model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
204940 | 1/4 Inch Screw End Adapter for Articulating Camera Mount | <p>I used the 1/4 - 20 screw model combined with the components of the articulating raspberry pi camera mount to create an adapter to end mount a screw-type webcam.</p> | [
"camera",
"mount",
"octoprint"
] | 3D Printers > Accessories | [
"204940/images/image_1_compressed.jpg",
"204940/images/image_2_compressed.jpg"
] | [
"204940/stls/BallEnd.stl",
"204940/stls/MountWithScrew.stl"
] | CC-BY | https://www.printables.com/model/204940 | data_0001.tar |
193062 | 1/4-20 Bolt Knob |
<p>The bolt knob that I printed off thingiverse didn't fit so I made my own. Print knob side down (it should already be oriented that way).</p>
Category: DIY
| [
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"193062/images/image_1_compressed.jpg",
"193062/images/image_2_compressed.jpg",
"193062/images/image_3_compressed.jpg"
] | [
"193062/stls/Quarter_Twenty_Bolt_Knob.stl"
] | CC-BY | https://www.printables.com/model/193062 | data_0001.tar |
22133 | 1/4-inch NPT air tool dust cap | <p>This is a simple, durable dust cap for 1/4" NPT air tools and hoses. I printed with PETG which gives a reasonable amount of flexibility while still holding on tight. It includes reinforcement at the ends and a toothed ring to hold onto your tools/hoses.</p>
<h3>Print instructions</h3><h3>Category: Tools Print Settin... | [
"thingiverse"
] | Hobby & Makers > Tools | [
"22133/images/image_1_compressed.jpg",
"22133/images/image_2_compressed.jpg"
] | [
"22133/stls/airhosecapsimple.stl"
] | CC-BY | https://www.printables.com/model/22133 | data_0001.tar |
41377 | 1/4" hex bit holder for a DeWalt drill | <p>My DeWalt drill is so much better than the cheap one I had before, with one exception, there's no built in place to store the Phillips hex bit! 3D printing to the rescue!</p>
<p>I'm not sure if this is a standard interface shared with other drill manufacturers or models, but it works on my DCD777. There may be oth... | [
"clip",
"drill",
"dewalt",
"hexbit"
] | Hobby & Makers > Tools | [
"41377/images/image_1_compressed.jpg",
"41377/images/image_2_compressed.jpg",
"41377/images/image_3_compressed.jpg",
"41377/images/image_4_compressed.jpg",
"41377/images/image_5_compressed.jpg",
"41377/images/image_6_compressed.jpg"
] | [
"41377/stls/dewallt-drill-hex-holder.stl",
"41377/stls/dewalt-drill-hex-bit-holder-v8.stl"
] | CC-BY | https://www.printables.com/model/41377 | data_0001.tar |
195231 | 1/4" Hex Bit Wrench -- Nozzle Wrench |
<p>This is a simple knob that holds a 1/4" hex bit very solidly. It was designed to be a nozzle-wrench for my Creality CR-10S/Ender 3 type printers, but it can be used with any type of hex bit.</p>
<p>There is no ratchet, the bit is solidly set into the handle. In fact this was designed because when seating a nozzle... | [
"tool",
"3dprinting",
"tools",
"3dprinter",
"crealitycr10",
"thingiverse",
"crealityender3",
"hexbits",
"crealitycr10s",
"fingerwrench",
"palmwrench"
] | Hobby & Makers > Tools | [
"195231/images/image_1_compressed.jpg",
"195231/images/image_2_compressed.jpg"
] | [
"195231/stls/palmwrench-quarter-inch-hex.stl"
] | CC-BY | https://www.printables.com/model/195231 | data_0001.tar |
574435 | 1/4" NPT Male Air Hose Tool Hanger Quick Connect | <p>This hanger works with any ¼" standard quick connect air hose male NPT. It holds (1) tool but can easily be modified to hold multiple in a single row. </p><p>I used PLA with anywhere between 15-30% infill. Did not see any structural differences in the part. </p><p>No supports needed. </p><p>0.2mm laye... | [] | Hobby & Makers > Tools | [
"574435/images/image_1_compressed.jpg",
"574435/images/image_2_compressed.jpg",
"574435/images/image_3_compressed.jpg",
"574435/images/image_4_compressed.jpg",
"574435/images/image_5_compressed.jpg",
"574435/images/image_6_compressed.jpg",
"574435/images/image_7_compressed.jpg"
] | [
"574435/stls/air_tool_hanger.stl"
] | CC0 | https://www.printables.com/model/574435 | data_0001.tar |
84847 | 1/4" to 5"8 Thread adapter | <p>I created this, because i had to put a light, with a 5/8" inner thread, onto a tripod with a ¼" outer thread.</p><p>you can simply screw it onto your ¼" thread with a screwdriver.</p><p>I tested and printed this with petg, 0.2mm and 50% infill, works perfectly fine.</p> | [] | Hobby & Makers > Mechanical Parts | [
"84847/images/image_1_compressed.jpg",
"84847/images/image_2_compressed.jpg",
"84847/images/image_3_compressed.jpg",
"84847/images/image_4_compressed.jpg",
"84847/images/image_5_compressed.jpg",
"84847/images/image_6_compressed.jpg"
] | [
"84847/stls/adapter.stl"
] | CC0 | https://www.printables.com/model/84847 | data_0001.tar |
184328 | 1/4", 3/8", 1/2" Socket Storage / Organizaton | <p>I was finally able to acquire some Pegboard for the garage, so I could hang up and organize all the tools I've accumulated over the years.</p><p>Thingiverse has been very helpful with the numerous Pegboard Hooks and accessories that are available for download and printing.</p><p>I was unable to find a suitable downl... | [
"tool",
"wrench",
"socket",
"storage",
"organization",
"tools",
"sockets",
"thingiverse",
"sets"
] | Hobby & Makers > Other Ideas | [
"184328/images/image_1_compressed.jpg",
"184328/images/image_2_compressed.jpg",
"184328/images/image_3_compressed.jpg",
"184328/images/image_4_compressed.jpg",
"184328/images/image_5_compressed.jpg",
"184328/images/image_6_compressed.jpg",
"184328/images/image_7_compressed.jpg",
"184328/images/image_8... | [
"184328/stls/25_inch_Clip.stl",
"184328/stls/375_inch_Clip.stl",
"184328/stls/5_inch_Clip.stl",
"184328/stls/Rail.stl"
] | CC-BY | https://www.printables.com/model/184328 | data_0001.tar |
1348775 | 1/64TH Box Truck Load | <p>This is a 1/64th Box Truck Load that can be attached to vehicles without altering the vehicke. I used Gorilla glue to attach.</p> | [] | Toys & Games > Vehicles | [
"1348775/images/image_1_compressed.jpg",
"1348775/images/image_2_compressed.jpg",
"1348775/images/image_3_compressed.jpg",
"1348775/images/image_4_compressed.jpg",
"1348775/images/image_5_compressed.jpg"
] | [] | CC0 | https://www.printables.com/model/1348775 | data_0001.tar |
1348738 | 1/64th Tank Load | <p>This is a 1/64th scale tank load. It can be attached without vehicle alteration. I used Gorilla glue to attach. </p> | [] | Toys & Games > Vehicles | [
"1348738/images/image_1_compressed.jpg",
"1348738/images/image_2_compressed.jpg",
"1348738/images/image_3_compressed.jpg",
"1348738/images/image_4_compressed.jpg",
"1348738/images/image_5_compressed.jpg"
] | [] | CC0 | https://www.printables.com/model/1348738 | data_0001.tar |
281379 | 1:8 scale camp stove like coleman | <p>nozzle: 0.4</p><p>parts:</p><p>M2 x 4mm ( visual gas cap)</p><p>M2 x 8mm </p><p>M2 x 25mm </p> | [] | Hobby & Makers > RC & Robotics | [
"281379/images/image_1_compressed.jpg",
"281379/images/image_2_compressed.jpg",
"281379/images/image_3_compressed.jpg",
"281379/images/image_4_compressed.jpg"
] | [
"281379/stls/Base.stl",
"281379/stls/burners.stl",
"281379/stls/GasTank.stl",
"281379/stls/grill.stl",
"281379/stls/Lid.stl"
] | CC0 | https://www.printables.com/model/281379 | data_0001.tar |
115768 | 1×5.25" Optical Disk Drive Bay to 4×2.5" up to 15mm thick | <p>This print is a conversion from now mostly useless optical drive bays (discs/DVD/CD bays), AKA 5.25" drives. The adapter will fit up to 4 2.5" drives instead and can fit all standard formats (so each of the 7mm, 9.5mm, and 15mm thick variants). Essentially, you can turn a single 5.25" bay into up to 4 of the highest... | [
"storage",
"adapter",
"hdd",
"drive",
"dvd",
"disk",
"25",
"ssd",
"cd",
"15mm",
"7mm",
"9mm",
"optical",
"nas",
"bay",
"sff",
"optiplex",
"525"
] | Gadgets > Computers | [
"115768/images/image_1_compressed.jpg",
"115768/images/image_2_compressed.jpg",
"115768/images/image_3_compressed.jpg",
"115768/images/image_4_compressed.jpg",
"115768/images/image_5_compressed.jpg"
] | [
"115768/stls/4D1B_rev30.stl"
] | CC-BY | https://www.printables.com/model/115768 | data_0001.tar |
204617 | 1€ Shopping cart coins with Hexagons | Here are more 1€ Shopping cart coins. | Download free 3D printable STL models | [
"hexagon",
"ikea",
"coin",
"euro",
"shop",
"shopping",
"aldi",
"shoppingcart",
"shoppingcartcoin",
"shoppingtrolleycoin",
"lidl",
"shoppingcarttoken"
] | Gadgets > Other Gadgets | [
