model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
464409 | UniFi AP AC LR | <p>This version is for UniFi AP AC LR, Lite model, other models may not be suitable. Print it to replace broken bases with PETG or ABS for rigidity, PLA is also recommended.</p> | [
"wifi",
"unifi",
"apaclr"
] | Hobby & Makers > Electronics | [
"464409/images/image_1_compressed.jpg",
"464409/images/image_2_compressed.jpg"
] | [
"464409/stls/uap-ac-lr-bracket-v2.stl"
] | CC0 | https://www.printables.com/model/464409 | data_0037.tar |
464334 | UniFi AP AC Pro mount | <p>This version is for UniFi AP AC Pro model, other models may not be suitable. Print it to replace broken bases with PETG or ABS for rigidity, PLA is also recommended ,i added file without holes so it can be edited to your liking</p><ul><li>Update file .step, .f3d</li></ul> | [
"wifi",
"unifi",
"apacpro"
] | Gadgets > Other Gadgets | [
"464334/images/image_1_compressed.jpg",
"464334/images/image_2_compressed.jpg"
] | [
"464334/stls/Unifi_AP-AC_Pro_mount.stl"
] | CC0 | https://www.printables.com/model/464334 | data_0037.tar |
151534 | Unifi AP AC-LR mounting bracket | <p>Mounting bracket. Recommended to print with a 0.4 nozzle with a layer height of 0.2 or less!<br>For material, something that's more resistant to heat than PLA is advised. Commenter <a target="_blank" rel="noopener noreferrer nofollow" class="editor-link username ellipsis-overflow svelte-18bm4eb" href="https://w... | [
"wifi",
"wallmount",
"unifi"
] | Household > Other House Equipment | [
"151534/images/image_1_compressed.jpg"
] | [
"151534/stls/UniFi-AP-AC_LR v1.stl"
] | CC0 | https://www.printables.com/model/151534 | data_0037.tar |
230441 | Unifi AP mounting bracket | <p>I lost mine. Getting a new one from support proved to be impossible. I used PLA at .2mm. 15% infill is fine.</p><p>I have a nano HD and it fits well. However i think itll fit others as they standardized this part.</p> | [
"ubiquiti",
"unifi",
"nanohd"
] | Hobby & Makers > Electronics | [
"230441/images/image_1_compressed.jpg"
] | [
"230441/stls/unifi_ap_mount_mod v1.stl"
] | CC-BY | https://www.printables.com/model/230441 | data_0037.tar |
37778 | Unifi AP Removal tool | <p>I was liking the layout of thing:3661633, but needed thing:1284641.</p>
<p>I did not feel comfortable printing thing:1284641 out standing up, or even on its side with supports.</p>
<p>Since I wanted the most strength, I decided to mix them, in a way. Basically a thin flat printed part, that is heated and twisted to ... | [
"unifi",
"ubiquity",
"ap"
] | Gadgets > Other Gadgets | [
"37778/images/image_1_compressed.jpg",
"37778/images/image_2_compressed.jpg",
"37778/images/image_3_compressed.jpg"
] | [
"37778/stls/unifi_removal_tool.stl"
] | CC-BY | https://www.printables.com/model/37778 | data_0037.tar |
903946 | Unifi G5 Dome ultra wall mount | <p>Unifi Dome ultra wall mount.</p><p>2 Ruthex M3</p><p>2 M3 x 10 </p> | [
"unifi",
"ultra",
"dome",
"g5"
] | Hobby & Makers > Electronics | [
"903946/images/image_1_compressed.jpg",
"903946/images/image_2_compressed.jpg",
"903946/images/image_3_compressed.jpg",
"903946/images/image_4_compressed.jpg"
] | [
"903946/stls/dome5_ultra_wallmount.stl"
] | GPL2.0 | https://www.printables.com/model/903946 | data_0037.tar |
657466 | Unifi Gateway Lite (UXG Lite) wall mount | <p>Simple wall mount for the Unifi Gateway Lite (UXG Lite). You can face the ports either up or down, but not sideways.</p><p>“-wide” has a wide hole pattern that has the same width as the old USG Gateway wall mount, making this wall mount a drop in replacement.</p><p>Photos depict the wide hole pattern.</p><p>Printed ... | [
"wallmount",
"unifi"
] | Hobby & Makers > Organizers | [
"657466/images/image_1_compressed.jpg",
"657466/images/image_2_compressed.jpg"
] | [
"657466/stls/uxg-lite-wallmount-narrow.stl",
"657466/stls/uxg-lite-wallmount-wide-usg.stl",
"657466/stls/uxg-lite-wallmount-wide-usg3p-with-gap.stl"
] | CC-BY | https://www.printables.com/model/657466 | data_0037.tar |
504286 | Unifi POE injector tray | <p>Rámeček pro UNIFI POE injektor. Vhodný pro 24V i 48V verzi. Rámeček je velmi těsný, ale injektor se dá stále vysunout.</p> | [
"rack",
"unifi",
"rackmount",
"poe"
] | Gadgets > Computers | [
"504286/images/image_1_compressed.jpg",
"504286/images/image_2_compressed.jpg",
"504286/images/image_3_compressed.jpg"
] | [
"504286/stls/Tray Unifi POE injector with cable slot.stl",
"504286/stls/Tray Unifi POE injector.stl"
] | CC0 | https://www.printables.com/model/504286 | data_0037.tar |
56466 | Unifi Protect G3 Instant Mount | <p>Mounting base model for Unifi Protect G3 Instant camera. Can be added to your custom mount to give you a single piece solution to meet your needs.</p>
<h3>Print instructions</h3><h3>Category: Camera Summary</h3>
<p>Mounting base model for Unifi Protect G3 Instant camera. Can be added to your custom mount to give you... | [
"ubiquiti",
"unifi",
"thingiverse",
"securitycamera",
"homesecurity",
"unifiprotect"
] | Gadgets > Photo & Video | [
"56466/images/image_1_compressed.jpg",
"56466/images/image_2_compressed.jpg"
] | [
"56466/stls/base-g3-instant-mount.stl"
] | CC-BY | https://www.printables.com/model/56466 | data_0037.tar |
660502 | Unifi U6 Lite Mounting Plate | <p>This is the mounting plate that came with the Unifi U6 Lite Access Point. Not sure if this fits any other products from Unifi.</p><p>This is a Very Simple Print:</p><ul><li>PLA</li><li>Print with auto supports </li></ul> | [
"unifi",
"lite",
"u6"
] | Gadgets > Computers | [
"660502/images/image_1_compressed.jpg"
] | [
"660502/stls/Unifi U6 Lite Mounting Plate.stl"
] | CC0 | https://www.printables.com/model/660502 | data_0037.tar |
887142 | Unifi U7 Pro Stand | <h3>Printing</h3><p>Print in a temperature resistant material. PLA will warp within a week. I used ASA.</p><h3>Hardware</h3><ul><li>3x M4x4 (short) heat set inserts</li><li>4x M4x6 screws</li></ul><h3>Assembly / Installation</h3><p>Insert M4x4 threaded inserts</p><p>Drill out the top mounting hole to 4mm</p> | [
"ubiquiti",
"unifi",
"accesspoint"
] | Hobby & Makers > Electronics | [
"887142/images/image_1_compressed.jpg",
"887142/images/image_2_compressed.jpg",
"887142/images/image_3_compressed.jpg"
] | [
"887142/stls/U7 Pro Stand v10.stl"
] | GPL3.0 | https://www.printables.com/model/887142 | data_0037.tar |
1402387 | Unifi U7 Pro XGS / XG compatible horizontal wall mount | <p>There are 4 new screw holes, specifically for the U7 Pro XGS / XG. A sleeve was added to access the recessed screw hole. I use M3 bolts + nuts to attach the base plate to the wall mount arm. See pictures.There are 4 new screw holes, specifically for the U7 Pro XGS / XG. A sleeve was added to access the recessed scre... | [
"wallmount",
"ubiquiti",
"unifi",
"u7pro",
"u7",
"xgs"
] | Household > Other House Equipment | [
"1402387/images/image_1_compressed.jpg",
"1402387/images/image_2_compressed.jpg",
"1402387/images/image_3_compressed.jpg",
"1402387/images/image_4_compressed.jpg"
] | [
"1402387/stls/U7 Pro XGS Wall Mount With Hole.stl"
] | GPL3.0 | https://www.printables.com/model/1402387 | data_0037.tar |
1641379 | Unifi U7 Pro XG/XGS Stand | <p>Desk or shelf stand for unifi u7 pro xg/xgs. The u7 pro xg is quite heavy, so this is designed with large sections to be stiff and not bend over time even if printed in pla/petg, and without using a lot of filament. The ap is mounted to standoffs to isolate the stand a bit from the quite warm ap. The ap is mounted c... | [
"ubiquiti",
"unifi"
] | Gadgets > Computers | [
"1641379/images/image_1_compressed.jpg",
"1641379/images/image_2_compressed.jpg",
"1641379/images/image_3_compressed.jpg",
"1641379/images/image_4_compressed.jpg",
"1641379/images/image_5_compressed.jpg",
"1641379/images/image_6_compressed.jpg",
"1641379/images/image_7_compressed.jpg"
] | [
"1641379/stls/u7_pro_xg_stand_feet_infill.stl",
"1641379/stls/u7_pro_xg_stand_hex_nut.stl",
"1641379/stls/u7_pro_xg_stand_infill_modifier.stl",
"1641379/stls/u7_pro_xg_stand_m3_insert_negative.stl",
"1641379/stls/u7_pro_xg_stand_narrow.stl",
"1641379/stls/u7_pro_xg_stand_perimeter_modifier.stl"
] | CC-BY | https://www.printables.com/model/1641379 | data_0037.tar |
1083985 | Unifi UAC-AC-Pro AP UFO | <p>I was inspired by <a href="https://www.printables.com/model/298077-ubiquiti-unifi-ap-ufo">this</a> model, but didn't quite like the flat bottom of the AP, I wanted something more discus shaped. So I came up with this, which requires a lot more filament and printing time, but hey … I like it.</p><p>The original mount... | [
"wifi",
"ubiquiti",
"unifi",
"wlan",
"ubiquitiap",
"wirelessaccesspoint"
] | Gadgets > Computers | [
"1083985/images/image_1_compressed.jpg"
] | [
"1083985/stls/p1_shell.stl",
"1083985/stls/p2_joint.stl",
"1083985/stls/p3_ring.stl",
"1083985/stls/p4_leg.stl"
] | CC-BY | https://www.printables.com/model/1083985 | data_0037.tar |
738509 | Unifi USW Flex Mini Switch Stand (Ubiquiti) | Unifi USW Flex Mini Switch Stand for fixed pad
Stojánek na Unifi USW Flex Mini Switch | Download free 3D printable STL models | [
"stand",
"unifi",
"network",
