model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
961932 | Sovol SV08 completely closed top lit | <p>A completely closed top lit for the sv08. <br>The original ventilation holes and the space for the spool holder on the right are closed. It's designed for an enclosure to keep the heat inside and use a top down filament path.</p><p>Have fun.</p> | [
"enclosure",
"sovol",
"sv08",
"sovolsv08",
"toplit"
] | 3D Printers > Other Printer Parts & Upgrades | [
"961932/images/image_1_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/961932 | data_0033.tar |
946451 | Sovol SV08 Doors (JLS Mod V2) | <p>This model uses only the existing holes in the frame of the SV08, it also uses Sovol's magnetic fixing system and handles. Although the magnetic fixing system has ben redesigned for a sotfter close, using only magnets, bolts and printed parts.</p><p>The DXF is included for cutting the pannels to measure.</p><p... | [
"door",
"enclosure",
"doors",
"sovol",
"sv08",
"hindges"
] | 3D Printers > Other Printer Parts & Upgrades | [
"946451/images/image_1_compressed.jpg",
"946451/images/image_2_compressed.jpg",
"946451/images/image_3_compressed.jpg",
"946451/images/image_4_compressed.jpg",
"946451/images/image_5_compressed.jpg"
] | [
"946451/stls/Magnetic fixing piece A_JLS_x2.stl",
"946451/stls/Magnetic fixing piece B_JLS_x2.stl",
"946451/stls/Magnetic fixing piece DOWN_JLS_x1.stl",
"946451/stls/Magnetic fixing piece UP_JLS_x1.stl",
"946451/stls/SV08 Pannel Washer_x28.stl",
"946451/stls/SV08_Doors_HindgeLD_x1.stl",
"946451/stls/SV0... | CC0 | https://www.printables.com/model/946451 | data_0033.tar |
956781 | Sovol SV08 drag chain system | <p>This is a fully printed dragchain-system for the SV08. It is pretty useful when you build an enclosure for you printer to avoid cables at the buildplate.</p><p>The<i> Drag chain fixed joint</i> and the <i>Under the drag chain fixed joint </i>are the original Sovol parts you can find at <i>SV08 Printing Upgrade Parts... | [
"chain",
"dragchain",
"sovol",
"sv08",
"sovolsv08"
] | 3D Printers > Other Printer Parts & Upgrades | [
"956781/images/image_1_compressed.jpg",
"956781/images/image_2_compressed.jpg",
"956781/images/image_3_compressed.jpg"
] | [
"956781/stls/drag chain element with clip (20x).stl",
"956781/stls/Drag chain fixed joint.stl",
"956781/stls/Under the drag chain fixed joint.stl"
] | CC-BY | https://www.printables.com/model/956781 | data_0033.tar |
1104389 | Sovol SV08 Elecronics 8010 fan mount | <p>All the mounts I could find mounted the fan too close to the underlying surface when using the original feet, so I had to design my own.</p> | [
"sv08",
"sovolsv08"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1104389/images/image_1_compressed.jpg",
"1104389/images/image_2_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/1104389 | data_0033.tar |
876440 | Sovol SV08 Electronics Cover | <p>With this mod, there are several opportunities for mounting various fans up to 180x180, its made of 2 separate parts, that fit using M3 bolts/nuts.</p><p>If you validate this mod, or have any suggestions or improvements, please let me know.</p><p>Thankyou for all the Sovol Community for all the support and informati... | [
"sovol",
"sv08"
] | 3D Printers > Other Printer Parts & Upgrades | [
"876440/images/image_1_compressed.jpg"
] | [
"876440/stls/SV08 Electronics Cover1.stl",
"876440/stls/SV08 Electronics Cover2.stl"
] | CC0 | https://www.printables.com/model/876440 | data_0033.tar |
865869 | Sovol SV08 Exhaust Filter | <figure class="media"><oembed url="https://www.youtube.com/watch?v=88_2HGAqAcY&t=90s"></oembed></figure><p>This is an original design made by Voron we just adapt it to the top hat that we made for the Sovol SV08</p><p> </p><p><a href="https://www.printables.com/model/865851-sovol-sv08-top-hat"><strong>https://... | [
"carbon",
"hepa",
"exhaust",
"exhaustfan",
"carbonfilter",
"voron",
"hepafilter",
"sovol",
"exhaustfilter"
] | 3D Printers > Other Printer Parts & Upgrades | [
"865869/images/image_1_compressed.jpg",
"865869/images/image_2_compressed.jpg",
"865869/images/image_3_compressed.jpg",
"865869/images/image_4_compressed.jpg",
"865869/images/image_5_compressed.jpg",
"865869/images/image_6_compressed.jpg",
"865869/images/image_7_compressed.jpg",
"865869/images/image_8... | [
"865869/stls/exhaust box cover.stl",
"865869/stls/exhaust fan cover.stl",
"865869/stls/hepa filter back covor Voron logo.stl",
"865869/stls/hepa filter fan grill Voron logo.stl",
"865869/stls/hepa filter hex grill.stl",
"865869/stls/hepa filter main body.stl",
"865869/stls/Top Hat -Exhaust filter withou... | GPL3.0 | https://www.printables.com/model/865869 | data_0033.tar |
1052416 | Sovol SV08 Feet module | <p>One Version fits the orginal feet within, use the screw for the feet to attach and just press fit the feet within the hole,, The TPU version is for gluing,, Included Fusion 360 file for modification to your own likings ,,</p><p>Use Mirror in fusion 360 to fit all 4 corners. </p> | [
"feets",
"sovolsv08"
] | 3D Printers > Test Models | [
"1052416/images/image_1_compressed.jpg",
"1052416/images/image_2_compressed.jpg",
"1052416/images/image_3_compressed.jpg",
"1052416/images/image_4_compressed.jpg"
] | [
"1052416/stls/Foot Pad 1.stl",
"1052416/stls/Foot Pad 2.stl",
"1052416/stls/Foot Pad 3.stl",
"1052416/stls/Foot Pad 4.stl",
"1052416/stls/Foot Pad Orginal.stl"
] | CC0 | https://www.printables.com/model/1052416 | data_0033.tar |
1081276 | Sovol SV08 Feet module Remix with squash balls | <p>Hello,<br>ive remixed Infected by max feets, added voron style M3x4x5 threaded insterts and used Squash ball holders from Mercury One Skirt. Only diference is that i didnt have any M4 threaded inserts so i just used M3x10 with washer and it works perfectly.</p><p>For print i used standard voron setings 0.2, 5 TOP/BO... | [
"sovol",
"squashballfeet",
"sv08",
"sovolsv08"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1081276/images/image_1_compressed.jpg",
"1081276/images/image_2_compressed.jpg",
"1081276/images/image_3_compressed.jpg",
"1081276/images/image_4_compressed.jpg",
"1081276/images/image_5_compressed.jpg",
"1081276/images/image_6_compressed.jpg"
] | [
"1081276/stls/SV08 Foot Squash ball-1.stl",
"1081276/stls/SV08 Foot Squash ball-2.stl",
"1081276/stls/SV08 Foot Squash ball-3.stl",
"1081276/stls/SV08 Foot Squash ball-4.stl",
"1081276/stls/SV08 Foot Squash ball-Holder.stl"
] | CC0 | https://www.printables.com/model/1081276 | data_0033.tar |
879265 | Sovol SV08 Hinge and door handle | <figure class="media"><oembed url="https://www.youtube.com/watch?v=88_2HGAqAcY&t=90s"></oembed></figure><p> </p><p>Hello everyone</p><p><br> New Version Is here thanks to the community members that helped with the perfect fitment</p><p>In the Cad you will find all the screws and heat set insert that... | [
"print",
"handle",
"door",
"hinge",
"printinplace",
"in",
"voron",
"sovol",
"place",
"sv08"
] | 3D Printers > Other Printer Parts & Upgrades | [
"879265/images/image_1_compressed.jpg",
"879265/images/image_2_compressed.jpg",
"879265/images/image_3_compressed.jpg",
"879265/images/image_4_compressed.jpg",
"879265/images/image_5_compressed.jpg",
"879265/images/image_6_compressed.jpg",
"879265/images/image_7_compressed.jpg"
] | [
"879265/stls/door handle down.stl",
"879265/stls/door handle up.stl",
"879265/stls/door stoper down.stl",
"879265/stls/hinge left door down.stl",
"879265/stls/hinge left door up.stl",
"879265/stls/hinge left frame down.stl",
"879265/stls/hinge left frame up.stl",
"879265/stls/hinge right door down.stl... | GPL3.0 | https://www.printables.com/model/879265 | data_0033.tar |
1413008 | SOVOL SV08 Lid & print-plate/print-bed holder with optional HDMI monitor cable guide | <p>This holder can hold up to two print beds and a large glass enclosure lid for SOVOL SV08. It is mounted on the side of the printer using two M3 x 10 mm screws on each side.</p><p><strong>***UPDATE ***</strong></p><p>There were requests for a holder that holds more plates. I've added a new design that holds up to 4 p... | [
"holder",
"lid",
"cablemanagement",
"buildplate",
"cableholder",
"printbed",
"cableguide",
"cableorganizer",
"sovol",
"hotplate",
"printbedstorage",
"sv08",
"sovolsv08",
"lidstorage",
"lidholer"
] | 3D Printers > Accessories | [
"1413008/images/image_1_compressed.jpg"
] | [
"1413008/stls/4_Build_Plates_holder_left.stl",
"1413008/stls/4_Build_Plates_holder_right.stl",
"1413008/stls/Lid+2Plates_holder_Cable_Guide_Left.stl",
"1413008/stls/Lid+2Plates_holder_Cable_Guide_Right.stl",
"1413008/stls/Lid+2Plates_holder_Left.stl",
"1413008/stls/Lid+2Plates_holder_Right.stl"
] | CC0 | https://www.printables.com/model/1413008 | data_0033.tar |
918971 | Sovol SV08 Minimal Toolhead Cover | <h3>Description</h3><p>When I printed my first large model on the SV08, my Nozzle clogged multiple times. I may be wrong, but my assumption here is that it's not a great idea to enclose the hotend heatsink in a plastic shell, thus killing any kind of airflow.</p><p>So I created this minimal toolhead cover that lets air... | [
"freecad",
"sovol",
"sv08",
"sovolsv08"
] | 3D Printers > Other Printer Parts & Upgrades | [
