model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
98178 | 24 cartridge Nintendo Switch game case | <p>This switch cartridge holder is the result of refining several designs and concepts I've come up with. My goal was to have a convenient, portable game cartridge holder that was as compact as possible for as many cards as possible. I also wanted to have all the games easily visible before they are removed from their ... | [
"case",
"mario",
"nintendo",
"videogame",
"switch",
"games",
"zelda",
"supportless",
"nintendoswitch",
"supermario",
"nosupport",
"luigi",
"nosupports"
] | Gadgets > Video Games | [
"98178/images/image_1_compressed.jpg",
"98178/images/image_2_compressed.jpg",
"98178/images/image_3_compressed.jpg",
"98178/images/image_4_compressed.jpg",
"98178/images/image_5_compressed.jpg"
] | [
"98178/stls/Game Pack 24 asm.stl"
] | CC-BY | https://www.printables.com/model/98178 | data_0001.tar |
139034 | 25ml washing powder spoon | [
"spoon",
"measuring",
"measuringspoon"
] | Household > Other House Equipment | [
"139034/images/image_1_compressed.jpg"
] | [
"139034/stls/25ml_spoon.stl"
] | CC0 | https://www.printables.com/model/139034 | data_0001.tar | |
205690 | 25mm miniature base | <p>This simple base can be printed fairly quickly, although I recommend printing it solid, so there is no holes. I also recommend printing it with the top down, as the model is oriented, as to get the best results. </p><p>The base has a diameter of 25mm and is 3mm thick, although it can easily be scaled to make it... | [
"mini",
"miniature",
"minibase"
] | Tabletop Miniatures > Characters & Monsters | [
"205690/images/image_1_compressed.jpg"
] | [
"205690/stls/25mm base.stl"
] | CC0 | https://www.printables.com/model/205690 | data_0001.tar |
658612 | 25mm Push Stick | <p>I needed a narrow pushstick and found Joe's make. Since I have cut into my original DeWalt push stick, maybe more than once, I decided to resize this to 25mm.</p> | [] | Hobby & Makers > Tools | [
"658612/images/image_1_compressed.jpg",
"658612/images/image_2_compressed.jpg"
] | [
"658612/stls/25mm wide Pushstick for table saw.stl",
"658612/stls/25mm Wide Pushstick for Table Saw.stl"
] | CC-BY | https://www.printables.com/model/658612 | data_0001.tar |
348181 | 270 Clamping Hinges | <p><strong>Any questions? Hit me up on the Voron Discord!</strong> @Alexander Þór</p><p>This design is based on <a href="https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/chrisrgonzales/270_degree_hinge">chrisgonzales</a> already incredible 270 degree hinges. The main goal of this remix was to have the... | [
"drill",
"hinge",
"clamp",
"270",
"holes",
"clamping",
"voron",
"through",
"vhb"
] | 3D Printers > Other Printer Parts & Upgrades | [
"348181/images/image_1_compressed.jpg"
] | [
"348181/stls/face_plate_embossed_logo.stl",
"348181/stls/face_plate_no_logo.stl",
"348181/stls/face_plate_through_logo.stl",
"348181/stls/side_mount.stl",
"348181/stls/side_mount_with_brim.stl",
"348181/stls/[a]_clamp.stl"
] | GPL3.0 | https://www.printables.com/model/348181 | data_0001.tar |
292368 | 270° Hinge for Original Prusa Enclosure | <p>The hinge pins can also be removed from the area of an allen key.</p> | [
"prusa",
"enclosure",
"hinge",
"doorhinge",
"originalprusaenclosure"
] | 3D Printers > Accessories | [
"292368/images/image_1_compressed.jpg",
"292368/images/image_2_compressed.jpg",
"292368/images/image_3_compressed.jpg",
"292368/images/image_4_compressed.jpg"
] | [
"292368/stls/Door - Hinge - v5 - WH.stl",
"292368/stls/Door - Hinge - v5.stl",
"292368/stls/Door - Hinge - v5a - Hex.stl",
"292368/stls/Door - Hinge - v5a.stl",
"292368/stls/Door - Hinge - v6.stl",
"292368/stls/Enclosure - Hinge - v7 - WH.stl",
"292368/stls/Enclosure - Hinge - v7.stl"
] | GPL2.0 | https://www.printables.com/model/292368 | data_0001.tar |
811500 | 276 Human Low Poly People Pack (architectural model building assets) | <p>276 individually scanned low poly people, models are shared from multiple authors under the CC attribution license. For more info on individual licenses see Loïc Norgeots sketchfab page (original author link).<br><br>I split, rotated, and bottomcut all the models for printability,<br><br>Remember to use brim when pr... | [
"character",
"props",
"human",
"architecture",
"architectural",
"models",
"pack",
"people",
"assets"
] | Tabletop Miniatures > Props & Terrains | [
"811500/images/image_1_compressed.jpg",
"811500/images/image_2_compressed.jpg",
"811500/images/image_3_compressed.jpg",
"811500/images/image_4_compressed.jpg",
"811500/images/image_5_compressed.jpg",
"811500/images/image_6_compressed.jpg"
] | [
"811500/stls/lowpolypeople (1).stl",
"811500/stls/lowpolypeople (10).stl",
"811500/stls/lowpolypeople (100).stl",
"811500/stls/lowpolypeople (101).stl",
"811500/stls/lowpolypeople (102).stl",
"811500/stls/lowpolypeople (103).stl",
"811500/stls/lowpolypeople (104).stl",
"811500/stls/lowpolypeople (105)... | CC-BY | https://www.printables.com/model/811500 | data_0001.tar |
970894 | 2Blade Windmill. Mandala-Effect. 2-part wheels, new spinner, new body | <p>I redesigned and draw this Modell totally new in fusion360. The idea though is from </p><p>user Forenseil : <a href="https://www.printables.com/de/model/811540-low-friction-high-speed-optical-illusion-windturbi">https://www.printables.com/de/model/811540-low-friction-high-speed-optical-illusion-windturbi</a></p... | [] | Household > Outdoor & Garden | [
"970894/images/image_1_compressed.jpg",
"970894/images/image_10_compressed.jpg",
"970894/images/image_11_compressed.jpg",
"970894/images/image_12_compressed.jpg",
"970894/images/image_2_compressed.jpg",
"970894/images/image_3_compressed.jpg",
"970894/images/image_4_compressed.jpg",
"970894/images/imag... | [
"970894/stls/Base.stl",
"970894/stls/fin.stl",
"970894/stls/joiner and spacer for 8mm threaded rod.stl",
"970894/stls/plug tail.stl",
"970894/stls/spacer body.stl",
"970894/stls/spacer middle back.stl",
"970894/stls/spacer middle front.stl",
"970894/stls/spinner.stl",
"970894/stls/tail.stl",
"9708... | CC-BY | https://www.printables.com/model/970894 | data_0001.tar |
453603 | 2D Butterfly | <p>this model is from Thingiverse and can be found here - <a href="https://www.thingiverse.com/thing:5650638">2D Butterfly 2</a> </p><p>This is a good model and has a lot of fine line detail. I was able to mold all of the very thin lines with no problems.</p> | [] | Art & Design > Wall-mounted | [
"453603/images/image_1_compressed.jpg",
"453603/images/image_2_compressed.jpg",
"453603/images/image_3_compressed.jpg",
"453603/images/image_4_compressed.jpg"
] | [
"453603/stls/2d_Butterfly_2.stl",
"453603/stls/An_2d_butterfly.stl"
] | CC-BY | https://www.printables.com/model/453603 | data_0001.tar |
326614 | 2D Iron Man Keychain | Iron man keychain. | Download free 3D printable STL models | [
"keychain",
"ironman",
"2d"
] | Art & Design > 2D Plates & Logos | [
"326614/images/image_1_compressed.jpg"
] | [
"326614/stls/iron man.stl"
] | CC-BY | https://www.printables.com/model/326614 | data_0001.tar |
1117802 | 2D Keychain – Bell | <p>This 2D bell outline keychain features a sleek and elegant design, making it a great accessory for holidays, celebrations, or everyday use. Its simple shape ensures quick and hassle-free printing, and it pairs beautifully with various filament colors.</p><ul><li><strong>Dimensions:</strong> 20,02 x 28,83 x 3,03 mm</... | [
"christmas",
"gift",
"pla",
"accessory",
"minimalist",
"keychain",
"2d",
"nosupport",
"easyprint",
"christmasdecoration",
"festive",
"holiday",
"bell",
"outline"
] | Art & Design > 2D Plates & Logos | [
"1117802/images/image_1_compressed.jpg",
"1117802/images/image_2_compressed.jpg",
"1117802/images/image_3_compressed.jpg",
"1117802/images/image_4_compressed.jpg",
"1117802/images/image_5_compressed.jpg",
"1117802/images/image_6_compressed.jpg",
"1117802/images/image_7_compressed.jpg"
] | [
"1117802/stls/bell keychain.stl"
] | CC0 | https://www.printables.com/model/1117802 | data_0001.tar |
1106839 | 2D Keychain – Car (Outline) | <p>A minimalist car outline keychain, perfect for car enthusiasts or as a stylish accessory. This simple design is easy to print and works well with various filament colors.</p><ul><li><strong>Dimensions:</strong> 44 x 32,8 x 3 mm</li><li><strong>Material:</strong> PLA is recommended for easy printing and durability.</... | [