"unifiswitch"
] | Gadgets > Computers | [
"738509/images/image_1_compressed.jpg"
] | [
"738509/stls/USW-Flex-Mini v2.stl"
] | CC0 | https://www.printables.com/model/738509 | data_0037.tar |
1074015 | Unifi USW-Pro-Max-16 Rack Mount | <p>Basic 19" rack mount ears for Ubiquiti Networks Unifi Pro Max 16 switch<br>Should fit both the non PoE (USW-Pro-Max-16) and PoE (USW-Pro-Max-16-PoE (180W)) variants.</p><p>Printed with generic PLA-CF, 3 walls and 50% infill on a BambuLab X1 Carbon.</p> | [
"unifi",
"unifiswitch",
"unifipromax"
] | Hobby & Makers > Electronics | [
"1074015/images/image_1_compressed.jpg"
] | [
"1074015/stls/USW-Pro-Max-16 Rack Mount.stl"
] | CC0 | https://www.printables.com/model/1074015 | data_0037.tar |
543074 | Unifi WiFi 6 Long Range (U6-LR) stand | <p>A small stand to prop up a Unifi WiFi 6 Long Range AP for placing on a desk/shelf/table.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>AnkerMake</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>AnkerMake M5</p></div>
<p><strong>Rafts:</strong></p>
<p>Doesn't Matter</p>... | [
"wifi",
"ubiquiti",
"unifi",
"thingiverse",
"wifimount"
] | Household > Office | [
"543074/images/image_1_compressed.jpg",
"543074/images/image_2_compressed.jpg",
"543074/images/image_3_compressed.jpg",
"543074/images/image_4_compressed.jpg"
] | [
"543074/stls/unifi-wifi-6-lr-stand.stl"
] | CC-BY | https://www.printables.com/model/543074 | data_0037.tar |
36291 | UNIT3D's LM8UU Linear Bearing | <p>Replacement Linear Bearings for 8mm rods of Prusa printers</p>
<ul>
<li>Minimal friction surface</li>
<li>Clean outside, no grooves or logos</li>
</ul>
<p>Print time: 39 minutes</p>
<ul>
<li>No support</li>
<li>0% infill</li>
</ul>
<p>The 3D Models found online where pretty low-poly and had other features I did not ... | [
"bearing",
"lm8uu",
"linear"
] | 3D Printers > Other Printer Parts & Upgrades | [
"36291/images/image_1_compressed.jpg"
] | [
"36291/stls/lm8uu_unit3d_81-84mm.stl",
"36291/stls/lm8uu_unit3d_810.stl",
"36291/stls/lm8uu_unit3d_820.stl",
"36291/stls/lm8uu_unit3d_830.stl",
"36291/stls/lm8uu_unit3d_840.stl"
] | CC-BY | https://www.printables.com/model/36291 | data_0037.tar |
166462 | Universal AC Remote Control Holder |
<p>Simple wall-mounted holder for the ubiquitous K-1028E 1000 in 1 universal a/c remote control (Chunghop)</p>
<p>Use 2 pcs 3~3.5 mm screws for mounting on wall.</p>
Category: Household
| [
"thingiverse",
"airconditioner",
"remotecontrolholder"
] | Household > Other House Equipment | [
"166462/images/image_1_compressed.jpg",
"166462/images/image_2_compressed.jpg"
] | [
"166462/stls/remote_holder.stl"
] | CC-BY | https://www.printables.com/model/166462 | data_0037.tar |
1028827 | Universal Adjustable Spool Holder for Cereal Dry Box | <p>I found <a href="https://www.printables.com/@GunplaMark_876550">@GunplaMark_876550</a>'s <a href="https://www.printables.com/model/952313-filament-dry-box-with-rollers"><strong>Filament Dry Box with Rollers</strong></a><strong> </strong>and really liked the concept, except that there was too much resistance in the r... | [
"spool",
"spoolholder",
"smooth",
"lowfriction"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1028827/images/image_1_compressed.jpg",
"1028827/images/image_2_compressed.jpg",
"1028827/images/image_3_compressed.jpg",
"1028827/images/image_4_compressed.jpg",
"1028827/images/image_5_compressed.jpg",
"1028827/images/image_6_compressed.jpg"
] | [
"1028827/stls/Adjustable spool holder female.stl",
"1028827/stls/Adjustable spool holder male.stl"
] | CC-BY | https://www.printables.com/model/1028827 | data_0037.tar |
1222863 | Universal Aerator Tool Water Tap | <blockquote><p><strong><em>I stopped uploading and updating my models here at Printables!</em></strong></p><p><strong><em>My actual models can be found on </em></strong><a target="_blank" rel="ugc" class="editor-link" href="https://makerworld.com/@schiko"><strong><em>my MakerWorld profile</em></strong></a><strong><em> ... | [
"opener",
"water",
"tool",
"wrench",
"tap",
"screw",
"faucet",
"aerator",
"perlator",
"key",
"metric",
"universal",
"m20",
"m28",
"m18",
"watertap",
"spigot",
"m24",
"m22",
"breather",
"m26",
"aeratortool"
] | Hobby & Makers > Tools | [
"1222863/images/image_1_compressed.jpg",
"1222863/images/image_2_compressed.jpg"
] | [
"1222863/stls/Universal Aerator Tool Water Tap.stl"
] | CC-BY | https://www.printables.com/model/1222863 | data_0037.tar |
710820 | Universal backpack/jacket hook | <p>Inspired by Heroclip by GearAid <a href="https://www.gearaid.com/pages/heroclip">https://www.gearaid.com/pages/heroclip</a> this hybrid gear clip allows bags, backpacks or jackets by hung on places, where they otherwise wouldn't.<br><br>About 60 cm (2' for those from the other side of Atlantic) of paracord or other ... | [
"holder",
"clip",
"gear",
"hiking",
"hang",
"backpack",
"backpackclip",
"jacket",
"edc",
"carabiner",
"tablehook",
"backpacking",
"camp",
"tableclip",
"contraption",
"rucksack",
"backpackholder",
"gearclip",
"gearhook",
"heroclip",
"gearholder"
] | Hobby & Makers > Organizers | [
"710820/images/image_1_compressed.jpg",
"710820/images/image_10_compressed.jpg",
"710820/images/image_11_compressed.jpg",
"710820/images/image_12_compressed.jpg",
"710820/images/image_13_compressed.jpg",
"710820/images/image_14_compressed.jpg",
"710820/images/image_15_compressed.jpg",
"710820/images/i... | [
"710820/stls/contraption-carabiner-rev-a.stl",
"710820/stls/contraption-carabiner-rev-b.stl",
"710820/stls/contraption-tablehook-rev-a.stl",
"710820/stls/contraption-tablehook-rev-b.stl",
"710820/stls/paracordless-contraption-rev-b.stl"
] | CC-BY | https://www.printables.com/model/710820 | data_0037.tar |
915286 | Universal backpack/jacket hook - Contest reupload | <p><strong>Reuploaded for contest: Backpack Boosters.</strong><br><br>Inspired by Heroclip by GearAid <a href="https://www.gearaid.com/pages/heroclip">https://www.gearaid.com/pages/heroclip</a> this hybrid gear clip allows bags, backpacks or jackets by hung on places, where they otherwise wouldn't.<br><br>About 60 cm (... | [
"holder",
"clip",
"gear",
"backpack",
"backpackclip",
"edc",
"carabiner",
"backpacking",
"camp",
"tableclip",
"rucksack",
"gearclip",
"gearhook",
"heroclip",
"gearholder",
"jacekt",
"backpackboosters"
] | Hobby & Makers > Organizers | [
"915286/images/image_1_compressed.jpg",
"915286/images/image_2_compressed.jpg",
"915286/images/image_3_compressed.jpg",
"915286/images/image_4_compressed.jpg"
] | [
"915286/stls/contraption-carabiner-rev-b.stl",
"915286/stls/contraption-tablehook-rev-b.stl",
"915286/stls/paracordless-contraption-rev-b.stl"
] | CC-BY | https://www.printables.com/model/915286 | data_0037.tar |
329770 | Universal bauble ornament hanger | <p>This is Universal ornament hanger.</p><figure class="image image_resized image-style-align-right" style="width:50%;"><img src="https://media.printables.com/media/prints/329770/rich_content/17bb3062-d433-4a77-b247-a31bcfbe8fd7/20231124_125901.jpg#%7B%22uuid%22%3A%22496e3a9d-7bb8-4909-b04a-c077b340168f%22%2C%22w%22%3A... | [
"vase",
"hook",
"christmas",
"hanger",
"spiral",
"ornament",
"bauble",
"christmasbauble"
] | Seasonal designs > Winter & Christmas & New Year's | [
"329770/images/image_1_compressed.jpg",
"329770/images/image_2_compressed.jpg",
"329770/images/image_3_compressed.jpg",
"329770/images/image_4_compressed.jpg",
"329770/images/image_5_compressed.jpg",
"329770/images/image_6_compressed.jpg",
"329770/images/image_7_compressed.jpg"
] | [
"329770/stls/cap.stl",
"329770/stls/hook.stl",
"329770/stls/ornament-hook-2023.stl"
] | CC0 | https://www.printables.com/model/329770 | data_0037.tar |
1371783 | universal cable CLAMPS/CLIPS | Different types and sizez of cable clamps/clips | Download free 3D printable STL models | [
"cable",
"clamp",
"cablemanagement",
"cableclip",
"cableclamp"
] | Household > Other House Equipment | [
"1371783/images/image_1_compressed.jpg"
] | [
"1371783/stls/BLACK 2cable clamp.stl",
"1371783/stls/BLUE 2cable clamp XL.stl",
"1371783/stls/GREEN corner cable clamp.stl",
"1371783/stls/RED around cable clamp.stl",
"1371783/stls/WHITE mini nail clamp.stl",
"1371783/stls/YELLOW 30 mm hose clamp.stl"
] | CC0 | https://www.printables.com/model/1371783 | data_0037.tar |
546514 | Universal Cable Holder with Hook & Loop | <p>The Universal Cable Holder with Self-locking Zip Ties is a revolutionary product that allows you to keep your cables perfectly organized and free from tangles. No more searching for the right cable amidst the clutter of wires behind your desk, TV, or in your car. With our simple and practical cable holder, your work... | [
"holder",
"hook",
"gadget",
"easy",
"loop",
"underdesk",
"calbe",
"undertable",
"undertablemount",
"easylife",
"hookloop"
] | Gadgets > Computers | [
"546514/images/image_1_compressed.jpg",
"546514/images/image_2_compressed.jpg",
"546514/images/image_3_compressed.jpg",
"546514/images/image_4_compressed.jpg",
"546514/images/image_5_compressed.jpg"
] | [
"546514/stls/holder.stl",
"546514/stls/holder2.stl"
] | CC-BY | https://www.printables.com/model/546514 | data_0037.tar |