"204617/images/image_1_compressed.jpg",
"204617/images/image_2_compressed.jpg",
"204617/images/image_3_compressed.jpg",
"204617/images/image_4_compressed.jpg",
"204617/images/image_5_compressed.jpg",
"204617/images/image_6_compressed.jpg",
"204617/images/image_7_compressed.jpg",
"204617/images/image_8... | [
"204617/stls/Shopping Coin multi Hexagon short.stl",
"204617/stls/Shopping Coin row Hexagon long.stl",
"204617/stls/Shopping Coin short.stl",
"204617/stls/Shopping Coin single Hexagon long.stl",
"204617/stls/Shopping Coin single Hexagon short.stl"
] | CC-BY | https://www.printables.com/model/204617 | data_0001.tar |
163523 | 2 and 3 Digit Mechanical Counter | <p><strong>General</strong><br>In search for a mechanical counter to match with my engine models, I came across this beautiful prototype by <i>3D Printy</i>: <a href="https://www.printables.com/model/97885-mechanical-counter-prototype">Mechanical Counter Prototype by 3D Printy | Download free STL model | Printables.com... | [] | Hobby & Makers > Mechanical Parts | [
"163523/images/image_1_compressed.jpg",
"163523/images/image_2_compressed.jpg",
"163523/images/image_3_compressed.jpg",
"163523/images/image_4_compressed.jpg",
"163523/images/image_5_compressed.jpg",
"163523/images/image_6_compressed.jpg",
"163523/images/image_7_compressed.jpg",
"163523/images/image_8... | [
"163523/stls/00-Counter Assembled.stl",
"163523/stls/01-Counter-Exploded View.stl",
"163523/stls/02-Case-Exploded View.stl",
"163523/stls/A1-Start Lid.stl",
"163523/stls/A10-Core.stl",
"163523/stls/A11-End Lid.stl",
"163523/stls/A2-Drive Gears.stl",
"163523/stls/A3-Control Ring.stl",
"163523/stls/A4... | CC0 | https://www.printables.com/model/163523 | data_0001.tar |
1022451 | 2 color pumpkin pendant or decoration | <p>This simple model, sized to 41 x 47 mm can be used as decoration or pendant or as anything else.<br><br>I printed it with a nozzle of 0.4mm and a layer height of 0.3mm When slicing, you need to set the material change on the correct layer.</p><p><br><img class="image_resized" style="width:45.02%;" src="https://media... | [
"halloween",
"pumpkin",
"fashion",
"pendant",
"pumpkins",
"jewellery",
"fashionaccessories"
] | Art & Design > 2D Plates & Logos | [
"1022451/images/image_1_compressed.jpg",
"1022451/images/image_2_compressed.jpg",
"1022451/images/image_3_compressed.jpg",
"1022451/images/image_4_compressed.jpg",
"1022451/images/image_5_compressed.jpg",
"1022451/images/image_6_compressed.jpg"
] | [
"1022451/stls/Pumpkin-2D with no hole.stl",
"1022451/stls/Pumpkin-2D.stl"
] | CC-BY | https://www.printables.com/model/1022451 | data_0001.tar |
471485 | 2 cup pet food scoop | <p>will need some supports.</p> | [
"cup",
"dog",
"cat",
"food",
"scoop"
] | Household > Pets | [
"471485/images/image_1_compressed.jpg",
"471485/images/image_2_compressed.jpg",
"471485/images/image_3_compressed.jpg",
"471485/images/image_4_compressed.jpg"
] | [
"471485/stls/pet food scoop.stl"
] | CC0 | https://www.printables.com/model/471485 | data_0001.tar |
580987 | 2 DOF Fully Compliant Space Pointing Mechanism | <h3>Summary</h3><p>This two degree-of-freedom pointer device uses compliant mechanism technology to obtain its motion. It was developed by the BYU Compliant Mechanisms Research group (compliantmechanisms.byu.edu), under a grant from NASA.</p><p>3 versions of the device are included: the original file used in the metal ... | [
"spacex",
"space",
"rocket",
"model",
"flexible",
"nasa",
"compliant",
"satellite",
"compliantmechanism",
"thruster",
"veritasium",
"byucmr",
"byu",
"2dof"
] | Learning > Engineering | [
"580987/images/image_1_compressed.jpg",
"580987/images/image_2_compressed.jpg",
"580987/images/image_3_compressed.jpg",
"580987/images/image_4_compressed.jpg"
] | [
"580987/stls/pointer_mech_for3dprinting_thick.stl",
"580987/stls/pointer_mech_for3dprinting_thin.stl",
"580987/stls/pointer_mech_original.stl"
] | CC-BY | https://www.printables.com/model/580987 | data_0001.tar |
172439 | 2 Euro Coin Case for 10 Coins | <p>2 euro coin case. 10 coins fit into it.</p><p>My other coin cases for 1 euro and 50 cent coins:</p><ul><li><a href="https://www.printables.com/model/172436-1-euro-coin-case-for-10-coins">1 Euro</a></li><li><a href="https://www.printables.com/model/172441-050-euro-coin-case-for-10-coins">50 Cent</a></li></ul> | [
"box",
"case",
"coin",
"euro",
"2euro"
] | Hobby & Makers > Organizers | [
"172439/images/image_1_compressed.jpg",
"172439/images/image_2_compressed.jpg"
] | [
"172439/stls/Case.stl",
"172439/stls/Cover.stl"
] | CC-BY | https://www.printables.com/model/172439 | data_0001.tar |
469309 | 2 Euro Dummy | <p>Die Münze ist ein Maßdublikat und darf nicht für illegale Verwendungszwecke benutzt werden. Ich übernehme keine Haftung.</p> | [
"euro"
] | Gadgets > Other Gadgets | [
"469309/images/image_1_compressed.jpg"
] | [
"469309/stls/2 Euro.stl"
] | CC0 | https://www.printables.com/model/469309 | data_0001.tar |
524670 | 2 Piece Feet for Ikea Skadis Stand | <p>Using <a href="https://www.printables.com/model/422028-low-profile-ikea-skadis-stand"><strong>Low-Profile Ikea Skadis Stand</strong></a><a href="https://www.printables.com/@BN3D"> by BN3D</a> as a staring point, this remix has two sides that create a similar style leg for the Skadis peg board.</p><p>Each leg is 120m... | [
"organiser",
"pegboard",
"skadis",
"pegboardmount",
"classroom",
"pegboardlegs"
] | Household > Office | [
"524670/images/image_1_compressed.jpg",
"524670/images/image_2_compressed.jpg",
"524670/images/image_3_compressed.jpg"
] | [
"524670/stls/bolt-foot.stl",
"524670/stls/nut-foot.stl"
] | CC-BY | https://www.printables.com/model/524670 | data_0001.tar |
423220 | 2 piece key puzzle | <p>simple key puzzle</p><p>Prints OK down to 80% scale</p><p>Category: 3D Printing</p> | [
"puzzle",
"fun",
"easy",
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"423220/images/image_1_compressed.jpg",
"423220/images/image_2_compressed.jpg",
"423220/images/image_3_compressed.jpg",
"423220/images/image_4_compressed.jpg"
] | [
"423220/stls/KEY1v2.stl",
"423220/stls/KEY2v2.stl"
] | CC-BY | https://www.printables.com/model/423220 | data_0001.tar |
603553 | 2 port female JST-XH splitter | <p>Perfect for connecting two fans to one wire. </p> | [] | 3D Printers > Voron Parts & Upgrades | [
"603553/images/image_1_compressed.jpg"
] | [
"603553/stls/JST2PinSplitter v6.stl"
] | CC0 | https://www.printables.com/model/603553 | data_0001.tar |
744520 | 2 sided dice | <p>A simple 2 sided dice, coins are overrated.</p>
Category: Dice | [
"coin",
"dnd",
"dice",
"thingiverse"
] | Toys & Games > Board Games | [
"744520/images/image_1_compressed.jpg"
] | [
"744520/stls/2-sided-dice_v1.stl"
] | CC-BY | https://www.printables.com/model/744520 | data_0001.tar |
508376 | 2 Small Glue Stick holder Gridfinity 1x1 | <p>Coltonjprince is the original designer. I simply uploaded here.</p><p>1x1 Gridfinity module that is compatible with the original designs by Zack Freedman. Fits small (20mm) glue sticks</p><p> </p> | [
"glue",
"gridfinity"
] | Hobby & Makers > Organizers | [
"508376/images/image_1_compressed.jpg",
"508376/images/image_2_compressed.jpg"
] | [
"508376/stls/Glue stick holder- Gridfinity.stl"
] | CC-BY | https://www.printables.com/model/508376 | data_0001.tar |
237185 | 2 x 2 Gridfinity Nippers Rack | <p>Hi Everybody,</p><p>i tried the parametric fusion360 model for the 2x2 version but the rear wall had some errors. I shortened the first slot via parameter "sketch 6 -> linear dimenson-2/d144" from 17 to 14 mm. </p><p>Printed on Sidewinder X1 in 0.4 layer height. Took about 2h45m to print.</p> | [
"pliers",
"rack",
"plier",
"stripper",
"racks",
"gridfinity",
"nippers",
"nipper",
"strippers"
] | Hobby & Makers > Organizers | [
"237185/images/image_1_compressed.jpg"
] | [
"237185/stls/nipper_2x2.stl"
] | CC0 | https://www.printables.com/model/237185 | data_0001.tar |
206434 | 2-Color Dolphin (Remix) Key Chain | <p>When I saw the original design, I thought that it would make a great key chain for my daughter (she's 30 but still loves dolphins). I reduced the size by 50%, and added the key chain hole. I was worried about it being strong enough (the first layer in parts was only 1mm thick), so I doubled the weak spots to 2mm. I ... | [
"keychain",
"thingiverse",
"dolphin",
"2colors"
] | Fashion > Other Fashion Accessories | [
"206434/images/image_1_compressed.jpg",
"206434/images/image_2_compressed.jpg",