"car",
"gift",
"pla",
"accessory",
"minimalist",
"keychain",
"2d",
"nosupportneeded",
"outline"
] | Art & Design > 2D Plates & Logos | [
"1106839/images/image_1_compressed.jpg",
"1106839/images/image_2_compressed.jpg",
"1106839/images/image_3_compressed.jpg"
] | [
"1106839/stls/car keychain.stl"
] | CC0 | https://www.printables.com/model/1106839 | data_0001.tar |
1109469 | 2D Keychain – Gift (Outline) | <p>This 2D gift outline keychain features a clean and simple design, resembling a wrapped present. It's ideal for anyone who loves unique accessories or for celebrating special occasions. The design is quick to print and works great with various filament colors.</p><ul><li><strong>Dimensions:</strong> 23,22 x 24,79 x 3... | [
"print",
"christmas",
"present",
"gift",
"pla",
"easy",
"accessory",
"minimalist",
"keychain",
"2d",
"2dart",
"nosupport",
"celebration",
"outline"
] | Art & Design > 2D Plates & Logos | [
"1109469/images/image_1_compressed.jpg",
"1109469/images/image_2_compressed.jpg",
"1109469/images/image_3_compressed.jpg",
"1109469/images/image_4_compressed.jpg",
"1109469/images/image_5_compressed.jpg",
"1109469/images/image_6_compressed.jpg"
] | [
"1109469/stls/Present keychain.stl"
] | CC0 | https://www.printables.com/model/1109469 | data_0001.tar |
1108008 | 2D Keychain – House | <p>This 2D house keychain features a filled design, making it a bold and charming accessory. It is simple to print and works well with a variety of filament colors, making it a versatile choice for personal use or gifting.</p><ul><li><strong>Dimensions:</strong> [Add dimensions, e.g., 50 x 40 x 3 mm]</li><li><strong>Ma... | [
"print",
"gift",
"architecture",
"pla",
"easy",
"accessory",
"minimalist",
"keychain",
"house",
"2d",
"nosupport",
"easyprint"
] | Art & Design > 2D Plates & Logos | [
"1108008/images/image_1_compressed.jpg",
"1108008/images/image_2_compressed.jpg",
"1108008/images/image_3_compressed.jpg",
"1108008/images/image_4_compressed.jpg"
] | [
"1108008/stls/house keychain.stl"
] | CC0 | https://www.printables.com/model/1108008 | data_0001.tar |
569557 | 2D Unicorn | <p>This model was printed with an X1C, with top ironing turned on. </p> | [
"cute",
"unicorn",
"girls"
] | Art & Design > 2D Plates & Logos | [
"569557/images/image_1_compressed.jpg"
] | [
"569557/stls/2d_Unicorn.stl"
] | CC0 | https://www.printables.com/model/569557 | data_0001.tar |
337276 | 2dBenchy Cookie Cutter | <p>We've all made plenty of 3d benchies but now we can get festive with our very own 2dBenchy cookies.</p><p>Cookies come out to roughly 3.5"x4" each, if you want bigger or smaller cookies scale accordingly.</p> | [
"benchy",
"cookiecutters"
] | Household > Kitchen | [
"337276/images/image_1_compressed.jpg"
] | [
"337276/stls/2dbenchy.stl"
] | CC-BY | https://www.printables.com/model/337276 | data_0001.tar |
355037 | 2in1 Mount for Worx / Pattfield 20V battery for IKEA Skadis System | <p>Halterung um einen 20V / 40V Akku von Worx oder Pattfield am IKEA Skadis System zu befestigen. Es werden zwei der Universal Hooks des hervorragenden Sets von CSD_Salzburg benötigt.<br>Die Universal Hooks sitzen bewusst sehr straff in der Halterung, sodass die Befestigung stabil ist.<br>Die Halterung kann auf zwei Ar... | [
"skadis",
"ikeaskadis",
"worx"
] | Household > Other House Equipment | [
"355037/images/image_1_compressed.jpg",
"355037/images/image_2_compressed.jpg",
"355037/images/image_3_compressed.jpg"
] | [
"355037/stls/Skadis_Universal_Hook.stl",
"355037/stls/worx_pattfield_akkuhalter_skadis.stl"
] | CC-BY | https://www.printables.com/model/355037 | data_0001.tar |
1489604 | 2kg Filament holder | <p>This adds 60 mm of length to hold the 2kg rolls. It holds amazingly and spins smoothly!</p> | [
"coreone",
"coreoneplus"
] | 3D Printers > Prusa Parts & Upgrades | [
"1489604/images/image_1_compressed.jpg",
"1489604/images/image_2_compressed.jpg",
"1489604/images/image_3_compressed.jpg"
] | [
"1489604/stls/Longer spool holder c1+ v1.stl"
] | GPL2.0 | https://www.printables.com/model/1489604 | data_0001.tar |
664992 | 2kg filament spool holder | <p>a 14.5 cm spool rail</p><p>original: <a href="https://www.printables.com/model/57214-mini-printable-parts">https://www.printables.com/model/57214-mini-printable-parts</a></p><p>you can find the other part under: files > Mini Spool Holder </p> | [
"spool",
"spoolholder"
] | 3D Printers > Prusa Parts & Upgrades | [
"664992/images/image_1_compressed.jpg",
"664992/images/image_2_compressed.jpg",
"664992/images/image_3_compressed.jpg",
"664992/images/image_4_compressed.jpg"
] | [
"664992/stls/Spool rail.stl"
] | GPL2.0 | https://www.printables.com/model/664992 | data_0001.tar |
870592 | 2kg MK4 spool holder stabilizer | When using 2kg rolls of filament, the original holder bends a little. This supporting leg helps the roll to stay completely horizontal, thus helping it unroll. There is a thread on the outside side of the support and a long pin connecting those two parts together. | [
"prusa",
"prusament",
"2kgspool",
"spoolholder",
"mk4"
] | 3D Printers > Prusa Parts & Upgrades | [
"870592/images/image_1_compressed.jpg",
"870592/images/image_2_compressed.jpg",
"870592/images/image_3_compressed.jpg",
"870592/images/image_4_compressed.jpg",
"870592/images/image_5_compressed.jpg"
] | [
"870592/stls/spoolHolder_screw.stl",
"870592/stls/spoolholder_stabilizer.stl"
] | GPL2.0 | https://www.printables.com/model/870592 | data_0001.tar |
1191094 | 2kg spol holder Prusa CORE one | <p>This is a spool holder designed for 2kg filament spools, created specifically for the Prusa Core One 3D printer. The design includes ball bearings for smoother filament unwinding and reduced resistance during printing.</p><p>There are two versions available:</p><ul><li><strong>Version 1:</strong> With a smooth rod (... | [
"2kg",
"spoolholder",
"2kgspoolholder",
"coreone"
] | 3D Printers > Prusa Parts & Upgrades | [
"1191094/images/image_1_compressed.jpg",
"1191094/images/image_2_compressed.jpg"
] | [
"1191094/stls/Body.stl",
"1191094/stls/insert smooth rod.stl",
"1191094/stls/insert without smooth rod.stl",
"1191094/stls/roller.stl",
"1191094/stls/top left.stl",
"1191094/stls/top right.stl"
] | CC0 | https://www.printables.com/model/1191094 | data_0001.tar |
432107 | 2KG spool holder | <p>This 2kg spool holder consists of two parts. The adapter screwed directly on the original spool holder can support your very initial projects, but long term its not enough. </p><p>The holder is there to support the adapter, enahnced by a little carving :-)</p><p>If you dont use the G-code files provided, make s... | [
"spool",
"holder",
"2kg"
] | 3D Printers > Other Printer Parts & Upgrades | [
"432107/images/image_1_compressed.jpg",
"432107/images/image_2_compressed.jpg",
"432107/images/image_3_compressed.jpg",
"432107/images/image_4_compressed.jpg",
"432107/images/image_5_compressed.jpg",
"432107/images/image_6_compressed.jpg"
] | [
"432107/stls/2KG_adapter.stl",
"432107/stls/holder_2.stl"
] | CC0 | https://www.printables.com/model/432107 | data_0001.tar |
543327 | 2kg Spool Holder Extender for Prusa Enclosure | <p>This model extends the injection molded part that comes with the Prusa Mk3 family of printers so that it can hold 2kg spools and remain compatible with the Prusa Enclosure.</p><h3>Printing</h3><h5>Orientation</h5><p>I recommend printing this vertically (as oriented in the file) since it doesn't need supports in this... | [
"prusa",
"prusament",
"enclosure",
"2kgspool",
"prusamentspool",
"enclosuremodification",
"2kgspoolholder"
] | 3D Printers > Creality Parts & Upgrades | [
"543327/images/image_1_compressed.jpg",
"543327/images/image_2_compressed.jpg",
"543327/images/image_3_compressed.jpg",
"543327/images/image_4_compressed.jpg",
"543327/images/image_5_compressed.jpg",
"543327/images/image_6_compressed.jpg",
"543327/images/image_7_compressed.jpg"
] | [
"543327/stls/Prusa Enclosure Spool Holder Extender for 2kg Spools.stl"
] | CC-BY | https://www.printables.com/model/543327 | data_0001.tar |
244784 | 2kg Spool holder extension | Extension of standard holder for recycled 2Kg spool. | Download free 3D printable STL models | [
"spoolholder"