570996 | Universal click on stick Plant Holder Clips | <p>Easy to print, simple plant clips. Can be scaled in the X, Y and Z so that they can be placed on larger or smaller plant stakes.</p> | [
"holder",
"plant",
"planter",
"support",
"plantpot"
] | Household > Outdoor & Garden | [
"570996/images/image_1_compressed.jpg",
"570996/images/image_2_compressed.jpg"
] | [
"570996/stls/PlantClips.stl"
] | CC-BY | https://www.printables.com/model/570996 | data_0037.tar |
83942 | Universal Compass - Print-in-place | <p>Add a pen. Put the screws.</p><p> </p><p><strong>Use the middle screw to lock/unlock the compass</strong>. You don't need to overtight the screw to lock the compass. A short pressure should be enough.</p><p> </p><p><strong>2 versions :</strong></p><ul><li><strong>Plastic point :</strong> 100% printed compa... | [
"geometry",
"printinplace",
"architecture",
"divider",
"drawing",
"mathematics",
"circles",
"compas"
] | Hobby & Makers > Tools | [
"83942/images/image_1_compressed.jpg",
"83942/images/image_10_compressed.jpg",
"83942/images/image_11_compressed.jpg",
"83942/images/image_12_compressed.jpg",
"83942/images/image_2_compressed.jpg",
"83942/images/image_3_compressed.jpg",
"83942/images/image_4_compressed.jpg",
"83942/images/image_5_comp... | [
"83942/stls/Universal Compass MetalPoint Project.stl",
"83942/stls/Universal Compass MetalPoint.stl",
"83942/stls/Universal Compass.stl"
] | CC-BY | https://www.printables.com/model/83942 | data_0037.tar |
501176 | Universal Controller Stand | <p>Universal Controller Stand. Smooth, flexible, and perfect for gamers. </p> | [] | Gadgets > Video Games | [
"501176/images/image_1_compressed.jpg",
"501176/images/image_2_compressed.jpg",
"501176/images/image_3_compressed.jpg",
"501176/images/image_4_compressed.jpg"
] | [
"501176/stls/OutlineControllerStand.stl"
] | CC0 | https://www.printables.com/model/501176 | data_0037.tar |
361357 | Universal Controller Wall Mount | <p>Universal Controller mount that supports a wide range of controllers ranging from the Steam controller, Switch Joycons, switch pro, Xbox 360, Xbox One and more.</p> | [
"wall",
"mount",
"wallmount",
"controller"
] | Art & Design > Wall-mounted | [
"361357/images/image_1_compressed.jpg"
] | [
"361357/stls/Universal controller wall mount V1.stl",
"361357/stls/Universal Controller Wall Mount V2.stl"
] | CC-BY | https://www.printables.com/model/361357 | data_0037.tar |
499938 | Universal Cordless Drill Holder - Ultralight Edition | <p>I want to start by giving respect where respect is due for the original model creators for giving me the inspiration to tinker and a place to start! Thanks kerngebiet and mnemic!</p><p>I designed a drill holder that uses a lot less material than other holder models and saves you valuable print time! See Print Time C... | [
"drill",
"dewalt",
"craftsman",
"organization",
"toolstorage",
"makita",
"ryobi",
"milwaukee",
"drillholder",
"impactdriver",
"powerdrill"
] | Hobby & Makers > Tools | [
"499938/images/image_1_compressed.jpg",
"499938/images/image_2_compressed.jpg",
"499938/images/image_3_compressed.jpg",
"499938/images/image_4_compressed.jpg",
"499938/images/image_5_compressed.jpg",
"499938/images/image_6_compressed.jpg",
"499938/images/image_7_compressed.jpg"
] | [
"499938/stls/Universal Drill Holder - 35MM v1.stl",
"499938/stls/Universal Drill Holder v3.stl"
] | CC-BY | https://www.printables.com/model/499938 | data_0037.tar |
1120478 | Universal Cordless Drill/Driver Holder/Mount (Milwaukee, Makita, DeWalt, Bosch, Ryobi, Ridge, Festool) | <p><strong>Universal Cordless Impact Driver/Drill Holder </strong><br><br>A universal cordless Impact Driver/Drill Holder meant to organize your workbench as well as make it more ergonomic and easier to use. Front extrusion allows for it do double as a bottle holder.<br><br><strong>Instalation requires:</stro... | [
"organizer",
"drill",
"bosch",
"dewalt",
"woodworking",
"organization",
"tools",
"toolholder",
"universal",
"makita",
"cordless",
"ryobi",
"festool",
"bottleholder",
"milwaukee",
"ergonomic",
"drillholder",
"nosupports",
"impactdriver",
"cordlessdrill",
"ridge",
"driverhold... | Hobby & Makers > Tools | [
"1120478/images/image_1_compressed.jpg",
"1120478/images/image_2_compressed.jpg",
"1120478/images/image_3_compressed.jpg"
] | [
"1120478/stls/UniversalDrillHolder.stl"
] | CC-BY | https://www.printables.com/model/1120478 | data_0037.tar |
1134180 | Universal cordless Impact Driver/Drill Bit Holder (Milwaukee, Makita, DeWalt, Bosch, Ryobi, Rigid, Festool) | <p><strong>Universal Impact Driver/Drill Bit Holder</strong><br><br>A universal cordless Impact Driver/Drill Bit Holder meant <br><br><strong>Instalation requires:</strong></p><ul><li>1 x Brand dependent screw ( check sheet below )</li><li>2 x Neodymium Magnets 20x10x2 mm ( <a href="https://www.amazon.co.uk/M... | [
"holder",
"hook",
"magnet",
"axe",
"bit",
"drill",
"belt",
"bosch",
"dewalt",
"magnetic",
"universal",
"m4",
"makita",
"hammer",
"cordless",
"ryobi",
"rigid",
"festool",
"driver",
"milwaukee",
"ergonomic",
"bitholder",
"impactdriver",
"impact",
"oragnizer",
"belthoo... | Hobby & Makers > Tools | [
"1134180/images/image_1_compressed.jpg",
"1134180/images/image_2_compressed.jpg",
"1134180/images/image_3_compressed.jpg",
"1134180/images/image_4_compressed.jpg",
"1134180/images/image_5_compressed.jpg",
"1134180/images/image_6_compressed.jpg",
"1134180/images/image_7_compressed.jpg"
] | [
"1134180/stls/Axehammer.stl",
"1134180/stls/MiniHammer.stl"
] | CC-BY | https://www.printables.com/model/1134180 | data_0037.tar |
126575 | Universal desk cable holder | <p>Fits any cable from USB-C or USB-A to VGA or RJ-45</p><p>Print it with 5-10% infill. No supports needed. </p><p>Avalible 2 variants: </p><ul><li>For 4 cables</li><li>For 6 cables</li></ul><p>(If You want a holder for a different number of cables just comment or send me a message and i will make it for You.... | [
"cables",
"deskorganizer",
"usbholder",
"nosupport",
"cableorganizer",
"deskorganiser",
"universalholder",
"cableorganization",
"deskorganization"
] | Hobby & Makers > Organizers | [
"126575/images/image_1_compressed.jpg",
"126575/images/image_2_compressed.jpg",
"126575/images/image_3_compressed.jpg",
"126575/images/image_4_compressed.jpg",
"126575/images/image_5_compressed.jpg",
"126575/images/image_6_compressed.jpg",
"126575/images/image_7_compressed.jpg"
] | [
"126575/stls/4Slots.stl",
"126575/stls/6Slots.stl"
] | CC-BY | https://www.printables.com/model/126575 | data_0037.tar |
115398 | Universal Dragon Filament Clip | <p>I am new with editing and remixing meshes so it is definitely not perfect. Below are the original creators and remixers where I got the designs.</p><p>Sneaks: <a href="https://www.thingiverse.com/thing:3269752">https://www.thingiverse.com/thing:3269752</a></p><p>Lyl3: <a href="https://www.thingiverse.com/thing:37573... | [
"dragon",
"filament",
"clip",
"universal"
] | 3D Printers > Accessories | [
"115398/images/image_1_compressed.jpg",
"115398/images/image_2_compressed.jpg"
] | [
"115398/stls/Dragon Clip Remix.stl"
] | CC-BY | https://www.printables.com/model/115398 | data_0037.tar |
100577 | Universal Dust Blower | <p>A flexible sphere that can be pushed, then air will be pushed through a nozzle so you can clean dust in hard to reach places, often used for camera or for example cleaning a printer. The black part is printed in makerpoint Flex45 but can be printed with any TPU based filament (as long as it is flexible)</p>
<p>I pri... | [
"camera",
"tpu",
"dust",
"thingiverse",
"dustblower"
] | Hobby & Makers > Tools | [
"100577/images/image_1_compressed.jpg",
"100577/images/image_2_compressed.jpg",
"100577/images/image_3_compressed.jpg",
"100577/images/image_4_compressed.jpg",
"100577/images/image_5_compressed.jpg"
] | [
"100577/stls/Body2.stl",
"100577/stls/Body_reinforced.stl",
"100577/stls/Body_reinforced_u_steogrex.stl",
"100577/stls/Top2.stl"
] | CC-BY | https://www.printables.com/model/100577 | data_0037.tar |
1563040 | Universal Electrical Cabinet Key – 4 Way Utility Tool | <p>This <strong>4-Way Utility Key</strong> is designed for opening a wide range of electrical, utility, and service cabinets.</p><p>The compact cross-shaped design combines multiple common key profiles into a single tool, making it ideal for technicians, electricians, and DIY users. It is suitable for electrical cabine... | [
"tool",
"maintenance",
"key",
"utilitybox",
"electricbox",
"servicekey",
"utilitykey"
] | Hobby & Makers > Tools | [
"1563040/images/image_1_compressed.jpg",
"1563040/images/image_2_compressed.jpg"
] | [
"1563040/stls/key .stl"
] | GPL3.0 | https://www.printables.com/model/1563040 | data_0037.tar |
1269971 | Universal ergonomic screwdriver | <h3>Universal Ergonomic Screwdriver (Remix)</h3><p>This is an updated version of the popular universal screwdriver, focusing on improved ergonomics and an expanded set of collets. The main changes concern the shape of the handle — it now fits much better in the hand, and the modified length allows you to apply more tor... | [
"drill",
"jigsaw",