"206434/images/image_3_compressed.jpg"
] | [
"206434/stls/blue.stl",
"206434/stls/white.stl"
] | CC-BY | https://www.printables.com/model/206434 | data_0001.tar |
99245 | 2-digit Game Counter | <p>best to print with color change for readability</p> | [
"counter",
"boardgame",
"gamecounter"
] | Toys & Games > Board Games | [
"99245/images/image_1_compressed.jpg",
"99245/images/image_2_compressed.jpg",
"99245/images/image_3_compressed.jpg"
] | [
"99245/stls/Bottom.stl",
"99245/stls/LeftWheel.stl",
"99245/stls/RightWheel.stl",
"99245/stls/Top.stl"
] | CC0 | https://www.printables.com/model/99245 | data_0001.tar |
447770 | 2-part Honeycomb generic steel sheet holder | <p>This is a simple remix of the Honeycomb Prusa Steel Sheet holder made to be printable on smaller printers (like the MINI+) and usable for various sheet sizes. I've realized that by attaching the holder to the wall the middle section becomes pretty much redundant, so I arbitrarily cut off a significant portion of it ... | [
"organizer",
"honeycomb",
"steelsheetholder",
"honeycombstorage",
"honeycombstoragewall",
"honeycombwall"
] | Art & Design > Wall-mounted | [
"447770/images/image_1_compressed.jpg",
"447770/images/image_2_compressed.jpg"
] | [
"447770/stls/plate_holder_side_L.stl",
"447770/stls/plate_holder_side_L_shifted.stl",
"447770/stls/plate_holder_side_R.stl",
"447770/stls/plate_holder_side_R_shifted.stl"
] | CC0 | https://www.printables.com/model/447770 | data_0001.tar |
260709 | 2-piece Minecraft creeper |
<p>Yet another Minecraft creeper model, because there isn't enough of them on here :)</p>
<p>I didn't like the overhang artifacts on the faces of the one-piece models on here, so I threw this one together, which prints as two separate pieces for better finished quality. Print the head (creeper_head.stl) face-up, and... | [
"thingiverse"
] | Toys & Games > Action Figures & Statues | [
"260709/images/image_1_compressed.jpg",
"260709/images/image_2_compressed.jpg",
"260709/images/image_3_compressed.jpg",
"260709/images/image_4_compressed.jpg",
"260709/images/image_5_compressed.jpg"
] | [
"260709/stls/creeper_body.stl",
"260709/stls/creeper_head.stl",
"260709/stls/creeper_preview.stl"
] | CC0 | https://www.printables.com/model/260709 | data_0001.tar |
431611 | 2-roll 35mm compact film case | <p>Print in black, and with all perimeters (instead of infill) to be light-tight.</p><p>The bottom or top is a prime spot for some embossing! My own has my initials at a depth of 0.3mm.</p><p>Unfortunately I never got around to designing a hinge mechanism for the lid. I found this design to be mostly usable, even one-h... | [
"film",
"35mm",
"35mmfilmholder"
] | Gadgets > Photo & Video | [
"431611/images/image_1_compressed.jpg"
] | [
"431611/stls/2-roll case lid.stl",
"431611/stls/2-roll case.stl"
] | CC-BY | https://www.printables.com/model/431611 | data_0001.tar |
507265 | 2-Side cucumber Plant Wire Grow Clamp | <p>A clamp for the Plant </p><p>2sides so it sticks into the wire no movement (pressed)</p><p>Expand 5% for better fitting</p><p> </p><p> </p> | [
"plant",
"clamp",
"fastprint",
"fastprinting",
"suportless",
"cucumber",
"gurken",
"pflanzenklemme"
] | Household > Outdoor & Garden | [
"507265/images/image_1_compressed.jpg",
"507265/images/image_2_compressed.jpg"
] | [
"507265/stls/gurken_clamp.stl"
] | CC0 | https://www.printables.com/model/507265 | data_0001.tar |
314247 | 2.5 to 3.5 Adapter | <p>Ever been in a situation where you need to upgrade your computer's storage and realize that the new super fast 2.5in SSD doesn't bolt to the 'old' 3.5in HDD drive bay? (assuming that the SATA or SAS + power are fixed in place and the drive bay slides in)</p><p>Well, this adapter is for you!</p><p>You must be careful... | [
"ssdadapter",
"25to35adapter",
"ssdtohdd"
] | Household > Office | [
"314247/images/image_1_compressed.jpg",
"314247/images/image_2_compressed.jpg",
"314247/images/image_3_compressed.jpg",
"314247/images/image_4_compressed.jpg",
"314247/images/image_5_compressed.jpg"
] | [
"314247/stls/2_5_to_3_5_Adapter_1mm.stl",
"314247/stls/2_5_to_3_5_Adapter_1_5mm.stl",
"314247/stls/2_5_to_3_5_Adapter_2mm.stl"
] | CC0 | https://www.printables.com/model/314247 | data_0001.tar |
272499 | 2.5D Butterfly | <p>Just a simple butterfly for your wall or window or garden. Change size and tie up with fishing string.</p> | [
"butterfly",
"ornament"
] | Art & Design > 2D Plates & Logos | [
"272499/images/image_1_compressed.jpg"
] | [
"272499/stls/Butterfly.stl"
] | CC-BY | https://www.printables.com/model/272499 | data_0001.tar |
252913 | 2.5mm Allen key handle | <p>Printable accessory developed specifically to improve the assembly experience for the Original Prusa Enclosure.<br> </p><p>To assemble this print you need an 2.5mm Allen key (part of the package) and the following printed parts:</p><ul><li>Allen key handle</li><li>Allen key holder A</li><li>Allen key holder B</... | [
"mk3s",
"originalprusaenclosure"
] | 3D Printers > Accessories | [
"252913/images/image_1_compressed.jpg"
] | [
"252913/stls/Allen-key-handle.stl",
"252913/stls/Allen-key-holder-A.stl",
"252913/stls/Allen-key-holder-B.stl"
] | GPL2.0 | https://www.printables.com/model/252913 | data_0001.tar |
174039 | 2.5" HDD Case | <h3>3D printed 2.5" HDD Enclosure</h3><p>A simple 3D printed case for an old 2.5" HDD. The case is designed such that, for the most part, it is a push-fit, with four nuts at the bottom, mounting the drive to the plastic case.</p><h3>Equipment List</h3><ul><li><a href="https://www.amazon.co.uk/gp/product/B08HVNV7SC/ref=... | [
"case",
"enclosure",
"hdd",
"harddrive",
"ssd",
"3dprinted",
"thingiverse",
"hddenclosure",
"harddrivemount",
"hddmount",
"hddstand",
"25hdd",
"harddiskdrive",
"harddrivebrackets",
"25harddrive",
"25ssd",
"hddcase",
"hddcover",
"harddrivecase"
] | Hobby & Makers > Electronics | [
"174039/images/image_1_compressed.jpg",
"174039/images/image_2_compressed.jpg",
"174039/images/image_3_compressed.jpg",
"174039/images/image_4_compressed.jpg",
"174039/images/image_5_compressed.jpg"
] | [
"174039/stls/2.5_Inch_Hard_Drive_Assembly.stl",
"174039/stls/Case_Bottom.stl",
"174039/stls/Case_Top.stl",
"174039/stls/HDD.stl"
] | CC-BY | https://www.printables.com/model/174039 | data_0001.tar |
190071 | 2.5" HDD Storage Holder xxl |
<p>Remix of Randy78s 2.5" HDD Storage Holder which has maximum 10 hard drives, mine is the same but with 15 drives which is pretty much the maximum you can print on a generic 200x200 bed.</p>
<h3>Print Settings</h3>
<p><strong>Printer:</strong></p>
<p>Prusa i3 Clone</p>
<p class="detail-setting rafts"><strong>Rafts:... | [
"thingiverse"
] | Gadgets > Computers | [
"190071/images/image_1_compressed.jpg",
"190071/images/image_2_compressed.jpg"
] | [
"190071/stls/25__hdd_15.stl"
] | CC-BY | https://www.printables.com/model/190071 | data_0001.tar |
506917 | 2.5" HDD/SSD External case | <p>Made this hard drive case to compliment my Orange Pi 3 LTS case. The cable I use with this is a Startech SATA to USB 3.0 adapter.</p>
<p>While not a rugged case. It's more or less designed to add a little bit of protection while this Pi and HDD live in my media cabinet.</p>
<h3>Print Settings</h3>
<p><strong>Printer... | [
"ssd",
"thingiverse",
"externalharddrive"
] | Gadgets > Computers | [
"506917/images/image_1_compressed.jpg",
"506917/images/image_2_compressed.jpg",
"506917/images/image_3_compressed.jpg"
] | [
"506917/stls/lower_ssd_tray.stl",
"506917/stls/top_ssd_tray.stl"
] | CC-BY | https://www.printables.com/model/506917 | data_0001.tar |
1050525 | 2.5" Ornament Jig (XTool F1 Ultra) | <p>This is a Remix, but it was posted in a FB group so I can't link the original.</p><p>Original model posted by Hiddenwoods Art in an XTool F1 Ultra Facebook Group. I edited the model to fit the smaller ornaments I had.</p><p>This jig is to make it easy to engrave 2.5" glass ornaments on the XTool F1 Ultra. It secures... | [
"laser",
"jig",
"glass",
"f1",
"ornament",
"ultra",
"globe",
"engrave",
"walmart",
"xtool"
] | Hobby & Makers > Tools | [
"1050525/images/image_1_compressed.jpg",
"1050525/images/image_2_compressed.jpg"
] | [
"1050525/stls/Ornament jig 2.5 Inch.stl"
] | CC0 | https://www.printables.com/model/1050525 | data_0001.tar |
970027 | 2.5" SSD case | <p>The case is designed for 2.5" SSDs according to the dimensions below:</p><figure class="image"><img src="https://media.printables.com/media/prints/970027/rich_content/e90f273e-e3be-4065-acc0-890aa27dfa54/capture-decran-2024-08-10-150746.png#%7B%22uuid%22%3A%22a4ae39f6-9dc7-4063-9465-2f0c958e3020%22%2C%22w%22%3A4564%... | [