] | 3D Printers > Other Printer Parts & Upgrades | [
"244784/images/image_1_compressed.jpg",
"244784/images/image_2_compressed.jpg",
"244784/images/image_3_compressed.jpg"
] | [
"244784/stls/Coil bracket extension.stl"
] | CC-BY | https://www.printables.com/model/244784 | data_0001.tar |
441545 | 2KG Spool Holder For Original Prusa Enclosure | <p>2KG spoolholder, remixed from the original 1KG spool holder. </p><p>It is required to remove one plastic rivet from the frame for one more screw that willl give extra support for the spool holder.</p><p>Mine is printed with 6 walls, 25% infill, 0.6mm nozzle, 0.4mm layerheight. </p><p>I have not tried but i... | [
"spoolholder",
"prusaenclosure"
] | 3D Printers > Accessories | [
"441545/images/image_1_compressed.jpg",
"441545/images/image_2_compressed.jpg",
"441545/images/image_3_compressed.jpg"
] | [
"441545/stls/2KG_SPOOLHOLDER_PRUSA_ENCLOSURE.stl"
] | CC0 | https://www.printables.com/model/441545 | data_0001.tar |
89779 | 2kg spool holder for Original Prusa MK3S+ | <p>Printable 2kg spool holder for Original Prusa MK3/S/S+. The spool holder was specially designed for Prusament 2kg, but it can be used for any spools.<br><br><strong>Warning: This spool holder is not compatible with Original Prusa MK4. There is a risk of collision between the extruder and filament holder.</strong><br... | [
"prusament",
"holder",
"filament",
"2kg",
"2kgspool",
"spoolholder",
"filamentspoolholder"
] | 3D Printers > Prusa Parts & Upgrades | [
"89779/images/image_1_compressed.jpg",
"89779/images/image_2_compressed.jpg"
] | [
"89779/stls/Prusament_SpoolHolder_2Kg.stl"
] | GPL2.0 | https://www.printables.com/model/89779 | data_0001.tar |
581339 | 2kg Spool holder for Original Prusa MK4 | <p>Printable 2kg spool holder for Original Prusa MK4. The spool holder was specially designed for Orignal Prusa MK4 and Prusament 2kg, but it can be used for any spools. </p>
<p>Perimeters: 2 and more, Infill: 30% rectilinear.</p> | [
"prusa",
"prusament",
"2kg",
"2kgspool",
"spoolholder",
"filamnet",
"2kgspoolholder"
] | 3D Printers > Prusa Parts & Upgrades | [
"581339/images/image_1_compressed.jpg"
] | [
"581339/stls/SpoolHolder-MK4-2kg-M8.stl"
] | GPL2.0 | https://www.printables.com/model/581339 | data_0001.tar |
1488991 | 2kg Spool Holder for Prusa Core One+ / interchangeable | <p>All I did is take what Prusa provided on Printables, and made it longer, that's all.<br><br>I've found that I lacked places to hold 2kg spools while working.<br>Now I don't.<br>If someone else find this useful, happy printing!<br><br>Don't throw short ,,blade'' - Short blade should be used for 1Kg spools.</p> | [] | 3D Printers > Prusa Parts & Upgrades | [
"1488991/images/image_1_compressed.jpg",
"1488991/images/image_2_compressed.jpg",
"1488991/images/image_3_compressed.jpg",
"1488991/images/image_4_compressed.jpg",
"1488991/images/image_5_compressed.jpg"
] | [
"1488991/stls/Prusa Core One + 2kg Spool holder.stl"
] | GPL2.0 | https://www.printables.com/model/1488991 | data_0001.tar |
673680 | 2Kg spoolholder for Prusa enclosure | <p>2Kg spoolholder for Prusa enclosure</p><p>We use original sides with rollers from Mini spool holder, but we use different piece to join them as a stand that is also mounting to Prusa enclosure. </p><p>Why:</p><p>I was looking for different ways ho to store additional spool and used Mini spool holder that was mo... | [
"prusa",
"enclosure",
"2kg",
"2kgspool",
"2kgspoolholder"
] | 3D Printers > Prusa Parts & Upgrades | [
"673680/images/image_1_compressed.jpg",
"673680/images/image_2_compressed.jpg"
] | [
"673680/stls/connecting-rail.stl",
"673680/stls/prusa enclosure 2kg roll mini spool holder.stl",
"673680/stls/Rail stand.stl"
] | GPL2.0 | https://www.printables.com/model/673680 | data_0001.tar |
565789 | 2mm wall Bambu Lab - Filament Poop Chute - X1, X1C and P1P, P1S | <p>With tree support and 0.2mm layer height:<br>Filament difference: 266.56g vs 294.25g<br>“Model printing time” difference : 4h42m vs 6h17m</p> | [
"poop",
"bambu",
"bambulab",
"poopchute"
] | 3D Printers > Bambu Lab Parts & Upgrades | [
"565789/images/image_1_compressed.jpg"
] | [
"565789/stls/Poop Chute_2mm wall.stl"
] | CC0 | https://www.printables.com/model/565789 | data_0001.tar |
917764 | 2X Half Dart Cutter | [] | Toys & Games > Other Toys & Games | [
"917764/images/image_1_compressed.jpg"
] | [
"917764/stls/HalfDartCutter_2X.stl"
] | CC0 | https://www.printables.com/model/917764 | data_0001.tar | |
243063 | 2X USB C Holder for MacBook So You Can Use Your Cheap Dumb Dock that Doesn't Work Correctly | <p>After using a few sub-$100 usb c docks with my MacBook Pro (M1), I could not for the life of me get them to work correctly. I always had to plug / unplug multiple times, etc to get my external monitor to display anything. </p><p>I don't wanna spend $400 on a legit dock, so lets turn two cables into one, and jus... | [
"usbc",
"macbook"
] | Gadgets > Computers | [
"243063/images/image_1_compressed.jpg",
"243063/images/image_2_compressed.jpg"
] | [
"243063/stls/usb2.stl"
] | CC0 | https://www.printables.com/model/243063 | data_0001.tar |
240329 | 2x2 Gridfinity Grid | <p>I wasn't able to find a 2x2 gridfinity base grid online. So now, you have it too. </p> | [
"gridfinity"
] | Hobby & Makers > Organizers | [
"240329/images/image_1_compressed.jpg"
] | [
"240329/stls/grid 2x2.stl"
] | CC0 | https://www.printables.com/model/240329 | data_0001.tar |
1512888 | 2x3 Gridfinity 6 Wire Spool Holder | <p>Simple Wire spool holder (Up to 60mm diameter spools) designed to be fully contained in a 2x3 gridfinity grid. Can hold up to 6 spools of wire.<br><br>Requires 7 M3x8mm screws. Print 2 shafts if you make this.<br><br></p> | [
"wire",
"wiremanagement",
"gridfinity",
"gridfinityholder"
] | Hobby & Makers > Organizers | [
"1512888/images/image_1_compressed.jpg",
"1512888/images/image_2_compressed.jpg"
] | [
"1512888/stls/Wire Holder - Base.stl",
"1512888/stls/Wire Holder - Left Bracket.stl",
"1512888/stls/Wire Holder - Right Bracket.stl",
"1512888/stls/Wire Holder - Shaft.stl"
] | CC0 | https://www.printables.com/model/1512888 | data_0001.tar |
152336 | 2x4 lego brick | a 2x4 lego brick made from the original 2x6high. | Download free 3D printable STL models | [
"lego",
"legocompatible",
"legobrick"
] | Toys & Games > Building Toys | [
"152336/images/image_1_compressed.jpg"
] | [
"152336/stls/2x4_high.stl"
] | CC0 | https://www.printables.com/model/152336 | data_0001.tar |
1271554 | 2" FPV Drone Frame | <p>Experimental monocoque 2" FPV Drone frame. This is a work in progress, I might remove outdated models inbetween.</p><p> </p><p>Current version features:</p><ul><li>top battery mount</li><li>very crash resistant, depending on material (recommended: ASA, PCCF, mechanically similar filaments)</li><li>space for 2 2... | [
"frame",
"drone",
"fpv",
"2inch",
"droneframe",
"walksnail"
] | Hobby & Makers > RC & Robotics | [
"1271554/images/image_1_compressed.jpg",
"1271554/images/image_2_compressed.jpg"
] | [
"1271554/stls/Frame v2 (HDZero compatible).stl",
"1271554/stls/Rubber Pads v2.stl"
] | GPL3.0 | https://www.printables.com/model/1271554 | data_0001.tar |
571044 | 3 different Prusa MK4 Z axis dust covers :) | <p>Hello everyone :)</p><p>There are already many different solutions to prevent dust or small plastic parts from falling into the hole in the Z-engine. <br>Unfortunately, none of them appealed to me so far, so I developed my own solution.<br>While my first design was being printed, I went to the gym and came up w... | [
"upgrade",
"prusa",
"motor",
"cover",
"stop",
"deckel",
"dust",
"z",
"improvement",
"zaxis",
"axis",
"motormount",
"update",
"mk4",
"dustcover",
"flat",
"schutz",
"staub",
"verbesserung"
] | 3D Printers > Prusa Parts & Upgrades | [
"571044/images/image_1_compressed.jpg",
"571044/images/image_10_compressed.jpg",
"571044/images/image_2_compressed.jpg",
"571044/images/image_3_compressed.jpg",
"571044/images/image_4_compressed.jpg",
"571044/images/image_5_compressed.jpg",
"571044/images/image_6_compressed.jpg",
"571044/images/image_... | [
"571044/stls/MK4 Dust Cover.stl",
"571044/stls/MK4_Dust_Clip.stl",
"571044/stls/MK4_Dust_Puzzle.stl"
] | GPL2.0 | https://www.printables.com/model/571044 | data_0001.tar |