"918971/images/image_1_compressed.jpg",
"918971/images/image_2_compressed.jpg",
"918971/images/image_3_compressed.jpg",
"918971/images/image_4_compressed.jpg",
"918971/images/image_5_compressed.jpg"
] | [
"918971/stls/SV08 Minimal Toolhead Cover with clips.stl",
"918971/stls/SV08 Minimal Toolhead Cover.stl"
] | CC-BY | https://www.printables.com/model/918971 | data_0033.tar |
1038697 | Sovol SV08 rear part cooling fan duct | <p>After accidentally homing while there were still printed parts on the bed the original broke.</p><p>All step files are available on Github. This just adds a small extrusion to the bottom to make for a flat bottom.</p><p>V2 also adds a piece on the side to keep the fan from sagging and eventually hitting objects whil... | [
"cooler",
"bracket",
"fan",
"repair",
"spare",
"cooling",
"fanduct",
"shroud",
"fanshroud",
"sparepart",
"repairpart",
"sovol",
"toolhead",
"partcoolingduct",
"rearfan",
"sv08",
"airdeflector2",
"backfan"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1038697/images/image_1_compressed.jpg"
] | [
"1038697/stls/RearPartCoolingDuct.stl",
"1038697/stls/RearPartCoolingDuctV2.stl"
] | GPL3.0 | https://www.printables.com/model/1038697 | data_0033.tar |
928574 | Sovol SV08 SSR/PSU 120mm Fan cover With Speed Adjustment | <p>I like the idea from <a href="https://www.printables.com/de/@bombsquad85_502998">bombsquad85</a> but i want to use a 120mm Fan. So i created a remix for a single 120mm fan ;-)</p><p> </p><p>I print it in PETG but better materials like ASA/ABS will maybe work better.</p><p> </p><p><strong>For Speed Adjustme... | [
"cover",
"fan",
"fanmount",
"sv08"
] | 3D Printers > Other Printer Parts & Upgrades | [
"928574/images/image_1_compressed.jpg",
"928574/images/image_2_compressed.jpg",
"928574/images/image_3_compressed.jpg",
"928574/images/image_4_compressed.jpg",
"928574/images/image_5_compressed.jpg"
] | [
"928574/stls/PSU 120mm Fan cover.stl"
] | CC-BY | https://www.printables.com/model/928574 | data_0033.tar |
1073040 | Sovol SV08 Taco Bed Fix | <p>My procedure to fix the taco bed on the Sovol SV08...</p><p><strong>Step 1</strong></p><p>Heatsoak your bed to your normal print temp, preform a QGL 2 or 3 times (this will reduce the deviation between the 4 corners), do full bed mesh height map, and save a copy of this bed mesh height map.</p><p><img class="image_r... | [
"bed",
"mesh",
"taco",
"sovol",
"bedmesh",
"sv08",
"tacobed"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1073040/images/image_1_compressed.jpg",
"1073040/images/image_2_compressed.jpg",
"1073040/images/image_3_compressed.jpg",
"1073040/images/image_4_compressed.jpg",
"1073040/images/image_5_compressed.jpg",
"1073040/images/image_6_compressed.jpg",
"1073040/images/image_7_compressed.jpg"
] | [
"1073040/stls/hotbed post spacer.stl",
"1073040/stls/hotbed shim pack.stl"
] | CC-BY | https://www.printables.com/model/1073040 | data_0033.tar |
1458950 | Sovol SV08 Toolhead Baseplate for Orbiter V2x | <p>I am just in awww of the response and help that I have received on this project. I am very appreciative of all the help and feedback. Hopefully we can make this modular with a tailor made duct system to fit other extruder options soon. </p><p>Upon request I modified the SV08 toolhead baseplate to use the orbit... | [
"extruder",
"hotend",
"baseplate",
"sovol",
"ldo",
"toolhead",
"orbiterv2",
"sv08",
"sovolsv08"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1458950/images/image_1_compressed.jpg",
"1458950/images/image_2_compressed.jpg",
"1458950/images/image_3_compressed.jpg",
"1458950/images/image_4_compressed.jpg",
"1458950/images/image_5_compressed.jpg",
"1458950/images/image_6_compressed.jpg"
] | [
"1458950/stls/fan retainer.stl",
"1458950/stls/Kampfwuffi SV08-atomic-shroud-led-ORBITER2x.stl",
"1458950/stls/Modified tool head cover.stl",
"1458950/stls/sv08 toolhead baseplate Orbiter v2x v6.stl",
"1458950/stls/sv08 toolhead baseplate Orbiter v2x v8.stl",
"1458950/stls/sv08-toolhead-baseplate-orbiter-... | GPL3.0 | https://www.printables.com/model/1458950 | data_0033.tar |
1505009 | Sovol SV08 toolhead cover EDDY PROBE + 3010 fan for TH MCU | <p>The toolhead cover works with BTT EDDY DUO and has a better clearence for the cable so you won t compromise it as i did because now the cable is not touching anything. I also added some holes on top of the cover for better toolhead mcu cooling. It is also compatible with Neopixel led for nozzle, it s basicly t... | [
"upgrade",
"mod",
"sovol",
"sv08"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1505009/images/image_1_compressed.jpg",
"1505009/images/image_2_compressed.jpg",
"1505009/images/image_3_compressed.jpg",
"1505009/images/image_4_compressed.jpg",
"1505009/images/image_5_compressed.jpg",
"1505009/images/image_6_compressed.jpg"
] | [
"1505009/stls/08 toolhead .stl",
"1505009/stls/fan bracket .stl"
] | GPL3.0 | https://www.printables.com/model/1505009 | data_0033.tar |
865851 | Sovol SV08 Top Hat | <p>WARNING: Calibrate shrinkage before you print. These are long pieces and errors will show.</p><div data-youtube-video=""><iframe class="editor-youtube" width="640" height="480" allowfullscreen="true" autoplay="false" disablekbcontrols="false" enableiframeapi="false" endtime="0" ivloadpolicy="0" loop="false" modestbr... | [
"hat",
"cover",
"top",
"topcover",
"tophat",
"voron",
"sovol",
"sv08",
"sovolsv08"
] | 3D Printers > Other Printer Parts & Upgrades | [
"865851/images/image_1_compressed.jpg",
"865851/images/image_10_compressed.jpg",
"865851/images/image_11_compressed.jpg",
"865851/images/image_2_compressed.jpg",
"865851/images/image_3_compressed.jpg",
"865851/images/image_4_compressed.jpg",
"865851/images/image_5_compressed.jpg",
"865851/images/image... | [
"865851/stls/back left with cut out for the filter.stl",
"865851/stls/back left with cutout for the exhaust filter.stl",
"865851/stls/back left without filter.stl",
"865851/stls/back left without filter.stl",
"865851/stls/back right corner.stl",
"865851/stls/back right with cut out for the filter.stl",
... | GPL3.0 | https://www.printables.com/model/865851 | data_0033.tar |
943985 | Sovol SV08 TOP HAT Side Exhaust | <p>WARNING: Calibrate shrinkage before you print. These are long pieces and errors will show.<br></p><div data-youtube-video=""><iframe class="editor-youtube" width="640" height="480" allowfullscreen="true" autoplay="false" disablekbcontrols="false" enableiframeapi="false" endtime="0" ivloadpolicy="0" loop="false" mode... | [
"filter",
"enclosure",
"panel",
"exhaust",
"voron",
"sovol",
"sv08"
] | 3D Printers > Other Printer Parts & Upgrades | [
"943985/images/image_1_compressed.jpg",
"943985/images/image_2_compressed.jpg",
"943985/images/image_3_compressed.jpg",
"943985/images/image_4_compressed.jpg",
"943985/images/image_5_compressed.jpg"
] | [
"943985/stls/all corners toghether.stl",
"943985/stls/back left panel.stl",
"943985/stls/back right corner.stl",
"943985/stls/back right panel.stl",
"943985/stls/front left panel.stl",
"943985/stls/front right panel.stl",
"943985/stls/left back panel.stl",
"943985/stls/left front corner.stl",
"94398... | GPL3.0 | https://www.printables.com/model/943985 | data_0033.tar |
945045 | Sovol SV08 TOP HAT with BTT 5" Display | <p>WARNING: Calibrate shrinkage before you print. These are long pieces and errors will show.<br></p><div data-youtube-video=""><iframe class="editor-youtube" width="640" height="480" allowfullscreen="true" autoplay="false" disablekbcontrols="false" enableiframeapi="false" endtime="0" ivloadpolicy="0" loop="false" mode... | [
"display",
"5inch",
"voron",
"sovol",
"btt",
"5inchdisplay",
"cn3d",
"sv08",
"nadir",
"bttdisplay"
] | 3D Printers > Other Printer Parts & Upgrades | [
"945045/images/image_1_compressed.jpg",
"945045/images/image_2_compressed.jpg",
"945045/images/image_3_compressed.jpg",
"945045/images/image_4_compressed.jpg",
"945045/images/image_5_compressed.jpg",
"945045/images/image_6_compressed.jpg"
] | [
"945045/stls/back left panel - cutout for exhaust filter.stl",
"945045/stls/back left panel.stl",
"945045/stls/back right corner.stl",
"945045/stls/back right panel - cutout for exhaust filter.stl",
"945045/stls/back right panel.stl",
"945045/stls/btt 5in display back plate.stl",
"945045/stls/btt 5in di... | GPL3.0 | https://www.printables.com/model/945045 | data_0033.tar |
1257347 | Sovol SV08 Z-belt cover | <p>Sovol SV08 Z-belt cover, so nothing can fall into the pully. </p><p>You need to press it to the linear rail. It will snap in. Then glue it to the base with a small dot of super glue.</p> | [
"belt",
"protection"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1257347/images/image_1_compressed.jpg",
"1257347/images/image_2_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/1257347 | data_0033.tar |
1266280 | Sovol Zero Exterior Frame Accent Pieces by Sovol - Organized for printing | <p>When I first took my Sovol Zero out of the box, I wanted to modify the accent pieces to something custom, and their provided STEP files made it much easier to accomplish just that. These are <a href="https://github.com/Sovol3d/SOVOL-ZERO/tree/main/STEP">directly sourced from the Sovol Zero STEP files</a> and all att... | [