"jig",
"saw",
"screwdriver",
"drillholder",
"bitholder",
"holdertool"
] | Hobby & Makers > Tools | [
"1269971/images/image_1_compressed.jpg",
"1269971/images/image_2_compressed.jpg",
"1269971/images/image_3_compressed.jpg",
"1269971/images/image_4_compressed.jpg",
"1269971/images/image_5_compressed.jpg",
"1269971/images/image_6_compressed.jpg",
"1269971/images/image_7_compressed.jpg",
"1269971/images... | [
"1269971/stls/1mm collet.stl",
"1269971/stls/2mm collet.stl",
"1269971/stls/4mm collet.stl",
"1269971/stls/6mm collet.stl",
"1269971/stls/A1 mini Universal ergonomic holder.stl",
"1269971/stls/ClumpNut.stl",
"1269971/stls/Jig saw collet.stl",
"1269971/stls/TurnEjector.stl",
"1269971/stls/Universal e... | CC-BY | https://www.printables.com/model/1269971 | data_0037.tar |
1340617 | Universal ergonomic screwdriver V2 | <h4>Universal ergonomic screwdriver V2 (new length and shape) compartable with all original collets.</h4><p> </p><p>New elements and changes: </p><ul><li>Bigger round handle</li><li>Collet for 9mm blades</li><li>Collets for 4mm 6mm bits with rotation <i>stopper</i></li><li>Collet for deburring tool</li>... | [
"tool",
"blade",
"screwdriver",
"ergonomic",
"collet",
"deburring",
"bladeholder",
"rotatinghandle"
] | Hobby & Makers > Tools | [
"1340617/images/image_1_compressed.jpg",
"1340617/images/image_2_compressed.jpg",
"1340617/images/image_3_compressed.jpg",
"1340617/images/image_4_compressed.jpg",
"1340617/images/image_5_compressed.jpg",
"1340617/images/image_6_compressed.jpg",
"1340617/images/image_7_compressed.jpg",
"1340617/images... | [
"1340617/stls/2mm collet R-stop.stl",
"1340617/stls/4mm collet R-stop.stl",
"1340617/stls/6mm collet R-stop.stl",
"1340617/stls/9mm blade collet v2.stl",
"1340617/stls/9mm blade collet.stl",
"1340617/stls/Brimm collet.stl",
"1340617/stls/ClumpNut V2.stl",
"1340617/stls/CurvHandle V1 R-stop.stl",
"13... | CC-BY | https://www.printables.com/model/1340617 | data_0037.tar |
371801 | Universal Filament Filter and Lubricator | <blockquote><p><a href="https://www.creativetools.se/">Creative Tools</a> Creative Tools supplies 3D printer and 3D scanner products incl filaments, accessories and support and also 3D software for leading CAD, modeling, animation, and rendering.</p><p>This small easy-to-print device can protect your filament-based 3D ... | [
"filament",
"3dprinter",
"filamentfilter",
"dustfilter",
"filamentdustfilter",
"175filamentfilter",
"filamentlubricator"
] | 3D Printers > Accessories | [
"371801/images/image_1_compressed.jpg",
"371801/images/image_10_compressed.jpg",
"371801/images/image_11_compressed.jpg",
"371801/images/image_12_compressed.jpg",
"371801/images/image_2_compressed.jpg",
"371801/images/image_3_compressed.jpg",
"371801/images/image_4_compressed.jpg",
"371801/images/imag... | [
"371801/stls/Universal_filament_filter.stl",
"371801/stls/Universal_Filament_Filter_smaller_filament-exit-hole_By_CT3D.stl",
"371801/stls/Universal_Filament_Filter_smaller_filament-exit-hole_v02_By_CT3D.stl"
] | CC-BY | https://www.printables.com/model/371801 | data_0037.tar |
1128143 | Universal flex track for wooden train | <p>This universal connector, to its special design, fits all popular wooden railway tracks.<br> </p><p>Compatibility:</p><ul><li>IKEA Lillabo</li><li>BigJigs</li><li>LIDL train</li><li>BRIO</li></ul><p>In order to print correctly, you need to have the filament flow properly calibrated. If the joints are too tight,... | [
"ikea",
"wood",
"track",
"train",
"brio",
"woodentrain",
"wooden",
"woodentrack",
"lillabo",
"briocompatible",
"bigjigs",
"briotrack"
] | Toys & Games > Building Toys | [
"1128143/images/image_1_compressed.jpg",
"1128143/images/image_2_compressed.jpg",
"1128143/images/image_3_compressed.jpg",
"1128143/images/image_4_compressed.jpg",
"1128143/images/image_5_compressed.jpg",
"1128143/images/image_6_compressed.jpg"
] | [
"1128143/stls/flex.stl",
"1128143/stls/flex_11.stl",
"1128143/stls/flex_20.stl",
"1128143/stls/flex_5.stl",
"1128143/stls/flex_female.stl",
"1128143/stls/flex_male.stl"
] | GPL3.0 | https://www.printables.com/model/1128143 | data_0037.tar |
146971 | universal foldable photo stand | <p>Easy to print Photo stand.</p><p>Easy to scale</p><p>universal use</p><p> </p> | [
"stand",
"photo",
"photoframe",
"pictureframe"
] | Art & Design > Other Art & Designs | [
"146971/images/image_1_compressed.jpg",
"146971/images/image_2_compressed.jpg",
"146971/images/image_3_compressed.jpg",
"146971/images/image_4_compressed.jpg",
"146971/images/image_5_compressed.jpg",
"146971/images/image_6_compressed.jpg",
"146971/images/image_7_compressed.jpg",
"146971/images/image_8... | [
"146971/stls/Stand.stl"
] | CC-BY | https://www.printables.com/model/146971 | data_0037.tar |
40669 | Universal Frame Mount for MK3s | <p>This is a clamp-style mount designed to attach anything to the Prusa MK3s frame, top or sides. It tightens with a screw and can be positioned anywhere. It provides two mounting holes on the top, two on the bottom, and four on the back, with slots to insert square M3 nuts for each hole. The distance between all mount... | [
"upgrade",
"frame",
"mk3",
"mount",
"mk3s",
"clamp",
"prusai3mk3",
"attachment"
] | 3D Printers > Prusa Parts & Upgrades | [
"40669/images/image_1_compressed.jpg",
"40669/images/image_2_compressed.jpg",
"40669/images/image_3_compressed.jpg",
"40669/images/image_4_compressed.jpg",
"40669/images/image_5_compressed.jpg",
"40669/images/image_6_compressed.jpg"
] | [
"40669/stls/long_mount_bottom.stl",
"40669/stls/long_mount_top.stl",
"40669/stls/short_mount_bottom.stl",
"40669/stls/short_mount_top.stl"
] | CC-BY | https://www.printables.com/model/40669 | data_0037.tar |
797289 | Universal FT240 Balun / Unun Box | <p>Box for a balun or unun of your desired configuration wound on a FT240 toroid.</p><p>Features:</p><ul><li>M5 bind terminals with winged nuts used to quickly connect or disconnect antenna radials.</li><li>The ring with 8 holes in the middle of the bottom part is used to secure the toroid in place with zip ties. Pass ... | [
"box",
"hamradio",
"balun",
"unun"
] | Hobby & Makers > Electronics | [
"797289/images/image_1_compressed.jpg",
"797289/images/image_2_compressed.jpg",
"797289/images/image_3_compressed.jpg",
"797289/images/image_4_compressed.jpg"
] | [
"797289/stls/2x Box bottom.stl",
"797289/stls/2x Box top.stl",
"797289/stls/Box bottom.stl",
"797289/stls/Box top.stl"
] | CC-BY | https://www.printables.com/model/797289 | data_0037.tar |
9960 | Universal Fuse Locks - Lock & Tagout | <p>Universal locks to ensure safe electrical work on automatic fuses. Compliment your Lockout/Tagout supplies.</p>
<p>4 versions provided:</p>
<ul>
<li>Fuse lock for M3x20 screw and brass insert</li>
<li>Fuse lock for M4x25 screw and brass insert</li>
<li>Fuse lock with everything 3D printed</li>
<li>Fuse lock for Schn... | [
"tag",
"lock",
"and",
"universal",
"automatic",
"circuit",
"fuse",
"tagout",
"breaker",
"out",
"lockout"
] | Hobby & Makers > Electronics | [
"9960/images/image_1_compressed.jpg",
"9960/images/image_2_compressed.jpg",
"9960/images/image_3_compressed.jpg"
] | [
"9960/stls/fuse-lock-schneider-compact.stl",
"9960/stls/fuse-lock-universal-all-in-one.stl",
"9960/stls/fuse-lock-universal-m3x20.stl",
"9960/stls/fuse-lock-universal-m4x25.stl",
"9960/stls/fuse-lock-universal-w_screw.stl"
] | CC0 | https://www.printables.com/model/9960 | data_0037.tar |
565847 | Universal Game Controller Wall Mount Stand | <p>Perfect for holding game controllers.</p> | [] | Art & Design > Wall-mounted | [
"565847/images/image_1_compressed.jpg",
"565847/images/image_2_compressed.jpg"
] | [
"565847/stls/GameControllerStand.stl"
] | CC0 | https://www.printables.com/model/565847 | data_0037.tar |
56949 | Universal gamepad wall mount | <p>It is designed to use adhesive tape that is at least 1.5~2.0mm thick. Thinner tape might have problems with reaching the wall without modification to a model.</p>
<p>All common controllers should have no issues sitting on this. So far I've checked it with Switch JoyCon, Switch Pro, Xbox 360 and Xbox One, PS4 and Ste... | [
"playstation",
"wallmount",
"joycon",
"nintendoswitch",
"wallmounted",
"gamepad",
"xbox",
"steamcontroller"
] | Hobby & Makers > Organizers | [
"56949/images/image_1_compressed.jpg",
"56949/images/image_2_compressed.jpg",
"56949/images/image_3_compressed.jpg",
"56949/images/image_4_compressed.jpg"
] | [
"56949/stls/gamepad-wallmount.stl"
] | CC-BY | https://www.printables.com/model/56949 | data_0037.tar |
177105 | Universal Glasses Stand 4x |
<p>I needed a set of glasses stands with 4 glasses on it so I modified Muzz64's <a href="https://www.thingiverse.com/thing:1264885">Universal Glasses Stand</a></p>
Category: Organization
| [
"office",
"holder",
"fashion",
"sunglasses",
"easy",
"cool",
"organization",
"compact",
"glasses",
"oakley",
"thingiverse",
"easyprint",
"sunglassesholder"
] | Household > Office | [
"177105/images/image_1_compressed.jpg"
] | [
"177105/stls/glasses_stand_-_4.stl"
] | CC-BY | https://www.printables.com/model/177105 | data_0037.tar |