684614 | 3 hole rope tensioner | <p>Made a 3 hole rope tensioner. Its used for taking up slack in rope such as in a pop up tent. Im not the designer of this part, but I just made it into a 3d printable part. Use as you like.</p><p> </p><h3>Print Settings</h3><p><strong>Resolution:</strong></p><p>your choosing.</p><p><strong>Infill: </strong>... | [
"cool",
"tensioner",
"makerbot",
"thingiverse",
"rope",
"newest"
] | Hobby & Makers > Other Ideas | [
"684614/images/image_1_compressed.jpg",
"684614/images/image_2_compressed.jpg"
] | [
"684614/stls/3_hole_rope_tensioner.stl"
] | CC-BY | https://www.printables.com/model/684614 | data_0001.tar |
19362 | 3 Hooks | <p>just 3/6 hooks from the original ready in one stl</p>
<h3>Print instructions</h3><h3>Category: Household Print Settings</h3>
<p><strong>Printer:</strong> Anet A8</p>
<p><strong>Rafts:</strong> No</p>
<p><strong>Supports:</strong> No</p>
<p><strong>Resolution:</strong> 0.2</p>
<p><strong>Infill:</strong> 35</p> | [
"hook",
"thingiverse",
"wallhook",
"hooks"
] | Household > Other House Equipment | [
"19362/images/image_1_compressed.jpg",
"19362/images/image_2_compressed.jpg"
] | [
"19362/stls/3hooks.stl"
] | CC-BY | https://www.printables.com/model/19362 | data_0001.tar |
288378 | 3 jarrones para adornar con filamentos otros colores | <p>Jarron con pared interior, para darle mayor fuerza , cojida idea de modelos parecidos , pero diseñado, modificado y convertidas formas y secciones. </p><p>Queda muy bonito </p> | [] | Art & Design > Other Art & Designs | [
"288378/images/image_1_compressed.jpg",
"288378/images/image_2_compressed.jpg",
"288378/images/image_3_compressed.jpg",
"288378/images/image_4_compressed.jpg",
"288378/images/image_5_compressed.jpg",
"288378/images/image_6_compressed.jpg",
"288378/images/image_7_compressed.jpg",
"288378/images/image_8... | [
"288378/stls/2057_Jarron alto mayor helice.stl",
"288378/stls/2057_jarron alto.stl",
"288378/stls/2057_jarron bajo.stl"
] | CC0 | https://www.printables.com/model/288378 | data_0001.tar |
567559 | 3 jaw chuck | <p>test 3 jaw chuck</p>
<p>this model possibly needed a bit of lime/file(ajustement)</p>
Category: Machine Tools | [
"thingiverse"
] | Hobby & Makers > Tools | [
"567559/images/image_1_compressed.jpg",
"567559/images/image_2_compressed.jpg",
"567559/images/image_3_compressed.jpg"
] | [
"567559/stls/face housing.stl",
"567559/stls/jaw1.stl",
"567559/stls/print p4.stl",
"567559/stls/print.stl",
"567559/stls/print_p4.stl",
"567559/stls/scroll.stl"
] | CC-BY | https://www.printables.com/model/567559 | data_0001.tar |
736051 | 3 Layer: Pac-Man Ghost piggy bank | <p>This remix of the Pac-Man Ghost piggy bank adds a third layer for the eye's pupils so they can be printed/colored on as a different color. Also, fixed a problem with the size of the face being too small to fit properly.</p>
Category: Other | [
"money",
"arcade",
"pacman",
"piggybank",
"thingiverse",
"pacmanghost",
"blinky"
] | Hobby & Makers > Other Ideas | [
"736051/images/image_1_compressed.jpg",
"736051/images/image_2_compressed.jpg",
"736051/images/image_3_compressed.jpg",
"736051/images/image_4_compressed.jpg"
] | [
"736051/stls/Ghost_Bank_Body.stl",
"736051/stls/Ghost_Bank_Face.stl",
"736051/stls/Ghost_Bank_Plug.stl"
] | CC-BY | https://www.printables.com/model/736051 | data_0001.tar |
74079 | 3 Low Poly Vases | <p>I tried to figure out how to manually build low poly objects in Fusion 360 in the last days.<br>Most likely there are better suited applications out there. <br>But well, at least it worked and I learned something. <br><br>Maybe someone out there is eagerly waiting for even more vase designs to print. </p><p>The... | [
"vase",
"lowpoly",
"vasemode",
"spiralvase",
"spiralvasemode"
] | Household > Home Decor | [
"74079/images/image_1_compressed.jpg"
] | [
"74079/stls/LowPolyVase.stl",
"74079/stls/LowPolyVaseThinBottom.stl",
"74079/stls/LowPolyVaseThinBottom_VaseMode.stl",
"74079/stls/LowPolyVaseThinTop.stl",
"74079/stls/LowPolyVaseThinTop_VaseMode.stl",
"74079/stls/LowPolyVase_VaseMode.stl"
] | CC-BY | https://www.printables.com/model/74079 | data_0001.tar |
367617 | 3 of Hearts - low poly heart, voronoi, smooth | <p><strong>Printing instructions</strong> for</p><p><strong>Voronoi: </strong>I recommend a 5mm Outer brim if you don't want surprises from the bottom of your heart. Make sure you're using dry filament if you have excessive stringing.</p><p><strong>Low Poly:</strong> Easiest make and scalability. You can print wi... | [
"valentines"
] | Art & Design > Sculptures | [
"367617/images/image_1_compressed.jpg"
] | [
"367617/stls/Heart_low_poly.stl",
"367617/stls/Heart_smooth.stl",
"367617/stls/Heart_voro.stl"
] | CC-BY | https://www.printables.com/model/367617 | data_0001.tar |
103816 | 3 pieces clothespin V2 (loundry pin - clothes peg) 100% printable | <p>Designed this on shapr3D on iPad.</p><p>I's a clothespin with a classic shape. No metal spring needed.</p><p>100% Printable.</p><p> </p><p>As requested I'm uploading a second version with a thicker body where you push it open with the fingers.</p><p> </p><p>Print instructions:</p><ul><li>Material: petg</li... | [
"clip",
"pin",
"spring",
"peg",
"clothespin",
"clothes",
"loundry"
] | Household > Bathroom | [
"103816/images/image_1_compressed.jpg",
"103816/images/image_2_compressed.jpg",
"103816/images/image_3_compressed.jpg"
] | [
"103816/stls/Pin Body V1 (thin).stl",
"103816/stls/Pin Body V2 (thick).stl",
"103816/stls/Pin Spring.stl"
] | CC-BY | https://www.printables.com/model/103816 | data_0001.tar |
513811 | 3 skulls xbox controller stand. | [] | Gadgets > Video Games | [
"513811/images/image_1_compressed.jpg",
"513811/images/image_2_compressed.jpg",
"513811/images/image_3_compressed.jpg"
] | [
"513811/stls/xbox skull stand.stl"
] | CC0 | https://www.printables.com/model/513811 | data_0001.tar | |
1492686 | 3 Story Cantilevered Birdhouse 2.0 | <p>Much improved version of my original 3 story birdhouse. As the original, it can also be made as 2 story (lower and upper parts only) or single story (upper parts with lower floor). I've created separate files for window and door trims so they can be printed in accent colors as well as added decorative gable trusses ... | [
"bird",
"house",
"aviary",
"outdoordecor"
] | Household > Outdoor & Garden | [
"1492686/images/image_1_compressed.jpg",
"1492686/images/image_2_compressed.jpg",
"1492686/images/image_3_compressed.jpg",
"1492686/images/image_4_compressed.jpg",
"1492686/images/image_5_compressed.jpg",
"1492686/images/image_6_compressed.jpg",
"1492686/images/image_7_compressed.jpg",
"1492686/images... | [
"1492686/stls/bottommiddleroofdormer.stl",
"1492686/stls/bottommiddleroofnotched.stl",
"1492686/stls/bottommiddleroofregular.stl",
"1492686/stls/dormergabletruss.stl",
"1492686/stls/dormerinsert.stl",
"1492686/stls/lowerback.stl",
"1492686/stls/LowerFloor.stl",
"1492686/stls/lowerfloorwithdrain.stl",
... | CC-BY | https://www.printables.com/model/1492686 | data_0001.tar |
150777 | 3 string ukulele-like instrument | <p>This version will not be updated anymore. If you want the most recent version, check version 4 out here: https://www.printables.com/model/343896-playable-3-string-ukulele-like-instrument-v4<br><br>I designed a new instrument that is meant to be easy to learn and you can play or tune it however you like. This will re... | [
"guitar",
"ukulele",
"string",
"nylon",
"instrument",
"musical",
"balalaika"
] | Hobby & Makers > Music | [
"150777/images/image_1_compressed.jpg",
"150777/images/image_2_compressed.jpg",
"150777/images/image_3_compressed.jpg",
"150777/images/image_4_compressed.jpg"
] | [
"150777/stls/3_string_instrument_body_model_b.stl",
"150777/stls/3_string_instrument_neck_fret.stl",
"150777/stls/diatonicneck.stl",
"150777/stls/fretless_neck_with_noteguide.stl",
"150777/stls/Model_C.stl",
"150777/stls/Model_G.stl",
"150777/stls/Model_H.stl",
"150777/stls/Model_M.stl",
"150777/stl... | CC-BY | https://www.printables.com/model/150777 | data_0001.tar |
308543 | 3 Tweezer Holder Honey Comb | Holds 3 tweezers | Download free 3D printable STL models | [] | 3D Printers > Accessories | [
"308543/images/image_1_compressed.jpg"
] | [
"308543/stls/3 tweezer holder.stl"
] | CC-BY | https://www.printables.com/model/308543 | data_0001.tar |