"sovol",
"sovolzero"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1266280/images/image_1_compressed.jpg",
"1266280/images/image_2_compressed.jpg",
"1266280/images/image_3_compressed.jpg"
] | [
"1266280/stls/Sovol Zero Exterior Components as one printable piece.stl",
"1266280/stls/Sovol Zero Frame Lock and Handles.stl",
"1266280/stls/Sovol Zero Frame Parts.stl"
] | CC0 | https://www.printables.com/model/1266280 | data_0033.tar |
1252771 | Sovol Zero side spool holder and filament sensor mount | <p>I designed this for the Sovol Zero. It provides easy access to the spool and also saves space at the back. The magnet(optional) I used is 60×10×3 mm: https://amzn.to/4jWMPNb</p><p>Please watch my review video:<br> </p><figure class="media"><oembed url="https://youtu.be/EfOWsVd_1VY"></oembed></figure><p><br><br>... | [
"spool",
"holder",
"filament",
"side",
"zero",
"sovol"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1252771/images/image_1_compressed.jpg",
"1252771/images/image_2_compressed.jpg"
] | [
"1252771/stls/Sovol SV0 Zero Side Filament sensor.stl",
"1252771/stls/Sovol SV0 Zero Side Spool Holder .stl"
] | CC0 | https://www.printables.com/model/1252771 | data_0033.tar |
1260605 | Sovol Zero Sidemount Spoolholder | <p>This Sidemount uses the original sovol Spoolholder to relocate the spool to the front right side of the printer. There is also a version for M3 heatinserts. It fits on the Zero's 152x152 buildplate if rotated 45°.</p><p>To mount, remove the original spoolholder, remove the filament sensor. Remove the lower 2 screws ... | [
"spoolholder",
"zero",
"sovol"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1260605/images/image_1_compressed.jpg",
"1260605/images/image_2_compressed.jpg",
"1260605/images/image_3_compressed.jpg",
"1260605/images/image_4_compressed.jpg",
"1260605/images/image_5_compressed.jpg"
] | [
"1260605/stls/Filament Sensor Relocator.stl",
"1260605/stls/Sidemount Spoolholder Sovol Zero Inserts.stl",
"1260605/stls/Sidemount Spoolholder Sovol Zero.stl"
] | CC0 | https://www.printables.com/model/1260605 | data_0033.tar |
1406153 | Sovol Zero / SV08 Max Toolhead Shroud (Cover with Toolboard Fan Mount) | <p>This is a <strong>direct replacement</strong> for the stock front cover of the <strong>Sovol Zero</strong> and <strong>Sovol SV08 Max</strong> toolheads.<br>Besides improving part cooling performance, it also adds support for a <strong>dedicated toolboard fan</strong> (2510 size).<br><br>We tested the <strong>part c... | [
"cover",
"fan",
"zero",
"shroud",
"2510",
"sovol",
"toolhead",
"toolboard",
"cn3d",
"sovolsv08",
"sovolzero",
"sovolsv08max",
"tollheadcover"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1406153/images/image_1_compressed.jpg",
"1406153/images/image_10_compressed.jpg",
"1406153/images/image_11_compressed.jpg",
"1406153/images/image_12_compressed.jpg",
"1406153/images/image_13_compressed.jpg",
"1406153/images/image_14_compressed.jpg",
"1406153/images/image_15_compressed.jpg",
"1406153/... | [
"1406153/stls/part cooling fan cap.stl",
"1406153/stls/SV08 Max -SV Zero Shroud.stl",
"1406153/stls/SV08 Max -SV Zero Shrowd.stl",
"1406153/stls/toolboard fan cap.stl",
"1406153/stls/toolboard fan L clip.stl",
"1406153/stls/toolboard fan R clip.stl"
] | GPL3.0 | https://www.printables.com/model/1406153 | data_0033.tar |
609811 | Soy fish lamp reworked | <p><strong>Customizing the model:</strong></p><p>If you want to customize the model, i have provided two user-parameters in the fusion-360 file: Socket clip diameter and socket y offset to change how far into the lamp your light goes (see photo). If you want to customize those parameters in Fusion 360 go to modify>c... | [
"light",
"lamp",
"lighting",
"lampshade"
] | Household > Home Decor | [
"609811/images/image_1_compressed.jpg",
"609811/images/image_2_compressed.jpg",
"609811/images/image_3_compressed.jpg"
] | [
"609811/stls/cap.stl",
"609811/stls/clip.stl",
"609811/stls/fish_vase_mode.stl",
"609811/stls/screw.stl",
"609811/stls/wedge.stl"
] | CC-BY | https://www.printables.com/model/609811 | data_0033.tar |
298178 | spa francorchamps | <p>spa francochamps race track.</p> | [
"spa",
"racetrack",
"spafrancorchamps"
] | Art & Design > Other Art & Designs | [
"298178/images/image_1_compressed.jpg"
] | [
"298178/stls/spa.stl"
] | CC0 | https://www.printables.com/model/298178 | data_0033.tar |
306683 | Space Crate (Stackable) | <p>Goes great with <a href="https://www.printables.com/model/317546-cratetransporter">BuildersMark's Crate Transport Truck</a>!</p><p>Originally designed for the 2022 LM Show Christmas Community Print Drive! SPACE is our theme this year! Print and help us ship 3D printed toys to children and families in-need, all over ... | [
"toy",
"box",
"print",
"case",
"pelican",
"space",
"toys",
"crate",
"kids",
"storage",
"drive",
"safe",
"lm",
"lmshow",
"thelmshow"
] | Toys & Games > Other Toys & Games | [
"306683/images/image_1_compressed.jpg",
"306683/images/image_2_compressed.jpg",
"306683/images/image_3_compressed.jpg"
] | [
"306683/stls/space_crate_2.stl"
] | CC-BY | https://www.printables.com/model/306683 | data_0033.tar |
1101988 | Space Efficient Socket Holders - Gridfinity | <p>There are many great models online for gridfinity socket organizers, but my toolbox is small, so I needed them to be as space-efficient as possible. This is my take on space-efficient socket organizers. I had to make some compromises on the text for the ¼" drive holders, but I think they turned out alright, all thin... | [
"toolholder",
"toolstorage",
"sockets",
"toolorganizer",
"toolsorganizer",
"socketorganizer",
"socketsholder",
"toolboxorganizer",
"gridfinity",
"toolboxdrawerorganizer",
"gridfinityholder",
"socketstorage"
] | Hobby & Makers > Organizers | [
"1101988/images/image_1_compressed.jpg",
"1101988/images/image_10_compressed.jpg",
"1101988/images/image_11_compressed.jpg",
"1101988/images/image_12_compressed.jpg",
"1101988/images/image_13_compressed.jpg",
"1101988/images/image_14_compressed.jpg",
"1101988/images/image_15_compressed.jpg",
"1101988/... | [
"1101988/stls/Dovetail Test Print.stl",
"1101988/stls/Half Inch Imperial Label.stl",
"1101988/stls/Half Inch Imperial Socket Holder.stl",
"1101988/stls/Half Inch Imperial Test Print.stl",
"1101988/stls/Half Inch Metric Holes Test Print.stl",
"1101988/stls/Half Inch Metric Label.stl",
"1101988/stls/Half ... | CC-BY | https://www.printables.com/model/1101988 | data_0033.tar |
391349 | Space Invaders Earrings | Space Invaders Earrings, easy to print, easy gift | Download free 3D printable STL models | [
"earrings",
"earring",
"space",
"game",
"gaming",
"gift",
"old",
"easy",
"valentine",
"valentinesday",
"spaceinvaders",
"oldschool",
"invaders"
] | Gadgets > Video Games | [
"391349/images/image_1_compressed.jpg"
] | [
"391349/stls/Space_Invader_Earrings_repaired2Z.stl"
] | CC0 | https://www.printables.com/model/391349 | data_0033.tar |
306674 | Space Radio | <p>Originally designed for the 2022 LM Show Christmas Community Print Drive! SPACE is our theme this year! Print and help us ship 3D printed toys to children and families in-need, all over the world! </p><p><a href="https://print.thelmshow.com/pages/2022-christmas-community-print-drive-guidelines">https://print.th... | [
"toy",
"print",
"space",
"kids",
"drive",
"radio",
"safe",
"lm",
"lmshow",
"thelmshow"
] | Toys & Games > Other Toys & Games | [
"306674/images/image_1_compressed.jpg",
"306674/images/image_2_compressed.jpg"
] | [
"306674/stls/space_radio.stl"
] | CC-BY | https://www.printables.com/model/306674 | data_0033.tar |
628010 | Space Shuttle Endeavour | <p>This is my model of the Space shuttle Endeavour OV-105. The model is a kit and does not require any glue. It is roughly 50cm long and has several features. The cargo bay doors can be open. It has posable arm and the satellite could have the solar panels extended. It also comes with stand. The different colored parts... | [
"space",
"mechanical",
"endeavour",
"shuttle",
"raketoplan"
] | Toys & Games > Vehicles | [
"628010/images/image_1_compressed.jpg",
"628010/images/image_10_compressed.jpg",
"628010/images/image_11_compressed.jpg",
"628010/images/image_2_compressed.jpg",
"628010/images/image_3_compressed.jpg",
"628010/images/image_4_compressed.jpg",
"628010/images/image_5_compressed.jpg",
"628010/images/image... | [
"628010/stls/xxx_-_arm1_w.stl",
"628010/stls/xxx_-_arm2_w.stl",
"628010/stls/xxx_-_arm_base_w.stl",
"628010/stls/xxx_-_bay_pin_4x.stl",
"628010/stls/xxx_-_connector_10x10x10.stl",
"628010/stls/xxx_-_hatch_1_w.stl",
"628010/stls/xxx_-_pin_4x12_2x.stl",
"628010/stls/xxx_-_sat2_g.stl",
"628010/stls/xxx... | CC-BY | https://www.printables.com/model/628010 | data_0033.tar |
106857 | Space Shuttle Kit Card Ornanment |
<p>Space Shuttle kit card ornament I made to give to my friends</p>
<h3> Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>I3 MK3S</p></div><strong>Rafts:</strong></p>
<p>No</p>
<p><p class="detail-setting supports"><strong>S... | [
"thingiverse"
] | Household > Other House Equipment | [
"106857/images/image_1_compressed.jpg",
"106857/images/image_2_compressed.jpg",
"106857/images/image_3_compressed.jpg"