1101735 | Universal Gridfinity Plate for Milwaukee Packout Drawers - Slim & Regular Compatible | <p>Upgrade your Milwaukee Packout organization with this <strong>Universal Gridfinity Plate</strong>! Unlike my previous models that were limited to either slim or regular drawers, this design works seamlessly with <strong>both drawer types</strong>, saving you the hassle of choosing between separate plates.</p><p>Key ... | [
"milwaukee",
"milwaukeepackout",
"gridfinity",
"gridfinitybaseplate"
] | Hobby & Makers > Organizers | [
"1101735/images/image_1_compressed.jpg",
"1101735/images/image_2_compressed.jpg",
"1101735/images/image_3_compressed.jpg"
] | [
"1101735/stls/4mm pin.stl",
"1101735/stls/PackoutUniversalGridfinityPlate.stl",
"1101735/stls/PackoutUniversalGridfinityPlateBL.stl",
"1101735/stls/PackoutUniversalGridfinityPlateBR.stl",
"1101735/stls/PackoutUniversalGridfinityPlateFL.stl",
"1101735/stls/PackoutUniversalGridfinityPlateFR.stl",
"1101735... | CC-BY | https://www.printables.com/model/1101735 | data_0037.tar |
178271 | Universal keyboard stand | <p>Modified from Keyboard stand by Ematyk so the keyboard is not elevated<br><br>Added also some grip on the bottom because the plastic slipped on my wooden tabletop. Not sure if it really helped.<br><br>The great thing about this design (as with the original, so all credit to Ematyk) is how universal the keyboard stan... | [] | Gadgets > Computers | [
"178271/images/image_1_compressed.jpg",
"178271/images/image_2_compressed.jpg",
"178271/images/image_3_compressed.jpg"
] | [
"178271/stls/keyboardstand_roughBottom.stl"
] | CC-BY | https://www.printables.com/model/178271 | data_0037.tar |
173279 | Universal Laptop Riser | <p>Rulerlike Laptop Riser, flat enough to rise only the backside a little step, just to get some cool air, very stabile. Works even with Windows!</p> | [] | Gadgets > Computers | [
"173279/images/image_1_compressed.jpg",
"173279/images/image_2_compressed.jpg",
"173279/images/image_3_compressed.jpg"
] | [
"173279/stls/Universal Laptop Riser v2.stl"
] | CC-BY | https://www.printables.com/model/173279 | data_0037.tar |
351173 | Universal Laptop Stand | <p>Simple vertical stand sized for standard laptop. Open sides allows for cord connections. I put it at the back of my desk against the wall to create the more table space.</p><p>There are two Models:</p><ol><li>Medium - .688" thick</li><li>Wide - .938" thick</li></ol><p>Let me know if you need another thickness and I ... | [
"tabletop",
"computer",
"laptop",
"laptopstand",
"verticallaptopstand",
"vertical",
"verticalstand"
] | Gadgets > Computers | [
"351173/images/image_1_compressed.jpg",
"351173/images/image_2_compressed.jpg",
"351173/images/image_3_compressed.jpg",
"351173/images/image_4_compressed.jpg",
"351173/images/image_5_compressed.jpg",
"351173/images/image_6_compressed.jpg",
"351173/images/image_7_compressed.jpg"
] | [
"351173/stls/Laptop Stand-Universal-Medium.stl",
"351173/stls/Laptop Stand-Universal-Wide.stl"
] | CC-BY | https://www.printables.com/model/351173 | data_0037.tar |
109076 | Universal Microphone Stand Cable Clip | <p>This is a replacement part based on the <a href="https://windtech.tv/product/cc-6/">WindTech CC-6 Mic Stand Cable Clip</a> for microphone stands and boom poles.</p><p>My brother has a set of these from <a href="https://www.sweetwater.com/store/detail/StandClip--windtech-cc-6">Sweetwater</a> they work great. Eventual... | [
"parametric",
"microphone",
"windtech",
"cc6",
"boompole"
] | Gadgets > Audio | [
"109076/images/image_1_compressed.jpg",
"109076/images/image_2_compressed.jpg",
"109076/images/image_3_compressed.jpg",
"109076/images/image_4_compressed.jpg",
"109076/images/image_5_compressed.jpg",
"109076/images/image_6_compressed.jpg"
] | [
"109076/stls/Universal Microphone Stand Cable Clip - Large.stl",
"109076/stls/Universal Microphone Stand Cable Clip - Small.stl"
] | CC-BY | https://www.printables.com/model/109076 | data_0037.tar |
62890 | Universal mobile tripod | <p>Remix of Folding tripod for Portable Phone. https://www.thingiverse.com/thing:2813597</p><p>Add mount for vertical and horizontal grip.</p><p>For more information you can play this video:<br> </p><figure class="media"><oembed url="https://youtu.be/3VFkMnwIs0c"></oembed></figure><p> </p><p>You may also like... | [
"nsfw",
"cameramount",
"phone",
"tripod",
"universal",
"mobile",
"thingiverse",
"mobilephoneholder",
"mobilephonestand",
"mobilephone",
"phonetripodmount"
] | Gadgets > Photo & Video | [
"62890/images/image_1_compressed.jpg",
"62890/images/image_10_compressed.jpg",
"62890/images/image_11_compressed.jpg",
"62890/images/image_12_compressed.jpg",
"62890/images/image_13_compressed.jpg",
"62890/images/image_14_compressed.jpg",
"62890/images/image_15_compressed.jpg",
"62890/images/image_16_... | [
"62890/stls/01_tripod_base.stl",
"62890/stls/02_tripod_base2.stl",
"62890/stls/03_Tripod_leg_c.stl",
"62890/stls/04_Tripod_leg_a.stl",
"62890/stls/05_Tripod_leg_b.stl",
"62890/stls/06_tripod_screw.stl",
"62890/stls/07_tripod_screw_base.stl",
"62890/stls/08_tripod_bottom.stl",
"62890/stls/09_tripod_S... | CC-BY | https://www.printables.com/model/62890 | data_0037.tar |
554377 | Universal Parametric Vertical Laptop Stand | <p>This is a re-creation from the ground up of my previous MacBook vertical stand but now it's completely parametric and allows you to customize it to your specific needs and should work with any laptop, not just MacBooks!*</p><p>This was designed in Fusion360 and I have provided the .STEP and .F3D files. Editing... | [
"parametric",
"stand",
"laptop",
"vertical",
"macbook",
"m1",
"m2"
] | Household > Office | [
"554377/images/image_1_compressed.jpg",
"554377/images/image_2_compressed.jpg",
"554377/images/image_3_compressed.jpg"
] | [
"554377/stls/Macbook_Pro_14-15inch_2021.stl",
"554377/stls/Macbook_Pro_16inch_2021.stl"
] | CC-BY | https://www.printables.com/model/554377 | data_0037.tar |
283286 | Universal Peg Board Peg System | <p>The issues I have always had when printing large peg board organizers is that support is required for the hooks in the back of the organizer. This makes it less desirable. So I created a concept for a modular universal peg board organizer. You can print lots of these universal pegs then design dif... | [
"pegboard",
"pegboardmount"
] | Hobby & Makers > Organizers | [
"283286/images/image_1_compressed.jpg",
"283286/images/image_2_compressed.jpg"
] | [
"283286/stls/2 peg base.stl",
"283286/stls/3 peg base.stl",
"283286/stls/peg.stl",
"283286/stls/Sample Socket Wrench Extension holder.stl"
] | CC0 | https://www.printables.com/model/283286 | data_0037.tar |
179419 | Universal phone stand with adjustable angle (enhanced) | <p>There is a small issue with the original design: when you fold the stand, the arms are not getting stabilized, they are easily swing back and forth.</p>
<p>I utilized the design with some small tweak to make the arms stay put when folded. If you like the original one, just try my enhanced version, it will make life... | [
"phonestand",
"thingiverse"
] | Gadgets > Portable Devices | [
"179419/images/image_1_compressed.jpg"
] | [
"179419/stls/folding_stand_adiya.stl"
] | CC-BY | https://www.printables.com/model/179419 | data_0037.tar |
329862 | Universal phone/tablet stand with adjustable angle. | <ul><li>Stable - allows you to use the touch screen without tipping the phone/tablet over</li><li>It's the size of a credit card and 5mm thick.</li><li>Prints assembled in place with no support.</li><li>Tested with iPhone 6, iPad Air and New iPad (iPad 3, retina).</li></ul> | [
"stand",
"phone",
"tablet"
] | Gadgets > Other Gadgets | [
"329862/images/image_1_compressed.jpg"
] | [
"329862/stls/folding_stand_v2.stl"
] | CC-BY | https://www.printables.com/model/329862 | data_0037.tar |
1655083 | Universal Plastic Lid Hanger/Holder (IKEA 365+, Lidl, No Brand, etc.) | <p>I had a collection of no brand silicone and glass containers with plastic lids like in IKEA 365+ containers and wanted to print one of the existing hanger models. I couldn't find much on printables but found some good examples on makerworld. Unfortunately all the models used too much material unnecessarily and took ... | [
"ikea",
"holder",
"lid",
"mount",
"ikea365lid",
"plasticlid"
] | Household > Kitchen | [
"1655083/images/image_1_compressed.jpg",
"1655083/images/image_2_compressed.jpg",
"1655083/images/image_3_compressed.jpg"
] | [
"1655083/stls/universal_plastic_lid_hanger.stl"
] | CC0 | https://www.printables.com/model/1655083 | data_0037.tar |
1747961 | Universal Plastic Lid Hanger/Holder (IKEA 365+, Lidl, No Brand, etc.) without Screw Holes | <p>For detailed information, please check the <a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://www.printables.com/model/1655083-universal-plastic-lid-hangerholder-ikea-365-lidl-n">original model</a>. Please only comment here regarding the missing screw holes; anything else should ... | [
"ikea",
"holder",
"lid",
"mount",
"365",
"365plus"
] | Household > Kitchen | [
"1747961/images/image_1_compressed.jpg"
] | [
"1747961/stls/universal_plastic_lid_hanger.stl"