760903 | 3 Way Pipe Connector | <p>Designed to be printed on the corner for strength. OnShape link below.</p><p> </p><p><a href="https://cad.onshape.com/documents/bce179946388578b911cc1f3/w/e74519d24581cb3a6fe81ff3/e/f109f7e51c14d5efb4f7a8f3">3 Way Pipe Connector | Part Studio 1 (onshape.com)</a></p> | [
"pipe",
"rod",
"connector",
"dowel",
"3way"
] | Hobby & Makers > Other Ideas | [
"760903/images/image_1_compressed.jpg",
"760903/images/image_2_compressed.jpg"
] | [
"760903/stls/3 Way Pipe Connector.stl"
] | CC0 | https://www.printables.com/model/760903 | data_0001.tar |
382102 | 3 Way Train Track Junction - Brio | <p>Single sided since it can be rotated to fit any orientation. Easy to print. </p><p>Double sided version because it feels right that way. Print with supports/brim.</p> | [
"traintrack"
] | Toys & Games > Building Toys | [
"382102/images/image_1_compressed.jpg",
"382102/images/image_2_compressed.jpg",
"382102/images/image_3_compressed.jpg",
"382102/images/image_4_compressed.jpg"
] | [
"382102/stls/Double Sided - 2 female 1 male.stl",
"382102/stls/Double Sided - 2 male 1 female.stl",
"382102/stls/Original - 2 Female 1 Male.stl",
"382102/stls/Original - 2 Male 1 Female.stl"
] | CC-BY | https://www.printables.com/model/382102 | data_0001.tar |
276734 | 3 way trammel | <figure class="image"><img src="https://media.printables.com/media/prints/276734/rich_content/b4c47497-c42a-42b6-ae95-54bb58633df4/untitled-1.gif#%7B%22uuid%22%3A%226f7a73bc-55e7-4698-8a38-34063426d5d0%22%2C%22w%22%3A480%2C%22h%22%3A480%7D"></figure><p> </p><p>Parts:</p><ul><li>base</li><li>handle</li><li>stone x ... | [
"grinder",
"mechanism",
"archimedes",
"trammel",
"nothing"
] | Learning > Engineering | [
"276734/images/image_1_compressed.jpg"
] | [
"276734/stls/base.stl",
"276734/stls/handle.stl",
"276734/stls/pin.stl",
"276734/stls/stone.stl"
] | CC-BY | https://www.printables.com/model/276734 | data_0001.tar |
239927 | 3 x 2 Gridfinity Honeycomb shelf | <p>I'm a big fan of the #Gridfinity storage system that Zack Freedman put together, so modified the shelf with a 3x2 gridfinity weighted baseplate!</p> | [
"shelf",
"honeycombstoragewall",
"gridfinity"
] | Hobby & Makers > Organizers | [
"239927/images/image_1_compressed.jpg",
"239927/images/image_2_compressed.jpg",
"239927/images/image_3_compressed.jpg",
"239927/images/image_4_compressed.jpg"
] | [
"239927/stls/HoneyCombGridfinityShelf.stl"
] | CC0 | https://www.printables.com/model/239927 | data_0001.tar |
180860 | 3&5 (silicone) cartridge holders | <p>An holder to be glued to wall for well organized acrylic, silicon and glue cartridges</p> | [
"workshop"
] | Hobby & Makers > Organizers | [
"180860/images/image_1_compressed.jpg",
"180860/images/image_2_compressed.jpg"
] | [
"180860/stls/SiliconeCartridgeHolder3.stl",
"180860/stls/SiliconeCartridgeHolder5.stl",
"180860/stls/SiliconeCartridgeHolder5WHoles.stl"
] | GPL2.0 | https://www.printables.com/model/180860 | data_0001.tar |
30607 | 3-cup watering can | <p>Great for watering indoor plants.</p>
| [] | Household > Outdoor & Garden | [
"30607/images/image_1_compressed.jpg"
] | [
"30607/stls/watering_jug_v2.stl"
] | CC-BY | https://www.printables.com/model/30607 | data_0001.tar |
891845 | 3-Drawer Desk Organizer | <p>Optimize your workspace with this 3-drawer desk organizer. Designed to be simple and functional, it features :</p><ul><li>Three PLA drawers ideal (each measuring 11.4cm by 14.5cm with a depth of 5.6cm) for storing small office items, accessories, or supplies. </li><li>The outer box, also made of PLA, perfectly ... | [
"organizer",
"office",
"desk",
"home",
"drawers",
"3",
"deskorganizer",
"work",
"drawer",
"workspace",
"deskorganizers"
] | Household > Office | [
"891845/images/image_1_compressed.jpg"
] | [
"891845/stls/box.stl",
"891845/stls/drawer.stl",
"891845/stls/feet.stl"
] | CC-BY | https://www.printables.com/model/891845 | data_0001.tar |
1072390 | 3-in-1 Display Shelf - Minimal Filament Version | <p>Streamline your display setup with the 3-in-1 Display Shelf! Easy to print and assemble, just stick the pieces together!<br>Designed for filament conscious printing, this stand features three interchangeable shelf configurations, making it perfect for a variety of uses.</p><p> </p><p>The shelves are intercompat... | [
"hexagon",
"minimal",
"miniatures",
"displaystand",
"3in1",
"minimalfilament",
"minisdisplay"
] | Household > Other House Equipment | [
"1072390/images/image_1_compressed.jpg",
"1072390/images/image_2_compressed.jpg",
"1072390/images/image_3_compressed.jpg",
"1072390/images/image_4_compressed.jpg",
"1072390/images/image_5_compressed.jpg",
"1072390/images/image_6_compressed.jpg"
] | [
"1072390/stls/base-tighter-fit.stl",
"1072390/stls/base.stl",
"1072390/stls/display-stand.stl",
"1072390/stls/long-shelf-gridfinity.stl",
"1072390/stls/long-shelf-hexagon-cutout-v2.stl",
"1072390/stls/long-shelf-rugged.stl",
"1072390/stls/long-shelf-smooth.stl",
"1072390/stls/short-shelf-gridfinity.st... | CC-BY | https://www.printables.com/model/1072390 | data_0001.tar |
537010 | 3-Piece Under Desk Dual Laptop Mount | <p>3-Piece Under Desk Dual Laptop Mount.</p><p>Desk real estate is just as hot as the housing market. Every square inch is a valuable plot of space that could be used for books you'll never read, pens that kind of work, and whatever the contents of your pockets are. </p><p>So why waste that space with your bulky e... | [
"desk",
"mount",
"underdeskmount",
"laptopholders"
] | Household > Office | [
"537010/images/image_1_compressed.jpg",
"537010/images/image_2_compressed.jpg",
"537010/images/image_3_compressed.jpg"
] | [
"537010/stls/DualLaptopMount_Drop.stl",
"537010/stls/DualLaptopMount_NoDrop.stl"
] | CC-BY | https://www.printables.com/model/537010 | data_0001.tar |
510115 | 3.5" Floppy Disk | <ul><li>A faithful reproduction of a 3.5" floppy disk</li><li>SD and HD versions</li><li>Write protected</li><li>Perfect for nostalgia nerds</li><li>Ideal for material swatches</li><li>Great for filament remnants or samples</li><li>Print at 0.2mm layer height</li><li>5 top layers for a nice finish</li><li>10% infill</l... | [] | 3D Printers > Test Models | [
"510115/images/image_1_compressed.jpg",
"510115/images/image_2_compressed.jpg",
"510115/images/image_3_compressed.jpg"
] | [
"510115/stls/HD_Floppy_Disk_V03.stl",
"510115/stls/SD_Floppy_Disk_V03.stl"
] | CC-BY | https://www.printables.com/model/510115 | data_0001.tar |
40826 | 3.5" Generic HDD Caddy | <p>A generic hdd caddy for a 3.5" hard drive. The caddy uses 4 standartized pc case screws like <a href="https://www.aquatuning.co.uk/media/image/af/5b/d6/94577_1_600x600.jpg">https://www.aquatuning.co.uk/media/image/af/5b/d6/94577\_1\_600x600.jpg</a></p>
<p>You can find a generic 5bay cage here: <a href="https://www.t... | [
"enclosure",
"hdd",
"harddrive",
"caddy",
"sata",
"thingiverse",
"hddenclosure",
"harddrivebrackets",
"harddriveenclosure"
] | Gadgets > Computers | [
"40826/images/image_1_compressed.jpg",
"40826/images/image_2_compressed.jpg",
"40826/images/image_3_compressed.jpg",
"40826/images/image_4_compressed.jpg",
"40826/images/image_5_compressed.jpg",
"40826/images/image_6_compressed.jpg",
"40826/images/image_7_compressed.jpg",
"40826/images/image_8_compres... | [
"40826/stls/hdd_caddy.stl",
"40826/stls/hdd_caddy_airflow.stl"
] | CC-BY | https://www.printables.com/model/40826 | data_0001.tar |
190070 | 3.5" HDD Storage Holder 6x |
<p>Remix of the 2,5" version to fit regular 3,5" drives</p>
<p>Designed to get the maximum slots on one regular 200x200 printer.</p>
<p>This is for the regular sized drives, (26mm thickness) but the smaller ones fit just fine too.</p>
<h3>Print Settings</h3>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p class="detail-... | [
"thingiverse"
] | Gadgets > Computers | [
"190070/images/image_1_compressed.jpg",
"190070/images/image_2_compressed.jpg",
"190070/images/image_3_compressed.jpg"
] | [
"190070/stls/35_hdd_6x.stl"
] | CC-BY | https://www.printables.com/model/190070 | data_0001.tar |
207442 | 3.5" HDD STORAGE HOLDER 6x (SEAGATE REMIX) | <p>I remixed the original stl file for a better fit for my Seagate HDDs.<br>Just shortened the model a bit on the Y-axis.</p><p> </p><p>Enjoy!</p> | [
"box",
"computer",
"storage",
"storagebox",
"hdd",
"harddrive",
"pc"
] | Gadgets > Computers | [