] | [
"106857/stls/Shuttle_Card_v7.stl"
] | CC-BY | https://www.printables.com/model/106857 | data_0033.tar |
108963 | Space Shuttle Toggle Switch Guard | <p>This is an accurate recreation of a toggle switch guard used on the many control panels in the space shuttle. </p><p>Included is a PDF are the part dimensions in case the standard thread dimensions of the switch are different from what you choose to you use for your project, and want to remodel it. I have also ... | [
"spacex",
"space",
"rocket",
"switch",
"engineering",
"controller",
"spaceship",
"scifi",
"nasa",
"resin",
"resinprinter",
"toggleswitch",
"toggle",
"controlpanel",
"shuttle",
"spaceshuttle"
] | Hobby & Makers > Mechanical Parts | [
"108963/images/image_1_compressed.jpg",
"108963/images/image_2_compressed.jpg",
"108963/images/image_3_compressed.jpg"
] | [
"108963/stls/Space Shuttle Switch Guard.stl",
"108963/stls/Space Shuttle Switch Head with Hole.stl",
"108963/stls/Space Shuttle Switch Head.stl"
] | CC0 | https://www.printables.com/model/108963 | data_0033.tar |
306675 | Space Walkie Talkie | <p>Originally designed for the 2022 LM Show Christmas Community Print Drive! SPACE is our theme this year! Print and help us ship 3D printed toys to children and families in-need, all over the world! </p><p><a href="https://print.thelmshow.com/pages/2022-christmas-community-print-drive-guidelines">https://print.th... | [
"toy",
"print",
"space",
"toys",
"kids",
"drive",
"radio",
"safe",
"lm",
"lmshow",
"walkie",
"talkie",
"thelmshow"
] | Toys & Games > Other Toys & Games | [
"306675/images/image_1_compressed.jpg",
"306675/images/image_2_compressed.jpg"
] | [
"306675/stls/space_walkie.stl"
] | CC-BY | https://www.printables.com/model/306675 | data_0033.tar |
234779 | Spaceballs the Coaster | <p>Can you believe Spaceballs is 35 years old?!? And it's still all about merchandising! So here's Spaceballs the Coaster!</p><p>Happy Printing!</p> | [
"starwars",
"spaceballs",
"coaster",
"drinkcoaster",
"darkhelmet"
] | Art & Design > 2D Plates & Logos | [
"234779/images/image_1_compressed.jpg"
] | [
"234779/stls/SpaceballsTheCoaster.stl"
] | CC-BY | https://www.printables.com/model/234779 | data_0033.tar |
82291 | Spacenavigator |
<p>I made a Remix of the handrest as it didn't fit my newer model spacemouse.<br/>
while I was at it i added the slot for the Charger cable and a slot to put the usb dongle while its no in use.</p>
<p>I like the shape of the original design, so I haven't changed any of that.</p>
<h3> Print Settings</h3>
<p><strong>Pr... | [
"3dconnexion",
"thingiverse",
"spacemouse",
"handrest"
] | Household > Office | [
"82291/images/image_1_compressed.jpg",
"82291/images/image_2_compressed.jpg"
] | [
"82291/stls/Spacenavigator.stl",
"82291/stls/SpaceNavigator_Lid.stl"
] | CC-BY | https://www.printables.com/model/82291 | data_0033.tar |
468564 | Spacer for shoe rack filament storage | <p>This is a spacer for certain metal pipe shoe racks found on Amazon. Without the spacers, many rolls of filament would need to be gently pushed through the bars.</p><p>Here are links for some of the racks:</p><p><a href="https://www.amazon.com/dp/B09W7DSW8H">https://www.amazon.com/dp/B09W7DSW8H</a></p><p><a href="htt... | [
"filamentstorage",
"filamentrack"
] | 3D Printers > Accessories | [
"468564/images/image_1_compressed.jpg",
"468564/images/image_2_compressed.jpg",
"468564/images/image_3_compressed.jpg",
"468564/images/image_4_compressed.jpg",
"468564/images/image_5_compressed.jpg"
] | [
"468564/stls/filament_shoerack_spacer.stl",
"468564/stls/filament_shoerack_spacer_8-pack.stl"
] | CC0 | https://www.printables.com/model/468564 | data_0033.tar |
415787 | Spacer for SUNLU Filadryer S2 | <p>I've found that the S2 filament dryer from SUNLU functions better if left open a small amount, giving the humidity a chance to escape. Without it the humidity sensor for me would report values between 25-30%, with it I typically see 15-20%. </p> | [
"sunlu"
] | 3D Printers > Accessories | [
"415787/images/image_1_compressed.jpg",
"415787/images/image_2_compressed.jpg"
] | [
"415787/stls/spacer.stl"
] | CC0 | https://www.printables.com/model/415787 | data_0033.tar |
1104894 | Spaceship with the Tower | <p>This is my model of the entire Launch Tower with the Superheavy Starship from SpaceX. The entire build is roughly in 1/144 scale and has several functions.<br><br>Both arms are movable and can slide on the tower as needed. They also come with a safety pins to hold the Starship securely in place. <br>The Hotstag... | [
"ship",
"heavy",
"space",
"star",
"super",
"tower",
"booster",
"x",
"mechazilla"
] | Learning > Physics & Astronomy | [
"1104894/images/image_1_compressed.jpg",
"1104894/images/image_10_compressed.jpg",
"1104894/images/image_2_compressed.jpg",
"1104894/images/image_3_compressed.jpg",
"1104894/images/image_4_compressed.jpg",
"1104894/images/image_5_compressed.jpg",
"1104894/images/image_6_compressed.jpg",
"1104894/image... | [
"1104894/stls/xxx_x_arm.stl",
"1104894/stls/xxx_x_arm2.stl",
"1104894/stls/xxx_x_arm_base.stl",
"1104894/stls/xxx_x_arm_base2.stl",
"1104894/stls/xxx_x_arm_base3.stl",
"1104894/stls/xxx_x_arm_pin1.stl",
"1104894/stls/xxx_x_arm_pin2_3x.stl",
"1104894/stls/xxx_x_arm_pin3.stl",
"1104894/stls/xxx_x_arm_... | CC-BY | https://www.printables.com/model/1104894 | data_0033.tar |
312519 | SpaceX Crew Dragon | <p>SpaceX Crew Dragon Spacecraft I designed in Fusion360. I added Disks to the fins to help with First layer adhesion. </p><p>Print Settings:</p><ul><li>0.2mm layer Height</li><li>3 perimeters</li><li>15% Infill</li><li>4 top and bottom layers</li></ul> | [
"toy",
"spacex",
"space",
"rocket",
"toys",
"spaceship"
] | Toys & Games > Vehicles | [
"312519/images/image_1_compressed.jpg",
"312519/images/image_2_compressed.jpg",
"312519/images/image_3_compressed.jpg"
] | [
"312519/stls/Crew Dragon.stl",
"312519/stls/Crew_Dragon_wt_helpers.stl"
] | CC-BY | https://www.printables.com/model/312519 | data_0033.tar |
22119 | SpaceX Pen Holder | <p>A warm reminder of all the amazing things SpaceX is doing right now every time you reach for your pen or pencil.</p>
<p>The SpaceX logo's X is its most recognizable feature. It conjures images of exhaust trails high up in the atmosphere from a rocket destined for space. This celestial organizer is a single piece pri... | [
"thingiverse"
] | Household > Office | [
"22119/images/image_1_compressed.jpg",
"22119/images/image_10_compressed.jpg",
"22119/images/image_11_compressed.jpg",
"22119/images/image_12_compressed.jpg",
"22119/images/image_2_compressed.jpg",
"22119/images/image_3_compressed.jpg",
"22119/images/image_4_compressed.jpg",
"22119/images/image_5_comp... | [
"22119/stls/spacex_pencil_holder-blue-part_005.stl",
"22119/stls/spacex_pencil_holder-silver-part_005.stl"
] | CC-BY | https://www.printables.com/model/22119 | data_0033.tar |
314575 | Spackle Spreader | <p>Applicator for applying and smoothing spackle to fill drywall holes and cracks. I tried several hardness vs flexibility for the blade and 0.5 won out. No supports or brim needed. Printed on my Prusa MK3S+ in about an hour and a half so I i damage it, easy and cheap to replace!</p> | [
"applicator",
"spreader",
"drywall",
"wallboard"
] | Hobby & Makers > Tools | [
"314575/images/image_1_compressed.jpg"
] | [
"314575/stls/Spackle Spreader 0.5.stl"
] | CC-BY | https://www.printables.com/model/314575 | data_0033.tar |
743322 | Spaghetti gun | <figure class="image"><img src="https://media.printables.com/media/prints/743322/rich_content/9f4c9a23-645b-4028-b245-4fc70b426fd0/20240129_122443.gif#%7B%22uuid%22%3A%22b433e5c6-3b15-40d7-bbab-929e8eb24bb4%22%2C%22w%22%3A854%2C%22h%22%3A480%7D"></figure><p> </p><p><strong>Why, just why? </strong>:<br><br>Here's t... | [
"kitchen",
"toy",
"funny",
"fun",
"gun",
"italian",
"spaghetti",
"noodle",
"guns",
"italy",
"thrower",
"flinger",
"spaghettigun"
] | Toys & Games > Other Toys & Games | [
"743322/images/image_1_compressed.jpg",
"743322/images/image_2_compressed.jpg"
] | [
"743322/stls/SpaghetGunV1.stl"
] | CC-BY | https://www.printables.com/model/743322 | data_0033.tar |
331023 | spaghetti measurer (Doseur à spaghettis) | <p>Pour Mesurer La Quantité De Spaghetti Avec 4 trous de mesure(mesure jusqu'à quatre portions pour adulte). Réduisez le gaspillage alimentaire.</p> | [
"spaghetti"
] | Household > Kitchen | [
"331023/images/image_1_compressed.jpg",
"331023/images/image_2_compressed.jpg"
] | [
"331023/stls/spageti mersure v2.stl"
] | CC-BY | https://www.printables.com/model/331023 | data_0033.tar |
324614 | Spaghetti measuring tool | Easy to print spaghetti measuring tool | Download free 3D printable STL models | [
"pasta",
"spaghetti",
"measuring",
"spaghettimeasure",
"coocking"
] | Household > Kitchen | [
"324614/images/image_1_compressed.jpg"
] | [
"324614/stls/Spaghetti measuring tool.stl"
] | CC-BY | https://www.printables.com/model/324614 | data_0033.tar |
89329 | Spaghetti Pasta Gauge | <p>Serving size is denoted by number of notches.</p> | [
"kitchen",
"pasta",
"gauge",
"kitchentool",
"kitchengadget"
] | Household > Kitchen | [
"89329/images/image_1_compressed.jpg",
"89329/images/image_2_compressed.jpg",
