/stls/foot-right.stl"
] | GPL3.0 | https://www.printables.com/model/319879 | data_0032.tar |
663113 | Solder Helper | <p>A simple but strong solder helper I made 3010 fan version and a 4010 fan version and one with no fan.</p><p> </p><p>BOM If Printed With Fan</p><p>x 2 M3 x 10 </p><p>x 2 M3 x 20</p><p>x 1 3010 or 4010 </p><p>x 1 switch</p><p>x 1 plug</p><p> </p><p>BOM If Printed Without Fan</p><p>x 2 M3 x 10</p><p... | [
"soldering",
"helper",
"3010"
] | Hobby & Makers > Electronics | [
"663113/images/image_1_compressed.jpg",
"663113/images/image_2_compressed.jpg",
"663113/images/image_3_compressed.jpg",
"663113/images/image_4_compressed.jpg",
"663113/images/image_5_compressed.jpg",
"663113/images/image_6_compressed.jpg",
"663113/images/image_7_compressed.jpg",
"663113/images/image_8... | [
"663113/stls/Clip x 2.stl",
"663113/stls/Solder Helper 3010 Hex.stl",
"663113/stls/Solder Helper 3010 No Bottom Hex.stl",
"663113/stls/Solder Helper 4010 Hex.stl",
"663113/stls/Solder Helper 4010 No Bottom Hex.stl",
"663113/stls/Solder Helper No Fan No Bottom Hex.stl",
"663113/stls/Solder Helper No Fan.... | CC-BY | https://www.printables.com/model/663113 | data_0032.tar |
357892 | Solder Paste & Flux Dispenser |
<p><strong>Remix Changes:</strong></p>
<ul>
<li>Removed the groove on the screw</li>
<li>Removed the grooves counter on the body</li>
<li>More tolerance on the body for the screw (0.5mm on each side). Compensation for bridgning.</li>
<li>Removed the Holes in the nut as they serve only visual purpose</li>
<li>Made th... | [
"soldering",
"solder",
"dispenser",
"paste",
"thingiverse",
"flux"
] | Hobby & Makers > Tools | [
"357892/images/image_1_compressed.jpg",
"357892/images/image_2_compressed.jpg",
"357892/images/image_3_compressed.jpg",
"357892/images/image_4_compressed.jpg",
"357892/images/image_5_compressed.jpg",
"357892/images/image_6_compressed.jpg",
"357892/images/image_7_compressed.jpg",
"357892/images/image_8... | [
"357892/stls/Body-A.stl",
"357892/stls/Body-B.stl",
"357892/stls/Body.stl",
"357892/stls/Nut.stl",
"357892/stls/tread_rod.stl"
] | CC-BY | https://www.printables.com/model/357892 | data_0032.tar |
165334 | Solder paste dispenser | <p>Solder paste dispenser.<br>Solder paste is squeezed out when you push solder paste tube down.<br>Infill 15% is enough except for axis.stl. I suggest use 100% infill there.<br>Printed in PETG, but PLA should also work fine.</p> | [] | Hobby & Makers > Electronics | [
"165334/images/image_1_compressed.jpg",
"165334/images/image_2_compressed.jpg",
"165334/images/image_3_compressed.jpg",
"165334/images/image_4_compressed.jpg"
] | [
"165334/stls/axis.stl",
"165334/stls/base.stl",
"165334/stls/bolt.stl",
"165334/stls/handle.stl",
"165334/stls/nut.stl"
] | CC0 | https://www.printables.com/model/165334 | data_0032.tar |
16568 | Solder pen | <p>Simple solder pen with curvy pattern in the cap to prevent the solder end from sliding back in the tube.</p>
<p>Small good for 0.5mm solder.<br/>
Medium good for 0.8mm solder.</p>
<p>I used a old Bic pen in a drill as a form to coil the solder.</p>
<h3>Print instructions</h3><p>Category: Electronics</p> | [
"solderingiron",
"thingiverse",
"solderingstation",
"solderingtool",
"solderholder",
"solderspool"
] | Hobby & Makers > Electronics | [
"16568/images/image_1_compressed.jpg",
"16568/images/image_2_compressed.jpg",
"16568/images/image_3_compressed.jpg",
"16568/images/image_4_compressed.jpg",
"16568/images/image_5_compressed.jpg",
"16568/images/image_6_compressed.jpg",