"hexagon",
"box",
"case",
"clip",
"enclosure",
"2",
"easytoprint",
"computer",
"storage",
"easy",
"hex",
"inches",
"drive",
"5",
"pc",
"ssd",
"clips",
"sata",
"screwless",
"solid",
"cases",
"state",
"easyprint",
"computeraccessories",
"easyassembly",
"boxes",
"ssd... | Gadgets > Computers | [
"970027/images/image_1_compressed.jpg",
"970027/images/image_2_compressed.jpg",
"970027/images/image_3_compressed.jpg",
"970027/images/image_4_compressed.jpg",
"970027/images/image_5_compressed.jpg"
] | [
"970027/stls/SSD_case_part_1_VF.stl",
"970027/stls/SSD_case_part_2_VF.stl"
] | CC-BY | https://www.printables.com/model/970027 | data_0001.tar |
1317611 | 2.5" SSD to 3.5" HDD Triple Drive Caddy Adapter, Tooless | <p><strong>Update 2026-03-25:</strong> Migrated files to FreeCAD 1.1.0 Stable.</p><p>This adapter allows you to convert a 3.5" drive bay into a triple 2.5" SSDs/HDDs drive caddy. Unlike bolted adapter designs, you can easily replace individual drives without unmounting the entire triple drive assembly.</p><div dat... | [
"computer",
"storage",
"adapter",
"hdd",
"harddrive",
"ssd",
"drivecaddy"
] | Gadgets > Computers | [
"1317611/images/image_1_compressed.jpg",
"1317611/images/image_2_compressed.jpg",
"1317611/images/image_3_compressed.jpg",
"1317611/images/image_4_compressed.jpg",
"1317611/images/image_5_compressed.jpg"
] | [
"1317611/stls/6-32 Caddy Assembly.stl",
"1317611/stls/Caddy 6-32 Insert.stl",
"1317611/stls/Caddy 6-32.stl",
"1317611/stls/Caddy M3 Insert.stl",
"1317611/stls/Caddy M3.stl",
"1317611/stls/Sled Bolt-on One Piece.stl",
"1317611/stls/Sled Bolt-on Two Piece.stl",
"1317611/stls/Sled Tooless One Piece.stl",... | CC-BY | https://www.printables.com/model/1317611 | data_0001.tar |
226656 | 2.5" SSD to 3.5" SATA Bay Adapter | <blockquote><p><i><strong>Make sure to like and rate the file if you found it useful! Tips are also appreciated if you'd like to see more files from me or if you would like to request changes or updates to files!</strong></i></p><figure class="table"><table><tbody><tr><td><p><a href="https://checkout.stripe.com/c/pay/c... | [
"adapter",
"harddrive",
"ssd",
"drivebay"
] | Gadgets > Computers | [
"226656/images/image_1_compressed.jpg",
"226656/images/image_2_compressed.jpg"
] | [
"226656/stls/ssd_driveBayAdapter_long.stl",
"226656/stls/ssd_driveBayAdapter_rail.stl"
] | CC-BY | https://www.printables.com/model/226656 | data_0001.tar |
343441 | 2.5" SSD / HDD Mount for HP 800 G3 | <p>Just a very simple little print for proper mounting of a 2 1/2 inch Solid State Drive or Hard Disk Drive in the Hewlett Packard 800 G3 Mini's drive ‘cage’, using M3x8 button head cap screws.</p><p>---------</p><p>I printed mine in ABS because that's what was handy, but it should work fine with PLA or whatever else y... | [
"ssd",
"hewlettpackard",
"ssdmount"
] | Gadgets > Computers | [
"343441/images/image_1_compressed.jpg",
"343441/images/image_2_compressed.jpg"
] | [
"343441/stls/HP_800_G3_SSD_Mount.stl"
] | CC0 | https://www.printables.com/model/343441 | data_0001.tar |
101538 | 20 Sided Dice - Blank | <p>Just simply, a blank 20 sided dice. Used for boardgames and miniature warfare. Its blank so if you want you can add your own graphics to each side when u print. Feel free to remix it with your own shapes or send me a PM if you have any requests!</p><p>Made in Fusion 360, by me !</p><p>Supports made in Ultimaker Cura... | [
"game",
"dice",
"warhammer",
"boardgame",
"warhammer40k"
] | Toys & Games > Board Games | [
"101538/images/image_1_compressed.jpg",
"101538/images/image_2_compressed.jpg"
] | [
"101538/stls/dice-20.stl"
] | CC-BY | https://www.printables.com/model/101538 | data_0001.tar |
966872 | 200% Dummy 13 Modified | <p>DUMMY 13 resized to 200% with a few alterations.</p><p>200% feels like how this model was meant to be.</p><p>This model does rely on strong materials, I’ve had good results with high quality PLA. </p><p>I've added a couple of test STLs so you can test your filament is suitable.</p><p>I've resized a few individu... | [
"13",
"dummy",
"lucky"
] | Toys & Games > Action Figures & Statues | [
"966872/images/image_1_compressed.jpg",
"966872/images/image_10_compressed.jpg",
"966872/images/image_11_compressed.jpg",
"966872/images/image_2_compressed.jpg",
"966872/images/image_3_compressed.jpg",
"966872/images/image_4_compressed.jpg",
"966872/images/image_5_compressed.jpg",
"966872/images/image... | [
"966872/stls/200%-frame-altered-2.stl",
"966872/stls/200%armourparts-blank.stl",
"966872/stls/200%armourparts.stl",
"966872/stls/ankle.stl",
"966872/stls/arm.stl",
"966872/stls/body.stl",
"966872/stls/chunky-arms.stl",
"966872/stls/chunky-body.stl",
"966872/stls/chunky-legs.stl",
"966872/stls/hand... | CC-BY | https://www.printables.com/model/966872 | data_0001.tar |
94440 | 200mm height test |
<p>This model is a 200mm high tower and was made to test my printer at higher points to see if there was any z banding before a large print.</p>
<p>The middle column is supported from 4 sides so shouldn't show much wobble but may still have a bit depending on speed and jerk of your bed movements</p>
Category: 3D P... | [
"thingiverse"
] | 3D Printers > Test Models | [
"94440/images/image_1_compressed.jpg",
"94440/images/image_2_compressed.jpg"
] | [
"94440/stls/Height_test.stl"
] | CC-BY | https://www.printables.com/model/94440 | data_0001.tar |
228782 | 200mm Silica gel spool container | <p>No supports are necessary. I printed it in Prusament Jet Black with .4mm nozzle at .2mm layer height.</p> | [
"silica",
"molecular",
"silicagel",
"3a",
"sieve",
"silicagelcontainer",
"3amolecularsieve"
] | 3D Printers > Accessories | [
"228782/images/image_1_compressed.jpg"
] | [
"228782/stls/200mm Container.stl",
"228782/stls/Cap.stl"
] | CC0 | https://www.printables.com/model/228782 | data_0001.tar |
404254 | 2020 Alu extrusion Webcam Mount for AUKEY 1080P Webcam | <h3><strong>2020 Aluextrusion Webcam Mount for AUKEY 1080p Webcam</strong></h3><figure class="image image-style-align-center"><img src="https://media.printables.com/media/prints/404254/rich_content/0c872002-5cc4-41bd-946e-25f3683b2f2e/aukey-cam-render.png#%7B%22uuid%22%3A%22698dbb85-82d7-4201-a10a-b2b2b1b86f52%22%2C%22... | [
"webcam",
"voron",
"aukey",
"1080p",
"2020framemount"
] | 3D Printers > Other Printer Parts & Upgrades | [
"404254/images/image_1_compressed.jpg"
] | [
"404254/stls/2020_mount-basic.stl",
"404254/stls/2020_mount-gantry.stl",
"404254/stls/2020_mount-gantry_short.stl",
"404254/stls/cam_body.stl",
"404254/stls/cam_cover-logo1.stl",
"404254/stls/cam_cover-logo2.stl",
"404254/stls/cam_cover-logo3.stl",
"404254/stls/[a]_cam_cover.stl"
] | CC0 | https://www.printables.com/model/404254 | data_0001.tar |
208845 | 2020 Aluminum Extrusion Cover | <p>A cover for the grooves in 2020 aluminum extrusion that simply snaps into place. Used to cover wires or simply to give a little color to 2020 aluminum extrusion.</p><p>To change the length of the of this cover in PrusaSlicer (see PrusaSlicer image):<br>1. Click on the scale icon.<br>2. Click on the lock to dis... | [
"2020",
"2020extrusion"
] | Hobby & Makers > Other Ideas | [
"208845/images/image_1_compressed.jpg",
"208845/images/image_2_compressed.jpg",
"208845/images/image_3_compressed.jpg"
] | [
"208845/stls/2020 Cover.stl"
] | CC-BY | https://www.printables.com/model/208845 | data_0001.tar |
221529 | 2020 Aluminum Extrusion Drop In T-Nut | <p>Drop-in T-Nut for 2020 aluminum extrusion. You do not have to disassemble anything to install these. Simply turn it 90 degrees so it slides inside the channel. Then turn it 90 degress to the right (clockwise) and it locks into the slot allowing you to screw into it to mount accessories.</p><p>This design has an over... | [
"nut",
"extrusion",
"t",
"2020",
"in",
"drop",
"aluminum",
"tee"
] | 3D Printers > Accessories | [
"221529/images/image_1_compressed.jpg",
"221529/images/image_2_compressed.jpg"
] | [
"221529/stls/2020 extrusion drop in T-Nut.stl"
] | CC0 | https://www.printables.com/model/221529 | data_0001.tar |
505053 | 2020 aluminum profile 12mm linear rail alignment clip | 2020 aluminum profile 12mm linear rail alignment clip | Download free 3D printable STL models | [
"linearrail",
"linearmotion",
"linearslide"
] | 3D Printers > Other Printer Parts & Upgrades | [