"89329/images/image_3_compressed.jpg"
] | [
"89329/stls/Spaghetti Portion Gauge.stl"
] | CC0 | https://www.printables.com/model/89329 | data_0033.tar |
332696 | Spaghetti portion measuring tool | A spaghetti portion measurer that has up to four portions. | Download free 3D printable STL models | [] | Household > Kitchen | [
"332696/images/image_1_compressed.jpg"
] | [
"332696/stls/PMG_180327.stl"
] | CC0 | https://www.printables.com/model/332696 | data_0033.tar |
843828 | SPAMTON G. SPAMTON | HEY EVERY !! IT ＇ S ME!!! EV3RY BUDDY ＇ S FAVORITE [[Number 1 Rated Salesman 1997]] Spamton G. Spamton!! | Download free 3D printable STL models | [
"neo",
"undertale",
"1997",
"sale",
"hyperlink",
"deltarune",
"salesman",
"spam",
"spamton",
"spamtong"
] | Toys & Games > Action Figures & Statues | [
"843828/images/image_1_compressed.jpg",
"843828/images/image_10_compressed.jpg",
"843828/images/image_11_compressed.jpg",
"843828/images/image_12_compressed.jpg",
"843828/images/image_13_compressed.jpg",
"843828/images/image_2_compressed.jpg",
"843828/images/image_3_compressed.jpg",
"843828/images/ima... | [
"843828/stls/Chair.stl",
"843828/stls/Phone.stl",
"843828/stls/SpamtonBody.stl",
"843828/stls/SpamtonHandL.stl",
"843828/stls/SpamtonHandR.stl",
"843828/stls/SpamtonHands.stl",
"843828/stls/SpamtonHead.stl",
"843828/stls/SpamtonStand.stl"
] | CC-BY | https://www.printables.com/model/843828 | data_0033.tar |
219630 | Spanner - Wrench set 8x | <p>Set of wrenches/spanners with the sizes:</p><p>6 - 7</p><p>8 - 9</p><p>10 - 11</p><p>12 - 13</p><p>14 - 15</p><p>16 - 17</p><p>18 - 19</p><p>20 - 21</p><p>Print settings:</p><ul><li>Layer: 0.25mm Draft or 0.28mm Superdraft</li><li>Infill: 25%</li><li>Nozzle: 0.4mm</li><li>Filament: Esun PLA+ (PETG should work as wel... | [
"tool",
"wrench",
"set",
"spanner"
] | Hobby & Makers > Tools | [
"219630/images/image_1_compressed.jpg",
"219630/images/image_2_compressed.jpg"
] | [
"219630/stls/Wrenches_set.stl",
"219630/stls/Wrench_10_11.stl",
"219630/stls/Wrench_12_13.stl",
"219630/stls/Wrench_14_15.stl",
"219630/stls/Wrench_16_17.stl",
"219630/stls/Wrench_18_19.stl",
"219630/stls/Wrench_20_21.stl",
"219630/stls/Wrench_20_21_empty.stl",
"219630/stls/Wrench_6_7.stl",
"21963... | CC-BY | https://www.printables.com/model/219630 | data_0033.tar |
95700 | Spanner / Wrench pegboard holder & wall mounted version (New expansion bracket added for imperial SAE sets) |
<p>This is a pegboard mounted spanner/wrench mount. It's made to fit one of these (<a href="https://www.amazon.co.uk/gp/product/B003BV77T2/?tag=thingiverse09-20">https://www.amazon.co.uk/gp/product/B003BV77T2/</a> You may need to copy-paste the link) sets or it's equivalents.</p>
<p>There's both a pegboard mounted v... | [
"wrench",
"pegboard",
"pegboardmount",
"spanner",
"thingiverse"
] | Hobby & Makers > Tools | [
"95700/images/image_1_compressed.jpg",
"95700/images/image_10_compressed.jpg",
"95700/images/image_11_compressed.jpg",
"95700/images/image_12_compressed.jpg",
"95700/images/image_2_compressed.jpg",
"95700/images/image_3_compressed.jpg",
"95700/images/image_4_compressed.jpg",
"95700/images/image_5_comp... | [
"95700/stls/pegboard_-_Spanner_Holder.stl",
"95700/stls/pegboard_-_Spanner_Holder_mounting_brackets.stl",
"95700/stls/SAE_-_Expansion_Mount.stl",
"95700/stls/SAE_-_Left_Bracket.stl",
"95700/stls/SAE_-_Right_Bracket.stl",
"95700/stls/wallmounted_-_center_bracket.stl",
"95700/stls/wallmounted_-_left_brack... | CC-BY | https://www.printables.com/model/95700 | data_0033.tar |
51443 | Spare Nozzle Case V2 | <p><strong><em> UPDATED VERSION</em></strong></p>
<p>I designed this case to hold my spare nozzles for my Prusa i3. The case is printed in one piece with functional hinge and clip to keep the case closed when not in use. Never mislay those nozzles again. This one has text 'Nozzles 0.4mm' let me know if you would prefer... | [
"prusai3",
"3dprinting",
"nozzle",
"fusion360",
"3dprinter",
"nozzleholder",
"e3dv6",
"wanhaoduplicatori3",
"thingiverse",
"autodeskfusion360",
"ultimaker"
] | Hobby & Makers > Organizers | [
"51443/images/image_1_compressed.jpg",
"51443/images/image_2_compressed.jpg",
"51443/images/image_3_compressed.jpg",
"51443/images/image_4_compressed.jpg",
"51443/images/image_5_compressed.jpg",
"51443/images/image_6_compressed.jpg",
"51443/images/image_7_compressed.jpg",
"51443/images/image_8_compres... | [
"51443/stls/nozzle_case_04text.stl",
"51443/stls/nozzle_case_blank_top.stl",
"51443/stls/nozzle_case_nozzles_text.stl"
] | CC-BY | https://www.printables.com/model/51443 | data_0033.tar |
197954 | Spare support leg for Rummikub tile board | <p>I made and printed this model for an acquaintance because their original set of was missing one leg and over years of usage, the crossed slots in the boards have been worn out a little causing the legs to fall out at the slightest nudge. </p><p>Printing tips (PLA as that is the only material I tried):&nbs... | [
"leg",
"support",
"spare",
"boardgame",
"rummikub"
] | Toys & Games > Board Games | [
"197954/images/image_1_compressed.jpg"
] | [
"197954/stls/Rummikub_legV1.stl"
] | CC0 | https://www.printables.com/model/197954 | data_0033.tar |
177108 | Sparkle Wherever You Go Award | <p>A coworker of mine always complains about never getting a company award we decided he finally earned one... just not the one he wanted.</p><p>By request on the always entertaining <a href="https://www.facebook.com/groups/444164956225496/">F**k that I'll just print it!</a> Facebook group I've included an alternative ... | [
"award",
"unicorn",
"thingiverse",
"fuckyou",
"sparkle"
] | Art & Design > Sculptures | [
"177108/images/image_1_compressed.jpg",
"177108/images/image_2_compressed.jpg",
"177108/images/image_3_compressed.jpg",
"177108/images/image_4_compressed.jpg"
] | [
"177108/stls/Blank Plaque.stl",
"177108/stls/Hex3D_Hairy_Unicorn_SingleExtrusion.stl",
"177108/stls/ParticipationTrophy.stl",
"177108/stls/SparkleWhereverYouGoAward.stl"
] | CC-BY | https://www.printables.com/model/177108 | data_0033.tar |
89313 | Sparkling wine stopper | <p>A simple wine stopper that you can use either for still wine or sparkling wine</p> | [] | Household > Kitchen | [
"89313/images/image_1_compressed.jpg",
"89313/images/image_2_compressed.jpg",
"89313/images/image_3_compressed.jpg"
] | [
"89313/stls/Sparkling_wine_stopper.stl"
] | GPL2.0 | https://www.printables.com/model/89313 | data_0033.tar |
164603 | Sparschwein mit Deckel | Das Original war komisch gemacht die Öffnung war zu und musste nachträglich geöffnet werden um den Deckel zu verwenden. | Download free 3D printable STL models | [
"euro",
"spardose",
"sparschwein",
"geld"
] | Gadgets > Other Gadgets | [
"164603/images/image_1_compressed.jpg",
"164603/images/image_2_compressed.jpg",
"164603/images/image_3_compressed.jpg",
"164603/images/image_4_compressed.jpg"
] | [
"164603/stls/Sparschwein_Deckel_v1.2.stl",
"164603/stls/Sparschwein_v5.stl"
] | CC0 | https://www.printables.com/model/164603 | data_0033.tar |
745412 | SPARTACUS The Toolhead | <p>I've always wanted to measure how good my cooling ducts actually are—not just guess. So I got myself an anemometer and ran some real tests on my Spartacus toolhead!</p><p>In this short video, I show the results from different fan + duct setups and how the airflow improved with some simple changes.</p><p>Toolhead: Sp... | [
"tool",
"head",
"hotend",
"trident",
"voron",
"blvmgncube",
"blvmod",
"blv",
"blvmgn",
"sovol",
"toolhead",
"stealthburner",
"spartacus",
"ministealthburner"
] | 3D Printers > Voron Parts & Upgrades | [
"745412/images/image_1_compressed.jpg",
"745412/images/image_10_compressed.jpg",
"745412/images/image_11_compressed.jpg",
"745412/images/image_12_compressed.jpg",
"745412/images/image_13_compressed.jpg",
"745412/images/image_14_compressed.jpg",
"745412/images/image_15_compressed.jpg",
"745412/images/i... | [
"745412/stls/45 degrees strain rellief cover.stl",
"745412/stls/45 degrees strain rellief.stl",
"745412/stls/6mm belt helper.stl",
"745412/stls/90 degrees strain rellief cover.stl",
"745412/stls/90 degrees strain rellief.stl",
"745412/stls/belt helper support.stl",
"745412/stls/belt holder.stl",
"7454... | GPL3.0 | https://www.printables.com/model/745412 | data_0033.tar |
642899 | Spartan USB&Micro SD Holder-REUPLOAD | <p>this isn't mine and this is my first reupload so if I have broken rules or etiquette please let me know :) I just wanted to reshare to get the hang of it and honor this great print that I'm yet to print in marble sadly. everything is the exact same and credit goes to @<a href="https://www.thingiverse.com/dsp3d">dsp3... | [
"organizer",
"holder",
"sd",
"desk",
"usb",
"work",
"spartan"
] | Gadgets > Other Gadgets | [
"642899/images/image_1_compressed.jpg",
"642899/images/image_2_compressed.jpg"
] | [
"642899/stls/Spartan-5x_USB_4x_mSD_OVAL_BASE_v2.stl"
] | CC-BY | https://www.printables.com/model/642899 | data_0033.tar |
559632 | Spartan USB/mSD holder Remix | Spartan USB/mSD holder Remix | Download free 3D printable STL models | [
"usb",
"usbholder"
] | 3D Printers > Accessories | [
"559632/images/image_1_compressed.jpg",
"559632/images/image_2_compressed.jpg"