"16568/images/image_7_compressed.jpg"
] | [
"16568/stls/nozzle_large.stl",
"16568/stls/nozzle_medium.stl",
"16568/stls/nozzle_small.stl",
"16568/stls/solder_pen3.stl"
] | CC-BY | https://www.printables.com/model/16568 | data_0032.tar |
489505 | Solder Reel Holder using 608 bearing | <p>I modified @Duane's model to use two of the common 608 skateboard type bearing (7 x 22mm) and also an M4 screw to hold it together as that's what I had to hand.</p><p>I used a paper clip and some glue to create the guide on the front.</p> | [
"spool",
"holder",
"608",
"solder",
"reel"
] | Hobby & Makers > Electronics | [
"489505/images/image_1_compressed.jpg",
"489505/images/image_2_compressed.jpg",
"489505/images/image_3_compressed.jpg"
] | [
"489505/stls/SRH01 - Base 608 bearing.stl",
"489505/stls/SRH02 - Screw 608 bearing M4 washer.stl",
"489505/stls/SRH03 - Nut.stl",
"489505/stls/SRH04 - Screw 608 bearing M4 screw.stl"
] | CC-BY | https://www.printables.com/model/489505 | data_0032.tar |
9318 | Solder reel holder, vertical, with spool lock | <p>A vertical solder reel holder for desktop use. It has a guide and a spool lock to prevent unwinding while being moved about.<br/>
There is an M6 thread in the guide arm for a strengthening bar, and an M12 thread in the main spindle for either a strengthening bar or to stack multiple holders for minimum desk space us... | [
"spool",
"solder",
"reel"
] | Hobby & Makers > Tools | [
"9318/images/image_1_compressed.jpg",
"9318/images/image_2_compressed.jpg"
] | [
"9318/stls/more-washers.stl",
"9318/stls/the-vertical-solder-reel-holder-500g.stl"
] | CC-BY | https://www.printables.com/model/9318 | data_0032.tar |
98894 | Solder Spool Holder | <blockquote><p>Update: "wheel_holder_noHex.3mf" is uploaded if the hexagonal cutouts is not for you.</p></blockquote><p>Made a simple cad model to hold a heavy Solder wheel for people to use at my workplace.</p><p>Solder roll supported:<br>64mm - high max<br>80mm - diameter max<br>14mm - Inside diameter</p><p>There is ... | [
"diy",
"soldering",
"solder",
"solderingaid",
"diyelectronics",
"thingiverse",
"solderingstation"
] | Hobby & Makers > Electronics | [
"98894/images/image_1_compressed.jpg",
"98894/images/image_2_compressed.jpg",
"98894/images/image_3_compressed.jpg",
"98894/images/image_4_compressed.jpg",
"98894/images/image_5_compressed.jpg",
"98894/images/image_6_compressed.jpg",
"98894/images/image_7_compressed.jpg",
"98894/images/image_8_compres... | [
"98894/stls/Base.stl",
"98894/stls/Base_noHex.stl",
"98894/stls/Cap.stl",
"98894/stls/Shaft.stl",
"98894/stls/SolderHolder_Quickprint.stl",
"98894/stls/SolderHolder_Quickprint_Fix.stl"
] | CC-BY | https://www.printables.com/model/98894 | data_0032.tar |
227026 | Solder Spool Holder With Magnet Cutouts for MEtal Plate Solder Stations | <p>Added cutouts for magnets, use as many as you like to make it as strong as you like, the magnets should just press in, however, a touch of crazy glue make them permanent. </p><p>These magnetic “helping hands” solder station are truly badass if you are interested (see the spool in below pic): </p><ul><li>M... | [
"spool",
"light",
"holder",
"stand",
"fume",
"magnets",
"soldering",
"electronics",
"magnetic",
"helping",
"hands",
"solder",
"flux",
"line",
"loc"
] | Hobby & Makers > Electronics | [
"227026/images/image_1_compressed.jpg",
"227026/images/image_2_compressed.jpg",
"227026/images/image_3_compressed.jpg"
] | [
"227026/stls/Cap (2).stl",
"227026/stls/Magnet-wheel_holder.stl",