"505053/images/image_1_compressed.jpg"
] | [
"505053/stls/2020_12mm_linear_rail_alignment_clip.stl"
] | CC0 | https://www.printables.com/model/505053 | data_0001.tar |
54744 | 2020 cable clips (T-slot & V-slot) | <p>Various cable clips for 2020 extrusions, for use with zip-ties. Fits both T-slot and V-slot.</p>
<p>If you are using V-slot extrusions, the original (V-slot only) ones these are based on could be more interesting:</p>
<ul>
<li><a href="https://github.com/gregsaun/prusa_i3_bear_upgrade/blob/master/printed_parts/commo... | [
"cable",
"clip",
"2020",
"tslot",
"aluminium",
"vslot"
] | 3D Printers > Accessories | [
"54744/images/image_1_compressed.jpg"
] | [
"54744/stls/cable_clip_horizontal.stl",
"54744/stls/cable_clip_lcd.stl",
"54744/stls/cable_clip_vertical.stl"
] | GPL3.0 | https://www.printables.com/model/54744 | data_0001.tar |
190503 | 2020 Cable Tie Holddown | <p>18x18mm square, 6mm thick.</p><p>Both slots are 2mm x 3.5mm.</p><p>Mounts using a M3x8 socket head cap screw.</p><p>I've included both .3mf and .f3d so you can modify it to work with different zipties, aluminum extrusions or other mounting options.</p><p><strong>PRINT SETTINGS</strong></p><p>No supports</p><p>0.2mm ... | [
"cable",
"2020",
"2020tslot",
"ziptie",
"cablemanagement",
"wire",
"cableholder",
"2020extrusion",
"wiremanagement",
"2020aluminum",
"2020mount",
"2020vslotextrusion",
"wireholder",
"cableguide",
"cableorganizer",
"ziptieanchor",
"ziptiemount"
] | 3D Printers > Accessories | [
"190503/images/image_1_compressed.jpg",
"190503/images/image_2_compressed.jpg"
] | [
"190503/stls/2020 Cable Tie Down.stl"
] | GPL3.0 | https://www.printables.com/model/190503 | data_0001.tar |
642540 | 2020 End Cap With Chamfer | Added a chamfer to the top edge | [] | 3D Printers > Accessories | [
"642540/images/image_1_compressed.jpg"
] | [
"642540/stls/2020Cap.stl"
] | CC-BY | https://www.printables.com/model/642540 | data_0001.tar |
71822 | 2020 Endcap | <p>Another endcap for 2020 extruded aluminum</p> | [
"2020extrusion"
] | 3D Printers > Accessories | [
"71822/images/image_1_compressed.jpg",
"71822/images/image_2_compressed.jpg"
] | [
"71822/stls/2020 Endcap.stl"
] | CC-BY | https://www.printables.com/model/71822 | data_0001.tar |
1074785 | 2020 Extrusion Cap | [] | 3D Printers > Other Printer Parts & Upgrades | [
"1074785/images/image_1_compressed.jpg",
"1074785/images/image_2_compressed.jpg"
] | [
"1074785/stls/Extrusion Cap V1.stl",
"1074785/stls/Extrusion Cap V2.stl"
] | CC-BY | https://www.printables.com/model/1074785 | data_0001.tar | |
621175 | 2020 extrusion channel cover | <p>Soft mesh cover that fits inside a 2020 extrusion channel to cover cables. When building my Voron 2.4, I had issues with extrusion covers for this purpose, as they protruded enough for the belts to rub on them. I used these to hide wiring for the lighting.</p><p>Print Settings (feel free to experiment): 2 outer wall... | [
"cablemanagement",
"extrusioncover"
] | 3D Printers > Voron Parts & Upgrades | [
"621175/images/image_1_compressed.jpg"
] | [
"621175/stls/2020_channel_cover.stl"
] | GPL3.0 | https://www.printables.com/model/621175 | data_0001.tar |
743221 | 2020 Extrusion Corner Bracket | <p>Model is printable either on the side, or on the long side. Print with 0.2 mm layers (it's best compromise between overhang printability and print strength).</p> | [
"bracket",
"2020",
"2020extrusion",
"2020mount"
] | 3D Printers > Accessories | [
"743221/images/image_1_compressed.jpg"
] | [
"743221/stls/2020 Corner Bracket.stl"
] | CC-BY | https://www.printables.com/model/743221 | data_0001.tar |
222024 | 2020 Extrusion Drop-In T-Nut for M3 Nut | <p>Drop-In T-Nut for 2020 aluminum extrusion utilizing an M3 nut for screw retention.</p><p>I used M3 nuts from this kit:</p><p>https://www.amazon.com/dp/B07KW2N9RD?psc=1&ref=ppx_yo2ov_dt_b_product_details</p><p> </p> | [
"nut",
"extrusion",
"t",
"ender",
"pro",
"3",
"2020",
"tnut",
"m3",
"aluminum"
] | 3D Printers > Accessories | [
"222024/images/image_1_compressed.jpg",
"222024/images/image_2_compressed.jpg"
] | [
"222024/stls/2020 extrusion drop in T-Nut for M3 Nut.stl"
] | CC0 | https://www.printables.com/model/222024 | data_0001.tar |
146913 | 2020 Extrusion End Cap |
<p>Quick and easy cap I designed since I couldn't find any caps that fit my extrusions without binding or requiring repeated use of a hammer to fit. I added measurements if you too want to make sure this design fits your profile.</p>
Category: 3D Printer Parts
| [
"extrusion",
"cap",
"2020",
"thingiverse",
"2020extrusion"
] | 3D Printers > Other Printer Parts & Upgrades | [
"146913/images/image_1_compressed.jpg",
"146913/images/image_2_compressed.jpg",
"146913/images/image_3_compressed.jpg",
"146913/images/image_4_compressed.jpg"
] | [
"146913/stls/2020Cap.stl"
] | CC-BY | https://www.printables.com/model/146913 | data_0001.tar |
277729 | 2020 extrusion M4 T-Nut adapter |
<p>Simple M4 T-nut adapter for 2020 Aluminum Extrusions as I didn't find anything that fit what I needed on Thingiverse.</p>
<p>I recommend printing with 100% infill and 5 side walls for strength since it's so small.</p>
Category: 3D Printer Parts
| [
"tnut",
"thingiverse",
"2020extrusion",
"m4tnut"
] | 3D Printers > Other Printer Parts & Upgrades | [
"277729/images/image_1_compressed.jpg",
"277729/images/image_2_compressed.jpg",
"277729/images/image_3_compressed.jpg",
"277729/images/image_4_compressed.jpg"
] | [
"277729/stls/m4_tnut.stl"
] | CC-BY | https://www.printables.com/model/277729 | data_0001.tar |
453917 | 2020 Extrusion profile cover (Nut 6) | <p>2020 Extrusion profile cover (Nut 6)</p>
<h3>Print Settings</h3>
<p><strong>Resolution:</strong></p>
<p>0,21</p>
Category: 3D Printer Accessories | [
"2020",
"thingiverse",
"2020extrusion",
"kossel2020",
"2020misumi"
] | 3D Printers > Accessories | [
"453917/images/image_1_compressed.jpg",
"453917/images/image_2_compressed.jpg",
"453917/images/image_3_compressed.jpg",
"453917/images/image_4_compressed.jpg",
"453917/images/image_5_compressed.jpg",
"453917/images/image_6_compressed.jpg",
"453917/images/image_7_compressed.jpg",
"453917/images/image_8... | [
"453917/stls/Nut_6_Abdeckung_-_10.stl",
"453917/stls/Nut_6_Abdeckung_-_100.stl",
"453917/stls/Nut_6_Abdeckung_-_150.stl",
"453917/stls/Nut_6_Abdeckung_-_20.stl",
"453917/stls/Nut_6_Abdeckung_-_200.stl",
"453917/stls/Nut_6_Abdeckung_-_50.stl"
] | CC-BY | https://www.printables.com/model/453917 | data_0001.tar |
189952 | 2020 Extrusion V-Slot Cover | <p>Could not find a model for 2020 extrusion slot cover so designed it.</p><ul><li>Optimized for 0.4 mm nozzle</li><li>Base layer height 0.2 mm</li><li>“Wings” to be printed with lower layer height to aid strength (0.7 mm and up set to 0.1 mm)</li><li>20 cm length to fit on most build platforms (diagonally)</li></ul> | [
"cover",
"vslot"
] | 3D Printers > Accessories | [
"189952/images/image_1_compressed.jpg",
"189952/images/image_2_compressed.jpg",
"189952/images/image_3_compressed.jpg",
"189952/images/image_4_compressed.jpg",
"189952/images/image_5_compressed.jpg"
] | [
"189952/stls/2020 Slot Cover.stl"
] | CC-BY | https://www.printables.com/model/189952 | data_0001.tar |
429123 | 2020 Handle for M5 screw | <p>Remixed the original to use M5 screws as that's what I have available. </p><p>I also added the 2020 profile notch so that it has a better fit and modified the screw holes to make it printable on its side (to also provide more strength to the handle). Correct orientation is flat side of screw hole up.</p><p>It w... | [
"handle",
"2020extrusion",
"prusabear",
"2020aluminum"
] | 3D Printers > Accessories | [
"429123/images/image_1_compressed.jpg",
"429123/images/image_2_compressed.jpg",
"429123/images/image_3_compressed.jpg",
"429123/images/image_4_compressed.jpg"
] | [
"429123/stls/2020Handle_M5.stl"
] | CC-BY | https://www.printables.com/model/429123 | data_0001.tar |
47017 | 2020 M3 T-Nut | <p>Resize of the piece by DrNeis. Original design would not fit standard M3 nut without pressing the nut in, which cracked it 100% of the time, or melting the nut into place with heat. This revision fits a standard M3 nut snugly without any glue or excessive force. Print vertically with supports for best accuracy.</p>
... | [
"thingiverse"
] | 3D Printers > Other Printer Parts & Upgrades | [
"47017/images/image_1_compressed.jpg"
] | [
"47017/stls/cr-10-t-nut_v1r2.stl"