] | [
"559632/stls/Spartan-5x_USB_4x_mSD_OVAL_BASE.stl"
] | CC-BY | https://www.printables.com/model/559632 | data_0033.tar |
243482 | sparten Card Holder | <p>sparten Card Holder is design base on gadgets.</p> | [
"holder",
"gadgets",
"sdcard",
"sdcardholder"
] | Gadgets > Computers | [
"243482/images/image_1_compressed.jpg",
"243482/images/image_2_compressed.jpg",
"243482/images/image_3_compressed.jpg",
"243482/images/image_4_compressed.jpg"
] | [
"243482/stls/Artwork 223 SD card holder.stl"
] | CC0 | https://www.printables.com/model/243482 | data_0033.tar |
61214 | Spatual - Scraper - Spachtel | <ul><li>30% infill</li><li>0.20 detail</li></ul><p><a href="http://www.thingiverse.com/thing:3406899">http://www.thingiverse.com/thing:3406899</a></p><p> </p><p> </p> | [
"scraper",
"spatula",
"spachtel"
] | 3D Printers > Accessories | [
"61214/images/image_1_compressed.jpg"
] | [
"61214/stls/spatula.stl"
] | CC0 | https://www.printables.com/model/61214 | data_0033.tar |
688622 | Spatula | <p>I needed a spatula for my bed and I couldn't find one I did like. So I created one myself.<br><br>This is the STL file so you can do with it whatever you like. I know it's fairly large but that's because it has not one straight edge. So it should feel nice in the hand.</p> | [
"bed",
"object",
"spatula",
"remove"
] | 3D Printers > Accessories | [
"688622/images/image_1_compressed.jpg",
"688622/images/image_2_compressed.jpg"
] | [
"688622/stls/platenkrabber.stl"
] | CC0 | https://www.printables.com/model/688622 | data_0033.tar |
88881 | Spatula / Scraper |
<p>I made this spatula to lift objects off my print bed without damaging the bed surface. It has round edges to not cut into the surface and is thin enough to do the job. See Print Settings for optimal results.</p>
<h3> Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p><p class="detail-setting... | [
"3dprinting",
"scraper",
"spatula",
"thingiverse"
] | 3D Printers > Accessories | [
"88881/images/image_1_compressed.jpg",
"88881/images/image_2_compressed.jpg",
"88881/images/image_3_compressed.jpg",
"88881/images/image_4_compressed.jpg"
] | [
"88881/stls/spatula.stl"
] | CC-BY | https://www.printables.com/model/88881 | data_0033.tar |
162776 | Spatula / Spachtel | to spread or mix glue paint grease adhesive epoxy silicone - use PETg for flexibility | Download free 3D printable STL models | [
"epoxy",
"spatula",
"spreader",
"trowel",
"spachtel",
"gluespreader",
"epoxyglueapplicator",
"epoxyspatula",
"epoxygluemixingtool",
"zahnspachtel"
] | Hobby & Makers > Tools | [
"162776/images/image_1_compressed.jpg"
] | [
"162776/stls/22-105Spachtel.stl",
"162776/stls/22-105SpachtelS.stl"
] | CC0 | https://www.printables.com/model/162776 | data_0033.tar |
472339 | Specialized Ladegerät SBC-C07 Wandhalterung V2 | <p>V2 - jetzt Online</p><p>Wenn Sie auf der Suche nach einer modernen und praktischen Wandhalterung für Ihr Specialized Ladegerät SBC-C07 sind, dann ist die Halterung die perfekte Lösung für Sie. Die Wandhalterung bietet eine sichere und stabile halt für Ihr Ladegerät.</p><p>Die Halterung ist einfach zu installieren un... | [
"wall",
"holder",
"mount",
"wallmount",
"charger",
"akku",
"ebike",
"wandhalterung",
"turbo",
"fahrrad",
"sbc",
"chargerholder",
"specialized",
"chargermount",
"levo",
"como",
"vado",
"sbcc07",
"c07",
"kenevo"
] | Hobby & Makers > Electronics | [
"472339/images/image_1_compressed.jpg",
"472339/images/image_2_compressed.jpg",
"472339/images/image_3_compressed.jpg",
"472339/images/image_4_compressed.jpg",
"472339/images/image_5_compressed.jpg"
] | [
"472339/stls/Specialized - SBC-C07.stl"
] | CC-BY | https://www.printables.com/model/472339 | data_0033.tar |
227590 | Specialized SWAT Varia radar/Gopro mount | <p>I just bought Garmin Varia radar and was looking for optimal and clean mount. Original mount is okay, but is a little wobble on seat post. It works, but I wanted “peace of mind” mount. I have Specialized bike with SWAT mount holes under my seat, which are occupied with Road bandid tyre kit. So I designed mount which... | [
"gopro",
"garmin",
"radar",
"gopromount",
"swat",
"specialized",
"varia"
] | Sports & Outdoor > Other Sports | [
"227590/images/image_1_compressed.jpg",
"227590/images/image_2_compressed.jpg",
"227590/images/image_3_compressed.jpg",
"227590/images/image_4_compressed.jpg",
"227590/images/image_5_compressed.jpg"
] | [
"227590/stls/SWAT Gopro.stl",
"227590/stls/Varia radar 30 mm longer.stl",
"227590/stls/Varia radar new.stl",
"227590/stls/Varia radar-short.stl",
"227590/stls/Varia radar.stl"
] | GPL2.0 | https://www.printables.com/model/227590 | data_0033.tar |
1013888 | Spectra S1+ Dual Bottle Holder | <p>Follow assembly instructions from original design. Everything is the same except for the slight change to suit the new bottle and body shape. Supports up to 10mm x 3mm round magnets.</p><p>Note that the updated design means the insert and mount only attach in one direction. This is due to the slight offset to increa... | [
"bottleholder",
"spectra"
] | Healthcare > Home Medical Tools | [
"1013888/images/image_1_compressed.jpg",
"1013888/images/image_2_compressed.jpg",
"1013888/images/image_3_compressed.jpg",
"1013888/images/image_4_compressed.jpg"
] | [
"1013888/stls/Bottle Holders.stl",
"1013888/stls/Insert.stl",
"1013888/stls/Mount.stl"
] | CC-BY | https://www.printables.com/model/1013888 | data_0033.tar |
441363 | Speed benchy | <p>Hi, I'm an amateur “bastlíř”. I'm the proud owner of a 3d printer i3 MK3S+ and I want to find out the limits of this printer and how else than 3dbenches. I want to share this experience with you. For each version I always write its pros and cons.</p><p> </p><p><strong>NEW </strong>Version 2.2: </p><p>“add ... | [
"benchy",
"speed",
"3dbenchy",
"workinprogress",
"speedtest",
"3dbenchyboat",
"inprogress",
"thisisaworkinprogress"
] | 3D Printers > Test Models | [
"441363/images/image_1_compressed.jpg"
] | [
"441363/stls/v1.1_FAST_3dbenchy.stl",
"441363/stls/v1.2_FAST_3dbenchy.stl",
"441363/stls/v1.3_FAST_3dbenchy.stl",
"441363/stls/v2.1_FAST_3dbenchy.stl",
"441363/stls/v2_FAST_3dbenchy.stl"
] | CC0 | https://www.printables.com/model/441363 | data_0033.tar |
422968 | Speed Cube - Rubixcube Stand | <p>Summary<br>Speed cube stand that works great with any size: 2x2, 3x3, 4x4, 5x5, etc.</p><p>Also, created a "double stack" version of the design for a little more artistic look. Double stack does not need raft or support.</p><p>Check out my other puzzle stands:</p><p>Pyraminx | https://www.printables.com/model/422966... | [] | Toys & Games > Puzzles & Brain-teasers | [
"422968/images/image_1_compressed.jpg",
"422968/images/image_2_compressed.jpg",
"422968/images/image_3_compressed.jpg",
"422968/images/image_4_compressed.jpg"
] | [
"422968/stls/Speed_Cube_Stand.stl",
"422968/stls/Speed_Cube_Stand_-_Double_Stack.stl"
] | CC-BY | https://www.printables.com/model/422968 | data_0033.tar |
96210 | Speed square | <p>This a basic speed square giving you a 45 and 90 degree angles. It is relatively accurate for most woodworking applications. It can be customized with the owners name if you like. </p> | [
"woodworkingtools",
"woodworkingtool"
] | Hobby & Makers > Tools | [
"96210/images/image_1_compressed.jpg"
] | [
"96210/stls/Speed Square.stl"
] | CC0 | https://www.printables.com/model/96210 | data_0033.tar |
22601 | Speed tower - test your maximum print speed | <p>I needed a calibration model to verify my maximum print speed without sacrificing too much quality.</p>
<p>Made a quick one and it works pretty fine in my opinion...<br/>
Basically it is a cube with chamfers, sharp corners, a hemisphere and overhangs.</p>
<p>The print itself changes its outer shell speed every 15mm ... | [
"speed",
"tower"
] | 3D Printers > Test Models | [
"22601/images/image_1_compressed.jpg",
"22601/images/image_2_compressed.jpg",
"22601/images/image_3_compressed.jpg",
"22601/images/image_4_compressed.jpg",
"22601/images/image_5_compressed.jpg",
"22601/images/image_6_compressed.jpg",
"22601/images/image_7_compressed.jpg"
] | [
"22601/stls/speed-tower.stl"
] | CC-BY | https://www.printables.com/model/22601 | data_0033.tar |
106932 | Speed / Flow Test (40-220 mm/s) | <p>This print is to test ones printers capabilities to print at ever-increasing speed print speeds from 40 mm/s to 220 mm/s in 5 mm steps using print modifiers.</p> | [
"test",
"speed"
] | 3D Printers > Test Models | [
"106932/images/image_1_compressed.jpg",
"106932/images/image_2_compressed.jpg"
] | [
"106932/stls/Speed Test.stl"
] | GPL3.0 | https://www.printables.com/model/106932 | data_0033.tar |
100741 | SpeedBenchy - 3D Printer speed benchmark | <p>Note from comments:</p><blockquote><p>The speedboat challenge is done with the original benchy. The text is meant to be at the bottom and is part of the challenge. Any runs posted without the bottom text or other changes to the model are disqualified. <br><br>The official rules are posted here on the annex engi... | [
"benchmark",
"speed",
"3dbenchy",
"speedboat",
"speedboatrace"
] | 3D Printers > Test Models | [
"100741/images/image_1_compressed.jpg"
] | [
"100741/stls/SpeedBenchy.stl"
] | CC0 | https://www.printables.com/model/100741 | data_0033.tar |