] | CC0 | https://www.printables.com/model/1747961 | data_0037.tar |
626789 | Universal razor shower holder | <p>Designed with a spacing of 15mm between both hooks and enough space in the “inner” part, this durable razor holder fits most razors i had lying around, as long as they have a slim handle and a broader blade.</p><p>The clip fits shower walls of 4, 6 or 8mm thickness.</p><p>Printed with PLA or PETG with decent support... | [
"holder",
"hook",
"clip",
"pla",
"razor",
"petg",
"universal",
"shower"
] | Household > Bathroom | [
"626789/images/image_1_compressed.jpg",
"626789/images/image_2_compressed.jpg",
"626789/images/image_3_compressed.jpg"
] | [
"626789/stls/universal razor holder (4mm).stl",
"626789/stls/universal razor holder (6mm).stl",
"626789/stls/universal razor holder (8mm).stl"
] | CC0 | https://www.printables.com/model/626789 | data_0037.tar |
641022 | Universal Rugged Knurling Pattern Cylindrical Container | <p>Screw Top Lid Rugged Cylindrical Container Knurl Pattern.</p><p><strong>For the rest of the set go to:</strong> <a href="https://www.printables.com/model/641022-universal-rugged-knurling-pattern-cylindrical-cont">https://www.printables.com/model/641022-universal-rugged-knurling-pattern-cylindrical-cont</a></p><p><a ... | [
"box",
"organizer",
"3d",
"functional",
"holder",
"container",
"small",
"storage",
"gadget",
"storagebox",
"accessory",
"screw",
"thread",
"outdoor",
"travel",
"jar",
"knurled",
"edc"
] | Hobby & Makers > Organizers | [
"641022/images/image_1_compressed.jpg",
"641022/images/image_2_compressed.jpg",
"641022/images/image_3_compressed.jpg",
"641022/images/image_4_compressed.jpg"
] | [
"641022/stls/Body Knurling Pattern.stl",
"641022/stls/Lid Knurling Pattern.stl"
] | GPL2.0 | https://www.printables.com/model/641022 | data_0037.tar |
292286 | Universal Spool Centerer Bearingless - now with pressfit magnets | <p><i>NEW VERSION (Now with optional 6x3 press-fit magnets so it doesn't fall off the spooler when loading, and an extended version for spools that are a little wider)</i><br><br>I redesigned this specifically for the dual filament holder that I made from the link, which I love:<br><a href="https://www.printables.com/m... | [
"spool",
"filament",
"filamentspoolholder",
"filamentspoolroller",
"spooler",
"bearingless"
] | 3D Printers > Other Printer Parts & Upgrades | [
"292286/images/image_1_compressed.jpg",
"292286/images/image_2_compressed.jpg"
] | [
"292286/stls/Extended_Round_Spool_Holder.stl",
"292286/stls/Spool_Centerer_Female.stl",
"292286/stls/Spool_Centerer_Female_extended.stl",
"292286/stls/Spool_Centerer_Male.stl",
"292286/stls/Spool_Centerer_Male_extended.stl",
"292286/stls/Spool_nut.stl"
] | CC0 | https://www.printables.com/model/292286 | data_0037.tar |
270990 | Universal Steering Wheel Phone Holder |
<p>I made this simple phone holder for watching videos in the car when I wait to pick up my kid outside the school.</p>
<p>It is NOT to be used whilst driving.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Anycubic</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>All-m... | [
"car",
"phonestand",
"smartphoneholder",
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"270990/images/image_1_compressed.jpg",
"270990/images/image_2_compressed.jpg",
"270990/images/image_3_compressed.jpg",
"270990/images/image_4_compressed.jpg",
"270990/images/image_5_compressed.jpg",
"270990/images/image_6_compressed.jpg"
] | [
"270990/stls/steering_wheel_phone_holder.stl"
] | CC-BY | https://www.printables.com/model/270990 | data_0037.tar |
473025 | Universal Sun Glasses Clip Sun Visor | <p>Recommended to print this model with PETG, ABS, or ASA. Any rigid temperature-resistant filament will work best.</p> | [
"car",
"accessories",
"automotive",
"glasses",
"sunglassesholder",
"veichle"
] | Hobby & Makers > Automotive | [
"473025/images/image_1_compressed.jpg",
"473025/images/image_2_compressed.jpg"
] | [
"473025/stls/Sunglasses_Car_Holder_NO_LOGO.stl",
"473025/stls/Sunglasses_Car_Mount_V4__NO_LOGO.stl"
] | CC-BY | https://www.printables.com/model/473025 | data_0037.tar |
337236 | Universal Switchgear Cabinet Key | <p>This key is designed for electrical and other communications boxes with a square, triangle, or double barrel key holes.</p><p>Key Sizes</p><p>Square ( 5, 6, 8mm )<br>Triangle ( 9mm )<br>Double Barrel ( 3 - 5mm ) </p><p> </p><p>For added strength print 100% infill</p><p>Support required</p> | [] | Hobby & Makers > Tools | [
"337236/images/image_1_compressed.jpg",
"337236/images/image_2_compressed.jpg",
"337236/images/image_3_compressed.jpg",
"337236/images/image_4_compressed.jpg",
"337236/images/image_5_compressed.jpg",
"337236/images/image_6_compressed.jpg"
] | [
"337236/stls/universal_machine_key.stl"
] | CC0 | https://www.printables.com/model/337236 | data_0037.tar |
18736 | Universal Sword Wall Mount | <p>I have a Larp Sword I wanted to hang on my wall, but instead of just making one that only this one size sword would fit, I found an idea online for a wall mount that is adjustable in the size of the sword.</p>
<p>You only need 2 split pins (or something that will do the job of connecting the two arms to the body of ... | [
"wall",
"sword",
"mount",
"wallmount",
"wallhanger",
"swordmount",
"larp",
"larpsword",
"swordhanger"
] | Hobby & Makers > Organizers | [
"18736/images/image_1_compressed.jpg",
"18736/images/image_2_compressed.jpg",
"18736/images/image_3_compressed.jpg",
"18736/images/image_4_compressed.jpg"
] | [
"18736/stls/body.stl",
"18736/stls/left-hanger.stl",
"18736/stls/right-hanger.stl"
] | CC-BY | https://www.printables.com/model/18736 | data_0037.tar |
121120 | Universal watch stand - 18 versions [2 sizes, 3 widths, 3 patterns] | <p>Print in PLA works, but I like to print this holder in PETG to give it a little more flexibility. Use for watch, smartwatch (e.g. Open Smartwatch)</p><h3>Update: 13th January 2023</h3><p>As mentioned in the comments, I've added some more versions to the initial design. A <strong>bigger </strong>version with a bigger... | [
"holder",
"stand",
"watch"
] | Gadgets > Other Gadgets | [
"121120/images/image_1_compressed.jpg",
"121120/images/image_2_compressed.jpg",
"121120/images/image_3_compressed.jpg"
] | [
"121120/stls/WatchStand v1.stl",
"121120/stls/WatchStand_18mm_big_Hex.stl",
"121120/stls/WatchStand_18mm_big_Line.stl",
"121120/stls/WatchStand_18mm_big_Plain.stl",
"121120/stls/WatchStand_18mm_small_Hex.stl",
"121120/stls/WatchStand_18mm_small_Line.stl",
"121120/stls/WatchStand_18mm_small_Plain.stl",
... | CC-BY | https://www.printables.com/model/121120 | data_0037.tar |
125439 | Universal, Non-Destructive 1.75mm Filament Clip | <p>Please give it a ❤ if it works for you. 🤠👍</p><p>I've used a similar filament clip that holds pretty well, but I always seemed to have to trim off 1 ½ inches worth of filament because of the permanent bend after removing the clip. This one uses a similar design, but doesn't impart any lasting bend to the filament.... | [
"filament",
"clip",
"3dprinting",
"accessory"
] | 3D Printers > Accessories | [
"125439/images/image_1_compressed.jpg",
"125439/images/image_2_compressed.jpg",
"125439/images/image_3_compressed.jpg",
"125439/images/image_4_compressed.jpg"
] | [
"125439/stls/Filament_Clip_1.75_JG_v.05.stl"
] | CC0 | https://www.printables.com/model/125439 | data_0037.tar |
99266 | unsolvable riddle - 10 agorot | <p>so...what is more funny than see your friend trying to solve an unsolvable puzzle ??</p><p>make sure that you insert the coin in the middle of the print</p><p>the diameter of the coin is 22mm (thanks to ShaGa_17)</p><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Creality</p><p> </p><p><strong>Printe... | [
"puzzle",
"funny",
"troll",
"thingiverse",
"prank",
"riddle",
"israel",
"makers972",
"pranks"
] | Gadgets > Other Gadgets | [
"99266/images/image_1_compressed.jpg",
"99266/images/image_2_compressed.jpg",
"99266/images/image_3_compressed.jpg",
"99266/images/image_4_compressed.jpg",
"99266/images/image_5_compressed.jpg",
"99266/images/image_6_compressed.jpg",
"99266/images/image_7_compressed.jpg",
"99266/images/image_8_compres... | [
"99266/stls/impossibleCoinRiddle.stl"
] | CC-BY | https://www.printables.com/model/99266 | data_0037.tar |
324150 | Unusual Gem/Stone of Barenziah | <h3><strong>Stone of Barenziah </strong></h3><p><strong>The base needs support only touching build plate</strong></p><p><strong>Uses 1.75mm filament as hinge pin</strong></p><p> </p> | [
"videogame",
"skyrim",
"elderscrolls"
] | Costumes & Accessories > Props | [
"324150/images/image_1_compressed.jpg",
"324150/images/image_2_compressed.jpg",
"324150/images/image_3_compressed.jpg",
"324150/images/image_4_compressed.jpg",
"324150/images/image_5_compressed.jpg"
] | [
"324150/stls/Stone of Barenziah bottom deep.stl",
"324150/stls/Stone of Barenziah bottom shallow.stl",
"324150/stls/Stone of Barenziah half.stl",
"324150/stls/Stone of Barenziah lid.stl",
"324150/stls/Stone of Barenziah.stl"
] | CC0 | https://www.printables.com/model/324150 | data_0037.tar |
220202 | Uojimbo - utility knife | utility knife .