"207442/images/image_1_compressed.jpg",
"207442/images/image_2_compressed.jpg"
] | [
"207442/stls/3.5 SEAGATE.stl"
] | CC0 | https://www.printables.com/model/207442 | data_0001.tar |
115717 | 3018 CNC workpiece clamp | <p>This is a workpiece clamp for the 3018 CNC engraver. <br>It can easily be used for small or medium height objects</p> | [
"cnc",
"3018",
"cnc3018"
] | Hobby & Makers > Tools | [
"115717/images/image_1_compressed.jpg",
"115717/images/image_2_compressed.jpg",
"115717/images/image_3_compressed.jpg"
] | [
"115717/stls/clamp-part1.stl",
"115717/stls/clamp-part2.stl",
"115717/stls/work-hold-down-clamp.stl",
"115717/stls/work-hold-down-clamp_v4 v2.stl"
] | CC0 | https://www.printables.com/model/115717 | data_0001.tar |
770611 | 3030 Cable Clip (Profile Cover) | Clip für 30x30 Aluminiumproprofil zum befestigen von Kabeln etc. | Download free 3D printable STL models | [
"clips"
] | 3D Printers > Accessories | [
"770611/images/image_1_compressed.jpg"
] | [
"770611/stls/Clip 30x30.stl"
] | CC0 | https://www.printables.com/model/770611 | data_0001.tar |
138407 | 3030 Extrusion |
<p>10mm pieces of 3030, based on Misumi's extrusions with some different hole layouts. I don't think infill or walls particularly matter because the thin parts will stay as they are.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Monoprice</p>
<p class="detail-setting printer"><strong>Printer:... | [
"thingiverse"
] | 3D Printers > Other Printer Parts & Upgrades | [
"138407/images/image_1_compressed.jpg",
"138407/images/image_2_compressed.jpg",
"138407/images/image_3_compressed.jpg",
"138407/images/image_4_compressed.jpg",
"138407/images/image_5_compressed.jpg"
] | [
"138407/stls/GFS6-3030_10mm.stl",
"138407/stls/GFS6-3030_no-holes_10mm.stl",
"138407/stls/HFS6-3030_10mm.stl",
"138407/stls/HFS6-3030_square-corner-hole_10mm.stl",
"138407/stls/HFS6-3030_square-holes_10mm.stl"
] | CC-BY | https://www.printables.com/model/138407 | data_0001.tar |
203640 | 3030 Extrusion cable clip | <p>Created for Prusa MINI with <a href="https://www.printables.com/model/63483-prusa-mini-base">mini base</a> to clip X-Axis cable out of the way of the filament tube. </p> | [] | 3D Printers > Other Printer Parts & Upgrades | [
"203640/images/image_1_compressed.jpg",
"203640/images/image_2_compressed.jpg"
] | [
"203640/stls/Clip3030.stl"
] | CC0 | https://www.printables.com/model/203640 | data_0001.tar |
115797 | 3030 Extrusion jig | <p>I made this to be able to drill holes in the enter of 3030 extrusion a little easier. I should slide in to T slot pretty easy. I needs supports that are a pain in the ass, but check out the pic of how I put them in 3MF file will have them. I use Prusa Slicer. Enjoy.</p><p>youtube.com/ChrisRiley</p><p>And a bonus pic... | [
"extrusion",
"3030",
"drill",
"jib"
] | 3D Printers > Accessories | [
"115797/images/image_1_compressed.jpg",
"115797/images/image_2_compressed.jpg",
"115797/images/image_3_compressed.jpg",
"115797/images/image_4_compressed.jpg"
] | [
"115797/stls/3030 jig 2.stl"
] | CC0 | https://www.printables.com/model/115797 | data_0001.tar |
394518 | 3030 GoPro Mount | <p>This is a mount to attach a GoPro to 3030 extrusion. I use it on my Hevo to record with my GoPro Hero 8.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p><a href="http://amzn.to/2rqZ6Uo" rel="ugc nofollow" target="_bl... | [] | 3D Printers > Other Printer Parts & Upgrades | [
"394518/images/image_1_compressed.jpg",
"394518/images/image_2_compressed.jpg",
"394518/images/image_3_compressed.jpg",
"394518/images/image_4_compressed.jpg",
"394518/images/image_5_compressed.jpg"
] | [
"394518/stls/3030GoProMount.stl"
] | CC-BY | https://www.printables.com/model/394518 | data_0001.tar |
31262 | 3030 Raspberry Pi 3B+ mount (for Prusa i3 MK3s) | <p>Yes, this is yet another Raspberry Pi case. Does the world need another case? Probably not. I really liked the <a href="https://www.thingiverse.com/thing:2843889">3030-mounted case from Coopey</a> and thought the method of mounting via the 3030 extrusion slots was pretty sweet -- it was much better than I had ex... | [
"case",
"mk3s",
"raspberrypi",
"raspberrypicase",
"raspberrypi3"
] | 3D Printers > Accessories | [
"31262/images/image_1_compressed.jpg",
"31262/images/image_10_compressed.jpg",
"31262/images/image_2_compressed.jpg",
"31262/images/image_3_compressed.jpg",
"31262/images/image_4_compressed.jpg",
"31262/images/image_5_compressed.jpg",
"31262/images/image_6_compressed.jpg",
"31262/images/image_7_compre... | [
"31262/stls/3030-dropin-tee-m3.stl",
"31262/stls/raspi3b-mk3s-case-bottom.stl",
"31262/stls/raspi3b-mk3s-case-top-camera.stl",
"31262/stls/raspi3b-mk3s-case-top.stl"
] | CC-BY | https://www.printables.com/model/31262 | data_0001.tar |
231631 | 30min Coaster | <p>Fast Print Coaster<br>Uses only 1.6m filament (4.3g)</p><p>I am new to 3D Printing and 3D modeling and I find it hard to model patterns<br>Also custom patterns print very slowww<br>So after some time of thinking I came up with an idea on how to print different patterns that also print faster. That is to just print w... | [] | Household > Kitchen | [
"231631/images/image_1_compressed.jpg"
] | [
"231631/stls/30min coaster.stl"
] | CC0 | https://www.printables.com/model/231631 | data_0001.tar |
1115859 | 30ml scoop for detergent | <p>Laundry/kitchen detergent scoop. Holds 30ml. Has a nice sturdy handle and sharp corners for getting into corners.k</p> | [
"kitchen",
"scoop",
"laundry",
"detergent",
"30ml"
] | Household > Kitchen | [
"1115859/images/image_1_compressed.jpg"
] | [
"1115859/stls/Laundry Detergent Scoop.stl"
] | CC-BY | https://www.printables.com/model/1115859 | data_0001.tar |
640037 | 310mm Toroidal fan blade | <p>Don't forget to post a make and give this model a rating, I love seeing those!</p> | [
"blade",
"fan",
"toroidal",
"toroidalpropeller",
"toroidalprop",
"toroidalrotor"
] | Household > Other House Equipment | [
"640037/images/image_1_compressed.jpg"
] | [
"640037/stls/Toroidal 310mm 5b fan.stl"
] | CC0 | https://www.printables.com/model/640037 | data_0001.tar |
541773 | 32mm Intex/Bestway thru-pool hose adapter | <p>This goes through the filter hole in an Intex or Bestway above ground pool. Is made for 32mm hoses and uses the plastic clamps that come with the pool, but should fit snug as well. Used this to connect a hose from the pump to the skimmer I printed for a quick and durable connection. I would print it out ... | [
"adapter",
"pool",
"intex",
"hose",
"attachment",
"intexadapter",
"intexoutlet",
"intexpool"
] | Seasonal designs > Summer | [
"541773/images/image_1_compressed.jpg",
"541773/images/image_2_compressed.jpg"
] | [] | CC0 | https://www.printables.com/model/541773 | data_0001.tar |
298724 | 35mm 135-120 film adapter | <p>Adapter that allows you to load 35mm film into a medium format camera.</p><p>With this adapter you can take amazing panoramic photos and expose the full width of the film not just the frame between perforations.</p><p>If you print two you can add another film cartridge to the receiving spool and attach the film so t... | [
"adapter",
"fujifilm",
"photography",
"35mm",
"kodak",
"120film",
"filmphotography",
"mediumformat",
"35mmfilm"
] | Gadgets > Photo & Video | [
"298724/images/image_1_compressed.jpg",
"298724/images/image_2_compressed.jpg",
"298724/images/image_3_compressed.jpg"
] | [
"298724/stls/bottom.stl",
"298724/stls/top.stl"
] | BSD | https://www.printables.com/model/298724 | data_0001.tar |
150684 | 35mm DIN Rail Stand | <ul><li>I got the idea from this <a href="https://www.youtube.com/watch?v=x_K3h05tQXc&ab_channel=MakersMashup">video </a>which was inspired from this <a href="https://www.myminifactory.com/object/3d-print-din-rail-stand-xl-96231#_=_">DIN rail stand</a>. </li><li>Its a stand for DIN rail (35 mm) so you can eas... | [
"stand",
"test",
"automation",
"cabinet",
"rail",
"bench",
"organize",
"din",
"siemens",
"35mm",
"plc"
] | Hobby & Makers > Tools | [
"150684/images/image_1_compressed.jpg",
"150684/images/image_2_compressed.jpg"
] | [
"150684/stls/din stand.stl"
] | CC0 | https://www.printables.com/model/150684 | data_0001.tar |