] | CC-BY | https://www.printables.com/model/47017 | data_0001.tar |
94660 | 2020 Profile Corner Bracket | <p>Did not want to uselessly buy corner brackets, these ones are exceptionally strong (especially since they are printed with 4 walls).</p><p>I am using mine for my DIY 2020 system laser cutter. I have found that w/ 4 walls, these make a PERFECT replacement for metal brackets.</p><p>Printing these in PLAPro/PLA+ provid... | [
"2020",
"cornerbracket"
] | 3D Printers > Accessories | [
"94660/images/image_1_compressed.jpg"
] | [
"94660/stls/InsideCornerBracketLarge 1.1.stl",
"94660/stls/InsideCornerBracketMedium 1.1.stl",
"94660/stls/InsideCornerBracketMini 1.1.stl",
"94660/stls/InsideCornerBracketSmall 1.1.stl"
] | CC0 | https://www.printables.com/model/94660 | data_0001.tar |
145050 | 2020 Spool Holder | <p>I designed this spool holder to hold a spool with 32mm inner diameter or bigger, and with 70mm width max.</p><p>I've been using it for a while and is stands perfectly.</p><p>You'll need 2 608ZZ ball bearings (8x22x7mm) that you can get <a href="https://bit.ly/3vyQw5j">here at Aliexpress</a></p><p>Try to print the ho... | [
"spoolholder",
"filamentspoolholder",
"creality",
"crealitycr10",
"thingiverse",
"2020extrusion",
"aluminumextrusion",
"aluminiumprofile",
"crealitycr10s"
] | 3D Printers > Other Printer Parts & Upgrades | [
"145050/images/image_1_compressed.jpg",
"145050/images/image_2_compressed.jpg",
"145050/images/image_3_compressed.jpg",
"145050/images/image_4_compressed.jpg",
"145050/images/image_5_compressed.jpg",
"145050/images/image_6_compressed.jpg",
"145050/images/image_7_compressed.jpg"
] | [
"145050/stls/Cilinder_v1.0.stl",
"145050/stls/Holder_v1.0.stl",
"145050/stls/Link_v1.0.stl"
] | CC-BY | https://www.printables.com/model/145050 | data_0001.tar |
629738 | 2020 t-type nut 6 extrusion cap | <p>2020 t-type nut 6 extrusion cap</p> | [
"2020",
"2020tslot",
"2020extrusion"
] | 3D Printers > Other Printer Parts & Upgrades | [
"629738/images/image_1_compressed.jpg"
] | [
"629738/stls/2020 extrusion cap.stl"
] | CC-BY | https://www.printables.com/model/629738 | data_0001.tar |
22544 | 2020 Tesla Roadster | <p>This is a high poly replica of the upcoming 2020 Tesla Roadster. It was modeled in Blender over 25 hours. Any feedback would be appreciated!</p>
<p>UPDATE 2: The front and rear logo are now available attached to the body or separate. The front logo should print fine, but you will need a 0.2 mm nozzle or thin walls e... | [
"car",
"2020",
"tesla",
"thingiverse",
"electriccar",
"teslaroadster",
"teslaroadster2"
] | Art & Design > Other Art & Designs | [
"22544/images/image_1_compressed.jpg",
"22544/images/image_10_compressed.jpg",
"22544/images/image_11_compressed.jpg",
"22544/images/image_12_compressed.jpg",
"22544/images/image_2_compressed.jpg",
"22544/images/image_3_compressed.jpg",
"22544/images/image_4_compressed.jpg",
"22544/images/image_5_comp... | [
"22544/stls/body-front-logo.stl",
"22544/stls/body-front.stl",
"22544/stls/body-full-logo02mm-nozzle.stl",
"22544/stls/body-full.stl",
"22544/stls/body-rear-logo02mm-nozzle.stl",
"22544/stls/body-rear.stl",
"22544/stls/brake-front.stl",
"22544/stls/brake-rear.stl",
"22544/stls/brake-rotor-front.stl"... | CC-BY | https://www.printables.com/model/22544 | data_0001.tar |
114262 | 2020 v-slot extrusion cable-clip (square) for Ender-5 and other. |
<p>Cable management. Second most important thing in the world. Maybe even first.</p>
<p>Anyways,</p>
<p>this little remix allowed me to clip the big bundle of cables to my Ender 5 frame.</p>
<p>Nice and neat :)</p>
<p>Update 16 jun '19</p>
<p>Noticed a small artefact on the side of the clip, didn't hurt it, but di... | [
"tevo",
"cablemanagement",
"ender3",
"thingiverse",
"2020extrusion",
"cableclip",
"vslot",
"ender5",
"ender3pro",
"ender5plus",
"vslotmount"
] | 3D Printers > Creality Parts & Upgrades | [
"114262/images/image_1_compressed.jpg",
"114262/images/image_2_compressed.jpg",
"114262/images/image_3_compressed.jpg"
] | [
"114262/stls/2020_V-Slot_square_cable_holder_-_EXPERIMENTAL_-_rotated_90deg.stl",
"114262/stls/2020_V-Slot_square_cable_holder_-_EXPERIMENTAL_-_rotated_90deg_with_support_material.stl",
"114262/stls/2020_V-Slot_square_cable_holder_-_v2.stl"
] | CC-BY | https://www.printables.com/model/114262 | data_0001.tar |
312162 | 2020. 2020-R, 2040, 3030, 3060 Aluminum Extrusions | <p>Not necessarily to be printed, but used when designing projects in CAD. STL, OBJ, F3D and STEP files included.</p><p>New 2020-R Extrusion!</p><p>Please don't forget to like the model if you find it useful. Thanks!</p> | [
"3030extrusion",
"step",
"2020extrusion",
"aluminumextrusion",
"f3d",
"stepfile",
"2040extrusion",
"3060extrusion",
"2020rextrusion",
"2020r"
] | Hobby & Makers > Mechanical Parts | [
"312162/images/image_1_compressed.jpg",
"312162/images/image_2_compressed.jpg",
"312162/images/image_3_compressed.jpg"
] | [
"312162/stls/2020 Extrusion.stl",
"312162/stls/2020-R Extrusion.stl",
"312162/stls/2040 Extrusion.stl",
"312162/stls/3030 Extrusion.stl",
"312162/stls/3060 Extrusion.stl",
"312162/stls/Extrusion Profiles (v7~recovered).stl"
] | CC0 | https://www.printables.com/model/312162 | data_0001.tar |
30734 | 2020/2040 Extrusion Cover / Cable Channel | <p>perfect fit for 2020/2040 Extrusion (Openbuild/Ratrig) BearFrame Cover / Cable Channel.</p>
<p>haven't found any that would actually fit snug, so i made one myself.<br/>
it fits perfectly, is flush to the surface and has about 3mm room behind it to route any cables along the extrusion. just insert it, you have to pr... | [
"cable",
"extrusion",
"cover",
"2020",
"2040",
"kabelkanal",
"channel",
"cablechannel"
] | 3D Printers > Accessories | [
"30734/images/image_1_compressed.jpg",
"30734/images/image_2_compressed.jpg",
"30734/images/image_3_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/30734 | data_0001.tar |
189960 | 2021 Subaru Forester Water Bottle Cup Holder | <p>This is a cup holder insert for a 2021 Subaru Forester (and possibly other Subraru models too) that will fit a 32/40 oz hydroflask water bottle (or other similarly sized 91mm diameter water bottle) without blocking the other cup holder. The inner hole fits a standard 12 oz can or 16 oz soda bottle, up to a 73 mm dia... | [
"subaru",
"waterbottle",
"cupholder",
"hydroflask",
"thingiverse",
"forester",
"subaruforester"
] | Hobby & Makers > Automotive | [
"189960/images/image_1_compressed.jpg",
"189960/images/image_2_compressed.jpg",
"189960/images/image_3_compressed.jpg",
"189960/images/image_4_compressed.jpg",
"189960/images/image_5_compressed.jpg",
"189960/images/image_6_compressed.jpg",
"189960/images/image_7_compressed.jpg",
"189960/images/image_8... | [
"189960/stls/Cupholder - Boot L.stl",
"189960/stls/Cupholder - Boot R.stl",
"189960/stls/Cupholder_Left.stl",
"189960/stls/Cupholder_Right.stl"
] | CC-BY | https://www.printables.com/model/189960 | data_0001.tar |
128835 | 2022 Olympic Medal | <p>I quick recreation of the 2022 Winter Olympic Medal to print for my kids while we watch the games</p> | [
"olympic",
"medal",
"2022"
] | Costumes & Accessories > Other Costume Accessories | [
"128835/images/image_1_compressed.jpg",
"128835/images/image_2_compressed.jpg"
] | [
"128835/stls/2022 Olympic Medal.stl"
] | CC0 | https://www.printables.com/model/128835 | data_0001.tar |
336708 | 2023 New Year Eve Glasses | <p>The designer on Thingivers https://www.thingiverse.com/3dimka/designs</p><p>2025 Glasses her https://www.thingiverse.com/thing:6878515</p><p>Easy to assemble 2023 glasses.</p><p>For children scale it with 90%.</p><p>For New Year Eve, graduation party, wedding, Mardi Gras, birthday party, etc.</p><p>The temples go in... | [
"newyear",
"glasses",
"2023"
] | Seasonal designs > Winter & Christmas & New Year's | [
"336708/images/image_1_compressed.jpg"
] | [
"336708/stls/Frame.stl",
"336708/stls/temples.stl",
"336708/stls/text.stl",
"336708/stls/text_loose_fit.stl"
] | CC0 | https://www.printables.com/model/336708 | data_0001.tar |
301555 | 2023 New Year Glasses version 0 | <p>Glasses for helping you celebrate the new year (2023). Print flat with no supports.</p> | [] | Costumes & Accessories > Other Costume Accessories | [
"301555/images/image_1_compressed.jpg"
] | [
"301555/stls/2023Glasses.stl",
"301555/stls/2023LeftArm.stl",
"301555/stls/2023RightArm.stl"
] | CC0 | https://www.printables.com/model/301555 | data_0001.tar |