the overall profile is knockoff of unfolded spyderco Yojimbo 2. | Download free 3D printable STL models | [
"utility",
"utilityknife",
"spyderco",
"utilityblade",
"yojimbo"
] | Toys & Games > Outdoor Toys | [
"220202/images/image_1_compressed.jpg",
"220202/images/image_2_compressed.jpg",
"220202/images/image_3_compressed.jpg",
"220202/images/image_4_compressed.jpg",
"220202/images/image_5_compressed.jpg",
"220202/images/image_6_compressed.jpg"
] | [
"220202/stls/handle.stl",
"220202/stls/sheath_a.stl",
"220202/stls/sheath_b.stl",
"220202/stls/sheath_locker.stl"
] | CC0 | https://www.printables.com/model/220202 | data_0037.tar |
707588 | Update! - Stackable battery box (AA - AAA - 9V Blocks - CR2XX) | <p>Deutsch:<br>Inspiriert durch das Design von Marzochi (<a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://www.thingiverse.com/thing:5389119">https://www.thingiverse.com/thing:5389119</a>) habe ich meinen eigenen Bateriehalter gemacht.</p><p>Er ist stabiler und auch stapelbar. Eine... | [
"battery",
"batterycase",
"batteries",
"batterybox"
] | Hobby & Makers > Organizers | [
"707588/images/image_1_compressed.jpg",
"707588/images/image_2_compressed.jpg",
"707588/images/image_3_compressed.jpg",
"707588/images/image_4_compressed.jpg",
"707588/images/image_5_compressed.jpg",
"707588/images/image_6_compressed.jpg",
"707588/images/image_7_compressed.jpg"
] | [
"707588/stls/9V_Battery-Box.stl",
"707588/stls/AAA_Battery-Box.stl",
"707588/stls/AA_Battery-Box.stl",
"707588/stls/CR2032.stl",
"707588/stls/CR2450.stl",
"707588/stls/CR2x_Battery-Box.stl"
] | CC0 | https://www.printables.com/model/707588 | data_0037.tar |
249290 | UPDATED - Voron 2.4 CW2 (RC1) Filament Runout Sensor Mod | <p>I print big things and the thought of wasting filament and time because suddenly, in the middle of the night, the filament runs out, is not something I am fond of. So I created a simple filament sensor mod for Voron's CW2 (RC1), using a 5.5mm steel ball and a microswitch.</p><p>The microswitch is a pretty common one... | [
"filamentsensor",
"clockwork",
"voron",
"cw2"
] | 3D Printers > Voron Parts & Upgrades | [
"249290/images/image_1_compressed.jpg",
"249290/images/image_2_compressed.jpg"
] | [
"249290/stls/Clockwork2_main_body v9.stl"
] | GPL3.0 | https://www.printables.com/model/249290 | data_0037.tar |
1484702 | Updated LID Lowes Mini Box (Teeny Tote) with Original Lid and Flat Lid | <p>Updated the lid to make sure it fit the bottom of box. Lowes Mini Box. Flat lid included allowing you to add text in slicer of what is in the box! The indentations in the bottom of the box is 1 mm and your printer has to be able to print right side up. You can print upside down and that is about the same amount of f... | [
"box",
"lid",
"black",
"yellow",
"storagebox",
"tote",
"storagebin",
"lowes",
"teeny",
"teenytote"
] | Hobby & Makers > Organizers | [
"1484702/images/image_1_compressed.jpg",
"1484702/images/image_2_compressed.jpg",
"1484702/images/image_3_compressed.jpg",
"1484702/images/image_4_compressed.jpg",
"1484702/images/image_5_compressed.jpg",
"1484702/images/image_6_compressed.jpg",
"1484702/images/image_7_compressed.jpg"
] | [
"1484702/stls/Black Yellow Box.stl",
"1484702/stls/Yellow Lid Flat.stl",
"1484702/stls/YellowBoxLidUpdated.stl"
] | CC0 | https://www.printables.com/model/1484702 | data_0037.tar |
229642 | Updated parametric wall holder for remote control | <p>Updated parametric holder of egil's model.</p><p>Features added:</p><ul><li>mounting screw holes can be switch off for mounting with double sided tape</li><li>the corners of the cut-out section can be cut off (or not) to make inserting the remote easier</li><li>the detail of the render can be chosen. (higher quality... | [
"organizer",
"wallmount",
"remote",
"customizer",
"remotecontrol",
"thingiverse"
] | Household > Living Room | [
"229642/images/image_1_compressed.jpg",
"229642/images/image_2_compressed.jpg",
"229642/images/image_3_compressed.jpg"
] | [
"229642/stls/remote_holder_updated.stl"
] | CC-BY | https://www.printables.com/model/229642 | data_0037.tar |
134733 | UPDATED Satsana 5015+4020 fan+BLTouch for Ender 3 / Ender 3 Pro | <h4>Updates:</h4><p>I made following changes to my Satsana 5015 remix for 4020 fans and BLTouch:</p><ul><li>Changed the position and the mount for the BLTouch. The mount is now on the left side and fully integrated into the shroud.<br>Change the X, Y, Z offsets to:<br><code>#define NOZZLE_TO_PROBE_OFFSET { -52, -11, 0 ... | [
"fanguard",
"fanshroud",
"ender3",
"directdrive",
"bltouch",
"ender3pro",
"microswiss",
"4020fan",
"satsana5015bltouch",
"satsana"
] | 3D Printers > Creality Parts & Upgrades | [
"134733/images/image_1_compressed.jpg"
] | [
"134733/stls/fan_guard_hexagons.stl",
"134733/stls/Satsana_Ender_3_BLTouch_left_v2.stl",
"134733/stls/Satsana_Ender_3_cable_cap_v2.stl"
] | CC-BY | https://www.printables.com/model/134733 | data_0037.tar |
337101 | UPDATED! Custom Organic Support Example | <p>This is an example of Tree or Organic supports with <strong>custom settings</strong>.</p><p>Default infill and support settings aren't always the most optimal. In this example, the custom support settings I've created in the included .3mf file, the <strong>print time</strong> is <strong>reduced by one hour!</strong>... | [
"organic",
"benchy",
"alien"
] | 3D Printers > Test Models | [
"337101/images/image_1_compressed.jpg",
"337101/images/image_2_compressed.jpg",
"337101/images/image_3_compressed.jpg",
"337101/images/image_4_compressed.jpg",
"337101/images/image_5_compressed.jpg",
"337101/images/image_6_compressed.jpg"
] | [
"337101/stls/Xenomorph.stl"
] | CC0 | https://www.printables.com/model/337101 | data_0037.tar |
555034 | Updated! MGN Rail Greasing Tool V2 | <p>New version from our friend Nappen, this time with a syringe attachment directly to the thingey and a step file. Neato!</p><p>Simple tool made by Nappen, unfortunately he's unable to upload and people wanted this uploaded and Nappen said it was ok, so here we are. </p><p>Print and use a syringe or similar to in... | [
"mgn9",
"mgn9h",
"mgn12h",
"mgn12",
"linearrail",
"greaseinjector",
"mgn12c",
"mgn9c",
"mgn7h",
"mgn7"
] | 3D Printers > Accessories | [
"555034/images/image_1_compressed.jpg",
"555034/images/image_2_compressed.jpg"
] | [
"555034/stls/mgn12greaser.stl",
"555034/stls/mgn7greaser.stl",
"555034/stls/mgn9greaser.stl",
"555034/stls/mgn_greeser_v2.stl"
] | CC0 | https://www.printables.com/model/555034 | data_0037.tar |
70314 | UPDATED! V2 Base - Setup Blocks for Woodworking Power Tools (Imperial measurements) | <p><strong>****************</strong><br>If you <em>download </em>💾<em> </em>or <em>collect </em>🗄<em> </em>please hit the <strong>LIKE 👍 </strong>button. 😀</p><p>If you <em>print </em>🖨<em> </em>it post a <strong>picture 📷 </strong>/ <strong>MAKE</strong>! 😄 Let me know how it works for you.❔ 🙂</p><p>Don't forg... | [
"block",
"measurement",
"setup"
] | Hobby & Makers > Mechanical Parts | [
"70314/images/image_1_compressed.jpg",
"70314/images/image_2_compressed.jpg"
] | [
"70314/stls/setup blocks 1_2_in.stl",
"70314/stls/setup blocks 1_4th.stl",
"70314/stls/setup blocks 1_8th.stl",
"70314/stls/setup blocks 1_in.stl",
"70314/stls/setup blocks 3_16th.stl",
"70314/stls/setup blocks 3_4th.stl",
"70314/stls/setup blocks 3_8th.stl",
"70314/stls/setup blocks 5_16th.stl",
"7... | CC-BY | https://www.printables.com/model/70314 | data_0037.tar |
839248 | Updated: Razer Kraken V3 HyperSense headphone slider replacements | <p>The self tap option print best and works well, mine has been lasting since April 2024. <br><br>The screw and nut option was made on user requests and results in very thin walls in some areas. See detailed notes from users in makes. </p><p>The slider adjusters on my Razer Kraken V3 HyperSense headphone brok... | [
"headphone",
"replacement",
"slider",
"kraken",
"razer",
"razerkraken",
"hypersense"
] | Gadgets > Audio | [
"839248/images/image_1_compressed.jpg",
"839248/images/image_2_compressed.jpg",
"839248/images/image_3_compressed.jpg",
"839248/images/image_4_compressed.jpg",
"839248/images/image_5_compressed.jpg",
"839248/images/image_6_compressed.jpg",
"839248/images/image_7_compressed.jpg",
"839248/images/image_8... | [
"839248/stls/headphone slider clip cover.stl",
"839248/stls/headphone slider clip.stl",
"839248/stls/razen kraken headphone slider clip v2.stl",
"839248/stls/razen kraken headphone slider clip v3.stl"
] | GPL3.0 | https://www.printables.com/model/839248 | data_0037.tar |
672522 | Upgrade for Spool Holder for Elegoo Neptune 4 / 4 pro | <p>The elegoo neptune 4 and 4 pro are budget printers, as such elegoo cutted some corners to make it affortable, one of such corners is the spool holder, it is just a piece of plastic you screw in and put your spool of filament on, the problem is that in this way not only the spool doesn't rotate properly but if you ha... | [] | 3D Printers > Other Printer Parts & Upgrades | [
"672522/images/image_1_compressed.jpg",
"672522/images/image_2_compressed.jpg",
"672522/images/image_3_compressed.jpg",
"672522/images/image_4_compressed.jpg"
] | [
"672522/stls/SpoolHolderx1.stl",
"672522/stls/Spool_Holderx2.stl"
] | GPL3.0 | https://www.printables.com/model/672522 | data_0037.tar |
338244 | Upgraded fan duct (exposed print head setup) for Anycubic Kobra Go | <p>You'll be able to replace your original print head housing with this exposed print head setup using only the original screws.<br>SETTINGS: Slice the model upside-down (see photo) with a tree structure support in a zig zag pattern only touching build plate with a 1mm x/y distance and a 50 degree overhang angle.<br>AS... | [
"upgrade",
"go",
"fan",
"duct",
"anycubic",
"kobra"
] | 3D Printers > Anycubic Parts & Upgrades | [
"338244/images/image_1_compressed.jpg",
"338244/images/image_2_compressed.jpg",
"338244/images/image_3_compressed.jpg",
"338244/images/image_4_compressed.jpg",
"338244/images/image_5_compressed.jpg",
"338244/images/image_6_compressed.jpg"
] | [
"338244/stls/all in one i2.stl"
] | CC0 | https://www.printables.com/model/338244 | data_0037.tar |
209686 | upholstery clip 4mm / prichytka calouneni 4mm | <p>prichytka calouneni dveri auta.</p><p>ve sliceru je třeba nastavit “detekce tenkých stěn” aby se správně vytvořila první vrstva včetně křidýlek.</p><p>Pokud potřebujete úchytku upravit, zde je zdroj <a href="https://www.tinkercad.com/things/ddFXnxxtSBB-autocudl">https://www.tinkercad.com/things/ddFXnxxtSBB-autocudl<... | [
"clip",
"car",
"auto",
"upholstery",
"calouneni"
] | Hobby & Makers > Automotive | [
"209686/images/image_1_compressed.jpg"
] | [
"209686/stls/AutoCudl.stl"
] | CC0 | https://www.printables.com/model/209686 | data_0037.tar |