584653 | 35mm Film Canister Replacement | <p>This is a 35mm Film Canister Replacement.</p><p>********************************************************************************</p><p><strong>ATTENTION</strong> </p><p>There is an STL File of the Canister that Works Better with TPU it is labeled:</p><p>( Film Canister FOR TPU CAP)</p><p><strong> *********... | [
"camera",
"case",
"cartridge",
"cap",
"replacement",
"tpu",
"pla",
"equipment",
"petg",
"tube",
"film",
"replacementpart",
"35mm",
"canister",
"storagecontainer",
"filmcamera",
"cameraequipment"
] | Gadgets > Photo & Video | [
"584653/images/image_1_compressed.jpg",
"584653/images/image_2_compressed.jpg",
"584653/images/image_3_compressed.jpg",
"584653/images/image_4_compressed.jpg",
"584653/images/image_5_compressed.jpg"
] | [
"584653/stls/Film Canister Cap.stl",
"584653/stls/Film Canister FOR TPU CAP.stl",
"584653/stls/Film Canister.stl"
] | CC-BY | https://www.printables.com/model/584653 | data_0001.tar |
466142 | 35mm Test Cube | <p>35mm Test Cube with tolerance test for 608 Bearing.</p><p> </p><p>Test overhangs, bridges, tolerances and ringing and small details.</p><p> </p><p>www.invicta3d.pt</p> | [
"test",
"cube"
] | 3D Printers > Test Models | [
"466142/images/image_1_compressed.jpg"
] | [
"466142/stls/test_cube_invicta3d_35mm.stl",
"466142/stls/test_cube_invicta3d_35mm_with_pins.stl"
] | CC0 | https://www.printables.com/model/466142 | data_0001.tar |
42924 | 36 Sharpie Holder | <p>Printed the 21 holder first, but it was not big enough, so re-mixed it to hold 35 :)</p>
<h3>Print instructions</h3><h3>Category: Art Tools Summary</h3>
<p>Printed the 21 holder first, but it was not big enough, so re-mixed it to hold 35 :)</p> | [
"thingiverse",
"sharpie",
"sharpieholder"
] | Hobby & Makers > Organizers | [
"42924/images/image_1_compressed.jpg",
"42924/images/image_2_compressed.jpg"
] | [
"42924/stls/35_sharpie_holder.stl"
] | CC-BY | https://www.printables.com/model/42924 | data_0001.tar |
567777 | 360 Deg Overhang Test/Challenge 60-70-80 | <p>If we scroll back to 2021, the consensus on Redit was that 80 degree overhangs were not even thinkable, but as things evolved, this is now totally possible.<br><br>This particular test evaluates cooling a bit further as in all the way around (360 degrees), the issue is that the ducts that are currently out there are... | [
"overhang",
"overhangtest",
"sprite",
"overhangs",
"taurus",
"overhangtorturetest",
"spritepro",
"ender3s1pro",
"spriteextruder",
"overhangcooling",
"sonicpad",
"overhang4directions"
] | 3D Printers > Other Printer Parts & Upgrades | [
"567777/images/image_1_compressed.jpg",
"567777/images/image_2_compressed.jpg",
"567777/images/image_3_compressed.jpg"
] | [
"567777/stls/360 Overhang Challenge 60-70-80 V5.stl"
] | CC0 | https://www.printables.com/model/567777 | data_0001.tar |
669477 | 37mm Camera lens cap | <p>Filament used: PETG-CF, PETG</p><p>0.2 layer</p><p>I couldn't find any front cap for 37mm so i made one. </p> | [] | Gadgets > Photo & Video | [
"669477/images/image_1_compressed.jpg",
"669477/images/image_2_compressed.jpg"
] | [
"669477/stls/camera lens cap mechanism.stl",
"669477/stls/camera lens cap top (2).stl",
"669477/stls/camera lens cap.stl"
] | CC-BY | https://www.printables.com/model/669477 | data_0001.tar |
1202179 | 3D alpaca benchy | <p>I thought of combining two icons in 3D printing and so the idea was born to combine an alpaca, which is the mascot animal of Prusa, with the very famous benchy boat.</p><p>Happy printing!</p> | [
"prusa",
"boat",
"test",
"animal",
"benchy",
"mascot",
"testmodel",
"alpaca"
] | 3D Printers > Test Models | [
"1202179/images/image_1_compressed.jpg",
"1202179/images/image_2_compressed.jpg",
"1202179/images/image_3_compressed.jpg"
] | [
"1202179/stls/3D alpaca benchy.stl"
] | CC-BY | https://www.printables.com/model/1202179 | data_0001.tar |
3161 | 3D BENCHY | <h3>Update: <a href="https://www.nti-group.com/home/information/news/3dbenchy/">The Iconic 3DBenchy Enters the Public Domain</a></h3><p><br><br>Author: CreativeTools</p><p>3DBenchy is a 3D model specifically designed for testing and benchmarking 3D printers. It is a small recognizable object that you can download for f... | [
"boat",
"test",
"benchy",
"testmodel"
] | 3D Printers > Test Models | [
"3161/images/image_1_compressed.jpg",
"3161/images/image_2_compressed.jpg"
] | [
"3161/stls/3dbenchy.stl"
] | CC0 | https://www.printables.com/model/3161 | data_0001.tar |
1263390 | 3D Benchy CAD/STEP file | <p>The CAD file of the original 3D Benchy was released for its 1O year anniversary, this is a reupload of it from Maker World.</p><p>https://makerworld.com/en/models/1272656-original-3dbenchy-public-domain-cad-step-file?from=search#profileId-1336828</p> | [
"test",
"benchy",
"torturetest",
"testprint",
"testmodel"
] | 3D Printers > Test Models | [
"1263390/images/image_1_compressed.jpg"
] | [] | CC0 | https://www.printables.com/model/1263390 | data_0001.tar |
741376 | 3d benchy display holder | 3d benchy holder | Download free 3D printable STL models | [] | Gadgets > Other Gadgets | [
"741376/images/image_1_compressed.jpg"
] | [
"741376/stls/3D Benchy Display - 4.stl"
] | CC0 | https://www.printables.com/model/741376 | data_0001.tar |
385827 | 3D Benchy Dry Dock Display Stand | <p>Added a free-stand base and side frames to four of those modules. Makes a nice display for available filaments and colors. The whole construction came out very stable, but to stay on the safe side I added a bunch of M6 nuts in the base to make it a bit weighty. </p> | [] | 3D Printers > Test Models | [
"385827/images/image_1_compressed.jpg",
"385827/images/image_2_compressed.jpg",
"385827/images/image_3_compressed.jpg",
"385827/images/image_4_compressed.jpg"
] | [
"385827/stls/BASE.stl",
"385827/stls/Frame Left.stl",
"385827/stls/Frame Right.stl",
"385827/stls/Module.stl"
] | CC-BY | https://www.printables.com/model/385827 | data_0001.tar |
1215713 | 3D Benchy Passthrough HQ | <h3><strong>Description</strong></h3><p>Recreation of the Benchy (remodelling to step) for making the helix spin & passthroug Benchy!</p><p><strong>Print Recommendations</strong></p><p>Supports: ON</p><h4><strong>Passthrough</strong></h4><p>The cabin can fully go through the main body. Chimney is slightly cut to al... | [
"multicolor",
"test",
"benchy",
"fidget",
"wave",
"helix",
"passthrough"
] | 3D Printers > Test Models | [
"1215713/images/image_1_compressed.jpg",
"1215713/images/image_2_compressed.jpg",
"1215713/images/image_3_compressed.jpg",
"1215713/images/image_4_compressed.jpg"
] | [
"1215713/stls/Benchy_helix_base.stl",
"1215713/stls/Benchy_passthrough_base.stl",
"1215713/stls/Cabin_full_chimney_helix_spin.stl",
"1215713/stls/cabin_passthorugh.stl"
] | CC0 | https://www.printables.com/model/1215713 | data_0001.tar |
48011 | 3D Benchy Wall Mount Display | <p>This is a simple wall-mounted display for an individual 3D Benchy boat in profile.</p>
<p>It will nicely fit a strip of 1" double-sided tape on the back to mount it to the wall.</p>
<p>It should print fine in the given orientation with no supports. Material and infill shouldn't matter too much; it's a pretty quick a... | [
"display",
"wall",
"mount",
"benchy",
"wallmount",
"3dbenchy",
"thingiverse",
"displaystand"
] | Art & Design > Wall-mounted | [
"48011/images/image_1_compressed.jpg",
"48011/images/image_2_compressed.jpg",
"48011/images/image_3_compressed.jpg"
] | [
"48011/stls/3dbenchy-mount-v1.stl"
] | CC-BY | https://www.printables.com/model/48011 | data_0001.tar |
806044 | 3d butterfly knife | <p>easy to print</p> | [
"butterfly",
"knife",
"balisong"
] | Gadgets > Other Gadgets | [
"806044/images/image_1_compressed.jpg",
"806044/images/image_2_compressed.jpg"
] | [
"806044/stls/Epic Turing.stl"
] | CC0 | https://www.printables.com/model/806044 | data_0001.tar |
792727 | 3D Chameleon Y pipe starting position tube keeper | <p>I made this clip to give you roughly a 25mm starting gap for you filament when using the 3D Chameleon. This is just easier to use to line up the filament instead of tape. I use PETG to print this because it's a little more flexible than PLA. It will snap on to the 4 input tubes.</p> | [
"clip",
"pipe",
"bowden",
"y",
"3dchameleon",
"ypipe"
] | 3D Printers > Accessories | [
"792727/images/image_1_compressed.jpg"
] | [
"792727/stls/Y pipe keeper2.stl"
] | CC0 | https://www.printables.com/model/792727 | data_0001.tar |