"227026/stls/Shaft.stl"
] | CC-BY | https://www.printables.com/model/227026 | data_0032.tar |
204146 | Solder Spool Stand |
<p>A simple holder for 500g spools of solder</p>
<p>The shaft is retained in recesses in the side walls so that it will not dislodge in use.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>i3 MK3</p></div>
<p><strong... | [
"soldering",
"solder",
"thingiverse",
"solderingstation"
] | Hobby & Makers > Tools | [
"204146/images/image_1_compressed.jpg",
"204146/images/image_2_compressed.jpg",
"204146/images/image_3_compressed.jpg",
"204146/images/image_4_compressed.jpg"
] | [
"204146/stls/base-mk2.stl",
"204146/stls/shaft-mk2.stl"
] | CC-BY | https://www.printables.com/model/204146 | data_0032.tar |
164301 | Solder Station Tool Organizer | <p>Remixed solder station from the ThingiVerse link below. The main changes are the space for solder wire spools which have been enlarged.</p><p> </p><p>The solder station design have been changed to suit my needs but feel free to grab the source file from GrabCad below if you want to make changes.</p><p> </p... | [] | Hobby & Makers > Organizers | [
"164301/images/image_1_compressed.jpg",
"164301/images/image_2_compressed.jpg"
] | [
"164301/stls/Slicer Project File.stl",
"164301/stls/Solder Roller_v2.stl",
"164301/stls/Tip Tinner & Wick Holder.stl",
"164301/stls/Tool Holder.stl"
] | CC0 | https://www.printables.com/model/164301 | data_0032.tar |
669086 | Solder Tip Holder | <p>A holder for up to 6 of your solder tips it has a course thread to spin it off quickly. </p> | [
"holder",
"container",
"thread",
"solder",
"soldertips"
] | Hobby & Makers > Organizers | [
"669086/images/image_1_compressed.jpg",
"669086/images/image_2_compressed.jpg",
"669086/images/image_3_compressed.jpg",
"669086/images/image_4_compressed.jpg",
"669086/images/image_5_compressed.jpg",
"669086/images/image_6_compressed.jpg"
] | [
"669086/stls/Bottom.stl",
"669086/stls/Cap.stl"
] | CC-BY | https://www.printables.com/model/669086 | data_0032.tar |
167798 | Solder-Holder | <p>A dispenser for solder rolls with a hole diameter of 10mm - 15mm or 28mm - 32mm<br>Optional with flux-holder for 28mm flux-bottles</p> | [
"holder",
"solder",
"diyelectronics"
] | Hobby & Makers > Electronics | [
"167798/images/image_1_compressed.jpg"
] | [
"167798/stls/SolderHolderComplete.stl",
"167798/stls/SolderHolderComplete_28Flux.stl"
] | CC0 | https://www.printables.com/model/167798 | data_0032.tar |
156930 | Soldering Aid / Helping Hands |
<p>UPDATE: 17/10/2018</p>
<p>Added a longer base with provision to add weight in the form of either with a steel or brass bar 8mm x 50mm x 100mm or as I did, small lead shot of the kind used in scuba diving weights.</p>
<p>UPDATE: 13/10/2018</p>
<p>Modified to accept springs to auto close the jaws and extended the t... | [
"soldering",
"helpinghands",
"clamp",
"solderingaid",
"thingiverse",
"cableholder",
"helpinghand",
"wireholder",
"solderingtool"
] | Hobby & Makers > Electronics | [
"156930/images/image_1_compressed.jpg",
"156930/images/image_2_compressed.jpg",
"156930/images/image_3_compressed.jpg",
"156930/images/image_4_compressed.jpg",
"156930/images/image_5_compressed.jpg",
"156930/images/image_6_compressed.jpg",
"156930/images/image_7_compressed.jpg",
"156930/images/image_8... | [
"156930/stls/100mm_Long_Base.stl",
"156930/stls/LH_Fixed_Arm.stl",
"156930/stls/LH_Moving_Arm.stl",
"156930/stls/RH_Fixed_Arm.stl",
"156930/stls/RH_Moving_Arm.stl",
"156930/stls/Soldering_Aid_Base.stl",