698060 | 2024 headband | <p>The height is 3 mm only, so it will print fast.</p><p>I recommend using PETG, as it's flexible. PLA might be too brittle.</p><p>Pro tip: use translucent PETG and choose some fun infill pattern!</p> | [
"party",
"newyear",
"tiara",
"headband",
"2024"
] | Fashion > Other Fashion Accessories | [
"698060/images/image_1_compressed.jpg"
] | [
"698060/stls/2024_headband.stl"
] | CC-BY | https://www.printables.com/model/698060 | data_0001.tar |
644360 | 2024 New Year's glasses | <p>Glasses that you can bring to spice up any New Year's party. Note I only have a model for the left side arm, mirror it in the slicer to create the right side arm. I usually print the arms standing up on the top edge using a small amount of support for the top shelf. They can be printed on the larger flat side with n... | [
"newyear",
"glasses",
"2024"
] | Seasonal designs > Winter & Christmas & New Year's | [
"644360/images/image_1_compressed.jpg",
"644360/images/image_2_compressed.jpg",
"644360/images/image_3_compressed.jpg",
"644360/images/image_4_compressed.jpg",
"644360/images/image_5_compressed.jpg"
] | [
"644360/stls/2024 shades V1.1.stl",
"644360/stls/shade arms V 12.2 x 7.8.stl"
] | CC0 | https://www.printables.com/model/644360 | data_0001.tar |
1125586 | 2025 glasses | <p>These are simple glasses for your party.</p><p>You can scale the glasses up or down to your size.</p><p>Just use two small pieces of filament for assembling and melt the ends carefully.</p><p>Happy new year.</p> | [
"2025",
"glasses"
] | Costumes & Accessories > Other Costume Accessories | [
"1125586/images/image_1_compressed.jpg",
"1125586/images/image_2_compressed.jpg"
] | [
"1125586/stls/Brille.stl",
"1125586/stls/Buegel_L.stl",
"1125586/stls/Buegel_R.stl"
] | CC-BY | https://www.printables.com/model/1125586 | data_0001.tar |
1075603 | 2026 Headband – Festive 3D Hair Accessory for the New Year | <p>Ring in the New Year with this bold and stylish <strong>2026 headband</strong>! Designed to be lightweight, comfortable, and easy to print, this hair accessory is perfect for New Year’s Eve parties, events, or just showing off your excitement for the year ahead.</p><p> </p><p><strong>Key Features:</strong></p><... | [
"christmas",
"winter",
"xmas",
"2025",
"headband",
"xmasdecorations",
"happynewyear",
"hairband",
"xmasornament",
"2026",
"greetings",
"hairbow",
"happynewyear2025"
] | Seasonal designs > Winter & Christmas & New Year's | [
"1075603/images/image_1_compressed.jpg",
"1075603/images/image_2_compressed.jpg",
"1075603/images/image_3_compressed.jpg",
"1075603/images/image_4_compressed.jpg",
"1075603/images/image_5_compressed.jpg",
"1075603/images/image_6_compressed.jpg"
] | [
"1075603/stls/0 Happy New Year - Mirko Ferronato .stl",
"1075603/stls/2026 numbers - Head hair band Mirko Ferronato .stl",
"1075603/stls/2027 Head hair band Mirko Ferronato .stl",
"1075603/stls/2027.stl",
"1075603/stls/Happy 2025 Head hair band Mirko Ferronato .stl",
"1075603/stls/Happy 2025 new Year - ... | CC-BY | https://www.printables.com/model/1075603 | data_0001.tar |
353281 | 2026 New Year Glasses | <p>Print flat with supports. 0,15 or 0,2mm layer height. Use the “MM” files for multi material printing.</p> | [] | Fashion > Other Fashion Accessories | [
"353281/images/image_1_compressed.jpg",
"353281/images/image_10_compressed.jpg",
"353281/images/image_2_compressed.jpg",
"353281/images/image_3_compressed.jpg",
"353281/images/image_4_compressed.jpg",
"353281/images/image_5_compressed.jpg",
"353281/images/image_6_compressed.jpg",
"353281/images/image_... | [
"353281/stls/2023 glasses top MM P1.stl",
"353281/stls/2023 glasses top MM P2.stl",
"353281/stls/2023 glasses top.stl",
"353281/stls/2024 glasses top MM P1.stl",
"353281/stls/2024 glasses top MM P2.stl",
"353281/stls/2024 glasses top.stl",
"353281/stls/2025 glasses top MM P1 .stl",
"353281/stls/2025 g... | CC0 | https://www.printables.com/model/353281 | data_0001.tar |
224831 | 2040 MGN12 Alignment Tool | <p>Simple <strong>alignment tool</strong> to install <strong>MGN12</strong> rails on <strong>2040/4040</strong> extrusions.</p><p>Printed myself with <strong>PETG-CF</strong>, because I was lazy to change filament, but all other filaments should be fine.</p><p>.STEP-file included, if you want to edit the model.</p><p>I... | [
"2040",
"mgn12",
"alignment",
"alignmenttool",
"4040",
"2040extrusion",
"2040vslot",
"4040extrusion",
"mgn12alignment",
"4040profile",
"4040vslot",
"2040profile"
] | 3D Printers > Other Printer Parts & Upgrades | [
"224831/images/image_1_compressed.jpg",
"224831/images/image_2_compressed.jpg",
"224831/images/image_3_compressed.jpg"
] | [
"224831/stls/2040_MGN12_guide.stl"
] | GPL3.0 | https://www.printables.com/model/224831 | data_0001.tar |
70819 | 20mm headphone clamp | <p>Remix with shorter screw and narrower clamp, designed for 20mm desk thickness.</p> | [
"headphones"
] | Gadgets > Audio | [
"70819/images/image_1_compressed.jpg"
] | [
"70819/stls/Holder Modified-holder_bolt_v3.stl",
"70819/stls/Holder Modified-holder_v3.stl"
] | CC-BY | https://www.printables.com/model/70819 | data_0001.tar |
269706 | 20mm PVC pipe clip | <p>Wall mount clip for 20mm external diameter PVC pipes commonly used as a wire conduit</p><p><strong>Print:</strong></p><ul><li>No supports</li><li>Increase wall count (4) for increased rigidity</li></ul><p> </p><p><strong>Remix of "</strong><a href="https://www.thingiverse.com/thing:3350434"><strong>pipe clip M2... | [
"wallmount",
"conduit",
"electrical",
"pvcpipe",
"electricalwiring",
"wireconduit"
] | Hobby & Makers > Electronics | [
"269706/images/image_1_compressed.jpg",
"269706/images/image_2_compressed.jpg",
"269706/images/image_3_compressed.jpg"
] | [
"269706/stls/pipe_clip_M20.stl"
] | CC-BY | https://www.printables.com/model/269706 | data_0001.tar |
117155 | 20mm Test Cube | It＇s a 20mm Cube for calibration | Download free 3D printable STL models | [
"test",
"cube",
"calibrationcube",
"testcube"
] | 3D Printers > Test Models | [
"117155/images/image_1_compressed.jpg"
] | [
"117155/stls/20mm test cube.stl"
] | CC0 | https://www.printables.com/model/117155 | data_0001.tar |
120616 | 20oz Yeti Rambler Handle | <p>This handle was modelled after the official Yeti Rambler 20 oz Tumbler Handle from this link, <a href="https://www.sportchek.ca/product/yeti-rambler-20-oz-tumbler-handle-332396908.html">YETI Rambler 20 oz Tumbler Handle | Sport Chek</a>. It has a slightly loose fit so that users can add electrical tape to the inside... | [
"handle",
"yeti",
"yetihandle",
"rambler",
"yetirambler"
] | Household > Kitchen | [
"120616/images/image_1_compressed.jpg",
"120616/images/image_2_compressed.jpg"
] | [
"120616/stls/Yeti Rambler Handle 20oz.stl"
] | CC0 | https://www.printables.com/model/120616 | data_0001.tar |
845592 | 20th Century Fox logo | <p>The original was a faithful reproduction of the logo but was extremely impractical as a 3d printed object. My son is obsessed with 20th Century Fox so I wanted to print him a logo.<br><br>This should be easy to print, no supports necessary.</p> | [
"logo",
"nosupport",
"20thcenturyfox"
] | Art & Design > 2D Plates & Logos | [
"845592/images/image_1_compressed.jpg"
] | [
"845592/stls/20thcentruyfixed.stl"
] | CC-BY | https://www.printables.com/model/845592 | data_0001.tar |
402618 | 20x20 Aluminium Extrusion Corner Bracket | 60x60x20 corner bracket that will accept M3 screws. Prints flat without supports. | Download free 3D printable STL models | [] | 3D Printers > Other Printer Parts & Upgrades | [
"402618/images/image_1_compressed.jpg",
"402618/images/image_2_compressed.jpg",
"402618/images/image_3_compressed.jpg"
] | [
"402618/stls/60x60x20_M3_Bracket.stl"
] | CC-BY | https://www.printables.com/model/402618 | data_0001.tar |
550640 | 20x20 Extrusion corner bracet for M4 screws | <p>The <a href="https://www.printables.com/de/model/402618-20x20-aluminium-extrusion-corner-bracket">original model</a> 60x60x20, for M3 Screws, by <a href="https://www.printables.com/de/@bjripp">bjripp</a> is super good go check it out!</p><p>I just made the holes lager to fit M4 screws with a cylinder head.</p> | [
"extrusion",
"bracket",
"connector",
"corner",
"m4",
"m4screws",
"cornerbracket",
"extrusion20x20"
] | 3D Printers > Other Printer Parts & Upgrades | [
"550640/images/image_1_compressed.jpg"
] | [
"550640/stls/20x20 Axtrusion corner bracket for M4 screws.stl"
] | CC-BY | https://www.printables.com/model/550640 | data_0001.tar |