134 | 3D Fabric Experimentation | <p>I have begun to experiment with printing patterns over materials like tulle and organza, which will eventually be used for costumes and clothes. Here's a collection of patterns that I've designed, which will continue to be updated as I design more.</p>
<h3>Print instructions</h3><p>To print them on a fabric, print a... | [
"3d",
"fabric",
"print",
"tulle",
"costume"
] | Costumes & Accessories > Other Costume Accessories | [
"134/images/image_1_compressed.jpg",
"134/images/image_2_compressed.jpg"
] | [
"134/stls/hex_dip_mild.stl",
"134/stls/hex_dip_steep.stl",
"134/stls/hex_flat.stl",
"134/stls/hex_peaks.stl",
"134/stls/hex_peak_mild.stl",
"134/stls/hex_peak_steep.stl",
"134/stls/triangles.stl"
] | CC-BY | https://www.printables.com/model/134 | data_0001.tar |
129796 | 3D Gyroscope Keychain | <p>This is a simple little gyroscopic keychain I designed in Fusion 360 following the <a href="https://www.youtube.com/watch?v=n-T7CceCoXw">Product Design Online tutorial</a> as a guide. I took it a step further and set it up as a multi-color MMU print.</p> | [
"fidget",
"fidgettoy",
"keychain"
] | Toys & Games > Puzzles & Brain-teasers | [
"129796/images/image_1_compressed.jpg",
"129796/images/image_2_compressed.jpg",
"129796/images/image_3_compressed.jpg"
] | [
"129796/stls/Gyro Fidget Keychain v2.stl"
] | CC-BY | https://www.printables.com/model/129796 | data_0001.tar |
391826 | 3D Heart Jigsaw puzzle | <p>This is a 20 piece 3D heart jigsaw puzzle that was built as a Valentine's Day gift for that special someone, friend or, family member! The tolerances were checked and this model prints beautifully and requires no supports.</p><p>I will post images after my second one finishes! :D Happy printing!</p> | [
"puzzle",
"3dpuzzle",
"heart",
"hearts",
"valentinesday",
"valentinesdaygifts",
"jigsawpuzzle"
] | Toys & Games > Puzzles & Brain-teasers | [
"391826/images/image_1_compressed.jpg",
"391826/images/image_2_compressed.jpg"
] | [
"391826/stls/Heart Jigsaw Puzzle v2.stl"
] | CC0 | https://www.printables.com/model/391826 | data_0001.tar |
449822 | 3D Loga fotbalových klubů s podstavcem | <p>Pokud byste chtěli udělat logo na přání, napište do komentářů a já až budu mít čas, tak ho zde doplním. </p> | [
"sparta",
"2d",
"fotbal",
"sks",
"acs",
"slavia",
"plzen",
"slovacko"
] | Art & Design > 2D Plates & Logos | [
"449822/images/image_1_compressed.jpg",
"449822/images/image_2_compressed.jpg",
"449822/images/image_3_compressed.jpg",
"449822/images/image_4_compressed.jpg",
"449822/images/image_5_compressed.jpg",
"449822/images/image_6_compressed.jpg",
"449822/images/image_7_compressed.jpg",
"449822/images/image_8... | [
"449822/stls/ACS - bílá.stl",
"449822/stls/ACS - modrá, žlutá, červená.stl",
"449822/stls/ACS - základ.stl",
"449822/stls/BOH - zelená + bílá.stl",
"449822/stls/Držák 10cm.stl",
"449822/stls/Držák 12cm.stl",
"449822/stls/FCB - bílá + modrá.stl",
"449822/stls/FCB - modrá.stl",
"449822/stls/FCB - červ... | CC0 | https://www.printables.com/model/449822 | data_0001.tar |
554929 | 3D model náhradní vrtulky k elektromotoru do stavebnice Boffin 100 - 750 | <p>Pokud se vám stalo, že se vám v průběhu hraní si se stavebnicí Boffin 100, 300, 500 nebo 750 poškodila vrtulka nebo „kříž“, na který se vrtulka nasazuje, tak si můžete stáhnout přiložený model vrtulky, „kříže“ a můžete si je vytisknout nové. Ke klasické vrtulce je přiložen i model toroidní vrtulky, takže je můžete k... | [
"motor",
"elektro",
"boffin",
"vrtulka"
] | Toys & Games > Building Toys | [
"554929/images/image_1_compressed.jpg",
"554929/images/image_2_compressed.jpg",
"554929/images/image_3_compressed.jpg",
"554929/images/image_4_compressed.jpg",
"554929/images/image_5_compressed.jpg",
"554929/images/image_6_compressed.jpg",
"554929/images/image_7_compressed.jpg"
] | [
"554929/stls/kriz-k-vrtulkam.stl",
"554929/stls/toroidni-vrtulka.stl",
"554929/stls/vrtulka-boffin.stl",
"554929/stls/vrtulka-v2025.stl"
] | CC-BY | https://www.printables.com/model/554929 | data_0001.tar |
907711 | 3D Multi Angle Measuring Ruler 45/90 Degree, Carpentry Square Protractor Drawing Line Ruler Miter Triangle Layout Tool | <p>Sometimes all you need is a 45/90 degree tool for tracing and cutting. It is a 2 piece tool that is a must-have in any Carpenter toolbox. <br>You can use them combined and it is good to join wood planks at 90 degrees or to trace lines tracing using the edge of the board as a guide. <br><br>It is an easy an... | [] | Hobby & Makers > Tools | [
"907711/images/image_1_compressed.jpg",
"907711/images/image_2_compressed.jpg",
"907711/images/image_3_compressed.jpg",
"907711/images/image_4_compressed.jpg",
"907711/images/image_5_compressed.jpg",
"907711/images/image_6_compressed.jpg",
"907711/images/image_7_compressed.jpg",
"907711/images/image_8... | [
"907711/stls/BODY 1.stl",
"907711/stls/BODY 2.stl",
"907711/stls/SET.stl"
] | CC0 | https://www.printables.com/model/907711 | data_0001.tar |
174158 | 3D Print Room Sign | <p>This is a creation that I made for my printer room. It is three dimensional and looks great on a door or wall. Hopefully you will like it and post your version or remix of the sign. I would love to see them!</p> | [
"3d",
"sign",
"gcode",
"sprocket",
"multicolors3dprint",
"doorsign"
] | Art & Design > Other Art & Designs | [
"174158/images/image_1_compressed.jpg",
"174158/images/image_2_compressed.jpg",
"174158/images/image_3_compressed.jpg"
] | [
"174158/stls/3D Print Room Sign.stl"
] | CC0 | https://www.printables.com/model/174158 | data_0001.tar |
48364 | 3D printable M5 Hex Screw and Nut | <p>Simple functional M5 hexagonal nut and bolt</p>
<p>Nut is scaled to 105% from ISO4032<br/>
Bold is scaled to 95% from ISO4014</p>
<p>Perfectly functional 3D print.</p>
<h3>Print instructions</h3><h3>Parts Summary</h3>
<p>Simple functional M5 hexagonal nut and bolt</p>
<p>Nut is scaled to 105% from ISO4032<br/>
Bol... | [
"hexagonal",
"nut",
"screw",
"bolt",
"thingiverse",
"m5bolt",
"m5nut",
"hexnut",
"hexscrew"
] | Hobby & Makers > Mechanical Parts | [
"48364/images/image_1_compressed.jpg",
"48364/images/image_2_compressed.jpg",
"48364/images/image_3_compressed.jpg"
] | [
"48364/stls/m5-nut-105.stl",
"48364/stls/m5-screw-95.stl"
] | CC-BY | https://www.printables.com/model/48364 | data_0001.tar |
120694 | 3d printed 9x17 u-channel for LED Light Bar | <p>I got the idea from other projects, but I found them a little light, so I designed one that is a little more robust. </p><p>If you use my 3mf file, you will also have a nice pattern on top of the channel what is in line with the LED light bar</p> | [] | 3D Printers > Bambu Lab Parts & Upgrades | [
"120694/images/image_1_compressed.jpg"
] | [
"120694/stls/led bar.stl",
"120694/stls/u-channel LED bar.stl"
] | CC0 | https://www.printables.com/model/120694 | data_0001.tar |
544241 | 3d Printed Fabric | <p>[First, let me offer you something fantastic]<br><br>I've released 22 fantastic customizer programs "Amazing STL Creator". Try them out. Create STLs that will amaze your friends.<br><br>Right now is the best time to get all my programs. Get the entire set of 22 of my little programs for just $48. Just subscribe to m... | [
"fabric",
"chainmail",
"textile",
"mail",
"chain"
] | Household > Home Decor | [
"544241/images/image_1_compressed.jpg",
"544241/images/image_2_compressed.jpg"
] | [
"544241/stls/Sample 34x4.stl",
"544241/stls/Sample 3x2.stl",
"544241/stls/Sample 7x5.stl",
"544241/stls/Sample Batman.stl",
"544241/stls/Sample Circle 15x15.stl"
] | CC0 | https://www.printables.com/model/544241 | data_0001.tar |
636006 | 3d Printed grain of Sand | <p>A single grain of 3d printed sand. Feel free to print as many as needed to fill your zen garden. <br><br>No supports necessary.<br>Fast print.<br><br>Some slicers may automatically scale this model up when loaded, or not process the file at all. I've had good luck with Cura Slicer at about 1.2mm layer height. C... | [
"garden",
"sand",
"zen"
] | Household > Outdoor & Garden | [
"636006/images/image_1_compressed.jpg",
"636006/images/image_2_compressed.jpg",
"636006/images/image_3_compressed.jpg"
] | [
"636006/stls/Sand.stl"
] | CC0 | https://www.printables.com/model/636006 | data_0001.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.