963605 | Speedcube Case - Rubiks Cube Case | <p>Before you print the <strong>Speedcube Case,</strong> check if the cube will fit by printing the <strong>Test Print</strong> first.</p><h4>Features</h4><ul><li>No special hardware needed.</li><li>Available for 0.4mm & 0.6mm nozzle.</li></ul><h4>Recommended Print Settings</h4><ul><li>Nozzle size: 0.4mm or 0.6mm</... | [
"box",
"cube",
"speed",
"rubiks",
"rubikscube"
] | Toys & Games > Puzzles & Brain-teasers | [
"963605/images/image_1_compressed.jpg",
"963605/images/image_2_compressed.jpg",
"963605/images/image_3_compressed.jpg",
"963605/images/image_4_compressed.jpg",
"963605/images/image_5_compressed.jpg"
] | [
"963605/stls/SpeedcubeCase_Nozzle0.4mm_CubeSize50.0mm.stl",
"963605/stls/SpeedcubeCase_Nozzle0.4mm_CubeSize50.0mm_thickWall.stl",
"963605/stls/SpeedcubeCase_Nozzle0.4mm_CubeSize50.5mm.stl",
"963605/stls/SpeedcubeCase_Nozzle0.4mm_CubeSize50.5mm_thickWall.stl",
"963605/stls/SpeedcubeCase_Nozzle0.4mm_CubeSize5... | CC0 | https://www.printables.com/model/963605 | data_0033.tar |
114466 | Spheal | <p>Remix of Elveox's Spheal from Thingiverse. <br>I've cut the bottom of the model off and painted it using prusa Sliver 2.4. <br><br>Multicolour painted files now uploaded as the 3mf file so you can slice it yourself also now<br><br>I've exported GCode with different numbers of spheal on the plate. (1,2,4,6)... | [
"pokemon",
"spheal"
] | Toys & Games > Action Figures & Statues | [
"114466/images/image_1_compressed.jpg",
"114466/images/image_2_compressed.jpg",
"114466/images/image_3_compressed.jpg"
] | [
"114466/stls/Spheal Multi.stl"
] | CC-BY | https://www.printables.com/model/114466 | data_0033.tar |
219390 | Sphere | [
"shape"
] | Art & Design > Sculptures | [
"219390/images/image_1_compressed.jpg"
] | [
"219390/stls/1250_polygon_sphere_100mm.stl"
] | CC0 | https://www.printables.com/model/219390 | data_0033.tar | |
222217 | Sphere Candle Mold with integrated funnel and wick holder | <p>This is my first model and it worked out quite nicely. The candle will have 76mm diameter.</p><p>You will need 4 bolts, atleast 100mm long. I am using 10mm bolds 100mm long. UPDATE: Apparently just strong rubber bands are enough.</p><p>I printed it with eSun PLA+ and it whitstood the candle wax heat good. Before mak... | [
"candle",
"diy",
"mold"
] | Household > Home Decor | [
"222217/images/image_1_compressed.jpg",
"222217/images/image_2_compressed.jpg",
"222217/images/image_3_compressed.jpg",
"222217/images/image_4_compressed.jpg",
"222217/images/image_5_compressed.jpg"
] | [
"222217/stls/sphere_candle_mold.stl",
"222217/stls/wick_holder.stl"
] | CC-BY | https://www.printables.com/model/222217 | data_0033.tar |
626716 | Sphere for rhino | <p>Just a simple sphere for downloading and modifying.</p> | [
"object",
"sphere",
"easyprint"
] | 3D Printers > Accessories | [
"626716/images/image_1_compressed.jpg"
] | [
"626716/stls/sphere.stl"
] | CC-BY | https://www.printables.com/model/626716 | data_0033.tar |
1557809 | Spherical YES/NO Dice | Truncated Orb Set | <p>BOM: Printed with <strong>ROSA3D High Speed PLA Pink</strong></p><p>This is the third and final variation of my decision dice collection.</p><p><strong>The Geometry:</strong> Unlike the chamfered or filleted cubes, this design is a <strong>Truncated Sphere</strong>. Imagine a perfect ball with 6 flat slices cut off ... | [
"toy",
"game",
"no",
"ball",
"geometric",
"rolling",
"fidget",
"dice",
"math",
"smooth",
"sphere",
"decision",
"yes",
"truncated",
"probability",
"orb"
] | Toys & Games > Other Toys & Games | [
"1557809/images/image_1_compressed.jpg",
"1557809/images/image_2_compressed.jpg",
"1557809/images/image_3_compressed.jpg"
] | [
"1557809/stls/YES NO Cube 12 v3.stl",
"1557809/stls/YES NO Cube 18 v3.stl",
"1557809/stls/YES NO Cube 24 v3.stl"
] | CC-BY | https://www.printables.com/model/1557809 | data_0033.tar |
49001 | Sphericon | <p>This is a parametrized Sphericon.</p>
<p>A Sphericon is a mathematical body, that is generated by rotating a polygon around one of its symmetry axes. The resulting body is then cut in half, one half is turned a certain amount, and finally the halves are joined again. Many Sphericons can roll, but with a wobbly motio... | [
"openscad",
"mathart",
"mathematicalart"
] | Art & Design > Other Art & Designs | [
"49001/images/image_1_compressed.jpg",
"49001/images/image_2_compressed.jpg",
"49001/images/image_3_compressed.jpg",
"49001/images/image_4_compressed.jpg",
"49001/images/image_5_compressed.jpg",
"49001/images/image_6_compressed.jpg",
"49001/images/image_7_compressed.jpg",
"49001/images/image_8_compres... | [
"49001/stls/sphericon-print-plate-6p-1.stl",
"49001/stls/sphericon-print-plate-6p-2.stl",
"49001/stls/sphericon-print-plate-curvy.stl",
"49001/stls/sphericon-print-plate.stl"
] | GPL3.0 | https://www.printables.com/model/49001 | data_0033.tar |
12244 | Sphericon 03 (Hexagon Based) | <p><em>"The sphericon is a solid that has a continuous developable surface with two congruent semi circular edges, and four vertices that define a square. It is a member of a special family of rollers that, while being rolled on a flat surface, bring all the points of their surface to contact with the surface they are ... | [
"fusion360",
"thingiverse",
"autodeskfusion360",
"sphericon",
"sphericons",
"hexasphericon"
] | Art & Design > Other Art & Designs | [
"12244/images/image_1_compressed.jpg",
"12244/images/image_2_compressed.jpg",
"12244/images/image_3_compressed.jpg",
"12244/images/image_4_compressed.jpg"
] | [
"12244/stls/hexagon_03-hexagon-body1.stl",
"12244/stls/hexagon_03-mount-body2.stl",
"12244/stls/large_display_hexagon_03-hexagon-body1_12244.stl"
] | CC-BY | https://www.printables.com/model/12244 | data_0033.tar |
657758 | Sphynx cat wall art | <p>Simple beautiful wall art of Sphynx cat</p> | [
"cat",
"lineart",
"wallart",
"sphynx"
] | Art & Design > Wall-mounted | [
"657758/images/image_1_compressed.jpg",
"657758/images/image_2_compressed.jpg"
] | [
"657758/stls/Sphynx-cat.stl"
] | CC-BY | https://www.printables.com/model/657758 | data_0033.tar |
365944 | Spice Box (Storage Box) | <p>This is a very basic storage box for spice's refill bags.</p><p>outside measurements are</p><p>2 MM Thickness<br>110 MM deep<br>75 MM high<br>220 MM wide (I've reduced this measurement in the gcode to 217 MM in order to print well)</p> | [
"box",
"spice",
"rectangle"
] | Household > Kitchen | [
"365944/images/image_1_compressed.jpg"
] | [
"365944/stls/Spice Box V2.stl"
] | CC-BY | https://www.printables.com/model/365944 | data_0033.tar |
117703 | Spice jar gadget for Jetboil Flash | <p>Jetboil Flash is very popular and fast cooking system. Its great design allows you to pack everything into Fluxring cup almost to the top. But only almost because in basic set is some unused volume between gas canister and top brim. It is usually filled by original accessories like Coffee Press and Pot support or tw... | [
"cooking",
"flash",
"hiking",
"organization",
"outdoor",
"spicesorganizer",
"jetboil"
] | Gadgets > Other Gadgets | [
"117703/images/image_1_compressed.jpg",
"117703/images/image_2_compressed.jpg",
"117703/images/image_3_compressed.jpg",
"117703/images/image_4_compressed.jpg",
"117703/images/image_5_compressed.jpg",
"117703/images/image_6_compressed.jpg",
"117703/images/image_7_compressed.jpg",
"117703/images/image_8... | [
"117703/stls/handle.stl",
"117703/stls/jbf_frame_spice_4.stl",
"117703/stls/jbf_frame_spice_4_lw.stl",
"117703/stls/Spice_jar_L_body.stl",
"117703/stls/spice_jar_l_cover.stl",
"117703/stls/spice_jar_l_cover2.stl",
"117703/stls/Spice_jar_S_body.stl",
"117703/stls/spice_jar_s_cover.stl",
"117703/stls/... | CC-BY | https://www.printables.com/model/117703 | data_0033.tar |
266296 | Spice rack | suitable for up to 60mm countainers
fits into IKEA cabinets
2025 - print all in at once model for bigger printers | Download free 3D printable STL models | [
"kitchen",
"spice"
] | Household > Kitchen | [
"266296/images/image_1_compressed.jpg"
] | [
"266296/stls/spicerack.stl"
] | CC0 | https://www.printables.com/model/266296 | data_0033.tar |
209744 | Spice Rack Ankerkraut Wall Bracket for 2 or 3 Glasses | <p>Printed with PLA, 20% infill.</p> | [] | Household > Kitchen | [
"209744/images/image_1_compressed.jpg"
] | [
"209744/stls/Ankerkraut Wall Bracket 2 Bottles.stl",
"209744/stls/Ankerkraut Wall Bracket 3 Bottles.stl"
] | CC0 | https://www.printables.com/model/209744 | data_0033.tar |
146783 | Spice rack for just spices | <p>Spice rack for up to 3 “just spices“ spice containers. Also fits for many other spice jars. Inner diameter<strong> </strong><i>59 mm.</i></p><p>The design fits for up to 3 holders (for a total of 9 spices) inside the cabinet of a typical kitchen door (Ikea). </p><p>Either screwed or glued with 19 mm tape.</p><... | [
"kitchen",
"rack",
"organization",
"spice",
"spicerack",
"spiceholder"
] | Household > Kitchen | [
"146783/images/image_1_compressed.jpg",
"146783/images/image_2_compressed.jpg"
] | [
"146783/stls/Just-spices-holder_3-set.stl",
"146783/stls/small-spice-holder-40mm_4-set.stl"
] | CC0 | https://www.printables.com/model/146783 | data_0033.tar |