378906 | 20x20x20 Calibration XYZ Cube | <p>use this as your first test print to calibrate your printer</p> | [
"calibration",
"cube",
"xyz",
"testcube"
] | 3D Printers > Test Models | [
"378906/images/image_1_compressed.jpg"
] | [
"378906/stls/Calibration XYZ Cube.stl"
] | CC-BY | https://www.printables.com/model/378906 | data_0001.tar |
1334812 | 20x5x2 to 20x6x2 Magnet Adapter | <p>This is just a quick design I made in PrusaSlicer to adapt 20x5x2 mm magnets I had to slots made for 20x6x2 magnets.</p><p>This model is designed for <a target="_blank" rel="ugc" class="editor-link" href="https://www.amazon.com/dp/B0CPJ9LWFN?th=1">these 20x5x2 magnets</a> (actual dimensions closer to 18.9 x 4.6... | [] | Hobby & Makers > Other Ideas | [
"1334812/images/image_1_compressed.jpg",
"1334812/images/image_2_compressed.jpg"
] | [
"1334812/stls/Magnet Adapter 20x5x2 to 20x6x2.stl",
"1334812/stls/magnet-adapter-20x5x2-to-20x6x2.stl"
] | CC0 | https://www.printables.com/model/1334812 | data_0001.tar |
477926 | 21700 Battery Beer Crate | <p>Simple 21700 cell holder in the style of a beer crate.</p>
<p>Holds up to 12 cells.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>I3 MK3S</p></div>
<p><strong>Supports:</strong></p>
<p>Yes</p>
<p class="detail-sett... | [
"21700",
"thingiverse",
"21700cellholder",
"21700battery"
] | Hobby & Makers > Other Ideas | [
"477926/images/image_1_compressed.jpg",
"477926/images/image_2_compressed.jpg"
] | [
"477926/stls/21700_Beer_Crate.stl"
] | CC-BY | https://www.printables.com/model/477926 | data_0001.tar |
386322 | 21700 Battery Case | <p>Not much to it, I needed one quick, but could not find one that would fit my need so I made my own.</p><p>I've printed it with 0.3 mm layer height and 0.45 mm extrusion width. </p><h5>Disclamer</h5><p>I have no idea how safe it is, don't trust it - it's likely safer to carry a battery in this than loosely in a... | [
"21700",
"21700battery",
"21700holder"
] | Hobby & Makers > Electronics | [
"386322/images/image_1_compressed.jpg"
] | [
"386322/stls/21700_battery_case_bottom.stl",
"386322/stls/21700_battery_case_top.stl"
] | CC0 | https://www.printables.com/model/386322 | data_0001.tar |
950857 | 21700 Battery Case (variant B) | <p>Same as the <a href="https://www.printables.com/model/386322-21700-battery-case">original</a> I made a while back with a change to it's looks - this one is basted on a hexagon so should stack nicely if you need to store more of these. </p><p>You guys seemed to like the original so I made more variants. All are ... | [
"21700",
"21700battery",
"21700holder"
] | Hobby & Makers > Electronics | [
"950857/images/image_1_compressed.jpg"
] | [
"950857/stls/bestagon_Battery Case-21700_battery_case_bottom.stl",
"950857/stls/bestagon_Battery Case-21700_battery_case_top.stl"
] | CC0 | https://www.printables.com/model/950857 | data_0001.tar |
103383 | 22.5 degree MMU frame mount bracket | <p>My buffer sits above my printer and I didn't like how the tubes bent when using the original MMU2s frame mount. I tried a horizontal one but didn't like how the front tube had to bend with tall prints.</p><p>My solution was to remix the original Prusa bracket to be half way between them at 22.5 degrees.  ... | [
"prusa",
"mmu2s",
"mmu2",
"mmu2sbracket"
] | 3D Printers > Prusa Parts & Upgrades | [
"103383/images/image_1_compressed.jpg",
"103383/images/image_2_compressed.jpg",
"103383/images/image_3_compressed.jpg"
] | [
"103383/stls/MMU2_22degree_mount-clean.v2.stl"
] | GPL2.0 | https://www.printables.com/model/103383 | data_0001.tar |
480874 | 221-415 WAGO Mount with Labels (REMIX) | <p>These are some WAGO 221-415 holders, which are just a remix of the WAGO holders in the Voron Github (<a href="https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/Electronics_Bay/wago_221-415_mount_3by5.stl">here</a>). </p><p><strong>Since these models are designed to work with electrical components (WAGO... | [
"wago",
"voron"
] | 3D Printers > Other Printer Parts & Upgrades | [
"480874/images/image_1_compressed.jpg",
"480874/images/image_2_compressed.jpg",
"480874/images/image_3_compressed.jpg",
"480874/images/image_4_compressed.jpg",
"480874/images/image_5_compressed.jpg"
] | [
"480874/stls/2x415WAGO_Label-8A.stl",
"480874/stls/3x415WAGO_Label-8A.stl",
"480874/stls/415WAGO_Label-Frame_8A.stl",
"480874/stls/4x415WAGO_Label-8A.stl",
"480874/stls/VORON_413_WAGO_Label-frames_BLANK.stl",
"480874/stls/VORON_415_WAGO_Label-frames.stl",
"480874/stls/VORON_415_WAGO_Label-frames_BLANK.s... | GPL2.0 | https://www.printables.com/model/480874 | data_0001.tar |
217264 | 2230/2242/2260 to 2280 m.2 adapter ssd | <p>Please leave a like if you enjoyed the model or it helped you. :)<br><br>Remixed from : <a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://www.thingiverse.com/thing:4715615">https://www.thingiverse.com/thing:4715615</a><br><br>Started off by making it a bit easier to print by add... | [
"2",
"adapter",
"drive",
"ssd",
"dot",
"m",
"pci",
"thingiverse",
"adapt",
"pcie",
"nvme",
"m2",
"convert",
"nvmessd",
"2230",
"2280",
"2260",
"mdot2",
"2242",
"coverter",
"2242ssd",
"2230ssd",
"2260sd"
] | Gadgets > Computers | [
"217264/images/image_1_compressed.jpg",
"217264/images/image_2_compressed.jpg"
] | [
"217264/stls/2230_to_2280-remix.stl",
"217264/stls/2242_to_2280.stl",
"217264/stls/2260_to_2280.stl",
"217264/stls/variable adapter.stl"
] | CC-BY | https://www.printables.com/model/217264 | data_0001.tar |
226003 | 223/5.56 |
<p>This is a scare and dimensionally correct print of a 223 cartridge.</p>
Category: 3D Printing
| [
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"226003/images/image_1_compressed.jpg",
"226003/images/image_2_compressed.jpg"
] | [
"226003/stls/223.stl"
] | CC-BY | https://www.printables.com/model/226003 | data_0001.tar |
622302 | 225 x 125 x 75mm Rugged Case with Handle | <p>This is a version of my earlier 225x125x75mm case, but this one has a carry handle.</p><p> </p><p>The corner bumpers and can be printed in rigid material like PLA, or in a flexible material like TPU. The gasket should be printed in TPU.</p><p> </p><p>Screws needed:</p><p>Hinges. 3ea m3x2... | [] | Household > Other House Equipment | [
"622302/images/image_1_compressed.jpg",
"622302/images/image_2_compressed.jpg"
] | [
"622302/stls/Case Bottom.stl",
"622302/stls/Case Lid.stl",
"622302/stls/Corner Bumper.stl",
"622302/stls/Handle Roller.stl",
"622302/stls/Handle Struts.stl",
"622302/stls/Latch.stl",
"622302/stls/TPU Gasket.stl"
] | CC-BY | https://www.printables.com/model/622302 | data_0001.tar |
151190 | 22LR Bullet Holder | <p><strong>UPDATE 03MAR24</strong> </p><p>I was asked to make a <a href="https://www.printables.com/model/791729-lapua-lid-for-my-22lr-bullet-box">Lapua lid, so I did.</a></p><p><strong>UPDATE 16NOV18</strong></p><p>I finally got around to adding custom lids for <a href="https://www.printables.com/model/151173-rem... | [
"thingiverse"
] | Sports & Outdoor > Other Sports | [
"151190/images/image_1_compressed.jpg",
"151190/images/image_10_compressed.jpg",
"151190/images/image_2_compressed.jpg",
"151190/images/image_3_compressed.jpg",
"151190/images/image_4_compressed.jpg",
"151190/images/image_5_compressed.jpg",
"151190/images/image_6_compressed.jpg",
"151190/images/image_... | [
"151190/stls/22LR_Ammo_Box.stl",
"151190/stls/22LR_Ammo_Box_Lid_002.stl",
"151190/stls/Bullet_Tray_002.stl"
] | CC-BY | https://www.printables.com/model/151190 | data_0001.tar |
186753 | 22mm Target Patch Dispenser | <p>Patch dispenser designed to accommodate 22mm square patches provided by Pistol New Zealand (PNZ) for IPSC targets. Features a check window and roll directional guide. Print flat side down.</p><p>Have printed once so far in PLA+, very strong and dispenses well. Might try it in PETG next.</p><p>U/W: <a href="https://p... | [
"ipsc",
"thingiverse",
"targetshooting"
] | Sports & Outdoor > Other Sports | [
"186753/images/image_1_compressed.jpg",
"186753/images/image_2_compressed.jpg",
"186753/images/image_3_compressed.jpg",
"186753/images/image_4_compressed.jpg",
"186753/images/image_5_compressed.jpg"
] | [
"186753/stls/Dispenser_Body_30mm.stl",
"186753/stls/Dispenser_Body_35mm.stl",
"186753/stls/Dispenser_Bushing_30mm.stl",
"186753/stls/Dispenser_Bushing_35mm.stl",
"186753/stls/Dispenser_Lid.stl"
] | CC-BY | https://www.printables.com/model/186753 | data_0001.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.