"156930/stls/Weighted_Base.stl",
"156930/stls/Weighted_Base_Slot_Cover.stl"
] | CC-BY | https://www.printables.com/model/156930 | data_0032.tar |
303175 | Soldering Clamp | <p>I've used the base and arms as-is. Added a pivot joint and clamp holder.</p><p>Recommended infill:</p><ul><li>Arms and base: 20%</li><li>Pivot joint and clamp holder: 40%</li></ul><p>All parts can be printed without support.</p><p>The hole for the clamp is intentionally thight. The best way to put the clamp in the h... | [
"hand",
"soldering",
"clamp",
"solder"
] | Hobby & Makers > Tools | [
"303175/images/image_1_compressed.jpg",
"303175/images/image_2_compressed.jpg",
"303175/images/image_3_compressed.jpg"
] | [
"303175/stls/Arm 90 Straight.stl",
"303175/stls/Base Flat.stl",
"303175/stls/Clamp Holder.stl",
"303175/stls/Pivot Female.stl",
"303175/stls/Pivot Male.stl"
] | CC-BY | https://www.printables.com/model/303175 | data_0032.tar |
215303 | Soldering fingers - simple remix with screws/bits tray |
<p>Simple remix that adds two walls/edges to make the bottom a suitable tray for tiny bits like screws etcetera.</p>
<p>Would love it if you post a picture of a make? A like never hurts either :)</p>
Category: Tool Holders & Boxes
| [
"thingiverse"
] | Hobby & Makers > Tools | [
"215303/images/image_1_compressed.jpg",
"215303/images/image_2_compressed.jpg",
"215303/images/image_3_compressed.jpg"
] | [
"215303/stls/Remix-soldering-fingers.stl"
] | CC-BY | https://www.printables.com/model/215303 | data_0032.tar |
749093 | Soldering Flux Extruder | <p>Handy tool for every soldering station. Accepts standard syringe style flux cartridges. Turn the know for precise extrusion. </p><p> </p><p>If you have trouble with bed adhesion while printing the screw, there a few tips:</p><ul><li>slow down</li><li>use 'external perimeters first' option.</li><li>use the ... | [
"soldering",
"flux"
] | 3D Printers > Accessories | [
"749093/images/image_1_compressed.jpg",
"749093/images/image_2_compressed.jpg",
"749093/images/image_3_compressed.jpg",
"749093/images/image_4_compressed.jpg",
"749093/images/image_5_compressed.jpg",
"749093/images/image_6_compressed.jpg",
"749093/images/image_7_compressed.jpg",
"749093/images/image_8... | [
"749093/stls/body.stl",
"749093/stls/nut.stl",
"749093/stls/paste_extruder.stl",
"749093/stls/rod.stl",
"749093/stls/rod_support.stl"
] | CC0 | https://www.printables.com/model/749093 | data_0032.tar |
741918 | Soldering Helper Jack | <p>horizontal holding</p><figure class="image"><img src="https://media.printables.com/media/prints/741918/rich_content/ec6d1ad8-21bc-4056-a4ad-82eeb1e25859/dsc05812-24-037-solderhand-tip.jpg#%7B%22uuid%22%3A%229d722193-8c8a-46f3-bf4d-3115ecaa2a5b%22%2C%22w%22%3A1440%2C%22h%22%3A1080%7D"></figure><p>vertical holding</p>... | [
"soldering",
"openscad",
"pcbholder",
"wireholder",
"scad",
"solderingtool"
] | Hobby & Makers > Tools | [
"741918/images/image_1_compressed.jpg",
"741918/images/image_10_compressed.jpg",
"741918/images/image_11_compressed.jpg",
"741918/images/image_2_compressed.jpg",
"741918/images/image_3_compressed.jpg",
"741918/images/image_4_compressed.jpg",
"741918/images/image_5_compressed.jpg",
"741918/images/image... | [
"741918/stls/24-037-SolderHand-Tip.stl",
"741918/stls/24-037-SolderHand-Tip2.stl",
"741918/stls/24-037-SolderHand.stl",
"741918/stls/24-037-SolderHandKnurlHeadM4.stl",
"741918/stls/24-064-Greifer.stl"
] | CC0 | https://www.printables.com/model/741918 | data_0032.tar |