211728 | upholstery clip 8mm / prichytka calouneni 8mm | <p>Příchytka na čalounění - dočasně trvalé řešení zlomené příchytky. Tisknuto z PET-G a drží (z PLA praskla).</p><p>Temporary (forever) solution. I printed it from PET-G and works fine (or ABS/ASA should be OK, from PLA it cracks - too fragile material) </p> | [
"clip",
"car",
"auto",
"prichytka",
"upholstery"
] | Hobby & Makers > Automotive | [
"211728/images/image_1_compressed.jpg"
] | [
"211728/stls/pouzdro.stl",
"211728/stls/trn.stl"
] | CC0 | https://www.printables.com/model/211728 | data_0037.tar |
114547 | Uppercase Letters (IR Blinx) - Split Letters (Remix) | I just split all letters up to use as Modifiers in Prusa Slicer 2.4.0
Enjoy. :) | Download free 3D printable STL models | [
"modifiermesh",
"alphabet",
"letters",
"modifier",
"3dlettering",
"3dletters"
] | 3D Printers > Test Models | [
"114547/images/image_1_compressed.jpg"
] | [
"114547/stls/A.stl",
"114547/stls/B.stl",
"114547/stls/C.stl",
"114547/stls/D.stl",
"114547/stls/E.stl",
"114547/stls/F.stl",
"114547/stls/G.stl",
"114547/stls/H.stl",
"114547/stls/I.stl",
"114547/stls/J.stl",
"114547/stls/K.stl",
"114547/stls/L.stl",
"114547/stls/M.stl",
"114547/stls/N.st... | CC0 | https://www.printables.com/model/114547 | data_0037.tar |
244958 | Upscaled Lego Cup | <p>This is an almost exact copy of a lego cup, except it's scaled up 12 times to fit humans!</p><p>Supports are really only necessary for the underside of the handle and the bottom edge of the cup.</p><p>It is not recommended to use for drinking because due to the layers in the print.</p> | [
"cup",
"prop",
"lego",
"scaled"
] | Costumes & Accessories > Props | [
"244958/images/image_1_compressed.jpg"
] | [
"244958/stls/Lego_cup.stl"
] | CC-BY | https://www.printables.com/model/244958 | data_0037.tar |
1261482 | Upside down "PRAKI" cereal container dry box (version 2) | <h3>TL;DR</h3><p>Print with 0.20 mm layer hight, 0.4 mm nozzle, no supports.</p><h5>Printing version 2:</h5><ul><li>1x bottom frame, either with one or two connectors</li><li>1x inner frame (better choose a slow profile, it tends to warp due to low bed adhesion on front side)</li><li>1x dessicant bin cover</li><li>2x i... | [
"box",
"drybox",
"dry",
"cereal",
"cerealbox",
"praki"
] | 3D Printers > Accessories | [
"1261482/images/image_1_compressed.jpg",
"1261482/images/image_10_compressed.jpg",
"1261482/images/image_2_compressed.jpg",
"1261482/images/image_3_compressed.jpg",
"1261482/images/image_4_compressed.jpg",
"1261482/images/image_5_compressed.jpg",
"1261482/images/image_6_compressed.jpg",
"1261482/image... | [
"1261482/stls/bottom-frame (outdated).stl",
"1261482/stls/bottom-frame-one-connector (outdated).stl",
"1261482/stls/bottom-frame-one-connector-v2.stl",
"1261482/stls/bottom-frame-two-connector-v2.stl",
"1261482/stls/dessicant-bin-cover-v2.stl",
"1261482/stls/dessicant-cover (outdated).stl",
"1261482/stl... | CC-BY | https://www.printables.com/model/1261482 | data_0037.tar |
255334 | Upside-Down Magic Dritten | <p>The first thing my daughter asked for when I got a 3d printer was a dritten. Unfortunately, I didn't find one anywhere. After getting things set up and doing some prints, I decided it was time to try to make one.</p><p>I found some good starting points with the <a href="https://www.printables.com/prints/93957-kitten... | [
"dragon",
"kitten",
"nory",
"upsidedownmagic",
"dritten"
] | Toys & Games > Action Figures & Statues | [
"255334/images/image_1_compressed.jpg",
"255334/images/image_2_compressed.jpg",
"255334/images/image_3_compressed.jpg"
] | [
"255334/stls/dritten.stl"
] | CC-BY | https://www.printables.com/model/255334 | data_0037.tar |
1584280 | Urban Card Kit - Fork, Spoon, Knife, Toothpick | <p>This simple but clever print might come in handy one day. It includes a fork, spoon, knife (with a serrated edge), and a toothpick. Additionally, it comes with a clip that is made to hold everything together after its been disassembled. This kit fits inside your wallet and is no larger than your credit card. </... | [
"kitchen",
"tool",
"knife",
"wallet",
"accessory",
"outdoor",
"spoon",
"toothpick",
"camping",
"useful",
"fork",
"urban",
"cardkit"
] | Hobby & Makers > Tools | [
"1584280/images/image_1_compressed.jpg"
] | [
"1584280/stls/FSK Card Kit.stl"
] | CC-BY | https://www.printables.com/model/1584280 | data_0037.tar |
525182 | Urban Survival Card | <p>Fork,Button,Bread clip,Kart coin,clips,bobby pin,paper clip,needle, tooth pick</p> | [
"card",
"kit",
"fork"
] | Gadgets > Other Gadgets | [
"525182/images/image_1_compressed.jpg",
"525182/images/image_2_compressed.jpg"
] | [
"525182/stls/Card Gadget (1).stl"
] | CC0 | https://www.printables.com/model/525182 | data_0037.tar |
1268755 | Urinal Splash Screens, Trump, Putin, Musk, Vance | <p><strong>Men of the World! Stand together and make your mark.</strong> <br>Show your appreciation with this urinal splash screen set. Featuring black and white portraits of four of our favorite folks—Donald Trump, J.D. Vance, Elon Musk, and Vladimir Putin<br>These screens are designed to aid relaxation (and exce... | [
"musk",
"screen",
"trump",
"restroom",
"putin",
"splash",
"urinal",
"vance"
] | Household > Bathroom | [
"1268755/images/image_1_compressed.jpg",
"1268755/images/image_2_compressed.jpg",
"1268755/images/image_3_compressed.jpg",
"1268755/images/image_4_compressed.jpg",
"1268755/images/image_5_compressed.jpg"
] | [
"1268755/stls/MuskVerticalSlot.stl",
"1268755/stls/PutinVerticalSlot.stl",
"1268755/stls/TrumpVerticalSlot.stl",
"1268755/stls/VanceVerticalSlot.stl"
] | CC0 | https://www.printables.com/model/1268755 | data_0037.tar |
504219 | US Coin Currency Sorter | <p>Used to sort US coins in multiples of ten, so they can be then stored in rolls.<br>Never again mess up the amount of coins in a roll!<br>I printed mine at a 0.15 layer height with 10% infill but I'm sure you can get away with a bigger layer height.<br>Enjoy and follow us @CADMASTERS3D in Instagram for the most recen... | [
"coin",
"money",
"coins",
"usa",
"coinholder",
"states",
"cash",
"united",
"rolls",
"us",
"coinroll"
] | Hobby & Makers > Tools | [
"504219/images/image_1_compressed.jpg",
"504219/images/image_2_compressed.jpg",
"504219/images/image_3_compressed.jpg",
"504219/images/image_4_compressed.jpg"
] | [
"504219/stls/US Currency Coin Sorter.stl"
] | CC-BY | https://www.printables.com/model/504219 | data_0037.tar |
556106 | US Coin Wallet | <p>Organizes US coins for making quick change. Prints in three parts and needs no supports. Added a slimmer version as well.</p> | [] | Household > Other House Equipment | [
"556106/images/image_1_compressed.jpg",
"556106/images/image_2_compressed.jpg",
"556106/images/image_3_compressed.jpg"
] | [
"556106/stls/Coin Wallet - Slim.stl",
"556106/stls/Coin Wallet.stl"
] | CC-BY | https://www.printables.com/model/556106 | data_0037.tar |
84093 | US Quarter Shopping Cart Coin (Aldi Super Market) |
<p>US Quarter Size<br/>
Shopping Cart Token / Coin<br/>
Reusable / Removable<br/>
Key Ring Attachable</p>
<p>For supermarket shopping carts... Aldi etc.</p>
<p>Customized version of <a href="https://www.thingiverse.com/thing:93346">http://www.thingiverse.com/thing:93346</a></p>
<p>Created with Customizer! <a href... | [
"thingiverse",
"customized"
] | Hobby & Makers > Tools | [
"84093/images/image_1_compressed.jpg"
] | [
"84093/stls/supermarketcoin_20170318-16085-xudyo-0.stl"
] | CC-BY | https://www.printables.com/model/84093 | data_0037.tar |
499970 | US SOLDIER | <p>Remember those small green plastic soldiers of our childhood? This is my interpretation of those toys in a Playaction fashion.</p> | [
"toy",
"actionfigure",
"soldier",
"plasticsoldier"
] | Toys & Games > Action Figures & Statues | [
"499970/images/image_1_compressed.jpg"
] | [
"499970/stls/arms.stl",
"499970/stls/body.stl",
"499970/stls/COLT.stl",
"499970/stls/HAIR.stl",
"499970/stls/hands.stl",
"499970/stls/head.stl",
"499970/stls/helmet.stl",
"499970/stls/INSERT.stl",
"499970/stls/legs.stl",
"499970/stls/Thompson.stl"
] | CC0 | https://www.printables.com/model/499970 | data_0037.tar |
200676 | US, Canada, Scotland Trailer Hitch Covers - Remix |
<p>This is another remix of the pro-Trump trailer hitch cover by someusernamehere that keeps getting removed. I wasn't a fan of the message but I really like the design, so I decided to remix it into something that makes a better statement. I doubt that you'll ever see the original because, lets face it, 'Let's go B... | [
"hitch",
"trailer",
"flag",
"thingiverse",
"receiverhitchcover",
"canadianflag",
"canadianmapleleaf",
"scotlandflag",
"americanflag",
"trailerhitch"
] | Toys & Games > Vehicles | [
"200676/images/image_1_compressed.jpg",
"200676/images/image_2_compressed.jpg",
"200676/images/image_3_compressed.jpg"
] | [
"200676/stls/cda_flag.stl",
"200676/stls/scottish_flag.stl",
"200676/stls/usflag.stl"
] | CC-BY | https://www.printables.com/model/200676 | data_0037.tar |
432434 | USA Shopping Cart Coin Key | <p>Coin/Key for <strong>USA </strong>shopping cart (remixed from Euro-coin key). Form factor approx a quarter coin, compatible with most carts. Easy to put on a keychain and you can pull it out when the cart is unlocked with most systems.</p><p> </p><p>I have NOT tried this yet, but I'm thinking it'll work. ... | [] | Hobby & Makers > Tools | [
"432434/images/image_1_compressed.jpg"
] | [
"432434/stls/Shopping Cart Key (USA) v2.stl"
] | CC-BY | https://www.printables.com/model/432434 | data_0037.tar |
895281 | USAF Font Stencil | <p>This 3D model features a highly detailed stencil designed in the iconic Air Force font, ideal for achieving precise and professional lettering on a variety of surfaces. The stencil is perfect for use in projects requiring a bold, military-style aesthetic. Whether you're creating signs, customizing equipment, or addi... | [
"model",
"stencil",
"military",
"airforce"
] | Art & Design > 2D Plates & Logos | [
"895281/images/image_1_compressed.jpg",
"895281/images/image_2_compressed.jpg"
] | [
"895281/stls/USAF Stencil v2.stl"
] | CC-BY | https://www.printables.com/model/895281 | data_0037.tar |
503912 | USB & (Micro-)SD holder for Ikea Skadis / SKÅDIS | <p>Holds your Flash storage on your Skadis board.</p><p>Print orientation as-is, I used 4 walls on mine to give it a little strength, add regular support from the buildplate for the hooks and it should print pretty easy.</p><p> </p><p>My settings:</p><p>-Ender 3 v2</p><p>-eSun Pla+ 215°C, 50°Bed</p><p>-0.2 layer h... | [
"organiser",
"usb",
"organization",
"sdcard",
"microsd",
"sdcardholder",
"usbholder",
"skadis",
"usbstick",
"microsdcardholder",
"skadisikea",
"tfcard",
"tfcardholder"
] | Gadgets > Computers | [
"503912/images/image_1_compressed.jpg"
] | [
"503912/stls/UsbSdHolder.stl"
] | CC0 | https://www.printables.com/model/503912 | data_0037.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.