70077 | Spice rack for wall cabinet door | <p>I found nothing to my liking online - blender'd my own</p> | [
"spicerack"
] | Household > Kitchen | [
"70077/images/image_1_compressed.jpg",
"70077/images/image_2_compressed.jpg"
] | [
"70077/stls/spicerack.stl",
"70077/stls/spicerack_0.3mm_PLA.stl"
] | CC0 | https://www.printables.com/model/70077 | data_0033.tar |
442218 | Spice Shelves / Spice Rack / Spice Organizer | <p>Height is specified in the print file title. The shelves interlock, as shown. 3in and 6in tall shelves are shown. cabinet is 20.5" wide. Shelves allow for storage underneath them for duplicate spices or anything really.</p><p>Feel free to request any other height or width!</p><p>3rd picture is the "before" picture</... | [
"kitchen",
"organization",
"spicesorganizer",
"spicerack"
] | Household > Kitchen | [
"442218/images/image_1_compressed.jpg",
"442218/images/image_2_compressed.jpg",
"442218/images/image_3_compressed.jpg"
] | [
"442218/stls/3in.stl",
"442218/stls/6in.stl",
"442218/stls/9in.stl"
] | CC-BY | https://www.printables.com/model/442218 | data_0033.tar |
2522 | Spider | <p>Printable Spider, not much to say about it besides that it's a spider... did I mention that it's a spider?</p>
<h3>Print instructions</h3><p>I suggest generating both supports and a brim, the combination of these two should allow it to print perfectly.</p> | [
"spider"
] | World & Scans > Animals | [
"2522/images/image_1_compressed.jpg",
"2522/images/image_2_compressed.jpg"
] | [
"2522/stls/spider_fixed_2.stl"
] | CC-BY | https://www.printables.com/model/2522 | data_0033.tar |
44121 | Spider Bowl | <p>Hello All,<br/>
It's that spooky time of year again. For the season I have a new model for you all. The Spider Bowl. It might be more cute than spooky, but I am sure the kids would enjoy taking the candy from this bowl.<br/>
Its prints in 10 simple parts and assembles easy. You print<br/>
1Body<br/>
1 Hat<br/>
2 of ... | [
"spider",
"bowl",
"candy",
"dsk001"
] | Seasonal designs > Autumn & Halloween | [
"44121/images/image_1_compressed.jpg",
"44121/images/image_2_compressed.jpg",
"44121/images/image_3_compressed.jpg",
"44121/images/image_4_compressed.jpg"
] | [
"44121/stls/body.stl",
"44121/stls/hat.stl",
"44121/stls/leg-1.stl",
"44121/stls/leg-2.stl",
"44121/stls/leg-3.stl",
"44121/stls/leg-4.stl",
"44121/stls/planter.stl"
] | CC-BY | https://www.printables.com/model/44121 | data_0033.tar |
184407 | Spider Cookie Cutter |
<p>I received a request for a Spider Cookie Cutter. This is a Remix of a design posted by oogime. I have made it a bit larger and added additional supports to prevent flexing.</p>
<p>As always, I am including a copy of my basic "Sugar Cookie Dough" recipe.</p>
<p>Once again, Happy Halloween everybody !!!</p>
<h3>Pri... | [
"halloween",
"cookie",
"cookies",
"spider",
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"184407/images/image_1_compressed.jpg",
"184407/images/image_2_compressed.jpg",
"184407/images/image_3_compressed.jpg",
"184407/images/image_4_compressed.jpg",
"184407/images/image_5_compressed.jpg"
] | [
"184407/stls/Spider.stl"
] | CC-BY | https://www.printables.com/model/184407 | data_0033.tar |
272529 | Spider robot(quad robot, quadruped)-SG90 by regishsu | <p>My make of the Spider robot(quad robot, quadruped)-SG90 by <a href="https://www.thingiverse.com/regishsu">regishsu</a> </p><p>using an arduino nano and servo shield with 2x 18650 batteries.</p> | [] | Hobby & Makers > RC & Robotics | [
"272529/images/image_1_compressed.jpg",
"272529/images/image_2_compressed.jpg",
"272529/images/image_3_compressed.jpg",
"272529/images/image_4_compressed.jpg"
] | [
"272529/stls/body_d.stl",
"272529/stls/body_u.stl",
"272529/stls/coxa_l.stl",
"272529/stls/coxa_r.stl",
"272529/stls/femur_1.stl",
"272529/stls/s_hold.stl",
"272529/stls/tibia_l.stl",
"272529/stls/tibia_r.stl"
] | GPL2.0 | https://www.printables.com/model/272529 | data_0033.tar |
44101 | Spider set | <p>You will make their own clothes and masks for Halloween. And you need decoration. You can assemble a set of decorations for Halloween from a few details.<br/>
You will need spiders, spiderweb, a comb and few stones Swarovski.<br/>
You can make these decoration combining the different parts. You can also select a dif... | [
"halloween",
"earrings",
"fashion",
"spider",
"web",
"prusaprinters",
"necklace",
"3dmodel",
"3ddesign",
"tanyaakinora"
] | Seasonal designs > Autumn & Halloween | [
"44101/images/image_1_compressed.jpg",
"44101/images/image_10_compressed.jpg",
"44101/images/image_2_compressed.jpg",
"44101/images/image_3_compressed.jpg",
"44101/images/image_4_compressed.jpg",
"44101/images/image_5_compressed.jpg",
"44101/images/image_6_compressed.jpg",
"44101/images/image_7_compre... | [
"44101/stls/spider-for-set.stl",
"44101/stls/spider-with-ring.stl",
"44101/stls/spider.stl",
"44101/stls/web-comb.stl",
"44101/stls/web-for-set-new.stl",
"44101/stls/web-for-set.stl",
"44101/stls/web.stl"
] | CC-BY | https://www.printables.com/model/44101 | data_0033.tar |
305249 | Spider web | <p>This is a quick and easy to print spider web. You can combine multiple in PrusaSlicer to make a half or full circle. I printed mine in glow in the dark PLA.</p> | [] | Seasonal designs > Autumn & Halloween | [
"305249/images/image_1_compressed.jpg"
] | [
"305249/stls/spider web 4x.stl",
"305249/stls/spider web.stl"
] | CC-BY | https://www.printables.com/model/305249 | data_0033.tar |
82555 | Spider Web Cup Mat | <p>Stylish mat under cup in shape of spider web. It can be used during Halloween party.</p> | [
"decoration",
"cup",
"party",
"decor",
"spider",
"web",
"pad",
"halloweendecoration",
"spiderweb",
"cupmat",
"mat",
"homedecor",
"happyhalloween",
"halloweeen",
"halloweendecor",
"halloween2021",
"partydecor"
] | Seasonal designs > Autumn & Halloween | [
"82555/images/image_1_compressed.jpg",
"82555/images/image_2_compressed.jpg",
"82555/images/image_3_compressed.jpg"
] | [
"82555/stls/web.stl"
] | CC0 | https://www.printables.com/model/82555 | data_0033.tar |
1016836 | Spider web for lego wreath | <p>This is a spider web attachment for <a href="https://www.printables.com/model/218071-lego-wreath">https://www.printables.com/model/218071-lego-wreath,</a> to go with <a href="https://www.thingiverse.com/thing:6746100">https://www.thingiverse.com/thing:6746100</a> (or my remix: <a href="https://www.printables.com/mod... | [
"lego",
"spiderweb",
"wreath"
] | Household > Home Decor | [
"1016836/images/image_1_compressed.jpg",
"1016836/images/image_2_compressed.jpg"
] | [
"1016836/stls/wreath web.stl"
] | CC0 | https://www.printables.com/model/1016836 | data_0033.tar |
293192 | Spider Web Halloween Earrings | <p>Small, lightweight spider web earrings with a separate spider that can be printed and glued in place. Two styles of web for a mismatched pair or two different pairs. I hand drew these webs, so they are unique, but based on other designs out there. Original designer is, of course, a spider. :-)</p><p>I printed these ... | [
"halloween",
"earrings",
"spider",
"spiderweb",
"halloweenearrings"
] | Fashion > Women | [
"293192/images/image_1_compressed.jpg",
"293192/images/image_2_compressed.jpg"
] | [
"293192/stls/spider.stl",
"293192/stls/web1.stl",
"293192/stls/web2.stl"
] | CC-BY | https://www.printables.com/model/293192 | data_0033.tar |
401353 | Spider-Man bust | <p>Spider-Man bust in 1:3 scale from Marvel's Spider-Man game. Printed on ANYCUBIC PHOTON MONO and painted with acrylics</p> | [] | Toys & Games > Action Figures & Statues | [
"401353/images/image_1_compressed.jpg",
"401353/images/image_2_compressed.jpg",
"401353/images/image_3_compressed.jpg",
"401353/images/image_4_compressed.jpg"
] | [
"401353/stls/Base.stl",
"401353/stls/Body.stl",
"401353/stls/Head.stl"
] | CC-BY | https://www.printables.com/model/401353 | data_0033.tar |
100204 | Spider-Man Coaster and Keychain | <p>Spider-Man: No Way Home just came out so here's a Spider-Man coaster & keychain set for you to print! The coaster also makes a good action figure stand, and I am currently using the keychain as a Christmas ornament. :)</p><p>Designed to be printed at .20mm layer height with filament color changes at 2.20mm and 2... | [
"marvel",
"spiderman",
"coaster",
"keychain",
"drinkcoaster",
"3dkeychains"
] | Art & Design > 2D Plates & Logos | [
"100204/images/image_1_compressed.jpg",
"100204/images/image_2_compressed.jpg",
"100204/images/image_3_compressed.jpg"
] | [
"100204/stls/SpidermanCoaster.stl",
"100204/stls/SpiderManKeychain.stl"
] | CC-BY | https://www.printables.com/model/100204 | data_0033.tar |
108242 | Spider-Man Iron Spider Coaster | <p>Here's another Spider-Man coaster, this time based on his Iron Spider outfit from Avengers: Infinity War & Endgame. Also makes a good action figure stand. Happy printing!</p> | [
"marvel",
"spiderman",
"avengers",
"coaster",
"drinkcoaster",
"amazingspiderman"
] | Art & Design > 2D Plates & Logos | [
"108242/images/image_1_compressed.jpg",
"108242/images/image_2_compressed.jpg"
] | [
"108242/stls/IronSpiderCoaster.stl"
] | CC-BY | https://www.printables.com/model/108242 | data_0033.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.