144801 | Soldering Helping Hands Re-Remix | <h3>Re-remixed third hand for soldering wires</h3><p>This version has an adjustable distance between the clamps, as well as some internal weights inside the base in order to hold everything steady.</p><p>The weight makes a <i>big</i> difference!</p><p>The base uses two 80x40x2mm metal bars which are pretty common in ha... | [
"tool",
"soldering",
"helpinghands",
"tools",
"solderingaid",
"handtools",
"thingiverse",
"solderingstation",
"solderingstand",
"solderingtool",
"thirdhand"
] | Hobby & Makers > Electronics | [
"144801/images/image_1_compressed.jpg",
"144801/images/image_2_compressed.jpg"
] | [
"144801/stls/Jim_Solder_Fingers_Jaw_base_mod.stl",
"144801/stls/Jim_Solder_Fingers_Jaw_full.stl",
"144801/stls/Jim_Solder_Fingers_Jaw_Rotating.stl",
"144801/stls/Jim_Solder_Fingers_Jaw_Static_mod.stl",
"144801/stls/large_display_Jim_Solder_Fingers_Jaw_Rotating_144801.stl",
"144801/stls/large_display_Jim_S... | CC-BY | https://www.printables.com/model/144801 | data_0032.tar |
144787 | Soldering Helping Hands Remixed³ | <h3>Soldering Helping hands, re-re-remixed</h3><p>A further evolution of the <a href="https://www.thingiverse.com/thing:4029106">re-remix</a>, based on <a href="https://www.thingiverse.com/thing:3709969">this</a>, inspired by <a href="https://www.thingiverse.com/thing:2757071">this</a> which originated from <a href="ht... | [
"tool",
"soldering",
"helpinghands",
"tools",
"solderingaid",
"handtools",
"thingiverse",
"solderingstation",
"solderingstand",
"solderingtool",
"thirdhand"
] | Hobby & Makers > Electronics | [
"144787/images/image_1_compressed.jpg",
"144787/images/image_2_compressed.jpg",
"144787/images/image_3_compressed.jpg",
"144787/images/image_4_compressed.jpg",
"144787/images/image_5_compressed.jpg"
] | [
"144787/stls/hands_clamps_only.stl",
"144787/stls/hands_full_plate.stl",
"144787/stls/hands_solid_base.stl",
"144787/stls/hands_solid_core.stl"
] | CC-BY | https://www.printables.com/model/144787 | data_0032.tar |
692373 | Soldering Iron Tip Case | Remixed to be able to use the case for normal soldering iron tips | [
"case",
"soldering",
"solderingiron",
"tips",
"cnckitchen"
] | Hobby & Makers > Tools | [
"692373/images/image_1_compressed.jpg",
"692373/images/image_2_compressed.jpg"
] | [
"692373/stls/Soldering_Tips_Case_1.stl",
"692373/stls/Soldering_Tips_Case_2.stl"
] | CC-BY | https://www.printables.com/model/692373 | data_0032.tar |
108254 | Soldering Iron Tip Cleaner | <p>I using normal scourer from the supermarket.</p> | [
"soldering",
"solder",
"cleaner"
] | Hobby & Makers > Tools | [
"108254/images/image_1_compressed.jpg",
"108254/images/image_2_compressed.jpg",
"108254/images/image_3_compressed.jpg"
] | [
"108254/stls/Soldering Iron Tip Cleaner.stl"
] | CC0 | https://www.printables.com/model/108254 | data_0032.tar |
397796 | Soldering tool with clamp mechanism | <p>Print clamp 2 times in horizontal position. I recomend PETG.</p><p>Press the two clamps into the bottom part till it clicks. Squeeze the clamps to fix the wire.</p><p>Happy printing!</p><figure class="media"><oembed url="https://www.youtube.com/watch?v=h4SaH9TNZxE"></oembed></figure> | [
"printinplace",
"soldering",
"clamp",
"squeezer",
"pip"
] | Hobby & Makers > Electronics | [
"397796/images/image_1_compressed.jpg",
"397796/images/image_2_compressed.jpg"
] | [
"397796/stls/bottom.stl",
"397796/stls/clamp.stl"
] | CC-BY | https://www.printables.com/model/397796 | data_0032.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.